public inbox for stable@vger.kernel.org
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: "Łukasz Spintzyk" <lukasz.spintzyk@synaptics.com>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Paolo Abeni" <pabeni@redhat.com>,
	"Sasha Levin" <sashal@kernel.org>,
	linux-usb@vger.kernel.org
Subject: [PATCH AUTOSEL 5.10 37/46] net/cdc_ncm: Increase NTB max RX/TX values to 64kb
Date: Thu, 11 Aug 2022 12:04:01 -0400	[thread overview]
Message-ID: <20220811160421.1539956-37-sashal@kernel.org> (raw)
In-Reply-To: <20220811160421.1539956-1-sashal@kernel.org>

From: Łukasz Spintzyk <lukasz.spintzyk@synaptics.com>

[ Upstream commit 5588d628027092e66195097bdf6835ddf64418b3 ]

DisplayLink ethernet devices require NTB buffers larger then 32kb
in order to run with highest performance.

This patch is changing upper limit of the rx and tx buffers.
Those buffers are initialized with CDC_NCM_NTB_DEF_SIZE_RX and
CDC_NCM_NTB_DEF_SIZE_TX which is 16kb so by default no device is
affected by increased limit.

Rx and tx buffer is increased under two conditions:
 - Device need to advertise that it supports higher buffer size in
   dwNtbMaxInMaxSize and dwNtbMaxOutMaxSize.
 - cdc_ncm/rx_max and cdc_ncm/tx_max driver parameters must be adjusted
   with udev rule or ethtool.

Summary of testing and performance results:
Tests were performed on following devices:
 - DisplayLink DL-3xxx family device
 - DisplayLink DL-6xxx family device
 - ASUS USB-C2500 2.5G USB3 ethernet adapter
 - Plugable USB3 1G USB3 ethernet adapter
 - EDIMAX EU-4307 USB-C ethernet adapter
 - Dell DBQBCBC064 USB-C ethernet adapter

Performance measurements were done with:
 - iperf3 between two linux boxes
 - http://openspeedtest.com/ instance running on local test machine

Insights from tests results:
 - All except one from third party usb adapters were not affected by
   increased buffer size to their advertised dwNtbOutMaxSize and
   dwNtbInMaxSize.
   Devices were generally reaching 912-940Mbps both download and upload.

   Only EDIMAX adapter experienced decreased download size from
   929Mbps to 827Mbps with iper3, with openspeedtest decrease was from
   968Mbps to 886Mbps.

 - DisplayLink DL-3xxx family devices experienced performance increase
   with iperf3 download from 300Mbps to 870Mbps and
   upload from 782Mbps to 844Mbps.
   With openspeedtest download increased from 556Mbps to 873Mbps
   and upload from 727Mbps to 973Mbps

 - DiplayLink DL-6xxx family devices are not affected by
   increased buffer size.

Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@synaptics.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220720060518.541-2-lukasz.spintzyk@synaptics.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/usb/cdc_ncm.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/linux/usb/cdc_ncm.h b/include/linux/usb/cdc_ncm.h
index 0ce4377545f8..20a8ab9272d8 100644
--- a/include/linux/usb/cdc_ncm.h
+++ b/include/linux/usb/cdc_ncm.h
@@ -53,8 +53,8 @@
 #define USB_CDC_NCM_NDP32_LENGTH_MIN		0x20
 
 /* Maximum NTB length */
-#define	CDC_NCM_NTB_MAX_SIZE_TX			32768	/* bytes */
-#define	CDC_NCM_NTB_MAX_SIZE_RX			32768	/* bytes */
+#define	CDC_NCM_NTB_MAX_SIZE_TX			65536	/* bytes */
+#define	CDC_NCM_NTB_MAX_SIZE_RX			65536	/* bytes */
 
 /* Initial NTB length */
 #define	CDC_NCM_NTB_DEF_SIZE_TX			16384	/* bytes */
-- 
2.35.1


  parent reply	other threads:[~2022-08-11 16:27 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-11 16:03 [PATCH AUTOSEL 5.10 01/46] drm/r128: Fix undefined behavior due to shift overflowing the constant Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 02/46] ath10k: htt_tx: do not interpret Eth frames as WiFi Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 03/46] ath10k: fix misreported tx bandwidth for 160Mhz Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 04/46] drm/nouveau: clear output poll workers before nouveau_fbcon_destroy() Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 05/46] drm/panfrost: Handle HW_ISSUE_TTRX_2968_TTRX_3162 Sasha Levin
2022-08-13 13:44   ` Pavel Machek
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 06/46] drm/panfrost: Don't set L2_MMU_CONFIG quirks Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 07/46] ath10k: fix regdomain info of iw reg set/get Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 08/46] drm/amd/display: Detect dpcd_rev when hotplug mst monitor Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 09/46] drm/amd/display: Fix dpp dto for disabled pipes Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 10/46] drm/radeon: integer overflow in radeon_mode_dumb_create() Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 11/46] drm/radeon: Initialize fences array entries in radeon_sa_bo_next_hole Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 12/46] udmabuf: Set the DMA mask for the udmabuf device (v2) Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 13/46] net/mlx5: Add HW definitions of vport debug counters Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 14/46] drm/amd/display: Fix monitor flash issue Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 15/46] selftests: mlxsw: resource_scale: Allow skipping a test Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 16/46] net: dsa: ar9331: fix potential dead lock on mdio access Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 17/46] media: davinci: vpif: add missing of_node_put() in vpif_probe() Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 18/46] media: mediatek: vcodec: prevent kernel crash when scp ipi timeout Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 19/46] media: airspy: respect the DMA coherency rules Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 20/46] media: pvrusb2: fix memory leak in pvr_probe Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 21/46] rcu: Apply noinstr to rcu_idle_enter() and rcu_idle_exit() Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 22/46] drm/bridge/tc358775: Fix DSI clock division for vsync delay calculation Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 23/46] uprobe: gate bpf call behind BPF_EVENTS Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 24/46] rcuscale: Fix smp_processor_id()-in-preemptible warnings Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 25/46] mlxsw: cmd: Increase 'config_profile.flood_mode' length Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 26/46] media: atmel: atmel-isc-base: allow wb ctrls to be changed when isc is not configured Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 27/46] kselftests: Enable the echo command to print newlines in Makefile Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 28/46] ipv6/addrconf: fix timing bug in tempaddr regen Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 29/46] drm/amdgpu/display/dc: Fix null pointer exception Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 30/46] crypto: vmx - Fix warning on p8_ghash_alg Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 31/46] drm/nouveau/nvkm: use list_add_tail() when building object tree Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 32/46] crypto: ccree - Add missing clk_disable_unprepare() in cc_pm_resume() Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 33/46] bpf: Fix check against plain integer v 'NULL' Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 34/46] media: rkisp1: Disable runtime PM in probe error path Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 35/46] bpf: Don't redirect packets with invalid pkt_len Sasha Levin
2022-08-11 16:04 ` [PATCH AUTOSEL 5.10 36/46] can: sja1000: Add Quirk for RZ/N1 SJA1000 CAN controller Sasha Levin
2022-08-11 16:04 ` Sasha Levin [this message]
2022-08-11 16:04 ` [PATCH AUTOSEL 5.10 38/46] Bluetooth: hci_bcm: Add BCM4349B1 variant Sasha Levin
2022-08-11 16:04 ` [PATCH AUTOSEL 5.10 39/46] Bluetooth: Collect kcov coverage from hci_rx_work Sasha Levin
2022-08-11 16:04 ` [PATCH AUTOSEL 5.10 40/46] bpf/selftests: Fix couldn't retrieve pinned program in xdp veth test Sasha Levin
2022-08-11 16:04 ` [PATCH AUTOSEL 5.10 41/46] net: ethernet: stmicro: stmmac: first disable all queues and disconnect in release Sasha Levin
2022-08-11 16:04 ` [PATCH AUTOSEL 5.10 42/46] wifi: rtl8xxxu: Fix the error handling of the probe function Sasha Levin
2022-08-12 19:06 ` [PATCH AUTOSEL 5.10 01/46] drm/r128: Fix undefined behavior due to shift overflowing the constant Pavel Machek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220811160421.1539956-37-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=lukasz.spintzyk@synaptics.com \
    --cc=pabeni@redhat.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox