From: Jimmy Assarsson <extja@kvaser.com>
To: linux-can@vger.kernel.org, Marc Kleine-Budde <mkl@pengutronix.de>,
Anssi Hannula <anssi.hannula@bitwise.fi>
Cc: Jimmy Assarsson <jimmyassarsson@gmail.com>,
stable@vger.kernel.org, Jimmy Assarsson <extja@kvaser.com>
Subject: [PATCH v3 12/15] can: kvaser_usb_leaf: Ignore stale bus-off after start
Date: Thu, 1 Sep 2022 14:27:26 +0200 [thread overview]
Message-ID: <20220901122729.271-13-extja@kvaser.com> (raw)
In-Reply-To: <20220901122729.271-1-extja@kvaser.com>
From: Anssi Hannula <anssi.hannula@bitwise.fi>
With 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778 it was observed
that if the device was bus-off when stopped, at next start (either via
interface down/up or manual bus-off restart) the initial
CMD_CHIP_STATE_EVENT received just after CMD_START_CHIP_REPLY will have
the M16C_STATE_BUS_OFF bit still set, causing the interface to
immediately go bus-off again.
The bit seems to internally clear quickly afterwards but we do not get
another CMD_CHIP_STATE_EVENT.
Fix the issue by ignoring any initial bus-off state until we see at
least one bus-on state. Also, poll the state periodically until that
occurs.
It is possible we lose one actual immediately occurring bus-off event
here in which case the HW will auto-recover and we see the recovery
event. We will then catch the next bus-off event, if any.
This issue did not reproduce with 0bfd:0017 Kvaser Memorator
Professional HS/HS FW 2.0.50.
Cc: stable@vger.kernel.org
Fixes: 71873a9b38d1 ("can: kvaser_usb: Add support for more Kvaser Leaf v2 devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
---
Changes in v3:
- Rebased on 1d5eeda23f36 ("can: kvaser_usb: advertise timestamping capabilities and add ioctl support")
- Add stable to CC
- Add S-o-b
Changes in v2:
- Rebased on b3b6df2c56d8 ("can: kvaser_usb: kvaser_usb_leaf: fix bittiming limits")
.../net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 31 ++++++++++++++++++-
1 file changed, 30 insertions(+), 1 deletion(-)
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
index 4f9c76f4d0da..f8a12a285050 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
@@ -427,6 +427,9 @@ struct kvaser_usb_net_leaf_priv {
struct kvaser_usb_net_priv *net;
struct delayed_work chip_state_req_work;
+
+ /* started but not reported as bus-on yet */
+ bool joining_bus;
};
static const struct can_bittiming_const kvaser_usb_leaf_m16c_bittiming_const = {
@@ -966,6 +969,7 @@ kvaser_usb_leaf_rx_error_update_can_state(struct kvaser_usb_net_priv *priv,
const struct kvaser_usb_err_summary *es,
struct can_frame *cf)
{
+ struct kvaser_usb_net_leaf_priv *leaf = priv->sub_priv;
struct kvaser_usb *dev = priv->dev;
struct net_device_stats *stats = &priv->netdev->stats;
enum can_state cur_state, new_state, tx_state, rx_state;
@@ -990,6 +994,22 @@ kvaser_usb_leaf_rx_error_update_can_state(struct kvaser_usb_net_priv *priv,
new_state = CAN_STATE_ERROR_ACTIVE;
}
+ /* 0bfd:0124 FW 4.18.778 was observed to send the initial
+ * CMD_CHIP_STATE_EVENT after CMD_START_CHIP with M16C_STATE_BUS_OFF
+ * bit set if the channel was bus-off when it was last stopped (even
+ * across chip resets). This bit will clear shortly afterwards, without
+ * triggering a second unsolicited chip state event.
+ * Ignore this initial bus-off.
+ */
+ if (leaf->joining_bus) {
+ if (new_state == CAN_STATE_BUS_OFF) {
+ netdev_dbg(priv->netdev, "ignoring bus-off during startup");
+ new_state = cur_state;
+ } else {
+ leaf->joining_bus = false;
+ }
+ }
+
if (new_state != cur_state) {
tx_state = (es->txerr >= es->rxerr) ? new_state : 0;
rx_state = (es->txerr <= es->rxerr) ? new_state : 0;
@@ -1065,9 +1085,12 @@ static void kvaser_usb_leaf_rx_error(const struct kvaser_usb *dev,
/* If there are errors, request status updates periodically as we do
* not get automatic notifications of improved state.
+ * Also request updates if we saw a stale BUS_OFF during startup
+ * (joining_bus).
*/
if (new_state < CAN_STATE_BUS_OFF &&
- (es->rxerr || es->txerr || new_state == CAN_STATE_ERROR_PASSIVE))
+ (es->rxerr || es->txerr || new_state == CAN_STATE_ERROR_PASSIVE ||
+ leaf->joining_bus))
schedule_delayed_work(&leaf->chip_state_req_work,
msecs_to_jiffies(500));
@@ -1587,8 +1610,11 @@ static int kvaser_usb_leaf_set_opt_mode(const struct kvaser_usb_net_priv *priv)
static int kvaser_usb_leaf_start_chip(struct kvaser_usb_net_priv *priv)
{
+ struct kvaser_usb_net_leaf_priv *leaf = priv->sub_priv;
int err;
+ leaf->joining_bus = true;
+
reinit_completion(&priv->start_comp);
err = kvaser_usb_leaf_send_simple_cmd(priv->dev, CMD_START_CHIP,
@@ -1719,12 +1745,15 @@ static int kvaser_usb_leaf_set_mode(struct net_device *netdev,
enum can_mode mode)
{
struct kvaser_usb_net_priv *priv = netdev_priv(netdev);
+ struct kvaser_usb_net_leaf_priv *leaf = priv->sub_priv;
int err;
switch (mode) {
case CAN_MODE_START:
kvaser_usb_unlink_tx_urbs(priv);
+ leaf->joining_bus = true;
+
err = kvaser_usb_leaf_simple_cmd_async(priv, CMD_START_CHIP);
if (err)
return err;
--
2.37.3
next prev parent reply other threads:[~2022-09-01 12:29 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-01 12:27 [PATCH v3 00/15] can: kvaser_usb: Various fixes Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 01/15] can: kvaser_usb_leaf: Fix overread with an invalid command Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 02/15] can: kvaser_usb: Fix use of uninitialized completion Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 03/15] can: kvaser_usb: Fix possible completions during init_completion Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 04/15] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device Jimmy Assarsson
2022-09-02 11:40 ` Anssi Hannula
2022-09-03 18:21 ` Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 05/15] can: kvaser_usb: kvaser_usb_leaf: Rename {leaf,usbcan}_cmd_error_event to {leaf,usbcan}_cmd_can_error_event Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 06/15] can: kvaser_usb: kvaser_usb_leaf: Handle CMD_ERROR_EVENT Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 07/15] can: kvaser_usb_leaf: Set Warning state even without bus errors Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 08/15] can: kvaser_usb_leaf: Fix TX queue out of sync after restart Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 09/15] can: kvaser_usb_leaf: Fix CAN state " Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 10/15] can: kvaser_usb_leaf: Fix improved state not being reported Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 11/15] can: kvaser_usb_leaf: Fix wrong CAN state after stopping Jimmy Assarsson
2022-09-01 12:27 ` Jimmy Assarsson [this message]
2022-09-01 12:27 ` [PATCH v3 13/15] can: kvaser_usb_leaf: Fix bogus restart events Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 14/15] can: kvaser_usb: Add struct kvaser_usb_busparams Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 15/15] can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming Jimmy Assarsson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220901122729.271-13-extja@kvaser.com \
--to=extja@kvaser.com \
--cc=anssi.hannula@bitwise.fi \
--cc=jimmyassarsson@gmail.com \
--cc=linux-can@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox