From: Jimmy Assarsson <extja@kvaser.com>
To: linux-can@vger.kernel.org, Marc Kleine-Budde <mkl@pengutronix.de>,
Anssi Hannula <anssi.hannula@bitwise.fi>
Cc: Jimmy Assarsson <jimmyassarsson@gmail.com>,
stable@vger.kernel.org, Jimmy Assarsson <extja@kvaser.com>
Subject: [PATCH v3 08/15] can: kvaser_usb_leaf: Fix TX queue out of sync after restart
Date: Thu, 1 Sep 2022 14:27:22 +0200 [thread overview]
Message-ID: <20220901122729.271-9-extja@kvaser.com> (raw)
In-Reply-To: <20220901122729.271-1-extja@kvaser.com>
From: Anssi Hannula <anssi.hannula@bitwise.fi>
The TX queue seems to be implicitly flushed by the hardware during
bus-off or bus-off recovery, but the driver does not reset the TX
bookkeeping.
Despite not resetting TX bookkeeping the driver still re-enables TX
queue unconditionally, leading to "cannot find free context" /
NETDEV_TX_BUSY errors if the TX queue was full at bus-off time.
Fix that by resetting TX bookkeeping on CAN restart.
Tested with 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778.
Cc: stable@vger.kernel.org
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
---
Changes in v3:
- Rebased on 1d5eeda23f36 ("can: kvaser_usb: advertise timestamping capabilities and add ioctl support")
- Add stable to CC
- Add S-o-b
Changes in v2:
- Rebased on b3b6df2c56d8 ("can: kvaser_usb: kvaser_usb_leaf: fix bittiming limits")
- Removed explicit queue flush.
drivers/net/can/usb/kvaser_usb/kvaser_usb.h | 2 ++
drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c | 2 +-
drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 2 ++
3 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb.h b/drivers/net/can/usb/kvaser_usb/kvaser_usb.h
index 841da29cef93..f6c0938027ec 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb.h
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb.h
@@ -178,6 +178,8 @@ struct kvaser_usb_dev_cfg {
extern const struct kvaser_usb_dev_ops kvaser_usb_hydra_dev_ops;
extern const struct kvaser_usb_dev_ops kvaser_usb_leaf_dev_ops;
+void kvaser_usb_unlink_tx_urbs(struct kvaser_usb_net_priv *priv);
+
int kvaser_usb_recv_cmd(const struct kvaser_usb *dev, void *cmd, int len,
int *actual_len);
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
index c2bce6773adc..e91648ed7386 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
@@ -477,7 +477,7 @@ static void kvaser_usb_reset_tx_urb_contexts(struct kvaser_usb_net_priv *priv)
/* This method might sleep. Do not call it in the atomic context
* of URB completions.
*/
-static void kvaser_usb_unlink_tx_urbs(struct kvaser_usb_net_priv *priv)
+void kvaser_usb_unlink_tx_urbs(struct kvaser_usb_net_priv *priv)
{
usb_kill_anchored_urbs(&priv->tx_submitted);
kvaser_usb_reset_tx_urb_contexts(priv);
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
index b4acd9427967..48b8a0f0b362 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
@@ -1663,6 +1663,8 @@ static int kvaser_usb_leaf_set_mode(struct net_device *netdev,
switch (mode) {
case CAN_MODE_START:
+ kvaser_usb_unlink_tx_urbs(priv);
+
err = kvaser_usb_leaf_simple_cmd_async(priv, CMD_START_CHIP);
if (err)
return err;
--
2.37.3
next prev parent reply other threads:[~2022-09-01 12:29 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-01 12:27 [PATCH v3 00/15] can: kvaser_usb: Various fixes Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 01/15] can: kvaser_usb_leaf: Fix overread with an invalid command Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 02/15] can: kvaser_usb: Fix use of uninitialized completion Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 03/15] can: kvaser_usb: Fix possible completions during init_completion Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 04/15] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device Jimmy Assarsson
2022-09-02 11:40 ` Anssi Hannula
2022-09-03 18:21 ` Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 05/15] can: kvaser_usb: kvaser_usb_leaf: Rename {leaf,usbcan}_cmd_error_event to {leaf,usbcan}_cmd_can_error_event Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 06/15] can: kvaser_usb: kvaser_usb_leaf: Handle CMD_ERROR_EVENT Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 07/15] can: kvaser_usb_leaf: Set Warning state even without bus errors Jimmy Assarsson
2022-09-01 12:27 ` Jimmy Assarsson [this message]
2022-09-01 12:27 ` [PATCH v3 09/15] can: kvaser_usb_leaf: Fix CAN state after restart Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 10/15] can: kvaser_usb_leaf: Fix improved state not being reported Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 11/15] can: kvaser_usb_leaf: Fix wrong CAN state after stopping Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 12/15] can: kvaser_usb_leaf: Ignore stale bus-off after start Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 13/15] can: kvaser_usb_leaf: Fix bogus restart events Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 14/15] can: kvaser_usb: Add struct kvaser_usb_busparams Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 15/15] can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming Jimmy Assarsson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220901122729.271-9-extja@kvaser.com \
--to=extja@kvaser.com \
--cc=anssi.hannula@bitwise.fi \
--cc=jimmyassarsson@gmail.com \
--cc=linux-can@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox