[PATCH 4.14 00/61] 4.14.293-rc1 review

[PATCH 4.14 00/61] 4.14.293-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.14.293 release.
There are 61 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu, 15 Sep 2022 14:03:27 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.293-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.14.293-rc1

NeilBrown <neilb@suse.de>
    SUNRPC: use _bh spinlocking on ->transport_lock

Yang Ling <gnaygnil@gmail.com>
    MIPS: loongson32: ls1c: Fix hang during startup

Johan Hovold <johan@kernel.org>
    USB: serial: ch341: fix disabled rx timer on older devices

Johan Hovold <johan@kernel.org>
    USB: serial: ch341: fix lost character on LCR updates

Johan Hovold <johan+linaro@kernel.org>
    usb: dwc3: fix PHY disable sequence

Toke Høiland-Jørgensen <toke@toke.dk>
    sch_sfb: Also store skb len before calling child enqueue

Neal Cardwell <ncardwell@google.com>
    tcp: fix early ETIMEDOUT after spurious non-SACK RTO

David Lebrun <dlebrun@google.com>
    ipv6: sr: fix out-of-bounds read when setting HMAC data.

Dan Carpenter <dan.carpenter@oracle.com>
    tipc: fix shift wrapping bug in map_get()

Toke Høiland-Jørgensen <toke@toke.dk>
    sch_sfb: Don't assume the skb is still around after enqueueing to child

David Leadbeater <dgl@dgl.cx>
    netfilter: nf_conntrack_irc: Fix forged IP logic

Harsh Modi <harshmodi@google.com>
    netfilter: br_netfilter: Drop dst references before setting.

Isaac J. Manjarres <isaacmanjarres@google.com>
    driver core: Don't probe devices after bus_type.match() probe deferral

Sreekanth Reddy <sreekanth.reddy@broadcom.com>
    scsi: mpt3sas: Fix use-after-free warning

Christian A. Ehrhardt <lk@c--e.de>
    kprobes: Prohibit probes in gate area

Dongxiang Ke <kdx.glider@gmail.com>
    ALSA: usb-audio: Fix an out-of-bounds bug in __snd_usb_parse_audio_interface()

Pattara Teerapong <pteerapong@chromium.org>
    ALSA: aloop: Fix random zeros in capture data when using jiffies timer

Tasos Sahanidis <tasos@tasossah.com>
    ALSA: emu10k1: Fix out of bounds access in snd_emu10k1_pcm_channel_alloc()

Yang Yingliang <yangyingliang@huawei.com>
    fbdev: chipsfb: Add missing pci_disable_device() in chipsfb_pci_init()

Mark Brown <broonie@kernel.org>
    arm64/signal: Raise limit on stack frames

Helge Deller <deller@gmx.de>
    parisc: Add runtime check to prevent PA2.0 kernels on PA1.x machines

Li Qiong <liqiong@nfschina.com>
    parisc: ccio-dma: Handle kmalloc failure in ccio_init_resources()

Zhenneng Li <lizhenneng@kylinos.cn>
    drm/radeon: add a force flush to delay work when radeon

Candice Li <candice.li@amd.com>
    drm/amdgpu: Check num_gfx_rings for gfx v9_0 rb setup.

Yee Lee <yee.lee@mediatek.com>
    Revert "mm: kmemleak: take a full lowmem check in kmemleak_*_phys()"

Linus Torvalds <torvalds@linux-foundation.org>
    fs: only do a memory barrier for the first set_buffer_uptodate()

Stanislaw Gruszka <stf_xl@wp.pl>
    wifi: iwlegacy: 4965: corrected fix for potential off-by-one overflow in il4965_rs_fill_link_cmd()

Hyunwoo Kim <imv4bel@gmail.com>
    efi: capsule-loader: Fix use-after-free in efi_capsule_write

Takashi Iwai <tiwai@suse.de>
    ALSA: seq: Fix data-race at module auto-loading

Takashi Iwai <tiwai@suse.de>
    ALSA: seq: oss: Fix data-race for max_midi_devs access

Miquel Raynal <miquel.raynal@bootlin.com>
    net: mac802154: Fix a condition in the receive path

Siddh Raman Pant <code@siddh.me>
    wifi: mac80211: Don't finalize CSA in IBSS mode if state is disconnected

Krishna Kurapati <quic_kriskura@quicinc.com>
    usb: gadget: mass_storage: Fix cdrom data transfers on MAC-OS

Alan Stern <stern@rowland.harvard.edu>
    USB: core: Prevent nested device-reset calls

Josh Poimboeuf <jpoimboe@kernel.org>
    s390: fix nospec table alignments

Gerald Schaefer <gerald.schaefer@linux.ibm.com>
    s390/hugetlb: fix prepare_hugepage_range() check for 2 GB hugepages

Witold Lipieta <witold.lipieta@thaumatec.com>
    usb-storage: Add ignore-residue quirk for NXP PN7462AU

Thierry GUIBERT <thierry.guibert@croix-rouge.fr>
    USB: cdc-acm: Add Icom PMR F3400 support (0c26:0020)

Heiner Kallweit <hkallweit1@gmail.com>
    usb: dwc2: fix wrong order of phy_power_on and phy_init

Slark Xiao <slark_xiao@163.com>
    USB: serial: option: add support for Cinterion MV32-WA/WB RmNet mode

Yonglin Tan <yonglin.tan@outlook.com>
    USB: serial: option: add Quectel EM060K modem

Yan Xinyu <sdlyyxy@bupt.edu.cn>
    USB: serial: option: add support for OPPO R11 diag port

Johan Hovold <johan@kernel.org>
    USB: serial: cp210x: add Decagon UCA device id

Mathias Nyman <mathias.nyman@linux.intel.com>
    xhci: Add grace period after xHC start to prevent premature runtime suspend.

Mika Westerberg <mika.westerberg@linux.intel.com>
    thunderbolt: Use the actual buffer in tb_async_error()

Armin Wolf <W_Armin@gmx.de>
    hwmon: (gpio-fan) Fix array out of bounds access

Peter Robinson <pbrobinson@gmail.com>
    Input: rk805-pwrkey - fix module autoloading

Colin Ian King <colin.i.king@gmail.com>
    drm/i915/reg: Fix spelling mistake "Unsupport" -> "Unsupported"

Carlos Llamas <cmllamas@google.com>
    binder: fix UAF of ref->proc caused by race condition

Niek Nooijens <niek.nooijens@omron.com>
    USB: serial: ftdi_sio: add Omron CS1W-CIF31 device id

Helge Deller <deller@gmx.de>
    vt: Clear selection before changing the font

Dan Carpenter <dan.carpenter@oracle.com>
    staging: rtl8712: fix use after free bugs

Shenwei Wang <shenwei.wang@nxp.com>
    serial: fsl_lpuart: RS485 RTS polariy is inverse

Cong Wang <cong.wang@bytedance.com>
    kcm: fix strp_init() order and cleanup

Duoming Zhou <duoming@zju.edu.cn>
    ethernet: rocker: fix sleep in atomic context bug in neigh_timer_handler

Dan Carpenter <dan.carpenter@oracle.com>
    wifi: cfg80211: debugfs: fix return type in ht40allow_map_read()

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    platform/x86: pmc_atom: Fix SLP_TYPx bitfield mask

Douglas Anderson <dianders@chromium.org>
    drm/msm/dsi: Fix number of regulators for msm8996_dsi_cfg

Maxim Mikityanskiy <maximmi@nvidia.com>
    bpf: Fix the off-by-two error in range markings

Stanislav Fomichev <sdf@google.com>
    selftests/bpf: Fix test_align verifier log patterns

John Fastabend <john.fastabend@gmail.com>
    bpf: Verifer, adjust_scalar_min_max_vals to always call update_reg_bounds()


-------------

Diffstat:

 Makefile                                      |  4 +--
 arch/arm64/kernel/signal.c                    |  2 +-
 arch/mips/loongson32/ls1c/board.c             |  1 -
 arch/parisc/kernel/head.S                     | 43 ++++++++++++++++++++++++++-
 arch/s390/include/asm/hugetlb.h               |  6 ++--
 arch/s390/kernel/vmlinux.lds.S                |  1 +
 drivers/android/binder.c                      | 12 ++++++++
 drivers/base/dd.c                             | 10 +++++++
 drivers/firmware/efi/capsule-loader.c         | 31 +++++--------------
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c         |  3 +-
 drivers/gpu/drm/i915/gvt/handlers.c           |  2 +-
 drivers/gpu/drm/msm/dsi/dsi_cfg.c             |  2 +-
 drivers/gpu/drm/radeon/radeon_device.c        |  3 ++
 drivers/hwmon/gpio-fan.c                      |  3 ++
 drivers/input/misc/rk805-pwrkey.c             |  1 +
 drivers/net/ethernet/rocker/rocker_ofdpa.c    |  2 +-
 drivers/net/wireless/intel/iwlegacy/4965-rs.c |  5 +---
 drivers/parisc/ccio-dma.c                     | 11 +++++--
 drivers/platform/x86/pmc_atom.c               |  2 +-
 drivers/scsi/mpt3sas/mpt3sas_scsih.c          |  2 +-
 drivers/staging/rtl8712/rtl8712_cmd.c         | 36 ----------------------
 drivers/thunderbolt/ctl.c                     |  2 +-
 drivers/tty/serial/fsl_lpuart.c               |  4 +--
 drivers/tty/vt/vt.c                           | 12 +++++---
 drivers/usb/class/cdc-acm.c                   |  3 ++
 drivers/usb/core/hub.c                        | 10 +++++++
 drivers/usb/dwc2/platform.c                   |  8 ++---
 drivers/usb/dwc3/core.c                       | 20 ++++++-------
 drivers/usb/gadget/function/storage_common.c  |  6 ++--
 drivers/usb/host/xhci-hub.c                   | 11 +++++++
 drivers/usb/host/xhci.c                       |  4 ++-
 drivers/usb/host/xhci.h                       |  2 +-
 drivers/usb/serial/ch341.c                    | 15 ++++++++--
 drivers/usb/serial/cp210x.c                   |  1 +
 drivers/usb/serial/ftdi_sio.c                 |  2 ++
 drivers/usb/serial/ftdi_sio_ids.h             |  6 ++++
 drivers/usb/serial/option.c                   | 15 ++++++++++
 drivers/usb/storage/unusual_devs.h            |  7 +++++
 drivers/video/fbdev/chipsfb.c                 |  1 +
 include/linux/buffer_head.h                   | 11 +++++++
 include/linux/platform_data/x86/pmc_atom.h    |  6 ++--
 include/linux/usb.h                           |  2 ++
 kernel/bpf/verifier.c                         |  1 +
 kernel/kprobes.c                              |  1 +
 mm/kmemleak.c                                 |  8 ++---
 net/bridge/br_netfilter_hooks.c               |  2 ++
 net/bridge/br_netfilter_ipv6.c                |  1 +
 net/ipv4/tcp_input.c                          | 25 +++++++++++-----
 net/ipv6/seg6.c                               |  5 ++++
 net/kcm/kcmsock.c                             | 15 +++++-----
 net/mac80211/ibss.c                           |  4 +++
 net/mac802154/rx.c                            |  2 +-
 net/netfilter/nf_conntrack_irc.c              |  5 ++--
 net/sched/sch_sfb.c                           | 13 ++++----
 net/sunrpc/xprt.c                             |  4 +--
 net/tipc/monitor.c                            |  2 +-
 net/wireless/debugfs.c                        |  3 +-
 sound/core/seq/oss/seq_oss_midi.c             |  2 ++
 sound/core/seq/seq_clientmgr.c                | 12 ++++----
 sound/drivers/aloop.c                         |  7 +++--
 sound/pci/emu10k1/emupcm.c                    |  2 +-
 sound/usb/stream.c                            |  2 +-
 tools/testing/selftests/bpf/test_align.c      | 27 +++++++++--------
 tools/testing/selftests/bpf/test_verifier.c   | 16 +++++-----
 64 files changed, 316 insertions(+), 173 deletions(-)

[PATCH 4.14 01/61] bpf: Verifer, adjust_scalar_min_max_vals to always call update_reg_bounds()

[Greg Kroah-Hartman]

From: John Fastabend <john.fastabend@gmail.com>

commit 294f2fc6da27620a506e6c050241655459ccd6bd upstream.

Currently, for all op verification we call __red_deduce_bounds() and
__red_bound_offset() but we only call __update_reg_bounds() in bitwise
ops. However, we could benefit from calling __update_reg_bounds() in
BPF_ADD, BPF_SUB, and BPF_MUL cases as well.

For example, a register with state 'R1_w=invP0' when we subtract from
it,

 w1 -= 2

Before coerce we will now have an smin_value=S64_MIN, smax_value=U64_MAX
and unsigned bounds umin_value=0, umax_value=U64_MAX. These will then
be clamped to S32_MIN, U32_MAX values by coerce in the case of alu32 op
as done in above example. However tnum will be a constant because the
ALU op is done on a constant.

Without update_reg_bounds() we have a scenario where tnum is a const
but our unsigned bounds do not reflect this. By calling update_reg_bounds
after coerce to 32bit we further refine the umin_value to U64_MAX in the
alu64 case or U32_MAX in the alu32 case above.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158507151689.15666.566796274289413203.stgit@john-Precision-5820-Tower
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/bpf/verifier.c |    1 +
 1 file changed, 1 insertion(+)

--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -2739,6 +2739,7 @@ static int adjust_scalar_min_max_vals(st
 		coerce_reg_to_size(dst_reg, 4);
 	}
 
+	__update_reg_bounds(dst_reg);
 	__reg_deduce_bounds(dst_reg);
 	__reg_bound_offset(dst_reg);
 	return 0;

[PATCH 4.14 02/61] selftests/bpf: Fix test_align verifier log patterns

[Greg Kroah-Hartman]

From: Stanislav Fomichev <sdf@google.com>

commit 5366d2269139ba8eb6a906d73a0819947e3e4e0a upstream.

Commit 294f2fc6da27 ("bpf: Verifer, adjust_scalar_min_max_vals to always
call update_reg_bounds()") changed the way verifier logs some of its state,
adjust the test_align accordingly. Where possible, I tried to not copy-paste
the entire log line and resorted to dropping the last closing brace instead.

Fixes: 294f2fc6da27 ("bpf: Verifer, adjust_scalar_min_max_vals to always call update_reg_bounds()")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200515194904.229296-1-sdf@google.com
[OP: adjust for 4.14 selftests, apply only the relevant diffs]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/bpf/test_align.c |   27 ++++++++++++++-------------
 1 file changed, 14 insertions(+), 13 deletions(-)

--- a/tools/testing/selftests/bpf/test_align.c
+++ b/tools/testing/selftests/bpf/test_align.c
@@ -363,15 +363,15 @@ static struct bpf_align_test tests[] = {
 			 * is still (4n), fixed offset is not changed.
 			 * Also, we create a new reg->id.
 			 */
-			{29, "R5=pkt(id=4,off=18,r=0,umax_value=2040,var_off=(0x0; 0x7fc))"},
+			{29, "R5=pkt(id=4,off=18,r=0,umax_value=2040,var_off=(0x0; 0x7fc)"},
 			/* At the time the word size load is performed from R5,
 			 * its total fixed offset is NET_IP_ALIGN + reg->off (18)
 			 * which is 20.  Then the variable offset is (4n), so
 			 * the total offset is 4-byte aligned and meets the
 			 * load's requirements.
 			 */
-			{33, "R4=pkt(id=4,off=22,r=22,umax_value=2040,var_off=(0x0; 0x7fc))"},
-			{33, "R5=pkt(id=4,off=18,r=22,umax_value=2040,var_off=(0x0; 0x7fc))"},
+			{33, "R4=pkt(id=4,off=22,r=22,umax_value=2040,var_off=(0x0; 0x7fc)"},
+			{33, "R5=pkt(id=4,off=18,r=22,umax_value=2040,var_off=(0x0; 0x7fc)"},
 		},
 	},
 	{
@@ -414,15 +414,15 @@ static struct bpf_align_test tests[] = {
 			/* Adding 14 makes R6 be (4n+2) */
 			{9, "R6=inv(id=0,umin_value=14,umax_value=1034,var_off=(0x2; 0x7fc))"},
 			/* Packet pointer has (4n+2) offset */
-			{11, "R5=pkt(id=1,off=0,r=0,umin_value=14,umax_value=1034,var_off=(0x2; 0x7fc))"},
-			{13, "R4=pkt(id=1,off=4,r=0,umin_value=14,umax_value=1034,var_off=(0x2; 0x7fc))"},
+			{11, "R5=pkt(id=1,off=0,r=0,umin_value=14,umax_value=1034,var_off=(0x2; 0x7fc)"},
+			{13, "R4=pkt(id=1,off=4,r=0,umin_value=14,umax_value=1034,var_off=(0x2; 0x7fc)"},
 			/* At the time the word size load is performed from R5,
 			 * its total fixed offset is NET_IP_ALIGN + reg->off (0)
 			 * which is 2.  Then the variable offset is (4n+2), so
 			 * the total offset is 4-byte aligned and meets the
 			 * load's requirements.
 			 */
-			{15, "R5=pkt(id=1,off=0,r=4,umin_value=14,umax_value=1034,var_off=(0x2; 0x7fc))"},
+			{15, "R5=pkt(id=1,off=0,r=4,umin_value=14,umax_value=1034,var_off=(0x2; 0x7fc)"},
 			/* Newly read value in R6 was shifted left by 2, so has
 			 * known alignment of 4.
 			 */
@@ -430,15 +430,15 @@ static struct bpf_align_test tests[] = {
 			/* Added (4n) to packet pointer's (4n+2) var_off, giving
 			 * another (4n+2).
 			 */
-			{19, "R5=pkt(id=2,off=0,r=0,umin_value=14,umax_value=2054,var_off=(0x2; 0xffc))"},
-			{21, "R4=pkt(id=2,off=4,r=0,umin_value=14,umax_value=2054,var_off=(0x2; 0xffc))"},
+			{19, "R5=pkt(id=2,off=0,r=0,umin_value=14,umax_value=2054,var_off=(0x2; 0xffc)"},
+			{21, "R4=pkt(id=2,off=4,r=0,umin_value=14,umax_value=2054,var_off=(0x2; 0xffc)"},
 			/* At the time the word size load is performed from R5,
 			 * its total fixed offset is NET_IP_ALIGN + reg->off (0)
 			 * which is 2.  Then the variable offset is (4n+2), so
 			 * the total offset is 4-byte aligned and meets the
 			 * load's requirements.
 			 */
-			{23, "R5=pkt(id=2,off=0,r=4,umin_value=14,umax_value=2054,var_off=(0x2; 0xffc))"},
+			{23, "R5=pkt(id=2,off=0,r=4,umin_value=14,umax_value=2054,var_off=(0x2; 0xffc)"},
 		},
 	},
 	{
@@ -473,11 +473,11 @@ static struct bpf_align_test tests[] = {
 		.matches = {
 			{4, "R5=pkt_end(id=0,off=0,imm=0)"},
 			/* (ptr - ptr) << 2 == unknown, (4n) */
-			{6, "R5=inv(id=0,smax_value=9223372036854775804,umax_value=18446744073709551612,var_off=(0x0; 0xfffffffffffffffc))"},
+			{6, "R5=inv(id=0,smax_value=9223372036854775804,umax_value=18446744073709551612,var_off=(0x0; 0xfffffffffffffffc)"},
 			/* (4n) + 14 == (4n+2).  We blow our bounds, because
 			 * the add could overflow.
 			 */
-			{7, "R5=inv(id=0,var_off=(0x2; 0xfffffffffffffffc))"},
+			{7, "R5=inv(id=0,smin_value=-9223372036854775806,smax_value=9223372036854775806,umin_value=2,umax_value=18446744073709551614,var_off=(0x2; 0xfffffffffffffffc)"},
 			/* Checked s>=0 */
 			{9, "R5=inv(id=0,umin_value=2,umax_value=9223372036854775806,var_off=(0x2; 0x7ffffffffffffffc))"},
 			/* packet pointer + nonnegative (4n+2) */
@@ -532,7 +532,7 @@ static struct bpf_align_test tests[] = {
 			/* New unknown value in R7 is (4n) */
 			{11, "R7=inv(id=0,umax_value=1020,var_off=(0x0; 0x3fc))"},
 			/* Subtracting it from R6 blows our unsigned bounds */
-			{12, "R6=inv(id=0,smin_value=-1006,smax_value=1034,var_off=(0x2; 0xfffffffffffffffc))"},
+			{12, "R6=inv(id=0,smin_value=-1006,smax_value=1034,umin_value=2,umax_value=18446744073709551614,var_off=(0x2; 0xfffffffffffffffc)"},
 			/* Checked s>= 0 */
 			{14, "R6=inv(id=0,umin_value=2,umax_value=1034,var_off=(0x2; 0x7fc))"},
 			/* At the time the word size load is performed from R5,
@@ -541,7 +541,8 @@ static struct bpf_align_test tests[] = {
 			 * the total offset is 4-byte aligned and meets the
 			 * load's requirements.
 			 */
-			{20, "R5=pkt(id=1,off=0,r=4,umin_value=2,umax_value=1034,var_off=(0x2; 0x7fc))"},
+			{20, "R5=pkt(id=1,off=0,r=4,umin_value=2,umax_value=1034,var_off=(0x2; 0x7fc)"},
+
 		},
 	},
 	{

[PATCH 4.14 03/61] bpf: Fix the off-by-two error in range markings

[Greg Kroah-Hartman]

From: Maxim Mikityanskiy <maximmi@nvidia.com>

commit 2fa7d94afc1afbb4d702760c058dc2d7ed30f226 upstream.

The first commit cited below attempts to fix the off-by-one error that
appeared in some comparisons with an open range. Due to this error,
arithmetically equivalent pieces of code could get different verdicts
from the verifier, for example (pseudocode):

  // 1. Passes the verifier:
  if (data + 8 > data_end)
      return early
  read *(u64 *)data, i.e. [data; data+7]

  // 2. Rejected by the verifier (should still pass):
  if (data + 7 >= data_end)
      return early
  read *(u64 *)data, i.e. [data; data+7]

The attempted fix, however, shifts the range by one in a wrong
direction, so the bug not only remains, but also such piece of code
starts failing in the verifier:

  // 3. Rejected by the verifier, but the check is stricter than in #1.
  if (data + 8 >= data_end)
      return early
  read *(u64 *)data, i.e. [data; data+7]

The change performed by that fix converted an off-by-one bug into
off-by-two. The second commit cited below added the BPF selftests
written to ensure than code chunks like #3 are rejected, however,
they should be accepted.

This commit fixes the off-by-two error by adjusting new_range in the
right direction and fixes the tests by changing the range into the
one that should actually fail.

Fixes: fb2a311a31d3 ("bpf: fix off by one for range markings with L{T, E} patterns")
Fixes: b37242c773b2 ("bpf: add test cases to bpf selftests to cover all access tests")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211130181607.593149-1-maximmi@nvidia.com
[OP: only cherry-pick selftest changes applicable to 4.14]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/bpf/test_verifier.c |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -7438,10 +7438,10 @@ static struct bpf_test tests[] = {
 			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
 				    offsetof(struct xdp_md, data_end)),
 			BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
-			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 6),
 			BPF_JMP_REG(BPF_JGT, BPF_REG_3, BPF_REG_1, 1),
 			BPF_JMP_IMM(BPF_JA, 0, 0, 1),
-			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -6),
 			BPF_MOV64_IMM(BPF_REG_0, 0),
 			BPF_EXIT_INSN(),
 		},
@@ -7494,10 +7494,10 @@ static struct bpf_test tests[] = {
 			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
 				    offsetof(struct xdp_md, data_end)),
 			BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
-			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 6),
 			BPF_JMP_REG(BPF_JLT, BPF_REG_1, BPF_REG_3, 1),
 			BPF_JMP_IMM(BPF_JA, 0, 0, 1),
-			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -6),
 			BPF_MOV64_IMM(BPF_REG_0, 0),
 			BPF_EXIT_INSN(),
 		},
@@ -7603,9 +7603,9 @@ static struct bpf_test tests[] = {
 			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
 				    offsetof(struct xdp_md, data_end)),
 			BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
-			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 6),
 			BPF_JMP_REG(BPF_JGE, BPF_REG_1, BPF_REG_3, 1),
-			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -6),
 			BPF_MOV64_IMM(BPF_REG_0, 0),
 			BPF_EXIT_INSN(),
 		},
@@ -7770,9 +7770,9 @@ static struct bpf_test tests[] = {
 			BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
 				    offsetof(struct xdp_md, data_end)),
 			BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
-			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 6),
 			BPF_JMP_REG(BPF_JLE, BPF_REG_3, BPF_REG_1, 1),
-			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -6),
 			BPF_MOV64_IMM(BPF_REG_0, 0),
 			BPF_EXIT_INSN(),
 		},

[PATCH 4.14 04/61] drm/msm/dsi: Fix number of regulators for msm8996_dsi_cfg

[Greg Kroah-Hartman]

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit 1e00d6ac8a3422765bae37aeac2002dfd3c0bda6 ]

3 regulators are listed but the number 2 is specified. Fix it.

Fixes: 3a3ff88a0fc1 ("drm/msm/dsi: Add 8x96 info in dsi_cfg")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/496318/
Link: https://lore.kernel.org/r/20220804073608.v4.1.I1056ee3f77f71287f333279efe4c85f88d403f65@changeid
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/dsi/dsi_cfg.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.c b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
index a5d75c9b3a737..2b8c39a1f7484 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
@@ -105,7 +105,7 @@ static const char * const dsi_8996_bus_clk_names[] = {
 static const struct msm_dsi_config msm8996_dsi_cfg = {
 	.io_offset = DSI_6G_REG_SHIFT,
 	.reg_cfg = {
-		.num = 2,
+		.num = 3,
 		.regs = {
 			{"vdda", 18160, 1 },	/* 1.25 V */
 			{"vcca", 17000, 32 },	/* 0.925 V */
-- 
2.35.1

[PATCH 4.14 05/61] platform/x86: pmc_atom: Fix SLP_TYPx bitfield mask

[Greg Kroah-Hartman]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 0a90ed8d0cfa29735a221eba14d9cb6c735d35b6 ]

On Intel hardware the SLP_TYPx bitfield occupies bits 10-12 as per ACPI
specification (see Table 4.13 "PM1 Control Registers Fixed Hardware
Feature Control Bits" for the details).

Fix the mask and other related definitions accordingly.

Fixes: 93e5eadd1f6e ("x86/platform: New Intel Atom SOC power management controller driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220801113734.36131-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/pmc_atom.c            | 2 +-
 include/linux/platform_data/x86/pmc_atom.h | 6 ++++--
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/platform/x86/pmc_atom.c b/drivers/platform/x86/pmc_atom.c
index d1d5ec3c0f141..d1f10354c3550 100644
--- a/drivers/platform/x86/pmc_atom.c
+++ b/drivers/platform/x86/pmc_atom.c
@@ -253,7 +253,7 @@ static void pmc_power_off(void)
 	pm1_cnt_port = acpi_base_addr + PM1_CNT;
 
 	pm1_cnt_value = inl(pm1_cnt_port);
-	pm1_cnt_value &= SLEEP_TYPE_MASK;
+	pm1_cnt_value &= ~SLEEP_TYPE_MASK;
 	pm1_cnt_value |= SLEEP_TYPE_S5;
 	pm1_cnt_value |= SLEEP_ENABLE;
 
diff --git a/include/linux/platform_data/x86/pmc_atom.h b/include/linux/platform_data/x86/pmc_atom.h
index e4905fe69c381..e4cfcb6f16633 100644
--- a/include/linux/platform_data/x86/pmc_atom.h
+++ b/include/linux/platform_data/x86/pmc_atom.h
@@ -16,6 +16,8 @@
 #ifndef PMC_ATOM_H
 #define PMC_ATOM_H
 
+#include <linux/bits.h>
+
 /* ValleyView Power Control Unit PCI Device ID */
 #define	PCI_DEVICE_ID_VLV_PMC	0x0F1C
 /* CherryTrail Power Control Unit PCI Device ID */
@@ -148,9 +150,9 @@
 #define	ACPI_MMIO_REG_LEN	0x100
 
 #define	PM1_CNT			0x4
-#define	SLEEP_TYPE_MASK		0xFFFFECFF
+#define	SLEEP_TYPE_MASK		GENMASK(12, 10)
 #define	SLEEP_TYPE_S5		0x1C00
-#define	SLEEP_ENABLE		0x2000
+#define	SLEEP_ENABLE		BIT(13)
 
 extern int pmc_atom_read(int offset, u32 *value);
 extern int pmc_atom_write(int offset, u32 value);
-- 
2.35.1

[PATCH 4.14 06/61] wifi: cfg80211: debugfs: fix return type in ht40allow_map_read()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit d776763f48084926b5d9e25507a3ddb7c9243d5e ]

The return type is supposed to be ssize_t, which is signed long,
but "r" was declared as unsigned int.  This means that on 64 bit systems
we return positive values instead of negative error codes.

Fixes: 80a3511d70e8 ("cfg80211: add debugfs HT40 allow map")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YutvOQeJm0UjLhwU@kili
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/debugfs.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/wireless/debugfs.c b/net/wireless/debugfs.c
index 30fc6eb352bcc..e6410487e25da 100644
--- a/net/wireless/debugfs.c
+++ b/net/wireless/debugfs.c
@@ -68,9 +68,10 @@ static ssize_t ht40allow_map_read(struct file *file,
 {
 	struct wiphy *wiphy = file->private_data;
 	char *buf;
-	unsigned int offset = 0, buf_size = PAGE_SIZE, i, r;
+	unsigned int offset = 0, buf_size = PAGE_SIZE, i;
 	enum nl80211_band band;
 	struct ieee80211_supported_band *sband;
+	ssize_t r;
 
 	buf = kzalloc(buf_size, GFP_KERNEL);
 	if (!buf)
-- 
2.35.1

[PATCH 4.14 07/61] ethernet: rocker: fix sleep in atomic context bug in neigh_timer_handler

[Greg Kroah-Hartman]

From: Duoming Zhou <duoming@zju.edu.cn>

[ Upstream commit c0955bf957be4bead01fae1d791476260da7325d ]

The function neigh_timer_handler() is a timer handler that runs in an
atomic context. When used by rocker, neigh_timer_handler() calls
"kzalloc(.., GFP_KERNEL)" that may sleep. As a result, the sleep in
atomic context bug will happen. One of the processes is shown below:

ofdpa_fib4_add()
 ...
 neigh_add_timer()

(wait a timer)

neigh_timer_handler()
 neigh_release()
  neigh_destroy()
   rocker_port_neigh_destroy()
    rocker_world_port_neigh_destroy()
     ofdpa_port_neigh_destroy()
      ofdpa_port_ipv4_neigh()
       kzalloc(sizeof(.., GFP_KERNEL) //may sleep

This patch changes the gfp_t parameter of kzalloc() from GFP_KERNEL to
GFP_ATOMIC in order to mitigate the bug.

Fixes: 00fc0c51e35b ("rocker: Change world_ops API and implementation to be switchdev independant")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/rocker/rocker_ofdpa.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/rocker/rocker_ofdpa.c b/drivers/net/ethernet/rocker/rocker_ofdpa.c
index 0653b70723a34..5dad40257e12e 100644
--- a/drivers/net/ethernet/rocker/rocker_ofdpa.c
+++ b/drivers/net/ethernet/rocker/rocker_ofdpa.c
@@ -1277,7 +1277,7 @@ static int ofdpa_port_ipv4_neigh(struct ofdpa_port *ofdpa_port,
 	bool removing;
 	int err = 0;
 
-	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+	entry = kzalloc(sizeof(*entry), GFP_ATOMIC);
 	if (!entry)
 		return -ENOMEM;
 
-- 
2.35.1

[PATCH 4.14 08/61] kcm: fix strp_init() order and cleanup

[Greg Kroah-Hartman]

From: Cong Wang <cong.wang@bytedance.com>

[ Upstream commit 8fc29ff3910f3af08a7c40a75d436b5720efe2bf ]

strp_init() is called just a few lines above this csk->sk_user_data
check, it also initializes strp->work etc., therefore, it is
unnecessary to call strp_done() to cancel the freshly initialized
work.

And if sk_user_data is already used by KCM, psock->strp should not be
touched, particularly strp->work state, so we need to move strp_init()
after the csk->sk_user_data check.

This also makes a lockdep warning reported by syzbot go away.

Reported-and-tested-by: syzbot+9fc084a4348493ef65d2@syzkaller.appspotmail.com
Reported-by: syzbot+e696806ef96cdd2d87cd@syzkaller.appspotmail.com
Fixes: e5571240236c ("kcm: Check if sk_user_data already set in kcm_attach")
Fixes: dff8baa26117 ("kcm: Call strp_stop before strp_done in kcm_attach")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20220827181314.193710-1-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/kcm/kcmsock.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/net/kcm/kcmsock.c b/net/kcm/kcmsock.c
index 7b4f3f8658617..c364d849e7c3d 100644
--- a/net/kcm/kcmsock.c
+++ b/net/kcm/kcmsock.c
@@ -1412,12 +1412,6 @@ static int kcm_attach(struct socket *sock, struct socket *csock,
 	psock->sk = csk;
 	psock->bpf_prog = prog;
 
-	err = strp_init(&psock->strp, csk, &cb);
-	if (err) {
-		kmem_cache_free(kcm_psockp, psock);
-		goto out;
-	}
-
 	write_lock_bh(&csk->sk_callback_lock);
 
 	/* Check if sk_user_data is aready by KCM or someone else.
@@ -1425,13 +1419,18 @@ static int kcm_attach(struct socket *sock, struct socket *csock,
 	 */
 	if (csk->sk_user_data) {
 		write_unlock_bh(&csk->sk_callback_lock);
-		strp_stop(&psock->strp);
-		strp_done(&psock->strp);
 		kmem_cache_free(kcm_psockp, psock);
 		err = -EALREADY;
 		goto out;
 	}
 
+	err = strp_init(&psock->strp, csk, &cb);
+	if (err) {
+		write_unlock_bh(&csk->sk_callback_lock);
+		kmem_cache_free(kcm_psockp, psock);
+		goto out;
+	}
+
 	psock->save_data_ready = csk->sk_data_ready;
 	psock->save_write_space = csk->sk_write_space;
 	psock->save_state_change = csk->sk_state_change;
-- 
2.35.1

[PATCH 4.14 09/61] serial: fsl_lpuart: RS485 RTS polariy is inverse

[Greg Kroah-Hartman]

From: Shenwei Wang <shenwei.wang@nxp.com>

commit 846651eca073e2e02e37490a4a52752415d84781 upstream.

The setting of RS485 RTS polarity is inverse in the current driver.

When the property of 'rs485-rts-active-low' is enabled in the dts node,
the RTS signal should be LOW during sending. Otherwise, if there is no
such a property, the RTS should be HIGH during sending.

Fixes: 03895cf41d18 ("tty: serial: fsl_lpuart: Add support for RS-485")
Cc: stable <stable@kernel.org>
Signed-off-by: Nicolas Diaz <nicolas.diaz@nxp.com>
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://lore.kernel.org/r/20220805144529.604856-1-shenwei.wang@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/fsl_lpuart.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1106,9 +1106,9 @@ static int lpuart_config_rs485(struct ua
 		 * Note: UART is assumed to be active high.
 		 */
 		if (rs485->flags & SER_RS485_RTS_ON_SEND)
-			modem &= ~UARTMODEM_TXRTSPOL;
-		else if (rs485->flags & SER_RS485_RTS_AFTER_SEND)
 			modem |= UARTMODEM_TXRTSPOL;
+		else if (rs485->flags & SER_RS485_RTS_AFTER_SEND)
+			modem &= ~UARTMODEM_TXRTSPOL;
 	}
 
 	/* Store the new configuration */

[PATCH 4.14 10/61] staging: rtl8712: fix use after free bugs

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit e230a4455ac3e9b112f0367d1b8e255e141afae0 upstream.

_Read/Write_MACREG callbacks are NULL so the read/write_macreg_hdl()
functions don't do anything except free the "pcmd" pointer.  It
results in a use after free.  Delete them.

Fixes: 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel")
Cc: stable <stable@kernel.org>
Reported-by: Zheng Wang <hackerzheng666@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/Yw4ASqkYcUhUfoY2@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/rtl8712/rtl8712_cmd.c |   36 ----------------------------------
 1 file changed, 36 deletions(-)

--- a/drivers/staging/rtl8712/rtl8712_cmd.c
+++ b/drivers/staging/rtl8712/rtl8712_cmd.c
@@ -129,34 +129,6 @@ static void r871x_internal_cmd_hdl(struc
 	kfree(pdrvcmd->pbuf);
 }
 
-static u8 read_macreg_hdl(struct _adapter *padapter, u8 *pbuf)
-{
-	void (*pcmd_callback)(struct _adapter *dev, struct cmd_obj	*pcmd);
-	struct cmd_obj *pcmd  = (struct cmd_obj *)pbuf;
-
-	/*  invoke cmd->callback function */
-	pcmd_callback = cmd_callback[pcmd->cmdcode].callback;
-	if (!pcmd_callback)
-		r8712_free_cmd_obj(pcmd);
-	else
-		pcmd_callback(padapter, pcmd);
-	return H2C_SUCCESS;
-}
-
-static u8 write_macreg_hdl(struct _adapter *padapter, u8 *pbuf)
-{
-	void (*pcmd_callback)(struct _adapter *dev, struct cmd_obj	*pcmd);
-	struct cmd_obj *pcmd  = (struct cmd_obj *)pbuf;
-
-	/*  invoke cmd->callback function */
-	pcmd_callback = cmd_callback[pcmd->cmdcode].callback;
-	if (!pcmd_callback)
-		r8712_free_cmd_obj(pcmd);
-	else
-		pcmd_callback(padapter, pcmd);
-	return H2C_SUCCESS;
-}
-
 static u8 read_bbreg_hdl(struct _adapter *padapter, u8 *pbuf)
 {
 	struct cmd_obj *pcmd  = (struct cmd_obj *)pbuf;
@@ -225,14 +197,6 @@ static struct cmd_obj *cmd_hdl_filter(st
 	pcmd_r = NULL;
 
 	switch (pcmd->cmdcode) {
-	case GEN_CMD_CODE(_Read_MACREG):
-		read_macreg_hdl(padapter, (u8 *)pcmd);
-		pcmd_r = pcmd;
-		break;
-	case GEN_CMD_CODE(_Write_MACREG):
-		write_macreg_hdl(padapter, (u8 *)pcmd);
-		pcmd_r = pcmd;
-		break;
 	case GEN_CMD_CODE(_Read_BBREG):
 		read_bbreg_hdl(padapter, (u8 *)pcmd);
 		break;

[PATCH 4.14 11/61] vt: Clear selection before changing the font

[Greg Kroah-Hartman]

From: Helge Deller <deller@gmx.de>

commit 566f9c9f89337792070b5a6062dff448b3e7977f upstream.

When changing the console font with ioctl(KDFONTOP) the new font size
can be bigger than the previous font. A previous selection may thus now
be outside of the new screen size and thus trigger out-of-bounds
accesses to graphics memory if the selection is removed in
vc_do_resize().

Prevent such out-of-memory accesses by dropping the selection before the
various con_font_set() console handlers are called.

Reported-by: syzbot+14b0e8f3fd1612e35350@syzkaller.appspotmail.com
Cc: stable <stable@kernel.org>
Tested-by: Khalid Masum <khalid.masum.92@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Link: https://lore.kernel.org/r/YuV9apZGNmGfjcor@p100
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/vt/vt.c |   12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -4175,9 +4175,11 @@ static int con_font_set(struct vc_data *
 	console_lock();
 	if (vc->vc_mode != KD_TEXT)
 		rc = -EINVAL;
-	else if (vc->vc_sw->con_font_set)
+	else if (vc->vc_sw->con_font_set) {
+		if (vc_is_sel(vc))
+			clear_selection();
 		rc = vc->vc_sw->con_font_set(vc, &font, op->flags);
-	else
+	} else
 		rc = -ENOSYS;
 	console_unlock();
 	kfree(font.data);
@@ -4204,9 +4206,11 @@ static int con_font_default(struct vc_da
 		console_unlock();
 		return -EINVAL;
 	}
-	if (vc->vc_sw->con_font_default)
+	if (vc->vc_sw->con_font_default) {
+		if (vc_is_sel(vc))
+			clear_selection();
 		rc = vc->vc_sw->con_font_default(vc, &font, s);
-	else
+	} else
 		rc = -ENOSYS;
 	console_unlock();
 	if (!rc) {

[PATCH 4.14 12/61] USB: serial: ftdi_sio: add Omron CS1W-CIF31 device id

[Greg Kroah-Hartman]

From: Niek Nooijens <niek.nooijens@omron.com>

commit 001047ea241a9646010b2744451dfbc7289542f3 upstream.

works perfectly with:
modprobe ftdi_sio
echo "0590 00b2" | tee
/sys/module/ftdi_sio/drivers/usb-serial\:ftdi_sio/new_id > /dev/null

but doing this every reboot is a pain in the ass.

Signed-off-by: Niek Nooijens <niek.nooijens@omron.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/ftdi_sio.c     |    2 ++
 drivers/usb/serial/ftdi_sio_ids.h |    6 ++++++
 2 files changed, 8 insertions(+)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1040,6 +1040,8 @@ static const struct usb_device_id id_tab
 	/* IDS GmbH devices */
 	{ USB_DEVICE(IDS_VID, IDS_SI31A_PID) },
 	{ USB_DEVICE(IDS_VID, IDS_CM31A_PID) },
+	/* Omron devices */
+	{ USB_DEVICE(OMRON_VID, OMRON_CS1W_CIF31_PID) },
 	/* U-Blox devices */
 	{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ZED_PID) },
 	{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ODIN_PID) },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -662,6 +662,12 @@
 #define INFINEON_TRIBOARD_TC2X7_PID	0x0043 /* DAS JTAG TriBoard TC2X7 V1.0 */
 
 /*
+ * Omron corporation (https://www.omron.com)
+ */
+ #define OMRON_VID			0x0590
+ #define OMRON_CS1W_CIF31_PID		0x00b2
+
+/*
  * Acton Research Corp.
  */
 #define ACTON_VID		0x0647	/* Vendor ID */

[PATCH 4.14 13/61] binder: fix UAF of ref->proc caused by race condition

[Greg Kroah-Hartman]

From: Carlos Llamas <cmllamas@google.com>

commit a0e44c64b6061dda7e00b7c458e4523e2331b739 upstream.

A transaction of type BINDER_TYPE_WEAK_HANDLE can fail to increment the
reference for a node. In this case, the target proc normally releases
the failed reference upon close as expected. However, if the target is
dying in parallel the call will race with binder_deferred_release(), so
the target could have released all of its references by now leaving the
cleanup of the new failed reference unhandled.

The transaction then ends and the target proc gets released making the
ref->proc now a dangling pointer. Later on, ref->node is closed and we
attempt to take spin_lock(&ref->proc->inner_lock), which leads to the
use-after-free bug reported below. Let's fix this by cleaning up the
failed reference on the spot instead of relying on the target to do so.

  ==================================================================
  BUG: KASAN: use-after-free in _raw_spin_lock+0xa8/0x150
  Write of size 4 at addr ffff5ca207094238 by task kworker/1:0/590

  CPU: 1 PID: 590 Comm: kworker/1:0 Not tainted 5.19.0-rc8 #10
  Hardware name: linux,dummy-virt (DT)
  Workqueue: events binder_deferred_func
  Call trace:
   dump_backtrace.part.0+0x1d0/0x1e0
   show_stack+0x18/0x70
   dump_stack_lvl+0x68/0x84
   print_report+0x2e4/0x61c
   kasan_report+0xa4/0x110
   kasan_check_range+0xfc/0x1a4
   __kasan_check_write+0x3c/0x50
   _raw_spin_lock+0xa8/0x150
   binder_deferred_func+0x5e0/0x9b0
   process_one_work+0x38c/0x5f0
   worker_thread+0x9c/0x694
   kthread+0x188/0x190
   ret_from_fork+0x10/0x20

Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Cc: stable <stable@kernel.org> # 4.14+
Link: https://lore.kernel.org/r/20220801182511.3371447-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/android/binder.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -1757,6 +1757,18 @@ static int binder_inc_ref_for_node(struc
 	}
 	ret = binder_inc_ref_olocked(ref, strong, target_list);
 	*rdata = ref->data;
+	if (ret && ref == new_ref) {
+		/*
+		 * Cleanup the failed reference here as the target
+		 * could now be dead and have already released its
+		 * references by now. Calling on the new reference
+		 * with strong=0 and a tmp_refs will not decrement
+		 * the node. The new_ref gets kfree'd below.
+		 */
+		binder_cleanup_ref_olocked(new_ref);
+		ref = NULL;
+	}
+
 	binder_proc_unlock(proc);
 	if (new_ref && ref != new_ref)
 		/*

[PATCH 4.14 14/61] drm/i915/reg: Fix spelling mistake "Unsupport" -> "Unsupported"

[Greg Kroah-Hartman]

From: Colin Ian King <colin.i.king@gmail.com>

[ Upstream commit 233f56745be446b289edac2ba8184c09365c005e ]

There is a spelling mistake in a gvt_vgpu_err error message. Fix it.

Fixes: 695fbc08d80f ("drm/i915/gvt: replace the gvt_err with gvt_vgpu_err")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220315202449.2952845-1-colin.i.king@gmail.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/i915/gvt/handlers.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/gvt/handlers.c b/drivers/gpu/drm/i915/gvt/handlers.c
index a5bed2e71b926..2a6c3004ff6d9 100644
--- a/drivers/gpu/drm/i915/gvt/handlers.c
+++ b/drivers/gpu/drm/i915/gvt/handlers.c
@@ -601,7 +601,7 @@ static int update_fdi_rx_iir_status(struct intel_vgpu *vgpu,
 	else if (FDI_RX_IMR_TO_PIPE(offset) != INVALID_INDEX)
 		index = FDI_RX_IMR_TO_PIPE(offset);
 	else {
-		gvt_vgpu_err("Unsupport registers %x\n", offset);
+		gvt_vgpu_err("Unsupported registers %x\n", offset);
 		return -EINVAL;
 	}
 
-- 
2.35.1

[PATCH 4.14 15/61] Input: rk805-pwrkey - fix module autoloading

[Greg Kroah-Hartman]

From: Peter Robinson <pbrobinson@gmail.com>

[ Upstream commit 99077ad668ddd9b4823cc8ce3f3c7a3fc56f6fd9 ]

Add the module alias so the rk805-pwrkey driver will
autoload when built as a module.

Fixes: 5a35b85c2d92 ("Input: add power key driver for Rockchip RK805 PMIC")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20220612225437.3628788-1-pbrobinson@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/misc/rk805-pwrkey.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/input/misc/rk805-pwrkey.c b/drivers/input/misc/rk805-pwrkey.c
index 921003963a53c..cdcad5c01e3c0 100644
--- a/drivers/input/misc/rk805-pwrkey.c
+++ b/drivers/input/misc/rk805-pwrkey.c
@@ -106,6 +106,7 @@ static struct platform_driver rk805_pwrkey_driver = {
 };
 module_platform_driver(rk805_pwrkey_driver);
 
+MODULE_ALIAS("platform:rk805-pwrkey");
 MODULE_AUTHOR("Joseph Chen <chenjh@rock-chips.com>");
 MODULE_DESCRIPTION("RK805 PMIC Power Key driver");
 MODULE_LICENSE("GPL");
-- 
2.35.1

[PATCH 4.14 16/61] hwmon: (gpio-fan) Fix array out of bounds access

[Greg Kroah-Hartman]

From: Armin Wolf <W_Armin@gmx.de>

[ Upstream commit f233d2be38dbbb22299192292983037f01ab363c ]

The driver does not check if the cooling state passed to
gpio_fan_set_cur_state() exceeds the maximum cooling state as
stored in fan_data->num_speeds. Since the cooling state is later
used as an array index in set_fan_speed(), an array out of bounds
access can occur.
This can be exploited by setting the state of the thermal cooling device
to arbitrary values, causing for example a kernel oops when unavailable
memory is accessed this way.

Example kernel oops:
[  807.987276] Unable to handle kernel paging request at virtual address ffffff80d0588064
[  807.987369] Mem abort info:
[  807.987398]   ESR = 0x96000005
[  807.987428]   EC = 0x25: DABT (current EL), IL = 32 bits
[  807.987477]   SET = 0, FnV = 0
[  807.987507]   EA = 0, S1PTW = 0
[  807.987536]   FSC = 0x05: level 1 translation fault
[  807.987570] Data abort info:
[  807.987763]   ISV = 0, ISS = 0x00000005
[  807.987801]   CM = 0, WnR = 0
[  807.987832] swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000001165000
[  807.987872] [ffffff80d0588064] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[  807.987961] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[  807.987992] Modules linked in: cmac algif_hash aes_arm64 algif_skcipher af_alg bnep hci_uart btbcm bluetooth ecdh_generic ecc 8021q garp stp llc snd_soc_hdmi_codec brcmfmac vc4 brcmutil cec drm_kms_helper snd_soc_core cfg80211 snd_compress bcm2835_codec(C) snd_pcm_dmaengine syscopyarea bcm2835_isp(C) bcm2835_v4l2(C) sysfillrect v4l2_mem2mem bcm2835_mmal_vchiq(C) raspberrypi_hwmon sysimgblt videobuf2_dma_contig videobuf2_vmalloc fb_sys_fops videobuf2_memops rfkill videobuf2_v4l2 videobuf2_common i2c_bcm2835 snd_bcm2835(C) videodev snd_pcm snd_timer snd mc vc_sm_cma(C) gpio_fan uio_pdrv_genirq uio drm fuse drm_panel_orientation_quirks backlight ip_tables x_tables ipv6
[  807.988508] CPU: 0 PID: 1321 Comm: bash Tainted: G         C        5.15.56-v8+ #1575
[  807.988548] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT)
[  807.988574] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  807.988608] pc : set_fan_speed.part.5+0x34/0x80 [gpio_fan]
[  807.988654] lr : gpio_fan_set_cur_state+0x34/0x50 [gpio_fan]
[  807.988691] sp : ffffffc008cf3bd0
[  807.988710] x29: ffffffc008cf3bd0 x28: ffffff80019edac0 x27: 0000000000000000
[  807.988762] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff800747c920
[  807.988787] x23: 000000000000000a x22: ffffff800369f000 x21: 000000001999997c
[  807.988854] x20: ffffff800369f2e8 x19: ffffff8002ae8080 x18: 0000000000000000
[  807.988877] x17: 0000000000000000 x16: 0000000000000000 x15: 000000559e271b70
[  807.988938] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[  807.988960] x11: 0000000000000000 x10: ffffffc008cf3c20 x9 : ffffffcfb60c741c
[  807.989018] x8 : 000000000000000a x7 : 00000000ffffffc9 x6 : 0000000000000009
[  807.989040] x5 : 000000000000002a x4 : 0000000000000000 x3 : ffffff800369f2e8
[  807.989062] x2 : 000000000000e780 x1 : 0000000000000001 x0 : ffffff80d0588060
[  807.989084] Call trace:
[  807.989091]  set_fan_speed.part.5+0x34/0x80 [gpio_fan]
[  807.989113]  gpio_fan_set_cur_state+0x34/0x50 [gpio_fan]
[  807.989199]  cur_state_store+0x84/0xd0
[  807.989221]  dev_attr_store+0x20/0x38
[  807.989262]  sysfs_kf_write+0x4c/0x60
[  807.989282]  kernfs_fop_write_iter+0x130/0x1c0
[  807.989298]  new_sync_write+0x10c/0x190
[  807.989315]  vfs_write+0x254/0x378
[  807.989362]  ksys_write+0x70/0xf8
[  807.989379]  __arm64_sys_write+0x24/0x30
[  807.989424]  invoke_syscall+0x4c/0x110
[  807.989442]  el0_svc_common.constprop.3+0xfc/0x120
[  807.989458]  do_el0_svc+0x2c/0x90
[  807.989473]  el0_svc+0x24/0x60
[  807.989544]  el0t_64_sync_handler+0x90/0xb8
[  807.989558]  el0t_64_sync+0x1a0/0x1a4
[  807.989579] Code: b9403801 f9402800 7100003f 8b35cc00 (b9400416)
[  807.989627] ---[ end trace 8ded4c918658445b ]---

Fix this by checking the cooling state and return an error if it
exceeds the maximum cooling state.

Tested on a Raspberry Pi 3.

Fixes: b5cf88e46bad ("(gpio-fan): Add thermal control hooks")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20220830011101.178843-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/gpio-fan.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c
index 9c355b9d31c57..d1b47d20f2fab 100644
--- a/drivers/hwmon/gpio-fan.c
+++ b/drivers/hwmon/gpio-fan.c
@@ -422,6 +422,9 @@ static int gpio_fan_set_cur_state(struct thermal_cooling_device *cdev,
 	if (!fan_data)
 		return -EINVAL;
 
+	if (state >= fan_data->num_speed)
+		return -EINVAL;
+
 	set_fan_speed(fan_data, state);
 	return 0;
 }
-- 
2.35.1

[PATCH 4.14 17/61] thunderbolt: Use the actual buffer in tb_async_error()

[Greg Kroah-Hartman]

From: Mika Westerberg <mika.westerberg@linux.intel.com>

commit eb100b8fa8e8b59eb3e5fc7a5fd4a1e3c5950f64 upstream.

The received notification packet is held in pkg->buffer and not in pkg
itself. Fix this by using the correct buffer.

Fixes: 81a54b5e1986 ("thunderbolt: Let the connection manager handle all notifications")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/thunderbolt/ctl.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/thunderbolt/ctl.c
+++ b/drivers/thunderbolt/ctl.c
@@ -401,7 +401,7 @@ static void tb_ctl_rx_submit(struct ctl_
 
 static int tb_async_error(const struct ctl_pkg *pkg)
 {
-	const struct cfg_error_pkg *error = (const struct cfg_error_pkg *)pkg;
+	const struct cfg_error_pkg *error = pkg->buffer;
 
 	if (pkg->frame.eof != TB_CFG_PKG_ERROR)
 		return false;

[PATCH 4.14 18/61] xhci: Add grace period after xHC start to prevent premature runtime suspend.

[Greg Kroah-Hartman]

From: Mathias Nyman <mathias.nyman@linux.intel.com>

commit 33e321586e37b642ad10594b9ef25a613555cd08 upstream.

After xHC controller is started, either in probe or resume, it can take
a while before any of the connected usb devices are visible to the roothub
due to link training.

It's possible xhci driver loads, sees no acivity and suspends the host
before the USB device is visible.

In one testcase with a hotplugged xHC controller the host finally detected
the connected USB device and generated a wake 500ms after host initial
start.

If hosts didn't suspend the device duringe training it probablty wouldn't
take up to 500ms to detect it, but looking at specs reveal USB3 link
training has a couple long timeout values, such as 120ms
RxDetectQuietTimeout, and 360ms PollingLFPSTimeout.

So Add a 500ms grace period that keeps polling the roothub for 500ms after
start, preventing runtime suspend until USB devices are detected.

Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220825150840.132216-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-hub.c |   11 +++++++++++
 drivers/usb/host/xhci.c     |    4 +++-
 drivers/usb/host/xhci.h     |    2 +-
 3 files changed, 15 insertions(+), 2 deletions(-)

--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1455,6 +1455,17 @@ int xhci_hub_status_data(struct usb_hcd
 
 	status = bus_state->resuming_ports;
 
+	/*
+	 * SS devices are only visible to roothub after link training completes.
+	 * Keep polling roothubs for a grace period after xHC start
+	 */
+	if (xhci->run_graceperiod) {
+		if (time_before(jiffies, xhci->run_graceperiod))
+			status = 1;
+		else
+			xhci->run_graceperiod = 0;
+	}
+
 	mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC | PORT_CEC;
 
 	/* For each port, did anything change?  If so, set that bit in buf. */
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -159,9 +159,11 @@ int xhci_start(struct xhci_hcd *xhci)
 		xhci_err(xhci, "Host took too long to start, "
 				"waited %u microseconds.\n",
 				XHCI_MAX_HALT_USEC);
-	if (!ret)
+	if (!ret) {
 		/* clear state flags. Including dying, halted or removing */
 		xhci->xhc_state = 0;
+		xhci->run_graceperiod = jiffies + msecs_to_jiffies(500);
+	}
 
 	return ret;
 }
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1780,7 +1780,7 @@ struct xhci_hcd {
 
 	/* Host controller watchdog timer structures */
 	unsigned int		xhc_state;
-
+	unsigned long		run_graceperiod;
 	u32			command;
 	struct s3_save		s3;
 /* Host controller is dying - not responding to commands. "I'm not dead yet!"

[PATCH 4.14 19/61] USB: serial: cp210x: add Decagon UCA device id

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit ceb4038472a4803e7046ed488b03d11551991514 upstream.

Add the device id for Decagon Devices USB Cable Adapter.

Link: https://lore.kernel.org/r/trinity-819f9db2-d3e1-40e9-a669-9c245817c046-1661523546680@msvc-mesg-web108
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/cp210x.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -134,6 +134,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x10C4, 0x83AA) }, /* Mark-10 Digital Force Gauge */
 	{ USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */
 	{ USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
+	{ USB_DEVICE(0x10C4, 0x8414) }, /* Decagon USB Cable Adapter */
 	{ USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */
 	{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
 	{ USB_DEVICE(0x10C4, 0x8470) }, /* Juniper Networks BX Series System Console */

[PATCH 4.14 20/61] USB: serial: option: add support for OPPO R11 diag port

[Greg Kroah-Hartman]

From: Yan Xinyu <sdlyyxy@bupt.edu.cn>

commit 8d5fc280392735e4441b35de14f2f4860fa8d83c upstream.

Add support for OPPO R11 USB diag serial port to option driver. This
phone uses Qualcomm Snapdragon 660 SoC.

usb-devices output:
T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=22d9 ProdID=276c Rev=04.04
S:  Manufacturer=OPPO
S:  Product=SDM660-MTP _SN:09C6BCA7
S:  SerialNumber=beb2c403
C:  #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
I:  If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs

Signed-off-by: Yan Xinyu <sdlyyxy@bupt.edu.cn>
Link: https://lore.kernel.org/r/20220714102037.4113889-1-sdlyyxy@bupt.edu.cn
Link: https://lore.kernel.org/r/Yt1WfSZk03Plpnan@hovoldconsulting.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -576,6 +576,10 @@ static void option_instat_callback(struc
 #define WETELECOM_PRODUCT_6802			0x6802
 #define WETELECOM_PRODUCT_WMD300		0x6803
 
+/* OPPO products */
+#define OPPO_VENDOR_ID				0x22d9
+#define OPPO_PRODUCT_R11			0x276c
+
 
 /* Device flags */
 
@@ -2157,6 +2161,7 @@ static const struct usb_device_id option
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) },			/* GosunCn GM500 RNDIS */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) },			/* GosunCn GM500 MBIM */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) },			/* GosunCn GM500 ECM/NCM */
+	{ USB_DEVICE_AND_INTERFACE_INFO(OPPO_VENDOR_ID, OPPO_PRODUCT_R11, 0xff, 0xff, 0x30) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);

[PATCH 4.14 21/61] USB: serial: option: add Quectel EM060K modem

[Greg Kroah-Hartman]

From: Yonglin Tan <yonglin.tan@outlook.com>

commit f766f3abe6dbc9bf8b56a5d53c87e5a17942c154 upstream.

Add usb product id entry for the Quectel EM060K module.

"MBIM mode": DIAG + NMEA + AT + MODEM + MBIM + QDSS

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  8 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=030b Rev= 5.04
S:  Manufacturer=Quectel
S:  Product=EM060K-GL
S:  SerialNumber=89fb57db
C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA
A:  FirstIf#= 8 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=88(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 9 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 9 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#=12 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Yonglin Tan <yonglin.tan@outlook.com>
[ johan: mention QDSS port and sort entries ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -256,6 +256,7 @@ static void option_instat_callback(struc
 #define QUECTEL_PRODUCT_BG96			0x0296
 #define QUECTEL_PRODUCT_EP06			0x0306
 #define QUECTEL_PRODUCT_EM05G			0x030a
+#define QUECTEL_PRODUCT_EM060K			0x030b
 #define QUECTEL_PRODUCT_EM12			0x0512
 #define QUECTEL_PRODUCT_RM500Q			0x0800
 #define QUECTEL_PRODUCT_EC200S_CN		0x6002
@@ -1145,6 +1146,9 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) },
 	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G, 0xff),
 	  .driver_info = RSVD(6) | ZLP },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff),
 	  .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) },

[PATCH 4.14 22/61] USB: serial: option: add support for Cinterion MV32-WA/WB RmNet mode

[Greg Kroah-Hartman]

From: Slark Xiao <slark_xiao@163.com>

commit 8ffe20d08f2c95d702c453020d03a4c568a988f0 upstream.

We added PIDs for MV32-WA/WB MBIM mode before, now we need to add
support for RmNet mode.

Test evidence as below:
T:  Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1e2d ProdID=00f3 Rev=05.04
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00F3 USB Mobile Broadband
S:  SerialNumber=d7b4be8d
C:  #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

T:  Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 10 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1e2d ProdID=00f4 Rev=05.04
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00F4 USB Mobile Broadband
S:  SerialNumber=d095087d
C:  #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

Signed-off-by: Slark Xiao <slark_xiao@163.com>
[ johan: sort entries ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -442,6 +442,8 @@ static void option_instat_callback(struc
 #define CINTERION_PRODUCT_MV31_2_RMNET		0x00b9
 #define CINTERION_PRODUCT_MV32_WA		0x00f1
 #define CINTERION_PRODUCT_MV32_WB		0x00f2
+#define CINTERION_PRODUCT_MV32_WA_RMNET		0x00f3
+#define CINTERION_PRODUCT_MV32_WB_RMNET		0x00f4
 
 /* Olivetti products */
 #define OLIVETTI_VENDOR_ID			0x0b3c
@@ -2004,8 +2006,12 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(0)},
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WA, 0xff),
 	  .driver_info = RSVD(3)},
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WA_RMNET, 0xff),
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WB, 0xff),
 	  .driver_info = RSVD(3)},
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WB_RMNET, 0xff),
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100),
 	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD120),

[PATCH 4.14 23/61] usb: dwc2: fix wrong order of phy_power_on and phy_init

[Greg Kroah-Hartman]

From: Heiner Kallweit <hkallweit1@gmail.com>

commit f9b995b49a07bd0d43b0e490f59be84415c745ae upstream.

Since 1599069a62c6 ("phy: core: Warn when phy_power_on is called before
phy_init") the driver complains. In my case (Amlogic SoC) the warning
is: phy phy-fe03e000.phy.2: phy_power_on was called before phy_init
So change the order of the two calls. The same change has to be done
to the order of phy_exit() and phy_power_off().

Fixes: 09a75e857790 ("usb: dwc2: refactor common low-level hw code to platform.c")
Cc: stable@vger.kernel.org
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/dfcc6b40-2274-4e86-e73c-5c5e6aa3e046@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc2/platform.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -141,9 +141,9 @@ static int __dwc2_lowlevel_hw_enable(str
 	} else if (hsotg->plat && hsotg->plat->phy_init) {
 		ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
 	} else {
-		ret = phy_power_on(hsotg->phy);
+		ret = phy_init(hsotg->phy);
 		if (ret == 0)
-			ret = phy_init(hsotg->phy);
+			ret = phy_power_on(hsotg->phy);
 	}
 
 	return ret;
@@ -175,9 +175,9 @@ static int __dwc2_lowlevel_hw_disable(st
 	} else if (hsotg->plat && hsotg->plat->phy_exit) {
 		ret = hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
 	} else {
-		ret = phy_exit(hsotg->phy);
+		ret = phy_power_off(hsotg->phy);
 		if (ret == 0)
-			ret = phy_power_off(hsotg->phy);
+			ret = phy_exit(hsotg->phy);
 	}
 	if (ret)
 		return ret;

[PATCH 4.14 24/61] USB: cdc-acm: Add Icom PMR F3400 support (0c26:0020)

[Greg Kroah-Hartman]

From: Thierry GUIBERT <thierry.guibert@croix-rouge.fr>

commit a10bc71729b236fe36de0d8e4d35c959fd8dec3a upstream.

Supports for ICOM F3400 and ICOM F4400 PMR radios in CDC-ACM driver
enabling the AT serial port.
The Vendor Id is 0x0C26
The Product ID is 0x0020

Output of lsusb :
Bus 001 Device 009: ID 0c26:0020 Prolific Technology Inc. ICOM Radio
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            2 Communications
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x0c26 Prolific Technology Inc.
  idProduct          0x0020
  bcdDevice            0.00
  iManufacturer           1 ICOM Inc.
  iProduct                2 ICOM Radio
  iSerial                 3 *obfuscated*
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0030
    bNumInterfaces          2
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xc0
      Self Powered
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval              12
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0

Signed-off-by: Thierry GUIBERT <thierry.guibert@croix-rouge.fr>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220819081702.84118-1-thierry.guibert@croix-rouge.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/class/cdc-acm.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1894,6 +1894,9 @@ static const struct usb_device_id acm_id
 	{ USB_DEVICE(0x09d8, 0x0320), /* Elatec GmbH TWN3 */
 	.driver_info = NO_UNION_NORMAL, /* has misplaced union descriptor */
 	},
+	{ USB_DEVICE(0x0c26, 0x0020), /* Icom ICF3400 Serie */
+	.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
+	},
 	{ USB_DEVICE(0x0ca6, 0xa050), /* Castles VEGA3000 */
 	.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
 	},

[PATCH 4.14 25/61] usb-storage: Add ignore-residue quirk for NXP PN7462AU

[Greg Kroah-Hartman]

From: Witold Lipieta <witold.lipieta@thaumatec.com>

commit 2aa48857ad52236a9564c71183d6cc8893becd41 upstream.

This is USB mass storage primary boot loader for code download on
NXP PN7462AU.

Without the quirk it is impossible to write whole memory at once as
device restarts during the write due to bogus residue values reported.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Witold Lipieta <witold.lipieta@thaumatec.com>
Link: https://lore.kernel.org/r/20220809112911.462776-1-witold.lipieta@thaumatec.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/storage/unusual_devs.h |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -2313,6 +2313,13 @@ UNUSUAL_DEV( 0x1e74, 0x4621, 0x0000, 0x0
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ),
 
+/* Reported by Witold Lipieta <witold.lipieta@thaumatec.com> */
+UNUSUAL_DEV( 0x1fc9, 0x0117, 0x0100, 0x0100,
+		"NXP Semiconductors",
+		"PN7462AU",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
 /* Supplied with some Castlewood ORB removable drives */
 UNUSUAL_DEV(  0x2027, 0xa001, 0x0000, 0x9999,
 		"Double-H Technology",

[PATCH 4.14 26/61] s390/hugetlb: fix prepare_hugepage_range() check for 2 GB hugepages

[Greg Kroah-Hartman]

From: Gerald Schaefer <gerald.schaefer@linux.ibm.com>

commit 7c8d42fdf1a84b1a0dd60d6528309c8ec127e87c upstream.

The alignment check in prepare_hugepage_range() is wrong for 2 GB
hugepages, it only checks for 1 MB hugepage alignment.

This can result in kernel crash in __unmap_hugepage_range() at the
BUG_ON(start & ~huge_page_mask(h)) alignment check, for mappings
created with MAP_FIXED at unaligned address.

Fix this by correctly handling multiple hugepage sizes, similar to the
generic version of prepare_hugepage_range().

Fixes: d08de8e2d867 ("s390/mm: add support for 2GB hugepages")
Cc: <stable@vger.kernel.org> # 4.8+
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/s390/include/asm/hugetlb.h |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/arch/s390/include/asm/hugetlb.h
+++ b/arch/s390/include/asm/hugetlb.h
@@ -30,9 +30,11 @@ pte_t huge_ptep_get_and_clear(struct mm_
 static inline int prepare_hugepage_range(struct file *file,
 			unsigned long addr, unsigned long len)
 {
-	if (len & ~HPAGE_MASK)
+	struct hstate *h = hstate_file(file);
+
+	if (len & ~huge_page_mask(h))
 		return -EINVAL;
-	if (addr & ~HPAGE_MASK)
+	if (addr & ~huge_page_mask(h))
 		return -EINVAL;
 	return 0;
 }

[PATCH 4.14 27/61] s390: fix nospec table alignments

[Greg Kroah-Hartman]

From: Josh Poimboeuf <jpoimboe@kernel.org>

commit c9305b6c1f52060377c72aebe3a701389e9f3172 upstream.

Add proper alignment for .nospec_call_table and .nospec_return_table in
vmlinux.

[hca@linux.ibm.com]: The problem with the missing alignment of the nospec
tables exist since a long time, however only since commit e6ed91fd0768
("s390/alternatives: remove padding generation code") and with
CONFIG_RELOCATABLE=n the kernel may also crash at boot time.

The above named commit reduced the size of struct alt_instr by one byte,
so its new size is 11 bytes. Therefore depending on the number of cpu
alternatives the size of the __alt_instructions array maybe odd, which
again also causes that the addresses of the nospec tables will be odd.

If the address of __nospec_call_start is odd and the kernel is compiled
With CONFIG_RELOCATABLE=n the compiler may generate code that loads the
address of __nospec_call_start with a 'larl' instruction.

This will generate incorrect code since the 'larl' instruction only works
with even addresses. In result the members of the nospec tables will be
accessed with an off-by-one offset, which subsequently may lead to
addressing exceptions within __nospec_revert().

Fixes: f19fbd5ed642 ("s390: introduce execute-trampolines for branches")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/8719bf1ce4a72ebdeb575200290094e9ce047bcc.1661557333.git.jpoimboe@kernel.org
Cc: <stable@vger.kernel.org> # 4.16
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/s390/kernel/vmlinux.lds.S |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -131,6 +131,7 @@ SECTIONS
 	/*
 	 * Table with the patch locations to undo expolines
 	*/
+	. = ALIGN(4);
 	.nospec_call_table : {
 		__nospec_call_start = . ;
 		*(.s390_indirect*)

[PATCH 4.14 28/61] USB: core: Prevent nested device-reset calls

[Greg Kroah-Hartman]

From: Alan Stern <stern@rowland.harvard.edu>

commit 9c6d778800b921bde3bff3cff5003d1650f942d1 upstream.

Automatic kernel fuzzing revealed a recursive locking violation in
usb-storage:

============================================
WARNING: possible recursive locking detected
5.18.0 #3 Not tainted
--------------------------------------------
kworker/1:3/1205 is trying to acquire lock:
ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at:
usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230

but task is already holding lock:
ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at:
usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230

...

stack backtrace:
CPU: 1 PID: 1205 Comm: kworker/1:3 Not tainted 5.18.0 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.13.0-1ubuntu1.1 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_deadlock_bug kernel/locking/lockdep.c:2988 [inline]
check_deadlock kernel/locking/lockdep.c:3031 [inline]
validate_chain kernel/locking/lockdep.c:3816 [inline]
__lock_acquire.cold+0x152/0x3ca kernel/locking/lockdep.c:5053
lock_acquire kernel/locking/lockdep.c:5665 [inline]
lock_acquire+0x1ab/0x520 kernel/locking/lockdep.c:5630
__mutex_lock_common kernel/locking/mutex.c:603 [inline]
__mutex_lock+0x14f/0x1610 kernel/locking/mutex.c:747
usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230
usb_reset_device+0x37d/0x9a0 drivers/usb/core/hub.c:6109
r871xu_dev_remove+0x21a/0x270 drivers/staging/rtl8712/usb_intf.c:622
usb_unbind_interface+0x1bd/0x890 drivers/usb/core/driver.c:458
device_remove drivers/base/dd.c:545 [inline]
device_remove+0x11f/0x170 drivers/base/dd.c:537
__device_release_driver drivers/base/dd.c:1222 [inline]
device_release_driver_internal+0x1a7/0x2f0 drivers/base/dd.c:1248
usb_driver_release_interface+0x102/0x180 drivers/usb/core/driver.c:627
usb_forced_unbind_intf+0x4d/0xa0 drivers/usb/core/driver.c:1118
usb_reset_device+0x39b/0x9a0 drivers/usb/core/hub.c:6114

This turned out not to be an error in usb-storage but rather a nested
device reset attempt.  That is, as the rtl8712 driver was being
unbound from a composite device in preparation for an unrelated USB
reset (that driver does not have pre_reset or post_reset callbacks),
its ->remove routine called usb_reset_device() -- thus nesting one
reset call within another.

Performing a reset as part of disconnect processing is a questionable
practice at best.  However, the bug report points out that the USB
core does not have any protection against nested resets.  Adding a
reset_in_progress flag and testing it will prevent such errors in the
future.

Link: https://lore.kernel.org/all/CAB7eexKUpvX-JNiLzhXBDWgfg2T9e9_0Tw4HQ6keN==voRbP0g@mail.gmail.com/
Cc: stable@vger.kernel.org
Reported-and-tested-by: Rondreis <linhaoguo86@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YwkflDxvg0KWqyZK@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/hub.c |   10 ++++++++++
 include/linux/usb.h    |    2 ++
 2 files changed, 12 insertions(+)

--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -5737,6 +5737,11 @@ re_enumerate_no_bos:
  * the reset is over (using their post_reset method).
  *
  * Return: The same as for usb_reset_and_verify_device().
+ * However, if a reset is already in progress (for instance, if a
+ * driver doesn't have pre_ or post_reset() callbacks, and while
+ * being unbound or re-bound during the ongoing reset its disconnect()
+ * or probe() routine tries to perform a second, nested reset), the
+ * routine returns -EINPROGRESS.
  *
  * Note:
  * The caller must own the device lock.  For example, it's safe to use
@@ -5770,6 +5775,10 @@ int usb_reset_device(struct usb_device *
 		return -EISDIR;
 	}
 
+	if (udev->reset_in_progress)
+		return -EINPROGRESS;
+	udev->reset_in_progress = 1;
+
 	port_dev = hub->ports[udev->portnum - 1];
 
 	/*
@@ -5834,6 +5843,7 @@ int usb_reset_device(struct usb_device *
 
 	usb_autosuspend_device(udev);
 	memalloc_noio_restore(noio_flag);
+	udev->reset_in_progress = 0;
 	return ret;
 }
 EXPORT_SYMBOL_GPL(usb_reset_device);
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -568,6 +568,7 @@ struct usb3_lpm_parameters {
  * @level: number of USB hub ancestors
  * @can_submit: URBs may be submitted
  * @persist_enabled:  USB_PERSIST enabled for this device
+ * @reset_in_progress: the device is being reset
  * @have_langid: whether string_langid is valid
  * @authorized: policy has said we can use it;
  *	(user space) policy determines if we authorize this device to be
@@ -646,6 +647,7 @@ struct usb_device {
 
 	unsigned can_submit:1;
 	unsigned persist_enabled:1;
+	unsigned reset_in_progress:1;
 	unsigned have_langid:1;
 	unsigned authorized:1;
 	unsigned authenticated:1;

[PATCH 4.14 29/61] usb: gadget: mass_storage: Fix cdrom data transfers on MAC-OS

[Greg Kroah-Hartman]

From: Krishna Kurapati <quic_kriskura@quicinc.com>

commit 9d4dc16ec71bd6368548e9743223e449b4377fc7 upstream.

During cdrom emulation, the response to read_toc command must contain
the cdrom address as the number of sectors (2048 byte sized blocks)
represented either as an absolute value (when MSF bit is '0') or in
terms of PMin/PSec/PFrame (when MSF bit is set to '1'). Incase of
cdrom, the fsg_lun_open call sets the sector size to 2048 bytes.

When MAC OS sends a read_toc request with MSF set to '1', the
store_cdrom_address assumes that the address being provided is the
LUN size represented in 512 byte sized blocks instead of 2048. It
tries to modify the address further to convert it to 2048 byte sized
blocks and store it in MSF format. This results in data transfer
failures as the cdrom address being provided in the read_toc response
is incorrect.

Fixes: 3f565a363cee ("usb: gadget: storage: adapt logic block size to bound block devices")
Cc: stable@vger.kernel.org
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Link: https://lore.kernel.org/r/1661570110-19127-1-git-send-email-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/storage_common.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/usb/gadget/function/storage_common.c
+++ b/drivers/usb/gadget/function/storage_common.c
@@ -298,8 +298,10 @@ EXPORT_SYMBOL_GPL(fsg_lun_fsync_sub);
 void store_cdrom_address(u8 *dest, int msf, u32 addr)
 {
 	if (msf) {
-		/* Convert to Minutes-Seconds-Frames */
-		addr >>= 2;		/* Convert to 2048-byte frames */
+		/*
+		 * Convert to Minutes-Seconds-Frames.
+		 * Sector size is already set to 2048 bytes.
+		 */
 		addr += 2*75;		/* Lead-in occupies 2 seconds */
 		dest[3] = addr % 75;	/* Frames */
 		addr /= 75;

[PATCH 4.14 30/61] wifi: mac80211: Dont finalize CSA in IBSS mode if state is disconnected

[Greg Kroah-Hartman]

From: Siddh Raman Pant <code@siddh.me>

commit 15bc8966b6d3a5b9bfe4c9facfa02f2b69b1e5f0 upstream.

When we are not connected to a channel, sending channel "switch"
announcement doesn't make any sense.

The BSS list is empty in that case. This causes the for loop in
cfg80211_get_bss() to be bypassed, so the function returns NULL
(check line 1424 of net/wireless/scan.c), causing the WARN_ON()
in ieee80211_ibss_csa_beacon() to get triggered (check line 500
of net/mac80211/ibss.c), which was consequently reported on the
syzkaller dashboard.

Thus, check if we have an existing connection before generating
the CSA beacon in ieee80211_ibss_finish_csa().

Cc: stable@vger.kernel.org
Fixes: cd7760e62c2a ("mac80211: add support for CSA in IBSS mode")
Link: https://syzkaller.appspot.com/bug?id=05603ef4ae8926761b678d2939a3b2ad28ab9ca6
Reported-by: syzbot+b6c9fe29aefe68e4ad34@syzkaller.appspotmail.com
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Tested-by: syzbot+b6c9fe29aefe68e4ad34@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20220814151512.9985-1-code@siddh.me
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mac80211/ibss.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -544,6 +544,10 @@ int ieee80211_ibss_finish_csa(struct iee
 
 	sdata_assert_lock(sdata);
 
+	/* When not connected/joined, sending CSA doesn't make sense. */
+	if (ifibss->state != IEEE80211_IBSS_MLME_JOINED)
+		return -ENOLINK;
+
 	/* update cfg80211 bss information with the new channel */
 	if (!is_zero_ether_addr(ifibss->bssid)) {
 		cbss = cfg80211_get_bss(sdata->local->hw.wiphy,

[PATCH 4.14 31/61] net: mac802154: Fix a condition in the receive path

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@bootlin.com>

commit f0da47118c7e93cdbbc6fb403dd729a5f2c90ee3 upstream.

Upon reception, a packet must be categorized, either it's destination is
the host, or it is another host. A packet with no destination addressing
fields may be valid in two situations:
- the packet has no source field: only ACKs are built like that, we
  consider the host as the destination.
- the packet has a valid source field: it is directed to the PAN
  coordinator, as for know we don't have this information we consider we
  are not the PAN coordinator.

There was likely a copy/paste error made during a previous cleanup
because the if clause is now containing exactly the same condition as in
the switch case, which can never be true. In the past the destination
address was used in the switch and the source address was used in the
if, which matches what the spec says.

Cc: stable@vger.kernel.org
Fixes: ae531b9475f6 ("ieee802154: use ieee802154_addr instead of *_sa variants")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220826142954.254853-1-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mac802154/rx.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/mac802154/rx.c
+++ b/net/mac802154/rx.c
@@ -52,7 +52,7 @@ ieee802154_subif_frame(struct ieee802154
 
 	switch (mac_cb(skb)->dest.mode) {
 	case IEEE802154_ADDR_NONE:
-		if (mac_cb(skb)->dest.mode != IEEE802154_ADDR_NONE)
+		if (hdr->source.mode != IEEE802154_ADDR_NONE)
 			/* FIXME: check if we are PAN coordinator */
 			skb->pkt_type = PACKET_OTHERHOST;
 		else

[PATCH 4.14 32/61] ALSA: seq: oss: Fix data-race for max_midi_devs access

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 22dec134dbfa825b963f8a1807ad19b943e46a56 upstream.

ALSA OSS sequencer refers to a global variable max_midi_devs at
creating a new port, storing it to its own field.  Meanwhile this
variable may be changed by other sequencer events at
snd_seq_oss_midi_check_exit_port() in parallel, which may cause a data
race.

OTOH, this data race itself is almost harmless, as the access to the
MIDI device is done via get_mdev() and it's protected with a refcount,
hence its presence is guaranteed.

Though, it's sill better to address the data-race from the code sanity
POV, and this patch adds the proper spinlock for the protection.

Reported-by: Abhishek Shah <abhishek.shah@columbia.edu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAEHB2493pZRXs863w58QWnUTtv3HHfg85aYhLn5HJHCwxqtHQg@mail.gmail.com
Link: https://lore.kernel.org/r/20220823072717.1706-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/core/seq/oss/seq_oss_midi.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/sound/core/seq/oss/seq_oss_midi.c
+++ b/sound/core/seq/oss/seq_oss_midi.c
@@ -280,7 +280,9 @@ snd_seq_oss_midi_clear_all(void)
 void
 snd_seq_oss_midi_setup(struct seq_oss_devinfo *dp)
 {
+	spin_lock_irq(&register_lock);
 	dp->max_mididev = max_midi_devs;
+	spin_unlock_irq(&register_lock);
 }
 
 /*

[PATCH 4.14 33/61] ALSA: seq: Fix data-race at module auto-loading

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 3e7e04b747adea36f349715d9f0998eeebf15d72 upstream.

It's been reported that there is a possible data-race accessing to the
global card_requested[] array at ALSA sequencer core, which is used
for determining whether to call request_module() for the card or not.
This data race itself is almost harmless, as it might end up with one
extra request_module() call for the already loaded module at most.
But it's still better to fix.

This patch addresses the possible data race of card_requested[] and
client_requested[] arrays by replacing them with bitmask.
It's an atomic operation and can work without locks.

Reported-by: Abhishek Shah <abhishek.shah@columbia.edu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAEHB24_ay6YzARpA1zgCsE7=H9CSJJzux618E=Ka4h0YdKn=qA@mail.gmail.com
Link: https://lore.kernel.org/r/20220823072717.1706-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/core/seq/seq_clientmgr.c |   12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

--- a/sound/core/seq/seq_clientmgr.c
+++ b/sound/core/seq/seq_clientmgr.c
@@ -136,13 +136,13 @@ struct snd_seq_client *snd_seq_client_us
 	spin_unlock_irqrestore(&clients_lock, flags);
 #ifdef CONFIG_MODULES
 	if (!in_interrupt()) {
-		static char client_requested[SNDRV_SEQ_GLOBAL_CLIENTS];
-		static char card_requested[SNDRV_CARDS];
+		static DECLARE_BITMAP(client_requested, SNDRV_SEQ_GLOBAL_CLIENTS);
+		static DECLARE_BITMAP(card_requested, SNDRV_CARDS);
+
 		if (clientid < SNDRV_SEQ_GLOBAL_CLIENTS) {
 			int idx;
 			
-			if (!client_requested[clientid]) {
-				client_requested[clientid] = 1;
+			if (!test_and_set_bit(clientid, client_requested)) {
 				for (idx = 0; idx < 15; idx++) {
 					if (seq_client_load[idx] < 0)
 						break;
@@ -157,10 +157,8 @@ struct snd_seq_client *snd_seq_client_us
 			int card = (clientid - SNDRV_SEQ_GLOBAL_CLIENTS) /
 				SNDRV_SEQ_CLIENTS_PER_CARD;
 			if (card < snd_ecards_limit) {
-				if (! card_requested[card]) {
-					card_requested[card] = 1;
+				if (!test_and_set_bit(card, card_requested))
 					snd_request_card(card);
-				}
 				snd_seq_device_load_drivers();
 			}
 		}

[PATCH 4.14 34/61] efi: capsule-loader: Fix use-after-free in efi_capsule_write

[Greg Kroah-Hartman]

From: Hyunwoo Kim <imv4bel@gmail.com>

commit 9cb636b5f6a8cc6d1b50809ec8f8d33ae0c84c95 upstream.

A race condition may occur if the user calls close() on another thread
during a write() operation on the device node of the efi capsule.

This is a race condition that occurs between the efi_capsule_write() and
efi_capsule_flush() functions of efi_capsule_fops, which ultimately
results in UAF.

So, the page freeing process is modified to be done in
efi_capsule_release() instead of efi_capsule_flush().

Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Link: https://lore.kernel.org/all/20220907102920.GA88602@ubuntu/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/firmware/efi/capsule-loader.c |   31 +++++++------------------------
 1 file changed, 7 insertions(+), 24 deletions(-)

--- a/drivers/firmware/efi/capsule-loader.c
+++ b/drivers/firmware/efi/capsule-loader.c
@@ -238,29 +238,6 @@ failed:
 }
 
 /**
- * efi_capsule_flush - called by file close or file flush
- * @file: file pointer
- * @id: not used
- *
- *	If a capsule is being partially uploaded then calling this function
- *	will be treated as upload termination and will free those completed
- *	buffer pages and -ECANCELED will be returned.
- **/
-static int efi_capsule_flush(struct file *file, fl_owner_t id)
-{
-	int ret = 0;
-	struct capsule_info *cap_info = file->private_data;
-
-	if (cap_info->index > 0) {
-		pr_err("capsule upload not complete\n");
-		efi_free_all_buff_pages(cap_info);
-		ret = -ECANCELED;
-	}
-
-	return ret;
-}
-
-/**
  * efi_capsule_release - called by file close
  * @inode: not used
  * @file: file pointer
@@ -272,6 +249,13 @@ static int efi_capsule_release(struct in
 {
 	struct capsule_info *cap_info = file->private_data;
 
+	if (cap_info->index > 0 &&
+	    (cap_info->header.headersize == 0 ||
+	     cap_info->count < cap_info->total_size)) {
+		pr_err("capsule upload not complete\n");
+		efi_free_all_buff_pages(cap_info);
+	}
+
 	kfree(cap_info->pages);
 	kfree(cap_info->phys);
 	kfree(file->private_data);
@@ -319,7 +303,6 @@ static const struct file_operations efi_
 	.owner = THIS_MODULE,
 	.open = efi_capsule_open,
 	.write = efi_capsule_write,
-	.flush = efi_capsule_flush,
 	.release = efi_capsule_release,
 	.llseek = no_llseek,
 };

[PATCH 4.14 35/61] wifi: iwlegacy: 4965: corrected fix for potential off-by-one overflow in il4965_rs_fill_link_cmd()

[Greg Kroah-Hartman]

From: Stanislaw Gruszka <stf_xl@wp.pl>

commit 6d0ef7241553f3553a0a2764c69b07892705924c upstream.

This reverts commit a8eb8e6f7159c7c20c0ddac428bde3d110890aa7 as
it can cause invalid link quality command sent to the firmware
and address the off-by-one issue by fixing condition of while loop.

Cc: stable@vger.kernel.org
Fixes: a8eb8e6f7159 ("wifi: iwlegacy: 4965: fix potential off-by-one overflow in il4965_rs_fill_link_cmd()")
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220815073737.GA999388@wp.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/intel/iwlegacy/4965-rs.c |    5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

--- a/drivers/net/wireless/intel/iwlegacy/4965-rs.c
+++ b/drivers/net/wireless/intel/iwlegacy/4965-rs.c
@@ -2424,7 +2424,7 @@ il4965_rs_fill_link_cmd(struct il_priv *
 		/* Repeat initial/next rate.
 		 * For legacy IL_NUMBER_TRY == 1, this loop will not execute.
 		 * For HT IL_HT_NUMBER_TRY == 3, this executes twice. */
-		while (repeat_rate > 0) {
+		while (repeat_rate > 0 && idx < (LINK_QUAL_MAX_RETRY_NUM - 1)) {
 			if (is_legacy(tbl_type.lq_type)) {
 				if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE)
 					ant_toggle_cnt++;
@@ -2443,8 +2443,6 @@ il4965_rs_fill_link_cmd(struct il_priv *
 			    cpu_to_le32(new_rate);
 			repeat_rate--;
 			idx++;
-			if (idx >= LINK_QUAL_MAX_RETRY_NUM)
-				goto out;
 		}
 
 		il4965_rs_get_tbl_info_from_mcs(new_rate, lq_sta->band,
@@ -2489,7 +2487,6 @@ il4965_rs_fill_link_cmd(struct il_priv *
 		repeat_rate--;
 	}
 
-out:
 	lq_cmd->agg_params.agg_frame_cnt_limit = LINK_QUAL_AGG_FRAME_LIMIT_DEF;
 	lq_cmd->agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF;
 

[PATCH 4.14 36/61] fs: only do a memory barrier for the first set_buffer_uptodate()

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 2f79cdfe58c13949bbbb65ba5926abfe9561d0ec upstream.

Commit d4252071b97d ("add barriers to buffer_uptodate and
set_buffer_uptodate") added proper memory barriers to the buffer head
BH_Uptodate bit, so that anybody who tests a buffer for being up-to-date
will be guaranteed to actually see initialized state.

However, that commit didn't _just_ add the memory barrier, it also ended
up dropping the "was it already set" logic that the BUFFER_FNS() macro
had.

That's conceptually the right thing for a generic "this is a memory
barrier" operation, but in the case of the buffer contents, we really
only care about the memory barrier for the _first_ time we set the bit,
in that the only memory ordering protection we need is to avoid anybody
seeing uninitialized memory contents.

Any other access ordering wouldn't be about the BH_Uptodate bit anyway,
and would require some other proper lock (typically BH_Lock or the folio
lock).  A reader that races with somebody invalidating the buffer head
isn't an issue wrt the memory ordering, it's a serialization issue.

Now, you'd think that the buffer head operations don't matter in this
day and age (and I certainly thought so), but apparently some loads
still end up being heavy users of buffer heads.  In particular, the
kernel test robot reported that not having this bit access optimization
in place caused a noticeable direct IO performance regression on ext4:

  fxmark.ssd_ext4_no_jnl_DWTL_54_directio.works/sec -26.5% regression

although you presumably need a fast disk and a lot of cores to actually
notice.

Link: https://lore.kernel.org/all/Yw8L7HTZ%2FdE2%2Fo9C@xsang-OptiPlex-9020/
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Fengwei Yin <fengwei.yin@intel.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/buffer_head.h |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/include/linux/buffer_head.h
+++ b/include/linux/buffer_head.h
@@ -134,6 +134,17 @@ BUFFER_FNS(Defer_Completion, defer_compl
 static __always_inline void set_buffer_uptodate(struct buffer_head *bh)
 {
 	/*
+	 * If somebody else already set this uptodate, they will
+	 * have done the memory barrier, and a reader will thus
+	 * see *some* valid buffer state.
+	 *
+	 * Any other serialization (with IO errors or whatever that
+	 * might clear the bit) has to come from other state (eg BH_Lock).
+	 */
+	if (test_bit(BH_Uptodate, &bh->b_state))
+		return;
+
+	/*
 	 * make it consistent with folio_mark_uptodate
 	 * pairs with smp_load_acquire in buffer_uptodate
 	 */

[PATCH 4.14 37/61] Revert "mm: kmemleak: take a full lowmem check in kmemleak_*_phys()"

[Greg Kroah-Hartman]

From: Yee Lee <yee.lee@mediatek.com>

This reverts commit 23c2d497de21f25898fbea70aeb292ab8acc8c94.

Commit 23c2d497de21 ("mm: kmemleak: take a full lowmem check in
kmemleak_*_phys()") brought false leak alarms on some archs like arm64
that does not init pfn boundary in early booting. The final solution
lands on linux-6.0: commit 0c24e061196c ("mm: kmemleak: add rbtree and
store physical address for objects allocated with PA").

Revert this commit before linux-6.0. The original issue of invalid PA
can be mitigated by additional check in devicetree.

The false alarm report is as following: Kmemleak output: (Qemu/arm64)
unreferenced object 0xffff0000c0170a00 (size 128):
  comm "swapper/0", pid 1, jiffies 4294892404 (age 126.208s)
  hex dump (first 32 bytes):
 62 61 73 65 00 00 00 00 00 00 00 00 00 00 00 00  base............
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<(____ptrval____)>] __kmalloc_track_caller+0x1b0/0x2e4
    [<(____ptrval____)>] kstrdup_const+0x8c/0xc4
    [<(____ptrval____)>] kvasprintf_const+0xbc/0xec
    [<(____ptrval____)>] kobject_set_name_vargs+0x58/0xe4
    [<(____ptrval____)>] kobject_add+0x84/0x100
    [<(____ptrval____)>] __of_attach_node_sysfs+0x78/0xec
    [<(____ptrval____)>] of_core_init+0x68/0x104
    [<(____ptrval____)>] driver_init+0x28/0x48
    [<(____ptrval____)>] do_basic_setup+0x14/0x28
    [<(____ptrval____)>] kernel_init_freeable+0x110/0x178
    [<(____ptrval____)>] kernel_init+0x20/0x1a0
    [<(____ptrval____)>] ret_from_fork+0x10/0x20

This pacth is also applicable to linux-5.17.y/linux-5.18.y/linux-5.19.y

Cc: <stable@vger.kernel.org>
Signed-off-by: Yee Lee <yee.lee@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/kmemleak.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -1192,7 +1192,7 @@ EXPORT_SYMBOL(kmemleak_no_scan);
 void __ref kmemleak_alloc_phys(phys_addr_t phys, size_t size, int min_count,
 			       gfp_t gfp)
 {
-	if (PHYS_PFN(phys) >= min_low_pfn && PHYS_PFN(phys) < max_low_pfn)
+	if (!IS_ENABLED(CONFIG_HIGHMEM) || PHYS_PFN(phys) < max_low_pfn)
 		kmemleak_alloc(__va(phys), size, min_count, gfp);
 }
 EXPORT_SYMBOL(kmemleak_alloc_phys);
@@ -1203,7 +1203,7 @@ EXPORT_SYMBOL(kmemleak_alloc_phys);
  */
 void __ref kmemleak_free_part_phys(phys_addr_t phys, size_t size)
 {
-	if (PHYS_PFN(phys) >= min_low_pfn && PHYS_PFN(phys) < max_low_pfn)
+	if (!IS_ENABLED(CONFIG_HIGHMEM) || PHYS_PFN(phys) < max_low_pfn)
 		kmemleak_free_part(__va(phys), size);
 }
 EXPORT_SYMBOL(kmemleak_free_part_phys);
@@ -1214,7 +1214,7 @@ EXPORT_SYMBOL(kmemleak_free_part_phys);
  */
 void __ref kmemleak_not_leak_phys(phys_addr_t phys)
 {
-	if (PHYS_PFN(phys) >= min_low_pfn && PHYS_PFN(phys) < max_low_pfn)
+	if (!IS_ENABLED(CONFIG_HIGHMEM) || PHYS_PFN(phys) < max_low_pfn)
 		kmemleak_not_leak(__va(phys));
 }
 EXPORT_SYMBOL(kmemleak_not_leak_phys);
@@ -1225,7 +1225,7 @@ EXPORT_SYMBOL(kmemleak_not_leak_phys);
  */
 void __ref kmemleak_ignore_phys(phys_addr_t phys)
 {
-	if (PHYS_PFN(phys) >= min_low_pfn && PHYS_PFN(phys) < max_low_pfn)
+	if (!IS_ENABLED(CONFIG_HIGHMEM) || PHYS_PFN(phys) < max_low_pfn)
 		kmemleak_ignore(__va(phys));
 }
 EXPORT_SYMBOL(kmemleak_ignore_phys);

[PATCH 4.14 38/61] drm/amdgpu: Check num_gfx_rings for gfx v9_0 rb setup.

[Greg Kroah-Hartman]

From: Candice Li <candice.li@amd.com>

[ Upstream commit c351938350ab9b5e978dede2c321da43de7eb70c ]

No need to set up rb when no gfx rings.

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index 53186c5e1066b..bb0d32b4be74d 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -1514,7 +1514,8 @@ static void gfx_v9_0_gpu_init(struct amdgpu_device *adev)
 
 	gfx_v9_0_tiling_mode_table_init(adev);
 
-	gfx_v9_0_setup_rb(adev);
+	if (adev->gfx.num_gfx_rings)
+		gfx_v9_0_setup_rb(adev);
 	gfx_v9_0_get_cu_info(adev, &adev->gfx.cu_info);
 
 	/* XXX SH_MEM regs */
-- 
2.35.1

[PATCH 4.14 39/61] drm/radeon: add a force flush to delay work when radeon

[Greg Kroah-Hartman]

From: Zhenneng Li <lizhenneng@kylinos.cn>

[ Upstream commit f461950fdc374a3ada5a63c669d997de4600dffe ]

Although radeon card fence and wait for gpu to finish processing current batch rings,
there is still a corner case that radeon lockup work queue may not be fully flushed,
and meanwhile the radeon_suspend_kms() function has called pci_set_power_state() to
put device in D3hot state.
Per PCI spec rev 4.0 on 5.3.1.4.1 D3hot State.
> Configuration and Message requests are the only TLPs accepted by a Function in
> the D3hot state. All other received Requests must be handled as Unsupported Requests,
> and all received Completions may optionally be handled as Unexpected Completions.
This issue will happen in following logs:
Unable to handle kernel paging request at virtual address 00008800e0008010
CPU 0 kworker/0:3(131): Oops 0
pc = [<ffffffff811bea5c>]  ra = [<ffffffff81240844>]  ps = 0000 Tainted: G        W
pc is at si_gpu_check_soft_reset+0x3c/0x240
ra is at si_dma_is_lockup+0x34/0xd0
v0 = 0000000000000000  t0 = fff08800e0008010  t1 = 0000000000010000
t2 = 0000000000008010  t3 = fff00007e3c00000  t4 = fff00007e3c00258
t5 = 000000000000ffff  t6 = 0000000000000001  t7 = fff00007ef078000
s0 = fff00007e3c016e8  s1 = fff00007e3c00000  s2 = fff00007e3c00018
s3 = fff00007e3c00000  s4 = fff00007fff59d80  s5 = 0000000000000000
s6 = fff00007ef07bd98
a0 = fff00007e3c00000  a1 = fff00007e3c016e8  a2 = 0000000000000008
a3 = 0000000000000001  a4 = 8f5c28f5c28f5c29  a5 = ffffffff810f4338
t8 = 0000000000000275  t9 = ffffffff809b66f8  t10 = ff6769c5d964b800
t11= 000000000000b886  pv = ffffffff811bea20  at = 0000000000000000
gp = ffffffff81d89690  sp = 00000000aa814126
Disabling lock debugging due to kernel taint
Trace:
[<ffffffff81240844>] si_dma_is_lockup+0x34/0xd0
[<ffffffff81119610>] radeon_fence_check_lockup+0xd0/0x290
[<ffffffff80977010>] process_one_work+0x280/0x550
[<ffffffff80977350>] worker_thread+0x70/0x7c0
[<ffffffff80977410>] worker_thread+0x130/0x7c0
[<ffffffff80982040>] kthread+0x200/0x210
[<ffffffff809772e0>] worker_thread+0x0/0x7c0
[<ffffffff80981f8c>] kthread+0x14c/0x210
[<ffffffff80911658>] ret_from_kernel_thread+0x18/0x20
[<ffffffff80981e40>] kthread+0x0/0x210
 Code: ad3e0008  43f0074a  ad7e0018  ad9e0020  8c3001e8  40230101
 <88210000> 4821ed21
So force lockup work queue flush to fix this problem.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Zhenneng Li <lizhenneng@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/radeon_device.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index 58488eac84627..906547b229a9a 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -1655,6 +1655,9 @@ int radeon_suspend_kms(struct drm_device *dev, bool suspend,
 		if (r) {
 			/* delay GPU reset to resume */
 			radeon_fence_driver_force_completion(rdev, i);
+		} else {
+			/* finish executing delayed work */
+			flush_delayed_work(&rdev->fence_drv[i].lockup_work);
 		}
 	}
 
-- 
2.35.1

[PATCH 4.14 40/61] parisc: ccio-dma: Handle kmalloc failure in ccio_init_resources()

[Greg Kroah-Hartman]

From: Li Qiong <liqiong@nfschina.com>

[ Upstream commit d46c742f827fa2326ab1f4faa1cccadb56912341 ]

As the possible failure of the kmalloc(), it should be better
to fix this error path, check and return '-ENOMEM' error code.

Signed-off-by: Li Qiong <liqiong@nfschina.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/parisc/ccio-dma.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
index 224a364097672..cc23b30337c16 100644
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -1416,15 +1416,17 @@ ccio_init_resource(struct resource *res, char *name, void __iomem *ioaddr)
 	}
 }
 
-static void __init ccio_init_resources(struct ioc *ioc)
+static int __init ccio_init_resources(struct ioc *ioc)
 {
 	struct resource *res = ioc->mmio_region;
 	char *name = kmalloc(14, GFP_KERNEL);
-
+	if (unlikely(!name))
+		return -ENOMEM;
 	snprintf(name, 14, "GSC Bus [%d/]", ioc->hw_path);
 
 	ccio_init_resource(res, name, &ioc->ioc_regs->io_io_low);
 	ccio_init_resource(res + 1, name, &ioc->ioc_regs->io_io_low_hv);
+	return 0;
 }
 
 static int new_ioc_area(struct resource *res, unsigned long size,
@@ -1578,7 +1580,10 @@ static int __init ccio_probe(struct parisc_device *dev)
 		return -ENOMEM;
 	}
 	ccio_ioc_init(ioc);
-	ccio_init_resources(ioc);
+	if (ccio_init_resources(ioc)) {
+		kfree(ioc);
+		return -ENOMEM;
+	}
 	hppa_dma_ops = &ccio_ops;
 	dev->dev.platform_data = kzalloc(sizeof(struct pci_hba_data), GFP_KERNEL);
 
-- 
2.35.1

[PATCH 4.14 41/61] parisc: Add runtime check to prevent PA2.0 kernels on PA1.x machines

[Greg Kroah-Hartman]

From: Helge Deller <deller@gmx.de>

[ Upstream commit 591d2108f3abc4db9f9073cae37cf3591fd250d6 ]

If a 32-bit kernel was compiled for PA2.0 CPUs, it won't be able to run
on machines with PA1.x CPUs. Add a check and bail out early if a PA1.x
machine is detected.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/parisc/kernel/head.S | 43 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 42 insertions(+), 1 deletion(-)

diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S
index 9b99eb0712ad1..2f570a5205866 100644
--- a/arch/parisc/kernel/head.S
+++ b/arch/parisc/kernel/head.S
@@ -22,7 +22,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
-	.level	PA_ASM_LEVEL
+	.level	1.1
 
 	__INITDATA
 ENTRY(boot_args)
@@ -69,6 +69,47 @@ $bss_loop:
 	stw,ma          %arg2,4(%r1)
 	stw,ma          %arg3,4(%r1)
 
+#if !defined(CONFIG_64BIT) && defined(CONFIG_PA20)
+	/* This 32-bit kernel was compiled for PA2.0 CPUs. Check current CPU
+	 * and halt kernel if we detect a PA1.x CPU. */
+	ldi		32,%r10
+	mtctl		%r10,%cr11
+	.level 2.0
+	mfctl,w		%cr11,%r10
+	.level 1.1
+	comib,<>,n	0,%r10,$cpu_ok
+
+	load32		PA(msg1),%arg0
+	ldi		msg1_end-msg1,%arg1
+$iodc_panic:
+	copy		%arg0, %r10
+	copy		%arg1, %r11
+	load32		PA(init_stack),%sp
+#define MEM_CONS 0x3A0
+	ldw		MEM_CONS+32(%r0),%arg0	// HPA
+	ldi		ENTRY_IO_COUT,%arg1
+	ldw		MEM_CONS+36(%r0),%arg2	// SPA
+	ldw		MEM_CONS+8(%r0),%arg3	// layers
+	load32		PA(__bss_start),%r1
+	stw		%r1,-52(%sp)		// arg4
+	stw		%r0,-56(%sp)		// arg5
+	stw		%r10,-60(%sp)		// arg6 = ptr to text
+	stw		%r11,-64(%sp)		// arg7 = len
+	stw		%r0,-68(%sp)		// arg8
+	load32		PA(.iodc_panic_ret), %rp
+	ldw		MEM_CONS+40(%r0),%r1	// ENTRY_IODC
+	bv,n		(%r1)
+.iodc_panic_ret:
+	b .				/* wait endless with ... */
+	or		%r10,%r10,%r10	/* qemu idle sleep */
+msg1:	.ascii "Can't boot kernel which was built for PA8x00 CPUs on this machine.\r\n"
+msg1_end:
+
+$cpu_ok:
+#endif
+
+	.level	PA_ASM_LEVEL
+
 	/* Initialize startup VM. Just map first 16/32 MB of memory */
 	load32		PA(swapper_pg_dir),%r4
 	mtctl		%r4,%cr24	/* Initialize kernel root pointer */
-- 
2.35.1

[PATCH 4.14 42/61] arm64/signal: Raise limit on stack frames

[Greg Kroah-Hartman]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit 7ddcaf78e93c9282b4d92184f511b4d5bee75355 ]

The signal code has a limit of 64K on the size of a stack frame that it
will generate, if this limit is exceeded then a process will be killed if
it receives a signal. Unfortunately with the advent of SME this limit is
too small - the maximum possible size of the ZA register alone is 64K. This
is not an issue for practical systems at present but is easily seen using
virtual platforms.

Raise the limit to 256K, this is substantially more than could be used by
any current architecture extension.

Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220817182324.638214-2-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/signal.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index 43442b3a463f5..1b3973de417ec 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -97,7 +97,7 @@ static size_t sigframe_size(struct rt_sigframe_user_layout const *user)
  * not taken into account.  This limit is not a guarantee and is
  * NOT ABI.
  */
-#define SIGFRAME_MAXSZ SZ_64K
+#define SIGFRAME_MAXSZ SZ_256K
 
 static int __sigframe_alloc(struct rt_sigframe_user_layout *user,
 			    unsigned long *offset, size_t size, bool extend)
-- 
2.35.1

[PATCH 4.14 43/61] fbdev: chipsfb: Add missing pci_disable_device() in chipsfb_pci_init()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 07c55c9803dea748d17a054000cbf1913ce06399 ]

Add missing pci_disable_device() in error path in chipsfb_pci_init().

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/chipsfb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/fbdev/chipsfb.c b/drivers/video/fbdev/chipsfb.c
index 413b465e69d8e..7ca149ab86d20 100644
--- a/drivers/video/fbdev/chipsfb.c
+++ b/drivers/video/fbdev/chipsfb.c
@@ -432,6 +432,7 @@ static int chipsfb_pci_init(struct pci_dev *dp, const struct pci_device_id *ent)
  err_release_fb:
 	framebuffer_release(p);
  err_disable:
+	pci_disable_device(dp);
  err_out:
 	return rc;
 }
-- 
2.35.1

[PATCH 4.14 44/61] ALSA: emu10k1: Fix out of bounds access in snd_emu10k1_pcm_channel_alloc()

[Greg Kroah-Hartman]

From: Tasos Sahanidis <tasos@tasossah.com>

commit d29f59051d3a07b81281b2df2b8c9dfe4716067f upstream.

The voice allocator sometimes begins allocating from near the end of the
array and then wraps around, however snd_emu10k1_pcm_channel_alloc()
accesses the newly allocated voices as if it never wrapped around.

This results in out of bounds access if the first voice has a high enough
index so that first_voice + requested_voice_count > NUM_G (64).
The more voices are requested, the more likely it is for this to occur.

This was initially discovered using PipeWire, however it can be reproduced
by calling aplay multiple times with 16 channels:
aplay -r 48000 -D plughw:CARD=Live,DEV=3 -c 16 /dev/zero

UBSAN: array-index-out-of-bounds in sound/pci/emu10k1/emupcm.c:127:40
index 65 is out of range for type 'snd_emu10k1_voice [64]'
CPU: 1 PID: 31977 Comm: aplay Tainted: G        W IOE      6.0.0-rc2-emu10k1+ #7
Hardware name: ASUSTEK COMPUTER INC P5W DH Deluxe/P5W DH Deluxe, BIOS 3002    07/22/2010
Call Trace:
<TASK>
dump_stack_lvl+0x49/0x63
dump_stack+0x10/0x16
ubsan_epilogue+0x9/0x3f
__ubsan_handle_out_of_bounds.cold+0x44/0x49
snd_emu10k1_playback_hw_params+0x3bc/0x420 [snd_emu10k1]
snd_pcm_hw_params+0x29f/0x600 [snd_pcm]
snd_pcm_common_ioctl+0x188/0x1410 [snd_pcm]
? exit_to_user_mode_prepare+0x35/0x170
? do_syscall_64+0x69/0x90
? syscall_exit_to_user_mode+0x26/0x50
? do_syscall_64+0x69/0x90
? exit_to_user_mode_prepare+0x35/0x170
snd_pcm_ioctl+0x27/0x40 [snd_pcm]
__x64_sys_ioctl+0x95/0xd0
do_syscall_64+0x5c/0x90
? do_syscall_64+0x69/0x90
? do_syscall_64+0x69/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/3707dcab-320a-62ff-63c0-73fc201ef756@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/emu10k1/emupcm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/pci/emu10k1/emupcm.c
+++ b/sound/pci/emu10k1/emupcm.c
@@ -137,7 +137,7 @@ static int snd_emu10k1_pcm_channel_alloc
 	epcm->voices[0]->epcm = epcm;
 	if (voices > 1) {
 		for (i = 1; i < voices; i++) {
-			epcm->voices[i] = &epcm->emu->voices[epcm->voices[0]->number + i];
+			epcm->voices[i] = &epcm->emu->voices[(epcm->voices[0]->number + i) % NUM_G];
 			epcm->voices[i]->epcm = epcm;
 		}
 	}

[PATCH 4.14 45/61] ALSA: aloop: Fix random zeros in capture data when using jiffies timer

[Greg Kroah-Hartman]

From: Pattara Teerapong <pteerapong@chromium.org>

commit 3e48940abee88b8dbbeeaf8a07e7b2b6be1271b3 upstream.

In loopback_jiffies_timer_pos_update(), we are getting jiffies twice.
First time for playback, second time for capture. Jiffies can be updated
between these two calls and if the capture jiffies is larger, extra zeros
will be filled in the capture buffer.

Change to get jiffies once and use it for both playback and capture.

Signed-off-by: Pattara Teerapong <pteerapong@chromium.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220901144036.4049060-1-pteerapong@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/drivers/aloop.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/sound/drivers/aloop.c
+++ b/sound/drivers/aloop.c
@@ -477,17 +477,18 @@ static unsigned int loopback_pos_update(
 			cable->streams[SNDRV_PCM_STREAM_PLAYBACK];
 	struct loopback_pcm *dpcm_capt =
 			cable->streams[SNDRV_PCM_STREAM_CAPTURE];
-	unsigned long delta_play = 0, delta_capt = 0;
+	unsigned long delta_play = 0, delta_capt = 0, cur_jiffies;
 	unsigned int running, count1, count2;
 
+	cur_jiffies = jiffies;
 	running = cable->running ^ cable->pause;
 	if (running & (1 << SNDRV_PCM_STREAM_PLAYBACK)) {
-		delta_play = jiffies - dpcm_play->last_jiffies;
+		delta_play = cur_jiffies - dpcm_play->last_jiffies;
 		dpcm_play->last_jiffies += delta_play;
 	}
 
 	if (running & (1 << SNDRV_PCM_STREAM_CAPTURE)) {
-		delta_capt = jiffies - dpcm_capt->last_jiffies;
+		delta_capt = cur_jiffies - dpcm_capt->last_jiffies;
 		dpcm_capt->last_jiffies += delta_capt;
 	}
 

[PATCH 4.14 46/61] ALSA: usb-audio: Fix an out-of-bounds bug in __snd_usb_parse_audio_interface()

[Greg Kroah-Hartman]

From: Dongxiang Ke <kdx.glider@gmail.com>

commit e53f47f6c1a56d2af728909f1cb894da6b43d9bf upstream.

There may be a bad USB audio device with a USB ID of (0x04fa, 0x4201) and
the number of it's interfaces less than 4, an out-of-bounds read bug occurs
when parsing the interface descriptor for this device.

Fix this by checking the number of interfaces.

Signed-off-by: Dongxiang Ke <kdx.glider@gmail.com>
Link: https://lore.kernel.org/r/20220906024928.10951-1-kdx.glider@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/stream.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/usb/stream.c
+++ b/sound/usb/stream.c
@@ -502,7 +502,7 @@ int snd_usb_parse_audio_interface(struct
 	 * Dallas DS4201 workaround: It presents 5 altsettings, but the last
 	 * one misses syncpipe, and does not produce any sound.
 	 */
-	if (chip->usb_id == USB_ID(0x04fa, 0x4201))
+	if (chip->usb_id == USB_ID(0x04fa, 0x4201) && num >= 4)
 		num = 4;
 
 	for (i = 0; i < num; i++) {

[PATCH 4.14 47/61] kprobes: Prohibit probes in gate area

[Greg Kroah-Hartman]

From: Christian A. Ehrhardt <lk@c--e.de>

commit 1efda38d6f9ba26ac88b359c6277f1172db03f1e upstream.

The system call gate area counts as kernel text but trying
to install a kprobe in this area fails with an Oops later on.
To fix this explicitly disallow the gate area for kprobes.

Found by syzkaller with the following reproducer:
perf_event_open$cgroup(&(0x7f00000001c0)={0x6, 0x80, 0x0, 0x0, 0x0, 0x0, 0x80ffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, @perf_config_ext={0x0, 0xffffffffff600000}}, 0xffffffffffffffff, 0x0, 0xffffffffffffffff, 0x0)

Sample report:
BUG: unable to handle page fault for address: fffffbfff3ac6000
PGD 6dfcb067 P4D 6dfcb067 PUD 6df8f067 PMD 6de4d067 PTE 0
Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 PID: 21978 Comm: syz-executor.2 Not tainted 6.0.0-rc3-00363-g7726d4c3e60b-dirty #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:__insn_get_emulate_prefix arch/x86/lib/insn.c:91 [inline]
RIP: 0010:insn_get_emulate_prefix arch/x86/lib/insn.c:106 [inline]
RIP: 0010:insn_get_prefixes.part.0+0xa8/0x1110 arch/x86/lib/insn.c:134
Code: 49 be 00 00 00 00 00 fc ff df 48 8b 40 60 48 89 44 24 08 e9 81 00 00 00 e8 e5 4b 39 ff 4c 89 fa 4c 89 f9 48 c1 ea 03 83 e1 07 <42> 0f b6 14 32 38 ca 7f 08 84 d2 0f 85 06 10 00 00 48 89 d8 48 89
RSP: 0018:ffffc900088bf860 EFLAGS: 00010246
RAX: 0000000000040000 RBX: ffffffff9b9bebc0 RCX: 0000000000000000
RDX: 1ffffffff3ac6000 RSI: ffffc90002d82000 RDI: ffffc900088bf9e8
RBP: ffffffff9d630001 R08: 0000000000000000 R09: ffffc900088bf9e8
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001
R13: ffffffff9d630000 R14: dffffc0000000000 R15: ffffffff9d630000
FS:  00007f63eef63640(0000) GS:ffff88806d000000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffbfff3ac6000 CR3: 0000000029d90005 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
 <TASK>
 insn_get_prefixes arch/x86/lib/insn.c:131 [inline]
 insn_get_opcode arch/x86/lib/insn.c:272 [inline]
 insn_get_modrm+0x64a/0x7b0 arch/x86/lib/insn.c:343
 insn_get_sib+0x29a/0x330 arch/x86/lib/insn.c:421
 insn_get_displacement+0x350/0x6b0 arch/x86/lib/insn.c:464
 insn_get_immediate arch/x86/lib/insn.c:632 [inline]
 insn_get_length arch/x86/lib/insn.c:707 [inline]
 insn_decode+0x43a/0x490 arch/x86/lib/insn.c:747
 can_probe+0xfc/0x1d0 arch/x86/kernel/kprobes/core.c:282
 arch_prepare_kprobe+0x79/0x1c0 arch/x86/kernel/kprobes/core.c:739
 prepare_kprobe kernel/kprobes.c:1160 [inline]
 register_kprobe kernel/kprobes.c:1641 [inline]
 register_kprobe+0xb6e/0x1690 kernel/kprobes.c:1603
 __register_trace_kprobe kernel/trace/trace_kprobe.c:509 [inline]
 __register_trace_kprobe+0x26a/0x2d0 kernel/trace/trace_kprobe.c:477
 create_local_trace_kprobe+0x1f7/0x350 kernel/trace/trace_kprobe.c:1833
 perf_kprobe_init+0x18c/0x280 kernel/trace/trace_event_perf.c:271
 perf_kprobe_event_init+0xf8/0x1c0 kernel/events/core.c:9888
 perf_try_init_event+0x12d/0x570 kernel/events/core.c:11261
 perf_init_event kernel/events/core.c:11325 [inline]
 perf_event_alloc.part.0+0xf7f/0x36a0 kernel/events/core.c:11619
 perf_event_alloc kernel/events/core.c:12059 [inline]
 __do_sys_perf_event_open+0x4a8/0x2a00 kernel/events/core.c:12157
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f63ef7efaed
Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f63eef63028 EFLAGS: 00000246 ORIG_RAX: 000000000000012a
RAX: ffffffffffffffda RBX: 00007f63ef90ff80 RCX: 00007f63ef7efaed
RDX: 0000000000000000 RSI: ffffffffffffffff RDI: 00000000200001c0
RBP: 00007f63ef86019c R08: 0000000000000000 R09: 0000000000000000
R10: ffffffffffffffff R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000002 R14: 00007f63ef90ff80 R15: 00007f63eef43000
 </TASK>
Modules linked in:
CR2: fffffbfff3ac6000
---[ end trace 0000000000000000 ]---
RIP: 0010:__insn_get_emulate_prefix arch/x86/lib/insn.c:91 [inline]
RIP: 0010:insn_get_emulate_prefix arch/x86/lib/insn.c:106 [inline]
RIP: 0010:insn_get_prefixes.part.0+0xa8/0x1110 arch/x86/lib/insn.c:134
Code: 49 be 00 00 00 00 00 fc ff df 48 8b 40 60 48 89 44 24 08 e9 81 00 00 00 e8 e5 4b 39 ff 4c 89 fa 4c 89 f9 48 c1 ea 03 83 e1 07 <42> 0f b6 14 32 38 ca 7f 08 84 d2 0f 85 06 10 00 00 48 89 d8 48 89
RSP: 0018:ffffc900088bf860 EFLAGS: 00010246
RAX: 0000000000040000 RBX: ffffffff9b9bebc0 RCX: 0000000000000000
RDX: 1ffffffff3ac6000 RSI: ffffc90002d82000 RDI: ffffc900088bf9e8
RBP: ffffffff9d630001 R08: 0000000000000000 R09: ffffc900088bf9e8
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001
R13: ffffffff9d630000 R14: dffffc0000000000 R15: ffffffff9d630000
FS:  00007f63eef63640(0000) GS:ffff88806d000000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffbfff3ac6000 CR3: 0000000029d90005 CR4: 0000000000770ef0
PKRU: 55555554
==================================================================

Link: https://lkml.kernel.org/r/20220907200917.654103-1-lk@c--e.de

cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
cc: "David S. Miller" <davem@davemloft.net>
Cc: stable@vger.kernel.org
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/kprobes.c |    1 +
 1 file changed, 1 insertion(+)

--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -1553,6 +1553,7 @@ static int check_kprobe_address_safe(str
 	/* Ensure it is not in reserved area nor out of text */
 	if (!(core_kernel_text((unsigned long) p->addr) ||
 	    is_module_text_address((unsigned long) p->addr)) ||
+	    in_gate_area_no_mm((unsigned long) p->addr) ||
 	    within_kprobe_blacklist((unsigned long) p->addr) ||
 	    jump_label_text_reserved(p->addr, p->addr) ||
 	    find_bug((unsigned long)p->addr)) {

[PATCH 4.14 48/61] scsi: mpt3sas: Fix use-after-free warning

[Greg Kroah-Hartman]

From: Sreekanth Reddy <sreekanth.reddy@broadcom.com>

commit 991df3dd5144f2e6b1c38b8d20ed3d4d21e20b34 upstream.

Fix the following use-after-free warning which is observed during
controller reset:

refcount_t: underflow; use-after-free.
WARNING: CPU: 23 PID: 5399 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0

Link: https://lore.kernel.org/r/20220906134908.1039-2-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/mpt3sas/mpt3sas_scsih.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -2804,6 +2804,7 @@ static struct fw_event_work *dequeue_nex
 		fw_event = list_first_entry(&ioc->fw_event_list,
 				struct fw_event_work, list);
 		list_del_init(&fw_event->list);
+		fw_event_work_put(fw_event);
 	}
 	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
 
@@ -2840,7 +2841,6 @@ _scsih_fw_event_cleanup_queue(struct MPT
 		if (cancel_work_sync(&fw_event->work))
 			fw_event_work_put(fw_event);
 
-		fw_event_work_put(fw_event);
 	}
 }
 

[PATCH 4.14 49/61] driver core: Dont probe devices after bus_type.match() probe deferral

[Greg Kroah-Hartman]

From: Isaac J. Manjarres <isaacmanjarres@google.com>

commit 25e9fbf0fd38868a429feabc38abebfc6dbf6542 upstream.

Both __device_attach_driver() and __driver_attach() check the return
code of the bus_type.match() function to see if the device needs to be
added to the deferred probe list. After adding the device to the list,
the logic attempts to bind the device to the driver anyway, as if the
device had matched with the driver, which is not correct.

If __device_attach_driver() detects that the device in question is not
ready to match with a driver on the bus, then it doesn't make sense for
the device to attempt to bind with the current driver or continue
attempting to match with any of the other drivers on the bus. So, update
the logic in __device_attach_driver() to reflect this.

If __driver_attach() detects that a driver tried to match with a device
that is not ready to match yet, then the driver should not attempt to bind
with the device. However, the driver can still attempt to match and bind
with other devices on the bus, as drivers can be bound to multiple
devices. So, update the logic in __driver_attach() to reflect this.

Fixes: 656b8035b0ee ("ARM: 8524/1: driver cohandle -EPROBE_DEFER from bus_type.match()")
Cc: stable@vger.kernel.org
Cc: Saravana Kannan <saravanak@google.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Link: https://lore.kernel.org/r/20220817184026.3468620-1-isaacmanjarres@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/base/dd.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -632,6 +632,11 @@ static int __device_attach_driver(struct
 	} else if (ret == -EPROBE_DEFER) {
 		dev_dbg(dev, "Device match requests probe deferral\n");
 		driver_deferred_probe_add(dev);
+		/*
+		 * Device can't match with a driver right now, so don't attempt
+		 * to match or bind with other drivers on the bus.
+		 */
+		return ret;
 	} else if (ret < 0) {
 		dev_dbg(dev, "Bus failed to match device: %d", ret);
 		return ret;
@@ -774,6 +779,11 @@ static int __driver_attach(struct device
 	} else if (ret == -EPROBE_DEFER) {
 		dev_dbg(dev, "Device match requests probe deferral\n");
 		driver_deferred_probe_add(dev);
+		/*
+		 * Driver could not match with device, but may match with
+		 * another device on the bus.
+		 */
+		return 0;
 	} else if (ret < 0) {
 		dev_dbg(dev, "Bus failed to match device: %d", ret);
 		return ret;

[PATCH 4.14 50/61] netfilter: br_netfilter: Drop dst references before setting.

[Greg Kroah-Hartman]

From: Harsh Modi <harshmodi@google.com>

[ Upstream commit d047283a7034140ea5da759a494fd2274affdd46 ]

The IPv6 path already drops dst in the daddr changed case, but the IPv4
path does not. This change makes the two code paths consistent.

Further, it is possible that there is already a metadata_dst allocated from
ingress that might already be attached to skbuff->dst while following
the bridge path. If it is not released before setting a new
metadata_dst, it will be leaked. This is similar to what is done in
bpf_set_tunnel_key() or ip6_route_input().

It is important to note that the memory being leaked is not the dst
being set in the bridge code, but rather memory allocated from some
other code path that is not being freed correctly before the skb dst is
overwritten.

An example of the leakage fixed by this commit found using kmemleak:

unreferenced object 0xffff888010112b00 (size 256):
  comm "softirq", pid 0, jiffies 4294762496 (age 32.012s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 80 16 f1 83 ff ff ff ff  ................
    e1 4e f6 82 ff ff ff ff 00 00 00 00 00 00 00 00  .N..............
  backtrace:
    [<00000000d79567ea>] metadata_dst_alloc+0x1b/0xe0
    [<00000000be113e13>] udp_tun_rx_dst+0x174/0x1f0
    [<00000000a36848f4>] geneve_udp_encap_recv+0x350/0x7b0
    [<00000000d4afb476>] udp_queue_rcv_one_skb+0x380/0x560
    [<00000000ac064aea>] udp_unicast_rcv_skb+0x75/0x90
    [<000000009a8ee8c5>] ip_protocol_deliver_rcu+0xd8/0x230
    [<00000000ef4980bb>] ip_local_deliver_finish+0x7a/0xa0
    [<00000000d7533c8c>] __netif_receive_skb_one_core+0x89/0xa0
    [<00000000a879497d>] process_backlog+0x93/0x190
    [<00000000e41ade9f>] __napi_poll+0x28/0x170
    [<00000000b4c0906b>] net_rx_action+0x14f/0x2a0
    [<00000000b20dd5d4>] __do_softirq+0xf4/0x305
    [<000000003a7d7e15>] __irq_exit_rcu+0xc3/0x140
    [<00000000968d39a2>] sysvec_apic_timer_interrupt+0x9e/0xc0
    [<000000009e920794>] asm_sysvec_apic_timer_interrupt+0x16/0x20
    [<000000008942add0>] native_safe_halt+0x13/0x20

Florian Westphal says: "Original code was likely fine because nothing
ever did set a skb->dst entry earlier than bridge in those days."

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Harsh Modi <harshmodi@google.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bridge/br_netfilter_hooks.c | 2 ++
 net/bridge/br_netfilter_ipv6.c  | 1 +
 2 files changed, 3 insertions(+)

diff --git a/net/bridge/br_netfilter_hooks.c b/net/bridge/br_netfilter_hooks.c
index ee7a03ff89f3a..d229bfaaaba72 100644
--- a/net/bridge/br_netfilter_hooks.c
+++ b/net/bridge/br_netfilter_hooks.c
@@ -382,6 +382,7 @@ static int br_nf_pre_routing_finish(struct net *net, struct sock *sk, struct sk_
 				/* - Bridged-and-DNAT'ed traffic doesn't
 				 *   require ip_forwarding. */
 				if (rt->dst.dev == dev) {
+					skb_dst_drop(skb);
 					skb_dst_set(skb, &rt->dst);
 					goto bridged_dnat;
 				}
@@ -411,6 +412,7 @@ static int br_nf_pre_routing_finish(struct net *net, struct sock *sk, struct sk_
 			kfree_skb(skb);
 			return 0;
 		}
+		skb_dst_drop(skb);
 		skb_dst_set_noref(skb, &rt->dst);
 	}
 
diff --git a/net/bridge/br_netfilter_ipv6.c b/net/bridge/br_netfilter_ipv6.c
index 09d5e0c7b3ba4..995d86777e7cb 100644
--- a/net/bridge/br_netfilter_ipv6.c
+++ b/net/bridge/br_netfilter_ipv6.c
@@ -201,6 +201,7 @@ static int br_nf_pre_routing_finish_ipv6(struct net *net, struct sock *sk, struc
 			kfree_skb(skb);
 			return 0;
 		}
+		skb_dst_drop(skb);
 		skb_dst_set_noref(skb, &rt->dst);
 	}
 
-- 
2.35.1

[PATCH 4.14 51/61] netfilter: nf_conntrack_irc: Fix forged IP logic

[Greg Kroah-Hartman]

From: David Leadbeater <dgl@dgl.cx>

[ Upstream commit 0efe125cfb99e6773a7434f3463f7c2fa28f3a43 ]

Ensure the match happens in the right direction, previously the
destination used was the server, not the NAT host, as the comment
shows the code intended.

Additionally nf_nat_irc uses port 0 as a signal and there's no valid way
it can appear in a DCC message, so consider port 0 also forged.

Fixes: 869f37d8e48f ("[NETFILTER]: nf_conntrack/nf_nat: add IRC helper port")
Signed-off-by: David Leadbeater <dgl@dgl.cx>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conntrack_irc.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/net/netfilter/nf_conntrack_irc.c b/net/netfilter/nf_conntrack_irc.c
index 5523acce9d699..814220f7be676 100644
--- a/net/netfilter/nf_conntrack_irc.c
+++ b/net/netfilter/nf_conntrack_irc.c
@@ -187,8 +187,9 @@ static int help(struct sk_buff *skb, unsigned int protoff,
 
 			/* dcc_ip can be the internal OR external (NAT'ed) IP */
 			tuple = &ct->tuplehash[dir].tuple;
-			if (tuple->src.u3.ip != dcc_ip &&
-			    tuple->dst.u3.ip != dcc_ip) {
+			if ((tuple->src.u3.ip != dcc_ip &&
+			     ct->tuplehash[!dir].tuple.dst.u3.ip != dcc_ip) ||
+			    dcc_port == 0) {
 				net_warn_ratelimited("Forged DCC command from %pI4: %pI4:%u\n",
 						     &tuple->src.u3.ip,
 						     &dcc_ip, dcc_port);
-- 
2.35.1

[PATCH 4.14 52/61] sch_sfb: Dont assume the skb is still around after enqueueing to child

[Greg Kroah-Hartman]

From: Toke Høiland-Jørgensen <toke@toke.dk>

[ Upstream commit 9efd23297cca530bb35e1848665805d3fcdd7889 ]

The sch_sfb enqueue() routine assumes the skb is still alive after it has
been enqueued into a child qdisc, using the data in the skb cb field in the
increment_qlen() routine after enqueue. However, the skb may in fact have
been freed, causing a use-after-free in this case. In particular, this
happens if sch_cake is used as a child of sfb, and the GSO splitting mode
of CAKE is enabled (in which case the skb will be split into segments and
the original skb freed).

Fix this by copying the sfb cb data to the stack before enqueueing the skb,
and using this stack copy in increment_qlen() instead of the skb pointer
itself.

Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-18231
Fixes: e13e02a3c68d ("net_sched: SFB flow scheduler")
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/sch_sfb.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/net/sched/sch_sfb.c b/net/sched/sch_sfb.c
index 04f15e0aeaa8b..8f924defa98d0 100644
--- a/net/sched/sch_sfb.c
+++ b/net/sched/sch_sfb.c
@@ -139,15 +139,15 @@ static void increment_one_qlen(u32 sfbhash, u32 slot, struct sfb_sched_data *q)
 	}
 }
 
-static void increment_qlen(const struct sk_buff *skb, struct sfb_sched_data *q)
+static void increment_qlen(const struct sfb_skb_cb *cb, struct sfb_sched_data *q)
 {
 	u32 sfbhash;
 
-	sfbhash = sfb_hash(skb, 0);
+	sfbhash = cb->hashes[0];
 	if (sfbhash)
 		increment_one_qlen(sfbhash, 0, q);
 
-	sfbhash = sfb_hash(skb, 1);
+	sfbhash = cb->hashes[1];
 	if (sfbhash)
 		increment_one_qlen(sfbhash, 1, q);
 }
@@ -286,6 +286,7 @@ static int sfb_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 	struct sfb_sched_data *q = qdisc_priv(sch);
 	struct Qdisc *child = q->qdisc;
 	struct tcf_proto *fl;
+	struct sfb_skb_cb cb;
 	int i;
 	u32 p_min = ~0;
 	u32 minqlen = ~0;
@@ -402,11 +403,12 @@ static int sfb_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 	}
 
 enqueue:
+	memcpy(&cb, sfb_skb_cb(skb), sizeof(cb));
 	ret = qdisc_enqueue(skb, child, to_free);
 	if (likely(ret == NET_XMIT_SUCCESS)) {
 		qdisc_qstats_backlog_inc(sch, skb);
 		sch->q.qlen++;
-		increment_qlen(skb, q);
+		increment_qlen(&cb, q);
 	} else if (net_xmit_drop_count(ret)) {
 		q->stats.childdrop++;
 		qdisc_qstats_drop(sch);
-- 
2.35.1

[PATCH 4.14 53/61] tipc: fix shift wrapping bug in map_get()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit e2b224abd9bf45dcb55750479fc35970725a430b ]

There is a shift wrapping bug in this code so anything thing above
31 will return false.

Fixes: 35c55c9877f8 ("tipc: add neighbor monitoring framework")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/tipc/monitor.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/tipc/monitor.c b/net/tipc/monitor.c
index c6496da9392d7..cf6dd3546c53c 100644
--- a/net/tipc/monitor.c
+++ b/net/tipc/monitor.c
@@ -130,7 +130,7 @@ static void map_set(u64 *up_map, int i, unsigned int v)
 
 static int map_get(u64 up_map, int i)
 {
-	return (up_map & (1 << i)) >> i;
+	return (up_map & (1ULL << i)) >> i;
 }
 
 static struct tipc_peer *peer_prev(struct tipc_peer *peer)
-- 
2.35.1

[PATCH 4.14 54/61] ipv6: sr: fix out-of-bounds read when setting HMAC data.

[Greg Kroah-Hartman]

From: David Lebrun <dlebrun@google.com>

[ Upstream commit 84a53580c5d2138c7361c7c3eea5b31827e63b35 ]

The SRv6 layer allows defining HMAC data that can later be used to sign IPv6
Segment Routing Headers. This configuration is realised via netlink through
four attributes: SEG6_ATTR_HMACKEYID, SEG6_ATTR_SECRET, SEG6_ATTR_SECRETLEN and
SEG6_ATTR_ALGID. Because the SECRETLEN attribute is decoupled from the actual
length of the SECRET attribute, it is possible to provide invalid combinations
(e.g., secret = "", secretlen = 64). This case is not checked in the code and
with an appropriately crafted netlink message, an out-of-bounds read of up
to 64 bytes (max secret length) can occur past the skb end pointer and into
skb_shared_info:

Breakpoint 1, seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208
208		memcpy(hinfo->secret, secret, slen);
(gdb) bt
 #0  seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208
 #1  0xffffffff81e012e9 in genl_family_rcv_msg_doit (skb=skb@entry=0xffff88800b1f9f00, nlh=nlh@entry=0xffff88800b1b7600,
    extack=extack@entry=0xffffc90000ba7af0, ops=ops@entry=0xffffc90000ba7a80, hdrlen=4, net=0xffffffff84237580 <init_net>, family=<optimized out>,
    family=<optimized out>) at net/netlink/genetlink.c:731
 #2  0xffffffff81e01435 in genl_family_rcv_msg (extack=0xffffc90000ba7af0, nlh=0xffff88800b1b7600, skb=0xffff88800b1f9f00,
    family=0xffffffff82fef6c0 <seg6_genl_family>) at net/netlink/genetlink.c:775
 #3  genl_rcv_msg (skb=0xffff88800b1f9f00, nlh=0xffff88800b1b7600, extack=0xffffc90000ba7af0) at net/netlink/genetlink.c:792
 #4  0xffffffff81dfffc3 in netlink_rcv_skb (skb=skb@entry=0xffff88800b1f9f00, cb=cb@entry=0xffffffff81e01350 <genl_rcv_msg>)
    at net/netlink/af_netlink.c:2501
 #5  0xffffffff81e00919 in genl_rcv (skb=0xffff88800b1f9f00) at net/netlink/genetlink.c:803
 #6  0xffffffff81dff6ae in netlink_unicast_kernel (ssk=0xffff888010eec800, skb=0xffff88800b1f9f00, sk=0xffff888004aed000)
    at net/netlink/af_netlink.c:1319
 #7  netlink_unicast (ssk=ssk@entry=0xffff888010eec800, skb=skb@entry=0xffff88800b1f9f00, portid=portid@entry=0, nonblock=<optimized out>)
    at net/netlink/af_netlink.c:1345
 #8  0xffffffff81dff9a4 in netlink_sendmsg (sock=<optimized out>, msg=0xffffc90000ba7e48, len=<optimized out>) at net/netlink/af_netlink.c:1921
...
(gdb) p/x ((struct sk_buff *)0xffff88800b1f9f00)->head + ((struct sk_buff *)0xffff88800b1f9f00)->end
$1 = 0xffff88800b1b76c0
(gdb) p/x secret
$2 = 0xffff88800b1b76c0
(gdb) p slen
$3 = 64 '@'

The OOB data can then be read back from userspace by dumping HMAC state. This
commit fixes this by ensuring SECRETLEN cannot exceed the actual length of
SECRET.

Reported-by: Lucas Leong <wmliang.tw@gmail.com>
Tested: verified that EINVAL is correctly returned when secretlen > len(secret)
Fixes: 4f4853dc1c9c1 ("ipv6: sr: implement API to control SR HMAC structure")
Signed-off-by: David Lebrun <dlebrun@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/seg6.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/net/ipv6/seg6.c b/net/ipv6/seg6.c
index fdeb90dd1c824..9c45165fe79bb 100644
--- a/net/ipv6/seg6.c
+++ b/net/ipv6/seg6.c
@@ -129,6 +129,11 @@ static int seg6_genl_sethmac(struct sk_buff *skb, struct genl_info *info)
 		goto out_unlock;
 	}
 
+	if (slen > nla_len(info->attrs[SEG6_ATTR_SECRET])) {
+		err = -EINVAL;
+		goto out_unlock;
+	}
+
 	if (hinfo) {
 		err = seg6_hmac_info_del(net, hmackeyid);
 		if (err)
-- 
2.35.1

[PATCH 4.14 55/61] tcp: fix early ETIMEDOUT after spurious non-SACK RTO

[Greg Kroah-Hartman]

From: Neal Cardwell <ncardwell@google.com>

[ Upstream commit 686dc2db2a0fdc1d34b424ec2c0a735becd8d62b ]

Fix a bug reported and analyzed by Nagaraj Arankal, where the handling
of a spurious non-SACK RTO could cause a connection to fail to clear
retrans_stamp, causing a later RTO to very prematurely time out the
connection with ETIMEDOUT.

Here is the buggy scenario, expanding upon Nagaraj Arankal's excellent
report:

(*1) Send one data packet on a non-SACK connection

(*2) Because no ACK packet is received, the packet is retransmitted
     and we enter CA_Loss; but this retransmission is spurious.

(*3) The ACK for the original data is received. The transmitted packet
     is acknowledged.  The TCP timestamp is before the retrans_stamp,
     so tcp_may_undo() returns true, and tcp_try_undo_loss() returns
     true without changing state to Open (because tcp_is_sack() is
     false), and tcp_process_loss() returns without calling
     tcp_try_undo_recovery().  Normally after undoing a CA_Loss
     episode, tcp_fastretrans_alert() would see that the connection
     has returned to CA_Open and fall through and call
     tcp_try_to_open(), which would set retrans_stamp to 0.  However,
     for non-SACK connections we hold the connection in CA_Loss, so do
     not fall through to call tcp_try_to_open() and do not set
     retrans_stamp to 0. So retrans_stamp is (erroneously) still
     non-zero.

     At this point the first "retransmission event" has passed and
     been recovered from. Any future retransmission is a completely
     new "event". However, retrans_stamp is erroneously still
     set. (And we are still in CA_Loss, which is correct.)

(*4) After 16 minutes (to correspond with tcp_retries2=15), a new data
     packet is sent. Note: No data is transmitted between (*3) and
     (*4) and we disabled keep alives.

     The socket's timeout SHOULD be calculated from this point in
     time, but instead it's calculated from the prior "event" 16
     minutes ago (step (*2)).

(*5) Because no ACK packet is received, the packet is retransmitted.

(*6) At the time of the 2nd retransmission, the socket returns
     ETIMEDOUT, prematurely, because retrans_stamp is (erroneously)
     too far in the past (set at the time of (*2)).

This commit fixes this bug by ensuring that we reuse in
tcp_try_undo_loss() the same careful logic for non-SACK connections
that we have in tcp_try_undo_recovery(). To avoid duplicating logic,
we factor out that logic into a new
tcp_is_non_sack_preventing_reopen() helper and call that helper from
both undo functions.

Fixes: da34ac7626b5 ("tcp: only undo on partial ACKs in CA_Loss")
Reported-by: Nagaraj Arankal <nagaraj.p.arankal@hpe.com>
Link: https://lore.kernel.org/all/SJ0PR84MB1847BE6C24D274C46A1B9B0EB27A9@SJ0PR84MB1847.NAMPRD84.PROD.OUTLOOK.COM/
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220903121023.866900-1-ncardwell.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp_input.c | 25 ++++++++++++++++++-------
 1 file changed, 18 insertions(+), 7 deletions(-)

diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 906d26794d007..c6d49ec38a56a 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -2425,6 +2425,21 @@ static inline bool tcp_may_undo(const struct tcp_sock *tp)
 	return tp->undo_marker && (!tp->undo_retrans || tcp_packet_delayed(tp));
 }
 
+static bool tcp_is_non_sack_preventing_reopen(struct sock *sk)
+{
+	struct tcp_sock *tp = tcp_sk(sk);
+
+	if (tp->snd_una == tp->high_seq && tcp_is_reno(tp)) {
+		/* Hold old state until something *above* high_seq
+		 * is ACKed. For Reno it is MUST to prevent false
+		 * fast retransmits (RFC2582). SACK TCP is safe. */
+		if (!tcp_any_retrans_done(sk))
+			tp->retrans_stamp = 0;
+		return true;
+	}
+	return false;
+}
+
 /* People celebrate: "We love our President!" */
 static bool tcp_try_undo_recovery(struct sock *sk)
 {
@@ -2445,14 +2460,8 @@ static bool tcp_try_undo_recovery(struct sock *sk)
 
 		NET_INC_STATS(sock_net(sk), mib_idx);
 	}
-	if (tp->snd_una == tp->high_seq && tcp_is_reno(tp)) {
-		/* Hold old state until something *above* high_seq
-		 * is ACKed. For Reno it is MUST to prevent false
-		 * fast retransmits (RFC2582). SACK TCP is safe. */
-		if (!tcp_any_retrans_done(sk))
-			tp->retrans_stamp = 0;
+	if (tcp_is_non_sack_preventing_reopen(sk))
 		return true;
-	}
 	tcp_set_ca_state(sk, TCP_CA_Open);
 	tp->is_sack_reneg = 0;
 	return false;
@@ -2486,6 +2495,8 @@ static bool tcp_try_undo_loss(struct sock *sk, bool frto_undo)
 			NET_INC_STATS(sock_net(sk),
 					LINUX_MIB_TCPSPURIOUSRTOS);
 		inet_csk(sk)->icsk_retransmits = 0;
+		if (tcp_is_non_sack_preventing_reopen(sk))
+			return true;
 		if (frto_undo || tcp_is_sack(tp)) {
 			tcp_set_ca_state(sk, TCP_CA_Open);
 			tp->is_sack_reneg = 0;
-- 
2.35.1

[PATCH 4.14 56/61] sch_sfb: Also store skb len before calling child enqueue

[Greg Kroah-Hartman]

From: Toke Høiland-Jørgensen <toke@toke.dk>

[ Upstream commit 2f09707d0c972120bf794cfe0f0c67e2c2ddb252 ]

Cong Wang noticed that the previous fix for sch_sfb accessing the queued
skb after enqueueing it to a child qdisc was incomplete: the SFB enqueue
function was also calling qdisc_qstats_backlog_inc() after enqueue, which
reads the pkt len from the skb cb field. Fix this by also storing the skb
len, and using the stored value to increment the backlog after enqueueing.

Fixes: 9efd23297cca ("sch_sfb: Don't assume the skb is still around after enqueueing to child")
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20220905192137.965549-1-toke@toke.dk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/sch_sfb.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/sched/sch_sfb.c b/net/sched/sch_sfb.c
index 8f924defa98d0..9962a49989938 100644
--- a/net/sched/sch_sfb.c
+++ b/net/sched/sch_sfb.c
@@ -284,6 +284,7 @@ static int sfb_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 {
 
 	struct sfb_sched_data *q = qdisc_priv(sch);
+	unsigned int len = qdisc_pkt_len(skb);
 	struct Qdisc *child = q->qdisc;
 	struct tcf_proto *fl;
 	struct sfb_skb_cb cb;
@@ -406,7 +407,7 @@ static int sfb_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 	memcpy(&cb, sfb_skb_cb(skb), sizeof(cb));
 	ret = qdisc_enqueue(skb, child, to_free);
 	if (likely(ret == NET_XMIT_SUCCESS)) {
-		qdisc_qstats_backlog_inc(sch, skb);
+		sch->qstats.backlog += len;
 		sch->q.qlen++;
 		increment_qlen(&cb, q);
 	} else if (net_xmit_drop_count(ret)) {
-- 
2.35.1

[PATCH 4.14 57/61] usb: dwc3: fix PHY disable sequence

[Greg Kroah-Hartman]

From: Johan Hovold <johan+linaro@kernel.org>

commit d2ac7bef95c9ead307801ccb6cb6dfbeb14247bf upstream.

Generic PHYs must be powered-off before they can be tore down.

Similarly, suspending legacy PHYs after having powered them off makes no
sense.

Fix the dwc3_core_exit() (e.g. called during suspend) and open-coded
dwc3_probe() error-path sequences that got this wrong.

Note that this makes dwc3_core_exit() match the dwc3_core_init() error
path with respect to powering off the PHYs.

Fixes: 03c1fd622f72 ("usb: dwc3: core: add phy cleanup for probe error handling")
Fixes: c499ff71ff2a ("usb: dwc3: core: re-factor init and exit paths")
Cc: stable@vger.kernel.org      # 4.8
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220804151001.23612-2-johan+linaro@kernel.org
[ johan: adjust context to 4.14 ]
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/core.c |   20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -656,15 +656,15 @@ static void dwc3_core_exit(struct dwc3 *
 {
 	dwc3_event_buffers_cleanup(dwc);
 
-	usb_phy_shutdown(dwc->usb2_phy);
-	usb_phy_shutdown(dwc->usb3_phy);
-	phy_exit(dwc->usb2_generic_phy);
-	phy_exit(dwc->usb3_generic_phy);
-
 	usb_phy_set_suspend(dwc->usb2_phy, 1);
 	usb_phy_set_suspend(dwc->usb3_phy, 1);
 	phy_power_off(dwc->usb2_generic_phy);
 	phy_power_off(dwc->usb3_generic_phy);
+
+	usb_phy_shutdown(dwc->usb2_phy);
+	usb_phy_shutdown(dwc->usb3_phy);
+	phy_exit(dwc->usb2_generic_phy);
+	phy_exit(dwc->usb3_generic_phy);
 }
 
 static bool dwc3_core_is_valid(struct dwc3 *dwc)
@@ -1288,16 +1288,16 @@ static int dwc3_probe(struct platform_de
 err5:
 	dwc3_event_buffers_cleanup(dwc);
 
-	usb_phy_shutdown(dwc->usb2_phy);
-	usb_phy_shutdown(dwc->usb3_phy);
-	phy_exit(dwc->usb2_generic_phy);
-	phy_exit(dwc->usb3_generic_phy);
-
 	usb_phy_set_suspend(dwc->usb2_phy, 1);
 	usb_phy_set_suspend(dwc->usb3_phy, 1);
 	phy_power_off(dwc->usb2_generic_phy);
 	phy_power_off(dwc->usb3_generic_phy);
 
+	usb_phy_shutdown(dwc->usb2_phy);
+	usb_phy_shutdown(dwc->usb3_phy);
+	phy_exit(dwc->usb2_generic_phy);
+	phy_exit(dwc->usb3_generic_phy);
+
 	dwc3_ulpi_exit(dwc);
 
 err4:

[PATCH 4.14 58/61] USB: serial: ch341: fix lost character on LCR updates

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 8e83622ae7ca481c76c8fd9579877f6abae64ca2 upstream.

Disable LCR updates for pre-0x30 devices which use a different (unknown)
protocol for line control and where the current register write causes
the next received character to be lost.

Note that updating LCR using the INIT command has no effect on these
devices either.

Reported-by: Jonathan Woithe <jwoithe@just42.net>
Tested-by: Jonathan Woithe <jwoithe@just42.net>
Link: https://lore.kernel.org/r/Ys1iPTfiZRWj2gXs@marvin.atrad.com.au
Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration")
Fixes: 55fa15b5987d ("USB: serial: ch341: fix baud rate and line-control handling")
Cc: stable@vger.kernel.org      # 4.10
Signed-off-by: Johan Hovold <johan@kernel.org>
[ johan: adjust context to 4.19 ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/ch341.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -99,6 +99,8 @@ struct ch341_private {
 	u8 mcr;
 	u8 msr;
 	u8 lcr;
+
+	u8 version;
 };
 
 static void ch341_set_termios(struct tty_struct *tty,
@@ -184,6 +186,9 @@ static int ch341_set_baudrate_lcr(struct
 	if (r)
 		return r;
 
+	if (priv->version < 0x30)
+		return 0;
+
 	r = ch341_control_out(dev, CH341_REQ_WRITE_REG, 0x2518, lcr);
 	if (r)
 		return r;
@@ -235,7 +240,9 @@ static int ch341_configure(struct usb_de
 	r = ch341_control_in(dev, CH341_REQ_READ_VERSION, 0, 0, buffer, size);
 	if (r < 0)
 		goto out;
-	dev_dbg(&dev->dev, "Chip version: 0x%02x\n", buffer[0]);
+
+	priv->version = buffer[0];
+	dev_dbg(&dev->dev, "Chip version: 0x%02x\n", priv->version);
 
 	r = ch341_control_out(dev, CH341_REQ_SERIAL_INIT, 0, 0);
 	if (r < 0)

[PATCH 4.14 59/61] USB: serial: ch341: fix disabled rx timer on older devices

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 41ca302a697b64a3dab4676e01d0d11bb184737d upstream.

At least one older CH341 appears to have the RX timer enable bit
inverted so that setting it disables the RX timer and prevents the FIFO
from emptying until it is full.

Only set the RX timer enable bit for devices with version newer than
0x27 (even though this probably affects all pre-0x30 devices).

Reported-by: Jonathan Woithe <jwoithe@just42.net>
Tested-by: Jonathan Woithe <jwoithe@just42.net>
Link: https://lore.kernel.org/r/Ys1iPTfiZRWj2gXs@marvin.atrad.com.au
Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration")
Cc: stable@vger.kernel.org      # 4.10
Signed-off-by: Johan Hovold <johan@kernel.org>
[ johan: backport to 5.4 ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/ch341.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -179,8 +179,12 @@ static int ch341_set_baudrate_lcr(struct
 	/*
 	 * CH341A buffers data until a full endpoint-size packet (32 bytes)
 	 * has been received unless bit 7 is set.
+	 *
+	 * At least one device with version 0x27 appears to have this bit
+	 * inverted.
 	 */
-	a |= BIT(7);
+	if (priv->version > 0x27)
+		a |= BIT(7);
 
 	r = ch341_control_out(dev, CH341_REQ_WRITE_REG, 0x1312, a);
 	if (r)

[PATCH 4.14 60/61] MIPS: loongson32: ls1c: Fix hang during startup

[Greg Kroah-Hartman]

From: Yang Ling <gnaygnil@gmail.com>

[ Upstream commit 35508d2424097f9b6a1a17aac94f702767035616 ]

The RTCCTRL reg of LS1C is obselete.
Writing this reg will cause system hang.

Fixes: 60219c563c9b6 ("MIPS: Add RTC support for Loongson1C board")
Signed-off-by: Yang Ling <gnaygnil@gmail.com>
Tested-by: Keguang Zhang <keguang.zhang@gmail.com>
Acked-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/loongson32/ls1c/board.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/mips/loongson32/ls1c/board.c b/arch/mips/loongson32/ls1c/board.c
index eb2d913c694fd..2d9675a6782c3 100644
--- a/arch/mips/loongson32/ls1c/board.c
+++ b/arch/mips/loongson32/ls1c/board.c
@@ -19,7 +19,6 @@ static struct platform_device *ls1c_platform_devices[] __initdata = {
 static int __init ls1c_platform_init(void)
 {
 	ls1x_serial_set_uartclk(&ls1x_uart_pdev);
-	ls1x_rtc_set_extclk(&ls1x_rtc_pdev);
 
 	return platform_add_devices(ls1c_platform_devices,
 				   ARRAY_SIZE(ls1c_platform_devices));
-- 
2.35.1

[PATCH 4.14 61/61] SUNRPC: use _bh spinlocking on ->transport_lock

[Greg Kroah-Hartman]

From: "NeilBrown" <neilb@suse.de>

Prior to Linux 5.3, ->transport_lock in sunrpc required the _bh style
spinlocks (when not called from a bottom-half handler).

When upstream 3848e96edf4788f772d83990022fa7023a233d83 was backported to
stable kernels, the spin_lock/unlock calls should have been changed to
the _bh version, but this wasn't noted in the patch and didn't happen.

So convert these lock/unlock calls to the _bh versions.

This patch is required for any stable kernel prior to 5.3 to which the
above mentioned patch was backported.  Namely 4.9.y, 4.14.y, 4.19.y.

Signed-off-by: NeilBrown <neilb@suse.de>
Reported-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
---
 net/sunrpc/xprt.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -1525,9 +1525,9 @@ static void xprt_destroy(struct rpc_xprt
 	 * is cleared.  We use ->transport_lock to ensure the mod_timer()
 	 * can only run *before* del_time_sync(), never after.
 	 */
-	spin_lock(&xprt->transport_lock);
+	spin_lock_bh(&xprt->transport_lock);
 	del_timer_sync(&xprt->timer);
-	spin_unlock(&xprt->transport_lock);
+	spin_unlock_bh(&xprt->transport_lock);
 
 	/*
 	 * Destroy sockets etc from the system workqueue so they can

Re: [PATCH 4.14 00/61] 4.14.293-rc1 review

[Naresh Kamboju]

On Tue, 13 Sept 2022 at 20:04, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.14.293 release.
> There are 61 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 15 Sep 2022 14:03:27 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.293-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro's test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 4.14.293-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-4.14.y
* git commit: 20f32db14e38e76b2820affe8a16ca9f48c7933d
* git describe: v4.14.292-62-g20f32db14e38
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.14.y/build/v4.14.292-62-g20f32db14e38

## No test Regressions (compared to v4.14.292)

## No metric Regressions (compared to v4.14.292)

## No test Fixes (compared to v4.14.292)

## No metric Fixes (compared to v4.14.292)

## Test result summary
total: 65342, pass: 57030, fail: 537, skip: 7392, xfail: 383

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 313 total, 308 passed, 5 failed
* arm64: 53 total, 50 passed, 3 failed
* i386: 29 total, 28 passed, 1 failed
* mips: 41 total, 41 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 20 total, 19 passed, 1 failed
* s390: 15 total, 11 passed, 4 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x86_64: 51 total, 50 passed, 1 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kunit
* kvm-unit-tests
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-open-posix-tests
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* packetdrill
* rcutorture
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.14 00/61] 4.14.293-rc1 review

[Jon Hunter]

On Tue, 13 Sep 2022 16:07:02 +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.293 release.
> There are 61 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 15 Sep 2022 14:03:27 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.293-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v4.14:
    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    32 tests:	32 pass, 0 fail

Linux version:	4.14.293-rc1-g348b7ac1445f
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 4.14 00/61] 4.14.293-rc1 review

[Guenter Roeck]

On Tue, Sep 13, 2022 at 04:07:02PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.293 release.
> There are 61 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 15 Sep 2022 14:03:27 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 170 pass: 170 fail: 0
Qemu test results:
	total: 422 pass: 422 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter