[PATCH 5.19 00/48] 5.19.15-rc1 review

[PATCH 5.19 00/48] 5.19.15-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.19.15 release.
There are 48 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 12 Oct 2022 07:03:19 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.19.15-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.19.15-rc1

Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
    Bluetooth: use hdev->workqueue when queuing hdev->{cmd,ncmd}_timer works

Jules Irenge <jbi.octave@gmail.com>
    bpf: Fix resetting logic for unreferenced kptrs

Daniel Golle <daniel@makrotopia.org>
    net: ethernet: mtk_eth_soc: fix state in __mtk_foe_entry_clear

Kumar Kartikeya Dwivedi <memxor@gmail.com>
    bpf: Gate dynptr API behind CAP_BPF

Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
    rpmsg: qcom: glink: replace strncpy() with strscpy_pad()

Brian Norris <briannorris@chromium.org>
    mmc: core: Terminate infinite loop in SD-UHS voltage switch

ChanWoo Lee <cw9316.lee@samsung.com>
    mmc: core: Replace with already defined values for readability

Mario Limonciello <mario.limonciello@amd.com>
    gpiolib: acpi: Add a quirk for Asus UM325UAZ

Mario Limonciello <mario.limonciello@amd.com>
    gpiolib: acpi: Add support to ignore programming an interrupt

Johan Hovold <johan@kernel.org>
    USB: serial: ftdi_sio: fix 300 bps rate for SIO

Tadeusz Struk <tadeusz.struk@linaro.org>
    usb: mon: make mmapped memory read only

Zhang Qilong <zhangqilong3@huawei.com>
    i2c: davinci: fix PM disable depth imbalance in davinci_i2c_probe

Al Viro <viro@zeniv.linux.org.uk>
    don't use __kernel_write() on kmap_local_page()

Kan Liang <kan.liang@linux.intel.com>
    perf/x86/intel: Fix unchecked MSR access error for Alder Lake N

Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
    drm/amd/display: increase dcn315 pstate change latency

Cruise Hung <Cruise.Hung@amd.com>
    drm/amd/display: Fix DP MST timeslot issue when fallback happened

zhikzhai <zhikai.zhai@amd.com>
    drm/amd/display: skip audio setup when audio stream is enabled

Hugo Hu <hugo.hu@amd.com>
    drm/amd/display: update gamut remap if plane has changed

Michael Strauss <michael.strauss@amd.com>
    drm/amd/display: Assume an LTTPR is always present on fixed_vs links

Leo Li <sunpeng.li@amd.com>
    drm/amd/display: Fix double cursor on non-video RGB MPO

Janis Schoetterl-Glausch <scgl@linux.ibm.com>
    KVM: s390: Pass initialized arg even if unused

Jianglei Nie <niejianglei2021@163.com>
    net: atlantic: fix potential memory leak in aq_ndev_close()

David Gow <davidgow@google.com>
    arch: um: Mark the stack non-executable to fix a binutils warning

Linus Walleij <linus.walleij@linaro.org>
    gpio: ftgpio010: Make irqchip immutable

Lukas Straub <lukasstraub2@web.de>
    um: Cleanup compiler warning in arch/x86/um/tls_32.c

Lukas Straub <lukasstraub2@web.de>
    um: Cleanup syscall_handler_t cast in syscalls_32.h

Jaroslav Kysela <perex@perex.cz>
    ALSA: hda/hdmi: Fix the converter reuse for the silent stream

Oleksandr Mazur <oleksandr.mazur@plvision.eu>
    net: marvell: prestera: add support for for Aldrin2

Haimin Zhang <tcs.kernel@gmail.com>
    net/ieee802154: fix uninit value bug in dgram_sendmsg

Letu Ren <fantasquex@gmail.com>
    scsi: qedf: Fix a UAF bug in __qedf_probe()

Yifan Zhang <yifan1.zhang@amd.com>
    drm/amdgpu/mes: zero the sdma_hqd_mask of 2nd SDMA engine for SDMA 6.0.1

Sergei Antonov <saproj@gmail.com>
    ARM: dts: fix Moxa SDIO 'compatible', remove 'sdhci' misnomer

Jason A. Donenfeld <Jason@zx2c4.com>
    wifi: iwlwifi: don't spam logs with NSS>2 messages

Swati Agarwal <swati.agarwal@xilinx.com>
    dmaengine: xilinx_dma: Report error in case of dma_set_mask_and_coherent API failure

Swati Agarwal <swati.agarwal@xilinx.com>
    dmaengine: xilinx_dma: cleanup for fetching xlnx,num-fstores property

Swati Agarwal <swati.agarwal@xilinx.com>
    dmaengine: xilinx_dma: Fix devm_platform_ioremap_resource error handling

Frank Wunderlich <frank-w@public-files.de>
    arm64: dts: rockchip: fix upper usb port on BPI-R2-Pro

Cristian Marussi <cristian.marussi@arm.com>
    firmware: arm_scmi: Add SCMI PM driver remove routine

Cristian Marussi <cristian.marussi@arm.com>
    firmware: arm_scmi: Harden accesses to the sensor domains

Cristian Marussi <cristian.marussi@arm.com>
    firmware: arm_scmi: Improve checks in the info_get operations

Dongliang Mu <mudongliangabcd@gmail.com>
    fs: fix UAF/GPF bug in nilfs_mdt_destroy

Mikulas Patocka <mpatocka@redhat.com>
    provide arch_test_bit_acquire for architectures that define test_bit

Mikulas Patocka <mpatocka@redhat.com>
    wait_on_bit: add an acquire memory barrier

Jalal Mostafa <jalal.a.mostapha@gmail.com>
    xsk: Inherit need_wakeup flag for shared sockets

Shuah Khan <skhan@linuxfoundation.org>
    docs: update mediator information in CoC docs

Kees Cook <keescook@chromium.org>
    hardening: Remove Clang's enable flag for -ftrivial-auto-var-init=zero

Sami Tolvanen <samitolvanen@google.com>
    Makefile.extrawarn: Move -Wcast-function-type-strict to W=1

Bart Van Assche <bvanassche@acm.org>
    sparc: Unbreak the build


-------------

Diffstat:

 .../devicetree/bindings/dma/moxa,moxart-dma.txt    |  4 +--
 .../process/code-of-conduct-interpretation.rst     |  2 +-
 Makefile                                           |  8 ++---
 arch/alpha/include/asm/bitops.h                    |  7 ++++
 arch/arm/boot/dts/moxart-uc7112lx.dts              |  2 +-
 arch/arm/boot/dts/moxart.dtsi                      |  4 +--
 arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts |  2 +-
 arch/hexagon/include/asm/bitops.h                  | 15 ++++++++
 arch/ia64/include/asm/bitops.h                     |  7 ++++
 arch/m68k/include/asm/bitops.h                     |  6 ++++
 arch/s390/include/asm/bitops.h                     |  7 ++++
 arch/s390/kvm/gaccess.c                            | 16 +++++++--
 arch/sh/include/asm/bitops-op32.h                  |  7 ++++
 arch/sparc/include/asm/smp_32.h                    | 15 ++++----
 arch/sparc/kernel/leon_smp.c                       | 12 ++++---
 arch/sparc/kernel/sun4d_smp.c                      | 12 ++++---
 arch/sparc/kernel/sun4m_smp.c                      | 10 +++---
 arch/sparc/mm/srmmu.c                              | 29 +++++++--------
 arch/um/Makefile                                   |  8 +++++
 arch/x86/events/intel/core.c                       | 40 ++++++++++++++++++++-
 arch/x86/events/intel/ds.c                         |  9 +++--
 arch/x86/events/perf_event.h                       |  2 ++
 arch/x86/include/asm/bitops.h                      | 21 +++++++++++
 arch/x86/um/shared/sysdep/syscalls_32.h            |  5 ++-
 arch/x86/um/tls_32.c                               |  6 ----
 arch/x86/um/vdso/Makefile                          |  2 +-
 drivers/dma/xilinx/xilinx_dma.c                    | 21 ++++++-----
 drivers/firmware/arm_scmi/clock.c                  |  6 +++-
 drivers/firmware/arm_scmi/scmi_pm_domain.c         | 20 +++++++++++
 drivers/firmware/arm_scmi/sensors.c                | 25 ++++++++++---
 drivers/gpio/gpio-ftgpio010.c                      | 22 +++++++-----
 drivers/gpio/gpiolib-acpi.c                        | 38 +++++++++++++++++---
 drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c            |  3 ++
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c  | 12 +++++--
 .../amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c | 22 +++++++-----
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c   | 16 ++++++++-
 .../amd/display/dc/dce110/dce110_hw_sequencer.c    |  6 ++--
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c |  1 +
 drivers/i2c/busses/i2c-davinci.c                   |  3 +-
 drivers/mmc/core/sd.c                              |  3 +-
 drivers/net/ethernet/aquantia/atlantic/aq_main.c   |  3 --
 .../net/ethernet/marvell/prestera/prestera_pci.c   |  1 +
 drivers/net/ethernet/mediatek/mtk_ppe.c            |  2 +-
 drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c  |  4 +--
 drivers/rpmsg/qcom_glink_native.c                  |  2 +-
 drivers/rpmsg/qcom_smd.c                           |  4 +--
 drivers/scsi/qedf/qedf_main.c                      |  5 ---
 drivers/usb/mon/mon_bin.c                          |  5 +++
 drivers/usb/serial/ftdi_sio.c                      |  3 +-
 fs/coredump.c                                      | 38 +++++++++++++++++---
 fs/inode.c                                         |  7 ++--
 fs/internal.h                                      |  3 ++
 fs/read_write.c                                    | 22 +++++++-----
 .../asm-generic/bitops/instrumented-non-atomic.h   | 12 +++++++
 include/asm-generic/bitops/non-atomic.h            | 14 ++++++++
 include/linux/buffer_head.h                        |  2 +-
 include/linux/scmi_protocol.h                      |  4 +--
 include/linux/wait_bit.h                           |  8 ++---
 include/net/ieee802154_netdev.h                    | 37 +++++++++++++++++++
 include/net/xsk_buff_pool.h                        |  2 +-
 kernel/bpf/helpers.c                               | 28 +++++++--------
 kernel/bpf/syscall.c                               |  2 +-
 kernel/sched/wait_bit.c                            |  2 +-
 net/bluetooth/hci_core.c                           | 15 ++++++--
 net/bluetooth/hci_event.c                          |  6 ++--
 net/ieee802154/socket.c                            | 42 ++++++++++++----------
 net/xdp/xsk.c                                      |  4 +--
 net/xdp/xsk_buff_pool.c                            |  5 +--
 scripts/Makefile.extrawarn                         |  1 +
 security/Kconfig.hardening                         | 14 +++++---
 sound/pci/hda/patch_hdmi.c                         |  1 +
 71 files changed, 559 insertions(+), 195 deletions(-)

[PATCH 5.19 01/48] sparc: Unbreak the build

[Greg Kroah-Hartman]

From: Bart Van Assche <bvanassche@acm.org>

commit 17006e86a7641fa3c50324cfb602f0e74dac8527 upstream.

Fix the following build errors:

arch/sparc/mm/srmmu.c: In function ‘smp_flush_page_for_dma’:
arch/sparc/mm/srmmu.c:1639:13: error: cast between incompatible function types from ‘void (*)(long unsigned int)’ to ‘void (*)(long unsigned int,  long unsigned int,  long unsigned int,  long unsigned int,  long unsigned int)’ [-Werror=cast-function-type]
 1639 |         xc1((smpfunc_t) local_ops->page_for_dma, page);
      |             ^
arch/sparc/mm/srmmu.c: In function ‘smp_flush_cache_mm’:
arch/sparc/mm/srmmu.c:1662:29: error: cast between incompatible function types from ‘void (*)(struct mm_struct *)’ to ‘void (*)(long unsigned int,  long unsigned int,  long unsigned int,  long unsigned int,  long unsigned int)’ [-Werror=cast-function-type]
 1662 |                         xc1((smpfunc_t) local_ops->cache_mm, (unsigned long) mm);
      |
[ ... ]

Compile-tested only.

Fixes: 552a23a0e5d0 ("Makefile: Enable -Wcast-function-type")
Cc: stable@vger.kernel.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220830205854.1918026-1-bvanassche@acm.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/sparc/include/asm/smp_32.h |   15 ++++++---------
 arch/sparc/kernel/leon_smp.c    |   12 +++++++-----
 arch/sparc/kernel/sun4d_smp.c   |   12 +++++++-----
 arch/sparc/kernel/sun4m_smp.c   |   10 ++++++----
 arch/sparc/mm/srmmu.c           |   29 +++++++++++++----------------
 5 files changed, 39 insertions(+), 39 deletions(-)

--- a/arch/sparc/include/asm/smp_32.h
+++ b/arch/sparc/include/asm/smp_32.h
@@ -33,9 +33,6 @@ extern volatile unsigned long cpu_callin
 extern cpumask_t smp_commenced_mask;
 extern struct linux_prom_registers smp_penguin_ctable;
 
-typedef void (*smpfunc_t)(unsigned long, unsigned long, unsigned long,
-		       unsigned long, unsigned long);
-
 void cpu_panic(void);
 
 /*
@@ -57,7 +54,7 @@ void smp_bogo(struct seq_file *);
 void smp_info(struct seq_file *);
 
 struct sparc32_ipi_ops {
-	void (*cross_call)(smpfunc_t func, cpumask_t mask, unsigned long arg1,
+	void (*cross_call)(void *func, cpumask_t mask, unsigned long arg1,
 			   unsigned long arg2, unsigned long arg3,
 			   unsigned long arg4);
 	void (*resched)(int cpu);
@@ -66,28 +63,28 @@ struct sparc32_ipi_ops {
 };
 extern const struct sparc32_ipi_ops *sparc32_ipi_ops;
 
-static inline void xc0(smpfunc_t func)
+static inline void xc0(void *func)
 {
 	sparc32_ipi_ops->cross_call(func, *cpu_online_mask, 0, 0, 0, 0);
 }
 
-static inline void xc1(smpfunc_t func, unsigned long arg1)
+static inline void xc1(void *func, unsigned long arg1)
 {
 	sparc32_ipi_ops->cross_call(func, *cpu_online_mask, arg1, 0, 0, 0);
 }
-static inline void xc2(smpfunc_t func, unsigned long arg1, unsigned long arg2)
+static inline void xc2(void *func, unsigned long arg1, unsigned long arg2)
 {
 	sparc32_ipi_ops->cross_call(func, *cpu_online_mask, arg1, arg2, 0, 0);
 }
 
-static inline void xc3(smpfunc_t func, unsigned long arg1, unsigned long arg2,
+static inline void xc3(void *func, unsigned long arg1, unsigned long arg2,
 		       unsigned long arg3)
 {
 	sparc32_ipi_ops->cross_call(func, *cpu_online_mask,
 				    arg1, arg2, arg3, 0);
 }
 
-static inline void xc4(smpfunc_t func, unsigned long arg1, unsigned long arg2,
+static inline void xc4(void *func, unsigned long arg1, unsigned long arg2,
 		       unsigned long arg3, unsigned long arg4)
 {
 	sparc32_ipi_ops->cross_call(func, *cpu_online_mask,
--- a/arch/sparc/kernel/leon_smp.c
+++ b/arch/sparc/kernel/leon_smp.c
@@ -359,7 +359,7 @@ void leonsmp_ipi_interrupt(void)
 }
 
 static struct smp_funcall {
-	smpfunc_t func;
+	void *func;
 	unsigned long arg1;
 	unsigned long arg2;
 	unsigned long arg3;
@@ -372,7 +372,7 @@ static struct smp_funcall {
 static DEFINE_SPINLOCK(cross_call_lock);
 
 /* Cross calls must be serialized, at least currently. */
-static void leon_cross_call(smpfunc_t func, cpumask_t mask, unsigned long arg1,
+static void leon_cross_call(void *func, cpumask_t mask, unsigned long arg1,
 			    unsigned long arg2, unsigned long arg3,
 			    unsigned long arg4)
 {
@@ -384,7 +384,7 @@ static void leon_cross_call(smpfunc_t fu
 
 		{
 			/* If you make changes here, make sure gcc generates proper code... */
-			register smpfunc_t f asm("i0") = func;
+			register void *f asm("i0") = func;
 			register unsigned long a1 asm("i1") = arg1;
 			register unsigned long a2 asm("i2") = arg2;
 			register unsigned long a3 asm("i3") = arg3;
@@ -444,11 +444,13 @@ static void leon_cross_call(smpfunc_t fu
 /* Running cross calls. */
 void leon_cross_call_irq(void)
 {
+	void (*func)(unsigned long, unsigned long, unsigned long, unsigned long,
+		     unsigned long) = ccall_info.func;
 	int i = smp_processor_id();
 
 	ccall_info.processors_in[i] = 1;
-	ccall_info.func(ccall_info.arg1, ccall_info.arg2, ccall_info.arg3,
-			ccall_info.arg4, ccall_info.arg5);
+	func(ccall_info.arg1, ccall_info.arg2, ccall_info.arg3, ccall_info.arg4,
+	     ccall_info.arg5);
 	ccall_info.processors_out[i] = 1;
 }
 
--- a/arch/sparc/kernel/sun4d_smp.c
+++ b/arch/sparc/kernel/sun4d_smp.c
@@ -268,7 +268,7 @@ static void sun4d_ipi_resched(int cpu)
 }
 
 static struct smp_funcall {
-	smpfunc_t func;
+	void *func;
 	unsigned long arg1;
 	unsigned long arg2;
 	unsigned long arg3;
@@ -281,7 +281,7 @@ static struct smp_funcall {
 static DEFINE_SPINLOCK(cross_call_lock);
 
 /* Cross calls must be serialized, at least currently. */
-static void sun4d_cross_call(smpfunc_t func, cpumask_t mask, unsigned long arg1,
+static void sun4d_cross_call(void *func, cpumask_t mask, unsigned long arg1,
 			     unsigned long arg2, unsigned long arg3,
 			     unsigned long arg4)
 {
@@ -296,7 +296,7 @@ static void sun4d_cross_call(smpfunc_t f
 			 * If you make changes here, make sure
 			 * gcc generates proper code...
 			 */
-			register smpfunc_t f asm("i0") = func;
+			register void *f asm("i0") = func;
 			register unsigned long a1 asm("i1") = arg1;
 			register unsigned long a2 asm("i2") = arg2;
 			register unsigned long a3 asm("i3") = arg3;
@@ -353,11 +353,13 @@ static void sun4d_cross_call(smpfunc_t f
 /* Running cross calls. */
 void smp4d_cross_call_irq(void)
 {
+	void (*func)(unsigned long, unsigned long, unsigned long, unsigned long,
+		     unsigned long) = ccall_info.func;
 	int i = hard_smp_processor_id();
 
 	ccall_info.processors_in[i] = 1;
-	ccall_info.func(ccall_info.arg1, ccall_info.arg2, ccall_info.arg3,
-			ccall_info.arg4, ccall_info.arg5);
+	func(ccall_info.arg1, ccall_info.arg2, ccall_info.arg3, ccall_info.arg4,
+	     ccall_info.arg5);
 	ccall_info.processors_out[i] = 1;
 }
 
--- a/arch/sparc/kernel/sun4m_smp.c
+++ b/arch/sparc/kernel/sun4m_smp.c
@@ -157,7 +157,7 @@ static void sun4m_ipi_mask_one(int cpu)
 }
 
 static struct smp_funcall {
-	smpfunc_t func;
+	void *func;
 	unsigned long arg1;
 	unsigned long arg2;
 	unsigned long arg3;
@@ -170,7 +170,7 @@ static struct smp_funcall {
 static DEFINE_SPINLOCK(cross_call_lock);
 
 /* Cross calls must be serialized, at least currently. */
-static void sun4m_cross_call(smpfunc_t func, cpumask_t mask, unsigned long arg1,
+static void sun4m_cross_call(void *func, cpumask_t mask, unsigned long arg1,
 			     unsigned long arg2, unsigned long arg3,
 			     unsigned long arg4)
 {
@@ -230,11 +230,13 @@ static void sun4m_cross_call(smpfunc_t f
 /* Running cross calls. */
 void smp4m_cross_call_irq(void)
 {
+	void (*func)(unsigned long, unsigned long, unsigned long, unsigned long,
+		     unsigned long) = ccall_info.func;
 	int i = smp_processor_id();
 
 	ccall_info.processors_in[i] = 1;
-	ccall_info.func(ccall_info.arg1, ccall_info.arg2, ccall_info.arg3,
-			ccall_info.arg4, ccall_info.arg5);
+	func(ccall_info.arg1, ccall_info.arg2, ccall_info.arg3, ccall_info.arg4,
+	     ccall_info.arg5);
 	ccall_info.processors_out[i] = 1;
 }
 
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -1636,19 +1636,19 @@ static void __init get_srmmu_type(void)
 /* Local cross-calls. */
 static void smp_flush_page_for_dma(unsigned long page)
 {
-	xc1((smpfunc_t) local_ops->page_for_dma, page);
+	xc1(local_ops->page_for_dma, page);
 	local_ops->page_for_dma(page);
 }
 
 static void smp_flush_cache_all(void)
 {
-	xc0((smpfunc_t) local_ops->cache_all);
+	xc0(local_ops->cache_all);
 	local_ops->cache_all();
 }
 
 static void smp_flush_tlb_all(void)
 {
-	xc0((smpfunc_t) local_ops->tlb_all);
+	xc0(local_ops->tlb_all);
 	local_ops->tlb_all();
 }
 
@@ -1659,7 +1659,7 @@ static void smp_flush_cache_mm(struct mm
 		cpumask_copy(&cpu_mask, mm_cpumask(mm));
 		cpumask_clear_cpu(smp_processor_id(), &cpu_mask);
 		if (!cpumask_empty(&cpu_mask))
-			xc1((smpfunc_t) local_ops->cache_mm, (unsigned long) mm);
+			xc1(local_ops->cache_mm, (unsigned long)mm);
 		local_ops->cache_mm(mm);
 	}
 }
@@ -1671,7 +1671,7 @@ static void smp_flush_tlb_mm(struct mm_s
 		cpumask_copy(&cpu_mask, mm_cpumask(mm));
 		cpumask_clear_cpu(smp_processor_id(), &cpu_mask);
 		if (!cpumask_empty(&cpu_mask)) {
-			xc1((smpfunc_t) local_ops->tlb_mm, (unsigned long) mm);
+			xc1(local_ops->tlb_mm, (unsigned long)mm);
 			if (atomic_read(&mm->mm_users) == 1 && current->active_mm == mm)
 				cpumask_copy(mm_cpumask(mm),
 					     cpumask_of(smp_processor_id()));
@@ -1691,8 +1691,8 @@ static void smp_flush_cache_range(struct
 		cpumask_copy(&cpu_mask, mm_cpumask(mm));
 		cpumask_clear_cpu(smp_processor_id(), &cpu_mask);
 		if (!cpumask_empty(&cpu_mask))
-			xc3((smpfunc_t) local_ops->cache_range,
-			    (unsigned long) vma, start, end);
+			xc3(local_ops->cache_range, (unsigned long)vma, start,
+			    end);
 		local_ops->cache_range(vma, start, end);
 	}
 }
@@ -1708,8 +1708,8 @@ static void smp_flush_tlb_range(struct v
 		cpumask_copy(&cpu_mask, mm_cpumask(mm));
 		cpumask_clear_cpu(smp_processor_id(), &cpu_mask);
 		if (!cpumask_empty(&cpu_mask))
-			xc3((smpfunc_t) local_ops->tlb_range,
-			    (unsigned long) vma, start, end);
+			xc3(local_ops->tlb_range, (unsigned long)vma, start,
+			    end);
 		local_ops->tlb_range(vma, start, end);
 	}
 }
@@ -1723,8 +1723,7 @@ static void smp_flush_cache_page(struct
 		cpumask_copy(&cpu_mask, mm_cpumask(mm));
 		cpumask_clear_cpu(smp_processor_id(), &cpu_mask);
 		if (!cpumask_empty(&cpu_mask))
-			xc2((smpfunc_t) local_ops->cache_page,
-			    (unsigned long) vma, page);
+			xc2(local_ops->cache_page, (unsigned long)vma, page);
 		local_ops->cache_page(vma, page);
 	}
 }
@@ -1738,8 +1737,7 @@ static void smp_flush_tlb_page(struct vm
 		cpumask_copy(&cpu_mask, mm_cpumask(mm));
 		cpumask_clear_cpu(smp_processor_id(), &cpu_mask);
 		if (!cpumask_empty(&cpu_mask))
-			xc2((smpfunc_t) local_ops->tlb_page,
-			    (unsigned long) vma, page);
+			xc2(local_ops->tlb_page, (unsigned long)vma, page);
 		local_ops->tlb_page(vma, page);
 	}
 }
@@ -1753,7 +1751,7 @@ static void smp_flush_page_to_ram(unsign
 	 * XXX This experiment failed, research further... -DaveM
 	 */
 #if 1
-	xc1((smpfunc_t) local_ops->page_to_ram, page);
+	xc1(local_ops->page_to_ram, page);
 #endif
 	local_ops->page_to_ram(page);
 }
@@ -1764,8 +1762,7 @@ static void smp_flush_sig_insns(struct m
 	cpumask_copy(&cpu_mask, mm_cpumask(mm));
 	cpumask_clear_cpu(smp_processor_id(), &cpu_mask);
 	if (!cpumask_empty(&cpu_mask))
-		xc2((smpfunc_t) local_ops->sig_insns,
-		    (unsigned long) mm, insn_addr);
+		xc2(local_ops->sig_insns, (unsigned long)mm, insn_addr);
 	local_ops->sig_insns(mm, insn_addr);
 }
 

[PATCH 5.19 02/48] Makefile.extrawarn: Move -Wcast-function-type-strict to W=1

[Greg Kroah-Hartman]

From: Sami Tolvanen <samitolvanen@google.com>

commit 2120635108b35ecad9c59c8b44f6cbdf4f98214e upstream.

We enable -Wcast-function-type globally in the kernel to warn about
mismatching types in function pointer casts. Compilers currently
warn only about ABI incompability with this flag, but Clang 16 will
enable a stricter version of the check by default that checks for an
exact type match. This will be very noisy in the kernel, so disable
-Wcast-function-type-strict without W=1 until the new warnings have
been addressed.

Cc: stable@vger.kernel.org
Link: https://reviews.llvm.org/D134831
Link: https://github.com/ClangBuiltLinux/linux/issues/1724
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220930203310.4010564-1-samitolvanen@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 scripts/Makefile.extrawarn |    1 +
 1 file changed, 1 insertion(+)

--- a/scripts/Makefile.extrawarn
+++ b/scripts/Makefile.extrawarn
@@ -53,6 +53,7 @@ KBUILD_CFLAGS += -Wno-format-zero-length
 KBUILD_CFLAGS += $(call cc-disable-warning, pointer-to-enum-cast)
 KBUILD_CFLAGS += -Wno-tautological-constant-out-of-range-compare
 KBUILD_CFLAGS += $(call cc-disable-warning, unaligned-access)
+KBUILD_CFLAGS += $(call cc-disable-warning, cast-function-type-strict)
 endif
 
 endif

[PATCH 5.19 03/48] hardening: Remove Clangs enable flag for -ftrivial-auto-var-init=zero

[Greg Kroah-Hartman]

From: Kees Cook <keescook@chromium.org>

commit 607e57c6c62c00965ae276902c166834ce73014a upstream.

Now that Clang's -enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang
option is no longer required, remove it from the command line. Clang 16
and later will warn when it is used, which will cause Kconfig to think
it can't use -ftrivial-auto-var-init=zero at all. Check for whether it
is required and only use it when so.

Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: linux-kbuild@vger.kernel.org
Cc: llvm@lists.linux.dev
Cc: stable@vger.kernel.org
Fixes: f02003c860d9 ("hardening: Avoid harmless Clang option under CONFIG_INIT_STACK_ALL_ZERO")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Makefile                   |    4 ++--
 security/Kconfig.hardening |   14 ++++++++++----
 2 files changed, 12 insertions(+), 6 deletions(-)

--- a/Makefile
+++ b/Makefile
@@ -830,8 +830,8 @@ endif
 # Initialize all stack variables with a zero value.
 ifdef CONFIG_INIT_STACK_ALL_ZERO
 KBUILD_CFLAGS	+= -ftrivial-auto-var-init=zero
-ifdef CONFIG_CC_IS_CLANG
-# https://bugs.llvm.org/show_bug.cgi?id=45497
+ifdef CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_ENABLER
+# https://github.com/llvm/llvm-project/issues/44842
 KBUILD_CFLAGS	+= -enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang
 endif
 endif
--- a/security/Kconfig.hardening
+++ b/security/Kconfig.hardening
@@ -22,11 +22,17 @@ menu "Memory initialization"
 config CC_HAS_AUTO_VAR_INIT_PATTERN
 	def_bool $(cc-option,-ftrivial-auto-var-init=pattern)
 
-config CC_HAS_AUTO_VAR_INIT_ZERO
-	# GCC ignores the -enable flag, so we can test for the feature with
-	# a single invocation using the flag, but drop it as appropriate in
-	# the Makefile, depending on the presence of Clang.
+config CC_HAS_AUTO_VAR_INIT_ZERO_BARE
+	def_bool $(cc-option,-ftrivial-auto-var-init=zero)
+
+config CC_HAS_AUTO_VAR_INIT_ZERO_ENABLER
+	# Clang 16 and later warn about using the -enable flag, but it
+	# is required before then.
 	def_bool $(cc-option,-ftrivial-auto-var-init=zero -enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang)
+	depends on !CC_HAS_AUTO_VAR_INIT_ZERO_BARE
+
+config CC_HAS_AUTO_VAR_INIT_ZERO
+	def_bool CC_HAS_AUTO_VAR_INIT_ZERO_BARE || CC_HAS_AUTO_VAR_INIT_ZERO_ENABLER
 
 choice
 	prompt "Initialize kernel stack variables at function entry"

[PATCH 5.19 04/48] docs: update mediator information in CoC docs

[Greg Kroah-Hartman]

From: Shuah Khan <skhan@linuxfoundation.org>

commit 8bfdfa0d6b929ede7b6189e0e546ceb6a124d05d upstream.

Update mediator information in the CoC interpretation document.

Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220901212319.56644-1-skhan@linuxfoundation.org
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/process/code-of-conduct-interpretation.rst |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/Documentation/process/code-of-conduct-interpretation.rst
+++ b/Documentation/process/code-of-conduct-interpretation.rst
@@ -51,7 +51,7 @@ the Technical Advisory Board (TAB) or ot
 uncertain how to handle situations that come up.  It will not be
 considered a violation report unless you want it to be.  If you are
 uncertain about approaching the TAB or any other maintainers, please
-reach out to our conflict mediator, Mishi Choudhary <mishi@linux.com>.
+reach out to our conflict mediator, Joanna Lee <joanna.lee@gesmer.com>.
 
 In the end, "be kind to each other" is really what the end goal is for
 everybody.  We know everyone is human and we all fail at times, but the

[PATCH 5.19 05/48] xsk: Inherit need_wakeup flag for shared sockets

[Greg Kroah-Hartman]

From: Jalal Mostafa <jalal.a.mostapha@gmail.com>

commit 60240bc26114543fcbfcd8a28466e67e77b20388 upstream.

The flag for need_wakeup is not set for xsks with `XDP_SHARED_UMEM`
flag and of different queue ids and/or devices. They should inherit
the flag from the first socket buffer pool since no flags can be
specified once `XDP_SHARED_UMEM` is specified.

Fixes: b5aea28dca134 ("xsk: Add shared umem support between queue ids")
Signed-off-by: Jalal Mostafa <jalal.a.mostapha@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220921135701.10199-1-jalal.a.mostapha@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/xsk_buff_pool.h |    2 +-
 net/xdp/xsk.c               |    4 ++--
 net/xdp/xsk_buff_pool.c     |    5 +++--
 3 files changed, 6 insertions(+), 5 deletions(-)

--- a/include/net/xsk_buff_pool.h
+++ b/include/net/xsk_buff_pool.h
@@ -95,7 +95,7 @@ struct xsk_buff_pool *xp_create_and_assi
 						struct xdp_umem *umem);
 int xp_assign_dev(struct xsk_buff_pool *pool, struct net_device *dev,
 		  u16 queue_id, u16 flags);
-int xp_assign_dev_shared(struct xsk_buff_pool *pool, struct xdp_umem *umem,
+int xp_assign_dev_shared(struct xsk_buff_pool *pool, struct xdp_sock *umem_xs,
 			 struct net_device *dev, u16 queue_id);
 int xp_alloc_tx_descs(struct xsk_buff_pool *pool, struct xdp_sock *xs);
 void xp_destroy(struct xsk_buff_pool *pool);
--- a/net/xdp/xsk.c
+++ b/net/xdp/xsk.c
@@ -951,8 +951,8 @@ static int xsk_bind(struct socket *sock,
 				goto out_unlock;
 			}
 
-			err = xp_assign_dev_shared(xs->pool, umem_xs->umem,
-						   dev, qid);
+			err = xp_assign_dev_shared(xs->pool, umem_xs, dev,
+						   qid);
 			if (err) {
 				xp_destroy(xs->pool);
 				xs->pool = NULL;
--- a/net/xdp/xsk_buff_pool.c
+++ b/net/xdp/xsk_buff_pool.c
@@ -212,17 +212,18 @@ err_unreg_pool:
 	return err;
 }
 
-int xp_assign_dev_shared(struct xsk_buff_pool *pool, struct xdp_umem *umem,
+int xp_assign_dev_shared(struct xsk_buff_pool *pool, struct xdp_sock *umem_xs,
 			 struct net_device *dev, u16 queue_id)
 {
 	u16 flags;
+	struct xdp_umem *umem = umem_xs->umem;
 
 	/* One fill and completion ring required for each queue id. */
 	if (!pool->fq || !pool->cq)
 		return -EINVAL;
 
 	flags = umem->zc ? XDP_ZEROCOPY : XDP_COPY;
-	if (pool->uses_need_wakeup)
+	if (umem_xs->pool->uses_need_wakeup)
 		flags |= XDP_USE_NEED_WAKEUP;
 
 	return xp_assign_dev(pool, dev, queue_id, flags);

[PATCH 5.19 06/48] wait_on_bit: add an acquire memory barrier

[Greg Kroah-Hartman]

From: Mikulas Patocka <mpatocka@redhat.com>

commit 8238b4579866b7c1bb99883cfe102a43db5506ff upstream.

There are several places in the kernel where wait_on_bit is not followed
by a memory barrier (for example, in drivers/md/dm-bufio.c:new_read).

On architectures with weak memory ordering, it may happen that memory
accesses that follow wait_on_bit are reordered before wait_on_bit and
they may return invalid data.

Fix this class of bugs by introducing a new function "test_bit_acquire"
that works like test_bit, but has acquire memory ordering semantics.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/include/asm/bitops.h                        |   21 +++++++++++++++++++
 include/asm-generic/bitops/instrumented-non-atomic.h |   12 ++++++++++
 include/asm-generic/bitops/non-atomic.h              |   14 ++++++++++++
 include/linux/buffer_head.h                          |    2 -
 include/linux/wait_bit.h                             |    8 +++----
 kernel/sched/wait_bit.c                              |    2 -
 6 files changed, 53 insertions(+), 6 deletions(-)

--- a/arch/x86/include/asm/bitops.h
+++ b/arch/x86/include/asm/bitops.h
@@ -207,6 +207,20 @@ static __always_inline bool constant_tes
 		(addr[nr >> _BITOPS_LONG_SHIFT])) != 0;
 }
 
+static __always_inline bool constant_test_bit_acquire(long nr, const volatile unsigned long *addr)
+{
+	bool oldbit;
+
+	asm volatile("testb %2,%1"
+		     CC_SET(nz)
+		     : CC_OUT(nz) (oldbit)
+		     : "m" (((unsigned char *)addr)[nr >> 3]),
+		       "i" (1 << (nr & 7))
+		     :"memory");
+
+	return oldbit;
+}
+
 static __always_inline bool variable_test_bit(long nr, volatile const unsigned long *addr)
 {
 	bool oldbit;
@@ -224,6 +238,13 @@ static __always_inline bool variable_tes
 	 ? constant_test_bit((nr), (addr))	\
 	 : variable_test_bit((nr), (addr)))
 
+static __always_inline bool
+arch_test_bit_acquire(unsigned long nr, const volatile unsigned long *addr)
+{
+	return __builtin_constant_p(nr) ? constant_test_bit_acquire(nr, addr) :
+					  variable_test_bit(nr, addr);
+}
+
 /**
  * __ffs - find first set bit in word
  * @word: The word to search
--- a/include/asm-generic/bitops/instrumented-non-atomic.h
+++ b/include/asm-generic/bitops/instrumented-non-atomic.h
@@ -135,4 +135,16 @@ static __always_inline bool test_bit(lon
 	return arch_test_bit(nr, addr);
 }
 
+/**
+ * _test_bit_acquire - Determine, with acquire semantics, whether a bit is set
+ * @nr: bit number to test
+ * @addr: Address to start counting from
+ */
+static __always_inline bool
+test_bit_acquire(unsigned long nr, const volatile unsigned long *addr)
+{
+	instrument_atomic_read(addr + BIT_WORD(nr), sizeof(long));
+	return arch_test_bit_acquire(nr, addr);
+}
+
 #endif /* _ASM_GENERIC_BITOPS_INSTRUMENTED_NON_ATOMIC_H */
--- a/include/asm-generic/bitops/non-atomic.h
+++ b/include/asm-generic/bitops/non-atomic.h
@@ -3,6 +3,7 @@
 #define _ASM_GENERIC_BITOPS_NON_ATOMIC_H_
 
 #include <asm/types.h>
+#include <asm/barrier.h>
 
 /**
  * arch___set_bit - Set a bit in memory
@@ -119,4 +120,17 @@ arch_test_bit(unsigned int nr, const vol
 }
 #define test_bit arch_test_bit
 
+/**
+ * arch_test_bit_acquire - Determine, with acquire semantics, whether a bit is set
+ * @nr: bit number to test
+ * @addr: Address to start counting from
+ */
+static __always_inline bool
+arch_test_bit_acquire(unsigned long nr, const volatile unsigned long *addr)
+{
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	return 1UL & (smp_load_acquire(p) >> (nr & (BITS_PER_LONG-1)));
+}
+#define test_bit_acquire arch_test_bit_acquire
+
 #endif /* _ASM_GENERIC_BITOPS_NON_ATOMIC_H_ */
--- a/include/linux/buffer_head.h
+++ b/include/linux/buffer_head.h
@@ -166,7 +166,7 @@ static __always_inline int buffer_uptoda
 	 * make it consistent with folio_test_uptodate
 	 * pairs with smp_mb__before_atomic in set_buffer_uptodate
 	 */
-	return (smp_load_acquire(&bh->b_state) & (1UL << BH_Uptodate)) != 0;
+	return test_bit_acquire(BH_Uptodate, &bh->b_state);
 }
 
 #define bh_offset(bh)		((unsigned long)(bh)->b_data & ~PAGE_MASK)
--- a/include/linux/wait_bit.h
+++ b/include/linux/wait_bit.h
@@ -71,7 +71,7 @@ static inline int
 wait_on_bit(unsigned long *word, int bit, unsigned mode)
 {
 	might_sleep();
-	if (!test_bit(bit, word))
+	if (!test_bit_acquire(bit, word))
 		return 0;
 	return out_of_line_wait_on_bit(word, bit,
 				       bit_wait,
@@ -96,7 +96,7 @@ static inline int
 wait_on_bit_io(unsigned long *word, int bit, unsigned mode)
 {
 	might_sleep();
-	if (!test_bit(bit, word))
+	if (!test_bit_acquire(bit, word))
 		return 0;
 	return out_of_line_wait_on_bit(word, bit,
 				       bit_wait_io,
@@ -123,7 +123,7 @@ wait_on_bit_timeout(unsigned long *word,
 		    unsigned long timeout)
 {
 	might_sleep();
-	if (!test_bit(bit, word))
+	if (!test_bit_acquire(bit, word))
 		return 0;
 	return out_of_line_wait_on_bit_timeout(word, bit,
 					       bit_wait_timeout,
@@ -151,7 +151,7 @@ wait_on_bit_action(unsigned long *word,
 		   unsigned mode)
 {
 	might_sleep();
-	if (!test_bit(bit, word))
+	if (!test_bit_acquire(bit, word))
 		return 0;
 	return out_of_line_wait_on_bit(word, bit, action, mode);
 }
--- a/kernel/sched/wait_bit.c
+++ b/kernel/sched/wait_bit.c
@@ -47,7 +47,7 @@ __wait_on_bit(struct wait_queue_head *wq
 		prepare_to_wait(wq_head, &wbq_entry->wq_entry, mode);
 		if (test_bit(wbq_entry->key.bit_nr, wbq_entry->key.flags))
 			ret = (*action)(&wbq_entry->key, mode);
-	} while (test_bit(wbq_entry->key.bit_nr, wbq_entry->key.flags) && !ret);
+	} while (test_bit_acquire(wbq_entry->key.bit_nr, wbq_entry->key.flags) && !ret);
 
 	finish_wait(wq_head, &wbq_entry->wq_entry);
 

[PATCH 5.19 07/48] provide arch_test_bit_acquire for architectures that define test_bit

[Greg Kroah-Hartman]

From: Mikulas Patocka <mpatocka@redhat.com>

commit d6ffe6067a54972564552ea45d320fb98db1ac5e upstream.

Some architectures define their own arch_test_bit and they also need
arch_test_bit_acquire, otherwise they won't compile.  We also clean up
the code by using the generic test_bit if that is equivalent to the
arch-specific version.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 8238b4579866 ("wait_on_bit: add an acquire memory barrier")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/alpha/include/asm/bitops.h   |    7 +++++++
 arch/hexagon/include/asm/bitops.h |   15 +++++++++++++++
 arch/ia64/include/asm/bitops.h    |    7 +++++++
 arch/m68k/include/asm/bitops.h    |    6 ++++++
 arch/s390/include/asm/bitops.h    |    7 +++++++
 arch/sh/include/asm/bitops-op32.h |    7 +++++++
 6 files changed, 49 insertions(+)

--- a/arch/alpha/include/asm/bitops.h
+++ b/arch/alpha/include/asm/bitops.h
@@ -289,6 +289,13 @@ test_bit(int nr, const volatile void * a
 	return (1UL & (((const int *) addr)[nr >> 5] >> (nr & 31))) != 0UL;
 }
 
+static __always_inline bool
+test_bit_acquire(unsigned long nr, const volatile unsigned long *addr)
+{
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	return 1UL & (smp_load_acquire(p) >> (nr & (BITS_PER_LONG-1)));
+}
+
 /*
  * ffz = Find First Zero in word. Undefined if no zero exists,
  * so code should check against ~0UL first..
--- a/arch/hexagon/include/asm/bitops.h
+++ b/arch/hexagon/include/asm/bitops.h
@@ -172,7 +172,22 @@ static inline int __test_bit(int nr, con
 	return retval;
 }
 
+static inline int __test_bit_acquire(int nr, const volatile unsigned long *addr)
+{
+	int retval;
+
+	asm volatile(
+	"{P0 = tstbit(%1,%2); if (P0.new) %0 = #1; if (!P0.new) %0 = #0;}\n"
+	: "=&r" (retval)
+	: "r" (addr[BIT_WORD(nr)]), "r" (nr % BITS_PER_LONG)
+	: "p0", "memory"
+	);
+
+	return retval;
+}
+
 #define test_bit(nr, addr) __test_bit(nr, addr)
+#define test_bit_acquire(nr, addr) __test_bit_acquire(nr, addr)
 
 /*
  * ffz - find first zero in word.
--- a/arch/ia64/include/asm/bitops.h
+++ b/arch/ia64/include/asm/bitops.h
@@ -337,6 +337,13 @@ test_bit (int nr, const volatile void *a
 	return 1 & (((const volatile __u32 *) addr)[nr >> 5] >> (nr & 31));
 }
 
+static __always_inline bool
+test_bit_acquire(unsigned long nr, const volatile unsigned long *addr)
+{
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	return 1UL & (smp_load_acquire(p) >> (nr & (BITS_PER_LONG-1)));
+}
+
 /**
  * ffz - find the first zero bit in a long word
  * @x: The long word to find the bit in
--- a/arch/m68k/include/asm/bitops.h
+++ b/arch/m68k/include/asm/bitops.h
@@ -153,6 +153,12 @@ static inline int test_bit(int nr, const
 	return (vaddr[nr >> 5] & (1UL << (nr & 31))) != 0;
 }
 
+static __always_inline bool
+test_bit_acquire(unsigned long nr, const volatile unsigned long *addr)
+{
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	return 1UL & (smp_load_acquire(p) >> (nr & (BITS_PER_LONG-1)));
+}
 
 static inline int bset_reg_test_and_set_bit(int nr,
 					    volatile unsigned long *vaddr)
--- a/arch/s390/include/asm/bitops.h
+++ b/arch/s390/include/asm/bitops.h
@@ -184,6 +184,13 @@ static inline bool arch_test_bit(unsigne
 	return *addr & mask;
 }
 
+static __always_inline bool
+arch_test_bit_acquire(unsigned long nr, const volatile unsigned long *addr)
+{
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	return 1UL & (smp_load_acquire(p) >> (nr & (BITS_PER_LONG-1)));
+}
+
 static inline bool arch_test_and_set_bit_lock(unsigned long nr,
 					      volatile unsigned long *ptr)
 {
--- a/arch/sh/include/asm/bitops-op32.h
+++ b/arch/sh/include/asm/bitops-op32.h
@@ -138,4 +138,11 @@ static inline int test_bit(int nr, const
 	return 1UL & (addr[BIT_WORD(nr)] >> (nr & (BITS_PER_LONG-1)));
 }
 
+static __always_inline bool
+test_bit_acquire(unsigned long nr, const volatile unsigned long *addr)
+{
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	return 1UL & (smp_load_acquire(p) >> (nr & (BITS_PER_LONG-1)));
+}
+
 #endif /* __ASM_SH_BITOPS_OP32_H */

[PATCH 5.19 08/48] fs: fix UAF/GPF bug in nilfs_mdt_destroy

[Greg Kroah-Hartman]

From: Dongliang Mu <mudongliangabcd@gmail.com>

commit 2e488f13755ffbb60f307e991b27024716a33b29 upstream.

In alloc_inode, inode_init_always() could return -ENOMEM if
security_inode_alloc() fails, which causes inode->i_private
uninitialized. Then nilfs_is_metadata_file_inode() returns
true and nilfs_free_inode() wrongly calls nilfs_mdt_destroy(),
which frees the uninitialized inode->i_private
and leads to crashes(e.g., UAF/GPF).

Fix this by moving security_inode_alloc just prior to
this_cpu_inc(nr_inodes)

Link: https://lkml.kernel.org/r/CAFcO6XOcf1Jj2SeGt=jJV59wmhESeSKpfR0omdFRq+J9nD1vfQ@mail.gmail.com
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Reported-by: Hao Sun <sunhao.th@gmail.com>
Reported-by: Jiacheng Xu <stitch@zju.edu.cn>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/inode.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- a/fs/inode.c
+++ b/fs/inode.c
@@ -192,8 +192,6 @@ int inode_init_always(struct super_block
 	inode->i_wb_frn_history = 0;
 #endif
 
-	if (security_inode_alloc(inode))
-		goto out;
 	spin_lock_init(&inode->i_lock);
 	lockdep_set_class(&inode->i_lock, &sb->s_type->i_lock_key);
 
@@ -228,11 +226,12 @@ int inode_init_always(struct super_block
 	inode->i_fsnotify_mask = 0;
 #endif
 	inode->i_flctx = NULL;
+
+	if (unlikely(security_inode_alloc(inode)))
+		return -ENOMEM;
 	this_cpu_inc(nr_inodes);
 
 	return 0;
-out:
-	return -ENOMEM;
 }
 EXPORT_SYMBOL(inode_init_always);
 

[PATCH 5.19 09/48] firmware: arm_scmi: Improve checks in the info_get operations

[Greg Kroah-Hartman]

From: Cristian Marussi <cristian.marussi@arm.com>

[ Upstream commit 1ecb7d27b1af6705e9a4e94415b4d8cc8cf2fbfb ]

SCMI protocols abstract and expose a number of protocol specific
resources like clocks, sensors and so on. Information about such
specific domain resources are generally exposed via an `info_get`
protocol operation.

Improve the sanity check on these operations where needed.

Link: https://lore.kernel.org/r/20220817172731.1185305-3-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/arm_scmi/clock.c   | 6 +++++-
 drivers/firmware/arm_scmi/sensors.c | 3 +++
 include/linux/scmi_protocol.h       | 4 ++--
 3 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/firmware/arm_scmi/clock.c b/drivers/firmware/arm_scmi/clock.c
index 3ed7ae0d6781..96060bf90a24 100644
--- a/drivers/firmware/arm_scmi/clock.c
+++ b/drivers/firmware/arm_scmi/clock.c
@@ -450,9 +450,13 @@ static int scmi_clock_count_get(const struct scmi_protocol_handle *ph)
 static const struct scmi_clock_info *
 scmi_clock_info_get(const struct scmi_protocol_handle *ph, u32 clk_id)
 {
+	struct scmi_clock_info *clk;
 	struct clock_info *ci = ph->get_priv(ph);
-	struct scmi_clock_info *clk = ci->clk + clk_id;
 
+	if (clk_id >= ci->num_clocks)
+		return NULL;
+
+	clk = ci->clk + clk_id;
 	if (!clk->name[0])
 		return NULL;
 
diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c
index 7288c6117838..7d0c7476d206 100644
--- a/drivers/firmware/arm_scmi/sensors.c
+++ b/drivers/firmware/arm_scmi/sensors.c
@@ -948,6 +948,9 @@ scmi_sensor_info_get(const struct scmi_protocol_handle *ph, u32 sensor_id)
 {
 	struct sensors_info *si = ph->get_priv(ph);
 
+	if (sensor_id >= si->num_sensors)
+		return NULL;
+
 	return si->sensors + sensor_id;
 }
 
diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
index 704111f63993..6dd50ac82d10 100644
--- a/include/linux/scmi_protocol.h
+++ b/include/linux/scmi_protocol.h
@@ -78,7 +78,7 @@ struct scmi_protocol_handle;
 struct scmi_clk_proto_ops {
 	int (*count_get)(const struct scmi_protocol_handle *ph);
 
-	const struct scmi_clock_info *(*info_get)
+	const struct scmi_clock_info __must_check *(*info_get)
 		(const struct scmi_protocol_handle *ph, u32 clk_id);
 	int (*rate_get)(const struct scmi_protocol_handle *ph, u32 clk_id,
 			u64 *rate);
@@ -460,7 +460,7 @@ enum scmi_sensor_class {
  */
 struct scmi_sensor_proto_ops {
 	int (*count_get)(const struct scmi_protocol_handle *ph);
-	const struct scmi_sensor_info *(*info_get)
+	const struct scmi_sensor_info __must_check *(*info_get)
 		(const struct scmi_protocol_handle *ph, u32 sensor_id);
 	int (*trip_point_config)(const struct scmi_protocol_handle *ph,
 				 u32 sensor_id, u8 trip_id, u64 trip_value);
-- 
2.35.1

[PATCH 5.19 10/48] firmware: arm_scmi: Harden accesses to the sensor domains

[Greg Kroah-Hartman]

From: Cristian Marussi <cristian.marussi@arm.com>

[ Upstream commit 76f89c954788763db575fb512a40bd483864f1e9 ]

Accessing sensor domains descriptors by the index upon the SCMI drivers
requests through the SCMI sensor operations interface can potentially
lead to out-of-bound violations if the SCMI driver misbehave.

Add an internal consistency check before any such domains descriptors
accesses.

Link: https://lore.kernel.org/r/20220817172731.1185305-4-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/arm_scmi/sensors.c | 22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)

diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c
index 7d0c7476d206..0b5853fa9d87 100644
--- a/drivers/firmware/arm_scmi/sensors.c
+++ b/drivers/firmware/arm_scmi/sensors.c
@@ -762,6 +762,10 @@ static int scmi_sensor_config_get(const struct scmi_protocol_handle *ph,
 {
 	int ret;
 	struct scmi_xfer *t;
+	struct sensors_info *si = ph->get_priv(ph);
+
+	if (sensor_id >= si->num_sensors)
+		return -EINVAL;
 
 	ret = ph->xops->xfer_get_init(ph, SENSOR_CONFIG_GET,
 				      sizeof(__le32), sizeof(__le32), &t);
@@ -771,7 +775,6 @@ static int scmi_sensor_config_get(const struct scmi_protocol_handle *ph,
 	put_unaligned_le32(sensor_id, t->tx.buf);
 	ret = ph->xops->do_xfer(ph, t);
 	if (!ret) {
-		struct sensors_info *si = ph->get_priv(ph);
 		struct scmi_sensor_info *s = si->sensors + sensor_id;
 
 		*sensor_config = get_unaligned_le64(t->rx.buf);
@@ -788,6 +791,10 @@ static int scmi_sensor_config_set(const struct scmi_protocol_handle *ph,
 	int ret;
 	struct scmi_xfer *t;
 	struct scmi_msg_sensor_config_set *msg;
+	struct sensors_info *si = ph->get_priv(ph);
+
+	if (sensor_id >= si->num_sensors)
+		return -EINVAL;
 
 	ret = ph->xops->xfer_get_init(ph, SENSOR_CONFIG_SET,
 				      sizeof(*msg), 0, &t);
@@ -800,7 +807,6 @@ static int scmi_sensor_config_set(const struct scmi_protocol_handle *ph,
 
 	ret = ph->xops->do_xfer(ph, t);
 	if (!ret) {
-		struct sensors_info *si = ph->get_priv(ph);
 		struct scmi_sensor_info *s = si->sensors + sensor_id;
 
 		s->sensor_config = sensor_config;
@@ -831,8 +837,11 @@ static int scmi_sensor_reading_get(const struct scmi_protocol_handle *ph,
 	int ret;
 	struct scmi_xfer *t;
 	struct scmi_msg_sensor_reading_get *sensor;
+	struct scmi_sensor_info *s;
 	struct sensors_info *si = ph->get_priv(ph);
-	struct scmi_sensor_info *s = si->sensors + sensor_id;
+
+	if (sensor_id >= si->num_sensors)
+		return -EINVAL;
 
 	ret = ph->xops->xfer_get_init(ph, SENSOR_READING_GET,
 				      sizeof(*sensor), 0, &t);
@@ -841,6 +850,7 @@ static int scmi_sensor_reading_get(const struct scmi_protocol_handle *ph,
 
 	sensor = t->tx.buf;
 	sensor->id = cpu_to_le32(sensor_id);
+	s = si->sensors + sensor_id;
 	if (s->async) {
 		sensor->flags = cpu_to_le32(SENSOR_READ_ASYNC);
 		ret = ph->xops->do_xfer_with_response(ph, t);
@@ -895,9 +905,13 @@ scmi_sensor_reading_get_timestamped(const struct scmi_protocol_handle *ph,
 	int ret;
 	struct scmi_xfer *t;
 	struct scmi_msg_sensor_reading_get *sensor;
+	struct scmi_sensor_info *s;
 	struct sensors_info *si = ph->get_priv(ph);
-	struct scmi_sensor_info *s = si->sensors + sensor_id;
 
+	if (sensor_id >= si->num_sensors)
+		return -EINVAL;
+
+	s = si->sensors + sensor_id;
 	if (!count || !readings ||
 	    (!s->num_axis && count > 1) || (s->num_axis && count > s->num_axis))
 		return -EINVAL;
-- 
2.35.1

[PATCH 5.19 11/48] firmware: arm_scmi: Add SCMI PM driver remove routine

[Greg Kroah-Hartman]

From: Cristian Marussi <cristian.marussi@arm.com>

[ Upstream commit dea796fcab0a219830831c070b8dc367d7e0f708 ]

Currently, when removing the SCMI PM driver not all the resources
registered with genpd subsystem are properly de-registered.

As a side effect of this after a driver unload/load cycle you get a
splat with a few warnings like this:

 | debugfs: Directory 'BIG_CPU0' with parent 'pm_genpd' already present!
 | debugfs: Directory 'BIG_CPU1' with parent 'pm_genpd' already present!
 | debugfs: Directory 'LITTLE_CPU0' with parent 'pm_genpd' already present!
 | debugfs: Directory 'LITTLE_CPU1' with parent 'pm_genpd' already present!
 | debugfs: Directory 'LITTLE_CPU2' with parent 'pm_genpd' already present!
 | debugfs: Directory 'LITTLE_CPU3' with parent 'pm_genpd' already present!
 | debugfs: Directory 'BIG_SSTOP' with parent 'pm_genpd' already present!
 | debugfs: Directory 'LITTLE_SSTOP' with parent 'pm_genpd' already present!
 | debugfs: Directory 'DBGSYS' with parent 'pm_genpd' already present!
 | debugfs: Directory 'GPUTOP' with parent 'pm_genpd' already present!

Add a proper scmi_pm_domain_remove callback to the driver in order to
take care of all the needed cleanups not handled by devres framework.

Link: https://lore.kernel.org/r/20220817172731.1185305-7-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/arm_scmi/scmi_pm_domain.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/firmware/arm_scmi/scmi_pm_domain.c b/drivers/firmware/arm_scmi/scmi_pm_domain.c
index d5dee625de78..0e05a79de82d 100644
--- a/drivers/firmware/arm_scmi/scmi_pm_domain.c
+++ b/drivers/firmware/arm_scmi/scmi_pm_domain.c
@@ -112,9 +112,28 @@ static int scmi_pm_domain_probe(struct scmi_device *sdev)
 	scmi_pd_data->domains = domains;
 	scmi_pd_data->num_domains = num_domains;
 
+	dev_set_drvdata(dev, scmi_pd_data);
+
 	return of_genpd_add_provider_onecell(np, scmi_pd_data);
 }
 
+static void scmi_pm_domain_remove(struct scmi_device *sdev)
+{
+	int i;
+	struct genpd_onecell_data *scmi_pd_data;
+	struct device *dev = &sdev->dev;
+	struct device_node *np = dev->of_node;
+
+	of_genpd_del_provider(np);
+
+	scmi_pd_data = dev_get_drvdata(dev);
+	for (i = 0; i < scmi_pd_data->num_domains; i++) {
+		if (!scmi_pd_data->domains[i])
+			continue;
+		pm_genpd_remove(scmi_pd_data->domains[i]);
+	}
+}
+
 static const struct scmi_device_id scmi_id_table[] = {
 	{ SCMI_PROTOCOL_POWER, "genpd" },
 	{ },
@@ -124,6 +143,7 @@ MODULE_DEVICE_TABLE(scmi, scmi_id_table);
 static struct scmi_driver scmi_power_domain_driver = {
 	.name = "scmi-power-domain",
 	.probe = scmi_pm_domain_probe,
+	.remove = scmi_pm_domain_remove,
 	.id_table = scmi_id_table,
 };
 module_scmi_driver(scmi_power_domain_driver);
-- 
2.35.1

[PATCH 5.19 12/48] arm64: dts: rockchip: fix upper usb port on BPI-R2-Pro

[Greg Kroah-Hartman]

From: Frank Wunderlich <frank-w@public-files.de>

[ Upstream commit 388f9f0a7ff84b7890a24499a3a1fea0cad21373 ]

- extcon is no more needed in 5.19 - so drop it
  commit 51a9b2c03dd3 ("phy: rockchip-inno-usb2: Handle ID IRQ")
- dr_mode was changed from host to otg in rk356x.dtsi
  commit bc405bb3eeee ("arm64: dts: rockchip: enable otg/drd
    operation of usb_host0_xhci in rk356x")
  change it back on board level as id-pin on r2pro is not connected

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20220821121929.244112-1-linux@fw-web.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index 40cf2236c0b6..ca48d9a54939 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -558,7 +558,7 @@ &usb_host0_ohci {
 };
 
 &usb_host0_xhci {
-	extcon = <&usb2phy0>;
+	dr_mode = "host";
 	status = "okay";
 };
 
-- 
2.35.1

[PATCH 5.19 13/48] dmaengine: xilinx_dma: Fix devm_platform_ioremap_resource error handling

[Greg Kroah-Hartman]

From: Swati Agarwal <swati.agarwal@xilinx.com>

[ Upstream commit 91df7751eb890e970afc08f50b8f0fa5ea39e03d ]

Add missing cleanup in devm_platform_ioremap_resource().
When probe fails remove dma channel resources and disable clocks in
accordance with the order of resources allocated .

Signed-off-by: Swati Agarwal <swati.agarwal@xilinx.com>
Link: https://lore.kernel.org/r/20220817061125.4720-2-swati.agarwal@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/xilinx/xilinx_dma.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index cd62bbb50e8b..ba0dccaa8cf1 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -3160,9 +3160,10 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 
 	/* Request and map I/O memory */
 	xdev->regs = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(xdev->regs))
-		return PTR_ERR(xdev->regs);
-
+	if (IS_ERR(xdev->regs)) {
+		err = PTR_ERR(xdev->regs);
+		goto disable_clks;
+	}
 	/* Retrieve the DMA engine properties from the device tree */
 	xdev->max_buffer_len = GENMASK(XILINX_DMA_MAX_TRANS_LEN_MAX - 1, 0);
 	xdev->s2mm_chan_id = xdev->dma_config->max_channels / 2;
@@ -3259,7 +3260,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 	for_each_child_of_node(node, child) {
 		err = xilinx_dma_child_probe(xdev, child);
 		if (err < 0)
-			goto disable_clks;
+			goto error;
 	}
 
 	if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
@@ -3294,12 +3295,12 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 
 	return 0;
 
-disable_clks:
-	xdma_disable_allclks(xdev);
 error:
 	for (i = 0; i < xdev->dma_config->max_channels; i++)
 		if (xdev->chan[i])
 			xilinx_dma_chan_remove(xdev->chan[i]);
+disable_clks:
+	xdma_disable_allclks(xdev);
 
 	return err;
 }
-- 
2.35.1

[PATCH 5.19 14/48] dmaengine: xilinx_dma: cleanup for fetching xlnx,num-fstores property

[Greg Kroah-Hartman]

From: Swati Agarwal <swati.agarwal@xilinx.com>

[ Upstream commit 462bce790e6a7e68620a4ce260cc38f7ed0255d5 ]

Free the allocated resources for missing xlnx,num-fstores property.

Signed-off-by: Swati Agarwal <swati.agarwal@xilinx.com>
Link: https://lore.kernel.org/r/20220817061125.4720-3-swati.agarwal@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/xilinx/xilinx_dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index ba0dccaa8cf1..f63ec9d862ff 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -3191,7 +3191,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 		if (err < 0) {
 			dev_err(xdev->dev,
 				"missing xlnx,num-fstores property\n");
-			return err;
+			goto disable_clks;
 		}
 
 		err = of_property_read_u32(node, "xlnx,flush-fsync",
-- 
2.35.1

[PATCH 5.19 15/48] dmaengine: xilinx_dma: Report error in case of dma_set_mask_and_coherent API failure

[Greg Kroah-Hartman]

From: Swati Agarwal <swati.agarwal@xilinx.com>

[ Upstream commit 8f2b6bc79c32f0fa60df000ae387a790ec80eae9 ]

The driver does not handle the failure case while calling
dma_set_mask_and_coherent API.

In case of failure, capture the return value of API and then report an
error.

Addresses-coverity: Unchecked return value (CHECKED_RETURN)

Signed-off-by: Swati Agarwal <swati.agarwal@xilinx.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/20220817061125.4720-4-swati.agarwal@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/xilinx/xilinx_dma.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index f63ec9d862ff..7ce8bb160a59 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -3211,7 +3211,11 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 		xdev->ext_addr = false;
 
 	/* Set the dma mask bits */
-	dma_set_mask_and_coherent(xdev->dev, DMA_BIT_MASK(addr_width));
+	err = dma_set_mask_and_coherent(xdev->dev, DMA_BIT_MASK(addr_width));
+	if (err < 0) {
+		dev_err(xdev->dev, "DMA mask error %d\n", err);
+		goto disable_clks;
+	}
 
 	/* Initialize the DMA engine */
 	xdev->common.dev = &pdev->dev;
-- 
2.35.1

[PATCH 5.19 16/48] wifi: iwlwifi: dont spam logs with NSS>2 messages

[Greg Kroah-Hartman]

From: Jason A. Donenfeld <Jason@zx2c4.com>

[ Upstream commit 4d8421f2dd88583cc7a4d6c2a5532c35e816a52a ]

I get a log line like this every 4 seconds when connected to my AP:

[15650.221468] iwlwifi 0000:09:00.0: Got NSS = 4 - trimming to 2

Looking at the code, this seems to be related to a hardware limitation,
and there's nothing to be done. In an effort to keep my dmesg
manageable, downgrade this error to "debug" rather than "info".

Cc: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220905172246.105383-1-Jason@zx2c4.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
index c5626ff83805..640e3786c244 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -1833,8 +1833,8 @@ static void iwl_mvm_parse_ppe(struct iwl_mvm *mvm,
 	* If nss < MAX: we can set zeros in other streams
 	*/
 	if (nss > MAX_HE_SUPP_NSS) {
-		IWL_INFO(mvm, "Got NSS = %d - trimming to %d\n", nss,
-			 MAX_HE_SUPP_NSS);
+		IWL_DEBUG_INFO(mvm, "Got NSS = %d - trimming to %d\n", nss,
+			       MAX_HE_SUPP_NSS);
 		nss = MAX_HE_SUPP_NSS;
 	}
 
-- 
2.35.1

[PATCH 5.19 17/48] ARM: dts: fix Moxa SDIO compatible, remove sdhci misnomer

[Greg Kroah-Hartman]

From: Sergei Antonov <saproj@gmail.com>

[ Upstream commit 02181e68275d28cab3c3f755852770367f1bc229 ]

Driver moxart-mmc.c has .compatible = "moxa,moxart-mmc".

But moxart .dts/.dtsi and the documentation file moxa,moxart-dma.txt
contain compatible = "moxa,moxart-sdhci".

Change moxart .dts/.dtsi files and moxa,moxart-dma.txt to match the driver.

Replace 'sdhci' with 'mmc' in names too, since SDHCI is a different
controller from FTSDC010.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Link: https://lore.kernel.org/r/20220907175341.1477383-1-saproj@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt | 4 ++--
 arch/arm/boot/dts/moxart-uc7112lx.dts                     | 2 +-
 arch/arm/boot/dts/moxart.dtsi                             | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt b/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
index 8a9f3559335b..7e14e26676ec 100644
--- a/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
+++ b/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
@@ -34,8 +34,8 @@ Example:
 Use specific request line passing from dma
 For example, MMC request line is 5
 
-	sdhci: sdhci@98e00000 {
-		compatible = "moxa,moxart-sdhci";
+	mmc: mmc@98e00000 {
+		compatible = "moxa,moxart-mmc";
 		reg = <0x98e00000 0x5C>;
 		interrupts = <5 0>;
 		clocks = <&clk_apb>;
diff --git a/arch/arm/boot/dts/moxart-uc7112lx.dts b/arch/arm/boot/dts/moxart-uc7112lx.dts
index eb5291b0ee3a..e07b807b4cec 100644
--- a/arch/arm/boot/dts/moxart-uc7112lx.dts
+++ b/arch/arm/boot/dts/moxart-uc7112lx.dts
@@ -79,7 +79,7 @@ &clk_pll {
 	clocks = <&ref12>;
 };
 
-&sdhci {
+&mmc {
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi
index f5f070a87482..764832ddfa78 100644
--- a/arch/arm/boot/dts/moxart.dtsi
+++ b/arch/arm/boot/dts/moxart.dtsi
@@ -93,8 +93,8 @@ watchdog: watchdog@98500000 {
 			clock-names = "PCLK";
 		};
 
-		sdhci: sdhci@98e00000 {
-			compatible = "moxa,moxart-sdhci";
+		mmc: mmc@98e00000 {
+			compatible = "moxa,moxart-mmc";
 			reg = <0x98e00000 0x5C>;
 			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_apb>;
-- 
2.35.1

[PATCH 5.19 18/48] drm/amdgpu/mes: zero the sdma_hqd_mask of 2nd SDMA engine for SDMA 6.0.1

[Greg Kroah-Hartman]

From: Yifan Zhang <yifan1.zhang@amd.com>

[ Upstream commit 0af4ed0c329ebb4cef95fda4fcdbfcdea0255442 ]

there is only one SDMA engine in SDMA 6.0.1, the sdma_hqd_mask has to be
zeroed for the 2nd engine, otherwise MES scheduler will consider 2nd
engine exists and map/unmap SDMA queues to the non-existent engine.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c
index 69a70a0aaed9..6ab062c63da1 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c
@@ -169,6 +169,9 @@ int amdgpu_mes_init(struct amdgpu_device *adev)
 	for (i = 0; i < AMDGPU_MES_MAX_SDMA_PIPES; i++) {
 		if (adev->ip_versions[SDMA0_HWIP][0] < IP_VERSION(6, 0, 0))
 			adev->mes.sdma_hqd_mask[i] = i ? 0 : 0x3fc;
+		/* zero sdma_hqd_mask for non-existent engine */
+		else if (adev->sdma.num_instances == 1)
+			adev->mes.sdma_hqd_mask[i] = i ? 0 : 0xfc;
 		else
 			adev->mes.sdma_hqd_mask[i] = 0xfc;
 	}
-- 
2.35.1

[PATCH 5.19 19/48] scsi: qedf: Fix a UAF bug in __qedf_probe()

[Greg Kroah-Hartman]

From: Letu Ren <fantasquex@gmail.com>

[ Upstream commit fbfe96869b782364caebae0445763969ddb6ea67 ]

In __qedf_probe(), if qedf->cdev is NULL which means
qed_ops->common->probe() failed, then the program will goto label err1, and
scsi_host_put() will free lport->host pointer. Because the memory qedf
points to is allocated by libfc_host_alloc(), it will be freed by
scsi_host_put(). However, the if statement below label err0 only checks
whether qedf is NULL but doesn't check whether the memory has been freed.
So a UAF bug can occur.

There are two ways to reach the statements below err0. The first one is
described as before, "qedf" should be set to NULL. The second one is goto
"err0" directly. In the latter scenario qedf hasn't been changed and it has
the initial value NULL. As a result the if statement is not reachable in
any situation.

The KASAN logs are as follows:

[    2.312969] BUG: KASAN: use-after-free in __qedf_probe+0x5dcf/0x6bc0
[    2.312969]
[    2.312969] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    2.312969] Call Trace:
[    2.312969]  dump_stack_lvl+0x59/0x7b
[    2.312969]  print_address_description+0x7c/0x3b0
[    2.312969]  ? __qedf_probe+0x5dcf/0x6bc0
[    2.312969]  __kasan_report+0x160/0x1c0
[    2.312969]  ? __qedf_probe+0x5dcf/0x6bc0
[    2.312969]  kasan_report+0x4b/0x70
[    2.312969]  ? kobject_put+0x25d/0x290
[    2.312969]  kasan_check_range+0x2ca/0x310
[    2.312969]  __qedf_probe+0x5dcf/0x6bc0
[    2.312969]  ? selinux_kernfs_init_security+0xdc/0x5f0
[    2.312969]  ? trace_rpm_return_int_rcuidle+0x18/0x120
[    2.312969]  ? rpm_resume+0xa5c/0x16e0
[    2.312969]  ? qedf_get_generic_tlv_data+0x160/0x160
[    2.312969]  local_pci_probe+0x13c/0x1f0
[    2.312969]  pci_device_probe+0x37e/0x6c0

Link: https://lore.kernel.org/r/20211112120641.16073-1-fantasquex@gmail.com
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Co-developed-by: Wende Tan <twd2.me@gmail.com>
Signed-off-by: Wende Tan <twd2.me@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qedf/qedf_main.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c
index 3d6b137314f3..bbc4d5890ae6 100644
--- a/drivers/scsi/qedf/qedf_main.c
+++ b/drivers/scsi/qedf/qedf_main.c
@@ -3686,11 +3686,6 @@ static int __qedf_probe(struct pci_dev *pdev, int mode)
 err1:
 	scsi_host_put(lport->host);
 err0:
-	if (qedf) {
-		QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_DISC, "Probe done.\n");
-
-		clear_bit(QEDF_PROBING, &qedf->flags);
-	}
 	return rc;
 }
 
-- 
2.35.1

[PATCH 5.19 20/48] net/ieee802154: fix uninit value bug in dgram_sendmsg

[Greg Kroah-Hartman]

From: Haimin Zhang <tcs.kernel@gmail.com>

[ Upstream commit 94160108a70c8af17fa1484a37e05181c0e094af ]

There is uninit value bug in dgram_sendmsg function in
net/ieee802154/socket.c when the length of valid data pointed by the
msg->msg_name isn't verified.

We introducing a helper function ieee802154_sockaddr_check_size to
check namelen. First we check there is addr_type in ieee802154_addr_sa.
Then, we check namelen according to addr_type.

Also fixed in raw_bind, dgram_bind, dgram_connect.

Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/ieee802154_netdev.h | 37 +++++++++++++++++++++++++++++
 net/ieee802154/socket.c         | 42 ++++++++++++++++++---------------
 2 files changed, 60 insertions(+), 19 deletions(-)

diff --git a/include/net/ieee802154_netdev.h b/include/net/ieee802154_netdev.h
index d0d188c3294b..a8994f307fc3 100644
--- a/include/net/ieee802154_netdev.h
+++ b/include/net/ieee802154_netdev.h
@@ -15,6 +15,22 @@
 #ifndef IEEE802154_NETDEVICE_H
 #define IEEE802154_NETDEVICE_H
 
+#define IEEE802154_REQUIRED_SIZE(struct_type, member) \
+	(offsetof(typeof(struct_type), member) + \
+	sizeof(((typeof(struct_type) *)(NULL))->member))
+
+#define IEEE802154_ADDR_OFFSET \
+	offsetof(typeof(struct sockaddr_ieee802154), addr)
+
+#define IEEE802154_MIN_NAMELEN (IEEE802154_ADDR_OFFSET + \
+	IEEE802154_REQUIRED_SIZE(struct ieee802154_addr_sa, addr_type))
+
+#define IEEE802154_NAMELEN_SHORT (IEEE802154_ADDR_OFFSET + \
+	IEEE802154_REQUIRED_SIZE(struct ieee802154_addr_sa, short_addr))
+
+#define IEEE802154_NAMELEN_LONG (IEEE802154_ADDR_OFFSET + \
+	IEEE802154_REQUIRED_SIZE(struct ieee802154_addr_sa, hwaddr))
+
 #include <net/af_ieee802154.h>
 #include <linux/netdevice.h>
 #include <linux/skbuff.h>
@@ -165,6 +181,27 @@ static inline void ieee802154_devaddr_to_raw(void *raw, __le64 addr)
 	memcpy(raw, &temp, IEEE802154_ADDR_LEN);
 }
 
+static inline int
+ieee802154_sockaddr_check_size(struct sockaddr_ieee802154 *daddr, int len)
+{
+	struct ieee802154_addr_sa *sa;
+
+	sa = &daddr->addr;
+	if (len < IEEE802154_MIN_NAMELEN)
+		return -EINVAL;
+	switch (sa->addr_type) {
+	case IEEE802154_ADDR_SHORT:
+		if (len < IEEE802154_NAMELEN_SHORT)
+			return -EINVAL;
+		break;
+	case IEEE802154_ADDR_LONG:
+		if (len < IEEE802154_NAMELEN_LONG)
+			return -EINVAL;
+		break;
+	}
+	return 0;
+}
+
 static inline void ieee802154_addr_from_sa(struct ieee802154_addr *a,
 					   const struct ieee802154_addr_sa *sa)
 {
diff --git a/net/ieee802154/socket.c b/net/ieee802154/socket.c
index 718fb77bb372..7889e1ef7fad 100644
--- a/net/ieee802154/socket.c
+++ b/net/ieee802154/socket.c
@@ -200,8 +200,9 @@ static int raw_bind(struct sock *sk, struct sockaddr *_uaddr, int len)
 	int err = 0;
 	struct net_device *dev = NULL;
 
-	if (len < sizeof(*uaddr))
-		return -EINVAL;
+	err = ieee802154_sockaddr_check_size(uaddr, len);
+	if (err < 0)
+		return err;
 
 	uaddr = (struct sockaddr_ieee802154 *)_uaddr;
 	if (uaddr->family != AF_IEEE802154)
@@ -493,7 +494,8 @@ static int dgram_bind(struct sock *sk, struct sockaddr *uaddr, int len)
 
 	ro->bound = 0;
 
-	if (len < sizeof(*addr))
+	err = ieee802154_sockaddr_check_size(addr, len);
+	if (err < 0)
 		goto out;
 
 	if (addr->family != AF_IEEE802154)
@@ -564,8 +566,9 @@ static int dgram_connect(struct sock *sk, struct sockaddr *uaddr,
 	struct dgram_sock *ro = dgram_sk(sk);
 	int err = 0;
 
-	if (len < sizeof(*addr))
-		return -EINVAL;
+	err = ieee802154_sockaddr_check_size(addr, len);
+	if (err < 0)
+		return err;
 
 	if (addr->family != AF_IEEE802154)
 		return -EINVAL;
@@ -604,6 +607,7 @@ static int dgram_sendmsg(struct sock *sk, struct msghdr *msg, size_t size)
 	struct ieee802154_mac_cb *cb;
 	struct dgram_sock *ro = dgram_sk(sk);
 	struct ieee802154_addr dst_addr;
+	DECLARE_SOCKADDR(struct sockaddr_ieee802154*, daddr, msg->msg_name);
 	int hlen, tlen;
 	int err;
 
@@ -612,10 +616,20 @@ static int dgram_sendmsg(struct sock *sk, struct msghdr *msg, size_t size)
 		return -EOPNOTSUPP;
 	}
 
-	if (!ro->connected && !msg->msg_name)
-		return -EDESTADDRREQ;
-	else if (ro->connected && msg->msg_name)
-		return -EISCONN;
+	if (msg->msg_name) {
+		if (ro->connected)
+			return -EISCONN;
+		if (msg->msg_namelen < IEEE802154_MIN_NAMELEN)
+			return -EINVAL;
+		err = ieee802154_sockaddr_check_size(daddr, msg->msg_namelen);
+		if (err < 0)
+			return err;
+		ieee802154_addr_from_sa(&dst_addr, &daddr->addr);
+	} else {
+		if (!ro->connected)
+			return -EDESTADDRREQ;
+		dst_addr = ro->dst_addr;
+	}
 
 	if (!ro->bound)
 		dev = dev_getfirstbyhwtype(sock_net(sk), ARPHRD_IEEE802154);
@@ -651,16 +665,6 @@ static int dgram_sendmsg(struct sock *sk, struct msghdr *msg, size_t size)
 	cb = mac_cb_init(skb);
 	cb->type = IEEE802154_FC_TYPE_DATA;
 	cb->ackreq = ro->want_ack;
-
-	if (msg->msg_name) {
-		DECLARE_SOCKADDR(struct sockaddr_ieee802154*,
-				 daddr, msg->msg_name);
-
-		ieee802154_addr_from_sa(&dst_addr, &daddr->addr);
-	} else {
-		dst_addr = ro->dst_addr;
-	}
-
 	cb->secen = ro->secen;
 	cb->secen_override = ro->secen_override;
 	cb->seclevel = ro->seclevel;
-- 
2.35.1

[PATCH 5.19 21/48] net: marvell: prestera: add support for for Aldrin2

[Greg Kroah-Hartman]

From: Oleksandr Mazur <oleksandr.mazur@plvision.eu>

[ Upstream commit 9124dbcc2dd6c51e81f97f63f7807118c4eb140a ]

Aldrin2 (98DX8525) is a Marvell Prestera PP, with 100G support.

Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>

V2:
  - retarget to net tree instead of net-next;
  - fix missed colon in patch subject ('net marvell' vs 'net: mavell');
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/prestera/prestera_pci.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/marvell/prestera/prestera_pci.c b/drivers/net/ethernet/marvell/prestera/prestera_pci.c
index f538a749ebd4..59470d99f522 100644
--- a/drivers/net/ethernet/marvell/prestera/prestera_pci.c
+++ b/drivers/net/ethernet/marvell/prestera/prestera_pci.c
@@ -872,6 +872,7 @@ static void prestera_pci_remove(struct pci_dev *pdev)
 static const struct pci_device_id prestera_pci_devices[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0xC804) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0xC80C) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0xCC1E) },
 	{ }
 };
 MODULE_DEVICE_TABLE(pci, prestera_pci_devices);
-- 
2.35.1

[PATCH 5.19 22/48] ALSA: hda/hdmi: Fix the converter reuse for the silent stream

[Greg Kroah-Hartman]

From: Jaroslav Kysela <perex@perex.cz>

[ Upstream commit 5f80d6bd2b01de4cafac3302f58456bf860322fc ]

When the user space pcm stream uses the silent stream converter,
it is no longer allocated for the silent stream. Clear the appropriate
flag in the hdmi_pcm_open() function. The silent stream setup may
be applied in hdmi_pcm_close() (and the error path - open fcn) again.

If the flag is not cleared, the reuse conditions for the silent
stream converter in hdmi_choose_cvt() may improperly share
this converter.

Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220913070216.3233974-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_hdmi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index c9d9aa6351ec..c239d9dbbaef 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -1278,6 +1278,7 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo,
 	set_bit(pcm_idx, &spec->pcm_in_use);
 	per_pin = get_pin(spec, pin_idx);
 	per_pin->cvt_nid = per_cvt->cvt_nid;
+	per_pin->silent_stream = false;
 	hinfo->nid = per_cvt->cvt_nid;
 
 	/* flip stripe flag for the assigned stream if supported */
-- 
2.35.1

[PATCH 5.19 23/48] um: Cleanup syscall_handler_t cast in syscalls_32.h

[Greg Kroah-Hartman]

From: Lukas Straub <lukasstraub2@web.de>

[ Upstream commit 61670b4d270c71219def1fbc9441debc2ac2e6e9 ]

Like in f4f03f299a56ce4d73c5431e0327b3b6cb55ebb9
"um: Cleanup syscall_handler_t definition/cast, fix warning",
remove the cast to to fix the compiler warning.

Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/um/shared/sysdep/syscalls_32.h | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/x86/um/shared/sysdep/syscalls_32.h b/arch/x86/um/shared/sysdep/syscalls_32.h
index 68fd2cf526fd..f6e9f84397e7 100644
--- a/arch/x86/um/shared/sysdep/syscalls_32.h
+++ b/arch/x86/um/shared/sysdep/syscalls_32.h
@@ -6,10 +6,9 @@
 #include <asm/unistd.h>
 #include <sysdep/ptrace.h>
 
-typedef long syscall_handler_t(struct pt_regs);
+typedef long syscall_handler_t(struct syscall_args);
 
 extern syscall_handler_t *sys_call_table[];
 
 #define EXECUTE_SYSCALL(syscall, regs) \
-	((long (*)(struct syscall_args)) \
-	 (*sys_call_table[syscall]))(SYSCALL_ARGS(&regs->regs))
+	((*sys_call_table[syscall]))(SYSCALL_ARGS(&regs->regs))
-- 
2.35.1

[PATCH 5.19 24/48] um: Cleanup compiler warning in arch/x86/um/tls_32.c

[Greg Kroah-Hartman]

From: Lukas Straub <lukasstraub2@web.de>

[ Upstream commit d27fff3499671dc23a08efd01cdb8b3764a391c4 ]

arch.tls_array is statically allocated so checking for NULL doesn't
make sense. This causes the compiler warning below.

Remove the checks to silence these warnings.

../arch/x86/um/tls_32.c: In function 'get_free_idx':
../arch/x86/um/tls_32.c:68:13: warning: the comparison will always evaluate as 'true' for the address of 'tls_array' will never be NULL [-Waddress]
   68 |         if (!t->arch.tls_array)
      |             ^
In file included from ../arch/x86/um/asm/processor.h:10,
                 from ../include/linux/rcupdate.h:30,
                 from ../include/linux/rculist.h:11,
                 from ../include/linux/pid.h:5,
                 from ../include/linux/sched.h:14,
                 from ../arch/x86/um/tls_32.c:7:
../arch/x86/um/asm/processor_32.h:22:31: note: 'tls_array' declared here
   22 |         struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
      |                               ^~~~~~~~~
../arch/x86/um/tls_32.c: In function 'get_tls_entry':
../arch/x86/um/tls_32.c:243:13: warning: the comparison will always evaluate as 'true' for the address of 'tls_array' will never be NULL [-Waddress]
  243 |         if (!t->arch.tls_array)
      |             ^
../arch/x86/um/asm/processor_32.h:22:31: note: 'tls_array' declared here
   22 |         struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
      |                               ^~~~~~~~~

Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/um/tls_32.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/arch/x86/um/tls_32.c b/arch/x86/um/tls_32.c
index ac8eee093f9c..66162eafd8e8 100644
--- a/arch/x86/um/tls_32.c
+++ b/arch/x86/um/tls_32.c
@@ -65,9 +65,6 @@ static int get_free_idx(struct task_struct* task)
 	struct thread_struct *t = &task->thread;
 	int idx;
 
-	if (!t->arch.tls_array)
-		return GDT_ENTRY_TLS_MIN;
-
 	for (idx = 0; idx < GDT_ENTRY_TLS_ENTRIES; idx++)
 		if (!t->arch.tls_array[idx].present)
 			return idx + GDT_ENTRY_TLS_MIN;
@@ -240,9 +237,6 @@ static int get_tls_entry(struct task_struct *task, struct user_desc *info,
 {
 	struct thread_struct *t = &task->thread;
 
-	if (!t->arch.tls_array)
-		goto clear;
-
 	if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
 		return -EINVAL;
 
-- 
2.35.1

[PATCH 5.19 25/48] gpio: ftgpio010: Make irqchip immutable

[Greg Kroah-Hartman]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit ab637d48363d7b8ee67ae089808a8bc6051d53c4 ]

This turns the FTGPIO010 irqchip immutable.

Tested on the D-Link DIR-685.

Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-ftgpio010.c | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

diff --git a/drivers/gpio/gpio-ftgpio010.c b/drivers/gpio/gpio-ftgpio010.c
index f422c3e129a0..f77a965f5780 100644
--- a/drivers/gpio/gpio-ftgpio010.c
+++ b/drivers/gpio/gpio-ftgpio010.c
@@ -41,14 +41,12 @@
  * struct ftgpio_gpio - Gemini GPIO state container
  * @dev: containing device for this instance
  * @gc: gpiochip for this instance
- * @irq: irqchip for this instance
  * @base: remapped I/O-memory base
  * @clk: silicon clock
  */
 struct ftgpio_gpio {
 	struct device *dev;
 	struct gpio_chip gc;
-	struct irq_chip irq;
 	void __iomem *base;
 	struct clk *clk;
 };
@@ -70,6 +68,7 @@ static void ftgpio_gpio_mask_irq(struct irq_data *d)
 	val = readl(g->base + GPIO_INT_EN);
 	val &= ~BIT(irqd_to_hwirq(d));
 	writel(val, g->base + GPIO_INT_EN);
+	gpiochip_disable_irq(gc, irqd_to_hwirq(d));
 }
 
 static void ftgpio_gpio_unmask_irq(struct irq_data *d)
@@ -78,6 +77,7 @@ static void ftgpio_gpio_unmask_irq(struct irq_data *d)
 	struct ftgpio_gpio *g = gpiochip_get_data(gc);
 	u32 val;
 
+	gpiochip_enable_irq(gc, irqd_to_hwirq(d));
 	val = readl(g->base + GPIO_INT_EN);
 	val |= BIT(irqd_to_hwirq(d));
 	writel(val, g->base + GPIO_INT_EN);
@@ -221,6 +221,16 @@ static int ftgpio_gpio_set_config(struct gpio_chip *gc, unsigned int offset,
 	return 0;
 }
 
+static const struct irq_chip ftgpio_irq_chip = {
+	.name = "FTGPIO010",
+	.irq_ack = ftgpio_gpio_ack_irq,
+	.irq_mask = ftgpio_gpio_mask_irq,
+	.irq_unmask = ftgpio_gpio_unmask_irq,
+	.irq_set_type = ftgpio_gpio_set_irq_type,
+	.flags = IRQCHIP_IMMUTABLE,
+	 GPIOCHIP_IRQ_RESOURCE_HELPERS,
+};
+
 static int ftgpio_gpio_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -277,14 +287,8 @@ static int ftgpio_gpio_probe(struct platform_device *pdev)
 	if (!IS_ERR(g->clk))
 		g->gc.set_config = ftgpio_gpio_set_config;
 
-	g->irq.name = "FTGPIO010";
-	g->irq.irq_ack = ftgpio_gpio_ack_irq;
-	g->irq.irq_mask = ftgpio_gpio_mask_irq;
-	g->irq.irq_unmask = ftgpio_gpio_unmask_irq;
-	g->irq.irq_set_type = ftgpio_gpio_set_irq_type;
-
 	girq = &g->gc.irq;
-	girq->chip = &g->irq;
+	gpio_irq_chip_set_chip(girq, &ftgpio_irq_chip);
 	girq->parent_handler = ftgpio_gpio_irq_handler;
 	girq->num_parents = 1;
 	girq->parents = devm_kcalloc(dev, 1, sizeof(*girq->parents),
-- 
2.35.1

[PATCH 5.19 26/48] arch: um: Mark the stack non-executable to fix a binutils warning

[Greg Kroah-Hartman]

From: David Gow <davidgow@google.com>

[ Upstream commit bd71558d585ac61cfd799db7f25e78dca404dd7a ]

Since binutils 2.39, ld will print a warning if any stack section is
executable, which is the default for stack sections on files without a
.note.GNU-stack section.

This was fixed for x86 in commit ffcf9c5700e4 ("x86: link vdso and boot with -z noexecstack --no-warn-rwx-segments"),
but remained broken for UML, resulting in several warnings:

/usr/bin/ld: warning: arch/x86/um/vdso/vdso.o: missing .note.GNU-stack section implies executable stack
/usr/bin/ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
/usr/bin/ld: warning: .tmp_vmlinux.kallsyms1 has a LOAD segment with RWX permissions
/usr/bin/ld: warning: .tmp_vmlinux.kallsyms1.o: missing .note.GNU-stack section implies executable stack
/usr/bin/ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
/usr/bin/ld: warning: .tmp_vmlinux.kallsyms2 has a LOAD segment with RWX permissions
/usr/bin/ld: warning: .tmp_vmlinux.kallsyms2.o: missing .note.GNU-stack section implies executable stack
/usr/bin/ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
/usr/bin/ld: warning: vmlinux has a LOAD segment with RWX permissions

Link both the VDSO and vmlinux with -z noexecstack, fixing the warnings
about .note.GNU-stack sections. In addition, pass --no-warn-rwx-segments
to dodge the remaining warnings about LOAD segments with RWX permissions
in the kallsyms objects. (Note that this flag is apparently not
available on lld, so hide it behind a test for BFD, which is what the
x86 patch does.)

Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ffcf9c5700e49c0aee42dcba9a12ba21338e8136
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ba951afb99912da01a6e8434126b8fac7aa75107
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Tested-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/um/Makefile          | 8 ++++++++
 arch/x86/um/vdso/Makefile | 2 +-
 2 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/um/Makefile b/arch/um/Makefile
index f2fe63bfd819..f1d4d67157be 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -132,10 +132,18 @@ export LDS_ELF_FORMAT := $(ELF_FORMAT)
 # The wrappers will select whether using "malloc" or the kernel allocator.
 LINK_WRAPS = -Wl,--wrap,malloc -Wl,--wrap,free -Wl,--wrap,calloc
 
+# Avoid binutils 2.39+ warnings by marking the stack non-executable and
+# ignorning warnings for the kallsyms sections.
+LDFLAGS_EXECSTACK = -z noexecstack
+ifeq ($(CONFIG_LD_IS_BFD),y)
+LDFLAGS_EXECSTACK += $(call ld-option,--no-warn-rwx-segments)
+endif
+
 LD_FLAGS_CMDLINE = $(foreach opt,$(KBUILD_LDFLAGS),-Wl,$(opt))
 
 # Used by link-vmlinux.sh which has special support for um link
 export CFLAGS_vmlinux := $(LINK-y) $(LINK_WRAPS) $(LD_FLAGS_CMDLINE)
+export LDFLAGS_vmlinux := $(LDFLAGS_EXECSTACK)
 
 # When cleaning we don't include .config, so we don't include
 # TT or skas makefiles and don't clean skas_ptregs.h.
diff --git a/arch/x86/um/vdso/Makefile b/arch/x86/um/vdso/Makefile
index 5943387e3f35..5ca366e15c76 100644
--- a/arch/x86/um/vdso/Makefile
+++ b/arch/x86/um/vdso/Makefile
@@ -62,7 +62,7 @@ quiet_cmd_vdso = VDSO    $@
 		       -Wl,-T,$(filter %.lds,$^) $(filter %.o,$^) && \
 		 sh $(srctree)/$(src)/checkundef.sh '$(NM)' '$@'
 
-VDSO_LDFLAGS = -fPIC -shared -Wl,--hash-style=sysv
+VDSO_LDFLAGS = -fPIC -shared -Wl,--hash-style=sysv -z noexecstack
 GCOV_PROFILE := n
 
 #
-- 
2.35.1

[PATCH 5.19 27/48] net: atlantic: fix potential memory leak in aq_ndev_close()

[Greg Kroah-Hartman]

From: Jianglei Nie <niejianglei2021@163.com>

[ Upstream commit 65e5d27df61283e5390f04b09dc79cd832f95607 ]

If aq_nic_stop() fails, aq_ndev_close() returns err without calling
aq_nic_deinit() to release the relevant memory and resource, which
will lead to a memory leak.

We can fix it by deleting the if condition judgment and goto statement to
call aq_nic_deinit() directly after aq_nic_stop() to fix the memory leak.

Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/aquantia/atlantic/aq_main.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_main.c b/drivers/net/ethernet/aquantia/atlantic/aq_main.c
index 88595863d8bc..8a0af371e7dc 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_main.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_main.c
@@ -94,11 +94,8 @@ static int aq_ndev_close(struct net_device *ndev)
 	int err = 0;
 
 	err = aq_nic_stop(aq_nic);
-	if (err < 0)
-		goto err_exit;
 	aq_nic_deinit(aq_nic, true);
 
-err_exit:
 	return err;
 }
 
-- 
2.35.1

[PATCH 5.19 28/48] KVM: s390: Pass initialized arg even if unused

[Greg Kroah-Hartman]

From: Janis Schoetterl-Glausch <scgl@linux.ibm.com>

[ Upstream commit b3cefd6bf16e7234ffbd4209f6083060f4e35f59 ]

This silences smatch warnings reported by kbuild bot:
arch/s390/kvm/gaccess.c:859 guest_range_to_gpas() error: uninitialized symbol 'prot'.
arch/s390/kvm/gaccess.c:1064 access_guest_with_key() error: uninitialized symbol 'prot'.

This is because it cannot tell that the value is not used in this case.
The trans_exc* only examine prot if code is PGM_PROTECTION.
Pass a dummy value for other codes.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20220825192540.1560559-1-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kvm/gaccess.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/arch/s390/kvm/gaccess.c b/arch/s390/kvm/gaccess.c
index 227ed0009354..0e82bf85e59b 100644
--- a/arch/s390/kvm/gaccess.c
+++ b/arch/s390/kvm/gaccess.c
@@ -489,6 +489,8 @@ enum prot_type {
 	PROT_TYPE_ALC  = 2,
 	PROT_TYPE_DAT  = 3,
 	PROT_TYPE_IEP  = 4,
+	/* Dummy value for passing an initialized value when code != PGM_PROTECTION */
+	PROT_NONE,
 };
 
 static int trans_exc_ending(struct kvm_vcpu *vcpu, int code, unsigned long gva, u8 ar,
@@ -504,6 +506,10 @@ static int trans_exc_ending(struct kvm_vcpu *vcpu, int code, unsigned long gva,
 	switch (code) {
 	case PGM_PROTECTION:
 		switch (prot) {
+		case PROT_NONE:
+			/* We should never get here, acts like termination */
+			WARN_ON_ONCE(1);
+			break;
 		case PROT_TYPE_IEP:
 			tec->b61 = 1;
 			fallthrough;
@@ -968,8 +974,10 @@ static int guest_range_to_gpas(struct kvm_vcpu *vcpu, unsigned long ga, u8 ar,
 				return rc;
 		} else {
 			gpa = kvm_s390_real_to_abs(vcpu, ga);
-			if (kvm_is_error_gpa(vcpu->kvm, gpa))
+			if (kvm_is_error_gpa(vcpu->kvm, gpa)) {
 				rc = PGM_ADDRESSING;
+				prot = PROT_NONE;
+			}
 		}
 		if (rc)
 			return trans_exc(vcpu, rc, ga, ar, mode, prot);
@@ -1112,8 +1120,6 @@ int access_guest_with_key(struct kvm_vcpu *vcpu, unsigned long ga, u8 ar,
 		if (rc == PGM_PROTECTION && try_storage_prot_override)
 			rc = access_guest_page_with_key(vcpu->kvm, mode, gpas[idx],
 							data, fragment_len, PAGE_SPO_ACC);
-		if (rc == PGM_PROTECTION)
-			prot = PROT_TYPE_KEYC;
 		if (rc)
 			break;
 		len -= fragment_len;
@@ -1123,6 +1129,10 @@ int access_guest_with_key(struct kvm_vcpu *vcpu, unsigned long ga, u8 ar,
 	if (rc > 0) {
 		bool terminate = (mode == GACC_STORE) && (idx > 0);
 
+		if (rc == PGM_PROTECTION)
+			prot = PROT_TYPE_KEYC;
+		else
+			prot = PROT_NONE;
 		rc = trans_exc_ending(vcpu, rc, ga, ar, mode, prot, terminate);
 	}
 out_unlock:
-- 
2.35.1

[PATCH 5.19 29/48] drm/amd/display: Fix double cursor on non-video RGB MPO

[Greg Kroah-Hartman]

From: Leo Li <sunpeng.li@amd.com>

[ Upstream commit b261509952bc19d1012cf732f853659be6ebc61e ]

[Why]

DC makes use of layer_index (zpos) when picking the HW plane to enable
HW cursor on. However, some compositors will not attach zpos information
to each DRM plane. Consequently, in amdgpu, we default layer_index to 0
and do not update it.

This causes said DC logic to enable HW cursor on all planes of the same
layer_index, which manifests as a double cursor issue if one of the
planes is scaled (and hence scaling the cursor as well).

[How]

Use DRM core helpers to calculate a normalized_zpos value for each
drm_plane_state under each crtc, within the atomic state.

This helper will first consider existing zpos values, and if
identical/unset, fallback to plane ID ordering.

The normalized_zpos is then passed to dc_plane_info during atomic check
for later use by the cursor logic.

Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 0424570c736f..c781f92db959 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -5629,7 +5629,7 @@ fill_dc_plane_info_and_addr(struct amdgpu_device *adev,
 	plane_info->visible = true;
 	plane_info->stereo_format = PLANE_STEREO_FORMAT_NONE;
 
-	plane_info->layer_index = 0;
+	plane_info->layer_index = plane_state->normalized_zpos;
 
 	ret = fill_plane_color_attributes(plane_state, plane_info->format,
 					  &plane_info->color_space);
@@ -5697,7 +5697,7 @@ static int fill_dc_plane_attributes(struct amdgpu_device *adev,
 	dc_plane_state->global_alpha = plane_info.global_alpha;
 	dc_plane_state->global_alpha_value = plane_info.global_alpha_value;
 	dc_plane_state->dcc = plane_info.dcc;
-	dc_plane_state->layer_index = plane_info.layer_index; // Always returns 0
+	dc_plane_state->layer_index = plane_info.layer_index;
 	dc_plane_state->flip_int_enabled = true;
 
 	/*
@@ -11147,6 +11147,14 @@ static int amdgpu_dm_atomic_check(struct drm_device *dev,
 		}
 	}
 
+	/*
+	 * DC consults the zpos (layer_index in DC terminology) to determine the
+	 * hw plane on which to enable the hw cursor (see
+	 * `dcn10_can_pipe_disable_cursor`). By now, all modified planes are in
+	 * atomic state, so call drm helper to normalize zpos.
+	 */
+	drm_atomic_normalize_zpos(dev, state);
+
 	/* Remove exiting planes if they are modified */
 	for_each_oldnew_plane_in_state_reverse(state, plane, old_plane_state, new_plane_state, i) {
 		ret = dm_update_plane_state(dc, state, plane,
-- 
2.35.1

[PATCH 5.19 30/48] drm/amd/display: Assume an LTTPR is always present on fixed_vs links

[Greg Kroah-Hartman]

From: Michael Strauss <michael.strauss@amd.com>

[ Upstream commit 29956d0fded036a570bd8e7d4ea4b1a1730307d2 ]

[WHY]
LTTPRs can in very rare instsances fail to increment DPCD LTTPR count.
This results in aux-i LTTPR requests to be sent to the wrong DPCD
address, which causes link training failure.

[HOW]
Override internal repeater count if fixed_vs flag is set for a given link

Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index a4fc9a6c850e..0c52506b367d 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -5211,6 +5211,14 @@ bool dp_retrieve_lttpr_cap(struct dc_link *link)
 				lttpr_dpcd_data[DP_PHY_REPEATER_128B132B_RATES -
 								DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV];
 
+		/* If this chip cap is set, at least one retimer must exist in the chain
+		 * Override count to 1 if we receive a known bad count (0 or an invalid value) */
+		if (link->chip_caps & EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN &&
+				(dp_convert_to_count(link->dpcd_caps.lttpr_caps.phy_repeater_cnt) == 0)) {
+			ASSERT(0);
+			link->dpcd_caps.lttpr_caps.phy_repeater_cnt = 0x80;
+		}
+
 		/* Attempt to train in LTTPR transparent mode if repeater count exceeds 8. */
 		is_lttpr_present = (link->dpcd_caps.lttpr_caps.max_lane_count > 0 &&
 				link->dpcd_caps.lttpr_caps.max_lane_count <= 4 &&
-- 
2.35.1

[PATCH 5.19 31/48] drm/amd/display: update gamut remap if plane has changed

[Greg Kroah-Hartman]

From: Hugo Hu <hugo.hu@amd.com>

[ Upstream commit 52bb21499cf54fa65b56d97cd0d68579c90207dd ]

[Why]
The desktop plane and full-screen game plane may have different
gamut remap coefficients, if switching between desktop and
full-screen game without updating the gamut remap will cause
incorrect color.

[How]
Update gamut remap if planes change.

Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
index ec6aa8d8b251..213a02a769d4 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
@@ -1520,6 +1520,7 @@ static void dcn20_update_dchubp_dpp(
 	/* Any updates are handled in dc interface, just need
 	 * to apply existing for plane enable / opp change */
 	if (pipe_ctx->update_flags.bits.enable || pipe_ctx->update_flags.bits.opp_changed
+			|| pipe_ctx->update_flags.bits.plane_changed
 			|| pipe_ctx->stream->update_flags.bits.gamut_remap
 			|| pipe_ctx->stream->update_flags.bits.out_csc) {
 		/* dpp/cm gamut remap*/
-- 
2.35.1

[PATCH 5.19 32/48] drm/amd/display: skip audio setup when audio stream is enabled

[Greg Kroah-Hartman]

From: zhikzhai <zhikai.zhai@amd.com>

[ Upstream commit 65fbfb02c2734cacffec5e3f492e1b4f1dabcf98 ]

[why]
We have minimal pipe split transition method to avoid pipe
allocation outage.However, this method will invoke audio setup
which cause audio output stuck once pipe reallocate.

[how]
skip audio setup for pipelines which audio stream has been enabled

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: zhikzhai <zhikai.zhai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
index aee31c785aa9..4f0ea50eaa83 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
@@ -2165,7 +2165,8 @@ static void dce110_setup_audio_dto(
 			continue;
 		if (pipe_ctx->stream->signal != SIGNAL_TYPE_HDMI_TYPE_A)
 			continue;
-		if (pipe_ctx->stream_res.audio != NULL) {
+		if (pipe_ctx->stream_res.audio != NULL &&
+			pipe_ctx->stream_res.audio->enabled == false) {
 			struct audio_output audio_output;
 
 			build_audio_output(context, pipe_ctx, &audio_output);
@@ -2207,7 +2208,8 @@ static void dce110_setup_audio_dto(
 			if (!dc_is_dp_signal(pipe_ctx->stream->signal))
 				continue;
 
-			if (pipe_ctx->stream_res.audio != NULL) {
+			if (pipe_ctx->stream_res.audio != NULL &&
+				pipe_ctx->stream_res.audio->enabled == false) {
 				struct audio_output audio_output;
 
 				build_audio_output(context, pipe_ctx, &audio_output);
-- 
2.35.1

[PATCH 5.19 33/48] drm/amd/display: Fix DP MST timeslot issue when fallback happened

[Greg Kroah-Hartman]

From: Cruise Hung <Cruise.Hung@amd.com>

[ Upstream commit 20c6168b3c8aadef7d2853c925d99eb546bd5e1c ]

[Why]
When USB4 DP link training failed and fell back to lower link rate,
the time slot calculation uses the verified_link_cap.
And the verified_link_cap was not updated to the new one.
It caused the wrong VC payload time-slot was allocated.

[How]
Updated verified_link_cap with the new one from cur_link_settings
after the LT completes successfully.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index 0c52506b367d..b4203a812c4b 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -2857,8 +2857,14 @@ bool perform_link_training_with_retries(
 						skip_video_pattern);
 
 				/* Transmit idle pattern once training successful. */
-				if (status == LINK_TRAINING_SUCCESS && !is_link_bw_low)
+				if (status == LINK_TRAINING_SUCCESS && !is_link_bw_low) {
 					dp_set_hw_test_pattern(link, &pipe_ctx->link_res, DP_TEST_PATTERN_VIDEO_MODE, NULL, 0);
+					/* Update verified link settings to current one
+					 * Because DPIA LT might fallback to lower link setting.
+					 */
+					link->verified_link_cap.link_rate = link->cur_link_settings.link_rate;
+					link->verified_link_cap.lane_count = link->cur_link_settings.lane_count;
+				}
 			} else {
 				status = dc_link_dp_perform_link_training(link,
 						&pipe_ctx->link_res,
-- 
2.35.1

[PATCH 5.19 34/48] drm/amd/display: increase dcn315 pstate change latency

[Greg Kroah-Hartman]

From: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>

[ Upstream commit dcc2527df918edfe297c5074ccc1f05eae361ca6 ]

[Why & How]
Update after new measurment came in

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../dc/clk_mgr/dcn315/dcn315_clk_mgr.c        | 22 ++++++++++++-------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c
index f4381725b210..c3d7712e9fd0 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c
@@ -46,6 +46,9 @@
 #define TO_CLK_MGR_DCN315(clk_mgr)\
 	container_of(clk_mgr, struct clk_mgr_dcn315, base)
 
+#define UNSUPPORTED_DCFCLK 10000000
+#define MIN_DPP_DISP_CLK     100000
+
 static int dcn315_get_active_display_cnt_wa(
 		struct dc *dc,
 		struct dc_state *context)
@@ -146,6 +149,9 @@ static void dcn315_update_clocks(struct clk_mgr *clk_mgr_base,
 		}
 	}
 
+	/* Lock pstate by requesting unsupported dcfclk if change is unsupported */
+	if (!new_clocks->p_state_change_support)
+		new_clocks->dcfclk_khz = UNSUPPORTED_DCFCLK;
 	if (should_set_clock(safe_to_lower, new_clocks->dcfclk_khz, clk_mgr_base->clks.dcfclk_khz)) {
 		clk_mgr_base->clks.dcfclk_khz = new_clocks->dcfclk_khz;
 		dcn315_smu_set_hard_min_dcfclk(clk_mgr, clk_mgr_base->clks.dcfclk_khz);
@@ -159,10 +165,10 @@ static void dcn315_update_clocks(struct clk_mgr *clk_mgr_base,
 
 	// workaround: Limit dppclk to 100Mhz to avoid lower eDP panel switch to plus 4K monitor underflow.
 	if (!IS_DIAG_DC(dc->ctx->dce_environment)) {
-		if (new_clocks->dppclk_khz < 100000)
-			new_clocks->dppclk_khz = 100000;
-		if (new_clocks->dispclk_khz < 100000)
-			new_clocks->dispclk_khz = 100000;
+		if (new_clocks->dppclk_khz < MIN_DPP_DISP_CLK)
+			new_clocks->dppclk_khz = MIN_DPP_DISP_CLK;
+		if (new_clocks->dispclk_khz < MIN_DPP_DISP_CLK)
+			new_clocks->dispclk_khz = MIN_DPP_DISP_CLK;
 	}
 
 	if (should_set_clock(safe_to_lower, new_clocks->dppclk_khz, clk_mgr->base.clks.dppclk_khz)) {
@@ -272,7 +278,7 @@ static struct wm_table ddr5_wm_table = {
 		{
 			.wm_inst = WM_A,
 			.wm_type = WM_TYPE_PSTATE_CHG,
-			.pstate_latency_us = 64.0,
+			.pstate_latency_us = 129.0,
 			.sr_exit_time_us = 11.5,
 			.sr_enter_plus_exit_time_us = 14.5,
 			.valid = true,
@@ -280,7 +286,7 @@ static struct wm_table ddr5_wm_table = {
 		{
 			.wm_inst = WM_B,
 			.wm_type = WM_TYPE_PSTATE_CHG,
-			.pstate_latency_us = 64.0,
+			.pstate_latency_us = 129.0,
 			.sr_exit_time_us = 11.5,
 			.sr_enter_plus_exit_time_us = 14.5,
 			.valid = true,
@@ -288,7 +294,7 @@ static struct wm_table ddr5_wm_table = {
 		{
 			.wm_inst = WM_C,
 			.wm_type = WM_TYPE_PSTATE_CHG,
-			.pstate_latency_us = 64.0,
+			.pstate_latency_us = 129.0,
 			.sr_exit_time_us = 11.5,
 			.sr_enter_plus_exit_time_us = 14.5,
 			.valid = true,
@@ -296,7 +302,7 @@ static struct wm_table ddr5_wm_table = {
 		{
 			.wm_inst = WM_D,
 			.wm_type = WM_TYPE_PSTATE_CHG,
-			.pstate_latency_us = 64.0,
+			.pstate_latency_us = 129.0,
 			.sr_exit_time_us = 11.5,
 			.sr_enter_plus_exit_time_us = 14.5,
 			.valid = true,
-- 
2.35.1

[PATCH 5.19 35/48] perf/x86/intel: Fix unchecked MSR access error for Alder Lake N

[Greg Kroah-Hartman]

From: Kan Liang <kan.liang@linux.intel.com>

[ Upstream commit 24919fdea6f8b31d7cdf32ac291bc5dd0b023878 ]

For some Alder Lake N machine, the below unchecked MSR access error may be
triggered.

[ 0.088017] rcu: Hierarchical SRCU implementation.
[ 0.088017] unchecked MSR access error: WRMSR to 0x38f (tried to write
0x0001000f0000003f) at rIP: 0xffffffffb5684de8 (native_write_msr+0x8/0x30)
[ 0.088017] Call Trace:
[ 0.088017] <TASK>
[ 0.088017] __intel_pmu_enable_all.constprop.46+0x4a/0xa0

The Alder Lake N only has e-cores. The X86_FEATURE_HYBRID_CPU flag is
not set. The perf cannot retrieve the correct CPU type via
get_this_hybrid_cpu_type(). The model specific get_hybrid_cpu_type() is
hardcode to p-core. The wrong CPU type is given to the PMU of the
Alder Lake N.

Since Alder Lake N isn't in fact a hybrid CPU, remove ALDERLAKE_N from
the rest of {ALDER,RAPTOP}LAKE and create a non-hybrid PMU setup.

The differences between Gracemont and the previous Tremont are,
- Number of GP counters
- Load and store latency Events
- PEBS event_constraints
- Instruction Latency support
- Data source encoding
- Memory access latency encoding

Fixes: c2a960f7c574 ("perf/x86: Add new Alder Lake and Raptor Lake support")
Reported-by: Jianfeng Gao <jianfeng.gao@intel.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220831142702.153110-1-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/intel/core.c | 40 +++++++++++++++++++++++++++++++++++-
 arch/x86/events/intel/ds.c   |  9 ++++++--
 arch/x86/events/perf_event.h |  2 ++
 3 files changed, 48 insertions(+), 3 deletions(-)

diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c
index bd8b98857609..8d6befb24b8e 100644
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -2101,6 +2101,15 @@ static struct extra_reg intel_tnt_extra_regs[] __read_mostly = {
 	EVENT_EXTRA_END
 };
 
+EVENT_ATTR_STR(mem-loads,	mem_ld_grt,	"event=0xd0,umask=0x5,ldlat=3");
+EVENT_ATTR_STR(mem-stores,	mem_st_grt,	"event=0xd0,umask=0x6");
+
+static struct attribute *grt_mem_attrs[] = {
+	EVENT_PTR(mem_ld_grt),
+	EVENT_PTR(mem_st_grt),
+	NULL
+};
+
 static struct extra_reg intel_grt_extra_regs[] __read_mostly = {
 	/* must define OFFCORE_RSP_X first, see intel_fixup_er() */
 	INTEL_UEVENT_EXTRA_REG(0x01b7, MSR_OFFCORE_RSP_0, 0x3fffffffffull, RSP_0),
@@ -5874,6 +5883,36 @@ __init int intel_pmu_init(void)
 		name = "Tremont";
 		break;
 
+	case INTEL_FAM6_ALDERLAKE_N:
+		x86_pmu.mid_ack = true;
+		memcpy(hw_cache_event_ids, glp_hw_cache_event_ids,
+		       sizeof(hw_cache_event_ids));
+		memcpy(hw_cache_extra_regs, tnt_hw_cache_extra_regs,
+		       sizeof(hw_cache_extra_regs));
+		hw_cache_event_ids[C(ITLB)][C(OP_READ)][C(RESULT_ACCESS)] = -1;
+
+		x86_pmu.event_constraints = intel_slm_event_constraints;
+		x86_pmu.pebs_constraints = intel_grt_pebs_event_constraints;
+		x86_pmu.extra_regs = intel_grt_extra_regs;
+
+		x86_pmu.pebs_aliases = NULL;
+		x86_pmu.pebs_prec_dist = true;
+		x86_pmu.pebs_block = true;
+		x86_pmu.lbr_pt_coexist = true;
+		x86_pmu.flags |= PMU_FL_HAS_RSP_1;
+		x86_pmu.flags |= PMU_FL_INSTR_LATENCY;
+
+		intel_pmu_pebs_data_source_grt();
+		x86_pmu.pebs_latency_data = adl_latency_data_small;
+		x86_pmu.get_event_constraints = tnt_get_event_constraints;
+		x86_pmu.limit_period = spr_limit_period;
+		td_attr = tnt_events_attrs;
+		mem_attr = grt_mem_attrs;
+		extra_attr = nhm_format_attr;
+		pr_cont("Gracemont events, ");
+		name = "gracemont";
+		break;
+
 	case INTEL_FAM6_WESTMERE:
 	case INTEL_FAM6_WESTMERE_EP:
 	case INTEL_FAM6_WESTMERE_EX:
@@ -6216,7 +6255,6 @@ __init int intel_pmu_init(void)
 
 	case INTEL_FAM6_ALDERLAKE:
 	case INTEL_FAM6_ALDERLAKE_L:
-	case INTEL_FAM6_ALDERLAKE_N:
 	case INTEL_FAM6_RAPTORLAKE:
 	case INTEL_FAM6_RAPTORLAKE_P:
 		/*
diff --git a/arch/x86/events/intel/ds.c b/arch/x86/events/intel/ds.c
index 9b48d957d2b3..139204aea94e 100644
--- a/arch/x86/events/intel/ds.c
+++ b/arch/x86/events/intel/ds.c
@@ -110,13 +110,18 @@ void __init intel_pmu_pebs_data_source_skl(bool pmem)
 	__intel_pmu_pebs_data_source_skl(pmem, pebs_data_source);
 }
 
-static void __init intel_pmu_pebs_data_source_grt(u64 *data_source)
+static void __init __intel_pmu_pebs_data_source_grt(u64 *data_source)
 {
 	data_source[0x05] = OP_LH | P(LVL, L3) | LEVEL(L3) | P(SNOOP, HIT);
 	data_source[0x06] = OP_LH | P(LVL, L3) | LEVEL(L3) | P(SNOOP, HITM);
 	data_source[0x08] = OP_LH | P(LVL, L3) | LEVEL(L3) | P(SNOOPX, FWD);
 }
 
+void __init intel_pmu_pebs_data_source_grt(void)
+{
+	__intel_pmu_pebs_data_source_grt(pebs_data_source);
+}
+
 void __init intel_pmu_pebs_data_source_adl(void)
 {
 	u64 *data_source;
@@ -127,7 +132,7 @@ void __init intel_pmu_pebs_data_source_adl(void)
 
 	data_source = x86_pmu.hybrid_pmu[X86_HYBRID_PMU_ATOM_IDX].pebs_data_source;
 	memcpy(data_source, pebs_data_source, sizeof(pebs_data_source));
-	intel_pmu_pebs_data_source_grt(data_source);
+	__intel_pmu_pebs_data_source_grt(data_source);
 }
 
 static u64 precise_store_data(u64 status)
diff --git a/arch/x86/events/perf_event.h b/arch/x86/events/perf_event.h
index 821098aebf78..84f6f947ddef 100644
--- a/arch/x86/events/perf_event.h
+++ b/arch/x86/events/perf_event.h
@@ -1513,6 +1513,8 @@ void intel_pmu_pebs_data_source_skl(bool pmem);
 
 void intel_pmu_pebs_data_source_adl(void);
 
+void intel_pmu_pebs_data_source_grt(void);
+
 int intel_pmu_setup_lbr_filter(struct perf_event *event);
 
 void intel_pt_interrupt(void);
-- 
2.35.1

[PATCH 5.19 36/48] [coredump] dont use __kernel_write() on kmap_local_page()

[Greg Kroah-Hartman]

From: Al Viro <viro@zeniv.linux.org.uk>

[ Upstream commit 06bbaa6dc53cb72040db952053432541acb9adc7 ]

passing kmap_local_page() result to __kernel_write() is unsafe -
random ->write_iter() might (and 9p one does) get unhappy when
passed ITER_KVEC with pointer that came from kmap_local_page().

Fix by providing a variant of __kernel_write() that takes an iov_iter
from caller (__kernel_write() becomes a trivial wrapper) and adding
dump_emit_page() that parallels dump_emit(), except that instead of
__kernel_write() it uses __kernel_write_iter() with ITER_BVEC source.

Fixes: 3159ed57792b "fs/coredump: use kmap_local_page()"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/coredump.c   | 38 +++++++++++++++++++++++++++++++++-----
 fs/internal.h   |  3 +++
 fs/read_write.c | 22 ++++++++++++++--------
 3 files changed, 50 insertions(+), 13 deletions(-)

diff --git a/fs/coredump.c b/fs/coredump.c
index ebc43f960b64..f1355e52614a 100644
--- a/fs/coredump.c
+++ b/fs/coredump.c
@@ -832,6 +832,38 @@ static int __dump_skip(struct coredump_params *cprm, size_t nr)
 	}
 }
 
+static int dump_emit_page(struct coredump_params *cprm, struct page *page)
+{
+	struct bio_vec bvec = {
+		.bv_page	= page,
+		.bv_offset	= 0,
+		.bv_len		= PAGE_SIZE,
+	};
+	struct iov_iter iter;
+	struct file *file = cprm->file;
+	loff_t pos = file->f_pos;
+	ssize_t n;
+
+	if (cprm->to_skip) {
+		if (!__dump_skip(cprm, cprm->to_skip))
+			return 0;
+		cprm->to_skip = 0;
+	}
+	if (cprm->written + PAGE_SIZE > cprm->limit)
+		return 0;
+	if (dump_interrupted())
+		return 0;
+	iov_iter_bvec(&iter, WRITE, &bvec, 1, PAGE_SIZE);
+	n = __kernel_write_iter(cprm->file, &iter, &pos);
+	if (n != PAGE_SIZE)
+		return 0;
+	file->f_pos = pos;
+	cprm->written += PAGE_SIZE;
+	cprm->pos += PAGE_SIZE;
+
+	return 1;
+}
+
 int dump_emit(struct coredump_params *cprm, const void *addr, int nr)
 {
 	if (cprm->to_skip) {
@@ -863,7 +895,6 @@ int dump_user_range(struct coredump_params *cprm, unsigned long start,
 
 	for (addr = start; addr < start + len; addr += PAGE_SIZE) {
 		struct page *page;
-		int stop;
 
 		/*
 		 * To avoid having to allocate page tables for virtual address
@@ -874,10 +905,7 @@ int dump_user_range(struct coredump_params *cprm, unsigned long start,
 		 */
 		page = get_dump_page(addr);
 		if (page) {
-			void *kaddr = kmap_local_page(page);
-
-			stop = !dump_emit(cprm, kaddr, PAGE_SIZE);
-			kunmap_local(kaddr);
+			int stop = !dump_emit_page(cprm, page);
 			put_page(page);
 			if (stop)
 				return 0;
diff --git a/fs/internal.h b/fs/internal.h
index 87e96b9024ce..3e206d3e317c 100644
--- a/fs/internal.h
+++ b/fs/internal.h
@@ -16,6 +16,7 @@ struct shrink_control;
 struct fs_context;
 struct user_namespace;
 struct pipe_inode_info;
+struct iov_iter;
 
 /*
  * block/bdev.c
@@ -221,3 +222,5 @@ ssize_t do_getxattr(struct user_namespace *mnt_userns,
 int setxattr_copy(const char __user *name, struct xattr_ctx *ctx);
 int do_setxattr(struct user_namespace *mnt_userns, struct dentry *dentry,
 		struct xattr_ctx *ctx);
+
+ssize_t __kernel_write_iter(struct file *file, struct iov_iter *from, loff_t *pos);
diff --git a/fs/read_write.c b/fs/read_write.c
index 397da0236607..a0a3d35e2c0f 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -509,14 +509,9 @@ static ssize_t new_sync_write(struct file *filp, const char __user *buf, size_t
 }
 
 /* caller is responsible for file_start_write/file_end_write */
-ssize_t __kernel_write(struct file *file, const void *buf, size_t count, loff_t *pos)
+ssize_t __kernel_write_iter(struct file *file, struct iov_iter *from, loff_t *pos)
 {
-	struct kvec iov = {
-		.iov_base	= (void *)buf,
-		.iov_len	= min_t(size_t, count, MAX_RW_COUNT),
-	};
 	struct kiocb kiocb;
-	struct iov_iter iter;
 	ssize_t ret;
 
 	if (WARN_ON_ONCE(!(file->f_mode & FMODE_WRITE)))
@@ -532,8 +527,7 @@ ssize_t __kernel_write(struct file *file, const void *buf, size_t count, loff_t
 
 	init_sync_kiocb(&kiocb, file);
 	kiocb.ki_pos = pos ? *pos : 0;
-	iov_iter_kvec(&iter, WRITE, &iov, 1, iov.iov_len);
-	ret = file->f_op->write_iter(&kiocb, &iter);
+	ret = file->f_op->write_iter(&kiocb, from);
 	if (ret > 0) {
 		if (pos)
 			*pos = kiocb.ki_pos;
@@ -543,6 +537,18 @@ ssize_t __kernel_write(struct file *file, const void *buf, size_t count, loff_t
 	inc_syscw(current);
 	return ret;
 }
+
+/* caller is responsible for file_start_write/file_end_write */
+ssize_t __kernel_write(struct file *file, const void *buf, size_t count, loff_t *pos)
+{
+	struct kvec iov = {
+		.iov_base	= (void *)buf,
+		.iov_len	= min_t(size_t, count, MAX_RW_COUNT),
+	};
+	struct iov_iter iter;
+	iov_iter_kvec(&iter, WRITE, &iov, 1, iov.iov_len);
+	return __kernel_write_iter(file, &iter, pos);
+}
 /*
  * This "EXPORT_SYMBOL_GPL()" is more of a "EXPORT_SYMBOL_DONTUSE()",
  * but autofs is one of the few internal kernel users that actually
-- 
2.35.1

[PATCH 5.19 37/48] i2c: davinci: fix PM disable depth imbalance in davinci_i2c_probe

[Greg Kroah-Hartman]

From: Zhang Qilong <zhangqilong3@huawei.com>

[ Upstream commit e2062df704dea47efe16edcaa2316d7b5ecca64f ]

The pm_runtime_enable will increase power disable depth. Thus a
pairing decrement is needed on the error handling path to keep
it balanced according to context.

Fixes: 17f88151ff190 ("i2c: davinci: Add PM Runtime Support")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-davinci.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 9e09db31a937..5343c82c8594 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -823,7 +823,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 	r = pm_runtime_resume_and_get(dev->dev);
 	if (r < 0) {
 		dev_err(dev->dev, "failed to runtime_get device: %d\n", r);
-		return r;
+		goto err_pm;
 	}
 
 	i2c_davinci_init(dev);
@@ -882,6 +882,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 err_unuse_clocks:
 	pm_runtime_dont_use_autosuspend(dev->dev);
 	pm_runtime_put_sync(dev->dev);
+err_pm:
 	pm_runtime_disable(dev->dev);
 
 	return r;
-- 
2.35.1

[PATCH 5.19 38/48] usb: mon: make mmapped memory read only

[Greg Kroah-Hartman]

From: Tadeusz Struk <tadeusz.struk@linaro.org>

commit a659daf63d16aa883be42f3f34ff84235c302198 upstream.

Syzbot found an issue in usbmon module, where the user space client can
corrupt the monitor's internal memory, causing the usbmon module to
crash the kernel with segfault, UAF, etc.

The reproducer mmaps the /dev/usbmon memory to user space, and
overwrites it with arbitrary data, which causes all kinds of issues.

Return an -EPERM error from mon_bin_mmap() if the flag VM_WRTIE is set.
Also clear VM_MAYWRITE to make it impossible to change it to writable
later.

Cc: "Dmitry Vyukov" <dvyukov@google.com>
Cc: stable <stable@kernel.org>
Fixes: 6f23ee1fefdc ("USB: add binary API to usbmon")
Suggested-by: PaX Team <pageexec@freemail.hu>	# for the VM_MAYRITE portion
Link: https://syzkaller.appspot.com/bug?id=2eb1f35d6525fa4a74d75b4244971e5b1411c95a
Reported-by: syzbot+23f57c5ae902429285d7@syzkaller.appspotmail.com
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Link: https://lore.kernel.org/r/20220919215957.205681-1-tadeusz.struk@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/mon/mon_bin.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -1268,6 +1268,11 @@ static int mon_bin_mmap(struct file *fil
 {
 	/* don't do anything here: "fault" will set up page table entries */
 	vma->vm_ops = &mon_bin_vm_ops;
+
+	if (vma->vm_flags & VM_WRITE)
+		return -EPERM;
+
+	vma->vm_flags &= ~VM_MAYWRITE;
 	vma->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP;
 	vma->vm_private_data = filp->private_data;
 	mon_bin_vma_open(vma);

[PATCH 5.19 39/48] USB: serial: ftdi_sio: fix 300 bps rate for SIO

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 7bd7ad3c310cd6766f170927381eea0aa6f46c69 upstream.

The 300 bps rate of SIO devices has been mapped to 9600 bps since
2003... Let's fix the regression.

Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/ftdi_sio.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1319,8 +1319,7 @@ static u32 get_ftdi_divisor(struct tty_s
 		case 38400: div_value = ftdi_sio_b38400; break;
 		case 57600: div_value = ftdi_sio_b57600;  break;
 		case 115200: div_value = ftdi_sio_b115200; break;
-		} /* baud */
-		if (div_value == 0) {
+		default:
 			dev_dbg(dev, "%s - Baudrate (%d) requested is not supported\n",
 				__func__,  baud);
 			div_value = ftdi_sio_b9600;

[PATCH 5.19 40/48] gpiolib: acpi: Add support to ignore programming an interrupt

[Greg Kroah-Hartman]

From: Mario Limonciello <mario.limonciello@amd.com>

commit 6b6af7bd5718f4e45a9b930533aec1158387d552 upstream.

gpiolib-acpi already had support for ignoring a pin for wakeup, but
if an OEM configures a floating pin as an interrupt source then
stopping it from being a wakeup won't do much good to stop the
interrupt storm.

Add support for a module parameter and quirk infrastructure to
ignore interrupts as well.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpio/gpiolib-acpi.c |   24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -32,9 +32,16 @@ MODULE_PARM_DESC(ignore_wake,
 		 "controller@pin combos on which to ignore the ACPI wake flag "
 		 "ignore_wake=controller@pin[,controller@pin[,...]]");
 
+static char *ignore_interrupt;
+module_param(ignore_interrupt, charp, 0444);
+MODULE_PARM_DESC(ignore_interrupt,
+		 "controller@pin combos on which to ignore interrupt "
+		 "ignore_interrupt=controller@pin[,controller@pin[,...]]");
+
 struct acpi_gpiolib_dmi_quirk {
 	bool no_edge_events_on_boot;
 	char *ignore_wake;
+	char *ignore_interrupt;
 };
 
 /**
@@ -317,14 +324,15 @@ static struct gpio_desc *acpi_request_ow
 	return desc;
 }
 
-static bool acpi_gpio_in_ignore_list(const char *controller_in, unsigned int pin_in)
+static bool acpi_gpio_in_ignore_list(const char *ignore_list, const char *controller_in,
+				     unsigned int pin_in)
 {
 	const char *controller, *pin_str;
 	unsigned int pin;
 	char *endp;
 	int len;
 
-	controller = ignore_wake;
+	controller = ignore_list;
 	while (controller) {
 		pin_str = strchr(controller, '@');
 		if (!pin_str)
@@ -348,7 +356,7 @@ static bool acpi_gpio_in_ignore_list(con
 
 	return false;
 err:
-	pr_err_once("Error: Invalid value for gpiolib_acpi.ignore_wake: %s\n", ignore_wake);
+	pr_err_once("Error: Invalid value for gpiolib_acpi.ignore_...: %s\n", ignore_list);
 	return false;
 }
 
@@ -360,7 +368,7 @@ static bool acpi_gpio_irq_is_wake(struct
 	if (agpio->wake_capable != ACPI_WAKE_CAPABLE)
 		return false;
 
-	if (acpi_gpio_in_ignore_list(dev_name(parent), pin)) {
+	if (acpi_gpio_in_ignore_list(ignore_wake, dev_name(parent), pin)) {
 		dev_info(parent, "Ignoring wakeup on pin %u\n", pin);
 		return false;
 	}
@@ -427,6 +435,11 @@ static acpi_status acpi_gpiochip_alloc_e
 		goto fail_unlock_irq;
 	}
 
+	if (acpi_gpio_in_ignore_list(ignore_interrupt, dev_name(chip->parent), pin)) {
+		dev_info(chip->parent, "Ignoring interrupt on pin %u\n", pin);
+		return AE_OK;
+	}
+
 	event = kzalloc(sizeof(*event), GFP_KERNEL);
 	if (!event)
 		goto fail_unlock_irq;
@@ -1582,6 +1595,9 @@ static int __init acpi_gpio_setup_params
 	if (ignore_wake == NULL && quirk && quirk->ignore_wake)
 		ignore_wake = quirk->ignore_wake;
 
+	if (ignore_interrupt == NULL && quirk && quirk->ignore_interrupt)
+		ignore_interrupt = quirk->ignore_interrupt;
+
 	return 0;
 }
 

[PATCH 5.19 41/48] gpiolib: acpi: Add a quirk for Asus UM325UAZ

[Greg Kroah-Hartman]

From: Mario Limonciello <mario.limonciello@amd.com>

commit 0ea76c401f9245ac209f1b1ce03a7e1fb9de36e5 upstream.

Asus UM325UAZ has GPIO 18 programmed as both an interrupt and a wake
source, but confirmed with internal team on this design this pin is
floating and shouldn't have been programmed. This causes lots of
spurious IRQs on the system and horrendous battery life.

Add a quirk to ignore attempts to program this pin on this system.

Reported-by: Pavel Krc <reg.krn@pkrc.net>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216208
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpio/gpiolib-acpi.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -1573,6 +1573,20 @@ static const struct dmi_system_id gpioli
 			.ignore_wake = "INT33FF:01@0",
 		},
 	},
+	{
+		/*
+		 * Interrupt storm caused from edge triggered floating pin
+		 * Found in BIOS UX325UAZ.300
+		 * https://bugzilla.kernel.org/show_bug.cgi?id=216208
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX325UAZ_UM325UAZ"),
+		},
+		.driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+			.ignore_interrupt = "AMDI0030:00@18",
+		},
+	},
 	{} /* Terminating entry */
 };
 

[PATCH 5.19 42/48] mmc: core: Replace with already defined values for readability

[Greg Kroah-Hartman]

From: ChanWoo Lee <cw9316.lee@samsung.com>

commit e427266460826bea21b70f9b2bb29decfb2c2620 upstream.

SD_ROCR_S18A is already defined and is used to check the rocr value, so
let's replace with already defined values for readability.

Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220706004840.24812-1-cw9316.lee@samsung.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/core/sd.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -870,7 +870,7 @@ try_again:
 	 * the CCS bit is set as well. We deliberately deviate from the spec in
 	 * regards to this, which allows UHS-I to be supported for SDSC cards.
 	 */
-	if (!mmc_host_is_spi(host) && rocr && (*rocr & 0x01000000)) {
+	if (!mmc_host_is_spi(host) && rocr && (*rocr & SD_ROCR_S18A)) {
 		err = mmc_set_uhs_voltage(host, pocr);
 		if (err == -EAGAIN) {
 			retries--;

[PATCH 5.19 43/48] mmc: core: Terminate infinite loop in SD-UHS voltage switch

[Greg Kroah-Hartman]

From: Brian Norris <briannorris@chromium.org>

commit e9233917a7e53980664efbc565888163c0a33c3f upstream.

This loop intends to retry a max of 10 times, with some implicit
termination based on the SD_{R,}OCR_S18A bit. Unfortunately, the
termination condition depends on the value reported by the SD card
(*rocr), which may or may not correctly reflect what we asked it to do.

Needless to say, it's not wise to rely on the card doing what we expect;
we should at least terminate the loop regardless. So, check both the
input and output values, so we ensure we will terminate regardless of
the SD card behavior.

Note that SDIO learned a similar retry loop in commit 0797e5f1453b
("mmc: core: Fixup signal voltage switch"), but that used the 'ocr'
result, and so the current pre-terminating condition looks like:

    rocr & ocr & R4_18V_PRESENT

(i.e., it doesn't have the same bug.)

This addresses a number of crash reports seen on ChromeOS that look
like the following:

    ... // lots of repeated: ...
    <4>[13142.846061] mmc1: Skipping voltage switch
    <4>[13143.406087] mmc1: Skipping voltage switch
    <4>[13143.964724] mmc1: Skipping voltage switch
    <4>[13144.526089] mmc1: Skipping voltage switch
    <4>[13145.086088] mmc1: Skipping voltage switch
    <4>[13145.645941] mmc1: Skipping voltage switch
    <3>[13146.153969] INFO: task halt:30352 blocked for more than 122 seconds.
    ...

Fixes: f2119df6b764 ("mmc: sd: add support for signal voltage switch procedure")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220914014010.2076169-1-briannorris@chromium.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/core/sd.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -870,7 +870,8 @@ try_again:
 	 * the CCS bit is set as well. We deliberately deviate from the spec in
 	 * regards to this, which allows UHS-I to be supported for SDSC cards.
 	 */
-	if (!mmc_host_is_spi(host) && rocr && (*rocr & SD_ROCR_S18A)) {
+	if (!mmc_host_is_spi(host) && (ocr & SD_OCR_S18R) &&
+	    rocr && (*rocr & SD_ROCR_S18A)) {
 		err = mmc_set_uhs_voltage(host, pocr);
 		if (err == -EAGAIN) {
 			retries--;

[PATCH 5.19 44/48] rpmsg: qcom: glink: replace strncpy() with strscpy_pad()

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

commit 766279a8f85df32345dbda03b102ca1ee3d5ddea upstream.

The use of strncpy() is considered deprecated for NUL-terminated
strings[1]. Replace strncpy() with strscpy_pad(), to keep existing
pad-behavior of strncpy, similarly to commit 08de420a8014 ("rpmsg:
glink: Replace strncpy() with strscpy_pad()").  This fixes W=1 warning:

  In function ‘qcom_glink_rx_close’,
    inlined from ‘qcom_glink_work’ at ../drivers/rpmsg/qcom_glink_native.c:1638:4:
  drivers/rpmsg/qcom_glink_native.c:1549:17: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
   1549 |                 strncpy(chinfo.name, channel->name, sizeof(chinfo.name));

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220519073330.7187-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Andrew Chernyakov <acherniakov@astralinux.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rpmsg/qcom_glink_native.c |    2 +-
 drivers/rpmsg/qcom_smd.c          |    4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/rpmsg/qcom_glink_native.c
+++ b/drivers/rpmsg/qcom_glink_native.c
@@ -1546,7 +1546,7 @@ static void qcom_glink_rx_close(struct q
 	cancel_work_sync(&channel->intent_work);
 
 	if (channel->rpdev) {
-		strncpy(chinfo.name, channel->name, sizeof(chinfo.name));
+		strscpy_pad(chinfo.name, channel->name, sizeof(chinfo.name));
 		chinfo.src = RPMSG_ADDR_ANY;
 		chinfo.dst = RPMSG_ADDR_ANY;
 
--- a/drivers/rpmsg/qcom_smd.c
+++ b/drivers/rpmsg/qcom_smd.c
@@ -1089,7 +1089,7 @@ static int qcom_smd_create_device(struct
 
 	/* Assign public information to the rpmsg_device */
 	rpdev = &qsdev->rpdev;
-	strncpy(rpdev->id.name, channel->name, RPMSG_NAME_SIZE);
+	strscpy_pad(rpdev->id.name, channel->name, RPMSG_NAME_SIZE);
 	rpdev->src = RPMSG_ADDR_ANY;
 	rpdev->dst = RPMSG_ADDR_ANY;
 
@@ -1323,7 +1323,7 @@ static void qcom_channel_state_worker(st
 
 		spin_unlock_irqrestore(&edge->channels_lock, flags);
 
-		strncpy(chinfo.name, channel->name, sizeof(chinfo.name));
+		strscpy_pad(chinfo.name, channel->name, sizeof(chinfo.name));
 		chinfo.src = RPMSG_ADDR_ANY;
 		chinfo.dst = RPMSG_ADDR_ANY;
 		rpmsg_unregister_device(&edge->dev, &chinfo);

[PATCH 5.19 45/48] bpf: Gate dynptr API behind CAP_BPF

[Greg Kroah-Hartman]

From: Kumar Kartikeya Dwivedi <memxor@gmail.com>

commit 8addbfc7b308d591f8a5f2f6bb24d08d9d79dfbb upstream.

This has been enabled for unprivileged programs for only one kernel
release, hence the expected annoyances due to this move are low. Users
using ringbuf can stick to non-dynptr APIs. The actual use cases dynptr
is meant to serve may not make sense in unprivileged BPF programs.

Hence, gate these helpers behind CAP_BPF and limit use to privileged
BPF programs.

Fixes: 263ae152e962 ("bpf: Add bpf_dynptr_from_mem for local dynptrs")
Fixes: bc34dee65a65 ("bpf: Dynptr support for ring buffers")
Fixes: 13bbbfbea759 ("bpf: Add bpf_dynptr_read and bpf_dynptr_write")
Fixes: 34d4ef5775f7 ("bpf: Add dynptr data slices")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220921143550.30247-1-memxor@gmail.com
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/bpf/helpers.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/kernel/bpf/helpers.c b/kernel/bpf/helpers.c
index 1f961f9982d2..3814b0fd3a2c 100644
--- a/kernel/bpf/helpers.c
+++ b/kernel/bpf/helpers.c
@@ -1627,26 +1627,12 @@ bpf_base_func_proto(enum bpf_func_id func_id)
 		return &bpf_ringbuf_discard_proto;
 	case BPF_FUNC_ringbuf_query:
 		return &bpf_ringbuf_query_proto;
-	case BPF_FUNC_ringbuf_reserve_dynptr:
-		return &bpf_ringbuf_reserve_dynptr_proto;
-	case BPF_FUNC_ringbuf_submit_dynptr:
-		return &bpf_ringbuf_submit_dynptr_proto;
-	case BPF_FUNC_ringbuf_discard_dynptr:
-		return &bpf_ringbuf_discard_dynptr_proto;
 	case BPF_FUNC_for_each_map_elem:
 		return &bpf_for_each_map_elem_proto;
 	case BPF_FUNC_loop:
 		return &bpf_loop_proto;
 	case BPF_FUNC_strncmp:
 		return &bpf_strncmp_proto;
-	case BPF_FUNC_dynptr_from_mem:
-		return &bpf_dynptr_from_mem_proto;
-	case BPF_FUNC_dynptr_read:
-		return &bpf_dynptr_read_proto;
-	case BPF_FUNC_dynptr_write:
-		return &bpf_dynptr_write_proto;
-	case BPF_FUNC_dynptr_data:
-		return &bpf_dynptr_data_proto;
 	default:
 		break;
 	}
@@ -1675,6 +1661,20 @@ bpf_base_func_proto(enum bpf_func_id func_id)
 		return &bpf_timer_cancel_proto;
 	case BPF_FUNC_kptr_xchg:
 		return &bpf_kptr_xchg_proto;
+	case BPF_FUNC_ringbuf_reserve_dynptr:
+		return &bpf_ringbuf_reserve_dynptr_proto;
+	case BPF_FUNC_ringbuf_submit_dynptr:
+		return &bpf_ringbuf_submit_dynptr_proto;
+	case BPF_FUNC_ringbuf_discard_dynptr:
+		return &bpf_ringbuf_discard_dynptr_proto;
+	case BPF_FUNC_dynptr_from_mem:
+		return &bpf_dynptr_from_mem_proto;
+	case BPF_FUNC_dynptr_read:
+		return &bpf_dynptr_read_proto;
+	case BPF_FUNC_dynptr_write:
+		return &bpf_dynptr_write_proto;
+	case BPF_FUNC_dynptr_data:
+		return &bpf_dynptr_data_proto;
 	default:
 		break;
 	}
-- 
2.38.0

[PATCH 5.19 46/48] net: ethernet: mtk_eth_soc: fix state in __mtk_foe_entry_clear

[Greg Kroah-Hartman]

From: Daniel Golle <daniel@makrotopia.org>

commit ae3ed15da5889263de372ff9df2e83e16acca4cb upstream.

Setting ib1 state to MTK_FOE_STATE_UNBIND in __mtk_foe_entry_clear
routine as done by commit 0e80707d94e4c8 ("net: ethernet: mtk_eth_soc:
fix typo in __mtk_foe_entry_clear") breaks flow offloading, at least
on older MTK_NETSYS_V1 SoCs, OpenWrt users have confirmed the bug on
MT7622 and MT7621 systems.
Felix Fietkau suggested to use MTK_FOE_STATE_INVALID instead which
works well on both, MTK_NETSYS_V1 and MTK_NETSYS_V2.

Tested on MT7622 (Linksys E8450) and MT7986 (BananaPi BPI-R3).

Suggested-by: Felix Fietkau <nbd@nbd.name>
Fixes: 0e80707d94e4c8 ("net: ethernet: mtk_eth_soc: fix typo in __mtk_foe_entry_clear")
Fixes: 33fc42de33278b ("net: ethernet: mtk_eth_soc: support creating mac address based offload entries")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/YzY+1Yg0FBXcnrtc@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mediatek/mtk_ppe.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/mediatek/mtk_ppe.c
+++ b/drivers/net/ethernet/mediatek/mtk_ppe.c
@@ -412,7 +412,7 @@ __mtk_foe_entry_clear(struct mtk_ppe *pp
 	if (entry->hash != 0xffff) {
 		ppe->foe_table[entry->hash].ib1 &= ~MTK_FOE_IB1_STATE;
 		ppe->foe_table[entry->hash].ib1 |= FIELD_PREP(MTK_FOE_IB1_STATE,
-							      MTK_FOE_STATE_UNBIND);
+							      MTK_FOE_STATE_INVALID);
 		dma_wmb();
 	}
 	entry->hash = 0xffff;

[PATCH 5.19 47/48] bpf: Fix resetting logic for unreferenced kptrs

[Greg Kroah-Hartman]

From: Jules Irenge <jbi.octave@gmail.com>

commit 9fad7fe5b29803584c7f17a2abe6c2936fec6828 upstream.

Sparse reported a warning at bpf_map_free_kptrs()
"warning: Using plain integer as NULL pointer"
During the process of fixing this warning, it was discovered that the current
code erroneously writes to the pointer variable instead of deferencing and
writing to the actual kptr. Hence, Sparse tool accidentally helped to uncover
this problem. Fix this by doing WRITE_ONCE(*p, 0) instead of WRITE_ONCE(p, 0).

Note that the effect of this bug is that unreferenced kptrs will not be cleared
during check_and_free_fields. It is not a problem if the clearing is not done
during map_free stage, as there is nothing to free for them.

Fixes: 14a324f6a67e ("bpf: Wire up freeing of referenced kptr")
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Link: https://lore.kernel.org/r/Yxi3pJaK6UDjVJSy@playground
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/bpf/syscall.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -578,7 +578,7 @@ void bpf_map_free_kptrs(struct bpf_map *
 		if (off_desc->type == BPF_KPTR_UNREF) {
 			u64 *p = (u64 *)btf_id_ptr;
 
-			WRITE_ONCE(p, 0);
+			WRITE_ONCE(*p, 0);
 			continue;
 		}
 		old_ptr = xchg(btf_id_ptr, 0);

[PATCH 5.19 48/48] Bluetooth: use hdev->workqueue when queuing hdev->{cmd,ncmd}_timer works

[Greg Kroah-Hartman]

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

commit deee93d13d385103205879a8a0915036ecd83261 upstream.

syzbot is reporting attempt to schedule hdev->cmd_work work from system_wq
WQ into hdev->workqueue WQ which is under draining operation [1], for
commit c8efcc2589464ac7 ("workqueue: allow chained queueing during
destruction") does not allow such operation.

The check introduced by commit 877afadad2dce8aa ("Bluetooth: When HCI work
queue is drained, only queue chained work") was incomplete.

Use hdev->workqueue WQ when queuing hdev->{cmd,ncmd}_timer works because
hci_{cmd,ncmd}_timeout() calls queue_work(hdev->workqueue). Also, protect
the queuing operation with RCU read lock in order to avoid calling
queue_delayed_work() after cancel_delayed_work() completed.

Link: https://syzkaller.appspot.com/bug?extid=243b7d89777f90f7613b [1]
Reported-by: syzbot <syzbot+243b7d89777f90f7613b@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 877afadad2dce8aa ("Bluetooth: When HCI work queue is drained, only queue chained work")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bluetooth/hci_core.c  |   15 +++++++++++++--
 net/bluetooth/hci_event.c |    6 ++++--
 2 files changed, 17 insertions(+), 4 deletions(-)

--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -596,6 +596,15 @@ static int hci_dev_do_reset(struct hci_d
 
 	/* Cancel these to avoid queueing non-chained pending work */
 	hci_dev_set_flag(hdev, HCI_CMD_DRAIN_WORKQUEUE);
+	/* Wait for
+	 *
+	 *    if (!hci_dev_test_flag(hdev, HCI_CMD_DRAIN_WORKQUEUE))
+	 *        queue_delayed_work(&hdev->{cmd,ncmd}_timer)
+	 *
+	 * inside RCU section to see the flag or complete scheduling.
+	 */
+	synchronize_rcu();
+	/* Explicitly cancel works in case scheduled after setting the flag. */
 	cancel_delayed_work(&hdev->cmd_timer);
 	cancel_delayed_work(&hdev->ncmd_timer);
 
@@ -3871,12 +3880,14 @@ static void hci_cmd_work(struct work_str
 			if (res < 0)
 				__hci_cmd_sync_cancel(hdev, -res);
 
+			rcu_read_lock();
 			if (test_bit(HCI_RESET, &hdev->flags) ||
 			    hci_dev_test_flag(hdev, HCI_CMD_DRAIN_WORKQUEUE))
 				cancel_delayed_work(&hdev->cmd_timer);
 			else
-				schedule_delayed_work(&hdev->cmd_timer,
-						      HCI_CMD_TIMEOUT);
+				queue_delayed_work(hdev->workqueue, &hdev->cmd_timer,
+						   HCI_CMD_TIMEOUT);
+			rcu_read_unlock();
 		} else {
 			skb_queue_head(&hdev->cmd_q, skb);
 			queue_work(hdev->workqueue, &hdev->cmd_work);
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -3763,16 +3763,18 @@ static inline void handle_cmd_cnt_and_ti
 {
 	cancel_delayed_work(&hdev->cmd_timer);
 
+	rcu_read_lock();
 	if (!test_bit(HCI_RESET, &hdev->flags)) {
 		if (ncmd) {
 			cancel_delayed_work(&hdev->ncmd_timer);
 			atomic_set(&hdev->cmd_cnt, 1);
 		} else {
 			if (!hci_dev_test_flag(hdev, HCI_CMD_DRAIN_WORKQUEUE))
-				schedule_delayed_work(&hdev->ncmd_timer,
-						      HCI_NCMD_TIMEOUT);
+				queue_delayed_work(hdev->workqueue, &hdev->ncmd_timer,
+						   HCI_NCMD_TIMEOUT);
 		}
 	}
+	rcu_read_unlock();
 }
 
 #define HCI_CC_VL(_op, _func, _min, _max) \

Re: [PATCH 5.19 00/48] 5.19.15-rc1 review

[Naresh Kamboju]

On Mon, 10 Oct 2022 at 12:36, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.19.15 release.
> There are 48 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 12 Oct 2022 07:03:19 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.19.15-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h


Results from Linaro's test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

NOTE:
1) Build warning which were reported on last round of stable rc review

Following build warning found on few arm configs which do not set Kconfig
# CONFIG_ELF_CORE is not set

- powerpc: tqm8xx_defconfig
- arm: keystone_defconfig and omap1_defconfig
- mips: ar7_defconfig
fs/coredump.c:835:12: warning: 'dump_emit_page' defined but not used
[-Wunused-function]
  835 | static int dump_emit_page(struct coredump_params *cprm, struct
page *page)
      |            ^~~~~~~~~~~~~~

## Build
* kernel: 5.19.15-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.19.y
* git commit: 2e79dbde2710b3939943c5d2ea3028329b820e9f
* git describe: v5.19.14-49-g2e79dbde2710
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.19.y/build/v5.19.14-49-g2e79dbde2710

## Test Regressions (compared to v5.19.12-110-g30c780ac0f9f)

## Metric Regressions (compared to v5.19.12-110-g30c780ac0f9f)

## Test Fixes (compared to v5.19.12-110-g30c780ac0f9f)

## Metric Fixes (compared to v5.19.12-110-g30c780ac0f9f)

## Test result summary
total: 112321, pass: 100742, fail: 732, skip: 10568, xfail: 279

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 339 total, 336 passed, 3 failed
* arm64: 72 total, 70 passed, 2 failed
* i386: 61 total, 55 passed, 6 failed
* mips: 62 total, 59 passed, 3 failed
* parisc: 14 total, 14 passed, 0 failed
* powerpc: 75 total, 66 passed, 9 failed
* riscv: 32 total, 27 passed, 5 failed
* s390: 26 total, 24 passed, 2 failed
* sh: 26 total, 24 passed, 2 failed
* sparc: 14 total, 14 passed, 0 failed
* x86_64: 65 total, 63 passed, 2 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-open-posix-tests
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* packetdrill
* rcutorture
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.19 00/48] 5.19.15-rc1 review

[Justin Forbes]

On Mon, Oct 10, 2022 at 09:04:58AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.19.15 release.
> There are 48 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 12 Oct 2022 07:03:19 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.19.15-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

Tested rc1 against the Fedora build system (aarch64, armv7, ppc64le,
s390x, x86_64), and boot tested x86_64. No regressions noted.

Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>

Re: [PATCH 5.19 00/48] 5.19.15-rc1 review

[Florian Fainelli]

On 10/10/22 00:04, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.19.15 release.
> There are 48 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 12 Oct 2022 07:03:19 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.19.15-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on 
BMIPS_GENERIC:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 5.19 00/48] 5.19.15-rc1 review

[Shuah Khan]

On 10/10/22 01:04, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.19.15 release.
> There are 48 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 12 Oct 2022 07:03:19 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.19.15-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 5.19 00/48] 5.19.15-rc1 review

[Bagas Sanjaya]

[-- Attachment #1: Type: text/plain, Size: 538 bytes --]

On Mon, Oct 10, 2022 at 09:04:58AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.19.15 release.
> There are 48 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 

Successfully cross-compiled for arm64 (bcm2711_defconfig, GCC 10.2.0) and
powerpc (ps3_defconfig, GCC 12.1.0).

Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>

-- 
An old man doll... just what I always wanted! - Clara

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]