From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
patches@lists.linux.dev, Duke Xin <duke_xinanwen@163.com>,
Johan Hovold <johan@kernel.org>
Subject: [PATCH 6.1 13/25] USB: serial: option: add Quectel EM05-G modem
Date: Mon, 19 Dec 2022 20:22:52 +0100 [thread overview]
Message-ID: <20221219182943.951801310@linuxfoundation.org> (raw)
In-Reply-To: <20221219182943.395169070@linuxfoundation.org>
From: Duke Xin <duke_xinanwen@163.com>
commit f0052d7a1edb3d8921b4e154aa8c46c4845b3714 upstream.
The EM05-G modem has 2 USB configurations that are configurable via the AT
command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with
the following interfaces, respectively:
"RMNET" : AT + DIAG + NMEA + Modem + QMI
"MBIM" : MBIM + AT + DIAG + NMEA + Modem
The detailed description of the USB configuration for each mode as follows:
RMNET Mode
--------------
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0311 Rev= 3.18
S: Manufacturer=Quectel
S: Product=Quectel EM05-G
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
MBIM Mode
--------------
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0311 Rev= 3.18
S: Manufacturer=Quectel
S: Product=Quectel EM05-G
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Duke Xin <duke_xinanwen@163.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -255,6 +255,7 @@ static void option_instat_callback(struc
#define QUECTEL_PRODUCT_EP06 0x0306
#define QUECTEL_PRODUCT_EM05G 0x030a
#define QUECTEL_PRODUCT_EM060K 0x030b
+#define QUECTEL_PRODUCT_EM05G_SG 0x0311
#define QUECTEL_PRODUCT_EM12 0x0512
#define QUECTEL_PRODUCT_RM500Q 0x0800
#define QUECTEL_PRODUCT_RM520N 0x0801
@@ -1160,6 +1161,8 @@ static const struct usb_device_id option
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) },
{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G, 0xff),
.driver_info = RSVD(6) | ZLP },
+ { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_SG, 0xff),
+ .driver_info = RSVD(6) | ZLP },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0x00, 0x40) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x30) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x40) },
next prev parent reply other threads:[~2022-12-19 19:25 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-19 19:22 [PATCH 6.1 00/25] 6.1.1-rc1 review Greg Kroah-Hartman
2022-12-19 19:22 ` [PATCH 6.1 01/25] x86/vdso: Conditionally export __vdso_sgx_enter_enclave() Greg Kroah-Hartman
2022-12-19 19:22 ` [PATCH 6.1 02/25] libbpf: Fix uninitialized warning in btf_dump_dump_type_data Greg Kroah-Hartman
2022-12-19 19:22 ` [PATCH 6.1 03/25] PCI: mt7621: Add sentinel to quirks table Greg Kroah-Hartman
2022-12-19 19:22 ` [PATCH 6.1 04/25] mips: ralink: mt7621: define MT7621_SYSC_BASE with __iomem Greg Kroah-Hartman
2022-12-19 19:22 ` [PATCH 6.1 05/25] mips: ralink: mt7621: soc queries and tests as functions Greg Kroah-Hartman
2022-12-19 19:22 ` [PATCH 6.1 06/25] mips: ralink: mt7621: do not use kzalloc too early Greg Kroah-Hartman
2022-12-19 19:22 ` [PATCH 6.1 07/25] irqchip/ls-extirq: Fix endianness detection Greg Kroah-Hartman
2022-12-19 19:22 ` [PATCH 6.1 08/25] udf: Discard preallocation before extending file with a hole Greg Kroah-Hartman
2022-12-19 19:22 ` [PATCH 6.1 09/25] udf: Fix preallocation discarding at indirect extent boundary Greg Kroah-Hartman
2022-12-19 19:22 ` [PATCH 6.1 10/25] udf: Do not bother looking for prealloc extents if i_lenExtents matches i_size Greg Kroah-Hartman
2022-12-19 19:22 ` [PATCH 6.1 11/25] udf: Fix extending file within last block Greg Kroah-Hartman
2022-12-19 19:22 ` [PATCH 6.1 12/25] usb: gadget: uvc: Prevent buffer overflow in setup handler Greg Kroah-Hartman
2022-12-19 19:22 ` Greg Kroah-Hartman [this message]
2022-12-19 19:22 ` [PATCH 6.1 14/25] USB: serial: cp210x: add Kamstrup RF sniffer PIDs Greg Kroah-Hartman
2022-12-19 19:22 ` [PATCH 6.1 15/25] USB: serial: f81232: fix division by zero on line-speed change Greg Kroah-Hartman
2022-12-19 19:22 ` [PATCH 6.1 16/25] USB: serial: f81534: " Greg Kroah-Hartman
2022-12-19 19:22 ` [PATCH 6.1 17/25] ALSA: hda/realtek: fix mute/micmute LEDs for a HP ProBook Greg Kroah-Hartman
2022-12-19 19:22 ` [PATCH 6.1 18/25] xhci: Apply XHCI_RESET_TO_DEFAULT quirk to ADL-N Greg Kroah-Hartman
2022-12-19 19:22 ` [PATCH 6.1 19/25] staging: r8188eu: fix led register settings Greg Kroah-Hartman
2022-12-19 19:22 ` [PATCH 6.1 20/25] igb: Initialize mailbox message for VF reset Greg Kroah-Hartman
2022-12-19 19:23 ` [PATCH 6.1 21/25] usb: typec: ucsi: Resume in separate work Greg Kroah-Hartman
2022-12-19 19:23 ` [PATCH 6.1 22/25] usb: dwc3: pci: Update PCIe device ID for USB3 controller on CPU sub-system for Raptor Lake Greg Kroah-Hartman
2022-12-19 19:23 ` [PATCH 6.1 23/25] cifs: fix oops during encryption Greg Kroah-Hartman
2022-12-19 19:23 ` [PATCH 6.1 24/25] KEYS: encrypted: fix key instantiation with user-provided data Greg Kroah-Hartman
2022-12-19 19:23 ` [PATCH 6.1 25/25] usb: ulpi: defer ulpi_register on ulpi_read_id timeout Greg Kroah-Hartman
2022-12-20 0:15 ` [PATCH 6.1 00/25] 6.1.1-rc1 review Shuah Khan
2022-12-20 0:21 ` Florian Fainelli
2022-12-20 4:45 ` Bagas Sanjaya
2022-12-20 7:41 ` Ron Economos
2022-12-20 9:20 ` Rudi Heitbaum
2022-12-20 10:51 ` Naresh Kamboju
2022-12-20 12:26 ` Sudip Mukherjee (Codethink)
2022-12-20 14:31 ` Sudip Mukherjee
2022-12-21 18:19 ` Greg Kroah-Hartman
2022-12-20 15:00 ` Guenter Roeck
2022-12-20 15:10 ` Greg Kroah-Hartman
2022-12-20 16:11 ` Guenter Roeck
2022-12-21 6:34 ` Jiri Slaby
2022-12-21 18:20 ` Greg Kroah-Hartman
2022-12-22 8:07 ` Thorsten Leemhuis
2022-12-21 16:12 ` Greg Kroah-Hartman
2022-12-20 18:57 ` Allen Pais
2022-12-21 1:13 ` Slade Watkins
2022-12-21 16:18 ` Justin Forbes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221219182943.951801310@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=duke_xinanwen@163.com \
--cc=johan@kernel.org \
--cc=patches@lists.linux.dev \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).