public inbox for stable@vger.kernel.org
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	patches@lists.linux.dev,
	Ryusuke Konishi <konishi.ryusuke@gmail.com>,
	syzbot+ede796cecd5296353515@syzkaller.appspotmail.com,
	Andrew Morton <akpm@linux-foundation.org>
Subject: [PATCH 4.14 05/25] nilfs2: fix general protection fault in nilfs_btree_insert()
Date: Sun, 22 Jan 2023 16:04:05 +0100	[thread overview]
Message-ID: <20230122150218.034798906@linuxfoundation.org> (raw)
In-Reply-To: <20230122150217.788215473@linuxfoundation.org>

From: Ryusuke Konishi <konishi.ryusuke@gmail.com>

commit 7633355e5c7f29c049a9048e461427d1d8ed3051 upstream.

If nilfs2 reads a corrupted disk image and tries to reads a b-tree node
block by calling __nilfs_btree_get_block() against an invalid virtual
block address, it returns -ENOENT because conversion of the virtual block
address to a disk block address fails.  However, this return value is the
same as the internal code that b-tree lookup routines return to indicate
that the block being searched does not exist, so functions that operate on
that b-tree may misbehave.

When nilfs_btree_insert() receives this spurious 'not found' code from
nilfs_btree_do_lookup(), it misunderstands that the 'not found' check was
successful and continues the insert operation using incomplete lookup path
data, causing the following crash:

 general protection fault, probably for non-canonical address
 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN
 KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
 ...
 RIP: 0010:nilfs_btree_get_nonroot_node fs/nilfs2/btree.c:418 [inline]
 RIP: 0010:nilfs_btree_prepare_insert fs/nilfs2/btree.c:1077 [inline]
 RIP: 0010:nilfs_btree_insert+0x6d3/0x1c10 fs/nilfs2/btree.c:1238
 Code: bc 24 80 00 00 00 4c 89 f8 48 c1 e8 03 42 80 3c 28 00 74 08 4c 89
 ff e8 4b 02 92 fe 4d 8b 3f 49 83 c7 28 4c 89 f8 48 c1 e8 03 <42> 80 3c
 28 00 74 08 4c 89 ff e8 2e 02 92 fe 4d 8b 3f 49 83 c7 02
 ...
 Call Trace:
 <TASK>
  nilfs_bmap_do_insert fs/nilfs2/bmap.c:121 [inline]
  nilfs_bmap_insert+0x20d/0x360 fs/nilfs2/bmap.c:147
  nilfs_get_block+0x414/0x8d0 fs/nilfs2/inode.c:101
  __block_write_begin_int+0x54c/0x1a80 fs/buffer.c:1991
  __block_write_begin fs/buffer.c:2041 [inline]
  block_write_begin+0x93/0x1e0 fs/buffer.c:2102
  nilfs_write_begin+0x9c/0x110 fs/nilfs2/inode.c:261
  generic_perform_write+0x2e4/0x5e0 mm/filemap.c:3772
  __generic_file_write_iter+0x176/0x400 mm/filemap.c:3900
  generic_file_write_iter+0xab/0x310 mm/filemap.c:3932
  call_write_iter include/linux/fs.h:2186 [inline]
  new_sync_write fs/read_write.c:491 [inline]
  vfs_write+0x7dc/0xc50 fs/read_write.c:584
  ksys_write+0x177/0x2a0 fs/read_write.c:637
  do_syscall_x64 arch/x86/entry/common.c:50 [inline]
  do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
 ...
 </TASK>

This patch fixes the root cause of this problem by replacing the error
code that __nilfs_btree_get_block() returns on block address conversion
failure from -ENOENT to another internal code -EINVAL which means that the
b-tree metadata is corrupted.

By returning -EINVAL, it propagates without glitches, and for all relevant
b-tree operations, functions in the upper bmap layer output an error
message indicating corrupted b-tree metadata via
nilfs_bmap_convert_error(), and code -EIO will be eventually returned as
it should be.

Link: https://lkml.kernel.org/r/000000000000bd89e205f0e38355@google.com
Link: https://lkml.kernel.org/r/20230105055356.8811-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+ede796cecd5296353515@syzkaller.appspotmail.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nilfs2/btree.c |   15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

--- a/fs/nilfs2/btree.c
+++ b/fs/nilfs2/btree.c
@@ -489,9 +489,18 @@ static int __nilfs_btree_get_block(const
 	ret = nilfs_btnode_submit_block(btnc, ptr, 0, REQ_OP_READ, 0, &bh,
 					&submit_ptr);
 	if (ret) {
-		if (ret != -EEXIST)
-			return ret;
-		goto out_check;
+		if (likely(ret == -EEXIST))
+			goto out_check;
+		if (ret == -ENOENT) {
+			/*
+			 * Block address translation failed due to invalid
+			 * value of 'ptr'.  In this case, return internal code
+			 * -EINVAL (broken bmap) to notify bmap layer of fatal
+			 * metadata corruption.
+			 */
+			ret = -EINVAL;
+		}
+		return ret;
 	}
 
 	if (ra) {



  parent reply	other threads:[~2023-01-22 15:06 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-22 15:04 [PATCH 4.14 00/25] 4.14.304-rc1 review Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 01/25] pNFS/filelayout: Fix coalescing test for single DS Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 02/25] net/ethtool/ioctl: return -EOPNOTSUPP if we have no phy stats Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 03/25] RDMA/srp: Move large values to a new enum for gcc13 Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 04/25] f2fs: lets avoid panic if extent_tree is not created Greg Kroah-Hartman
2023-01-22 15:04 ` Greg Kroah-Hartman [this message]
2023-01-22 15:04 ` [PATCH 4.14 06/25] xhci-pci: set the dma max_seg_size Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 07/25] usb: xhci: Check endpoint is valid before dereferencing it Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 08/25] prlimit: do_prlimit needs to have a speculation check Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 09/25] USB: serial: option: add Quectel EM05-G (GR) modem Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 10/25] USB: serial: option: add Quectel EM05-G (CS) modem Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 11/25] USB: serial: option: add Quectel EM05-G (RS) modem Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 12/25] USB: serial: option: add Quectel EC200U modem Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 13/25] USB: serial: option: add Quectel EM05CN (SG) modem Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 14/25] USB: serial: option: add Quectel EM05CN modem Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 15/25] USB: misc: iowarrior: fix up header size for USB_DEVICE_ID_CODEMERCS_IOW100 Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 16/25] usb: core: hub: disable autosuspend for TI TUSB8041 Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 17/25] USB: serial: cp210x: add SCALANCE LPE-9000 device id Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 18/25] usb: host: ehci-fsl: Fix module alias Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 19/25] usb: gadget: g_webcam: Send color matching descriptor per frame Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 20/25] usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate() Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 21/25] usb-storage: apply IGNORE_UAS only for HIKSEMI MD202 on RTL9210 Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 22/25] serial: pch_uart: Pass correct sg to dma_unmap_sg() Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 23/25] serial: atmel: fix incorrect baudrate setup Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 24/25] gsmi: fix null-deref in gsmi_get_variable Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 25/25] x86/fpu: Use _Alignof to avoid undefined behavior in TYPE_ALIGN Greg Kroah-Hartman
2023-01-23 10:20 ` [PATCH 4.14 00/25] 4.14.304-rc1 review Naresh Kamboju
2023-01-24  2:43 ` Guenter Roeck
2023-01-25 10:34 ` Jon Hunter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230122150218.034798906@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=akpm@linux-foundation.org \
    --cc=konishi.ryusuke@gmail.com \
    --cc=patches@lists.linux.dev \
    --cc=stable@vger.kernel.org \
    --cc=syzbot+ede796cecd5296353515@syzkaller.appspotmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox