public inbox for stable@vger.kernel.org
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	patches@lists.linux.dev, "Duke Xin " <duke_xinanwen@163.com>,
	"Johan Hovold" <johan@kernel.org>
Subject: [PATCH 4.14 09/25] USB: serial: option: add Quectel EM05-G (GR) modem
Date: Sun, 22 Jan 2023 16:04:09 +0100	[thread overview]
Message-ID: <20230122150218.187159435@linuxfoundation.org> (raw)
In-Reply-To: <20230122150217.788215473@linuxfoundation.org>

From: Duke Xin(辛安文) <duke_xinanwen@163.com>

commit 6c331f32e32ac71eb3e8b93fceda2802d7ecb889 upstream.

The EM05-G (GR) modem has 2 USB configurations that are configurable via
the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate
with the following interfaces, respectively:

"RMNET" : AT + DIAG + NMEA + Modem + QMI
"MBIM"  : MBIM + AT + DIAG + NMEA + Modem

The detailed description of the USB configuration for each mode as follows:

RMNET Mode
--------------
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=0313 Rev= 3.18
S:  Manufacturer=Quectel
S:  Product=Quectel EM05-G
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=89(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

MBIM Mode
--------------
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=0313 Rev= 3.18
S:  Manufacturer=Quectel
S:  Product=Quectel EM05-G
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=89(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -259,6 +259,7 @@ static void option_instat_callback(struc
 #define QUECTEL_PRODUCT_EM05G			0x030a
 #define QUECTEL_PRODUCT_EM060K			0x030b
 #define QUECTEL_PRODUCT_EM05G_SG		0x0311
+#define QUECTEL_PRODUCT_EM05G_GR		0x0313
 #define QUECTEL_PRODUCT_EM12			0x0512
 #define QUECTEL_PRODUCT_RM500Q			0x0800
 #define QUECTEL_PRODUCT_RM520N			0x0801
@@ -1164,6 +1165,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) },
 	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G, 0xff),
 	  .driver_info = RSVD(6) | ZLP },
+	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_GR, 0xff),
+	  .driver_info = RSVD(6) | ZLP },
 	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_SG, 0xff),
 	  .driver_info = RSVD(6) | ZLP },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0x00, 0x40) },



  parent reply	other threads:[~2023-01-22 15:07 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-22 15:04 [PATCH 4.14 00/25] 4.14.304-rc1 review Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 01/25] pNFS/filelayout: Fix coalescing test for single DS Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 02/25] net/ethtool/ioctl: return -EOPNOTSUPP if we have no phy stats Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 03/25] RDMA/srp: Move large values to a new enum for gcc13 Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 04/25] f2fs: lets avoid panic if extent_tree is not created Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 05/25] nilfs2: fix general protection fault in nilfs_btree_insert() Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 06/25] xhci-pci: set the dma max_seg_size Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 07/25] usb: xhci: Check endpoint is valid before dereferencing it Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 08/25] prlimit: do_prlimit needs to have a speculation check Greg Kroah-Hartman
2023-01-22 15:04 ` Greg Kroah-Hartman [this message]
2023-01-22 15:04 ` [PATCH 4.14 10/25] USB: serial: option: add Quectel EM05-G (CS) modem Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 11/25] USB: serial: option: add Quectel EM05-G (RS) modem Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 12/25] USB: serial: option: add Quectel EC200U modem Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 13/25] USB: serial: option: add Quectel EM05CN (SG) modem Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 14/25] USB: serial: option: add Quectel EM05CN modem Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 15/25] USB: misc: iowarrior: fix up header size for USB_DEVICE_ID_CODEMERCS_IOW100 Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 16/25] usb: core: hub: disable autosuspend for TI TUSB8041 Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 17/25] USB: serial: cp210x: add SCALANCE LPE-9000 device id Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 18/25] usb: host: ehci-fsl: Fix module alias Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 19/25] usb: gadget: g_webcam: Send color matching descriptor per frame Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 20/25] usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate() Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 21/25] usb-storage: apply IGNORE_UAS only for HIKSEMI MD202 on RTL9210 Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 22/25] serial: pch_uart: Pass correct sg to dma_unmap_sg() Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 23/25] serial: atmel: fix incorrect baudrate setup Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 24/25] gsmi: fix null-deref in gsmi_get_variable Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 25/25] x86/fpu: Use _Alignof to avoid undefined behavior in TYPE_ALIGN Greg Kroah-Hartman
2023-01-23 10:20 ` [PATCH 4.14 00/25] 4.14.304-rc1 review Naresh Kamboju
2023-01-24  2:43 ` Guenter Roeck
2023-01-25 10:34 ` Jon Hunter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230122150218.187159435@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=duke_xinanwen@163.com \
    --cc=johan@kernel.org \
    --cc=patches@lists.linux.dev \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox