From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Geert Uytterhoeven <geert+renesas@glider.be>,
Shawn Guo <shawnguo@kernel.org>, Sasha Levin <sashal@kernel.org>,
leoyang.li@nxp.com, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, eagle.zhou@nxp.com,
ming.qian@nxp.com, shijie.qin@nxp.com,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: [PATCH AUTOSEL 5.15 03/14] arm64: dts: freescale: Fix pca954x i2c-mux node names
Date: Tue, 24 Jan 2023 08:42:46 -0500 [thread overview]
Message-ID: <20230124134257.637523-3-sashal@kernel.org> (raw)
In-Reply-To: <20230124134257.637523-1-sashal@kernel.org>
From: Geert Uytterhoeven <geert+renesas@glider.be>
[ Upstream commit b025b4f5c288e29bbea421613a5b4eacf9261fbb ]
"make dtbs_check":
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547@77: $nodename:0: 'pca9547@77' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547@77: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@4' were unexpected)
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
...
Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts | 2 +-
arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts | 4 ++--
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 2 +-
12 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
index e22c5e77fecd..9615f3b9ee60 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
@@ -110,7 +110,7 @@ &esdhc1 {
&i2c0 {
status = "okay";
- pca9547@77 {
+ i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
index fea167d222cf..14856bc79b22 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -70,7 +70,7 @@ fpga: board-control@2,0 {
&i2c0 {
status = "okay";
- pca9547@77 {
+ i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
index eec62c63dafe..9ee9928f71b4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -76,7 +76,7 @@ &duart1 {
&i2c0 {
status = "okay";
- pca9547@77 {
+ i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
index 41d8b15f25a5..aa52ff73ff9e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -53,7 +53,7 @@ flash@2 {
&i2c0 {
status = "okay";
- i2c-switch@77 {
+ i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 1bfbce69cc8b..ee8e932628d1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -136,7 +136,7 @@ mdio2_aquantia_phy: ethernet-phy@0 {
&i2c0 {
status = "okay";
- i2c-switch@77 {
+ i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
index d3f03dcbb8c3..a9c6682a3955 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
@@ -245,7 +245,7 @@ rx8035: rtc@32 {
&i2c3 {
status = "okay";
- i2c-switch@70 {
+ i2c-mux@70 {
compatible = "nxp,pca9540";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
index 10d2fe091965..8d96d18c3697 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -44,7 +44,7 @@ cpld@3,0 {
&i2c0 {
status = "okay";
- pca9547@77 {
+ i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
index 4b71c4fcb35f..787e408da002 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -44,7 +44,7 @@ cpld@3,0 {
&i2c0 {
status = "okay";
- pca9547@75 {
+ i2c-mux@75 {
compatible = "nxp,pca9547";
reg = <0x75>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
index afb455210bd0..d32a52ab00a4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
@@ -54,7 +54,7 @@ &esdhc1 {
&i2c0 {
status = "okay";
- i2c-switch@77 {
+ i2c-mux@77 {
compatible = "nxp,pca9547";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
index 74c09891600f..6357078185ed 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
@@ -214,7 +214,7 @@ &i2c3 {
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
- i2cmux@70 {
+ i2c-mux@70 {
compatible = "nxp,pca9540";
reg = <0x70>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
index f70fb32b96b0..cf14ab5f7404 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
@@ -133,7 +133,7 @@ &i2c1 {
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- i2cmux@70 {
+ i2c-mux@70 {
compatible = "nxp,pca9546";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_pca9546>;
@@ -216,7 +216,7 @@ &i2c4 {
pinctrl-0 = <&pinctrl_i2c4>;
status = "okay";
- pca9546: i2cmux@70 {
+ pca9546: i2c-mux@70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 863232a47004..4497763d57cc 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -61,7 +61,7 @@ &i2c1 {
pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>;
status = "okay";
- i2c-switch@71 {
+ i2c-mux@71 {
compatible = "nxp,pca9646", "nxp,pca9546";
#address-cells = <1>;
#size-cells = <0>;
--
2.39.0
next prev parent reply other threads:[~2023-01-24 13:44 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-24 13:42 [PATCH AUTOSEL 5.15 01/14] ARM: dts: imx: Fix pca9547 i2c-mux node name Sasha Levin
2023-01-24 13:42 ` [PATCH AUTOSEL 5.15 02/14] ARM: dts: vf610: Fix pca9548 i2c-mux node names Sasha Levin
2023-01-24 13:42 ` Sasha Levin [this message]
2023-01-24 13:42 ` [PATCH AUTOSEL 5.15 04/14] arm64: dts: imx8mq-thor96: fix no-mmc property for SDHCI Sasha Levin
2023-01-24 13:42 ` [PATCH AUTOSEL 5.15 05/14] firmware: arm_scmi: Clear stale xfer->hdr.status Sasha Levin
2023-01-24 13:42 ` [PATCH AUTOSEL 5.15 06/14] bpf: Skip task with pid=1 in send_signal_common() Sasha Levin
2023-01-24 13:42 ` [PATCH AUTOSEL 5.15 07/14] erofs/zmap.c: Fix incorrect offset calculation Sasha Levin
2023-01-24 13:42 ` [PATCH AUTOSEL 5.15 08/14] init/Kconfig: fix LOCALVERSION_AUTO help text Sasha Levin
2023-01-24 13:42 ` [PATCH AUTOSEL 5.15 09/14] btrfs: factor out scratching of one regular super block Sasha Levin
2023-01-24 13:44 ` Christoph Hellwig
2023-01-24 13:42 ` [PATCH AUTOSEL 5.15 10/14] blk-cgroup: fix missing pd_online_fn() while activating policy Sasha Levin
2023-01-24 13:42 ` [PATCH AUTOSEL 5.15 11/14] HID: playstation: sanity check DualSense calibration data Sasha Levin
2023-01-24 13:42 ` [PATCH AUTOSEL 5.15 12/14] dmaengine: imx-sdma: Fix a possible memory leak in sdma_transfer_init Sasha Levin
2023-01-24 13:42 ` [PATCH AUTOSEL 5.15 13/14] cifs: fix return of uninitialized rc in dfs_cache_update_tgthint() Sasha Levin
2023-01-24 13:42 ` [PATCH AUTOSEL 5.15 14/14] ext4: deal with legacy signed xattr name hash values Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230124134257.637523-3-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=eagle.zhou@nxp.com \
--cc=geert+renesas@glider.be \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ming.qian@nxp.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=shijie.qin@nxp.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox