From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
patches@lists.linux.dev,
Geert Uytterhoeven <geert+renesas@glider.be>,
Shawn Guo <shawnguo@kernel.org>, Sasha Levin <sashal@kernel.org>
Subject: [PATCH 6.1 03/28] arm64: dts: freescale: Fix pca954x i2c-mux node names
Date: Fri, 3 Feb 2023 11:12:51 +0100 [thread overview]
Message-ID: <20230203101010.120524672@linuxfoundation.org> (raw)
In-Reply-To: <20230203101009.946745030@linuxfoundation.org>
From: Geert Uytterhoeven <geert+renesas@glider.be>
[ Upstream commit b025b4f5c288e29bbea421613a5b4eacf9261fbb ]
"make dtbs_check":
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547@77: $nodename:0: 'pca9547@77' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547@77: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@4' were unexpected)
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
...
Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts | 2 +-
arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts | 4 ++--
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 2 +-
12 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
index 5a8d85a7d161..bbdf989058ff 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
@@ -110,7 +110,7 @@ &esdhc1 {
&i2c0 {
status = "okay";
- pca9547@77 {
+ i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
index 9b726c2a4842..dda27ed7aaf2 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -89,7 +89,7 @@ fpga: board-control@2,0 {
&i2c0 {
status = "okay";
- pca9547@77 {
+ i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
index b2fcbba60d3a..3b0ed9305f2b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -88,7 +88,7 @@ &duart1 {
&i2c0 {
status = "okay";
- pca9547@77 {
+ i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
index 41d8b15f25a5..aa52ff73ff9e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -53,7 +53,7 @@ flash@2 {
&i2c0 {
status = "okay";
- i2c-switch@77 {
+ i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 1bfbce69cc8b..ee8e932628d1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -136,7 +136,7 @@ mdio2_aquantia_phy: ethernet-phy@0 {
&i2c0 {
status = "okay";
- i2c-switch@77 {
+ i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
index ef6c8967533e..d4867d6cf47c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
@@ -245,7 +245,7 @@ rx8035: rtc@32 {
&i2c3 {
status = "okay";
- i2c-switch@70 {
+ i2c-mux@70 {
compatible = "nxp,pca9540";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
index f598669e742f..52c5a43b30a0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -103,7 +103,7 @@ mdio0_phy15: mdio-phy3@1f {
&i2c0 {
status = "okay";
- pca9547@77 {
+ i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
index 3d9647b3da14..537cecb13dd0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -44,7 +44,7 @@ cpld@3,0 {
&i2c0 {
status = "okay";
- pca9547@75 {
+ i2c-mux@75 {
compatible = "nxp,pca9547";
reg = <0x75>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
index afb455210bd0..d32a52ab00a4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
@@ -54,7 +54,7 @@ &esdhc1 {
&i2c0 {
status = "okay";
- i2c-switch@77 {
+ i2c-mux@77 {
compatible = "nxp,pca9547";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
index 74c09891600f..6357078185ed 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
@@ -214,7 +214,7 @@ &i2c3 {
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
- i2cmux@70 {
+ i2c-mux@70 {
compatible = "nxp,pca9540";
reg = <0x70>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
index 9dda2a1554c3..8614c18b5998 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
@@ -133,7 +133,7 @@ &i2c1 {
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- i2cmux@70 {
+ i2c-mux@70 {
compatible = "nxp,pca9546";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_pca9546>;
@@ -216,7 +216,7 @@ &i2c4 {
pinctrl-0 = <&pinctrl_i2c4>;
status = "okay";
- pca9546: i2cmux@70 {
+ pca9546: i2c-mux@70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 07d8dd8160f6..afa883389456 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -61,7 +61,7 @@ &i2c1 {
pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>;
status = "okay";
- i2c-switch@71 {
+ i2c-mux@71 {
compatible = "nxp,pca9646", "nxp,pca9546";
#address-cells = <1>;
#size-cells = <0>;
--
2.39.0
next prev parent reply other threads:[~2023-02-03 10:27 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-03 10:12 [PATCH 6.1 00/28] 6.1.10-rc1 review Greg Kroah-Hartman
2023-02-03 10:12 ` [PATCH 6.1 01/28] ARM: dts: imx: Fix pca9547 i2c-mux node name Greg Kroah-Hartman
2023-02-03 10:12 ` [PATCH 6.1 02/28] ARM: dts: vf610: Fix pca9548 i2c-mux node names Greg Kroah-Hartman
2023-02-03 10:12 ` Greg Kroah-Hartman [this message]
2023-02-03 10:12 ` [PATCH 6.1 04/28] arm64: dts: imx8mq-thor96: fix no-mmc property for SDHCI Greg Kroah-Hartman
2023-02-03 10:12 ` [PATCH 6.1 05/28] firmware: arm_scmi: Clear stale xfer->hdr.status Greg Kroah-Hartman
2023-02-03 10:12 ` [PATCH 6.1 06/28] bpf: Skip task with pid=1 in send_signal_common() Greg Kroah-Hartman
2023-02-03 10:12 ` [PATCH 6.1 07/28] erofs/zmap.c: Fix incorrect offset calculation Greg Kroah-Hartman
2023-02-03 10:12 ` [PATCH 6.1 08/28] mac80211: Fix MLO address translation for multiple bss case Greg Kroah-Hartman
2023-02-03 10:12 ` [PATCH 6.1 09/28] arm64: dts: msm8994-angler: fix the memory map Greg Kroah-Hartman
2023-02-03 10:12 ` [PATCH 6.1 10/28] ARM: omap1: fix building gpio15xx Greg Kroah-Hartman
2023-02-03 10:12 ` [PATCH 6.1 11/28] kselftest: Fix error message for unconfigured LLVM builds Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 6.1 12/28] erofs: clean up parsing of fscache related options Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 6.1 13/28] blk-cgroup: fix missing pd_online_fn() while activating policy Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 6.1 14/28] LoongArch: Get frame info in unwind_start() when regs is not available Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 6.1 15/28] ACPI: video: Add backlight=native DMI quirk for Acer Aspire 4810T Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 6.1 16/28] block: fix hctx checks for batch allocation Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 6.1 17/28] s390: workaround invalid gcc-11 out of bounds read warning Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 6.1 18/28] HID: uclogic: Add support for XP-PEN Deco 01 V2 Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 6.1 19/28] HID: playstation: sanity check DualSense calibration data Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 6.1 20/28] dmaengine: imx-sdma: Fix a possible memory leak in sdma_transfer_init Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 6.1 21/28] gpiolib: acpi: Allow ignoring wake capability on pins that arent in _AEI Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 6.1 22/28] cifs: fix return of uninitialized rc in dfs_cache_update_tgthint() Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 6.1 23/28] nvme-apple: only reset the controller when RTKit is running Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 6.1 24/28] gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xRU Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 6.1 25/28] gpiolib-acpi: Dont set GPIOs for wakeup in S3 mode Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 6.1 26/28] net: fix NULL pointer in skb_segment_list Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 6.1 27/28] rust: print: avoid evaluating arguments in `pr_*` macros in `unsafe` blocks Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 6.1 28/28] net: mctp: purge receive queues on sk destruction Greg Kroah-Hartman
2023-02-03 13:58 ` [PATCH 6.1 00/28] 6.1.10-rc1 review ogasawara takeshi
2023-02-03 18:02 ` Justin Forbes
2023-02-03 20:16 ` Florian Fainelli
2023-02-03 22:34 ` Ron Economos
2023-02-04 0:49 ` Shuah Khan
2023-02-04 1:51 ` Guenter Roeck
2023-02-04 3:28 ` Bagas Sanjaya
2023-02-04 7:25 ` Naresh Kamboju
2023-02-05 19:51 ` Nathan Chancellor
2023-02-06 14:12 ` Naresh Kamboju
2023-02-04 7:27 ` Fenil Jain
2023-02-04 23:45 ` Rudi Heitbaum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230203101010.120524672@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=geert+renesas@glider.be \
--cc=patches@lists.linux.dev \
--cc=sashal@kernel.org \
--cc=shawnguo@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).