From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: "José Expósito" <jose.exposito89@gmail.com>,
"Mia Kanashi" <chad@redpilled.dev>,
"Andreas Grosse" <andig.mail@t-online.de>,
"Jiri Kosina" <jkosina@suse.cz>,
"Sasha Levin" <sashal@kernel.org>,
jikos@kernel.org, benjamin.tissoires@redhat.com,
linux-input@vger.kernel.org
Subject: [PATCH AUTOSEL 6.2 19/60] HID: uclogic: Add frame type quirk
Date: Sun, 26 Feb 2023 21:00:04 -0500 [thread overview]
Message-ID: <20230227020045.1045105-19-sashal@kernel.org> (raw)
In-Reply-To: <20230227020045.1045105-1-sashal@kernel.org>
From: José Expósito <jose.exposito89@gmail.com>
[ Upstream commit 14b71e6ad8ca59dd734c7fa9676f3d60bddee2a9 ]
The report descriptor used to get information about UGEE v2 devices is
incorrect in the XP-PEN Deco Pro SW. It indicates that the device frame
is of type UCLOGIC_PARAMS_FRAME_BUTTONS but the device has a frame of
type UCLOGIC_PARAMS_FRAME_MOUSE.
Here is the original report descriptor:
0x0e 0x03 0xc8 0xb3 0x34 0x65 0x08 0x00 0xff 0x1f 0xd8 0x13 0x00 0x00
^ This byte should be 2
Add a quirk to be able to fix the reported frame type.
Tested-by: Mia Kanashi <chad@redpilled.dev>
Tested-by: Andreas Grosse <andig.mail@t-online.de>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/hid-uclogic-core.c | 20 +-------------------
drivers/hid/hid-uclogic-params.c | 5 +++++
drivers/hid/hid-uclogic-params.h | 23 +++++++++++++++++++++++
3 files changed, 29 insertions(+), 19 deletions(-)
diff --git a/drivers/hid/hid-uclogic-core.c b/drivers/hid/hid-uclogic-core.c
index cfbbc39807a69..739984b8fa1b8 100644
--- a/drivers/hid/hid-uclogic-core.c
+++ b/drivers/hid/hid-uclogic-core.c
@@ -22,25 +22,6 @@
#include "hid-ids.h"
-/* Driver data */
-struct uclogic_drvdata {
- /* Interface parameters */
- struct uclogic_params params;
- /* Pointer to the replacement report descriptor. NULL if none. */
- __u8 *desc_ptr;
- /*
- * Size of the replacement report descriptor.
- * Only valid if desc_ptr is not NULL
- */
- unsigned int desc_size;
- /* Pen input device */
- struct input_dev *pen_input;
- /* In-range timer */
- struct timer_list inrange_timer;
- /* Last rotary encoder state, or U8_MAX for none */
- u8 re_state;
-};
-
/**
* uclogic_inrange_timeout - handle pen in-range state timeout.
* Emulate input events normally generated when pen goes out of range for
@@ -202,6 +183,7 @@ static int uclogic_probe(struct hid_device *hdev,
}
timer_setup(&drvdata->inrange_timer, uclogic_inrange_timeout, 0);
drvdata->re_state = U8_MAX;
+ drvdata->quirks = id->driver_data;
hid_set_drvdata(hdev, drvdata);
/* Initialize the device and retrieve interface parameters */
diff --git a/drivers/hid/hid-uclogic-params.c b/drivers/hid/hid-uclogic-params.c
index 3c5eea3df3288..e052538a62fb3 100644
--- a/drivers/hid/hid-uclogic-params.c
+++ b/drivers/hid/hid-uclogic-params.c
@@ -1298,6 +1298,7 @@ static int uclogic_params_ugee_v2_init(struct uclogic_params *params,
struct hid_device *hdev)
{
int rc = 0;
+ struct uclogic_drvdata *drvdata;
struct usb_interface *iface;
__u8 bInterfaceNumber;
const int str_desc_len = 12;
@@ -1316,6 +1317,7 @@ static int uclogic_params_ugee_v2_init(struct uclogic_params *params,
goto cleanup;
}
+ drvdata = hid_get_drvdata(hdev);
iface = to_usb_interface(hdev->dev.parent);
bInterfaceNumber = iface->cur_altsetting->desc.bInterfaceNumber;
@@ -1382,6 +1384,9 @@ static int uclogic_params_ugee_v2_init(struct uclogic_params *params,
p.pen.subreport_list[0].id = UCLOGIC_RDESC_V1_FRAME_ID;
/* Initialize the frame interface */
+ if (drvdata->quirks & UCLOGIC_MOUSE_FRAME_QUIRK)
+ frame_type = UCLOGIC_PARAMS_FRAME_MOUSE;
+
switch (frame_type) {
case UCLOGIC_PARAMS_FRAME_DIAL:
case UCLOGIC_PARAMS_FRAME_MOUSE:
diff --git a/drivers/hid/hid-uclogic-params.h b/drivers/hid/hid-uclogic-params.h
index a97477c02ff82..10a05c7fd9398 100644
--- a/drivers/hid/hid-uclogic-params.h
+++ b/drivers/hid/hid-uclogic-params.h
@@ -19,6 +19,8 @@
#include <linux/usb.h>
#include <linux/hid.h>
+#define UCLOGIC_MOUSE_FRAME_QUIRK BIT(0)
+
/* Types of pen in-range reporting */
enum uclogic_params_pen_inrange {
/* Normal reports: zero - out of proximity, one - in proximity */
@@ -215,6 +217,27 @@ struct uclogic_params {
struct uclogic_params_frame frame_list[3];
};
+/* Driver data */
+struct uclogic_drvdata {
+ /* Interface parameters */
+ struct uclogic_params params;
+ /* Pointer to the replacement report descriptor. NULL if none. */
+ __u8 *desc_ptr;
+ /*
+ * Size of the replacement report descriptor.
+ * Only valid if desc_ptr is not NULL
+ */
+ unsigned int desc_size;
+ /* Pen input device */
+ struct input_dev *pen_input;
+ /* In-range timer */
+ struct timer_list inrange_timer;
+ /* Last rotary encoder state, or U8_MAX for none */
+ u8 re_state;
+ /* Device quirks */
+ unsigned long quirks;
+};
+
/* Initialize a tablet interface and discover its parameters */
extern int uclogic_params_init(struct uclogic_params *params,
struct hid_device *hdev);
--
2.39.0
next prev parent reply other threads:[~2023-02-27 2:11 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-27 1:59 [PATCH AUTOSEL 6.2 01/60] drm: panel-orientation-quirks: Add quirk for Lenovo Yoga Tab 3 X90F Sasha Levin
2023-02-27 1:59 ` [PATCH AUTOSEL 6.2 02/60] drm: panel-orientation-quirks: Add quirk for DynaBook K50 Sasha Levin
2023-02-27 1:59 ` [PATCH AUTOSEL 6.2 03/60] drm/amd/display: Reduce expected sdp bandwidth for dcn321 Sasha Levin
2023-02-27 1:59 ` [PATCH AUTOSEL 6.2 04/60] drm/amd/display: Revert Reduce delay when sink device not able to ACK 00340h write Sasha Levin
2023-02-27 1:59 ` [PATCH AUTOSEL 6.2 05/60] drm/amd/display: Fix potential null-deref in dm_resume Sasha Levin
2023-02-27 1:59 ` [PATCH AUTOSEL 6.2 06/60] drm/omap: dsi: Fix excessive stack usage Sasha Levin
2023-02-27 1:59 ` [PATCH AUTOSEL 6.2 07/60] HID: Add Mapping for System Microphone Mute Sasha Levin
2023-02-27 1:59 ` [PATCH AUTOSEL 6.2 08/60] drm/tiny: ili9486: Do not assume 8-bit only SPI controllers Sasha Levin
2023-02-27 1:59 ` [PATCH AUTOSEL 6.2 09/60] drm/amd/display: Defer DIG FIFO disable after VID stream enable Sasha Levin
2023-02-27 1:59 ` [PATCH AUTOSEL 6.2 10/60] drm/radeon: free iio for atombios when driver shutdown Sasha Levin
2023-02-27 1:59 ` [PATCH AUTOSEL 6.2 11/60] drm/amd: Avoid BUG() for case of SRIOV missing IP version Sasha Levin
2023-02-27 1:59 ` [PATCH AUTOSEL 6.2 12/60] drm/amdkfd: Page aligned memory reserve size Sasha Levin
2023-02-27 1:59 ` [PATCH AUTOSEL 6.2 13/60] scsi: lpfc: Fix use-after-free KFENCE violation during sysfs firmware write Sasha Levin
2023-02-27 1:59 ` [PATCH AUTOSEL 6.2 14/60] Revert "fbcon: don't lose the console font across generic->chip driver switch" Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 15/60] drm/amd: Avoid ASSERT for some message failures Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 16/60] drm: amd: display: Fix memory leakage Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 17/60] drm/amd/display: fix mapping to non-allocated address Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 18/60] drm/msm/dp: Remove INIT_SETUP delay Sasha Levin
2023-02-27 9:12 ` Johan Hovold
2023-03-01 14:15 ` Sasha Levin
2023-02-27 2:00 ` Sasha Levin [this message]
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 20/60] HID: uclogic: Add battery quirk Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 21/60] HID: uclogic: Add support for XP-PEN Deco Pro SW Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 22/60] HID: uclogic: Add support for XP-PEN Deco Pro MW Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 23/60] HID: multitouch: Add quirks for flipped axes Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 24/60] drm/msm/dsi: Add missing check for alloc_ordered_workqueue Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 25/60] drm: rcar-du: Add quirk for H3 ES1.x pclk workaround Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 26/60] drm: rcar-du: Fix setting a reserved bit in DPLLCR Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 27/60] drm/drm_print: correct format problem Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 28/60] drm/amd/display: Set hvm_enabled flag for S/G mode Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 29/60] drm/client: Test for connectors before sending hotplug event Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 30/60] habanalabs: extend fatal messages to contain PCI info Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 31/60] habanalabs: fix bug in timestamps registration code Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 32/60] docs/scripts/gdb: add necessary make scripts_gdb step Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 33/60] drm/msm/dpu: Add DSC hardware blocks to register snapshot Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 34/60] ASoC: soc-compress: Reposition and add pcm_mutex Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 35/60] ASoC: kirkwood: Iterate over array indexes instead of using pointer math Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 36/60] regulator: max77802: Bounds check regulator id against opmode Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 37/60] regulator: s5m8767: Bounds check id indexing into arrays Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 38/60] Revert "drm/amdgpu: TA unload messages are not actually sent to psp when amdgpu is uninstalled" Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 39/60] drm/amd/display: fix FCLK pstate change underflow Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 40/60] gfs2: Improve gfs2_make_fs_rw error handling Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 41/60] hwmon: (coretemp) Simplify platform device handling Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 42/60] hwmon: (nct6775) Directly call ASUS ACPI WMI method Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 43/60] hwmon: (nct6775) B650/B660/X670 ASUS boards support Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 44/60] pinctrl: at91: use devm_kasprintf() to avoid potential leaks Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 45/60] drm/amd/display: Do not set DRR on pipe commit Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 46/60] drm/amd/display: Do not commit pipe when updating DRR Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 47/60] scsi: snic: Fix memory leak with using debugfs_lookup() Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 48/60] scsi: ufs: core: Fix device management cmd timeout flow Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 49/60] HID: logitech-hidpp: Don't restart communication if not necessary Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 50/60] drm/amd/display: Move DCN314 DOMAIN power control to DMCUB Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 51/60] drm/amd/display: Enable P-state validation checks for DCN314 Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 52/60] drm: panel-orientation-quirks: Add quirk for Lenovo IdeaPad Duet 3 10IGL5 Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 53/60] drm/amd/display: Disable HUBP/DPP PG on DCN314 for now Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 54/60] drm/amd/display: disable SubVP + DRR to prevent underflow Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 55/60] dm thin: add cond_resched() to various workqueue loops Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 56/60] dm cache: " Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 57/60] nfsd: zero out pointers after putting nfsd_files on COPY setup error Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 58/60] nfsd: clean up potential nfsd_file refcount leaks in COPY codepath Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 59/60] nfsd: don't hand out delegation on setuid files being opened for write Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 60/60] cifs: prevent data race in smb2_reconnect() Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230227020045.1045105-19-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=andig.mail@t-online.de \
--cc=benjamin.tissoires@redhat.com \
--cc=chad@redpilled.dev \
--cc=jikos@kernel.org \
--cc=jkosina@suse.cz \
--cc=jose.exposito89@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).