From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>,
Javier Martinez Canillas <javier@dowhile0.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Javier Martinez Canillas <javierm@redhat.com>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH AUTOSEL 6.2 36/60] regulator: max77802: Bounds check regulator id against opmode
Date: Sun, 26 Feb 2023 21:00:21 -0500 [thread overview]
Message-ID: <20230227020045.1045105-36-sashal@kernel.org> (raw)
In-Reply-To: <20230227020045.1045105-1-sashal@kernel.org>
From: Kees Cook <keescook@chromium.org>
[ Upstream commit 4fd8bcec5fd7c0d586206fa2f42bd67b06cdaa7e ]
Explicitly bounds-check the id before accessing the opmode array. Seen
with GCC 13:
../drivers/regulator/max77802-regulator.c: In function 'max77802_enable':
../drivers/regulator/max77802-regulator.c:217:29: warning: array subscript [0, 41] is outside array bounds of 'unsigned int[42]' [-Warray-bounds=]
217 | if (max77802->opmode[id] == MAX77802_OFF_PWRREQ)
| ~~~~~~~~~~~~~~~~^~~~
../drivers/regulator/max77802-regulator.c:62:22: note: while referencing 'opmode'
62 | unsigned int opmode[MAX77802_REG_MAX];
| ^~~~~~
Cc: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20230127225203.never.864-kees@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/regulator/max77802-regulator.c | 34 ++++++++++++++++++--------
1 file changed, 24 insertions(+), 10 deletions(-)
diff --git a/drivers/regulator/max77802-regulator.c b/drivers/regulator/max77802-regulator.c
index 21e0eb0f43f94..befe5f319819b 100644
--- a/drivers/regulator/max77802-regulator.c
+++ b/drivers/regulator/max77802-regulator.c
@@ -94,9 +94,11 @@ static int max77802_set_suspend_disable(struct regulator_dev *rdev)
{
unsigned int val = MAX77802_OFF_PWRREQ;
struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
- int id = rdev_get_id(rdev);
+ unsigned int id = rdev_get_id(rdev);
int shift = max77802_get_opmode_shift(id);
+ if (WARN_ON_ONCE(id >= ARRAY_SIZE(max77802->opmode)))
+ return -EINVAL;
max77802->opmode[id] = val;
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask, val << shift);
@@ -110,7 +112,7 @@ static int max77802_set_suspend_disable(struct regulator_dev *rdev)
static int max77802_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
- int id = rdev_get_id(rdev);
+ unsigned int id = rdev_get_id(rdev);
unsigned int val;
int shift = max77802_get_opmode_shift(id);
@@ -127,6 +129,9 @@ static int max77802_set_mode(struct regulator_dev *rdev, unsigned int mode)
return -EINVAL;
}
+ if (WARN_ON_ONCE(id >= ARRAY_SIZE(max77802->opmode)))
+ return -EINVAL;
+
max77802->opmode[id] = val;
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask, val << shift);
@@ -135,8 +140,10 @@ static int max77802_set_mode(struct regulator_dev *rdev, unsigned int mode)
static unsigned max77802_get_mode(struct regulator_dev *rdev)
{
struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
- int id = rdev_get_id(rdev);
+ unsigned int id = rdev_get_id(rdev);
+ if (WARN_ON_ONCE(id >= ARRAY_SIZE(max77802->opmode)))
+ return -EINVAL;
return max77802_map_mode(max77802->opmode[id]);
}
@@ -160,10 +167,13 @@ static int max77802_set_suspend_mode(struct regulator_dev *rdev,
unsigned int mode)
{
struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
- int id = rdev_get_id(rdev);
+ unsigned int id = rdev_get_id(rdev);
unsigned int val;
int shift = max77802_get_opmode_shift(id);
+ if (WARN_ON_ONCE(id >= ARRAY_SIZE(max77802->opmode)))
+ return -EINVAL;
+
/*
* If the regulator has been disabled for suspend
* then is invalid to try setting a suspend mode.
@@ -209,9 +219,11 @@ static int max77802_set_suspend_mode(struct regulator_dev *rdev,
static int max77802_enable(struct regulator_dev *rdev)
{
struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
- int id = rdev_get_id(rdev);
+ unsigned int id = rdev_get_id(rdev);
int shift = max77802_get_opmode_shift(id);
+ if (WARN_ON_ONCE(id >= ARRAY_SIZE(max77802->opmode)))
+ return -EINVAL;
if (max77802->opmode[id] == MAX77802_OFF_PWRREQ)
max77802->opmode[id] = MAX77802_OPMODE_NORMAL;
@@ -495,7 +507,7 @@ static int max77802_pmic_probe(struct platform_device *pdev)
for (i = 0; i < MAX77802_REG_MAX; i++) {
struct regulator_dev *rdev;
- int id = regulators[i].id;
+ unsigned int id = regulators[i].id;
int shift = max77802_get_opmode_shift(id);
int ret;
@@ -513,10 +525,12 @@ static int max77802_pmic_probe(struct platform_device *pdev)
* the hardware reports OFF as the regulator operating mode.
* Default to operating mode NORMAL in that case.
*/
- if (val == MAX77802_STATUS_OFF)
- max77802->opmode[id] = MAX77802_OPMODE_NORMAL;
- else
- max77802->opmode[id] = val;
+ if (id < ARRAY_SIZE(max77802->opmode)) {
+ if (val == MAX77802_STATUS_OFF)
+ max77802->opmode[id] = MAX77802_OPMODE_NORMAL;
+ else
+ max77802->opmode[id] = val;
+ }
rdev = devm_regulator_register(&pdev->dev,
®ulators[i], &config);
--
2.39.0
next prev parent reply other threads:[~2023-02-27 2:04 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-27 1:59 [PATCH AUTOSEL 6.2 01/60] drm: panel-orientation-quirks: Add quirk for Lenovo Yoga Tab 3 X90F Sasha Levin
2023-02-27 1:59 ` [PATCH AUTOSEL 6.2 02/60] drm: panel-orientation-quirks: Add quirk for DynaBook K50 Sasha Levin
2023-02-27 1:59 ` [PATCH AUTOSEL 6.2 03/60] drm/amd/display: Reduce expected sdp bandwidth for dcn321 Sasha Levin
2023-02-27 1:59 ` [PATCH AUTOSEL 6.2 04/60] drm/amd/display: Revert Reduce delay when sink device not able to ACK 00340h write Sasha Levin
2023-02-27 1:59 ` [PATCH AUTOSEL 6.2 05/60] drm/amd/display: Fix potential null-deref in dm_resume Sasha Levin
2023-02-27 1:59 ` [PATCH AUTOSEL 6.2 06/60] drm/omap: dsi: Fix excessive stack usage Sasha Levin
2023-02-27 1:59 ` [PATCH AUTOSEL 6.2 07/60] HID: Add Mapping for System Microphone Mute Sasha Levin
2023-02-27 1:59 ` [PATCH AUTOSEL 6.2 08/60] drm/tiny: ili9486: Do not assume 8-bit only SPI controllers Sasha Levin
2023-02-27 1:59 ` [PATCH AUTOSEL 6.2 09/60] drm/amd/display: Defer DIG FIFO disable after VID stream enable Sasha Levin
2023-02-27 1:59 ` [PATCH AUTOSEL 6.2 10/60] drm/radeon: free iio for atombios when driver shutdown Sasha Levin
2023-02-27 1:59 ` [PATCH AUTOSEL 6.2 11/60] drm/amd: Avoid BUG() for case of SRIOV missing IP version Sasha Levin
2023-02-27 1:59 ` [PATCH AUTOSEL 6.2 12/60] drm/amdkfd: Page aligned memory reserve size Sasha Levin
2023-02-27 1:59 ` [PATCH AUTOSEL 6.2 13/60] scsi: lpfc: Fix use-after-free KFENCE violation during sysfs firmware write Sasha Levin
2023-02-27 1:59 ` [PATCH AUTOSEL 6.2 14/60] Revert "fbcon: don't lose the console font across generic->chip driver switch" Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 15/60] drm/amd: Avoid ASSERT for some message failures Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 16/60] drm: amd: display: Fix memory leakage Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 17/60] drm/amd/display: fix mapping to non-allocated address Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 18/60] drm/msm/dp: Remove INIT_SETUP delay Sasha Levin
2023-02-27 9:12 ` Johan Hovold
2023-03-01 14:15 ` Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 19/60] HID: uclogic: Add frame type quirk Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 20/60] HID: uclogic: Add battery quirk Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 21/60] HID: uclogic: Add support for XP-PEN Deco Pro SW Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 22/60] HID: uclogic: Add support for XP-PEN Deco Pro MW Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 23/60] HID: multitouch: Add quirks for flipped axes Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 24/60] drm/msm/dsi: Add missing check for alloc_ordered_workqueue Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 25/60] drm: rcar-du: Add quirk for H3 ES1.x pclk workaround Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 26/60] drm: rcar-du: Fix setting a reserved bit in DPLLCR Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 27/60] drm/drm_print: correct format problem Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 28/60] drm/amd/display: Set hvm_enabled flag for S/G mode Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 29/60] drm/client: Test for connectors before sending hotplug event Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 30/60] habanalabs: extend fatal messages to contain PCI info Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 31/60] habanalabs: fix bug in timestamps registration code Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 32/60] docs/scripts/gdb: add necessary make scripts_gdb step Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 33/60] drm/msm/dpu: Add DSC hardware blocks to register snapshot Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 34/60] ASoC: soc-compress: Reposition and add pcm_mutex Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 35/60] ASoC: kirkwood: Iterate over array indexes instead of using pointer math Sasha Levin
2023-02-27 2:00 ` Sasha Levin [this message]
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 37/60] regulator: s5m8767: Bounds check id indexing into arrays Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 38/60] Revert "drm/amdgpu: TA unload messages are not actually sent to psp when amdgpu is uninstalled" Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 39/60] drm/amd/display: fix FCLK pstate change underflow Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 40/60] gfs2: Improve gfs2_make_fs_rw error handling Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 41/60] hwmon: (coretemp) Simplify platform device handling Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 42/60] hwmon: (nct6775) Directly call ASUS ACPI WMI method Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 43/60] hwmon: (nct6775) B650/B660/X670 ASUS boards support Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 44/60] pinctrl: at91: use devm_kasprintf() to avoid potential leaks Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 45/60] drm/amd/display: Do not set DRR on pipe commit Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 46/60] drm/amd/display: Do not commit pipe when updating DRR Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 47/60] scsi: snic: Fix memory leak with using debugfs_lookup() Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 48/60] scsi: ufs: core: Fix device management cmd timeout flow Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 49/60] HID: logitech-hidpp: Don't restart communication if not necessary Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 50/60] drm/amd/display: Move DCN314 DOMAIN power control to DMCUB Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 51/60] drm/amd/display: Enable P-state validation checks for DCN314 Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 52/60] drm: panel-orientation-quirks: Add quirk for Lenovo IdeaPad Duet 3 10IGL5 Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 53/60] drm/amd/display: Disable HUBP/DPP PG on DCN314 for now Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 54/60] drm/amd/display: disable SubVP + DRR to prevent underflow Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 55/60] dm thin: add cond_resched() to various workqueue loops Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 56/60] dm cache: " Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 57/60] nfsd: zero out pointers after putting nfsd_files on COPY setup error Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 58/60] nfsd: clean up potential nfsd_file refcount leaks in COPY codepath Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 59/60] nfsd: don't hand out delegation on setuid files being opened for write Sasha Levin
2023-02-27 2:00 ` [PATCH AUTOSEL 6.2 60/60] cifs: prevent data race in smb2_reconnect() Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230227020045.1045105-36-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=broonie@kernel.org \
--cc=javier@dowhile0.org \
--cc=javierm@redhat.com \
--cc=keescook@chromium.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).