From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Mengyuan Lou <mengyuanlou@net-swift.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Sasha Levin <sashal@kernel.org>,
linux-pci@vger.kernel.org
Subject: [PATCH AUTOSEL 5.10 27/30] PCI: Add ACS quirk for Wangxun NICs
Date: Fri, 3 Mar 2023 16:47:12 -0500 [thread overview]
Message-ID: <20230303214715.1452256-27-sashal@kernel.org> (raw)
In-Reply-To: <20230303214715.1452256-1-sashal@kernel.org>
From: Mengyuan Lou <mengyuanlou@net-swift.com>
[ Upstream commit a2b9b123ccac913e9f9b80337d687a2fe786a634 ]
Wangxun has verified there is no peer-to-peer between functions for the
below selection of SFxxx, RP1000 and RP2000 NICS. They may be
multi-function devices, but the hardware does not advertise ACS capability.
Add an ACS quirk for these devices so the functions can be in independent
IOMMU groups.
Link: https://lore.kernel.org/r/20230207102419.44326-1-mengyuanlou@net-swift.com
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pci/quirks.c | 22 ++++++++++++++++++++++
include/linux/pci_ids.h | 2 ++
2 files changed, 24 insertions(+)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index fb2e52fd01b39..f79d9d2250bad 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4797,6 +4797,26 @@ static int pci_quirk_brcm_acs(struct pci_dev *dev, u16 acs_flags)
PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
}
+/*
+ * Wangxun 10G/1G NICs have no ACS capability, and on multi-function
+ * devices, peer-to-peer transactions are not be used between the functions.
+ * So add an ACS quirk for below devices to isolate functions.
+ * SFxxx 1G NICs(em).
+ * RP1000/RP2000 10G NICs(sp).
+ */
+static int pci_quirk_wangxun_nic_acs(struct pci_dev *dev, u16 acs_flags)
+{
+ switch (dev->device) {
+ case 0x0100 ... 0x010F:
+ case 0x1001:
+ case 0x2001:
+ return pci_acs_ctrl_enabled(acs_flags,
+ PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
+ }
+
+ return false;
+}
+
static const struct pci_dev_acs_enabled {
u16 vendor;
u16 device;
@@ -4942,6 +4962,8 @@ static const struct pci_dev_acs_enabled {
{ PCI_VENDOR_ID_NXP, 0x8d9b, pci_quirk_nxp_rp_acs },
/* Zhaoxin Root/Downstream Ports */
{ PCI_VENDOR_ID_ZHAOXIN, PCI_ANY_ID, pci_quirk_zhaoxin_pcie_ports_acs },
+ /* Wangxun nics */
+ { PCI_VENDOR_ID_WANGXUN, PCI_ANY_ID, pci_quirk_wangxun_nic_acs },
{ 0 }
};
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 69e310173fbca..2e1935917c241 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -3033,6 +3033,8 @@
#define PCI_DEVICE_ID_INTEL_VMD_9A0B 0x9a0b
#define PCI_DEVICE_ID_INTEL_S21152BB 0xb152
+#define PCI_VENDOR_ID_WANGXUN 0x8088
+
#define PCI_VENDOR_ID_SCALEMP 0x8686
#define PCI_DEVICE_ID_SCALEMP_VSMP_CTL 0x1010
--
2.39.2
next prev parent reply other threads:[~2023-03-03 21:58 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-03 21:46 [PATCH AUTOSEL 5.10 01/30] IB/hfi1: Update RMT size calculation Sasha Levin
2023-03-03 21:46 ` [PATCH AUTOSEL 5.10 02/30] iommu/amd: Fix error handling for pdev_pri_ats_enable() Sasha Levin
2023-03-03 21:46 ` [PATCH AUTOSEL 5.10 03/30] media: uvcvideo: Handle cameras with invalid descriptors Sasha Levin
2023-03-03 21:46 ` [PATCH AUTOSEL 5.10 04/30] media: uvcvideo: Handle errors from calls to usb_string Sasha Levin
2023-03-03 21:46 ` [PATCH AUTOSEL 5.10 05/30] media: uvcvideo: Quirk for autosuspend in Logitech B910 and C910 Sasha Levin
2023-03-03 21:46 ` [PATCH AUTOSEL 5.10 06/30] media: uvcvideo: Silence memcpy() run-time false positive warnings Sasha Levin
2023-03-03 21:46 ` [PATCH AUTOSEL 5.10 07/30] staging: emxx_udc: Add checks for dma_alloc_coherent() Sasha Levin
2023-03-03 21:46 ` [PATCH AUTOSEL 5.10 08/30] tty: fix out-of-bounds access in tty_driver_lookup_tty() Sasha Levin
2023-03-03 21:46 ` [PATCH AUTOSEL 5.10 09/30] tty: serial: fsl_lpuart: disable the CTS when send break signal Sasha Levin
2023-03-03 21:46 ` [PATCH AUTOSEL 5.10 10/30] serial: sc16is7xx: setup GPIO controller later in probe Sasha Levin
2023-03-03 21:46 ` [PATCH AUTOSEL 5.10 11/30] mei: bus-fixup:upon error print return values of send and receive Sasha Levin
2023-03-03 21:46 ` [PATCH AUTOSEL 5.10 12/30] parport_pc: Set up mode and ECR masks for Oxford Semiconductor devices Sasha Levin
2023-03-03 21:46 ` [PATCH AUTOSEL 5.10 13/30] tools/iio/iio_utils:fix memory leak Sasha Levin
2023-03-03 21:46 ` [PATCH AUTOSEL 5.10 14/30] iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_status_word() Sasha Levin
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 15/30] iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_config_word() Sasha Levin
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 16/30] firmware: coreboot: framebuffer: Ignore reserved pixel color bits Sasha Levin
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 17/30] PCI: loongson: Prevent LS7A MRRS increases Sasha Levin
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 18/30] usb: host: xhci: mvebu: Iterate over array indexes instead of using pointer math Sasha Levin
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 19/30] USB: ene_usb6250: Allocate enough memory for full object Sasha Levin
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 20/30] usb: uvc: Enumerate valid values for color matching Sasha Levin
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 21/30] usb: gadget: uvc: Make bSourceID read/write Sasha Levin
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 22/30] PCI: Align extra resources for hotplug bridges properly Sasha Levin
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 23/30] PCI: Take other bus devices into account when distributing resources Sasha Levin
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 24/30] kernel/power/energy_model.c: fix memory leak with using debugfs_lookup() Sasha Levin
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 25/30] kernel/fail_function: " Sasha Levin
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 26/30] PCI: loongson: Add more devices that need MRRS quirk Sasha Levin
2023-03-03 21:47 ` Sasha Levin [this message]
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 28/30] phy: rockchip-typec: Fix unsigned comparison with less than zero Sasha Levin
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 29/30] soundwire: cadence: Remove wasted space in response_buf Sasha Levin
2023-03-03 21:47 ` [PATCH AUTOSEL 5.10 30/30] soundwire: cadence: Drain the RX FIFO after an IO timeout Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230303214715.1452256-27-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=bhelgaas@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mengyuanlou@net-swift.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox