[PATCH 4.19 17/36] hwmon: (adt7475) Display smoothing attributes in correct order

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

From: Tony O'Brien <tony.obrien@alliedtelesis.co.nz>

[ Upstream commit 5f8d1e3b6f9b5971f9c06d5846ce00c49e3a8d94 ]

Throughout the ADT7475 driver, attributes relating to the temperature
sensors are displayed in the order Remote 1, Local, Remote 2.  Make
temp_st_show() conform to this expectation so that values set by
temp_st_store() can be displayed using the correct attribute.

Fixes: 8f05bcc33e74 ("hwmon: (adt7475) temperature smoothing")
Signed-off-by: Tony O'Brien <tony.obrien@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20230222005228.158661-2-tony.obrien@alliedtelesis.co.nz
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/adt7475.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index 0a87c5b512862..bde5fe10a95a5 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -554,11 +554,11 @@ static ssize_t show_temp_st(struct device *dev, struct device_attribute *attr,
 		val = data->enh_acoustics[0] & 0xf;
 		break;
 	case 1:
-		val = (data->enh_acoustics[1] >> 4) & 0xf;
+		val = data->enh_acoustics[1] & 0xf;
 		break;
 	case 2:
 	default:
-		val = data->enh_acoustics[1] & 0xf;
+		val = (data->enh_acoustics[1] >> 4) & 0xf;
 		break;
 	}
 
-- 
2.39.2