[PATCH 4.19 00/36] 4.19.279-rc1 review

[PATCH 4.19 00/36] 4.19.279-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.19.279 release.
There are 36 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 22 Mar 2023 14:54:13 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.279-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.19.279-rc1

Lee Jones <lee@kernel.org>
    HID: uhid: Over-ride the default maximum data buffer value with our own

Lee Jones <lee@kernel.org>
    HID: core: Provide new max_buffer_size attribute to over-ride the default

Biju Das <biju.das.jz@bp.renesas.com>
    serial: 8250_em: Fix UART port type

John Harrison <John.C.Harrison@Intel.com>
    drm/i915: Don't use stolen memory for ring buffers with LLC

Nikita Zhandarovich <n.zhandarovich@fintech.ru>
    x86/mm: Fix use of uninitialized buffer in sme_enable()

Helge Deller <deller@gmx.de>
    fbdev: stifb: Provide valid pixelclock and add fb_check_var() checks

Chen Zhongjin <chenzhongjin@huawei.com>
    ftrace: Fix invalid address access in lookup_rec() when index is 0

Steven Rostedt (Google) <rostedt@goodmis.org>
    tracing: Make tracepoint lockdep check actually test something

Steven Rostedt (Google) <rostedt@goodmis.org>
    tracing: Check field value in hist_field_name()

Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
    sh: intc: Avoid spurious sizeof-pointer-div warning

Qu Huang <qu.huang@linux.dev>
    drm/amdkfd: Fix an illegal memory access

Baokun Li <libaokun1@huawei.com>
    ext4: fix task hung in ext4_xattr_delete_inode

Baokun Li <libaokun1@huawei.com>
    ext4: fail ext4_iget if special inode unallocated

David Gow <davidgow@google.com>
    rust: arch/um: Disable FP/SIMD instruction to match x86

Yifei Liu <yifeliu@cs.stonybrook.edu>
    jffs2: correct logic when creating a hole in jffs2_write_begin

Tobias Schramm <t.schramm@manjaro.org>
    mmc: atmel-mci: fix race between stop command and start of next command

Linus Torvalds <torvalds@linux-foundation.org>
    media: m5mols: fix off-by-one loop termination error

Zheng Wang <zyytlz.wz@163.com>
    hwmon: (xgene) Fix use after free bug in xgene_hwmon_remove due to race condition

Tony O'Brien <tony.obrien@alliedtelesis.co.nz>
    hwmon: (adt7475) Fix masking of hysteresis registers

Tony O'Brien <tony.obrien@alliedtelesis.co.nz>
    hwmon: (adt7475) Display smoothing attributes in correct order

Liang He <windhl@126.com>
    ethernet: sun: add check for the mdesc_grab()

Alexandra Winter <wintera@linux.ibm.com>
    net/iucv: Fix size of interrupt data

Szymon Heidrich <szymon.heidrich@gmail.com>
    net: usb: smsc75xx: Move packet length check to prevent kernel panic in skb_pull

Ido Schimmel <idosch@nvidia.com>
    ipv4: Fix incorrect table ID in IOCTL path

Liang He <windhl@126.com>
    block: sunvdc: add check for mdesc_grab() returning NULL

Damien Le Moal <damien.lemoal@opensource.wdc.com>
    nvmet: avoid potential UAF in nvmet_req_complete()

Szymon Heidrich <szymon.heidrich@gmail.com>
    net: usb: smsc75xx: Limit packet length to skb->len

Zheng Wang <zyytlz.wz@163.com>
    nfc: st-nci: Fix use after free bug in ndlc_remove due to race condition

Heiner Kallweit <hkallweit1@gmail.com>
    net: phy: smsc: bail out in lan87xx_read_status if genphy_read_status fails

Eric Dumazet <edumazet@google.com>
    net: tunnels: annotate lockless accesses to dev->needed_headroom

Daniil Tatianin <d-tatianin@yandex-team.ru>
    qed/qed_dev: guard against a possible division by zero

Fedor Pchelkin <pchelkin@ispras.ru>
    nfc: pn533: initialize struct pn533_out_arg properly

Breno Leitao <leitao@debian.org>
    tcp: tcp_make_synack() can be called from process context

Randy Dunlap <rdunlap@infradead.org>
    clk: HI655X: select REGMAP instead of depending on it

Eric Biggers <ebiggers@kernel.org>
    fs: sysfs_emit_at: Remove PAGE_SIZE alignment check

Eric Biggers <ebiggers@google.com>
    ext4: fix cgroup writeback accounting with fs-layer encryption


-------------

Diffstat:

 Makefile                                  |  4 ++--
 arch/x86/Makefile.um                      |  6 ++++++
 arch/x86/mm/mem_encrypt_identity.c        |  3 ++-
 drivers/block/sunvdc.c                    |  2 ++
 drivers/clk/Kconfig                       |  2 +-
 drivers/gpu/drm/amd/amdkfd/kfd_events.c   |  9 +++------
 drivers/gpu/drm/i915/intel_ringbuffer.c   |  5 +++--
 drivers/hid/hid-core.c                    | 18 +++++++++++++-----
 drivers/hid/uhid.c                        |  1 +
 drivers/hwmon/adt7475.c                   |  8 ++++----
 drivers/hwmon/xgene-hwmon.c               |  1 +
 drivers/media/i2c/m5mols/m5mols_core.c    |  2 +-
 drivers/mmc/host/atmel-mci.c              |  3 ---
 drivers/net/ethernet/qlogic/qed/qed_dev.c |  5 +++++
 drivers/net/ethernet/sun/ldmvsw.c         |  3 +++
 drivers/net/ethernet/sun/sunvnet.c        |  3 +++
 drivers/net/phy/smsc.c                    |  5 ++++-
 drivers/net/usb/smsc75xx.c                |  7 +++++++
 drivers/nfc/pn533/usb.c                   |  1 +
 drivers/nfc/st-nci/ndlc.c                 |  6 ++++--
 drivers/nvme/target/core.c                |  4 +++-
 drivers/tty/serial/8250/8250_em.c         |  4 ++--
 drivers/video/fbdev/stifb.c               | 27 +++++++++++++++++++++++++++
 fs/ext4/inode.c                           | 18 ++++++++----------
 fs/ext4/page-io.c                         | 11 ++++++-----
 fs/ext4/xattr.c                           | 11 +++++++++++
 fs/jffs2/file.c                           | 15 +++++++--------
 fs/sysfs/file.c                           |  2 +-
 include/linux/hid.h                       |  3 +++
 include/linux/netdevice.h                 |  6 ++++--
 include/linux/sh_intc.h                   |  5 ++++-
 include/linux/tracepoint.h                | 15 ++++++---------
 kernel/trace/ftrace.c                     |  3 ++-
 kernel/trace/trace_events_hist.c          |  3 +++
 net/ipv4/fib_frontend.c                   |  3 +++
 net/ipv4/ip_tunnel.c                      | 12 ++++++------
 net/ipv4/tcp_output.c                     |  2 +-
 net/ipv6/ip6_tunnel.c                     |  4 ++--
 net/iucv/iucv.c                           |  2 +-
 39 files changed, 166 insertions(+), 78 deletions(-)

[PATCH 4.19 01/36] ext4: fix cgroup writeback accounting with fs-layer encryption

[Greg Kroah-Hartman]

From: Eric Biggers <ebiggers@google.com>

commit ffec85d53d0f39ee4680a2cf0795255e000e1feb upstream.

When writing a page from an encrypted file that is using
filesystem-layer encryption (not inline encryption), ext4 encrypts the
pagecache page into a bounce page, then writes the bounce page.

It also passes the bounce page to wbc_account_cgroup_owner().  That's
incorrect, because the bounce page is a newly allocated temporary page
that doesn't have the memory cgroup of the original pagecache page.
This makes wbc_account_cgroup_owner() not account the I/O to the owner
of the pagecache page as it should.

Fix this by always passing the pagecache page to
wbc_account_cgroup_owner().

Fixes: 001e4a8775f6 ("ext4: implement cgroup writeback support")
Cc: stable@vger.kernel.org
Reported-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203005503.141557-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/page-io.c |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

--- a/fs/ext4/page-io.c
+++ b/fs/ext4/page-io.c
@@ -388,7 +388,8 @@ static int io_submit_init_bio(struct ext
 
 static int io_submit_add_bh(struct ext4_io_submit *io,
 			    struct inode *inode,
-			    struct page *page,
+			    struct page *pagecache_page,
+			    struct page *bounce_page,
 			    struct buffer_head *bh)
 {
 	int ret;
@@ -403,10 +404,11 @@ submit_and_retry:
 			return ret;
 		io->io_bio->bi_write_hint = inode->i_write_hint;
 	}
-	ret = bio_add_page(io->io_bio, page, bh->b_size, bh_offset(bh));
+	ret = bio_add_page(io->io_bio, bounce_page ?: pagecache_page,
+			   bh->b_size, bh_offset(bh));
 	if (ret != bh->b_size)
 		goto submit_and_retry;
-	wbc_account_io(io->io_wbc, page, bh->b_size);
+	wbc_account_io(io->io_wbc, pagecache_page, bh->b_size);
 	io->io_next_block++;
 	return 0;
 }
@@ -514,8 +516,7 @@ int ext4_bio_write_page(struct ext4_io_s
 	do {
 		if (!buffer_async_write(bh))
 			continue;
-		ret = io_submit_add_bh(io, inode,
-				       data_page ? data_page : page, bh);
+		ret = io_submit_add_bh(io, inode, page, data_page, bh);
 		if (ret) {
 			/*
 			 * We only get here on ENOMEM.  Not much else

[PATCH 4.19 02/36] fs: sysfs_emit_at: Remove PAGE_SIZE alignment check

[Greg Kroah-Hartman]

From: Eric Biggers <ebiggers@kernel.org>

From: Eric Biggers <ebiggers@google.com>

[No upstream commit because this fixes a bug in a backport.]

Before upstream commit 59bb47985c1d ("mm, sl[aou]b: guarantee natural
alignment for kmalloc(power-of-two)") which went into v5.4, kmalloc did
*not* always guarantee that PAGE_SIZE allocations are PAGE_SIZE-aligned.

Upstream commit 2efc459d06f1 ("sysfs: Add sysfs_emit and sysfs_emit_at
to format sysfs output") added two WARN()s that trigger when PAGE_SIZE
allocations are not PAGE_SIZE-aligned.  This was backported to old
kernels that don't guarantee PAGE_SIZE alignment.

Commit 10ddfb495232 ("fs: sysfs_emit: Remove PAGE_SIZE alignment check")
in 4.19.y, and its equivalent in 4.14.y and 4.9.y, tried to fix this
bug.  However, only it handled sysfs_emit(), not sysfs_emit_at().

Fix it in sysfs_emit_at() too.

A reproducer is to build the kernel with the following options:

	CONFIG_SLUB=y
	CONFIG_SLUB_DEBUG=y
	CONFIG_SLUB_DEBUG_ON=y
	CONFIG_PM=y
	CONFIG_SUSPEND=y
	CONFIG_PM_WAKELOCKS=y

Then run:

	echo foo > /sys/power/wake_lock && cat /sys/power/wake_lock

Fixes: cb1f69d53ac8 ("sysfs: Add sysfs_emit and sysfs_emit_at to format sysfs output")
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/r/202303141634.1e64fd76-yujie.liu@intel.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/sysfs/file.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -599,7 +599,7 @@ int sysfs_emit_at(char *buf, int at, con
 	va_list args;
 	int len;
 
-	if (WARN(!buf || offset_in_page(buf) || at < 0 || at >= PAGE_SIZE,
+	if (WARN(!buf || at < 0 || at >= PAGE_SIZE,
 		 "invalid sysfs_emit_at: buf:%p at:%d\n", buf, at))
 		return 0;
 

[PATCH 4.19 03/36] clk: HI655X: select REGMAP instead of depending on it

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 0ffad67784a097beccf34d297ddd1b0773b3b8a3 ]

REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

Therefore, change the use of "depends on REGMAP" to "select REGMAP".

Fixes: 3a49afb84ca0 ("clk: enable hi655x common clk automatically")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Riku Voipio <riku.voipio@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: linux-clk@vger.kernel.org
Link: https://lore.kernel.org/r/20230226053953.4681-3-rdunlap@infradead.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 292056bbb30e9..ffe81449ce246 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -63,7 +63,7 @@ config COMMON_CLK_RK808
 config COMMON_CLK_HI655X
 	tristate "Clock driver for Hi655x" if EXPERT
 	depends on (MFD_HI655X_PMIC || COMPILE_TEST)
-	depends on REGMAP
+	select REGMAP
 	default MFD_HI655X_PMIC
 	---help---
 	  This driver supports the hi655x PMIC clock. This
-- 
2.39.2

[PATCH 4.19 04/36] tcp: tcp_make_synack() can be called from process context

[Greg Kroah-Hartman]

From: Breno Leitao <leitao@debian.org>

[ Upstream commit bced3f7db95ff2e6ca29dc4d1c9751ab5e736a09 ]

tcp_rtx_synack() now could be called in process context as explained in
0a375c822497 ("tcp: tcp_rtx_synack() can be called from process
context").

tcp_rtx_synack() might call tcp_make_synack(), which will touch per-CPU
variables with preemption enabled. This causes the following BUG:

    BUG: using __this_cpu_add() in preemptible [00000000] code: ThriftIO1/5464
    caller is tcp_make_synack+0x841/0xac0
    Call Trace:
     <TASK>
     dump_stack_lvl+0x10d/0x1a0
     check_preemption_disabled+0x104/0x110
     tcp_make_synack+0x841/0xac0
     tcp_v6_send_synack+0x5c/0x450
     tcp_rtx_synack+0xeb/0x1f0
     inet_rtx_syn_ack+0x34/0x60
     tcp_check_req+0x3af/0x9e0
     tcp_rcv_state_process+0x59b/0x2030
     tcp_v6_do_rcv+0x5f5/0x700
     release_sock+0x3a/0xf0
     tcp_sendmsg+0x33/0x40
     ____sys_sendmsg+0x2f2/0x490
     __sys_sendmsg+0x184/0x230
     do_syscall_64+0x3d/0x90

Avoid calling __TCP_INC_STATS() with will touch per-cpu variables. Use
TCP_INC_STATS() which is safe to be called from context switch.

Fixes: 8336886f786f ("tcp: TCP Fast Open Server - support TFO listeners")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230308190745.780221-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp_output.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 8962864223b43..9299de0da3514 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -3307,7 +3307,7 @@ struct sk_buff *tcp_make_synack(const struct sock *sk, struct dst_entry *dst,
 	th->window = htons(min(req->rsk_rcv_wnd, 65535U));
 	tcp_options_write((__be32 *)(th + 1), NULL, &opts);
 	th->doff = (tcp_header_size >> 2);
-	__TCP_INC_STATS(sock_net(sk), TCP_MIB_OUTSEGS);
+	TCP_INC_STATS(sock_net(sk), TCP_MIB_OUTSEGS);
 
 #ifdef CONFIG_TCP_MD5SIG
 	/* Okay, we have all we need - do the md5 hash if needed */
-- 
2.39.2

[PATCH 4.19 05/36] nfc: pn533: initialize struct pn533_out_arg properly

[Greg Kroah-Hartman]

From: Fedor Pchelkin <pchelkin@ispras.ru>

[ Upstream commit 484b7059796e3bc1cb527caa61dfc60da649b4f6 ]

struct pn533_out_arg used as a temporary context for out_urb is not
initialized properly. Its uninitialized 'phy' field can be dereferenced in
error cases inside pn533_out_complete() callback function. It causes the
following failure:

general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.2.0-rc3-next-20230110-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
RIP: 0010:pn533_out_complete.cold+0x15/0x44 drivers/nfc/pn533/usb.c:441
Call Trace:
 <IRQ>
 __usb_hcd_giveback_urb+0x2b6/0x5c0 drivers/usb/core/hcd.c:1671
 usb_hcd_giveback_urb+0x384/0x430 drivers/usb/core/hcd.c:1754
 dummy_timer+0x1203/0x32d0 drivers/usb/gadget/udc/dummy_hcd.c:1988
 call_timer_fn+0x1da/0x800 kernel/time/timer.c:1700
 expire_timers+0x234/0x330 kernel/time/timer.c:1751
 __run_timers kernel/time/timer.c:2022 [inline]
 __run_timers kernel/time/timer.c:1995 [inline]
 run_timer_softirq+0x326/0x910 kernel/time/timer.c:2035
 __do_softirq+0x1fb/0xaf6 kernel/softirq.c:571
 invoke_softirq kernel/softirq.c:445 [inline]
 __irq_exit_rcu+0x123/0x180 kernel/softirq.c:650
 irq_exit_rcu+0x9/0x20 kernel/softirq.c:662
 sysvec_apic_timer_interrupt+0x97/0xc0 arch/x86/kernel/apic/apic.c:1107

Initialize the field with the pn533_usb_phy currently used.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: 9dab880d675b ("nfc: pn533: Wait for out_urb's completion in pn533_usb_send_frame()")
Reported-by: syzbot+1e608ba4217c96d1952f@syzkaller.appspotmail.com
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230309165050.207390-1-pchelkin@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nfc/pn533/usb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/nfc/pn533/usb.c b/drivers/nfc/pn533/usb.c
index c7da364b63584..a2d61d8240246 100644
--- a/drivers/nfc/pn533/usb.c
+++ b/drivers/nfc/pn533/usb.c
@@ -187,6 +187,7 @@ static int pn533_usb_send_frame(struct pn533 *dev,
 	print_hex_dump_debug("PN533 TX: ", DUMP_PREFIX_NONE, 16, 1,
 			     out->data, out->len, false);
 
+	arg.phy = phy;
 	init_completion(&arg.done);
 	cntx = phy->out_urb->context;
 	phy->out_urb->context = &arg;
-- 
2.39.2

[PATCH 4.19 06/36] qed/qed_dev: guard against a possible division by zero

[Greg Kroah-Hartman]

From: Daniil Tatianin <d-tatianin@yandex-team.ru>

[ Upstream commit 1a9dc5610ef89d807acdcfbff93a558f341a44da ]

Previously we would divide total_left_rate by zero if num_vports
happened to be 1 because non_requested_count is calculated as
num_vports - req_count. Guard against this by validating num_vports at
the beginning and returning an error otherwise.

Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.

Fixes: bcd197c81f63 ("qed: Add vport WFQ configuration APIs")
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230309201556.191392-1-d-tatianin@yandex-team.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_dev.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c
index e50fc8f714dcf..7e5beb4136014 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dev.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c
@@ -4062,6 +4062,11 @@ static int qed_init_wfq_param(struct qed_hwfn *p_hwfn,
 
 	num_vports = p_hwfn->qm_info.num_vports;
 
+	if (num_vports < 2) {
+		DP_NOTICE(p_hwfn, "Unexpected num_vports: %d\n", num_vports);
+		return -EINVAL;
+	}
+
 	/* Accounting for the vports which are configured for WFQ explicitly */
 	for (i = 0; i < num_vports; i++) {
 		u32 tmp_speed;
-- 
2.39.2

[PATCH 4.19 07/36] net: tunnels: annotate lockless accesses to dev->needed_headroom

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 4b397c06cb987935b1b097336532aa6b4210e091 ]

IP tunnels can apparently update dev->needed_headroom
in their xmit path.

This patch takes care of three tunnels xmit, and also the
core LL_RESERVED_SPACE() and LL_RESERVED_SPACE_EXTRA()
helpers.

More changes might be needed for completeness.

BUG: KCSAN: data-race in ip_tunnel_xmit / ip_tunnel_xmit

read to 0xffff88815b9da0ec of 2 bytes by task 888 on cpu 1:
ip_tunnel_xmit+0x1270/0x1730 net/ipv4/ip_tunnel.c:803
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246

write to 0xffff88815b9da0ec of 2 bytes by task 2379 on cpu 0:
ip_tunnel_xmit+0x1294/0x1730 net/ipv4/ip_tunnel.c:804
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip6_finish_output2+0x9bc/0xc50 net/ipv6/ip6_output.c:134
__ip6_finish_output net/ipv6/ip6_output.c:195 [inline]
ip6_finish_output+0x39a/0x4e0 net/ipv6/ip6_output.c:206
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip6_output+0xeb/0x220 net/ipv6/ip6_output.c:227
dst_output include/net/dst.h:444 [inline]
NF_HOOK include/linux/netfilter.h:302 [inline]
mld_sendpack+0x438/0x6a0 net/ipv6/mcast.c:1820
mld_send_cr net/ipv6/mcast.c:2121 [inline]
mld_ifc_work+0x519/0x7b0 net/ipv6/mcast.c:2653
process_one_work+0x3e6/0x750 kernel/workqueue.c:2390
worker_thread+0x5f2/0xa10 kernel/workqueue.c:2537
kthread+0x1ac/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308

value changed: 0x0dd4 -> 0x0e14

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 2379 Comm: kworker/0:0 Not tainted 6.3.0-rc1-syzkaller-00002-g8ca09d5fa354-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023
Workqueue: mld mld_ifc_work

Fixes: 8eb30be0352d ("ipv6: Create ip6_tnl_xmit")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230310191109.2384387-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/netdevice.h |  6 ++++--
 net/ipv4/ip_tunnel.c      | 12 ++++++------
 net/ipv6/ip6_tunnel.c     |  4 ++--
 3 files changed, 12 insertions(+), 10 deletions(-)

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 8d48b352ee74f..4d0f48e74755d 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -260,9 +260,11 @@ struct hh_cache {
  * relationship HH alignment <= LL alignment.
  */
 #define LL_RESERVED_SPACE(dev) \
-	((((dev)->hard_header_len+(dev)->needed_headroom)&~(HH_DATA_MOD - 1)) + HH_DATA_MOD)
+	((((dev)->hard_header_len + READ_ONCE((dev)->needed_headroom)) \
+	  & ~(HH_DATA_MOD - 1)) + HH_DATA_MOD)
 #define LL_RESERVED_SPACE_EXTRA(dev,extra) \
-	((((dev)->hard_header_len+(dev)->needed_headroom+(extra))&~(HH_DATA_MOD - 1)) + HH_DATA_MOD)
+	((((dev)->hard_header_len + READ_ONCE((dev)->needed_headroom) + (extra)) \
+	  & ~(HH_DATA_MOD - 1)) + HH_DATA_MOD)
 
 struct header_ops {
 	int	(*create) (struct sk_buff *skb, struct net_device *dev,
diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c
index 30e93b4f831f6..9c2381cf675d6 100644
--- a/net/ipv4/ip_tunnel.c
+++ b/net/ipv4/ip_tunnel.c
@@ -609,10 +609,10 @@ void ip_md_tunnel_xmit(struct sk_buff *skb, struct net_device *dev, u8 proto)
 	else if (skb->protocol == htons(ETH_P_IP))
 		df = inner_iph->frag_off & htons(IP_DF);
 	headroom += LL_RESERVED_SPACE(rt->dst.dev) + rt->dst.header_len;
-	if (headroom > dev->needed_headroom)
-		dev->needed_headroom = headroom;
+	if (headroom > READ_ONCE(dev->needed_headroom))
+		WRITE_ONCE(dev->needed_headroom, headroom);
 
-	if (skb_cow_head(skb, dev->needed_headroom)) {
+	if (skb_cow_head(skb, READ_ONCE(dev->needed_headroom))) {
 		ip_rt_put(rt);
 		goto tx_dropped;
 	}
@@ -777,10 +777,10 @@ void ip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev,
 
 	max_headroom = LL_RESERVED_SPACE(rt->dst.dev) + sizeof(struct iphdr)
 			+ rt->dst.header_len + ip_encap_hlen(&tunnel->encap);
-	if (max_headroom > dev->needed_headroom)
-		dev->needed_headroom = max_headroom;
+	if (max_headroom > READ_ONCE(dev->needed_headroom))
+		WRITE_ONCE(dev->needed_headroom, max_headroom);
 
-	if (skb_cow_head(skb, dev->needed_headroom)) {
+	if (skb_cow_head(skb, READ_ONCE(dev->needed_headroom))) {
 		ip_rt_put(rt);
 		dev->stats.tx_dropped++;
 		kfree_skb(skb);
diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c
index 75a1ec2605fca..48a658b541d75 100644
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -1206,8 +1206,8 @@ int ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev, __u8 dsfield,
 	 */
 	max_headroom = LL_RESERVED_SPACE(dst->dev) + sizeof(struct ipv6hdr)
 			+ dst->header_len + t->hlen;
-	if (max_headroom > dev->needed_headroom)
-		dev->needed_headroom = max_headroom;
+	if (max_headroom > READ_ONCE(dev->needed_headroom))
+		WRITE_ONCE(dev->needed_headroom, max_headroom);
 
 	err = ip6_tnl_encap(skb, t, &proto, fl6);
 	if (err)
-- 
2.39.2

[PATCH 4.19 08/36] net: phy: smsc: bail out in lan87xx_read_status if genphy_read_status fails

[Greg Kroah-Hartman]

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit c22c3bbf351e4ce905f082649cffa1ff893ea8c1 ]

If genphy_read_status fails then further access to the PHY may result
in unpredictable behavior. To prevent this bail out immediately if
genphy_read_status fails.

Fixes: 4223dbffed9f ("net: phy: smsc: Re-enable EDPD mode for LAN87xx")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/026aa4f2-36f5-1c10-ab9f-cdb17dda6ac4@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/smsc.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index c328208388da7..fd7c9f5ff99eb 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -112,8 +112,11 @@ static int lan911x_config_init(struct phy_device *phydev)
 static int lan87xx_read_status(struct phy_device *phydev)
 {
 	struct smsc_phy_priv *priv = phydev->priv;
+	int err;
 
-	int err = genphy_read_status(phydev);
+	err = genphy_read_status(phydev);
+	if (err)
+		return err;
 
 	if (!phydev->link && priv->energy_enable) {
 		int i;
-- 
2.39.2

[PATCH 4.19 09/36] nfc: st-nci: Fix use after free bug in ndlc_remove due to race condition

[Greg Kroah-Hartman]

From: Zheng Wang <zyytlz.wz@163.com>

[ Upstream commit 5000fe6c27827a61d8250a7e4a1d26c3298ef4f6 ]

This bug influences both st_nci_i2c_remove and st_nci_spi_remove.
Take st_nci_i2c_remove as an example.

In st_nci_i2c_probe, it called ndlc_probe and bound &ndlc->sm_work
with llt_ndlc_sm_work.

When it calls ndlc_recv or timeout handler, it will finally call
schedule_work to start the work.

When we call st_nci_i2c_remove to remove the driver, there
may be a sequence as follows:

Fix it by finishing the work before cleanup in ndlc_remove

CPU0                  CPU1

                    |llt_ndlc_sm_work
st_nci_i2c_remove   |
  ndlc_remove       |
     st_nci_remove  |
     nci_free_device|
     kfree(ndev)    |
//free ndlc->ndev   |
                    |llt_ndlc_rcv_queue
                    |nci_recv_frame
                    |//use ndlc->ndev

Fixes: 35630df68d60 ("NFC: st21nfcb: Add driver for STMicroelectronics ST21NFCB NFC chip")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230312160837.2040857-1-zyytlz.wz@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nfc/st-nci/ndlc.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/nfc/st-nci/ndlc.c b/drivers/nfc/st-nci/ndlc.c
index f26d938d240f0..12d73f9dbe9f3 100644
--- a/drivers/nfc/st-nci/ndlc.c
+++ b/drivers/nfc/st-nci/ndlc.c
@@ -297,13 +297,15 @@ EXPORT_SYMBOL(ndlc_probe);
 
 void ndlc_remove(struct llt_ndlc *ndlc)
 {
-	st_nci_remove(ndlc->ndev);
-
 	/* cancel timers */
 	del_timer_sync(&ndlc->t1_timer);
 	del_timer_sync(&ndlc->t2_timer);
 	ndlc->t2_active = false;
 	ndlc->t1_active = false;
+	/* cancel work */
+	cancel_work_sync(&ndlc->sm_work);
+
+	st_nci_remove(ndlc->ndev);
 
 	skb_queue_purge(&ndlc->rcv_q);
 	skb_queue_purge(&ndlc->send_q);
-- 
2.39.2

[PATCH 4.19 10/36] net: usb: smsc75xx: Limit packet length to skb->len

[Greg Kroah-Hartman]

From: Szymon Heidrich <szymon.heidrich@gmail.com>

[ Upstream commit d8b228318935044dafe3a5bc07ee71a1f1424b8d ]

Packet length retrieved from skb data may be larger than
the actual socket buffer length (up to 9026 bytes). In such
case the cloned skb passed up the network stack will leak
kernel memory contents.

Fixes: d0cad871703b ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver")
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/smsc75xx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c
index 8b9fd4e071f3d..b4705dee2b751 100644
--- a/drivers/net/usb/smsc75xx.c
+++ b/drivers/net/usb/smsc75xx.c
@@ -2225,7 +2225,8 @@ static int smsc75xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 				dev->net->stats.rx_frame_errors++;
 		} else {
 			/* MAX_SINGLE_PACKET_SIZE + 4(CRC) + 2(COE) + 4(Vlan) */
-			if (unlikely(size > (MAX_SINGLE_PACKET_SIZE + ETH_HLEN + 12))) {
+			if (unlikely(size > (MAX_SINGLE_PACKET_SIZE + ETH_HLEN + 12) ||
+				     size > skb->len)) {
 				netif_dbg(dev, rx_err, dev->net,
 					  "size err rx_cmd_a=0x%08x\n",
 					  rx_cmd_a);
-- 
2.39.2

[PATCH 4.19 11/36] nvmet: avoid potential UAF in nvmet_req_complete()

[Greg Kroah-Hartman]

From: Damien Le Moal <damien.lemoal@opensource.wdc.com>

[ Upstream commit 6173a77b7e9d3e202bdb9897b23f2a8afe7bf286 ]

An nvme target ->queue_response() operation implementation may free the
request passed as argument. Such implementation potentially could result
in a use after free of the request pointer when percpu_ref_put() is
called in nvmet_req_complete().

Avoid such problem by using a local variable to save the sq pointer
before calling __nvmet_req_complete(), thus avoiding dereferencing the
req pointer after that function call.

Fixes: a07b4970f464 ("nvmet: add a generic NVMe target")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/core.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c
index 80b5aae1bdc9b..aff18a3f002f9 100644
--- a/drivers/nvme/target/core.c
+++ b/drivers/nvme/target/core.c
@@ -528,8 +528,10 @@ static void __nvmet_req_complete(struct nvmet_req *req, u16 status)
 
 void nvmet_req_complete(struct nvmet_req *req, u16 status)
 {
+	struct nvmet_sq *sq = req->sq;
+
 	__nvmet_req_complete(req, status);
-	percpu_ref_put(&req->sq->ref);
+	percpu_ref_put(&sq->ref);
 }
 EXPORT_SYMBOL_GPL(nvmet_req_complete);
 
-- 
2.39.2

[PATCH 4.19 12/36] block: sunvdc: add check for mdesc_grab() returning NULL

[Greg Kroah-Hartman]

From: Liang He <windhl@126.com>

[ Upstream commit 6030363199e3a6341afb467ddddbed56640cbf6a ]

In vdc_port_probe(), we should check the return value of mdesc_grab() as
it may return NULL, which can cause potential NPD bug.

Fixes: 43fdf27470b2 ("[SPARC64]: Abstract out mdesc accesses for better MD update handling.")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20230315062032.1741692-1-windhl@126.com
[axboe: style cleanup]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/sunvdc.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/block/sunvdc.c b/drivers/block/sunvdc.c
index 6b7b0d8a2acbc..d2e9ffd2255f4 100644
--- a/drivers/block/sunvdc.c
+++ b/drivers/block/sunvdc.c
@@ -947,6 +947,8 @@ static int vdc_port_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 	print_version();
 
 	hp = mdesc_grab();
+	if (!hp)
+		return -ENODEV;
 
 	err = -ENODEV;
 	if ((vdev->dev_no << PARTITION_SHIFT) & ~(u64)MINORMASK) {
-- 
2.39.2

[PATCH 4.19 13/36] ipv4: Fix incorrect table ID in IOCTL path

[Greg Kroah-Hartman]

From: Ido Schimmel <idosch@nvidia.com>

[ Upstream commit 8a2618e14f81604a9b6ad305d57e0c8da939cd65 ]

Commit f96a3d74554d ("ipv4: Fix incorrect route flushing when source
address is deleted") started to take the table ID field in the FIB info
structure into account when determining if two structures are identical
or not. This field is initialized using the 'fc_table' field in the
route configuration structure, which is not set when adding a route via
IOCTL.

The above can result in user space being able to install two identical
routes that only differ in the table ID field of their associated FIB
info.

Fix by initializing the table ID field in the route configuration
structure in the IOCTL path.

Before the fix:

 # ip route add default via 192.0.2.2
 # route add default gw 192.0.2.2
 # ip -4 r show default
 # default via 192.0.2.2 dev dummy10
 # default via 192.0.2.2 dev dummy10

After the fix:

 # ip route add default via 192.0.2.2
 # route add default gw 192.0.2.2
 SIOCADDRT: File exists
 # ip -4 r show default
 default via 192.0.2.2 dev dummy10

Audited the code paths to ensure there are no other paths that do not
properly initialize the route configuration structure when installing a
route.

Fixes: 5a56a0b3a45d ("net: Don't delete routes in different VRFs")
Fixes: f96a3d74554d ("ipv4: Fix incorrect route flushing when source address is deleted")
Reported-by: gaoxingwang <gaoxingwang1@huawei.com>
Link: https://lore.kernel.org/netdev/20230314144159.2354729-1-gaoxingwang1@huawei.com/
Tested-by: gaoxingwang <gaoxingwang1@huawei.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230315124009.4015212-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/fib_frontend.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index 1885a2fbad862..9aa48b4c40960 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -557,6 +557,9 @@ static int rtentry_to_fib_config(struct net *net, int cmd, struct rtentry *rt,
 			cfg->fc_scope = RT_SCOPE_UNIVERSE;
 	}
 
+	if (!cfg->fc_table)
+		cfg->fc_table = RT_TABLE_MAIN;
+
 	if (cmd == SIOCDELRT)
 		return 0;
 
-- 
2.39.2

[PATCH 4.19 14/36] net: usb: smsc75xx: Move packet length check to prevent kernel panic in skb_pull

[Greg Kroah-Hartman]

From: Szymon Heidrich <szymon.heidrich@gmail.com>

[ Upstream commit 43ffe6caccc7a1bb9d7442fbab521efbf6c1378c ]

Packet length check needs to be located after size and align_count
calculation to prevent kernel panic in skb_pull() in case
rx_cmd_a & RX_CMD_A_RED evaluates to true.

Fixes: d8b228318935 ("net: usb: smsc75xx: Limit packet length to skb->len")
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Link: https://lore.kernel.org/r/20230316110540.77531-1-szymon.heidrich@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/smsc75xx.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c
index b4705dee2b751..313a4b0edc6b3 100644
--- a/drivers/net/usb/smsc75xx.c
+++ b/drivers/net/usb/smsc75xx.c
@@ -2213,6 +2213,13 @@ static int smsc75xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 		size = (rx_cmd_a & RX_CMD_A_LEN) - RXW_PADDING;
 		align_count = (4 - ((size + RXW_PADDING) % 4)) % 4;
 
+		if (unlikely(size > skb->len)) {
+			netif_dbg(dev, rx_err, dev->net,
+				  "size err rx_cmd_a=0x%08x\n",
+				  rx_cmd_a);
+			return 0;
+		}
+
 		if (unlikely(rx_cmd_a & RX_CMD_A_RED)) {
 			netif_dbg(dev, rx_err, dev->net,
 				  "Error rx_cmd_a=0x%08x\n", rx_cmd_a);
@@ -2225,8 +2232,7 @@ static int smsc75xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 				dev->net->stats.rx_frame_errors++;
 		} else {
 			/* MAX_SINGLE_PACKET_SIZE + 4(CRC) + 2(COE) + 4(Vlan) */
-			if (unlikely(size > (MAX_SINGLE_PACKET_SIZE + ETH_HLEN + 12) ||
-				     size > skb->len)) {
+			if (unlikely(size > (MAX_SINGLE_PACKET_SIZE + ETH_HLEN + 12))) {
 				netif_dbg(dev, rx_err, dev->net,
 					  "size err rx_cmd_a=0x%08x\n",
 					  rx_cmd_a);
-- 
2.39.2

[PATCH 4.19 15/36] net/iucv: Fix size of interrupt data

[Greg Kroah-Hartman]

From: Alexandra Winter <wintera@linux.ibm.com>

[ Upstream commit 3d87debb8ed2649608ff432699e7c961c0c6f03b ]

iucv_irq_data needs to be 4 bytes larger.
These bytes are not used by the iucv module, but written by
the z/VM hypervisor in case a CPU is deconfigured.

Reported as:
BUG dma-kmalloc-64 (Not tainted): kmalloc Redzone overwritten
-----------------------------------------------------------------------------
0x0000000000400564-0x0000000000400567 @offset=1380. First byte 0x80 instead of 0xcc
Allocated in iucv_cpu_prepare+0x44/0xd0 age=167839 cpu=2 pid=1
__kmem_cache_alloc_node+0x166/0x450
kmalloc_node_trace+0x3a/0x70
iucv_cpu_prepare+0x44/0xd0
cpuhp_invoke_callback+0x156/0x2f0
cpuhp_issue_call+0xf0/0x298
__cpuhp_setup_state_cpuslocked+0x136/0x338
__cpuhp_setup_state+0xf4/0x288
iucv_init+0xf4/0x280
do_one_initcall+0x78/0x390
do_initcalls+0x11a/0x140
kernel_init_freeable+0x25e/0x2a0
kernel_init+0x2e/0x170
__ret_from_fork+0x3c/0x58
ret_from_fork+0xa/0x40
Freed in iucv_init+0x92/0x280 age=167839 cpu=2 pid=1
__kmem_cache_free+0x308/0x358
iucv_init+0x92/0x280
do_one_initcall+0x78/0x390
do_initcalls+0x11a/0x140
kernel_init_freeable+0x25e/0x2a0
kernel_init+0x2e/0x170
__ret_from_fork+0x3c/0x58
ret_from_fork+0xa/0x40
Slab 0x0000037200010000 objects=32 used=30 fp=0x0000000000400640 flags=0x1ffff00000010200(slab|head|node=0|zone=0|
Object 0x0000000000400540 @offset=1344 fp=0x0000000000000000
Redzone  0000000000400500: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Redzone  0000000000400510: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Redzone  0000000000400520: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Redzone  0000000000400530: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Object   0000000000400540: 00 01 00 03 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object   0000000000400550: f3 86 81 f2 f4 82 f8 82 f0 f0 f0 f0 f0 f0 f0 f2  ................
Object   0000000000400560: 00 00 00 00 80 00 00 00 cc cc cc cc cc cc cc cc  ................
Object   0000000000400570: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Redzone  0000000000400580: cc cc cc cc cc cc cc cc                          ........
Padding  00000000004005d4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
Padding  00000000004005e4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
Padding  00000000004005f4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a              ZZZZZZZZZZZZ
CPU: 6 PID: 121030 Comm: 116-pai-crypto. Not tainted 6.3.0-20230221.rc0.git4.99b8246b2d71.300.fc37.s390x+debug #1
Hardware name: IBM 3931 A01 704 (z/VM 7.3.0)
Call Trace:
[<000000032aa034ec>] dump_stack_lvl+0xac/0x100
[<0000000329f5a6cc>] check_bytes_and_report+0x104/0x140
[<0000000329f5aa78>] check_object+0x370/0x3c0
[<0000000329f5ede6>] free_debug_processing+0x15e/0x348
[<0000000329f5f06a>] free_to_partial_list+0x9a/0x2f0
[<0000000329f5f4a4>] __slab_free+0x1e4/0x3a8
[<0000000329f61768>] __kmem_cache_free+0x308/0x358
[<000000032a91465c>] iucv_cpu_dead+0x6c/0x88
[<0000000329c2fc66>] cpuhp_invoke_callback+0x156/0x2f0
[<000000032aa062da>] _cpu_down.constprop.0+0x22a/0x5e0
[<0000000329c3243e>] cpu_device_down+0x4e/0x78
[<000000032a61dee0>] device_offline+0xc8/0x118
[<000000032a61e048>] online_store+0x60/0xe0
[<000000032a08b6b0>] kernfs_fop_write_iter+0x150/0x1e8
[<0000000329fab65c>] vfs_write+0x174/0x360
[<0000000329fab9fc>] ksys_write+0x74/0x100
[<000000032aa03a5a>] __do_syscall+0x1da/0x208
[<000000032aa177b2>] system_call+0x82/0xb0
INFO: lockdep is turned off.
FIX dma-kmalloc-64: Restoring kmalloc Redzone 0x0000000000400564-0x0000000000400567=0xcc
FIX dma-kmalloc-64: Object at 0x0000000000400540 not freed

Fixes: 2356f4cb1911 ("[S390]: Rewrite of the IUCV base code, part 2")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://lore.kernel.org/r/20230315131435.4113889-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/iucv/iucv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/iucv/iucv.c b/net/iucv/iucv.c
index eb502c6290c2a..aacaa5119b456 100644
--- a/net/iucv/iucv.c
+++ b/net/iucv/iucv.c
@@ -119,7 +119,7 @@ struct iucv_irq_data {
 	u16 ippathid;
 	u8  ipflags1;
 	u8  iptype;
-	u32 res2[8];
+	u32 res2[9];
 };
 
 struct iucv_irq_list {
-- 
2.39.2

[PATCH 4.19 16/36] ethernet: sun: add check for the mdesc_grab()

[Greg Kroah-Hartman]

From: Liang He <windhl@126.com>

[ Upstream commit 90de546d9a0b3c771667af18bb3f80567eabb89b ]

In vnet_port_probe() and vsw_port_probe(), we should
check the return value of mdesc_grab() as it may
return NULL which can caused NPD bugs.

Fixes: 5d01fa0c6bd8 ("ldmvsw: Add ldmvsw.c driver code")
Fixes: 43fdf27470b2 ("[SPARC64]: Abstract out mdesc accesses for better MD update handling.")
Signed-off-by: Liang He <windhl@126.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/sun/ldmvsw.c  | 3 +++
 drivers/net/ethernet/sun/sunvnet.c | 3 +++
 2 files changed, 6 insertions(+)

diff --git a/drivers/net/ethernet/sun/ldmvsw.c b/drivers/net/ethernet/sun/ldmvsw.c
index 644e42c181ee6..1c9522ad31787 100644
--- a/drivers/net/ethernet/sun/ldmvsw.c
+++ b/drivers/net/ethernet/sun/ldmvsw.c
@@ -291,6 +291,9 @@ static int vsw_port_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 
 	hp = mdesc_grab();
 
+	if (!hp)
+		return -ENODEV;
+
 	rmac = mdesc_get_property(hp, vdev->mp, remote_macaddr_prop, &len);
 	err = -ENODEV;
 	if (!rmac) {
diff --git a/drivers/net/ethernet/sun/sunvnet.c b/drivers/net/ethernet/sun/sunvnet.c
index 590172818b922..3a1f0653cfb76 100644
--- a/drivers/net/ethernet/sun/sunvnet.c
+++ b/drivers/net/ethernet/sun/sunvnet.c
@@ -432,6 +432,9 @@ static int vnet_port_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 
 	hp = mdesc_grab();
 
+	if (!hp)
+		return -ENODEV;
+
 	vp = vnet_find_parent(hp, vdev->mp, vdev);
 	if (IS_ERR(vp)) {
 		pr_err("Cannot find port parent vnet\n");
-- 
2.39.2

[PATCH 4.19 17/36] hwmon: (adt7475) Display smoothing attributes in correct order

[Greg Kroah-Hartman]

From: Tony O'Brien <tony.obrien@alliedtelesis.co.nz>

[ Upstream commit 5f8d1e3b6f9b5971f9c06d5846ce00c49e3a8d94 ]

Throughout the ADT7475 driver, attributes relating to the temperature
sensors are displayed in the order Remote 1, Local, Remote 2.  Make
temp_st_show() conform to this expectation so that values set by
temp_st_store() can be displayed using the correct attribute.

Fixes: 8f05bcc33e74 ("hwmon: (adt7475) temperature smoothing")
Signed-off-by: Tony O'Brien <tony.obrien@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20230222005228.158661-2-tony.obrien@alliedtelesis.co.nz
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/adt7475.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index 0a87c5b512862..bde5fe10a95a5 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -554,11 +554,11 @@ static ssize_t show_temp_st(struct device *dev, struct device_attribute *attr,
 		val = data->enh_acoustics[0] & 0xf;
 		break;
 	case 1:
-		val = (data->enh_acoustics[1] >> 4) & 0xf;
+		val = data->enh_acoustics[1] & 0xf;
 		break;
 	case 2:
 	default:
-		val = data->enh_acoustics[1] & 0xf;
+		val = (data->enh_acoustics[1] >> 4) & 0xf;
 		break;
 	}
 
-- 
2.39.2

[PATCH 4.19 18/36] hwmon: (adt7475) Fix masking of hysteresis registers

[Greg Kroah-Hartman]

From: Tony O'Brien <tony.obrien@alliedtelesis.co.nz>

[ Upstream commit 48e8186870d9d0902e712d601ccb7098cb220688 ]

The wrong bits are masked in the hysteresis register; indices 0 and 2
should zero bits [7:4] and preserve bits [3:0], and index 1 should zero
bits [3:0] and preserve bits [7:4].

Fixes: 1c301fc5394f ("hwmon: Add a driver for the ADT7475 hardware monitoring chip")
Signed-off-by: Tony O'Brien <tony.obrien@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20230222005228.158661-3-tony.obrien@alliedtelesis.co.nz
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/adt7475.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index bde5fe10a95a5..2db2665dcd4dc 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -485,10 +485,10 @@ static ssize_t set_temp(struct device *dev, struct device_attribute *attr,
 		val = (temp - val) / 1000;
 
 		if (sattr->index != 1) {
-			data->temp[HYSTERSIS][sattr->index] &= 0xF0;
+			data->temp[HYSTERSIS][sattr->index] &= 0x0F;
 			data->temp[HYSTERSIS][sattr->index] |= (val & 0xF) << 4;
 		} else {
-			data->temp[HYSTERSIS][sattr->index] &= 0x0F;
+			data->temp[HYSTERSIS][sattr->index] &= 0xF0;
 			data->temp[HYSTERSIS][sattr->index] |= (val & 0xF);
 		}
 
-- 
2.39.2

[PATCH 4.19 19/36] hwmon: (xgene) Fix use after free bug in xgene_hwmon_remove due to race condition

[Greg Kroah-Hartman]

From: Zheng Wang <zyytlz.wz@163.com>

[ Upstream commit cb090e64cf25602b9adaf32d5dfc9c8bec493cd1 ]

In xgene_hwmon_probe, &ctx->workq is bound with xgene_hwmon_evt_work.
Then it will be started.

If we remove the driver which will call xgene_hwmon_remove to clean up,
there may be unfinished work.

The possible sequence is as follows:

Fix it by finishing the work before cleanup in xgene_hwmon_remove.

CPU0                  CPU1

                    |xgene_hwmon_evt_work
xgene_hwmon_remove   |
kfifo_free(&ctx->async_msg_fifo);|
                    |
                    |kfifo_out_spinlocked
                    |//use &ctx->async_msg_fifo
Fixes: 2ca492e22cb7 ("hwmon: (xgene) Fix crash when alarm occurs before driver probe")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Link: https://lore.kernel.org/r/20230310084007.1403388-1-zyytlz.wz@163.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/xgene-hwmon.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/hwmon/xgene-hwmon.c b/drivers/hwmon/xgene-hwmon.c
index a3cd91f232679..2dd19a4203052 100644
--- a/drivers/hwmon/xgene-hwmon.c
+++ b/drivers/hwmon/xgene-hwmon.c
@@ -780,6 +780,7 @@ static int xgene_hwmon_remove(struct platform_device *pdev)
 {
 	struct xgene_hwmon_dev *ctx = platform_get_drvdata(pdev);
 
+	cancel_work_sync(&ctx->workq);
 	hwmon_device_unregister(ctx->hwmon_dev);
 	kfifo_free(&ctx->async_msg_fifo);
 	if (acpi_disabled)
-- 
2.39.2

[PATCH 4.19 20/36] media: m5mols: fix off-by-one loop termination error

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit efbcbb12ee99f750c9f25c873b55ad774871de2a ]

The __find_restype() function loops over the m5mols_default_ffmt[]
array, and the termination condition ends up being wrong: instead of
stopping when the iterator becomes the size of the array it traverses,
it stops after it has already overshot the array.

Now, in practice this doesn't likely matter, because the code will
always find the entry it looks for, and will thus return early and never
hit that last extra iteration.

But it turns out that clang will unroll the loop fully, because it has
only two iterations (well, three due to the off-by-one bug), and then
clang will end up just giving up in the middle of the loop unrolling
when it notices that the code walks past the end of the array.

And that made 'objtool' very unhappy indeed, because the generated code
just falls off the edge of the universe, and ends up falling through to
the next function, causing this warning:

   drivers/media/i2c/m5mols/m5mols.o: warning: objtool: m5mols_set_fmt() falls through to next function m5mols_get_frame_desc()

Fix the loop ending condition.

Reported-by: Jens Axboe <axboe@kernel.dk>
Analyzed-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Analyzed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/linux-block/CAHk-=wgTSdKYbmB1JYM5vmHMcD9J9UZr0mn7BOYM_LudrP+Xvw@mail.gmail.com/
Fixes: bc125106f8af ("[media] Add support for M-5MOLS 8 Mega Pixel camera ISP")
Cc: HeungJun, Kim <riverful.kim@samsung.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/m5mols/m5mols_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/i2c/m5mols/m5mols_core.c b/drivers/media/i2c/m5mols/m5mols_core.c
index d9a9644306096..9e6827dedab30 100644
--- a/drivers/media/i2c/m5mols/m5mols_core.c
+++ b/drivers/media/i2c/m5mols/m5mols_core.c
@@ -492,7 +492,7 @@ static enum m5mols_restype __find_restype(u32 code)
 	do {
 		if (code == m5mols_default_ffmt[type].code)
 			return type;
-	} while (type++ != SIZE_DEFAULT_FFMT);
+	} while (++type != SIZE_DEFAULT_FFMT);
 
 	return 0;
 }
-- 
2.39.2

[PATCH 4.19 21/36] mmc: atmel-mci: fix race between stop command and start of next command

[Greg Kroah-Hartman]

From: Tobias Schramm <t.schramm@manjaro.org>

[ Upstream commit eca5bd666b0aa7dc0bca63292e4778968241134e ]

This commit fixes a race between completion of stop command and start of a
new command.
Previously the command ready interrupt was enabled before stop command
was written to the command register. This caused the command ready
interrupt to fire immediately since the CMDRDY flag is asserted constantly
while there is no command in progress.
Consequently the command state machine will immediately advance to the
next state when the tasklet function is executed again, no matter
actual completion state of the stop command.
Thus a new command can then be dispatched immediately, interrupting and
corrupting the stop command on the CMD line.
Fix that by dropping the command ready interrupt enable before calling
atmci_send_stop_cmd. atmci_send_stop_cmd does already enable the
command ready interrupt, no further writes to ATMCI_IER are necessary.

Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/20221230194315.809903-2-t.schramm@manjaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/atmel-mci.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index d40bab3d9f4af..fb435a8d37213 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -1857,7 +1857,6 @@ static void atmci_tasklet_func(unsigned long priv)
 				atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
 				state = STATE_WAITING_NOTBUSY;
 			} else if (host->mrq->stop) {
-				atmci_writel(host, ATMCI_IER, ATMCI_CMDRDY);
 				atmci_send_stop_cmd(host, data);
 				state = STATE_SENDING_STOP;
 			} else {
@@ -1890,8 +1889,6 @@ static void atmci_tasklet_func(unsigned long priv)
 				 * command to send.
 				 */
 				if (host->mrq->stop) {
-					atmci_writel(host, ATMCI_IER,
-					             ATMCI_CMDRDY);
 					atmci_send_stop_cmd(host, data);
 					state = STATE_SENDING_STOP;
 				} else {
-- 
2.39.2

[PATCH 4.19 22/36] jffs2: correct logic when creating a hole in jffs2_write_begin

[Greg Kroah-Hartman]

From: Yifei Liu <yifeliu@cs.stonybrook.edu>

[ Upstream commit 23892d383bee15b64f5463bd7195615734bb2415 ]

Bug description and fix:

1. Write data to a file, say all 1s from offset 0 to 16.

2. Truncate the file to a smaller size, say 8 bytes.

3. Write new bytes (say 2s) from an offset past the original size of the
file, say at offset 20, for 4 bytes.  This is supposed to create a "hole"
in the file, meaning that the bytes from offset 8 (where it was truncated
above) up to the new write at offset 20, should all be 0s (zeros).

4. Flush all caches using "echo 3 > /proc/sys/vm/drop_caches" (or unmount
and remount) the f/s.

5. Check the content of the file.  It is wrong.  The 1s that used to be
between bytes 9 and 16, before the truncation, have REAPPEARED (they should
be 0s).

We wrote a script and helper C program to reproduce the bug
(reproduce_jffs2_write_begin_issue.sh, write_file.c, and Makefile).  We can
make them available to anyone.

The above example is shown when writing a small file within the same first
page.  But the bug happens for larger files, as long as steps 1, 2, and 3
above all happen within the same page.

The problem was traced to the jffs2_write_begin code, where it goes into an
'if' statement intended to handle writes past the current EOF (i.e., writes
that may create a hole).  The code computes a 'pageofs' that is the floor
of the write position (pos), aligned to the page size boundary.  In other
words, 'pageofs' will never be larger than 'pos'.  The code then sets the
internal jffs2_raw_inode->isize to the size of max(current inode size,
pageofs) but that is wrong: the new file size should be the 'pos', which is
larger than both the current inode size and pageofs.

Similarly, the code incorrectly sets the internal jffs2_raw_inode->dsize to
the difference between the pageofs minus current inode size; instead it
should be the current pos minus the current inode size.  Finally,
inode->i_size was also set incorrectly.

The patch below fixes this bug.  The bug was discovered using a new tool
for finding f/s bugs using model checking, called MCFS (Model Checking File
Systems).

Signed-off-by: Yifei Liu <yifeliu@cs.stonybrook.edu>
Signed-off-by: Erez Zadok <ezk@cs.stonybrook.edu>
Signed-off-by: Manish Adkar <madkar@cs.stonybrook.edu>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jffs2/file.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/fs/jffs2/file.c b/fs/jffs2/file.c
index 3047872fdac9b..bf3d8a4516a52 100644
--- a/fs/jffs2/file.c
+++ b/fs/jffs2/file.c
@@ -137,19 +137,18 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping,
 	struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode);
 	struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb);
 	pgoff_t index = pos >> PAGE_SHIFT;
-	uint32_t pageofs = index << PAGE_SHIFT;
 	int ret = 0;
 
 	jffs2_dbg(1, "%s()\n", __func__);
 
-	if (pageofs > inode->i_size) {
-		/* Make new hole frag from old EOF to new page */
+	if (pos > inode->i_size) {
+		/* Make new hole frag from old EOF to new position */
 		struct jffs2_raw_inode ri;
 		struct jffs2_full_dnode *fn;
 		uint32_t alloc_len;
 
-		jffs2_dbg(1, "Writing new hole frag 0x%x-0x%x between current EOF and new page\n",
-			  (unsigned int)inode->i_size, pageofs);
+		jffs2_dbg(1, "Writing new hole frag 0x%x-0x%x between current EOF and new position\n",
+			  (unsigned int)inode->i_size, (uint32_t)pos);
 
 		ret = jffs2_reserve_space(c, sizeof(ri), &alloc_len,
 					  ALLOC_NORMAL, JFFS2_SUMMARY_INODE_SIZE);
@@ -169,10 +168,10 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping,
 		ri.mode = cpu_to_jemode(inode->i_mode);
 		ri.uid = cpu_to_je16(i_uid_read(inode));
 		ri.gid = cpu_to_je16(i_gid_read(inode));
-		ri.isize = cpu_to_je32(max((uint32_t)inode->i_size, pageofs));
+		ri.isize = cpu_to_je32((uint32_t)pos);
 		ri.atime = ri.ctime = ri.mtime = cpu_to_je32(JFFS2_NOW());
 		ri.offset = cpu_to_je32(inode->i_size);
-		ri.dsize = cpu_to_je32(pageofs - inode->i_size);
+		ri.dsize = cpu_to_je32((uint32_t)pos - inode->i_size);
 		ri.csize = cpu_to_je32(0);
 		ri.compr = JFFS2_COMPR_ZERO;
 		ri.node_crc = cpu_to_je32(crc32(0, &ri, sizeof(ri)-8));
@@ -202,7 +201,7 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping,
 			goto out_err;
 		}
 		jffs2_complete_reservation(c);
-		inode->i_size = pageofs;
+		inode->i_size = pos;
 		mutex_unlock(&f->sem);
 	}
 
-- 
2.39.2

[PATCH 4.19 23/36] rust: arch/um: Disable FP/SIMD instruction to match x86

[Greg Kroah-Hartman]

From: David Gow <davidgow@google.com>

[ Upstream commit 8849818679478933dd1d9718741f4daa3f4e8b86 ]

The kernel disables all SSE and similar FP/SIMD instructions on
x86-based architectures (partly because we shouldn't be using floats in
the kernel, and partly to avoid the need for stack alignment, see:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=53383 )

UML does not do the same thing, which isn't in itself a problem, but
does add to the list of differences between UML and "normal" x86 builds.

In addition, there was a crash bug with LLVM < 15 / rustc < 1.65 when
building with SSE, so disabling it fixes rust builds with earlier
compiler versions, see:
https://github.com/Rust-for-Linux/linux/pull/881

Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Sergio González Collado <sergio.collado@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/Makefile.um | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/x86/Makefile.um b/arch/x86/Makefile.um
index 91085a08de6cb..3694beda02c8a 100644
--- a/arch/x86/Makefile.um
+++ b/arch/x86/Makefile.um
@@ -1,6 +1,12 @@
 # SPDX-License-Identifier: GPL-2.0
 core-y += arch/x86/crypto/
 
+#
+# Disable SSE and other FP/SIMD instructions to match normal x86
+#
+KBUILD_CFLAGS += -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -mno-avx
+KBUILD_RUSTFLAGS += -Ctarget-feature=-sse,-sse2,-sse3,-ssse3,-sse4.1,-sse4.2,-avx,-avx2
+
 ifeq ($(CONFIG_X86_32),y)
 START := 0x8048000
 
-- 
2.39.2

[PATCH 4.19 24/36] ext4: fail ext4_iget if special inode unallocated

[Greg Kroah-Hartman]

From: Baokun Li <libaokun1@huawei.com>

[ Upstream commit 5cd740287ae5e3f9d1c46f5bfe8778972fd6d3fe ]

In ext4_fill_super(), EXT4_ORPHAN_FS flag is cleared after
ext4_orphan_cleanup() is executed. Therefore, when __ext4_iget() is
called to get an inode whose i_nlink is 0 when the flag exists, no error
is returned. If the inode is a special inode, a null pointer dereference
may occur. If the value of i_nlink is 0 for any inodes (except boot loader
inodes) got by using the EXT4_IGET_SPECIAL flag, the current file system
is corrupted. Therefore, make the ext4_iget() function return an error if
it gets such an abnormal special inode.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=199179
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216541
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216539
Reported-by: Luís Henriques <lhenriques@suse.de>
Suggested-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230107032126.4165860-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/inode.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 6e7989b04d2bf..e844d91c461b0 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -4947,13 +4947,6 @@ struct inode *__ext4_iget(struct super_block *sb, unsigned long ino,
 		goto bad_inode;
 	raw_inode = ext4_raw_inode(&iloc);
 
-	if ((ino == EXT4_ROOT_INO) && (raw_inode->i_links_count == 0)) {
-		ext4_error_inode(inode, function, line, 0,
-				 "iget: root inode unallocated");
-		ret = -EFSCORRUPTED;
-		goto bad_inode;
-	}
-
 	if ((flags & EXT4_IGET_HANDLE) &&
 	    (raw_inode->i_links_count == 0) && (raw_inode->i_mode == 0)) {
 		ret = -ESTALE;
@@ -5024,11 +5017,16 @@ struct inode *__ext4_iget(struct super_block *sb, unsigned long ino,
 	 * NeilBrown 1999oct15
 	 */
 	if (inode->i_nlink == 0) {
-		if ((inode->i_mode == 0 ||
+		if ((inode->i_mode == 0 || flags & EXT4_IGET_SPECIAL ||
 		     !(EXT4_SB(inode->i_sb)->s_mount_state & EXT4_ORPHAN_FS)) &&
 		    ino != EXT4_BOOT_LOADER_INO) {
-			/* this inode is deleted */
-			ret = -ESTALE;
+			/* this inode is deleted or unallocated */
+			if (flags & EXT4_IGET_SPECIAL) {
+				ext4_error_inode(inode, function, line, 0,
+						 "iget: special inode unallocated");
+				ret = -EFSCORRUPTED;
+			} else
+				ret = -ESTALE;
 			goto bad_inode;
 		}
 		/* The only unlinked inodes we let through here have
-- 
2.39.2

[PATCH 4.19 25/36] ext4: fix task hung in ext4_xattr_delete_inode

[Greg Kroah-Hartman]

From: Baokun Li <libaokun1@huawei.com>

[ Upstream commit 0f7bfd6f8164be32dbbdf36aa1e5d00485c53cd7 ]

Syzbot reported a hung task problem:
==================================================================
INFO: task syz-executor232:5073 blocked for more than 143 seconds.
      Not tainted 6.2.0-rc2-syzkaller-00024-g512dee0c00ad #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-exec232 state:D stack:21024 pid:5073 ppid:5072 flags:0x00004004
Call Trace:
 <TASK>
 context_switch kernel/sched/core.c:5244 [inline]
 __schedule+0x995/0xe20 kernel/sched/core.c:6555
 schedule+0xcb/0x190 kernel/sched/core.c:6631
 __wait_on_freeing_inode fs/inode.c:2196 [inline]
 find_inode_fast+0x35a/0x4c0 fs/inode.c:950
 iget_locked+0xb1/0x830 fs/inode.c:1273
 __ext4_iget+0x22e/0x3ed0 fs/ext4/inode.c:4861
 ext4_xattr_inode_iget+0x68/0x4e0 fs/ext4/xattr.c:389
 ext4_xattr_inode_dec_ref_all+0x1a7/0xe50 fs/ext4/xattr.c:1148
 ext4_xattr_delete_inode+0xb04/0xcd0 fs/ext4/xattr.c:2880
 ext4_evict_inode+0xd7c/0x10b0 fs/ext4/inode.c:296
 evict+0x2a4/0x620 fs/inode.c:664
 ext4_orphan_cleanup+0xb60/0x1340 fs/ext4/orphan.c:474
 __ext4_fill_super fs/ext4/super.c:5516 [inline]
 ext4_fill_super+0x81cd/0x8700 fs/ext4/super.c:5644
 get_tree_bdev+0x400/0x620 fs/super.c:1282
 vfs_get_tree+0x88/0x270 fs/super.c:1489
 do_new_mount+0x289/0xad0 fs/namespace.c:3145
 do_mount fs/namespace.c:3488 [inline]
 __do_sys_mount fs/namespace.c:3697 [inline]
 __se_sys_mount+0x2d3/0x3c0 fs/namespace.c:3674
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fa5406fd5ea
RSP: 002b:00007ffc7232f968 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fa5406fd5ea
RDX: 0000000020000440 RSI: 0000000020000000 RDI: 00007ffc7232f970
RBP: 00007ffc7232f970 R08: 00007ffc7232f9b0 R09: 0000000000000432
R10: 0000000000804a03 R11: 0000000000000202 R12: 0000000000000004
R13: 0000555556a7a2c0 R14: 00007ffc7232f9b0 R15: 0000000000000000
 </TASK>
==================================================================

The problem is that the inode contains an xattr entry with ea_inum of 15
when cleaning up an orphan inode <15>. When evict inode <15>, the reference
counting of the corresponding EA inode is decreased. When EA inode <15> is
found by find_inode_fast() in __ext4_iget(), it is found that the EA inode
holds the I_FREEING flag and waits for the EA inode to complete deletion.
As a result, when inode <15> is being deleted, we wait for inode <15> to
complete the deletion, resulting in an infinite loop and triggering Hung
Task. To solve this problem, we only need to check whether the ino of EA
inode and parent is the same before getting EA inode.

Link: https://syzkaller.appspot.com/bug?extid=77d6fcc37bbb92f26048
Reported-by: syzbot+77d6fcc37bbb92f26048@syzkaller.appspotmail.com
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230110133436.996350-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/xattr.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c
index 2a70b7556e419..a91b02091b160 100644
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -384,6 +384,17 @@ static int ext4_xattr_inode_iget(struct inode *parent, unsigned long ea_ino,
 	struct inode *inode;
 	int err;
 
+	/*
+	 * We have to check for this corruption early as otherwise
+	 * iget_locked() could wait indefinitely for the state of our
+	 * parent inode.
+	 */
+	if (parent->i_ino == ea_ino) {
+		ext4_error(parent->i_sb,
+			   "Parent and EA inode have the same ino %lu", ea_ino);
+		return -EFSCORRUPTED;
+	}
+
 	inode = ext4_iget(parent->i_sb, ea_ino, EXT4_IGET_NORMAL);
 	if (IS_ERR(inode)) {
 		err = PTR_ERR(inode);
-- 
2.39.2

[PATCH 4.19 26/36] drm/amdkfd: Fix an illegal memory access

[Greg Kroah-Hartman]

From: Qu Huang <qu.huang@linux.dev>

[ Upstream commit 4fc8fff378b2f2039f2a666d9f8c570f4e58352c ]

In the kfd_wait_on_events() function, the kfd_event_waiter structure is
allocated by alloc_event_waiters(), but the event field of the waiter
structure is not initialized; When copy_from_user() fails in the
kfd_wait_on_events() function, it will enter exception handling to
release the previously allocated memory of the waiter structure;
Due to the event field of the waiters structure being accessed
in the free_waiters() function, this results in illegal memory access
and system crash, here is the crash log:

localhost kernel: RIP: 0010:native_queued_spin_lock_slowpath+0x185/0x1e0
localhost kernel: RSP: 0018:ffffaa53c362bd60 EFLAGS: 00010082
localhost kernel: RAX: ff3d3d6bff4007cb RBX: 0000000000000282 RCX: 00000000002c0000
localhost kernel: RDX: ffff9e855eeacb80 RSI: 000000000000279c RDI: ffffe7088f6a21d0
localhost kernel: RBP: ffffe7088f6a21d0 R08: 00000000002c0000 R09: ffffaa53c362be64
localhost kernel: R10: ffffaa53c362bbd8 R11: 0000000000000001 R12: 0000000000000002
localhost kernel: R13: ffff9e7ead15d600 R14: 0000000000000000 R15: ffff9e7ead15d698
localhost kernel: FS:  0000152a3d111700(0000) GS:ffff9e855ee80000(0000) knlGS:0000000000000000
localhost kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
localhost kernel: CR2: 0000152938000010 CR3: 000000044d7a4000 CR4: 00000000003506e0
localhost kernel: Call Trace:
localhost kernel: _raw_spin_lock_irqsave+0x30/0x40
localhost kernel: remove_wait_queue+0x12/0x50
localhost kernel: kfd_wait_on_events+0x1b6/0x490 [hydcu]
localhost kernel: ? ftrace_graph_caller+0xa0/0xa0
localhost kernel: kfd_ioctl+0x38c/0x4a0 [hydcu]
localhost kernel: ? kfd_ioctl_set_trap_handler+0x70/0x70 [hydcu]
localhost kernel: ? kfd_ioctl_create_queue+0x5a0/0x5a0 [hydcu]
localhost kernel: ? ftrace_graph_caller+0xa0/0xa0
localhost kernel: __x64_sys_ioctl+0x8e/0xd0
localhost kernel: ? syscall_trace_enter.isra.18+0x143/0x1b0
localhost kernel: do_syscall_64+0x33/0x80
localhost kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9
localhost kernel: RIP: 0033:0x152a4dff68d7

Allocate the structure with kcalloc, and remove redundant 0-initialization
and a redundant loop condition check.

Signed-off-by: Qu Huang <qu.huang@linux.dev>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdkfd/kfd_events.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_events.c b/drivers/gpu/drm/amd/amdkfd/kfd_events.c
index 892077377339a..8f23192b67095 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_events.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_events.c
@@ -529,16 +529,13 @@ static struct kfd_event_waiter *alloc_event_waiters(uint32_t num_events)
 	struct kfd_event_waiter *event_waiters;
 	uint32_t i;
 
-	event_waiters = kmalloc_array(num_events,
-					sizeof(struct kfd_event_waiter),
-					GFP_KERNEL);
+	event_waiters = kcalloc(num_events, sizeof(struct kfd_event_waiter),
+				GFP_KERNEL);
 	if (!event_waiters)
 		return NULL;
 
-	for (i = 0; (event_waiters) && (i < num_events) ; i++) {
+	for (i = 0; i < num_events; i++)
 		init_wait(&event_waiters[i].wait);
-		event_waiters[i].activated = false;
-	}
 
 	return event_waiters;
 }
-- 
2.39.2

[PATCH 4.19 27/36] sh: intc: Avoid spurious sizeof-pointer-div warning

[Greg Kroah-Hartman]

From: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>

[ Upstream commit 250870824c1cf199b032b1ef889c8e8d69d9123a ]

GCC warns about the pattern sizeof(void*)/sizeof(void), as it looks like
the abuse of a pattern to calculate the array size. This pattern appears
in the unevaluated part of the ternary operator in _INTC_ARRAY if the
parameter is NULL.

The replacement uses an alternate approach to return 0 in case of NULL
which does not generate the pattern sizeof(void*)/sizeof(void), but still
emits the warning if _INTC_ARRAY is called with a nonarray parameter.

This patch is required for successful compilation with -Werror enabled.

The idea to use _Generic for type distinction is taken from Comment #7
in https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108483 by Jakub Jelinek

Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/619fa552-c988-35e5-b1d7-fe256c46a272@mkarcher.dialup.fu-berlin.de
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/sh_intc.h | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/include/linux/sh_intc.h b/include/linux/sh_intc.h
index c255273b02810..37ad81058d6ae 100644
--- a/include/linux/sh_intc.h
+++ b/include/linux/sh_intc.h
@@ -97,7 +97,10 @@ struct intc_hw_desc {
 	unsigned int nr_subgroups;
 };
 
-#define _INTC_ARRAY(a) a, __same_type(a, NULL) ? 0 : sizeof(a)/sizeof(*a)
+#define _INTC_SIZEOF_OR_ZERO(a) (_Generic(a,                 \
+                                 typeof(NULL):  0,           \
+                                 default:       sizeof(a)))
+#define _INTC_ARRAY(a) a, _INTC_SIZEOF_OR_ZERO(a)/sizeof(*a)
 
 #define INTC_HW_DESC(vectors, groups, mask_regs,	\
 		     prio_regs,	sense_regs, ack_regs)	\
-- 
2.39.2

[PATCH 4.19 28/36] tracing: Check field value in hist_field_name()

[Greg Kroah-Hartman]

From: Steven Rostedt (Google) <rostedt@goodmis.org>

commit 9f116f76fa8c04c81aef33ad870dbf9a158e5b70 upstream.

The function hist_field_name() cannot handle being passed a NULL field
parameter. It should never be NULL, but due to a previous bug, NULL was
passed to the function and the kernel crashed due to a NULL dereference.
Mark Rutland reported this to me on IRC.

The bug was fixed, but to prevent future bugs from crashing the kernel,
check the field and add a WARN_ON() if it is NULL.

Link: https://lkml.kernel.org/r/20230302020810.762384440@goodmis.org

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reported-by: Mark Rutland <mark.rutland@arm.com>
Fixes: c6afad49d127f ("tracing: Add hist trigger 'sym' and 'sym-offset' modifiers")
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/trace/trace_events_hist.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/kernel/trace/trace_events_hist.c
+++ b/kernel/trace/trace_events_hist.c
@@ -1764,6 +1764,9 @@ static const char *hist_field_name(struc
 {
 	const char *field_name = "";
 
+	if (WARN_ON_ONCE(!field))
+		return field_name;
+
 	if (level > 1)
 		return field_name;
 

[PATCH 4.19 29/36] tracing: Make tracepoint lockdep check actually test something

[Greg Kroah-Hartman]

From: Steven Rostedt (Google) <rostedt@goodmis.org>

commit c2679254b9c9980d9045f0f722cf093a2b1f7590 upstream.

A while ago where the trace events had the following:

   rcu_read_lock_sched_notrace();
   rcu_dereference_sched(...);
   rcu_read_unlock_sched_notrace();

If the tracepoint is enabled, it could trigger RCU issues if called in
the wrong place. And this warning was only triggered if lockdep was
enabled. If the tracepoint was never enabled with lockdep, the bug would
not be caught. To handle this, the above sequence was done when lockdep
was enabled regardless if the tracepoint was enabled or not (although the
always enabled code really didn't do anything, it would still trigger a
warning).

But a lot has changed since that lockdep code was added. One is, that
sequence no longer triggers any warning. Another is, the tracepoint when
enabled doesn't even do that sequence anymore.

The main check we care about today is whether RCU is "watching" or not.
So if lockdep is enabled, always check if rcu_is_watching() which will
trigger a warning if it is not (tracepoints require RCU to be watching).

Note, that old sequence did add a bit of overhead when lockdep was enabled,
and with the latest kernel updates, would cause the system to slow down
enough to trigger kernel "stalled" warnings.

Link: http://lore.kernel.org/lkml/20140806181801.GA4605@redhat.com
Link: http://lore.kernel.org/lkml/20140807175204.C257CAC5@viggo.jf.intel.com
Link: https://lore.kernel.org/lkml/20230307184645.521db5c9@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20230310172856.77406446@gandalf.local.home

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Fixes: e6753f23d961 ("tracepoint: Make rcuidle tracepoint callers use SRCU")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/tracepoint.h |   15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

--- a/include/linux/tracepoint.h
+++ b/include/linux/tracepoint.h
@@ -233,12 +233,11 @@ static inline struct tracepoint *tracepo
  * not add unwanted padding between the beginning of the section and the
  * structure. Force alignment to the same alignment as the section start.
  *
- * When lockdep is enabled, we make sure to always do the RCU portions of
- * the tracepoint code, regardless of whether tracing is on. However,
- * don't check if the condition is false, due to interaction with idle
- * instrumentation. This lets us find RCU issues triggered with tracepoints
- * even when this tracepoint is off. This code has no purpose other than
- * poking RCU a bit.
+ * When lockdep is enabled, we make sure to always test if RCU is
+ * "watching" regardless if the tracepoint is enabled or not. Tracepoints
+ * require RCU to be active, and it should always warn at the tracepoint
+ * site if it is not watching, as it will need to be active when the
+ * tracepoint is enabled.
  */
 #define __DECLARE_TRACE(name, proto, args, cond, data_proto, data_args) \
 	extern struct tracepoint __tracepoint_##name;			\
@@ -250,9 +249,7 @@ static inline struct tracepoint *tracepo
 				TP_ARGS(data_args),			\
 				TP_CONDITION(cond), 0);			\
 		if (IS_ENABLED(CONFIG_LOCKDEP) && (cond)) {		\
-			rcu_read_lock_sched_notrace();			\
-			rcu_dereference_sched(__tracepoint_##name.funcs);\
-			rcu_read_unlock_sched_notrace();		\
+			WARN_ON_ONCE(!rcu_is_watching());		\
 		}							\
 	}								\
 	__DECLARE_TRACE_RCU(name, PARAMS(proto), PARAMS(args),		\

[PATCH 4.19 30/36] ftrace: Fix invalid address access in lookup_rec() when index is 0

[Greg Kroah-Hartman]

From: Chen Zhongjin <chenzhongjin@huawei.com>

commit ee92fa443358f4fc0017c1d0d325c27b37802504 upstream.

KASAN reported follow problem:

 BUG: KASAN: use-after-free in lookup_rec
 Read of size 8 at addr ffff000199270ff0 by task modprobe
 CPU: 2 Comm: modprobe
 Call trace:
  kasan_report
  __asan_load8
  lookup_rec
  ftrace_location
  arch_check_ftrace_location
  check_kprobe_address_safe
  register_kprobe

When checking pg->records[pg->index - 1].ip in lookup_rec(), it can get a
pg which is newly added to ftrace_pages_start in ftrace_process_locs().
Before the first pg->index++, index is 0 and accessing pg->records[-1].ip
will cause this problem.

Don't check the ip when pg->index is 0.

Link: https://lore.kernel.org/linux-trace-kernel/20230309080230.36064-1-chenzhongjin@huawei.com

Cc: stable@vger.kernel.org
Fixes: 9644302e3315 ("ftrace: Speed up search by skipping pages by address")
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/trace/ftrace.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -1581,7 +1581,8 @@ unsigned long ftrace_location_range(unsi
 	key.flags = end;	/* overload flags, as it is unsigned long */
 
 	for (pg = ftrace_pages_start; pg; pg = pg->next) {
-		if (end < pg->records[0].ip ||
+		if (pg->index == 0 ||
+		    end < pg->records[0].ip ||
 		    start >= (pg->records[pg->index - 1].ip + MCOUNT_INSN_SIZE))
 			continue;
 		rec = bsearch(&key, pg->records, pg->index,

[PATCH 4.19 31/36] fbdev: stifb: Provide valid pixelclock and add fb_check_var() checks

[Greg Kroah-Hartman]

From: Helge Deller <deller@gmx.de>

commit 203873a535d627c668f293be0cb73e26c30f9cc7 upstream.

Find a valid modeline depending on the machine graphic card
configuration and add the fb_check_var() function to validate
Xorg provided graphics settings.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/video/fbdev/stifb.c |   27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

--- a/drivers/video/fbdev/stifb.c
+++ b/drivers/video/fbdev/stifb.c
@@ -922,6 +922,28 @@ SETUP_HCRX(struct stifb_info *fb)
 /* ------------------- driver specific functions --------------------------- */
 
 static int
+stifb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+	struct stifb_info *fb = container_of(info, struct stifb_info, info);
+
+	if (var->xres != fb->info.var.xres ||
+	    var->yres != fb->info.var.yres ||
+	    var->bits_per_pixel != fb->info.var.bits_per_pixel)
+		return -EINVAL;
+
+	var->xres_virtual = var->xres;
+	var->yres_virtual = var->yres;
+	var->xoffset = 0;
+	var->yoffset = 0;
+	var->grayscale = fb->info.var.grayscale;
+	var->red.length = fb->info.var.red.length;
+	var->green.length = fb->info.var.green.length;
+	var->blue.length = fb->info.var.blue.length;
+
+	return 0;
+}
+
+static int
 stifb_setcolreg(u_int regno, u_int red, u_int green,
 	      u_int blue, u_int transp, struct fb_info *info)
 {
@@ -1103,6 +1125,7 @@ stifb_init_display(struct stifb_info *fb
 
 static struct fb_ops stifb_ops = {
 	.owner		= THIS_MODULE,
+	.fb_check_var	= stifb_check_var,
 	.fb_setcolreg	= stifb_setcolreg,
 	.fb_blank	= stifb_blank,
 	.fb_fillrect	= cfb_fillrect,
@@ -1122,6 +1145,7 @@ static int __init stifb_init_fb(struct s
 	struct stifb_info *fb;
 	struct fb_info *info;
 	unsigned long sti_rom_address;
+	char modestr[32];
 	char *dev_name;
 	int bpp, xres, yres;
 
@@ -1300,6 +1324,9 @@ static int __init stifb_init_fb(struct s
 	info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_COPYAREA;
 	info->pseudo_palette = &fb->pseudo_palette;
 
+	scnprintf(modestr, sizeof(modestr), "%dx%d-%d", xres, yres, bpp);
+	fb_find_mode(&info->var, info, modestr, NULL, 0, NULL, bpp);
+
 	/* This has to be done !!! */
 	if (fb_alloc_cmap(&info->cmap, NR_PALETTE, 0))
 		goto out_err1;

[PATCH 4.19 32/36] x86/mm: Fix use of uninitialized buffer in sme_enable()

[Greg Kroah-Hartman]

From: Nikita Zhandarovich <n.zhandarovich@fintech.ru>

commit cbebd68f59f03633469f3ecf9bea99cd6cce3854 upstream.

cmdline_find_option() may fail before doing any initialization of
the buffer array. This may lead to unpredictable results when the same
buffer is used later in calls to strncmp() function.  Fix the issue by
returning early if cmdline_find_option() returns an error.

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

Fixes: aca20d546214 ("x86/mm: Add support to make use of Secure Memory Encryption")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20230306160656.14844-1-n.zhandarovich@fintech.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/mm/mem_encrypt_identity.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/x86/mm/mem_encrypt_identity.c
+++ b/arch/x86/mm/mem_encrypt_identity.c
@@ -563,7 +563,8 @@ void __init sme_enable(struct boot_param
 	cmdline_ptr = (const char *)((u64)bp->hdr.cmd_line_ptr |
 				     ((u64)bp->ext_cmd_line_ptr << 32));
 
-	cmdline_find_option(cmdline_ptr, cmdline_arg, buffer, sizeof(buffer));
+	if (cmdline_find_option(cmdline_ptr, cmdline_arg, buffer, sizeof(buffer)) < 0)
+		return;
 
 	if (!strncmp(buffer, cmdline_on, sizeof(buffer)))
 		sme_me_mask = me_mask;

[PATCH 4.19 33/36] drm/i915: Dont use stolen memory for ring buffers with LLC

[Greg Kroah-Hartman]

From: John Harrison <John.C.Harrison@Intel.com>

commit 690e0ec8e63da9a29b39fedc6ed5da09c7c82651 upstream.

Direction from hardware is that stolen memory should never be used for
ring buffer allocations on platforms with LLC. There are too many
caching pitfalls due to the way stolen memory accesses are routed. So
it is safest to just not use it.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Fixes: c58b735fc762 ("drm/i915: Allocate rings from stolen")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.9+
Tested-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216011101.1909009-2-John.C.Harrison@Intel.com
(cherry picked from commit f54c1f6c697c4297f7ed94283c184acc338a5cf8)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/i915/intel_ringbuffer.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -1132,10 +1132,11 @@ static struct i915_vma *
 intel_ring_create_vma(struct drm_i915_private *dev_priv, int size)
 {
 	struct i915_address_space *vm = &dev_priv->ggtt.vm;
-	struct drm_i915_gem_object *obj;
+	struct drm_i915_gem_object *obj = NULL;
 	struct i915_vma *vma;
 
-	obj = i915_gem_object_create_stolen(dev_priv, size);
+	if (!HAS_LLC(dev_priv))
+		obj = i915_gem_object_create_stolen(dev_priv, size);
 	if (!obj)
 		obj = i915_gem_object_create_internal(dev_priv, size);
 	if (IS_ERR(obj))

[PATCH 4.19 34/36] serial: 8250_em: Fix UART port type

[Greg Kroah-Hartman]

From: Biju Das <biju.das.jz@bp.renesas.com>

commit 32e293be736b853f168cd065d9cbc1b0c69f545d upstream.

As per HW manual for  EMEV2 "R19UH0040EJ0400 Rev.4.00", the UART
IP found on EMMA mobile SoC is Register-compatible with the
general-purpose 16750 UART chip. Fix UART port type as 16750 and
enable 64-bytes fifo support.

Fixes: 22886ee96895 ("serial8250-em: Emma Mobile UART driver V2")
Cc: stable@vger.kernel.org
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230227114152.22265-2-biju.das.jz@bp.renesas.com
[biju: manually fixed the conflicts]
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_em.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/tty/serial/8250/8250_em.c
+++ b/drivers/tty/serial/8250/8250_em.c
@@ -102,8 +102,8 @@ static int serial8250_em_probe(struct pl
 	memset(&up, 0, sizeof(up));
 	up.port.mapbase = regs->start;
 	up.port.irq = irq->start;
-	up.port.type = PORT_UNKNOWN;
-	up.port.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_IOREMAP;
+	up.port.type = PORT_16750;
+	up.port.flags = UPF_FIXED_PORT | UPF_IOREMAP | UPF_FIXED_TYPE;
 	up.port.dev = &pdev->dev;
 	up.port.private_data = priv;
 

[PATCH 4.19 35/36] HID: core: Provide new max_buffer_size attribute to over-ride the default

[Greg Kroah-Hartman]

From: Lee Jones <lee@kernel.org>

commit b1a37ed00d7908a991c1d0f18a8cba3c2aa99bdc upstream.

Presently, when a report is processed, its proposed size, provided by
the user of the API (as Report Size * Report Count) is compared against
the subsystem default HID_MAX_BUFFER_SIZE (16k).  However, some
low-level HID drivers allocate a reduced amount of memory to their
buffers (e.g. UHID only allocates UHID_DATA_MAX (4k) buffers), rending
this check inadequate in some cases.

In these circumstances, if the received report ends up being smaller
than the proposed report size, the remainder of the buffer is zeroed.
That is, the space between sizeof(csize) (size of the current report)
and the rsize (size proposed i.e. Report Size * Report Count), which can
be handled up to HID_MAX_BUFFER_SIZE (16k).  Meaning that memset()
shoots straight past the end of the buffer boundary and starts zeroing
out in-use values, often resulting in calamity.

This patch introduces a new variable into 'struct hid_ll_driver' where
individual low-level drivers can over-ride the default maximum value of
HID_MAX_BUFFER_SIZE (16k) with something more sympathetic to the
interface.

Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
[Lee: Backported to v4.19.y]
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/hid-core.c |   18 +++++++++++++-----
 include/linux/hid.h    |    3 +++
 2 files changed, 16 insertions(+), 5 deletions(-)

--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -258,6 +258,7 @@ static int hid_add_field(struct hid_pars
 {
 	struct hid_report *report;
 	struct hid_field *field;
+	unsigned int max_buffer_size = HID_MAX_BUFFER_SIZE;
 	unsigned int usages;
 	unsigned int offset;
 	unsigned int i;
@@ -288,8 +289,11 @@ static int hid_add_field(struct hid_pars
 	offset = report->size;
 	report->size += parser->global.report_size * parser->global.report_count;
 
+	if (parser->device->ll_driver->max_buffer_size)
+		max_buffer_size = parser->device->ll_driver->max_buffer_size;
+
 	/* Total size check: Allow for possible report index byte */
-	if (report->size > (HID_MAX_BUFFER_SIZE - 1) << 3) {
+	if (report->size > (max_buffer_size - 1) << 3) {
 		hid_err(parser->device, "report is too long\n");
 		return -1;
 	}
@@ -1567,6 +1571,7 @@ int hid_report_raw_event(struct hid_devi
 	struct hid_report_enum *report_enum = hid->report_enum + type;
 	struct hid_report *report;
 	struct hid_driver *hdrv;
+	int max_buffer_size = HID_MAX_BUFFER_SIZE;
 	unsigned int a;
 	u32 rsize, csize = size;
 	u8 *cdata = data;
@@ -1583,10 +1588,13 @@ int hid_report_raw_event(struct hid_devi
 
 	rsize = hid_compute_report_size(report);
 
-	if (report_enum->numbered && rsize >= HID_MAX_BUFFER_SIZE)
-		rsize = HID_MAX_BUFFER_SIZE - 1;
-	else if (rsize > HID_MAX_BUFFER_SIZE)
-		rsize = HID_MAX_BUFFER_SIZE;
+	if (hid->ll_driver->max_buffer_size)
+		max_buffer_size = hid->ll_driver->max_buffer_size;
+
+	if (report_enum->numbered && rsize >= max_buffer_size)
+		rsize = max_buffer_size - 1;
+	else if (rsize > max_buffer_size)
+		rsize = max_buffer_size;
 
 	if (csize < rsize) {
 		dbg_hid("report %d is too short, (%d < %d)\n", report->id,
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -799,6 +799,7 @@ struct hid_driver {
  * @raw_request: send raw report request to device (e.g. feature report)
  * @output_report: send output report to device
  * @idle: send idle request to device
+ * @max_buffer_size: over-ride maximum data buffer size (default: HID_MAX_BUFFER_SIZE)
  */
 struct hid_ll_driver {
 	int (*start)(struct hid_device *hdev);
@@ -823,6 +824,8 @@ struct hid_ll_driver {
 	int (*output_report) (struct hid_device *hdev, __u8 *buf, size_t len);
 
 	int (*idle)(struct hid_device *hdev, int report, int idle, int reqtype);
+
+	unsigned int max_buffer_size;
 };
 
 extern struct hid_ll_driver i2c_hid_ll_driver;

[PATCH 4.19 36/36] HID: uhid: Over-ride the default maximum data buffer value with our own

[Greg Kroah-Hartman]

From: Lee Jones <lee@kernel.org>

commit 1c5d4221240a233df2440fe75c881465cdf8da07 upstream.

The default maximum data buffer size for this interface is UHID_DATA_MAX
(4k).  When data buffers are being processed, ensure this value is used
when ensuring the sanity, rather than a value between the user provided
value and HID_MAX_BUFFER_SIZE (16k).

Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/uhid.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/hid/uhid.c
+++ b/drivers/hid/uhid.c
@@ -398,6 +398,7 @@ struct hid_ll_driver uhid_hid_driver = {
 	.parse = uhid_hid_parse,
 	.raw_request = uhid_hid_raw_request,
 	.output_report = uhid_hid_output_report,
+	.max_buffer_size = UHID_DATA_MAX,
 };
 EXPORT_SYMBOL_GPL(uhid_hid_driver);
 

RE: [PATCH 4.19 00/36] 4.19.279-rc1 review

[Chris Paterson]

Hello Greg,

> From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Sent: 20 March 2023 14:54
> 
> This is the start of the stable review cycle for the 4.19.279 release.
> There are 36 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 22 Mar 2023 14:54:13 +0000.
> Anything received after that time might be too late.

CIP configurations built and booted with Linux 4.19.279-rc1 (c1beffa09ae6):
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/pipelines/812172003/
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/commits/linux-4.19.y

Tested-by: Chris Paterson (CIP) <chris.paterson2@renesas.com>

Kind regards, Chris

Re: [PATCH 4.19 00/36] 4.19.279-rc1 review

[Shuah Khan]

On 3/20/23 08:54, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.279 release.
> There are 36 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 22 Mar 2023 14:54:13 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.279-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 4.19 00/36] 4.19.279-rc1 review

[Naresh Kamboju]

On Mon, 20 Mar 2023 at 20:26, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.19.279 release.
> There are 36 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 22 Mar 2023 14:54:13 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.279-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 4.19.279-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-4.19.y
* git commit: c1beffa09ae6c6e2099ae4ffe4f30d5c2ee69f09
* git describe: v4.19.278-37-gc1beffa09ae6
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.19.y/build/v4.19.278-37-gc1beffa09ae6

## Test Regressions (compared to v4.19.278)

## Metric Regressions (compared to v4.19.278)

## Test Fixes (compared to v4.19.278)

## Metric Fixes (compared to v4.19.278)

## Test result summary
total: 91992, pass: 69255, fail: 3591, skip: 19028, xfail: 118

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 201 total, 200 passed, 1 failed
* arm64: 42 total, 41 passed, 1 failed
* i386: 29 total, 28 passed, 1 failed
* mips: 42 total, 42 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 51 total, 51 passed, 0 failed
* s390: 15 total, 15 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x86_64: 37 total, 36 passed, 1 failed

## Test suites summary
* boot
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers-dma-buf
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-firmware
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-net-forwarding
* kselftest-net-mptcp
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-open-posix-tests
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* rcutorture
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.19 00/36] 4.19.279-rc1 review

[Jon Hunter]

On 20/03/2023 14:54, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.279 release.
> There are 36 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 22 Mar 2023 14:54:13 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.279-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra.

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Due to infrastructure issues, no test report available, but all tests 
are passing.

Jon

-- 
nvpublic

Re: [PATCH 4.19 00/36] 4.19.279-rc1 review

[Guenter Roeck]

On Mon, Mar 20, 2023 at 03:54:26PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.279 release.
> There are 36 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 22 Mar 2023 14:54:13 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 155 pass: 155 fail: 0
Qemu test results:
	total: 431 pass: 431 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter