[PATCH 4.14 00/37] 4.14.313-rc1 review

[PATCH 4.14 00/37] 4.14.313-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.14.313 release.
There are 37 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu, 20 Apr 2023 12:02:44 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.313-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.14.313-rc1

Marc Zyngier <marc.zyngier@arm.com>
    arm64: KVM: Fix system register enumeration

Dave Martin <Dave.Martin@arm.com>
    KVM: arm64: Filter out invalid core register IDs in KVM_GET_REG_LIST

Dave Martin <Dave.Martin@arm.com>
    KVM: arm64: Factor out core register ID enumeration

Steve Clevenger <scclevenger@os.amperecomputing.com>
    coresight-etm4: Fix for() loop drvdata->nr_addr_cmp range bug

George Cherian <george.cherian@marvell.com>
    watchdog: sbsa_wdog: Make sure the timeout programming is within the limits

Waiman Long <longman@redhat.com>
    cgroup/cpuset: Wake up cpuset_attach_wq tasks in cpuset_cancel_attach()

Zhihao Cheng <chengzhihao1@huawei.com>
    ubi: Fix failure attaching when vid_hdr offset equals to (sub)page size

Robbie Harwood <rharwood@redhat.com>
    verify_pefile: relax wrapper length check

Hans de Goede <hdegoede@redhat.com>
    efi: sysfb_efi: Add quirk for Lenovo Yoga Book X91F/L

Alexander Stein <alexander.stein@ew.tq-group.com>
    i2c: imx-lpi2c: clean rx/tx buffers upon new message

Roman Gushchin <roman.gushchin@linux.dev>
    net: macb: fix a memory corruption in extended buffer descriptor mode

Denis Plotnikov <den-plotnikov@yandex-team.ru>
    qlcnic: check pci_reset_function result

Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
    niu: Fix missing unwind goto in niu_alloc_channels()

Zheng Wang <zyytlz.wz@163.com>
    9p/xen : Fix use after free bug in xen_9pfs_front_remove due to race condition

Bang Li <libang.linuxer@gmail.com>
    mtdblock: tolerate corrected bit-flips

Min Li <lm0963hack@gmail.com>
    Bluetooth: Fix race condition in hidp_session_thread

Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
    Bluetooth: L2CAP: Fix use-after-free in l2cap_disconnect_{req,rsp}

Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
    ALSA: hda/sigmatel: fix S/PDIF out on Intel D*45* motherboards

Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
    ALSA: i2c/cs8427: fix iec958 mixer control deactivation

Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
    ALSA: hda/sigmatel: add pin overrides for Intel DP45SG motherboard

Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
    ALSA: emu10k1: fix capture interrupt handler unlinking

Rongwei Wang <rongwei.wang@linux.alibaba.com>
    mm/swap: fix swap_info_struct race between swapoff and get_swap_pages()

Zheng Yejian <zhengyejian1@huawei.com>
    ring-buffer: Fix race while reader and writer are on the same page

John Keeping <john@metanate.com>
    ftrace: Mark get_lock_parent_ip() __always_inline

Kan Liang <kan.liang@linux.intel.com>
    perf/core: Fix the same task check in perf_event_set_output

Ryusuke Konishi <konishi.ryusuke@gmail.com>
    nilfs2: fix sysfs interface lifetime

Ryusuke Konishi <konishi.ryusuke@gmail.com>
    nilfs2: fix potential UAF of struct nilfs_sc_info in nilfs_segctor_thread()

Biju Das <biju.das.jz@bp.renesas.com>
    tty: serial: sh-sci: Fix Rx on RZ/G2L SCI

William Breathitt Gray <william.gray@linaro.org>
    iio: dac: cio-dac: Fix max DAC write value check for 12-bit

Bjørn Mork <bjorn@mork.no>
    USB: serial: option: add Quectel RM500U-CN modem

Enrico Sau <enrico.sau@gmail.com>
    USB: serial: option: add Telit FE990 compositions

Kees Jan Koster <kjkoster@kjkoster.org>
    USB: serial: cp210x: add Silicon Labs IFS-USB-DATACABLE IDs

Dhruva Gole <d-gole@ti.com>
    gpio: davinci: Add irq chip flag to skip set wake

Ziyang Xuan <william.xuanziyang@huawei.com>
    ipv6: Fix an uninit variable access bug in __ip6_make_skb()

Eric Dumazet <edumazet@google.com>
    icmp: guard against too small mtu

Felix Fietkau <nbd@nbd.name>
    wifi: mac80211: fix invalid drv_sta_pre_rcu_remove calls for non-uploaded sta

Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    pwm: cros-ec: Explicitly set .polarity in .get_state()


-------------

Diffstat:

 Documentation/sound/hd-audio/models.rst         |  2 +-
 Makefile                                        |  4 +-
 arch/arm64/kvm/guest.c                          | 83 ++++++++++++++++++++-----
 arch/x86/kernel/sysfb_efi.c                     |  8 +++
 crypto/asymmetric_keys/verify_pefile.c          | 12 ++--
 drivers/gpio/gpio-davinci.c                     |  2 +-
 drivers/hwtracing/coresight/coresight-etm4x.c   |  2 +-
 drivers/i2c/busses/i2c-imx-lpi2c.c              |  2 +
 drivers/iio/dac/cio-dac.c                       |  4 +-
 drivers/mtd/mtdblock.c                          | 12 ++--
 drivers/mtd/ubi/build.c                         | 21 +++++--
 drivers/net/ethernet/cadence/macb_main.c        |  4 ++
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c |  8 ++-
 drivers/net/ethernet/sun/niu.c                  |  2 +-
 drivers/pwm/pwm-cros-ec.c                       |  1 +
 drivers/tty/serial/sh-sci.c                     |  2 +-
 drivers/usb/serial/cp210x.c                     |  1 +
 drivers/usb/serial/option.c                     | 10 +++
 drivers/watchdog/sbsa_gwdt.c                    |  1 +
 fs/nilfs2/segment.c                             |  3 +-
 fs/nilfs2/super.c                               |  2 +
 fs/nilfs2/the_nilfs.c                           | 12 ++--
 include/linux/ftrace.h                          |  2 +-
 kernel/cgroup/cpuset.c                          |  4 +-
 kernel/events/core.c                            |  2 +-
 kernel/trace/ring_buffer.c                      | 13 +++-
 mm/swapfile.c                                   |  3 +-
 net/9p/trans_xen.c                              |  4 ++
 net/bluetooth/hidp/core.c                       |  2 +-
 net/bluetooth/l2cap_core.c                      | 24 ++-----
 net/ipv4/icmp.c                                 |  5 ++
 net/ipv6/ip6_output.c                           |  7 ++-
 net/mac80211/sta_info.c                         |  3 +-
 sound/i2c/cs8427.c                              |  7 ++-
 sound/pci/emu10k1/emupcm.c                      |  4 +-
 sound/pci/hda/patch_sigmatel.c                  | 10 +++
 36 files changed, 211 insertions(+), 77 deletions(-)

[PATCH 4.14 01/37] pwm: cros-ec: Explicitly set .polarity in .get_state()

[Greg Kroah-Hartman]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit 30006b77c7e130e01d1ab2148cc8abf73dfcc4bf ]

The driver only supports normal polarity. Complete the implementation of
.get_state() by setting .polarity accordingly.

Reviewed-by: Guenter Roeck <groeck@chromium.org>
Fixes: 1f0d3bb02785 ("pwm: Add ChromeOS EC PWM driver")
Link: https://lore.kernel.org/r/20230228135508.1798428-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pwm/pwm-cros-ec.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pwm/pwm-cros-ec.c b/drivers/pwm/pwm-cros-ec.c
index 9c13694eaa248..8450a06e88215 100644
--- a/drivers/pwm/pwm-cros-ec.c
+++ b/drivers/pwm/pwm-cros-ec.c
@@ -128,6 +128,7 @@ static void cros_ec_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
 
 	state->enabled = (ret > 0);
 	state->period = EC_PWM_MAX_DUTY;
+	state->polarity = PWM_POLARITY_NORMAL;
 
 	/* Note that "disabled" and "duty cycle == 0" are treated the same */
 	state->duty_cycle = ret;
-- 
2.39.2

[PATCH 4.14 02/37] wifi: mac80211: fix invalid drv_sta_pre_rcu_remove calls for non-uploaded sta

[Greg Kroah-Hartman]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit 12b220a6171faf10638ab683a975cadcf1a352d6 ]

Avoid potential data corruption issues caused by uninitialized driver
private data structures.

Reported-by: Brian Coverstone <brian@mainsequence.net>
Fixes: 6a9d1b91f34d ("mac80211: add pre-RCU-sync sta removal driver operation")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230324120924.38412-3-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/sta_info.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index 0d5265adf5396..4e406cd115738 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -942,7 +942,8 @@ static int __must_check __sta_info_destroy_part1(struct sta_info *sta)
 	list_del_rcu(&sta->list);
 	sta->removed = true;
 
-	drv_sta_pre_rcu_remove(local, sta->sdata, sta);
+	if (sta->uploaded)
+		drv_sta_pre_rcu_remove(local, sta->sdata, sta);
 
 	if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN &&
 	    rcu_access_pointer(sdata->u.vlan.sta) == sta)
-- 
2.39.2

[PATCH 4.14 03/37] icmp: guard against too small mtu

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 7d63b67125382ff0ffdfca434acbc94a38bd092b ]

syzbot was able to trigger a panic [1] in icmp_glue_bits(), or
more exactly in skb_copy_and_csum_bits()

There is no repro yet, but I think the issue is that syzbot
manages to lower device mtu to a small value, fooling __icmp_send()

__icmp_send() must make sure there is enough room for the
packet to include at least the headers.

We might in the future refactor skb_copy_and_csum_bits() and its
callers to no longer crash when something bad happens.

[1]
kernel BUG at net/core/skbuff.c:3343 !
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 15766 Comm: syz-executor.0 Not tainted 6.3.0-rc4-syzkaller-00039-gffe78bbd5121 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
RIP: 0010:skb_copy_and_csum_bits+0x798/0x860 net/core/skbuff.c:3343
Code: f0 c1 c8 08 41 89 c6 e9 73 ff ff ff e8 61 48 d4 f9 e9 41 fd ff ff 48 8b 7c 24 48 e8 52 48 d4 f9 e9 c3 fc ff ff e8 c8 27 84 f9 <0f> 0b 48 89 44 24 28 e8 3c 48 d4 f9 48 8b 44 24 28 e9 9d fb ff ff
RSP: 0018:ffffc90000007620 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000000001e8 RCX: 0000000000000100
RDX: ffff8880276f6280 RSI: ffffffff87fdd138 RDI: 0000000000000005
RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000
R10: 00000000000001e8 R11: 0000000000000001 R12: 000000000000003c
R13: 0000000000000000 R14: ffff888028244868 R15: 0000000000000b0e
FS: 00007fbc81f1c700(0000) GS:ffff88802ca00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2df43000 CR3: 00000000744db000 CR4: 0000000000150ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
icmp_glue_bits+0x7b/0x210 net/ipv4/icmp.c:353
__ip_append_data+0x1d1b/0x39f0 net/ipv4/ip_output.c:1161
ip_append_data net/ipv4/ip_output.c:1343 [inline]
ip_append_data+0x115/0x1a0 net/ipv4/ip_output.c:1322
icmp_push_reply+0xa8/0x440 net/ipv4/icmp.c:370
__icmp_send+0xb80/0x1430 net/ipv4/icmp.c:765
ipv4_send_dest_unreach net/ipv4/route.c:1239 [inline]
ipv4_link_failure+0x5a9/0x9e0 net/ipv4/route.c:1246
dst_link_failure include/net/dst.h:423 [inline]
arp_error_report+0xcb/0x1c0 net/ipv4/arp.c:296
neigh_invalidate+0x20d/0x560 net/core/neighbour.c:1079
neigh_timer_handler+0xc77/0xff0 net/core/neighbour.c:1166
call_timer_fn+0x1a0/0x580 kernel/time/timer.c:1700
expire_timers+0x29b/0x4b0 kernel/time/timer.c:1751
__run_timers kernel/time/timer.c:2022 [inline]

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+d373d60fddbdc915e666@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230330174502.1915328-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/icmp.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index 1748dfb1dc0a3..005bc38bcdde2 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -758,6 +758,11 @@ void __icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info,
 		room = 576;
 	room -= sizeof(struct iphdr) + icmp_param.replyopts.opt.opt.optlen;
 	room -= sizeof(struct icmphdr);
+	/* Guard against tiny mtu. We need to include at least one
+	 * IP network header for this message to make any sense.
+	 */
+	if (room <= (int)sizeof(struct iphdr))
+		goto ende;
 
 	icmp_param.data_len = skb_in->len - icmp_param.offset;
 	if (icmp_param.data_len > room)
-- 
2.39.2

[PATCH 4.14 04/37] ipv6: Fix an uninit variable access bug in __ip6_make_skb()

[Greg Kroah-Hartman]

From: Ziyang Xuan <william.xuanziyang@huawei.com>

[ Upstream commit ea30388baebcce37fd594d425a65037ca35e59e8 ]

Syzbot reported a bug as following:

=====================================================
BUG: KMSAN: uninit-value in arch_atomic64_inc arch/x86/include/asm/atomic64_64.h:88 [inline]
BUG: KMSAN: uninit-value in arch_atomic_long_inc include/linux/atomic/atomic-long.h:161 [inline]
BUG: KMSAN: uninit-value in atomic_long_inc include/linux/atomic/atomic-instrumented.h:1429 [inline]
BUG: KMSAN: uninit-value in __ip6_make_skb+0x2f37/0x30f0 net/ipv6/ip6_output.c:1956
 arch_atomic64_inc arch/x86/include/asm/atomic64_64.h:88 [inline]
 arch_atomic_long_inc include/linux/atomic/atomic-long.h:161 [inline]
 atomic_long_inc include/linux/atomic/atomic-instrumented.h:1429 [inline]
 __ip6_make_skb+0x2f37/0x30f0 net/ipv6/ip6_output.c:1956
 ip6_finish_skb include/net/ipv6.h:1122 [inline]
 ip6_push_pending_frames+0x10e/0x550 net/ipv6/ip6_output.c:1987
 rawv6_push_pending_frames+0xb12/0xb90 net/ipv6/raw.c:579
 rawv6_sendmsg+0x297e/0x2e60 net/ipv6/raw.c:922
 inet_sendmsg+0x101/0x180 net/ipv4/af_inet.c:827
 sock_sendmsg_nosec net/socket.c:714 [inline]
 sock_sendmsg net/socket.c:734 [inline]
 ____sys_sendmsg+0xa8e/0xe70 net/socket.c:2476
 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2530
 __sys_sendmsg net/socket.c:2559 [inline]
 __do_sys_sendmsg net/socket.c:2568 [inline]
 __se_sys_sendmsg net/socket.c:2566 [inline]
 __x64_sys_sendmsg+0x367/0x540 net/socket.c:2566
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Uninit was created at:
 slab_post_alloc_hook mm/slab.h:766 [inline]
 slab_alloc_node mm/slub.c:3452 [inline]
 __kmem_cache_alloc_node+0x71f/0xce0 mm/slub.c:3491
 __do_kmalloc_node mm/slab_common.c:967 [inline]
 __kmalloc_node_track_caller+0x114/0x3b0 mm/slab_common.c:988
 kmalloc_reserve net/core/skbuff.c:492 [inline]
 __alloc_skb+0x3af/0x8f0 net/core/skbuff.c:565
 alloc_skb include/linux/skbuff.h:1270 [inline]
 __ip6_append_data+0x51c1/0x6bb0 net/ipv6/ip6_output.c:1684
 ip6_append_data+0x411/0x580 net/ipv6/ip6_output.c:1854
 rawv6_sendmsg+0x2882/0x2e60 net/ipv6/raw.c:915
 inet_sendmsg+0x101/0x180 net/ipv4/af_inet.c:827
 sock_sendmsg_nosec net/socket.c:714 [inline]
 sock_sendmsg net/socket.c:734 [inline]
 ____sys_sendmsg+0xa8e/0xe70 net/socket.c:2476
 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2530
 __sys_sendmsg net/socket.c:2559 [inline]
 __do_sys_sendmsg net/socket.c:2568 [inline]
 __se_sys_sendmsg net/socket.c:2566 [inline]
 __x64_sys_sendmsg+0x367/0x540 net/socket.c:2566
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

It is because icmp6hdr does not in skb linear region under the scenario
of SOCK_RAW socket. Access icmp6_hdr(skb)->icmp6_type directly will
trigger the uninit variable access bug.

Use a local variable icmp6_type to carry the correct value in different
scenarios.

Fixes: 14878f75abd5 ("[IPV6]: Add ICMPMsgStats MIB (RFC 4293) [rev 2]")
Reported-by: syzbot+8257f4dcef79de670baf@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=3d605ec1d0a7f2a269a1a6936ac7f2b85975ee9c
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/ip6_output.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 4f40331ceb5ae..36647d3211074 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1715,8 +1715,13 @@ struct sk_buff *__ip6_make_skb(struct sock *sk,
 	IP6_UPD_PO_STATS(net, rt->rt6i_idev, IPSTATS_MIB_OUT, skb->len);
 	if (proto == IPPROTO_ICMPV6) {
 		struct inet6_dev *idev = ip6_dst_idev(skb_dst(skb));
+		u8 icmp6_type;
 
-		ICMP6MSGOUT_INC_STATS(net, idev, icmp6_hdr(skb)->icmp6_type);
+		if (sk->sk_socket->type == SOCK_RAW && !inet_sk(sk)->hdrincl)
+			icmp6_type = fl6->fl6_icmp_type;
+		else
+			icmp6_type = icmp6_hdr(skb)->icmp6_type;
+		ICMP6MSGOUT_INC_STATS(net, idev, icmp6_type);
 		ICMP6_INC_STATS(net, idev, ICMP6_MIB_OUTMSGS);
 	}
 
-- 
2.39.2

[PATCH 4.14 05/37] gpio: davinci: Add irq chip flag to skip set wake

[Greg Kroah-Hartman]

From: Dhruva Gole <d-gole@ti.com>

[ Upstream commit 7b75c4703609a3ebaf67271813521bc0281e1ec1 ]

Add the IRQCHIP_SKIP_SET_WAKE flag since there are no special IRQ Wake
bits that can be set to enable wakeup IRQ.

Fixes: 3d9edf09d452 ("[ARM] 4457/2: davinci: GPIO support")
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-davinci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
index e4b3d7db68c95..958c06ab9ade4 100644
--- a/drivers/gpio/gpio-davinci.c
+++ b/drivers/gpio/gpio-davinci.c
@@ -301,7 +301,7 @@ static struct irq_chip gpio_irqchip = {
 	.irq_enable	= gpio_irq_enable,
 	.irq_disable	= gpio_irq_disable,
 	.irq_set_type	= gpio_irq_type,
-	.flags		= IRQCHIP_SET_TYPE_MASKED,
+	.flags		= IRQCHIP_SET_TYPE_MASKED | IRQCHIP_SKIP_SET_WAKE,
 };
 
 static void gpio_irq_handler(struct irq_desc *desc)
-- 
2.39.2

[PATCH 4.14 06/37] USB: serial: cp210x: add Silicon Labs IFS-USB-DATACABLE IDs

[Greg Kroah-Hartman]

From: Kees Jan Koster <kjkoster@kjkoster.org>

commit 71f8afa2b66e356f435b6141b4a9ccf953e18356 upstream.

The Silicon Labs IFS-USB-DATACABLE is used in conjunction with for example
the Quint UPSes. It is used to enable Modbus communication with the UPS to
query configuration, power and battery status.

Signed-off-by: Kees Jan Koster <kjkoster@kjkoster.org>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/cp210x.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -124,6 +124,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */
 	{ USB_DEVICE(0x10C4, 0x8281) }, /* Nanotec Plug & Drive */
 	{ USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */
+	{ USB_DEVICE(0x10C4, 0x82AA) }, /* Silicon Labs IFS-USB-DATACABLE used with Quint UPS */
 	{ USB_DEVICE(0x10C4, 0x82EF) }, /* CESINEL FALCO 6105 AC Power Supply */
 	{ USB_DEVICE(0x10C4, 0x82F1) }, /* CESINEL MEDCAL EFD Earth Fault Detector */
 	{ USB_DEVICE(0x10C4, 0x82F2) }, /* CESINEL MEDCAL ST Network Analyzer */

[PATCH 4.14 07/37] USB: serial: option: add Telit FE990 compositions

[Greg Kroah-Hartman]

From: Enrico Sau <enrico.sau@gmail.com>

commit 773e8e7d07b753474b2ccd605ff092faaa9e65b9 upstream.

Add the following Telit FE990 compositions:

0x1080: tty, adb, rmnet, tty, tty, tty, tty
0x1081: tty, adb, mbim, tty, tty, tty, tty
0x1082: rndis, tty, adb, tty, tty, tty, tty
0x1083: tty, adb, ecm, tty, tty, tty, tty

Signed-off-by: Enrico Sau <enrico.sau@gmail.com>
Link: https://lore.kernel.org/r/20230314090059.77876-1-enrico.sau@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1303,6 +1303,14 @@ static const struct usb_device_id option
 	  .driver_info = NCTRL(0) | RSVD(1) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1075, 0xff),	/* Telit FN990 (PCIe) */
 	  .driver_info = RSVD(0) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1080, 0xff),	/* Telit FE990 (rmnet) */
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1081, 0xff),	/* Telit FE990 (MBIM) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1082, 0xff),	/* Telit FE990 (RNDIS) */
+	  .driver_info = NCTRL(2) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1083, 0xff),	/* Telit FE990 (ECM) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),

[PATCH 4.14 08/37] USB: serial: option: add Quectel RM500U-CN modem

[Greg Kroah-Hartman]

From: Bjørn Mork <bjorn@mork.no>

commit 7708a3858e69db91a8b69487994f33b96d20192a upstream.

This modem supports several modes with a class network function
and a number of serial functions, all using ff/00/00

The device ID is the same in all modes.

RNDIS mode
----------
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=0900 Rev= 4.04
S:  Manufacturer=Quectel
S:  Product=RM500U-CN
S:  SerialNumber=0123456789ABCDEF
C:* #Ifs= 7 Cfg#= 1 Atr=c0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

ECM mode
--------
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=0900 Rev= 4.04
S:  Manufacturer=Quectel
S:  Product=RM500U-CN
S:  SerialNumber=0123456789ABCDEF
C:* #Ifs= 7 Cfg#= 1 Atr=c0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=82(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

NCM mode
--------
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  5 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=0900 Rev= 4.04
S:  Manufacturer=Quectel
S:  Product=RM500U-CN
S:  SerialNumber=0123456789ABCDEF
C:* #Ifs= 7 Cfg#= 1 Atr=c0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0d Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0d Prot=00 Driver=cdc_ncm
E:  Ad=82(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Reported-by: Andrew Green <askgreen@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1201,6 +1201,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0xff, 0x30) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, 0x0900, 0xff, 0, 0), /* RM500U-CN */
+	  .driver_info = ZLP },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200U, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) },

[PATCH 4.14 09/37] iio: dac: cio-dac: Fix max DAC write value check for 12-bit

[Greg Kroah-Hartman]

From: William Breathitt Gray <william.gray@linaro.org>

commit c3701185ee1973845db088d8b0fc443397ab0eb2 upstream.

The CIO-DAC series of devices only supports DAC values up to 12-bit
rather than 16-bit. Trying to write a 16-bit value results in only the
lower 12 bits affecting the DAC output which is not what the user
expects. Instead, adjust the DAC write value check to reject values
larger than 12-bit so that they fail explicitly as invalid for the user.

Fixes: 3b8df5fd526e ("iio: Add IIO support for the Measurement Computing CIO-DAC family")
Cc: stable@vger.kernel.org
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/20230311002248.8548-1-william.gray@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/dac/cio-dac.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/iio/dac/cio-dac.c
+++ b/drivers/iio/dac/cio-dac.c
@@ -74,8 +74,8 @@ static int cio_dac_write_raw(struct iio_
 	if (mask != IIO_CHAN_INFO_RAW)
 		return -EINVAL;
 
-	/* DAC can only accept up to a 16-bit value */
-	if ((unsigned int)val > 65535)
+	/* DAC can only accept up to a 12-bit value */
+	if ((unsigned int)val > 4095)
 		return -EINVAL;
 
 	priv->chan_out_states[chan->channel] = val;

[PATCH 4.14 10/37] tty: serial: sh-sci: Fix Rx on RZ/G2L SCI

[Greg Kroah-Hartman]

From: Biju Das <biju.das.jz@bp.renesas.com>

commit f92ed0cd9328aed918ebb0ebb64d259eccbcc6e7 upstream.

SCI IP on RZ/G2L alike SoCs do not need regshift compared to other SCI
IPs on the SH platform. Currently, it does regshift and configuring Rx
wrongly. Drop adding regshift for RZ/G2L alike SoCs.

Fixes: dfc80387aefb ("serial: sh-sci: Compute the regshift value for SCI ports")
Cc: stable@vger.kernel.org
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230321114753.75038-3-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/sh-sci.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -2839,7 +2839,7 @@ static int sci_init_single(struct platfo
 	port->flags		= UPF_FIXED_PORT | UPF_BOOT_AUTOCONF | p->flags;
 	port->fifosize		= sci_port->params->fifosize;
 
-	if (port->type == PORT_SCI) {
+	if (port->type == PORT_SCI && !dev->dev.of_node) {
 		if (sci_port->reg_size >= 0x20)
 			port->regshift = 2;
 		else

[PATCH 4.14 11/37] nilfs2: fix potential UAF of struct nilfs_sc_info in nilfs_segctor_thread()

[Greg Kroah-Hartman]

From: Ryusuke Konishi <konishi.ryusuke@gmail.com>

commit 6be49d100c22ffea3287a4b19d7639d259888e33 upstream.

The finalization of nilfs_segctor_thread() can race with
nilfs_segctor_kill_thread() which terminates that thread, potentially
causing a use-after-free BUG as KASAN detected.

At the end of nilfs_segctor_thread(), it assigns NULL to "sc_task" member
of "struct nilfs_sc_info" to indicate the thread has finished, and then
notifies nilfs_segctor_kill_thread() of this using waitqueue
"sc_wait_task" on the struct nilfs_sc_info.

However, here, immediately after the NULL assignment to "sc_task", it is
possible that nilfs_segctor_kill_thread() will detect it and return to
continue the deallocation, freeing the nilfs_sc_info structure before the
thread does the notification.

This fixes the issue by protecting the NULL assignment to "sc_task" and
its notification, with spinlock "sc_state_lock" of the struct
nilfs_sc_info.  Since nilfs_segctor_kill_thread() does a final check to
see if "sc_task" is NULL with "sc_state_lock" locked, this can eliminate
the race.

Link: https://lkml.kernel.org/r/20230327175318.8060-1-konishi.ryusuke@gmail.com
Reported-by: syzbot+b08ebcc22f8f3e6be43a@syzkaller.appspotmail.com
Link: https://lkml.kernel.org/r/00000000000000660d05f7dfa877@google.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nilfs2/segment.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -2623,11 +2623,10 @@ static int nilfs_segctor_thread(void *ar
 	goto loop;
 
  end_thread:
-	spin_unlock(&sci->sc_state_lock);
-
 	/* end sync. */
 	sci->sc_task = NULL;
 	wake_up(&sci->sc_wait_task); /* for nilfs_segctor_kill_thread() */
+	spin_unlock(&sci->sc_state_lock);
 	return 0;
 }
 

[PATCH 4.14 12/37] nilfs2: fix sysfs interface lifetime

[Greg Kroah-Hartman]

From: Ryusuke Konishi <konishi.ryusuke@gmail.com>

commit 42560f9c92cc43dce75dbf06cc0d840dced39b12 upstream.

The current nilfs2 sysfs support has issues with the timing of creation
and deletion of sysfs entries, potentially leading to null pointer
dereferences, use-after-free, and lockdep warnings.

Some of the sysfs attributes for nilfs2 per-filesystem instance refer to
metadata file "cpfile", "sufile", or "dat", but
nilfs_sysfs_create_device_group that creates those attributes is executed
before the inodes for these metadata files are loaded, and
nilfs_sysfs_delete_device_group which deletes these sysfs entries is
called after releasing their metadata file inodes.

Therefore, access to some of these sysfs attributes may occur outside of
the lifetime of these metadata files, resulting in inode NULL pointer
dereferences or use-after-free.

In addition, the call to nilfs_sysfs_create_device_group() is made during
the locking period of the semaphore "ns_sem" of nilfs object, so the
shrinker call caused by the memory allocation for the sysfs entries, may
derive lock dependencies "ns_sem" -> (shrinker) -> "locks acquired in
nilfs_evict_inode()".

Since nilfs2 may acquire "ns_sem" deep in the call stack holding other
locks via its error handler __nilfs_error(), this causes lockdep to report
circular locking.  This is a false positive and no circular locking
actually occurs as no inodes exist yet when
nilfs_sysfs_create_device_group() is called.  Fortunately, the lockdep
warnings can be resolved by simply moving the call to
nilfs_sysfs_create_device_group() out of "ns_sem".

This fixes these sysfs issues by revising where the device's sysfs
interface is created/deleted and keeping its lifetime within the lifetime
of the metadata files above.

Link: https://lkml.kernel.org/r/20230330205515.6167-1-konishi.ryusuke@gmail.com
Fixes: dd70edbde262 ("nilfs2: integrate sysfs support into driver")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+979fa7f9c0d086fdc282@syzkaller.appspotmail.com
  Link: https://lkml.kernel.org/r/0000000000003414b505f7885f7e@google.com
Reported-by: syzbot+5b7d542076d9bddc3c6a@syzkaller.appspotmail.com
  Link: https://lkml.kernel.org/r/0000000000006ac86605f5f44eb9@google.com
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nilfs2/super.c     |    2 ++
 fs/nilfs2/the_nilfs.c |   12 +++++++-----
 2 files changed, 9 insertions(+), 5 deletions(-)

--- a/fs/nilfs2/super.c
+++ b/fs/nilfs2/super.c
@@ -494,6 +494,7 @@ static void nilfs_put_super(struct super
 		up_write(&nilfs->ns_sem);
 	}
 
+	nilfs_sysfs_delete_device_group(nilfs);
 	iput(nilfs->ns_sufile);
 	iput(nilfs->ns_cpfile);
 	iput(nilfs->ns_dat);
@@ -1120,6 +1121,7 @@ nilfs_fill_super(struct super_block *sb,
 	nilfs_put_root(fsroot);
 
  failed_unload:
+	nilfs_sysfs_delete_device_group(nilfs);
 	iput(nilfs->ns_sufile);
 	iput(nilfs->ns_cpfile);
 	iput(nilfs->ns_dat);
--- a/fs/nilfs2/the_nilfs.c
+++ b/fs/nilfs2/the_nilfs.c
@@ -96,7 +96,6 @@ void destroy_nilfs(struct the_nilfs *nil
 {
 	might_sleep();
 	if (nilfs_init(nilfs)) {
-		nilfs_sysfs_delete_device_group(nilfs);
 		brelse(nilfs->ns_sbh[0]);
 		brelse(nilfs->ns_sbh[1]);
 	}
@@ -284,6 +283,10 @@ int load_nilfs(struct the_nilfs *nilfs,
 		goto failed;
 	}
 
+	err = nilfs_sysfs_create_device_group(sb);
+	if (unlikely(err))
+		goto sysfs_error;
+
 	if (valid_fs)
 		goto skip_recovery;
 
@@ -345,6 +348,9 @@ int load_nilfs(struct the_nilfs *nilfs,
 	goto failed;
 
  failed_unload:
+	nilfs_sysfs_delete_device_group(nilfs);
+
+ sysfs_error:
 	iput(nilfs->ns_cpfile);
 	iput(nilfs->ns_sufile);
 	iput(nilfs->ns_dat);
@@ -677,10 +683,6 @@ int init_nilfs(struct the_nilfs *nilfs,
 	if (err)
 		goto failed_sbh;
 
-	err = nilfs_sysfs_create_device_group(sb);
-	if (err)
-		goto failed_sbh;
-
 	set_nilfs_init(nilfs);
 	err = 0;
  out:

[PATCH 4.14 13/37] perf/core: Fix the same task check in perf_event_set_output

[Greg Kroah-Hartman]

From: Kan Liang <kan.liang@linux.intel.com>

[ Upstream commit 24d3ae2f37d8bc3c14b31d353c5d27baf582b6a6 ]

The same task check in perf_event_set_output has some potential issues
for some usages.

For the current perf code, there is a problem if using of
perf_event_open() to have multiple samples getting into the same mmap’d
memory when they are both attached to the same process.
https://lore.kernel.org/all/92645262-D319-4068-9C44-2409EF44888E@gmail.com/
Because the event->ctx is not ready when the perf_event_set_output() is
invoked in the perf_event_open().

Besides the above issue, before the commit bd2756811766 ("perf: Rewrite
core context handling"), perf record can errors out when sampling with
a hardware event and a software event as below.
 $ perf record -e cycles,dummy --per-thread ls
 failed to mmap with 22 (Invalid argument)
That's because that prior to the commit a hardware event and a software
event are from different task context.

The problem should be a long time issue since commit c3f00c70276d
("perk: Separate find_get_context() from event initialization").

The task struct is stored in the event->hw.target for each per-thread
event. It is a more reliable way to determine whether two events are
attached to the same task.

The event->hw.target was also introduced several years ago by the
commit 50f16a8bf9d7 ("perf: Remove type specific target pointers"). It
can not only be used to fix the issue with the current code, but also
back port to fix the issues with an older kernel.

Note: The event->hw.target was introduced later than commit
c3f00c70276d. The patch may cannot be applied between the commit
c3f00c70276d and commit 50f16a8bf9d7. Anybody that wants to back-port
this at that period may have to find other solutions.

Fixes: c3f00c70276d ("perf: Separate find_get_context() from event initialization")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lkml.kernel.org/r/20230322202449.512091-1-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/events/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/events/core.c b/kernel/events/core.c
index eb67ef4506151..392e48bbba448 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -9899,7 +9899,7 @@ perf_event_set_output(struct perf_event *event, struct perf_event *output_event)
 	/*
 	 * If its not a per-cpu rb, it must be the same task.
 	 */
-	if (output_event->cpu == -1 && output_event->ctx != event->ctx)
+	if (output_event->cpu == -1 && output_event->hw.target != event->hw.target)
 		goto out;
 
 	/*
-- 
2.39.2

[PATCH 4.14 14/37] ftrace: Mark get_lock_parent_ip() __always_inline

[Greg Kroah-Hartman]

From: John Keeping <john@metanate.com>

commit ea65b41807a26495ff2a73dd8b1bab2751940887 upstream.

If the compiler decides not to inline this function then preemption
tracing will always show an IP inside the preemption disabling path and
never the function actually calling preempt_{enable,disable}.

Link: https://lore.kernel.org/linux-trace-kernel/20230327173647.1690849-1-john@metanate.com

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Fixes: f904f58263e1d ("sched/debug: Fix preempt_disable_ip recording for preempt_disable()")
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/ftrace.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -723,7 +723,7 @@ static inline void __ftrace_enabled_rest
 #define CALLER_ADDR5 ((unsigned long)ftrace_return_address(5))
 #define CALLER_ADDR6 ((unsigned long)ftrace_return_address(6))
 
-static inline unsigned long get_lock_parent_ip(void)
+static __always_inline unsigned long get_lock_parent_ip(void)
 {
 	unsigned long addr = CALLER_ADDR0;
 

[PATCH 4.14 15/37] ring-buffer: Fix race while reader and writer are on the same page

[Greg Kroah-Hartman]

From: Zheng Yejian <zhengyejian1@huawei.com>

commit 6455b6163d8c680366663cdb8c679514d55fc30c upstream.

When user reads file 'trace_pipe', kernel keeps printing following logs
that warn at "cpu_buffer->reader_page->read > rb_page_size(reader)" in
rb_get_reader_page(). It just looks like there's an infinite loop in
tracing_read_pipe(). This problem occurs several times on arm64 platform
when testing v5.10 and below.

  Call trace:
   rb_get_reader_page+0x248/0x1300
   rb_buffer_peek+0x34/0x160
   ring_buffer_peek+0xbc/0x224
   peek_next_entry+0x98/0xbc
   __find_next_entry+0xc4/0x1c0
   trace_find_next_entry_inc+0x30/0x94
   tracing_read_pipe+0x198/0x304
   vfs_read+0xb4/0x1e0
   ksys_read+0x74/0x100
   __arm64_sys_read+0x24/0x30
   el0_svc_common.constprop.0+0x7c/0x1bc
   do_el0_svc+0x2c/0x94
   el0_svc+0x20/0x30
   el0_sync_handler+0xb0/0xb4
   el0_sync+0x160/0x180

Then I dump the vmcore and look into the problematic per_cpu ring_buffer,
I found that tail_page/commit_page/reader_page are on the same page while
reader_page->read is obviously abnormal:
  tail_page == commit_page == reader_page == {
    .write = 0x100d20,
    .read = 0x8f9f4805,  // Far greater than 0xd20, obviously abnormal!!!
    .entries = 0x10004c,
    .real_end = 0x0,
    .page = {
      .time_stamp = 0x857257416af0,
      .commit = 0xd20,  // This page hasn't been full filled.
      // .data[0...0xd20] seems normal.
    }
 }

The root cause is most likely the race that reader and writer are on the
same page while reader saw an event that not fully committed by writer.

To fix this, add memory barriers to make sure the reader can see the
content of what is committed. Since commit a0fcaaed0c46 ("ring-buffer: Fix
race between reset page and reading page") has added the read barrier in
rb_get_reader_page(), here we just need to add the write barrier.

Link: https://lore.kernel.org/linux-trace-kernel/20230325021247.2923907-1-zhengyejian1@huawei.com

Cc: stable@vger.kernel.org
Fixes: 77ae365eca89 ("ring-buffer: make lockless")
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/trace/ring_buffer.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -2397,6 +2397,10 @@ rb_set_commit_to_write(struct ring_buffe
 		if (RB_WARN_ON(cpu_buffer,
 			       rb_is_reader_page(cpu_buffer->tail_page)))
 			return;
+		/*
+		 * No need for a memory barrier here, as the update
+		 * of the tail_page did it for this page.
+		 */
 		local_set(&cpu_buffer->commit_page->page->commit,
 			  rb_page_write(cpu_buffer->commit_page));
 		rb_inc_page(cpu_buffer, &cpu_buffer->commit_page);
@@ -2410,6 +2414,8 @@ rb_set_commit_to_write(struct ring_buffe
 	while (rb_commit_index(cpu_buffer) !=
 	       rb_page_write(cpu_buffer->commit_page)) {
 
+		/* Make sure the readers see the content of what is committed. */
+		smp_wmb();
 		local_set(&cpu_buffer->commit_page->page->commit,
 			  rb_page_write(cpu_buffer->commit_page));
 		RB_WARN_ON(cpu_buffer,
@@ -3725,7 +3731,12 @@ rb_get_reader_page(struct ring_buffer_pe
 
 	/*
 	 * Make sure we see any padding after the write update
-	 * (see rb_reset_tail())
+	 * (see rb_reset_tail()).
+	 *
+	 * In addition, a writer may be writing on the reader page
+	 * if the page has not been fully filled, so the read barrier
+	 * is also needed to make sure we see the content of what is
+	 * committed by the writer (see rb_set_commit_to_write()).
 	 */
 	smp_rmb();
 

[PATCH 4.14 16/37] mm/swap: fix swap_info_struct race between swapoff and get_swap_pages()

[Greg Kroah-Hartman]

From: Rongwei Wang <rongwei.wang@linux.alibaba.com>

commit 6fe7d6b992113719e96744d974212df3fcddc76c upstream.

The si->lock must be held when deleting the si from the available list.
Otherwise, another thread can re-add the si to the available list, which
can lead to memory corruption.  The only place we have found where this
happens is in the swapoff path.  This case can be described as below:

core 0                       core 1
swapoff

del_from_avail_list(si)      waiting

try lock si->lock            acquire swap_avail_lock
                             and re-add si into
                             swap_avail_head

acquire si->lock but missing si already being added again, and continuing
to clear SWP_WRITEOK, etc.

It can be easily found that a massive warning messages can be triggered
inside get_swap_pages() by some special cases, for example, we call
madvise(MADV_PAGEOUT) on blocks of touched memory concurrently, meanwhile,
run much swapon-swapoff operations (e.g.  stress-ng-swap).

However, in the worst case, panic can be caused by the above scene.  In
swapoff(), the memory used by si could be kept in swap_info[] after
turning off a swap.  This means memory corruption will not be caused
immediately until allocated and reset for a new swap in the swapon path.
A panic message caused: (with CONFIG_PLIST_DEBUG enabled)

------------[ cut here ]------------
top: 00000000e58a3003, n: 0000000013e75cda, p: 000000008cd4451a
prev: 0000000035b1e58a, n: 000000008cd4451a, p: 000000002150ee8d
next: 000000008cd4451a, n: 000000008cd4451a, p: 000000008cd4451a
WARNING: CPU: 21 PID: 1843 at lib/plist.c:60 plist_check_prev_next_node+0x50/0x70
Modules linked in: rfkill(E) crct10dif_ce(E)...
CPU: 21 PID: 1843 Comm: stress-ng Kdump: ... 5.10.134+
Hardware name: Alibaba Cloud ECS, BIOS 0.0.0 02/06/2015
pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--)
pc : plist_check_prev_next_node+0x50/0x70
lr : plist_check_prev_next_node+0x50/0x70
sp : ffff0018009d3c30
x29: ffff0018009d3c40 x28: ffff800011b32a98
x27: 0000000000000000 x26: ffff001803908000
x25: ffff8000128ea088 x24: ffff800011b32a48
x23: 0000000000000028 x22: ffff001800875c00
x21: ffff800010f9e520 x20: ffff001800875c00
x19: ffff001800fdc6e0 x18: 0000000000000030
x17: 0000000000000000 x16: 0000000000000000
x15: 0736076307640766 x14: 0730073007380731
x13: 0736076307640766 x12: 0730073007380731
x11: 000000000004058d x10: 0000000085a85b76
x9 : ffff8000101436e4 x8 : ffff800011c8ce08
x7 : 0000000000000000 x6 : 0000000000000001
x5 : ffff0017df9ed338 x4 : 0000000000000001
x3 : ffff8017ce62a000 x2 : ffff0017df9ed340
x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
 plist_check_prev_next_node+0x50/0x70
 plist_check_head+0x80/0xf0
 plist_add+0x28/0x140
 add_to_avail_list+0x9c/0xf0
 _enable_swap_info+0x78/0xb4
 __do_sys_swapon+0x918/0xa10
 __arm64_sys_swapon+0x20/0x30
 el0_svc_common+0x8c/0x220
 do_el0_svc+0x2c/0x90
 el0_svc+0x1c/0x30
 el0_sync_handler+0xa8/0xb0
 el0_sync+0x148/0x180
irq event stamp: 2082270

Now, si->lock locked before calling 'del_from_avail_list()' to make sure
other thread see the si had been deleted and SWP_WRITEOK cleared together,
will not reinsert again.

This problem exists in versions after stable 5.10.y.

Link: https://lkml.kernel.org/r/20230404154716.23058-1-rongwei.wang@linux.alibaba.com
Fixes: a2468cc9bfdff ("swap: choose swap device according to numa node")
Tested-by: Yongchen Yin <wb-yyc939293@alibaba-inc.com>
Signed-off-by: Rongwei Wang <rongwei.wang@linux.alibaba.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/swapfile.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -596,6 +596,7 @@ static void __del_from_avail_list(struct
 {
 	int nid;
 
+	assert_spin_locked(&p->lock);
 	for_each_node(nid)
 		plist_del(&p->avail_lists[nid], &swap_avail_heads[nid]);
 }
@@ -2574,8 +2575,8 @@ SYSCALL_DEFINE1(swapoff, const char __us
 		spin_unlock(&swap_lock);
 		goto out_dput;
 	}
-	del_from_avail_list(p);
 	spin_lock(&p->lock);
+	del_from_avail_list(p);
 	if (p->prio < 0) {
 		struct swap_info_struct *si = p;
 		int nid;

[PATCH 4.14 17/37] ALSA: emu10k1: fix capture interrupt handler unlinking

[Greg Kroah-Hartman]

From: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>

commit b09c551c77c7e01dc6e4f3c8bf06b5ffa7b06db5 upstream.

Due to two copy/pastos, closing the MIC or EFX capture device would
make a running ADC capture hang due to unsetting its interrupt handler.
In principle, this would have also allowed dereferencing dangling
pointers, but we're actually rather thorough at disabling and flushing
the ints.

While it may sound like one, this actually wasn't a hypothetical bug:
PortAudio will open a capture stream at startup (and close it right
away) even if not asked to. If the first device is busy, it will just
proceed with the next one ... thus killing a concurrent capture.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197923-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/emu10k1/emupcm.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/sound/pci/emu10k1/emupcm.c
+++ b/sound/pci/emu10k1/emupcm.c
@@ -1251,7 +1251,7 @@ static int snd_emu10k1_capture_mic_close
 {
 	struct snd_emu10k1 *emu = snd_pcm_substream_chip(substream);
 
-	emu->capture_interrupt = NULL;
+	emu->capture_mic_interrupt = NULL;
 	emu->pcm_capture_mic_substream = NULL;
 	return 0;
 }
@@ -1359,7 +1359,7 @@ static int snd_emu10k1_capture_efx_close
 {
 	struct snd_emu10k1 *emu = snd_pcm_substream_chip(substream);
 
-	emu->capture_interrupt = NULL;
+	emu->capture_efx_interrupt = NULL;
 	emu->pcm_capture_efx_substream = NULL;
 	return 0;
 }

[PATCH 4.14 18/37] ALSA: hda/sigmatel: add pin overrides for Intel DP45SG motherboard

[Greg Kroah-Hartman]

From: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>

commit c17f8fd31700392b1bb9e7b66924333568cb3700 upstream.

Like the other boards from the D*45* series, this one sets up the
outputs not quite correctly.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197826-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/sound/hd-audio/models.rst |    2 +-
 sound/pci/hda/patch_sigmatel.c          |    2 ++
 2 files changed, 3 insertions(+), 1 deletion(-)

--- a/Documentation/sound/hd-audio/models.rst
+++ b/Documentation/sound/hd-audio/models.rst
@@ -429,7 +429,7 @@ ref
 no-jd
     BIOS setup but without jack-detection
 intel
-    Intel DG45* mobos
+    Intel D*45* mobos
 dell-m6-amic
     Dell desktops/laptops with analog mics
 dell-m6-dmic
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -1989,6 +1989,8 @@ static const struct snd_pci_quirk stac92
 				"DFI LanParty", STAC_92HD73XX_REF),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101,
 				"DFI LanParty", STAC_92HD73XX_REF),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x5001,
+				"Intel DP45SG", STAC_92HD73XX_INTEL),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x5002,
 				"Intel DG45ID", STAC_92HD73XX_INTEL),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x5003,

[PATCH 4.14 19/37] ALSA: i2c/cs8427: fix iec958 mixer control deactivation

[Greg Kroah-Hartman]

From: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>

commit e98e7a82bca2b6dce3e03719cff800ec913f9af7 upstream.

snd_cs8427_iec958_active() would always delete
SNDRV_CTL_ELEM_ACCESS_INACTIVE, even though the function has an
argument `active`.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201219.2197811-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/i2c/cs8427.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/sound/i2c/cs8427.c
+++ b/sound/i2c/cs8427.c
@@ -568,10 +568,13 @@ int snd_cs8427_iec958_active(struct snd_
 	if (snd_BUG_ON(!cs8427))
 		return -ENXIO;
 	chip = cs8427->private_data;
-	if (active)
+	if (active) {
 		memcpy(chip->playback.pcm_status,
 		       chip->playback.def_status, 24);
-	chip->playback.pcm_ctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_INACTIVE;
+		chip->playback.pcm_ctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_INACTIVE;
+	} else {
+		chip->playback.pcm_ctl->vd[0].access |= SNDRV_CTL_ELEM_ACCESS_INACTIVE;
+	}
 	snd_ctl_notify(cs8427->bus->card,
 		       SNDRV_CTL_EVENT_MASK_VALUE | SNDRV_CTL_EVENT_MASK_INFO,
 		       &chip->playback.pcm_ctl->id);

[PATCH 4.14 20/37] ALSA: hda/sigmatel: fix S/PDIF out on Intel D*45* motherboards

[Greg Kroah-Hartman]

From: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>

commit f342ac00da1064eb4f94b1f4bcacbdfea955797a upstream.

The BIOS botches this one completely - it says the 2nd S/PDIF output is
used, while in fact it's the 1st one. This is tested on DP45SG, but I'm
assuming it's valid for the other boards in the series as well.

Also add some comments regarding the pins.
FWIW, the codec is apparently still sold by Tempo Semiconductor, Inc.,
where one can download the documentation.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197826-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_sigmatel.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -1741,6 +1741,7 @@ static const struct snd_pci_quirk stac92
 };
 
 static const struct hda_pintbl ref92hd73xx_pin_configs[] = {
+	// Port A-H
 	{ 0x0a, 0x02214030 },
 	{ 0x0b, 0x02a19040 },
 	{ 0x0c, 0x01a19020 },
@@ -1749,9 +1750,12 @@ static const struct hda_pintbl ref92hd73
 	{ 0x0f, 0x01014010 },
 	{ 0x10, 0x01014020 },
 	{ 0x11, 0x01014030 },
+	// CD in
 	{ 0x12, 0x02319040 },
+	// Digial Mic ins
 	{ 0x13, 0x90a000f0 },
 	{ 0x14, 0x90a000f0 },
+	// Digital outs
 	{ 0x22, 0x01452050 },
 	{ 0x23, 0x01452050 },
 	{}
@@ -1792,6 +1796,7 @@ static const struct hda_pintbl alienware
 };
 
 static const struct hda_pintbl intel_dg45id_pin_configs[] = {
+	// Analog outputs
 	{ 0x0a, 0x02214230 },
 	{ 0x0b, 0x02A19240 },
 	{ 0x0c, 0x01013214 },
@@ -1799,6 +1804,9 @@ static const struct hda_pintbl intel_dg4
 	{ 0x0e, 0x01A19250 },
 	{ 0x0f, 0x01011212 },
 	{ 0x10, 0x01016211 },
+	// Digital output
+	{ 0x22, 0x01451380 },
+	{ 0x23, 0x40f000f0 },
 	{}
 };
 

[PATCH 4.14 21/37] Bluetooth: L2CAP: Fix use-after-free in l2cap_disconnect_{req,rsp}

[Greg Kroah-Hartman]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

commit a2a9339e1c9deb7e1e079e12e27a0265aea8421a upstream.

Similar to commit d0be8347c623 ("Bluetooth: L2CAP: Fix use-after-free
caused by l2cap_chan_put"), just use l2cap_chan_hold_unless_zero to
prevent referencing a channel that is about to be destroyed.

Cc: stable@kernel.org
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bluetooth/l2cap_core.c |   24 ++++++------------------
 1 file changed, 6 insertions(+), 18 deletions(-)

--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -4350,33 +4350,27 @@ static inline int l2cap_disconnect_req(s
 
 	BT_DBG("scid 0x%4.4x dcid 0x%4.4x", scid, dcid);
 
-	mutex_lock(&conn->chan_lock);
-
-	chan = __l2cap_get_chan_by_scid(conn, dcid);
+	chan = l2cap_get_chan_by_scid(conn, dcid);
 	if (!chan) {
-		mutex_unlock(&conn->chan_lock);
 		cmd_reject_invalid_cid(conn, cmd->ident, dcid, scid);
 		return 0;
 	}
 
-	l2cap_chan_hold(chan);
-	l2cap_chan_lock(chan);
-
 	rsp.dcid = cpu_to_le16(chan->scid);
 	rsp.scid = cpu_to_le16(chan->dcid);
 	l2cap_send_cmd(conn, cmd->ident, L2CAP_DISCONN_RSP, sizeof(rsp), &rsp);
 
 	chan->ops->set_shutdown(chan);
 
+	mutex_lock(&conn->chan_lock);
 	l2cap_chan_del(chan, ECONNRESET);
+	mutex_unlock(&conn->chan_lock);
 
 	chan->ops->close(chan);
 
 	l2cap_chan_unlock(chan);
 	l2cap_chan_put(chan);
 
-	mutex_unlock(&conn->chan_lock);
-
 	return 0;
 }
 
@@ -4396,33 +4390,27 @@ static inline int l2cap_disconnect_rsp(s
 
 	BT_DBG("dcid 0x%4.4x scid 0x%4.4x", dcid, scid);
 
-	mutex_lock(&conn->chan_lock);
-
-	chan = __l2cap_get_chan_by_scid(conn, scid);
+	chan = l2cap_get_chan_by_scid(conn, scid);
 	if (!chan) {
 		mutex_unlock(&conn->chan_lock);
 		return 0;
 	}
 
-	l2cap_chan_hold(chan);
-	l2cap_chan_lock(chan);
-
 	if (chan->state != BT_DISCONN) {
 		l2cap_chan_unlock(chan);
 		l2cap_chan_put(chan);
-		mutex_unlock(&conn->chan_lock);
 		return 0;
 	}
 
+	mutex_lock(&conn->chan_lock);
 	l2cap_chan_del(chan, 0);
+	mutex_unlock(&conn->chan_lock);
 
 	chan->ops->close(chan);
 
 	l2cap_chan_unlock(chan);
 	l2cap_chan_put(chan);
 
-	mutex_unlock(&conn->chan_lock);
-
 	return 0;
 }
 

[PATCH 4.14 22/37] Bluetooth: Fix race condition in hidp_session_thread

[Greg Kroah-Hartman]

From: Min Li <lm0963hack@gmail.com>

commit c95930abd687fcd1aa040dc4fe90dff947916460 upstream.

There is a potential race condition in hidp_session_thread that may
lead to use-after-free. For instance, the timer is active while
hidp_del_timer is called in hidp_session_thread(). After hidp_session_put,
then 'session' will be freed, causing kernel panic when hidp_idle_timeout
is running.

The solution is to use del_timer_sync instead of del_timer.

Here is the call trace:

? hidp_session_probe+0x780/0x780
call_timer_fn+0x2d/0x1e0
__run_timers.part.0+0x569/0x940
hidp_session_probe+0x780/0x780
call_timer_fn+0x1e0/0x1e0
ktime_get+0x5c/0xf0
lapic_next_deadline+0x2c/0x40
clockevents_program_event+0x205/0x320
run_timer_softirq+0xa9/0x1b0
__do_softirq+0x1b9/0x641
__irq_exit_rcu+0xdc/0x190
irq_exit_rcu+0xe/0x20
sysvec_apic_timer_interrupt+0xa1/0xc0

Cc: stable@vger.kernel.org
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bluetooth/hidp/core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/bluetooth/hidp/core.c
+++ b/net/bluetooth/hidp/core.c
@@ -428,7 +428,7 @@ static void hidp_set_timer(struct hidp_s
 static void hidp_del_timer(struct hidp_session *session)
 {
 	if (session->idle_to > 0)
-		del_timer(&session->timer);
+		del_timer_sync(&session->timer);
 }
 
 static void hidp_process_report(struct hidp_session *session, int type,

[PATCH 4.14 23/37] mtdblock: tolerate corrected bit-flips

[Greg Kroah-Hartman]

From: Bang Li <libang.linuxer@gmail.com>

commit 0c3089601f064d80b3838eceb711fcac04bceaad upstream.

mtd_read() may return -EUCLEAN in case of corrected bit-flips.This
particular condition should not be treated like an error.

Signed-off-by: Bang Li <libang.linuxer@gmail.com>
Fixes: e47f68587b82 ("mtd: check for max_bitflips in mtd_read_oob()")
Cc: <stable@vger.kernel.org> # v3.7
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230328163012.4264-1-libang.linuxer@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mtd/mtdblock.c |   12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

--- a/drivers/mtd/mtdblock.c
+++ b/drivers/mtd/mtdblock.c
@@ -185,7 +185,7 @@ static int do_cached_write (struct mtdbl
 				mtdblk->cache_state = STATE_EMPTY;
 				ret = mtd_read(mtd, sect_start, sect_size,
 					       &retlen, mtdblk->cache_data);
-				if (ret)
+				if (ret && !mtd_is_bitflip(ret))
 					return ret;
 				if (retlen != sect_size)
 					return -EIO;
@@ -220,8 +220,12 @@ static int do_cached_read (struct mtdblk
 	pr_debug("mtdblock: read on \"%s\" at 0x%lx, size 0x%x\n",
 			mtd->name, pos, len);
 
-	if (!sect_size)
-		return mtd_read(mtd, pos, len, &retlen, buf);
+	if (!sect_size) {
+		ret = mtd_read(mtd, pos, len, &retlen, buf);
+		if (ret && !mtd_is_bitflip(ret))
+			return ret;
+		return 0;
+	}
 
 	while (len > 0) {
 		unsigned long sect_start = (pos/sect_size)*sect_size;
@@ -241,7 +245,7 @@ static int do_cached_read (struct mtdblk
 			memcpy (buf, mtdblk->cache_data + offset, size);
 		} else {
 			ret = mtd_read(mtd, pos, size, &retlen, buf);
-			if (ret)
+			if (ret && !mtd_is_bitflip(ret))
 				return ret;
 			if (retlen != size)
 				return -EIO;

[PATCH 4.14 24/37] 9p/xen : Fix use after free bug in xen_9pfs_front_remove due to race condition

[Greg Kroah-Hartman]

From: Zheng Wang <zyytlz.wz@163.com>

[ Upstream commit ea4f1009408efb4989a0f139b70fb338e7f687d0 ]

In xen_9pfs_front_probe, it calls xen_9pfs_front_alloc_dataring
to init priv->rings and bound &ring->work with p9_xen_response.

When it calls xen_9pfs_front_event_handler to handle IRQ requests,
it will finally call schedule_work to start the work.

When we call xen_9pfs_front_remove to remove the driver, there
may be a sequence as follows:

Fix it by finishing the work before cleanup in xen_9pfs_front_free.

Note that, this bug is found by static analysis, which might be
false positive.

CPU0                  CPU1

                     |p9_xen_response
xen_9pfs_front_remove|
  xen_9pfs_front_free|
kfree(priv)          |
//free priv          |
                     |p9_tag_lookup
                     |//use priv->client

Fixes: 71ebd71921e4 ("xen/9pfs: connect to the backend")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/9p/trans_xen.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/9p/trans_xen.c b/net/9p/trans_xen.c
index ebe232fd45f74..f7008f1daaace 100644
--- a/net/9p/trans_xen.c
+++ b/net/9p/trans_xen.c
@@ -290,6 +290,10 @@ static void xen_9pfs_front_free(struct xen_9pfs_front_priv *priv)
 	write_unlock(&xen_9pfs_lock);
 
 	for (i = 0; i < priv->num_rings; i++) {
+		struct xen_9pfs_dataring *ring = &priv->rings[i];
+
+		cancel_work_sync(&ring->work);
+
 		if (!priv->rings[i].intf)
 			break;
 		if (priv->rings[i].irq > 0)
-- 
2.39.2

[PATCH 4.14 25/37] niu: Fix missing unwind goto in niu_alloc_channels()

[Greg Kroah-Hartman]

From: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>

[ Upstream commit 8ce07be703456acb00e83d99f3b8036252c33b02 ]

Smatch reports: drivers/net/ethernet/sun/niu.c:4525
	niu_alloc_channels() warn: missing unwind goto?

If niu_rbr_fill() fails, then we are directly returning 'err' without
freeing the channels.

Fix this by changing direct return to a goto 'out_err'.

Fixes: a3138df9f20e ("[NIU]: Add Sun Neptune ethernet driver.")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/sun/niu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/sun/niu.c b/drivers/net/ethernet/sun/niu.c
index 7ba9cad183414..08ac19884133b 100644
--- a/drivers/net/ethernet/sun/niu.c
+++ b/drivers/net/ethernet/sun/niu.c
@@ -4520,7 +4520,7 @@ static int niu_alloc_channels(struct niu *np)
 
 		err = niu_rbr_fill(np, rp, GFP_KERNEL);
 		if (err)
-			return err;
+			goto out_err;
 	}
 
 	tx_rings = kcalloc(num_tx_rings, sizeof(struct tx_ring_info),
-- 
2.39.2

[PATCH 4.14 26/37] qlcnic: check pci_reset_function result

[Greg Kroah-Hartman]

From: Denis Plotnikov <den-plotnikov@yandex-team.ru>

[ Upstream commit 7573099e10ca69c3be33995c1fcd0d241226816d ]

Static code analyzer complains to unchecked return value.
The result of pci_reset_function() is unchecked.
Despite, the issue is on the FLR supported code path and in that
case reset can be done with pcie_flr(), the patch uses less invasive
approach by adding the result check of pci_reset_function().

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 7e2cf4feba05 ("qlcnic: change driver hardware interface mechanism")
Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
index d344e9d438321..d3030bd967d5a 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
@@ -629,7 +629,13 @@ int qlcnic_fw_create_ctx(struct qlcnic_adapter *dev)
 	int i, err, ring;
 
 	if (dev->flags & QLCNIC_NEED_FLR) {
-		pci_reset_function(dev->pdev);
+		err = pci_reset_function(dev->pdev);
+		if (err) {
+			dev_err(&dev->pdev->dev,
+				"Adapter reset failed (%d). Please reboot\n",
+				err);
+			return err;
+		}
 		dev->flags &= ~QLCNIC_NEED_FLR;
 	}
 
-- 
2.39.2

[PATCH 4.14 27/37] net: macb: fix a memory corruption in extended buffer descriptor mode

[Greg Kroah-Hartman]

From: Roman Gushchin <roman.gushchin@linux.dev>

[ Upstream commit e8b74453555872851bdd7ea43a7c0ec39659834f ]

For quite some time we were chasing a bug which looked like a sudden
permanent failure of networking and mmc on some of our devices.
The bug was very sensitive to any software changes and even more to
any kernel debug options.

Finally we got a setup where the problem was reproducible with
CONFIG_DMA_API_DEBUG=y and it revealed the issue with the rx dma:

[   16.992082] ------------[ cut here ]------------
[   16.996779] DMA-API: macb ff0b0000.ethernet: device driver tries to free DMA memory it has not allocated [device address=0x0000000875e3e244] [size=1536 bytes]
[   17.011049] WARNING: CPU: 0 PID: 85 at kernel/dma/debug.c:1011 check_unmap+0x6a0/0x900
[   17.018977] Modules linked in: xxxxx
[   17.038823] CPU: 0 PID: 85 Comm: irq/55-8000f000 Not tainted 5.4.0 #28
[   17.045345] Hardware name: xxxxx
[   17.049528] pstate: 60000005 (nZCv daif -PAN -UAO)
[   17.054322] pc : check_unmap+0x6a0/0x900
[   17.058243] lr : check_unmap+0x6a0/0x900
[   17.062163] sp : ffffffc010003c40
[   17.065470] x29: ffffffc010003c40 x28: 000000004000c03c
[   17.070783] x27: ffffffc010da7048 x26: ffffff8878e38800
[   17.076095] x25: ffffff8879d22810 x24: ffffffc010003cc8
[   17.081407] x23: 0000000000000000 x22: ffffffc010a08750
[   17.086719] x21: ffffff8878e3c7c0 x20: ffffffc010acb000
[   17.092032] x19: 0000000875e3e244 x18: 0000000000000010
[   17.097343] x17: 0000000000000000 x16: 0000000000000000
[   17.102647] x15: ffffff8879e4a988 x14: 0720072007200720
[   17.107959] x13: 0720072007200720 x12: 0720072007200720
[   17.113261] x11: 0720072007200720 x10: 0720072007200720
[   17.118565] x9 : 0720072007200720 x8 : 000000000000022d
[   17.123869] x7 : 0000000000000015 x6 : 0000000000000098
[   17.129173] x5 : 0000000000000000 x4 : 0000000000000000
[   17.134475] x3 : 00000000ffffffff x2 : ffffffc010a1d370
[   17.139778] x1 : b420c9d75d27bb00 x0 : 0000000000000000
[   17.145082] Call trace:
[   17.147524]  check_unmap+0x6a0/0x900
[   17.151091]  debug_dma_unmap_page+0x88/0x90
[   17.155266]  gem_rx+0x114/0x2f0
[   17.158396]  macb_poll+0x58/0x100
[   17.161705]  net_rx_action+0x118/0x400
[   17.165445]  __do_softirq+0x138/0x36c
[   17.169100]  irq_exit+0x98/0xc0
[   17.172234]  __handle_domain_irq+0x64/0xc0
[   17.176320]  gic_handle_irq+0x5c/0xc0
[   17.179974]  el1_irq+0xb8/0x140
[   17.183109]  xiic_process+0x5c/0xe30
[   17.186677]  irq_thread_fn+0x28/0x90
[   17.190244]  irq_thread+0x208/0x2a0
[   17.193724]  kthread+0x130/0x140
[   17.196945]  ret_from_fork+0x10/0x20
[   17.200510] ---[ end trace 7240980785f81d6f ]---

[  237.021490] ------------[ cut here ]------------
[  237.026129] DMA-API: exceeded 7 overlapping mappings of cacheline 0x0000000021d79e7b
[  237.033886] WARNING: CPU: 0 PID: 0 at kernel/dma/debug.c:499 add_dma_entry+0x214/0x240
[  237.041802] Modules linked in: xxxxx
[  237.061637] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W         5.4.0 #28
[  237.068941] Hardware name: xxxxx
[  237.073116] pstate: 80000085 (Nzcv daIf -PAN -UAO)
[  237.077900] pc : add_dma_entry+0x214/0x240
[  237.081986] lr : add_dma_entry+0x214/0x240
[  237.086072] sp : ffffffc010003c30
[  237.089379] x29: ffffffc010003c30 x28: ffffff8878a0be00
[  237.094683] x27: 0000000000000180 x26: ffffff8878e387c0
[  237.099987] x25: 0000000000000002 x24: 0000000000000000
[  237.105290] x23: 000000000000003b x22: ffffffc010a0fa00
[  237.110594] x21: 0000000021d79e7b x20: ffffffc010abe600
[  237.115897] x19: 00000000ffffffef x18: 0000000000000010
[  237.121201] x17: 0000000000000000 x16: 0000000000000000
[  237.126504] x15: ffffffc010a0fdc8 x14: 0720072007200720
[  237.131807] x13: 0720072007200720 x12: 0720072007200720
[  237.137111] x11: 0720072007200720 x10: 0720072007200720
[  237.142415] x9 : 0720072007200720 x8 : 0000000000000259
[  237.147718] x7 : 0000000000000001 x6 : 0000000000000000
[  237.153022] x5 : ffffffc010003a20 x4 : 0000000000000001
[  237.158325] x3 : 0000000000000006 x2 : 0000000000000007
[  237.163628] x1 : 8ac721b3a7dc1c00 x0 : 0000000000000000
[  237.168932] Call trace:
[  237.171373]  add_dma_entry+0x214/0x240
[  237.175115]  debug_dma_map_page+0xf8/0x120
[  237.179203]  gem_rx_refill+0x190/0x280
[  237.182942]  gem_rx+0x224/0x2f0
[  237.186075]  macb_poll+0x58/0x100
[  237.189384]  net_rx_action+0x118/0x400
[  237.193125]  __do_softirq+0x138/0x36c
[  237.196780]  irq_exit+0x98/0xc0
[  237.199914]  __handle_domain_irq+0x64/0xc0
[  237.204000]  gic_handle_irq+0x5c/0xc0
[  237.207654]  el1_irq+0xb8/0x140
[  237.210789]  arch_cpu_idle+0x40/0x200
[  237.214444]  default_idle_call+0x18/0x30
[  237.218359]  do_idle+0x200/0x280
[  237.221578]  cpu_startup_entry+0x20/0x30
[  237.225493]  rest_init+0xe4/0xf0
[  237.228713]  arch_call_rest_init+0xc/0x14
[  237.232714]  start_kernel+0x47c/0x4a8
[  237.236367] ---[ end trace 7240980785f81d70 ]---

Lars was fast to find an explanation: according to the datasheet
bit 2 of the rx buffer descriptor entry has a different meaning in the
extended mode:
  Address [2] of beginning of buffer, or
  in extended buffer descriptor mode (DMA configuration register [28] = 1),
  indicates a valid timestamp in the buffer descriptor entry.

The macb driver didn't mask this bit while getting an address and it
eventually caused a memory corruption and a dma failure.

The problem is resolved by explicitly clearing the problematic bit
if hw timestamping is used.

Fixes: 7b4296148066 ("net: macb: Add support for PTP timestamps in DMA descriptors")
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Co-developed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230412232144.770336-1-roman.gushchin@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cadence/macb_main.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 456d84cbcc6be..9e51e0462e2c6 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -701,6 +701,10 @@ static dma_addr_t macb_get_addr(struct macb *bp, struct macb_dma_desc *desc)
 	}
 #endif
 	addr |= MACB_BF(RX_WADDR, MACB_BFEXT(RX_WADDR, desc->addr));
+#ifdef CONFIG_MACB_USE_HWSTAMP
+	if (bp->hw_dma_cap & HW_DMA_CAP_PTP)
+		addr &= ~GEM_BIT(DMA_RXVALID);
+#endif
 	return addr;
 }
 
-- 
2.39.2

[PATCH 4.14 28/37] i2c: imx-lpi2c: clean rx/tx buffers upon new message

[Greg Kroah-Hartman]

From: Alexander Stein <alexander.stein@ew.tq-group.com>

[ Upstream commit 987dd36c0141f6ab9f0fbf14d6b2ec3342dedb2f ]

When start sending a new message clear the Rx & Tx buffer pointers in
order to avoid using stale pointers.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-imx-lpi2c.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c
index ca4d554126579..511d332f47326 100644
--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -475,6 +475,8 @@ static int lpi2c_imx_xfer(struct i2c_adapter *adapter,
 		if (num == 1 && msgs[0].len == 0)
 			goto stop;
 
+		lpi2c_imx->rx_buf = NULL;
+		lpi2c_imx->tx_buf = NULL;
 		lpi2c_imx->delivered = 0;
 		lpi2c_imx->msglen = msgs[i].len;
 		init_completion(&lpi2c_imx->complete);
-- 
2.39.2

[PATCH 4.14 29/37] efi: sysfb_efi: Add quirk for Lenovo Yoga Book X91F/L

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 5ed213dd64681f84a01ceaa82fb336cf7d59ddcf ]

Another Lenovo convertable which reports a landscape resolution of
1920x1200 with a pitch of (1920 * 4) bytes, while the actual framebuffer
has a resolution of 1200x1920 with a pitch of (1200 * 4) bytes.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/sysfb_efi.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/x86/kernel/sysfb_efi.c b/arch/x86/kernel/sysfb_efi.c
index dd8d7636c5420..5bc0fedb33420 100644
--- a/arch/x86/kernel/sysfb_efi.c
+++ b/arch/x86/kernel/sysfb_efi.c
@@ -273,6 +273,14 @@ static const struct dmi_system_id efifb_dmi_swap_width_height[] __initconst = {
 					"IdeaPad Duet 3 10IGL5"),
 		},
 	},
+	{
+		/* Lenovo Yoga Book X91F / X91L */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			/* Non exact match to match F + L versions */
+			DMI_MATCH(DMI_PRODUCT_NAME, "Lenovo YB1-X91"),
+		},
+	},
 	{},
 };
 
-- 
2.39.2

[PATCH 4.14 30/37] verify_pefile: relax wrapper length check

[Greg Kroah-Hartman]

From: Robbie Harwood <rharwood@redhat.com>

[ Upstream commit 4fc5c74dde69a7eda172514aaeb5a7df3600adb3 ]

The PE Format Specification (section "The Attribute Certificate Table
(Image Only)") states that `dwLength` is to be rounded up to 8-byte
alignment when used for traversal.  Therefore, the field is not required
to be an 8-byte multiple in the first place.

Accordingly, pesign has not performed this alignment since version
0.110.  This causes kexec failure on pesign'd binaries with "PEFILE:
Signature wrapper len wrong".  Update the comment and relax the check.

Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jarkko Sakkinen <jarkko@kernel.org>
cc: Eric Biederman <ebiederm@xmission.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: keyrings@vger.kernel.org
cc: linux-crypto@vger.kernel.org
cc: kexec@lists.infradead.org
Link: https://learn.microsoft.com/en-us/windows/win32/debug/pe-format#the-attribute-certificate-table-image-only
Link: https://github.com/rhboot/pesign
Link: https://lore.kernel.org/r/20230220171254.592347-2-rharwood@redhat.com/ # v2
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 crypto/asymmetric_keys/verify_pefile.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/crypto/asymmetric_keys/verify_pefile.c b/crypto/asymmetric_keys/verify_pefile.c
index d178650fd524c..411977947adbe 100644
--- a/crypto/asymmetric_keys/verify_pefile.c
+++ b/crypto/asymmetric_keys/verify_pefile.c
@@ -139,11 +139,15 @@ static int pefile_strip_sig_wrapper(const void *pebuf,
 	pr_debug("sig wrapper = { %x, %x, %x }\n",
 		 wrapper.length, wrapper.revision, wrapper.cert_type);
 
-	/* Both pesign and sbsign round up the length of certificate table
-	 * (in optional header data directories) to 8 byte alignment.
+	/* sbsign rounds up the length of certificate table (in optional
+	 * header data directories) to 8 byte alignment.  However, the PE
+	 * specification states that while entries are 8-byte aligned, this is
+	 * not included in their length, and as a result, pesign has not
+	 * rounded up since 0.110.
 	 */
-	if (round_up(wrapper.length, 8) != ctx->sig_len) {
-		pr_debug("Signature wrapper len wrong\n");
+	if (wrapper.length > ctx->sig_len) {
+		pr_debug("Signature wrapper bigger than sig len (%x > %x)\n",
+			 ctx->sig_len, wrapper.length);
 		return -ELIBBAD;
 	}
 	if (wrapper.revision != WIN_CERT_REVISION_2_0) {
-- 
2.39.2

[PATCH 4.14 31/37] ubi: Fix failure attaching when vid_hdr offset equals to (sub)page size

[Greg Kroah-Hartman]

From: Zhihao Cheng <chengzhihao1@huawei.com>

commit 1e020e1b96afdecd20680b5b5be2a6ffc3d27628 upstream.

Following process will make ubi attaching failed since commit
1b42b1a36fc946 ("ubi: ensure that VID header offset ... size"):

ID="0xec,0xa1,0x00,0x15" # 128M 128KB 2KB
modprobe nandsim id_bytes=$ID
flash_eraseall /dev/mtd0
modprobe ubi mtd="0,2048"  # set vid_hdr offset as 2048 (one page)
(dmesg):
  ubi0 error: ubi_attach_mtd_dev [ubi]: VID header offset 2048 too large.
  UBI error: cannot attach mtd0
  UBI error: cannot initialize UBI, error -22

Rework original solution, the key point is making sure
'vid_hdr_shift + UBI_VID_HDR_SIZE < ubi->vid_hdr_alsize',
so we should check vid_hdr_shift rather not vid_hdr_offset.
Then, ubi still support (sub)page aligined VID header offset.

Fixes: 1b42b1a36fc946 ("ubi: ensure that VID header offset ... size")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Tested-by: Nicolas Schichan <nschichan@freebox.fr>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com> # v5.10, v4.19
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mtd/ubi/build.c |   21 +++++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)

--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -648,12 +648,6 @@ static int io_init(struct ubi_device *ub
 	ubi->ec_hdr_alsize = ALIGN(UBI_EC_HDR_SIZE, ubi->hdrs_min_io_size);
 	ubi->vid_hdr_alsize = ALIGN(UBI_VID_HDR_SIZE, ubi->hdrs_min_io_size);
 
-	if (ubi->vid_hdr_offset && ((ubi->vid_hdr_offset + UBI_VID_HDR_SIZE) >
-	    ubi->vid_hdr_alsize)) {
-		ubi_err(ubi, "VID header offset %d too large.", ubi->vid_hdr_offset);
-		return -EINVAL;
-	}
-
 	dbg_gen("min_io_size      %d", ubi->min_io_size);
 	dbg_gen("max_write_size   %d", ubi->max_write_size);
 	dbg_gen("hdrs_min_io_size %d", ubi->hdrs_min_io_size);
@@ -671,6 +665,21 @@ static int io_init(struct ubi_device *ub
 						ubi->vid_hdr_aloffset;
 	}
 
+	/*
+	 * Memory allocation for VID header is ubi->vid_hdr_alsize
+	 * which is described in comments in io.c.
+	 * Make sure VID header shift + UBI_VID_HDR_SIZE not exceeds
+	 * ubi->vid_hdr_alsize, so that all vid header operations
+	 * won't access memory out of bounds.
+	 */
+	if ((ubi->vid_hdr_shift + UBI_VID_HDR_SIZE) > ubi->vid_hdr_alsize) {
+		ubi_err(ubi, "Invalid VID header offset %d, VID header shift(%d)"
+			" + VID header size(%zu) > VID header aligned size(%d).",
+			ubi->vid_hdr_offset, ubi->vid_hdr_shift,
+			UBI_VID_HDR_SIZE, ubi->vid_hdr_alsize);
+		return -EINVAL;
+	}
+
 	/* Similar for the data offset */
 	ubi->leb_start = ubi->vid_hdr_offset + UBI_VID_HDR_SIZE;
 	ubi->leb_start = ALIGN(ubi->leb_start, ubi->min_io_size);

[PATCH 4.14 32/37] cgroup/cpuset: Wake up cpuset_attach_wq tasks in cpuset_cancel_attach()

[Greg Kroah-Hartman]

From: Waiman Long <longman@redhat.com>

commit ba9182a89626d5f83c2ee4594f55cb9c1e60f0e2 upstream.

After a successful cpuset_can_attach() call which increments the
attach_in_progress flag, either cpuset_cancel_attach() or cpuset_attach()
will be called later. In cpuset_attach(), tasks in cpuset_attach_wq,
if present, will be woken up at the end. That is not the case in
cpuset_cancel_attach(). So missed wakeup is possible if the attach
operation is somehow cancelled. Fix that by doing the wakeup in
cpuset_cancel_attach() as well.

Fixes: e44193d39e8d ("cpuset: let hotplug propagation work wait for task attaching")
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Cc: stable@vger.kernel.org # v3.11+
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/cgroup/cpuset.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/kernel/cgroup/cpuset.c
+++ b/kernel/cgroup/cpuset.c
@@ -1508,7 +1508,9 @@ static void cpuset_cancel_attach(struct
 	cs = css_cs(css);
 
 	mutex_lock(&cpuset_mutex);
-	css_cs(css)->attach_in_progress--;
+	cs->attach_in_progress--;
+	if (!cs->attach_in_progress)
+		wake_up(&cpuset_attach_wq);
 	mutex_unlock(&cpuset_mutex);
 }
 

[PATCH 4.14 33/37] watchdog: sbsa_wdog: Make sure the timeout programming is within the limits

[Greg Kroah-Hartman]

From: George Cherian <george.cherian@marvell.com>

commit 000987a38b53c172f435142a4026dd71378ca464 upstream.

Make sure to honour the max_hw_heartbeat_ms while programming the timeout
value to WOR. Clamp the timeout passed to sbsa_gwdt_set_timeout() to
make sure the programmed value is within the permissible range.

Fixes: abd3ac7902fb ("watchdog: sbsa: Support architecture version 1")

Signed-off-by: George Cherian <george.cherian@marvell.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230209021117.1512097-1-george.cherian@marvell.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Tyler Hicks (Microsoft) <code@tyhicks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/watchdog/sbsa_gwdt.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/watchdog/sbsa_gwdt.c
+++ b/drivers/watchdog/sbsa_gwdt.c
@@ -130,6 +130,7 @@ static int sbsa_gwdt_set_timeout(struct
 	struct sbsa_gwdt *gwdt = watchdog_get_drvdata(wdd);
 
 	wdd->timeout = timeout;
+	timeout = clamp_t(unsigned int, timeout, 1, wdd->max_hw_heartbeat_ms / 1000);
 
 	if (action)
 		writel(gwdt->clk * timeout,

[PATCH 4.14 34/37] coresight-etm4: Fix for() loop drvdata->nr_addr_cmp range bug

[Greg Kroah-Hartman]

From: Steve Clevenger <scclevenger@os.amperecomputing.com>

commit bf84937e882009075f57fd213836256fc65d96bc upstream.

In etm4_enable_hw, fix for() loop range to represent address comparator pairs.

Fixes: 2e1cdfe184b5 ("coresight-etm4x: Adding CoreSight ETM4x driver")
Cc: stable@vger.kernel.org
Signed-off-by: Steve Clevenger <scclevenger@os.amperecomputing.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/4a4ee61ce8ef402615a4528b21a051de3444fb7b.1677540079.git.scclevenger@os.amperecomputing.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hwtracing/coresight/coresight-etm4x.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/hwtracing/coresight/coresight-etm4x.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x.c
@@ -150,7 +150,7 @@ static void etm4_enable_hw(void *info)
 		writel_relaxed(config->ss_pe_cmp[i],
 			       drvdata->base + TRCSSPCICRn(i));
 	}
-	for (i = 0; i < drvdata->nr_addr_cmp; i++) {
+	for (i = 0; i < drvdata->nr_addr_cmp * 2; i++) {
 		writeq_relaxed(config->addr_val[i],
 			       drvdata->base + TRCACVRn(i));
 		writeq_relaxed(config->addr_acc[i],

[PATCH 4.14 35/37] KVM: arm64: Factor out core register ID enumeration

[Greg Kroah-Hartman]

From: Dave Martin <Dave.Martin@arm.com>

commit be25bbb392fad3a721d6d21b78639b60612b5439 upstream.

In preparation for adding logic to filter out some KVM_REG_ARM_CORE
registers from the KVM_GET_REG_LIST output, this patch factors out
the core register enumeration into a separate function and rebuilds
num_core_regs() on top of it.

This may be a little more expensive (depending on how good a job
the compiler does of specialising the code), but KVM_GET_REG_LIST
is not a hot path.

This will make it easier to consolidate ID filtering code in one
place.

No functional change.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Takahiro Itazuri <itazur@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/kvm/guest.c |   32 ++++++++++++++++++++++++--------
 1 file changed, 24 insertions(+), 8 deletions(-)

--- a/arch/arm64/kvm/guest.c
+++ b/arch/arm64/kvm/guest.c
@@ -193,9 +193,28 @@ int kvm_arch_vcpu_ioctl_set_regs(struct
 	return -EINVAL;
 }
 
+static int kvm_arm_copy_core_reg_indices(u64 __user *uindices)
+{
+	unsigned int i;
+	int n = 0;
+	const u64 core_reg = KVM_REG_ARM64 | KVM_REG_SIZE_U64 | KVM_REG_ARM_CORE;
+
+	for (i = 0; i < sizeof(struct kvm_regs) / sizeof(__u32); i++) {
+		if (uindices) {
+			if (put_user(core_reg | i, uindices))
+				return -EFAULT;
+			uindices++;
+		}
+
+		n++;
+	}
+
+	return n;
+}
+
 static unsigned long num_core_regs(void)
 {
-	return sizeof(struct kvm_regs) / sizeof(__u32);
+	return kvm_arm_copy_core_reg_indices(NULL);
 }
 
 /**
@@ -269,15 +288,12 @@ unsigned long kvm_arm_num_regs(struct kv
  */
 int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *uindices)
 {
-	unsigned int i;
-	const u64 core_reg = KVM_REG_ARM64 | KVM_REG_SIZE_U64 | KVM_REG_ARM_CORE;
 	int ret;
 
-	for (i = 0; i < sizeof(struct kvm_regs) / sizeof(__u32); i++) {
-		if (put_user(core_reg | i, uindices))
-			return -EFAULT;
-		uindices++;
-	}
+	ret = kvm_arm_copy_core_reg_indices(uindices);
+	if (ret)
+		return ret;
+	uindices += ret;
 
 	ret = kvm_arm_copy_fw_reg_indices(vcpu, uindices);
 	if (ret)

[PATCH 4.14 36/37] KVM: arm64: Filter out invalid core register IDs in KVM_GET_REG_LIST

[Greg Kroah-Hartman]

From: Dave Martin <Dave.Martin@arm.com>

commit df205b5c63281e4f32caac22adda18fd68795e80 upstream.

Since commit d26c25a9d19b ("arm64: KVM: Tighten guest core register
access from userspace"), KVM_{GET,SET}_ONE_REG rejects register IDs
that do not correspond to a single underlying architectural register.

KVM_GET_REG_LIST was not changed to match however: instead, it
simply yields a list of 32-bit register IDs that together cover the
whole kvm_regs struct.  This means that if userspace tries to use
the resulting list of IDs directly to drive calls to KVM_*_ONE_REG,
some of those calls will now fail.

This was not the intention.  Instead, iterating KVM_*_ONE_REG over
the list of IDs returned by KVM_GET_REG_LIST should be guaranteed
to work.

This patch fixes the problem by splitting validate_core_offset()
into a backend core_reg_size_from_offset() which does all of the
work except for checking that the size field in the register ID
matches, and kvm_arm_copy_reg_indices() and num_core_regs() are
converted to use this to enumerate the valid offsets.

kvm_arm_copy_reg_indices() now also sets the register ID size field
appropriately based on the value returned, so the register ID
supplied to userspace is fully qualified for use with the register
access ioctls.

Cc: stable@vger.kernel.org
Fixes: d26c25a9d19b ("arm64: KVM: Tighten guest core register access from userspace")
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Takahiro Itazuri <itazur@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/kvm/guest.c |   51 +++++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 43 insertions(+), 8 deletions(-)

--- a/arch/arm64/kvm/guest.c
+++ b/arch/arm64/kvm/guest.c
@@ -57,9 +57,8 @@ static u64 core_reg_offset_from_id(u64 i
 	return id & ~(KVM_REG_ARCH_MASK | KVM_REG_SIZE_MASK | KVM_REG_ARM_CORE);
 }
 
-static int validate_core_offset(const struct kvm_one_reg *reg)
+static int core_reg_size_from_offset(u64 off)
 {
-	u64 off = core_reg_offset_from_id(reg->id);
 	int size;
 
 	switch (off) {
@@ -89,11 +88,24 @@ static int validate_core_offset(const st
 		return -EINVAL;
 	}
 
-	if (KVM_REG_SIZE(reg->id) == size &&
-	    IS_ALIGNED(off, size / sizeof(__u32)))
-		return 0;
+	if (!IS_ALIGNED(off, size / sizeof(__u32)))
+		return -EINVAL;
 
-	return -EINVAL;
+	return size;
+}
+
+static int validate_core_offset(const struct kvm_one_reg *reg)
+{
+	u64 off = core_reg_offset_from_id(reg->id);
+	int size = core_reg_size_from_offset(off);
+
+	if (size < 0)
+		return -EINVAL;
+
+	if (KVM_REG_SIZE(reg->id) != size)
+		return -EINVAL;
+
+	return 0;
 }
 
 static int get_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
@@ -197,11 +209,34 @@ static int kvm_arm_copy_core_reg_indices
 {
 	unsigned int i;
 	int n = 0;
-	const u64 core_reg = KVM_REG_ARM64 | KVM_REG_SIZE_U64 | KVM_REG_ARM_CORE;
 
 	for (i = 0; i < sizeof(struct kvm_regs) / sizeof(__u32); i++) {
+		u64 reg = KVM_REG_ARM64 | KVM_REG_ARM_CORE | i;
+		int size = core_reg_size_from_offset(i);
+
+		if (size < 0)
+			continue;
+
+		switch (size) {
+		case sizeof(__u32):
+			reg |= KVM_REG_SIZE_U32;
+			break;
+
+		case sizeof(__u64):
+			reg |= KVM_REG_SIZE_U64;
+			break;
+
+		case sizeof(__uint128_t):
+			reg |= KVM_REG_SIZE_U128;
+			break;
+
+		default:
+			WARN_ON(1);
+			continue;
+		}
+
 		if (uindices) {
-			if (put_user(core_reg | i, uindices))
+			if (put_user(reg, uindices))
 				return -EFAULT;
 			uindices++;
 		}

[PATCH 4.14 37/37] arm64: KVM: Fix system register enumeration

[Greg Kroah-Hartman]

From: Marc Zyngier <marc.zyngier@arm.com>

commit 5d8d4af24460d079ecdb190254b14b528add1228 upstream.

The introduction of the SVE registers to userspace started with a
refactoring of the way we expose any register via the ONE_REG
interface.

Unfortunately, this change doesn't exactly behave as expected
if the number of registers is non-zero and consider everything
to be an error. The visible result is that QEMU barfs very early
when creating vcpus.

Make sure we only exit early in case there is an actual error, rather
than a positive number of registers...

Fixes: be25bbb392fa ("KVM: arm64: Factor out core register ID enumeration")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Takahiro Itazuri <itazur@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/kvm/guest.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/arch/arm64/kvm/guest.c
+++ b/arch/arm64/kvm/guest.c
@@ -326,17 +326,17 @@ int kvm_arm_copy_reg_indices(struct kvm_
 	int ret;
 
 	ret = kvm_arm_copy_core_reg_indices(uindices);
-	if (ret)
+	if (ret < 0)
 		return ret;
 	uindices += ret;
 
 	ret = kvm_arm_copy_fw_reg_indices(vcpu, uindices);
-	if (ret)
+	if (ret < 0)
 		return ret;
 	uindices += kvm_arm_get_fw_num_regs(vcpu);
 
 	ret = copy_timer_indices(vcpu, uindices);
-	if (ret)
+	if (ret < 0)
 		return ret;
 	uindices += NUM_TIMER_REGS;
 

RE: [PATCH 4.14 00/37] 4.14.313-rc1 review

[Chris Paterson]

Hello Greg,

> From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Sent: Tuesday, April 18, 2023 1:21 PM
> 
> This is the start of the stable review cycle for the 4.14.313 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 20 Apr 2023 12:02:44 +0000.
> Anything received after that time might be too late.

CIP configurations built and booted with Linux 4.14.313-rc1 (cdc53f89dfa8):
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/pipelines/840769024
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/commits/linux-4.14.y

Tested-by: Chris Paterson (CIP) <chris.paterson2@renesas.com>

Kind regards, Chris

Re: [PATCH 4.14 00/37] 4.14.313-rc1 review

[Guenter Roeck]

On Tue, Apr 18, 2023 at 02:21:10PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.313 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 20 Apr 2023 12:02:44 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 168 pass: 168 fail: 0
Qemu test results:
	total: 430 pass: 430 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 4.14 00/37] 4.14.313-rc1 review

[Naresh Kamboju]

On Tue, 18 Apr 2023 at 17:54, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.14.313 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 20 Apr 2023 12:02:44 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.313-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h


Recently we have upgraded the LTP test suite version and started noticing
these test failures on 4.14, 4.19 and 5.4 only on arm64.

Need to investigate test case issues or kernel issues.

Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>

NOTE:
-----
creat09.c:73: TINFO: User nobody: uid = 65534, gid = 65534
creat09.c:75: TINFO: Found unused GID 11: SUCCESS (0)
creat09.c:120: TINFO: File created with umask(0)
creat09.c:106: TPASS: mntpoint/testdir/creat.tmp: Owned by correct group
creat09.c:112: TPASS: mntpoint/testdir/creat.tmp: Setgid bit not set
creat09.c:106: TPASS: mntpoint/testdir/open.tmp: Owned by correct group
creat09.c:112: TPASS: mntpoint/testdir/open.tmp: Setgid bit not set
creat09.c:120: TINFO: File created with umask(S_IXGRP)
creat09.c:106: TPASS: mntpoint/testdir/creat.tmp: Owned by correct group
creat09.c:110: TFAIL: mntpoint/testdir/creat.tmp: Setgid bit is set
creat09.c:106: TPASS: mntpoint/testdir/open.tmp: Owned by correct group
creat09.c:110: TFAIL: mntpoint/testdir/open.tmp: Setgid bit is set

links:
 - https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.14.y/build/v4.14.311-105-gcdc53f89dfa8/testrun/16316521/suite/ltp-syscalls/test/creat09/log
 - https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.14.y/build/v4.14.311-105-gcdc53f89dfa8/testrun/16316521/suite/ltp-syscalls/test/creat09/history/

## Build
* kernel: 4.14.313-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-4.14.y
* git commit: cdc53f89dfa8e80182c9539a962df6c330a69931
* git describe: v4.14.311-105-gcdc53f89dfa8
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.14.y/build/v4.14.311-105-gcdc53f89dfa8

## Test Regressions (compared to v4.14.311-67-gf4c3927dd933)

* qemu-arm64, ltp-cve
  - cve-2018-13405 ( creat09 )

* qemu-arm64, ltp-syscalls
  - creat09

## Metric Regressions (compared to v4.14.311-67-gf4c3927dd933)

## Test Fixes (compared to v4.14.311-67-gf4c3927dd933)

## Metric Fixes (compared to v4.14.311-67-gf4c3927dd933)

## Test result summary
total: 65426, pass: 54434, fail: 2998, skip: 7868, xfail: 126

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 106 total, 104 passed, 2 failed
* arm64: 33 total, 32 passed, 1 failed
* i386: 20 total, 19 passed, 1 failed
* mips: 21 total, 21 passed, 0 failed
* parisc: 6 total, 6 passed, 0 failed
* powerpc: 8 total, 7 passed, 1 failed
* s390: 6 total, 5 passed, 1 failed
* sh: 12 total, 12 passed, 0 failed
* sparc: 6 total, 6 passed, 0 failed
* x86_64: 25 total, 24 passed, 1 failed

## Test suites summary
* boot
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers-dma-buf
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-firmware
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-membarrier
* kselftest-net
* kselftest-net-forwarding
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-zram
* kunit
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktBroadcast
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* rcutorture
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.14 00/37] 4.14.313-rc1 review

[Harshit Mogalapalli]

Hi Greg,

On 18/04/23 5:51 pm, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.313 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 

No problems seen on aarch64.

Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>

Thanks,
Harshit

> Responses should be made by Thu, 20 Apr 2023 12:02:44 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.313-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
>