[PATCH 5.4 00/39] 5.4.242-rc1 review

[PATCH 5.4 00/39] 5.4.242-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.4.242 release.
There are 39 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 26 Apr 2023 13:11:11 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.242-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.4.242-rc1

Ekaterina Orlova <vorobushek.ok@gmail.com>
    ASN.1: Fix check for strdup() success

Dan Carpenter <error27@gmail.com>
    iio: adc: at91-sama5d2_adc: fix an error code in at91_adc_allocate_trigger()

Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    pwm: meson: Explicitly set .polarity in .get_state()

Gao Xiang <hsiangkao@redhat.com>
    xfs: fix forkoff miscalculation related to XFS_LITINO(mp)

Kuniyuki Iwashima <kuniyu@amazon.com>
    sctp: Call inet6_destroy_sock() via sk->sk_destruct().

Kuniyuki Iwashima <kuniyu@amazon.com>
    dccp: Call inet6_destroy_sock() via sk->sk_destruct().

Kuniyuki Iwashima <kuniyu@amazon.com>
    inet6: Remove inet6_destroy_sock() in sk->sk_prot->destroy().

Kuniyuki Iwashima <kuniyu@amazon.com>
    tcp/udp: Call inet6_destroy_sock() in IPv6 sk->sk_destruct().

Kuniyuki Iwashima <kuniyu@amazon.com>
    udp: Call inet6_destroy_sock() in setsockopt(IPV6_ADDRFORM).

Baokun Li <libaokun1@huawei.com>
    ext4: fix use-after-free in ext4_xattr_set_entry

Ritesh Harjani <riteshh@linux.ibm.com>
    ext4: remove duplicate definition of ext4_xattr_ibody_inline_set()

Tudor Ambarus <tudor.ambarus@linaro.org>
    Revert "ext4: fix use-after-free in ext4_xattr_set_entry"

Pingfan Liu <kernelfans@gmail.com>
    x86/purgatory: Don't generate debug info for purgatory.ro

Jiaxun Yang <jiaxun.yang@flygoat.com>
    MIPS: Define RUNTIME_DISCARD_EXIT in LD script

Bhavya Kapoor <b-kapoor@ti.com>
    mmc: sdhci_am654: Set HIGH_SPEED_ENA for SDR12 and SDR25

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    memstick: fix memory leak if card device is never registered

Ryusuke Konishi <konishi.ryusuke@gmail.com>
    nilfs2: initialize unused bytes in segment summary blocks

Brian Masney <bmasney@redhat.com>
    iio: light: tsl2772: fix reading proximity-diodes from device tree

Juergen Gross <jgross@suse.com>
    xen/netback: use same error messages for same errors

Sagi Grimberg <sagi@grimberg.me>
    nvme-tcp: fix a possible UAF when failing to allocate an io queue

Heiko Carstens <hca@linux.ibm.com>
    s390/ptrace: fix PTRACE_GET_LAST_BREAK error handling

Álvaro Fernández Rojas <noltari@gmail.com>
    net: dsa: b53: mmap: add phy ops

Damien Le Moal <damien.lemoal@opensource.wdc.com>
    scsi: core: Improve scsi_vpd_inquiry() checks

Tomas Henzl <thenzl@redhat.com>
    scsi: megaraid_sas: Fix fw_crash_buffer_show()

Nick Desaulniers <ndesaulniers@google.com>
    selftests: sigaltstack: fix -Wuninitialized

Jonathan Denose <jdenose@chromium.org>
    Input: i8042 - add quirk for Fujitsu Lifebook A574/H

Douglas Raillard <douglas.raillard@arm.com>
    f2fs: Fix f2fs_truncate_partial_nodes ftrace event

Sebastian Basierski <sebastianx.basierski@intel.com>
    e1000e: Disable TSO on i219-LM card to increase speed

Daniel Borkmann <daniel@iogearbox.net>
    bpf: Fix incorrect verifier pruning due to missing register precision taints

Nikita Zhandarovich <n.zhandarovich@fintech.ru>
    mlxfw: fix null-ptr-deref in mlxfw_mfa2_tlv_next()

Aleksandr Loktionov <aleksandr.loktionov@intel.com>
    i40e: fix i40e_setup_misc_vector() error handling

Aleksandr Loktionov <aleksandr.loktionov@intel.com>
    i40e: fix accessing vsi->active_filters without holding lock

Florian Westphal <fw@strlen.de>
    netfilter: nf_tables: fix ifdef to also consider nf_tables=m

Xuan Zhuo <xuanzhuo@linux.alibaba.com>
    virtio_net: bugfix overflow inside xdp_linearize_page()

Gwangun Jung <exsociety@gmail.com>
    net: sched: sch_qfq: prevent slab-out-of-bounds in qfq_activate_agg

Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
    regulator: fan53555: Explicitly include bits header

Florian Westphal <fw@strlen.de>
    netfilter: br_netfilter: fix recent physdev match breakage

Marc Gonzalez <mgonzalez@freebox.fr>
    arm64: dts: meson-g12-common: specify full DMC range

Jianqun Xu <jay.xu@rock-chips.com>
    ARM: dts: rockchip: fix a typo error for rk3288 spdif node


-------------

Diffstat:

 Makefile                                           |  4 +-
 arch/arm/boot/dts/rk3288.dtsi                      |  2 +-
 arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi  |  3 +-
 arch/mips/kernel/vmlinux.lds.S                     |  2 +
 arch/s390/kernel/ptrace.c                          |  8 +---
 arch/x86/purgatory/Makefile                        |  5 ++-
 drivers/iio/adc/at91-sama5d2_adc.c                 |  2 +-
 drivers/iio/light/tsl2772.c                        |  1 +
 drivers/input/serio/i8042-x86ia64io.h              |  8 ++++
 drivers/memstick/core/memstick.c                   |  5 ++-
 drivers/mmc/host/sdhci_am654.c                     |  2 -
 drivers/net/dsa/b53/b53_mmap.c                     | 14 ++++++
 drivers/net/ethernet/intel/e1000e/netdev.c         | 51 +++++++++++-----------
 drivers/net/ethernet/intel/i40e/i40e_main.c        |  9 ++--
 .../ethernet/mellanox/mlxfw/mlxfw_mfa2_tlv_multi.c |  2 +
 drivers/net/virtio_net.c                           |  8 +++-
 drivers/net/xen-netback/netback.c                  |  6 +--
 drivers/nvme/host/tcp.c                            | 46 ++++++++++---------
 drivers/pwm/pwm-meson.c                            |  7 +++
 drivers/regulator/fan53555.c                       | 11 ++---
 drivers/scsi/megaraid/megaraid_sas_base.c          |  2 +-
 drivers/scsi/scsi.c                                | 11 ++++-
 fs/ext4/inline.c                                   | 11 +++--
 fs/ext4/xattr.c                                    | 26 +----------
 fs/ext4/xattr.h                                    |  6 +--
 fs/nilfs2/segment.c                                | 20 +++++++++
 fs/xfs/libxfs/xfs_attr_leaf.c                      |  8 +++-
 include/linux/skbuff.h                             |  5 ++-
 include/net/ipv6.h                                 |  2 +
 include/net/udp.h                                  |  2 +-
 include/net/udplite.h                              |  8 ----
 include/trace/events/f2fs.h                        |  2 +-
 kernel/bpf/verifier.c                              | 15 +++++++
 net/bridge/br_netfilter_hooks.c                    | 17 +++++---
 net/dccp/dccp.h                                    |  1 +
 net/dccp/ipv6.c                                    | 15 ++++---
 net/dccp/proto.c                                   |  8 +++-
 net/ipv4/udp.c                                     |  9 ++--
 net/ipv4/udplite.c                                 |  8 ++++
 net/ipv6/af_inet6.c                                | 15 ++++++-
 net/ipv6/ipv6_sockglue.c                           | 20 ++++-----
 net/ipv6/ping.c                                    |  6 ---
 net/ipv6/raw.c                                     |  2 -
 net/ipv6/tcp_ipv6.c                                |  8 +---
 net/ipv6/udp.c                                     | 17 ++++++--
 net/ipv6/udp_impl.h                                |  1 +
 net/ipv6/udplite.c                                 |  9 +++-
 net/l2tp/l2tp_ip6.c                                |  2 -
 net/sched/sch_qfq.c                                | 13 +++---
 net/sctp/socket.c                                  | 29 ++++++++----
 scripts/asn1_compiler.c                            |  2 +-
 .../selftests/sigaltstack/current_stack_pointer.h  | 23 ++++++++++
 tools/testing/selftests/sigaltstack/sas.c          |  7 +--
 53 files changed, 329 insertions(+), 197 deletions(-)

[PATCH 5.4 01/39] ARM: dts: rockchip: fix a typo error for rk3288 spdif node

[Greg Kroah-Hartman]

From: Jianqun Xu <jay.xu@rock-chips.com>

[ Upstream commit 02c84f91adb9a64b75ec97d772675c02a3e65ed7 ]

Fix the address in the spdif node name.

Fixes: 874e568e500a ("ARM: dts: rockchip: Add SPDIF transceiver for RK3288")
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Reviewed-by: Sjoerd Simons <sjoerd@collabora.com>
Link: https://lore.kernel.org/r/20230208091411.1603142-1-jay.xu@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3288.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 3a7d375389d0e..36f943a3f3ad2 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -942,7 +942,7 @@
 		status = "disabled";
 	};
 
-	spdif: sound@ff88b0000 {
+	spdif: sound@ff8b0000 {
 		compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif";
 		reg = <0x0 0xff8b0000 0x0 0x10000>;
 		#sound-dai-cells = <0>;
-- 
2.39.2

[PATCH 5.4 02/39] arm64: dts: meson-g12-common: specify full DMC range

[Greg Kroah-Hartman]

From: Marc Gonzalez <mgonzalez@freebox.fr>

[ Upstream commit aec4353114a408b3a831a22ba34942d05943e462 ]

According to S905X2 Datasheet - Revision 07:
DRAM Memory Controller (DMC) register area spans ff638000-ff63a000.

According to DeviceTree Specification - Release v0.4-rc1:
simple-bus nodes do not require reg property.

Fixes: 1499218c80c99a ("arm64: dts: move common G12A & G12B modes to meson-g12-common.dtsi")
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230327120932.2158389-2-mgonzalez@freebox.fr
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 937b27549d56d..a31b623fedb75 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -1376,10 +1376,9 @@
 
 			dmc: bus@38000 {
 				compatible = "simple-bus";
-				reg = <0x0 0x38000 0x0 0x400>;
 				#address-cells = <2>;
 				#size-cells = <2>;
-				ranges = <0x0 0x0 0x0 0x38000 0x0 0x400>;
+				ranges = <0x0 0x0 0x0 0x38000 0x0 0x2000>;
 
 				canvas: video-lut@48 {
 					compatible = "amlogic,canvas";
-- 
2.39.2

[PATCH 5.4 03/39] netfilter: br_netfilter: fix recent physdev match breakage

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 94623f579ce338b5fa61b5acaa5beb8aa657fb9e ]

Recent attempt to ensure PREROUTING hook is executed again when a
decrypted ipsec packet received on a bridge passes through the network
stack a second time broke the physdev match in INPUT hook.

We can't discard the nf_bridge info strct from sabotage_in hook, as
this is needed by the physdev match.

Keep the struct around and handle this with another conditional instead.

Fixes: 2b272bb558f1 ("netfilter: br_netfilter: disable sabotage_in hook after first suppression")
Reported-and-tested-by: Farid BENAMROUCHE <fariouche@yahoo.fr>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/skbuff.h          |  1 +
 net/bridge/br_netfilter_hooks.c | 17 +++++++++++------
 2 files changed, 12 insertions(+), 6 deletions(-)

diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index eab3a4d02f325..c951d16a40a70 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -257,6 +257,7 @@ struct nf_bridge_info {
 	u8			pkt_otherhost:1;
 	u8			in_prerouting:1;
 	u8			bridged_dnat:1;
+	u8			sabotage_in_done:1;
 	__u16			frag_max_size;
 	struct net_device	*physindev;
 
diff --git a/net/bridge/br_netfilter_hooks.c b/net/bridge/br_netfilter_hooks.c
index 43cb7aab4eed6..277b6fb92ac5f 100644
--- a/net/bridge/br_netfilter_hooks.c
+++ b/net/bridge/br_netfilter_hooks.c
@@ -868,12 +868,17 @@ static unsigned int ip_sabotage_in(void *priv,
 {
 	struct nf_bridge_info *nf_bridge = nf_bridge_info_get(skb);
 
-	if (nf_bridge && !nf_bridge->in_prerouting &&
-	    !netif_is_l3_master(skb->dev) &&
-	    !netif_is_l3_slave(skb->dev)) {
-		nf_bridge_info_free(skb);
-		state->okfn(state->net, state->sk, skb);
-		return NF_STOLEN;
+	if (nf_bridge) {
+		if (nf_bridge->sabotage_in_done)
+			return NF_ACCEPT;
+
+		if (!nf_bridge->in_prerouting &&
+		    !netif_is_l3_master(skb->dev) &&
+		    !netif_is_l3_slave(skb->dev)) {
+			nf_bridge->sabotage_in_done = 1;
+			state->okfn(state->net, state->sk, skb);
+			return NF_STOLEN;
+		}
 	}
 
 	return NF_ACCEPT;
-- 
2.39.2

[PATCH 5.4 04/39] regulator: fan53555: Explicitly include bits header

[Greg Kroah-Hartman]

From: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>

[ Upstream commit 4fb9a5060f73627303bc531ceaab1b19d0a24aef ]

Since commit f2a9eb975ab2 ("regulator: fan53555: Add support for
FAN53526") the driver makes use of the BIT() macro, but relies on the
bits header being implicitly included.

Explicitly pull the header in to avoid potential build failures in some
configurations.

While here, reorder include directives alphabetically.

Fixes: f2a9eb975ab2 ("regulator: fan53555: Add support for FAN53526")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230406171806.948290-3-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/fan53555.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index dbe477da4e559..99a1b2dc30933 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -8,18 +8,19 @@
 // Copyright (c) 2012 Marvell Technology Ltd.
 // Yunfan Zhang <yfzhang@marvell.com>
 
+#include <linux/bits.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/param.h>
-#include <linux/err.h>
 #include <linux/platform_device.h>
+#include <linux/regmap.h>
 #include <linux/regulator/driver.h>
+#include <linux/regulator/fan53555.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/of_regulator.h>
-#include <linux/of_device.h>
-#include <linux/i2c.h>
 #include <linux/slab.h>
-#include <linux/regmap.h>
-#include <linux/regulator/fan53555.h>
 
 /* Voltage setting */
 #define FAN53555_VSEL0		0x00
-- 
2.39.2

[PATCH 5.4 05/39] net: sched: sch_qfq: prevent slab-out-of-bounds in qfq_activate_agg

[Greg Kroah-Hartman]

From: Gwangun Jung <exsociety@gmail.com>

[ Upstream commit 3037933448f60f9acb705997eae62013ecb81e0d ]

If the TCA_QFQ_LMAX value is not offered through nlattr, lmax is determined by the MTU value of the network device.
The MTU of the loopback device can be set up to 2^31-1.
As a result, it is possible to have an lmax value that exceeds QFQ_MIN_LMAX.

Due to the invalid lmax value, an index is generated that exceeds the QFQ_MAX_INDEX(=24) value, causing out-of-bounds read/write errors.

The following reports a oob access:

[   84.582666] BUG: KASAN: slab-out-of-bounds in qfq_activate_agg.constprop.0 (net/sched/sch_qfq.c:1027 net/sched/sch_qfq.c:1060 net/sched/sch_qfq.c:1313)
[   84.583267] Read of size 4 at addr ffff88810f676948 by task ping/301
[   84.583686]
[   84.583797] CPU: 3 PID: 301 Comm: ping Not tainted 6.3.0-rc5 #1
[   84.584164] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[   84.584644] Call Trace:
[   84.584787]  <TASK>
[   84.584906] dump_stack_lvl (lib/dump_stack.c:107 (discriminator 1))
[   84.585108] print_report (mm/kasan/report.c:320 mm/kasan/report.c:430)
[   84.585570] kasan_report (mm/kasan/report.c:538)
[   84.585988] qfq_activate_agg.constprop.0 (net/sched/sch_qfq.c:1027 net/sched/sch_qfq.c:1060 net/sched/sch_qfq.c:1313)
[   84.586599] qfq_enqueue (net/sched/sch_qfq.c:1255)
[   84.587607] dev_qdisc_enqueue (net/core/dev.c:3776)
[   84.587749] __dev_queue_xmit (./include/net/sch_generic.h:186 net/core/dev.c:3865 net/core/dev.c:4212)
[   84.588763] ip_finish_output2 (./include/net/neighbour.h:546 net/ipv4/ip_output.c:228)
[   84.589460] ip_output (net/ipv4/ip_output.c:430)
[   84.590132] ip_push_pending_frames (./include/net/dst.h:444 net/ipv4/ip_output.c:126 net/ipv4/ip_output.c:1586 net/ipv4/ip_output.c:1606)
[   84.590285] raw_sendmsg (net/ipv4/raw.c:649)
[   84.591960] sock_sendmsg (net/socket.c:724 net/socket.c:747)
[   84.592084] __sys_sendto (net/socket.c:2142)
[   84.593306] __x64_sys_sendto (net/socket.c:2150)
[   84.593779] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
[   84.593902] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
[   84.594070] RIP: 0033:0x7fe568032066
[   84.594192] Code: 0e 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c09[ 84.594796] RSP: 002b:00007ffce388b4e8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c

Code starting with the faulting instruction
===========================================
[   84.595047] RAX: ffffffffffffffda RBX: 00007ffce388cc70 RCX: 00007fe568032066
[   84.595281] RDX: 0000000000000040 RSI: 00005605fdad6d10 RDI: 0000000000000003
[   84.595515] RBP: 00005605fdad6d10 R08: 00007ffce388eeec R09: 0000000000000010
[   84.595749] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040
[   84.595984] R13: 00007ffce388cc30 R14: 00007ffce388b4f0 R15: 0000001d00000001
[   84.596218]  </TASK>
[   84.596295]
[   84.596351] Allocated by task 291:
[   84.596467] kasan_save_stack (mm/kasan/common.c:46)
[   84.596597] kasan_set_track (mm/kasan/common.c:52)
[   84.596725] __kasan_kmalloc (mm/kasan/common.c:384)
[   84.596852] __kmalloc_node (./include/linux/kasan.h:196 mm/slab_common.c:967 mm/slab_common.c:974)
[   84.596979] qdisc_alloc (./include/linux/slab.h:610 ./include/linux/slab.h:731 net/sched/sch_generic.c:938)
[   84.597100] qdisc_create (net/sched/sch_api.c:1244)
[   84.597222] tc_modify_qdisc (net/sched/sch_api.c:1680)
[   84.597357] rtnetlink_rcv_msg (net/core/rtnetlink.c:6174)
[   84.597495] netlink_rcv_skb (net/netlink/af_netlink.c:2574)
[   84.597627] netlink_unicast (net/netlink/af_netlink.c:1340 net/netlink/af_netlink.c:1365)
[   84.597759] netlink_sendmsg (net/netlink/af_netlink.c:1942)
[   84.597891] sock_sendmsg (net/socket.c:724 net/socket.c:747)
[   84.598016] ____sys_sendmsg (net/socket.c:2501)
[   84.598147] ___sys_sendmsg (net/socket.c:2557)
[   84.598275] __sys_sendmsg (./include/linux/file.h:31 net/socket.c:2586)
[   84.598399] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
[   84.598520] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
[   84.598688]
[   84.598744] The buggy address belongs to the object at ffff88810f674000
[   84.598744]  which belongs to the cache kmalloc-8k of size 8192
[   84.599135] The buggy address is located 2664 bytes to the right of
[   84.599135]  allocated 7904-byte region [ffff88810f674000, ffff88810f675ee0)
[   84.599544]
[   84.599598] The buggy address belongs to the physical page:
[   84.599777] page:00000000e638567f refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10f670
[   84.600074] head:00000000e638567f order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[   84.600330] flags: 0x200000000010200(slab|head|node=0|zone=2)
[   84.600517] raw: 0200000000010200 ffff888100043180 dead000000000122 0000000000000000
[   84.600764] raw: 0000000000000000 0000000080020002 00000001ffffffff 0000000000000000
[   84.601009] page dumped because: kasan: bad access detected
[   84.601187]
[   84.601241] Memory state around the buggy address:
[   84.601396]  ffff88810f676800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   84.601620]  ffff88810f676880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   84.601845] >ffff88810f676900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   84.602069]                                               ^
[   84.602243]  ffff88810f676980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   84.602468]  ffff88810f676a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   84.602693] ==================================================================
[   84.602924] Disabling lock debugging due to kernel taint

Fixes: 3015f3d2a3cd ("pkt_sched: enable QFQ to support TSO/GSO")
Reported-by: Gwangun Jung <exsociety@gmail.com>
Signed-off-by: Gwangun Jung <exsociety@gmail.com>
Acked-by: Jamal Hadi Salim<jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/sch_qfq.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/net/sched/sch_qfq.c b/net/sched/sch_qfq.c
index 1eb339d224ae5..603bd3097bd84 100644
--- a/net/sched/sch_qfq.c
+++ b/net/sched/sch_qfq.c
@@ -421,15 +421,16 @@ static int qfq_change_class(struct Qdisc *sch, u32 classid, u32 parentid,
 	} else
 		weight = 1;
 
-	if (tb[TCA_QFQ_LMAX]) {
+	if (tb[TCA_QFQ_LMAX])
 		lmax = nla_get_u32(tb[TCA_QFQ_LMAX]);
-		if (lmax < QFQ_MIN_LMAX || lmax > (1UL << QFQ_MTU_SHIFT)) {
-			pr_notice("qfq: invalid max length %u\n", lmax);
-			return -EINVAL;
-		}
-	} else
+	else
 		lmax = psched_mtu(qdisc_dev(sch));
 
+	if (lmax < QFQ_MIN_LMAX || lmax > (1UL << QFQ_MTU_SHIFT)) {
+		pr_notice("qfq: invalid max length %u\n", lmax);
+		return -EINVAL;
+	}
+
 	inv_w = ONE_FP / weight;
 	weight = ONE_FP / inv_w;
 
-- 
2.39.2

[PATCH 5.4 06/39] virtio_net: bugfix overflow inside xdp_linearize_page()

[Greg Kroah-Hartman]

From: Xuan Zhuo <xuanzhuo@linux.alibaba.com>

[ Upstream commit 853618d5886bf94812f31228091cd37d308230f7 ]

Here we copy the data from the original buf to the new page. But we
not check that it may be overflow.

As long as the size received(including vnethdr) is greater than 3840
(PAGE_SIZE -VIRTIO_XDP_HEADROOM). Then the memcpy will overflow.

And this is completely possible, as long as the MTU is large, such
as 4096. In our test environment, this will cause crash. Since crash is
caused by the written memory, it is meaningless, so I do not include it.

Fixes: 72979a6c3590 ("virtio_net: xdp, add slowpath case for non contiguous buffers")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/virtio_net.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 5212d9cb03728..59d4449450ee8 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -646,8 +646,13 @@ static struct page *xdp_linearize_page(struct receive_queue *rq,
 				       int page_off,
 				       unsigned int *len)
 {
-	struct page *page = alloc_page(GFP_ATOMIC);
+	int tailroom = SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
+	struct page *page;
 
+	if (page_off + *len + tailroom > PAGE_SIZE)
+		return NULL;
+
+	page = alloc_page(GFP_ATOMIC);
 	if (!page)
 		return NULL;
 
@@ -655,7 +660,6 @@ static struct page *xdp_linearize_page(struct receive_queue *rq,
 	page_off += *len;
 
 	while (--*num_buf) {
-		int tailroom = SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
 		unsigned int buflen;
 		void *buf;
 		int off;
-- 
2.39.2

[PATCH 5.4 07/39] netfilter: nf_tables: fix ifdef to also consider nf_tables=m

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit c55c0e91c813589dc55bea6bf9a9fbfaa10ae41d ]

nftables can be built as a module, so fix the preprocessor conditional
accordingly.

Fixes: 478b360a47b7 ("netfilter: nf_tables: fix nf_trace always-on with XT_TRACE=n")
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/skbuff.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index c951d16a40a70..302a2ad679809 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -4227,7 +4227,7 @@ static inline void nf_reset_ct(struct sk_buff *skb)
 
 static inline void nf_reset_trace(struct sk_buff *skb)
 {
-#if IS_ENABLED(CONFIG_NETFILTER_XT_TARGET_TRACE) || defined(CONFIG_NF_TABLES)
+#if IS_ENABLED(CONFIG_NETFILTER_XT_TARGET_TRACE) || IS_ENABLED(CONFIG_NF_TABLES)
 	skb->nf_trace = 0;
 #endif
 }
@@ -4247,7 +4247,7 @@ static inline void __nf_copy(struct sk_buff *dst, const struct sk_buff *src,
 	dst->_nfct = src->_nfct;
 	nf_conntrack_get(skb_nfct(src));
 #endif
-#if IS_ENABLED(CONFIG_NETFILTER_XT_TARGET_TRACE) || defined(CONFIG_NF_TABLES)
+#if IS_ENABLED(CONFIG_NETFILTER_XT_TARGET_TRACE) || IS_ENABLED(CONFIG_NF_TABLES)
 	if (copy)
 		dst->nf_trace = src->nf_trace;
 #endif
-- 
2.39.2

[PATCH 5.4 08/39] i40e: fix accessing vsi->active_filters without holding lock

[Greg Kroah-Hartman]

From: Aleksandr Loktionov <aleksandr.loktionov@intel.com>

[ Upstream commit 8485d093b076e59baff424552e8aecfc5bd2d261 ]

Fix accessing vsi->active_filters without holding the mac_filter_hash_lock.
Move vsi->active_filters = 0 inside critical section and
move clear_bit(__I40E_VSI_OVERFLOW_PROMISC, vsi->state) after the critical
section to ensure the new filters from other threads can be added only after
filters cleaning in the critical section is finished.

Fixes: 278e7d0b9d68 ("i40e: store MAC/VLAN filters in a hash with the MAC Address as key")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 05f2f5637d3df..c5edee873ba54 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -13463,15 +13463,15 @@ static int i40e_add_vsi(struct i40e_vsi *vsi)
 		vsi->id = ctxt.vsi_number;
 	}
 
-	vsi->active_filters = 0;
-	clear_bit(__I40E_VSI_OVERFLOW_PROMISC, vsi->state);
 	spin_lock_bh(&vsi->mac_filter_hash_lock);
+	vsi->active_filters = 0;
 	/* If macvlan filters already exist, force them to get loaded */
 	hash_for_each_safe(vsi->mac_filter_hash, bkt, h, f, hlist) {
 		f->state = I40E_FILTER_NEW;
 		f_count++;
 	}
 	spin_unlock_bh(&vsi->mac_filter_hash_lock);
+	clear_bit(__I40E_VSI_OVERFLOW_PROMISC, vsi->state);
 
 	if (f_count) {
 		vsi->flags |= I40E_VSI_FLAG_FILTER_CHANGED;
-- 
2.39.2

[PATCH 5.4 09/39] i40e: fix i40e_setup_misc_vector() error handling

[Greg Kroah-Hartman]

From: Aleksandr Loktionov <aleksandr.loktionov@intel.com>

[ Upstream commit c86c00c6935505929cc9adb29ddb85e48c71f828 ]

Add error handling of i40e_setup_misc_vector() in i40e_rebuild().
In case interrupt vectors setup fails do not re-open vsi-s and
do not bring up vf-s, we have no interrupts to serve a traffic
anyway.

Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index c5edee873ba54..351d4c53297f5 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -10336,8 +10336,11 @@ static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired)
 					     pf->hw.aq.asq_last_status));
 	}
 	/* reinit the misc interrupt */
-	if (pf->flags & I40E_FLAG_MSIX_ENABLED)
+	if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
 		ret = i40e_setup_misc_vector(pf);
+		if (ret)
+			goto end_unlock;
+	}
 
 	/* Add a filter to drop all Flow control frames from any VSI from being
 	 * transmitted. By doing so we stop a malicious VF from sending out
-- 
2.39.2

[PATCH 5.4 10/39] mlxfw: fix null-ptr-deref in mlxfw_mfa2_tlv_next()

[Greg Kroah-Hartman]

From: Nikita Zhandarovich <n.zhandarovich@fintech.ru>

[ Upstream commit c0e73276f0fcbbd3d4736ba975d7dc7a48791b0c ]

Function mlxfw_mfa2_tlv_multi_get() returns NULL if 'tlv' in
question does not pass checks in mlxfw_mfa2_tlv_payload_get(). This
behaviour may lead to NULL pointer dereference in 'multi->total_len'.
Fix this issue by testing mlxfw_mfa2_tlv_multi_get()'s return value
against NULL.

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

Fixes: 410ed13cae39 ("Add the mlxfw module for Mellanox firmware flash process")
Co-developed-by: Natalia Petrova <n.petrova@fintech.ru>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230417120718.52325-1-n.zhandarovich@fintech.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2_tlv_multi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2_tlv_multi.c b/drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2_tlv_multi.c
index 017d68f1e1232..972c571b41587 100644
--- a/drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2_tlv_multi.c
+++ b/drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2_tlv_multi.c
@@ -31,6 +31,8 @@ mlxfw_mfa2_tlv_next(const struct mlxfw_mfa2_file *mfa2_file,
 
 	if (tlv->type == MLXFW_MFA2_TLV_MULTI_PART) {
 		multi = mlxfw_mfa2_tlv_multi_get(mfa2_file, tlv);
+		if (!multi)
+			return NULL;
 		tlv_len = NLA_ALIGN(tlv_len + be16_to_cpu(multi->total_len));
 	}
 
-- 
2.39.2

[PATCH 5.4 11/39] bpf: Fix incorrect verifier pruning due to missing register precision taints

[Greg Kroah-Hartman]

From: Daniel Borkmann <daniel@iogearbox.net>

[ Upstream commit 71b547f561247897a0a14f3082730156c0533fed ]

Juan Jose et al reported an issue found via fuzzing where the verifier's
pruning logic prematurely marks a program path as safe.

Consider the following program:

   0: (b7) r6 = 1024
   1: (b7) r7 = 0
   2: (b7) r8 = 0
   3: (b7) r9 = -2147483648
   4: (97) r6 %= 1025
   5: (05) goto pc+0
   6: (bd) if r6 <= r9 goto pc+2
   7: (97) r6 %= 1
   8: (b7) r9 = 0
   9: (bd) if r6 <= r9 goto pc+1
  10: (b7) r6 = 0
  11: (b7) r0 = 0
  12: (63) *(u32 *)(r10 -4) = r0
  13: (18) r4 = 0xffff888103693400 // map_ptr(ks=4,vs=48)
  15: (bf) r1 = r4
  16: (bf) r2 = r10
  17: (07) r2 += -4
  18: (85) call bpf_map_lookup_elem#1
  19: (55) if r0 != 0x0 goto pc+1
  20: (95) exit
  21: (77) r6 >>= 10
  22: (27) r6 *= 8192
  23: (bf) r1 = r0
  24: (0f) r0 += r6
  25: (79) r3 = *(u64 *)(r0 +0)
  26: (7b) *(u64 *)(r1 +0) = r3
  27: (95) exit

The verifier treats this as safe, leading to oob read/write access due
to an incorrect verifier conclusion:

  func#0 @0
  0: R1=ctx(off=0,imm=0) R10=fp0
  0: (b7) r6 = 1024                     ; R6_w=1024
  1: (b7) r7 = 0                        ; R7_w=0
  2: (b7) r8 = 0                        ; R8_w=0
  3: (b7) r9 = -2147483648              ; R9_w=-2147483648
  4: (97) r6 %= 1025                    ; R6_w=scalar()
  5: (05) goto pc+0
  6: (bd) if r6 <= r9 goto pc+2         ; R6_w=scalar(umin=18446744071562067969,var_off=(0xffffffff00000000; 0xffffffff)) R9_w=-2147483648
  7: (97) r6 %= 1                       ; R6_w=scalar()
  8: (b7) r9 = 0                        ; R9=0
  9: (bd) if r6 <= r9 goto pc+1         ; R6=scalar(umin=1) R9=0
  10: (b7) r6 = 0                       ; R6_w=0
  11: (b7) r0 = 0                       ; R0_w=0
  12: (63) *(u32 *)(r10 -4) = r0
  last_idx 12 first_idx 9
  regs=1 stack=0 before 11: (b7) r0 = 0
  13: R0_w=0 R10=fp0 fp-8=0000????
  13: (18) r4 = 0xffff8ad3886c2a00      ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
  15: (bf) r1 = r4                      ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
  16: (bf) r2 = r10                     ; R2_w=fp0 R10=fp0
  17: (07) r2 += -4                     ; R2_w=fp-4
  18: (85) call bpf_map_lookup_elem#1   ; R0=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0)
  19: (55) if r0 != 0x0 goto pc+1       ; R0=0
  20: (95) exit

  from 19 to 21: R0=map_value(off=0,ks=4,vs=48,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm????
  21: (77) r6 >>= 10                    ; R6_w=0
  22: (27) r6 *= 8192                   ; R6_w=0
  23: (bf) r1 = r0                      ; R0=map_value(off=0,ks=4,vs=48,imm=0) R1_w=map_value(off=0,ks=4,vs=48,imm=0)
  24: (0f) r0 += r6
  last_idx 24 first_idx 19
  regs=40 stack=0 before 23: (bf) r1 = r0
  regs=40 stack=0 before 22: (27) r6 *= 8192
  regs=40 stack=0 before 21: (77) r6 >>= 10
  regs=40 stack=0 before 19: (55) if r0 != 0x0 goto pc+1
  parent didn't have regs=40 stack=0 marks: R0_rw=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0) R6_rw=P0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm????
  last_idx 18 first_idx 9
  regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1
  regs=40 stack=0 before 17: (07) r2 += -4
  regs=40 stack=0 before 16: (bf) r2 = r10
  regs=40 stack=0 before 15: (bf) r1 = r4
  regs=40 stack=0 before 13: (18) r4 = 0xffff8ad3886c2a00
  regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0
  regs=40 stack=0 before 11: (b7) r0 = 0
  regs=40 stack=0 before 10: (b7) r6 = 0
  25: (79) r3 = *(u64 *)(r0 +0)         ; R0_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar()
  26: (7b) *(u64 *)(r1 +0) = r3         ; R1_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar()
  27: (95) exit

  from 9 to 11: R1=ctx(off=0,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0
  11: (b7) r0 = 0                       ; R0_w=0
  12: (63) *(u32 *)(r10 -4) = r0
  last_idx 12 first_idx 11
  regs=1 stack=0 before 11: (b7) r0 = 0
  13: R0_w=0 R10=fp0 fp-8=0000????
  13: (18) r4 = 0xffff8ad3886c2a00      ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
  15: (bf) r1 = r4                      ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
  16: (bf) r2 = r10                     ; R2_w=fp0 R10=fp0
  17: (07) r2 += -4                     ; R2_w=fp-4
  18: (85) call bpf_map_lookup_elem#1
  frame 0: propagating r6
  last_idx 19 first_idx 11
  regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1
  regs=40 stack=0 before 17: (07) r2 += -4
  regs=40 stack=0 before 16: (bf) r2 = r10
  regs=40 stack=0 before 15: (bf) r1 = r4
  regs=40 stack=0 before 13: (18) r4 = 0xffff8ad3886c2a00
  regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0
  regs=40 stack=0 before 11: (b7) r0 = 0
  parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_r=P0 R7=0 R8=0 R9=0 R10=fp0
  last_idx 9 first_idx 9
  regs=40 stack=0 before 9: (bd) if r6 <= r9 goto pc+1
  parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_rw=Pscalar() R7_w=0 R8_w=0 R9_rw=0 R10=fp0
  last_idx 8 first_idx 0
  regs=40 stack=0 before 8: (b7) r9 = 0
  regs=40 stack=0 before 7: (97) r6 %= 1
  regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2
  regs=40 stack=0 before 5: (05) goto pc+0
  regs=40 stack=0 before 4: (97) r6 %= 1025
  regs=40 stack=0 before 3: (b7) r9 = -2147483648
  regs=40 stack=0 before 2: (b7) r8 = 0
  regs=40 stack=0 before 1: (b7) r7 = 0
  regs=40 stack=0 before 0: (b7) r6 = 1024
  19: safe
  frame 0: propagating r6
  last_idx 9 first_idx 0
  regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2
  regs=40 stack=0 before 5: (05) goto pc+0
  regs=40 stack=0 before 4: (97) r6 %= 1025
  regs=40 stack=0 before 3: (b7) r9 = -2147483648
  regs=40 stack=0 before 2: (b7) r8 = 0
  regs=40 stack=0 before 1: (b7) r7 = 0
  regs=40 stack=0 before 0: (b7) r6 = 1024

  from 6 to 9: safe
  verification time 110 usec
  stack depth 4
  processed 36 insns (limit 1000000) max_states_per_insn 0 total_states 3 peak_states 3 mark_read 2

The verifier considers this program as safe by mistakenly pruning unsafe
code paths. In the above func#0, code lines 0-10 are of interest. In line
0-3 registers r6 to r9 are initialized with known scalar values. In line 4
the register r6 is reset to an unknown scalar given the verifier does not
track modulo operations. Due to this, the verifier can also not determine
precisely which branches in line 6 and 9 are taken, therefore it needs to
explore them both.

As can be seen, the verifier starts with exploring the false/fall-through
paths first. The 'from 19 to 21' path has both r6=0 and r9=0 and the pointer
arithmetic on r0 += r6 is therefore considered safe. Given the arithmetic,
r6 is correctly marked for precision tracking where backtracking kicks in
where it walks back the current path all the way where r6 was set to 0 in
the fall-through branch.

Next, the pruning logics pops the path 'from 9 to 11' from the stack. Also
here, the state of the registers is the same, that is, r6=0 and r9=0, so
that at line 19 the path can be pruned as it is considered safe. It is
interesting to note that the conditional in line 9 turned r6 into a more
precise state, that is, in the fall-through path at the beginning of line
10, it is R6=scalar(umin=1), and in the branch-taken path (which is analyzed
here) at the beginning of line 11, r6 turned into a known const r6=0 as
r9=0 prior to that and therefore (unsigned) r6 <= 0 concludes that r6 must
be 0 (**):

  [...]                                 ; R6_w=scalar()
  9: (bd) if r6 <= r9 goto pc+1         ; R6=scalar(umin=1) R9=0
  [...]

  from 9 to 11: R1=ctx(off=0,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0
  [...]

The next path is 'from 6 to 9'. The verifier considers the old and current
state equivalent, and therefore prunes the search incorrectly. Looking into
the two states which are being compared by the pruning logic at line 9, the
old state consists of R6_rwD=Pscalar() R9_rwD=0 R10=fp0 and the new state
consists of R1=ctx(off=0,imm=0) R6_w=scalar(umax=18446744071562067968)
R7_w=0 R8_w=0 R9_w=-2147483648 R10=fp0. While r6 had the reg->precise flag
correctly set in the old state, r9 did not. Both r6'es are considered as
equivalent given the old one is a superset of the current, more precise one,
however, r9's actual values (0 vs 0x80000000) mismatch. Given the old r9
did not have reg->precise flag set, the verifier does not consider the
register as contributing to the precision state of r6, and therefore it
considered both r9 states as equivalent. However, for this specific pruned
path (which is also the actual path taken at runtime), register r6 will be
0x400 and r9 0x80000000 when reaching line 21, thus oob-accessing the map.

The purpose of precision tracking is to initially mark registers (including
spilled ones) as imprecise to help verifier's pruning logic finding equivalent
states it can then prune if they don't contribute to the program's safety
aspects. For example, if registers are used for pointer arithmetic or to pass
constant length to a helper, then the verifier sets reg->precise flag and
backtracks the BPF program instruction sequence and chain of verifier states
to ensure that the given register or stack slot including their dependencies
are marked as precisely tracked scalar. This also includes any other registers
and slots that contribute to a tracked state of given registers/stack slot.
This backtracking relies on recorded jmp_history and is able to traverse
entire chain of parent states. This process ends only when all the necessary
registers/slots and their transitive dependencies are marked as precise.

The backtrack_insn() is called from the current instruction up to the first
instruction, and its purpose is to compute a bitmask of registers and stack
slots that need precision tracking in the parent's verifier state. For example,
if a current instruction is r6 = r7, then r6 needs precision after this
instruction and r7 needs precision before this instruction, that is, in the
parent state. Hence for the latter r7 is marked and r6 unmarked.

For the class of jmp/jmp32 instructions, backtrack_insn() today only looks
at call and exit instructions and for all other conditionals the masks
remain as-is. However, in the given situation register r6 has a dependency
on r9 (as described above in **), so also that one needs to be marked for
precision tracking. In other words, if an imprecise register influences a
precise one, then the imprecise register should also be marked precise.
Meaning, in the parent state both dest and src register need to be tracked
for precision and therefore the marking must be more conservative by setting
reg->precise flag for both. The precision propagation needs to cover both
for the conditional: if the src reg was marked but not the dst reg and vice
versa.

After the fix the program is correctly rejected:

  func#0 @0
  0: R1=ctx(off=0,imm=0) R10=fp0
  0: (b7) r6 = 1024                     ; R6_w=1024
  1: (b7) r7 = 0                        ; R7_w=0
  2: (b7) r8 = 0                        ; R8_w=0
  3: (b7) r9 = -2147483648              ; R9_w=-2147483648
  4: (97) r6 %= 1025                    ; R6_w=scalar()
  5: (05) goto pc+0
  6: (bd) if r6 <= r9 goto pc+2         ; R6_w=scalar(umin=18446744071562067969,var_off=(0xffffffff80000000; 0x7fffffff),u32_min=-2147483648) R9_w=-2147483648
  7: (97) r6 %= 1                       ; R6_w=scalar()
  8: (b7) r9 = 0                        ; R9=0
  9: (bd) if r6 <= r9 goto pc+1         ; R6=scalar(umin=1) R9=0
  10: (b7) r6 = 0                       ; R6_w=0
  11: (b7) r0 = 0                       ; R0_w=0
  12: (63) *(u32 *)(r10 -4) = r0
  last_idx 12 first_idx 9
  regs=1 stack=0 before 11: (b7) r0 = 0
  13: R0_w=0 R10=fp0 fp-8=0000????
  13: (18) r4 = 0xffff9290dc5bfe00      ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
  15: (bf) r1 = r4                      ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
  16: (bf) r2 = r10                     ; R2_w=fp0 R10=fp0
  17: (07) r2 += -4                     ; R2_w=fp-4
  18: (85) call bpf_map_lookup_elem#1   ; R0=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0)
  19: (55) if r0 != 0x0 goto pc+1       ; R0=0
  20: (95) exit

  from 19 to 21: R0=map_value(off=0,ks=4,vs=48,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm????
  21: (77) r6 >>= 10                    ; R6_w=0
  22: (27) r6 *= 8192                   ; R6_w=0
  23: (bf) r1 = r0                      ; R0=map_value(off=0,ks=4,vs=48,imm=0) R1_w=map_value(off=0,ks=4,vs=48,imm=0)
  24: (0f) r0 += r6
  last_idx 24 first_idx 19
  regs=40 stack=0 before 23: (bf) r1 = r0
  regs=40 stack=0 before 22: (27) r6 *= 8192
  regs=40 stack=0 before 21: (77) r6 >>= 10
  regs=40 stack=0 before 19: (55) if r0 != 0x0 goto pc+1
  parent didn't have regs=40 stack=0 marks: R0_rw=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0) R6_rw=P0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm????
  last_idx 18 first_idx 9
  regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1
  regs=40 stack=0 before 17: (07) r2 += -4
  regs=40 stack=0 before 16: (bf) r2 = r10
  regs=40 stack=0 before 15: (bf) r1 = r4
  regs=40 stack=0 before 13: (18) r4 = 0xffff9290dc5bfe00
  regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0
  regs=40 stack=0 before 11: (b7) r0 = 0
  regs=40 stack=0 before 10: (b7) r6 = 0
  25: (79) r3 = *(u64 *)(r0 +0)         ; R0_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar()
  26: (7b) *(u64 *)(r1 +0) = r3         ; R1_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar()
  27: (95) exit

  from 9 to 11: R1=ctx(off=0,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0
  11: (b7) r0 = 0                       ; R0_w=0
  12: (63) *(u32 *)(r10 -4) = r0
  last_idx 12 first_idx 11
  regs=1 stack=0 before 11: (b7) r0 = 0
  13: R0_w=0 R10=fp0 fp-8=0000????
  13: (18) r4 = 0xffff9290dc5bfe00      ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
  15: (bf) r1 = r4                      ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
  16: (bf) r2 = r10                     ; R2_w=fp0 R10=fp0
  17: (07) r2 += -4                     ; R2_w=fp-4
  18: (85) call bpf_map_lookup_elem#1
  frame 0: propagating r6
  last_idx 19 first_idx 11
  regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1
  regs=40 stack=0 before 17: (07) r2 += -4
  regs=40 stack=0 before 16: (bf) r2 = r10
  regs=40 stack=0 before 15: (bf) r1 = r4
  regs=40 stack=0 before 13: (18) r4 = 0xffff9290dc5bfe00
  regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0
  regs=40 stack=0 before 11: (b7) r0 = 0
  parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_r=P0 R7=0 R8=0 R9=0 R10=fp0
  last_idx 9 first_idx 9
  regs=40 stack=0 before 9: (bd) if r6 <= r9 goto pc+1
  parent didn't have regs=240 stack=0 marks: R1=ctx(off=0,imm=0) R6_rw=Pscalar() R7_w=0 R8_w=0 R9_rw=P0 R10=fp0
  last_idx 8 first_idx 0
  regs=240 stack=0 before 8: (b7) r9 = 0
  regs=40 stack=0 before 7: (97) r6 %= 1
  regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2
  regs=240 stack=0 before 5: (05) goto pc+0
  regs=240 stack=0 before 4: (97) r6 %= 1025
  regs=240 stack=0 before 3: (b7) r9 = -2147483648
  regs=40 stack=0 before 2: (b7) r8 = 0
  regs=40 stack=0 before 1: (b7) r7 = 0
  regs=40 stack=0 before 0: (b7) r6 = 1024
  19: safe

  from 6 to 9: R1=ctx(off=0,imm=0) R6_w=scalar(umax=18446744071562067968) R7_w=0 R8_w=0 R9_w=-2147483648 R10=fp0
  9: (bd) if r6 <= r9 goto pc+1
  last_idx 9 first_idx 0
  regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2
  regs=240 stack=0 before 5: (05) goto pc+0
  regs=240 stack=0 before 4: (97) r6 %= 1025
  regs=240 stack=0 before 3: (b7) r9 = -2147483648
  regs=40 stack=0 before 2: (b7) r8 = 0
  regs=40 stack=0 before 1: (b7) r7 = 0
  regs=40 stack=0 before 0: (b7) r6 = 1024
  last_idx 9 first_idx 0
  regs=200 stack=0 before 6: (bd) if r6 <= r9 goto pc+2
  regs=240 stack=0 before 5: (05) goto pc+0
  regs=240 stack=0 before 4: (97) r6 %= 1025
  regs=240 stack=0 before 3: (b7) r9 = -2147483648
  regs=40 stack=0 before 2: (b7) r8 = 0
  regs=40 stack=0 before 1: (b7) r7 = 0
  regs=40 stack=0 before 0: (b7) r6 = 1024
  11: R6=scalar(umax=18446744071562067968) R9=-2147483648
  11: (b7) r0 = 0                       ; R0_w=0
  12: (63) *(u32 *)(r10 -4) = r0
  last_idx 12 first_idx 11
  regs=1 stack=0 before 11: (b7) r0 = 0
  13: R0_w=0 R10=fp0 fp-8=0000????
  13: (18) r4 = 0xffff9290dc5bfe00      ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
  15: (bf) r1 = r4                      ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
  16: (bf) r2 = r10                     ; R2_w=fp0 R10=fp0
  17: (07) r2 += -4                     ; R2_w=fp-4
  18: (85) call bpf_map_lookup_elem#1   ; R0_w=map_value_or_null(id=3,off=0,ks=4,vs=48,imm=0)
  19: (55) if r0 != 0x0 goto pc+1       ; R0_w=0
  20: (95) exit

  from 19 to 21: R0=map_value(off=0,ks=4,vs=48,imm=0) R6=scalar(umax=18446744071562067968) R7=0 R8=0 R9=-2147483648 R10=fp0 fp-8=mmmm????
  21: (77) r6 >>= 10                    ; R6_w=scalar(umax=18014398507384832,var_off=(0x0; 0x3fffffffffffff))
  22: (27) r6 *= 8192                   ; R6_w=scalar(smax=9223372036854767616,umax=18446744073709543424,var_off=(0x0; 0xffffffffffffe000),s32_max=2147475456,u32_max=-8192)
  23: (bf) r1 = r0                      ; R0=map_value(off=0,ks=4,vs=48,imm=0) R1_w=map_value(off=0,ks=4,vs=48,imm=0)
  24: (0f) r0 += r6
  last_idx 24 first_idx 21
  regs=40 stack=0 before 23: (bf) r1 = r0
  regs=40 stack=0 before 22: (27) r6 *= 8192
  regs=40 stack=0 before 21: (77) r6 >>= 10
  parent didn't have regs=40 stack=0 marks: R0_rw=map_value(off=0,ks=4,vs=48,imm=0) R6_r=Pscalar(umax=18446744071562067968) R7=0 R8=0 R9=-2147483648 R10=fp0 fp-8=mmmm????
  last_idx 19 first_idx 11
  regs=40 stack=0 before 19: (55) if r0 != 0x0 goto pc+1
  regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1
  regs=40 stack=0 before 17: (07) r2 += -4
  regs=40 stack=0 before 16: (bf) r2 = r10
  regs=40 stack=0 before 15: (bf) r1 = r4
  regs=40 stack=0 before 13: (18) r4 = 0xffff9290dc5bfe00
  regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0
  regs=40 stack=0 before 11: (b7) r0 = 0
  parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_rw=Pscalar(umax=18446744071562067968) R7_w=0 R8_w=0 R9_w=-2147483648 R10=fp0
  last_idx 9 first_idx 0
  regs=40 stack=0 before 9: (bd) if r6 <= r9 goto pc+1
  regs=240 stack=0 before 6: (bd) if r6 <= r9 goto pc+2
  regs=240 stack=0 before 5: (05) goto pc+0
  regs=240 stack=0 before 4: (97) r6 %= 1025
  regs=240 stack=0 before 3: (b7) r9 = -2147483648
  regs=40 stack=0 before 2: (b7) r8 = 0
  regs=40 stack=0 before 1: (b7) r7 = 0
  regs=40 stack=0 before 0: (b7) r6 = 1024
  math between map_value pointer and register with unbounded min value is not allowed
  verification time 886 usec
  stack depth 4
  processed 49 insns (limit 1000000) max_states_per_insn 1 total_states 5 peak_states 5 mark_read 2

Fixes: b5dc0163d8fd ("bpf: precise scalar_value tracking")
Reported-by: Juan Jose Lopez Jaimez <jjlopezjaimez@google.com>
Reported-by: Meador Inge <meadori@google.com>
Reported-by: Simon Scannell <simonscannell@google.com>
Reported-by: Nenad Stojanovski <thenenadx@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Juan Jose Lopez Jaimez <jjlopezjaimez@google.com>
Reviewed-by: Meador Inge <meadori@google.com>
Reviewed-by: Simon Scannell <simonscannell@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/verifier.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index ca7e05ddbb46e..5476f61bad232 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -1563,6 +1563,21 @@ static int backtrack_insn(struct bpf_verifier_env *env, int idx,
 			}
 		} else if (opcode == BPF_EXIT) {
 			return -ENOTSUPP;
+		} else if (BPF_SRC(insn->code) == BPF_X) {
+			if (!(*reg_mask & (dreg | sreg)))
+				return 0;
+			/* dreg <cond> sreg
+			 * Both dreg and sreg need precision before
+			 * this insn. If only sreg was marked precise
+			 * before it would be equally necessary to
+			 * propagate it to dreg.
+			 */
+			*reg_mask |= (sreg | dreg);
+			 /* else dreg <cond> K
+			  * Only dreg still needs precision before
+			  * this insn, so for the K-based conditional
+			  * there is nothing new to be marked.
+			  */
 		}
 	} else if (class == BPF_LD) {
 		if (!(*reg_mask & dreg))
-- 
2.39.2

[PATCH 5.4 12/39] e1000e: Disable TSO on i219-LM card to increase speed

[Greg Kroah-Hartman]

From: Sebastian Basierski <sebastianx.basierski@intel.com>

[ Upstream commit 67d47b95119ad589b0a0b16b88b1dd9a04061ced ]

While using i219-LM card currently it was only possible to achieve
about 60% of maximum speed due to regression introduced in Linux 5.8.
This was caused by TSO not being disabled by default despite commit
f29801030ac6 ("e1000e: Disable TSO for buffer overrun workaround").
Fix that by disabling TSO during driver probe.

Fixes: f29801030ac6 ("e1000e: Disable TSO for buffer overrun workaround")
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230417205345.1030801-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 51 +++++++++++-----------
 1 file changed, 26 insertions(+), 25 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index b0d43985724d8..2c34d45354fe9 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -5270,31 +5270,6 @@ static void e1000_watchdog_task(struct work_struct *work)
 				ew32(TARC(0), tarc0);
 			}
 
-			/* disable TSO for pcie and 10/100 speeds, to avoid
-			 * some hardware issues
-			 */
-			if (!(adapter->flags & FLAG_TSO_FORCE)) {
-				switch (adapter->link_speed) {
-				case SPEED_10:
-				case SPEED_100:
-					e_info("10/100 speed: disabling TSO\n");
-					netdev->features &= ~NETIF_F_TSO;
-					netdev->features &= ~NETIF_F_TSO6;
-					break;
-				case SPEED_1000:
-					netdev->features |= NETIF_F_TSO;
-					netdev->features |= NETIF_F_TSO6;
-					break;
-				default:
-					/* oops */
-					break;
-				}
-				if (hw->mac.type == e1000_pch_spt) {
-					netdev->features &= ~NETIF_F_TSO;
-					netdev->features &= ~NETIF_F_TSO6;
-				}
-			}
-
 			/* enable transmits in the hardware, need to do this
 			 * after setting TARC(0)
 			 */
@@ -7223,6 +7198,32 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			    NETIF_F_RXCSUM |
 			    NETIF_F_HW_CSUM);
 
+	/* disable TSO for pcie and 10/100 speeds to avoid
+	 * some hardware issues and for i219 to fix transfer
+	 * speed being capped at 60%
+	 */
+	if (!(adapter->flags & FLAG_TSO_FORCE)) {
+		switch (adapter->link_speed) {
+		case SPEED_10:
+		case SPEED_100:
+			e_info("10/100 speed: disabling TSO\n");
+			netdev->features &= ~NETIF_F_TSO;
+			netdev->features &= ~NETIF_F_TSO6;
+			break;
+		case SPEED_1000:
+			netdev->features |= NETIF_F_TSO;
+			netdev->features |= NETIF_F_TSO6;
+			break;
+		default:
+			/* oops */
+			break;
+		}
+		if (hw->mac.type == e1000_pch_spt) {
+			netdev->features &= ~NETIF_F_TSO;
+			netdev->features &= ~NETIF_F_TSO6;
+		}
+	}
+
 	/* Set user-changeable features (subset of all device features) */
 	netdev->hw_features = netdev->features;
 	netdev->hw_features |= NETIF_F_RXFCS;
-- 
2.39.2

[PATCH 5.4 13/39] f2fs: Fix f2fs_truncate_partial_nodes ftrace event

[Greg Kroah-Hartman]

From: Douglas Raillard <douglas.raillard@arm.com>

[ Upstream commit 0b04d4c0542e8573a837b1d81b94209e48723b25 ]

Fix the nid_t field so that its size is correctly reported in the text
format embedded in trace.dat files. As it stands, it is reported as
being of size 4:

        field:nid_t nid[3];     offset:24;      size:4; signed:0;

Instead of 12:

        field:nid_t nid[3];     offset:24;      size:12;        signed:0;

This also fixes the reported offset of subsequent fields so that they
match with the actual struct layout.

Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/trace/events/f2fs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/trace/events/f2fs.h b/include/trace/events/f2fs.h
index a7613efc271ab..88266a7fbad26 100644
--- a/include/trace/events/f2fs.h
+++ b/include/trace/events/f2fs.h
@@ -499,7 +499,7 @@ TRACE_EVENT(f2fs_truncate_partial_nodes,
 	TP_STRUCT__entry(
 		__field(dev_t,	dev)
 		__field(ino_t,	ino)
-		__field(nid_t,	nid[3])
+		__array(nid_t,	nid, 3)
 		__field(int,	depth)
 		__field(int,	err)
 	),
-- 
2.39.2

[PATCH 5.4 14/39] Input: i8042 - add quirk for Fujitsu Lifebook A574/H

[Greg Kroah-Hartman]

From: Jonathan Denose <jdenose@chromium.org>

[ Upstream commit f5bad62f9107b701a6def7cac1f5f65862219b83 ]

Fujitsu Lifebook A574/H requires the nomux option to properly
probe the touchpad, especially when waking from sleep.

Signed-off-by: Jonathan Denose <jdenose@google.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230303152623.45859-1-jdenose@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/serio/i8042-x86ia64io.h | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 6b2e88da30766..92fb2f72511e8 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -601,6 +601,14 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
 		},
 		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
 	},
+	{
+		/* Fujitsu Lifebook A574/H */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "FMVA0501PZ"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
 	{
 		/* Gigabyte M912 */
 		.matches = {
-- 
2.39.2

[PATCH 5.4 15/39] selftests: sigaltstack: fix -Wuninitialized

[Greg Kroah-Hartman]

From: Nick Desaulniers <ndesaulniers@google.com>

[ Upstream commit 05107edc910135d27fe557267dc45be9630bf3dd ]

Building sigaltstack with clang via:
$ ARCH=x86 make LLVM=1 -C tools/testing/selftests/sigaltstack/

produces the following warning:
  warning: variable 'sp' is uninitialized when used here [-Wuninitialized]
  if (sp < (unsigned long)sstack ||
      ^~

Clang expects these to be declared at global scope; we've fixed this in
the kernel proper by using the macro `current_stack_pointer`. This is
defined in different headers for different target architectures, so just
create a new header that defines the arch-specific register names for
the stack pointer register, and define it for more targets (at least the
ones that support current_stack_pointer/ARCH_HAS_CURRENT_STACK_POINTER).

Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/lkml/CA+G9fYsi3OOu7yCsMutpzKDnBMAzJBCPimBp86LhGBa0eCnEpA@mail.gmail.com/
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../sigaltstack/current_stack_pointer.h       | 23 +++++++++++++++++++
 tools/testing/selftests/sigaltstack/sas.c     |  7 +-----
 2 files changed, 24 insertions(+), 6 deletions(-)
 create mode 100644 tools/testing/selftests/sigaltstack/current_stack_pointer.h

diff --git a/tools/testing/selftests/sigaltstack/current_stack_pointer.h b/tools/testing/selftests/sigaltstack/current_stack_pointer.h
new file mode 100644
index 0000000000000..ea9bdf3a90b16
--- /dev/null
+++ b/tools/testing/selftests/sigaltstack/current_stack_pointer.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#if __alpha__
+register unsigned long sp asm("$30");
+#elif __arm__ || __aarch64__ || __csky__ || __m68k__ || __mips__ || __riscv
+register unsigned long sp asm("sp");
+#elif __i386__
+register unsigned long sp asm("esp");
+#elif __loongarch64
+register unsigned long sp asm("$sp");
+#elif __ppc__
+register unsigned long sp asm("r1");
+#elif __s390x__
+register unsigned long sp asm("%15");
+#elif __sh__
+register unsigned long sp asm("r15");
+#elif __x86_64__
+register unsigned long sp asm("rsp");
+#elif __XTENSA__
+register unsigned long sp asm("a1");
+#else
+#error "implement current_stack_pointer equivalent"
+#endif
diff --git a/tools/testing/selftests/sigaltstack/sas.c b/tools/testing/selftests/sigaltstack/sas.c
index ad0f8df2ca0af..6e60545994916 100644
--- a/tools/testing/selftests/sigaltstack/sas.c
+++ b/tools/testing/selftests/sigaltstack/sas.c
@@ -19,6 +19,7 @@
 #include <errno.h>
 
 #include "../kselftest.h"
+#include "current_stack_pointer.h"
 
 #ifndef SS_AUTODISARM
 #define SS_AUTODISARM  (1U << 31)
@@ -40,12 +41,6 @@ void my_usr1(int sig, siginfo_t *si, void *u)
 	stack_t stk;
 	struct stk_data *p;
 
-#if __s390x__
-	register unsigned long sp asm("%15");
-#else
-	register unsigned long sp asm("sp");
-#endif
-
 	if (sp < (unsigned long)sstack ||
 			sp >= (unsigned long)sstack + SIGSTKSZ) {
 		ksft_exit_fail_msg("SP is not on sigaltstack\n");
-- 
2.39.2

[PATCH 5.4 16/39] scsi: megaraid_sas: Fix fw_crash_buffer_show()

[Greg Kroah-Hartman]

From: Tomas Henzl <thenzl@redhat.com>

[ Upstream commit 0808ed6ebbc292222ca069d339744870f6d801da ]

If crash_dump_buf is not allocated then crash dump can't be available.
Replace logical 'and' with 'or'.

Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20230324135249.9733-1-thenzl@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/megaraid/megaraid_sas_base.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index a261ce511e9ed..617148567d8d7 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -3235,7 +3235,7 @@ fw_crash_buffer_show(struct device *cdev,
 
 	spin_lock_irqsave(&instance->crashdump_lock, flags);
 	buff_offset = instance->fw_crash_buffer_offset;
-	if (!instance->crash_dump_buf &&
+	if (!instance->crash_dump_buf ||
 		!((instance->fw_crash_state == AVAILABLE) ||
 		(instance->fw_crash_state == COPYING))) {
 		dev_err(&instance->pdev->dev,
-- 
2.39.2

[PATCH 5.4 17/39] scsi: core: Improve scsi_vpd_inquiry() checks

[Greg Kroah-Hartman]

From: Damien Le Moal <damien.lemoal@opensource.wdc.com>

[ Upstream commit f0aa59a33d2ac2267d260fe21eaf92500df8e7b4 ]

Some USB-SATA adapters have broken behavior when an unsupported VPD page is
probed: Depending on the VPD page number, a 4-byte header with a valid VPD
page number but with a 0 length is returned. Currently, scsi_vpd_inquiry()
only checks that the page number is valid to determine if the page is
valid, which results in receiving only the 4-byte header for the
non-existent page. This error manifests itself very often with page 0xb9
for the Concurrent Positioning Ranges detection done by sd_read_cpr(),
resulting in the following error message:

sd 0:0:0:0: [sda] Invalid Concurrent Positioning Ranges VPD page

Prevent such misleading error message by adding a check in
scsi_vpd_inquiry() to verify that the page length is not 0.

Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20230322022211.116327-1-damien.lemoal@opensource.wdc.com
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 1ce3f90f782fd..2921256b59a0e 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -331,11 +331,18 @@ static int scsi_vpd_inquiry(struct scsi_device *sdev, unsigned char *buffer,
 	if (result)
 		return -EIO;
 
-	/* Sanity check that we got the page back that we asked for */
+	/*
+	 * Sanity check that we got the page back that we asked for and that
+	 * the page size is not 0.
+	 */
 	if (buffer[1] != page)
 		return -EIO;
 
-	return get_unaligned_be16(&buffer[2]) + 4;
+	result = get_unaligned_be16(&buffer[2]);
+	if (!result)
+		return -EIO;
+
+	return result + 4;
 }
 
 /**
-- 
2.39.2

[PATCH 5.4 18/39] net: dsa: b53: mmap: add phy ops

[Greg Kroah-Hartman]

From: Álvaro Fernández Rojas <noltari@gmail.com>

[ Upstream commit 45977e58ce65ed0459edc9a0466d9dfea09463f5 ]

Implement phy_read16() and phy_write16() ops for B53 MMAP to avoid accessing
B53_PORT_MII_PAGE registers which hangs the device.
This access should be done through the MDIO Mux bus controller.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/b53/b53_mmap.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/net/dsa/b53/b53_mmap.c b/drivers/net/dsa/b53/b53_mmap.c
index c628d0980c0b1..1d52cb3e46d52 100644
--- a/drivers/net/dsa/b53/b53_mmap.c
+++ b/drivers/net/dsa/b53/b53_mmap.c
@@ -215,6 +215,18 @@ static int b53_mmap_write64(struct b53_device *dev, u8 page, u8 reg,
 	return 0;
 }
 
+static int b53_mmap_phy_read16(struct b53_device *dev, int addr, int reg,
+			       u16 *value)
+{
+	return -EIO;
+}
+
+static int b53_mmap_phy_write16(struct b53_device *dev, int addr, int reg,
+				u16 value)
+{
+	return -EIO;
+}
+
 static const struct b53_io_ops b53_mmap_ops = {
 	.read8 = b53_mmap_read8,
 	.read16 = b53_mmap_read16,
@@ -226,6 +238,8 @@ static const struct b53_io_ops b53_mmap_ops = {
 	.write32 = b53_mmap_write32,
 	.write48 = b53_mmap_write48,
 	.write64 = b53_mmap_write64,
+	.phy_read16 = b53_mmap_phy_read16,
+	.phy_write16 = b53_mmap_phy_write16,
 };
 
 static int b53_mmap_probe(struct platform_device *pdev)
-- 
2.39.2

[PATCH 5.4 19/39] s390/ptrace: fix PTRACE_GET_LAST_BREAK error handling

[Greg Kroah-Hartman]

From: Heiko Carstens <hca@linux.ibm.com>

[ Upstream commit f9bbf25e7b2b74b52b2f269216a92657774f239c ]

Return -EFAULT if put_user() for the PTRACE_GET_LAST_BREAK
request fails, instead of silently ignoring it.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/ptrace.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index ad74472ce967e..34ca344039bbf 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -502,9 +502,7 @@ long arch_ptrace(struct task_struct *child, long request,
 		}
 		return 0;
 	case PTRACE_GET_LAST_BREAK:
-		put_user(child->thread.last_break,
-			 (unsigned long __user *) data);
-		return 0;
+		return put_user(child->thread.last_break, (unsigned long __user *)data);
 	case PTRACE_ENABLE_TE:
 		if (!MACHINE_HAS_TE)
 			return -EIO;
@@ -856,9 +854,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 		}
 		return 0;
 	case PTRACE_GET_LAST_BREAK:
-		put_user(child->thread.last_break,
-			 (unsigned int __user *) data);
-		return 0;
+		return put_user(child->thread.last_break, (unsigned int __user *)data);
 	}
 	return compat_ptrace_request(child, request, addr, data);
 }
-- 
2.39.2

[PATCH 5.4 20/39] nvme-tcp: fix a possible UAF when failing to allocate an io queue

[Greg Kroah-Hartman]

From: Sagi Grimberg <sagi@grimberg.me>

[ Upstream commit 88eaba80328b31ef81813a1207b4056efd7006a6 ]

When we allocate a nvme-tcp queue, we set the data_ready callback before
we actually need to use it. This creates the potential that if a stray
controller sends us data on the socket before we connect, we can trigger
the io_work and start consuming the socket.

In this case reported: we failed to allocate one of the io queues, and
as we start releasing the queues that we already allocated, we get
a UAF [1] from the io_work which is running before it should really.

Fix this by setting the socket ops callbacks only before we start the
queue, so that we can't accidentally schedule the io_work in the
initialization phase before the queue started. While we are at it,
rename nvme_tcp_restore_sock_calls to pair with nvme_tcp_setup_sock_ops.

[1]:
[16802.107284] nvme nvme4: starting error recovery
[16802.109166] nvme nvme4: Reconnecting in 10 seconds...
[16812.173535] nvme nvme4: failed to connect socket: -111
[16812.173745] nvme nvme4: Failed reconnect attempt 1
[16812.173747] nvme nvme4: Reconnecting in 10 seconds...
[16822.413555] nvme nvme4: failed to connect socket: -111
[16822.413762] nvme nvme4: Failed reconnect attempt 2
[16822.413765] nvme nvme4: Reconnecting in 10 seconds...
[16832.661274] nvme nvme4: creating 32 I/O queues.
[16833.919887] BUG: kernel NULL pointer dereference, address: 0000000000000088
[16833.920068] nvme nvme4: Failed reconnect attempt 3
[16833.920094] #PF: supervisor write access in kernel mode
[16833.920261] nvme nvme4: Reconnecting in 10 seconds...
[16833.920368] #PF: error_code(0x0002) - not-present page
[16833.921086] Workqueue: nvme_tcp_wq nvme_tcp_io_work [nvme_tcp]
[16833.921191] RIP: 0010:_raw_spin_lock_bh+0x17/0x30
...
[16833.923138] Call Trace:
[16833.923271]  <TASK>
[16833.923402]  lock_sock_nested+0x1e/0x50
[16833.923545]  nvme_tcp_try_recv+0x40/0xa0 [nvme_tcp]
[16833.923685]  nvme_tcp_io_work+0x68/0xa0 [nvme_tcp]
[16833.923824]  process_one_work+0x1e8/0x390
[16833.923969]  worker_thread+0x53/0x3d0
[16833.924104]  ? process_one_work+0x390/0x390
[16833.924240]  kthread+0x124/0x150
[16833.924376]  ? set_kthread_struct+0x50/0x50
[16833.924518]  ret_from_fork+0x1f/0x30
[16833.924655]  </TASK>

Reported-by: Yanjun Zhang <zhangyanjun@cestc.cn>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Yanjun Zhang <zhangyanjun@cestc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/tcp.c | 46 +++++++++++++++++++++++------------------
 1 file changed, 26 insertions(+), 20 deletions(-)

diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c
index 3169859cd3906..4250081595c14 100644
--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -1387,22 +1387,7 @@ static int nvme_tcp_alloc_queue(struct nvme_ctrl *nctrl,
 	if (ret)
 		goto err_init_connect;
 
-	queue->rd_enabled = true;
 	set_bit(NVME_TCP_Q_ALLOCATED, &queue->flags);
-	nvme_tcp_init_recv_ctx(queue);
-
-	write_lock_bh(&queue->sock->sk->sk_callback_lock);
-	queue->sock->sk->sk_user_data = queue;
-	queue->state_change = queue->sock->sk->sk_state_change;
-	queue->data_ready = queue->sock->sk->sk_data_ready;
-	queue->write_space = queue->sock->sk->sk_write_space;
-	queue->sock->sk->sk_data_ready = nvme_tcp_data_ready;
-	queue->sock->sk->sk_state_change = nvme_tcp_state_change;
-	queue->sock->sk->sk_write_space = nvme_tcp_write_space;
-#ifdef CONFIG_NET_RX_BUSY_POLL
-	queue->sock->sk->sk_ll_usec = 1;
-#endif
-	write_unlock_bh(&queue->sock->sk->sk_callback_lock);
 
 	return 0;
 
@@ -1419,7 +1404,7 @@ static int nvme_tcp_alloc_queue(struct nvme_ctrl *nctrl,
 	return ret;
 }
 
-static void nvme_tcp_restore_sock_calls(struct nvme_tcp_queue *queue)
+static void nvme_tcp_restore_sock_ops(struct nvme_tcp_queue *queue)
 {
 	struct socket *sock = queue->sock;
 
@@ -1434,7 +1419,7 @@ static void nvme_tcp_restore_sock_calls(struct nvme_tcp_queue *queue)
 static void __nvme_tcp_stop_queue(struct nvme_tcp_queue *queue)
 {
 	kernel_sock_shutdown(queue->sock, SHUT_RDWR);
-	nvme_tcp_restore_sock_calls(queue);
+	nvme_tcp_restore_sock_ops(queue);
 	cancel_work_sync(&queue->io_work);
 }
 
@@ -1448,21 +1433,42 @@ static void nvme_tcp_stop_queue(struct nvme_ctrl *nctrl, int qid)
 	__nvme_tcp_stop_queue(queue);
 }
 
+static void nvme_tcp_setup_sock_ops(struct nvme_tcp_queue *queue)
+{
+	write_lock_bh(&queue->sock->sk->sk_callback_lock);
+	queue->sock->sk->sk_user_data = queue;
+	queue->state_change = queue->sock->sk->sk_state_change;
+	queue->data_ready = queue->sock->sk->sk_data_ready;
+	queue->write_space = queue->sock->sk->sk_write_space;
+	queue->sock->sk->sk_data_ready = nvme_tcp_data_ready;
+	queue->sock->sk->sk_state_change = nvme_tcp_state_change;
+	queue->sock->sk->sk_write_space = nvme_tcp_write_space;
+#ifdef CONFIG_NET_RX_BUSY_POLL
+	queue->sock->sk->sk_ll_usec = 1;
+#endif
+	write_unlock_bh(&queue->sock->sk->sk_callback_lock);
+}
+
 static int nvme_tcp_start_queue(struct nvme_ctrl *nctrl, int idx)
 {
 	struct nvme_tcp_ctrl *ctrl = to_tcp_ctrl(nctrl);
+	struct nvme_tcp_queue *queue = &ctrl->queues[idx];
 	int ret;
 
+	queue->rd_enabled = true;
+	nvme_tcp_init_recv_ctx(queue);
+	nvme_tcp_setup_sock_ops(queue);
+
 	if (idx)
 		ret = nvmf_connect_io_queue(nctrl, idx, false);
 	else
 		ret = nvmf_connect_admin_queue(nctrl);
 
 	if (!ret) {
-		set_bit(NVME_TCP_Q_LIVE, &ctrl->queues[idx].flags);
+		set_bit(NVME_TCP_Q_LIVE, &queue->flags);
 	} else {
-		if (test_bit(NVME_TCP_Q_ALLOCATED, &ctrl->queues[idx].flags))
-			__nvme_tcp_stop_queue(&ctrl->queues[idx]);
+		if (test_bit(NVME_TCP_Q_ALLOCATED, &queue->flags))
+			__nvme_tcp_stop_queue(queue);
 		dev_err(nctrl->device,
 			"failed to connect queue: %d ret=%d\n", idx, ret);
 	}
-- 
2.39.2

[PATCH 5.4 21/39] xen/netback: use same error messages for same errors

[Greg Kroah-Hartman]

From: Juergen Gross <jgross@suse.com>

[ Upstream commit 2eca98e5b24d01c02b46c67be05a5f98cc9789b1 ]

Issue the same error message in case an illegal page boundary crossing
has been detected in both cases where this is tested.

Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Link: https://lore.kernel.org/r/20230329080259.14823-1-jgross@suse.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/xen-netback/netback.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index 3dfc5c66f1408..a3078755939e3 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -989,10 +989,8 @@ static void xenvif_tx_build_gops(struct xenvif_queue *queue,
 
 		/* No crossing a page as the payload mustn't fragment. */
 		if (unlikely((txreq.offset + txreq.size) > XEN_PAGE_SIZE)) {
-			netdev_err(queue->vif->dev,
-				   "txreq.offset: %u, size: %u, end: %lu\n",
-				   txreq.offset, txreq.size,
-				   (unsigned long)(txreq.offset&~XEN_PAGE_MASK) + txreq.size);
+			netdev_err(queue->vif->dev, "Cross page boundary, txreq.offset: %u, size: %u\n",
+				   txreq.offset, txreq.size);
 			xenvif_fatal_tx_err(queue->vif);
 			break;
 		}
-- 
2.39.2

[PATCH 5.4 22/39] iio: light: tsl2772: fix reading proximity-diodes from device tree

[Greg Kroah-Hartman]

From: Brian Masney <bmasney@redhat.com>

commit b1cb00d51e361cf5af93649917d9790e1623647e upstream.

tsl2772_read_prox_diodes() will correctly parse the properties from
device tree to determine which proximity diode(s) to read from, however
it didn't actually set this value on the struct tsl2772_settings. Let's
go ahead and fix that.

Reported-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/lkml/20230327120823.1369700-1-trix@redhat.com/
Fixes: 94cd1113aaa0 ("iio: tsl2772: add support for reading proximity led settings from device tree")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20230404011455.339454-1-bmasney@redhat.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/light/tsl2772.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/iio/light/tsl2772.c
+++ b/drivers/iio/light/tsl2772.c
@@ -606,6 +606,7 @@ static int tsl2772_read_prox_diodes(stru
 			return -EINVAL;
 		}
 	}
+	chip->settings.prox_diode = prox_diode_mask;
 
 	return 0;
 }

[PATCH 5.4 23/39] nilfs2: initialize unused bytes in segment summary blocks

[Greg Kroah-Hartman]

From: Ryusuke Konishi <konishi.ryusuke@gmail.com>

commit ef832747a82dfbc22a3702219cc716f449b24e4a upstream.

Syzbot still reports uninit-value in nilfs_add_checksums_on_logs() for
KMSAN enabled kernels after applying commit 7397031622e0 ("nilfs2:
initialize "struct nilfs_binfo_dat"->bi_pad field").

This is because the unused bytes at the end of each block in segment
summaries are not initialized.  So this fixes the issue by padding the
unused bytes with null bytes.

Link: https://lkml.kernel.org/r/20230417173513.12598-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+048585f3f4227bb2b49b@syzkaller.appspotmail.com
  Link: https://syzkaller.appspot.com/bug?extid=048585f3f4227bb2b49b
Cc: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nilfs2/segment.c |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -435,6 +435,23 @@ static int nilfs_segctor_reset_segment_b
 	return 0;
 }
 
+/**
+ * nilfs_segctor_zeropad_segsum - zero pad the rest of the segment summary area
+ * @sci: segment constructor object
+ *
+ * nilfs_segctor_zeropad_segsum() zero-fills unallocated space at the end of
+ * the current segment summary block.
+ */
+static void nilfs_segctor_zeropad_segsum(struct nilfs_sc_info *sci)
+{
+	struct nilfs_segsum_pointer *ssp;
+
+	ssp = sci->sc_blk_cnt > 0 ? &sci->sc_binfo_ptr : &sci->sc_finfo_ptr;
+	if (ssp->offset < ssp->bh->b_size)
+		memset(ssp->bh->b_data + ssp->offset, 0,
+		       ssp->bh->b_size - ssp->offset);
+}
+
 static int nilfs_segctor_feed_segment(struct nilfs_sc_info *sci)
 {
 	sci->sc_nblk_this_inc += sci->sc_curseg->sb_sum.nblocks;
@@ -443,6 +460,7 @@ static int nilfs_segctor_feed_segment(st
 				* The current segment is filled up
 				* (internal code)
 				*/
+	nilfs_segctor_zeropad_segsum(sci);
 	sci->sc_curseg = NILFS_NEXT_SEGBUF(sci->sc_curseg);
 	return nilfs_segctor_reset_segment_buffer(sci);
 }
@@ -547,6 +565,7 @@ static int nilfs_segctor_add_file_block(
 		goto retry;
 	}
 	if (unlikely(required)) {
+		nilfs_segctor_zeropad_segsum(sci);
 		err = nilfs_segbuf_extend_segsum(segbuf);
 		if (unlikely(err))
 			goto failed;
@@ -1531,6 +1550,7 @@ static int nilfs_segctor_collect(struct
 		nadd = min_t(int, nadd << 1, SC_MAX_SEGDELTA);
 		sci->sc_stage = prev_stage;
 	}
+	nilfs_segctor_zeropad_segsum(sci);
 	nilfs_segctor_truncate_segments(sci, sci->sc_curseg, nilfs->ns_sufile);
 	return 0;
 

[PATCH 5.4 24/39] memstick: fix memory leak if card device is never registered

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4b6d621c9d859ff89e68cebf6178652592676013 upstream.

When calling dev_set_name() memory is allocated for the name for the
struct device.  Once that structure device is registered, or attempted
to be registerd, with the driver core, the driver core will handle
cleaning up that memory when the device is removed from the system.

Unfortunatly for the memstick code, there is an error path that causes
the struct device to never be registered, and so the memory allocated in
dev_set_name will be leaked.  Fix that leak by manually freeing it right
before the memory for the device is freed.

Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: linux-mmc@vger.kernel.org
Fixes: 0252c3b4f018 ("memstick: struct device - replace bus_id with dev_name(), dev_set_name()")
Cc: stable <stable@kernel.org>
Co-developed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Link: https://lore.kernel.org/r/20230401200327.16800-1-gregkh@linuxfoundation.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/memstick/core/memstick.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/memstick/core/memstick.c
+++ b/drivers/memstick/core/memstick.c
@@ -412,6 +412,7 @@ static struct memstick_dev *memstick_all
 	return card;
 err_out:
 	host->card = old_card;
+	kfree_const(card->dev.kobj.name);
 	kfree(card);
 	return NULL;
 }
@@ -470,8 +471,10 @@ static void memstick_check(struct work_s
 				put_device(&card->dev);
 				host->card = NULL;
 			}
-		} else
+		} else {
+			kfree_const(card->dev.kobj.name);
 			kfree(card);
+		}
 	}
 
 out_power_off:

[PATCH 5.4 25/39] mmc: sdhci_am654: Set HIGH_SPEED_ENA for SDR12 and SDR25

[Greg Kroah-Hartman]

From: Bhavya Kapoor <b-kapoor@ti.com>

commit 2265098fd6a6272fde3fd1be5761f2f5895bd99a upstream.

Timing Information in Datasheet assumes that HIGH_SPEED_ENA=1 should be
set for SDR12 and SDR25 modes. But sdhci_am654 driver clears
HIGH_SPEED_ENA register. Thus, Modify sdhci_am654 to not clear
HIGH_SPEED_ENA (HOST_CONTROL[2]) bit for SDR12 and SDR25 speed modes.

Fixes: e374e87538f4 ("mmc: sdhci_am654: Clear HISPD_ENA in some lower speed modes")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230317092711.660897-1-b-kapoor@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/host/sdhci_am654.c |    2 --
 1 file changed, 2 deletions(-)

--- a/drivers/mmc/host/sdhci_am654.c
+++ b/drivers/mmc/host/sdhci_am654.c
@@ -227,8 +227,6 @@ static void sdhci_am654_write_b(struct s
 		 */
 		case MMC_TIMING_SD_HS:
 		case MMC_TIMING_MMC_HS:
-		case MMC_TIMING_UHS_SDR12:
-		case MMC_TIMING_UHS_SDR25:
 			val &= ~SDHCI_CTRL_HISPD;
 		}
 	}

[PATCH 5.4 26/39] MIPS: Define RUNTIME_DISCARD_EXIT in LD script

[Greg Kroah-Hartman]

From: Jiaxun Yang <jiaxun.yang@flygoat.com>

commit 6dcbd0a69c84a8ae7a442840a8cf6b1379dc8f16 upstream.

MIPS's exit sections are discarded at runtime as well.

Fixes link error:
`.exit.text' referenced in section `__jump_table' of fs/fuse/inode.o:
defined in discarded section `.exit.text' of fs/fuse/inode.o

Fixes: 99cb0d917ffa ("arch: fix broken BuildID for arm64 and riscv")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/mips/kernel/vmlinux.lds.S |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -10,6 +10,8 @@
  */
 #define BSS_FIRST_SECTIONS *(.bss..swapper_pg_dir)
 
+#define RUNTIME_DISCARD_EXIT
+
 #include <asm-generic/vmlinux.lds.h>
 
 #undef mips

[PATCH 5.4 27/39] x86/purgatory: Dont generate debug info for purgatory.ro

[Greg Kroah-Hartman]

From: Pingfan Liu <kernelfans@gmail.com>

commit 52416ffcf823ee11aa19792715664ab94757f111 upstream.

Purgatory.ro is a standalone binary that is not linked against the rest of
the kernel.  Its image is copied into an array that is linked to the
kernel, and from there kexec relocates it wherever it desires.

Unlike the debug info for vmlinux, which can be used for analyzing crash
such info is useless in purgatory.ro. And discarding them can save about
200K space.

 Original:
   259080  kexec-purgatory.o
 Stripped debug info:
    29152  kexec-purgatory.o

Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Acked-by: Dave Young <dyoung@redhat.com>
Link: https://lore.kernel.org/r/1596433788-3784-1-git-send-email-kernelfans@gmail.com
[Alyssa: fixed for LLVM_IAS=1 by adding -g to AFLAGS_REMOVE_*]
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/purgatory/Makefile |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/arch/x86/purgatory/Makefile
+++ b/arch/x86/purgatory/Makefile
@@ -27,7 +27,7 @@ KCOV_INSTRUMENT := n
 # make up the standalone purgatory.ro
 
 PURGATORY_CFLAGS_REMOVE := -mcmodel=kernel
-PURGATORY_CFLAGS := -mcmodel=large -ffreestanding -fno-zero-initialized-in-bss
+PURGATORY_CFLAGS := -mcmodel=large -ffreestanding -fno-zero-initialized-in-bss -g0
 PURGATORY_CFLAGS += $(DISABLE_STACKLEAK_PLUGIN) -DDISABLE_BRANCH_PROFILING
 
 # Default KBUILD_CFLAGS can have -pg option set when FTRACE is enabled. That
@@ -58,6 +58,9 @@ CFLAGS_sha256.o			+= $(PURGATORY_CFLAGS)
 CFLAGS_REMOVE_string.o		+= $(PURGATORY_CFLAGS_REMOVE)
 CFLAGS_string.o			+= $(PURGATORY_CFLAGS)
 
+AFLAGS_REMOVE_setup-x86_$(BITS).o	+= -g -Wa,-gdwarf-2
+AFLAGS_REMOVE_entry64.o			+= -g -Wa,-gdwarf-2
+
 $(obj)/purgatory.ro: $(PURGATORY_OBJS) FORCE
 		$(call if_changed,ld)
 

[PATCH 5.4 28/39] Revert "ext4: fix use-after-free in ext4_xattr_set_entry"

[Greg Kroah-Hartman]

From: Tudor Ambarus <tudor.ambarus@linaro.org>

This reverts commit bb8592efcf8ef2f62947745d3182ea05b5256a15 which is
commit 67d7d8ad99beccd9fe92d585b87f1760dc9018e3 upstream.

The order in which patches are queued to stable matters. This patch
has a logical dependency on commit 310c097c2bdbea253d6ee4e064f3e65580ef93ac
upstream, and failing to queue the latter results in a null-ptr-deref
reported at the Link below.

In order to avoid conflicts on stable, revert the commit just so that we
can queue its prerequisite patch first and then queue the same after.

Link: https://syzkaller.appspot.com/bug?extid=d5ebf56f3b1268136afd
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/xattr.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -2210,9 +2210,8 @@ int ext4_xattr_ibody_find(struct inode *
 	struct ext4_inode *raw_inode;
 	int error;
 
-	if (!EXT4_INODE_HAS_XATTR_SPACE(inode))
+	if (EXT4_I(inode)->i_extra_isize == 0)
 		return 0;
-
 	raw_inode = ext4_raw_inode(&is->iloc);
 	header = IHDR(inode, raw_inode);
 	is->s.base = is->s.first = IFIRST(header);
@@ -2240,9 +2239,8 @@ int ext4_xattr_ibody_inline_set(handle_t
 	struct ext4_xattr_search *s = &is->s;
 	int error;
 
-	if (!EXT4_INODE_HAS_XATTR_SPACE(inode))
+	if (EXT4_I(inode)->i_extra_isize == 0)
 		return -ENOSPC;
-
 	error = ext4_xattr_set_entry(i, s, handle, inode, false /* is_block */);
 	if (error)
 		return error;

[PATCH 5.4 29/39] ext4: remove duplicate definition of ext4_xattr_ibody_inline_set()

[Greg Kroah-Hartman]

From: Ritesh Harjani <riteshh@linux.ibm.com>

[ Upstream commit 310c097c2bdbea253d6ee4e064f3e65580ef93ac ]

ext4_xattr_ibody_inline_set() & ext4_xattr_ibody_set() have the exact
same definition.  Hence remove ext4_xattr_ibody_inline_set() and all
its call references. Convert the callers of it to call
ext4_xattr_ibody_set() instead.

[ Modified to preserve ext4_xattr_ibody_set() and remove
  ext4_xattr_ibody_inline_set() instead. -- TYT ]

Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/fd566b799bbbbe9b668eb5eecde5b5e319e3694f.1622685482.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/inline.c |   11 +++++------
 fs/ext4/xattr.c  |   26 +-------------------------
 fs/ext4/xattr.h  |    6 +++---
 3 files changed, 9 insertions(+), 34 deletions(-)

--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -206,7 +206,7 @@ out:
 /*
  * write the buffer to the inline inode.
  * If 'create' is set, we don't need to do the extra copy in the xattr
- * value since it is already handled by ext4_xattr_ibody_inline_set.
+ * value since it is already handled by ext4_xattr_ibody_set.
  * That saves us one memcpy.
  */
 static void ext4_write_inline_data(struct inode *inode, struct ext4_iloc *iloc,
@@ -288,7 +288,7 @@ static int ext4_create_inline_data(handl
 
 	BUG_ON(!is.s.not_found);
 
-	error = ext4_xattr_ibody_inline_set(handle, inode, &i, &is);
+	error = ext4_xattr_ibody_set(handle, inode, &i, &is);
 	if (error) {
 		if (error == -ENOSPC)
 			ext4_clear_inode_state(inode,
@@ -360,7 +360,7 @@ static int ext4_update_inline_data(handl
 	i.value = value;
 	i.value_len = len;
 
-	error = ext4_xattr_ibody_inline_set(handle, inode, &i, &is);
+	error = ext4_xattr_ibody_set(handle, inode, &i, &is);
 	if (error)
 		goto out;
 
@@ -433,7 +433,7 @@ static int ext4_destroy_inline_data_nolo
 	if (error)
 		goto out;
 
-	error = ext4_xattr_ibody_inline_set(handle, inode, &i, &is);
+	error = ext4_xattr_ibody_set(handle, inode, &i, &is);
 	if (error)
 		goto out;
 
@@ -1969,8 +1969,7 @@ int ext4_inline_data_truncate(struct ino
 			i.value = value;
 			i.value_len = i_size > EXT4_MIN_INLINE_DATA_SIZE ?
 					i_size - EXT4_MIN_INLINE_DATA_SIZE : 0;
-			err = ext4_xattr_ibody_inline_set(handle, inode,
-							  &i, &is);
+			err = ext4_xattr_ibody_set(handle, inode, &i, &is);
 			if (err)
 				goto out_error;
 		}
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -2231,31 +2231,7 @@ int ext4_xattr_ibody_find(struct inode *
 	return 0;
 }
 
-int ext4_xattr_ibody_inline_set(handle_t *handle, struct inode *inode,
-				struct ext4_xattr_info *i,
-				struct ext4_xattr_ibody_find *is)
-{
-	struct ext4_xattr_ibody_header *header;
-	struct ext4_xattr_search *s = &is->s;
-	int error;
-
-	if (EXT4_I(inode)->i_extra_isize == 0)
-		return -ENOSPC;
-	error = ext4_xattr_set_entry(i, s, handle, inode, false /* is_block */);
-	if (error)
-		return error;
-	header = IHDR(inode, ext4_raw_inode(&is->iloc));
-	if (!IS_LAST_ENTRY(s->first)) {
-		header->h_magic = cpu_to_le32(EXT4_XATTR_MAGIC);
-		ext4_set_inode_state(inode, EXT4_STATE_XATTR);
-	} else {
-		header->h_magic = cpu_to_le32(0);
-		ext4_clear_inode_state(inode, EXT4_STATE_XATTR);
-	}
-	return 0;
-}
-
-static int ext4_xattr_ibody_set(handle_t *handle, struct inode *inode,
+int ext4_xattr_ibody_set(handle_t *handle, struct inode *inode,
 				struct ext4_xattr_info *i,
 				struct ext4_xattr_ibody_find *is)
 {
--- a/fs/ext4/xattr.h
+++ b/fs/ext4/xattr.h
@@ -199,9 +199,9 @@ extern int ext4_xattr_ibody_find(struct
 extern int ext4_xattr_ibody_get(struct inode *inode, int name_index,
 				const char *name,
 				void *buffer, size_t buffer_size);
-extern int ext4_xattr_ibody_inline_set(handle_t *handle, struct inode *inode,
-				       struct ext4_xattr_info *i,
-				       struct ext4_xattr_ibody_find *is);
+extern int ext4_xattr_ibody_set(handle_t *handle, struct inode *inode,
+				struct ext4_xattr_info *i,
+				struct ext4_xattr_ibody_find *is);
 
 extern struct mb_cache *ext4_xattr_create_cache(void);
 extern void ext4_xattr_destroy_cache(struct mb_cache *);

[PATCH 5.4 30/39] ext4: fix use-after-free in ext4_xattr_set_entry

[Greg Kroah-Hartman]

From: Baokun Li <libaokun1@huawei.com>

[ Upstream commit 67d7d8ad99beccd9fe92d585b87f1760dc9018e3 ]

Hulk Robot reported a issue:
==================================================================
BUG: KASAN: use-after-free in ext4_xattr_set_entry+0x18ab/0x3500
Write of size 4105 at addr ffff8881675ef5f4 by task syz-executor.0/7092

CPU: 1 PID: 7092 Comm: syz-executor.0 Not tainted 4.19.90-dirty #17
Call Trace:
[...]
 memcpy+0x34/0x50 mm/kasan/kasan.c:303
 ext4_xattr_set_entry+0x18ab/0x3500 fs/ext4/xattr.c:1747
 ext4_xattr_ibody_inline_set+0x86/0x2a0 fs/ext4/xattr.c:2205
 ext4_xattr_set_handle+0x940/0x1300 fs/ext4/xattr.c:2386
 ext4_xattr_set+0x1da/0x300 fs/ext4/xattr.c:2498
 __vfs_setxattr+0x112/0x170 fs/xattr.c:149
 __vfs_setxattr_noperm+0x11b/0x2a0 fs/xattr.c:180
 __vfs_setxattr_locked+0x17b/0x250 fs/xattr.c:238
 vfs_setxattr+0xed/0x270 fs/xattr.c:255
 setxattr+0x235/0x330 fs/xattr.c:520
 path_setxattr+0x176/0x190 fs/xattr.c:539
 __do_sys_lsetxattr fs/xattr.c:561 [inline]
 __se_sys_lsetxattr fs/xattr.c:557 [inline]
 __x64_sys_lsetxattr+0xc2/0x160 fs/xattr.c:557
 do_syscall_64+0xdf/0x530 arch/x86/entry/common.c:298
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x459fe9
RSP: 002b:00007fa5e54b4c08 EFLAGS: 00000246 ORIG_RAX: 00000000000000bd
RAX: ffffffffffffffda RBX: 000000000051bf60 RCX: 0000000000459fe9
RDX: 00000000200003c0 RSI: 0000000020000180 RDI: 0000000020000140
RBP: 000000000051bf60 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000001009 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffc73c93fc0 R14: 000000000051bf60 R15: 00007fa5e54b4d80
[...]
==================================================================

Above issue may happen as follows:
-------------------------------------
ext4_xattr_set
  ext4_xattr_set_handle
    ext4_xattr_ibody_find
      >> s->end < s->base
      >> no EXT4_STATE_XATTR
      >> xattr_check_inode is not executed
    ext4_xattr_ibody_set
      ext4_xattr_set_entry
       >> size_t min_offs = s->end - s->base
       >> UAF in memcpy

we can easily reproduce this problem with the following commands:
    mkfs.ext4 -F /dev/sda
    mount -o debug_want_extra_isize=128 /dev/sda /mnt
    touch /mnt/file
    setfattr -n user.cat -v `seq -s z 4096|tr -d '[:digit:]'` /mnt/file

In ext4_xattr_ibody_find, we have the following assignment logic:
  header = IHDR(inode, raw_inode)
         = raw_inode + EXT4_GOOD_OLD_INODE_SIZE + i_extra_isize
  is->s.base = IFIRST(header)
             = header + sizeof(struct ext4_xattr_ibody_header)
  is->s.end = raw_inode + s_inode_size

In ext4_xattr_set_entry
  min_offs = s->end - s->base
           = s_inode_size - EXT4_GOOD_OLD_INODE_SIZE - i_extra_isize -
	     sizeof(struct ext4_xattr_ibody_header)
  last = s->first
  free = min_offs - ((void *)last - s->base) - sizeof(__u32)
       = s_inode_size - EXT4_GOOD_OLD_INODE_SIZE - i_extra_isize -
         sizeof(struct ext4_xattr_ibody_header) - sizeof(__u32)

In the calculation formula, all values except s_inode_size and
i_extra_size are fixed values. When i_extra_size is the maximum value
s_inode_size - EXT4_GOOD_OLD_INODE_SIZE, min_offs is -4 and free is -8.
The value overflows. As a result, the preceding issue is triggered when
memcpy is executed.

Therefore, when finding xattr or setting xattr, check whether
there is space for storing xattr in the inode to resolve this issue.

Cc: stable@kernel.org
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220616021358.2504451-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/xattr.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -2210,8 +2210,9 @@ int ext4_xattr_ibody_find(struct inode *
 	struct ext4_inode *raw_inode;
 	int error;
 
-	if (EXT4_I(inode)->i_extra_isize == 0)
+	if (!EXT4_INODE_HAS_XATTR_SPACE(inode))
 		return 0;
+
 	raw_inode = ext4_raw_inode(&is->iloc);
 	header = IHDR(inode, raw_inode);
 	is->s.base = is->s.first = IFIRST(header);
@@ -2239,8 +2240,9 @@ int ext4_xattr_ibody_set(handle_t *handl
 	struct ext4_xattr_search *s = &is->s;
 	int error;
 
-	if (EXT4_I(inode)->i_extra_isize == 0)
+	if (!EXT4_INODE_HAS_XATTR_SPACE(inode))
 		return -ENOSPC;
+
 	error = ext4_xattr_set_entry(i, s, handle, inode, false /* is_block */);
 	if (error)
 		return error;

[PATCH 5.4 31/39] udp: Call inet6_destroy_sock() in setsockopt(IPV6_ADDRFORM).

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

commit 21985f43376cee092702d6cb963ff97a9d2ede68 upstream.

Commit 4b340ae20d0e ("IPv6: Complete IPV6_DONTFRAG support") forgot
to add a change to free inet6_sk(sk)->rxpmtu while converting an IPv6
socket into IPv4 with IPV6_ADDRFORM.  After conversion, sk_prot is
changed to udp_prot and ->destroy() never cleans it up, resulting in
a memory leak.

This is due to the discrepancy between inet6_destroy_sock() and
IPV6_ADDRFORM, so let's call inet6_destroy_sock() from IPV6_ADDRFORM
to remove the difference.

However, this is not enough for now because rxpmtu can be changed
without lock_sock() after commit 03485f2adcde ("udpv6: Add lockless
sendmsg() support").  We will fix this case in the following patch.

Note we will rename inet6_destroy_sock() to inet6_cleanup_sock() and
remove unnecessary inet6_destroy_sock() calls in sk_prot->destroy()
in the future.

Fixes: 4b340ae20d0e ("IPv6: Complete IPV6_DONTFRAG support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/ipv6.h       |    1 +
 net/ipv6/af_inet6.c      |    6 ++++++
 net/ipv6/ipv6_sockglue.c |   20 ++++++++------------
 3 files changed, 15 insertions(+), 12 deletions(-)

--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -1100,6 +1100,7 @@ void ipv6_icmp_error(struct sock *sk, st
 void ipv6_local_error(struct sock *sk, int err, struct flowi6 *fl6, u32 info);
 void ipv6_local_rxpmtu(struct sock *sk, struct flowi6 *fl6, u32 mtu);
 
+void inet6_cleanup_sock(struct sock *sk);
 int inet6_release(struct socket *sock);
 int inet6_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len);
 int inet6_getname(struct socket *sock, struct sockaddr *uaddr,
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -498,6 +498,12 @@ void inet6_destroy_sock(struct sock *sk)
 }
 EXPORT_SYMBOL_GPL(inet6_destroy_sock);
 
+void inet6_cleanup_sock(struct sock *sk)
+{
+	inet6_destroy_sock(sk);
+}
+EXPORT_SYMBOL_GPL(inet6_cleanup_sock);
+
 /*
  *	This does both peername and sockname.
  */
--- a/net/ipv6/ipv6_sockglue.c
+++ b/net/ipv6/ipv6_sockglue.c
@@ -176,9 +176,6 @@ static int do_ipv6_setsockopt(struct soc
 		if (optlen < sizeof(int))
 			goto e_inval;
 		if (val == PF_INET) {
-			struct ipv6_txoptions *opt;
-			struct sk_buff *pktopt;
-
 			if (sk->sk_type == SOCK_RAW)
 				break;
 
@@ -209,7 +206,6 @@ static int do_ipv6_setsockopt(struct soc
 				break;
 			}
 
-			fl6_free_socklist(sk);
 			__ipv6_sock_mc_close(sk);
 			__ipv6_sock_ac_close(sk);
 
@@ -244,14 +240,14 @@ static int do_ipv6_setsockopt(struct soc
 				sk->sk_socket->ops = &inet_dgram_ops;
 				sk->sk_family = PF_INET;
 			}
-			opt = xchg((__force struct ipv6_txoptions **)&np->opt,
-				   NULL);
-			if (opt) {
-				atomic_sub(opt->tot_len, &sk->sk_omem_alloc);
-				txopt_put(opt);
-			}
-			pktopt = xchg(&np->pktoptions, NULL);
-			kfree_skb(pktopt);
+
+			/* Disable all options not to allocate memory anymore,
+			 * but there is still a race.  See the lockless path
+			 * in udpv6_sendmsg() and ipv6_local_rxpmtu().
+			 */
+			np->rxopt.all = 0;
+
+			inet6_cleanup_sock(sk);
 
 			/*
 			 * ... and add it to the refcnt debug socks count

[PATCH 5.4 32/39] tcp/udp: Call inet6_destroy_sock() in IPv6 sk->sk_destruct().

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

commit d38afeec26ed4739c640bf286c270559aab2ba5f upstream.

Originally, inet6_sk(sk)->XXX were changed under lock_sock(), so we were
able to clean them up by calling inet6_destroy_sock() during the IPv6 ->
IPv4 conversion by IPV6_ADDRFORM.  However, commit 03485f2adcde ("udpv6:
Add lockless sendmsg() support") added a lockless memory allocation path,
which could cause a memory leak:

setsockopt(IPV6_ADDRFORM)                 sendmsg()
+-----------------------+                 +-------+
- do_ipv6_setsockopt(sk, ...)             - udpv6_sendmsg(sk, ...)
  - sockopt_lock_sock(sk)                   ^._ called via udpv6_prot
    - lock_sock(sk)                             before WRITE_ONCE()
  - WRITE_ONCE(sk->sk_prot, &tcp_prot)
  - inet6_destroy_sock()                    - if (!corkreq)
  - sockopt_release_sock(sk)                  - ip6_make_skb(sk, ...)
    - release_sock(sk)                          ^._ lockless fast path for
                                                    the non-corking case

                                                - __ip6_append_data(sk, ...)
                                                  - ipv6_local_rxpmtu(sk, ...)
                                                    - xchg(&np->rxpmtu, skb)
                                                      ^._ rxpmtu is never freed.

                                                - goto out_no_dst;

                                            - lock_sock(sk)

For now, rxpmtu is only the case, but not to miss the future change
and a similar bug fixed in commit e27326009a3d ("net: ping6: Fix
memleak in ipv6_renew_options()."), let's set a new function to IPv6
sk->sk_destruct() and call inet6_cleanup_sock() there.  Since the
conversion does not change sk->sk_destruct(), we can guarantee that
we can clean up IPv6 resources finally.

We can now remove all inet6_destroy_sock() calls from IPv6 protocol
specific ->destroy() functions, but such changes are invasive to
backport.  So they can be posted as a follow-up later for net-next.

Fixes: 03485f2adcde ("udpv6: Add lockless sendmsg() support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/ipv6.h    |    1 +
 include/net/udp.h     |    2 +-
 include/net/udplite.h |    8 --------
 net/ipv4/udp.c        |    9 ++++++---
 net/ipv4/udplite.c    |    8 ++++++++
 net/ipv6/af_inet6.c   |    8 +++++++-
 net/ipv6/udp.c        |   15 ++++++++++++++-
 net/ipv6/udp_impl.h   |    1 +
 net/ipv6/udplite.c    |    9 ++++++++-
 9 files changed, 46 insertions(+), 15 deletions(-)

--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -1101,6 +1101,7 @@ void ipv6_local_error(struct sock *sk, i
 void ipv6_local_rxpmtu(struct sock *sk, struct flowi6 *fl6, u32 mtu);
 
 void inet6_cleanup_sock(struct sock *sk);
+void inet6_sock_destruct(struct sock *sk);
 int inet6_release(struct socket *sock);
 int inet6_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len);
 int inet6_getname(struct socket *sock, struct sockaddr *uaddr,
--- a/include/net/udp.h
+++ b/include/net/udp.h
@@ -261,7 +261,7 @@ static inline bool udp_sk_bound_dev_eq(s
 }
 
 /* net/ipv4/udp.c */
-void udp_destruct_sock(struct sock *sk);
+void udp_destruct_common(struct sock *sk);
 void skb_consume_udp(struct sock *sk, struct sk_buff *skb, int len);
 int __udp_enqueue_schedule_skb(struct sock *sk, struct sk_buff *skb);
 void udp_skb_destructor(struct sock *sk, struct sk_buff *skb);
--- a/include/net/udplite.h
+++ b/include/net/udplite.h
@@ -24,14 +24,6 @@ static __inline__ int udplite_getfrag(vo
 	return copy_from_iter_full(to, len, &msg->msg_iter) ? 0 : -EFAULT;
 }
 
-/* Designate sk as UDP-Lite socket */
-static inline int udplite_sk_init(struct sock *sk)
-{
-	udp_init_sock(sk);
-	udp_sk(sk)->pcflag = UDPLITE_BIT;
-	return 0;
-}
-
 /*
  * 	Checksumming routines
  */
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1528,7 +1528,7 @@ drop:
 }
 EXPORT_SYMBOL_GPL(__udp_enqueue_schedule_skb);
 
-void udp_destruct_sock(struct sock *sk)
+void udp_destruct_common(struct sock *sk)
 {
 	/* reclaim completely the forward allocated memory */
 	struct udp_sock *up = udp_sk(sk);
@@ -1541,10 +1541,14 @@ void udp_destruct_sock(struct sock *sk)
 		kfree_skb(skb);
 	}
 	udp_rmem_release(sk, total, 0, true);
+}
+EXPORT_SYMBOL_GPL(udp_destruct_common);
 
+static void udp_destruct_sock(struct sock *sk)
+{
+	udp_destruct_common(sk);
 	inet_sock_destruct(sk);
 }
-EXPORT_SYMBOL_GPL(udp_destruct_sock);
 
 int udp_init_sock(struct sock *sk)
 {
@@ -1552,7 +1556,6 @@ int udp_init_sock(struct sock *sk)
 	sk->sk_destruct = udp_destruct_sock;
 	return 0;
 }
-EXPORT_SYMBOL_GPL(udp_init_sock);
 
 void skb_consume_udp(struct sock *sk, struct sk_buff *skb, int len)
 {
--- a/net/ipv4/udplite.c
+++ b/net/ipv4/udplite.c
@@ -17,6 +17,14 @@
 struct udp_table 	udplite_table __read_mostly;
 EXPORT_SYMBOL(udplite_table);
 
+/* Designate sk as UDP-Lite socket */
+static int udplite_sk_init(struct sock *sk)
+{
+	udp_init_sock(sk);
+	udp_sk(sk)->pcflag = UDPLITE_BIT;
+	return 0;
+}
+
 static int udplite_rcv(struct sk_buff *skb)
 {
 	return __udp4_lib_rcv(skb, &udplite_table, IPPROTO_UDPLITE);
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -104,6 +104,12 @@ static __inline__ struct ipv6_pinfo *ine
 	return (struct ipv6_pinfo *)(((u8 *)sk) + offset);
 }
 
+void inet6_sock_destruct(struct sock *sk)
+{
+	inet6_cleanup_sock(sk);
+	inet_sock_destruct(sk);
+}
+
 static int inet6_create(struct net *net, struct socket *sock, int protocol,
 			int kern)
 {
@@ -196,7 +202,7 @@ lookup_protocol:
 			inet->hdrincl = 1;
 	}
 
-	sk->sk_destruct		= inet_sock_destruct;
+	sk->sk_destruct		= inet6_sock_destruct;
 	sk->sk_family		= PF_INET6;
 	sk->sk_protocol		= protocol;
 
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -54,6 +54,19 @@
 #include <trace/events/skb.h>
 #include "udp_impl.h"
 
+static void udpv6_destruct_sock(struct sock *sk)
+{
+	udp_destruct_common(sk);
+	inet6_sock_destruct(sk);
+}
+
+int udpv6_init_sock(struct sock *sk)
+{
+	skb_queue_head_init(&udp_sk(sk)->reader_queue);
+	sk->sk_destruct = udpv6_destruct_sock;
+	return 0;
+}
+
 static u32 udp6_ehashfn(const struct net *net,
 			const struct in6_addr *laddr,
 			const u16 lport,
@@ -1665,7 +1678,7 @@ struct proto udpv6_prot = {
 	.connect		= ip6_datagram_connect,
 	.disconnect		= udp_disconnect,
 	.ioctl			= udp_ioctl,
-	.init			= udp_init_sock,
+	.init			= udpv6_init_sock,
 	.destroy		= udpv6_destroy_sock,
 	.setsockopt		= udpv6_setsockopt,
 	.getsockopt		= udpv6_getsockopt,
--- a/net/ipv6/udp_impl.h
+++ b/net/ipv6/udp_impl.h
@@ -12,6 +12,7 @@ int __udp6_lib_rcv(struct sk_buff *, str
 int __udp6_lib_err(struct sk_buff *, struct inet6_skb_parm *, u8, u8, int,
 		   __be32, struct udp_table *);
 
+int udpv6_init_sock(struct sock *sk);
 int udp_v6_get_port(struct sock *sk, unsigned short snum);
 void udp_v6_rehash(struct sock *sk);
 
--- a/net/ipv6/udplite.c
+++ b/net/ipv6/udplite.c
@@ -12,6 +12,13 @@
 #include <linux/proc_fs.h>
 #include "udp_impl.h"
 
+static int udplitev6_sk_init(struct sock *sk)
+{
+	udpv6_init_sock(sk);
+	udp_sk(sk)->pcflag = UDPLITE_BIT;
+	return 0;
+}
+
 static int udplitev6_rcv(struct sk_buff *skb)
 {
 	return __udp6_lib_rcv(skb, &udplite_table, IPPROTO_UDPLITE);
@@ -38,7 +45,7 @@ struct proto udplitev6_prot = {
 	.connect	   = ip6_datagram_connect,
 	.disconnect	   = udp_disconnect,
 	.ioctl		   = udp_ioctl,
-	.init		   = udplite_sk_init,
+	.init		   = udplitev6_sk_init,
 	.destroy	   = udpv6_destroy_sock,
 	.setsockopt	   = udpv6_setsockopt,
 	.getsockopt	   = udpv6_getsockopt,

[PATCH 5.4 33/39] inet6: Remove inet6_destroy_sock() in sk->sk_prot->destroy().

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

commit b5fc29233d28be7a3322848ebe73ac327559cdb9 upstream.

After commit d38afeec26ed ("tcp/udp: Call inet6_destroy_sock()
in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in
sk->sk_destruct() by setting inet6_sock_destruct() to it to make
sure we do not leak inet6-specific resources.

Now we can remove unnecessary inet6_destroy_sock() calls in
sk->sk_prot->destroy().

DCCP and SCTP have their own sk->sk_destruct() function, so we
change them separately in the following patches.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ping.c     |    6 ------
 net/ipv6/raw.c      |    2 --
 net/ipv6/tcp_ipv6.c |    8 +-------
 net/ipv6/udp.c      |    2 --
 net/l2tp/l2tp_ip6.c |    2 --
 5 files changed, 1 insertion(+), 19 deletions(-)

--- a/net/ipv6/ping.c
+++ b/net/ipv6/ping.c
@@ -22,11 +22,6 @@
 #include <linux/proc_fs.h>
 #include <net/ping.h>
 
-static void ping_v6_destroy(struct sock *sk)
-{
-	inet6_destroy_sock(sk);
-}
-
 /* Compatibility glue so we can support IPv6 when it's compiled as a module */
 static int dummy_ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len,
 				 int *addr_len)
@@ -170,7 +165,6 @@ struct proto pingv6_prot = {
 	.owner =	THIS_MODULE,
 	.init =		ping_init_sock,
 	.close =	ping_close,
-	.destroy =	ping_v6_destroy,
 	.connect =	ip6_datagram_connect_v6_only,
 	.disconnect =	__udp_disconnect,
 	.setsockopt =	ipv6_setsockopt,
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -1256,8 +1256,6 @@ static void raw6_destroy(struct sock *sk
 	lock_sock(sk);
 	ip6_flush_pending_frames(sk);
 	release_sock(sk);
-
-	inet6_destroy_sock(sk);
 }
 
 static int rawv6_init_sk(struct sock *sk)
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -1848,12 +1848,6 @@ static int tcp_v6_init_sock(struct sock
 	return 0;
 }
 
-static void tcp_v6_destroy_sock(struct sock *sk)
-{
-	tcp_v4_destroy_sock(sk);
-	inet6_destroy_sock(sk);
-}
-
 #ifdef CONFIG_PROC_FS
 /* Proc filesystem TCPv6 sock list dumping. */
 static void get_openreq6(struct seq_file *seq,
@@ -2046,7 +2040,7 @@ struct proto tcpv6_prot = {
 	.accept			= inet_csk_accept,
 	.ioctl			= tcp_ioctl,
 	.init			= tcp_v6_init_sock,
-	.destroy		= tcp_v6_destroy_sock,
+	.destroy		= tcp_v4_destroy_sock,
 	.shutdown		= tcp_shutdown,
 	.setsockopt		= tcp_setsockopt,
 	.getsockopt		= tcp_getsockopt,
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -1573,8 +1573,6 @@ void udpv6_destroy_sock(struct sock *sk)
 			udp_encap_disable();
 		}
 	}
-
-	inet6_destroy_sock(sk);
 }
 
 /*
--- a/net/l2tp/l2tp_ip6.c
+++ b/net/l2tp/l2tp_ip6.c
@@ -268,8 +268,6 @@ static void l2tp_ip6_destroy_sock(struct
 
 	if (tunnel)
 		l2tp_tunnel_delete(tunnel);
-
-	inet6_destroy_sock(sk);
 }
 
 static int l2tp_ip6_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len)

[PATCH 5.4 34/39] dccp: Call inet6_destroy_sock() via sk->sk_destruct().

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

commit 1651951ebea54970e0bda60c638fc2eee7a6218f upstream.

After commit d38afeec26ed ("tcp/udp: Call inet6_destroy_sock()
in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in
sk->sk_destruct() by setting inet6_sock_destruct() to it to make
sure we do not leak inet6-specific resources.

DCCP sets its own sk->sk_destruct() in the dccp_init_sock(), and
DCCPv6 socket shares it by calling the same init function via
dccp_v6_init_sock().

To call inet6_sock_destruct() from DCCPv6 sk->sk_destruct(), we
export it and set dccp_v6_sk_destruct() in the init function.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/dccp/dccp.h     |    1 +
 net/dccp/ipv6.c     |   15 ++++++++-------
 net/dccp/proto.c    |    8 +++++++-
 net/ipv6/af_inet6.c |    1 +
 4 files changed, 17 insertions(+), 8 deletions(-)

--- a/net/dccp/dccp.h
+++ b/net/dccp/dccp.h
@@ -288,6 +288,7 @@ int dccp_rcv_state_process(struct sock *
 int dccp_rcv_established(struct sock *sk, struct sk_buff *skb,
 			 const struct dccp_hdr *dh, const unsigned int len);
 
+void dccp_destruct_common(struct sock *sk);
 int dccp_init_sock(struct sock *sk, const __u8 ctl_sock_initialized);
 void dccp_destroy_sock(struct sock *sk);
 
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -1000,6 +1000,12 @@ static const struct inet_connection_sock
 #endif
 };
 
+static void dccp_v6_sk_destruct(struct sock *sk)
+{
+	dccp_destruct_common(sk);
+	inet6_sock_destruct(sk);
+}
+
 /* NOTE: A lot of things set to zero explicitly by call to
  *       sk_alloc() so need not be done here.
  */
@@ -1012,17 +1018,12 @@ static int dccp_v6_init_sock(struct sock
 		if (unlikely(!dccp_v6_ctl_sock_initialized))
 			dccp_v6_ctl_sock_initialized = 1;
 		inet_csk(sk)->icsk_af_ops = &dccp_ipv6_af_ops;
+		sk->sk_destruct = dccp_v6_sk_destruct;
 	}
 
 	return err;
 }
 
-static void dccp_v6_destroy_sock(struct sock *sk)
-{
-	dccp_destroy_sock(sk);
-	inet6_destroy_sock(sk);
-}
-
 static struct timewait_sock_ops dccp6_timewait_sock_ops = {
 	.twsk_obj_size	= sizeof(struct dccp6_timewait_sock),
 };
@@ -1045,7 +1046,7 @@ static struct proto dccp_v6_prot = {
 	.accept		   = inet_csk_accept,
 	.get_port	   = inet_csk_get_port,
 	.shutdown	   = dccp_shutdown,
-	.destroy	   = dccp_v6_destroy_sock,
+	.destroy	   = dccp_destroy_sock,
 	.orphan_count	   = &dccp_orphan_count,
 	.max_header	   = MAX_DCCP_HEADER,
 	.obj_size	   = sizeof(struct dccp6_sock),
--- a/net/dccp/proto.c
+++ b/net/dccp/proto.c
@@ -171,12 +171,18 @@ const char *dccp_packet_name(const int t
 
 EXPORT_SYMBOL_GPL(dccp_packet_name);
 
-static void dccp_sk_destruct(struct sock *sk)
+void dccp_destruct_common(struct sock *sk)
 {
 	struct dccp_sock *dp = dccp_sk(sk);
 
 	ccid_hc_tx_delete(dp->dccps_hc_tx_ccid, sk);
 	dp->dccps_hc_tx_ccid = NULL;
+}
+EXPORT_SYMBOL_GPL(dccp_destruct_common);
+
+static void dccp_sk_destruct(struct sock *sk)
+{
+	dccp_destruct_common(sk);
 	inet_sock_destruct(sk);
 }
 
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -109,6 +109,7 @@ void inet6_sock_destruct(struct sock *sk
 	inet6_cleanup_sock(sk);
 	inet_sock_destruct(sk);
 }
+EXPORT_SYMBOL_GPL(inet6_sock_destruct);
 
 static int inet6_create(struct net *net, struct socket *sock, int protocol,
 			int kern)

[PATCH 5.4 35/39] sctp: Call inet6_destroy_sock() via sk->sk_destruct().

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

commit 6431b0f6ff1633ae598667e4cdd93830074a03e8 upstream.

After commit d38afeec26ed ("tcp/udp: Call inet6_destroy_sock()
in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in
sk->sk_destruct() by setting inet6_sock_destruct() to it to make
sure we do not leak inet6-specific resources.

SCTP sets its own sk->sk_destruct() in the sctp_init_sock(), and
SCTPv6 socket reuses it as the init function.

To call inet6_sock_destruct() from SCTPv6 sk->sk_destruct(), we
set sctp_v6_destruct_sock() in a new init function.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sctp/socket.c |   29 +++++++++++++++++++++--------
 1 file changed, 21 insertions(+), 8 deletions(-)

--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -5167,13 +5167,17 @@ static void sctp_destroy_sock(struct soc
 }
 
 /* Triggered when there are no references on the socket anymore */
-static void sctp_destruct_sock(struct sock *sk)
+static void sctp_destruct_common(struct sock *sk)
 {
 	struct sctp_sock *sp = sctp_sk(sk);
 
 	/* Free up the HMAC transform. */
 	crypto_free_shash(sp->hmac);
+}
 
+static void sctp_destruct_sock(struct sock *sk)
+{
+	sctp_destruct_common(sk);
 	inet_sock_destruct(sk);
 }
 
@@ -9308,7 +9312,7 @@ void sctp_copy_sock(struct sock *newsk,
 	sctp_sk(newsk)->reuse = sp->reuse;
 
 	newsk->sk_shutdown = sk->sk_shutdown;
-	newsk->sk_destruct = sctp_destruct_sock;
+	newsk->sk_destruct = sk->sk_destruct;
 	newsk->sk_family = sk->sk_family;
 	newsk->sk_protocol = IPPROTO_SCTP;
 	newsk->sk_backlog_rcv = sk->sk_prot->backlog_rcv;
@@ -9539,11 +9543,20 @@ struct proto sctp_prot = {
 
 #if IS_ENABLED(CONFIG_IPV6)
 
-#include <net/transp_v6.h>
-static void sctp_v6_destroy_sock(struct sock *sk)
+static void sctp_v6_destruct_sock(struct sock *sk)
+{
+	sctp_destruct_common(sk);
+	inet6_sock_destruct(sk);
+}
+
+static int sctp_v6_init_sock(struct sock *sk)
 {
-	sctp_destroy_sock(sk);
-	inet6_destroy_sock(sk);
+	int ret = sctp_init_sock(sk);
+
+	if (!ret)
+		sk->sk_destruct = sctp_v6_destruct_sock;
+
+	return ret;
 }
 
 struct proto sctpv6_prot = {
@@ -9553,8 +9566,8 @@ struct proto sctpv6_prot = {
 	.disconnect	= sctp_disconnect,
 	.accept		= sctp_accept,
 	.ioctl		= sctp_ioctl,
-	.init		= sctp_init_sock,
-	.destroy	= sctp_v6_destroy_sock,
+	.init		= sctp_v6_init_sock,
+	.destroy	= sctp_destroy_sock,
 	.shutdown	= sctp_shutdown,
 	.setsockopt	= sctp_setsockopt,
 	.getsockopt	= sctp_getsockopt,

[PATCH 5.4 36/39] xfs: fix forkoff miscalculation related to XFS_LITINO(mp)

[Greg Kroah-Hartman]

From: Gao Xiang <hsiangkao@redhat.com>

commit ada49d64fb3538144192181db05de17e2ffc3551 upstream.

Currently, commit e9e2eae89ddb dropped a (int) decoration from
XFS_LITINO(mp), and since sizeof() expression is also involved,
the result of XFS_LITINO(mp) is simply as the size_t type
(commonly unsigned long).

Considering the expression in xfs_attr_shortform_bytesfit():
  offset = (XFS_LITINO(mp) - bytes) >> 3;
let "bytes" be (int)340, and
    "XFS_LITINO(mp)" be (unsigned long)336.

on 64-bit platform, the expression is
  offset = ((unsigned long)336 - (int)340) >> 3 =
           (int)(0xfffffffffffffffcUL >> 3) = -1

but on 32-bit platform, the expression is
  offset = ((unsigned long)336 - (int)340) >> 3 =
           (int)(0xfffffffcUL >> 3) = 0x1fffffff
instead.

so offset becomes a large positive number on 32-bit platform, and
cause xfs_attr_shortform_bytesfit() returns maxforkoff rather than 0.

Therefore, one result is
  "ASSERT(new_size <= XFS_IFORK_SIZE(ip, whichfork));"

assertion failure in xfs_idata_realloc(), which was also the root
cause of the original bugreport from Dennis, see:
   https://bugzilla.redhat.com/show_bug.cgi?id=1894177

And it can also be manually triggered with the following commands:
  $ touch a;
  $ setfattr -n user.0 -v "`seq 0 80`" a;
  $ setfattr -n user.1 -v "`seq 0 80`" a

on 32-bit platform.

Fix the case in xfs_attr_shortform_bytesfit() by bailing out
"XFS_LITINO(mp) < bytes" in advance suggested by Eric and a misleading
comment together with this bugfix suggested by Darrick. It seems the
other users of XFS_LITINO(mp) are not impacted.

Fixes: e9e2eae89ddb ("xfs: only check the superblock version for dinode size calculation")
Cc: <stable@vger.kernel.org> # 5.7+
Reported-and-tested-by: Dennis Gilmore <dgilmore@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Chandan Babu R <chandan.babu@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/xfs/libxfs/xfs_attr_leaf.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/fs/xfs/libxfs/xfs_attr_leaf.c
+++ b/fs/xfs/libxfs/xfs_attr_leaf.c
@@ -435,7 +435,7 @@ xfs_attr_copy_value(
  *========================================================================*/
 
 /*
- * Query whether the requested number of additional bytes of extended
+ * Query whether the total requested number of attr fork bytes of extended
  * attribute space will be able to fit inline.
  *
  * Returns zero if not, else the di_forkoff fork offset to be used in the
@@ -455,6 +455,12 @@ xfs_attr_shortform_bytesfit(
 	int			maxforkoff;
 	int			offset;
 
+	/*
+	 * Check if the new size could fit at all first:
+	 */
+	if (bytes > XFS_LITINO(mp))
+		return 0;
+
 	/* rounded down */
 	offset = (XFS_LITINO(mp) - bytes) >> 3;
 

[PATCH 5.4 37/39] pwm: meson: Explicitly set .polarity in .get_state()

[Greg Kroah-Hartman]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

commit 8caa81eb950cb2e9d2d6959b37d853162d197f57 upstream.

The driver only supports normal polarity. Complete the implementation of
.get_state() by setting .polarity accordingly.

This fixes a regression that was possible since commit c73a3107624d
("pwm: Handle .get_state() failures") which stopped to zero-initialize
the state passed to the .get_state() callback. This was reported at
https://forum.odroid.com/viewtopic.php?f=177&t=46360 . While this was an
unintended side effect, the real issue is the driver's callback not
setting the polarity.

There is a complicating fact, that the .apply() callback fakes support
for inversed polarity. This is not (and cannot) be matched by
.get_state(). As fixing this isn't easy, only point it out in a comment
to prevent authors of other drivers from copying that approach.

Fixes: c375bcbaabdb ("pwm: meson: Read the full hardware state in meson_pwm_get_state()")
Reported-by: Munehisa Kamata <kamatam@amazon.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230310191405.2606296-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pwm/pwm-meson.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -168,6 +168,12 @@ static int meson_pwm_calc(struct meson_p
 	duty = state->duty_cycle;
 	period = state->period;
 
+	/*
+	 * Note this is wrong. The result is an output wave that isn't really
+	 * inverted and so is wrongly identified by .get_state as normal.
+	 * Fixing this needs some care however as some machines might rely on
+	 * this.
+	 */
 	if (state->polarity == PWM_POLARITY_INVERSED)
 		duty = period - duty;
 
@@ -366,6 +372,7 @@ static void meson_pwm_get_state(struct p
 		state->period = 0;
 		state->duty_cycle = 0;
 	}
+	state->polarity = PWM_POLARITY_NORMAL;
 }
 
 static const struct pwm_ops meson_pwm_ops = {

[PATCH 5.4 38/39] iio: adc: at91-sama5d2_adc: fix an error code in at91_adc_allocate_trigger()

[Greg Kroah-Hartman]

From: Dan Carpenter <error27@gmail.com>

commit 73a428b37b9b538f8f8fe61caa45e7f243bab87c upstream.

The at91_adc_allocate_trigger() function is supposed to return error
pointers.  Returning a NULL will cause an Oops.

Fixes: 5e1a1da0f8c9 ("iio: adc: at91-sama5d2_adc: add hw trigger and buffer support")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/5d728f9d-31d1-410d-a0b3-df6a63a2c8ba@kili.mountain
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/adc/at91-sama5d2_adc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iio/adc/at91-sama5d2_adc.c
+++ b/drivers/iio/adc/at91-sama5d2_adc.c
@@ -983,7 +983,7 @@ static struct iio_trigger *at91_adc_allo
 	trig = devm_iio_trigger_alloc(&indio->dev, "%s-dev%d-%s", indio->name,
 				      indio->id, trigger_name);
 	if (!trig)
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 
 	trig->dev.parent = indio->dev.parent;
 	iio_trigger_set_drvdata(trig, indio);

[PATCH 5.4 39/39] ASN.1: Fix check for strdup() success

[Greg Kroah-Hartman]

From: Ekaterina Orlova <vorobushek.ok@gmail.com>

commit 5a43001c01691dcbd396541e6faa2c0077378f48 upstream.

It seems there is a misprint in the check of strdup() return code that
can lead to NULL pointer dereference.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 4520c6a49af8 ("X.509: Add simple ASN.1 grammar compiler")
Signed-off-by: Ekaterina Orlova <vorobushek.ok@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: keyrings@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Link: https://lore.kernel.org/r/20230315172130.140-1-vorobushek.ok@gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 scripts/asn1_compiler.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/scripts/asn1_compiler.c
+++ b/scripts/asn1_compiler.c
@@ -625,7 +625,7 @@ int main(int argc, char **argv)
 	p = strrchr(argv[1], '/');
 	p = p ? p + 1 : argv[1];
 	grammar_name = strdup(p);
-	if (!p) {
+	if (!grammar_name) {
 		perror(NULL);
 		exit(1);
 	}

Re: [PATCH 5.4 00/39] 5.4.242-rc1 review

[Guenter Roeck]

On Mon, Apr 24, 2023 at 03:17:03PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.242 release.
> There are 39 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 26 Apr 2023 13:11:11 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 159 pass: 159 fail: 0
Qemu test results:
	total: 455 pass: 455 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 5.4 00/39] 5.4.242-rc1 review

[Naresh Kamboju]

On Mon, 24 Apr 2023 at 14:22, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.4.242 release.
> There are 39 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 26 Apr 2023 13:11:11 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.242-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h


Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

NOTE:
----
FYI, This is not a show stopper but worth reporting.

As I reported on stable rc 4.19 kernel,

Following kernel warning notices on stable rc 5.4.242-rc1 from the
previous releases 5.4.238-rc1 noticed on arm64, i386 and x86_64.
After this kernel warning, the system is still stable and up and running.

This kernel is built with kselftest ftrace merge configs with all
required Kconfigs.

[    3.273073] WARNING: CPU: 1 PID: 0 at
include/trace/events/lock.h:13 lock_acquire+0x142/0x150
[    3.273847] WARNING: CPU: 0 PID: 0 at
include/trace/events/lock.h:58 lock_release+0x1d7/0x260
[    3.273847] Modules linked in:
[    3.273073] Modules linked in:
[    3.273847] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.242-rc1 #1
[    3.273073] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.4.242-rc1 #1
[    3.273847] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS
2.0b 07/27/2017
[    3.273847] RIP: 0010:lock_release+0x1d7/0x260
[    3.273073] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS
2.0b 07/27/2017
[    3.273073] RIP: 0010:lock_acquire+0x142/0x150

log:
- https://lkft.validation.linaro.org/scheduler/job/6288834#L860
- https://lkft.validation.linaro.org/scheduler/job/6373719#L867

## Build
* kernel: 5.4.242-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.4.y
* git commit: 00161130fc2321eeea08f3a2ffacfa653e685d5a
* git describe: v5.4.238-239-g00161130fc23
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.4.y/build/v5.4.238-239-g00161130fc23

## Test Regressions (compared to v5.4.238-199-g230f1bde44b6)

## Metric Regressions (compared to v5.4.238-199-g230f1bde44b6)

## Test Fixes (compared to v5.4.238-199-g230f1bde44b6)

## Metric Fixes (compared to v5.4.238-199-g230f1bde44b6)

## Test result summary
total: 135130, pass: 109048, fail: 3400, skip: 22432, xfail: 250

## Build Summary
* arc: 5 total, 5 passed, 0 failed
* arm: 143 total, 142 passed, 1 failed
* arm64: 43 total, 39 passed, 4 failed
* i386: 26 total, 20 passed, 6 failed
* mips: 27 total, 27 passed, 0 failed
* parisc: 6 total, 6 passed, 0 failed
* powerpc: 30 total, 30 passed, 0 failed
* riscv: 12 total, 10 passed, 2 failed
* s390: 6 total, 6 passed, 0 failed
* sh: 12 total, 12 passed, 0 failed
* sparc: 6 total, 6 passed, 0 failed
* x86_64: 36 total, 34 passed, 2 failed

## Test suites summary
* boot
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers-dma-buf
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-firmware
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-net-forwarding
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* perf
* rcutorture
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.4 00/39] 5.4.242-rc1 review

[Harshit Mogalapalli]

Hi Greg,

On 24/04/23 6:47 pm, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.242 release.
> There are 39 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 26 Apr 2023 13:11:11 +0000.
> Anything received after that time might be too late.
> 

No problems seen on x86_64 and aarch64.

Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>

Thanks,
Harshit
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.242-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

Re: [PATCH 5.4 00/39] 5.4.242-rc1 review

[Florian Fainelli]

On 4/24/2023 6:17 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.242 release.
> There are 39 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 26 Apr 2023 13:11:11 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.242-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on 
BMIPS_GENERIC:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 5.4 00/39] 5.4.242-rc1 review

[Shuah Khan]

On 4/24/23 07:17, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.242 release.
> There are 39 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 26 Apr 2023 13:11:11 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.242-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah