[PATCH 6.2 07/15] gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xNU

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

From: Werner Sembach <wse@tuxedocomputers.com>

commit 782eea0c89f7d071d6b56ecfa1b8b0c81164b9be upstream.

commit 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
changed the policy such that I2C touchpads may be able to wake up the
system by default if the system is configured as such.

However on Clevo NL5xNU there is a mistake in the ACPI tables that the
TP_ATTN# signal connected to GPIO 9 is configured as ActiveLow and level
triggered but connected to a pull up. As soon as the system suspends the
touchpad loses power and then the system wakes up.

To avoid this problem, introduce a quirk for this model that will prevent
the wakeup capability for being set for GPIO 9.

This patch is analoge to a very similar patch for NL5xRU, just the DMI
string changed.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpio/gpiolib-acpi.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -1634,6 +1634,19 @@ static const struct dmi_system_id gpioli
 		 * https://gitlab.freedesktop.org/drm/amd/-/issues/1722#note_1720627
 		 */
 		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "NL5xNU"),
+		},
+		.driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+			.ignore_wake = "ELAN0415:00@9",
+		},
+	},
+	{
+		/*
+		 * Spurious wakeups from TP_ATTN# pin
+		 * Found in BIOS 1.7.8
+		 * https://gitlab.freedesktop.org/drm/amd/-/issues/1722#note_1720627
+		 */
+		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
 		},
 		.driver_data = &(struct acpi_gpiolib_dmi_quirk) {