From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
patches@lists.linux.dev, "Arınç ÜNAL" <arinc.unal@arinc9.com>,
"Johan Hovold" <johan@kernel.org>
Subject: [PATCH 6.1 12/16] USB: serial: option: add UNISOC vendor and TOZED LT70C product
Date: Fri, 28 Apr 2023 13:28:04 +0200 [thread overview]
Message-ID: <20230428112040.464288193@linuxfoundation.org> (raw)
In-Reply-To: <20230428112040.063291126@linuxfoundation.org>
From: Arınç ÜNAL <arinc.unal@arinc9.com>
commit a095edfc15f0832e046ae23964e249ef5c95af87 upstream.
Add UNISOC vendor ID and TOZED LT70-C modem which is based from UNISOC
SL8563. The modem supports the NCM mode. Interface 0 is used for running
the AT commands. Interface 12 is the ADB interface.
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1782 ProdID=4055 Rev=04.04
S: Manufacturer=Unisoc Phone
S: Product=Unisoc Phone
S: SerialNumber=<redacted>
C: #Ifs=14 Cfg#= 1 Atr=c0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm
E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#=10 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#=11 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#=12 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#=13 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm
E: Ad=84(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 3 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm
E: Ad=86(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 6 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm
E: Ad=88(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 7 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230417152003.243248-1-arinc.unal@arinc9.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -595,6 +595,11 @@ static void option_instat_callback(struc
#define SIERRA_VENDOR_ID 0x1199
#define SIERRA_PRODUCT_EM9191 0x90d3
+/* UNISOC (Spreadtrum) products */
+#define UNISOC_VENDOR_ID 0x1782
+/* TOZED LT70-C based on UNISOC SL8563 uses UNISOC's vendor ID */
+#define TOZED_PRODUCT_LT70C 0x4055
+
/* Device flags */
/* Highest interface number which can be used with NCTRL() and RSVD() */
@@ -2225,6 +2230,7 @@ static const struct usb_device_id option
{ USB_DEVICE_AND_INTERFACE_INFO(OPPO_VENDOR_ID, OPPO_PRODUCT_R11, 0xff, 0xff, 0x30) },
{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x30) },
{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0, 0) },
+ { USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, TOZED_PRODUCT_LT70C, 0xff, 0, 0) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
next prev parent reply other threads:[~2023-04-28 11:29 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-28 11:27 [PATCH 6.1 00/16] 6.1.27-rc1 review Greg Kroah-Hartman
2023-04-28 11:27 ` [PATCH 6.1 01/16] um: Only disable SSE on clang to work around old GCC bugs Greg Kroah-Hartman
2023-04-28 11:27 ` [PATCH 6.1 02/16] phy: phy-brcm-usb: Utilize platform_get_irq_byname_optional() Greg Kroah-Hartman
2023-04-28 11:27 ` [PATCH 6.1 03/16] KVM: arm64: Retry fault if vma_lookup() results become invalid Greg Kroah-Hartman
2023-04-28 11:27 ` [PATCH 6.1 04/16] mm/mempolicy: fix use-after-free of VMA iterator Greg Kroah-Hartman
2023-04-28 11:27 ` [PATCH 6.1 05/16] mptcp: stops worker on unaccepted sockets at listener close Greg Kroah-Hartman
2023-04-28 11:27 ` [PATCH 6.1 06/16] mptcp: fix accept vs worker race Greg Kroah-Hartman
2023-04-28 11:27 ` [PATCH 6.1 07/16] wifi: brcmfmac: slab-out-of-bounds read in brcmf_get_assoc_ies() Greg Kroah-Hartman
2023-04-28 11:28 ` [PATCH 6.1 08/16] drm/fb-helper: set x/yres_virtual in drm_fb_helper_check_var Greg Kroah-Hartman
2023-04-28 11:28 ` [PATCH 6.1 09/16] gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xNU Greg Kroah-Hartman
2023-04-28 11:28 ` [PATCH 6.1 10/16] bluetooth: Perform careful capability checks in hci_sock_ioctl() Greg Kroah-Hartman
2023-04-28 11:28 ` [PATCH 6.1 11/16] btrfs: fix uninitialized variable warnings Greg Kroah-Hartman
2023-04-28 11:28 ` Greg Kroah-Hartman [this message]
2023-04-28 11:28 ` [PATCH 6.1 13/16] driver core: Dont require dynamic_debug for initcall_debug probe timing Greg Kroah-Hartman
2023-04-28 11:28 ` [PATCH 6.1 14/16] riscv: Move early dtb mapping into the fixmap region Greg Kroah-Hartman
2023-04-28 11:28 ` [PATCH 6.1 15/16] riscv: Do not set initial_boot_params to the linear address of the dtb Greg Kroah-Hartman
2023-04-28 11:28 ` [PATCH 6.1 16/16] riscv: No need to relocate the dtb as it lies in the fixmap region Greg Kroah-Hartman
2023-04-28 14:35 ` [PATCH 6.1 00/16] 6.1.27-rc1 review Markus Reichelt
2023-04-28 22:06 ` Naresh Kamboju
2023-04-28 22:29 ` Shuah Khan
2023-04-29 4:11 ` Guenter Roeck
2023-04-29 6:08 ` Ron Economos
2023-04-29 7:43 ` Bagas Sanjaya
2023-04-29 9:54 ` Conor Dooley
2023-04-29 9:56 ` ogasawara takeshi
2023-04-29 17:14 ` Florian Fainelli
2023-05-02 5:39 ` Chris Paterson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230428112040.464288193@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=arinc.unal@arinc9.com \
--cc=johan@kernel.org \
--cc=patches@lists.linux.dev \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).