From: <gregkh@linuxfoundation.org>
To: Takahiro.Kuwano@infineon.com, tudor.ambarus@linaro.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] mtd: spi-nor: spansion: Enable JFFS2 write buffer for" failed to apply to 6.3-stable tree
Date: Sun, 07 May 2023 12:53:24 +0200 [thread overview]
Message-ID: <2023050724-lapped-bunkbed-43a4@gregkh> (raw)
The patch below does not apply to the 6.3-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.3.y
git checkout FETCH_HEAD
git cherry-pick -x 9fd0945fe6fadfb6b54a9cd73be101c02b3e8134
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2023050724-lapped-bunkbed-43a4@gregkh' --subject-prefix 'PATCH 6.3.y' HEAD^..
Possible dependencies:
9fd0945fe6fa ("mtd: spi-nor: spansion: Enable JFFS2 write buffer for Infineon s28hx SEMPER flash")
4eddee70140b ("mtd: spi-nor: Add a RWW flag")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 9fd0945fe6fadfb6b54a9cd73be101c02b3e8134 Mon Sep 17 00:00:00 2001
From: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Date: Thu, 6 Apr 2023 15:17:44 +0900
Subject: [PATCH] mtd: spi-nor: spansion: Enable JFFS2 write buffer for
Infineon s28hx SEMPER flash
Infineon(Cypress) SEMPER NOR flash family has on-die ECC and its program
granularity is 16-byte ECC data unit size. JFFS2 supports write buffer
mode for ECC'd NOR flash. Provide a way to clear the MTD_BIT_WRITEABLE
flag in order to enable JFFS2 write buffer mode support.
A new SNOR_F_ECC flag is introduced to determine if the part has on-die
ECC and if it has, MTD_BIT_WRITEABLE is unset.
In vendor specific driver, a common cypress_nor_ecc_init() helper is
added. This helper takes care for ECC related initialization for SEMPER
flash family by setting up params->writesize and SNOR_F_ECC.
Fixes: c3266af101f2 ("mtd: spi-nor: spansion: add support for Cypress Semper flash")
Suggested-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/d586723f6f12aaff44fbcd7b51e674b47ed554ed.1680760742.git.Takahiro.Kuwano@infineon.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 1e30737b607b..143ca3c9b477 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -3407,6 +3407,9 @@ static void spi_nor_set_mtd_info(struct spi_nor *nor)
mtd->name = dev_name(dev);
mtd->type = MTD_NORFLASH;
mtd->flags = MTD_CAP_NORFLASH;
+ /* Unset BIT_WRITEABLE to enable JFFS2 write buffer for ECC'd NOR */
+ if (nor->flags & SNOR_F_ECC)
+ mtd->flags &= ~MTD_BIT_WRITEABLE;
if (nor->info->flags & SPI_NOR_NO_ERASE)
mtd->flags |= MTD_NO_ERASE;
else
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index ea9033cb0a01..8cfa82ed06c7 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -131,6 +131,7 @@ enum spi_nor_option_flags {
SNOR_F_SOFT_RESET = BIT(12),
SNOR_F_SWP_IS_VOLATILE = BIT(13),
SNOR_F_RWW = BIT(14),
+ SNOR_F_ECC = BIT(15),
};
struct spi_nor_read_command {
diff --git a/drivers/mtd/spi-nor/debugfs.c b/drivers/mtd/spi-nor/debugfs.c
index e200f5b9234c..082c0c5a8626 100644
--- a/drivers/mtd/spi-nor/debugfs.c
+++ b/drivers/mtd/spi-nor/debugfs.c
@@ -26,6 +26,7 @@ static const char *const snor_f_names[] = {
SNOR_F_NAME(SOFT_RESET),
SNOR_F_NAME(SWP_IS_VOLATILE),
SNOR_F_NAME(RWW),
+ SNOR_F_NAME(ECC),
};
#undef SNOR_F_NAME
diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 352c40dd3864..19b1436f36ea 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -332,6 +332,17 @@ static int cypress_nor_set_page_size(struct spi_nor *nor)
return 0;
}
+static void cypress_nor_ecc_init(struct spi_nor *nor)
+{
+ /*
+ * Programming is supported only in 16-byte ECC data unit granularity.
+ * Byte-programming, bit-walking, or multiple program operations to the
+ * same ECC data unit without an erase are not allowed.
+ */
+ nor->params->writesize = 16;
+ nor->flags |= SNOR_F_ECC;
+}
+
static int
s25fs256t_post_bfpt_fixup(struct spi_nor *nor,
const struct sfdp_parameter_header *bfpt_header,
@@ -506,7 +517,7 @@ static int s28hx_t_post_bfpt_fixup(struct spi_nor *nor,
static void s28hx_t_late_init(struct spi_nor *nor)
{
nor->params->octal_dtr_enable = cypress_nor_octal_dtr_enable;
- nor->params->writesize = 16;
+ cypress_nor_ecc_init(nor);
}
static const struct spi_nor_fixups s28hx_t_fixups = {
next reply other threads:[~2023-05-07 10:53 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-07 10:53 gregkh [this message]
-- strict thread matches above, loose matches on Subject: below --
2023-05-07 10:53 FAILED: patch "[PATCH] mtd: spi-nor: spansion: Enable JFFS2 write buffer for" failed to apply to 6.3-stable tree gregkh
2023-05-07 11:23 gregkh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2023050724-lapped-bunkbed-43a4@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=Takahiro.Kuwano@infineon.com \
--cc=stable@vger.kernel.org \
--cc=tudor.ambarus@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox