Linux kernel -stable discussions
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: Takahiro.Kuwano@infineon.com, tudor.ambarus@linaro.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] mtd: spi-nor: spansion: Enable JFFS2 write buffer for" failed to apply to 5.15-stable tree
Date: Sun, 07 May 2023 12:53:38 +0200	[thread overview]
Message-ID: <2023050738-mobilize-unwrapped-91ca@gregkh> (raw)


The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x a9180c298d3527f43563d02a62cb9e7e145642c6
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2023050738-mobilize-unwrapped-91ca@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^..

Possible dependencies:

a9180c298d35 ("mtd: spi-nor: spansion: Enable JFFS2 write buffer for S25FS256T")
6afcc84080c4 ("mtd: spi-nor: spansion: Add support for Infineon S25FS256T")
b6b23833fc42 ("mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups")
a6b50aa12796 ("mtd: spi-nor: spansion: Add local function to discover page size")
c0abb861c5d0 ("mtd: spi-nor: Introduce templates for SPI NOR operations")
27ff0d34fb7e ("mtd: spi-nor: spansion: Rework spi_nor_cypress_octal_dtr_enable()")
4629adaff7bc ("mtd: spi-nor: micron-st: Rework spi_nor_micron_octal_dtr_enable()")
a007d81aa525 ("mtd: spi-nor: manufacturers: Use spi_nor_read_id() core method")
86b6b55ffbbc ("mtd: spi-nor: core: Introduce method for RDID op")
bffabd1c727d ("mtd: spi-nor: core: Use auto-detection only once")
837d5181beef ("mtd: spi-nor: move all spansion specifics into spansion.c")
6235ff040c13 ("mtd: spi-nor: spansion: slightly rework control flow in late_init()")
c770abe52d81 ("mtd: spi-nor: move all micron-st specifics into micron-st.c")
8b7a2e00d117 ("mtd: spi-nor: xilinx: rename vendor specific functions and defines")
8b4195cd6dc3 ("mtd: spi-nor: move all xilinx specifics into xilinx.c")
9fb4beb1b051 ("mtd: spi-nor: guard _page_size parameter in S3AN_INFO()")
4cf1c7bdc55c ("mtd: spi-nor: allow a flash to define its own ready() function")
b44aa9ac6bb4 ("mtd: spi-nor: slightly refactor the spi_nor_setup()")
45acce2099c5 ("mtd: spi-nor: xilinx: unify function names")
fedd0cbf3e93 ("mtd: spi-nor: spansion: unify function names")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From a9180c298d3527f43563d02a62cb9e7e145642c6 Mon Sep 17 00:00:00 2001
From: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Date: Thu, 6 Apr 2023 15:17:46 +0900
Subject: [PATCH] mtd: spi-nor: spansion: Enable JFFS2 write buffer for
 S25FS256T

Infineon(Cypress) SEMPER NOR flash family has on-die ECC and its program
granularity is 16-byte ECC data unit size. JFFS2 supports write buffer
mode for ECC'd NOR flash. Provide a way to clear the MTD_BIT_WRITEABLE
flag in order to enable JFFS2 write buffer mode support. Drop the
comment as the same info is now specified in cypress_nor_ecc_init().

Fixes: 6afcc84080c4 ("mtd: spi-nor: spansion: Add support for Infineon S25FS256T")
Suggested-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/641bfb26c6e059915ae920117b7ec278df1a6f0a.1680760742.git.Takahiro.Kuwano@infineon.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>

diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 4d0cc10e3d85..ffeede78700d 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -384,13 +384,7 @@ static void s25fs256t_post_sfdp_fixup(struct spi_nor *nor)
 
 static void s25fs256t_late_init(struct spi_nor *nor)
 {
-	/*
-	 * Programming is supported only in 16-byte ECC data unit granularity.
-	 * Byte-programming, bit-walking, or multiple program operations to the
-	 * same ECC data unit without an erase are not allowed. See chapter
-	 * 5.3.1 and 5.6 in the datasheet.
-	 */
-	nor->params->writesize = 16;
+	cypress_nor_ecc_init(nor);
 }
 
 static struct spi_nor_fixups s25fs256t_fixups = {


             reply	other threads:[~2023-05-07 10:53 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-07 10:53 gregkh [this message]
  -- strict thread matches above, loose matches on Subject: below --
2023-05-07 10:53 FAILED: patch "[PATCH] mtd: spi-nor: spansion: Enable JFFS2 write buffer for" failed to apply to 5.15-stable tree gregkh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2023050738-mobilize-unwrapped-91ca@gregkh \
    --to=gregkh@linuxfoundation.org \
    --cc=Takahiro.Kuwano@infineon.com \
    --cc=stable@vger.kernel.org \
    --cc=tudor.ambarus@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox