From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Alain Volmat <avolmat@me.com>,
Patrice Chotard <patrice.chotard@foss.st.com>,
Vinod Koul <vkoul@kernel.org>, Sasha Levin <sashal@kernel.org>,
kishon@kernel.org, linux-arm-kernel@lists.infradead.org,
linux-phy@lists.infradead.org
Subject: [PATCH AUTOSEL 6.1 2/8] phy: st: miphy28lp: use _poll_timeout functions for waits
Date: Wed, 10 May 2023 16:49:43 -0400 [thread overview]
Message-ID: <20230510204950.104873-2-sashal@kernel.org> (raw)
In-Reply-To: <20230510204950.104873-1-sashal@kernel.org>
From: Alain Volmat <avolmat@me.com>
[ Upstream commit e3be4dd2c8d8aabfd2c3127d0e2e5754d3ae82d6 ]
This commit introduces _poll_timeout functions usage instead of
wait loops waiting for a status bit.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20230210224309.98452-1-avolmat@me.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/phy/st/phy-miphy28lp.c | 42 ++++++++--------------------------
1 file changed, 10 insertions(+), 32 deletions(-)
diff --git a/drivers/phy/st/phy-miphy28lp.c b/drivers/phy/st/phy-miphy28lp.c
index 068160a34f5cc..e30305b77f0d1 100644
--- a/drivers/phy/st/phy-miphy28lp.c
+++ b/drivers/phy/st/phy-miphy28lp.c
@@ -9,6 +9,7 @@
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -484,19 +485,11 @@ static inline void miphy28lp_pcie_config_gen(struct miphy28lp_phy *miphy_phy)
static inline int miphy28lp_wait_compensation(struct miphy28lp_phy *miphy_phy)
{
- unsigned long finish = jiffies + 5 * HZ;
u8 val;
/* Waiting for Compensation to complete */
- do {
- val = readb_relaxed(miphy_phy->base + MIPHY_COMP_FSM_6);
-
- if (time_after_eq(jiffies, finish))
- return -EBUSY;
- cpu_relax();
- } while (!(val & COMP_DONE));
-
- return 0;
+ return readb_relaxed_poll_timeout(miphy_phy->base + MIPHY_COMP_FSM_6,
+ val, val & COMP_DONE, 1, 5 * USEC_PER_SEC);
}
@@ -805,7 +798,6 @@ static inline void miphy28lp_configure_usb3(struct miphy28lp_phy *miphy_phy)
static inline int miphy_is_ready(struct miphy28lp_phy *miphy_phy)
{
- unsigned long finish = jiffies + 5 * HZ;
u8 mask = HFC_PLL | HFC_RDY;
u8 val;
@@ -816,21 +808,14 @@ static inline int miphy_is_ready(struct miphy28lp_phy *miphy_phy)
if (miphy_phy->type == PHY_TYPE_SATA)
mask |= PHY_RDY;
- do {
- val = readb_relaxed(miphy_phy->base + MIPHY_STATUS_1);
- if ((val & mask) != mask)
- cpu_relax();
- else
- return 0;
- } while (!time_after_eq(jiffies, finish));
-
- return -EBUSY;
+ return readb_relaxed_poll_timeout(miphy_phy->base + MIPHY_STATUS_1,
+ val, (val & mask) == mask, 1,
+ 5 * USEC_PER_SEC);
}
static int miphy_osc_is_ready(struct miphy28lp_phy *miphy_phy)
{
struct miphy28lp_dev *miphy_dev = miphy_phy->phydev;
- unsigned long finish = jiffies + 5 * HZ;
u32 val;
if (!miphy_phy->osc_rdy)
@@ -839,17 +824,10 @@ static int miphy_osc_is_ready(struct miphy28lp_phy *miphy_phy)
if (!miphy_phy->syscfg_reg[SYSCFG_STATUS])
return -EINVAL;
- do {
- regmap_read(miphy_dev->regmap,
- miphy_phy->syscfg_reg[SYSCFG_STATUS], &val);
-
- if ((val & MIPHY_OSC_RDY) != MIPHY_OSC_RDY)
- cpu_relax();
- else
- return 0;
- } while (!time_after_eq(jiffies, finish));
-
- return -EBUSY;
+ return regmap_read_poll_timeout(miphy_dev->regmap,
+ miphy_phy->syscfg_reg[SYSCFG_STATUS],
+ val, val & MIPHY_OSC_RDY, 1,
+ 5 * USEC_PER_SEC);
}
static int miphy28lp_get_resource_byname(struct device_node *child,
--
2.39.2
next prev parent reply other threads:[~2023-05-10 20:51 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-10 20:49 [PATCH AUTOSEL 6.1 1/8] soundwire: dmi-quirks: add remapping for Intel 'Rooks County' NUC M15 Sasha Levin
2023-05-10 20:49 ` Sasha Levin [this message]
2023-05-10 20:49 ` [PATCH AUTOSEL 6.1 3/8] soundwire: qcom: gracefully handle too many ports in DT Sasha Levin
2023-05-10 20:49 ` [PATCH AUTOSEL 6.1 4/8] soundwire: bus: Fix unbalanced pm_runtime_put() causing usage count underflow Sasha Levin
2023-05-10 20:49 ` [PATCH AUTOSEL 6.1 5/8] mfd: intel_soc_pmic_chtwc: Add Lenovo Yoga Book X90F to intel_cht_wc_models Sasha Levin
2023-05-10 20:49 ` [PATCH AUTOSEL 6.1 6/8] mfd: dln2: Fix memory leak in dln2_probe() Sasha Levin
2023-05-10 20:49 ` [PATCH AUTOSEL 6.1 7/8] mfd: intel-lpss: Add Intel Meteor Lake PCH-S LPSS PCI IDs Sasha Levin
2023-05-10 20:49 ` [PATCH AUTOSEL 6.1 8/8] parisc: Replace regular spinlock with spin_trylock on panic path Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230510204950.104873-2-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=avolmat@me.com \
--cc=kishon@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=patrice.chotard@foss.st.com \
--cc=stable@vger.kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox