[PATCH 4.14 000/116] 4.14.315-rc1 review

[PATCH 4.14 000/116] 4.14.315-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.14.315 release.
There are 116 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 17 May 2023 16:16:37 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.315-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.14.315-rc1

Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
    mm/page_alloc: fix potential deadlock on zonelist_update_seq seqlock

Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
    printk: declare printk_deferred_{enter,safe}() in include/linux/printk.h

Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
    drbd: correctly submit flush bio on barrier

Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
    serial: 8250: Fix serial8250_tx_empty() race with DMA Tx

Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
    tty: Prevent writing chars during tcsetattr TCSADRAIN/FLUSH

Arnaldo Carvalho de Melo <acme@redhat.com>
    perf bench: Share some global variables to fix build with gcc 10

Theodore Ts'o <tytso@mit.edu>
    ext4: fix invalid free tracking in ext4_xattr_move_to_block()

Theodore Ts'o <tytso@mit.edu>
    ext4: remove a BUG_ON in ext4_mb_release_group_pa()

Theodore Ts'o <tytso@mit.edu>
    ext4: bail out of ext4_xattr_ibody_get() fails for any reason

Theodore Ts'o <tytso@mit.edu>
    ext4: add bounds checking in get_max_inline_xattr_value_size()

Theodore Ts'o <tytso@mit.edu>
    ext4: improve error recovery code paths in __ext4_remount()

Tudor Ambarus <tudor.ambarus@linaro.org>
    ext4: avoid a potential slab-out-of-bounds in ext4_group_desc_csum

Ping Cheng <pinglinux@gmail.com>
    HID: wacom: Set a default resolution for older tablets

Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
    ARM: dts: s5pv210: correct MIPI CSIS clock name

Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
    ARM: dts: exynos: fix WM8960 clock name in Itop Elite

Randy Dunlap <rdunlap@infradead.org>
    sh: nmi_debug: fix return value of __setup handler

Randy Dunlap <rdunlap@infradead.org>
    sh: math-emu: fix macro redefined warning

Pawel Witek <pawel.ireneusz.witek@gmail.com>
    cifs: fix pcchunk length type in smb2_copychunk_range

Anastasia Belova <abelova@astralinux.ru>
    btrfs: print-tree: parent bytenr must be aligned to sector size

Filipe Manana <fdmanana@suse.com>
    btrfs: fix btrfs_prev_leaf() to not return the same key twice

Yang Jihong <yangjihong1@huawei.com>
    perf symbols: Fix return incorrect build_id size in elf_read_build_id()

Markus Elfring <Markus.Elfring@web.de>
    perf map: Delete two variable initialisations before null pointer checks in sort__sym_from_cmp()

Kajol Jain <kjain@linux.ibm.com>
    perf vendor events power9: Remove UTF-8 characters from JSON files

Ruliang Lin <u202112092@hust.edu.cn>
    ALSA: caiaq: input: Add error handling for unsupported input methods in `snd_usb_caiaq_input_init`

Kuniyuki Iwashima <kuniyu@amazon.com>
    af_packet: Don't send zero-byte data in packet_sendmsg_spkt().

Victor Nogueira <victor@mojatatu.com>
    net/sched: act_mirred: Add carrier check

Maxim Korotkov <korotkov.maxim.s@gmail.com>
    writeback: fix call of incorrect macro

Cong Wang <cong.wang@bytedance.com>
    sit: update dev->needed_headroom in ipip6_tunnel_bind_dev()

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_tables: deactivate anonymous set from preparation phase

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_tables: bogus EBUSY when deleting set after flush

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_tables: use-after-free in failing rule with bound set

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nft_hash: fix nft_hash_deactivate

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_tables: unbind set in rule from commit path

Florian Westphal <fw@strlen.de>
    netfilter: nf_tables: split set destruction in deactivate and destroy phase

Adrian Hunter <adrian.hunter@intel.com>
    perf auxtrace: Fix address filter entire kernel size

Mike Snitzer <snitzer@kernel.org>
    dm ioctl: fix nested locking in table_clear() to remove deadlock concern

Mikulas Patocka <mpatocka@redhat.com>
    dm flakey: fix a crash with invalid table line

Mike Snitzer <snitzer@kernel.org>
    dm integrity: call kmem_cache_destroy() in dm_integrity_init() error path

Stefan Haberland <sth@linux.ibm.com>
    s390/dasd: fix hanging blockdevice after request requeue

Qu Wenruo <wqu@suse.com>
    btrfs: scrub: reject unsupported scrub flags

Quentin Schulz <quentin.schulz@theobroma-systems.com>
    clk: rockchip: rk3399: allow clk_cifout to force clk_cifout_src to reparent

Bitterblue Smith <rtl8821cerfe2@gmail.com>
    wifi: rtl8xxxu: RTL8192EU always needs full init

Ryusuke Konishi <konishi.ryusuke@gmail.com>
    nilfs2: fix infinite loop in nilfs_mdt_get_block()

Ryusuke Konishi <konishi.ryusuke@gmail.com>
    nilfs2: do not write dirty data after degenerating to read-only

Helge Deller <deller@gmx.de>
    parisc: Fix argument pointer in real64_call_asm()

Claudiu Beznea <claudiu.beznea@microchip.com>
    dmaengine: at_xdmac: do not enable all cyclic channels

Gaosheng Cui <cuigaosheng1@huawei.com>
    phy: tegra: xusb: Add missing tegra_xusb_port_unregister for usb2_port and ulpi_port

Dai Ngo <dai.ngo@oracle.com>
    SUNRPC: remove the maximum number of retries in call_bind_status

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFSv4.1: Always send a RECLAIM_COMPLETE after establishing lease

Patrick Kelsey <pat.kelsey@cornelisnetworks.com>
    IB/hfi1: Fix SDMA mmu_rb_node not being evicted in LRU order

Clément Léger <clement.leger@bootlin.com>
    clk: add missing of_node_put() in "assigned-clocks" property parsing

Sebastian Reichel <sre@kernel.org>
    power: supply: generic-adc-battery: fix unit scaling

Natalia Petrova <n.petrova@fintech.ru>
    RDMA/rdmavt: Delete unnecessary NULL check

Yang Jihong <yangjihong1@huawei.com>
    perf/core: Fix hardlockup failure caused by perf throttle

Nathan Lynch <nathanl@linux.ibm.com>
    powerpc/rtas: use memmove for potentially overlapping buffer copy

Randy Dunlap <rdunlap@infradead.org>
    macintosh: via-pmu-led: requires ATA to be set

Randy Dunlap <rdunlap@infradead.org>
    powerpc/sysdev/tsi108: fix resource printk format warnings

Randy Dunlap <rdunlap@infradead.org>
    powerpc/wii: fix resource printk format warnings

Randy Dunlap <rdunlap@infradead.org>
    powerpc/mpc512x: fix resource printk format warning

Liang He <windhl@126.com>
    macintosh/windfarm_smu_sat: Add missing of_node_put()

Jishnu Prakash <quic_jprakash@quicinc.com>
    spmi: Add a check for remove callback when removing a SPMI driver

Philipp Hortmann <philipp.g.hortmann@gmail.com>
    staging: rtl8192e: Fix W_DISABLE# does not work after stop/start

Florian Fainelli <f.fainelli@gmail.com>
    serial: 8250: Add missing wakeup event reporting

Shenwei Wang <shenwei.wang@nxp.com>
    tty: serial: fsl_lpuart: adjust buffer length to the intended size

Yinhao Hu <dddddd@hust.edu.cn>
    usb: chipidea: fix missing goto in `ci_hdrc_probe`

John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
    sh: sq: Fix incorrect element size for allocating bitmap buffer

Kevin Brodsky <kevin.brodsky@arm.com>
    uapi/linux/const.h: prefer ISO-friendly __typeof__

Randy Dunlap <rdunlap@infradead.org>
    ia64: mm/contig: fix section mismatch warning/error

Miquel Raynal <miquel.raynal@bootlin.com>
    of: Fix modalias string generation

Christophe Leroy <christophe.leroy@csgroup.eu>
    spi: fsl-spi: Fix CPM/QE mode Litte Endian

Randy Dunlap <rdunlap@infradead.org>
    linux/vt_buffer.h: allow either builtin or modular for macros

John Stultz <jstultz@google.com>
    pstore: Revert pmsg_lock back to a normal mutex

Kuniyuki Iwashima <kuniyu@amazon.com>
    tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.

Gencen Gan <gangecen@hust.edu.cn>
    net: amd: Fix link leak when verifying config failed

Liu Jian <liujian56@huawei.com>
    Revert "Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work"

Ziyang Xuan <william.xuanziyang@huawei.com>
    ipv4: Fix potential uninit variable access bug in __ip_make_skb()

Joe Damato <jdamato@fastly.com>
    ixgbe: Enable setting RSS table to default values

Joe Damato <jdamato@fastly.com>
    ixgbe: Allow flow hash to be set via ethtool

Johannes Berg <johannes.berg@intel.com>
    wifi: iwlwifi: mvm: check firmware response size

Emmanuel Grumbach <emmanuel.grumbach@intel.com>
    wifi: iwlwifi: make the loop for card preparation effective

Yu Kuai <yukuai3@huawei.com>
    md/raid10: fix leak of 'r10bio->remaining' for recovery

Danila Chernetsov <listdansp@mail.ru>
    scsi: megaraid: Fix mega_cmd_done() CMDID_INT_CMDS

Mike Christie <michael.christie@oracle.com>
    scsi: target: iscsit: Fix TAS handling during conn cleanup

Eric Dumazet <edumazet@google.com>
    net/packet: convert po->auxdata to an atomic flag

Eric Dumazet <edumazet@google.com>
    net/packet: convert po->origdev to an atomic flag

Vadim Fedorenko <vadim.fedorenko@linux.dev>
    vlan: partially enable SIOCSHWTSTAMP in container

Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
    scm: fix MSG_CTRUNC setting condition for SO_PASSSEC

Fedor Pchelkin <pchelkin@ispras.ru>
    wifi: ath6kl: reduce WARN to dev_dbg() in callback

Dan Carpenter <error27@gmail.com>
    wifi: ath5k: fix an off by one check in ath5k_eeprom_read_freq_list()

Alexey V. Vissarionov <gremlin@altlinux.org>
    wifi: ath6kl: minor fix for allocation size

Sumit Garg <sumit.garg@linaro.org>
    arm64: kgdb: Set PSTATE.SS to 1 to re-enable single-step

Saurabh Sengar <ssengar@linux.microsoft.com>
    x86/ioapic: Don't return 0 from arch_dynirq_lower_bound()

Zheng Wang <zyytlz.wz@163.com>
    media: dm1105: Fix use after free bug in dm1105_remove due to race condition

Uros Bizjak <ubizjak@gmail.com>
    x86/apic: Fix atomic update of offset in reserve_eilvt_offset()

Dan Carpenter <error27@gmail.com>
    media: av7110: prevent underflow in write_ts_to_decoder()

Jiasheng Jiang <jiasheng@iscas.ac.cn>
    media: bdisp: Add missing check for create_workqueue

Dom Cobley <popcornmix@gmail.com>
    drm/probe-helper: Cancel previous job before starting new one

Maíra Canal <mcanal@igalia.com>
    drm/vgem: add missing mutex_destroy

Rob Clark <robdclark@chromium.org>
    drm/rockchip: Drop unbalanced obj unref

Paul Moore <paul@paul-moore.com>
    selinux: ensure av_permissions.h is built when needed

Ondrej Mosnacek <omosnace@redhat.com>
    selinux: fix Makefile dependencies of flask.h

Mårten Lindahl <marten.lindahl@axis.com>
    ubifs: Free memory for tmpfile name

Wang YanQing <udknight@gmail.com>
    ubi: Fix return value overwrite issue in try_write_vid_and_data()

Zhihao Cheng <chengzhihao1@huawei.com>
    Revert "ubifs: dirty_cow_znode: Fix memleak in error handling path"

Reid Tonking <reidt@ti.com>
    i2c: omap: Fix standard mode false ACK readings

Roberto Sassu <roberto.sassu@huawei.com>
    reiserfs: Add security prefix to xattr name in reiserfs_security_write()

Johannes Berg <johannes.berg@intel.com>
    ring-buffer: Sync IRQ works before buffer destruction

Jiaxun Yang <jiaxun.yang@flygoat.com>
    MIPS: fw: Allow firmware to pass a empty env

Nuno Sá <nuno.sa@analog.com>
    staging: iio: resolver: ads1210: fix config mode

Arnaldo Carvalho de Melo <acme@redhat.com>
    perf sched: Cast PTHREAD_STACK_MIN to int as it may turn into sysconf(__SC_THREAD_STACK_MIN_VALUE)

Johan Hovold <johan+linaro@kernel.org>
    USB: dwc3: fix runtime pm imbalance on unbind

Randy Dunlap <rdunlap@infradead.org>
    IMA: allow/fix UML builds

Patrik Dahlström <risca@dalakolonin.se>
    iio: adc: palmas_gpadc: fix NULL dereference on rmmod

Arınç ÜNAL <arinc.unal@arinc9.com>
    USB: serial: option: add UNISOC vendor and TOZED LT70C product

Ruihan Li <lrh2000@pku.edu.cn>
    bluetooth: Perform careful capability checks in hci_sock_ioctl()

Jisoo Jang <jisoo.jang@yonsei.ac.kr>
    wifi: brcmfmac: slab-out-of-bounds read in brcmf_get_assoc_ies()


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arm/boot/dts/exynos4412-itop-elite.dts        |   2 +-
 arch/arm/boot/dts/s5pv210.dtsi                     |   2 +-
 arch/arm64/include/asm/debug-monitors.h            |   1 +
 arch/arm64/kernel/debug-monitors.c                 |   5 +
 arch/arm64/kernel/kgdb.c                           |   2 +
 arch/ia64/mm/contig.c                              |   2 +-
 arch/mips/fw/lib/cmdline.c                         |   2 +-
 arch/parisc/kernel/real2.S                         |   5 +-
 arch/powerpc/kernel/rtas.c                         |   2 +-
 arch/powerpc/platforms/512x/clock-commonclk.c      |   2 +-
 arch/powerpc/platforms/embedded6xx/flipper-pic.c   |   2 +-
 arch/powerpc/platforms/embedded6xx/hlwd-pic.c      |   2 +-
 arch/powerpc/platforms/embedded6xx/wii.c           |   4 +-
 arch/powerpc/sysdev/tsi108_pci.c                   |   5 +-
 arch/sh/kernel/cpu/sh4/sq.c                        |   2 +-
 arch/sh/kernel/nmi_debug.c                         |   4 +-
 arch/sh/math-emu/sfp-util.h                        |   4 -
 arch/x86/kernel/apic/apic.c                        |   5 +-
 arch/x86/kernel/apic/io_apic.c                     |  14 ++-
 drivers/block/drbd/drbd_receiver.c                 |   2 +-
 drivers/bluetooth/btsdio.c                         |   1 -
 drivers/clk/clk-conf.c                             |  12 +-
 drivers/clk/rockchip/clk-rk3399.c                  |   2 +-
 drivers/dma/at_xdmac.c                             |   5 +-
 drivers/gpu/drm/drm_probe_helper.c                 |   5 +-
 drivers/gpu/drm/rockchip/rockchip_drm_gem.c        |   3 -
 drivers/gpu/drm/vgem/vgem_fence.c                  |   1 +
 drivers/hid/wacom_wac.c                            |  12 +-
 drivers/i2c/busses/i2c-omap.c                      |   2 +-
 drivers/iio/adc/palmas_gpadc.c                     |   2 +-
 drivers/infiniband/hw/hfi1/mmu_rb.c                |  13 +-
 drivers/infiniband/sw/rdmavt/qp.c                  |   2 -
 drivers/macintosh/Kconfig                          |   1 +
 drivers/macintosh/windfarm_smu_sat.c               |   1 +
 drivers/md/dm-flakey.c                             |   4 +-
 drivers/md/dm-integrity.c                          |   8 +-
 drivers/md/dm-ioctl.c                              |   7 +-
 drivers/md/raid10.c                                |  23 ++--
 drivers/media/pci/dm1105/dm1105.c                  |   1 +
 drivers/media/pci/ttpci/av7110_av.c                |   4 +-
 drivers/media/platform/sti/bdisp/bdisp-v4l2.c      |   2 +
 drivers/mtd/ubi/eba.c                              |  19 ++-
 drivers/net/ethernet/amd/nmclan_cs.c               |   2 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c   |  23 ++--
 drivers/net/wireless/ath/ath5k/eeprom.c            |   2 +-
 drivers/net/wireless/ath/ath6kl/bmi.c              |   2 +-
 drivers/net/wireless/ath/ath6kl/htc_pipe.c         |   4 +-
 .../broadcom/brcm80211/brcmfmac/cfg80211.c         |   5 +
 drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c   |  10 ++
 drivers/net/wireless/intel/iwlwifi/pcie/trans.c    |   3 +-
 .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c |   1 +
 drivers/of/device.c                                |   7 +-
 drivers/phy/tegra/xusb.c                           |   2 +
 drivers/power/supply/generic-adc-battery.c         |   3 +
 drivers/s390/block/dasd.c                          |   2 +-
 drivers/scsi/megaraid.c                            |   1 +
 drivers/spi/spi-fsl-spi.c                          |  12 +-
 drivers/spmi/spmi.c                                |   3 +-
 drivers/staging/iio/resolver/ad2s1210.c            |   2 +-
 drivers/staging/rtl8192e/rtl8192e/rtl_core.c       |   1 +
 drivers/target/iscsi/iscsi_target.c                |  16 +--
 drivers/tty/serial/8250/8250.h                     |  12 ++
 drivers/tty/serial/8250/8250_port.c                |  16 ++-
 drivers/tty/serial/fsl_lpuart.c                    |   2 +-
 drivers/tty/tty_io.c                               |   4 +-
 drivers/tty/tty_ioctl.c                            |  47 +++++--
 drivers/usb/chipidea/core.c                        |   2 +-
 drivers/usb/dwc3/core.c                            |   1 +
 drivers/usb/serial/option.c                        |   6 +
 fs/btrfs/ctree.c                                   |  32 ++++-
 fs/btrfs/ioctl.c                                   |   5 +
 fs/btrfs/print-tree.c                              |   6 +-
 fs/cifs/smb2ops.c                                  |   2 +-
 fs/ext4/inline.c                                   |  14 ++-
 fs/ext4/mballoc.c                                  |   6 +-
 fs/ext4/super.c                                    |  19 +--
 fs/ext4/xattr.c                                    |   5 +-
 fs/fs-writeback.c                                  |   2 +-
 fs/nfs/nfs4state.c                                 |   4 +
 fs/nilfs2/bmap.c                                   |  16 ++-
 fs/nilfs2/segment.c                                |   5 +-
 fs/pstore/pmsg.c                                   |   7 +-
 fs/reiserfs/xattr_security.c                       |   8 +-
 fs/ubifs/dir.c                                     |   1 +
 fs/ubifs/tnc.c                                     |   9 +-
 include/linux/printk.h                             |  19 +++
 include/linux/sunrpc/sched.h                       |   3 +-
 include/linux/tty.h                                |   2 +
 include/linux/vt_buffer.h                          |   2 +-
 include/net/netfilter/nf_tables.h                  |  30 ++++-
 include/net/scm.h                                  |  13 +-
 include/uapi/linux/btrfs.h                         |   1 +
 include/uapi/linux/const.h                         |   2 +-
 kernel/events/core.c                               |   4 +-
 kernel/trace/ring_buffer.c                         |   4 +
 mm/page_alloc.c                                    |  16 +++
 net/8021q/vlan_dev.c                               |   2 +-
 net/bluetooth/hci_sock.c                           |   9 +-
 net/core/skbuff.c                                  |   3 +
 net/ipv4/ip_output.c                               |  16 ++-
 net/ipv6/sit.c                                     |   8 +-
 net/netfilter/nf_tables_api.c                      | 139 +++++++++++++++------
 net/netfilter/nft_dynset.c                         |  22 +++-
 net/netfilter/nft_immediate.c                      |   6 +-
 net/netfilter/nft_lookup.c                         |  21 +++-
 net/netfilter/nft_objref.c                         |  21 +++-
 net/netfilter/nft_set_hash.c                       |   2 +-
 net/packet/af_packet.c                             |  20 ++-
 net/packet/diag.c                                  |   4 +-
 net/packet/internal.h                              |  26 +++-
 net/sched/act_mirred.c                             |   2 +-
 net/sunrpc/clnt.c                                  |   3 -
 net/sunrpc/sched.c                                 |   1 -
 security/integrity/ima/Kconfig                     |   2 +-
 security/selinux/Makefile                          |   4 +-
 sound/usb/caiaq/input.c                            |   1 +
 tools/perf/bench/bench.h                           |   4 +
 tools/perf/bench/futex-hash.c                      |  12 +-
 tools/perf/bench/futex-lock-pi.c                   |  11 +-
 tools/perf/builtin-sched.c                         |   2 +-
 .../perf/pmu-events/arch/powerpc/power9/other.json |   4 +-
 .../pmu-events/arch/powerpc/power9/pipeline.json   |   2 +-
 tools/perf/util/auxtrace.c                         |   5 +-
 tools/perf/util/sort.c                             |   3 +-
 tools/perf/util/symbol-elf.c                       |   2 +-
 126 files changed, 708 insertions(+), 280 deletions(-)

[PATCH 4.14 001/116] wifi: brcmfmac: slab-out-of-bounds read in brcmf_get_assoc_ies()

[Greg Kroah-Hartman]

From: Jisoo Jang <jisoo.jang@yonsei.ac.kr>

commit 0da40e018fd034d87c9460123fa7f897b69fdee7 upstream.

Fix a slab-out-of-bounds read that occurs in kmemdup() called from
brcmf_get_assoc_ies().
The bug could occur when assoc_info->req_len, data from a URB provided
by a USB device, is bigger than the size of buffer which is defined as
WL_EXTRA_BUF_MAX.

Add the size check for req_len/resp_len of assoc_info.

Found by a modified version of syzkaller.

[   46.592467][    T7] ==================================================================
[   46.594687][    T7] BUG: KASAN: slab-out-of-bounds in kmemdup+0x3e/0x50
[   46.596572][    T7] Read of size 3014656 at addr ffff888019442000 by task kworker/0:1/7
[   46.598575][    T7]
[   46.599157][    T7] CPU: 0 PID: 7 Comm: kworker/0:1 Tainted: G           O      5.14.0+ #145
[   46.601333][    T7] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[   46.604360][    T7] Workqueue: events brcmf_fweh_event_worker
[   46.605943][    T7] Call Trace:
[   46.606584][    T7]  dump_stack_lvl+0x8e/0xd1
[   46.607446][    T7]  print_address_description.constprop.0.cold+0x93/0x334
[   46.608610][    T7]  ? kmemdup+0x3e/0x50
[   46.609341][    T7]  kasan_report.cold+0x79/0xd5
[   46.610151][    T7]  ? kmemdup+0x3e/0x50
[   46.610796][    T7]  kasan_check_range+0x14e/0x1b0
[   46.611691][    T7]  memcpy+0x20/0x60
[   46.612323][    T7]  kmemdup+0x3e/0x50
[   46.612987][    T7]  brcmf_get_assoc_ies+0x967/0xf60
[   46.613904][    T7]  ? brcmf_notify_vif_event+0x3d0/0x3d0
[   46.614831][    T7]  ? lock_chain_count+0x20/0x20
[   46.615683][    T7]  ? mark_lock.part.0+0xfc/0x2770
[   46.616552][    T7]  ? lock_chain_count+0x20/0x20
[   46.617409][    T7]  ? mark_lock.part.0+0xfc/0x2770
[   46.618244][    T7]  ? lock_chain_count+0x20/0x20
[   46.619024][    T7]  brcmf_bss_connect_done.constprop.0+0x241/0x2e0
[   46.620019][    T7]  ? brcmf_parse_configure_security.isra.0+0x2a0/0x2a0
[   46.620818][    T7]  ? __lock_acquire+0x181f/0x5790
[   46.621462][    T7]  brcmf_notify_connect_status+0x448/0x1950
[   46.622134][    T7]  ? rcu_read_lock_bh_held+0xb0/0xb0
[   46.622736][    T7]  ? brcmf_cfg80211_join_ibss+0x7b0/0x7b0
[   46.623390][    T7]  ? find_held_lock+0x2d/0x110
[   46.623962][    T7]  ? brcmf_fweh_event_worker+0x19f/0xc60
[   46.624603][    T7]  ? mark_held_locks+0x9f/0xe0
[   46.625145][    T7]  ? lockdep_hardirqs_on_prepare+0x3e0/0x3e0
[   46.625871][    T7]  ? brcmf_cfg80211_join_ibss+0x7b0/0x7b0
[   46.626545][    T7]  brcmf_fweh_call_event_handler.isra.0+0x90/0x100
[   46.627338][    T7]  brcmf_fweh_event_worker+0x557/0xc60
[   46.627962][    T7]  ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100
[   46.628736][    T7]  ? rcu_read_lock_sched_held+0xa1/0xd0
[   46.629396][    T7]  ? rcu_read_lock_bh_held+0xb0/0xb0
[   46.629970][    T7]  ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[   46.630649][    T7]  process_one_work+0x92b/0x1460
[   46.631205][    T7]  ? pwq_dec_nr_in_flight+0x330/0x330
[   46.631821][    T7]  ? rwlock_bug.part.0+0x90/0x90
[   46.632347][    T7]  worker_thread+0x95/0xe00
[   46.632832][    T7]  ? __kthread_parkme+0x115/0x1e0
[   46.633393][    T7]  ? process_one_work+0x1460/0x1460
[   46.633957][    T7]  kthread+0x3a1/0x480
[   46.634369][    T7]  ? set_kthread_struct+0x120/0x120
[   46.634933][    T7]  ret_from_fork+0x1f/0x30
[   46.635431][    T7]
[   46.635687][    T7] Allocated by task 7:
[   46.636151][    T7]  kasan_save_stack+0x1b/0x40
[   46.636628][    T7]  __kasan_kmalloc+0x7c/0x90
[   46.637108][    T7]  kmem_cache_alloc_trace+0x19e/0x330
[   46.637696][    T7]  brcmf_cfg80211_attach+0x4a0/0x4040
[   46.638275][    T7]  brcmf_attach+0x389/0xd40
[   46.638739][    T7]  brcmf_usb_probe+0x12de/0x1690
[   46.639279][    T7]  usb_probe_interface+0x2aa/0x760
[   46.639820][    T7]  really_probe+0x205/0xb70
[   46.640342][    T7]  __driver_probe_device+0x311/0x4b0
[   46.640876][    T7]  driver_probe_device+0x4e/0x150
[   46.641445][    T7]  __device_attach_driver+0x1cc/0x2a0
[   46.642000][    T7]  bus_for_each_drv+0x156/0x1d0
[   46.642543][    T7]  __device_attach+0x23f/0x3a0
[   46.643065][    T7]  bus_probe_device+0x1da/0x290
[   46.643644][    T7]  device_add+0xb7b/0x1eb0
[   46.644130][    T7]  usb_set_configuration+0xf59/0x16f0
[   46.644720][    T7]  usb_generic_driver_probe+0x82/0xa0
[   46.645295][    T7]  usb_probe_device+0xbb/0x250
[   46.645786][    T7]  really_probe+0x205/0xb70
[   46.646258][    T7]  __driver_probe_device+0x311/0x4b0
[   46.646804][    T7]  driver_probe_device+0x4e/0x150
[   46.647387][    T7]  __device_attach_driver+0x1cc/0x2a0
[   46.647926][    T7]  bus_for_each_drv+0x156/0x1d0
[   46.648454][    T7]  __device_attach+0x23f/0x3a0
[   46.648939][    T7]  bus_probe_device+0x1da/0x290
[   46.649478][    T7]  device_add+0xb7b/0x1eb0
[   46.649936][    T7]  usb_new_device.cold+0x49c/0x1029
[   46.650526][    T7]  hub_event+0x1c98/0x3950
[   46.650975][    T7]  process_one_work+0x92b/0x1460
[   46.651535][    T7]  worker_thread+0x95/0xe00
[   46.651991][    T7]  kthread+0x3a1/0x480
[   46.652413][    T7]  ret_from_fork+0x1f/0x30
[   46.652885][    T7]
[   46.653131][    T7] The buggy address belongs to the object at ffff888019442000
[   46.653131][    T7]  which belongs to the cache kmalloc-2k of size 2048
[   46.654669][    T7] The buggy address is located 0 bytes inside of
[   46.654669][    T7]  2048-byte region [ffff888019442000, ffff888019442800)
[   46.656137][    T7] The buggy address belongs to the page:
[   46.656720][    T7] page:ffffea0000651000 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x19440
[   46.657792][    T7] head:ffffea0000651000 order:3 compound_mapcount:0 compound_pincount:0
[   46.658673][    T7] flags: 0x100000000010200(slab|head|node=0|zone=1)
[   46.659422][    T7] raw: 0100000000010200 0000000000000000 dead000000000122 ffff888100042000
[   46.660363][    T7] raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000
[   46.661236][    T7] page dumped because: kasan: bad access detected
[   46.661956][    T7] page_owner tracks the page as allocated
[   46.662588][    T7] page last allocated via order 3, migratetype Unmovable, gfp_mask 0x52a20(GFP_ATOMIC|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP), pid 7, ts 31136961085, free_ts 0
[   46.664271][    T7]  prep_new_page+0x1aa/0x240
[   46.664763][    T7]  get_page_from_freelist+0x159a/0x27c0
[   46.665340][    T7]  __alloc_pages+0x2da/0x6a0
[   46.665847][    T7]  alloc_pages+0xec/0x1e0
[   46.666308][    T7]  allocate_slab+0x380/0x4e0
[   46.666770][    T7]  ___slab_alloc+0x5bc/0x940
[   46.667264][    T7]  __slab_alloc+0x6d/0x80
[   46.667712][    T7]  kmem_cache_alloc_trace+0x30a/0x330
[   46.668299][    T7]  brcmf_usbdev_qinit.constprop.0+0x50/0x470
[   46.668885][    T7]  brcmf_usb_probe+0xc97/0x1690
[   46.669438][    T7]  usb_probe_interface+0x2aa/0x760
[   46.669988][    T7]  really_probe+0x205/0xb70
[   46.670487][    T7]  __driver_probe_device+0x311/0x4b0
[   46.671031][    T7]  driver_probe_device+0x4e/0x150
[   46.671604][    T7]  __device_attach_driver+0x1cc/0x2a0
[   46.672192][    T7]  bus_for_each_drv+0x156/0x1d0
[   46.672739][    T7] page_owner free stack trace missing
[   46.673335][    T7]
[   46.673620][    T7] Memory state around the buggy address:
[   46.674213][    T7]  ffff888019442700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   46.675083][    T7]  ffff888019442780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   46.675994][    T7] >ffff888019442800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   46.676875][    T7]                    ^
[   46.677323][    T7]  ffff888019442880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   46.678190][    T7]  ffff888019442900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   46.679052][    T7] ==================================================================
[   46.679945][    T7] Disabling lock debugging due to kernel taint
[   46.680725][    T7] Kernel panic - not syncing:

Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230309104457.22628-1-jisoo.jang@yonsei.ac.kr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -5458,6 +5458,11 @@ static s32 brcmf_get_assoc_ies(struct br
 		(struct brcmf_cfg80211_assoc_ielen_le *)cfg->extra_buf;
 	req_len = le32_to_cpu(assoc_info->req_len);
 	resp_len = le32_to_cpu(assoc_info->resp_len);
+	if (req_len > WL_EXTRA_BUF_MAX || resp_len > WL_EXTRA_BUF_MAX) {
+		brcmf_err("invalid lengths in assoc info: req %u resp %u\n",
+			 req_len, resp_len);
+		return -EINVAL;
+	}
 	if (req_len) {
 		err = brcmf_fil_iovar_data_get(ifp, "assoc_req_ies",
 					       cfg->extra_buf,

[PATCH 4.14 002/116] bluetooth: Perform careful capability checks in hci_sock_ioctl()

[Greg Kroah-Hartman]

From: Ruihan Li <lrh2000@pku.edu.cn>

commit 25c150ac103a4ebeed0319994c742a90634ddf18 upstream.

Previously, capability was checked using capable(), which verified that the
caller of the ioctl system call had the required capability. In addition,
the result of the check would be stored in the HCI_SOCK_TRUSTED flag,
making it persistent for the socket.

However, malicious programs can abuse this approach by deliberately sharing
an HCI socket with a privileged task. The HCI socket will be marked as
trusted when the privileged task occasionally makes an ioctl call.

This problem can be solved by using sk_capable() to check capability, which
ensures that not only the current task but also the socket opener has the
specified capability, thus reducing the risk of privilege escalation
through the previously identified vulnerability.

Cc: stable@vger.kernel.org
Fixes: f81f5b2db869 ("Bluetooth: Send control open and close messages for HCI raw sockets")
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bluetooth/hci_sock.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/net/bluetooth/hci_sock.c
+++ b/net/bluetooth/hci_sock.c
@@ -984,7 +984,14 @@ static int hci_sock_ioctl(struct socket
 	if (hci_sock_gen_cookie(sk)) {
 		struct sk_buff *skb;
 
-		if (capable(CAP_NET_ADMIN))
+		/* Perform careful checks before setting the HCI_SOCK_TRUSTED
+		 * flag. Make sure that not only the current task but also
+		 * the socket opener has the required capability, since
+		 * privileged programs can be tricked into making ioctl calls
+		 * on HCI sockets, and the socket should not be marked as
+		 * trusted simply because the ioctl caller is privileged.
+		 */
+		if (sk_capable(sk, CAP_NET_ADMIN))
 			hci_sock_set_flag(sk, HCI_SOCK_TRUSTED);
 
 		/* Send event to monitor */

[PATCH 4.14 003/116] USB: serial: option: add UNISOC vendor and TOZED LT70C product

[Greg Kroah-Hartman]

From: Arınç ÜNAL <arinc.unal@arinc9.com>

commit a095edfc15f0832e046ae23964e249ef5c95af87 upstream.

Add UNISOC vendor ID and TOZED LT70-C modem which is based from UNISOC
SL8563. The modem supports the NCM mode. Interface 0 is used for running
the AT commands. Interface 12 is the ADB interface.

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1782 ProdID=4055 Rev=04.04
S:  Manufacturer=Unisoc Phone
S:  Product=Unisoc Phone
S:  SerialNumber=<redacted>
C:  #Ifs=14 Cfg#= 1 Atr=c0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm
E:  Ad=82(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#=10 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#=11 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#=12 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#=13 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm
E:  Ad=84(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 3 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm
E:  Ad=86(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 6 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm
E:  Ad=88(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 7 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230417152003.243248-1-arinc.unal@arinc9.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -598,6 +598,11 @@ static void option_instat_callback(struc
 #define SIERRA_VENDOR_ID			0x1199
 #define SIERRA_PRODUCT_EM9191			0x90d3
 
+/* UNISOC (Spreadtrum) products */
+#define UNISOC_VENDOR_ID			0x1782
+/* TOZED LT70-C based on UNISOC SL8563 uses UNISOC's vendor ID */
+#define TOZED_PRODUCT_LT70C			0x4055
+
 /* Device flags */
 
 /* Highest interface number which can be used with NCTRL() and RSVD() */
@@ -2227,6 +2232,7 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(OPPO_VENDOR_ID, OPPO_PRODUCT_R11, 0xff, 0xff, 0x30) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x30) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, TOZED_PRODUCT_LT70C, 0xff, 0, 0) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);

[PATCH 4.14 004/116] iio: adc: palmas_gpadc: fix NULL dereference on rmmod

[Greg Kroah-Hartman]

From: Patrik Dahlström <risca@dalakolonin.se>

[ Upstream commit 49f76c499d38bf67803438eee88c8300d0f6ce09 ]

Calling dev_to_iio_dev() on a platform device pointer is undefined and
will make adc NULL.

Signed-off-by: Patrik Dahlström <risca@dalakolonin.se>
Link: https://lore.kernel.org/r/20230313205029.1881745-1-risca@dalakolonin.se
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/adc/palmas_gpadc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/adc/palmas_gpadc.c b/drivers/iio/adc/palmas_gpadc.c
index f5218461ae255..f422df4daadcb 100644
--- a/drivers/iio/adc/palmas_gpadc.c
+++ b/drivers/iio/adc/palmas_gpadc.c
@@ -634,7 +634,7 @@ static int palmas_gpadc_probe(struct platform_device *pdev)
 
 static int palmas_gpadc_remove(struct platform_device *pdev)
 {
-	struct iio_dev *indio_dev = dev_to_iio_dev(&pdev->dev);
+	struct iio_dev *indio_dev = dev_get_drvdata(&pdev->dev);
 	struct palmas_gpadc *adc = iio_priv(indio_dev);
 
 	if (adc->wakeup1_enable || adc->wakeup2_enable)
-- 
2.39.2

[PATCH 4.14 005/116] IMA: allow/fix UML builds

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

commit 644f17412f5acf01a19af9d04a921937a2bc86c6 upstream.

UML supports HAS_IOMEM since 0bbadafdc49d (um: allow disabling
NO_IOMEM).

Current IMA build on UML fails on allmodconfig (with TCG_TPM=m):

ld: security/integrity/ima/ima_queue.o: in function `ima_add_template_entry':
ima_queue.c:(.text+0x2d9): undefined reference to `tpm_pcr_extend'
ld: security/integrity/ima/ima_init.o: in function `ima_init':
ima_init.c:(.init.text+0x43f): undefined reference to `tpm_default_chip'
ld: security/integrity/ima/ima_crypto.o: in function `ima_calc_boot_aggregate_tfm':
ima_crypto.c:(.text+0x1044): undefined reference to `tpm_pcr_read'
ld: ima_crypto.c:(.text+0x10d8): undefined reference to `tpm_pcr_read'

Modify the IMA Kconfig entry so that it selects TCG_TPM if HAS_IOMEM
is set, regardless of the UML Kconfig setting.
This updates TCG_TPM from =m to =y and fixes the linker errors.

Fixes: f4a0391dfa91 ("ima: fix Kconfig dependencies")
Cc: Stable <stable@vger.kernel.org> # v5.14+
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-um@lists.infradead.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 security/integrity/ima/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/security/integrity/ima/Kconfig
+++ b/security/integrity/ima/Kconfig
@@ -8,7 +8,7 @@ config IMA
 	select CRYPTO_MD5
 	select CRYPTO_SHA1
 	select CRYPTO_HASH_INFO
-	select TCG_TPM if HAS_IOMEM && !UML
+	select TCG_TPM if HAS_IOMEM
 	select TCG_TIS if TCG_TPM && X86
 	select TCG_CRB if TCG_TPM && ACPI
 	select TCG_IBMVTPM if TCG_TPM && PPC_PSERIES

[PATCH 4.14 006/116] USB: dwc3: fix runtime pm imbalance on unbind

[Greg Kroah-Hartman]

From: Johan Hovold <johan+linaro@kernel.org>

commit 44d257e9012ee8040e41d224d0e5bfb5ef5427ea upstream.

Make sure to balance the runtime PM usage count on driver unbind by
adding back the pm_runtime_allow() call that had been erroneously
removed.

Fixes: 266d0493900a ("usb: dwc3: core: don't trigger runtime pm when remove driver")
Cc: stable@vger.kernel.org	# 5.9
Cc: Li Jun <jun.li@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230404072524.19014-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/core.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1348,6 +1348,7 @@ static int dwc3_remove(struct platform_d
 	dwc3_core_exit(dwc);
 	dwc3_ulpi_exit(dwc);
 
+	pm_runtime_allow(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 	pm_runtime_put_noidle(&pdev->dev);
 	pm_runtime_set_suspended(&pdev->dev);

[PATCH 4.14 007/116] perf sched: Cast PTHREAD_STACK_MIN to int as it may turn into sysconf(__SC_THREAD_STACK_MIN_VALUE)

[Greg Kroah-Hartman]

From: Arnaldo Carvalho de Melo <acme@redhat.com>

commit d08c84e01afa7a7eee6badab25d5420fa847f783 upstream.

In fedora rawhide the PTHREAD_STACK_MIN define may end up expanded to a
sysconf() call, and that will return 'long int', breaking the build:

    45 fedora:rawhide                : FAIL gcc version 11.1.1 20210623 (Red Hat 11.1.1-6) (GCC)
      builtin-sched.c: In function 'create_tasks':
      /git/perf-5.14.0-rc1/tools/include/linux/kernel.h:43:24: error: comparison of distinct pointer types lacks a cast [-Werror]
         43 |         (void) (&_max1 == &_max2);              \
            |                        ^~
      builtin-sched.c:673:34: note: in expansion of macro 'max'
        673 |                         (size_t) max(16 * 1024, PTHREAD_STACK_MIN));
            |                                  ^~~
      cc1: all warnings being treated as errors

  $ grep __sysconf /usr/include/*/*.h
  /usr/include/bits/pthread_stack_min-dynamic.h:extern long int __sysconf (int __name) __THROW;
  /usr/include/bits/pthread_stack_min-dynamic.h:#   define PTHREAD_STACK_MIN __sysconf (__SC_THREAD_STACK_MIN_VALUE)
  /usr/include/bits/time.h:extern long int __sysconf (int);
  /usr/include/bits/time.h:# define CLK_TCK ((__clock_t) __sysconf (2))	/* 2 is _SC_CLK_TCK */
  $

So cast it to int to cope with that.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/builtin-sched.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/tools/perf/builtin-sched.c
+++ b/tools/perf/builtin-sched.c
@@ -655,7 +655,7 @@ static void create_tasks(struct perf_sch
 	err = pthread_attr_init(&attr);
 	BUG_ON(err);
 	err = pthread_attr_setstacksize(&attr,
-			(size_t) max(16 * 1024, PTHREAD_STACK_MIN));
+			(size_t) max(16 * 1024, (int)PTHREAD_STACK_MIN));
 	BUG_ON(err);
 	err = pthread_mutex_lock(&sched->start_work_mutex);
 	BUG_ON(err);

[PATCH 4.14 008/116] staging: iio: resolver: ads1210: fix config mode

[Greg Kroah-Hartman]

From: Nuno Sá <nuno.sa@analog.com>

commit 16313403d873ff17a587818b61f84c8cb4971cef upstream.

As stated in the device datasheet [1], bits a0 and a1 have to be set to
1 for the configuration mode.

[1]: https://www.analog.com/media/en/technical-documentation/data-sheets/ad2s1210.pdf

Fixes: b19e9ad5e2cb9 ("staging:iio:resolver:ad2s1210 general driver cleanup")
Cc: stable <stable@kernel.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20230327145414.1505537-1-nuno.sa@analog.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/iio/resolver/ad2s1210.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/iio/resolver/ad2s1210.c
+++ b/drivers/staging/iio/resolver/ad2s1210.c
@@ -96,7 +96,7 @@ struct ad2s1210_state {
 static const int ad2s1210_mode_vals[4][2] = {
 	[MOD_POS] = { 0, 0 },
 	[MOD_VEL] = { 0, 1 },
-	[MOD_CONFIG] = { 1, 0 },
+	[MOD_CONFIG] = { 1, 1 },
 };
 
 static inline void ad2s1210_set_mode(enum ad2s1210_mode mode,

[PATCH 4.14 009/116] MIPS: fw: Allow firmware to pass a empty env

[Greg Kroah-Hartman]

From: Jiaxun Yang <jiaxun.yang@flygoat.com>

commit ee1809ed7bc456a72dc8410b475b73021a3a68d5 upstream.

fw_getenv will use env entry to determine style of env,
however it is legal for firmware to just pass a empty list.

Check if first entry exist before running strchr to avoid
null pointer dereference.

Cc: stable@vger.kernel.org
Link: https://github.com/clbr/n64bootloader/issues/5
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/mips/fw/lib/cmdline.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/fw/lib/cmdline.c
+++ b/arch/mips/fw/lib/cmdline.c
@@ -51,7 +51,7 @@ char *fw_getenv(char *envname)
 {
 	char *result = NULL;
 
-	if (_fw_envp != NULL) {
+	if (_fw_envp != NULL && fw_envp(0) != NULL) {
 		/*
 		 * Return a pointer to the given environment variable.
 		 * YAMON uses "name", "value" pairs, while U-Boot uses

[PATCH 4.14 010/116] ring-buffer: Sync IRQ works before buffer destruction

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

commit 675751bb20634f981498c7d66161584080cc061e upstream.

If something was written to the buffer just before destruction,
it may be possible (maybe not in a real system, but it did
happen in ARCH=um with time-travel) to destroy the ringbuffer
before the IRQ work ran, leading this KASAN report (or a crash
without KASAN):

    BUG: KASAN: slab-use-after-free in irq_work_run_list+0x11a/0x13a
    Read of size 8 at addr 000000006d640a48 by task swapper/0

    CPU: 0 PID: 0 Comm: swapper Tainted: G        W  O       6.3.0-rc1 #7
    Stack:
     60c4f20f 0c203d48 41b58ab3 60f224fc
     600477fa 60f35687 60c4f20f 601273dd
     00000008 6101eb00 6101eab0 615be548
    Call Trace:
     [<60047a58>] show_stack+0x25e/0x282
     [<60c609e0>] dump_stack_lvl+0x96/0xfd
     [<60c50d4c>] print_report+0x1a7/0x5a8
     [<603078d3>] kasan_report+0xc1/0xe9
     [<60308950>] __asan_report_load8_noabort+0x1b/0x1d
     [<60232844>] irq_work_run_list+0x11a/0x13a
     [<602328b4>] irq_work_tick+0x24/0x34
     [<6017f9dc>] update_process_times+0x162/0x196
     [<6019f335>] tick_sched_handle+0x1a4/0x1c3
     [<6019fd9e>] tick_sched_timer+0x79/0x10c
     [<601812b9>] __hrtimer_run_queues.constprop.0+0x425/0x695
     [<60182913>] hrtimer_interrupt+0x16c/0x2c4
     [<600486a3>] um_timer+0x164/0x183
     [...]

    Allocated by task 411:
     save_stack_trace+0x99/0xb5
     stack_trace_save+0x81/0x9b
     kasan_save_stack+0x2d/0x54
     kasan_set_track+0x34/0x3e
     kasan_save_alloc_info+0x25/0x28
     ____kasan_kmalloc+0x8b/0x97
     __kasan_kmalloc+0x10/0x12
     __kmalloc+0xb2/0xe8
     load_elf_phdrs+0xee/0x182
     [...]

    The buggy address belongs to the object at 000000006d640800
     which belongs to the cache kmalloc-1k of size 1024
    The buggy address is located 584 bytes inside of
     freed 1024-byte region [000000006d640800, 000000006d640c00)

Add the appropriate irq_work_sync() so the work finishes before
the buffers are destroyed.

Prior to the commit in the Fixes tag below, there was only a
single global IRQ work, so this issue didn't exist.

Link: https://lore.kernel.org/linux-trace-kernel/20230427175920.a76159263122.I8295e405c44362a86c995e9c2c37e3e03810aa56@changeid

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 15693458c4bc ("tracing/ring-buffer: Move poll wake ups into ring buffer code")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/trace/ring_buffer.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -1269,6 +1269,8 @@ static void rb_free_cpu_buffer(struct ri
 	struct list_head *head = cpu_buffer->pages;
 	struct buffer_page *bpage, *tmp;
 
+	irq_work_sync(&cpu_buffer->irq_work.work);
+
 	free_buffer_page(cpu_buffer->reader_page);
 
 	if (head) {
@@ -1374,6 +1376,8 @@ ring_buffer_free(struct ring_buffer *buf
 
 	cpuhp_state_remove_instance(CPUHP_TRACE_RB_PREPARE, &buffer->node);
 
+	irq_work_sync(&buffer->irq_work.work);
+
 	for_each_buffer_cpu(buffer, cpu)
 		rb_free_cpu_buffer(buffer->buffers[cpu]);
 

[PATCH 4.14 011/116] reiserfs: Add security prefix to xattr name in reiserfs_security_write()

[Greg Kroah-Hartman]

From: Roberto Sassu <roberto.sassu@huawei.com>

commit d82dcd9e21b77d338dc4875f3d4111f0db314a7c upstream.

Reiserfs sets a security xattr at inode creation time in two stages: first,
it calls reiserfs_security_init() to obtain the xattr from active LSMs;
then, it calls reiserfs_security_write() to actually write that xattr.

Unfortunately, it seems there is a wrong expectation that LSMs provide the
full xattr name in the form 'security.<suffix>'. However, LSMs always
provided just the suffix, causing reiserfs to not write the xattr at all
(if the suffix is shorter than the prefix), or to write an xattr with the
wrong name.

Add a temporary buffer in reiserfs_security_write(), and write to it the
full xattr name, before passing it to reiserfs_xattr_set_handle().

Also replace the name length check with a check that the full xattr name is
not larger than XATTR_NAME_MAX.

Cc: stable@vger.kernel.org # v2.6.x
Fixes: 57fe60df6241 ("reiserfs: add atomic addition of selinux attributes during inode creation")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/reiserfs/xattr_security.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/fs/reiserfs/xattr_security.c
+++ b/fs/reiserfs/xattr_security.c
@@ -81,11 +81,15 @@ int reiserfs_security_write(struct reise
 			    struct inode *inode,
 			    struct reiserfs_security_handle *sec)
 {
+	char xattr_name[XATTR_NAME_MAX + 1] = XATTR_SECURITY_PREFIX;
 	int error;
-	if (strlen(sec->name) < sizeof(XATTR_SECURITY_PREFIX))
+
+	if (XATTR_SECURITY_PREFIX_LEN + strlen(sec->name) > XATTR_NAME_MAX)
 		return -EINVAL;
 
-	error = reiserfs_xattr_set_handle(th, inode, sec->name, sec->value,
+	strlcat(xattr_name, sec->name, sizeof(xattr_name));
+
+	error = reiserfs_xattr_set_handle(th, inode, xattr_name, sec->value,
 					  sec->length, XATTR_CREATE);
 	if (error == -ENODATA || error == -EOPNOTSUPP)
 		error = 0;

[PATCH 4.14 012/116] i2c: omap: Fix standard mode false ACK readings

[Greg Kroah-Hartman]

From: Reid Tonking <reidt@ti.com>

commit c770657bd2611b077ec1e7b1fe6aa92f249399bd upstream.

Using standard mode, rare false ACK responses were appearing with
i2cdetect tool. This was happening due to NACK interrupt triggering
ISR thread before register access interrupt was ready. Removing the
NACK interrupt's ability to trigger ISR thread lets register access
ready interrupt do this instead.

Cc: <stable@vger.kernel.org> # v3.7+
Fixes: 3b2f8f82dad7 ("i2c: omap: switch to threaded IRQ support")
Signed-off-by: Reid Tonking <reidt@ti.com>
Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/busses/i2c-omap.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1030,7 +1030,7 @@ omap_i2c_isr(int irq, void *dev_id)
 	u16 stat;
 
 	stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG);
-	mask = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG);
+	mask = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG) & ~OMAP_I2C_STAT_NACK;
 
 	if (stat & mask)
 		ret = IRQ_WAKE_THREAD;

[PATCH 4.14 013/116] Revert "ubifs: dirty_cow_znode: Fix memleak in error handling path"

[Greg Kroah-Hartman]

From: Zhihao Cheng <chengzhihao1@huawei.com>

commit 7d01cb27f6aebc54efbe28d8961a973b8f795b13 upstream.

This reverts commit 122deabfe1428 (ubifs: dirty_cow_znode: Fix memleak
in error handling path).
After commit 122deabfe1428 applied, if insert_old_idx() failed, old
index neither exists in TNC nor in old-index tree. Which means that
old index node could be overwritten in layout_leb_in_gaps(), then
ubifs image will be corrupted in power-cut.

Fixes: 122deabfe1428 (ubifs: dirty_cow_znode: Fix memleak ... path)
Cc: stable@vger.kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ubifs/tnc.c |    9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

--- a/fs/ubifs/tnc.c
+++ b/fs/ubifs/tnc.c
@@ -279,18 +279,11 @@ static struct ubifs_znode *dirty_cow_zno
 	if (zbr->len) {
 		err = insert_old_idx(c, zbr->lnum, zbr->offs);
 		if (unlikely(err))
-			/*
-			 * Obsolete znodes will be freed by tnc_destroy_cnext()
-			 * or free_obsolete_znodes(), copied up znodes should
-			 * be added back to tnc and freed by
-			 * ubifs_destroy_tnc_subtree().
-			 */
-			goto out;
+			return ERR_PTR(err);
 		err = add_idx_dirt(c, zbr->lnum, zbr->len);
 	} else
 		err = 0;
 
-out:
 	zbr->znode = zn;
 	zbr->lnum = 0;
 	zbr->offs = 0;

[PATCH 4.14 014/116] ubi: Fix return value overwrite issue in try_write_vid_and_data()

[Greg Kroah-Hartman]

From: Wang YanQing <udknight@gmail.com>

commit 31a149d5c13c4cbcf97de3435817263a2d8c9d6e upstream.

The commit 2d78aee426d8 ("UBI: simplify LEB write and atomic LEB change code")
adds helper function, try_write_vid_and_data(), to simplify the code, but this
helper function has bug, it will return 0 (success) when ubi_io_write_vid_hdr()
or the ubi_io_write_data() return error number (-EIO, etc), because the return
value of ubi_wl_put_peb() will overwrite the original return value.

This issue will cause unexpected data loss issue, because the caller of this
function and UBIFS willn't know the data is lost.

Fixes: 2d78aee426d8 ("UBI: simplify LEB write and atomic LEB change code")
Cc: stable@vger.kernel.org
Signed-off-by: Wang YanQing <udknight@gmail.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mtd/ubi/eba.c |   19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -943,7 +943,7 @@ static int try_write_vid_and_data(struct
 				  int offset, int len)
 {
 	struct ubi_device *ubi = vol->ubi;
-	int pnum, opnum, err, vol_id = vol->vol_id;
+	int pnum, opnum, err, err2, vol_id = vol->vol_id;
 
 	pnum = ubi_wl_get_peb(ubi);
 	if (pnum < 0) {
@@ -978,10 +978,19 @@ static int try_write_vid_and_data(struct
 out_put:
 	up_read(&ubi->fm_eba_sem);
 
-	if (err && pnum >= 0)
-		err = ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 1);
-	else if (!err && opnum >= 0)
-		err = ubi_wl_put_peb(ubi, vol_id, lnum, opnum, 0);
+	if (err && pnum >= 0) {
+		err2 = ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 1);
+		if (err2) {
+			ubi_warn(ubi, "failed to return physical eraseblock %d, error %d",
+				 pnum, err2);
+		}
+	} else if (!err && opnum >= 0) {
+		err2 = ubi_wl_put_peb(ubi, vol_id, lnum, opnum, 0);
+		if (err2) {
+			ubi_warn(ubi, "failed to return physical eraseblock %d, error %d",
+				 opnum, err2);
+		}
+	}
 
 	return err;
 }

[PATCH 4.14 015/116] ubifs: Free memory for tmpfile name

[Greg Kroah-Hartman]

From: Mårten Lindahl <marten.lindahl@axis.com>

commit 1fb815b38bb31d6af9bd0540b8652a0d6fe6cfd3 upstream.

When opening a ubifs tmpfile on an encrypted directory, function
fscrypt_setup_filename allocates memory for the name that is to be
stored in the directory entry, but after the name has been copied to the
directory entry inode, the memory is not freed.

When running kmemleak on it we see that it is registered as a leak. The
report below is triggered by a simple program 'tmpfile' just opening a
tmpfile:

  unreferenced object 0xffff88810178f380 (size 32):
    comm "tmpfile", pid 509, jiffies 4294934744 (age 1524.742s)
    backtrace:
      __kmem_cache_alloc_node
      __kmalloc
      fscrypt_setup_filename
      ubifs_tmpfile
      vfs_tmpfile
      path_openat

Free this memory after it has been copied to the inode.

Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ubifs/dir.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/ubifs/dir.c
+++ b/fs/ubifs/dir.c
@@ -462,6 +462,7 @@ static int do_tmpfile(struct inode *dir,
 	mutex_unlock(&dir_ui->ui_mutex);
 
 	ubifs_release_budget(c, &req);
+	fscrypt_free_filename(&nm);
 
 	return 0;
 

[PATCH 4.14 016/116] selinux: fix Makefile dependencies of flask.h

[Greg Kroah-Hartman]

From: Ondrej Mosnacek <omosnace@redhat.com>

[ Upstream commit bcab1adeaad4b39a1e04cb98979a367d08253f03 ]

Make the flask.h target depend on the genheaders binary instead of
classmap.h to ensure that it is rebuilt if any of the dependencies of
genheaders are changed.

Notably this fixes flask.h not being rebuilt when
initial_sid_to_string.h is modified.

Fixes: 8753f6bec352 ("selinux: generate flask headers during kernel build")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/selinux/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/security/selinux/Makefile b/security/selinux/Makefile
index c7161f8792b2d..3efb0dda95b55 100644
--- a/security/selinux/Makefile
+++ b/security/selinux/Makefile
@@ -19,8 +19,8 @@ ccflags-y := -I$(srctree)/security/selinux -I$(srctree)/security/selinux/include
 $(addprefix $(obj)/,$(selinux-y)): $(obj)/flask.h
 
 quiet_cmd_flask = GEN     $(obj)/flask.h $(obj)/av_permissions.h
-      cmd_flask = scripts/selinux/genheaders/genheaders $(obj)/flask.h $(obj)/av_permissions.h
+      cmd_flask = $< $(obj)/flask.h $(obj)/av_permissions.h
 
 targets += flask.h av_permissions.h
-$(obj)/flask.h: $(src)/include/classmap.h FORCE
+$(obj)/flask.h: scripts/selinux/genheaders/genheaders FORCE
 	$(call if_changed,flask)
-- 
2.39.2

[PATCH 4.14 017/116] selinux: ensure av_permissions.h is built when needed

[Greg Kroah-Hartman]

From: Paul Moore <paul@paul-moore.com>

[ Upstream commit 4ce1f694eb5d8ca607fed8542d32a33b4f1217a5 ]

The Makefile rule responsible for building flask.h and
av_permissions.h only lists flask.h as a target which means that
av_permissions.h is only generated when flask.h needs to be
generated.  This patch fixes this by adding av_permissions.h as a
target to the rule.

Fixes: 8753f6bec352 ("selinux: generate flask headers during kernel build")
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/selinux/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/security/selinux/Makefile b/security/selinux/Makefile
index 3efb0dda95b55..08ba8ca81d403 100644
--- a/security/selinux/Makefile
+++ b/security/selinux/Makefile
@@ -22,5 +22,5 @@ quiet_cmd_flask = GEN     $(obj)/flask.h $(obj)/av_permissions.h
       cmd_flask = $< $(obj)/flask.h $(obj)/av_permissions.h
 
 targets += flask.h av_permissions.h
-$(obj)/flask.h: scripts/selinux/genheaders/genheaders FORCE
+$(obj)/flask.h $(obj)/av_permissions.h &: scripts/selinux/genheaders/genheaders FORCE
 	$(call if_changed,flask)
-- 
2.39.2

[PATCH 4.14 018/116] drm/rockchip: Drop unbalanced obj unref

[Greg Kroah-Hartman]

From: Rob Clark <robdclark@chromium.org>

[ Upstream commit 8ee3b0e85f6ccd9e6c527bc50eaba774c3bb18d0 ]

In the error path, rockchip_drm_gem_object_mmap() is dropping an obj
reference that it doesn't own.

Fixes: 41315b793e13 ("drm/rockchip: use drm_gem_mmap helpers")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230119231734.2884543-1-robdclark@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/rockchip/rockchip_drm_gem.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_gem.c b/drivers/gpu/drm/rockchip/rockchip_drm_gem.c
index bde65186a3c37..8ba3a682dd9ad 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_gem.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_gem.c
@@ -268,9 +268,6 @@ static int rockchip_drm_gem_object_mmap(struct drm_gem_object *obj,
 	else
 		ret = rockchip_drm_gem_object_mmap_dma(obj, vma);
 
-	if (ret)
-		drm_gem_vm_close(vma);
-
 	return ret;
 }
 
-- 
2.39.2

[PATCH 4.14 019/116] drm/vgem: add missing mutex_destroy

[Greg Kroah-Hartman]

From: Maíra Canal <mcanal@igalia.com>

[ Upstream commit 7c18189b14b33c1fbf76480b1bd217877c086e67 ]

vgem_fence_open() instantiates a mutex for a particular fence
instance, but never destroys it by calling mutex_destroy() in
vgem_fence_close().

So, add the missing mutex_destroy() to guarantee proper resource
destruction.

Fixes: 407779848445 ("drm/vgem: Attach sw fences to exported vGEM dma-buf (ioctl)")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202125517.427976-1-mcanal@igalia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/vgem/vgem_fence.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/vgem/vgem_fence.c b/drivers/gpu/drm/vgem/vgem_fence.c
index 8fd52f211e9d9..673db9bf3c5d1 100644
--- a/drivers/gpu/drm/vgem/vgem_fence.c
+++ b/drivers/gpu/drm/vgem/vgem_fence.c
@@ -280,4 +280,5 @@ void vgem_fence_close(struct vgem_file *vfile)
 {
 	idr_for_each(&vfile->fence_idr, __vgem_fence_idr_fini, vfile);
 	idr_destroy(&vfile->fence_idr);
+	mutex_destroy(&vfile->fence_mutex);
 }
-- 
2.39.2

[PATCH 4.14 020/116] drm/probe-helper: Cancel previous job before starting new one

[Greg Kroah-Hartman]

From: Dom Cobley <popcornmix@gmail.com>

[ Upstream commit a8e47884f1906cd7440fafa056adc8817568e73e ]

Currently we schedule a call to output_poll_execute from
drm_kms_helper_poll_enable for 10s in future. Later we try to replace
that in drm_helper_probe_single_connector_modes with a 0s schedule with
delayed_event set.

But as there is already a job in the queue this fails, and the immediate
job we wanted with delayed_event set doesn't occur until 10s later.

And that call acts as if connector state has changed, reprobing modes.
This has a side effect of waking up a display that has been blanked.

Make sure we cancel the old job before submitting the immediate one.

Fixes: 162b6a57ac50 ("drm/probe-helper: don't lose hotplug event")
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
[Maxime: Switched to mod_delayed_work]
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127154052.452524-1-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_probe_helper.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index adbabf16c07b2..f76eced3ff94f 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -465,8 +465,9 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
 		 */
 		dev->mode_config.delayed_event = true;
 		if (dev->mode_config.poll_enabled)
-			schedule_delayed_work(&dev->mode_config.output_poll_work,
-					      0);
+			mod_delayed_work(system_wq,
+					 &dev->mode_config.output_poll_work,
+					 0);
 	}
 
 	/* Re-enable polling in case the global poll config changed. */
-- 
2.39.2

[PATCH 4.14 021/116] media: bdisp: Add missing check for create_workqueue

[Greg Kroah-Hartman]

From: Jiasheng Jiang <jiasheng@iscas.ac.cn>

[ Upstream commit 2371adeab717d8fe32144a84f3491a03c5838cfb ]

Add the check for the return value of the create_workqueue
in order to avoid NULL pointer dereference.

Fixes: 28ffeebbb7bd ("[media] bdisp: 2D blitter driver using v4l2 mem2mem framework")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/sti/bdisp/bdisp-v4l2.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/media/platform/sti/bdisp/bdisp-v4l2.c b/drivers/media/platform/sti/bdisp/bdisp-v4l2.c
index 79de7d413cf5e..d7432e0e3e6e1 100644
--- a/drivers/media/platform/sti/bdisp/bdisp-v4l2.c
+++ b/drivers/media/platform/sti/bdisp/bdisp-v4l2.c
@@ -1308,6 +1308,8 @@ static int bdisp_probe(struct platform_device *pdev)
 	init_waitqueue_head(&bdisp->irq_queue);
 	INIT_DELAYED_WORK(&bdisp->timeout_work, bdisp_irq_timeout);
 	bdisp->work_queue = create_workqueue(BDISP_NAME);
+	if (!bdisp->work_queue)
+		return -ENOMEM;
 
 	spin_lock_init(&bdisp->slock);
 	mutex_init(&bdisp->lock);
-- 
2.39.2

[PATCH 4.14 022/116] media: av7110: prevent underflow in write_ts_to_decoder()

[Greg Kroah-Hartman]

From: Dan Carpenter <error27@gmail.com>

[ Upstream commit eed9496a0501357aa326ddd6b71408189ed872eb ]

The buf[4] value comes from the user via ts_play().  It is a value in
the u8 range.  The final length we pass to av7110_ipack_instant_repack()
is "len - (buf[4] + 1) - 4" so add a check to ensure that the length is
not negative.  It's not clear that passing a negative len value does
anything bad necessarily, but it's not best practice.

With the new bounds checking the "if (!len)" condition is no longer
possible or required so remove that.

Fixes: fd46d16d602a ("V4L/DVB (11759): dvb-ttpci: Add TS replay capability")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/ttpci/av7110_av.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/pci/ttpci/av7110_av.c b/drivers/media/pci/ttpci/av7110_av.c
index 2aa4ba675194e..43b780aadf5fe 100644
--- a/drivers/media/pci/ttpci/av7110_av.c
+++ b/drivers/media/pci/ttpci/av7110_av.c
@@ -836,10 +836,10 @@ static int write_ts_to_decoder(struct av7110 *av7110, int type, const u8 *buf, s
 		av7110_ipack_flush(ipack);
 
 	if (buf[3] & ADAPT_FIELD) {
+		if (buf[4] > len - 1 - 4)
+			return 0;
 		len -= buf[4] + 1;
 		buf += buf[4] + 1;
-		if (!len)
-			return 0;
 	}
 
 	av7110_ipack_instant_repack(buf + 4, len - 4, ipack);
-- 
2.39.2

[PATCH 4.14 023/116] x86/apic: Fix atomic update of offset in reserve_eilvt_offset()

[Greg Kroah-Hartman]

From: Uros Bizjak <ubizjak@gmail.com>

[ Upstream commit f96fb2df3eb31ede1b34b0521560967310267750 ]

The detection of atomic update failure in reserve_eilvt_offset() is
not correct. The value returned by atomic_cmpxchg() should be compared
to the old value from the location to be updated.

If these two are the same, then atomic update succeeded and
"eilvt_offsets[offset]" location is updated to "new" in an atomic way.

Otherwise, the atomic update failed and it should be retried with the
value from "eilvt_offsets[offset]" - exactly what atomic_try_cmpxchg()
does in a correct and more optimal way.

Fixes: a68c439b1966c ("apic, x86: Check if EILVT APIC registers are available (AMD only)")
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230227160917.107820-1-ubizjak@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/apic/apic.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 488e0853a44df..c3a4eeabe7534 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -411,10 +411,9 @@ static unsigned int reserve_eilvt_offset(int offset, unsigned int new)
 		if (vector && !eilvt_entry_is_changeable(vector, new))
 			/* may not change if vectors are different */
 			return rsvd;
-		rsvd = atomic_cmpxchg(&eilvt_offsets[offset], rsvd, new);
-	} while (rsvd != new);
+	} while (!atomic_try_cmpxchg(&eilvt_offsets[offset], &rsvd, new));
 
-	rsvd &= ~APIC_EILVT_MASKED;
+	rsvd = new & ~APIC_EILVT_MASKED;
 	if (rsvd && rsvd != vector)
 		pr_info("LVT offset %d assigned for vector 0x%02x\n",
 			offset, rsvd);
-- 
2.39.2

[PATCH 4.14 024/116] media: dm1105: Fix use after free bug in dm1105_remove due to race condition

[Greg Kroah-Hartman]

From: Zheng Wang <zyytlz.wz@163.com>

[ Upstream commit 5abda7a16698d4d1f47af1168d8fa2c640116b4a ]

In dm1105_probe, it called dm1105_ir_init and bound
&dm1105->ir.work with dm1105_emit_key.
When it handles IRQ request with dm1105_irq,
it may call schedule_work to start the work.

When we call dm1105_remove to remove the driver, there
may be a sequence as follows:

Fix it by finishing the work before cleanup in dm1105_remove

CPU0                  CPU1

                    |dm1105_emit_key
dm1105_remove      |
  dm1105_ir_exit       |
    rc_unregister_device |
    rc_free_device  |
    rc_dev_release  |
    kfree(dev);     |
                    |
                    | rc_keydown
                    |   //use

Fixes: 34d2f9bf189c ("V4L/DVB: dm1105: use dm1105_dev & dev instead of dm1105dvb")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/dm1105/dm1105.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/pci/dm1105/dm1105.c b/drivers/media/pci/dm1105/dm1105.c
index 7c3900dec3686..df08297911546 100644
--- a/drivers/media/pci/dm1105/dm1105.c
+++ b/drivers/media/pci/dm1105/dm1105.c
@@ -1185,6 +1185,7 @@ static void dm1105_remove(struct pci_dev *pdev)
 	struct dvb_demux *dvbdemux = &dev->demux;
 	struct dmx_demux *dmx = &dvbdemux->dmx;
 
+	cancel_work_sync(&dev->ir.work);
 	dm1105_ir_exit(dev);
 	dmx->close(dmx);
 	dvb_net_release(&dev->dvbnet);
-- 
2.39.2

[PATCH 4.14 025/116] x86/ioapic: Dont return 0 from arch_dynirq_lower_bound()

[Greg Kroah-Hartman]

From: Saurabh Sengar <ssengar@linux.microsoft.com>

[ Upstream commit 5af507bef93c09a94fb8f058213b489178f4cbe5 ]

arch_dynirq_lower_bound() is invoked by the core interrupt code to
retrieve the lowest possible Linux interrupt number for dynamically
allocated interrupts like MSI.

The x86 implementation uses this to exclude the IO/APIC GSI space.
This works correctly as long as there is an IO/APIC registered, but
returns 0 if not. This has been observed in VMs where the BIOS does
not advertise an IO/APIC.

0 is an invalid interrupt number except for the legacy timer interrupt
on x86. The return value is unchecked in the core code, so it ends up
to allocate interrupt number 0 which is subsequently considered to be
invalid by the caller, e.g. the MSI allocation code.

The function has already a check for 0 in the case that an IO/APIC is
registered, as ioapic_dynirq_base is 0 in case of device tree setups.

Consolidate this and zero check for both ioapic_dynirq_base and gsi_top,
which is used in the case that no IO/APIC is registered.

Fixes: 3e5bedc2c258 ("x86/apic: Fix arch_dynirq_lower_bound() bug for DT enabled machines")
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/1679988604-20308-1-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/apic/io_apic.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index de74bca6a8ff6..1cceb30357aaf 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -2357,17 +2357,21 @@ static int io_apic_get_redir_entries(int ioapic)
 
 unsigned int arch_dynirq_lower_bound(unsigned int from)
 {
+	unsigned int ret;
+
 	/*
 	 * dmar_alloc_hwirq() may be called before setup_IO_APIC(), so use
 	 * gsi_top if ioapic_dynirq_base hasn't been initialized yet.
 	 */
-	if (!ioapic_initialized)
-		return gsi_top;
+	ret = ioapic_dynirq_base ? : gsi_top;
+
 	/*
-	 * For DT enabled machines ioapic_dynirq_base is irrelevant and not
-	 * updated. So simply return @from if ioapic_dynirq_base == 0.
+	 * For DT enabled machines ioapic_dynirq_base is irrelevant and
+	 * always 0. gsi_top can be 0 if there is no IO/APIC registered.
+	 * 0 is an invalid interrupt number for dynamic allocations. Return
+	 * @from instead.
 	 */
-	return ioapic_dynirq_base ? : from;
+	return ret ? : from;
 }
 
 #ifdef CONFIG_X86_32
-- 
2.39.2

[PATCH 4.14 026/116] arm64: kgdb: Set PSTATE.SS to 1 to re-enable single-step

[Greg Kroah-Hartman]

From: Sumit Garg <sumit.garg@linaro.org>

[ Upstream commit af6c0bd59f4f3ad5daad2f7b777954b1954551d5 ]

Currently only the first attempt to single-step has any effect. After
that all further stepping remains "stuck" at the same program counter
value.

Refer to the ARM Architecture Reference Manual (ARM DDI 0487E.a) D2.12,
PSTATE.SS=1 should be set at each step before transferring the PE to the
'Active-not-pending' state. The problem here is PSTATE.SS=1 is not set
since the second single-step.

After the first single-step, the PE transferes to the 'Inactive' state,
with PSTATE.SS=0 and MDSCR.SS=1, thus PSTATE.SS won't be set to 1 due to
kernel_active_single_step()=true. Then the PE transferes to the
'Active-pending' state when ERET and returns to the debugger by step
exception.

Before this patch:
==================
Entering kdb (current=0xffff3376039f0000, pid 1) on processor 0 due to Keyboard Entry
[0]kdb>

[0]kdb>
[0]kdb> bp write_sysrq_trigger
Instruction(i) BP #0 at 0xffffa45c13d09290 (write_sysrq_trigger)
    is enabled   addr at ffffa45c13d09290, hardtype=0 installed=0

[0]kdb> go
$ echo h > /proc/sysrq-trigger

Entering kdb (current=0xffff4f7e453f8000, pid 175) on processor 1 due to Breakpoint @ 0xffffad651a309290
[1]kdb> ss

Entering kdb (current=0xffff4f7e453f8000, pid 175) on processor 1 due to SS trap @ 0xffffad651a309294
[1]kdb> ss

Entering kdb (current=0xffff4f7e453f8000, pid 175) on processor 1 due to SS trap @ 0xffffad651a309294
[1]kdb>

After this patch:
=================
Entering kdb (current=0xffff6851c39f0000, pid 1) on processor 0 due to Keyboard Entry
[0]kdb> bp write_sysrq_trigger
Instruction(i) BP #0 at 0xffffc02d2dd09290 (write_sysrq_trigger)
    is enabled   addr at ffffc02d2dd09290, hardtype=0 installed=0

[0]kdb> go
$ echo h > /proc/sysrq-trigger

Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to Breakpoint @ 0xffffc02d2dd09290
[1]kdb> ss

Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to SS trap @ 0xffffc02d2dd09294
[1]kdb> ss

Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to SS trap @ 0xffffc02d2dd09298
[1]kdb> ss

Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to SS trap @ 0xffffc02d2dd0929c
[1]kdb>

Fixes: 44679a4f142b ("arm64: KGDB: Add step debugging support")
Co-developed-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20230202073148.657746-3-sumit.garg@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/debug-monitors.h | 1 +
 arch/arm64/kernel/debug-monitors.c      | 5 +++++
 arch/arm64/kernel/kgdb.c                | 2 ++
 3 files changed, 8 insertions(+)

diff --git a/arch/arm64/include/asm/debug-monitors.h b/arch/arm64/include/asm/debug-monitors.h
index 41b065f1be88c..13630e8078ff4 100644
--- a/arch/arm64/include/asm/debug-monitors.h
+++ b/arch/arm64/include/asm/debug-monitors.h
@@ -125,6 +125,7 @@ void user_regs_reset_single_step(struct user_pt_regs *regs,
 void kernel_enable_single_step(struct pt_regs *regs);
 void kernel_disable_single_step(void);
 int kernel_active_single_step(void);
+void kernel_rewind_single_step(struct pt_regs *regs);
 
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
 int reinstall_suspended_bps(struct pt_regs *regs);
diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c
index 2ccd0a99d8b35..970ce09078873 100644
--- a/arch/arm64/kernel/debug-monitors.c
+++ b/arch/arm64/kernel/debug-monitors.c
@@ -434,6 +434,11 @@ int kernel_active_single_step(void)
 }
 NOKPROBE_SYMBOL(kernel_active_single_step);
 
+void kernel_rewind_single_step(struct pt_regs *regs)
+{
+	set_regs_spsr_ss(regs);
+}
+
 /* ptrace API */
 void user_enable_single_step(struct task_struct *task)
 {
diff --git a/arch/arm64/kernel/kgdb.c b/arch/arm64/kernel/kgdb.c
index 7fd7a9cd86161..05790fce1a854 100644
--- a/arch/arm64/kernel/kgdb.c
+++ b/arch/arm64/kernel/kgdb.c
@@ -223,6 +223,8 @@ int kgdb_arch_handle_exception(int exception_vector, int signo,
 		 */
 		if (!kernel_active_single_step())
 			kernel_enable_single_step(linux_regs);
+		else
+			kernel_rewind_single_step(linux_regs);
 		err = 0;
 		break;
 	default:
-- 
2.39.2

[PATCH 4.14 027/116] wifi: ath6kl: minor fix for allocation size

[Greg Kroah-Hartman]

From: Alexey V. Vissarionov <gremlin@altlinux.org>

[ Upstream commit 778f83f889e7fca37780d9640fcbd0229ae38eaa ]

Although the "param" pointer occupies more or equal space compared
to "*param", the allocation size should use the size of variable
itself.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: bdcd81707973cf8a ("Add ath6kl cleaned up driver")
Signed-off-by: Alexey V. Vissarionov <gremlin@altlinux.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230117110414.GC12547@altlinux.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath6kl/bmi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath6kl/bmi.c b/drivers/net/wireless/ath/ath6kl/bmi.c
index 334dbd834b3a6..8380ee76bdde7 100644
--- a/drivers/net/wireless/ath/ath6kl/bmi.c
+++ b/drivers/net/wireless/ath/ath6kl/bmi.c
@@ -246,7 +246,7 @@ int ath6kl_bmi_execute(struct ath6kl *ar, u32 addr, u32 *param)
 		return -EACCES;
 	}
 
-	size = sizeof(cid) + sizeof(addr) + sizeof(param);
+	size = sizeof(cid) + sizeof(addr) + sizeof(*param);
 	if (size > ar->bmi.max_cmd_size) {
 		WARN_ON(1);
 		return -EINVAL;
-- 
2.39.2

[PATCH 4.14 028/116] wifi: ath5k: fix an off by one check in ath5k_eeprom_read_freq_list()

[Greg Kroah-Hartman]

From: Dan Carpenter <error27@gmail.com>

[ Upstream commit 4c856ee12df85aabd437c3836ed9f68d94268358 ]

This loop checks that i < max at the start of loop but then it does
i++ which could put it past the end of the array.  It's harmless to
check again and prevent a potential out of bounds.

Fixes: 1048643ea94d ("ath5k: Clean up eeprom parsing and add missing calibration data")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/Y+D9hPQrHfWBJhXz@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath5k/eeprom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index 01163b3339451..92f5c8e830901 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -529,7 +529,7 @@ ath5k_eeprom_read_freq_list(struct ath5k_hw *ah, int *offset, int max,
 		ee->ee_n_piers[mode]++;
 
 		freq2 = (val >> 8) & 0xff;
-		if (!freq2)
+		if (!freq2 || i >= max)
 			break;
 
 		pc[i++].freq = ath5k_eeprom_bin2freq(ee,
-- 
2.39.2

[PATCH 4.14 029/116] wifi: ath6kl: reduce WARN to dev_dbg() in callback

[Greg Kroah-Hartman]

From: Fedor Pchelkin <pchelkin@ispras.ru>

[ Upstream commit 75c4a8154cb6c7239fb55d5550f481f6765fb83c ]

The warn is triggered on a known race condition, documented in the code above
the test, that is correctly handled.  Using WARN() hinders automated testing.
Reducing severity.

Fixes: de2070fc4aa7 ("ath6kl: Fix kernel panic on continuous driver load/unload")
Reported-and-tested-by: syzbot+555908813b2ea35dae9a@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230126182431.867984-1-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath6kl/htc_pipe.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath6kl/htc_pipe.c b/drivers/net/wireless/ath/ath6kl/htc_pipe.c
index 546243e117379..634cde696272c 100644
--- a/drivers/net/wireless/ath/ath6kl/htc_pipe.c
+++ b/drivers/net/wireless/ath/ath6kl/htc_pipe.c
@@ -969,8 +969,8 @@ static int ath6kl_htc_pipe_rx_complete(struct ath6kl *ar, struct sk_buff *skb,
 	 * Thus the possibility of ar->htc_target being NULL
 	 * via ath6kl_recv_complete -> ath6kl_usb_io_comp_work.
 	 */
-	if (WARN_ON_ONCE(!target)) {
-		ath6kl_err("Target not yet initialized\n");
+	if (!target) {
+		ath6kl_dbg(ATH6KL_DBG_HTC, "Target not yet initialized\n");
 		status = -EINVAL;
 		goto free_skb;
 	}
-- 
2.39.2

[PATCH 4.14 030/116] scm: fix MSG_CTRUNC setting condition for SO_PASSSEC

[Greg Kroah-Hartman]

From: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>

[ Upstream commit a02d83f9947d8f71904eda4de046630c3eb6802c ]

Currently, kernel would set MSG_CTRUNC flag if msg_control buffer
wasn't provided and SO_PASSCRED was set or if there was pending SCM_RIGHTS.

For some reason we have no corresponding check for SO_PASSSEC.

In the recvmsg(2) doc we have:
       MSG_CTRUNC
              indicates that some control data was discarded due to lack
              of space in the buffer for ancillary data.

So, we need to set MSG_CTRUNC flag for all types of SCM.

This change can break applications those don't check MSG_CTRUNC flag.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Leon Romanovsky <leon@kernel.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>

v2:
- commit message was rewritten according to Eric's suggestion
Acked-by: Paul Moore <paul@paul-moore.com>

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/scm.h | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/include/net/scm.h b/include/net/scm.h
index 903771c8d4e33..1268a051f1aa2 100644
--- a/include/net/scm.h
+++ b/include/net/scm.h
@@ -104,16 +104,27 @@ static inline void scm_passec(struct socket *sock, struct msghdr *msg, struct sc
 		}
 	}
 }
+
+static inline bool scm_has_secdata(struct socket *sock)
+{
+	return test_bit(SOCK_PASSSEC, &sock->flags);
+}
 #else
 static inline void scm_passec(struct socket *sock, struct msghdr *msg, struct scm_cookie *scm)
 { }
+
+static inline bool scm_has_secdata(struct socket *sock)
+{
+	return false;
+}
 #endif /* CONFIG_SECURITY_NETWORK */
 
 static __inline__ void scm_recv(struct socket *sock, struct msghdr *msg,
 				struct scm_cookie *scm, int flags)
 {
 	if (!msg->msg_control) {
-		if (test_bit(SOCK_PASSCRED, &sock->flags) || scm->fp)
+		if (test_bit(SOCK_PASSCRED, &sock->flags) || scm->fp ||
+		    scm_has_secdata(sock))
 			msg->msg_flags |= MSG_CTRUNC;
 		scm_destroy(scm);
 		return;
-- 
2.39.2

[PATCH 4.14 031/116] vlan: partially enable SIOCSHWTSTAMP in container

[Greg Kroah-Hartman]

From: Vadim Fedorenko <vadim.fedorenko@linux.dev>

[ Upstream commit 731b73dba359e3ff00517c13aa0daa82b34ff466 ]

Setting timestamp filter was explicitly disabled on vlan devices in
containers because it might affect other processes on the host. But it's
absolutely legit in case when real device is in the same namespace.

Fixes: 873017af7784 ("vlan: disable SIOCSHWTSTAMP in container")
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/8021q/vlan_dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index ed3717dc2d201..e871d3b27c479 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -367,7 +367,7 @@ static int vlan_dev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 
 	switch (cmd) {
 	case SIOCSHWTSTAMP:
-		if (!net_eq(dev_net(dev), &init_net))
+		if (!net_eq(dev_net(dev), dev_net(real_dev)))
 			break;
 	case SIOCGMIIPHY:
 	case SIOCGMIIREG:
-- 
2.39.2

[PATCH 4.14 032/116] net/packet: convert po->origdev to an atomic flag

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit ee5675ecdf7a4e713ed21d98a70c2871d6ebed01 ]

syzbot/KCAN reported that po->origdev can be read
while another thread is changing its value.

We can avoid this splat by converting this field
to an actual bit.

Following patches will convert remaining 1bit fields.

Fixes: 80feaacb8a64 ("[AF_PACKET]: Add option to return orig_dev to userspace.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/packet/af_packet.c | 10 ++++------
 net/packet/diag.c      |  2 +-
 net/packet/internal.h  | 22 +++++++++++++++++++++-
 3 files changed, 26 insertions(+), 8 deletions(-)

diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 1be5fb6af0178..ce6afdb50933b 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -2144,7 +2144,7 @@ static int packet_rcv(struct sk_buff *skb, struct net_device *dev,
 	sll = &PACKET_SKB_CB(skb)->sa.ll;
 	sll->sll_hatype = dev->type;
 	sll->sll_pkttype = skb->pkt_type;
-	if (unlikely(po->origdev))
+	if (unlikely(packet_sock_flag(po, PACKET_SOCK_ORIGDEV)))
 		sll->sll_ifindex = orig_dev->ifindex;
 	else
 		sll->sll_ifindex = dev->ifindex;
@@ -2410,7 +2410,7 @@ static int tpacket_rcv(struct sk_buff *skb, struct net_device *dev,
 	sll->sll_hatype = dev->type;
 	sll->sll_protocol = skb->protocol;
 	sll->sll_pkttype = skb->pkt_type;
-	if (unlikely(po->origdev))
+	if (unlikely(packet_sock_flag(po, PACKET_SOCK_ORIGDEV)))
 		sll->sll_ifindex = orig_dev->ifindex;
 	else
 		sll->sll_ifindex = dev->ifindex;
@@ -3879,9 +3879,7 @@ packet_setsockopt(struct socket *sock, int level, int optname, char __user *optv
 		if (copy_from_user(&val, optval, sizeof(val)))
 			return -EFAULT;
 
-		lock_sock(sk);
-		po->origdev = !!val;
-		release_sock(sk);
+		packet_sock_flag_set(po, PACKET_SOCK_ORIGDEV, val);
 		return 0;
 	}
 	case PACKET_VNET_HDR:
@@ -4014,7 +4012,7 @@ static int packet_getsockopt(struct socket *sock, int level, int optname,
 		val = po->auxdata;
 		break;
 	case PACKET_ORIGDEV:
-		val = po->origdev;
+		val = packet_sock_flag(po, PACKET_SOCK_ORIGDEV);
 		break;
 	case PACKET_VNET_HDR:
 		val = po->has_vnet_hdr;
diff --git a/net/packet/diag.c b/net/packet/diag.c
index 7ef1c881ae741..bf5928e5df035 100644
--- a/net/packet/diag.c
+++ b/net/packet/diag.c
@@ -24,7 +24,7 @@ static int pdiag_put_info(const struct packet_sock *po, struct sk_buff *nlskb)
 		pinfo.pdi_flags |= PDI_RUNNING;
 	if (po->auxdata)
 		pinfo.pdi_flags |= PDI_AUXDATA;
-	if (po->origdev)
+	if (packet_sock_flag(po, PACKET_SOCK_ORIGDEV))
 		pinfo.pdi_flags |= PDI_ORIGDEV;
 	if (po->has_vnet_hdr)
 		pinfo.pdi_flags |= PDI_VNETHDR;
diff --git a/net/packet/internal.h b/net/packet/internal.h
index f10294800aafb..f39dcc7608bc6 100644
--- a/net/packet/internal.h
+++ b/net/packet/internal.h
@@ -115,9 +115,9 @@ struct packet_sock {
 	int			copy_thresh;
 	spinlock_t		bind_lock;
 	struct mutex		pg_vec_lock;
+	unsigned long		flags;
 	unsigned int		running;	/* bind_lock must be held */
 	unsigned int		auxdata:1,	/* writer must hold sock lock */
-				origdev:1,
 				has_vnet_hdr:1,
 				tp_loss:1,
 				tp_tx_has_off:1;
@@ -142,4 +142,24 @@ static struct packet_sock *pkt_sk(struct sock *sk)
 	return (struct packet_sock *)sk;
 }
 
+enum packet_sock_flags {
+	PACKET_SOCK_ORIGDEV,
+};
+
+static inline void packet_sock_flag_set(struct packet_sock *po,
+					enum packet_sock_flags flag,
+					bool val)
+{
+	if (val)
+		set_bit(flag, &po->flags);
+	else
+		clear_bit(flag, &po->flags);
+}
+
+static inline bool packet_sock_flag(const struct packet_sock *po,
+				    enum packet_sock_flags flag)
+{
+	return test_bit(flag, &po->flags);
+}
+
 #endif
-- 
2.39.2

[PATCH 4.14 033/116] net/packet: convert po->auxdata to an atomic flag

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit fd53c297aa7b077ae98a3d3d2d3aa278a1686ba6 ]

po->auxdata can be read while another thread
is changing its value, potentially raising KCSAN splat.

Convert it to PACKET_SOCK_AUXDATA flag.

Fixes: 8dc419447415 ("[PACKET]: Add optional checksum computation for recvmsg")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/packet/af_packet.c | 8 +++-----
 net/packet/diag.c      | 2 +-
 net/packet/internal.h  | 4 ++--
 3 files changed, 6 insertions(+), 8 deletions(-)

diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index ce6afdb50933b..8b44ad304a656 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -3480,7 +3480,7 @@ static int packet_recvmsg(struct socket *sock, struct msghdr *msg, size_t len,
 		memcpy(msg->msg_name, &PACKET_SKB_CB(skb)->sa, copy_len);
 	}
 
-	if (pkt_sk(sk)->auxdata) {
+	if (packet_sock_flag(pkt_sk(sk), PACKET_SOCK_AUXDATA)) {
 		struct tpacket_auxdata aux;
 
 		aux.tp_status = TP_STATUS_USER;
@@ -3865,9 +3865,7 @@ packet_setsockopt(struct socket *sock, int level, int optname, char __user *optv
 		if (copy_from_user(&val, optval, sizeof(val)))
 			return -EFAULT;
 
-		lock_sock(sk);
-		po->auxdata = !!val;
-		release_sock(sk);
+		packet_sock_flag_set(po, PACKET_SOCK_AUXDATA, val);
 		return 0;
 	}
 	case PACKET_ORIGDEV:
@@ -4009,7 +4007,7 @@ static int packet_getsockopt(struct socket *sock, int level, int optname,
 
 		break;
 	case PACKET_AUXDATA:
-		val = po->auxdata;
+		val = packet_sock_flag(po, PACKET_SOCK_AUXDATA);
 		break;
 	case PACKET_ORIGDEV:
 		val = packet_sock_flag(po, PACKET_SOCK_ORIGDEV);
diff --git a/net/packet/diag.c b/net/packet/diag.c
index bf5928e5df035..d9f912ad23dfa 100644
--- a/net/packet/diag.c
+++ b/net/packet/diag.c
@@ -22,7 +22,7 @@ static int pdiag_put_info(const struct packet_sock *po, struct sk_buff *nlskb)
 	pinfo.pdi_flags = 0;
 	if (po->running)
 		pinfo.pdi_flags |= PDI_RUNNING;
-	if (po->auxdata)
+	if (packet_sock_flag(po, PACKET_SOCK_AUXDATA))
 		pinfo.pdi_flags |= PDI_AUXDATA;
 	if (packet_sock_flag(po, PACKET_SOCK_ORIGDEV))
 		pinfo.pdi_flags |= PDI_ORIGDEV;
diff --git a/net/packet/internal.h b/net/packet/internal.h
index f39dcc7608bc6..3d871cae85b8c 100644
--- a/net/packet/internal.h
+++ b/net/packet/internal.h
@@ -117,8 +117,7 @@ struct packet_sock {
 	struct mutex		pg_vec_lock;
 	unsigned long		flags;
 	unsigned int		running;	/* bind_lock must be held */
-	unsigned int		auxdata:1,	/* writer must hold sock lock */
-				has_vnet_hdr:1,
+	unsigned int		has_vnet_hdr:1, /* writer must hold sock lock */
 				tp_loss:1,
 				tp_tx_has_off:1;
 	int			pressure;
@@ -144,6 +143,7 @@ static struct packet_sock *pkt_sk(struct sock *sk)
 
 enum packet_sock_flags {
 	PACKET_SOCK_ORIGDEV,
+	PACKET_SOCK_AUXDATA,
 };
 
 static inline void packet_sock_flag_set(struct packet_sock *po,
-- 
2.39.2

[PATCH 4.14 034/116] scsi: target: iscsit: Fix TAS handling during conn cleanup

[Greg Kroah-Hartman]

From: Mike Christie <michael.christie@oracle.com>

[ Upstream commit cc79da306ebb2edb700c3816b90219223182ac3c ]

Fix a bug added in commit f36199355c64 ("scsi: target: iscsi: Fix cmd abort
fabric stop race").

If CMD_T_TAS is set on the se_cmd we must call iscsit_free_cmd() to do the
last put on the cmd and free it, because the connection is down and we will
not up sending the response and doing the put from the normal I/O
path.

Add a check for CMD_T_TAS in iscsit_release_commands_from_conn() so we now
detect this case and run iscsit_free_cmd().

Fixes: f36199355c64 ("scsi: target: iscsi: Fix cmd abort fabric stop race")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230319015620.96006-9-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/iscsi/iscsi_target.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c
index d9fcef82ddf59..d801f5b388b8a 100644
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -4088,9 +4088,12 @@ static void iscsit_release_commands_from_conn(struct iscsi_conn *conn)
 	list_for_each_entry_safe(cmd, cmd_tmp, &tmp_list, i_conn_node) {
 		struct se_cmd *se_cmd = &cmd->se_cmd;
 
-		if (se_cmd->se_tfo != NULL) {
-			spin_lock_irq(&se_cmd->t_state_lock);
-			if (se_cmd->transport_state & CMD_T_ABORTED) {
+		if (!se_cmd->se_tfo)
+			continue;
+
+		spin_lock_irq(&se_cmd->t_state_lock);
+		if (se_cmd->transport_state & CMD_T_ABORTED) {
+			if (!(se_cmd->transport_state & CMD_T_TAS))
 				/*
 				 * LIO's abort path owns the cleanup for this,
 				 * so put it back on the list and let
@@ -4098,11 +4101,10 @@ static void iscsit_release_commands_from_conn(struct iscsi_conn *conn)
 				 */
 				list_move_tail(&cmd->i_conn_node,
 					       &conn->conn_cmd_list);
-			} else {
-				se_cmd->transport_state |= CMD_T_FABRIC_STOP;
-			}
-			spin_unlock_irq(&se_cmd->t_state_lock);
+		} else {
+			se_cmd->transport_state |= CMD_T_FABRIC_STOP;
 		}
+		spin_unlock_irq(&se_cmd->t_state_lock);
 	}
 	spin_unlock_bh(&conn->cmd_lock);
 
-- 
2.39.2

[PATCH 4.14 035/116] scsi: megaraid: Fix mega_cmd_done() CMDID_INT_CMDS

[Greg Kroah-Hartman]

From: Danila Chernetsov <listdansp@mail.ru>

[ Upstream commit 75cb113cd43f06aaf4f1bda0069cfd5b98e909eb ]

When cmdid == CMDID_INT_CMDS, the 'cmds' pointer is NULL but is
dereferenced below.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 0f2bb84d2a68 ("[SCSI] megaraid: simplify internal command handling")
Signed-off-by: Danila Chernetsov <listdansp@mail.ru>
Link: https://lore.kernel.org/r/20230317175109.18585-1-listdansp@mail.ru
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/megaraid.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index eed6d45b80251..b6a62c8c26715 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -1443,6 +1443,7 @@ mega_cmd_done(adapter_t *adapter, u8 completed[], int nstatus, int status)
 		 */
 		if (cmdid == CMDID_INT_CMDS) {
 			scb = &adapter->int_scb;
+			cmd = scb->cmd;
 
 			list_del_init(&scb->list);
 			scb->state = SCB_FREE;
-- 
2.39.2

[PATCH 4.14 036/116] md/raid10: fix leak of r10bio->remaining for recovery

[Greg Kroah-Hartman]

From: Yu Kuai <yukuai3@huawei.com>

[ Upstream commit 26208a7cffd0c7cbf14237ccd20c7270b3ffeb7e ]

raid10_sync_request() will add 'r10bio->remaining' for both rdev and
replacement rdev. However, if the read io fails, recovery_request_write()
returns without issuing the write io, in this case, end_sync_request()
is only called once and 'remaining' is leaked, cause an io hang.

Fix the problem by decreasing 'remaining' according to if 'bio' and
'repl_bio' is valid.

Fixes: 24afd80d99f8 ("md/raid10: handle recovery of replacement devices.")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230310073855.1337560-5-yukuai1@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/raid10.c | 23 +++++++++++++----------
 1 file changed, 13 insertions(+), 10 deletions(-)

diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 3ad0a1460eb77..95c3a21cd7335 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -2234,11 +2234,22 @@ static void recovery_request_write(struct mddev *mddev, struct r10bio *r10_bio)
 {
 	struct r10conf *conf = mddev->private;
 	int d;
-	struct bio *wbio, *wbio2;
+	struct bio *wbio = r10_bio->devs[1].bio;
+	struct bio *wbio2 = r10_bio->devs[1].repl_bio;
+
+	/* Need to test wbio2->bi_end_io before we call
+	 * generic_make_request as if the former is NULL,
+	 * the latter is free to free wbio2.
+	 */
+	if (wbio2 && !wbio2->bi_end_io)
+		wbio2 = NULL;
 
 	if (!test_bit(R10BIO_Uptodate, &r10_bio->state)) {
 		fix_recovery_read_error(r10_bio);
-		end_sync_request(r10_bio);
+		if (wbio->bi_end_io)
+			end_sync_request(r10_bio);
+		if (wbio2)
+			end_sync_request(r10_bio);
 		return;
 	}
 
@@ -2247,14 +2258,6 @@ static void recovery_request_write(struct mddev *mddev, struct r10bio *r10_bio)
 	 * and submit the write request
 	 */
 	d = r10_bio->devs[1].devnum;
-	wbio = r10_bio->devs[1].bio;
-	wbio2 = r10_bio->devs[1].repl_bio;
-	/* Need to test wbio2->bi_end_io before we call
-	 * generic_make_request as if the former is NULL,
-	 * the latter is free to free wbio2.
-	 */
-	if (wbio2 && !wbio2->bi_end_io)
-		wbio2 = NULL;
 	if (wbio->bi_end_io) {
 		atomic_inc(&conf->mirrors[d].rdev->nr_pending);
 		md_sync_acct(conf->mirrors[d].rdev->bdev, bio_sectors(wbio));
-- 
2.39.2

[PATCH 4.14 037/116] wifi: iwlwifi: make the loop for card preparation effective

[Greg Kroah-Hartman]

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

[ Upstream commit 28965ec0b5d9112585f725660e2ff13218505ace ]

Since we didn't reset t to 0, only the first iteration of the loop
did checked the ready bit several times.
>From the second iteration and on, we just tested the bit once and
continued to the next iteration.

Reported-and-tested-by: Lorenzo Zolfanelli <lorenzo@zolfa.nl>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216452
Fixes: 289e5501c314 ("iwlwifi: fix the preparation of the card")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.615b683ab9c8.Ic52c3229d3345b0064fa34263293db095d88daf8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
index 4d3cbe554f5bf..647ca6479a1e7 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
@@ -562,7 +562,6 @@ static int iwl_pcie_set_hw_ready(struct iwl_trans *trans)
 int iwl_pcie_prepare_card_hw(struct iwl_trans *trans)
 {
 	int ret;
-	int t = 0;
 	int iter;
 
 	IWL_DEBUG_INFO(trans, "iwl_trans_prepare_card_hw enter\n");
@@ -577,6 +576,8 @@ int iwl_pcie_prepare_card_hw(struct iwl_trans *trans)
 	usleep_range(1000, 2000);
 
 	for (iter = 0; iter < 10; iter++) {
+		int t = 0;
+
 		/* If HW is not ready, prepare the conditions to check again */
 		iwl_set_bit(trans, CSR_HW_IF_CONFIG_REG,
 			    CSR_HW_IF_CONFIG_REG_PREPARE);
-- 
2.39.2

[PATCH 4.14 038/116] wifi: iwlwifi: mvm: check firmware response size

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 13513cec93ac9902d0b896976d8bab3758a9881c ]

Check the firmware response size for responses to the
memory read/write command in debugfs before using it.

Fixes: 2b55f43f8e47 ("iwlwifi: mvm: Add mem debugfs entry")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.0d56fcaf68ee.I70e9571f3ed7263929b04f8fabad23c9b999e4ea@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c
index 714996187236e..7a830a9f702f7 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c
@@ -1721,6 +1721,11 @@ static ssize_t iwl_dbgfs_mem_read(struct file *file, char __user *user_buf,
 	if (ret < 0)
 		return ret;
 
+	if (iwl_rx_packet_payload_len(hcmd.resp_pkt) < sizeof(*rsp)) {
+		ret = -EIO;
+		goto out;
+	}
+
 	rsp = (void *)hcmd.resp_pkt->data;
 	if (le32_to_cpu(rsp->status) != DEBUG_MEM_STATUS_SUCCESS) {
 		ret = -ENXIO;
@@ -1798,6 +1803,11 @@ static ssize_t iwl_dbgfs_mem_write(struct file *file,
 	if (ret < 0)
 		return ret;
 
+	if (iwl_rx_packet_payload_len(hcmd.resp_pkt) < sizeof(*rsp)) {
+		ret = -EIO;
+		goto out;
+	}
+
 	rsp = (void *)hcmd.resp_pkt->data;
 	if (rsp->status != DEBUG_MEM_STATUS_SUCCESS) {
 		ret = -ENXIO;
-- 
2.39.2

[PATCH 4.14 039/116] ixgbe: Allow flow hash to be set via ethtool

[Greg Kroah-Hartman]

From: Joe Damato <jdamato@fastly.com>

[ Upstream commit 4f3ed1293feb9502dc254b05802faf1ad3317ac6 ]

ixgbe currently returns `EINVAL` whenever the flowhash it set by ethtool
because the ethtool code in the kernel passes a non-zero value for hfunc
that ixgbe should allow.

When ethtool is called with `ETHTOOL_SRXFHINDIR`,
`ethtool_set_rxfh_indir` will call ixgbe's set_rxfh function
with `ETH_RSS_HASH_NO_CHANGE`. This value should be accepted.

When ethtool is called with `ETHTOOL_SRSSH`, `ethtool_set_rxfh` will
call ixgbe's set_rxfh function with `rxfh.hfunc`, which appears to be
hardcoded in ixgbe to always be `ETH_RSS_HASH_TOP`. This value should
also be accepted.

Before this patch:

$ sudo ethtool -L eth1 combined 10
$ sudo ethtool -X eth1 default
Cannot set RX flow hash configuration: Invalid argument

After this patch:

$ sudo ethtool -L eth1 combined 10
$ sudo ethtool -X eth1 default
$ sudo ethtool -x eth1
RX flow hash indirection table for eth1 with 10 RX ring(s):
    0:      0     1     2     3     4     5     6     7
    8:      8     9     0     1     2     3     4     5
   16:      6     7     8     9     0     1     2     3
   24:      4     5     6     7     8     9     0     1
   ...

Fixes: 1c7cf0784e4d ("ixgbe: support for ethtool set_rxfh")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index f7e68083200cf..4bfa9ba8201b1 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -3020,8 +3020,8 @@ static int ixgbe_set_rxfh(struct net_device *netdev, const u32 *indir,
 	int i;
 	u32 reta_entries = ixgbe_rss_indir_tbl_entries(adapter);
 
-	if (hfunc)
-		return -EINVAL;
+	if (hfunc != ETH_RSS_HASH_NO_CHANGE && hfunc != ETH_RSS_HASH_TOP)
+		return -EOPNOTSUPP;
 
 	/* Fill out the redirection table */
 	if (indir) {
-- 
2.39.2

[PATCH 4.14 040/116] ixgbe: Enable setting RSS table to default values

[Greg Kroah-Hartman]

From: Joe Damato <jdamato@fastly.com>

[ Upstream commit e85d3d55875f7a1079edfbc4e4e98d6f8aea9ac7 ]

ethtool uses `ETHTOOL_GRXRINGS` to compute how many queues are supported
by RSS. The driver should return the smaller of either:
  - The maximum number of RSS queues the device supports, OR
  - The number of RX queues configured

Prior to this change, running `ethtool -X $iface default` fails if the
number of queues configured is larger than the number supported by RSS,
even though changing the queue count correctly resets the flowhash to
use all supported queues.

Other drivers (for example, i40e) will succeed but the flow hash will
reset to support the maximum number of queues supported by RSS, even if
that amount is smaller than the configured amount.

Prior to this change:

$ sudo ethtool -L eth1 combined 20
$ sudo ethtool -x eth1
RX flow hash indirection table for eth1 with 20 RX ring(s):
    0:      0     1     2     3     4     5     6     7
    8:      8     9    10    11    12    13    14    15
   16:      0     1     2     3     4     5     6     7
   24:      8     9    10    11    12    13    14    15
   32:      0     1     2     3     4     5     6     7
...

You can see that the flowhash was correctly set to use the maximum
number of queues supported by the driver (16).

However, asking the NIC to reset to "default" fails:

$ sudo ethtool -X eth1 default
Cannot set RX flow hash configuration: Invalid argument

After this change, the flowhash can be reset to default which will use
all of the available RSS queues (16) or the configured queue count,
whichever is smaller.

Starting with eth1 which has 10 queues and a flowhash distributing to
all 10 queues:

$ sudo ethtool -x eth1
RX flow hash indirection table for eth1 with 10 RX ring(s):
    0:      0     1     2     3     4     5     6     7
    8:      8     9     0     1     2     3     4     5
   16:      6     7     8     9     0     1     2     3
...

Increasing the queue count to 48 resets the flowhash to distribute to 16
queues, as it did before this patch:

$ sudo ethtool -L eth1 combined 48
$ sudo ethtool -x eth1
RX flow hash indirection table for eth1 with 16 RX ring(s):
    0:      0     1     2     3     4     5     6     7
    8:      8     9    10    11    12    13    14    15
   16:      0     1     2     3     4     5     6     7
...

Due to the other bugfix in this series, the flowhash can be set to use
queues 0-5:

$ sudo ethtool -X eth1 equal 5
$ sudo ethtool -x eth1
RX flow hash indirection table for eth1 with 16 RX ring(s):
    0:      0     1     2     3     4     0     1     2
    8:      3     4     0     1     2     3     4     0
   16:      1     2     3     4     0     1     2     3
...

Due to this bugfix, the flowhash can be reset to default and use 16
queues:

$ sudo ethtool -X eth1 default
$ sudo ethtool -x eth1
RX flow hash indirection table for eth1 with 16 RX ring(s):
    0:      0     1     2     3     4     5     6     7
    8:      8     9    10    11    12    13    14    15
   16:      0     1     2     3     4     5     6     7
...

Fixes: 91cd94bfe4f0 ("ixgbe: add basic support for setting and getting nfc controls")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/intel/ixgbe/ixgbe_ethtool.c  | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index 4bfa9ba8201b1..55b2b6eaae2bf 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -2554,6 +2554,14 @@ static int ixgbe_get_rss_hash_opts(struct ixgbe_adapter *adapter,
 	return 0;
 }
 
+static int ixgbe_rss_indir_tbl_max(struct ixgbe_adapter *adapter)
+{
+	if (adapter->hw.mac.type < ixgbe_mac_X550)
+		return 16;
+	else
+		return 64;
+}
+
 static int ixgbe_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd,
 			   u32 *rule_locs)
 {
@@ -2562,7 +2570,8 @@ static int ixgbe_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd,
 
 	switch (cmd->cmd) {
 	case ETHTOOL_GRXRINGS:
-		cmd->data = adapter->num_rx_queues;
+		cmd->data = min_t(int, adapter->num_rx_queues,
+				  ixgbe_rss_indir_tbl_max(adapter));
 		ret = 0;
 		break;
 	case ETHTOOL_GRXCLSRLCNT:
@@ -2964,14 +2973,6 @@ static int ixgbe_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd)
 	return ret;
 }
 
-static int ixgbe_rss_indir_tbl_max(struct ixgbe_adapter *adapter)
-{
-	if (adapter->hw.mac.type < ixgbe_mac_X550)
-		return 16;
-	else
-		return 64;
-}
-
 static u32 ixgbe_get_rxfh_key_size(struct net_device *netdev)
 {
 	return IXGBE_RSS_KEY_SIZE;
-- 
2.39.2

[PATCH 4.14 041/116] ipv4: Fix potential uninit variable access bug in __ip_make_skb()

[Greg Kroah-Hartman]

From: Ziyang Xuan <william.xuanziyang@huawei.com>

[ Upstream commit 99e5acae193e369b71217efe6f1dad42f3f18815 ]

Like commit ea30388baebc ("ipv6: Fix an uninit variable access bug in
__ip6_make_skb()"). icmphdr does not in skb linear region under the
scenario of SOCK_RAW socket. Access icmp_hdr(skb)->type directly will
trigger the uninit variable access bug.

Use a local variable icmp_type to carry the correct value in different
scenarios.

Fixes: 96793b482540 ("[IPV4]: Add ICMPMsgStats MIB (RFC 4293)")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/ip_output.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index aab18ab49e3b9..c5c9dc0f41cbc 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -1415,9 +1415,19 @@ struct sk_buff *__ip_make_skb(struct sock *sk,
 	cork->dst = NULL;
 	skb_dst_set(skb, &rt->dst);
 
-	if (iph->protocol == IPPROTO_ICMP)
-		icmp_out_count(net, ((struct icmphdr *)
-			skb_transport_header(skb))->type);
+	if (iph->protocol == IPPROTO_ICMP) {
+		u8 icmp_type;
+
+		/* For such sockets, transhdrlen is zero when do ip_append_data(),
+		 * so icmphdr does not in skb linear region and can not get icmp_type
+		 * by icmp_hdr(skb)->type.
+		 */
+		if (sk->sk_type == SOCK_RAW && !inet_sk(sk)->hdrincl)
+			icmp_type = fl4->fl4_icmp_type;
+		else
+			icmp_type = icmp_hdr(skb)->type;
+		icmp_out_count(net, icmp_type);
+	}
 
 	ip_cork_release(cork);
 out:
-- 
2.39.2

[PATCH 4.14 042/116] Revert "Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work"

[Greg Kroah-Hartman]

From: Liu Jian <liujian56@huawei.com>

[ Upstream commit db2bf510bd5d57f064d9e1db395ed86a08320c54 ]

This reverts commit 1e9ac114c4428fdb7ff4635b45d4f46017e8916f.

This patch introduces a possible null-ptr-def problem. Revert it. And the
fixed bug by this patch have resolved by commit 73f7b171b7c0 ("Bluetooth:
btsdio: fix use after free bug in btsdio_remove due to race condition").

Fixes: 1e9ac114c442 ("Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btsdio.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/bluetooth/btsdio.c b/drivers/bluetooth/btsdio.c
index bd55bf7a9914c..20142bc77554c 100644
--- a/drivers/bluetooth/btsdio.c
+++ b/drivers/bluetooth/btsdio.c
@@ -353,7 +353,6 @@ static void btsdio_remove(struct sdio_func *func)
 
 	BT_DBG("func %p", func);
 
-	cancel_work_sync(&data->work);
 	if (!data)
 		return;
 
-- 
2.39.2

[PATCH 4.14 043/116] net: amd: Fix link leak when verifying config failed

[Greg Kroah-Hartman]

From: Gencen Gan <gangecen@hust.edu.cn>

[ Upstream commit d325c34d9e7e38d371c0a299d415e9b07f66a1fb ]

After failing to verify configuration, it returns directly without
releasing link, which may cause memory leak.

Paolo Abeni thinks that the whole code of this driver is quite
"suboptimal" and looks unmainatained since at least ~15y, so he
suggests that we could simply remove the whole driver, please
take it into consideration.

Simon Horman suggests that the fix label should be set to
"Linux-2.6.12-rc2" considering that the problem has existed
since the driver was introduced and the commit above doesn't
seem to exist in net/net-next.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Gan Gecen <gangecen@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amd/nmclan_cs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/amd/nmclan_cs.c b/drivers/net/ethernet/amd/nmclan_cs.c
index 9c152d85840d7..c9d2a6f150624 100644
--- a/drivers/net/ethernet/amd/nmclan_cs.c
+++ b/drivers/net/ethernet/amd/nmclan_cs.c
@@ -652,7 +652,7 @@ static int nmclan_config(struct pcmcia_device *link)
     } else {
       pr_notice("mace id not found: %x %x should be 0x40 0x?9\n",
 		sig[0], sig[1]);
-      return -ENODEV;
+      goto failed;
     }
   }
 
-- 
2.39.2

[PATCH 4.14 044/116] tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 50749f2dd6854a41830996ad302aef2ffaf011d8 ]

syzkaller reported [0] memory leaks of an UDP socket and ZEROCOPY
skbs.  We can reproduce the problem with these sequences:

  sk = socket(AF_INET, SOCK_DGRAM, 0)
  sk.setsockopt(SOL_SOCKET, SO_TIMESTAMPING, SOF_TIMESTAMPING_TX_SOFTWARE)
  sk.setsockopt(SOL_SOCKET, SO_ZEROCOPY, 1)
  sk.sendto(b'', MSG_ZEROCOPY, ('127.0.0.1', 53))
  sk.close()

sendmsg() calls msg_zerocopy_alloc(), which allocates a skb, sets
skb->cb->ubuf.refcnt to 1, and calls sock_hold().  Here, struct
ubuf_info_msgzc indirectly holds a refcnt of the socket.  When the
skb is sent, __skb_tstamp_tx() clones it and puts the clone into
the socket's error queue with the TX timestamp.

When the original skb is received locally, skb_copy_ubufs() calls
skb_unclone(), and pskb_expand_head() increments skb->cb->ubuf.refcnt.
This additional count is decremented while freeing the skb, but struct
ubuf_info_msgzc still has a refcnt, so __msg_zerocopy_callback() is
not called.

The last refcnt is not released unless we retrieve the TX timestamped
skb by recvmsg().  Since we clear the error queue in inet_sock_destruct()
after the socket's refcnt reaches 0, there is a circular dependency.
If we close() the socket holding such skbs, we never call sock_put()
and leak the count, sk, and skb.

TCP has the same problem, and commit e0c8bccd40fc ("net: stream:
purge sk_error_queue in sk_stream_kill_queues()") tried to fix it
by calling skb_queue_purge() during close().  However, there is a
small chance that skb queued in a qdisc or device could be put
into the error queue after the skb_queue_purge() call.

In __skb_tstamp_tx(), the cloned skb should not have a reference
to the ubuf to remove the circular dependency, but skb_clone() does
not call skb_copy_ubufs() for zerocopy skb.  So, we need to call
skb_orphan_frags_rx() for the cloned skb to call skb_copy_ubufs().

[0]:
BUG: memory leak
unreferenced object 0xffff88800c6d2d00 (size 1152):
  comm "syz-executor392", pid 264, jiffies 4294785440 (age 13.044s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 cd af e8 81 00 00 00 00  ................
    02 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00  ...@............
  backtrace:
    [<0000000055636812>] sk_prot_alloc+0x64/0x2a0 net/core/sock.c:2024
    [<0000000054d77b7a>] sk_alloc+0x3b/0x800 net/core/sock.c:2083
    [<0000000066f3c7e0>] inet_create net/ipv4/af_inet.c:319 [inline]
    [<0000000066f3c7e0>] inet_create+0x31e/0xe40 net/ipv4/af_inet.c:245
    [<000000009b83af97>] __sock_create+0x2ab/0x550 net/socket.c:1515
    [<00000000b9b11231>] sock_create net/socket.c:1566 [inline]
    [<00000000b9b11231>] __sys_socket_create net/socket.c:1603 [inline]
    [<00000000b9b11231>] __sys_socket_create net/socket.c:1588 [inline]
    [<00000000b9b11231>] __sys_socket+0x138/0x250 net/socket.c:1636
    [<000000004fb45142>] __do_sys_socket net/socket.c:1649 [inline]
    [<000000004fb45142>] __se_sys_socket net/socket.c:1647 [inline]
    [<000000004fb45142>] __x64_sys_socket+0x73/0xb0 net/socket.c:1647
    [<0000000066999e0e>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    [<0000000066999e0e>] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
    [<0000000017f238c1>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

BUG: memory leak
unreferenced object 0xffff888017633a00 (size 240):
  comm "syz-executor392", pid 264, jiffies 4294785440 (age 13.044s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 2d 6d 0c 80 88 ff ff  .........-m.....
  backtrace:
    [<000000002b1c4368>] __alloc_skb+0x229/0x320 net/core/skbuff.c:497
    [<00000000143579a6>] alloc_skb include/linux/skbuff.h:1265 [inline]
    [<00000000143579a6>] sock_omalloc+0xaa/0x190 net/core/sock.c:2596
    [<00000000be626478>] msg_zerocopy_alloc net/core/skbuff.c:1294 [inline]
    [<00000000be626478>] msg_zerocopy_realloc+0x1ce/0x7f0 net/core/skbuff.c:1370
    [<00000000cbfc9870>] __ip_append_data+0x2adf/0x3b30 net/ipv4/ip_output.c:1037
    [<0000000089869146>] ip_make_skb+0x26c/0x2e0 net/ipv4/ip_output.c:1652
    [<00000000098015c2>] udp_sendmsg+0x1bac/0x2390 net/ipv4/udp.c:1253
    [<0000000045e0e95e>] inet_sendmsg+0x10a/0x150 net/ipv4/af_inet.c:819
    [<000000008d31bfde>] sock_sendmsg_nosec net/socket.c:714 [inline]
    [<000000008d31bfde>] sock_sendmsg+0x141/0x190 net/socket.c:734
    [<0000000021e21aa4>] __sys_sendto+0x243/0x360 net/socket.c:2117
    [<00000000ac0af00c>] __do_sys_sendto net/socket.c:2129 [inline]
    [<00000000ac0af00c>] __se_sys_sendto net/socket.c:2125 [inline]
    [<00000000ac0af00c>] __x64_sys_sendto+0xe1/0x1c0 net/socket.c:2125
    [<0000000066999e0e>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    [<0000000066999e0e>] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
    [<0000000017f238c1>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: f214f915e7db ("tcp: enable MSG_ZEROCOPY")
Fixes: b5947e5d1e71 ("udp: msg_zerocopy")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/skbuff.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 9dae8009b407d..71827da47274c 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -4420,6 +4420,9 @@ void __skb_tstamp_tx(struct sk_buff *orig_skb,
 			skb = alloc_skb(0, GFP_ATOMIC);
 	} else {
 		skb = skb_clone(orig_skb, GFP_ATOMIC);
+
+		if (skb_orphan_frags_rx(skb, GFP_ATOMIC))
+			return;
 	}
 	if (!skb)
 		return;
-- 
2.39.2

[PATCH 4.14 045/116] pstore: Revert pmsg_lock back to a normal mutex

[Greg Kroah-Hartman]

From: John Stultz <jstultz@google.com>

[ Upstream commit 5239a89b06d6b199f133bf0ffea421683187f257 ]

This reverts commit 76d62f24db07f22ccf9bc18ca793c27d4ebef721.

So while priority inversion on the pmsg_lock is an occasional
problem that an rt_mutex would help with, in uses where logging
is writing to pmsg heavily from multiple threads, the pmsg_lock
can be heavily contended.

After this change landed, it was reported that cases where the
mutex locking overhead was commonly adding on the order of 10s
of usecs delay had suddenly jumped to ~msec delay with rtmutex.

It seems the slight differences in the locks under this level
of contention causes the normal mutexes to utilize the spinning
optimizations, while the rtmutexes end up in the sleeping
slowpath (which allows additional threads to pile on trying
to take the lock).

In this case, it devolves to a worse case senerio where the lock
acquisition and scheduling overhead dominates, and each thread
is waiting on the order of ~ms to do ~us of work.

Obviously, having tons of threads all contending on a single
lock for logging is non-optimal, so the proper fix is probably
reworking pstore pmsg to have per-cpu buffers so we don't have
contention.

Additionally, Steven Rostedt has provided some furhter
optimizations for rtmutexes that improves the rtmutex spinning
path, but at least in my testing, I still see the test tripping
into the sleeping path on rtmutexes while utilizing the spinning
path with mutexes.

But in the short term, lets revert the change to the rt_mutex
and go back to normal mutexes to avoid a potentially major
performance regression. And we can work on optimizations to both
rtmutexes and finer-grained locking for pstore pmsg in the
future.

Cc: Wei Wang <wvw@google.com>
Cc: Midas Chien<midaschieh@google.com>
Cc: "Chunhui Li (李春辉)" <chunhui.li@mediatek.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: "Guilherme G. Piccoli" <gpiccoli@igalia.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: kernel-team@android.com
Fixes: 76d62f24db07 ("pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion")
Reported-by: "Chunhui Li (李春辉)" <chunhui.li@mediatek.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230308204043.2061631-1-jstultz@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/pstore/pmsg.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/fs/pstore/pmsg.c b/fs/pstore/pmsg.c
index ffc13ea196d2a..24db02de17874 100644
--- a/fs/pstore/pmsg.c
+++ b/fs/pstore/pmsg.c
@@ -15,10 +15,9 @@
 #include <linux/device.h>
 #include <linux/fs.h>
 #include <linux/uaccess.h>
-#include <linux/rtmutex.h>
 #include "internal.h"
 
-static DEFINE_RT_MUTEX(pmsg_lock);
+static DEFINE_MUTEX(pmsg_lock);
 
 static ssize_t write_pmsg(struct file *file, const char __user *buf,
 			  size_t count, loff_t *ppos)
@@ -37,9 +36,9 @@ static ssize_t write_pmsg(struct file *file, const char __user *buf,
 	if (!access_ok(VERIFY_READ, buf, count))
 		return -EFAULT;
 
-	rt_mutex_lock(&pmsg_lock);
+	mutex_lock(&pmsg_lock);
 	ret = psinfo->write_user(&record, buf);
-	rt_mutex_unlock(&pmsg_lock);
+	mutex_unlock(&pmsg_lock);
 	return ret ? ret : count;
 }
 
-- 
2.39.2

[PATCH 4.14 046/116] linux/vt_buffer.h: allow either builtin or modular for macros

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 2b76ffe81e32afd6d318dc4547e2ba8c46207b77 ]

Fix build errors on ARCH=alpha when CONFIG_MDA_CONSOLE=m.
This allows the ARCH macros to be the only ones defined.

In file included from ../drivers/video/console/mdacon.c:37:
../arch/alpha/include/asm/vga.h:17:40: error: expected identifier or '(' before 'volatile'
   17 | static inline void scr_writew(u16 val, volatile u16 *addr)
      |                                        ^~~~~~~~
../include/linux/vt_buffer.h:24:34: note: in definition of macro 'scr_writew'
   24 | #define scr_writew(val, addr) (*(addr) = (val))
      |                                  ^~~~
../include/linux/vt_buffer.h:24:40: error: expected ')' before '=' token
   24 | #define scr_writew(val, addr) (*(addr) = (val))
      |                                        ^
../arch/alpha/include/asm/vga.h:17:20: note: in expansion of macro 'scr_writew'
   17 | static inline void scr_writew(u16 val, volatile u16 *addr)
      |                    ^~~~~~~~~~
../arch/alpha/include/asm/vga.h:25:29: error: expected identifier or '(' before 'volatile'
   25 | static inline u16 scr_readw(volatile const u16 *addr)
      |                             ^~~~~~~~

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Link: https://lore.kernel.org/r/20230329021529.16188-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/vt_buffer.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/vt_buffer.h b/include/linux/vt_buffer.h
index 848db1b1569ff..919d999a8c1db 100644
--- a/include/linux/vt_buffer.h
+++ b/include/linux/vt_buffer.h
@@ -16,7 +16,7 @@
 
 #include <linux/string.h>
 
-#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_MDA_CONSOLE)
+#if IS_ENABLED(CONFIG_VGA_CONSOLE) || IS_ENABLED(CONFIG_MDA_CONSOLE)
 #include <asm/vga.h>
 #endif
 
-- 
2.39.2

[PATCH 4.14 047/116] spi: fsl-spi: Fix CPM/QE mode Litte Endian

[Greg Kroah-Hartman]

From: Christophe Leroy <christophe.leroy@csgroup.eu>

[ Upstream commit c20c57d9868d7f9fd1b2904c7801b07e128f6322 ]

CPM has the same problem as QE so for CPM also use the fix added
by commit 0398fb70940e ("spi/spi_mpc8xxx: Fix QE mode Litte Endian"):

  CPM mode uses Little Endian so words > 8 bits are byte swapped.
  Workaround this by always enforcing wordsize 8 for 16 and 32 bits
  words. Unfortunately this will not work for LSB transfers
  where wordsize is > 8 bits so disable these for now.

Also limit the workaround to 16 and 32 bits words because it can
only work for multiples of 8-bits.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
Fixes: 0398fb70940e ("spi/spi_mpc8xxx: Fix QE mode Litte Endian")
Link: https://lore.kernel.org/r/1b7d3e84b1128f42c1887dd2fb9cdf390f541bc1.1680371809.git.christophe.leroy@csgroup.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-fsl-spi.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c
index cd784552de7f1..479d10dc6cb84 100644
--- a/drivers/spi/spi-fsl-spi.c
+++ b/drivers/spi/spi-fsl-spi.c
@@ -205,8 +205,8 @@ static int mspi_apply_qe_mode_quirks(struct spi_mpc8xxx_cs *cs,
 				struct spi_device *spi,
 				int bits_per_word)
 {
-	/* QE uses Little Endian for words > 8
-	 * so transform all words > 8 into 8 bits
+	/* CPM/QE uses Little Endian for words > 8
+	 * so transform 16 and 32 bits words into 8 bits
 	 * Unfortnatly that doesn't work for LSB so
 	 * reject these for now */
 	/* Note: 32 bits word, LSB works iff
@@ -214,9 +214,11 @@ static int mspi_apply_qe_mode_quirks(struct spi_mpc8xxx_cs *cs,
 	if (spi->mode & SPI_LSB_FIRST &&
 	    bits_per_word > 8)
 		return -EINVAL;
-	if (bits_per_word > 8)
+	if (bits_per_word <= 8)
+		return bits_per_word;
+	if (bits_per_word == 16 || bits_per_word == 32)
 		return 8; /* pretend its 8 bits */
-	return bits_per_word;
+	return -EINVAL;
 }
 
 static int fsl_spi_setup_transfer(struct spi_device *spi,
@@ -246,7 +248,7 @@ static int fsl_spi_setup_transfer(struct spi_device *spi,
 		bits_per_word = mspi_apply_cpu_mode_quirks(cs, spi,
 							   mpc8xxx_spi,
 							   bits_per_word);
-	else if (mpc8xxx_spi->flags & SPI_QE)
+	else
 		bits_per_word = mspi_apply_qe_mode_quirks(cs, spi,
 							  bits_per_word);
 
-- 
2.39.2

[PATCH 4.14 048/116] of: Fix modalias string generation

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@bootlin.com>

[ Upstream commit b19a4266c52de78496fe40f0b37580a3b762e67d ]

The helper generating an OF based modalias (of_device_get_modalias())
works fine, but due to the use of snprintf() internally it needs a
buffer one byte longer than what should be needed just for the entire
string (excluding the '\0'). Most users of this helper are sysfs hooks
providing the modalias string to users. They all provide a PAGE_SIZE
buffer which is way above the number of bytes required to fit the
modalias string and hence do not suffer from this issue.

There is another user though, of_device_request_module(), which is only
called by drivers/usb/common/ulpi.c. This request module function is
faulty, but maybe because in most cases there is an alternative, ULPI
driver users have not noticed it.

In this function, of_device_get_modalias() is called twice. The first
time without buffer just to get the number of bytes required by the
modalias string (excluding the null byte), and a second time, after
buffer allocation, to fill the buffer. The allocation asks for an
additional byte, in order to store the trailing '\0'. However, the
buffer *length* provided to of_device_get_modalias() excludes this extra
byte. The internal use of snprintf() with a length that is exactly the
number of bytes to be written has the effect of using the last available
byte to store a '\0', which then smashes the last character of the
modalias string.

Provide the actual size of the buffer to of_device_get_modalias() to fix
this issue.

Note: the "str[size - 1] = '\0';" line is not really needed as snprintf
will anyway end the string with a null byte, but there is a possibility
that this function might be called on a struct device_node without
compatible, in this case snprintf() would not be executed. So we keep it
just to avoid possible unbounded strings.

Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Peter Chen <peter.chen@kernel.org>
Fixes: 9c829c097f2f ("of: device: Support loading a module with OF based modalias")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230404172148.82422-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/of/device.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/of/device.c b/drivers/of/device.c
index 64b710265d390..3255c97b14f64 100644
--- a/drivers/of/device.c
+++ b/drivers/of/device.c
@@ -257,12 +257,15 @@ int of_device_request_module(struct device *dev)
 	if (size < 0)
 		return size;
 
-	str = kmalloc(size + 1, GFP_KERNEL);
+	/* Reserve an additional byte for the trailing '\0' */
+	size++;
+
+	str = kmalloc(size, GFP_KERNEL);
 	if (!str)
 		return -ENOMEM;
 
 	of_device_get_modalias(dev, str, size);
-	str[size] = '\0';
+	str[size - 1] = '\0';
 	ret = request_module(str);
 	kfree(str);
 
-- 
2.39.2

[PATCH 4.14 049/116] ia64: mm/contig: fix section mismatch warning/error

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 58deeb4ef3b054498747d0929d94ac53ab90981f ]

alloc_per_cpu_data() is called by find_memory(), which is marked as
__init.  Therefore alloc_per_cpu_data() can also be marked as __init to
remedy this modpost problem.

WARNING: modpost: vmlinux.o: section mismatch in reference: alloc_per_cpu_data (section: .text) -> memblock_alloc_try_nid (section: .init.text)

Link: https://lkml.kernel.org/r/20230223034258.12917-1-rdunlap@infradead.org
Fixes: 4b9ddc7cf272 ("[IA64] Fix section mismatch in contig.c version of per_cpu_init()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/ia64/mm/contig.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c
index 52715a71aede0..179d354e02321 100644
--- a/arch/ia64/mm/contig.c
+++ b/arch/ia64/mm/contig.c
@@ -129,7 +129,7 @@ void *per_cpu_init(void)
 	return __per_cpu_start + __per_cpu_offset[smp_processor_id()];
 }
 
-static inline void
+static inline __init void
 alloc_per_cpu_data(void)
 {
 	cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * num_possible_cpus(),
-- 
2.39.2

[PATCH 4.14 050/116] uapi/linux/const.h: prefer ISO-friendly __typeof__

[Greg Kroah-Hartman]

From: Kevin Brodsky <kevin.brodsky@arm.com>

[ Upstream commit 31088f6f7906253ef4577f6a9b84e2d42447dba0 ]

typeof is (still) a GNU extension, which means that it cannot be used when
building ISO C (e.g.  -std=c99).  It should therefore be avoided in uapi
headers in favour of the ISO-friendly __typeof__.

Unfortunately this issue could not be detected by
CONFIG_UAPI_HEADER_TEST=y as the __ALIGN_KERNEL() macro is not expanded in
any uapi header.

This matters from a userspace perspective, not a kernel one. uapi
headers and their contents are expected to be usable in a variety of
situations, and in particular when building ISO C applications (with
-std=c99 or similar).

This particular problem can be reproduced by trying to use the
__ALIGN_KERNEL macro directly in application code, say:

#include <linux/const.h>

int align(int x, int a)
{
	return __KERNEL_ALIGN(x, a);
}

and trying to build that with -std=c99.

Link: https://lkml.kernel.org/r/20230411092747.3759032-1-kevin.brodsky@arm.com
Fixes: a79ff731a1b2 ("netfilter: xtables: make XT_ALIGN() usable in exported headers by exporting __ALIGN_KERNEL()")
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reported-by: Ruben Ayrapetyan <ruben.ayrapetyan@arm.com>
Tested-by: Ruben Ayrapetyan <ruben.ayrapetyan@arm.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Tested-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/uapi/linux/const.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/uapi/linux/const.h b/include/uapi/linux/const.h
index 0bd39530b2e38..4ef7c87d12492 100644
--- a/include/uapi/linux/const.h
+++ b/include/uapi/linux/const.h
@@ -28,7 +28,7 @@
 #define _BITUL(x)	(_AC(1,UL) << (x))
 #define _BITULL(x)	(_AC(1,ULL) << (x))
 
-#define __ALIGN_KERNEL(x, a)		__ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1)
+#define __ALIGN_KERNEL(x, a)		__ALIGN_KERNEL_MASK(x, (__typeof__(x))(a) - 1)
 #define __ALIGN_KERNEL_MASK(x, mask)	(((x) + (mask)) & ~(mask))
 
 #define __KERNEL_DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d))
-- 
2.39.2

[PATCH 4.14 051/116] sh: sq: Fix incorrect element size for allocating bitmap buffer

[Greg Kroah-Hartman]

From: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

[ Upstream commit 80f746e2bd0e1da3fdb49a53570e54a1a225faac ]

The Store Queue code allocates a bitmap buffer with the size of
multiple of sizeof(long) in sq_api_init(). While the buffer size
is calculated correctly, the code uses the wrong element size to
allocate the buffer which results in the allocated bitmap buffer
being too small.

Fix this by allocating the buffer with kcalloc() with element size
sizeof(long) instead of kzalloc() whose elements size defaults to
sizeof(char).

Fixes: d7c30c682a27 ("sh: Store Queue API rework.")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230419114854.528677-1-glaubitz@physik.fu-berlin.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sh/kernel/cpu/sh4/sq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c
index 4ca78ed71ad2c..c218bae8fe208 100644
--- a/arch/sh/kernel/cpu/sh4/sq.c
+++ b/arch/sh/kernel/cpu/sh4/sq.c
@@ -383,7 +383,7 @@ static int __init sq_api_init(void)
 	if (unlikely(!sq_cache))
 		return ret;
 
-	sq_bitmap = kzalloc(size, GFP_KERNEL);
+	sq_bitmap = kcalloc(size, sizeof(long), GFP_KERNEL);
 	if (unlikely(!sq_bitmap))
 		goto out;
 
-- 
2.39.2

[PATCH 4.14 052/116] usb: chipidea: fix missing goto in `ci_hdrc_probe`

[Greg Kroah-Hartman]

From: Yinhao Hu <dddddd@hust.edu.cn>

[ Upstream commit d6f712f53b79f5017cdcefafb7a5aea9ec52da5d ]

>From the comment of ci_usb_phy_init, it returns an error code if
usb_phy_init has failed, and it should do some clean up, not just
return directly.

Fix this by goto the error handling.

Fixes: 74475ede784d ("usb: chipidea: move PHY operation to core")
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Yinhao Hu <dddddd@hust.edu.cn>
Link: https://lore.kernel.org/r/20230412055852.971991-1-dddddd@hust.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/chipidea/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 48fbb6302e60e..4cacb91c47291 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -987,7 +987,7 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 	ret = ci_usb_phy_init(ci);
 	if (ret) {
 		dev_err(dev, "unable to init phy: %d\n", ret);
-		return ret;
+		goto ulpi_exit;
 	}
 
 	ci->hw_bank.phys = res->start;
-- 
2.39.2

[PATCH 4.14 053/116] tty: serial: fsl_lpuart: adjust buffer length to the intended size

[Greg Kroah-Hartman]

From: Shenwei Wang <shenwei.wang@nxp.com>

[ Upstream commit f73fd750552524b06b5d77ebfdd106ccc8fcac61 ]

Based on the fls function definition provided below, we should not
subtract 1 to obtain the correct buffer length:

fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.

Fixes: 5887ad43ee02 ("tty: serial: fsl_lpuart: Use cyclic DMA for Rx")
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://lore.kernel.org/r/20230410195555.1003900-1-shenwei.wang@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/fsl_lpuart.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 20dd476e4d1a1..e7ab8ec032cfe 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -998,7 +998,7 @@ static inline int lpuart_start_rx_dma(struct lpuart_port *sport)
 	 * 10ms at any baud rate.
 	 */
 	sport->rx_dma_rng_buf_len = (DMA_RX_TIMEOUT * baud /  bits / 1000) * 2;
-	sport->rx_dma_rng_buf_len = (1 << (fls(sport->rx_dma_rng_buf_len) - 1));
+	sport->rx_dma_rng_buf_len = (1 << fls(sport->rx_dma_rng_buf_len));
 	if (sport->rx_dma_rng_buf_len < 16)
 		sport->rx_dma_rng_buf_len = 16;
 
-- 
2.39.2

[PATCH 4.14 054/116] serial: 8250: Add missing wakeup event reporting

[Greg Kroah-Hartman]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 0ba9e3a13c6adfa99e32b2576d20820ab10ad48a ]

An 8250 UART configured as a wake-up source would not have reported
itself through sysfs as being the source of wake-up, correct that.

Fixes: b3b708fa2780 ("wake up from a serial port")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230414170241.2016255-1-f.fainelli@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/8250/8250_port.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index fe1de63269d1a..cdc1b2b0f4bc6 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -23,6 +23,7 @@
 #include <linux/moduleparam.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
+#include <linux/irq.h>
 #include <linux/console.h>
 #include <linux/sysrq.h>
 #include <linux/delay.h>
@@ -1886,6 +1887,7 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
 	unsigned char status;
 	unsigned long flags;
 	struct uart_8250_port *up = up_to_u8250p(port);
+	struct tty_port *tport = &port->state->port;
 	bool skip_rx = false;
 
 	if (iir & UART_IIR_NO_INT)
@@ -1909,6 +1911,8 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
 		skip_rx = true;
 
 	if (status & (UART_LSR_DR | UART_LSR_BI) && !skip_rx) {
+		if (irqd_is_wakeup_set(irq_get_irq_data(port->irq)))
+			pm_wakeup_event(tport->tty->dev, 0);
 		if (!up->dma || handle_rx_dma(up, iir))
 			status = serial8250_rx_chars(up, status);
 	}
-- 
2.39.2

[PATCH 4.14 055/116] staging: rtl8192e: Fix W_DISABLE# does not work after stop/start

[Greg Kroah-Hartman]

From: Philipp Hortmann <philipp.g.hortmann@gmail.com>

[ Upstream commit 3fac2397f562eb669ddc2f45867a253f3fc26184 ]

When loading the driver for rtl8192e, the W_DISABLE# switch is working as
intended. But when the WLAN is turned off in software and then turned on
again the W_DISABLE# does not work anymore. Reason for this is that in
the function _rtl92e_dm_check_rf_ctrl_gpio() the bfirst_after_down is
checked and returned when true. bfirst_after_down is set true when
switching the WLAN off in software. But it is not set to false again
when WLAN is turned on again.

Add bfirst_after_down = false in _rtl92e_sta_up to reset bit and fix
above described bug.

Fixes: 94a799425eee ("From: wlanfae <wlanfae@realtek.com> [PATCH 1/8] rtl8192e: Import new version of driver from realtek")
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20230418200201.GA17398@matrix-ESPRIMO-P710
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
index e1ede9fd4920b..8420bdae1a5cc 100644
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
@@ -778,6 +778,7 @@ static int _rtl92e_sta_up(struct net_device *dev, bool is_silent_reset)
 	else
 		netif_wake_queue(dev);
 
+	priv->bfirst_after_down = false;
 	return 0;
 }
 
-- 
2.39.2

[PATCH 4.14 056/116] spmi: Add a check for remove callback when removing a SPMI driver

[Greg Kroah-Hartman]

From: Jishnu Prakash <quic_jprakash@quicinc.com>

[ Upstream commit b56eef3e16d888883fefab47425036de80dd38fc ]

When removing a SPMI driver, there can be a crash due to NULL pointer
dereference if it does not have a remove callback defined. This is
one such call trace observed when removing the QCOM SPMI PMIC driver:

 dump_backtrace.cfi_jt+0x0/0x8
 dump_stack_lvl+0xd8/0x16c
 panic+0x188/0x498
 __cfi_slowpath+0x0/0x214
 __cfi_slowpath+0x1dc/0x214
 spmi_drv_remove+0x16c/0x1e0
 device_release_driver_internal+0x468/0x79c
 driver_detach+0x11c/0x1a0
 bus_remove_driver+0xc4/0x124
 driver_unregister+0x58/0x84
 cleanup_module+0x1c/0xc24 [qcom_spmi_pmic]
 __do_sys_delete_module+0x3ec/0x53c
 __arm64_sys_delete_module+0x18/0x28
 el0_svc_common+0xdc/0x294
 el0_svc+0x38/0x9c
 el0_sync_handler+0x8c/0xf0
 el0_sync+0x1b4/0x1c0

If a driver has all its resources allocated through devm_() APIs and
does not need any other explicit cleanup, it would not require a
remove callback to be defined. Hence, add a check for remove callback
presence before calling it when removing a SPMI driver.

Link: https://lore.kernel.org/r/1671601032-18397-2-git-send-email-quic_jprakash@quicinc.com
Fixes: 6f00f8c8635f ("mfd: qcom-spmi-pmic: Use devm_of_platform_populate()")
Fixes: 5a86bf343976 ("spmi: Linux driver framework for SPMI")
Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20230413223834.4084793-7-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spmi/spmi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/spmi/spmi.c b/drivers/spmi/spmi.c
index aa3edabc2b0fe..55f1cad836ba2 100644
--- a/drivers/spmi/spmi.c
+++ b/drivers/spmi/spmi.c
@@ -356,7 +356,8 @@ static int spmi_drv_remove(struct device *dev)
 	const struct spmi_driver *sdrv = to_spmi_driver(dev->driver);
 
 	pm_runtime_get_sync(dev);
-	sdrv->remove(to_spmi_device(dev));
+	if (sdrv->remove)
+		sdrv->remove(to_spmi_device(dev));
 	pm_runtime_put_noidle(dev);
 
 	pm_runtime_disable(dev);
-- 
2.39.2

[PATCH 4.14 057/116] macintosh/windfarm_smu_sat: Add missing of_node_put()

[Greg Kroah-Hartman]

From: Liang He <windhl@126.com>

[ Upstream commit 631cf002826007ab7415258ee647dcaf8845ad5a ]

We call of_node_get() in wf_sat_probe() after sat is created,
so we need the of_node_put() before *kfree(sat)*.

Fixes: ac171c46667c ("[PATCH] powerpc: Thermal control for dual core G5s")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230330033558.2562778-1-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/macintosh/windfarm_smu_sat.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/macintosh/windfarm_smu_sat.c b/drivers/macintosh/windfarm_smu_sat.c
index a0f61eb853c55..644e123510c52 100644
--- a/drivers/macintosh/windfarm_smu_sat.c
+++ b/drivers/macintosh/windfarm_smu_sat.c
@@ -172,6 +172,7 @@ static void wf_sat_release(struct kref *ref)
 
 	if (sat->nr >= 0)
 		sats[sat->nr] = NULL;
+	of_node_put(sat->node);
 	kfree(sat);
 }
 
-- 
2.39.2

[PATCH 4.14 058/116] powerpc/mpc512x: fix resource printk format warning

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 7538c97e2b80ff6b7a8ea2ecf16a04355461b439 ]

Use "%pa" format specifier for resource_size_t to avoid a compiler
printk format warning.

../arch/powerpc/platforms/512x/clock-commonclk.c: In function 'mpc5121_clk_provide_backwards_compat':
../arch/powerpc/platforms/512x/clock-commonclk.c:989:44: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
  989 |         snprintf(devname, sizeof(devname), "%08x.%s", res.start, np->name); \
      |                                            ^~~~~~~~~  ~~~~~~~~~
      |                                                          |
      |                                                          resource_size_t {aka long long unsigned int}

Prevents 24 such warnings.

Fixes: 01f25c371658 ("clk: mpc512x: add backwards compat to the CCF code")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230223070116.660-2-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/512x/clock-commonclk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/512x/clock-commonclk.c b/arch/powerpc/platforms/512x/clock-commonclk.c
index b3097fe6441b9..1019d78e44bb4 100644
--- a/arch/powerpc/platforms/512x/clock-commonclk.c
+++ b/arch/powerpc/platforms/512x/clock-commonclk.c
@@ -985,7 +985,7 @@ static void mpc5121_clk_provide_migration_support(void)
 
 #define NODE_PREP do { \
 	of_address_to_resource(np, 0, &res); \
-	snprintf(devname, sizeof(devname), "%08x.%s", res.start, np->name); \
+	snprintf(devname, sizeof(devname), "%pa.%s", &res.start, np->name); \
 } while (0)
 
 #define NODE_CHK(clkname, clkitem, regnode, regflag) do { \
-- 
2.39.2

[PATCH 4.14 059/116] powerpc/wii: fix resource printk format warnings

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 7b69600d4da0049244e9be2f5ef5a2f8e04fcd9a ]

Use "%pa" format specifier for resource_size_t to avoid compiler
printk format warnings.

../arch/powerpc/platforms/embedded6xx/flipper-pic.c: In function 'flipper_pic_init':
../include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
../arch/powerpc/platforms/embedded6xx/flipper-pic.c:148:9: note: in expansion of macro 'pr_info'
  148 |         pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base);
      |         ^~~~~~~

../arch/powerpc/platforms/embedded6xx/hlwd-pic.c: In function 'hlwd_pic_init':
../include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
../arch/powerpc/platforms/embedded6xx/hlwd-pic.c:174:9: note: in expansion of macro 'pr_info'
  174 |         pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base);
      |         ^~~~~~~

../arch/powerpc/platforms/embedded6xx/wii.c: In function 'wii_ioremap_hw_regs':
../include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
../arch/powerpc/platforms/embedded6xx/wii.c:77:17: note: in expansion of macro 'pr_info'
   77 |                 pr_info("%s at 0x%08x mapped to 0x%p\n", name,
      |                 ^~~~~~~

Fixes: 028ee972f032 ("powerpc: gamecube/wii: flipper interrupt controller support")
Fixes: 9c21025c7845 ("powerpc: wii: hollywood interrupt controller support")
Fixes: 5a7ee3198dfa ("powerpc: wii: platform support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230223070116.660-3-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/embedded6xx/flipper-pic.c | 2 +-
 arch/powerpc/platforms/embedded6xx/hlwd-pic.c    | 2 +-
 arch/powerpc/platforms/embedded6xx/wii.c         | 4 ++--
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/platforms/embedded6xx/flipper-pic.c b/arch/powerpc/platforms/embedded6xx/flipper-pic.c
index ade83829d5e8b..416375b346ba6 100644
--- a/arch/powerpc/platforms/embedded6xx/flipper-pic.c
+++ b/arch/powerpc/platforms/embedded6xx/flipper-pic.c
@@ -157,7 +157,7 @@ struct irq_domain * __init flipper_pic_init(struct device_node *np)
 	}
 	io_base = ioremap(res.start, resource_size(&res));
 
-	pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base);
+	pr_info("controller at 0x%pa mapped to 0x%p\n", &res.start, io_base);
 
 	__flipper_quiesce(io_base);
 
diff --git a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
index db2ea6b6889de..7b7d659fd1568 100644
--- a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
+++ b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
@@ -178,7 +178,7 @@ struct irq_domain *hlwd_pic_init(struct device_node *np)
 		return NULL;
 	}
 
-	pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base);
+	pr_info("controller at 0x%pa mapped to 0x%p\n", &res.start, io_base);
 
 	__hlwd_quiesce(io_base);
 
diff --git a/arch/powerpc/platforms/embedded6xx/wii.c b/arch/powerpc/platforms/embedded6xx/wii.c
index 2914529c06955..eabbced08d5f9 100644
--- a/arch/powerpc/platforms/embedded6xx/wii.c
+++ b/arch/powerpc/platforms/embedded6xx/wii.c
@@ -143,8 +143,8 @@ static void __iomem *wii_ioremap_hw_regs(char *name, char *compatible)
 
 	hw_regs = ioremap(res.start, resource_size(&res));
 	if (hw_regs) {
-		pr_info("%s at 0x%08x mapped to 0x%p\n", name,
-			res.start, hw_regs);
+		pr_info("%s at 0x%pa mapped to 0x%p\n", name,
+			&res.start, hw_regs);
 	}
 
 out_put:
-- 
2.39.2

[PATCH 4.14 060/116] powerpc/sysdev/tsi108: fix resource printk format warnings

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 55d8bd02cc1b9f1063993b5c42c9cabf4af67dea ]

Use "%pa" format specifier for resource_size_t to avoid a compiler
printk format warning.

  arch/powerpc/sysdev/tsi108_pci.c: In function 'tsi108_setup_pci':
  include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t'

Fixes: c4342ff92bed ("[POWERPC] Update mpc7448hpc2 board irq support using device tree")
Fixes: 2b9d7467a6db ("[POWERPC] Add tsi108 pci and platform device data register function")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
[mpe: Use pr_info() and unsplit string]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230223070116.660-5-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/sysdev/tsi108_pci.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c
index 28ff1f53cefc1..6bd50c690006f 100644
--- a/arch/powerpc/sysdev/tsi108_pci.c
+++ b/arch/powerpc/sysdev/tsi108_pci.c
@@ -229,9 +229,8 @@ int __init tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary)
 
 	(hose)->ops = &tsi108_direct_pci_ops;
 
-	printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08x. "
-	       "Firmware bus number: %d->%d\n",
-	       rsrc.start, hose->first_busno, hose->last_busno);
+	pr_info("Found tsi108 PCI host bridge at 0x%pa. Firmware bus number: %d->%d\n",
+		&rsrc.start, hose->first_busno, hose->last_busno);
 
 	/* Interpret the "ranges" property */
 	/* This also maps the I/O region and sets isa_io/mem_base */
-- 
2.39.2

[PATCH 4.14 061/116] macintosh: via-pmu-led: requires ATA to be set

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 05dce4ba125336875cd3eed3c1503fa81cd2f691 ]

LEDS_TRIGGER_DISK depends on ATA, so selecting LEDS_TRIGGER_DISK
when ATA is not set/enabled causes a Kconfig warning:

WARNING: unmet direct dependencies detected for LEDS_TRIGGER_DISK
  Depends on [n]: NEW_LEDS [=y] && LEDS_TRIGGERS [=y] && ATA [=n]
  Selected by [y]:
  - ADB_PMU_LED_DISK [=y] && MACINTOSH_DRIVERS [=y] && ADB_PMU_LED [=y] && LEDS_CLASS [=y]

Fix this by making ADB_PMU_LED_DISK depend on ATA.

Seen on both PPC32 and PPC64.

Fixes: 0e865a80c135 ("macintosh: Remove dependency on IDE_GD_ATA if ADB_PMU_LED_DISK is selected")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230223014241.20878-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/macintosh/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index 5e47d91da5193..aa42a41ba4389 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -94,6 +94,7 @@ config ADB_PMU_LED
 
 config ADB_PMU_LED_DISK
 	bool "Use front LED as DISK LED by default"
+	depends on ATA
 	depends on ADB_PMU_LED
 	depends on LEDS_CLASS
 	select LEDS_TRIGGERS
-- 
2.39.2

[PATCH 4.14 062/116] powerpc/rtas: use memmove for potentially overlapping buffer copy

[Greg Kroah-Hartman]

From: Nathan Lynch <nathanl@linux.ibm.com>

[ Upstream commit 271208ee5e335cb1ad280d22784940daf7ddf820 ]

Using memcpy() isn't safe when buf is identical to rtas_err_buf, which
can happen during boot before slab is up. Full context which may not
be obvious from the diff:

	if (altbuf) {
		buf = altbuf;
	} else {
		buf = rtas_err_buf;
		if (slab_is_available())
			buf = kmalloc(RTAS_ERROR_LOG_MAX, GFP_ATOMIC);
	}
	if (buf)
		memcpy(buf, rtas_err_buf, RTAS_ERROR_LOG_MAX);

This was found by inspection and I'm not aware of it causing problems
in practice. It appears to have been introduced by commit
033ef338b6e0 ("powerpc: Merge rtas.c into arch/powerpc/kernel"); the
old ppc64 version of this code did not have this problem.

Use memmove() instead.

Fixes: 033ef338b6e0 ("powerpc: Merge rtas.c into arch/powerpc/kernel")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220-rtas-queue-for-6-4-v1-2-010e4416f13f@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/rtas.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 5d84b412b2fd4..35f1f8b2f6253 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -400,7 +400,7 @@ static char *__fetch_rtas_last_error(char *altbuf)
 				buf = kmalloc(RTAS_ERROR_LOG_MAX, GFP_ATOMIC);
 		}
 		if (buf)
-			memcpy(buf, rtas_err_buf, RTAS_ERROR_LOG_MAX);
+			memmove(buf, rtas_err_buf, RTAS_ERROR_LOG_MAX);
 	}
 
 	return buf;
-- 
2.39.2

[PATCH 4.14 063/116] perf/core: Fix hardlockup failure caused by perf throttle

[Greg Kroah-Hartman]

From: Yang Jihong <yangjihong1@huawei.com>

[ Upstream commit 15def34e2635ab7e0e96f1bc32e1b69609f14942 ]

commit e050e3f0a71bf ("perf: Fix broken interrupt rate throttling")
introduces a change in throttling threshold judgment. Before this,
compare hwc->interrupts and max_samples_per_tick, then increase
hwc->interrupts by 1, but this commit reverses order of these two
behaviors, causing the semantics of max_samples_per_tick to change.
In literal sense of "max_samples_per_tick", if hwc->interrupts ==
max_samples_per_tick, it should not be throttled, therefore, the judgment
condition should be changed to "hwc->interrupts > max_samples_per_tick".

In fact, this may cause the hardlockup to fail, The minimum value of
max_samples_per_tick may be 1, in this case, the return value of
__perf_event_account_interrupt function is 1.
As a result, nmi_watchdog gets throttled, which would stop PMU (Use x86
architecture as an example, see x86_pmu_handle_irq).

Fixes: e050e3f0a71b ("perf: Fix broken interrupt rate throttling")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230227023508.102230-1-yangjihong1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/events/core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/events/core.c b/kernel/events/core.c
index 392e48bbba448..20ba0d90e8ae1 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -7490,8 +7490,8 @@ __perf_event_account_interrupt(struct perf_event *event, int throttle)
 		hwc->interrupts = 1;
 	} else {
 		hwc->interrupts++;
-		if (unlikely(throttle
-			     && hwc->interrupts >= max_samples_per_tick)) {
+		if (unlikely(throttle &&
+			     hwc->interrupts > max_samples_per_tick)) {
 			__this_cpu_inc(perf_throttled_count);
 			tick_dep_set_cpu(smp_processor_id(), TICK_DEP_BIT_PERF_EVENTS);
 			hwc->interrupts = MAX_INTERRUPTS;
-- 
2.39.2

[PATCH 4.14 064/116] RDMA/rdmavt: Delete unnecessary NULL check

[Greg Kroah-Hartman]

From: Natalia Petrova <n.petrova@fintech.ru>

[ Upstream commit b73a0b80c69de77d8d4942abb37066531c0169b2 ]

There is no need to check 'rdi->qp_dev' for NULL. The field 'qp_dev'
is created in rvt_register_device() which will fail if the 'qp_dev'
allocation fails in rvt_driver_qp_init(). Overwise this pointer
doesn't changed and passed to rvt_qp_exit() by the next step.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 0acb0cc7ecc1 ("IB/rdmavt: Initialize and teardown of qpn table")
Signed-off-by: Natalia Petrova <n.petrova@fintech.ru>
Link: https://lore.kernel.org/r/20230303124408.16685-1-n.petrova@fintech.ru
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/sw/rdmavt/qp.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/infiniband/sw/rdmavt/qp.c b/drivers/infiniband/sw/rdmavt/qp.c
index b0309876f4bb1..2bfcd47b58baa 100644
--- a/drivers/infiniband/sw/rdmavt/qp.c
+++ b/drivers/infiniband/sw/rdmavt/qp.c
@@ -318,8 +318,6 @@ void rvt_qp_exit(struct rvt_dev_info *rdi)
 	if (qps_inuse)
 		rvt_pr_err(rdi, "QP memory leak! %u still in use\n",
 			   qps_inuse);
-	if (!rdi->qp_dev)
-		return;
 
 	kfree(rdi->qp_dev->qp_table);
 	free_qpn_table(&rdi->qp_dev->qpn_table);
-- 
2.39.2

[PATCH 4.14 065/116] power: supply: generic-adc-battery: fix unit scaling

[Greg Kroah-Hartman]

From: Sebastian Reichel <sre@kernel.org>

[ Upstream commit 44263f50065969f2344808388bd589740f026167 ]

power-supply properties are reported in µV, µA and µW.
The IIO API provides mV, mA, mW, so the values need to
be multiplied by 1000.

Fixes: e60fea794e6e ("power: battery: Generic battery driver using IIO")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/generic-adc-battery.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/power/supply/generic-adc-battery.c b/drivers/power/supply/generic-adc-battery.c
index c5bde3c24c319..42a9e03744c7d 100644
--- a/drivers/power/supply/generic-adc-battery.c
+++ b/drivers/power/supply/generic-adc-battery.c
@@ -138,6 +138,9 @@ static int read_channel(struct gab *adc_bat, enum power_supply_property psp,
 			result);
 	if (ret < 0)
 		pr_err("read channel error\n");
+	else
+		*result *= 1000;
+
 	return ret;
 }
 
-- 
2.39.2

[PATCH 4.14 066/116] clk: add missing of_node_put() in "assigned-clocks" property parsing

[Greg Kroah-Hartman]

From: Clément Léger <clement.leger@bootlin.com>

[ Upstream commit 27a6e1b09a782517fddac91259970ac466a3f7b6 ]

When returning from of_parse_phandle_with_args(), the np member of the
of_phandle_args structure should be put after usage. Add missing
of_node_put() calls in both __set_clk_parents() and __set_clk_rates().

Fixes: 86be408bfbd8 ("clk: Support for clock parents and rates assigned from device tree")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Link: https://lore.kernel.org/r/20230131083227.10990-1-clement.leger@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/clk-conf.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/clk-conf.c b/drivers/clk/clk-conf.c
index 49819b546134b..5c6760e45a16e 100644
--- a/drivers/clk/clk-conf.c
+++ b/drivers/clk/clk-conf.c
@@ -36,9 +36,12 @@ static int __set_clk_parents(struct device_node *node, bool clk_supplier)
 			else
 				return rc;
 		}
-		if (clkspec.np == node && !clk_supplier)
+		if (clkspec.np == node && !clk_supplier) {
+			of_node_put(clkspec.np);
 			return 0;
+		}
 		pclk = of_clk_get_from_provider(&clkspec);
+		of_node_put(clkspec.np);
 		if (IS_ERR(pclk)) {
 			if (PTR_ERR(pclk) != -EPROBE_DEFER)
 				pr_warn("clk: couldn't get parent clock %d for %pOF\n",
@@ -51,10 +54,12 @@ static int __set_clk_parents(struct device_node *node, bool clk_supplier)
 		if (rc < 0)
 			goto err;
 		if (clkspec.np == node && !clk_supplier) {
+			of_node_put(clkspec.np);
 			rc = 0;
 			goto err;
 		}
 		clk = of_clk_get_from_provider(&clkspec);
+		of_node_put(clkspec.np);
 		if (IS_ERR(clk)) {
 			if (PTR_ERR(clk) != -EPROBE_DEFER)
 				pr_warn("clk: couldn't get assigned clock %d for %pOF\n",
@@ -96,10 +101,13 @@ static int __set_clk_rates(struct device_node *node, bool clk_supplier)
 				else
 					return rc;
 			}
-			if (clkspec.np == node && !clk_supplier)
+			if (clkspec.np == node && !clk_supplier) {
+				of_node_put(clkspec.np);
 				return 0;
+			}
 
 			clk = of_clk_get_from_provider(&clkspec);
+			of_node_put(clkspec.np);
 			if (IS_ERR(clk)) {
 				if (PTR_ERR(clk) != -EPROBE_DEFER)
 					pr_warn("clk: couldn't get clock %d for %pOF\n",
-- 
2.39.2

[PATCH 4.14 067/116] IB/hfi1: Fix SDMA mmu_rb_node not being evicted in LRU order

[Greg Kroah-Hartman]

From: Patrick Kelsey <pat.kelsey@cornelisnetworks.com>

[ Upstream commit 9fe8fec5e43d5a80f43cbf61aaada1b047a1eb61 ]

hfi1_mmu_rb_remove_unless_exact() did not move mmu_rb_node objects in
mmu_rb_handler->lru_list after getting a cache hit on an mmu_rb_node.

As a result, hfi1_mmu_rb_evict() was not guaranteed to evict truly
least-recently used nodes.

This could be a performance issue for an application when that
application:
- Uses some long-lived buffers frequently.
- Uses a large number of buffers once.
- Hits the mmu_rb_handler cache size or pinned-page limits, forcing
  mmu_rb_handler cache entries to be evicted.

In this case, the one-time use buffers cause the long-lived buffer
entries to eventually filter to the end of the LRU list where
hfi1_mmu_rb_evict() will consider evicting a frequently-used long-lived
entry instead of evicting one of the one-time use entries.

Fix this by inserting new mmu_rb_node at the tail of
mmu_rb_handler->lru_list and move mmu_rb_ndoe to the tail of
mmu_rb_handler->lru_list when the mmu_rb_node is a hit in
hfi1_mmu_rb_remove_unless_exact(). Change hfi1_mmu_rb_evict() to evict
from the head of mmu_rb_handler->lru_list instead of the tail.

Fixes: 0636e9ab8355 ("IB/hfi1: Add cache evict LRU list")
Signed-off-by: Brendan Cunningham <bcunningham@cornelisnetworks.com>
Signed-off-by: Patrick Kelsey <pat.kelsey@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Link: https://lore.kernel.org/r/168088635931.3027109.10423156330761536044.stgit@252.162.96.66.static.eigbox.net
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/hfi1/mmu_rb.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/infiniband/hw/hfi1/mmu_rb.c b/drivers/infiniband/hw/hfi1/mmu_rb.c
index 175002c046ede..42eddaf3a9947 100644
--- a/drivers/infiniband/hw/hfi1/mmu_rb.c
+++ b/drivers/infiniband/hw/hfi1/mmu_rb.c
@@ -177,7 +177,7 @@ int hfi1_mmu_rb_insert(struct mmu_rb_handler *handler,
 		goto unlock;
 	}
 	__mmu_int_rb_insert(mnode, &handler->root);
-	list_add(&mnode->list, &handler->lru_list);
+	list_add_tail(&mnode->list, &handler->lru_list);
 
 	ret = handler->ops->insert(handler->ops_arg, mnode);
 	if (ret) {
@@ -224,8 +224,10 @@ bool hfi1_mmu_rb_remove_unless_exact(struct mmu_rb_handler *handler,
 	spin_lock_irqsave(&handler->lock, flags);
 	node = __mmu_rb_search(handler, addr, len);
 	if (node) {
-		if (node->addr == addr && node->len == len)
+		if (node->addr == addr && node->len == len) {
+			list_move_tail(&node->list, &handler->lru_list);
 			goto unlock;
+		}
 		__mmu_int_rb_remove(node, &handler->root);
 		list_del(&node->list); /* remove from LRU list */
 		ret = true;
@@ -246,8 +248,7 @@ void hfi1_mmu_rb_evict(struct mmu_rb_handler *handler, void *evict_arg)
 	INIT_LIST_HEAD(&del_list);
 
 	spin_lock_irqsave(&handler->lock, flags);
-	list_for_each_entry_safe_reverse(rbnode, ptr, &handler->lru_list,
-					 list) {
+	list_for_each_entry_safe(rbnode, ptr, &handler->lru_list, list) {
 		if (handler->ops->evict(handler->ops_arg, rbnode, evict_arg,
 					&stop)) {
 			__mmu_int_rb_remove(rbnode, &handler->root);
@@ -259,9 +260,7 @@ void hfi1_mmu_rb_evict(struct mmu_rb_handler *handler, void *evict_arg)
 	}
 	spin_unlock_irqrestore(&handler->lock, flags);
 
-	while (!list_empty(&del_list)) {
-		rbnode = list_first_entry(&del_list, struct mmu_rb_node, list);
-		list_del(&rbnode->list);
+	list_for_each_entry_safe(rbnode, ptr, &del_list, list) {
 		handler->ops->remove(handler->ops_arg, rbnode);
 	}
 }
-- 
2.39.2

[PATCH 4.14 068/116] NFSv4.1: Always send a RECLAIM_COMPLETE after establishing lease

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit 40882deb83c29d8df4470d4e5e7f137b6acf7ad1 ]

The spec requires that we always at least send a RECLAIM_COMPLETE when
we're done establishing the lease and recovering any state.

Fixes: fce5c838e133 ("nfs41: RECLAIM_COMPLETE functionality")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs4state.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index 9616f7eacd4cb..85e005efc9779 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -65,6 +65,8 @@
 
 #define OPENOWNER_POOL_SIZE	8
 
+static void nfs4_state_start_reclaim_reboot(struct nfs_client *clp);
+
 const nfs4_stateid zero_stateid = {
 	{ .data = { 0 } },
 	.type = NFS4_SPECIAL_STATEID_TYPE,
@@ -321,6 +323,8 @@ int nfs41_init_clientid(struct nfs_client *clp, struct rpc_cred *cred)
 	status = nfs4_proc_create_session(clp, cred);
 	if (status != 0)
 		goto out;
+	if (!(clp->cl_exchange_flags & EXCHGID4_FLAG_CONFIRMED_R))
+		nfs4_state_start_reclaim_reboot(clp);
 	nfs41_finish_session_reset(clp);
 	nfs_mark_client_ready(clp, NFS_CS_READY);
 out:
-- 
2.39.2

[PATCH 4.14 069/116] SUNRPC: remove the maximum number of retries in call_bind_status

[Greg Kroah-Hartman]

From: Dai Ngo <dai.ngo@oracle.com>

[ Upstream commit 691d0b782066a6eeeecbfceb7910a8f6184e6105 ]

Currently call_bind_status places a hard limit of 3 to the number of
retries on EACCES error. This limit was done to prevent NLM unlock
requests from being hang forever when the server keeps returning garbage.
However this change causes problem for cases when NLM service takes
longer than 9 seconds to register with the port mapper after a restart.

This patch removes this hard coded limit and let the RPC handles
the retry based on the standard hard/soft task semantics.

Fixes: 0b760113a3a1 ("NLM: Don't hang forever on NLM unlock requests")
Reported-by: Helen Chao <helen.chao@oracle.com>
Tested-by: Helen Chao <helen.chao@oracle.com>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/sunrpc/sched.h | 3 +--
 net/sunrpc/clnt.c            | 3 ---
 net/sunrpc/sched.c           | 1 -
 3 files changed, 1 insertion(+), 6 deletions(-)

diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h
index c9548a63d09bb..0f7c8f820aa3f 100644
--- a/include/linux/sunrpc/sched.h
+++ b/include/linux/sunrpc/sched.h
@@ -88,8 +88,7 @@ struct rpc_task {
 #endif
 	unsigned char		tk_priority : 2,/* Task priority */
 				tk_garb_retry : 2,
-				tk_cred_retry : 2,
-				tk_rebind_retry : 2;
+				tk_cred_retry : 2;
 };
 
 typedef void			(*rpc_action)(struct rpc_task *);
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index 411925b043cce..de917d45e512a 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -1827,9 +1827,6 @@ call_bind_status(struct rpc_task *task)
 			status = -EOPNOTSUPP;
 			break;
 		}
-		if (task->tk_rebind_retry == 0)
-			break;
-		task->tk_rebind_retry--;
 		rpc_delay(task, 3*HZ);
 		goto retry_timeout;
 	case -ETIMEDOUT:
diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c
index 4e0ebb4780df8..b368f5aabe291 100644
--- a/net/sunrpc/sched.c
+++ b/net/sunrpc/sched.c
@@ -697,7 +697,6 @@ rpc_init_task_statistics(struct rpc_task *task)
 	/* Initialize retry counters */
 	task->tk_garb_retry = 2;
 	task->tk_cred_retry = 2;
-	task->tk_rebind_retry = 2;
 
 	/* starting timestamp */
 	task->tk_start = ktime_get();
-- 
2.39.2

[PATCH 4.14 070/116] phy: tegra: xusb: Add missing tegra_xusb_port_unregister for usb2_port and ulpi_port

[Greg Kroah-Hartman]

From: Gaosheng Cui <cuigaosheng1@huawei.com>

[ Upstream commit e024854048e733391b31fe5a398704b31b9af803 ]

The tegra_xusb_port_unregister should be called when usb2_port
and ulpi_port map fails in tegra_xusb_add_usb2_port() or in
tegra_xusb_add_ulpi_port(), fix it.

Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20221129111634.1547747-1-cuigaosheng1@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/tegra/xusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
index 9c55e0f45ea8a..d0483712637b9 100644
--- a/drivers/phy/tegra/xusb.c
+++ b/drivers/phy/tegra/xusb.c
@@ -596,6 +596,7 @@ static int tegra_xusb_add_usb2_port(struct tegra_xusb_padctl *padctl,
 	usb2->base.lane = usb2->base.ops->map(&usb2->base);
 	if (IS_ERR(usb2->base.lane)) {
 		err = PTR_ERR(usb2->base.lane);
+		tegra_xusb_port_unregister(&usb2->base);
 		goto out;
 	}
 
@@ -648,6 +649,7 @@ static int tegra_xusb_add_ulpi_port(struct tegra_xusb_padctl *padctl,
 	ulpi->base.lane = ulpi->base.ops->map(&ulpi->base);
 	if (IS_ERR(ulpi->base.lane)) {
 		err = PTR_ERR(ulpi->base.lane);
+		tegra_xusb_port_unregister(&ulpi->base);
 		goto out;
 	}
 
-- 
2.39.2

[PATCH 4.14 071/116] dmaengine: at_xdmac: do not enable all cyclic channels

[Greg Kroah-Hartman]

From: Claudiu Beznea <claudiu.beznea@microchip.com>

[ Upstream commit f8435befd81dd85b7b610598551fadf675849bc1 ]

Do not global enable all the cyclic channels in at_xdmac_resume(). Instead
save the global status in at_xdmac_suspend() and re-enable the cyclic
channel only if it was active before suspend.

Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230214151827.1050280-6-claudiu.beznea@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/at_xdmac.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c
index c8dd0eef0b67b..3f9f1d6e3b501 100644
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -223,6 +223,7 @@ struct at_xdmac {
 	int			irq;
 	struct clk		*clk;
 	u32			save_gim;
+	u32			save_gs;
 	struct dma_pool		*at_xdmac_desc_pool;
 	struct at_xdmac_chan	chan[0];
 };
@@ -1880,6 +1881,7 @@ static int atmel_xdmac_suspend(struct device *dev)
 		}
 	}
 	atxdmac->save_gim = at_xdmac_read(atxdmac, AT_XDMAC_GIM);
+	atxdmac->save_gs = at_xdmac_read(atxdmac, AT_XDMAC_GS);
 
 	at_xdmac_off(atxdmac);
 	clk_disable_unprepare(atxdmac->clk);
@@ -1917,7 +1919,8 @@ static int atmel_xdmac_resume(struct device *dev)
 			at_xdmac_chan_write(atchan, AT_XDMAC_CNDC, atchan->save_cndc);
 			at_xdmac_chan_write(atchan, AT_XDMAC_CIE, atchan->save_cim);
 			wmb();
-			at_xdmac_write(atxdmac, AT_XDMAC_GE, atchan->mask);
+			if (atxdmac->save_gs & atchan->mask)
+				at_xdmac_write(atxdmac, AT_XDMAC_GE, atchan->mask);
 		}
 	}
 	return 0;
-- 
2.39.2

[PATCH 4.14 072/116] parisc: Fix argument pointer in real64_call_asm()

[Greg Kroah-Hartman]

From: Helge Deller <deller@gmx.de>

commit 6e3220ba3323a2c24be834aebf5d6e9f89d0993f upstream.

Fix the argument pointer (ap) to point to real-mode memory
instead of virtual memory.

It's interesting that this issue hasn't shown up earlier, as this could
have happened with any 64-bit PDC ROM code.

I just noticed it because I suddenly faced a HPMC while trying to execute
the 64-bit STI ROM code of an Visualize-FXe graphics card for the STI
text console.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/parisc/kernel/real2.S |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/arch/parisc/kernel/real2.S
+++ b/arch/parisc/kernel/real2.S
@@ -254,9 +254,6 @@ ENTRY_CFI(real64_call_asm)
 	/* save fn */
 	copy	%arg2, %r31
 
-	/* set up the new ap */
-	ldo	64(%arg1), %r29
-
 	/* load up the arg registers from the saved arg area */
 	/* 32-bit calling convention passes first 4 args in registers */
 	ldd	0*REG_SZ(%arg1), %arg0		/* note overwriting arg0 */
@@ -268,7 +265,9 @@ ENTRY_CFI(real64_call_asm)
 	ldd	7*REG_SZ(%arg1), %r19
 	ldd	1*REG_SZ(%arg1), %arg1		/* do this one last! */
 
+	/* set up real-mode stack and real-mode ap */
 	tophys_r1 %sp
+	ldo	-16(%sp), %r29			/* Reference param save area */
 
 	b,l	rfi_virt2real,%r2
 	nop

[PATCH 4.14 073/116] nilfs2: do not write dirty data after degenerating to read-only

[Greg Kroah-Hartman]

From: Ryusuke Konishi <konishi.ryusuke@gmail.com>

commit 28a65b49eb53e172d23567005465019658bfdb4d upstream.

According to syzbot's report, mark_buffer_dirty() called from
nilfs_segctor_do_construct() outputs a warning with some patterns after
nilfs2 detects metadata corruption and degrades to read-only mode.

After such read-only degeneration, page cache data may be cleared through
nilfs_clear_dirty_page() which may also clear the uptodate flag for their
buffer heads.  However, even after the degeneration, log writes are still
performed by unmount processing etc., which causes mark_buffer_dirty() to
be called for buffer heads without the "uptodate" flag and causes the
warning.

Since any writes should not be done to a read-only file system in the
first place, this fixes the warning in mark_buffer_dirty() by letting
nilfs_segctor_do_construct() abort early if in read-only mode.

This also changes the retry check of nilfs_segctor_write_out() to avoid
unnecessary log write retries if it detects -EROFS that
nilfs_segctor_do_construct() returned.

Link: https://lkml.kernel.org/r/20230427011526.13457-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+2af3bc9585be7f23f290@syzkaller.appspotmail.com
  Link: https://syzkaller.appspot.com/bug?extid=2af3bc9585be7f23f290
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nilfs2/segment.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -2052,6 +2052,9 @@ static int nilfs_segctor_do_construct(st
 	struct the_nilfs *nilfs = sci->sc_super->s_fs_info;
 	int err;
 
+	if (sb_rdonly(sci->sc_super))
+		return -EROFS;
+
 	nilfs_sc_cstage_set(sci, NILFS_ST_INIT);
 	sci->sc_cno = nilfs->ns_cno;
 
@@ -2738,7 +2741,7 @@ static void nilfs_segctor_write_out(stru
 
 		flush_work(&sci->sc_iput_work);
 
-	} while (ret && retrycount-- > 0);
+	} while (ret && ret != -EROFS && retrycount-- > 0);
 }
 
 /**

[PATCH 4.14 074/116] nilfs2: fix infinite loop in nilfs_mdt_get_block()

[Greg Kroah-Hartman]

From: Ryusuke Konishi <konishi.ryusuke@gmail.com>

commit a6a491c048882e7e424d407d32cba0b52d9ef2bf upstream.

If the disk image that nilfs2 mounts is corrupted and a virtual block
address obtained by block lookup for a metadata file is invalid,
nilfs_bmap_lookup_at_level() may return the same internal return code as
-ENOENT, meaning the block does not exist in the metadata file.

This duplication of return codes confuses nilfs_mdt_get_block(), causing
it to read and create a metadata block indefinitely.

In particular, if this happens to the inode metadata file, ifile,
semaphore i_rwsem can be left held, causing task hangs in lock_mount.

Fix this issue by making nilfs_bmap_lookup_at_level() treat virtual block
address translation failures with -ENOENT as metadata corruption instead
of returning the error code.

Link: https://lkml.kernel.org/r/20230430193046.6769-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+221d75710bde87fa0e97@syzkaller.appspotmail.com
  Link: https://syzkaller.appspot.com/bug?extid=221d75710bde87fa0e97
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nilfs2/bmap.c |   16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

--- a/fs/nilfs2/bmap.c
+++ b/fs/nilfs2/bmap.c
@@ -76,20 +76,28 @@ int nilfs_bmap_lookup_at_level(struct ni
 
 	down_read(&bmap->b_sem);
 	ret = bmap->b_ops->bop_lookup(bmap, key, level, ptrp);
-	if (ret < 0) {
-		ret = nilfs_bmap_convert_error(bmap, __func__, ret);
+	if (ret < 0)
 		goto out;
-	}
+
 	if (NILFS_BMAP_USE_VBN(bmap)) {
 		ret = nilfs_dat_translate(nilfs_bmap_get_dat(bmap), *ptrp,
 					  &blocknr);
 		if (!ret)
 			*ptrp = blocknr;
+		else if (ret == -ENOENT) {
+			/*
+			 * If there was no valid entry in DAT for the block
+			 * address obtained by b_ops->bop_lookup, then pass
+			 * internal code -EINVAL to nilfs_bmap_convert_error
+			 * to treat it as metadata corruption.
+			 */
+			ret = -EINVAL;
+		}
 	}
 
  out:
 	up_read(&bmap->b_sem);
-	return ret;
+	return nilfs_bmap_convert_error(bmap, __func__, ret);
 }
 
 int nilfs_bmap_lookup_contig(struct nilfs_bmap *bmap, __u64 key, __u64 *ptrp,

[PATCH 4.14 075/116] wifi: rtl8xxxu: RTL8192EU always needs full init

[Greg Kroah-Hartman]

From: Bitterblue Smith <rtl8821cerfe2@gmail.com>

commit d46e04ccd40457a0119b76e11ab64a2ad403e138 upstream.

Always run the entire init sequence (rtl8xxxu_init_device()) for
RTL8192EU. It's what the vendor driver does too.

This fixes a bug where the device is unable to connect after
rebooting:

wlp3s0f3u2: send auth to ... (try 1/3)
wlp3s0f3u2: send auth to ... (try 2/3)
wlp3s0f3u2: send auth to ... (try 3/3)
wlp3s0f3u2: authentication with ... timed out

Rebooting leaves the device powered on (partially? at least the
firmware is still running), but not really in a working state.

Cc: stable@vger.kernel.org
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Jes Sorensen <jes@trained-monkey.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/4eb111a9-d4c4-37d0-b376-4e202de7153c@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
@@ -1660,6 +1660,7 @@ struct rtl8xxxu_fileops rtl8192eu_fops =
 	.rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24),
 	.has_s0s1 = 0,
 	.gen2_thermal_meter = 1,
+	.needs_full_init = 1,
 	.adda_1t_init = 0x0fc01616,
 	.adda_1t_path_on = 0x0fc01616,
 	.adda_2t_path_on_a = 0x0fc01616,

[PATCH 4.14 076/116] clk: rockchip: rk3399: allow clk_cifout to force clk_cifout_src to reparent

[Greg Kroah-Hartman]

From: Quentin Schulz <quentin.schulz@theobroma-systems.com>

commit 933bf364e152cd60902cf9585c2ba310d593e69f upstream.

clk_cifout is derived from clk_cifout_src through an integer divider
limited to 32. clk_cifout_src is a child of either cpll, gpll or npll
without any possibility of a divider of any sort. The default clock
parent is cpll.

Let's allow clk_cifout to ask its parent clk_cifout_src to reparent in
order to find the real closest possible rate for clk_cifout and not one
derived from cpll only.

Cc: stable@vger.kernel.org # 4.10+
Fixes: fd8bc829336a ("clk: rockchip: fix the rk3399 cifout clock")
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20221117-rk3399-cifout-set-rate-parent-v1-0-432548d04081@theobroma-systems.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/clk/rockchip/clk-rk3399.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/clk/rockchip/clk-rk3399.c
+++ b/drivers/clk/rockchip/clk-rk3399.c
@@ -1266,7 +1266,7 @@ static struct rockchip_clk_branch rk3399
 			RK3399_CLKSEL_CON(56), 6, 2, MFLAGS,
 			RK3399_CLKGATE_CON(10), 7, GFLAGS),
 
-	COMPOSITE_NOGATE(SCLK_CIF_OUT, "clk_cifout", mux_clk_cif_p, 0,
+	COMPOSITE_NOGATE(SCLK_CIF_OUT, "clk_cifout", mux_clk_cif_p, CLK_SET_RATE_PARENT,
 			 RK3399_CLKSEL_CON(56), 5, 1, MFLAGS, 0, 5, DFLAGS),
 
 	/* gic */

[PATCH 4.14 077/116] btrfs: scrub: reject unsupported scrub flags

[Greg Kroah-Hartman]

From: Qu Wenruo <wqu@suse.com>

commit 604e6681e114d05a2e384c4d1e8ef81918037ef5 upstream.

Since the introduction of scrub interface, the only flag that we support
is BTRFS_SCRUB_READONLY.  Thus there is no sanity checks, if there are
some undefined flags passed in, we just ignore them.

This is problematic if we want to introduce new scrub flags, as we have
no way to determine if such flags are supported.

Address the problem by introducing a check for the flags, and if
unsupported flags are set, return -EOPNOTSUPP to inform the user space.

This check should be backported for all supported kernels before any new
scrub flags are introduced.

CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/ioctl.c           |    5 +++++
 include/uapi/linux/btrfs.h |    1 +
 2 files changed, 6 insertions(+)

--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -4442,6 +4442,11 @@ static long btrfs_ioctl_scrub(struct fil
 	if (IS_ERR(sa))
 		return PTR_ERR(sa);
 
+	if (sa->flags & ~BTRFS_SCRUB_SUPPORTED_FLAGS) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
 	if (!(sa->flags & BTRFS_SCRUB_READONLY)) {
 		ret = mnt_want_write_file(file);
 		if (ret)
--- a/include/uapi/linux/btrfs.h
+++ b/include/uapi/linux/btrfs.h
@@ -161,6 +161,7 @@ struct btrfs_scrub_progress {
 };
 
 #define BTRFS_SCRUB_READONLY	1
+#define BTRFS_SCRUB_SUPPORTED_FLAGS	(BTRFS_SCRUB_READONLY)
 struct btrfs_ioctl_scrub_args {
 	__u64 devid;				/* in */
 	__u64 start;				/* in */

[PATCH 4.14 078/116] s390/dasd: fix hanging blockdevice after request requeue

[Greg Kroah-Hartman]

From: Stefan Haberland <sth@linux.ibm.com>

commit d8898ee50edecacdf0141f26fd90acf43d7e9cd7 upstream.

The DASD driver does not kick the requeue list when requeuing IO requests
to the blocklayer. This might lead to hanging blockdevice when there is
no other trigger for this.

Fix by automatically kick the requeue list when requeuing DASD requests
to the blocklayer.

Fixes: e443343e509a ("s390/dasd: blk-mq conversion")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-8-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/s390/block/dasd.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -2899,7 +2899,7 @@ static int _dasd_requeue_request(struct
 		return 0;
 	spin_lock_irq(&cqr->dq->lock);
 	req = (struct request *) cqr->callback_data;
-	blk_mq_requeue_request(req, false);
+	blk_mq_requeue_request(req, true);
 	spin_unlock_irq(&cqr->dq->lock);
 
 	return 0;

[PATCH 4.14 079/116] dm integrity: call kmem_cache_destroy() in dm_integrity_init() error path

[Greg Kroah-Hartman]

From: Mike Snitzer <snitzer@kernel.org>

commit 6b79a428c02769f2a11f8ae76bf866226d134887 upstream.

Otherwise the journal_io_cache will leak if dm_register_target() fails.

Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/dm-integrity.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/drivers/md/dm-integrity.c
+++ b/drivers/md/dm-integrity.c
@@ -3274,11 +3274,13 @@ int __init dm_integrity_init(void)
 	}
 
 	r = dm_register_target(&integrity_target);
-
-	if (r < 0)
+	if (r < 0) {
 		DMERR("register failed %d", r);
+		kmem_cache_destroy(journal_io_cache);
+		return r;
+	}
 
-	return r;
+	return 0;
 }
 
 void dm_integrity_exit(void)

[PATCH 4.14 080/116] dm flakey: fix a crash with invalid table line

[Greg Kroah-Hartman]

From: Mikulas Patocka <mpatocka@redhat.com>

commit 98dba02d9a93eec11bffbb93c7c51624290702d2 upstream.

This command will crash with NULL pointer dereference:
 dmsetup create flakey --table \
  "0 `blockdev --getsize /dev/ram0` flakey /dev/ram0 0 0 1 2 corrupt_bio_byte 512"

Fix the crash by checking if arg_name is non-NULL before comparing it.

Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/dm-flakey.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/md/dm-flakey.c
+++ b/drivers/md/dm-flakey.c
@@ -124,9 +124,9 @@ static int parse_features(struct dm_arg_
 			 * Direction r or w?
 			 */
 			arg_name = dm_shift_arg(as);
-			if (!strcasecmp(arg_name, "w"))
+			if (arg_name && !strcasecmp(arg_name, "w"))
 				fc->corrupt_bio_rw = WRITE;
-			else if (!strcasecmp(arg_name, "r"))
+			else if (arg_name && !strcasecmp(arg_name, "r"))
 				fc->corrupt_bio_rw = READ;
 			else {
 				ti->error = "Invalid corrupt bio direction (r or w)";

[PATCH 4.14 081/116] dm ioctl: fix nested locking in table_clear() to remove deadlock concern

[Greg Kroah-Hartman]

From: Mike Snitzer <snitzer@kernel.org>

commit 3d32aaa7e66d5c1479a3c31d6c2c5d45dd0d3b89 upstream.

syzkaller found the following problematic rwsem locking (with write
lock already held):

 down_read+0x9d/0x450 kernel/locking/rwsem.c:1509
 dm_get_inactive_table+0x2b/0xc0 drivers/md/dm-ioctl.c:773
 __dev_status+0x4fd/0x7c0 drivers/md/dm-ioctl.c:844
 table_clear+0x197/0x280 drivers/md/dm-ioctl.c:1537

In table_clear, it first acquires a write lock
https://elixir.bootlin.com/linux/v6.2/source/drivers/md/dm-ioctl.c#L1520
down_write(&_hash_lock);

Then before the lock is released at L1539, there is a path shown above:
table_clear -> __dev_status -> dm_get_inactive_table ->  down_read
https://elixir.bootlin.com/linux/v6.2/source/drivers/md/dm-ioctl.c#L773
down_read(&_hash_lock);

It tries to acquire the same read lock again, resulting in the deadlock
problem.

Fix this by moving table_clear()'s __dev_status() call to after its
up_write(&_hash_lock);

Cc: stable@vger.kernel.org
Reported-by: Zheng Zhang <zheng.zhang@email.ucr.edu>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/dm-ioctl.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/md/dm-ioctl.c
+++ b/drivers/md/dm-ioctl.c
@@ -1409,11 +1409,12 @@ static int table_clear(struct file *filp
 		hc->new_map = NULL;
 	}
 
-	param->flags &= ~DM_INACTIVE_PRESENT_FLAG;
-
-	__dev_status(hc->md, param);
 	md = hc->md;
 	up_write(&_hash_lock);
+
+	param->flags &= ~DM_INACTIVE_PRESENT_FLAG;
+	__dev_status(md, param);
+
 	if (old_map) {
 		dm_sync_table(md);
 		dm_table_destroy(old_map);

[PATCH 4.14 082/116] perf auxtrace: Fix address filter entire kernel size

[Greg Kroah-Hartman]

From: Adrian Hunter <adrian.hunter@intel.com>

commit 1f9f33ccf0320be21703d9195dd2b36a1c9a07cb upstream.

kallsyms is not completely in address order.

In find_entire_kern_cb(), calculate the kernel end from the maximum
address not the last symbol.

Example:

 Before:

    $ sudo cat /proc/kallsyms | grep ' [twTw] ' | tail -1
    ffffffffc00b8bd0 t bpf_prog_6deef7357e7b4530    [bpf]
    $ sudo cat /proc/kallsyms | grep ' [twTw] ' | sort | tail -1
    ffffffffc15e0cc0 t iwl_mvm_exit [iwlmvm]
    $ perf.d093603a05aa record -v --kcore -e intel_pt// --filter 'filter *' -- uname |& grep filter
    Address filter: filter 0xffffffff93200000/0x2ceba000

 After:

    $ perf.8fb0f7a01f8e record -v --kcore -e intel_pt// --filter 'filter *' -- uname |& grep filter
    Address filter: filter 0xffffffff93200000/0x2e3e2000

Fixes: 1b36c03e356936d6 ("perf record: Add support for using symbols in address filters")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230403154831.8651-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/util/auxtrace.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/tools/perf/util/auxtrace.c
+++ b/tools/perf/util/auxtrace.c
@@ -1776,6 +1776,7 @@ static int find_entire_kern_cb(void *arg
 			       char type, u64 start)
 {
 	struct sym_args *args = arg;
+	u64 size;
 
 	if (!symbol_type__is_a(type, MAP__FUNCTION))
 		return 0;
@@ -1785,7 +1786,9 @@ static int find_entire_kern_cb(void *arg
 		args->start = start;
 	}
 	/* Don't know exactly where the kernel ends, so we add a page */
-	args->size = round_up(start, page_size) + page_size - args->start;
+	size = round_up(start, page_size) + page_size - args->start;
+	if (size > args->size)
+		args->size = size;
 
 	return 0;
 }

[PATCH 4.14 083/116] netfilter: nf_tables: split set destruction in deactivate and destroy phase

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

[ backport for 4.14 of cd5125d8f51882279f50506bb9c7e5e89dc9bef3 ]

Splits unbind_set into destroy_set and unbinding operation.

Unbinding removes set from lists (so new transaction would not
find it anymore) but keeps memory allocated (so packet path continues
to work).

Rebind function is added to allow unrolling in case transaction
that wants to remove set is aborted.

Destroy function is added to free the memory, but this could occur
outside of transaction in the future.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/netfilter/nf_tables.h |  7 +++++-
 net/netfilter/nf_tables_api.c     | 36 +++++++++++++++++++++----------
 net/netfilter/nft_dynset.c        | 21 +++++++++++++++++-
 net/netfilter/nft_lookup.c        | 20 ++++++++++++++++-
 net/netfilter/nft_objref.c        | 20 ++++++++++++++++-
 5 files changed, 89 insertions(+), 15 deletions(-)

diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h
index 3107895115c25..59da90bb840d9 100644
--- a/include/net/netfilter/nf_tables.h
+++ b/include/net/netfilter/nf_tables.h
@@ -463,6 +463,9 @@ int nf_tables_bind_set(const struct nft_ctx *ctx, struct nft_set *set,
 		       struct nft_set_binding *binding);
 void nf_tables_unbind_set(const struct nft_ctx *ctx, struct nft_set *set,
 			  struct nft_set_binding *binding);
+void nf_tables_rebind_set(const struct nft_ctx *ctx, struct nft_set *set,
+			  struct nft_set_binding *binding);
+void nf_tables_destroy_set(const struct nft_ctx *ctx, struct nft_set *set);
 
 /**
  *	enum nft_set_extensions - set extension type IDs
@@ -716,7 +719,9 @@ struct nft_expr_type {
  *	@eval: Expression evaluation function
  *	@size: full expression size, including private data size
  *	@init: initialization function
- *	@destroy: destruction function
+ *	@activate: activate expression in the next generation
+ *	@deactivate: deactivate expression in next generation
+ *	@destroy: destruction function, called after synchronize_rcu
  *	@dump: function to dump parameters
  *	@type: expression type
  *	@validate: validate expression, called during loop detection
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index b24c83cf64b97..39416c568d181 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -327,7 +327,7 @@ static int nft_delrule_by_chain(struct nft_ctx *ctx)
 	return 0;
 }
 
-static int nft_trans_set_add(struct nft_ctx *ctx, int msg_type,
+static int nft_trans_set_add(const struct nft_ctx *ctx, int msg_type,
 			     struct nft_set *set)
 {
 	struct nft_trans *trans;
@@ -347,7 +347,7 @@ static int nft_trans_set_add(struct nft_ctx *ctx, int msg_type,
 	return 0;
 }
 
-static int nft_delset(struct nft_ctx *ctx, struct nft_set *set)
+static int nft_delset(const struct nft_ctx *ctx, struct nft_set *set)
 {
 	int err;
 
@@ -3311,13 +3311,6 @@ static void nft_set_destroy(struct nft_set *set)
 	kvfree(set);
 }
 
-static void nf_tables_set_destroy(const struct nft_ctx *ctx, struct nft_set *set)
-{
-	list_del_rcu(&set->list);
-	nf_tables_set_notify(ctx, set, NFT_MSG_DELSET, GFP_ATOMIC);
-	nft_set_destroy(set);
-}
-
 static int nf_tables_delset(struct net *net, struct sock *nlsk,
 			    struct sk_buff *skb, const struct nlmsghdr *nlh,
 			    const struct nlattr * const nla[],
@@ -3400,17 +3393,38 @@ int nf_tables_bind_set(const struct nft_ctx *ctx, struct nft_set *set,
 }
 EXPORT_SYMBOL_GPL(nf_tables_bind_set);
 
-void nf_tables_unbind_set(const struct nft_ctx *ctx, struct nft_set *set,
+void nf_tables_rebind_set(const struct nft_ctx *ctx, struct nft_set *set,
 			  struct nft_set_binding *binding)
+{
+	if (list_empty(&set->bindings) && set->flags & NFT_SET_ANONYMOUS &&
+	    nft_is_active(ctx->net, set))
+		list_add_tail_rcu(&set->list, &ctx->table->sets);
+
+	list_add_tail_rcu(&binding->list, &set->bindings);
+}
+EXPORT_SYMBOL_GPL(nf_tables_rebind_set);
+
+void nf_tables_unbind_set(const struct nft_ctx *ctx, struct nft_set *set,
+		          struct nft_set_binding *binding)
 {
 	list_del_rcu(&binding->list);
 
 	if (list_empty(&set->bindings) && set->flags & NFT_SET_ANONYMOUS &&
 	    nft_is_active(ctx->net, set))
-		nf_tables_set_destroy(ctx, set);
+		list_del_rcu(&set->list);
 }
 EXPORT_SYMBOL_GPL(nf_tables_unbind_set);
 
+void nf_tables_destroy_set(const struct nft_ctx *ctx, struct nft_set *set)
+{
+	if (list_empty(&set->bindings) && set->flags & NFT_SET_ANONYMOUS &&
+	    nft_is_active(ctx->net, set)) {
+		nf_tables_set_notify(ctx, set, NFT_MSG_DELSET, GFP_ATOMIC);
+		nft_set_destroy(set);
+	}
+}
+EXPORT_SYMBOL_GPL(nf_tables_destroy_set);
+
 const struct nft_set_ext_type nft_set_ext_types[] = {
 	[NFT_SET_EXT_KEY]		= {
 		.align	= __alignof__(u32),
diff --git a/net/netfilter/nft_dynset.c b/net/netfilter/nft_dynset.c
index f8688f9bf46ca..800ca627a4577 100644
--- a/net/netfilter/nft_dynset.c
+++ b/net/netfilter/nft_dynset.c
@@ -223,14 +223,31 @@ static int nft_dynset_init(const struct nft_ctx *ctx,
 	return err;
 }
 
+static void nft_dynset_activate(const struct nft_ctx *ctx,
+				const struct nft_expr *expr)
+{
+	struct nft_dynset *priv = nft_expr_priv(expr);
+
+	nf_tables_rebind_set(ctx, priv->set, &priv->binding);
+}
+
+static void nft_dynset_deactivate(const struct nft_ctx *ctx,
+				  const struct nft_expr *expr)
+{
+	struct nft_dynset *priv = nft_expr_priv(expr);
+
+	nf_tables_unbind_set(ctx, priv->set, &priv->binding);
+}
+
 static void nft_dynset_destroy(const struct nft_ctx *ctx,
 			       const struct nft_expr *expr)
 {
 	struct nft_dynset *priv = nft_expr_priv(expr);
 
-	nf_tables_unbind_set(ctx, priv->set, &priv->binding);
 	if (priv->expr != NULL)
 		nft_expr_destroy(ctx, priv->expr);
+
+	nf_tables_destroy_set(ctx, priv->set);
 }
 
 static int nft_dynset_dump(struct sk_buff *skb, const struct nft_expr *expr)
@@ -267,6 +284,8 @@ static const struct nft_expr_ops nft_dynset_ops = {
 	.eval		= nft_dynset_eval,
 	.init		= nft_dynset_init,
 	.destroy	= nft_dynset_destroy,
+	.activate	= nft_dynset_activate,
+	.deactivate	= nft_dynset_deactivate,
 	.dump		= nft_dynset_dump,
 };
 
diff --git a/net/netfilter/nft_lookup.c b/net/netfilter/nft_lookup.c
index 44015a151ad69..c34667f4f48a5 100644
--- a/net/netfilter/nft_lookup.c
+++ b/net/netfilter/nft_lookup.c
@@ -118,12 +118,28 @@ static int nft_lookup_init(const struct nft_ctx *ctx,
 	return 0;
 }
 
+static void nft_lookup_activate(const struct nft_ctx *ctx,
+				const struct nft_expr *expr)
+{
+	struct nft_lookup *priv = nft_expr_priv(expr);
+
+	nf_tables_rebind_set(ctx, priv->set, &priv->binding);
+}
+
+static void nft_lookup_deactivate(const struct nft_ctx *ctx,
+				  const struct nft_expr *expr)
+{
+	struct nft_lookup *priv = nft_expr_priv(expr);
+
+	nf_tables_unbind_set(ctx, priv->set, &priv->binding);
+}
+
 static void nft_lookup_destroy(const struct nft_ctx *ctx,
 			       const struct nft_expr *expr)
 {
 	struct nft_lookup *priv = nft_expr_priv(expr);
 
-	nf_tables_unbind_set(ctx, priv->set, &priv->binding);
+	nf_tables_destroy_set(ctx, priv->set);
 }
 
 static int nft_lookup_dump(struct sk_buff *skb, const struct nft_expr *expr)
@@ -151,6 +167,8 @@ static const struct nft_expr_ops nft_lookup_ops = {
 	.size		= NFT_EXPR_SIZE(sizeof(struct nft_lookup)),
 	.eval		= nft_lookup_eval,
 	.init		= nft_lookup_init,
+	.activate	= nft_lookup_activate,
+	.deactivate	= nft_lookup_deactivate,
 	.destroy	= nft_lookup_destroy,
 	.dump		= nft_lookup_dump,
 };
diff --git a/net/netfilter/nft_objref.c b/net/netfilter/nft_objref.c
index 7bcdc48f3d737..d289fa5e4eb96 100644
--- a/net/netfilter/nft_objref.c
+++ b/net/netfilter/nft_objref.c
@@ -154,12 +154,28 @@ static int nft_objref_map_dump(struct sk_buff *skb, const struct nft_expr *expr)
 	return -1;
 }
 
+static void nft_objref_map_activate(const struct nft_ctx *ctx,
+				    const struct nft_expr *expr)
+{
+	struct nft_objref_map *priv = nft_expr_priv(expr);
+
+	nf_tables_rebind_set(ctx, priv->set, &priv->binding);
+}
+
+static void nft_objref_map_deactivate(const struct nft_ctx *ctx,
+				      const struct nft_expr *expr)
+{
+	struct nft_objref_map *priv = nft_expr_priv(expr);
+
+	nf_tables_unbind_set(ctx, priv->set, &priv->binding);
+}
+
 static void nft_objref_map_destroy(const struct nft_ctx *ctx,
 				   const struct nft_expr *expr)
 {
 	struct nft_objref_map *priv = nft_expr_priv(expr);
 
-	nf_tables_unbind_set(ctx, priv->set, &priv->binding);
+	nf_tables_destroy_set(ctx, priv->set);
 }
 
 static struct nft_expr_type nft_objref_type;
@@ -168,6 +184,8 @@ static const struct nft_expr_ops nft_objref_map_ops = {
 	.size		= NFT_EXPR_SIZE(sizeof(struct nft_objref_map)),
 	.eval		= nft_objref_map_eval,
 	.init		= nft_objref_map_init,
+	.activate	= nft_objref_map_activate,
+	.deactivate	= nft_objref_map_deactivate,
 	.destroy	= nft_objref_map_destroy,
 	.dump		= nft_objref_map_dump,
 };
-- 
2.39.2

[PATCH 4.14 084/116] netfilter: nf_tables: unbind set in rule from commit path

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ backport for 4.14 of f6ac8585897684374a19863fff21186a05805286 ]

Anonymous sets that are bound to rules from the same transaction trigger
a kernel splat from the abort path due to double set list removal and
double free.

This patch updates the logic to search for the transaction that is
responsible for creating the set and disable the set list removal and
release, given the rule is now responsible for this. Lookup is reverse
since the transaction that adds the set is likely to be at the tail of
the list.

Moreover, this patch adds the unbind step to deliver the event from the
commit path.  This should not be done from the worker thread, since we
have no guarantees of in-order delivery to the listener.

This patch removes the assumption that both activate and deactivate
callbacks need to be provided.

Fixes: cd5125d8f518 ("netfilter: nf_tables: split set destruction in deactivate and destroy phase")
Reported-by: Mikhail Morfikov <mmorfikov@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/netfilter/nf_tables.h | 17 +++++--
 net/netfilter/nf_tables_api.c     | 85 +++++++++++++++----------------
 net/netfilter/nft_dynset.c        | 18 +++----
 net/netfilter/nft_immediate.c     |  6 ++-
 net/netfilter/nft_lookup.c        | 18 +++----
 net/netfilter/nft_objref.c        | 18 +++----
 6 files changed, 80 insertions(+), 82 deletions(-)

diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h
index 59da90bb840d9..cc6ba7e593e74 100644
--- a/include/net/netfilter/nf_tables.h
+++ b/include/net/netfilter/nf_tables.h
@@ -462,9 +462,7 @@ struct nft_set_binding {
 int nf_tables_bind_set(const struct nft_ctx *ctx, struct nft_set *set,
 		       struct nft_set_binding *binding);
 void nf_tables_unbind_set(const struct nft_ctx *ctx, struct nft_set *set,
-			  struct nft_set_binding *binding);
-void nf_tables_rebind_set(const struct nft_ctx *ctx, struct nft_set *set,
-			  struct nft_set_binding *binding);
+			  struct nft_set_binding *binding, bool commit);
 void nf_tables_destroy_set(const struct nft_ctx *ctx, struct nft_set *set);
 
 /**
@@ -713,6 +711,13 @@ struct nft_expr_type {
 
 #define NFT_EXPR_STATEFUL		0x1
 
+enum nft_trans_phase {
+	NFT_TRANS_PREPARE,
+	NFT_TRANS_ABORT,
+	NFT_TRANS_COMMIT,
+	NFT_TRANS_RELEASE
+};
+
 /**
  *	struct nft_expr_ops - nf_tables expression operations
  *
@@ -742,7 +747,8 @@ struct nft_expr_ops {
 	void				(*activate)(const struct nft_ctx *ctx,
 						    const struct nft_expr *expr);
 	void				(*deactivate)(const struct nft_ctx *ctx,
-						      const struct nft_expr *expr);
+						      const struct nft_expr *expr,
+						      enum nft_trans_phase phase);
 	void				(*destroy)(const struct nft_ctx *ctx,
 						   const struct nft_expr *expr);
 	int				(*dump)(struct sk_buff *skb,
@@ -1290,12 +1296,15 @@ struct nft_trans_rule {
 struct nft_trans_set {
 	struct nft_set			*set;
 	u32				set_id;
+	bool				bound;
 };
 
 #define nft_trans_set(trans)	\
 	(((struct nft_trans_set *)trans->data)->set)
 #define nft_trans_set_id(trans)	\
 	(((struct nft_trans_set *)trans->data)->set_id)
+#define nft_trans_set_bound(trans)	\
+	(((struct nft_trans_set *)trans->data)->bound)
 
 struct nft_trans_chain {
 	bool				update;
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 39416c568d181..5541ba7cc4a01 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -140,6 +140,23 @@ static void nft_trans_destroy(struct nft_trans *trans)
 	kfree(trans);
 }
 
+static void nft_set_trans_bind(const struct nft_ctx *ctx, struct nft_set *set)
+{
+	struct net *net = ctx->net;
+	struct nft_trans *trans;
+
+	if (!(set->flags & NFT_SET_ANONYMOUS))
+		return;
+
+	list_for_each_entry_reverse(trans, &net->nft.commit_list, list) {
+		if (trans->msg_type == NFT_MSG_NEWSET &&
+		    nft_trans_set(trans) == set) {
+			nft_trans_set_bound(trans) = true;
+			break;
+		}
+	}
+}
+
 static int nf_tables_register_hooks(struct net *net,
 				    const struct nft_table *table,
 				    struct nft_chain *chain,
@@ -221,18 +238,6 @@ static int nft_delchain(struct nft_ctx *ctx)
 	return err;
 }
 
-/* either expr ops provide both activate/deactivate, or neither */
-static bool nft_expr_check_ops(const struct nft_expr_ops *ops)
-{
-	if (!ops)
-		return true;
-
-	if (WARN_ON_ONCE((!ops->activate ^ !ops->deactivate)))
-		return false;
-
-	return true;
-}
-
 static void nft_rule_expr_activate(const struct nft_ctx *ctx,
 				   struct nft_rule *rule)
 {
@@ -248,14 +253,15 @@ static void nft_rule_expr_activate(const struct nft_ctx *ctx,
 }
 
 static void nft_rule_expr_deactivate(const struct nft_ctx *ctx,
-				     struct nft_rule *rule)
+				     struct nft_rule *rule,
+				     enum nft_trans_phase phase)
 {
 	struct nft_expr *expr;
 
 	expr = nft_expr_first(rule);
 	while (expr != nft_expr_last(rule) && expr->ops) {
 		if (expr->ops->deactivate)
-			expr->ops->deactivate(ctx, expr);
+			expr->ops->deactivate(ctx, expr, phase);
 
 		expr = nft_expr_next(expr);
 	}
@@ -306,7 +312,7 @@ static int nft_delrule(struct nft_ctx *ctx, struct nft_rule *rule)
 		nft_trans_destroy(trans);
 		return err;
 	}
-	nft_rule_expr_deactivate(ctx, rule);
+	nft_rule_expr_deactivate(ctx, rule, NFT_TRANS_PREPARE);
 
 	return 0;
 }
@@ -1737,9 +1743,6 @@ static int nf_tables_delchain(struct net *net, struct sock *nlsk,
  */
 int nft_register_expr(struct nft_expr_type *type)
 {
-	if (!nft_expr_check_ops(type->ops))
-		return -EINVAL;
-
 	nfnl_lock(NFNL_SUBSYS_NFTABLES);
 	if (type->family == NFPROTO_UNSPEC)
 		list_add_tail_rcu(&type->list, &nf_tables_expressions);
@@ -1889,10 +1892,6 @@ static int nf_tables_expr_parse(const struct nft_ctx *ctx,
 			err = PTR_ERR(ops);
 			goto err1;
 		}
-		if (!nft_expr_check_ops(ops)) {
-			err = -EINVAL;
-			goto err1;
-		}
 	} else
 		ops = type->ops;
 
@@ -2297,7 +2296,7 @@ static void nf_tables_rule_destroy(const struct nft_ctx *ctx,
 static void nf_tables_rule_release(const struct nft_ctx *ctx,
 				   struct nft_rule *rule)
 {
-	nft_rule_expr_deactivate(ctx, rule);
+	nft_rule_expr_deactivate(ctx, rule, NFT_TRANS_RELEASE);
 	nf_tables_rule_destroy(ctx, rule);
 }
 
@@ -3389,39 +3388,30 @@ int nf_tables_bind_set(const struct nft_ctx *ctx, struct nft_set *set,
 bind:
 	binding->chain = ctx->chain;
 	list_add_tail_rcu(&binding->list, &set->bindings);
+	nft_set_trans_bind(ctx, set);
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(nf_tables_bind_set);
 
-void nf_tables_rebind_set(const struct nft_ctx *ctx, struct nft_set *set,
-			  struct nft_set_binding *binding)
-{
-	if (list_empty(&set->bindings) && set->flags & NFT_SET_ANONYMOUS &&
-	    nft_is_active(ctx->net, set))
-		list_add_tail_rcu(&set->list, &ctx->table->sets);
-
-	list_add_tail_rcu(&binding->list, &set->bindings);
-}
-EXPORT_SYMBOL_GPL(nf_tables_rebind_set);
-
 void nf_tables_unbind_set(const struct nft_ctx *ctx, struct nft_set *set,
-		          struct nft_set_binding *binding)
+			  struct nft_set_binding *binding, bool event)
 {
 	list_del_rcu(&binding->list);
 
-	if (list_empty(&set->bindings) && set->flags & NFT_SET_ANONYMOUS &&
-	    nft_is_active(ctx->net, set))
+	if (list_empty(&set->bindings) && set->flags & NFT_SET_ANONYMOUS) {
 		list_del_rcu(&set->list);
+		if (event)
+			nf_tables_set_notify(ctx, set, NFT_MSG_DELSET,
+					     GFP_KERNEL);
+	}
 }
 EXPORT_SYMBOL_GPL(nf_tables_unbind_set);
 
 void nf_tables_destroy_set(const struct nft_ctx *ctx, struct nft_set *set)
 {
-	if (list_empty(&set->bindings) && set->flags & NFT_SET_ANONYMOUS &&
-	    nft_is_active(ctx->net, set)) {
-		nf_tables_set_notify(ctx, set, NFT_MSG_DELSET, GFP_ATOMIC);
+	if (list_empty(&set->bindings) && set->flags & NFT_SET_ANONYMOUS)
 		nft_set_destroy(set);
-	}
 }
 EXPORT_SYMBOL_GPL(nf_tables_destroy_set);
 
@@ -5197,6 +5187,9 @@ static int nf_tables_commit(struct net *net, struct sk_buff *skb)
 			nf_tables_rule_notify(&trans->ctx,
 					      nft_trans_rule(trans),
 					      NFT_MSG_DELRULE);
+			nft_rule_expr_deactivate(&trans->ctx,
+						 nft_trans_rule(trans),
+						 NFT_TRANS_COMMIT);
 			break;
 		case NFT_MSG_NEWSET:
 			nft_clear(net, nft_trans_set(trans));
@@ -5274,7 +5267,8 @@ static void nf_tables_abort_release(struct nft_trans *trans)
 		nf_tables_rule_destroy(&trans->ctx, nft_trans_rule(trans));
 		break;
 	case NFT_MSG_NEWSET:
-		nft_set_destroy(nft_trans_set(trans));
+		if (!nft_trans_set_bound(trans))
+			nft_set_destroy(nft_trans_set(trans));
 		break;
 	case NFT_MSG_NEWSETELEM:
 		nft_set_elem_destroy(nft_trans_elem_set(trans),
@@ -5334,7 +5328,9 @@ static int nf_tables_abort(struct net *net, struct sk_buff *skb)
 		case NFT_MSG_NEWRULE:
 			trans->ctx.chain->use--;
 			list_del_rcu(&nft_trans_rule(trans)->list);
-			nft_rule_expr_deactivate(&trans->ctx, nft_trans_rule(trans));
+			nft_rule_expr_deactivate(&trans->ctx,
+						 nft_trans_rule(trans),
+						 NFT_TRANS_ABORT);
 			break;
 		case NFT_MSG_DELRULE:
 			trans->ctx.chain->use++;
@@ -5344,7 +5340,8 @@ static int nf_tables_abort(struct net *net, struct sk_buff *skb)
 			break;
 		case NFT_MSG_NEWSET:
 			trans->ctx.table->use--;
-			list_del_rcu(&nft_trans_set(trans)->list);
+			if (!nft_trans_set_bound(trans))
+				list_del_rcu(&nft_trans_set(trans)->list);
 			break;
 		case NFT_MSG_DELSET:
 			trans->ctx.table->use++;
diff --git a/net/netfilter/nft_dynset.c b/net/netfilter/nft_dynset.c
index 800ca627a4577..7e0a203437408 100644
--- a/net/netfilter/nft_dynset.c
+++ b/net/netfilter/nft_dynset.c
@@ -223,20 +223,17 @@ static int nft_dynset_init(const struct nft_ctx *ctx,
 	return err;
 }
 
-static void nft_dynset_activate(const struct nft_ctx *ctx,
-				const struct nft_expr *expr)
-{
-	struct nft_dynset *priv = nft_expr_priv(expr);
-
-	nf_tables_rebind_set(ctx, priv->set, &priv->binding);
-}
-
 static void nft_dynset_deactivate(const struct nft_ctx *ctx,
-				  const struct nft_expr *expr)
+				  const struct nft_expr *expr,
+				  enum nft_trans_phase phase)
 {
 	struct nft_dynset *priv = nft_expr_priv(expr);
 
-	nf_tables_unbind_set(ctx, priv->set, &priv->binding);
+	if (phase == NFT_TRANS_PREPARE)
+		return;
+
+	nf_tables_unbind_set(ctx, priv->set, &priv->binding,
+			     phase == NFT_TRANS_COMMIT);
 }
 
 static void nft_dynset_destroy(const struct nft_ctx *ctx,
@@ -284,7 +281,6 @@ static const struct nft_expr_ops nft_dynset_ops = {
 	.eval		= nft_dynset_eval,
 	.init		= nft_dynset_init,
 	.destroy	= nft_dynset_destroy,
-	.activate	= nft_dynset_activate,
 	.deactivate	= nft_dynset_deactivate,
 	.dump		= nft_dynset_dump,
 };
diff --git a/net/netfilter/nft_immediate.c b/net/netfilter/nft_immediate.c
index aa87ff8beae82..86fd35018b4a6 100644
--- a/net/netfilter/nft_immediate.c
+++ b/net/netfilter/nft_immediate.c
@@ -78,10 +78,14 @@ static void nft_immediate_activate(const struct nft_ctx *ctx,
 }
 
 static void nft_immediate_deactivate(const struct nft_ctx *ctx,
-				     const struct nft_expr *expr)
+				     const struct nft_expr *expr,
+				     enum nft_trans_phase phase)
 {
 	const struct nft_immediate_expr *priv = nft_expr_priv(expr);
 
+	if (phase == NFT_TRANS_COMMIT)
+		return;
+
 	return nft_data_release(&priv->data, nft_dreg_to_type(priv->dreg));
 }
 
diff --git a/net/netfilter/nft_lookup.c b/net/netfilter/nft_lookup.c
index c34667f4f48a5..7dd35245222c5 100644
--- a/net/netfilter/nft_lookup.c
+++ b/net/netfilter/nft_lookup.c
@@ -118,20 +118,17 @@ static int nft_lookup_init(const struct nft_ctx *ctx,
 	return 0;
 }
 
-static void nft_lookup_activate(const struct nft_ctx *ctx,
-				const struct nft_expr *expr)
-{
-	struct nft_lookup *priv = nft_expr_priv(expr);
-
-	nf_tables_rebind_set(ctx, priv->set, &priv->binding);
-}
-
 static void nft_lookup_deactivate(const struct nft_ctx *ctx,
-				  const struct nft_expr *expr)
+				  const struct nft_expr *expr,
+				  enum nft_trans_phase phase)
 {
 	struct nft_lookup *priv = nft_expr_priv(expr);
 
-	nf_tables_unbind_set(ctx, priv->set, &priv->binding);
+	if (phase == NFT_TRANS_PREPARE)
+		return;
+
+	nf_tables_unbind_set(ctx, priv->set, &priv->binding,
+			     phase == NFT_TRANS_COMMIT);
 }
 
 static void nft_lookup_destroy(const struct nft_ctx *ctx,
@@ -167,7 +164,6 @@ static const struct nft_expr_ops nft_lookup_ops = {
 	.size		= NFT_EXPR_SIZE(sizeof(struct nft_lookup)),
 	.eval		= nft_lookup_eval,
 	.init		= nft_lookup_init,
-	.activate	= nft_lookup_activate,
 	.deactivate	= nft_lookup_deactivate,
 	.destroy	= nft_lookup_destroy,
 	.dump		= nft_lookup_dump,
diff --git a/net/netfilter/nft_objref.c b/net/netfilter/nft_objref.c
index d289fa5e4eb96..f72aeff93efad 100644
--- a/net/netfilter/nft_objref.c
+++ b/net/netfilter/nft_objref.c
@@ -154,20 +154,17 @@ static int nft_objref_map_dump(struct sk_buff *skb, const struct nft_expr *expr)
 	return -1;
 }
 
-static void nft_objref_map_activate(const struct nft_ctx *ctx,
-				    const struct nft_expr *expr)
-{
-	struct nft_objref_map *priv = nft_expr_priv(expr);
-
-	nf_tables_rebind_set(ctx, priv->set, &priv->binding);
-}
-
 static void nft_objref_map_deactivate(const struct nft_ctx *ctx,
-				      const struct nft_expr *expr)
+				      const struct nft_expr *expr,
+				      enum nft_trans_phase phase)
 {
 	struct nft_objref_map *priv = nft_expr_priv(expr);
 
-	nf_tables_unbind_set(ctx, priv->set, &priv->binding);
+	if (phase == NFT_TRANS_PREPARE)
+		return;
+
+	nf_tables_unbind_set(ctx, priv->set, &priv->binding,
+			     phase == NFT_TRANS_COMMIT);
 }
 
 static void nft_objref_map_destroy(const struct nft_ctx *ctx,
@@ -184,7 +181,6 @@ static const struct nft_expr_ops nft_objref_map_ops = {
 	.size		= NFT_EXPR_SIZE(sizeof(struct nft_objref_map)),
 	.eval		= nft_objref_map_eval,
 	.init		= nft_objref_map_init,
-	.activate	= nft_objref_map_activate,
 	.deactivate	= nft_objref_map_deactivate,
 	.destroy	= nft_objref_map_destroy,
 	.dump		= nft_objref_map_dump,
-- 
2.39.2

[PATCH 4.14 085/116] netfilter: nft_hash: fix nft_hash_deactivate

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ backport for 4.14 of 7f4dae2d7f03d2aaf3b7d8343d4509c8d9d7ca9b ]

Jindřich Makovička says:
  The logical OR looks fishy to me. Shouldn't be && there instead?

Link: https://bugzilla.netfilter.org/show_bug.cgi?id=1199
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_set_hash.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/nft_set_hash.c b/net/netfilter/nft_set_hash.c
index a684234bd229c..eb7db31dd1733 100644
--- a/net/netfilter/nft_set_hash.c
+++ b/net/netfilter/nft_set_hash.c
@@ -520,7 +520,7 @@ static void *nft_hash_deactivate(const struct net *net,
 	hash = nft_jhash(set, priv, &this->ext);
 	hlist_for_each_entry(he, &priv->table[hash], node) {
 		if (!memcmp(nft_set_ext_key(&this->ext), &elem->key.val,
-			    set->klen) ||
+			    set->klen) &&
 		    nft_set_elem_active(&he->ext, genmask)) {
 			nft_set_elem_change_active(net, set, &he->ext);
 			return he;
-- 
2.39.2

[PATCH 4.14 086/116] netfilter: nf_tables: use-after-free in failing rule with bound set

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ backport for 4.14 of 6a0a8d10a3661a036b55af695542a714c429ab7c ]

If a rule that has already a bound anonymous set fails to be added, the
preparation phase releases the rule and the bound set. However, the
transaction object from the abort path still has a reference to the set
object that is stale, leading to a use-after-free when checking for the
set->bound field. Add a new field to the transaction that specifies if
the set is bound, so the abort path can skip releasing it since the rule
command owns it and it takes care of releasing it. After this update,
the set->bound field is removed.

[   24.649883] Unable to handle kernel paging request at virtual address 0000000000040434
[   24.657858] Mem abort info:
[   24.660686]   ESR = 0x96000004
[   24.663769]   Exception class = DABT (current EL), IL = 32 bits
[   24.669725]   SET = 0, FnV = 0
[   24.672804]   EA = 0, S1PTW = 0
[   24.675975] Data abort info:
[   24.678880]   ISV = 0, ISS = 0x00000004
[   24.682743]   CM = 0, WnR = 0
[   24.685723] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000428952000
[   24.692207] [0000000000040434] pgd=0000000000000000
[   24.697119] Internal error: Oops: 96000004 [#1] SMP
[...]
[   24.889414] Call trace:
[   24.891870]  __nf_tables_abort+0x3f0/0x7a0
[   24.895984]  nf_tables_abort+0x20/0x40
[   24.899750]  nfnetlink_rcv_batch+0x17c/0x588
[   24.904037]  nfnetlink_rcv+0x13c/0x190
[   24.907803]  netlink_unicast+0x18c/0x208
[   24.911742]  netlink_sendmsg+0x1b0/0x350
[   24.915682]  sock_sendmsg+0x4c/0x68
[   24.919185]  ___sys_sendmsg+0x288/0x2c8
[   24.923037]  __sys_sendmsg+0x7c/0xd0
[   24.926628]  __arm64_sys_sendmsg+0x2c/0x38
[   24.930744]  el0_svc_common.constprop.0+0x94/0x158
[   24.935556]  el0_svc_handler+0x34/0x90
[   24.939322]  el0_svc+0x8/0xc
[   24.942216] Code: 37280300 f9404023 91014262 aa1703e0 (f9401863)
[   24.948336] ---[ end trace cebbb9dcbed3b56f ]---

Fixes: f6ac85858976 ("netfilter: nf_tables: unbind set in rule from commit path")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/netfilter/nf_tables.h |  3 +++
 net/netfilter/nf_tables_api.c     | 22 +++++++++++++++++-----
 2 files changed, 20 insertions(+), 5 deletions(-)

diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h
index cc6ba7e593e74..ca82f32d10cd4 100644
--- a/include/net/netfilter/nf_tables.h
+++ b/include/net/netfilter/nf_tables.h
@@ -1335,12 +1335,15 @@ struct nft_trans_table {
 struct nft_trans_elem {
 	struct nft_set			*set;
 	struct nft_set_elem		elem;
+	bool				bound;
 };
 
 #define nft_trans_elem_set(trans)	\
 	(((struct nft_trans_elem *)trans->data)->set)
 #define nft_trans_elem(trans)	\
 	(((struct nft_trans_elem *)trans->data)->elem)
+#define nft_trans_elem_set_bound(trans)	\
+	(((struct nft_trans_elem *)trans->data)->bound)
 
 struct nft_trans_obj {
 	struct nft_object		*obj;
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 5541ba7cc4a01..e9e3e7680a14c 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -149,9 +149,14 @@ static void nft_set_trans_bind(const struct nft_ctx *ctx, struct nft_set *set)
 		return;
 
 	list_for_each_entry_reverse(trans, &net->nft.commit_list, list) {
-		if (trans->msg_type == NFT_MSG_NEWSET &&
-		    nft_trans_set(trans) == set) {
-			nft_trans_set_bound(trans) = true;
+		switch (trans->msg_type) {
+		case NFT_MSG_NEWSET:
+			if (nft_trans_set(trans) == set)
+				nft_trans_set_bound(trans) = true;
+			break;
+		case NFT_MSG_NEWSETELEM:
+			if (nft_trans_elem_set(trans) == set)
+				nft_trans_elem_set_bound(trans) = true;
 			break;
 		}
 	}
@@ -5340,8 +5345,11 @@ static int nf_tables_abort(struct net *net, struct sk_buff *skb)
 			break;
 		case NFT_MSG_NEWSET:
 			trans->ctx.table->use--;
-			if (!nft_trans_set_bound(trans))
-				list_del_rcu(&nft_trans_set(trans)->list);
+			if (nft_trans_set_bound(trans)) {
+				nft_trans_destroy(trans);
+				break;
+			}
+			list_del_rcu(&nft_trans_set(trans)->list);
 			break;
 		case NFT_MSG_DELSET:
 			trans->ctx.table->use++;
@@ -5349,6 +5357,10 @@ static int nf_tables_abort(struct net *net, struct sk_buff *skb)
 			nft_trans_destroy(trans);
 			break;
 		case NFT_MSG_NEWSETELEM:
+			if (nft_trans_elem_set_bound(trans)) {
+				nft_trans_destroy(trans);
+				break;
+			}
 			te = (struct nft_trans_elem *)trans->data;
 
 			te->set->ops->remove(net, te->set, &te->elem);
-- 
2.39.2

[PATCH 4.14 087/116] netfilter: nf_tables: bogus EBUSY when deleting set after flush

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ backport for 4.14 of 273fe3f1006ea5ebc63d6729e43e8e45e32b256a ]

Set deletion after flush coming in the same batch results in EBUSY. Add
set use counter to track the number of references to this set from
rules. We cannot rely on the list of bindings for this since such list
is still populated from the preparation phase.

Reported-by: Václav Zindulka <vaclav.zindulka@tlapnet.cz>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/netfilter/nf_tables.h |  6 ++++++
 net/netfilter/nf_tables_api.c     | 28 +++++++++++++++++++++++++++-
 net/netfilter/nft_dynset.c        | 13 +++++++++----
 net/netfilter/nft_lookup.c        | 13 +++++++++----
 net/netfilter/nft_objref.c        | 13 +++++++++----
 5 files changed, 60 insertions(+), 13 deletions(-)

diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h
index ca82f32d10cd4..fe56b2f825b4e 100644
--- a/include/net/netfilter/nf_tables.h
+++ b/include/net/netfilter/nf_tables.h
@@ -383,6 +383,7 @@ void nft_unregister_set(struct nft_set_type *type);
  * 	@dtype: data type (verdict or numeric type defined by userspace)
  * 	@objtype: object type (see NFT_OBJECT_* definitions)
  * 	@size: maximum set size
+ *	@use: number of rules references to this set
  * 	@nelems: number of elements
  * 	@ndeact: number of deactivated elements queued for removal
  *	@timeout: default timeout value in jiffies
@@ -405,6 +406,7 @@ struct nft_set {
 	u32				dtype;
 	u32				objtype;
 	u32				size;
+	u32				use;
 	atomic_t			nelems;
 	u32				ndeact;
 	u64				timeout;
@@ -459,6 +461,10 @@ struct nft_set_binding {
 	u32				flags;
 };
 
+enum nft_trans_phase;
+void nf_tables_deactivate_set(const struct nft_ctx *ctx, struct nft_set *set,
+			      struct nft_set_binding *binding,
+			      enum nft_trans_phase phase);
 int nf_tables_bind_set(const struct nft_ctx *ctx, struct nft_set *set,
 		       struct nft_set_binding *binding);
 void nf_tables_unbind_set(const struct nft_ctx *ctx, struct nft_set *set,
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index e9e3e7680a14c..2f5b5d563e4d1 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -3309,6 +3309,9 @@ static int nf_tables_newset(struct net *net, struct sock *nlsk,
 
 static void nft_set_destroy(struct nft_set *set)
 {
+	if (WARN_ON(set->use > 0))
+		return;
+
 	set->ops->destroy(set);
 	module_put(set->ops->type->owner);
 	kfree(set->name);
@@ -3339,7 +3342,7 @@ static int nf_tables_delset(struct net *net, struct sock *nlsk,
 	if (IS_ERR(set))
 		return PTR_ERR(set);
 
-	if (!list_empty(&set->bindings) ||
+	if (set->use ||
 	    (nlh->nlmsg_flags & NLM_F_NONREC && atomic_read(&set->nelems) > 0))
 		return -EBUSY;
 
@@ -3367,6 +3370,9 @@ int nf_tables_bind_set(const struct nft_ctx *ctx, struct nft_set *set,
 	struct nft_set_binding *i;
 	struct nft_set_iter iter;
 
+	if (set->use == UINT_MAX)
+		return -EOVERFLOW;
+
 	if (!list_empty(&set->bindings) && set->flags & NFT_SET_ANONYMOUS)
 		return -EBUSY;
 
@@ -3394,6 +3400,7 @@ int nf_tables_bind_set(const struct nft_ctx *ctx, struct nft_set *set,
 	binding->chain = ctx->chain;
 	list_add_tail_rcu(&binding->list, &set->bindings);
 	nft_set_trans_bind(ctx, set);
+	set->use++;
 
 	return 0;
 }
@@ -3413,6 +3420,25 @@ void nf_tables_unbind_set(const struct nft_ctx *ctx, struct nft_set *set,
 }
 EXPORT_SYMBOL_GPL(nf_tables_unbind_set);
 
+void nf_tables_deactivate_set(const struct nft_ctx *ctx, struct nft_set *set,
+			      struct nft_set_binding *binding,
+			      enum nft_trans_phase phase)
+{
+	switch (phase) {
+	case NFT_TRANS_PREPARE:
+		set->use--;
+		return;
+	case NFT_TRANS_ABORT:
+	case NFT_TRANS_RELEASE:
+		set->use--;
+		/* fall through */
+	default:
+		nf_tables_unbind_set(ctx, set, binding,
+				     phase == NFT_TRANS_COMMIT);
+	}
+}
+EXPORT_SYMBOL_GPL(nf_tables_deactivate_set);
+
 void nf_tables_destroy_set(const struct nft_ctx *ctx, struct nft_set *set)
 {
 	if (list_empty(&set->bindings) && set->flags & NFT_SET_ANONYMOUS)
diff --git a/net/netfilter/nft_dynset.c b/net/netfilter/nft_dynset.c
index 7e0a203437408..a20f1668328dc 100644
--- a/net/netfilter/nft_dynset.c
+++ b/net/netfilter/nft_dynset.c
@@ -229,11 +229,15 @@ static void nft_dynset_deactivate(const struct nft_ctx *ctx,
 {
 	struct nft_dynset *priv = nft_expr_priv(expr);
 
-	if (phase == NFT_TRANS_PREPARE)
-		return;
+	nf_tables_deactivate_set(ctx, priv->set, &priv->binding, phase);
+}
+
+static void nft_dynset_activate(const struct nft_ctx *ctx,
+				const struct nft_expr *expr)
+{
+	struct nft_dynset *priv = nft_expr_priv(expr);
 
-	nf_tables_unbind_set(ctx, priv->set, &priv->binding,
-			     phase == NFT_TRANS_COMMIT);
+	priv->set->use++;
 }
 
 static void nft_dynset_destroy(const struct nft_ctx *ctx,
@@ -281,6 +285,7 @@ static const struct nft_expr_ops nft_dynset_ops = {
 	.eval		= nft_dynset_eval,
 	.init		= nft_dynset_init,
 	.destroy	= nft_dynset_destroy,
+	.activate	= nft_dynset_activate,
 	.deactivate	= nft_dynset_deactivate,
 	.dump		= nft_dynset_dump,
 };
diff --git a/net/netfilter/nft_lookup.c b/net/netfilter/nft_lookup.c
index 7dd35245222c5..453f84c571662 100644
--- a/net/netfilter/nft_lookup.c
+++ b/net/netfilter/nft_lookup.c
@@ -124,11 +124,15 @@ static void nft_lookup_deactivate(const struct nft_ctx *ctx,
 {
 	struct nft_lookup *priv = nft_expr_priv(expr);
 
-	if (phase == NFT_TRANS_PREPARE)
-		return;
+	nf_tables_deactivate_set(ctx, priv->set, &priv->binding, phase);
+}
+
+static void nft_lookup_activate(const struct nft_ctx *ctx,
+				const struct nft_expr *expr)
+{
+	struct nft_lookup *priv = nft_expr_priv(expr);
 
-	nf_tables_unbind_set(ctx, priv->set, &priv->binding,
-			     phase == NFT_TRANS_COMMIT);
+	priv->set->use++;
 }
 
 static void nft_lookup_destroy(const struct nft_ctx *ctx,
@@ -164,6 +168,7 @@ static const struct nft_expr_ops nft_lookup_ops = {
 	.size		= NFT_EXPR_SIZE(sizeof(struct nft_lookup)),
 	.eval		= nft_lookup_eval,
 	.init		= nft_lookup_init,
+	.activate	= nft_lookup_activate,
 	.deactivate	= nft_lookup_deactivate,
 	.destroy	= nft_lookup_destroy,
 	.dump		= nft_lookup_dump,
diff --git a/net/netfilter/nft_objref.c b/net/netfilter/nft_objref.c
index f72aeff93efad..7e628f4f02b93 100644
--- a/net/netfilter/nft_objref.c
+++ b/net/netfilter/nft_objref.c
@@ -160,11 +160,15 @@ static void nft_objref_map_deactivate(const struct nft_ctx *ctx,
 {
 	struct nft_objref_map *priv = nft_expr_priv(expr);
 
-	if (phase == NFT_TRANS_PREPARE)
-		return;
+	nf_tables_deactivate_set(ctx, priv->set, &priv->binding, phase);
+}
+
+static void nft_objref_map_activate(const struct nft_ctx *ctx,
+				    const struct nft_expr *expr)
+{
+	struct nft_objref_map *priv = nft_expr_priv(expr);
 
-	nf_tables_unbind_set(ctx, priv->set, &priv->binding,
-			     phase == NFT_TRANS_COMMIT);
+	priv->set->use++;
 }
 
 static void nft_objref_map_destroy(const struct nft_ctx *ctx,
@@ -181,6 +185,7 @@ static const struct nft_expr_ops nft_objref_map_ops = {
 	.size		= NFT_EXPR_SIZE(sizeof(struct nft_objref_map)),
 	.eval		= nft_objref_map_eval,
 	.init		= nft_objref_map_init,
+	.activate	= nft_objref_map_activate,
 	.deactivate	= nft_objref_map_deactivate,
 	.destroy	= nft_objref_map_destroy,
 	.dump		= nft_objref_map_dump,
-- 
2.39.2

[PATCH 4.14 088/116] netfilter: nf_tables: deactivate anonymous set from preparation phase

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ backport for 4.14 of c1592a89942e9678f7d9c8030efa777c0d57edab ]

Toggle deleted anonymous sets as inactive in the next generation, so
users cannot perform any update on it. Clear the generation bitmask
in case the transaction is aborted.

The following KASAN splat shows a set element deletion for a bound
anonymous set that has been already removed in the same transaction.

[   64.921510] ==================================================================
[   64.923123] BUG: KASAN: wild-memory-access in nf_tables_commit+0xa24/0x1490 [nf_tables]
[   64.924745] Write of size 8 at addr dead000000000122 by task test/890
[   64.927903] CPU: 3 PID: 890 Comm: test Not tainted 6.3.0+ #253
[   64.931120] Call Trace:
[   64.932699]  <TASK>
[   64.934292]  dump_stack_lvl+0x33/0x50
[   64.935908]  ? nf_tables_commit+0xa24/0x1490 [nf_tables]
[   64.937551]  kasan_report+0xda/0x120
[   64.939186]  ? nf_tables_commit+0xa24/0x1490 [nf_tables]
[   64.940814]  nf_tables_commit+0xa24/0x1490 [nf_tables]
[   64.942452]  ? __kasan_slab_alloc+0x2d/0x60
[   64.944070]  ? nf_tables_setelem_notify+0x190/0x190 [nf_tables]
[   64.945710]  ? kasan_set_track+0x21/0x30
[   64.947323]  nfnetlink_rcv_batch+0x709/0xd90 [nfnetlink]
[   64.948898]  ? nfnetlink_rcv_msg+0x480/0x480 [nfnetlink]

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/netfilter/nf_tables.h |  1 +
 net/netfilter/nf_tables_api.c     | 12 ++++++++++++
 net/netfilter/nft_dynset.c        |  2 +-
 net/netfilter/nft_lookup.c        |  2 +-
 net/netfilter/nft_objref.c        |  2 +-
 5 files changed, 16 insertions(+), 3 deletions(-)

diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h
index fe56b2f825b4e..2db486e9724c6 100644
--- a/include/net/netfilter/nf_tables.h
+++ b/include/net/netfilter/nf_tables.h
@@ -462,6 +462,7 @@ struct nft_set_binding {
 };
 
 enum nft_trans_phase;
+void nf_tables_activate_set(const struct nft_ctx *ctx, struct nft_set *set);
 void nf_tables_deactivate_set(const struct nft_ctx *ctx, struct nft_set *set,
 			      struct nft_set_binding *binding,
 			      enum nft_trans_phase phase);
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 2f5b5d563e4d1..c683a45b8ae53 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -3420,12 +3420,24 @@ void nf_tables_unbind_set(const struct nft_ctx *ctx, struct nft_set *set,
 }
 EXPORT_SYMBOL_GPL(nf_tables_unbind_set);
 
+void nf_tables_activate_set(const struct nft_ctx *ctx, struct nft_set *set)
+{
+	if (set->flags & NFT_SET_ANONYMOUS)
+		nft_clear(ctx->net, set);
+
+	set->use++;
+}
+EXPORT_SYMBOL_GPL(nf_tables_activate_set);
+
 void nf_tables_deactivate_set(const struct nft_ctx *ctx, struct nft_set *set,
 			      struct nft_set_binding *binding,
 			      enum nft_trans_phase phase)
 {
 	switch (phase) {
 	case NFT_TRANS_PREPARE:
+		if (set->flags & NFT_SET_ANONYMOUS)
+			nft_deactivate_next(ctx->net, set);
+
 		set->use--;
 		return;
 	case NFT_TRANS_ABORT:
diff --git a/net/netfilter/nft_dynset.c b/net/netfilter/nft_dynset.c
index a20f1668328dc..74e8fdaa34321 100644
--- a/net/netfilter/nft_dynset.c
+++ b/net/netfilter/nft_dynset.c
@@ -237,7 +237,7 @@ static void nft_dynset_activate(const struct nft_ctx *ctx,
 {
 	struct nft_dynset *priv = nft_expr_priv(expr);
 
-	priv->set->use++;
+	nf_tables_activate_set(ctx, priv->set);
 }
 
 static void nft_dynset_destroy(const struct nft_ctx *ctx,
diff --git a/net/netfilter/nft_lookup.c b/net/netfilter/nft_lookup.c
index 453f84c571662..4fcbe51e88c76 100644
--- a/net/netfilter/nft_lookup.c
+++ b/net/netfilter/nft_lookup.c
@@ -132,7 +132,7 @@ static void nft_lookup_activate(const struct nft_ctx *ctx,
 {
 	struct nft_lookup *priv = nft_expr_priv(expr);
 
-	priv->set->use++;
+	nf_tables_activate_set(ctx, priv->set);
 }
 
 static void nft_lookup_destroy(const struct nft_ctx *ctx,
diff --git a/net/netfilter/nft_objref.c b/net/netfilter/nft_objref.c
index 7e628f4f02b93..49a067a67e723 100644
--- a/net/netfilter/nft_objref.c
+++ b/net/netfilter/nft_objref.c
@@ -168,7 +168,7 @@ static void nft_objref_map_activate(const struct nft_ctx *ctx,
 {
 	struct nft_objref_map *priv = nft_expr_priv(expr);
 
-	priv->set->use++;
+	nf_tables_activate_set(ctx, priv->set);
 }
 
 static void nft_objref_map_destroy(const struct nft_ctx *ctx,
-- 
2.39.2

[PATCH 4.14 089/116] sit: update dev->needed_headroom in ipip6_tunnel_bind_dev()

[Greg Kroah-Hartman]

From: Cong Wang <cong.wang@bytedance.com>

[ Upstream commit c88f8d5cd95fd039cff95d682b8e71100c001df0 ]

When a tunnel device is bound with the underlying device, its
dev->needed_headroom needs to be updated properly. IPv4 tunnels
already do the same in ip_tunnel_bind_dev(). Otherwise we may
not have enough header room for skb, especially after commit
b17f709a2401 ("gue: TX support for using remote checksum offload option").

Fixes: 32b8a8e59c9c ("sit: add IPv4 over IPv4 support")
Reported-by: Palash Oswal <oswalpalash@gmail.com>
Link: https://lore.kernel.org/netdev/CAGyP=7fDcSPKu6nttbGwt7RXzE3uyYxLjCSE97J64pRxJP8jPA@mail.gmail.com/
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/sit.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index e5baf5e4782b0..f24a6cd0d15a3 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -1039,12 +1039,13 @@ static netdev_tx_t sit_tunnel_xmit(struct sk_buff *skb,
 
 static void ipip6_tunnel_bind_dev(struct net_device *dev)
 {
+	struct ip_tunnel *tunnel = netdev_priv(dev);
+	int t_hlen = tunnel->hlen + sizeof(struct iphdr);
 	struct net_device *tdev = NULL;
-	struct ip_tunnel *tunnel;
+	int hlen = LL_MAX_HEADER;
 	const struct iphdr *iph;
 	struct flowi4 fl4;
 
-	tunnel = netdev_priv(dev);
 	iph = &tunnel->parms.iph;
 
 	if (iph->daddr) {
@@ -1067,14 +1068,15 @@ static void ipip6_tunnel_bind_dev(struct net_device *dev)
 		tdev = __dev_get_by_index(tunnel->net, tunnel->parms.link);
 
 	if (tdev && !netif_is_l3_master(tdev)) {
-		int t_hlen = tunnel->hlen + sizeof(struct iphdr);
 		int mtu;
 
 		mtu = tdev->mtu - t_hlen;
 		if (mtu < IPV6_MIN_MTU)
 			mtu = IPV6_MIN_MTU;
 		WRITE_ONCE(dev->mtu, mtu);
+		hlen = tdev->hard_header_len + tdev->needed_headroom;
 	}
+	dev->needed_headroom = t_hlen + hlen;
 }
 
 static void ipip6_tunnel_update(struct ip_tunnel *t, struct ip_tunnel_parm *p,
-- 
2.39.2

[PATCH 4.14 090/116] writeback: fix call of incorrect macro

[Greg Kroah-Hartman]

From: Maxim Korotkov <korotkov.maxim.s@gmail.com>

[ Upstream commit 3e46c89c74f2c38e5337d2cf44b0b551adff1cb4 ]

 the variable 'history' is of type u16, it may be an error
 that the hweight32 macro was used for it
 I guess macro hweight16 should be used

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 2a81490811d0 ("writeback: implement foreign cgroup inode detection")
Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230119104443.3002-1-korotkov.maxim.s@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/fs-writeback.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index be6096f195c5a..05e2fbe892199 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -702,7 +702,7 @@ void wbc_detach_inode(struct writeback_control *wbc)
 		 * is okay.  The main goal is avoiding keeping an inode on
 		 * the wrong wb for an extended period of time.
 		 */
-		if (hweight32(history) > WB_FRN_HIST_THR_SLOTS)
+		if (hweight16(history) > WB_FRN_HIST_THR_SLOTS)
 			inode_switch_wbs(inode, max_id);
 	}
 
-- 
2.39.2

[PATCH 4.14 091/116] net/sched: act_mirred: Add carrier check

[Greg Kroah-Hartman]

From: Victor Nogueira <victor@mojatatu.com>

[ Upstream commit 526f28bd0fbdc699cda31426928802650c1528e5 ]

There are cases where the device is adminstratively UP, but operationally
down. For example, we have a physical device (Nvidia ConnectX-6 Dx, 25Gbps)
who's cable was pulled out, here is its ip link output:

5: ens2f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
    link/ether b8:ce:f6:4b:68:35 brd ff:ff:ff:ff:ff:ff
    altname enp179s0f1np1

As you can see, it's administratively UP but operationally down.
In this case, sending a packet to this port caused a nasty kernel hang (so
nasty that we were unable to capture it). Aborting a transmit based on
operational status (in addition to administrative status) fixes the issue.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
v1->v2: Add fixes tag
v2->v3: Remove blank line between tags + add change log, suggested by Leon
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/act_mirred.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sched/act_mirred.c b/net/sched/act_mirred.c
index dcfaa4f9c7c5b..0a032c4d26b86 100644
--- a/net/sched/act_mirred.c
+++ b/net/sched/act_mirred.c
@@ -181,7 +181,7 @@ static int tcf_mirred(struct sk_buff *skb, const struct tc_action *a,
 		goto out;
 	}
 
-	if (unlikely(!(dev->flags & IFF_UP))) {
+	if (unlikely(!(dev->flags & IFF_UP)) || !netif_carrier_ok(dev)) {
 		net_notice_ratelimited("tc mirred to Houston: device %s is down\n",
 				       dev->name);
 		goto out;
-- 
2.39.2

[PATCH 4.14 092/116] af_packet: Dont send zero-byte data in packet_sendmsg_spkt().

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 6a341729fb31b4c5df9f74f24b4b1c98410c9b87 ]

syzkaller reported a warning below [0].

We can reproduce it by sending 0-byte data from the (AF_PACKET,
SOCK_PACKET) socket via some devices whose dev->hard_header_len
is 0.

    struct sockaddr_pkt addr = {
        .spkt_family = AF_PACKET,
        .spkt_device = "tun0",
    };
    int fd;

    fd = socket(AF_PACKET, SOCK_PACKET, 0);
    sendto(fd, NULL, 0, 0, (struct sockaddr *)&addr, sizeof(addr));

We have a similar fix for the (AF_PACKET, SOCK_RAW) socket as
commit dc633700f00f ("net/af_packet: check len when min_header_len
equals to 0").

Let's add the same test for the SOCK_PACKET socket.

[0]:
skb_assert_len
WARNING: CPU: 1 PID: 19945 at include/linux/skbuff.h:2552 skb_assert_len include/linux/skbuff.h:2552 [inline]
WARNING: CPU: 1 PID: 19945 at include/linux/skbuff.h:2552 __dev_queue_xmit+0x1f26/0x31d0 net/core/dev.c:4159
Modules linked in:
CPU: 1 PID: 19945 Comm: syz-executor.0 Not tainted 6.3.0-rc7-02330-gca6270c12e20 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:skb_assert_len include/linux/skbuff.h:2552 [inline]
RIP: 0010:__dev_queue_xmit+0x1f26/0x31d0 net/core/dev.c:4159
Code: 89 de e8 1d a2 85 fd 84 db 75 21 e8 64 a9 85 fd 48 c7 c6 80 2a 1f 86 48 c7 c7 c0 06 1f 86 c6 05 23 cf 27 04 01 e8 fa ee 56 fd <0f> 0b e8 43 a9 85 fd 0f b6 1d 0f cf 27 04 31 ff 89 de e8 e3 a1 85
RSP: 0018:ffff8880217af6e0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffc90001133000
RDX: 0000000000040000 RSI: ffffffff81186922 RDI: 0000000000000001
RBP: ffff8880217af8b0 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffff888030045640
R13: ffff8880300456b0 R14: ffff888030045650 R15: ffff888030045718
FS:  00007fc5864da640(0000) GS:ffff88806cd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020005740 CR3: 000000003f856003 CR4: 0000000000770ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 <TASK>
 dev_queue_xmit include/linux/netdevice.h:3085 [inline]
 packet_sendmsg_spkt+0xc4b/0x1230 net/packet/af_packet.c:2066
 sock_sendmsg_nosec net/socket.c:724 [inline]
 sock_sendmsg+0x1b4/0x200 net/socket.c:747
 ____sys_sendmsg+0x331/0x970 net/socket.c:2503
 ___sys_sendmsg+0x11d/0x1c0 net/socket.c:2557
 __sys_sendmmsg+0x18c/0x430 net/socket.c:2643
 __do_sys_sendmmsg net/socket.c:2672 [inline]
 __se_sys_sendmmsg net/socket.c:2669 [inline]
 __x64_sys_sendmmsg+0x9c/0x100 net/socket.c:2669
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7fc58791de5d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48
RSP: 002b:00007fc5864d9cc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 00000000004bbf80 RCX: 00007fc58791de5d
RDX: 0000000000000001 RSI: 0000000020005740 RDI: 0000000000000004
RBP: 00000000004bbf80 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000000b R14: 00007fc58797e530 R15: 0000000000000000
 </TASK>
---[ end trace 0000000000000000 ]---
skb len=0 headroom=16 headlen=0 tailroom=304
mac=(16,0) net=(16,-1) trans=-1
shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0))
csum(0x0 ip_summed=0 complete_sw=0 valid=0 level=0)
hash(0x0 sw=0 l4=0) proto=0x0000 pkttype=0 iif=0
dev name=sit0 feat=0x00000006401d7869
sk family=17 type=10 proto=0

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/packet/af_packet.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 8b44ad304a656..2089da69da103 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -1995,7 +1995,7 @@ static int packet_sendmsg_spkt(struct socket *sock, struct msghdr *msg,
 		goto retry;
 	}
 
-	if (!dev_validate_header(dev, skb->data, len)) {
+	if (!dev_validate_header(dev, skb->data, len) || !skb->len) {
 		err = -EINVAL;
 		goto out_unlock;
 	}
-- 
2.39.2

[PATCH 4.14 093/116] ALSA: caiaq: input: Add error handling for unsupported input methods in `snd_usb_caiaq_input_init`

[Greg Kroah-Hartman]

From: Ruliang Lin <u202112092@hust.edu.cn>

[ Upstream commit 0d727e1856ef22dd9337199430258cb64cbbc658 ]

Smatch complains that:
snd_usb_caiaq_input_init() warn: missing error code 'ret'

This patch adds a new case to handle the situation where the
device does not support any input methods in the
`snd_usb_caiaq_input_init` function. It returns an `-EINVAL` error code
to indicate that no input methods are supported on the device.

Fixes: 523f1dce3743 ("[ALSA] Add Native Instrument usb audio device support")
Signed-off-by: Ruliang Lin <u202112092@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Acked-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20230504065054.3309-1-u202112092@hust.edu.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/caiaq/input.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/usb/caiaq/input.c b/sound/usb/caiaq/input.c
index 4b3fb91deecdf..0898d2dd14e40 100644
--- a/sound/usb/caiaq/input.c
+++ b/sound/usb/caiaq/input.c
@@ -808,6 +808,7 @@ int snd_usb_caiaq_input_init(struct snd_usb_caiaqdev *cdev)
 
 	default:
 		/* no input methods supported on this device */
+		ret = -EINVAL;
 		goto exit_free_idev;
 	}
 
-- 
2.39.2

[PATCH 4.14 094/116] perf vendor events power9: Remove UTF-8 characters from JSON files

[Greg Kroah-Hartman]

From: Kajol Jain <kjain@linux.ibm.com>

[ Upstream commit 5d9df8731c0941f3add30f96745a62586a0c9d52 ]

Commit 3c22ba5243040c13 ("perf vendor events powerpc: Update POWER9
events") added and updated power9 PMU JSON events. However some of the
JSON events which are part of other.json and pipeline.json files,
contains UTF-8 characters in their brief description.  Having UTF-8
character could breaks the perf build on some distros.

Fix this issue by removing the UTF-8 characters from other.json and
pipeline.json files.

Result without the fix:

  [command]# file -i pmu-events/arch/powerpc/power9/*
  pmu-events/arch/powerpc/power9/cache.json:          application/json; charset=us-ascii
  pmu-events/arch/powerpc/power9/floating-point.json: application/json; charset=us-ascii
  pmu-events/arch/powerpc/power9/frontend.json:       application/json; charset=us-ascii
  pmu-events/arch/powerpc/power9/marked.json:         application/json; charset=us-ascii
  pmu-events/arch/powerpc/power9/memory.json:         application/json; charset=us-ascii
  pmu-events/arch/powerpc/power9/metrics.json:        application/json; charset=us-ascii
  pmu-events/arch/powerpc/power9/nest_metrics.json:   application/json; charset=us-ascii
  pmu-events/arch/powerpc/power9/other.json:          application/json; charset=utf-8
  pmu-events/arch/powerpc/power9/pipeline.json:       application/json; charset=utf-8
  pmu-events/arch/powerpc/power9/pmc.json:            application/json; charset=us-ascii
  pmu-events/arch/powerpc/power9/translation.json:    application/json; charset=us-ascii
  [command]#

Result with the fix:

  [command]# file -i pmu-events/arch/powerpc/power9/*
  pmu-events/arch/powerpc/power9/cache.json:          application/json; charset=us-ascii
  pmu-events/arch/powerpc/power9/floating-point.json: application/json; charset=us-ascii
  pmu-events/arch/powerpc/power9/frontend.json:       application/json; charset=us-ascii
  pmu-events/arch/powerpc/power9/marked.json:         application/json; charset=us-ascii
  pmu-events/arch/powerpc/power9/memory.json:         application/json; charset=us-ascii
  pmu-events/arch/powerpc/power9/metrics.json:        application/json; charset=us-ascii
  pmu-events/arch/powerpc/power9/nest_metrics.json:   application/json; charset=us-ascii
  pmu-events/arch/powerpc/power9/other.json:          application/json; charset=us-ascii
  pmu-events/arch/powerpc/power9/pipeline.json:       application/json; charset=us-ascii
  pmu-events/arch/powerpc/power9/pmc.json:            application/json; charset=us-ascii
  pmu-events/arch/powerpc/power9/translation.json:    application/json; charset=us-ascii
  [command]#

Fixes: 3c22ba5243040c13 ("perf vendor events powerpc: Update POWER9 events")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/lkml/ZBxP77deq7ikTxwG@kernel.org/
Link: https://lore.kernel.org/r/20230328112908.113158-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/pmu-events/arch/powerpc/power9/other.json    | 4 ++--
 tools/perf/pmu-events/arch/powerpc/power9/pipeline.json | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/tools/perf/pmu-events/arch/powerpc/power9/other.json b/tools/perf/pmu-events/arch/powerpc/power9/other.json
index 54cc3be00fc2d..0048c27d75f35 100644
--- a/tools/perf/pmu-events/arch/powerpc/power9/other.json
+++ b/tools/perf/pmu-events/arch/powerpc/power9/other.json
@@ -1452,7 +1452,7 @@
   {,
     "EventCode": "0x45054",
     "EventName": "PM_FMA_CMPL",
-    "BriefDescription": "two flops operation completed (fmadd, fnmadd, fmsub, fnmsub) Scalar instructions only. "
+    "BriefDescription": "two flops operation completed (fmadd, fnmadd, fmsub, fnmsub) Scalar instructions only."
   },
   {,
     "EventCode": "0x5090",
@@ -2067,7 +2067,7 @@
   {,
     "EventCode": "0xC0BC",
     "EventName": "PM_LSU_FLUSH_OTHER",
-    "BriefDescription": "Other LSU flushes including: Sync (sync ack from L2 caused search of LRQ for oldest snooped load, This will either signal a Precise Flush of the oldest snooped loa or a Flush Next PPC); Data Valid Flush Next (several cases of this, one example is store and reload are lined up such that a store-hit-reload scenario exists and the CDF has already launched and has gotten bad/stale data); Bad Data Valid Flush Next (might be a few cases of this, one example is a larxa (D$ hit) return data and dval but can't allocate to LMQ (LMQ full or other reason). Already gave dval but can't watch it for snoop_hit_larx. Need to take the “bad dval” back and flush all younger ops)"
+    "BriefDescription": "Other LSU flushes including: Sync (sync ack from L2 caused search of LRQ for oldest snooped load, This will either signal a Precise Flush of the oldest snooped loa or a Flush Next PPC); Data Valid Flush Next (several cases of this, one example is store and reload are lined up such that a store-hit-reload scenario exists and the CDF has already launched and has gotten bad/stale data); Bad Data Valid Flush Next (might be a few cases of this, one example is a larxa (D$ hit) return data and dval but can't allocate to LMQ (LMQ full or other reason). Already gave dval but can't watch it for snoop_hit_larx. Need to take the 'bad dval' back and flush all younger ops)"
   },
   {,
     "EventCode": "0x5094",
diff --git a/tools/perf/pmu-events/arch/powerpc/power9/pipeline.json b/tools/perf/pmu-events/arch/powerpc/power9/pipeline.json
index bc2db636dabf1..876292f69e1f6 100644
--- a/tools/perf/pmu-events/arch/powerpc/power9/pipeline.json
+++ b/tools/perf/pmu-events/arch/powerpc/power9/pipeline.json
@@ -462,7 +462,7 @@
   {,
     "EventCode": "0x4D052",
     "EventName": "PM_2FLOP_CMPL",
-    "BriefDescription": "DP vector version of fmul, fsub, fcmp, fsel, fabs, fnabs, fres ,fsqrte, fneg "
+    "BriefDescription": "DP vector version of fmul, fsub, fcmp, fsel, fabs, fnabs, fres ,fsqrte, fneg"
   },
   {,
     "EventCode": "0x1F142",
-- 
2.39.2

[PATCH 4.14 095/116] perf map: Delete two variable initialisations before null pointer checks in sort__sym_from_cmp()

[Greg Kroah-Hartman]

From: Markus Elfring <Markus.Elfring@web.de>

[ Upstream commit c160118a90d4acf335993d8d59b02ae2147a524e ]

Addresses of two data structure members were determined before
corresponding null pointer checks in the implementation of the function
“sort__sym_from_cmp”.

Thus avoid the risk for undefined behaviour by removing extra
initialisations for the local variables “from_l” and “from_r” (also
because they were already reassigned with the same value behind this
pointer check).

This issue was detected by using the Coccinelle software.

Fixes: 1b9e97a2a95e4941 ("perf tools: Fix report -F symbol_from for data without branch info")
Signed-off-by: <elfring@users.sourceforge.net>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/cocci/54a21fea-64e3-de67-82ef-d61b90ffad05@web.de/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/sort.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/tools/perf/util/sort.c b/tools/perf/util/sort.c
index cd870129131e1..4fe2f3f92ab11 100644
--- a/tools/perf/util/sort.c
+++ b/tools/perf/util/sort.c
@@ -753,8 +753,7 @@ static int hist_entry__dso_to_filter(struct hist_entry *he, int type,
 static int64_t
 sort__sym_from_cmp(struct hist_entry *left, struct hist_entry *right)
 {
-	struct addr_map_symbol *from_l = &left->branch_info->from;
-	struct addr_map_symbol *from_r = &right->branch_info->from;
+	struct addr_map_symbol *from_l, *from_r;
 
 	if (!left->branch_info || !right->branch_info)
 		return cmp_null(left->branch_info, right->branch_info);
-- 
2.39.2

[PATCH 4.14 096/116] perf symbols: Fix return incorrect build_id size in elf_read_build_id()

[Greg Kroah-Hartman]

From: Yang Jihong <yangjihong1@huawei.com>

[ Upstream commit 1511e4696acb715a4fe48be89e1e691daec91c0e ]

In elf_read_build_id(), if gnu build_id is found, should return the size of
the actually copied data. If descsz is greater thanBuild_ID_SIZE,
write_buildid data access may occur.

Fixes: be96ea8ffa788dcc ("perf symbols: Fix issue with binaries using 16-bytes buildids (v2)")
Reported-by: Will Ochowicz <Will.Ochowicz@genusplc.com>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Tested-by: Will Ochowicz <Will.Ochowicz@genusplc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/lkml/CWLP265MB49702F7BA3D6D8F13E4B1A719C649@CWLP265MB4970.GBRP265.PROD.OUTLOOK.COM/T/
Link: https://lore.kernel.org/r/20230427012841.231729-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/symbol-elf.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/tools/perf/util/symbol-elf.c
+++ b/tools/perf/util/symbol-elf.c
@@ -504,7 +504,7 @@ static int elf_read_build_id(Elf *elf, v
 				size_t sz = min(size, descsz);
 				memcpy(bf, ptr, sz);
 				memset(bf + sz, 0, size - sz);
-				err = descsz;
+				err = sz;
 				break;
 			}
 		}

[PATCH 4.14 097/116] btrfs: fix btrfs_prev_leaf() to not return the same key twice

[Greg Kroah-Hartman]

From: Filipe Manana <fdmanana@suse.com>

commit 6f932d4ef007d6a4ae03badcb749fbb8f49196f6 upstream.

A call to btrfs_prev_leaf() may end up returning a path that points to the
same item (key) again. This happens if while btrfs_prev_leaf(), after we
release the path, a concurrent insertion happens, which moves items off
from a sibling into the front of the previous leaf, and an item with the
computed previous key does not exists.

For example, suppose we have the two following leaves:

  Leaf A

  -------------------------------------------------------------
  | ...   key (300 96 10)   key (300 96 15)   key (300 96 16) |
  -------------------------------------------------------------
              slot 20             slot 21             slot 22

  Leaf B

  -------------------------------------------------------------
  | key (300 96 20)   key (300 96 21)   key (300 96 22)   ... |
  -------------------------------------------------------------
      slot 0             slot 1             slot 2

If we call btrfs_prev_leaf(), from btrfs_previous_item() for example, with
a path pointing to leaf B and slot 0 and the following happens:

1) At btrfs_prev_leaf() we compute the previous key to search as:
   (300 96 19), which is a key that does not exists in the tree;

2) Then we call btrfs_release_path() at btrfs_prev_leaf();

3) Some other task inserts a key at leaf A, that sorts before the key at
   slot 20, for example it has an objectid of 299. In order to make room
   for the new key, the key at slot 22 is moved to the front of leaf B.
   This happens at push_leaf_right(), called from split_leaf().

   After this leaf B now looks like:

  --------------------------------------------------------------------------------
  | key (300 96 16)    key (300 96 20)   key (300 96 21)   key (300 96 22)   ... |
  --------------------------------------------------------------------------------
       slot 0              slot 1             slot 2             slot 3

4) At btrfs_prev_leaf() we call btrfs_search_slot() for the computed
   previous key: (300 96 19). Since the key does not exists,
   btrfs_search_slot() returns 1 and with a path pointing to leaf B
   and slot 1, the item with key (300 96 20);

5) This makes btrfs_prev_leaf() return a path that points to slot 1 of
   leaf B, the same key as before it was called, since the key at slot 0
   of leaf B (300 96 16) is less than the computed previous key, which is
   (300 96 19);

6) As a consequence btrfs_previous_item() returns a path that points again
   to the item with key (300 96 20).

For some users of btrfs_prev_leaf() or btrfs_previous_item() this may not
be functional a problem, despite not making sense to return a new path
pointing again to the same item/key. However for a caller such as
tree-log.c:log_dir_items(), this has a bad consequence, as it can result
in not logging some dir index deletions in case the directory is being
logged without holding the inode's VFS lock (logging triggered while
logging a child inode for example) - for the example scenario above, in
case the dir index keys 17, 18 and 19 were deleted in the current
transaction.

CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/ctree.c |   32 +++++++++++++++++++++++++++++++-
 1 file changed, 31 insertions(+), 1 deletion(-)

--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -5106,10 +5106,12 @@ int btrfs_del_items(struct btrfs_trans_h
 int btrfs_prev_leaf(struct btrfs_root *root, struct btrfs_path *path)
 {
 	struct btrfs_key key;
+	struct btrfs_key orig_key;
 	struct btrfs_disk_key found_key;
 	int ret;
 
 	btrfs_item_key_to_cpu(path->nodes[0], &key, 0);
+	orig_key = key;
 
 	if (key.offset > 0) {
 		key.offset--;
@@ -5126,8 +5128,36 @@ int btrfs_prev_leaf(struct btrfs_root *r
 
 	btrfs_release_path(path);
 	ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
-	if (ret < 0)
+	if (ret <= 0)
 		return ret;
+
+	/*
+	 * Previous key not found. Even if we were at slot 0 of the leaf we had
+	 * before releasing the path and calling btrfs_search_slot(), we now may
+	 * be in a slot pointing to the same original key - this can happen if
+	 * after we released the path, one of more items were moved from a
+	 * sibling leaf into the front of the leaf we had due to an insertion
+	 * (see push_leaf_right()).
+	 * If we hit this case and our slot is > 0 and just decrement the slot
+	 * so that the caller does not process the same key again, which may or
+	 * may not break the caller, depending on its logic.
+	 */
+	if (path->slots[0] < btrfs_header_nritems(path->nodes[0])) {
+		btrfs_item_key(path->nodes[0], &found_key, path->slots[0]);
+		ret = comp_keys(&found_key, &orig_key);
+		if (ret == 0) {
+			if (path->slots[0] > 0) {
+				path->slots[0]--;
+				return 0;
+			}
+			/*
+			 * At slot 0, same key as before, it means orig_key is
+			 * the lowest, leftmost, key in the tree. We're done.
+			 */
+			return 1;
+		}
+	}
+
 	btrfs_item_key(path->nodes[0], &found_key, 0);
 	ret = comp_keys(&found_key, &key);
 	/*

[PATCH 4.14 098/116] btrfs: print-tree: parent bytenr must be aligned to sector size

[Greg Kroah-Hartman]

From: Anastasia Belova <abelova@astralinux.ru>

commit c87f318e6f47696b4040b58f460d5c17ea0280e6 upstream.

Check nodesize to sectorsize in alignment check in print_extent_item.
The comment states that and this is correct, similar check is done
elsewhere in the functions.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: ea57788eb76d ("btrfs: require only sector size alignment for parent eb bytenr")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/print-tree.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/fs/btrfs/print-tree.c
+++ b/fs/btrfs/print-tree.c
@@ -130,10 +130,10 @@ static void print_extent_item(struct ext
 			pr_cont("shared data backref parent %llu count %u\n",
 			       offset, btrfs_shared_data_ref_count(eb, sref));
 			/*
-			 * offset is supposed to be a tree block which
-			 * must be aligned to nodesize.
+			 * Offset is supposed to be a tree block which must be
+			 * aligned to sectorsize.
 			 */
-			if (!IS_ALIGNED(offset, eb->fs_info->nodesize))
+			if (!IS_ALIGNED(offset, eb->fs_info->sectorsize))
 				pr_info(
 			"\t\t\t(parent %llu not aligned to sectorsize %u)\n",
 				     offset, eb->fs_info->sectorsize);

[PATCH 4.14 099/116] cifs: fix pcchunk length type in smb2_copychunk_range

[Greg Kroah-Hartman]

From: Pawel Witek <pawel.ireneusz.witek@gmail.com>

commit d66cde50c3c868af7abddafce701bb86e4a93039 upstream.

Change type of pcchunk->Length from u32 to u64 to match
smb2_copychunk_range arguments type. Fixes the problem where performing
server-side copy with CIFS_IOC_COPYCHUNK_FILE ioctl resulted in incomplete
copy of large files while returning -EINVAL.

Fixes: 9bf0c9cd4314 ("CIFS: Fix SMB2/SMB3 Copy offload support (refcopy) for large files")
Cc: <stable@vger.kernel.org>
Signed-off-by: Pawel Witek <pawel.ireneusz.witek@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/cifs/smb2ops.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -891,7 +891,7 @@ smb2_copychunk_range(const unsigned int
 		pcchunk->SourceOffset = cpu_to_le64(src_off);
 		pcchunk->TargetOffset = cpu_to_le64(dest_off);
 		pcchunk->Length =
-			cpu_to_le32(min_t(u32, len, tcon->max_bytes_chunk));
+			cpu_to_le32(min_t(u64, len, tcon->max_bytes_chunk));
 
 		/* Request server copy to target from src identified by key */
 		kfree(retbuf);

[PATCH 4.14 100/116] sh: math-emu: fix macro redefined warning

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

commit 58a49ad90939386a8682e842c474a0d2c00ec39c upstream.

Fix a warning that was reported by the kernel test robot:

In file included from ../include/math-emu/soft-fp.h:27,
                 from ../arch/sh/math-emu/math.c:22:
../arch/sh/include/asm/sfp-machine.h:17: warning: "__BYTE_ORDER" redefined
   17 | #define __BYTE_ORDER __BIG_ENDIAN
In file included from ../arch/sh/math-emu/math.c:21:
../arch/sh/math-emu/sfp-util.h:71: note: this is the location of the previous definition
   71 | #define __BYTE_ORDER __LITTLE_ENDIAN

Fixes: b929926f01f2 ("sh: define __BIG_ENDIAN for math-emu")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: lore.kernel.org/r/202111121827.6v6SXtVv-lkp@intel.com
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230306040037.20350-5-rdunlap@infradead.org
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/sh/math-emu/sfp-util.h |    4 ----
 1 file changed, 4 deletions(-)

--- a/arch/sh/math-emu/sfp-util.h
+++ b/arch/sh/math-emu/sfp-util.h
@@ -67,7 +67,3 @@
   } while (0)
 
 #define abort()	return 0
-
-#define __BYTE_ORDER __LITTLE_ENDIAN
-
-

[PATCH 4.14 101/116] sh: nmi_debug: fix return value of __setup handler

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

commit d1155e4132de712a9d3066e2667ceaad39a539c5 upstream.

__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings. Also, error return codes don't mean anything to
obsolete_checksetup() -- only non-zero (usually 1) or zero.
So return 1 from nmi_debug_setup().

Fixes: 1e1030dccb10 ("sh: nmi_debug support.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <izh1979@gmail.com>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Cc: stable@vger.kernel.org
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230306040037.20350-3-rdunlap@infradead.org
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/sh/kernel/nmi_debug.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/sh/kernel/nmi_debug.c
+++ b/arch/sh/kernel/nmi_debug.c
@@ -52,7 +52,7 @@ static int __init nmi_debug_setup(char *
 	register_die_notifier(&nmi_debug_nb);
 
 	if (*str != '=')
-		return 0;
+		return 1;
 
 	for (p = str + 1; *p; p = sep + 1) {
 		sep = strchr(p, ',');
@@ -73,6 +73,6 @@ static int __init nmi_debug_setup(char *
 			break;
 	}
 
-	return 0;
+	return 1;
 }
 __setup("nmi_debug", nmi_debug_setup);

[PATCH 4.14 102/116] ARM: dts: exynos: fix WM8960 clock name in Itop Elite

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

commit 6c950c20da38debf1ed531e0b972bd8b53d1c11f upstream.

The WM8960 Linux driver expects the clock to be named "mclk".  Otherwise
the clock will be ignored and not prepared/enabled by the driver.

Cc: <stable@vger.kernel.org>
Fixes: 339b2fb36a67 ("ARM: dts: exynos: Add TOPEET itop elite based board")
Link: https://lore.kernel.org/r/20230217150627.779764-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/boot/dts/exynos4412-itop-elite.dts |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/boot/dts/exynos4412-itop-elite.dts
+++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts
@@ -187,7 +187,7 @@
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
 		clocks = <&pmu_system_controller 0>;
-		clock-names = "MCLK1";
+		clock-names = "mclk";
 		wlf,shared-lrclk;
 		#sound-dai-cells = <0>;
 	};

[PATCH 4.14 103/116] ARM: dts: s5pv210: correct MIPI CSIS clock name

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

commit 665b9459bb53b8f19bd1541567e1fe9782c83c4b upstream.

The Samsung S5P/Exynos MIPI CSIS bindings and Linux driver expect first
clock name to be "csis".  Otherwise the driver fails to probe.

Fixes: 94ad0f6d9278 ("ARM: dts: Add Device tree for s5pv210 SoC")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230212185818.43503-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/boot/dts/s5pv210.dtsi |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -563,7 +563,7 @@
 				interrupts = <29>;
 				clocks = <&clocks CLK_CSIS>,
 						<&clocks SCLK_CSIS>;
-				clock-names = "clk_csis",
+				clock-names = "csis",
 						"sclk_csis";
 				bus-width = <4>;
 				status = "disabled";

[PATCH 4.14 104/116] HID: wacom: Set a default resolution for older tablets

[Greg Kroah-Hartman]

From: Ping Cheng <pinglinux@gmail.com>

commit 08a46b4190d345544d04ce4fe2e1844b772b8535 upstream.

Some older tablets may not report physical maximum for X/Y
coordinates. Set a default to prevent undefined resolution.

Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Link: https://lore.kernel.org/r/20230409164229.29777-1-ping.cheng@wacom.com
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/wacom_wac.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -1734,6 +1734,7 @@ static void wacom_map_usage(struct input
 	int fmax = field->logical_maximum;
 	unsigned int equivalent_usage = wacom_equivalent_usage(usage->hid);
 	int resolution_code = code;
+	int resolution = hidinput_calc_abs_res(field, resolution_code);
 
 	if (equivalent_usage == HID_DG_TWIST) {
 		resolution_code = ABS_RZ;
@@ -1756,8 +1757,15 @@ static void wacom_map_usage(struct input
 	switch (type) {
 	case EV_ABS:
 		input_set_abs_params(input, code, fmin, fmax, fuzz, 0);
-		input_abs_set_res(input, code,
-				  hidinput_calc_abs_res(field, resolution_code));
+
+		/* older tablet may miss physical usage */
+		if ((code == ABS_X || code == ABS_Y) && !resolution) {
+			resolution = WACOM_INTUOS_RES;
+			hid_warn(input,
+				 "Wacom usage (%d) missing resolution \n",
+				 code);
+		}
+		input_abs_set_res(input, code, resolution);
 		break;
 	case EV_KEY:
 		input_set_capability(input, EV_KEY, code);

[PATCH 4.14 105/116] ext4: avoid a potential slab-out-of-bounds in ext4_group_desc_csum

[Greg Kroah-Hartman]

From: Tudor Ambarus <tudor.ambarus@linaro.org>

commit 4f04351888a83e595571de672e0a4a8b74f4fb31 upstream.

When modifying the block device while it is mounted by the filesystem,
syzbot reported the following:

BUG: KASAN: slab-out-of-bounds in crc16+0x206/0x280 lib/crc16.c:58
Read of size 1 at addr ffff888075f5c0a8 by task syz-executor.2/15586

CPU: 1 PID: 15586 Comm: syz-executor.2 Not tainted 6.2.0-rc5-syzkaller-00205-gc96618275234 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x1b1/0x290 lib/dump_stack.c:106
 print_address_description+0x74/0x340 mm/kasan/report.c:306
 print_report+0x107/0x1f0 mm/kasan/report.c:417
 kasan_report+0xcd/0x100 mm/kasan/report.c:517
 crc16+0x206/0x280 lib/crc16.c:58
 ext4_group_desc_csum+0x81b/0xb20 fs/ext4/super.c:3187
 ext4_group_desc_csum_set+0x195/0x230 fs/ext4/super.c:3210
 ext4_mb_clear_bb fs/ext4/mballoc.c:6027 [inline]
 ext4_free_blocks+0x191a/0x2810 fs/ext4/mballoc.c:6173
 ext4_remove_blocks fs/ext4/extents.c:2527 [inline]
 ext4_ext_rm_leaf fs/ext4/extents.c:2710 [inline]
 ext4_ext_remove_space+0x24ef/0x46a0 fs/ext4/extents.c:2958
 ext4_ext_truncate+0x177/0x220 fs/ext4/extents.c:4416
 ext4_truncate+0xa6a/0xea0 fs/ext4/inode.c:4342
 ext4_setattr+0x10c8/0x1930 fs/ext4/inode.c:5622
 notify_change+0xe50/0x1100 fs/attr.c:482
 do_truncate+0x200/0x2f0 fs/open.c:65
 handle_truncate fs/namei.c:3216 [inline]
 do_open fs/namei.c:3561 [inline]
 path_openat+0x272b/0x2dd0 fs/namei.c:3714
 do_filp_open+0x264/0x4f0 fs/namei.c:3741
 do_sys_openat2+0x124/0x4e0 fs/open.c:1310
 do_sys_open fs/open.c:1326 [inline]
 __do_sys_creat fs/open.c:1402 [inline]
 __se_sys_creat fs/open.c:1396 [inline]
 __x64_sys_creat+0x11f/0x160 fs/open.c:1396
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f72f8a8c0c9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f72f97e3168 EFLAGS: 00000246 ORIG_RAX: 0000000000000055
RAX: ffffffffffffffda RBX: 00007f72f8bac050 RCX: 00007f72f8a8c0c9
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000280
RBP: 00007f72f8ae7ae9 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffd165348bf R14: 00007f72f97e3300 R15: 0000000000022000

Replace
	le16_to_cpu(sbi->s_es->s_desc_size)
with
	sbi->s_desc_size

It reduces ext4's compiled text size, and makes the code more efficient
(we remove an extra indirect reference and a potential byte
swap on big endian systems), and there is no downside. It also avoids the
potential KASAN / syzkaller failure, as a bonus.

Reported-by: syzbot+fc51227e7100c9294894@syzkaller.appspotmail.com
Reported-by: syzbot+8785e41224a3afd04321@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=70d28d11ab14bd7938f3e088365252aa923cff42
Link: https://syzkaller.appspot.com/bug?id=b85721b38583ecc6b5e72ff524c67302abbc30f3
Link: https://lore.kernel.org/all/000000000000ece18705f3b20934@google.com/
Fixes: 717d50e4971b ("Ext4: Uninitialized Block Groups")
Cc: stable@vger.kernel.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20230504121525.3275886-1-tudor.ambarus@linaro.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/super.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -2343,11 +2343,9 @@ static __le16 ext4_group_desc_csum(struc
 	crc = crc16(crc, (__u8 *)gdp, offset);
 	offset += sizeof(gdp->bg_checksum); /* skip checksum */
 	/* for checksum of struct ext4_group_desc do the rest...*/
-	if (ext4_has_feature_64bit(sb) &&
-	    offset < le16_to_cpu(sbi->s_es->s_desc_size))
+	if (ext4_has_feature_64bit(sb) && offset < sbi->s_desc_size)
 		crc = crc16(crc, (__u8 *)gdp + offset,
-			    le16_to_cpu(sbi->s_es->s_desc_size) -
-				offset);
+			    sbi->s_desc_size - offset);
 
 out:
 	return cpu_to_le16(crc);

[PATCH 4.14 106/116] ext4: improve error recovery code paths in __ext4_remount()

[Greg Kroah-Hartman]

From: Theodore Ts'o <tytso@mit.edu>

commit 4c0b4818b1f636bc96359f7817a2d8bab6370162 upstream.

If there are failures while changing the mount options in
__ext4_remount(), we need to restore the old mount options.

This commit fixes two problem.  The first is there is a chance that we
will free the old quota file names before a potential failure leading
to a use-after-free.  The second problem addressed in this commit is
if there is a failed read/write to read-only transition, if the quota
has already been suspended, we need to renable quota handling.

Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230506142419.984260-2-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/super.c |   13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -5390,9 +5390,6 @@ static int ext4_remount(struct super_blo
 		ext4_commit_super(sb, 1);
 
 #ifdef CONFIG_QUOTA
-	/* Release old quota file names */
-	for (i = 0; i < EXT4_MAXQUOTAS; i++)
-		kfree(old_opts.s_qf_names[i]);
 	if (enable_quota) {
 		if (sb_any_quota_suspended(sb))
 			dquot_resume(sb, -1);
@@ -5402,6 +5399,9 @@ static int ext4_remount(struct super_blo
 				goto restore_opts;
 		}
 	}
+	/* Release old quota file names */
+	for (i = 0; i < EXT4_MAXQUOTAS; i++)
+		kfree(old_opts.s_qf_names[i]);
 #endif
 
 	*flags = (*flags & ~MS_LAZYTIME) | (sb->s_flags & MS_LAZYTIME);
@@ -5410,6 +5410,13 @@ static int ext4_remount(struct super_blo
 	return 0;
 
 restore_opts:
+	/*
+	 * If there was a failing r/w to ro transition, we may need to
+	 * re-enable quota
+	 */
+	if ((sb->s_flags & SB_RDONLY) && !(old_sb_flags & SB_RDONLY) &&
+	    sb_any_quota_suspended(sb))
+		dquot_resume(sb, -1);
 	sb->s_flags = old_sb_flags;
 	sbi->s_mount_opt = old_opts.s_mount_opt;
 	sbi->s_mount_opt2 = old_opts.s_mount_opt2;

[PATCH 4.14 107/116] ext4: add bounds checking in get_max_inline_xattr_value_size()

[Greg Kroah-Hartman]

From: Theodore Ts'o <tytso@mit.edu>

commit 2220eaf90992c11d888fe771055d4de330385f01 upstream.

Normally the extended attributes in the inode body would have been
checked when the inode is first opened, but if someone is writing to
the block device while the file system is mounted, it's possible for
the inode table to get corrupted.  Add bounds checking to avoid
reading beyond the end of allocated memory if this happens.

Reported-by: syzbot+1966db24521e5f6e23f7@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=1966db24521e5f6e23f7
Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/inline.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -38,6 +38,7 @@ static int get_max_inline_xattr_value_si
 	struct ext4_xattr_ibody_header *header;
 	struct ext4_xattr_entry *entry;
 	struct ext4_inode *raw_inode;
+	void *end;
 	int free, min_offs;
 
 	if (!EXT4_INODE_HAS_XATTR_SPACE(inode))
@@ -61,14 +62,23 @@ static int get_max_inline_xattr_value_si
 	raw_inode = ext4_raw_inode(iloc);
 	header = IHDR(inode, raw_inode);
 	entry = IFIRST(header);
+	end = (void *)raw_inode + EXT4_SB(inode->i_sb)->s_inode_size;
 
 	/* Compute min_offs. */
-	for (; !IS_LAST_ENTRY(entry); entry = EXT4_XATTR_NEXT(entry)) {
+	while (!IS_LAST_ENTRY(entry)) {
+		void *next = EXT4_XATTR_NEXT(entry);
+
+		if (next >= end) {
+			EXT4_ERROR_INODE(inode,
+					 "corrupt xattr in inline inode");
+			return 0;
+		}
 		if (!entry->e_value_inum && entry->e_value_size) {
 			size_t offs = le16_to_cpu(entry->e_value_offs);
 			if (offs < min_offs)
 				min_offs = offs;
 		}
+		entry = next;
 	}
 	free = min_offs -
 		((void *)entry - (void *)IFIRST(header)) - sizeof(__u32);

[PATCH 4.14 108/116] ext4: bail out of ext4_xattr_ibody_get() fails for any reason

[Greg Kroah-Hartman]

From: Theodore Ts'o <tytso@mit.edu>

commit 2a534e1d0d1591e951f9ece2fb460b2ff92edabd upstream.

In ext4_update_inline_data(), if ext4_xattr_ibody_get() fails for any
reason, it's best if we just fail as opposed to stumbling on,
especially if the failure is EFSCORRUPTED.

Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/inline.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -364,7 +364,7 @@ static int ext4_update_inline_data(handl
 
 	error = ext4_xattr_ibody_get(inode, i.name_index, i.name,
 				     value, len);
-	if (error == -ENODATA)
+	if (error < 0)
 		goto out;
 
 	BUFFER_TRACE(is.iloc.bh, "get_write_access");

[PATCH 4.14 109/116] ext4: remove a BUG_ON in ext4_mb_release_group_pa()

[Greg Kroah-Hartman]

From: Theodore Ts'o <tytso@mit.edu>

commit 463808f237cf73e98a1a45ff7460c2406a150a0b upstream.

If a malicious fuzzer overwrites the ext4 superblock while it is
mounted such that the s_first_data_block is set to a very large
number, the calculation of the block group can underflow, and trigger
a BUG_ON check.  Change this to be an ext4_warning so that we don't
crash the kernel.

Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230430154311.579720-3-tytso@mit.edu
Reported-by: syzbot+e2efa3efc15a1c9e95c3@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=69b28112e098b070f639efb356393af3ffec4220
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/mballoc.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -3921,7 +3921,11 @@ ext4_mb_release_group_pa(struct ext4_bud
 	trace_ext4_mb_release_group_pa(sb, pa);
 	BUG_ON(pa->pa_deleted == 0);
 	ext4_get_group_no_and_offset(sb, pa->pa_pstart, &group, &bit);
-	BUG_ON(group != e4b->bd_group && pa->pa_len != 0);
+	if (unlikely(group != e4b->bd_group && pa->pa_len != 0)) {
+		ext4_warning(sb, "bad group: expected %u, group %u, pa_start %llu",
+			     e4b->bd_group, group, pa->pa_pstart);
+		return 0;
+	}
 	mb_free_blocks(pa->pa_inode, e4b, bit, pa->pa_len);
 	atomic_add(pa->pa_len, &EXT4_SB(sb)->s_mb_discarded);
 	trace_ext4_mballoc_discard(sb, NULL, group, bit, pa->pa_len);

[PATCH 4.14 110/116] ext4: fix invalid free tracking in ext4_xattr_move_to_block()

[Greg Kroah-Hartman]

From: Theodore Ts'o <tytso@mit.edu>

commit b87c7cdf2bed4928b899e1ce91ef0d147017ba45 upstream.

In ext4_xattr_move_to_block(), the value of the extended attribute
which we need to move to an external block may be allocated by
kvmalloc() if the value is stored in an external inode.  So at the end
of the function the code tried to check if this was the case by
testing entry->e_value_inum.

However, at this point, the pointer to the xattr entry is no longer
valid, because it was removed from the original location where it had
been stored.  So we could end up calling kvfree() on a pointer which
was not allocated by kvmalloc(); or we could also potentially leak
memory by not freeing the buffer when it should be freed.  Fix this by
storing whether it should be freed in a separate variable.

Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230430160426.581366-1-tytso@mit.edu
Link: https://syzkaller.appspot.com/bug?id=5c2aee8256e30b55ccf57312c16d88417adbd5e1
Link: https://syzkaller.appspot.com/bug?id=41a6b5d4917c0412eb3b3c3c604965bed7d7420b
Reported-by: syzbot+64b645917ce07d89bde5@syzkaller.appspotmail.com
Reported-by: syzbot+0d042627c4f2ad332195@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/xattr.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -2559,6 +2559,7 @@ static int ext4_xattr_move_to_block(hand
 		.in_inode = !!entry->e_value_inum,
 	};
 	struct ext4_xattr_ibody_header *header = IHDR(inode, raw_inode);
+	int needs_kvfree = 0;
 	int error;
 
 	is = kzalloc(sizeof(struct ext4_xattr_ibody_find), GFP_NOFS);
@@ -2581,7 +2582,7 @@ static int ext4_xattr_move_to_block(hand
 			error = -ENOMEM;
 			goto out;
 		}
-
+		needs_kvfree = 1;
 		error = ext4_xattr_inode_get(inode, entry, buffer, value_size);
 		if (error)
 			goto out;
@@ -2620,7 +2621,7 @@ static int ext4_xattr_move_to_block(hand
 
 out:
 	kfree(b_entry_name);
-	if (entry->e_value_inum && buffer)
+	if (needs_kvfree && buffer)
 		kvfree(buffer);
 	if (is)
 		brelse(is->iloc.bh);

[PATCH 4.14 111/116] perf bench: Share some global variables to fix build with gcc 10

[Greg Kroah-Hartman]

From: Arnaldo Carvalho de Melo <acme@redhat.com>

[ Upstream commit e4d9b04b973b2dbce7b42af95ea70d07da1c936d ]

Noticed with gcc 10 (fedora rawhide) that those variables were not being
declared as static, so end up with:

  ld: /tmp/build/perf/bench/epoll-wait.o:/git/perf/tools/perf/bench/epoll-wait.c:93: multiple definition of `end'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here
  ld: /tmp/build/perf/bench/epoll-wait.o:/git/perf/tools/perf/bench/epoll-wait.c:93: multiple definition of `start'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here
  ld: /tmp/build/perf/bench/epoll-wait.o:/git/perf/tools/perf/bench/epoll-wait.c:93: multiple definition of `runtime'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here
  ld: /tmp/build/perf/bench/epoll-ctl.o:/git/perf/tools/perf/bench/epoll-ctl.c:38: multiple definition of `end'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here
  ld: /tmp/build/perf/bench/epoll-ctl.o:/git/perf/tools/perf/bench/epoll-ctl.c:38: multiple definition of `start'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here
  ld: /tmp/build/perf/bench/epoll-ctl.o:/git/perf/tools/perf/bench/epoll-ctl.c:38: multiple definition of `runtime'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here
  make[4]: *** [/git/perf/tools/build/Makefile.build:145: /tmp/build/perf/bench/perf-in.o] Error 1

Prefix those with bench__ and add them to bench/bench.h, so that we can
share those on the tools needing to access those variables from signal
handlers.

Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200303155811.GD13702@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/bench/bench.h         |    4 ++++
 tools/perf/bench/futex-hash.c    |   12 ++++++------
 tools/perf/bench/futex-lock-pi.c |   11 +++++------
 3 files changed, 15 insertions(+), 12 deletions(-)

--- a/tools/perf/bench/bench.h
+++ b/tools/perf/bench/bench.h
@@ -2,6 +2,10 @@
 #ifndef BENCH_H
 #define BENCH_H
 
+#include <sys/time.h>
+
+extern struct timeval bench__start, bench__end, bench__runtime;
+
 /*
  * The madvise transparent hugepage constants were added in glibc
  * 2.13. For compatibility with older versions of glibc, define these
--- a/tools/perf/bench/futex-hash.c
+++ b/tools/perf/bench/futex-hash.c
@@ -35,7 +35,7 @@ static unsigned int nfutexes = 1024;
 static bool fshared = false, done = false, silent = false;
 static int futex_flag = 0;
 
-struct timeval start, end, runtime;
+struct timeval bench__start, bench__end, bench__runtime;
 static pthread_mutex_t thread_lock;
 static unsigned int threads_starting;
 static struct stats throughput_stats;
@@ -101,8 +101,8 @@ static void toggle_done(int sig __maybe_
 {
 	/* inform all threads that we're done for the day */
 	done = true;
-	gettimeofday(&end, NULL);
-	timersub(&end, &start, &runtime);
+	gettimeofday(&bench__end, NULL);
+	timersub(&bench__end, &bench__start, &bench__runtime);
 }
 
 static void print_summary(void)
@@ -112,7 +112,7 @@ static void print_summary(void)
 
 	printf("%sAveraged %ld operations/sec (+- %.2f%%), total secs = %d\n",
 	       !silent ? "\n" : "", avg, rel_stddev_stats(stddev, avg),
-	       (int) runtime.tv_sec);
+	       (int)bench__runtime.tv_sec);
 }
 
 int bench_futex_hash(int argc, const char **argv)
@@ -156,7 +156,7 @@ int bench_futex_hash(int argc, const cha
 
 	threads_starting = nthreads;
 	pthread_attr_init(&thread_attr);
-	gettimeofday(&start, NULL);
+	gettimeofday(&bench__start, NULL);
 	for (i = 0; i < nthreads; i++) {
 		worker[i].tid = i;
 		worker[i].futex = calloc(nfutexes, sizeof(*worker[i].futex));
@@ -199,7 +199,7 @@ int bench_futex_hash(int argc, const cha
 	pthread_mutex_destroy(&thread_lock);
 
 	for (i = 0; i < nthreads; i++) {
-		unsigned long t = worker[i].ops/runtime.tv_sec;
+		unsigned long t = worker[i].ops / bench__runtime.tv_sec;
 		update_stats(&throughput_stats, t);
 		if (!silent) {
 			if (nfutexes == 1)
--- a/tools/perf/bench/futex-lock-pi.c
+++ b/tools/perf/bench/futex-lock-pi.c
@@ -34,7 +34,6 @@ static bool silent = false, multi = fals
 static bool done = false, fshared = false;
 static unsigned int ncpus, nthreads = 0;
 static int futex_flag = 0;
-struct timeval start, end, runtime;
 static pthread_mutex_t thread_lock;
 static unsigned int threads_starting;
 static struct stats throughput_stats;
@@ -61,7 +60,7 @@ static void print_summary(void)
 
 	printf("%sAveraged %ld operations/sec (+- %.2f%%), total secs = %d\n",
 	       !silent ? "\n" : "", avg, rel_stddev_stats(stddev, avg),
-	       (int) runtime.tv_sec);
+	       (int)bench__runtime.tv_sec);
 }
 
 static void toggle_done(int sig __maybe_unused,
@@ -70,8 +69,8 @@ static void toggle_done(int sig __maybe_
 {
 	/* inform all threads that we're done for the day */
 	done = true;
-	gettimeofday(&end, NULL);
-	timersub(&end, &start, &runtime);
+	gettimeofday(&bench__end, NULL);
+	timersub(&bench__end, &bench__start, &bench__runtime);
 }
 
 static void *workerfn(void *arg)
@@ -178,7 +177,7 @@ int bench_futex_lock_pi(int argc, const
 
 	threads_starting = nthreads;
 	pthread_attr_init(&thread_attr);
-	gettimeofday(&start, NULL);
+	gettimeofday(&bench__start, NULL);
 
 	create_threads(worker, thread_attr);
 	pthread_attr_destroy(&thread_attr);
@@ -204,7 +203,7 @@ int bench_futex_lock_pi(int argc, const
 	pthread_mutex_destroy(&thread_lock);
 
 	for (i = 0; i < nthreads; i++) {
-		unsigned long t = worker[i].ops/runtime.tv_sec;
+		unsigned long t = worker[i].ops / bench__runtime.tv_sec;
 
 		update_stats(&throughput_stats, t);
 		if (!silent)

[PATCH 4.14 112/116] tty: Prevent writing chars during tcsetattr TCSADRAIN/FLUSH

[Greg Kroah-Hartman]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 4215 bytes --]

From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>

If userspace races tcsetattr() with a write, the drained condition
might not be guaranteed by the kernel. There is a race window after
checking Tx is empty before tty_set_termios() takes termios_rwsem for
write. During that race window, more characters can be queued by a
racing writer.

Any ongoing transmission might produce garbage during HW's
->set_termios() call. The intent of TCSADRAIN/FLUSH seems to be
preventing such a character corruption. If those flags are set, take
tty's write lock to stop any writer before performing the lower layer
Tx empty check and wait for the pending characters to be sent (if any).

The initial wait for all-writers-done must be placed outside of tty's
write lock to avoid deadlock which makes it impossible to use
tty_wait_until_sent(). The write lock is retried if a racing write is
detected.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230317113318.31327-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 094fb49a2d0d6827c86d2e0840873e6db0c491d2)
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/tty_io.c    |    4 ++--
 drivers/tty/tty_ioctl.c |   45 +++++++++++++++++++++++++++++++++------------
 include/linux/tty.h     |    2 ++
 3 files changed, 37 insertions(+), 14 deletions(-)

--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -874,13 +874,13 @@ static ssize_t tty_read(struct file *fil
 	return i;
 }
 
-static void tty_write_unlock(struct tty_struct *tty)
+void tty_write_unlock(struct tty_struct *tty)
 {
 	mutex_unlock(&tty->atomic_write_lock);
 	wake_up_interruptible_poll(&tty->write_wait, POLLOUT);
 }
 
-static int tty_write_lock(struct tty_struct *tty, int ndelay)
+int tty_write_lock(struct tty_struct *tty, int ndelay)
 {
 	if (!mutex_trylock(&tty->atomic_write_lock)) {
 		if (ndelay)
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -396,21 +396,42 @@ static int set_termios(struct tty_struct
 	tmp_termios.c_ispeed = tty_termios_input_baud_rate(&tmp_termios);
 	tmp_termios.c_ospeed = tty_termios_baud_rate(&tmp_termios);
 
-	ld = tty_ldisc_ref(tty);
+	if (opt & (TERMIOS_FLUSH|TERMIOS_WAIT)) {
+retry_write_wait:
+		retval = wait_event_interruptible(tty->write_wait, !tty_chars_in_buffer(tty));
+		if (retval < 0)
+			return retval;
 
-	if (ld != NULL) {
-		if ((opt & TERMIOS_FLUSH) && ld->ops->flush_buffer)
-			ld->ops->flush_buffer(tty);
-		tty_ldisc_deref(ld);
-	}
+		if (tty_write_lock(tty, 0) < 0)
+			goto retry_write_wait;
 
-	if (opt & TERMIOS_WAIT) {
-		tty_wait_until_sent(tty, 0);
-		if (signal_pending(current))
-			return -ERESTARTSYS;
-	}
+		/* Racing writer? */
+		if (tty_chars_in_buffer(tty)) {
+			tty_write_unlock(tty);
+			goto retry_write_wait;
+		}
+
+		ld = tty_ldisc_ref(tty);
+		if (ld != NULL) {
+			if ((opt & TERMIOS_FLUSH) && ld->ops->flush_buffer)
+				ld->ops->flush_buffer(tty);
+			tty_ldisc_deref(ld);
+		}
 
-	tty_set_termios(tty, &tmp_termios);
+		if ((opt & TERMIOS_WAIT) && tty->ops->wait_until_sent) {
+			tty->ops->wait_until_sent(tty, 0);
+			if (signal_pending(current)) {
+				tty_write_unlock(tty);
+				return -ERESTARTSYS;
+			}
+		}
+
+		tty_set_termios(tty, &tmp_termios);
+
+		tty_write_unlock(tty);
+	} else {
+		tty_set_termios(tty, &tmp_termios);
+	}
 
 	/* FIXME: Arguably if tmp_termios == tty->termios AND the
 	   actual requested termios was not tmp_termios then we may
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -479,6 +479,8 @@ extern void __stop_tty(struct tty_struct
 extern void stop_tty(struct tty_struct *tty);
 extern void __start_tty(struct tty_struct *tty);
 extern void start_tty(struct tty_struct *tty);
+void tty_write_unlock(struct tty_struct *tty);
+int tty_write_lock(struct tty_struct *tty, int ndelay);
 extern int tty_register_driver(struct tty_driver *driver);
 extern int tty_unregister_driver(struct tty_driver *driver);
 extern struct device *tty_register_device(struct tty_driver *driver,

[PATCH 4.14 113/116] serial: 8250: Fix serial8250_tx_empty() race with DMA Tx

[Greg Kroah-Hartman]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 3206 bytes --]

From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>

There's a potential race before THRE/TEMT deasserts when DMA Tx is
starting up (or the next batch of continuous Tx is being submitted).
This can lead to misdetecting Tx empty condition.

It is entirely normal for THRE/TEMT to be set for some time after the
DMA Tx had been setup in serial8250_tx_dma(). As Tx side is definitely
not empty at that point, it seems incorrect for serial8250_tx_empty()
claim Tx is empty.

Fix the race by also checking in serial8250_tx_empty() whether there's
DMA Tx active.

Note: This fix only addresses in-kernel race mainly to make using
TCSADRAIN/FLUSH robust. Userspace can still cause other races but they
seem userspace concurrency control problems.

Fixes: 9ee4b83e51f74 ("serial: 8250: Add support for dmaengine")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230317113318.31327-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 146a37e05d620cef4ad430e5d1c9c077fe6fa76f)
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250.h      |   12 ++++++++++++
 drivers/tty/serial/8250/8250_port.c |   12 +++++++++---
 2 files changed, 21 insertions(+), 3 deletions(-)

--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -221,6 +221,13 @@ extern int serial8250_rx_dma(struct uart
 extern void serial8250_rx_dma_flush(struct uart_8250_port *);
 extern int serial8250_request_dma(struct uart_8250_port *);
 extern void serial8250_release_dma(struct uart_8250_port *);
+
+static inline bool serial8250_tx_dma_running(struct uart_8250_port *p)
+{
+	struct uart_8250_dma *dma = p->dma;
+
+	return dma && dma->tx_running;
+}
 #else
 static inline int serial8250_tx_dma(struct uart_8250_port *p)
 {
@@ -236,6 +243,11 @@ static inline int serial8250_request_dma
 	return -1;
 }
 static inline void serial8250_release_dma(struct uart_8250_port *p) { }
+
+static inline bool serial8250_tx_dma_running(struct uart_8250_port *p)
+{
+	return false;
+}
 #endif
 
 static inline int ns16550a_goto_highspeed(struct uart_8250_port *up)
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1968,19 +1968,25 @@ static int serial8250_tx_threshold_handl
 static unsigned int serial8250_tx_empty(struct uart_port *port)
 {
 	struct uart_8250_port *up = up_to_u8250p(port);
+	unsigned int result = 0;
 	unsigned long flags;
 	unsigned int lsr;
 
 	serial8250_rpm_get(up);
 
 	spin_lock_irqsave(&port->lock, flags);
-	lsr = serial_port_in(port, UART_LSR);
-	up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
+	if (!serial8250_tx_dma_running(up)) {
+		lsr = serial_port_in(port, UART_LSR);
+		up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
+
+		if ((lsr & BOTH_EMPTY) == BOTH_EMPTY)
+			result = TIOCSER_TEMT;
+	}
 	spin_unlock_irqrestore(&port->lock, flags);
 
 	serial8250_rpm_put(up);
 
-	return (lsr & BOTH_EMPTY) == BOTH_EMPTY ? TIOCSER_TEMT : 0;
+	return result;
 }
 
 unsigned int serial8250_do_get_mctrl(struct uart_port *port)

[PATCH 4.14 114/116] drbd: correctly submit flush bio on barrier

[Greg Kroah-Hartman]

From: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>

commit 3899d94e3831ee07ea6821c032dc297aec80586a upstream.

When we receive a flush command (or "barrier" in DRBD), we currently use
a REQ_OP_FLUSH with the REQ_PREFLUSH flag set.

The correct way to submit a flush bio is by using a REQ_OP_WRITE without
any data, and set the REQ_PREFLUSH flag.

Since commit b4a6bb3a67aa ("block: add a sanity check for non-write
flush/fua bios"), this triggers a warning in the block layer, but this
has been broken for quite some time before that.

So use the correct set of flags to actually make the flush happen.

Cc: Christoph Hellwig <hch@infradead.org>
Cc: stable@vger.kernel.org
Fixes: f9ff0da56437 ("drbd: allow parallel flushes for multi-volume resources")
Reported-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230503121937.17232-1-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/drbd/drbd_receiver.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -1309,7 +1309,7 @@ static void submit_one_flush(struct drbd
 	bio_set_dev(bio, device->ldev->backing_bdev);
 	bio->bi_private = octx;
 	bio->bi_end_io = one_flush_endio;
-	bio->bi_opf = REQ_OP_FLUSH | REQ_PREFLUSH;
+	bio->bi_opf = REQ_OP_WRITE | REQ_PREFLUSH;
 
 	device->flush_jif = jiffies;
 	set_bit(FLUSH_PENDING, &device->flags);

[PATCH 4.14 115/116] printk: declare printk_deferred_{enter,safe}() in include/linux/printk.h

[Greg Kroah-Hartman]

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

commit 85e3e7fbbb720b9897fba9a99659e31cbd1c082e upstream.

[This patch implements subset of original commit 85e3e7fbbb72 ("printk:
remove NMI tracking") where commit 1007843a9190 ("mm/page_alloc: fix
potential deadlock on zonelist_update_seq seqlock") depends on, for
commit 3d36424b3b58 ("mm/page_alloc: fix race condition between
build_all_zonelists and page allocation") was backported to stable.]

All NMI contexts are handled the same as the safe context: store the
message and defer printing. There is no need to have special NMI
context tracking for this. Using in_nmi() is enough.

There are several parts of the kernel that are manually calling into
the printk NMI context tracking in order to cause general printk
deferred printing:

    arch/arm/kernel/smp.c
    arch/powerpc/kexec/crash.c
    kernel/trace/trace.c

For arm/kernel/smp.c and powerpc/kexec/crash.c, provide a new
function pair printk_deferred_enter/exit that explicitly achieves the
same objective.

For ftrace, remove the printk context manipulation completely. It was
added in commit 03fc7f9c99c1 ("printk/nmi: Prevent deadlock when
accessing the main log buffer in NMI"). The purpose was to enforce
storing messages directly into the ring buffer even in NMI context.
It really should have only modified the behavior in NMI context.
There is no need for a special behavior any longer. All messages are
always stored directly now. The console deferring is handled
transparently in vprintk().

Signed-off-by: John Ogness <john.ogness@linutronix.de>
[pmladek@suse.com: Remove special handling in ftrace.c completely.
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210715193359.25946-5-john.ogness@linutronix.de
[penguin-kernel: Copy only printk_deferred_{enter,safe}() definition ]
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/printk.h |   19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

--- a/include/linux/printk.h
+++ b/include/linux/printk.h
@@ -528,4 +528,23 @@ static inline void print_hex_dump_debug(
 }
 #endif
 
+#ifdef CONFIG_PRINTK
+extern void __printk_safe_enter(void);
+extern void __printk_safe_exit(void);
+/*
+ * The printk_deferred_enter/exit macros are available only as a hack for
+ * some code paths that need to defer all printk console printing. Interrupts
+ * must be disabled for the deferred duration.
+ */
+#define printk_deferred_enter __printk_safe_enter
+#define printk_deferred_exit __printk_safe_exit
+#else
+static inline void printk_deferred_enter(void)
+{
+}
+static inline void printk_deferred_exit(void)
+{
+}
+#endif
+
 #endif

[PATCH 4.14 116/116] mm/page_alloc: fix potential deadlock on zonelist_update_seq seqlock

[Greg Kroah-Hartman]

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

commit 1007843a91909a4995ee78a538f62d8665705b66 upstream.

syzbot is reporting circular locking dependency which involves
zonelist_update_seq seqlock [1], for this lock is checked by memory
allocation requests which do not need to be retried.

One deadlock scenario is kmalloc(GFP_ATOMIC) from an interrupt handler.

  CPU0
  ----
  __build_all_zonelists() {
    write_seqlock(&zonelist_update_seq); // makes zonelist_update_seq.seqcount odd
    // e.g. timer interrupt handler runs at this moment
      some_timer_func() {
        kmalloc(GFP_ATOMIC) {
          __alloc_pages_slowpath() {
            read_seqbegin(&zonelist_update_seq) {
              // spins forever because zonelist_update_seq.seqcount is odd
            }
          }
        }
      }
    // e.g. timer interrupt handler finishes
    write_sequnlock(&zonelist_update_seq); // makes zonelist_update_seq.seqcount even
  }

This deadlock scenario can be easily eliminated by not calling
read_seqbegin(&zonelist_update_seq) from !__GFP_DIRECT_RECLAIM allocation
requests, for retry is applicable to only __GFP_DIRECT_RECLAIM allocation
requests.  But Michal Hocko does not know whether we should go with this
approach.

Another deadlock scenario which syzbot is reporting is a race between
kmalloc(GFP_ATOMIC) from tty_insert_flip_string_and_push_buffer() with
port->lock held and printk() from __build_all_zonelists() with
zonelist_update_seq held.

  CPU0                                   CPU1
  ----                                   ----
  pty_write() {
    tty_insert_flip_string_and_push_buffer() {
                                         __build_all_zonelists() {
                                           write_seqlock(&zonelist_update_seq);
                                           build_zonelists() {
                                             printk() {
                                               vprintk() {
                                                 vprintk_default() {
                                                   vprintk_emit() {
                                                     console_unlock() {
                                                       console_flush_all() {
                                                         console_emit_next_record() {
                                                           con->write() = serial8250_console_write() {
      spin_lock_irqsave(&port->lock, flags);
      tty_insert_flip_string() {
        tty_insert_flip_string_fixed_flag() {
          __tty_buffer_request_room() {
            tty_buffer_alloc() {
              kmalloc(GFP_ATOMIC | __GFP_NOWARN) {
                __alloc_pages_slowpath() {
                  zonelist_iter_begin() {
                    read_seqbegin(&zonelist_update_seq); // spins forever because zonelist_update_seq.seqcount is odd
                                                             spin_lock_irqsave(&port->lock, flags); // spins forever because port->lock is held
                    }
                  }
                }
              }
            }
          }
        }
      }
      spin_unlock_irqrestore(&port->lock, flags);
                                                             // message is printed to console
                                                             spin_unlock_irqrestore(&port->lock, flags);
                                                           }
                                                         }
                                                       }
                                                     }
                                                   }
                                                 }
                                               }
                                             }
                                           }
                                           write_sequnlock(&zonelist_update_seq);
                                         }
    }
  }

This deadlock scenario can be eliminated by

  preventing interrupt context from calling kmalloc(GFP_ATOMIC)

and

  preventing printk() from calling console_flush_all()

while zonelist_update_seq.seqcount is odd.

Since Petr Mladek thinks that __build_all_zonelists() can become a
candidate for deferring printk() [2], let's address this problem by

  disabling local interrupts in order to avoid kmalloc(GFP_ATOMIC)

and

  disabling synchronous printk() in order to avoid console_flush_all()

.

As a side effect of minimizing duration of zonelist_update_seq.seqcount
being odd by disabling synchronous printk(), latency at
read_seqbegin(&zonelist_update_seq) for both !__GFP_DIRECT_RECLAIM and
__GFP_DIRECT_RECLAIM allocation requests will be reduced.  Although, from
lockdep perspective, not calling read_seqbegin(&zonelist_update_seq) (i.e.
do not record unnecessary locking dependency) from interrupt context is
still preferable, even if we don't allow calling kmalloc(GFP_ATOMIC)
inside
write_seqlock(&zonelist_update_seq)/write_sequnlock(&zonelist_update_seq)
section...

Link: https://lkml.kernel.org/r/8796b95c-3da3-5885-fddd-6ef55f30e4d3@I-love.SAKURA.ne.jp
Fixes: 3d36424b3b58 ("mm/page_alloc: fix race condition between build_all_zonelists and page allocation")
Link: https://lkml.kernel.org/r/ZCrs+1cDqPWTDFNM@alley [2]
Reported-by: syzbot <syzbot+223c7461c58c58a4cb10@syzkaller.appspotmail.com>
  Link: https://syzkaller.appspot.com/bug?extid=223c7461c58c58a4cb10 [1]
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Petr Mladek <pmladek@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Patrick Daly <quic_pdaly@quicinc.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/page_alloc.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -5213,7 +5213,21 @@ static void __build_all_zonelists(void *
 	int nid;
 	int __maybe_unused cpu;
 	pg_data_t *self = data;
+	unsigned long flags;
 
+	/*
+	 * Explicitly disable this CPU's interrupts before taking seqlock
+	 * to prevent any IRQ handler from calling into the page allocator
+	 * (e.g. GFP_ATOMIC) that could hit zonelist_iter_begin and livelock.
+	 */
+	local_irq_save(flags);
+	/*
+	 * Explicitly disable this CPU's synchronous printk() before taking
+	 * seqlock to prevent any printk() from trying to hold port->lock, for
+	 * tty_insert_flip_string_and_push_buffer() on other CPU might be
+	 * calling kmalloc(GFP_ATOMIC | __GFP_NOWARN) with port->lock held.
+	 */
+	printk_deferred_enter();
 	write_seqlock(&zonelist_update_seq);
 
 #ifdef CONFIG_NUMA
@@ -5248,6 +5262,8 @@ static void __build_all_zonelists(void *
 	}
 
 	write_sequnlock(&zonelist_update_seq);
+	printk_deferred_exit();
+	local_irq_restore(flags);
 }
 
 static noinline void __init

RE: [PATCH 4.14 000/116] 4.14.315-rc1 review

[Chris Paterson]

Hello Greg,

> From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Sent: Monday, May 15, 2023 5:25 PM
> 
> This is the start of the stable review cycle for the 4.14.315 release.
> There are 116 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 17 May 2023 16:16:37 +0000.
> Anything received after that time might be too late.

CIP configurations built and booted with Linux 4.14.315-rc1 (854d9237fbd3):
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/pipelines/867957506
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/commits/linux-4.14.y

Tested-by: Chris Paterson (CIP) <chris.paterson2@renesas.com>

Kind regards, Chris

Re: [PATCH 4.14 000/116] 4.14.315-rc1 review

[Harshit Mogalapalli]

Hi Greg,

On 15/05/23 9:54 pm, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.315 release.
> There are 116 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 

No problems seen on aarch64.

Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>

Thanks,
Harshit

> Responses should be made by Wed, 17 May 2023 16:16:37 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.315-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

Re: [PATCH 4.14 000/116] 4.14.315-rc1 review

[Naresh Kamboju]

On Mon, 15 May 2023 at 22:03, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.14.315 release.
> There are 116 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 17 May 2023 16:16:37 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.315-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h


Results from Linaro’s test farm.
Regressions on arm64, arm, x86_64 and i386.

Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>

We have recently upgraded our selftest sources to stable-rc 6.3 and
running on stable rc 6.1, 5.15, 5.10, 5.4, 4.19 and 4.14 kernels.

List of test regressions:
========

ltp-syscalls
  - fallocate06 - FAILS on arm and arm64.

kselftest-kvm
  - kvm_xapic_state_test - FAILS on x86.

======

ltp-syscalls
  - fallocate06 - FAILS on arm and arm64.

fallocate06.c:155: TFAIL: fallocate(FALLOC_FL_PUNCH_HOLE |
FALLOC_FL_KEEP_SIZE) failed unexpectedly: ENOSPC (28)

Test log links,
========
 - https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.14.y/build/v4.14.314-117-g854d9237fbd3/testrun/17026942/suite/ltp-syscalls/test/fallocate06/history/
 - https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.14.y/build/v4.14.314-117-g854d9237fbd3/testrun/17026942/suite/ltp-syscalls/test/fallocate06/log

=========
kselftest-kvm
  - kvm_xapic_state_test - - FAILS on x86.

# selftests: kvm: xapic_state_test
# ==== Test Assertion Failure ====
#   x86_64/xapic_state_test.c:147: apic_id == expected
#   pid=4581 tid=4581 errno=4 - Interrupted system call
#      1 0x0000000000402bac: ?? ??:0
#      2 0x00000000004025ba: ?? ??:0
#      3 0x00007f8bc10e557a: ?? ??:0
#      4 0x00007f8bc10e562f: ?? ??:0
#      5 0x0000000000402624: ?? ??:0
#   APIC_ID not set back to xAPIC format; wanted = 1000000, got = 1
not ok 46 selftests: kvm: xapic_state_test # exit=254

Test log links,
========
 - https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.14.y/build/v4.14.314-117-g854d9237fbd3/testrun/17025913/suite/kselftest-kvm/test/kvm_xapic_state_test/history/
 - https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.14.y/build/v4.14.314-117-g854d9237fbd3/testrun/17025913/suite/kselftest-kvm/test/kvm_xapic_state_test/log

## Build
* kernel: 4.14.315-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-4.14.y
* git commit: 854d9237fbd3cc4b72183256a0fa5edf2f967d88
* git describe: v4.14.314-117-g854d9237fbd3
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.14.y/build/v4.14.314-117-g854d9237fbd3

## Test Regressions (compared to v4.14.311-134-g05f80276ba11)

* dragonboard-410c, ltp-syscalls
  - fallocate06

* juno-r2, ltp-syscalls
  - fallocate06

* juno-r2-kasan, ltp-syscalls
  - fallocate06

* x86, kselftest-kvm
  - kvm_xapic_state_test

## Metric Regressions (compared to v4.14.311-134-g05f80276ba11)

## Test Fixes (compared to v4.14.311-134-g05f80276ba11)

## Metric Fixes (compared to v4.14.311-134-g05f80276ba11)

## Test result summary
total: 79873, pass: 67657, fail: 2892, skip: 9170, xfail: 154

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 108 total, 104 passed, 4 failed
* arm64: 35 total, 31 passed, 4 failed
* i386: 21 total, 18 passed, 3 failed
* mips: 21 total, 21 passed, 0 failed
* parisc: 6 total, 6 passed, 0 failed
* powerpc: 8 total, 7 passed, 1 failed
* s390: 6 total, 5 passed, 1 failed
* sh: 12 total, 12 passed, 0 failed
* sparc: 6 total, 6 passed, 0 failed
* x86_64: 27 total, 23 passed, 4 failed

## Test suites summary
* boot
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers-dma-buf
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-firmware
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-net
* kselftest-net-forwarding
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* rcutorture
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.14 000/116] 4.14.315-rc1 review

[Guenter Roeck]

On Mon, May 15, 2023 at 06:24:57PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.315 release.
> There are 116 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 17 May 2023 16:16:37 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 168 pass: 168 fail: 0
Qemu test results:
	total: 430 pass: 430 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter