* FAILED: patch "[PATCH] usb: dwc3: fix gadget mode suspend interrupt handler issue" failed to apply to 5.15-stable tree
@ 2023-05-22 17:23 gregkh
0 siblings, 0 replies; only message in thread
From: gregkh @ 2023-05-22 17:23 UTC (permalink / raw)
To: quic_linyyuan, Thinh.Nguyen, gregkh, stable; +Cc: stable
The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x 4e8ef34e36f2839ef8c8da521ab7035956436818
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2023052255-basics-sixfold-353c@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^..
Possible dependencies:
4e8ef34e36f2 ("usb: dwc3: fix gadget mode suspend interrupt handler issue")
92c08a84b53e ("usb: dwc3: Add function suspend and function wakeup support")
047161686b81 ("usb: dwc3: Add remote wakeup handling")
63c4c320ccf7 ("usb: dwc3: gadget: Check for L1/L2/U3 for Start Transfer")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 4e8ef34e36f2839ef8c8da521ab7035956436818 Mon Sep 17 00:00:00 2001
From: Linyu Yuan <quic_linyyuan@quicinc.com>
Date: Fri, 12 May 2023 08:45:24 +0800
Subject: [PATCH] usb: dwc3: fix gadget mode suspend interrupt handler issue
When work in gadget mode, currently driver doesn't update software level
link_state correctly as link state change event is not enabled for most
devices, in function dwc3_gadget_suspend_interrupt(), it will only pass
suspend event to UDC core when software level link state changes, so when
interrupt generated in sequences of suspend -> reset -> conndone ->
suspend, link state is not updated during reset and conndone, so second
suspend interrupt event will not pass to UDC core.
Remove link_state compare in dwc3_gadget_suspend_interrupt() and add a
suspended flag to replace the compare function.
Fixes: 799e9dc82968 ("usb: dwc3: gadget: conditionally disable Link State change events")
Cc: stable <stable@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/20230512004524.31950-1-quic_linyyuan@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index d56457c02996..1f043c31a096 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1116,6 +1116,7 @@ struct dwc3_scratchpad_array {
* @dis_metastability_quirk: set to disable metastability quirk.
* @dis_split_quirk: set to disable split boundary.
* @wakeup_configured: set if the device is configured for remote wakeup.
+ * @suspended: set to track suspend event due to U3/L2.
* @imod_interval: set the interrupt moderation interval in 250ns
* increments or 0 to disable.
* @max_cfg_eps: current max number of IN eps used across all USB configs.
@@ -1332,6 +1333,7 @@ struct dwc3 {
unsigned dis_split_quirk:1;
unsigned async_callbacks:1;
unsigned wakeup_configured:1;
+ unsigned suspended:1;
u16 imod_interval;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 2996bcb4d53d..d831f5acf7b5 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2440,6 +2440,7 @@ static int dwc3_gadget_func_wakeup(struct usb_gadget *g, int intf_id)
return -EINVAL;
}
dwc3_resume_gadget(dwc);
+ dwc->suspended = false;
dwc->link_state = DWC3_LINK_STATE_U0;
}
@@ -3942,6 +3943,8 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
{
int reg;
+ dwc->suspended = false;
+
dwc3_gadget_set_link_state(dwc, DWC3_LINK_STATE_RX_DET);
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
@@ -3966,6 +3969,8 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
{
u32 reg;
+ dwc->suspended = false;
+
/*
* Ideally, dwc3_reset_gadget() would trigger the function
* drivers to stop any active transfers through ep disable.
@@ -4184,6 +4189,8 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc, unsigned int evtinfo)
{
+ dwc->suspended = false;
+
/*
* TODO take core out of low power mode when that's
* implemented.
@@ -4281,6 +4288,7 @@ static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
if (dwc->gadget->wakeup_armed) {
dwc3_gadget_enable_linksts_evts(dwc, false);
dwc3_resume_gadget(dwc);
+ dwc->suspended = false;
}
break;
case DWC3_LINK_STATE_U1:
@@ -4307,8 +4315,10 @@ static void dwc3_gadget_suspend_interrupt(struct dwc3 *dwc,
{
enum dwc3_link_state next = evtinfo & DWC3_LINK_STATE_MASK;
- if (dwc->link_state != next && next == DWC3_LINK_STATE_U3)
+ if (!dwc->suspended && next == DWC3_LINK_STATE_U3) {
+ dwc->suspended = true;
dwc3_suspend_gadget(dwc);
+ }
dwc->link_state = next;
}
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2023-05-22 17:24 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-05-22 17:23 FAILED: patch "[PATCH] usb: dwc3: fix gadget mode suspend interrupt handler issue" failed to apply to 5.15-stable tree gregkh
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).