[PATCH AUTOSEL 5.4 1/8] regmap: Account for register length when chunking

[PATCH AUTOSEL 5.4 1/8] regmap: Account for register length when chunking

[Sasha Levin]

From: Jim Wylder <jwylder@google.com>

[ Upstream commit 3981514180c987a79ea98f0ae06a7cbf58a9ac0f ]

Currently, when regmap_raw_write() splits the data, it uses the
max_raw_write value defined for the bus.  For any bus that includes
the target register address in the max_raw_write value, the chunked
transmission will always exceed the maximum transmission length.
To avoid this problem, subtract the length of the register and the
padding from the maximum transmission.

Signed-off-by: Jim Wylder <jwylder@google.com
Link: https://lore.kernel.org/r/20230517152444.3690870-2-jwylder@google.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/regmap/regmap.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index 43c0452a8ba91..a69e9797fba21 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -1850,6 +1850,8 @@ int _regmap_raw_write(struct regmap *map, unsigned int reg,
 	size_t val_count = val_len / val_bytes;
 	size_t chunk_count, chunk_bytes;
 	size_t chunk_regs = val_count;
+	size_t max_data = map->max_raw_write - map->format.reg_bytes -
+			map->format.pad_bytes;
 	int ret, i;
 
 	if (!val_count)
@@ -1857,8 +1859,8 @@ int _regmap_raw_write(struct regmap *map, unsigned int reg,
 
 	if (map->use_single_write)
 		chunk_regs = 1;
-	else if (map->max_raw_write && val_len > map->max_raw_write)
-		chunk_regs = map->max_raw_write / val_bytes;
+	else if (map->max_raw_write && val_len > max_data)
+		chunk_regs = max_data / val_bytes;
 
 	chunk_count = val_count / chunk_regs;
 	chunk_bytes = chunk_regs * val_bytes;
-- 
2.39.2

[PATCH AUTOSEL 5.4 2/8] scsi: target: iscsi: Prevent login threads from racing between each other

[Sasha Levin]

From: Maurizio Lombardi <mlombard@redhat.com>

[ Upstream commit 2a737d3b8c792400118d6cf94958f559de9c5e59 ]

The tpg->np_login_sem is a semaphore that is used to serialize the login
process when multiple login threads run concurrently against the same
target portal group.

The iscsi_target_locate_portal() function finds the tpg, calls
iscsit_access_np() against the np_login_sem semaphore and saves the tpg
pointer in conn->tpg;

If iscsi_target_locate_portal() fails, the caller will check for the
conn->tpg pointer and, if it's not NULL, then it will assume that
iscsi_target_locate_portal() called iscsit_access_np() on the semaphore.

Make sure that conn->tpg gets initialized only if iscsit_access_np() was
successful, otherwise iscsit_deaccess_np() may end up being called against
a semaphore we never took, allowing more than one thread to access the same
tpg.

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Link: https://lore.kernel.org/r/20230508162219.1731964-4-mlombard@redhat.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/iscsi/iscsi_target_nego.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/target/iscsi/iscsi_target_nego.c b/drivers/target/iscsi/iscsi_target_nego.c
index e32d93b927428..4017464a5909b 100644
--- a/drivers/target/iscsi/iscsi_target_nego.c
+++ b/drivers/target/iscsi/iscsi_target_nego.c
@@ -1053,6 +1053,7 @@ int iscsi_target_locate_portal(
 	iscsi_target_set_sock_callbacks(conn);
 
 	login->np = np;
+	conn->tpg = NULL;
 
 	login_req = (struct iscsi_login_req *) login->req;
 	payload_length = ntoh24(login_req->dlength);
@@ -1122,7 +1123,6 @@ int iscsi_target_locate_portal(
 	 */
 	sessiontype = strncmp(s_buf, DISCOVERY, 9);
 	if (!sessiontype) {
-		conn->tpg = iscsit_global->discovery_tpg;
 		if (!login->leading_connection)
 			goto get_target;
 
@@ -1139,9 +1139,11 @@ int iscsi_target_locate_portal(
 		 * Serialize access across the discovery struct iscsi_portal_group to
 		 * process login attempt.
 		 */
+		conn->tpg = iscsit_global->discovery_tpg;
 		if (iscsit_access_np(np, conn->tpg) < 0) {
 			iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR,
 				ISCSI_LOGIN_STATUS_SVC_UNAVAILABLE);
+			conn->tpg = NULL;
 			ret = -1;
 			goto out;
 		}
-- 
2.39.2

[PATCH AUTOSEL 5.4 3/8] HID: google: add jewel USB id

[Sasha Levin]

From: Sung-Chi Li <lschyi@chromium.org>

[ Upstream commit ed84c4517a5bc536e8572a01dfa11bc22a280d06 ]

Add 1 additional hammer-like device.

Signed-off-by: Sung-Chi Li <lschyi@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-google-hammer.c | 2 ++
 drivers/hid/hid-ids.h           | 1 +
 2 files changed, 3 insertions(+)

diff --git a/drivers/hid/hid-google-hammer.c b/drivers/hid/hid-google-hammer.c
index b6947d7573473..2ebad3ed4e3af 100644
--- a/drivers/hid/hid-google-hammer.c
+++ b/drivers/hid/hid-google-hammer.c
@@ -473,6 +473,8 @@ static const struct hid_device_id hammer_devices[] = {
 		     USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_EEL) },
 	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
 		     USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_HAMMER) },
+	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
+		     USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_JEWEL) },
 	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
 		     USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_MAGNEMITE) },
 	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index b883423a89c5d..479516bbb61bf 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -490,6 +490,7 @@
 #define USB_DEVICE_ID_GOOGLE_MOONBALL	0x5044
 #define USB_DEVICE_ID_GOOGLE_DON	0x5050
 #define USB_DEVICE_ID_GOOGLE_EEL	0x5057
+#define USB_DEVICE_ID_GOOGLE_JEWEL	0x5061
 
 #define USB_VENDOR_ID_GOTOP		0x08f2
 #define USB_DEVICE_ID_SUPER_Q2		0x007f
-- 
2.39.2

[PATCH AUTOSEL 5.4 4/8] HID: wacom: Add error check to wacom_parse_and_register()

[Sasha Levin]

From: Denis Arefev <arefev@swemel.ru>

[ Upstream commit 16a9c24f24fbe4564284eb575b18cc20586b9270 ]

   Added a variable check and
   transition in case of an error

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Denis Arefev <arefev@swemel.ru>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/wacom_sys.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
index a93070f5b214c..36cb456709ed7 100644
--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -2419,8 +2419,13 @@ static int wacom_parse_and_register(struct wacom *wacom, bool wireless)
 		goto fail_quirks;
 	}
 
-	if (features->device_type & WACOM_DEVICETYPE_WL_MONITOR)
+	if (features->device_type & WACOM_DEVICETYPE_WL_MONITOR) {
 		error = hid_hw_open(hdev);
+		if (error) {
+			hid_err(hdev, "hw open failed\n");
+			goto fail_quirks;
+		}
+	}
 
 	wacom_set_shared_values(wacom_wac);
 	devres_close_group(&hdev->dev, wacom);
-- 
2.39.2

[PATCH AUTOSEL 5.4 5/8] arm64: Add missing Set/Way CMO encodings

[Sasha Levin]

From: Marc Zyngier <maz@kernel.org>

[ Upstream commit 8d0f019e4c4f2ee2de81efd9bf1c27e9fb3c0460 ]

Add the missing Set/Way CMOs that apply to tagged memory.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20230515204601.1270428-2-maz@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/sysreg.h | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index 5b3bdad66b27e..1ff93878c8132 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -102,8 +102,14 @@
 #define SB_BARRIER_INSN			__SYS_BARRIER_INSN(0, 7, 31)
 
 #define SYS_DC_ISW			sys_insn(1, 0, 7, 6, 2)
+#define SYS_DC_IGSW			sys_insn(1, 0, 7, 6, 4)
+#define SYS_DC_IGDSW			sys_insn(1, 0, 7, 6, 6)
 #define SYS_DC_CSW			sys_insn(1, 0, 7, 10, 2)
+#define SYS_DC_CGSW			sys_insn(1, 0, 7, 10, 4)
+#define SYS_DC_CGDSW			sys_insn(1, 0, 7, 10, 6)
 #define SYS_DC_CISW			sys_insn(1, 0, 7, 14, 2)
+#define SYS_DC_CIGSW			sys_insn(1, 0, 7, 14, 4)
+#define SYS_DC_CIGDSW			sys_insn(1, 0, 7, 14, 6)
 
 #define SYS_OSDTRRX_EL1			sys_reg(2, 0, 0, 0, 2)
 #define SYS_MDCCINT_EL1			sys_reg(2, 0, 0, 2, 0)
-- 
2.39.2

[PATCH AUTOSEL 5.4 6/8] media: cec: core: don't set last_initiator if tx in progress

[Sasha Levin]

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit 73af6c7511038249cad3d5f3b44bf8d78ac0f499 ]

When a message was received the last_initiator is set to 0xff.
This will force the signal free time for the next transmit
to that for a new initiator. However, if a new transmit is
already in progress, then don't set last_initiator, since
that's the initiator of the current transmit. Overwriting
this would cause the signal free time of a following transmit
to be that of the new initiator instead of a next transmit.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/cec/cec-adap.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/media/cec/cec-adap.c b/drivers/media/cec/cec-adap.c
index c665f7d20c448..4c1770b8128cb 100644
--- a/drivers/media/cec/cec-adap.c
+++ b/drivers/media/cec/cec-adap.c
@@ -1077,7 +1077,8 @@ void cec_received_msg_ts(struct cec_adapter *adap,
 	mutex_lock(&adap->lock);
 	dprintk(2, "%s: %*ph\n", __func__, msg->len, msg->msg);
 
-	adap->last_initiator = 0xff;
+	if (!adap->transmit_in_progress)
+		adap->last_initiator = 0xff;
 
 	/* Check if this message was for us (directed or broadcast). */
 	if (!cec_msg_is_broadcast(msg))
-- 
2.39.2

[PATCH AUTOSEL 5.4 7/8] nfcsim.c: Fix error checking for debugfs_create_dir

[Sasha Levin]

From: Osama Muhammad <osmtendev@gmail.com>

[ Upstream commit 9b9e46aa07273ceb96866b2e812b46f1ee0b8d2f ]

This patch fixes the error checking in nfcsim.c.
The DebugFS kernel API is developed in
a way that the caller can safely ignore the errors that
occur during the creation of DebugFS nodes.

Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nfc/nfcsim.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/nfc/nfcsim.c b/drivers/nfc/nfcsim.c
index dd27c85190d34..b42d386350b72 100644
--- a/drivers/nfc/nfcsim.c
+++ b/drivers/nfc/nfcsim.c
@@ -336,10 +336,6 @@ static struct dentry *nfcsim_debugfs_root;
 static void nfcsim_debugfs_init(void)
 {
 	nfcsim_debugfs_root = debugfs_create_dir("nfcsim", NULL);
-
-	if (!nfcsim_debugfs_root)
-		pr_err("Could not create debugfs entry\n");
-
 }
 
 static void nfcsim_debugfs_remove(void)
-- 
2.39.2

[PATCH AUTOSEL 5.4 8/8] usb: gadget: udc: fix NULL dereference in remove()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@linaro.org>

[ Upstream commit 016da9c65fec9f0e78c4909ed9a0f2d567af6775 ]

The "udc" pointer was never set in the probe() function so it will
lead to a NULL dereference in udc_pci_remove() when we do:

	usb_del_gadget_udc(&udc->gadget);

Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/ZG+A/dNpFWAlCChk@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/amd5536udc_pci.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/usb/gadget/udc/amd5536udc_pci.c b/drivers/usb/gadget/udc/amd5536udc_pci.c
index 362284057d307..a3d15c3fb82a9 100644
--- a/drivers/usb/gadget/udc/amd5536udc_pci.c
+++ b/drivers/usb/gadget/udc/amd5536udc_pci.c
@@ -171,6 +171,9 @@ static int udc_pci_probe(
 		retval = -ENODEV;
 		goto err_probe;
 	}
+
+	udc = dev;
+
 	return 0;
 
 err_probe:
-- 
2.39.2