stable.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	patches@lists.linux.dev, Jerry Meng <jerry-meng@foxmail.com>,
	Johan Hovold <johan@kernel.org>
Subject: [PATCH 4.19 23/49] USB: serial: option: add Quectel EM061KGL series
Date: Mon, 19 Jun 2023 12:30:01 +0200	[thread overview]
Message-ID: <20230619102131.081677935@linuxfoundation.org> (raw)
In-Reply-To: <20230619102129.856988902@linuxfoundation.org>

From: Jerry Meng <jerry-meng@foxmail.com>

commit f1832e2b5e498e258b090af3b065b85cf8cc5161 upstream.

Add support for Quectel EM061KGL series which are based on Qualcomm
SDX12 chip:

EM061KGL_LTA(0x2c7c / 0x0123): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL
EM061KGL_LMS(0x2c7c / 0x0124): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL
EM061KGL_LWW(0x2c7c / 0x6008): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL
EM061KGL_LCN(0x2c7c / 0x6009): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL

Above products use the exact same interface layout and
option driver is for interfaces DIAG, NMEA and AT.

T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  5 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=6008 Rev= 5.04
S:  Manufacturer=Quectel
S:  Product=Quectel EM061K-GL
S:  SerialNumber=f6fa08b6
C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E:  Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Jerry Meng <jerry-meng@foxmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -248,6 +248,8 @@ static void option_instat_callback(struc
 #define QUECTEL_VENDOR_ID			0x2c7c
 /* These Quectel products use Quectel's vendor ID */
 #define QUECTEL_PRODUCT_EC21			0x0121
+#define QUECTEL_PRODUCT_EM061K_LTA		0x0123
+#define QUECTEL_PRODUCT_EM061K_LMS		0x0124
 #define QUECTEL_PRODUCT_EC25			0x0125
 #define QUECTEL_PRODUCT_EG91			0x0191
 #define QUECTEL_PRODUCT_EG95			0x0195
@@ -266,6 +268,8 @@ static void option_instat_callback(struc
 #define QUECTEL_PRODUCT_RM520N			0x0801
 #define QUECTEL_PRODUCT_EC200U			0x0901
 #define QUECTEL_PRODUCT_EC200S_CN		0x6002
+#define QUECTEL_PRODUCT_EM061K_LWW		0x6008
+#define QUECTEL_PRODUCT_EM061K_LCN		0x6009
 #define QUECTEL_PRODUCT_EC200T			0x6026
 #define QUECTEL_PRODUCT_RM500K			0x7001
 
@@ -1189,6 +1193,18 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0x00, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x30) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LMS, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LMS, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LMS, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LTA, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LTA, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LTA, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LWW, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LWW, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LWW, 0xff, 0xff, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff),
 	  .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) },



  parent reply	other threads:[~2023-06-19 10:42 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-19 10:29 [PATCH 4.19 00/49] 4.19.287-rc1 review Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 01/49] power: supply: ab8500: Fix external_power_changed race Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 02/49] power: supply: bq27xxx: Use mod_delayed_work() instead of cancel() + schedule() Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 03/49] ARM: dts: vexpress: add missing cache properties Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 04/49] power: supply: Ratelimit no data debug output Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 05/49] regulator: Fix error checking for debugfs_create_dir Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 06/49] irqchip/meson-gpio: Mark OF related data as maybe unused Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 07/49] power: supply: Fix logic checking if system is running from battery Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 08/49] parisc: Improve cache flushing for PCXL in arch_sync_dma_for_cpu() Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 09/49] MIPS: Alchemy: fix dbdma2 Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 10/49] mips: Move initrd_start check after initrd address sanitisation Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 11/49] xen/blkfront: Only check REQ_FUA for writes Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 12/49] ocfs2: fix use-after-free when unmounting read-only filesystem Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 13/49] ocfs2: check new file size on fallocate call Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 14/49] nios2: dts: Fix tse_mac "max-frame-size" property Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 15/49] nilfs2: fix incomplete buffer cleanup in nilfs_btnode_abort_change_key() Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 16/49] nilfs2: fix possible out-of-bounds segment allocation in resize ioctl Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 17/49] kexec: support purgatories with .text.hot sections Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 18/49] powerpc/purgatory: remove PGO flags Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 19/49] nouveau: fix client work fence deletion race Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 20/49] RDMA/uverbs: Restrict usage of privileged QKEYs Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 21/49] net: usb: qmi_wwan: add support for Compal RXM-G1 Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 22/49] Remove DECnet support from kernel Greg Kroah-Hartman
2023-06-19 10:30 ` Greg Kroah-Hartman [this message]
2023-06-19 10:30 ` [PATCH 4.19 24/49] usb: dwc3: gadget: Reset num TRBs before giving back the request Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 25/49] usb: gadget: f_ncm: Add OS descriptor support Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 26/49] usb: gadget: f_ncm: Fix NTP-32 support Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 27/49] netfilter: nfnetlink: skip error delivery on batch in case of ENOMEM Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 28/49] ping6: Fix send to link-local addresses with VRF Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 29/49] RDMA/rxe: Remove the unused variable obj Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 30/49] RDMA/rxe: Removed unused name from rxe_task struct Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 31/49] RDMA/rxe: Fix the use-before-initialization error of resp_pkts Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 32/49] IB/uverbs: Fix to consider event queue closing also upon non-blocking mode Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 33/49] IB/isert: Fix dead lock in ib_isert Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 34/49] IB/isert: Fix possible list corruption in CMA handler Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 35/49] IB/isert: Fix incorrect release of isert connection Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 36/49] sctp: fix an error code in sctp_sf_eat_auth() Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 37/49] igb: fix nvm.ops.read() error handling Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 38/49] drm/nouveau/dp: check for NULL nv_connector->native_mode Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 39/49] drm/nouveau/kms: Dont change EDID when it hasnt actually changed Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 40/49] drm/nouveau: add nv_encoder pointer check for NULL Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 41/49] net: lapbether: only support ethernet devices Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 42/49] net: tipc: resize nlattr array to correct size Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 43/49] selftests/ptp: Fix timestamp printf format for PTP_SYS_OFFSET Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 44/49] neighbour: Remove unused inline function neigh_key_eq16() Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 45/49] net: Remove unused inline function dst_hold_and_use() Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 46/49] neighbour: delete neigh_lookup_nodev as not used Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 47/49] drm/nouveau/kms: Fix NULL pointer dereference in nouveau_connector_detect_depth Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 48/49] powerpc: Fix defconfig choice logic when cross compiling Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 49/49] mmc: block: ensure error propagation for non-blk Greg Kroah-Hartman
2023-06-20  9:19 ` [PATCH 4.19 00/49] 4.19.287-rc1 review Chris Paterson
2023-06-20 10:21 ` Jon Hunter
2023-06-20 10:46 ` Sudip Mukherjee (Codethink)
2023-06-20 11:04 ` Naresh Kamboju
2023-06-20 21:05 ` Shuah Khan
2023-06-21  0:37 ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230619102131.081677935@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=jerry-meng@foxmail.com \
    --cc=johan@kernel.org \
    --cc=patches@lists.linux.dev \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).