[PATCH 6.1 000/228] 6.1.43-rc1 review

[PATCH 6.1 000/228] 6.1.43-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 6.1.43 release.
There are 228 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu, 03 Aug 2023 09:18:38 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.43-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 6.1.43-rc1

Dan Carpenter <dan.carpenter@linaro.org>
    dma-buf: fix an error pointer vs NULL bug

Christian König <christian.koenig@amd.com>
    dma-buf: keep the signaling time of merged fences v3

Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
    test_firmware: return ENOMEM instead of ENOSPC on failed memory allocation

Matthieu Baerts <matthieu.baerts@tessares.net>
    selftests: mptcp: sockopt: use 'iptables-legacy' if available

Paolo Abeni <pabeni@redhat.com>
    mptcp: ensure subflow is unhashed before cleaning the backlog

Rafael J. Wysocki <rafael.j.wysocki@intel.com>
    cpufreq: intel_pstate: Drop ACPI _PSS states table patching

Rafael J. Wysocki <rafael.j.wysocki@intel.com>
    ACPI: processor: perflib: Avoid updating frequency QoS unnecessarily

Rafael J. Wysocki <rafael.j.wysocki@intel.com>
    ACPI: processor: perflib: Use the "no limit" frequency QoS

Benjamin Cheng <ben@bcheng.me>
    drm/amd/display: Write to correct dirty_rect

Hamza Mahfooz <hamza.mahfooz@amd.com>
    drm/amd/display: perform a bounds check before filling dirty rectangles

Steven Rostedt (Google) <rostedt@goodmis.org>
    tracing: Fix trace_event_raw_event_synth() if else statement

Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
    drm/amd/display: set per pipe dppclk to 0 when dpp is off

Ilya Dryomov <idryomov@gmail.com>
    rbd: retrieve and check lock owner twice before blocklisting

Ilya Dryomov <idryomov@gmail.com>
    rbd: harden get_lock_owner_info() a bit

Ilya Dryomov <idryomov@gmail.com>
    rbd: make get_lock_owner_info() return a single locker or NULL

Joe Thornber <ejt@redhat.com>
    dm cache policy smq: ensure IO doesn't prevent cleaner policy progress

Radhakrishna Sripada <radhakrishna.sripada@intel.com>
    drm/i915/dpt: Use shmem for dpt objects

Xiubo Li <xiubli@redhat.com>
    ceph: never send metrics if disable_send_metrics is set

Johan Hovold <johan+linaro@kernel.org>
    PM: sleep: wakeirq: fix wake irq arming

Mark Brown <broonie@kernel.org>
    arm64/sme: Set new vector length before reallocating

Mark Brown <broonie@kernel.org>
    ASoC: wm8904: Fill the cache for WM8904_ADC_TEST_0 register

Stefan Haberland <sth@linux.ibm.com>
    s390/dasd: print copy pair message only for the correct error

Stefan Haberland <sth@linux.ibm.com>
    s390/dasd: fix hanging device after quiesce/resume

Chenguang Zhao <zhaochenguang@kylinos.cn>
    LoongArch: BPF: Enable bpf_probe_read{, str}() on LoongArch

Tiezhu Yang <yangtiezhu@loongson.cn>
    LoongArch: BPF: Fix check condition to call lu32id in move_imm()

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    Revert "um: Use swap() to make code cleaner"

Johan Hovold <johan+linaro@kernel.org>
    soundwire: fix enumeration completion

Matthieu Baerts <matthieu.baerts@tessares.net>
    selftests: mptcp: join: only check for ip6tables if needed

Sean Christopherson <seanjc@google.com>
    selftests/rseq: Play nice with binaries statically linked against glibc 2.35+

Christian Marangi <ansuelsmth@gmail.com>
    net: dsa: qca8k: fix mdb add/del case with 0 VID

Christian Marangi <ansuelsmth@gmail.com>
    net: dsa: qca8k: fix broken search_and_del

Christian Marangi <ansuelsmth@gmail.com>
    net: dsa: qca8k: fix search_and_insert wrong handling of new rule

Jason Wang <jasowang@redhat.com>
    virtio-net: fix race between set queues and probe

Demi Marie Obenour <demi@invisiblethingslab.com>
    xen: speed up grant-table reclaim

Dan Carpenter <dan.carpenter@linaro.org>
    proc/vmcore: fix signedness bug in read_from_oldmem()

Peter Zijlstra <peterz@infradead.org>
    locking/rtmutex: Fix task->pi_waiters integrity

Marc Zyngier <maz@kernel.org>
    irqchip/gic-v4.1: Properly lock VPEs when doing a directLPI invalidation

Jonas Gorski <jonas.gorski@gmail.com>
    irq-bcm6345-l1: Do not assume a fixed block to cpu mapping

Alexander Steffen <Alexander.Steffen@infineon.com>
    tpm_tis: Explicitly check for error code

Guanghui Feng <guanghuifeng@linux.alibaba.com>
    ACPI/IORT: Remove erroneous id_count check in iort_node_get_rmr_info()

Trond Myklebust <trond.myklebust@hammerspace.com>
    nfsd: Remove incorrect check in nfsd4_validate_stateid

Christian Brauner <brauner@kernel.org>
    file: always lock position for FMODE_ATOMIC_POS

Yazen Ghannam <yazen.ghannam@amd.com>
    x86/MCE/AMD: Decrement threshold_bank refcount when removing threshold blocks

Filipe Manana <fdmanana@suse.com>
    btrfs: check for commit error at btrfs_attach_transaction_barrier()

Filipe Manana <fdmanana@suse.com>
    btrfs: check if the transaction was aborted at btrfs_wait_for_commit()

Filipe Manana <fdmanana@suse.com>
    btrfs: account block group tree when calculating global reserve size

Gilles Buloz <Gilles.Buloz@kontron.com>
    hwmon: (nct7802) Fix for temp6 (PECI1) processed even if PECI1 disabled

Baskaran Kannan <Baski.Kannan@amd.com>
    hwmon: (k10temp) Enable AMD3255 Proc to show negative temperature

Luka Guzenko <l.guzenko@web.de>
    ALSA: hda/relatek: Enable Mute LED on HP 250 G8

Pavel Asyutchenko <svenpavel@gmail.com>
    ALSA: hda/realtek: Support ASUS G713PV laptop

Oliver Neukum <oneukum@suse.com>
    Revert "xhci: add quirk for host controllers that don't update endpoint DCS"

Chaoyuan Peng <hedonistsmith@gmail.com>
    tty: n_gsm: fix UAF in gsm_cleanup_mux

Zhang Shurong <zhang_shurong@foxmail.com>
    staging: ks7010: potential buffer overflow in ks_wlan_set_encode_ext()

Larry Finger <Larry.Finger@lwfinger.net>
    staging: r8712: Fix memory leak in _r8712_init_xmit_priv()

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Documentation: security-bugs.rst: clarify CVE handling

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Documentation: security-bugs.rst: update preferences when dealing with the linux-distros group

Dan Carpenter <dan.carpenter@linaro.org>
    Revert "usb: xhci: tegra: Fix error check"

Ricardo Ribalda <ribalda@chromium.org>
    usb: xhci-mtk: set the dma max_seg_size

Frank Li <Frank.Li@nxp.com>
    usb: cdns3: fix incorrect calculation of ep_buf_size when more than one config

Łukasz Bartosik <lb@semihalf.com>
    USB: quirks: add quirk for Focusrite Scarlett

Guiting Shen <aarongt.shen@gmail.com>
    usb: ohci-at91: Fix the unhandle interrupt when resume

Xu Yang <xu.yang_2@nxp.com>
    usb: misc: ehset: fix wrong if condition

Jisheng Zhang <jszhang@kernel.org>
    usb: dwc3: don't reset device side if dwc3 was configured as host-only

Gratian Crisan <gratian.crisan@ni.com>
    usb: dwc3: pci: skip BYT GPIO lookup table for hardwired phy

Jakub Vanek <linuxtardis@gmail.com>
    Revert "usb: dwc3: core: Enable AutoRetry feature in the controller"

Kyle Tso <kyletso@google.com>
    usb: typec: Use sysfs_emit_at when concatenating the string

Kyle Tso <kyletso@google.com>
    usb: typec: Iterate pds array when showing the pd list

Kyle Tso <kyletso@google.com>
    usb: typec: Set port->pd before adding device for typec_port

Marc Kleine-Budde <mkl@pengutronix.de>
    can: gs_usb: gs_can_close(): add missing set of CAN state to CAN_STATE_STOPPED

Johan Hovold <johan@kernel.org>
    USB: serial: simple: sort driver entries

Oliver Neukum <oneukum@suse.com>
    USB: serial: simple: add Kaufmann RKS+CAN VCP

Mohsen Tahmasebi <moh53n@moh53n.ir>
    USB: serial: option: add Quectel EC200A module support

Jerry Meng <jerry-meng@foxmail.com>
    USB: serial: option: support Quectel EM060K_128

Samuel Holland <samuel.holland@sifive.com>
    serial: sifive: Fix sifive_serial_console_setup() section

Ruihong Luo <colorsu1922@gmail.com>
    serial: 8250_dw: Preserve original value of DLF register

Johan Hovold <johan+linaro@kernel.org>
    serial: qcom-geni: drop bogus runtime pm state update

Sean Christopherson <seanjc@google.com>
    KVM: x86: Disallow KVM_SET_SREGS{2} if incoming CR0 is invalid

Sean Christopherson <seanjc@google.com>
    KVM: VMX: Don't fudge CR0 and CR4 for restricted L2 guest

Sean Christopherson <seanjc@google.com>
    KVM: Grab a reference to KVM for VM and vCPU stats file descriptors

Michael Grzeschik <m.grzeschik@pengutronix.de>
    usb: gadget: core: remove unbalanced mutex_unlock in usb_gadget_activate

Zqiang <qiang.zhang1211@gmail.com>
    USB: gadget: Fix the memory leak in raw_gadget driver

Frank Li <Frank.Li@nxp.com>
    usb: gadget: call usb_gadget_check_config() to verify UDC capability

Dan Carpenter <dan.carpenter@linaro.org>
    Revert "usb: gadget: tegra-xudc: Fix error check in tegra_xudc_powerdomain_init()"

Zheng Yejian <zhengyejian1@huawei.com>
    tracing: Fix warning in trace_buffered_event_disable()

Zheng Yejian <zhengyejian1@huawei.com>
    ring-buffer: Fix wrong stat of cpu_buffer->read

Arnd Bergmann <arnd@arndb.de>
    ata: pata_ns87415: mark ns87560_tf_read static

Ming Lei <ming.lei@redhat.com>
    ublk: fail to recover device if queue setup is interrupted

Ming Lei <ming.lei@redhat.com>
    ublk: fail to start device if queue setup is interrupted

Ming Lei <ming.lei@redhat.com>
    ublk_drv: move ublk_get_device_from_id into ublk_ctrl_uring_cmd

Rob Clark <robdclark@chromium.org>
    drm/msm: Disallow submit with fence id 0

Rob Clark <robdclark@chromium.org>
    drm/msm: Switch idr_lock to spinlock

Sindhu Devale <sindhu.devale@intel.com>
    RDMA/irdma: Report correct WC error

Sindhu Devale <sindhu.devale@intel.com>
    RDMA/irdma: Fix op_type reporting in CQEs

Dan Carpenter <dan.carpenter@linaro.org>
    drm/amd/display: Unlock on error path in dm_handle_mst_sideband_msg_ready_event()

Mario Limonciello <mario.limonciello@amd.com>
    drm/amd: Fix an error handling mistake in psp_sw_init()

Yu Kuai <yukuai3@huawei.com>
    dm raid: protect md_stop() with 'reconfig_mutex'

Yu Kuai <yukuai3@huawei.com>
    dm raid: clean up four equivalent goto tags in raid_ctr()

Yu Kuai <yukuai3@huawei.com>
    dm raid: fix missing reconfig_mutex unlock in raid_ctr() error paths

Stefano Stabellini <sstabellini@kernel.org>
    xenbus: check xen_domain in xenbus_probe_initcall

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    drm/i915: Fix an error handling path in igt_write_huge()

Steve French <stfrench@microsoft.com>
    smb3: do not set NTLMSSP_VERSION flag for negotiate not auth request

Bart Van Assche <bvanassche@acm.org>
    block: Fix a source code comment in include/uapi/linux/blkzoned.h

Matus Gajdos <matuszpd@gmail.com>
    ASoC: fsl_spdif: Silence output on stop

Breno Leitao <leitao@debian.org>
    cxl/acpi: Return 'rc' instead of '0' in cxl_parse_cfmws()

Breno Leitao <leitao@debian.org>
    cxl/acpi: Fix a use-after-free in cxl_parse_cfmws()

Gaosheng Cui <cuigaosheng1@huawei.com>
    drm/msm: Fix IS_ERR_OR_NULL() vs NULL check in a5xx_submit_in_rb()

Kashyap Desai <kashyap.desai@broadcom.com>
    RDMA/bnxt_re: Prevent handling any completions after qp destroy

Thomas Bogendoerfer <tbogendoerfer@suse.de>
    RDMA/mthca: Fix crash when polling CQ for shared QPs

Shiraz Saleem <shiraz.saleem@intel.com>
    RDMA/irdma: Fix data race on CQP request done

Shiraz Saleem <shiraz.saleem@intel.com>
    RDMA/irdma: Fix data race on CQP completion stats

Shiraz Saleem <shiraz.saleem@intel.com>
    RDMA/irdma: Add missing read barriers

Rob Clark <robdclark@chromium.org>
    drm/msm/adreno: Fix snapshot BINDLESS_DATA size

Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
    drm/msm/dpu: drop enum dpu_core_perf_data_bus_id

Dan Carpenter <dan.carpenter@linaro.org>
    RDMA/mlx4: Make check for invalid flags stricter

Fedor Pchelkin <pchelkin@ispras.ru>
    tipc: stop tipc crypto on failure in tipc_node_create

Yuanjun Gong <ruc_gongyuanjun@163.com>
    tipc: check return value of pskb_trim()

Yuanjun Gong <ruc_gongyuanjun@163.com>
    benet: fix return value check in be_lancer_xmit_workarounds()

Lin Ma <linma@zju.edu.cn>
    net/sched: mqprio: Add length check for TCA_MQPRIO_{MAX/MIN}_RATE64

Vladimir Oltean <vladimir.oltean@nxp.com>
    net/sched: mqprio: add extack to mqprio_parse_nlattr()

Vladimir Oltean <vladimir.oltean@nxp.com>
    net/sched: mqprio: refactor nlattr parsing to a separate function

Linus Torvalds <torvalds@linux-foundation.org>
    mm: suppress mm fault logging if fatal signal already pending

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_tables: disallow rule addition to bound chain via NFTA_RULE_CHAIN_ID

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_tables: skip immediate deactivate in _PREPARE_ERROR

Florian Westphal <fw@strlen.de>
    netfilter: nft_set_rbtree: fix overlap expiration walk

Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
    igc: Fix Kernel Panic during ndo_tx_timeout callback

Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
    x86/traps: Fix load_unaligned_zeropad() handling for shared TDX memory

Maxim Mikityanskiy <maxtram95@gmail.com>
    platform/x86: msi-laptop: Fix rfkill out-of-sync on MSI Wind U100

Vincent Whitchurch <vincent.whitchurch@axis.com>
    net: stmmac: Apply redundant write work around on 4.xx too

Suman Ghosh <sumang@marvell.com>
    octeontx2-af: Fix hash extraction enable configuration

Sunil Goutham <sgoutham@marvell.com>
    octeontx2-af: Removed unnecessary debug messages.

Hangbin Liu <liuhangbin@gmail.com>
    team: reset team's flags when down link is P2P device

Hangbin Liu <liuhangbin@gmail.com>
    bonding: reset bond's flags when down link is P2P device

Jedrzej Jagielski <jedrzej.jagielski@intel.com>
    ice: Fix memory management in ice_ethtool_fdir.c

Stewart Smith <trawets@amazon.com>
    tcp: Reduce chance of collisions in inet6_hashfn().

Maciej Żenczykowski <maze@google.com>
    ipv6 addrconf: fix bug where deleting a mngtmpaddr can create a new temporary address

Yuanjun Gong <ruc_gongyuanjun@163.com>
    ethernet: atheros: fix return value check in atl1e_tso_csum()

Yuanjun Gong <ruc_gongyuanjun@163.com>
    atheros: fix return value check in atl1_tso()

Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
    phy: hisilicon: Fix an out of bounds check in hisi_inno_phy_probe()

Jiri Benc <jbenc@redhat.com>
    vxlan: fix GRO with VXLAN-GPE

Jiri Benc <jbenc@redhat.com>
    vxlan: generalize vxlan_parse_gpe_hdr and remove unused args

Jiri Benc <jbenc@redhat.com>
    vxlan: calculate correct header length for GPE

Jijie Shao <shaojijie@huawei.com>
    net: hns3: fix wrong bw weight of disabled tc issue

Jijie Shao <shaojijie@huawei.com>
    net: hns3: fix wrong tc bandwidth weight data issue

Hao Lan <lanhao@huawei.com>
    net: hns3: fix the imp capability bit cannot exceed 32 bits issue

Jiawen Wu <jiawenwu@trustnetic.com>
    net: phy: marvell10g: fix 88x3310 power up

Jacob Keller <jacob.e.keller@intel.com>
    iavf: check for removal state before IAVF_FLAG_PF_COMMS_FAILED

Jacob Keller <jacob.e.keller@intel.com>
    iavf: fix potential deadlock on allocation failure

Wang Ming <machel@vivo.com>
    i40e: Fix an NULL vs IS_ERR() bug for debugfs_create_dir()

Nicolas Dufresne <nicolas.dufresne@collabora.com>
    media: amphion: Fix firmware path to match linux-firmware

Sakari Ailus <sakari.ailus@linux.intel.com>
    media: staging: atomisp: select V4L2_FWNODE

Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
    soundwire: qcom: update status correctly with mask

Adrien Thierry <athierry@redhat.com>
    phy: qcom-snps-femto-v2: properly enable ref clock

Adrien Thierry <athierry@redhat.com>
    phy: qcom-snps-femto-v2: keep cfg_ahb_clk enabled during runtime suspend

Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
    phy: qcom-snps: correct struct qcom_snps_hsphy kerneldoc

Dan Carpenter <dan.carpenter@linaro.org>
    phy: phy-mtk-dp: Fix an error code in probe()

Zhang Yi <yi.zhang@huawei.com>
    jbd2: fix a race when checking checkpoint buffer busy

Zhang Yi <yi.zhang@huawei.com>
    jbd2: remove journal_clean_one_cp_list()

Zhang Yi <yi.zhang@huawei.com>
    jbd2: remove t_checkpoint_io_list

Daniel Miess <daniel.miess@amd.com>
    drm/amd/display: Prevent vtotal from being set to 0

Daniel Miess <daniel.miess@amd.com>
    drm/amd/display: Fix possible underflow for displays with large vblank

Gabe Teeger <gabe.teeger@amd.com>
    drm/amd/display: update extended blank for dcn314 onwards

Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
    drm/amd/display: Add FAMS validation before trying to use it

Randy Dunlap <rdunlap@infradead.org>
    drm/amd/display: fix dc/core/dc.c kernel-doc

Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
    drm/amd/display: Rework comments on dc file

Liam R. Howlett <Liam.Howlett@oracle.com>
    maple_tree: fix 32 bit mas_next testing

Liam R. Howlett <Liam.Howlett@oracle.com>
    maple_tree: add __init and __exit to test module

Liam R. Howlett <Liam.Howlett@Oracle.com>
    test_maple_tree: test modifications while iterating

Masami Hiramatsu (Google) <mhiramat@kernel.org>
    tracing/probes: Fix to record 0-length data_loc in fetch_store_string*() if fails

Masami Hiramatsu (Google) <mhiramat@kernel.org>
    Revert "tracing: Add "(fault)" name injection to kernel probes"

Steven Rostedt (Google) <rostedt@goodmis.org>
    tracing: Allow synthetic events to pass around stacktraces

Masami Hiramatsu (Google) <mhiramat@kernel.org>
    tracing/probes: Fix to avoid double count of the string length on the array

Masami Hiramatsu (Google) <mhiramat@kernel.org>
    tracing/probes: Add symstr type for dynamic events

Paolo Abeni <pabeni@redhat.com>
    mptcp: do not rely on implicit state check in mptcp_listen()

Menglong Dong <imagedong@tencent.com>
    mptcp: introduce 'sk' to replace 'sock->sk' in mptcp_listen()

Oliver Upton <oliver.upton@linux.dev>
    arm64: errata: Mitigate Ampere1 erratum AC03_CPU_38 at stage-2

Oliver Upton <oliver.upton@linux.dev>
    KVM: arm64: Condition HW AF updates on config option

Christian König <christian.koenig@amd.com>
    drm/ttm: never consider pinned BOs for eviction&swap

Hui Li <caelli@tencent.com>
    tty: fix hang on tty device with no_room set

Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
    n_tty: Rename tail to old_tail in n_tty_read()

Thomas Hellström <thomas.hellstrom@linux.intel.com>
    drm/ttm: Don't leak a resource on eviction error

Thomas Hellström <thomas.hellstrom@linux.intel.com>
    drm/ttm: Don't print error message if eviction was interrupted

Mario Limonciello <mario.limonciello@amd.com>
    drm/amd/display: Set minimum requirement for using PSR-SU on Phoenix

Mario Limonciello <mario.limonciello@amd.com>
    drm/amd/display: Set minimum requirement for using PSR-SU on Rembrandt

Cruise Hung <cruise.hung@amd.com>
    drm/amd/display: Update correct DCN314 register header

Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
    drm/amd/display: fix dcn315 single stream crb allocation

Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
    drm/amd/display: add pixel rate based CRB allocation support

Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
    drm/amd/display: fix unbounded requesting for high pixel rate modes on dcn315

Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
    drm/amd/display: use low clocks for no plane configs

Samson Tam <samson.tam@amd.com>
    drm/amd/display: add ODM case when looking for first split pipe

Alvin Lee <Alvin.Lee2@amd.com>
    drm/amd/display: Use min transition for all SubVP plane add/remove

Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
    drm/amd/display: Include surface of unaffected streams

Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
    drm/amd/display: Copy DC context in the commit streams

Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
    drm/amd/display: Enable new commit sequence only for DCN32x

Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
    drm/amd/display: Rework context change check

Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
    drm/amd/display: Check if link state is valid

Hamza Mahfooz <hamza.mahfooz@amd.com>
    drm/amd/display: add FB_DAMAGE_CLIPS support

Rick Wertenbroek <rick.wertenbroek@gmail.com>
    PCI: rockchip: Don't advertise MSI-X in PCIe capabilities

Rick Wertenbroek <rick.wertenbroek@gmail.com>
    PCI: rockchip: Fix window mapping and address translation for endpoint

Rick Wertenbroek <rick.wertenbroek@gmail.com>
    PCI: rockchip: Remove writes to unused registers

Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
    PCI/ASPM: Avoid link retraining race

Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
    PCI/ASPM: Factor out pcie_wait_for_retrain()

Bjorn Helgaas <bhelgaas@google.com>
    PCI/ASPM: Return 0 or -ETIMEDOUT from pcie_retrain_link()

Huacai Chen <chenhuacai@kernel.org>
    MIPS: Loongson: Fix build error when make modules_install

Jiaxun Yang <jiaxun.yang@flygoat.com>
    MIPS: Loongson: Move arch cflags to MIPS top level Makefile

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    i2c: nomadik: Remove a useless call in the remove function

Andi Shyti <andi.shyti@kernel.org>
    i2c: nomadik: Use devm_clk_get_enabled()

Andi Shyti <andi.shyti@kernel.org>
    i2c: nomadik: Remove unnecessary goto label

Markus Elfring <elfring@users.sourceforge.net>
    i2c: Improve size determinations

Markus Elfring <elfring@users.sourceforge.net>
    i2c: Delete error messages for failed memory allocations

Chao Yu <chao@kernel.org>
    f2fs: don't reset unchangable mount option in f2fs_remount()

Yangtao Li <frank.li@vivo.com>
    f2fs: fix to set flush_merge opt and show noflush_merge

Filipe Manana <fdmanana@suse.com>
    btrfs: fix race between quota disable and relocation

Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
    gpio: mvebu: fix irq domain leak

Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    gpio: mvebu: Make use of devm_pwmchip_add

Hans de Goede <hdegoede@redhat.com>
    gpio: tps68470: Make tps68470_gpio_output() always set the initial value

Ondrej Mosnacek <omosnace@redhat.com>
    io_uring: don't audit the capability check in io_uring_create()

Claudio Imbrenda <imbrenda@linux.ibm.com>
    KVM: s390: pv: fix index value of replaced ASCE

Haren Myneni <haren@linux.ibm.com>
    powerpc/pseries/vas: Hold mmap_mutex after mmap lock during window close

Ross Lagerwall <ross.lagerwall@citrix.com>
    blk-mq: Fix stall due to recursive flush plug

Zhihao Cheng <chengzhihao1@huawei.com>
    jbd2: Fix wrongly judgement for buffer head removing while doing checkpoint

Mario Limonciello <mario.limonciello@amd.com>
    drm/amd: Align SMU11 SMU_MSG_OverridePcieParameters implementation with SMU13

Mario Limonciello <mario.limonciello@amd.com>
    drm/amd: Move helper for dynamic speed switch check out of smu13

Zhihao Cheng <chengzhihao1@huawei.com>
    ovl: fix null pointer dereference in ovl_permission()

Agustin Gutierrez <agustin.gutierrez@amd.com>
    drm/amd/display: Keep PHY active for dp config

Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
    platform/x86/amd/pmf: reduce verbosity of apmf_get_system_params

Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
    platform/x86/amd/pmf: Notify OS power slider update

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_tables: fix underflow in chain reference counter

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_tables: fix underflow in object reference counter


-------------

Diffstat:

 Documentation/ABI/testing/sysfs-module             |  11 +
 Documentation/admin-guide/security-bugs.rst        |  37 +--
 Documentation/arm64/silicon-errata.rst             |   3 +
 Documentation/trace/kprobetrace.rst                |   8 +-
 Makefile                                           |   4 +-
 arch/arm64/Kconfig                                 |  19 ++
 arch/arm64/kernel/cpu_errata.c                     |   7 +
 arch/arm64/kernel/fpsimd.c                         |   4 +-
 arch/arm64/kvm/hyp/pgtable.c                       |  16 +-
 arch/arm64/tools/cpucaps                           |   1 +
 arch/loongarch/Kconfig                             |   1 +
 arch/loongarch/net/bpf_jit.h                       |   2 +-
 arch/mips/Makefile                                 |  34 ++
 arch/mips/loongson2ef/Platform                     |  35 ---
 arch/mips/loongson64/Platform                      |  16 -
 arch/powerpc/platforms/pseries/vas.c               |   9 +-
 arch/s390/mm/gmap.c                                |   1 +
 arch/um/os-Linux/sigio.c                           |   7 +-
 arch/x86/include/asm/kvm-x86-ops.h                 |   1 +
 arch/x86/include/asm/kvm_host.h                    |   3 +-
 arch/x86/kernel/cpu/mce/amd.c                      |   4 +-
 arch/x86/kernel/traps.c                            |  18 +-
 arch/x86/kvm/svm/svm.c                             |   6 +
 arch/x86/kvm/vmx/vmx.c                             |  41 ++-
 arch/x86/kvm/x86.c                                 |  34 +-
 block/blk-core.c                                   |   3 +-
 block/blk-mq.c                                     |   9 +-
 drivers/acpi/arm64/iort.c                          |   3 -
 drivers/acpi/processor_perflib.c                   |  42 ++-
 drivers/ata/pata_ns87415.c                         |   2 +-
 drivers/base/power/power.h                         |   1 +
 drivers/base/power/wakeirq.c                       |  12 +-
 drivers/block/rbd.c                                | 124 +++++---
 drivers/block/ublk_drv.c                           | 145 ++++-----
 drivers/char/tpm/tpm_tis_core.c                    |   9 +-
 drivers/cpufreq/intel_pstate.c                     |  14 -
 drivers/cxl/acpi.c                                 |   5 +-
 drivers/dma-buf/dma-fence-unwrap.c                 |  26 +-
 drivers/dma-buf/dma-fence.c                        |   7 +-
 drivers/gpio/gpio-mvebu.c                          |  26 +-
 drivers/gpio/gpio-tps68470.c                       |   6 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu.h                |   1 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c         |  19 ++
 drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c            |   6 +-
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c  | 121 ++++---
 .../amd/display/amdgpu_dm/amdgpu_dm_mst_types.c    |   2 +-
 .../drm/amd/display/amdgpu_dm/amdgpu_dm_plane.c    |   4 +
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c  |   3 +-
 .../amd/display/dc/clk_mgr/dcn314/dcn314_clk_mgr.c |   5 +
 drivers/gpu/drm/amd/display/dc/core/dc.c           | 348 +++++++++++++--------
 drivers/gpu/drm/amd/display/dc/core/dc_resource.c  |  20 ++
 drivers/gpu/drm/amd/display/dc/dc.h                |  64 ++--
 drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c       |   7 +
 drivers/gpu/drm/amd/display/dc/dc_dmub_srv.h       |   1 +
 drivers/gpu/drm/amd/display/dc/dc_stream.h         |   5 +
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c |   4 +-
 drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c  |   7 +-
 .../gpu/drm/amd/display/dc/dcn31/dcn31_hubbub.c    |   1 +
 .../drm/amd/display/dc/dcn315/dcn315_resource.c    | 110 ++++++-
 .../gpu/drm/amd/display/dc/dml/dcn20/dcn20_fpu.c   |  23 +-
 .../gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c   |  49 ++-
 .../gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.h   |   4 +
 .../amd/display/dc/dml/dcn31/display_mode_vba_31.c |  39 ++-
 .../display/dc/dml/dcn31/display_rq_dlg_calc_31.c  |   3 +-
 .../gpu/drm/amd/display/dc/dml/dcn314/dcn314_fpu.c |  15 +-
 .../dc/dml/dcn314/display_rq_dlg_calc_314.c        |  16 +-
 .../gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c   |  19 +-
 .../drm/amd/display/dc/dml/display_mode_structs.h  |   3 +-
 .../gpu/drm/amd/display/dc/dml/display_mode_vba.c  |   6 +
 drivers/gpu/drm/amd/display/dmub/dmub_srv.h        |   2 +
 drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h    |   2 +-
 drivers/gpu/drm/amd/display/dmub/src/Makefile      |   2 +-
 drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.c  |   5 +
 drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.h  |   2 +
 drivers/gpu/drm/amd/display/dmub/src/dmub_dcn314.c |  67 ++++
 drivers/gpu/drm/amd/display/dmub/src/dmub_dcn314.h |  35 +++
 drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c    |  12 +-
 .../drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c    |  89 ++----
 drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c     |  21 +-
 drivers/gpu/drm/drm_syncobj.c                      |   6 +-
 drivers/gpu/drm/i915/display/intel_dpt.c           |   4 +-
 drivers/gpu/drm/i915/gem/selftests/huge_pages.c    |   6 +-
 drivers/gpu/drm/msm/adreno/a5xx_gpu.c              |   2 +-
 drivers/gpu/drm/msm/adreno/a6xx_gpu_state.h        |   2 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h      |  13 -
 drivers/gpu/drm/msm/msm_drv.c                      |   6 +-
 drivers/gpu/drm/msm/msm_gem_submit.c               |  12 +-
 drivers/gpu/drm/msm/msm_gpu.h                      |   2 +-
 drivers/gpu/drm/msm/msm_submitqueue.c              |   2 +-
 drivers/gpu/drm/ttm/ttm_bo.c                       |  25 +-
 drivers/hwmon/k10temp.c                            |  17 +-
 drivers/hwmon/nct7802.c                            |   2 +-
 drivers/i2c/busses/i2c-ibm_iic.c                   |   4 +-
 drivers/i2c/busses/i2c-nomadik.c                   |  42 +--
 drivers/i2c/busses/i2c-sh7760.c                    |   3 +-
 drivers/i2c/busses/i2c-tiny-usb.c                  |   4 +-
 drivers/infiniband/hw/bnxt_re/ib_verbs.c           |  12 +
 drivers/infiniband/hw/bnxt_re/qplib_fp.c           |  18 ++
 drivers/infiniband/hw/bnxt_re/qplib_fp.h           |   1 +
 drivers/infiniband/hw/irdma/ctrl.c                 |  31 +-
 drivers/infiniband/hw/irdma/defs.h                 |  46 ++-
 drivers/infiniband/hw/irdma/hw.c                   |   3 +-
 drivers/infiniband/hw/irdma/main.h                 |   2 +-
 drivers/infiniband/hw/irdma/puda.c                 |   6 +
 drivers/infiniband/hw/irdma/type.h                 |   2 +
 drivers/infiniband/hw/irdma/uk.c                   |   5 +-
 drivers/infiniband/hw/irdma/utils.c                |   8 +-
 drivers/infiniband/hw/mlx4/qp.c                    |  18 +-
 drivers/infiniband/hw/mthca/mthca_qp.c             |   2 +-
 drivers/irqchip/irq-bcm6345-l1.c                   |  14 +-
 drivers/irqchip/irq-gic-v3-its.c                   |  75 +++--
 drivers/md/dm-cache-policy-smq.c                   |  28 +-
 drivers/md/dm-raid.c                               |  20 +-
 drivers/md/md.c                                    |   2 +
 drivers/media/platform/amphion/vpu_core.c          |   4 +-
 drivers/net/bonding/bond_main.c                    |   5 +
 drivers/net/can/usb/gs_usb.c                       |   2 +
 drivers/net/dsa/qca/qca8k-common.c                 |  19 +-
 drivers/net/ethernet/atheros/atl1e/atl1e_main.c    |   7 +-
 drivers/net/ethernet/atheros/atlx/atl1.c           |   7 +-
 drivers/net/ethernet/emulex/benet/be_main.c        |   3 +-
 drivers/net/ethernet/hisilicon/hns3/hnae3.h        |   3 +-
 .../hisilicon/hns3/hns3_common/hclge_comm_cmd.c    |  21 +-
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c |  17 +-
 .../ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c |   3 +-
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c  |   3 +-
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c     |   2 +-
 drivers/net/ethernet/intel/iavf/iavf_main.c        |  11 +-
 drivers/net/ethernet/intel/ice/ice_ethtool_fdir.c  |  26 +-
 drivers/net/ethernet/intel/igc/igc_main.c          |  40 ++-
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c      |   2 +-
 .../ethernet/marvell/octeontx2/af/rvu_npc_hash.c   |  59 +++-
 .../ethernet/marvell/octeontx2/af/rvu_npc_hash.h   |   8 +-
 drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c   |   4 +-
 drivers/net/phy/marvell10g.c                       |   7 +
 drivers/net/team/team.c                            |   9 +
 drivers/net/virtio_net.c                           |   4 +-
 drivers/net/vxlan/vxlan_core.c                     | 165 ++++++----
 drivers/pci/controller/pcie-rockchip-ep.c          | 156 +++++----
 drivers/pci/controller/pcie-rockchip.h             |  40 ++-
 drivers/pci/pcie/aspm.c                            |  55 ++--
 drivers/phy/hisilicon/phy-hisi-inno-usb2.c         |   2 +-
 drivers/phy/mediatek/phy-mtk-dp.c                  |   2 +-
 drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c      |  74 +++--
 drivers/platform/x86/amd/pmf/acpi.c                |  23 +-
 drivers/platform/x86/amd/pmf/core.c                |   9 +-
 drivers/platform/x86/amd/pmf/pmf.h                 |  16 +
 drivers/platform/x86/amd/pmf/sps.c                 |  74 ++++-
 drivers/platform/x86/msi-laptop.c                  |   8 +-
 drivers/s390/block/dasd_3990_erp.c                 |   2 +-
 drivers/s390/block/dasd_ioctl.c                    |   1 +
 drivers/soundwire/bus.c                            |   8 +-
 drivers/soundwire/qcom.c                           |   2 +-
 drivers/staging/ks7010/ks_wlan_net.c               |   6 +-
 drivers/staging/media/atomisp/Kconfig              |   1 +
 drivers/staging/rtl8712/rtl871x_xmit.c             |  43 ++-
 drivers/staging/rtl8712/xmit_linux.c               |   6 +
 drivers/tty/n_gsm.c                                |   4 +-
 drivers/tty/n_tty.c                                |  29 +-
 drivers/tty/serial/8250/8250_dwlib.c               |   6 +-
 drivers/tty/serial/qcom_geni_serial.c              |   7 -
 drivers/tty/serial/sifive.c                        |   2 +-
 drivers/usb/cdns3/cdns3-gadget.c                   |   4 +-
 drivers/usb/core/quirks.c                          |   4 +
 drivers/usb/dwc3/core.c                            |  20 +-
 drivers/usb/dwc3/core.h                            |   3 -
 drivers/usb/dwc3/dwc3-pci.c                        |   6 +-
 drivers/usb/gadget/composite.c                     |   4 +
 drivers/usb/gadget/legacy/raw_gadget.c             |  12 +-
 drivers/usb/gadget/udc/core.c                      |   1 -
 drivers/usb/gadget/udc/tegra-xudc.c                |   8 +-
 drivers/usb/host/ohci-at91.c                       |   8 +-
 drivers/usb/host/xhci-mtk.c                        |   1 +
 drivers/usb/host/xhci-pci.c                        |   4 +-
 drivers/usb/host/xhci-ring.c                       |  25 +-
 drivers/usb/host/xhci-tegra.c                      |   8 +-
 drivers/usb/misc/ehset.c                           |   8 +-
 drivers/usb/serial/option.c                        |   6 +
 drivers/usb/serial/usb-serial-simple.c             |  73 +++--
 drivers/usb/typec/class.c                          |  15 +-
 drivers/xen/grant-table.c                          |  40 ++-
 drivers/xen/xenbus/xenbus_probe.c                  |   3 +
 fs/btrfs/block-rsv.c                               |   5 +
 fs/btrfs/qgroup.c                                  |  18 +-
 fs/btrfs/transaction.c                             |  10 +-
 fs/ceph/metric.c                                   |   2 +-
 fs/f2fs/super.c                                    |  43 ++-
 fs/file.c                                          |   6 +-
 fs/jbd2/checkpoint.c                               | 197 +++++-------
 fs/jbd2/commit.c                                   |   3 +-
 fs/jbd2/transaction.c                              |  17 +-
 fs/nfsd/nfs4state.c                                |   2 -
 fs/overlayfs/inode.c                               |   5 +-
 fs/proc/vmcore.c                                   |   2 +-
 fs/smb/client/sess.c                               |   4 +-
 include/linux/dma-fence.h                          |   2 +-
 include/linux/jbd2.h                               |   7 +-
 include/net/ipv6.h                                 |   8 +-
 include/net/vxlan.h                                |  13 +-
 include/trace/events/jbd2.h                        |  12 +-
 include/uapi/linux/blkzoned.h                      |  10 +-
 io_uring/io_uring.c                                |   2 +-
 kernel/locking/rtmutex.c                           | 172 ++++++----
 kernel/locking/rtmutex_api.c                       |   2 +-
 kernel/locking/rtmutex_common.h                    |  47 ++-
 kernel/locking/ww_mutex.h                          |  12 +-
 kernel/signal.c                                    |   4 +
 kernel/trace/ring_buffer.c                         |  22 +-
 kernel/trace/trace.c                               |   2 +-
 kernel/trace/trace.h                               |   6 +
 kernel/trace/trace_events.c                        |  14 +-
 kernel/trace/trace_events_hist.c                   |   7 +-
 kernel/trace/trace_events_synth.c                  |  80 ++++-
 kernel/trace/trace_probe.c                         |  46 ++-
 kernel/trace/trace_probe.h                         |  16 +-
 kernel/trace/trace_probe_kernel.h                  |  30 +-
 kernel/trace/trace_probe_tmpl.h                    |  59 +++-
 kernel/trace/trace_synth.h                         |   1 +
 kernel/trace/trace_uprobe.c                        |   3 +-
 lib/test_firmware.c                                |  12 +-
 lib/test_maple_tree.c                              | 233 +++++++++-----
 net/ceph/messenger.c                               |   1 +
 net/ipv6/addrconf.c                                |  14 +-
 net/mptcp/protocol.c                               |  20 +-
 net/netfilter/nf_tables_api.c                      |  18 +-
 net/netfilter/nft_immediate.c                      |  27 +-
 net/netfilter/nft_set_rbtree.c                     |  20 +-
 net/sched/sch_mqprio.c                             | 144 ++++++---
 net/tipc/crypto.c                                  |   3 +-
 net/tipc/node.c                                    |   2 +-
 sound/pci/hda/patch_realtek.c                      |   2 +
 sound/soc/codecs/wm8904.c                          |   3 +
 sound/soc/fsl/fsl_spdif.c                          |   2 +
 tools/testing/radix-tree/linux/init.h              |   1 +
 tools/testing/radix-tree/maple.c                   | 143 ++++-----
 tools/testing/selftests/net/mptcp/mptcp_join.sh    |   4 +-
 tools/testing/selftests/net/mptcp/mptcp_sockopt.sh |  24 +-
 tools/testing/selftests/rseq/rseq.c                |  28 +-
 virt/kvm/kvm_main.c                                |  24 ++
 239 files changed, 3289 insertions(+), 1930 deletions(-)

[PATCH 6.1 001/228] netfilter: nf_tables: fix underflow in object reference counter

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

commit d6b478666ffa6d2c25386d78bf1c4640d4da305e upstream.

Since ("netfilter: nf_tables: drop map element references from
preparation phase"), integration with commit protocol is better,
therefore drop the workaround that b91d90368837 ("netfilter: nf_tables:
fix leaking object reference count") provides.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netfilter/nf_tables_api.c |   13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -6504,19 +6504,19 @@ static int nft_add_set_elem(struct nft_c
 	if (flags)
 		*nft_set_ext_flags(ext) = flags;
 
+	if (obj) {
+		*nft_set_ext_obj(ext) = obj;
+		obj->use++;
+	}
 	if (ulen > 0) {
 		if (nft_set_ext_check(&tmpl, NFT_SET_EXT_USERDATA, ulen) < 0) {
 			err = -EINVAL;
-			goto err_elem_userdata;
+			goto err_elem_free;
 		}
 		udata = nft_set_ext_userdata(ext);
 		udata->len = ulen - 1;
 		nla_memcpy(&udata->data, nla[NFTA_SET_ELEM_USERDATA], ulen);
 	}
-	if (obj) {
-		*nft_set_ext_obj(ext) = obj;
-		obj->use++;
-	}
 	err = nft_set_elem_expr_setup(ctx, &tmpl, ext, expr_array, num_exprs);
 	if (err < 0)
 		goto err_elem_free;
@@ -6571,9 +6571,6 @@ err_set_full:
 err_element_clash:
 	kfree(trans);
 err_elem_free:
-	if (obj)
-		obj->use--;
-err_elem_userdata:
 	nft_set_elem_destroy(set, elem.priv, true);
 err_parse_data:
 	if (nla[NFTA_SET_ELEM_DATA] != NULL)

[PATCH 6.1 002/228] netfilter: nf_tables: fix underflow in chain reference counter

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

commit b389139f12f287b8ed2e2628b72df89a081f0b59 upstream.

Set element addition error path decrements reference counter on chains
twice: once on element release and again via nft_data_release().

Then, d6b478666ffa ("netfilter: nf_tables: fix underflow in object
reference counter") incorrectly fixed this by removing the stateful
object reference count decrement.

Restore the stateful object decrement as in b91d90368837 ("netfilter:
nf_tables: fix leaking object reference count") and let
nft_data_release() decrement the chain reference counter, so this is
done only once.

Fixes: d6b478666ffa ("netfilter: nf_tables: fix underflow in object reference counter")
Fixes: 628bd3e49cba ("netfilter: nf_tables: drop map element references from preparation phase")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netfilter/nf_tables_api.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -6571,7 +6571,9 @@ err_set_full:
 err_element_clash:
 	kfree(trans);
 err_elem_free:
-	nft_set_elem_destroy(set, elem.priv, true);
+	nf_tables_set_elem_destroy(ctx, set, elem.priv);
+	if (obj)
+		obj->use--;
 err_parse_data:
 	if (nla[NFTA_SET_ELEM_DATA] != NULL)
 		nft_data_release(&elem.data.val, desc.type);

[PATCH 6.1 003/228] platform/x86/amd/pmf: Notify OS power slider update

[Greg Kroah-Hartman]

From: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>

commit 33c9ab5b493a0e922b06c12fed4fdcb862212cda upstream.

APMF fn8 can notify EC about the OS slider position change. Add this
capability to the PMF driver so that it can call the APMF fn8 based on
the changes in the Platform profile events.

Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230714144435.1239776-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/platform/x86/amd/pmf/acpi.c |   21 ++++++++++
 drivers/platform/x86/amd/pmf/core.c |    9 +++-
 drivers/platform/x86/amd/pmf/pmf.h  |   16 +++++++
 drivers/platform/x86/amd/pmf/sps.c  |   74 ++++++++++++++++++++++++++++++++++--
 4 files changed, 114 insertions(+), 6 deletions(-)

--- a/drivers/platform/x86/amd/pmf/acpi.c
+++ b/drivers/platform/x86/amd/pmf/acpi.c
@@ -106,6 +106,27 @@ int apmf_get_static_slider_granular(stru
 									 data, sizeof(*data));
 }
 
+int apmf_os_power_slider_update(struct amd_pmf_dev *pdev, u8 event)
+{
+	struct os_power_slider args;
+	struct acpi_buffer params;
+	union acpi_object *info;
+	int err = 0;
+
+	args.size = sizeof(args);
+	args.slider_event = event;
+
+	params.length = sizeof(args);
+	params.pointer = (void *)&args;
+
+	info = apmf_if_call(pdev, APMF_FUNC_OS_POWER_SLIDER_UPDATE, &params);
+	if (!info)
+		err = -EIO;
+
+	kfree(info);
+	return err;
+}
+
 static void apmf_sbios_heartbeat_notify(struct work_struct *work)
 {
 	struct amd_pmf_dev *dev = container_of(work, struct amd_pmf_dev, heart_beat.work);
--- a/drivers/platform/x86/amd/pmf/core.c
+++ b/drivers/platform/x86/amd/pmf/core.c
@@ -71,7 +71,11 @@ static int amd_pmf_pwr_src_notify_call(s
 			return NOTIFY_DONE;
 	}
 
-	amd_pmf_set_sps_power_limits(pmf);
+	if (is_apmf_func_supported(pmf, APMF_FUNC_STATIC_SLIDER_GRANULAR))
+		amd_pmf_set_sps_power_limits(pmf);
+
+	if (is_apmf_func_supported(pmf, APMF_FUNC_OS_POWER_SLIDER_UPDATE))
+		amd_pmf_power_slider_update_event(pmf);
 
 	return NOTIFY_OK;
 }
@@ -295,7 +299,8 @@ static void amd_pmf_init_features(struct
 	int ret;
 
 	/* Enable Static Slider */
-	if (is_apmf_func_supported(dev, APMF_FUNC_STATIC_SLIDER_GRANULAR)) {
+	if (is_apmf_func_supported(dev, APMF_FUNC_STATIC_SLIDER_GRANULAR) ||
+	    is_apmf_func_supported(dev, APMF_FUNC_OS_POWER_SLIDER_UPDATE)) {
 		amd_pmf_init_sps(dev);
 		dev->pwr_src_notifier.notifier_call = amd_pmf_pwr_src_notify_call;
 		power_supply_reg_notifier(&dev->pwr_src_notifier);
--- a/drivers/platform/x86/amd/pmf/pmf.h
+++ b/drivers/platform/x86/amd/pmf/pmf.h
@@ -21,6 +21,7 @@
 #define APMF_FUNC_SBIOS_HEARTBEAT			4
 #define APMF_FUNC_AUTO_MODE					5
 #define APMF_FUNC_SET_FAN_IDX				7
+#define APMF_FUNC_OS_POWER_SLIDER_UPDATE		8
 #define APMF_FUNC_STATIC_SLIDER_GRANULAR       9
 #define APMF_FUNC_DYN_SLIDER_AC				11
 #define APMF_FUNC_DYN_SLIDER_DC				12
@@ -44,6 +45,14 @@
 #define GET_STT_LIMIT_APU	0x20
 #define GET_STT_LIMIT_HS2	0x21
 
+/* OS slider update notification */
+#define DC_BEST_PERF		0
+#define DC_BETTER_PERF		1
+#define DC_BATTERY_SAVER	3
+#define AC_BEST_PERF		4
+#define AC_BETTER_PERF		5
+#define AC_BETTER_BATTERY	6
+
 /* Fan Index for Auto Mode */
 #define FAN_INDEX_AUTO		0xFFFFFFFF
 
@@ -193,6 +202,11 @@ struct amd_pmf_static_slider_granular {
 	struct apmf_sps_prop_granular prop[POWER_SOURCE_MAX][POWER_MODE_MAX];
 };
 
+struct os_power_slider {
+	u16 size;
+	u8 slider_event;
+} __packed;
+
 struct fan_table_control {
 	bool manual;
 	unsigned long fan_id;
@@ -383,6 +397,7 @@ int amd_pmf_send_cmd(struct amd_pmf_dev
 int amd_pmf_init_metrics_table(struct amd_pmf_dev *dev);
 int amd_pmf_get_power_source(void);
 int apmf_install_handler(struct amd_pmf_dev *pmf_dev);
+int apmf_os_power_slider_update(struct amd_pmf_dev *dev, u8 flag);
 
 /* SPS Layer */
 int amd_pmf_get_pprof_modes(struct amd_pmf_dev *pmf);
@@ -393,6 +408,7 @@ void amd_pmf_deinit_sps(struct amd_pmf_d
 int apmf_get_static_slider_granular(struct amd_pmf_dev *pdev,
 				    struct apmf_static_slider_granular_output *output);
 bool is_pprof_balanced(struct amd_pmf_dev *pmf);
+int amd_pmf_power_slider_update_event(struct amd_pmf_dev *dev);
 
 
 int apmf_update_fan_idx(struct amd_pmf_dev *pdev, bool manual, u32 idx);
--- a/drivers/platform/x86/amd/pmf/sps.c
+++ b/drivers/platform/x86/amd/pmf/sps.c
@@ -119,14 +119,77 @@ int amd_pmf_get_pprof_modes(struct amd_p
 	return mode;
 }
 
+int amd_pmf_power_slider_update_event(struct amd_pmf_dev *dev)
+{
+	u8 mode, flag = 0;
+	int src;
+
+	mode = amd_pmf_get_pprof_modes(dev);
+	if (mode < 0)
+		return mode;
+
+	src = amd_pmf_get_power_source();
+
+	if (src == POWER_SOURCE_AC) {
+		switch (mode) {
+		case POWER_MODE_PERFORMANCE:
+			flag |= BIT(AC_BEST_PERF);
+			break;
+		case POWER_MODE_BALANCED_POWER:
+			flag |= BIT(AC_BETTER_PERF);
+			break;
+		case POWER_MODE_POWER_SAVER:
+			flag |= BIT(AC_BETTER_BATTERY);
+			break;
+		default:
+			dev_err(dev->dev, "unsupported platform profile\n");
+			return -EOPNOTSUPP;
+		}
+
+	} else if (src == POWER_SOURCE_DC) {
+		switch (mode) {
+		case POWER_MODE_PERFORMANCE:
+			flag |= BIT(DC_BEST_PERF);
+			break;
+		case POWER_MODE_BALANCED_POWER:
+			flag |= BIT(DC_BETTER_PERF);
+			break;
+		case POWER_MODE_POWER_SAVER:
+			flag |= BIT(DC_BATTERY_SAVER);
+			break;
+		default:
+			dev_err(dev->dev, "unsupported platform profile\n");
+			return -EOPNOTSUPP;
+		}
+	}
+
+	apmf_os_power_slider_update(dev, flag);
+
+	return 0;
+}
+
 static int amd_pmf_profile_set(struct platform_profile_handler *pprof,
 			       enum platform_profile_option profile)
 {
 	struct amd_pmf_dev *pmf = container_of(pprof, struct amd_pmf_dev, pprof);
+	int ret = 0;
 
 	pmf->current_profile = profile;
 
-	return amd_pmf_set_sps_power_limits(pmf);
+	/* Notify EC about the slider position change */
+	if (is_apmf_func_supported(pmf, APMF_FUNC_OS_POWER_SLIDER_UPDATE)) {
+		ret = amd_pmf_power_slider_update_event(pmf);
+		if (ret)
+			return ret;
+	}
+
+	if (is_apmf_func_supported(pmf, APMF_FUNC_STATIC_SLIDER_GRANULAR)) {
+		ret = amd_pmf_set_sps_power_limits(pmf);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
 }
 
 int amd_pmf_init_sps(struct amd_pmf_dev *dev)
@@ -134,10 +197,13 @@ int amd_pmf_init_sps(struct amd_pmf_dev
 	int err;
 
 	dev->current_profile = PLATFORM_PROFILE_BALANCED;
-	amd_pmf_load_defaults_sps(dev);
 
-	/* update SPS balanced power mode thermals */
-	amd_pmf_set_sps_power_limits(dev);
+	if (is_apmf_func_supported(dev, APMF_FUNC_STATIC_SLIDER_GRANULAR)) {
+		amd_pmf_load_defaults_sps(dev);
+
+		/* update SPS balanced power mode thermals */
+		amd_pmf_set_sps_power_limits(dev);
+	}
 
 	dev->pprof.profile_get = amd_pmf_profile_get;
 	dev->pprof.profile_set = amd_pmf_profile_set;

[PATCH 6.1 004/228] platform/x86/amd/pmf: reduce verbosity of apmf_get_system_params

[Greg Kroah-Hartman]

From: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>

commit 839e90e75e695b3d9ee17f5a2811e7ee5aea8d4a upstream.

apmf_get_system_params() failure is not a critical event, reduce its
verbosity from dev_err to dev_dbg.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230714144435.1239776-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/platform/x86/amd/pmf/acpi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/platform/x86/amd/pmf/acpi.c
+++ b/drivers/platform/x86/amd/pmf/acpi.c
@@ -310,7 +310,7 @@ int apmf_acpi_init(struct amd_pmf_dev *p
 
 	ret = apmf_get_system_params(pmf_dev);
 	if (ret) {
-		dev_err(pmf_dev->dev, "APMF apmf_get_system_params failed :%d\n", ret);
+		dev_dbg(pmf_dev->dev, "APMF apmf_get_system_params failed :%d\n", ret);
 		goto out;
 	}
 

[PATCH 6.1 005/228] drm/amd/display: Keep PHY active for dp config

[Greg Kroah-Hartman]

From: Agustin Gutierrez <agustin.gutierrez@amd.com>

commit 2b02d746c1818baf741f4eeeff9b97ab4b81e1cf upstream.

[Why]
Current hotplug sequence causes temporary hang at the re-entry of the
optimized power state.

[How]
Keep a PHY active when detecting DP signal + DPMS active

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/display/dc/clk_mgr/dcn314/dcn314_clk_mgr.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn314/dcn314_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn314/dcn314_clk_mgr.c
@@ -108,6 +108,11 @@ static int dcn314_get_active_display_cnt
 				stream->signal == SIGNAL_TYPE_DVI_SINGLE_LINK ||
 				stream->signal == SIGNAL_TYPE_DVI_DUAL_LINK)
 			tmds_present = true;
+
+		/* Checking stream / link detection ensuring that PHY is active*/
+		if (dc_is_dp_signal(stream->signal) && !stream->dpms_off)
+			display_count++;
+
 	}
 
 	for (i = 0; i < dc->link_count; i++) {

[PATCH 6.1 006/228] ovl: fix null pointer dereference in ovl_permission()

[Greg Kroah-Hartman]

From: Zhihao Cheng <chengzhihao1@huawei.com>

commit 1a73f5b8f079fd42a544c1600beface50c63af7c upstream.

Following process:
          P1                     P2
 path_lookupat
  link_path_walk
   inode_permission
    ovl_permission
      ovl_i_path_real(inode, &realpath)
        path->dentry = ovl_i_dentry_upper(inode)
                          drop_cache
			   __dentry_kill(ovl_dentry)
		            iput(ovl_inode)
		             ovl_destroy_inode(ovl_inode)
		              dput(oi->__upperdentry)
		               dentry_kill(upperdentry)
		                dentry_unlink_inode
				 upperdentry->d_inode = NULL
      realinode = d_inode(realpath.dentry) // return NULL
      inode_permission(realinode)
       inode->i_sb  // NULL pointer dereference
, will trigger an null pointer dereference at realinode:
  [  335.664979] BUG: kernel NULL pointer dereference,
                 address: 0000000000000002
  [  335.668032] CPU: 0 PID: 2592 Comm: ls Not tainted 6.3.0
  [  335.669956] RIP: 0010:inode_permission+0x33/0x2c0
  [  335.678939] Call Trace:
  [  335.679165]  <TASK>
  [  335.679371]  ovl_permission+0xde/0x320
  [  335.679723]  inode_permission+0x15e/0x2c0
  [  335.680090]  link_path_walk+0x115/0x550
  [  335.680771]  path_lookupat.isra.0+0xb2/0x200
  [  335.681170]  filename_lookup+0xda/0x240
  [  335.681922]  vfs_statx+0xa6/0x1f0
  [  335.682233]  vfs_fstatat+0x7b/0xb0

Fetch a reproducer in [Link].

Use the helper ovl_i_path_realinode() to get realinode and then do
non-nullptr checking.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217405
Fixes: 4b7791b2e958 ("ovl: handle idmappings in ovl_permission()")
Cc: <stable@vger.kernel.org> # v5.19
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Suggested-by: Christian Brauner <brauner@kernel.org>
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/overlayfs/inode.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/fs/overlayfs/inode.c
+++ b/fs/overlayfs/inode.c
@@ -286,8 +286,8 @@ int ovl_permission(struct user_namespace
 	int err;
 
 	/* Careful in RCU walk mode */
-	ovl_i_path_real(inode, &realpath);
-	if (!realpath.dentry) {
+	realinode = ovl_i_path_real(inode, &realpath);
+	if (!realinode) {
 		WARN_ON(!(mask & MAY_NOT_BLOCK));
 		return -ECHILD;
 	}
@@ -300,7 +300,6 @@ int ovl_permission(struct user_namespace
 	if (err)
 		return err;
 
-	realinode = d_inode(realpath.dentry);
 	old_cred = ovl_override_creds(inode->i_sb);
 	if (!upperinode &&
 	    !special_file(realinode->i_mode) && mask & MAY_WRITE) {

[PATCH 6.1 007/228] drm/amd: Move helper for dynamic speed switch check out of smu13

[Greg Kroah-Hartman]

From: Mario Limonciello <mario.limonciello@amd.com>

commit 188623076d0f1a500583d392b6187056bf7cc71a upstream.

This helper is used for checking if the connected host supports
the feature, it can be moved into generic code to be used by other
smu implementations as well.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu.h            |    1 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c     |   19 +++++++++++++++++++
 drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c |   21 +--------------------
 3 files changed, 21 insertions(+), 20 deletions(-)

--- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
@@ -1262,6 +1262,7 @@ int amdgpu_device_gpu_recover(struct amd
 void amdgpu_device_pci_config_reset(struct amdgpu_device *adev);
 int amdgpu_device_pci_reset(struct amdgpu_device *adev);
 bool amdgpu_device_need_post(struct amdgpu_device *adev);
+bool amdgpu_device_pcie_dynamic_switching_supported(void);
 bool amdgpu_device_should_use_aspm(struct amdgpu_device *adev);
 bool amdgpu_device_aspm_support_quirk(void);
 
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -1333,6 +1333,25 @@ bool amdgpu_device_need_post(struct amdg
 	return true;
 }
 
+/*
+ * Intel hosts such as Raptor Lake and Sapphire Rapids don't support dynamic
+ * speed switching. Until we have confirmation from Intel that a specific host
+ * supports it, it's safer that we keep it disabled for all.
+ *
+ * https://edc.intel.com/content/www/us/en/design/products/platforms/details/raptor-lake-s/13th-generation-core-processors-datasheet-volume-1-of-2/005/pci-express-support/
+ * https://gitlab.freedesktop.org/drm/amd/-/issues/2663
+ */
+bool amdgpu_device_pcie_dynamic_switching_supported(void)
+{
+#if IS_ENABLED(CONFIG_X86)
+	struct cpuinfo_x86 *c = &cpu_data(0);
+
+	if (c->x86_vendor == X86_VENDOR_INTEL)
+		return false;
+#endif
+	return true;
+}
+
 /**
  * amdgpu_device_should_use_aspm - check if the device should program ASPM
  *
--- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c
@@ -2490,25 +2490,6 @@ int smu_v13_0_mode1_reset(struct smu_con
 	return ret;
 }
 
-/*
- * Intel hosts such as Raptor Lake and Sapphire Rapids don't support dynamic
- * speed switching. Until we have confirmation from Intel that a specific host
- * supports it, it's safer that we keep it disabled for all.
- *
- * https://edc.intel.com/content/www/us/en/design/products/platforms/details/raptor-lake-s/13th-generation-core-processors-datasheet-volume-1-of-2/005/pci-express-support/
- * https://gitlab.freedesktop.org/drm/amd/-/issues/2663
- */
-static bool smu_v13_0_is_pcie_dynamic_switching_supported(void)
-{
-#if IS_ENABLED(CONFIG_X86)
-	struct cpuinfo_x86 *c = &cpu_data(0);
-
-	if (c->x86_vendor == X86_VENDOR_INTEL)
-		return false;
-#endif
-	return true;
-}
-
 int smu_v13_0_update_pcie_parameters(struct smu_context *smu,
 				     uint32_t pcie_gen_cap,
 				     uint32_t pcie_width_cap)
@@ -2520,7 +2501,7 @@ int smu_v13_0_update_pcie_parameters(str
 	uint32_t smu_pcie_arg;
 	int ret, i;
 
-	if (!smu_v13_0_is_pcie_dynamic_switching_supported()) {
+	if (!amdgpu_device_pcie_dynamic_switching_supported()) {
 		if (pcie_table->pcie_gen[num_of_levels - 1] < pcie_gen_cap)
 			pcie_gen_cap = pcie_table->pcie_gen[num_of_levels - 1];
 

[PATCH 6.1 008/228] drm/amd: Align SMU11 SMU_MSG_OverridePcieParameters implementation with SMU13

[Greg Kroah-Hartman]

From: Mario Limonciello <mario.limonciello@amd.com>

commit e701156ccc6c7a5f104a968dda74cd6434178712 upstream.

SMU13 overrides dynamic PCIe lane width and dynamic speed by when on
certain hosts. commit 38e4ced80479 ("drm/amd/pm: conditionally disable
pcie lane switching for some sienna_cichlid SKUs") worked around this
issue by setting up certain SKUs to set up certain limits, but the same
fundamental problem with those hosts affects all SMU11 implmentations
as well, so align the SMU11 and SMU13 driver handling.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c |   93 +++-------------
 1 file changed, 20 insertions(+), 73 deletions(-)

--- a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c
@@ -2081,89 +2081,36 @@ static int sienna_cichlid_display_disabl
 	return ret;
 }
 
-static void sienna_cichlid_get_override_pcie_settings(struct smu_context *smu,
-						      uint32_t *gen_speed_override,
-						      uint32_t *lane_width_override)
-{
-	struct amdgpu_device *adev = smu->adev;
-
-	*gen_speed_override = 0xff;
-	*lane_width_override = 0xff;
-
-	switch (adev->pdev->device) {
-	case 0x73A0:
-	case 0x73A1:
-	case 0x73A2:
-	case 0x73A3:
-	case 0x73AB:
-	case 0x73AE:
-		/* Bit 7:0: PCIE lane width, 1 to 7 corresponds is x1 to x32 */
-		*lane_width_override = 6;
-		break;
-	case 0x73E0:
-	case 0x73E1:
-	case 0x73E3:
-		*lane_width_override = 4;
-		break;
-	case 0x7420:
-	case 0x7421:
-	case 0x7422:
-	case 0x7423:
-	case 0x7424:
-		*lane_width_override = 3;
-		break;
-	default:
-		break;
-	}
-}
-
-#define MAX(a, b)	((a) > (b) ? (a) : (b))
-
 static int sienna_cichlid_update_pcie_parameters(struct smu_context *smu,
 					 uint32_t pcie_gen_cap,
 					 uint32_t pcie_width_cap)
 {
 	struct smu_11_0_dpm_context *dpm_context = smu->smu_dpm.dpm_context;
 	struct smu_11_0_pcie_table *pcie_table = &dpm_context->dpm_tables.pcie_table;
-	uint32_t gen_speed_override, lane_width_override;
-	uint8_t *table_member1, *table_member2;
-	uint32_t min_gen_speed, max_gen_speed;
-	uint32_t min_lane_width, max_lane_width;
-	uint32_t smu_pcie_arg;
+	u32 smu_pcie_arg;
 	int ret, i;
 
-	GET_PPTABLE_MEMBER(PcieGenSpeed, &table_member1);
-	GET_PPTABLE_MEMBER(PcieLaneCount, &table_member2);
-
-	sienna_cichlid_get_override_pcie_settings(smu,
-						  &gen_speed_override,
-						  &lane_width_override);
-
-	/* PCIE gen speed override */
-	if (gen_speed_override != 0xff) {
-		min_gen_speed = MIN(pcie_gen_cap, gen_speed_override);
-		max_gen_speed = MIN(pcie_gen_cap, gen_speed_override);
-	} else {
-		min_gen_speed = MAX(0, table_member1[0]);
-		max_gen_speed = MIN(pcie_gen_cap, table_member1[1]);
-		min_gen_speed = min_gen_speed > max_gen_speed ?
-				max_gen_speed : min_gen_speed;
-	}
-	pcie_table->pcie_gen[0] = min_gen_speed;
-	pcie_table->pcie_gen[1] = max_gen_speed;
-
-	/* PCIE lane width override */
-	if (lane_width_override != 0xff) {
-		min_lane_width = MIN(pcie_width_cap, lane_width_override);
-		max_lane_width = MIN(pcie_width_cap, lane_width_override);
+	/* PCIE gen speed and lane width override */
+	if (!amdgpu_device_pcie_dynamic_switching_supported()) {
+		if (pcie_table->pcie_gen[NUM_LINK_LEVELS - 1] < pcie_gen_cap)
+			pcie_gen_cap = pcie_table->pcie_gen[NUM_LINK_LEVELS - 1];
+
+		if (pcie_table->pcie_lane[NUM_LINK_LEVELS - 1] < pcie_width_cap)
+			pcie_width_cap = pcie_table->pcie_lane[NUM_LINK_LEVELS - 1];
+
+		/* Force all levels to use the same settings */
+		for (i = 0; i < NUM_LINK_LEVELS; i++) {
+			pcie_table->pcie_gen[i] = pcie_gen_cap;
+			pcie_table->pcie_lane[i] = pcie_width_cap;
+		}
 	} else {
-		min_lane_width = MAX(1, table_member2[0]);
-		max_lane_width = MIN(pcie_width_cap, table_member2[1]);
-		min_lane_width = min_lane_width > max_lane_width ?
-				 max_lane_width : min_lane_width;
+		for (i = 0; i < NUM_LINK_LEVELS; i++) {
+			if (pcie_table->pcie_gen[i] > pcie_gen_cap)
+				pcie_table->pcie_gen[i] = pcie_gen_cap;
+			if (pcie_table->pcie_lane[i] > pcie_width_cap)
+				pcie_table->pcie_lane[i] = pcie_width_cap;
+		}
 	}
-	pcie_table->pcie_lane[0] = min_lane_width;
-	pcie_table->pcie_lane[1] = max_lane_width;
 
 	for (i = 0; i < NUM_LINK_LEVELS; i++) {
 		smu_pcie_arg = (i << 16 |

[PATCH 6.1 009/228] jbd2: Fix wrongly judgement for buffer head removing while doing checkpoint

[Greg Kroah-Hartman]

From: Zhihao Cheng <chengzhihao1@huawei.com>

[ Upstream commit e34c8dd238d0c9368b746480f313055f5bab5040 ]

Following process,

jbd2_journal_commit_transaction
// there are several dirty buffer heads in transaction->t_checkpoint_list
          P1                   wb_workfn
jbd2_log_do_checkpoint
 if (buffer_locked(bh)) // false
                            __block_write_full_page
                             trylock_buffer(bh)
                             test_clear_buffer_dirty(bh)
 if (!buffer_dirty(bh))
  __jbd2_journal_remove_checkpoint(jh)
   if (buffer_write_io_error(bh)) // false
                             >> bh IO error occurs <<
 jbd2_cleanup_journal_tail
  __jbd2_update_log_tail
   jbd2_write_superblock
   // The bh won't be replayed in next mount.
, which could corrupt the ext4 image, fetch a reproducer in [Link].

Since writeback process clears buffer dirty after locking buffer head,
we can fix it by try locking buffer and check dirtiness while buffer is
locked, the buffer head can be removed if it is neither dirty nor locked.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217490
Fixes: 470decc613ab ("[PATCH] jbd2: initial copy of files from jbd")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230606135928.434610-5-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jbd2/checkpoint.c | 32 +++++++++++++++++---------------
 1 file changed, 17 insertions(+), 15 deletions(-)

diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c
index 25e3c20eb19f6..c4e0da6db7195 100644
--- a/fs/jbd2/checkpoint.c
+++ b/fs/jbd2/checkpoint.c
@@ -221,20 +221,6 @@ int jbd2_log_do_checkpoint(journal_t *journal)
 		jh = transaction->t_checkpoint_list;
 		bh = jh2bh(jh);
 
-		/*
-		 * The buffer may be writing back, or flushing out in the
-		 * last couple of cycles, or re-adding into a new transaction,
-		 * need to check it again until it's unlocked.
-		 */
-		if (buffer_locked(bh)) {
-			get_bh(bh);
-			spin_unlock(&journal->j_list_lock);
-			wait_on_buffer(bh);
-			/* the journal_head may have gone by now */
-			BUFFER_TRACE(bh, "brelse");
-			__brelse(bh);
-			goto retry;
-		}
 		if (jh->b_transaction != NULL) {
 			transaction_t *t = jh->b_transaction;
 			tid_t tid = t->t_tid;
@@ -269,7 +255,22 @@ int jbd2_log_do_checkpoint(journal_t *journal)
 			spin_lock(&journal->j_list_lock);
 			goto restart;
 		}
-		if (!buffer_dirty(bh)) {
+		if (!trylock_buffer(bh)) {
+			/*
+			 * The buffer is locked, it may be writing back, or
+			 * flushing out in the last couple of cycles, or
+			 * re-adding into a new transaction, need to check
+			 * it again until it's unlocked.
+			 */
+			get_bh(bh);
+			spin_unlock(&journal->j_list_lock);
+			wait_on_buffer(bh);
+			/* the journal_head may have gone by now */
+			BUFFER_TRACE(bh, "brelse");
+			__brelse(bh);
+			goto retry;
+		} else if (!buffer_dirty(bh)) {
+			unlock_buffer(bh);
 			BUFFER_TRACE(bh, "remove from checkpoint");
 			/*
 			 * If the transaction was released or the checkpoint
@@ -279,6 +280,7 @@ int jbd2_log_do_checkpoint(journal_t *journal)
 			    !transaction->t_checkpoint_list)
 				goto out;
 		} else {
+			unlock_buffer(bh);
 			/*
 			 * We are about to write the buffer, it could be
 			 * raced by some other transaction shrink or buffer
-- 
2.39.2

[PATCH 6.1 010/228] blk-mq: Fix stall due to recursive flush plug

[Greg Kroah-Hartman]

From: Ross Lagerwall <ross.lagerwall@citrix.com>

[ Upstream commit 70904263512a74a3b8941dd9e6e515ca6fc57821 ]

We have seen rare IO stalls as follows:

* blk_mq_plug_issue_direct() is entered with an mq_list containing two
requests.
* For the first request, it sets last == false and enters the driver's
queue_rq callback.
* The driver queue_rq callback indirectly calls schedule() which calls
blk_flush_plug(). This may happen if the driver has the
BLK_MQ_F_BLOCKING flag set and is allowed to sleep in ->queue_rq.
* blk_flush_plug() handles the remaining request in the mq_list. mq_list
is now empty.
* The original call to queue_rq resumes (with last == false).
* The loop in blk_mq_plug_issue_direct() terminates because there are no
remaining requests in mq_list.

The IO is now stalled because the last request submitted to the driver
had last == false and there was no subsequent call to commit_rqs().

Fix this by returning early in blk_mq_flush_plug_list() if rq_count is 0
which it will be in the recursive case, rather than checking if the
mq_list is empty. At the same time, adjust one of the callers to skip
the mq_list empty check as it is not necessary.

Fixes: dc5fc361d891 ("block: attempt direct issue of plug list")
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230714101106.3635611-1-ross.lagerwall@citrix.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-core.c | 3 +--
 block/blk-mq.c   | 9 ++++++++-
 2 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/block/blk-core.c b/block/blk-core.c
index 24ee7785a5ad5..ebb7a1689b261 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1140,8 +1140,7 @@ void __blk_flush_plug(struct blk_plug *plug, bool from_schedule)
 {
 	if (!list_empty(&plug->cb_list))
 		flush_plug_callbacks(plug, from_schedule);
-	if (!rq_list_empty(plug->mq_list))
-		blk_mq_flush_plug_list(plug, from_schedule);
+	blk_mq_flush_plug_list(plug, from_schedule);
 	/*
 	 * Unconditionally flush out cached requests, even if the unplug
 	 * event came from schedule. Since we know hold references to the
diff --git a/block/blk-mq.c b/block/blk-mq.c
index add013d5bbdab..100fb0c3114f8 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -2749,7 +2749,14 @@ void blk_mq_flush_plug_list(struct blk_plug *plug, bool from_schedule)
 {
 	struct request *rq;
 
-	if (rq_list_empty(plug->mq_list))
+	/*
+	 * We may have been called recursively midway through handling
+	 * plug->mq_list via a schedule() in the driver's queue_rq() callback.
+	 * To avoid mq_list changing under our feet, clear rq_count early and
+	 * bail out specifically if rq_count is 0 rather than checking
+	 * whether the mq_list is empty.
+	 */
+	if (plug->rq_count == 0)
 		return;
 	plug->rq_count = 0;
 
-- 
2.39.2

[PATCH 6.1 011/228] powerpc/pseries/vas: Hold mmap_mutex after mmap lock during window close

[Greg Kroah-Hartman]

From: Haren Myneni <haren@linux.ibm.com>

[ Upstream commit b59c9dc4d9d47b3c4572d826603fde507055b656 ]

Commit 8ef7b9e1765a ("powerpc/pseries/vas: Close windows with DLPAR
core removal") unmaps the window paste address and issues HCALL to
close window in the hypervisor for migration or DLPAR core removal
events. So holds mmap_mutex and then mmap lock before unmap the
paste address. But if the user space issue mmap paste address at
the same time with the migration event, coproc_mmap() is called
after holding the mmap lock which can trigger deadlock when trying
to acquire mmap_mutex in coproc_mmap().

t1: mmap() call to mmap              t2: Migration event
    window paste address

do_mmap2()                           migration_store()
 ksys_mmap_pgoff()                    pseries_migrate_partition()
  vm_mmap_pgoff()                      vas_migration_handler()
    Acquire mmap lock                   reconfig_close_windows()
    do_mmap()                             lock mmap_mutex
     mmap_region()                        Acquire mmap lock
      call_mmap()                         //Wait for mmap lock
       coproc_mmap()                        unmap vma
         lock mmap_mutex                    update window status
         //wait for mmap_mutex            Release mmap lock
          mmap vma                        unlock mmap_mutex
          update window status
         unlock mmap_mutex
    ...
    Release mmap lock

Fix this deadlock issue by holding mmap lock first before mmap_mutex
in reconfig_close_windows().

Fixes: 8ef7b9e1765a ("powerpc/pseries/vas: Close windows with DLPAR core removal")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230716100506.7833-1-haren@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/vas.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/platforms/pseries/vas.c b/arch/powerpc/platforms/pseries/vas.c
index 880b962afc057..041a25c08066b 100644
--- a/arch/powerpc/platforms/pseries/vas.c
+++ b/arch/powerpc/platforms/pseries/vas.c
@@ -744,6 +744,12 @@ static int reconfig_close_windows(struct vas_caps *vcap, int excess_creds,
 		}
 
 		task_ref = &win->vas_win.task_ref;
+		/*
+		 * VAS mmap (coproc_mmap()) and its fault handler
+		 * (vas_mmap_fault()) are called after holding mmap lock.
+		 * So hold mmap mutex after mmap_lock to avoid deadlock.
+		 */
+		mmap_write_lock(task_ref->mm);
 		mutex_lock(&task_ref->mmap_mutex);
 		vma = task_ref->vma;
 		/*
@@ -752,7 +758,6 @@ static int reconfig_close_windows(struct vas_caps *vcap, int excess_creds,
 		 */
 		win->vas_win.status |= flag;
 
-		mmap_write_lock(task_ref->mm);
 		/*
 		 * vma is set in the original mapping. But this mapping
 		 * is done with mmap() after the window is opened with ioctl.
@@ -763,8 +768,8 @@ static int reconfig_close_windows(struct vas_caps *vcap, int excess_creds,
 			zap_page_range(vma, vma->vm_start,
 					vma->vm_end - vma->vm_start);
 
-		mmap_write_unlock(task_ref->mm);
 		mutex_unlock(&task_ref->mmap_mutex);
+		mmap_write_unlock(task_ref->mm);
 		/*
 		 * Close VAS window in the hypervisor, but do not
 		 * free vas_window struct since it may be reused
-- 
2.39.2

[PATCH 6.1 012/228] KVM: s390: pv: fix index value of replaced ASCE

[Greg Kroah-Hartman]

From: Claudio Imbrenda <imbrenda@linux.ibm.com>

[ Upstream commit c2fceb59bbda16468bda82b002383bff59de89ab ]

The index field of the struct page corresponding to a guest ASCE should
be 0. When replacing the ASCE in s390_replace_asce(), the index of the
new ASCE should also be set to 0.

Having the wrong index might lead to the wrong addresses being passed
around when notifying pte invalidations, and eventually to validity
intercepts (VM crash) if the prefix gets unmapped and the notifier gets
called with the wrong address.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Fixes: faa2f72cb356 ("KVM: s390: pv: leak the topmost page table when destroy fails")
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20230705111937.33472-3-imbrenda@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/mm/gmap.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/s390/mm/gmap.c b/arch/s390/mm/gmap.c
index 02d15c8dc92e9..243f673fa6515 100644
--- a/arch/s390/mm/gmap.c
+++ b/arch/s390/mm/gmap.c
@@ -2843,6 +2843,7 @@ int s390_replace_asce(struct gmap *gmap)
 	page = alloc_pages(GFP_KERNEL_ACCOUNT, CRST_ALLOC_ORDER);
 	if (!page)
 		return -ENOMEM;
+	page->index = 0;
 	table = page_to_virt(page);
 	memcpy(table, gmap->table, 1UL << (CRST_ALLOC_ORDER + PAGE_SHIFT));
 
-- 
2.39.2

[PATCH 6.1 013/228] io_uring: dont audit the capability check in io_uring_create()

[Greg Kroah-Hartman]

From: Ondrej Mosnacek <omosnace@redhat.com>

[ Upstream commit 6adc2272aaaf84f34b652cf77f770c6fcc4b8336 ]

The check being unconditional may lead to unwanted denials reported by
LSMs when a process has the capability granted by DAC, but denied by an
LSM. In the case of SELinux such denials are a problem, since they can't
be effectively filtered out via the policy and when not silenced, they
produce noise that may hide a true problem or an attack.

Since not having the capability merely means that the created io_uring
context will be accounted against the current user's RLIMIT_MEMLOCK
limit, we can disable auditing of denials for this check by using
ns_capable_noaudit() instead of capable().

Fixes: 2b188cc1bb85 ("Add io_uring IO interface")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2193317
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Link: https://lore.kernel.org/r/20230718115607.65652-1-omosnace@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 io_uring/io_uring.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c
index bd7b8cf8bc677..f091153bc8540 100644
--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -3477,7 +3477,7 @@ static __cold int io_uring_create(unsigned entries, struct io_uring_params *p,
 		ctx->syscall_iopoll = 1;
 
 	ctx->compat = in_compat_syscall();
-	if (!capable(CAP_IPC_LOCK))
+	if (!ns_capable_noaudit(&init_user_ns, CAP_IPC_LOCK))
 		ctx->user = get_uid(current_user());
 
 	/*
-- 
2.39.2

[PATCH 6.1 014/228] gpio: tps68470: Make tps68470_gpio_output() always set the initial value

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 5a7adc6c1069ce31ef4f606ae9c05592c80a6ab5 ]

Make tps68470_gpio_output() call tps68470_gpio_set() for output-only pins
too, so that the initial value passed to gpiod_direction_output() is
honored for these pins too.

Fixes: 275b13a65547 ("gpio: Add support for TPS68470 GPIOs")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-tps68470.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpio/gpio-tps68470.c b/drivers/gpio/gpio-tps68470.c
index aaddcabe9b359..532deaddfd4e2 100644
--- a/drivers/gpio/gpio-tps68470.c
+++ b/drivers/gpio/gpio-tps68470.c
@@ -91,13 +91,13 @@ static int tps68470_gpio_output(struct gpio_chip *gc, unsigned int offset,
 	struct tps68470_gpio_data *tps68470_gpio = gpiochip_get_data(gc);
 	struct regmap *regmap = tps68470_gpio->tps68470_regmap;
 
+	/* Set the initial value */
+	tps68470_gpio_set(gc, offset, value);
+
 	/* rest are always outputs */
 	if (offset >= TPS68470_N_REGULAR_GPIO)
 		return 0;
 
-	/* Set the initial value */
-	tps68470_gpio_set(gc, offset, value);
-
 	return regmap_update_bits(regmap, TPS68470_GPIO_CTL_REG_A(offset),
 				 TPS68470_GPIO_MODE_MASK,
 				 TPS68470_GPIO_MODE_OUT_CMOS);
-- 
2.39.2

[PATCH 6.1 015/228] gpio: mvebu: Make use of devm_pwmchip_add

[Greg Kroah-Hartman]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit 1945063eb59e64d2919cb14d54d081476d9e53bb ]

This allows to get rid of a call to pwmchip_remove() in the error path. There
is no .remove function for this driver, so this change fixes a resource leak
when a gpio-mvebu device is unbound.

Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-mvebu.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index 91a4232ee58c2..f86b6c3bc1604 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -874,7 +874,7 @@ static int mvebu_pwm_probe(struct platform_device *pdev,
 
 	spin_lock_init(&mvpwm->lock);
 
-	return pwmchip_add(&mvpwm->chip);
+	return devm_pwmchip_add(dev, &mvpwm->chip);
 }
 
 #ifdef CONFIG_DEBUG_FS
@@ -1243,8 +1243,7 @@ static int mvebu_gpio_probe(struct platform_device *pdev)
 	if (!mvchip->domain) {
 		dev_err(&pdev->dev, "couldn't allocate irq domain %s (DT).\n",
 			mvchip->chip.label);
-		err = -ENODEV;
-		goto err_pwm;
+		return -ENODEV;
 	}
 
 	err = irq_alloc_domain_generic_chips(
@@ -1296,9 +1295,6 @@ static int mvebu_gpio_probe(struct platform_device *pdev)
 
 err_domain:
 	irq_domain_remove(mvchip->domain);
-err_pwm:
-	pwmchip_remove(&mvchip->mvpwm->chip);
-
 	return err;
 }
 
-- 
2.39.2

[PATCH 6.1 016/228] gpio: mvebu: fix irq domain leak

[Greg Kroah-Hartman]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

[ Upstream commit 644ee70267a934be27370f9aa618b29af7290544 ]

Uwe Kleine-König pointed out we still have one resource leak in the mvebu
driver triggered on driver detach. Let's address it with a custom devm
action.

Fixes: 812d47889a8e ("gpio/mvebu: Use irq_domain_add_linear")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-mvebu.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index f86b6c3bc1604..0ba9d04183a60 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -1112,6 +1112,13 @@ static int mvebu_gpio_probe_syscon(struct platform_device *pdev,
 	return 0;
 }
 
+static void mvebu_gpio_remove_irq_domain(void *data)
+{
+	struct irq_domain *domain = data;
+
+	irq_domain_remove(domain);
+}
+
 static int mvebu_gpio_probe(struct platform_device *pdev)
 {
 	struct mvebu_gpio_chip *mvchip;
@@ -1246,13 +1253,18 @@ static int mvebu_gpio_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	err = devm_add_action_or_reset(&pdev->dev, mvebu_gpio_remove_irq_domain,
+				       mvchip->domain);
+	if (err)
+		return err;
+
 	err = irq_alloc_domain_generic_chips(
 	    mvchip->domain, ngpios, 2, np->name, handle_level_irq,
 	    IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_LEVEL, 0, 0);
 	if (err) {
 		dev_err(&pdev->dev, "couldn't allocate irq chips %s (DT).\n",
 			mvchip->chip.label);
-		goto err_domain;
+		return err;
 	}
 
 	/*
@@ -1292,10 +1304,6 @@ static int mvebu_gpio_probe(struct platform_device *pdev)
 	}
 
 	return 0;
-
-err_domain:
-	irq_domain_remove(mvchip->domain);
-	return err;
 }
 
 static struct platform_driver mvebu_gpio_driver = {
-- 
2.39.2

[PATCH 6.1 017/228] btrfs: fix race between quota disable and relocation

[Greg Kroah-Hartman]

From: Filipe Manana <fdmanana@suse.com>

[ Upstream commit 8a4a0b2a3eaf75ca8854f856ef29690c12b2f531 ]

If we disable quotas while we have a relocation of a metadata block group
that has extents belonging to the quota root, we can cause the relocation
to fail with -ENOENT. This is because relocation builds backref nodes for
extents of the quota root and later needs to walk the backrefs and access
the quota root - however if in between a task disables quotas, it results
in deleting the quota root from the root tree (with btrfs_del_root(),
called from btrfs_quota_disable().

This can be sporadically triggered by test case btrfs/255 from fstests:

  $ ./check btrfs/255
  FSTYP         -- btrfs
  PLATFORM      -- Linux/x86_64 debian0 6.4.0-rc6-btrfs-next-134+ #1 SMP PREEMPT_DYNAMIC Thu Jun 15 11:59:28 WEST 2023
  MKFS_OPTIONS  -- /dev/sdc
  MOUNT_OPTIONS -- /dev/sdc /home/fdmanana/btrfs-tests/scratch_1

  btrfs/255 6s ... _check_dmesg: something found in dmesg (see /home/fdmanana/git/hub/xfstests/results//btrfs/255.dmesg)
  - output mismatch (see /home/fdmanana/git/hub/xfstests/results//btrfs/255.out.bad)
#      --- tests/btrfs/255.out	2023-03-02 21:47:53.876609426 +0000
#      +++ /home/fdmanana/git/hub/xfstests/results//btrfs/255.out.bad	2023-06-16 10:20:39.267563212 +0100
#      @@ -1,2 +1,4 @@
#       QA output created by 255
#      +ERROR: error during balancing '/home/fdmanana/btrfs-tests/scratch_1': No such file or directory
#      +There may be more info in syslog - try dmesg | tail
#       Silence is golden
#      ...
      (Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/btrfs/255.out /home/fdmanana/git/hub/xfstests/results//btrfs/255.out.bad'  to see the entire diff)
  Ran: btrfs/255
  Failures: btrfs/255
  Failed 1 of 1 tests

To fix this make the quota disable operation take the cleaner mutex, as
relocation of a block group also takes this mutex. This is also what we
do when deleting a subvolume/snapshot, we take the cleaner mutex in the
cleaner kthread (at cleaner_kthread()) and then we call btrfs_del_root()
at btrfs_drop_snapshot() while under the protection of the cleaner mutex.

Fixes: bed92eae26cc ("Btrfs: qgroup implementation and prototypes")
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/qgroup.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c
index cacdb2c5d1528..26cabffd59710 100644
--- a/fs/btrfs/qgroup.c
+++ b/fs/btrfs/qgroup.c
@@ -1227,12 +1227,23 @@ int btrfs_quota_disable(struct btrfs_fs_info *fs_info)
 	int ret = 0;
 
 	/*
-	 * We need to have subvol_sem write locked, to prevent races between
-	 * concurrent tasks trying to disable quotas, because we will unlock
-	 * and relock qgroup_ioctl_lock across BTRFS_FS_QUOTA_ENABLED changes.
+	 * We need to have subvol_sem write locked to prevent races with
+	 * snapshot creation.
 	 */
 	lockdep_assert_held_write(&fs_info->subvol_sem);
 
+	/*
+	 * Lock the cleaner mutex to prevent races with concurrent relocation,
+	 * because relocation may be building backrefs for blocks of the quota
+	 * root while we are deleting the root. This is like dropping fs roots
+	 * of deleted snapshots/subvolumes, we need the same protection.
+	 *
+	 * This also prevents races between concurrent tasks trying to disable
+	 * quotas, because we will unlock and relock qgroup_ioctl_lock across
+	 * BTRFS_FS_QUOTA_ENABLED changes.
+	 */
+	mutex_lock(&fs_info->cleaner_mutex);
+
 	mutex_lock(&fs_info->qgroup_ioctl_lock);
 	if (!fs_info->quota_root)
 		goto out;
@@ -1314,6 +1325,7 @@ int btrfs_quota_disable(struct btrfs_fs_info *fs_info)
 		btrfs_end_transaction(trans);
 	else if (trans)
 		ret = btrfs_end_transaction(trans);
+	mutex_unlock(&fs_info->cleaner_mutex);
 
 	return ret;
 }
-- 
2.39.2

[PATCH 6.1 018/228] f2fs: fix to set flush_merge opt and show noflush_merge

[Greg Kroah-Hartman]

From: Yangtao Li <frank.li@vivo.com>

[ Upstream commit 967eaad1fed5f6335ea97a47d45214744dc57925 ]

Some minor modifications to flush_merge and related parameters:

  1.The FLUSH_MERGE opt is set by default only in non-ro mode.
  2.When ro and merge are set at the same time, an error is reported.
  3.Display noflush_merge mount opt.

Suggested-by: Chao Yu <chao@kernel.org>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: 458c15dfbce6 ("f2fs: don't reset unchangable mount option in f2fs_remount()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/super.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index b6dad389fa144..36bb1c969e8bb 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -1347,6 +1347,12 @@ static int parse_options(struct super_block *sb, char *options, bool is_remount)
 		return -EINVAL;
 	}
 
+	if ((f2fs_sb_has_readonly(sbi) || f2fs_readonly(sbi->sb)) &&
+		test_opt(sbi, FLUSH_MERGE)) {
+		f2fs_err(sbi, "FLUSH_MERGE not compatible with readonly mode");
+		return -EINVAL;
+	}
+
 	if (f2fs_sb_has_readonly(sbi) && !f2fs_readonly(sbi->sb)) {
 		f2fs_err(sbi, "Allow to mount readonly mode only");
 		return -EROFS;
@@ -1933,8 +1939,10 @@ static int f2fs_show_options(struct seq_file *seq, struct dentry *root)
 		seq_puts(seq, ",inline_dentry");
 	else
 		seq_puts(seq, ",noinline_dentry");
-	if (!f2fs_readonly(sbi->sb) && test_opt(sbi, FLUSH_MERGE))
+	if (test_opt(sbi, FLUSH_MERGE))
 		seq_puts(seq, ",flush_merge");
+	else
+		seq_puts(seq, ",noflush_merge");
 	if (test_opt(sbi, NOBARRIER))
 		seq_puts(seq, ",nobarrier");
 	if (test_opt(sbi, FASTBOOT))
@@ -2063,7 +2071,8 @@ static void default_options(struct f2fs_sb_info *sbi)
 	set_opt(sbi, MERGE_CHECKPOINT);
 	F2FS_OPTION(sbi).unusable_cap = 0;
 	sbi->sb->s_flags |= SB_LAZYTIME;
-	set_opt(sbi, FLUSH_MERGE);
+	if (!f2fs_sb_has_readonly(sbi) && !f2fs_readonly(sbi->sb))
+		set_opt(sbi, FLUSH_MERGE);
 	if (f2fs_hw_support_discard(sbi) || f2fs_hw_should_discard(sbi))
 		set_opt(sbi, DISCARD);
 	if (f2fs_sb_has_blkzoned(sbi)) {
-- 
2.39.2

[PATCH 6.1 019/228] f2fs: dont reset unchangable mount option in f2fs_remount()

[Greg Kroah-Hartman]

From: Chao Yu <chao@kernel.org>

[ Upstream commit 458c15dfbce62c35fefd9ca637b20a051309c9f1 ]

syzbot reports a bug as below:

general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] PREEMPT SMP KASAN
RIP: 0010:__lock_acquire+0x69/0x2000 kernel/locking/lockdep.c:4942
Call Trace:
 lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5691
 __raw_write_lock include/linux/rwlock_api_smp.h:209 [inline]
 _raw_write_lock+0x2e/0x40 kernel/locking/spinlock.c:300
 __drop_extent_tree+0x3ac/0x660 fs/f2fs/extent_cache.c:1100
 f2fs_drop_extent_tree+0x17/0x30 fs/f2fs/extent_cache.c:1116
 f2fs_insert_range+0x2d5/0x3c0 fs/f2fs/file.c:1664
 f2fs_fallocate+0x4e4/0x6d0 fs/f2fs/file.c:1838
 vfs_fallocate+0x54b/0x6b0 fs/open.c:324
 ksys_fallocate fs/open.c:347 [inline]
 __do_sys_fallocate fs/open.c:355 [inline]
 __se_sys_fallocate fs/open.c:353 [inline]
 __x64_sys_fallocate+0xbd/0x100 fs/open.c:353
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

The root cause is race condition as below:
- since it tries to remount rw filesystem, so that do_remount won't
call sb_prepare_remount_readonly to block fallocate, there may be race
condition in between remount and fallocate.
- in f2fs_remount(), default_options() will reset mount option to default
one, and then update it based on result of parse_options(), so there is
a hole which race condition can happen.

Thread A			Thread B
- f2fs_fill_super
 - parse_options
  - clear_opt(READ_EXTENT_CACHE)

- f2fs_remount
 - default_options
  - set_opt(READ_EXTENT_CACHE)
				- f2fs_fallocate
				 - f2fs_insert_range
				  - f2fs_drop_extent_tree
				   - __drop_extent_tree
				    - __may_extent_tree
				     - test_opt(READ_EXTENT_CACHE) return true
				    - write_lock(&et->lock) access NULL pointer
 - parse_options
  - clear_opt(READ_EXTENT_CACHE)

Cc: <stable@vger.kernel.org>
Reported-by: syzbot+d015b6c2fbb5c383bf08@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-f2fs-devel/20230522124203.3838360-1-chao@kernel.org
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/super.c | 30 ++++++++++++++++++------------
 1 file changed, 18 insertions(+), 12 deletions(-)

diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index 36bb1c969e8bb..ff47aad636e5b 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -2040,9 +2040,22 @@ static int f2fs_show_options(struct seq_file *seq, struct dentry *root)
 	return 0;
 }
 
-static void default_options(struct f2fs_sb_info *sbi)
+static void default_options(struct f2fs_sb_info *sbi, bool remount)
 {
 	/* init some FS parameters */
+	if (!remount) {
+		set_opt(sbi, READ_EXTENT_CACHE);
+		clear_opt(sbi, DISABLE_CHECKPOINT);
+
+		if (f2fs_hw_support_discard(sbi) || f2fs_hw_should_discard(sbi))
+			set_opt(sbi, DISCARD);
+
+		if (f2fs_sb_has_blkzoned(sbi))
+			F2FS_OPTION(sbi).discard_unit = DISCARD_UNIT_SECTION;
+		else
+			F2FS_OPTION(sbi).discard_unit = DISCARD_UNIT_BLOCK;
+	}
+
 	if (f2fs_sb_has_readonly(sbi))
 		F2FS_OPTION(sbi).active_logs = NR_CURSEG_RO_TYPE;
 	else
@@ -2065,23 +2078,16 @@ static void default_options(struct f2fs_sb_info *sbi)
 	set_opt(sbi, INLINE_XATTR);
 	set_opt(sbi, INLINE_DATA);
 	set_opt(sbi, INLINE_DENTRY);
-	set_opt(sbi, READ_EXTENT_CACHE);
 	set_opt(sbi, NOHEAP);
-	clear_opt(sbi, DISABLE_CHECKPOINT);
 	set_opt(sbi, MERGE_CHECKPOINT);
 	F2FS_OPTION(sbi).unusable_cap = 0;
 	sbi->sb->s_flags |= SB_LAZYTIME;
 	if (!f2fs_sb_has_readonly(sbi) && !f2fs_readonly(sbi->sb))
 		set_opt(sbi, FLUSH_MERGE);
-	if (f2fs_hw_support_discard(sbi) || f2fs_hw_should_discard(sbi))
-		set_opt(sbi, DISCARD);
-	if (f2fs_sb_has_blkzoned(sbi)) {
+	if (f2fs_sb_has_blkzoned(sbi))
 		F2FS_OPTION(sbi).fs_mode = FS_MODE_LFS;
-		F2FS_OPTION(sbi).discard_unit = DISCARD_UNIT_SECTION;
-	} else {
+	else
 		F2FS_OPTION(sbi).fs_mode = FS_MODE_ADAPTIVE;
-		F2FS_OPTION(sbi).discard_unit = DISCARD_UNIT_BLOCK;
-	}
 
 #ifdef CONFIG_F2FS_FS_XATTR
 	set_opt(sbi, XATTR_USER);
@@ -2253,7 +2259,7 @@ static int f2fs_remount(struct super_block *sb, int *flags, char *data)
 			clear_sbi_flag(sbi, SBI_NEED_SB_WRITE);
 	}
 
-	default_options(sbi);
+	default_options(sbi, true);
 
 	/* parse mount options */
 	err = parse_options(sb, data, true);
@@ -4150,7 +4156,7 @@ static int f2fs_fill_super(struct super_block *sb, void *data, int silent)
 		sbi->s_chksum_seed = f2fs_chksum(sbi, ~0, raw_super->uuid,
 						sizeof(raw_super->uuid));
 
-	default_options(sbi);
+	default_options(sbi, false);
 	/* parse mount options */
 	options = kstrdup((const char *)data, GFP_KERNEL);
 	if (data && !options) {
-- 
2.39.2

[PATCH 6.1 020/228] i2c: Delete error messages for failed memory allocations

[Greg Kroah-Hartman]

From: Markus Elfring <elfring@users.sourceforge.net>

[ Upstream commit 6b3b21a8542fd2fb6ffc61bc13b9419f0c58ebad ]

These issues were detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: 05f933d5f731 ("i2c: nomadik: Remove a useless call in the remove function")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-ibm_iic.c  | 4 +---
 drivers/i2c/busses/i2c-nomadik.c  | 1 -
 drivers/i2c/busses/i2c-sh7760.c   | 1 -
 drivers/i2c/busses/i2c-tiny-usb.c | 4 +---
 4 files changed, 2 insertions(+), 8 deletions(-)

diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index eeb80e34f9ad7..de3b609515e08 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -694,10 +694,8 @@ static int iic_probe(struct platform_device *ofdev)
 	int ret;
 
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
-	if (!dev) {
-		dev_err(&ofdev->dev, "failed to allocate device data\n");
+	if (!dev)
 		return -ENOMEM;
-	}
 
 	platform_set_drvdata(ofdev, dev);
 
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index a2d12a5b1c34c..05eaae5aeb180 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -972,7 +972,6 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 
 	dev = devm_kzalloc(&adev->dev, sizeof(struct nmk_i2c_dev), GFP_KERNEL);
 	if (!dev) {
-		dev_err(&adev->dev, "cannot allocate memory\n");
 		ret = -ENOMEM;
 		goto err_no_mem;
 	}
diff --git a/drivers/i2c/busses/i2c-sh7760.c b/drivers/i2c/busses/i2c-sh7760.c
index 319d1fa617c88..a0ccc5d009874 100644
--- a/drivers/i2c/busses/i2c-sh7760.c
+++ b/drivers/i2c/busses/i2c-sh7760.c
@@ -445,7 +445,6 @@ static int sh7760_i2c_probe(struct platform_device *pdev)
 
 	id = kzalloc(sizeof(struct cami2c), GFP_KERNEL);
 	if (!id) {
-		dev_err(&pdev->dev, "no mem for private data\n");
 		ret = -ENOMEM;
 		goto out0;
 	}
diff --git a/drivers/i2c/busses/i2c-tiny-usb.c b/drivers/i2c/busses/i2c-tiny-usb.c
index 7279ca0eaa2d0..d1fa9ff5aeab4 100644
--- a/drivers/i2c/busses/i2c-tiny-usb.c
+++ b/drivers/i2c/busses/i2c-tiny-usb.c
@@ -226,10 +226,8 @@ static int i2c_tiny_usb_probe(struct usb_interface *interface,
 
 	/* allocate memory for our device state and initialize it */
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
-	if (dev == NULL) {
-		dev_err(&interface->dev, "Out of memory\n");
+	if (!dev)
 		goto error;
-	}
 
 	dev->usb_dev = usb_get_dev(interface_to_usbdev(interface));
 	dev->interface = interface;
-- 
2.39.2

[PATCH 6.1 021/228] i2c: Improve size determinations

[Greg Kroah-Hartman]

From: Markus Elfring <elfring@users.sourceforge.net>

[ Upstream commit 06e989578232da33a7fe96b04191b862af8b2cec ]

Replace the specification of a data structure by a pointer dereference
as the parameter for the operator "sizeof" to make the corresponding
size determination a bit safer according to the Linux coding style
convention.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: 05f933d5f731 ("i2c: nomadik: Remove a useless call in the remove function")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-nomadik.c | 2 +-
 drivers/i2c/busses/i2c-sh7760.c  | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 05eaae5aeb180..5004b9dd98563 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -970,7 +970,7 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 	struct i2c_vendor_data *vendor = id->data;
 	u32 max_fifo_threshold = (vendor->fifodepth / 2) - 1;
 
-	dev = devm_kzalloc(&adev->dev, sizeof(struct nmk_i2c_dev), GFP_KERNEL);
+	dev = devm_kzalloc(&adev->dev, sizeof(*dev), GFP_KERNEL);
 	if (!dev) {
 		ret = -ENOMEM;
 		goto err_no_mem;
diff --git a/drivers/i2c/busses/i2c-sh7760.c b/drivers/i2c/busses/i2c-sh7760.c
index a0ccc5d009874..051b904cb35f6 100644
--- a/drivers/i2c/busses/i2c-sh7760.c
+++ b/drivers/i2c/busses/i2c-sh7760.c
@@ -443,7 +443,7 @@ static int sh7760_i2c_probe(struct platform_device *pdev)
 		goto out0;
 	}
 
-	id = kzalloc(sizeof(struct cami2c), GFP_KERNEL);
+	id = kzalloc(sizeof(*id), GFP_KERNEL);
 	if (!id) {
 		ret = -ENOMEM;
 		goto out0;
-- 
2.39.2

[PATCH 6.1 022/228] i2c: nomadik: Remove unnecessary goto label

[Greg Kroah-Hartman]

From: Andi Shyti <andi.shyti@kernel.org>

[ Upstream commit 1c5d33fff0d375e4ab7c4261dc62a286babbb4c6 ]

The err_no_mem goto label doesn't do anything. Remove it.

Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: 05f933d5f731 ("i2c: nomadik: Remove a useless call in the remove function")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-nomadik.c | 21 ++++++++-------------
 1 file changed, 8 insertions(+), 13 deletions(-)

diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 5004b9dd98563..8b9577318388e 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -971,10 +971,9 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 	u32 max_fifo_threshold = (vendor->fifodepth / 2) - 1;
 
 	dev = devm_kzalloc(&adev->dev, sizeof(*dev), GFP_KERNEL);
-	if (!dev) {
-		ret = -ENOMEM;
-		goto err_no_mem;
-	}
+	if (!dev)
+		return -ENOMEM;
+
 	dev->vendor = vendor;
 	dev->adev = adev;
 	nmk_i2c_of_probe(np, dev);
@@ -995,30 +994,27 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 
 	dev->virtbase = devm_ioremap(&adev->dev, adev->res.start,
 				resource_size(&adev->res));
-	if (!dev->virtbase) {
-		ret = -ENOMEM;
-		goto err_no_mem;
-	}
+	if (!dev->virtbase)
+		return -ENOMEM;
 
 	dev->irq = adev->irq[0];
 	ret = devm_request_irq(&adev->dev, dev->irq, i2c_irq_handler, 0,
 				DRIVER_NAME, dev);
 	if (ret) {
 		dev_err(&adev->dev, "cannot claim the irq %d\n", dev->irq);
-		goto err_no_mem;
+		return ret;
 	}
 
 	dev->clk = devm_clk_get(&adev->dev, NULL);
 	if (IS_ERR(dev->clk)) {
 		dev_err(&adev->dev, "could not get i2c clock\n");
-		ret = PTR_ERR(dev->clk);
-		goto err_no_mem;
+		return PTR_ERR(dev->clk);
 	}
 
 	ret = clk_prepare_enable(dev->clk);
 	if (ret) {
 		dev_err(&adev->dev, "can't prepare_enable clock\n");
-		goto err_no_mem;
+		return ret;
 	}
 
 	init_hw(dev);
@@ -1049,7 +1045,6 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 
  err_no_adap:
 	clk_disable_unprepare(dev->clk);
- err_no_mem:
 
 	return ret;
 }
-- 
2.39.2

[PATCH 6.1 023/228] i2c: nomadik: Use devm_clk_get_enabled()

[Greg Kroah-Hartman]

From: Andi Shyti <andi.shyti@kernel.org>

[ Upstream commit 9c7174db4cdd111e10d19eed5c36fd978a14c8a2 ]

Replace the pair of functions, devm_clk_get() and
clk_prepare_enable(), with a single function
devm_clk_get_enabled().

Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: 05f933d5f731 ("i2c: nomadik: Remove a useless call in the remove function")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-nomadik.c | 18 +++---------------
 1 file changed, 3 insertions(+), 15 deletions(-)

diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 8b9577318388e..2141ba05dfece 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -1005,18 +1005,12 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 		return ret;
 	}
 
-	dev->clk = devm_clk_get(&adev->dev, NULL);
+	dev->clk = devm_clk_get_enabled(&adev->dev, NULL);
 	if (IS_ERR(dev->clk)) {
-		dev_err(&adev->dev, "could not get i2c clock\n");
+		dev_err(&adev->dev, "could enable i2c clock\n");
 		return PTR_ERR(dev->clk);
 	}
 
-	ret = clk_prepare_enable(dev->clk);
-	if (ret) {
-		dev_err(&adev->dev, "can't prepare_enable clock\n");
-		return ret;
-	}
-
 	init_hw(dev);
 
 	adap = &dev->adap;
@@ -1037,16 +1031,11 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 
 	ret = i2c_add_adapter(adap);
 	if (ret)
-		goto err_no_adap;
+		return ret;
 
 	pm_runtime_put(&adev->dev);
 
 	return 0;
-
- err_no_adap:
-	clk_disable_unprepare(dev->clk);
-
-	return ret;
 }
 
 static void nmk_i2c_remove(struct amba_device *adev)
@@ -1060,7 +1049,6 @@ static void nmk_i2c_remove(struct amba_device *adev)
 	clear_all_interrupts(dev);
 	/* disable the controller */
 	i2c_clr_bit(dev->virtbase + I2C_CR, I2C_CR_PE);
-	clk_disable_unprepare(dev->clk);
 	release_mem_region(res->start, resource_size(res));
 }
 
-- 
2.39.2

[PATCH 6.1 024/228] i2c: nomadik: Remove a useless call in the remove function

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 05f933d5f7318b03ff2028c1704dc867ac16f2c7 ]

Since commit 235602146ec9 ("i2c-nomadik: turn the platform driver to an amba
driver"), there is no more request_mem_region() call in this driver.

So remove the release_mem_region() call from the remove function which is
likely a left over.

Fixes: 235602146ec9 ("i2c-nomadik: turn the platform driver to an amba driver")
Cc: <stable@vger.kernel.org> # v3.6+
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-nomadik.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 2141ba05dfece..9c5d66bd6dc1c 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -1040,7 +1040,6 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 
 static void nmk_i2c_remove(struct amba_device *adev)
 {
-	struct resource *res = &adev->res;
 	struct nmk_i2c_dev *dev = amba_get_drvdata(adev);
 
 	i2c_del_adapter(&dev->adap);
@@ -1049,7 +1048,6 @@ static void nmk_i2c_remove(struct amba_device *adev)
 	clear_all_interrupts(dev);
 	/* disable the controller */
 	i2c_clr_bit(dev->virtbase + I2C_CR, I2C_CR_PE);
-	release_mem_region(res->start, resource_size(res));
 }
 
 static struct i2c_vendor_data vendor_stn8815 = {
-- 
2.39.2

[PATCH 6.1 025/228] MIPS: Loongson: Move arch cflags to MIPS top level Makefile

[Greg Kroah-Hartman]

From: Jiaxun Yang <jiaxun.yang@flygoat.com>

[ Upstream commit 194a835210521282ad31e8f7047556318611f596 ]

Arch cflags should be independent to Platform.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Stable-dep-of: 531b3d1195d0 ("MIPS: Loongson: Fix build error when make modules_install")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/Makefile             | 38 ++++++++++++++++++++++++++++++++++
 arch/mips/loongson2ef/Platform | 35 -------------------------------
 arch/mips/loongson64/Platform  | 16 --------------
 3 files changed, 38 insertions(+), 51 deletions(-)

diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 85d3c3b4b7bdc..ca457f19f7fe0 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -190,9 +190,47 @@ endif
 cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1
 cflags-$(CONFIG_CPU_BMIPS)	+= -march=mips32 -Wa,-mips32 -Wa,--trap
 
+cflags-$(CONFIG_CPU_LOONGSON2E) += -march=loongson2e -Wa,--trap
+cflags-$(CONFIG_CPU_LOONGSON2F) += -march=loongson2f -Wa,--trap
+# Some -march= flags enable MMI instructions, and GCC complains about that
+# support being enabled alongside -msoft-float. Thus explicitly disable MMI.
+cflags-$(CONFIG_CPU_LOONGSON2EF) += $(call cc-option,-mno-loongson-mmi)
+ifdef CONFIG_CPU_LOONGSON64
+cflags-$(CONFIG_CPU_LOONGSON64)	+= -Wa,--trap
+cflags-$(CONFIG_CC_IS_GCC) += -march=loongson3a
+cflags-$(CONFIG_CC_IS_CLANG) += -march=mips64r2
+endif
+cflags-$(CONFIG_CPU_LOONGSON64) += $(call cc-option,-mno-loongson-mmi)
+
 cflags-$(CONFIG_CPU_R4000_WORKAROUNDS)	+= $(call cc-option,-mfix-r4000,)
 cflags-$(CONFIG_CPU_R4400_WORKAROUNDS)	+= $(call cc-option,-mfix-r4400,)
 cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS)	+= $(call cc-option,-mno-daddi,)
+ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
+cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa,-mfix-loongson2f-nop
+cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa,-mfix-loongson2f-jump
+endif
+
+#
+# Some versions of binutils, not currently mainline as of 2019/02/04, support
+# an -mfix-loongson3-llsc flag which emits a sync prior to each ll instruction
+# to work around a CPU bug (see __SYNC_loongson3_war in asm/sync.h for a
+# description).
+#
+# We disable this in order to prevent the assembler meddling with the
+# instruction that labels refer to, ie. if we label an ll instruction:
+#
+# 1: ll v0, 0(a0)
+#
+# ...then with the assembler fix applied the label may actually point at a sync
+# instruction inserted by the assembler, and if we were using the label in an
+# exception table the table would no longer contain the address of the ll
+# instruction.
+#
+# Avoid this by explicitly disabling that assembler behaviour. If upstream
+# binutils does not merge support for the flag then we can revisit & remove
+# this later - for now it ensures vendor toolchains don't cause problems.
+#
+cflags-$(CONFIG_CPU_LOONGSON64)	+= $(call as-option,-Wa$(comma)-mno-fix-loongson3-llsc,)
 
 # For smartmips configurations, there are hundreds of warnings due to ISA overrides
 # in assembly and header files. smartmips is only supported for MIPS32r1 onwards
diff --git a/arch/mips/loongson2ef/Platform b/arch/mips/loongson2ef/Platform
index c6f7a4b959978..d446b705fba47 100644
--- a/arch/mips/loongson2ef/Platform
+++ b/arch/mips/loongson2ef/Platform
@@ -2,41 +2,6 @@
 # Loongson Processors' Support
 #
 
-cflags-$(CONFIG_CPU_LOONGSON2EF)	+= -Wa,--trap
-cflags-$(CONFIG_CPU_LOONGSON2E) += -march=loongson2e
-cflags-$(CONFIG_CPU_LOONGSON2F) += -march=loongson2f
-#
-# Some versions of binutils, not currently mainline as of 2019/02/04, support
-# an -mfix-loongson3-llsc flag which emits a sync prior to each ll instruction
-# to work around a CPU bug (see __SYNC_loongson3_war in asm/sync.h for a
-# description).
-#
-# We disable this in order to prevent the assembler meddling with the
-# instruction that labels refer to, ie. if we label an ll instruction:
-#
-# 1: ll v0, 0(a0)
-#
-# ...then with the assembler fix applied the label may actually point at a sync
-# instruction inserted by the assembler, and if we were using the label in an
-# exception table the table would no longer contain the address of the ll
-# instruction.
-#
-# Avoid this by explicitly disabling that assembler behaviour. If upstream
-# binutils does not merge support for the flag then we can revisit & remove
-# this later - for now it ensures vendor toolchains don't cause problems.
-#
-cflags-$(CONFIG_CPU_LOONGSON2EF)	+= $(call cc-option,-Wa$(comma)-mno-fix-loongson3-llsc,)
-
-# Enable the workarounds for Loongson2f
-ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
-cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa,-mfix-loongson2f-nop
-cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa,-mfix-loongson2f-jump
-endif
-
-# Some -march= flags enable MMI instructions, and GCC complains about that
-# support being enabled alongside -msoft-float. Thus explicitly disable MMI.
-cflags-y += $(call cc-option,-mno-loongson-mmi)
-
 #
 # Loongson Machines' Support
 #
diff --git a/arch/mips/loongson64/Platform b/arch/mips/loongson64/Platform
index 473404cae1c44..49c9889e3d563 100644
--- a/arch/mips/loongson64/Platform
+++ b/arch/mips/loongson64/Platform
@@ -1,19 +1,3 @@
-#
-# Loongson Processors' Support
-#
-
-
-cflags-$(CONFIG_CPU_LOONGSON64)	+= -Wa,--trap
-
-ifdef CONFIG_CPU_LOONGSON64
-cflags-$(CONFIG_CC_IS_GCC) += -march=loongson3a
-cflags-$(CONFIG_CC_IS_CLANG) += -march=mips64r2
-endif
-
-# Some -march= flags enable MMI instructions, and GCC complains about that
-# support being enabled alongside -msoft-float. Thus explicitly disable MMI.
-cflags-y += $(call cc-option,-mno-loongson-mmi)
-
 #
 # Loongson Machines' Support
 #
-- 
2.39.2

[PATCH 6.1 026/228] MIPS: Loongson: Fix build error when make modules_install

[Greg Kroah-Hartman]

From: Huacai Chen <chenhuacai@loongson.cn>

[ Upstream commit 531b3d1195d096f14e030c4b01ec3a53b80276bf ]

After commit 0e96ea5c3eb5904e5dc2f ("MIPS: Loongson64: Clean up use of
cc-ifversion") we get a build error when make modules_install:

cc1: error: '-mloongson-mmi' must be used with '-mhard-float'

The reason is when make modules_install, 'call cc-option' doesn't work
in $(KBUILD_CFLAGS) of 'CHECKFLAGS'. Then there is no -mno-loongson-mmi
applied and -march=loongson3a enable MMI instructions.

To be detail, the error message comes from the CHECKFLAGS invocation of
$(CC) but it has no impact on the final result of make modules_install,
it is purely a cosmetic issue. The error occurs because cc-option is
defined in scripts/Makefile.compiler, which is not included in Makefile
when running 'make modules_install', as install targets are not supposed
to require the compiler; see commit 805b2e1d427aab4b ("kbuild: include
Makefile.compiler only when compiler is needed"). As a result, the call
to check for '-mno-loongson-mmi' just never happens.

Fix this by partially reverting to the old logic, use 'call cc-option'
to conditionally apply -march=loongson3a and -march=mips64r2.

By the way, Loongson-2E/2F is also broken in commit 13ceb48bc19c563e05f4
("MIPS: Loongson2ef: Remove unnecessary {as,cc}-option calls") so fix it
together.

Fixes: 13ceb48bc19c563e05f4 ("MIPS: Loongson2ef: Remove unnecessary {as,cc}-option calls")
Fixes: 0e96ea5c3eb5904e5dc2 ("MIPS: Loongson64: Clean up use of cc-ifversion")
Cc: stable@vger.kernel.org
Cc: Feiyang Chen <chenfeiyang@loongson.cn>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/Makefile | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index ca457f19f7fe0..fe64ad43ba882 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -190,16 +190,12 @@ endif
 cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1
 cflags-$(CONFIG_CPU_BMIPS)	+= -march=mips32 -Wa,-mips32 -Wa,--trap
 
-cflags-$(CONFIG_CPU_LOONGSON2E) += -march=loongson2e -Wa,--trap
-cflags-$(CONFIG_CPU_LOONGSON2F) += -march=loongson2f -Wa,--trap
+cflags-$(CONFIG_CPU_LOONGSON2E) += $(call cc-option,-march=loongson2e) -Wa,--trap
+cflags-$(CONFIG_CPU_LOONGSON2F) += $(call cc-option,-march=loongson2f) -Wa,--trap
+cflags-$(CONFIG_CPU_LOONGSON64) += $(call cc-option,-march=loongson3a,-march=mips64r2) -Wa,--trap
 # Some -march= flags enable MMI instructions, and GCC complains about that
 # support being enabled alongside -msoft-float. Thus explicitly disable MMI.
 cflags-$(CONFIG_CPU_LOONGSON2EF) += $(call cc-option,-mno-loongson-mmi)
-ifdef CONFIG_CPU_LOONGSON64
-cflags-$(CONFIG_CPU_LOONGSON64)	+= -Wa,--trap
-cflags-$(CONFIG_CC_IS_GCC) += -march=loongson3a
-cflags-$(CONFIG_CC_IS_CLANG) += -march=mips64r2
-endif
 cflags-$(CONFIG_CPU_LOONGSON64) += $(call cc-option,-mno-loongson-mmi)
 
 cflags-$(CONFIG_CPU_R4000_WORKAROUNDS)	+= $(call cc-option,-mfix-r4000,)
-- 
2.39.2

[PATCH 6.1 027/228] PCI/ASPM: Return 0 or -ETIMEDOUT from pcie_retrain_link()

[Greg Kroah-Hartman]

From: Bjorn Helgaas <bhelgaas@google.com>

[ Upstream commit f5297a01ee805d7fa569d288ed65fc0f9ac9b03d ]

"pcie_retrain_link" is not a question with a true/false answer, so "bool"
isn't quite the right return type.  Return 0 for success or -ETIMEDOUT if
the retrain failed.  No functional change intended.

[bhelgaas: based on Ilpo's patch below]
Link: https://lore.kernel.org/r/20230502083923.34562-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Stable-dep-of: e7e39756363a ("PCI/ASPM: Avoid link retraining race")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pcie/aspm.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 74b8183c305df..96e7031a3b56f 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -193,7 +193,7 @@ static void pcie_clkpm_cap_init(struct pcie_link_state *link, int blacklist)
 	link->clkpm_disable = blacklist ? 1 : 0;
 }
 
-static bool pcie_retrain_link(struct pcie_link_state *link)
+static int pcie_retrain_link(struct pcie_link_state *link)
 {
 	struct pci_dev *parent = link->pdev;
 	unsigned long end_jiffies;
@@ -220,7 +220,9 @@ static bool pcie_retrain_link(struct pcie_link_state *link)
 			break;
 		msleep(1);
 	} while (time_before(jiffies, end_jiffies));
-	return !(reg16 & PCI_EXP_LNKSTA_LT);
+	if (reg16 & PCI_EXP_LNKSTA_LT)
+		return -ETIMEDOUT;
+	return 0;
 }
 
 /*
@@ -289,15 +291,15 @@ static void pcie_aspm_configure_common_clock(struct pcie_link_state *link)
 		reg16 &= ~PCI_EXP_LNKCTL_CCC;
 	pcie_capability_write_word(parent, PCI_EXP_LNKCTL, reg16);
 
-	if (pcie_retrain_link(link))
-		return;
+	if (pcie_retrain_link(link)) {
 
-	/* Training failed. Restore common clock configurations */
-	pci_err(parent, "ASPM: Could not configure common clock\n");
-	list_for_each_entry(child, &linkbus->devices, bus_list)
-		pcie_capability_write_word(child, PCI_EXP_LNKCTL,
+		/* Training failed. Restore common clock configurations */
+		pci_err(parent, "ASPM: Could not configure common clock\n");
+		list_for_each_entry(child, &linkbus->devices, bus_list)
+			pcie_capability_write_word(child, PCI_EXP_LNKCTL,
 					   child_reg[PCI_FUNC(child->devfn)]);
-	pcie_capability_write_word(parent, PCI_EXP_LNKCTL, parent_reg);
+		pcie_capability_write_word(parent, PCI_EXP_LNKCTL, parent_reg);
+	}
 }
 
 /* Convert L0s latency encoding to ns */
-- 
2.39.2

[PATCH 6.1 028/228] PCI/ASPM: Factor out pcie_wait_for_retrain()

[Greg Kroah-Hartman]

From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

[ Upstream commit 9c7f136433d26592cb4d9cd00b4e15c33d9797c6 ]

Factor pcie_wait_for_retrain() out from pcie_retrain_link().  No functional
change intended.

[bhelgaas: split out from
https: //lore.kernel.org/r/20230502083923.34562-1-ilpo.jarvinen@linux.intel.com]
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Stable-dep-of: e7e39756363a ("PCI/ASPM: Avoid link retraining race")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pcie/aspm.c | 30 ++++++++++++++++++------------
 1 file changed, 18 insertions(+), 12 deletions(-)

diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 96e7031a3b56f..f6b91252bebc2 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -193,10 +193,26 @@ static void pcie_clkpm_cap_init(struct pcie_link_state *link, int blacklist)
 	link->clkpm_disable = blacklist ? 1 : 0;
 }
 
+static int pcie_wait_for_retrain(struct pci_dev *pdev)
+{
+	unsigned long end_jiffies;
+	u16 reg16;
+
+	/* Wait for Link Training to be cleared by hardware */
+	end_jiffies = jiffies + LINK_RETRAIN_TIMEOUT;
+	do {
+		pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &reg16);
+		if (!(reg16 & PCI_EXP_LNKSTA_LT))
+			return 0;
+		msleep(1);
+	} while (time_before(jiffies, end_jiffies));
+
+	return -ETIMEDOUT;
+}
+
 static int pcie_retrain_link(struct pcie_link_state *link)
 {
 	struct pci_dev *parent = link->pdev;
-	unsigned long end_jiffies;
 	u16 reg16;
 
 	pcie_capability_read_word(parent, PCI_EXP_LNKCTL, &reg16);
@@ -212,17 +228,7 @@ static int pcie_retrain_link(struct pcie_link_state *link)
 		pcie_capability_write_word(parent, PCI_EXP_LNKCTL, reg16);
 	}
 
-	/* Wait for link training end. Break out after waiting for timeout */
-	end_jiffies = jiffies + LINK_RETRAIN_TIMEOUT;
-	do {
-		pcie_capability_read_word(parent, PCI_EXP_LNKSTA, &reg16);
-		if (!(reg16 & PCI_EXP_LNKSTA_LT))
-			break;
-		msleep(1);
-	} while (time_before(jiffies, end_jiffies));
-	if (reg16 & PCI_EXP_LNKSTA_LT)
-		return -ETIMEDOUT;
-	return 0;
+	return pcie_wait_for_retrain(parent);
 }
 
 /*
-- 
2.39.2

[PATCH 6.1 029/228] PCI/ASPM: Avoid link retraining race

[Greg Kroah-Hartman]

From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

[ Upstream commit e7e39756363ad5bd83ddeae1063193d0f13870fd ]

PCIe r6.0.1, sec 7.5.3.7, recommends setting the link control parameters,
then waiting for the Link Training bit to be clear before setting the
Retrain Link bit.

This avoids a race where the LTSSM may not use the updated parameters if it
is already in the midst of link training because of other normal link
activity.

Wait for the Link Training bit to be clear before toggling the Retrain Link
bit to ensure that the LTSSM uses the updated link control parameters.

[bhelgaas: commit log, return 0 (success)/-ETIMEDOUT instead of bool for
both pcie_wait_for_retrain() and the existing pcie_retrain_link()]
Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: 7d715a6c1ae5 ("PCI: add PCI Express ASPM support")
Link: https://lore.kernel.org/r/20230502083923.34562-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pcie/aspm.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index f6b91252bebc2..07166a4ec27ad 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -213,8 +213,19 @@ static int pcie_wait_for_retrain(struct pci_dev *pdev)
 static int pcie_retrain_link(struct pcie_link_state *link)
 {
 	struct pci_dev *parent = link->pdev;
+	int rc;
 	u16 reg16;
 
+	/*
+	 * Ensure the updated LNKCTL parameters are used during link
+	 * training by checking that there is no ongoing link training to
+	 * avoid LTSSM race as recommended in Implementation Note at the
+	 * end of PCIe r6.0.1 sec 7.5.3.7.
+	 */
+	rc = pcie_wait_for_retrain(parent);
+	if (rc)
+		return rc;
+
 	pcie_capability_read_word(parent, PCI_EXP_LNKCTL, &reg16);
 	reg16 |= PCI_EXP_LNKCTL_RL;
 	pcie_capability_write_word(parent, PCI_EXP_LNKCTL, reg16);
-- 
2.39.2

[PATCH 6.1 030/228] PCI: rockchip: Remove writes to unused registers

[Greg Kroah-Hartman]

From: Rick Wertenbroek <rick.wertenbroek@gmail.com>

[ Upstream commit 92a9c57c325dd51682d428ba960d961fec3c8a08 ]

Remove write accesses to registers that are marked "unused" (and
therefore read-only) in the technical reference manual (TRM)
(see RK3399 TRM 17.6.8.1)

Link: https://lore.kernel.org/r/20230418074700.1083505-2-rick.wertenbroek@gmail.com
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Stable-dep-of: dc73ed0f1b8b ("PCI: rockchip: Fix window mapping and address translation for endpoint")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pcie-rockchip-ep.c | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/drivers/pci/controller/pcie-rockchip-ep.c b/drivers/pci/controller/pcie-rockchip-ep.c
index 827d91e73efab..9e17f3dba743a 100644
--- a/drivers/pci/controller/pcie-rockchip-ep.c
+++ b/drivers/pci/controller/pcie-rockchip-ep.c
@@ -61,10 +61,6 @@ static void rockchip_pcie_clear_ep_ob_atu(struct rockchip_pcie *rockchip,
 			    ROCKCHIP_PCIE_AT_OB_REGION_DESC0(region));
 	rockchip_pcie_write(rockchip, 0,
 			    ROCKCHIP_PCIE_AT_OB_REGION_DESC1(region));
-	rockchip_pcie_write(rockchip, 0,
-			    ROCKCHIP_PCIE_AT_OB_REGION_CPU_ADDR0(region));
-	rockchip_pcie_write(rockchip, 0,
-			    ROCKCHIP_PCIE_AT_OB_REGION_CPU_ADDR1(region));
 }
 
 static void rockchip_pcie_prog_ep_ob_atu(struct rockchip_pcie *rockchip, u8 fn,
@@ -114,12 +110,6 @@ static void rockchip_pcie_prog_ep_ob_atu(struct rockchip_pcie *rockchip, u8 fn,
 		     PCIE_CORE_OB_REGION_ADDR0_LO_ADDR);
 		addr1 = upper_32_bits(cpu_addr);
 	}
-
-	/* CPU bus address region */
-	rockchip_pcie_write(rockchip, addr0,
-			    ROCKCHIP_PCIE_AT_OB_REGION_CPU_ADDR0(r));
-	rockchip_pcie_write(rockchip, addr1,
-			    ROCKCHIP_PCIE_AT_OB_REGION_CPU_ADDR1(r));
 }
 
 static int rockchip_pcie_ep_write_header(struct pci_epc *epc, u8 fn, u8 vfn,
-- 
2.39.2

[PATCH 6.1 031/228] PCI: rockchip: Fix window mapping and address translation for endpoint

[Greg Kroah-Hartman]

From: Rick Wertenbroek <rick.wertenbroek@gmail.com>

[ Upstream commit dc73ed0f1b8bddd7f2bf70d123e68ffc99ad71ce ]

The RK3399 PCI endpoint core has 33 windows for PCIe space, now in the
driver up to 32 fixed size (1M) windows are used and pages are allocated
and mapped accordingly. The driver first used a single window and allocated
space inside which caused translation issues (between CPU space and PCI
space) because a window can only have a single translation at a given
time, which if multiple pages are allocated inside will cause conflicts.
Now each window is a single region of 1M which will always guarantee that
the translation is not in conflict.

Set the translation register addresses for physical function. As documented
in the technical reference manual (TRM) section 17.5.5 "PCIe Address
Translation" and section 17.6.8 "Address Translation Registers Description"

Link: https://lore.kernel.org/r/20230418074700.1083505-9-rick.wertenbroek@gmail.com
Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pcie-rockchip-ep.c | 128 ++++++++++------------
 drivers/pci/controller/pcie-rockchip.h    |  35 +++---
 2 files changed, 75 insertions(+), 88 deletions(-)

diff --git a/drivers/pci/controller/pcie-rockchip-ep.c b/drivers/pci/controller/pcie-rockchip-ep.c
index 9e17f3dba743a..3d6f828d29fc2 100644
--- a/drivers/pci/controller/pcie-rockchip-ep.c
+++ b/drivers/pci/controller/pcie-rockchip-ep.c
@@ -64,52 +64,29 @@ static void rockchip_pcie_clear_ep_ob_atu(struct rockchip_pcie *rockchip,
 }
 
 static void rockchip_pcie_prog_ep_ob_atu(struct rockchip_pcie *rockchip, u8 fn,
-					 u32 r, u32 type, u64 cpu_addr,
-					 u64 pci_addr, size_t size)
+					 u32 r, u64 cpu_addr, u64 pci_addr,
+					 size_t size)
 {
-	u64 sz = 1ULL << fls64(size - 1);
-	int num_pass_bits = ilog2(sz);
-	u32 addr0, addr1, desc0, desc1;
-	bool is_nor_msg = (type == AXI_WRAPPER_NOR_MSG);
+	int num_pass_bits = fls64(size - 1);
+	u32 addr0, addr1, desc0;
 
-	/* The minimal region size is 1MB */
 	if (num_pass_bits < 8)
 		num_pass_bits = 8;
 
-	cpu_addr -= rockchip->mem_res->start;
-	addr0 = ((is_nor_msg ? 0x10 : (num_pass_bits - 1)) &
-		PCIE_CORE_OB_REGION_ADDR0_NUM_BITS) |
-		(lower_32_bits(cpu_addr) & PCIE_CORE_OB_REGION_ADDR0_LO_ADDR);
-	addr1 = upper_32_bits(is_nor_msg ? cpu_addr : pci_addr);
-	desc0 = ROCKCHIP_PCIE_AT_OB_REGION_DESC0_DEVFN(fn) | type;
-	desc1 = 0;
-
-	if (is_nor_msg) {
-		rockchip_pcie_write(rockchip, 0,
-				    ROCKCHIP_PCIE_AT_OB_REGION_PCI_ADDR0(r));
-		rockchip_pcie_write(rockchip, 0,
-				    ROCKCHIP_PCIE_AT_OB_REGION_PCI_ADDR1(r));
-		rockchip_pcie_write(rockchip, desc0,
-				    ROCKCHIP_PCIE_AT_OB_REGION_DESC0(r));
-		rockchip_pcie_write(rockchip, desc1,
-				    ROCKCHIP_PCIE_AT_OB_REGION_DESC1(r));
-	} else {
-		/* PCI bus address region */
-		rockchip_pcie_write(rockchip, addr0,
-				    ROCKCHIP_PCIE_AT_OB_REGION_PCI_ADDR0(r));
-		rockchip_pcie_write(rockchip, addr1,
-				    ROCKCHIP_PCIE_AT_OB_REGION_PCI_ADDR1(r));
-		rockchip_pcie_write(rockchip, desc0,
-				    ROCKCHIP_PCIE_AT_OB_REGION_DESC0(r));
-		rockchip_pcie_write(rockchip, desc1,
-				    ROCKCHIP_PCIE_AT_OB_REGION_DESC1(r));
-
-		addr0 =
-		    ((num_pass_bits - 1) & PCIE_CORE_OB_REGION_ADDR0_NUM_BITS) |
-		    (lower_32_bits(cpu_addr) &
-		     PCIE_CORE_OB_REGION_ADDR0_LO_ADDR);
-		addr1 = upper_32_bits(cpu_addr);
-	}
+	addr0 = ((num_pass_bits - 1) & PCIE_CORE_OB_REGION_ADDR0_NUM_BITS) |
+		(lower_32_bits(pci_addr) & PCIE_CORE_OB_REGION_ADDR0_LO_ADDR);
+	addr1 = upper_32_bits(pci_addr);
+	desc0 = ROCKCHIP_PCIE_AT_OB_REGION_DESC0_DEVFN(fn) | AXI_WRAPPER_MEM_WRITE;
+
+	/* PCI bus address region */
+	rockchip_pcie_write(rockchip, addr0,
+			    ROCKCHIP_PCIE_AT_OB_REGION_PCI_ADDR0(r));
+	rockchip_pcie_write(rockchip, addr1,
+			    ROCKCHIP_PCIE_AT_OB_REGION_PCI_ADDR1(r));
+	rockchip_pcie_write(rockchip, desc0,
+			    ROCKCHIP_PCIE_AT_OB_REGION_DESC0(r));
+	rockchip_pcie_write(rockchip, 0,
+			    ROCKCHIP_PCIE_AT_OB_REGION_DESC1(r));
 }
 
 static int rockchip_pcie_ep_write_header(struct pci_epc *epc, u8 fn, u8 vfn,
@@ -248,26 +225,20 @@ static void rockchip_pcie_ep_clear_bar(struct pci_epc *epc, u8 fn, u8 vfn,
 			    ROCKCHIP_PCIE_AT_IB_EP_FUNC_BAR_ADDR1(fn, bar));
 }
 
+static inline u32 rockchip_ob_region(phys_addr_t addr)
+{
+	return (addr >> ilog2(SZ_1M)) & 0x1f;
+}
+
 static int rockchip_pcie_ep_map_addr(struct pci_epc *epc, u8 fn, u8 vfn,
 				     phys_addr_t addr, u64 pci_addr,
 				     size_t size)
 {
 	struct rockchip_pcie_ep *ep = epc_get_drvdata(epc);
 	struct rockchip_pcie *pcie = &ep->rockchip;
-	u32 r;
+	u32 r = rockchip_ob_region(addr);
 
-	r = find_first_zero_bit(&ep->ob_region_map, BITS_PER_LONG);
-	/*
-	 * Region 0 is reserved for configuration space and shouldn't
-	 * be used elsewhere per TRM, so leave it out.
-	 */
-	if (r >= ep->max_regions - 1) {
-		dev_err(&epc->dev, "no free outbound region\n");
-		return -EINVAL;
-	}
-
-	rockchip_pcie_prog_ep_ob_atu(pcie, fn, r, AXI_WRAPPER_MEM_WRITE, addr,
-				     pci_addr, size);
+	rockchip_pcie_prog_ep_ob_atu(pcie, fn, r, addr, pci_addr, size);
 
 	set_bit(r, &ep->ob_region_map);
 	ep->ob_addr[r] = addr;
@@ -282,15 +253,11 @@ static void rockchip_pcie_ep_unmap_addr(struct pci_epc *epc, u8 fn, u8 vfn,
 	struct rockchip_pcie *rockchip = &ep->rockchip;
 	u32 r;
 
-	for (r = 0; r < ep->max_regions - 1; r++)
+	for (r = 0; r < ep->max_regions; r++)
 		if (ep->ob_addr[r] == addr)
 			break;
 
-	/*
-	 * Region 0 is reserved for configuration space and shouldn't
-	 * be used elsewhere per TRM, so leave it out.
-	 */
-	if (r == ep->max_regions - 1)
+	if (r == ep->max_regions)
 		return;
 
 	rockchip_pcie_clear_ep_ob_atu(rockchip, r);
@@ -387,7 +354,8 @@ static int rockchip_pcie_ep_send_msi_irq(struct rockchip_pcie_ep *ep, u8 fn,
 	struct rockchip_pcie *rockchip = &ep->rockchip;
 	u32 flags, mme, data, data_mask;
 	u8 msi_count;
-	u64 pci_addr, pci_addr_mask = 0xff;
+	u64 pci_addr;
+	u32 r;
 
 	/* Check MSI enable bit */
 	flags = rockchip_pcie_read(&ep->rockchip,
@@ -421,21 +389,20 @@ static int rockchip_pcie_ep_send_msi_irq(struct rockchip_pcie_ep *ep, u8 fn,
 				       ROCKCHIP_PCIE_EP_FUNC_BASE(fn) +
 				       ROCKCHIP_PCIE_EP_MSI_CTRL_REG +
 				       PCI_MSI_ADDRESS_LO);
-	pci_addr &= GENMASK_ULL(63, 2);
 
 	/* Set the outbound region if needed. */
-	if (unlikely(ep->irq_pci_addr != (pci_addr & ~pci_addr_mask) ||
+	if (unlikely(ep->irq_pci_addr != (pci_addr & PCIE_ADDR_MASK) ||
 		     ep->irq_pci_fn != fn)) {
-		rockchip_pcie_prog_ep_ob_atu(rockchip, fn, ep->max_regions - 1,
-					     AXI_WRAPPER_MEM_WRITE,
+		r = rockchip_ob_region(ep->irq_phys_addr);
+		rockchip_pcie_prog_ep_ob_atu(rockchip, fn, r,
 					     ep->irq_phys_addr,
-					     pci_addr & ~pci_addr_mask,
-					     pci_addr_mask + 1);
-		ep->irq_pci_addr = (pci_addr & ~pci_addr_mask);
+					     pci_addr & PCIE_ADDR_MASK,
+					     ~PCIE_ADDR_MASK + 1);
+		ep->irq_pci_addr = (pci_addr & PCIE_ADDR_MASK);
 		ep->irq_pci_fn = fn;
 	}
 
-	writew(data, ep->irq_cpu_addr + (pci_addr & pci_addr_mask));
+	writew(data, ep->irq_cpu_addr + (pci_addr & ~PCIE_ADDR_MASK));
 	return 0;
 }
 
@@ -517,6 +484,8 @@ static int rockchip_pcie_parse_ep_dt(struct rockchip_pcie *rockchip,
 	if (err < 0 || ep->max_regions > MAX_REGION_LIMIT)
 		ep->max_regions = MAX_REGION_LIMIT;
 
+	ep->ob_region_map = 0;
+
 	err = of_property_read_u8(dev->of_node, "max-functions",
 				  &ep->epc->max_functions);
 	if (err < 0)
@@ -537,7 +506,8 @@ static int rockchip_pcie_ep_probe(struct platform_device *pdev)
 	struct rockchip_pcie *rockchip;
 	struct pci_epc *epc;
 	size_t max_regions;
-	int err;
+	struct pci_epc_mem_window *windows = NULL;
+	int err, i;
 
 	ep = devm_kzalloc(dev, sizeof(*ep), GFP_KERNEL);
 	if (!ep)
@@ -584,15 +554,27 @@ static int rockchip_pcie_ep_probe(struct platform_device *pdev)
 	/* Only enable function 0 by default */
 	rockchip_pcie_write(rockchip, BIT(0), PCIE_CORE_PHY_FUNC_CFG);
 
-	err = pci_epc_mem_init(epc, rockchip->mem_res->start,
-			       resource_size(rockchip->mem_res), PAGE_SIZE);
+	windows = devm_kcalloc(dev, ep->max_regions,
+			       sizeof(struct pci_epc_mem_window), GFP_KERNEL);
+	if (!windows) {
+		err = -ENOMEM;
+		goto err_uninit_port;
+	}
+	for (i = 0; i < ep->max_regions; i++) {
+		windows[i].phys_base = rockchip->mem_res->start + (SZ_1M * i);
+		windows[i].size = SZ_1M;
+		windows[i].page_size = SZ_1M;
+	}
+	err = pci_epc_multi_mem_init(epc, windows, ep->max_regions);
+	devm_kfree(dev, windows);
+
 	if (err < 0) {
 		dev_err(dev, "failed to initialize the memory space\n");
 		goto err_uninit_port;
 	}
 
 	ep->irq_cpu_addr = pci_epc_mem_alloc_addr(epc, &ep->irq_phys_addr,
-						  SZ_128K);
+						  SZ_1M);
 	if (!ep->irq_cpu_addr) {
 		dev_err(dev, "failed to reserve memory space for MSI\n");
 		err = -ENOMEM;
diff --git a/drivers/pci/controller/pcie-rockchip.h b/drivers/pci/controller/pcie-rockchip.h
index 8e92dc3339ecc..501d859420b4c 100644
--- a/drivers/pci/controller/pcie-rockchip.h
+++ b/drivers/pci/controller/pcie-rockchip.h
@@ -139,6 +139,7 @@
 
 #define PCIE_RC_RP_ATS_BASE		0x400000
 #define PCIE_RC_CONFIG_NORMAL_BASE	0x800000
+#define PCIE_EP_PF_CONFIG_REGS_BASE	0x800000
 #define PCIE_RC_CONFIG_BASE		0xa00000
 #define PCIE_EP_CONFIG_BASE		0xa00000
 #define PCIE_EP_CONFIG_DID_VID		(PCIE_EP_CONFIG_BASE + 0x00)
@@ -157,10 +158,11 @@
 #define PCIE_RC_CONFIG_THP_CAP		(PCIE_RC_CONFIG_BASE + 0x274)
 #define   PCIE_RC_CONFIG_THP_CAP_NEXT_MASK	GENMASK(31, 20)
 
+#define PCIE_ADDR_MASK			0xffffff00
 #define PCIE_CORE_AXI_CONF_BASE		0xc00000
 #define PCIE_CORE_OB_REGION_ADDR0	(PCIE_CORE_AXI_CONF_BASE + 0x0)
 #define   PCIE_CORE_OB_REGION_ADDR0_NUM_BITS	0x3f
-#define   PCIE_CORE_OB_REGION_ADDR0_LO_ADDR	0xffffff00
+#define   PCIE_CORE_OB_REGION_ADDR0_LO_ADDR	PCIE_ADDR_MASK
 #define PCIE_CORE_OB_REGION_ADDR1	(PCIE_CORE_AXI_CONF_BASE + 0x4)
 #define PCIE_CORE_OB_REGION_DESC0	(PCIE_CORE_AXI_CONF_BASE + 0x8)
 #define PCIE_CORE_OB_REGION_DESC1	(PCIE_CORE_AXI_CONF_BASE + 0xc)
@@ -168,7 +170,7 @@
 #define PCIE_CORE_AXI_INBOUND_BASE	0xc00800
 #define PCIE_RP_IB_ADDR0		(PCIE_CORE_AXI_INBOUND_BASE + 0x0)
 #define   PCIE_CORE_IB_REGION_ADDR0_NUM_BITS	0x3f
-#define   PCIE_CORE_IB_REGION_ADDR0_LO_ADDR	0xffffff00
+#define   PCIE_CORE_IB_REGION_ADDR0_LO_ADDR	PCIE_ADDR_MASK
 #define PCIE_RP_IB_ADDR1		(PCIE_CORE_AXI_INBOUND_BASE + 0x4)
 
 /* Size of one AXI Region (not Region 0) */
@@ -233,13 +235,15 @@
 #define   ROCKCHIP_PCIE_EP_MSI_CTRL_ME				BIT(16)
 #define   ROCKCHIP_PCIE_EP_MSI_CTRL_MASK_MSI_CAP	BIT(24)
 #define ROCKCHIP_PCIE_EP_DUMMY_IRQ_ADDR				0x1
-#define ROCKCHIP_PCIE_EP_FUNC_BASE(fn)	(((fn) << 12) & GENMASK(19, 12))
+#define ROCKCHIP_PCIE_EP_PCI_LEGACY_IRQ_ADDR		0x3
+#define ROCKCHIP_PCIE_EP_FUNC_BASE(fn) \
+	(PCIE_EP_PF_CONFIG_REGS_BASE + (((fn) << 12) & GENMASK(19, 12)))
+#define ROCKCHIP_PCIE_EP_VIRT_FUNC_BASE(fn) \
+	(PCIE_EP_PF_CONFIG_REGS_BASE + 0x10000 + (((fn) << 12) & GENMASK(19, 12)))
 #define ROCKCHIP_PCIE_AT_IB_EP_FUNC_BAR_ADDR0(fn, bar) \
-	(PCIE_RC_RP_ATS_BASE + 0x0840 + (fn) * 0x0040 + (bar) * 0x0008)
+	(PCIE_CORE_AXI_CONF_BASE + 0x0828 + (fn) * 0x0040 + (bar) * 0x0008)
 #define ROCKCHIP_PCIE_AT_IB_EP_FUNC_BAR_ADDR1(fn, bar) \
-	(PCIE_RC_RP_ATS_BASE + 0x0844 + (fn) * 0x0040 + (bar) * 0x0008)
-#define ROCKCHIP_PCIE_AT_OB_REGION_PCI_ADDR0(r) \
-	(PCIE_RC_RP_ATS_BASE + 0x0000 + ((r) & 0x1f) * 0x0020)
+	(PCIE_CORE_AXI_CONF_BASE + 0x082c + (fn) * 0x0040 + (bar) * 0x0008)
 #define ROCKCHIP_PCIE_AT_OB_REGION_PCI_ADDR0_DEVFN_MASK	GENMASK(19, 12)
 #define ROCKCHIP_PCIE_AT_OB_REGION_PCI_ADDR0_DEVFN(devfn) \
 	(((devfn) << 12) & \
@@ -247,20 +251,21 @@
 #define ROCKCHIP_PCIE_AT_OB_REGION_PCI_ADDR0_BUS_MASK	GENMASK(27, 20)
 #define ROCKCHIP_PCIE_AT_OB_REGION_PCI_ADDR0_BUS(bus) \
 		(((bus) << 20) & ROCKCHIP_PCIE_AT_OB_REGION_PCI_ADDR0_BUS_MASK)
+#define PCIE_RC_EP_ATR_OB_REGIONS_1_32 (PCIE_CORE_AXI_CONF_BASE + 0x0020)
+#define ROCKCHIP_PCIE_AT_OB_REGION_PCI_ADDR0(r) \
+		(PCIE_RC_EP_ATR_OB_REGIONS_1_32 + 0x0000 + ((r) & 0x1f) * 0x0020)
 #define ROCKCHIP_PCIE_AT_OB_REGION_PCI_ADDR1(r) \
-		(PCIE_RC_RP_ATS_BASE + 0x0004 + ((r) & 0x1f) * 0x0020)
+		(PCIE_RC_EP_ATR_OB_REGIONS_1_32 + 0x0004 + ((r) & 0x1f) * 0x0020)
 #define ROCKCHIP_PCIE_AT_OB_REGION_DESC0_HARDCODED_RID	BIT(23)
 #define ROCKCHIP_PCIE_AT_OB_REGION_DESC0_DEVFN_MASK	GENMASK(31, 24)
 #define ROCKCHIP_PCIE_AT_OB_REGION_DESC0_DEVFN(devfn) \
 		(((devfn) << 24) & ROCKCHIP_PCIE_AT_OB_REGION_DESC0_DEVFN_MASK)
 #define ROCKCHIP_PCIE_AT_OB_REGION_DESC0(r) \
-		(PCIE_RC_RP_ATS_BASE + 0x0008 + ((r) & 0x1f) * 0x0020)
-#define ROCKCHIP_PCIE_AT_OB_REGION_DESC1(r)	\
-		(PCIE_RC_RP_ATS_BASE + 0x000c + ((r) & 0x1f) * 0x0020)
-#define ROCKCHIP_PCIE_AT_OB_REGION_CPU_ADDR0(r) \
-		(PCIE_RC_RP_ATS_BASE + 0x0018 + ((r) & 0x1f) * 0x0020)
-#define ROCKCHIP_PCIE_AT_OB_REGION_CPU_ADDR1(r) \
-		(PCIE_RC_RP_ATS_BASE + 0x001c + ((r) & 0x1f) * 0x0020)
+		(PCIE_RC_EP_ATR_OB_REGIONS_1_32 + 0x0008 + ((r) & 0x1f) * 0x0020)
+#define ROCKCHIP_PCIE_AT_OB_REGION_DESC1(r) \
+		(PCIE_RC_EP_ATR_OB_REGIONS_1_32 + 0x000c + ((r) & 0x1f) * 0x0020)
+#define ROCKCHIP_PCIE_AT_OB_REGION_DESC2(r) \
+		(PCIE_RC_EP_ATR_OB_REGIONS_1_32 + 0x0010 + ((r) & 0x1f) * 0x0020)
 
 #define ROCKCHIP_PCIE_CORE_EP_FUNC_BAR_CFG0(fn) \
 		(PCIE_CORE_CTRL_MGMT_BASE + 0x0240 + (fn) * 0x0008)
-- 
2.39.2

[PATCH 6.1 032/228] PCI: rockchip: Dont advertise MSI-X in PCIe capabilities

[Greg Kroah-Hartman]

From: Rick Wertenbroek <rick.wertenbroek@gmail.com>

[ Upstream commit a52587e0bee14cbeeadf48a24013828cb04b8df8 ]

The RK3399 PCIe endpoint controller cannot generate MSI-X IRQs.
This is documented in the RK3399 technical reference manual (TRM)
section 17.5.9 "Interrupt Support".

MSI-X capability should therefore not be advertised. Remove the
MSI-X capability by editing the capability linked-list. The
previous entry is the MSI capability, therefore get the next
entry from the MSI-X capability entry and set it as next entry
for the MSI capability. This in effect removes MSI-X from the list.

Linked list before : MSI cap -> MSI-X cap -> PCIe Device cap -> ...
Linked list now : MSI cap -> PCIe Device cap -> ...

Link: https://lore.kernel.org/r/20230418074700.1083505-11-rick.wertenbroek@gmail.com
Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pcie-rockchip-ep.c | 24 +++++++++++++++++++++++
 drivers/pci/controller/pcie-rockchip.h    |  5 +++++
 2 files changed, 29 insertions(+)

diff --git a/drivers/pci/controller/pcie-rockchip-ep.c b/drivers/pci/controller/pcie-rockchip-ep.c
index 3d6f828d29fc2..0af0e965fb57e 100644
--- a/drivers/pci/controller/pcie-rockchip-ep.c
+++ b/drivers/pci/controller/pcie-rockchip-ep.c
@@ -508,6 +508,7 @@ static int rockchip_pcie_ep_probe(struct platform_device *pdev)
 	size_t max_regions;
 	struct pci_epc_mem_window *windows = NULL;
 	int err, i;
+	u32 cfg_msi, cfg_msix_cp;
 
 	ep = devm_kzalloc(dev, sizeof(*ep), GFP_KERNEL);
 	if (!ep)
@@ -583,6 +584,29 @@ static int rockchip_pcie_ep_probe(struct platform_device *pdev)
 
 	ep->irq_pci_addr = ROCKCHIP_PCIE_EP_DUMMY_IRQ_ADDR;
 
+	/*
+	 * MSI-X is not supported but the controller still advertises the MSI-X
+	 * capability by default, which can lead to the Root Complex side
+	 * allocating MSI-X vectors which cannot be used. Avoid this by skipping
+	 * the MSI-X capability entry in the PCIe capabilities linked-list: get
+	 * the next pointer from the MSI-X entry and set that in the MSI
+	 * capability entry (which is the previous entry). This way the MSI-X
+	 * entry is skipped (left out of the linked-list) and not advertised.
+	 */
+	cfg_msi = rockchip_pcie_read(rockchip, PCIE_EP_CONFIG_BASE +
+				     ROCKCHIP_PCIE_EP_MSI_CTRL_REG);
+
+	cfg_msi &= ~ROCKCHIP_PCIE_EP_MSI_CP1_MASK;
+
+	cfg_msix_cp = rockchip_pcie_read(rockchip, PCIE_EP_CONFIG_BASE +
+					 ROCKCHIP_PCIE_EP_MSIX_CAP_REG) &
+					 ROCKCHIP_PCIE_EP_MSIX_CAP_CP_MASK;
+
+	cfg_msi |= cfg_msix_cp;
+
+	rockchip_pcie_write(rockchip, cfg_msi,
+			    PCIE_EP_CONFIG_BASE + ROCKCHIP_PCIE_EP_MSI_CTRL_REG);
+
 	rockchip_pcie_write(rockchip, PCIE_CLIENT_CONF_ENABLE,
 			    PCIE_CLIENT_CONFIG);
 
diff --git a/drivers/pci/controller/pcie-rockchip.h b/drivers/pci/controller/pcie-rockchip.h
index 501d859420b4c..fe0333778fd93 100644
--- a/drivers/pci/controller/pcie-rockchip.h
+++ b/drivers/pci/controller/pcie-rockchip.h
@@ -227,6 +227,8 @@
 #define ROCKCHIP_PCIE_EP_CMD_STATUS			0x4
 #define   ROCKCHIP_PCIE_EP_CMD_STATUS_IS		BIT(19)
 #define ROCKCHIP_PCIE_EP_MSI_CTRL_REG			0x90
+#define   ROCKCHIP_PCIE_EP_MSI_CP1_OFFSET		8
+#define   ROCKCHIP_PCIE_EP_MSI_CP1_MASK			GENMASK(15, 8)
 #define   ROCKCHIP_PCIE_EP_MSI_FLAGS_OFFSET		16
 #define   ROCKCHIP_PCIE_EP_MSI_CTRL_MMC_OFFSET		17
 #define   ROCKCHIP_PCIE_EP_MSI_CTRL_MMC_MASK		GENMASK(19, 17)
@@ -234,6 +236,9 @@
 #define   ROCKCHIP_PCIE_EP_MSI_CTRL_MME_MASK		GENMASK(22, 20)
 #define   ROCKCHIP_PCIE_EP_MSI_CTRL_ME				BIT(16)
 #define   ROCKCHIP_PCIE_EP_MSI_CTRL_MASK_MSI_CAP	BIT(24)
+#define ROCKCHIP_PCIE_EP_MSIX_CAP_REG			0xb0
+#define   ROCKCHIP_PCIE_EP_MSIX_CAP_CP_OFFSET		8
+#define   ROCKCHIP_PCIE_EP_MSIX_CAP_CP_MASK		GENMASK(15, 8)
 #define ROCKCHIP_PCIE_EP_DUMMY_IRQ_ADDR				0x1
 #define ROCKCHIP_PCIE_EP_PCI_LEGACY_IRQ_ADDR		0x3
 #define ROCKCHIP_PCIE_EP_FUNC_BASE(fn) \
-- 
2.39.2

[PATCH 6.1 033/228] drm/amd/display: add FB_DAMAGE_CLIPS support

[Greg Kroah-Hartman]

From: Hamza Mahfooz <hamza.mahfooz@amd.com>

[ Upstream commit 30ebe41582d1ea5a7de990319f9e593dad4886f7 ]

Currently, userspace doesn't have a way to communicate selective updates
to displays. So, enable support for FB_DAMAGE_CLIPS for DCN ASICs newer
than DCN301, convert DRM damage clips to dc dirty rectangles and fill
them into dirty_rects in fill_dc_dirty_rects().

Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 72f1de49ffb9 ("drm/dp_mst: Clear MSG_RDY flag before sending new message")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 130 +++++++++++-------
 .../amd/display/amdgpu_dm/amdgpu_dm_plane.c   |   4 +
 2 files changed, 88 insertions(+), 46 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index ce5df7927c21f..f6165edc6c433 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -4948,6 +4948,35 @@ static int fill_dc_plane_attributes(struct amdgpu_device *adev,
 	return 0;
 }
 
+static inline void fill_dc_dirty_rect(struct drm_plane *plane,
+				      struct rect *dirty_rect, int32_t x,
+				      int32_t y, int32_t width, int32_t height,
+				      int *i, bool ffu)
+{
+	if (*i > DC_MAX_DIRTY_RECTS)
+		return;
+
+	if (*i == DC_MAX_DIRTY_RECTS)
+		goto out;
+
+	dirty_rect->x = x;
+	dirty_rect->y = y;
+	dirty_rect->width = width;
+	dirty_rect->height = height;
+
+	if (ffu)
+		drm_dbg(plane->dev,
+			"[PLANE:%d] PSR FFU dirty rect size (%d, %d)\n",
+			plane->base.id, width, height);
+	else
+		drm_dbg(plane->dev,
+			"[PLANE:%d] PSR SU dirty rect at (%d, %d) size (%d, %d)",
+			plane->base.id, x, y, width, height);
+
+out:
+	(*i)++;
+}
+
 /**
  * fill_dc_dirty_rects() - Fill DC dirty regions for PSR selective updates
  *
@@ -4968,10 +4997,6 @@ static int fill_dc_plane_attributes(struct amdgpu_device *adev,
  * addition, certain use cases - such as cursor and multi-plane overlay (MPO) -
  * implicitly provide damage clips without any client support via the plane
  * bounds.
- *
- * Today, amdgpu_dm only supports the MPO and cursor usecase.
- *
- * TODO: Also enable for FB_DAMAGE_CLIPS
  */
 static void fill_dc_dirty_rects(struct drm_plane *plane,
 				struct drm_plane_state *old_plane_state,
@@ -4982,12 +5007,11 @@ static void fill_dc_dirty_rects(struct drm_plane *plane,
 	struct dm_crtc_state *dm_crtc_state = to_dm_crtc_state(crtc_state);
 	struct rect *dirty_rects = flip_addrs->dirty_rects;
 	uint32_t num_clips;
+	struct drm_mode_rect *clips;
 	bool bb_changed;
 	bool fb_changed;
 	u32 i = 0;
 
-	flip_addrs->dirty_rect_count = 0;
-
 	/*
 	 * Cursor plane has it's own dirty rect update interface. See
 	 * dcn10_dmub_update_cursor_data and dmub_cmd_update_cursor_info_data
@@ -4995,20 +5019,20 @@ static void fill_dc_dirty_rects(struct drm_plane *plane,
 	if (plane->type == DRM_PLANE_TYPE_CURSOR)
 		return;
 
-	/*
-	 * Today, we only consider MPO use-case for PSR SU. If MPO not
-	 * requested, and there is a plane update, do FFU.
-	 */
+	num_clips = drm_plane_get_damage_clips_count(new_plane_state);
+	clips = drm_plane_get_damage_clips(new_plane_state);
+
 	if (!dm_crtc_state->mpo_requested) {
-		dirty_rects[0].x = 0;
-		dirty_rects[0].y = 0;
-		dirty_rects[0].width = dm_crtc_state->base.mode.crtc_hdisplay;
-		dirty_rects[0].height = dm_crtc_state->base.mode.crtc_vdisplay;
-		flip_addrs->dirty_rect_count = 1;
-		DRM_DEBUG_DRIVER("[PLANE:%d] PSR FFU dirty rect size (%d, %d)\n",
-				 new_plane_state->plane->base.id,
-				 dm_crtc_state->base.mode.crtc_hdisplay,
-				 dm_crtc_state->base.mode.crtc_vdisplay);
+		if (!num_clips || num_clips > DC_MAX_DIRTY_RECTS)
+			goto ffu;
+
+		for (; flip_addrs->dirty_rect_count < num_clips; clips++)
+			fill_dc_dirty_rect(new_plane_state->plane,
+					   &dirty_rects[i], clips->x1,
+					   clips->y1, clips->x2 - clips->x1,
+					   clips->y2 - clips->y1,
+					   &flip_addrs->dirty_rect_count,
+					   false);
 		return;
 	}
 
@@ -5019,7 +5043,6 @@ static void fill_dc_dirty_rects(struct drm_plane *plane,
 	 * If plane is moved or resized, also add old bounding box to dirty
 	 * rects.
 	 */
-	num_clips = drm_plane_get_damage_clips_count(new_plane_state);
 	fb_changed = old_plane_state->fb->base.id !=
 		     new_plane_state->fb->base.id;
 	bb_changed = (old_plane_state->crtc_x != new_plane_state->crtc_x ||
@@ -5027,36 +5050,51 @@ static void fill_dc_dirty_rects(struct drm_plane *plane,
 		      old_plane_state->crtc_w != new_plane_state->crtc_w ||
 		      old_plane_state->crtc_h != new_plane_state->crtc_h);
 
-	DRM_DEBUG_DRIVER("[PLANE:%d] PSR bb_changed:%d fb_changed:%d num_clips:%d\n",
-			 new_plane_state->plane->base.id,
-			 bb_changed, fb_changed, num_clips);
-
-	if (num_clips || fb_changed || bb_changed) {
-		dirty_rects[i].x = new_plane_state->crtc_x;
-		dirty_rects[i].y = new_plane_state->crtc_y;
-		dirty_rects[i].width = new_plane_state->crtc_w;
-		dirty_rects[i].height = new_plane_state->crtc_h;
-		DRM_DEBUG_DRIVER("[PLANE:%d] PSR SU dirty rect at (%d, %d) size (%d, %d)\n",
-				 new_plane_state->plane->base.id,
-				 dirty_rects[i].x, dirty_rects[i].y,
-				 dirty_rects[i].width, dirty_rects[i].height);
-		i += 1;
-	}
+	drm_dbg(plane->dev,
+		"[PLANE:%d] PSR bb_changed:%d fb_changed:%d num_clips:%d\n",
+		new_plane_state->plane->base.id,
+		bb_changed, fb_changed, num_clips);
 
-	/* Add old plane bounding-box if plane is moved or resized */
 	if (bb_changed) {
-		dirty_rects[i].x = old_plane_state->crtc_x;
-		dirty_rects[i].y = old_plane_state->crtc_y;
-		dirty_rects[i].width = old_plane_state->crtc_w;
-		dirty_rects[i].height = old_plane_state->crtc_h;
-		DRM_DEBUG_DRIVER("[PLANE:%d] PSR SU dirty rect at (%d, %d) size (%d, %d)\n",
-				old_plane_state->plane->base.id,
-				dirty_rects[i].x, dirty_rects[i].y,
-				dirty_rects[i].width, dirty_rects[i].height);
-		i += 1;
-	}
+		fill_dc_dirty_rect(new_plane_state->plane, &dirty_rects[i],
+				   new_plane_state->crtc_x,
+				   new_plane_state->crtc_y,
+				   new_plane_state->crtc_w,
+				   new_plane_state->crtc_h, &i, false);
+
+		/* Add old plane bounding-box if plane is moved or resized */
+		fill_dc_dirty_rect(new_plane_state->plane, &dirty_rects[i],
+				   old_plane_state->crtc_x,
+				   old_plane_state->crtc_y,
+				   old_plane_state->crtc_w,
+				   old_plane_state->crtc_h, &i, false);
+	}
+
+	if (num_clips) {
+		for (; i < num_clips; clips++)
+			fill_dc_dirty_rect(new_plane_state->plane,
+					   &dirty_rects[i], clips->x1,
+					   clips->y1, clips->x2 - clips->x1,
+					   clips->y2 - clips->y1, &i, false);
+	} else if (fb_changed && !bb_changed) {
+		fill_dc_dirty_rect(new_plane_state->plane, &dirty_rects[i],
+				   new_plane_state->crtc_x,
+				   new_plane_state->crtc_y,
+				   new_plane_state->crtc_w,
+				   new_plane_state->crtc_h, &i, false);
+	}
+
+	if (i > DC_MAX_DIRTY_RECTS)
+		goto ffu;
 
 	flip_addrs->dirty_rect_count = i;
+	return;
+
+ffu:
+	fill_dc_dirty_rect(new_plane_state->plane, &dirty_rects[0], 0, 0,
+			   dm_crtc_state->base.mode.crtc_hdisplay,
+			   dm_crtc_state->base.mode.crtc_vdisplay,
+			   &flip_addrs->dirty_rect_count, true);
 }
 
 static void update_stream_scaling_settings(const struct drm_display_mode *mode,
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_plane.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_plane.c
index e6854f7270a66..3c50b3ff79541 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_plane.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_plane.c
@@ -1600,6 +1600,10 @@ int amdgpu_dm_plane_init(struct amdgpu_display_manager *dm,
 		drm_plane_create_rotation_property(plane, DRM_MODE_ROTATE_0,
 						   supported_rotations);
 
+	if (dm->adev->ip_versions[DCE_HWIP][0] > IP_VERSION(3, 0, 1) &&
+	    plane->type != DRM_PLANE_TYPE_CURSOR)
+		drm_plane_enable_fb_damage_clips(plane);
+
 	drm_plane_helper_add(plane, &dm_plane_helper_funcs);
 
 #ifdef CONFIG_DRM_AMD_DC_HDR
-- 
2.39.2

[PATCH 6.1 034/228] drm/amd/display: Check if link state is valid

[Greg Kroah-Hartman]

From: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>

[ Upstream commit 03ce7b387e8b0f4a1dc97a878545bdf7c7f23251 ]

The link state is set to false if there is no link and local sink. Even
though the stream state may not change, it is desirable to commit the
new stream when HPD goes low to high.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 59de751e3845 ("drm/amd/display: add ODM case when looking for first split pipe")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index cca0143444164..beb2d7f103c58 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -1517,6 +1517,8 @@ static bool context_changed(
 	for (i = 0; i < dc->current_state->stream_count; i++) {
 		if (dc->current_state->streams[i] != context->streams[i])
 			return true;
+		if (!context->streams[i]->link->link_state_valid)
+			return true;
 	}
 
 	return false;
-- 
2.39.2

[PATCH 6.1 035/228] drm/amd/display: Rework context change check

[Greg Kroah-Hartman]

From: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>

[ Upstream commit 10fdb0a11c555e0d6f7698d2874581d06e99ee71 ]

Context change is all about streams; for this reason, this commit
renames context_changed to streams_changed. Additionally, to make this
function more flexible, this commit changes the function signature to
receive the stream array and the stream count as a parameter.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 59de751e3845 ("drm/amd/display: add ODM case when looking for first split pipe")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index beb2d7f103c58..226c17e78d3e1 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -1505,19 +1505,19 @@ static void program_timing_sync(
 	}
 }
 
-static bool context_changed(
-		struct dc *dc,
-		struct dc_state *context)
+static bool streams_changed(struct dc *dc,
+			    struct dc_stream_state *streams[],
+			    uint8_t stream_count)
 {
 	uint8_t i;
 
-	if (context->stream_count != dc->current_state->stream_count)
+	if (stream_count != dc->current_state->stream_count)
 		return true;
 
 	for (i = 0; i < dc->current_state->stream_count; i++) {
-		if (dc->current_state->streams[i] != context->streams[i])
+		if (dc->current_state->streams[i] != streams[i])
 			return true;
-		if (!context->streams[i]->link->link_state_valid)
+		if (!streams[i]->link->link_state_valid)
 			return true;
 	}
 
@@ -1918,7 +1918,7 @@ bool dc_commit_state(struct dc *dc, struct dc_state *context)
 	enum dc_status result = DC_ERROR_UNEXPECTED;
 	int i;
 
-	if (!context_changed(dc, context))
+	if (!streams_changed(dc, context->streams, context->stream_count))
 		return DC_OK;
 
 	DC_LOG_DC("%s: %d streams\n",
-- 
2.39.2

[PATCH 6.1 036/228] drm/amd/display: Enable new commit sequence only for DCN32x

[Greg Kroah-Hartman]

From: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>

[ Upstream commit 7b36f4d18e3e4941d12fe027ad6ad6123c257027 ]

Change commit sequence will impact all ASICs. It is prudent to run this
update in small steps to keep issues under control and avoid any
potential regression. With this idea in mind, this commit is preparation
work for the complete transition to the new commit sequence. To maintain
this change manageable across multiple ASICs, this commit adds a new
function named dc_commit_streams which is a copy of the dc_commit_state
with some minor changes. Finally, inside the dc_commit_state, we check
if we are using DCN32x or above and enable the new sequence only for
those devices.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 59de751e3845 ("drm/amd/display: add ODM case when looking for first split pipe")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc.c | 46 ++++++++++++++++++++++++
 drivers/gpu/drm/amd/display/dc/dc.h      | 13 +++----
 2 files changed, 50 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 226c17e78d3e1..a457b87d23c41 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -1913,11 +1913,57 @@ static enum dc_status dc_commit_state_no_check(struct dc *dc, struct dc_state *c
 	return result;
 }
 
+enum dc_status dc_commit_streams(struct dc *dc, struct dc_state *context)
+{
+	enum dc_status res = DC_OK;
+	int i;
+
+	if (!streams_changed(dc, context->streams, context->stream_count))
+		return res;
+
+	DC_LOG_DC("%s: %d streams\n",
+				__func__, context->stream_count);
+
+	for (i = 0; i < context->stream_count; i++) {
+		struct dc_stream_state *stream = context->streams[i];
+
+		dc_stream_log(dc, stream);
+	}
+
+	/*
+	 * Previous validation was perfomred with fast_validation = true and
+	 * the full DML state required for hardware programming was skipped.
+	 *
+	 * Re-validate here to calculate these parameters / watermarks.
+	 */
+	res = dc_validate_global_state(dc, context, false);
+	if (res != DC_OK) {
+		DC_LOG_ERROR("DC commit global validation failure: %s (%d)",
+			     dc_status_to_str(res), res);
+		return res;
+	}
+
+	res = dc_commit_state_no_check(dc, context);
+
+	return (res == DC_OK);
+}
+
+/* TODO: When the transition to the new commit sequence is done, remove this
+ * function in favor of dc_commit_streams. */
 bool dc_commit_state(struct dc *dc, struct dc_state *context)
 {
 	enum dc_status result = DC_ERROR_UNEXPECTED;
 	int i;
 
+	/* TODO: Since change commit sequence can have a huge impact,
+	 * we decided to only enable it for DCN3x. However, as soon as
+	 * we get more confident about this change we'll need to enable
+	 * the new sequence for all ASICs. */
+	if (dc->ctx->dce_version >= DCN_VERSION_3_2) {
+		result = dc_commit_streams(dc, context);
+		return result == DC_OK;
+	}
+
 	if (!streams_changed(dc, context->streams, context->stream_count))
 		return DC_OK;
 
diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h
index 3f277009075fd..3db3554c289b4 100644
--- a/drivers/gpu/drm/amd/display/dc/dc.h
+++ b/drivers/gpu/drm/amd/display/dc/dc.h
@@ -1326,15 +1326,10 @@ void dc_resource_state_destruct(struct dc_state *context);
 
 bool dc_resource_is_dsc_encoding_supported(const struct dc *dc);
 
-/*
- * TODO update to make it about validation sets
- * Set up streams and links associated to drive sinks
- * The streams parameter is an absolute set of all active streams.
- *
- * After this call:
- *   Phy, Encoder, Timing Generator are programmed and enabled.
- *   New streams are enabled with blank stream; no memory read.
- */
+enum dc_status dc_commit_streams(struct dc *dc, struct dc_state *context);
+
+/* TODO: When the transition to the new commit sequence is done, remove this
+ * function in favor of dc_commit_streams. */
 bool dc_commit_state(struct dc *dc, struct dc_state *context);
 
 struct dc_state *dc_create_state(struct dc *dc);
-- 
2.39.2

[PATCH 6.1 037/228] drm/amd/display: Copy DC context in the commit streams

[Greg Kroah-Hartman]

From: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>

[ Upstream commit 0e986cea0347902b2c72b09c8fe9c0f30d7decb4 ]

DC adds an instance of DML (which contains VBA) to each context, and
multiple threads might write back to the global VBA resulting in data
overwriting. To keep the consistency with other parts of the DC code,
this commit changes dc_commit_streams to copy the current DC state, and
as a result, it also changes the function signature to expect streams
instead of a context.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 59de751e3845 ("drm/amd/display: add ODM case when looking for first split pipe")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc.c | 41 +++++++++++++++++++-----
 drivers/gpu/drm/amd/display/dc/dc.h      |  4 ++-
 2 files changed, 36 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index a457b87d23c41..31791c557c8f8 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -1913,23 +1913,44 @@ static enum dc_status dc_commit_state_no_check(struct dc *dc, struct dc_state *c
 	return result;
 }
 
-enum dc_status dc_commit_streams(struct dc *dc, struct dc_state *context)
+/**
+ * dc_commit_streams - Commit current stream state
+ *
+ * @dc: DC object with the commit state to be configured in the hardware
+ * @streams: Array with a list of stream state
+ * @stream_count: Total of streams
+ *
+ * Function responsible for commit streams change to the hardware.
+ *
+ * Return:
+ * Return DC_OK if everything work as expected, otherwise, return a dc_status
+ * code.
+ */
+enum dc_status dc_commit_streams(struct dc *dc,
+				 struct dc_stream_state *streams[],
+				 uint8_t stream_count)
 {
-	enum dc_status res = DC_OK;
 	int i;
+	struct dc_state *context;
+	enum dc_status res = DC_OK;
 
-	if (!streams_changed(dc, context->streams, context->stream_count))
+	if (!streams_changed(dc, streams, stream_count))
 		return res;
 
-	DC_LOG_DC("%s: %d streams\n",
-				__func__, context->stream_count);
+	DC_LOG_DC("%s: %d streams\n", __func__, stream_count);
 
-	for (i = 0; i < context->stream_count; i++) {
-		struct dc_stream_state *stream = context->streams[i];
+	for (i = 0; i < stream_count; i++) {
+		struct dc_stream_state *stream = streams[i];
 
 		dc_stream_log(dc, stream);
 	}
 
+	context = dc_create_state(dc);
+	if (!context)
+		goto context_alloc_fail;
+
+	dc_resource_state_copy_construct_current(dc, context);
+
 	/*
 	 * Previous validation was perfomred with fast_validation = true and
 	 * the full DML state required for hardware programming was skipped.
@@ -1945,6 +1966,10 @@ enum dc_status dc_commit_streams(struct dc *dc, struct dc_state *context)
 
 	res = dc_commit_state_no_check(dc, context);
 
+context_alloc_fail:
+
+	DC_LOG_DC("%s Finished.\n", __func__);
+
 	return (res == DC_OK);
 }
 
@@ -1960,7 +1985,7 @@ bool dc_commit_state(struct dc *dc, struct dc_state *context)
 	 * we get more confident about this change we'll need to enable
 	 * the new sequence for all ASICs. */
 	if (dc->ctx->dce_version >= DCN_VERSION_3_2) {
-		result = dc_commit_streams(dc, context);
+		result = dc_commit_streams(dc, context->streams, context->stream_count);
 		return result == DC_OK;
 	}
 
diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h
index 3db3554c289b4..78b7dbd23a3b7 100644
--- a/drivers/gpu/drm/amd/display/dc/dc.h
+++ b/drivers/gpu/drm/amd/display/dc/dc.h
@@ -1326,7 +1326,9 @@ void dc_resource_state_destruct(struct dc_state *context);
 
 bool dc_resource_is_dsc_encoding_supported(const struct dc *dc);
 
-enum dc_status dc_commit_streams(struct dc *dc, struct dc_state *context);
+enum dc_status dc_commit_streams(struct dc *dc,
+				 struct dc_stream_state *streams[],
+				 uint8_t stream_count);
 
 /* TODO: When the transition to the new commit sequence is done, remove this
  * function in favor of dc_commit_streams. */
-- 
2.39.2

[PATCH 6.1 038/228] drm/amd/display: Include surface of unaffected streams

[Greg Kroah-Hartman]

From: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>

[ Upstream commit f6ae69f49fcf697b6ffa93d58eb3746897f61cf8 ]

The commit stream function does not include surfaces of unaffected
streams, which may lead to some blank screens during mode change in some
edge cases. This commit adds surfaces of unaffected streams followed by
kernel-doc for documenting some of the fields that participate in this
change.

v2: squash in kerneldoc warning fix (Alex)

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 59de751e3845 ("drm/amd/display: add ODM case when looking for first split pipe")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc.c   | 12 +++++++++++-
 drivers/gpu/drm/amd/display/dc/dc.h        | 15 +++++++++++++--
 drivers/gpu/drm/amd/display/dc/dc_stream.h |  4 ++++
 3 files changed, 28 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 31791c557c8f8..cbbad496cfc63 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -1930,9 +1930,10 @@ enum dc_status dc_commit_streams(struct dc *dc,
 				 struct dc_stream_state *streams[],
 				 uint8_t stream_count)
 {
-	int i;
+	int i, j;
 	struct dc_state *context;
 	enum dc_status res = DC_OK;
+	struct dc_validation_set set[MAX_STREAMS] = {0};
 
 	if (!streams_changed(dc, streams, stream_count))
 		return res;
@@ -1941,8 +1942,17 @@ enum dc_status dc_commit_streams(struct dc *dc,
 
 	for (i = 0; i < stream_count; i++) {
 		struct dc_stream_state *stream = streams[i];
+		struct dc_stream_status *status = dc_stream_get_status(stream);
 
 		dc_stream_log(dc, stream);
+
+		set[i].stream = stream;
+
+		if (status) {
+			set[i].plane_count = status->plane_count;
+			for (j = 0; j < status->plane_count; j++)
+				set[i].plane_states[j] = status->plane_states[j];
+		}
 	}
 
 	context = dc_create_state(dc);
diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h
index 78b7dbd23a3b7..e2c5a68bbc807 100644
--- a/drivers/gpu/drm/amd/display/dc/dc.h
+++ b/drivers/gpu/drm/amd/display/dc/dc.h
@@ -1274,12 +1274,23 @@ void dc_post_update_surfaces_to_stream(
 
 #include "dc_stream.h"
 
-/*
- * Structure to store surface/stream associations for validation
+/**
+ * struct dc_validation_set - Struct to store surface/stream associations for validation
  */
 struct dc_validation_set {
+	/**
+	 * @stream: Stream state properties
+	 */
 	struct dc_stream_state *stream;
+
+	/**
+	 * @plane_state: Surface state
+	 */
 	struct dc_plane_state *plane_states[MAX_SURFACES];
+
+	/**
+	 * @plane_count: Total of active planes
+	 */
 	uint8_t plane_count;
 };
 
diff --git a/drivers/gpu/drm/amd/display/dc/dc_stream.h b/drivers/gpu/drm/amd/display/dc/dc_stream.h
index 9e6025c98db91..73dccd485895d 100644
--- a/drivers/gpu/drm/amd/display/dc/dc_stream.h
+++ b/drivers/gpu/drm/amd/display/dc/dc_stream.h
@@ -41,6 +41,10 @@ struct timing_sync_info {
 struct dc_stream_status {
 	int primary_otg_inst;
 	int stream_enc_inst;
+
+	/**
+	 * @plane_count: Total of planes attached to a single stream
+	 */
 	int plane_count;
 	int audio_inst;
 	struct timing_sync_info timing_sync_info;
-- 
2.39.2

[PATCH 6.1 039/228] drm/amd/display: Use min transition for all SubVP plane add/remove

[Greg Kroah-Hartman]

From: Alvin Lee <Alvin.Lee2@amd.com>

[ Upstream commit e4c1b01bc35b04e15782608165aa85b9e1724f7b ]

[Description]
- Whenever disabling a phantom pipe, we must run through the
  minimal transition sequence
- In the case where SetVisibility = false for the main pipe,
  we also need to run through the min transtion when disabling
  the phantom pipes

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 59de751e3845 ("drm/amd/display: add ODM case when looking for first split pipe")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc.c | 31 +++++++++++++++++-------
 1 file changed, 22 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index cbbad496cfc63..c429748c86cdb 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -3731,17 +3731,17 @@ static bool could_mpcc_tree_change_for_active_pipes(struct dc *dc,
 		}
 	}
 
-	/* For SubVP when adding MPO video we need to add a minimal transition.
+	/* For SubVP when adding or removing planes we need to add a minimal transition
+	 * (even when disabling all planes). Whenever disabling a phantom pipe, we
+	 * must use the minimal transition path to disable the pipe correctly.
 	 */
 	if (cur_stream_status && stream->mall_stream_config.type == SUBVP_MAIN) {
 		/* determine if minimal transition is required due to SubVP*/
-		if (surface_count > 0) {
-			if (cur_stream_status->plane_count > surface_count) {
-				force_minimal_pipe_splitting = true;
-			} else if (cur_stream_status->plane_count < surface_count) {
-				force_minimal_pipe_splitting = true;
-				*is_plane_addition = true;
-			}
+		if (cur_stream_status->plane_count > surface_count) {
+			force_minimal_pipe_splitting = true;
+		} else if (cur_stream_status->plane_count < surface_count) {
+			force_minimal_pipe_splitting = true;
+			*is_plane_addition = true;
 		}
 	}
 
@@ -3758,6 +3758,7 @@ static bool commit_minimal_transition_state(struct dc *dc,
 	enum dc_status ret = DC_ERROR_UNEXPECTED;
 	unsigned int i, j;
 	unsigned int pipe_in_use = 0;
+	bool subvp_in_use = false;
 
 	if (!transition_context)
 		return false;
@@ -3770,6 +3771,18 @@ static bool commit_minimal_transition_state(struct dc *dc,
 			pipe_in_use++;
 	}
 
+	/* If SubVP is enabled and we are adding or removing planes from any main subvp
+	 * pipe, we must use the minimal transition.
+	 */
+	for (i = 0; i < dc->res_pool->pipe_count; i++) {
+		struct pipe_ctx *pipe = &dc->current_state->res_ctx.pipe_ctx[i];
+
+		if (pipe->stream && pipe->stream->mall_stream_config.type == SUBVP_PHANTOM) {
+			subvp_in_use = true;
+			break;
+		}
+	}
+
 	/* When the OS add a new surface if we have been used all of pipes with odm combine
 	 * and mpc split feature, it need use commit_minimal_transition_state to transition safely.
 	 * After OS exit MPO, it will back to use odm and mpc split with all of pipes, we need
@@ -3778,7 +3791,7 @@ static bool commit_minimal_transition_state(struct dc *dc,
 	 * Reduce the scenarios to use dc_commit_state_no_check in the stage of flip. Especially
 	 * enter/exit MPO when DCN still have enough resources.
 	 */
-	if (pipe_in_use != dc->res_pool->pipe_count) {
+	if (pipe_in_use != dc->res_pool->pipe_count && !subvp_in_use) {
 		dc_release_state(transition_context);
 		return true;
 	}
-- 
2.39.2

[PATCH 6.1 040/228] drm/amd/display: add ODM case when looking for first split pipe

[Greg Kroah-Hartman]

From: Samson Tam <samson.tam@amd.com>

[ Upstream commit 59de751e3845d699e02dc4da47322b92d83a41e2 ]

[Why]
When going from ODM 2:1 single display case to max displays, second
odm pipe needs to be repurposed for one of the new single displays.
However, acquire_first_split_pipe() only handles MPC case and not
ODM case

[How]
Add ODM conditions in acquire_first_split_pipe()
Add commit_minimal_transition_state() in commit_streams() to handle
odm 2:1 exit first, and then process new streams
Handle ODM condition in commit_minimal_transition_state()

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc.c      | 36 ++++++++++++++++++-
 .../gpu/drm/amd/display/dc/core/dc_resource.c | 20 +++++++++++
 2 files changed, 55 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index c429748c86cdb..629bc53f61877 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -1913,6 +1913,9 @@ static enum dc_status dc_commit_state_no_check(struct dc *dc, struct dc_state *c
 	return result;
 }
 
+static bool commit_minimal_transition_state(struct dc *dc,
+		struct dc_state *transition_base_context);
+
 /**
  * dc_commit_streams - Commit current stream state
  *
@@ -1934,6 +1937,8 @@ enum dc_status dc_commit_streams(struct dc *dc,
 	struct dc_state *context;
 	enum dc_status res = DC_OK;
 	struct dc_validation_set set[MAX_STREAMS] = {0};
+	struct pipe_ctx *pipe;
+	bool handle_exit_odm2to1 = false;
 
 	if (!streams_changed(dc, streams, stream_count))
 		return res;
@@ -1955,6 +1960,22 @@ enum dc_status dc_commit_streams(struct dc *dc,
 		}
 	}
 
+	/* Check for case where we are going from odm 2:1 to max
+	 *  pipe scenario.  For these cases, we will call
+	 *  commit_minimal_transition_state() to exit out of odm 2:1
+	 *  first before processing new streams
+	 */
+	if (stream_count == dc->res_pool->pipe_count) {
+		for (i = 0; i < dc->res_pool->pipe_count; i++) {
+			pipe = &dc->current_state->res_ctx.pipe_ctx[i];
+			if (pipe->next_odm_pipe)
+				handle_exit_odm2to1 = true;
+		}
+	}
+
+	if (handle_exit_odm2to1)
+		res = commit_minimal_transition_state(dc, dc->current_state);
+
 	context = dc_create_state(dc);
 	if (!context)
 		goto context_alloc_fail;
@@ -3759,6 +3780,7 @@ static bool commit_minimal_transition_state(struct dc *dc,
 	unsigned int i, j;
 	unsigned int pipe_in_use = 0;
 	bool subvp_in_use = false;
+	bool odm_in_use = false;
 
 	if (!transition_context)
 		return false;
@@ -3783,6 +3805,18 @@ static bool commit_minimal_transition_state(struct dc *dc,
 		}
 	}
 
+	/* If ODM is enabled and we are adding or removing planes from any ODM
+	 * pipe, we must use the minimal transition.
+	 */
+	for (i = 0; i < dc->res_pool->pipe_count; i++) {
+		struct pipe_ctx *pipe = &dc->current_state->res_ctx.pipe_ctx[i];
+
+		if (pipe->stream && pipe->next_odm_pipe) {
+			odm_in_use = true;
+			break;
+		}
+	}
+
 	/* When the OS add a new surface if we have been used all of pipes with odm combine
 	 * and mpc split feature, it need use commit_minimal_transition_state to transition safely.
 	 * After OS exit MPO, it will back to use odm and mpc split with all of pipes, we need
@@ -3791,7 +3825,7 @@ static bool commit_minimal_transition_state(struct dc *dc,
 	 * Reduce the scenarios to use dc_commit_state_no_check in the stage of flip. Especially
 	 * enter/exit MPO when DCN still have enough resources.
 	 */
-	if (pipe_in_use != dc->res_pool->pipe_count && !subvp_in_use) {
+	if (pipe_in_use != dc->res_pool->pipe_count && !subvp_in_use && !odm_in_use) {
 		dc_release_state(transition_context);
 		return true;
 	}
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
index f0d05829288bd..a26e52abc9898 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
@@ -1444,6 +1444,26 @@ static int acquire_first_split_pipe(
 			split_pipe->plane_res.mpcc_inst = pool->dpps[i]->inst;
 			split_pipe->pipe_idx = i;
 
+			split_pipe->stream = stream;
+			return i;
+		} else if (split_pipe->prev_odm_pipe &&
+				split_pipe->prev_odm_pipe->plane_state == split_pipe->plane_state) {
+			split_pipe->prev_odm_pipe->next_odm_pipe = split_pipe->next_odm_pipe;
+			if (split_pipe->next_odm_pipe)
+				split_pipe->next_odm_pipe->prev_odm_pipe = split_pipe->prev_odm_pipe;
+
+			if (split_pipe->prev_odm_pipe->plane_state)
+				resource_build_scaling_params(split_pipe->prev_odm_pipe);
+
+			memset(split_pipe, 0, sizeof(*split_pipe));
+			split_pipe->stream_res.tg = pool->timing_generators[i];
+			split_pipe->plane_res.hubp = pool->hubps[i];
+			split_pipe->plane_res.ipp = pool->ipps[i];
+			split_pipe->plane_res.dpp = pool->dpps[i];
+			split_pipe->stream_res.opp = pool->opps[i];
+			split_pipe->plane_res.mpcc_inst = pool->dpps[i]->inst;
+			split_pipe->pipe_idx = i;
+
 			split_pipe->stream = stream;
 			return i;
 		}
-- 
2.39.2

[PATCH 6.1 041/228] drm/amd/display: use low clocks for no plane configs

[Greg Kroah-Hartman]

From: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>

[ Upstream commit 2641c7b7808191cba25ba28b82bb73ca294924cc ]

Stream only configurations do not require DCFCLK, SOCCLK, DPPCLK
or FCLK. They also always allow pstate change.

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 49f26218c344 ("drm/amd/display: fix dcn315 single stream crb allocation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/amd/display/dc/dml/dcn31/dcn31_fpu.c   | 18 ++++++++++++++----
 .../drm/amd/display/dc/dml/dcn32/dcn32_fpu.c   | 14 +++++++++++++-
 2 files changed, 27 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c
index 8e416433184cf..aa1c2917a4a1d 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c
@@ -483,7 +483,7 @@ void dcn31_calculate_wm_and_dlg_fp(
 		int pipe_cnt,
 		int vlevel)
 {
-	int i, pipe_idx, active_dpp_count = 0;
+	int i, pipe_idx, active_hubp_count = 0;
 	double dcfclk = context->bw_ctx.dml.vba.DCFCLKState[vlevel][context->bw_ctx.dml.vba.maxMpcComb];
 
 	dc_assert_fp_enabled();
@@ -529,7 +529,7 @@ void dcn31_calculate_wm_and_dlg_fp(
 			continue;
 
 		if (context->res_ctx.pipe_ctx[i].plane_state)
-			active_dpp_count++;
+			active_hubp_count++;
 
 		pipes[pipe_idx].clks_cfg.dispclk_mhz = get_dispclk_calculated(&context->bw_ctx.dml, pipes, pipe_cnt);
 		pipes[pipe_idx].clks_cfg.dppclk_mhz = get_dppclk_calculated(&context->bw_ctx.dml, pipes, pipe_cnt, pipe_idx);
@@ -547,9 +547,19 @@ void dcn31_calculate_wm_and_dlg_fp(
 	}
 
 	dcn20_calculate_dlg_params(dc, context, pipes, pipe_cnt, vlevel);
-	/* For 31x apu pstate change is only supported if possible in vactive or if there are no active dpps */
+	/* For 31x apu pstate change is only supported if possible in vactive*/
 	context->bw_ctx.bw.dcn.clk.p_state_change_support =
-			context->bw_ctx.dml.vba.DRAMClockChangeSupport[vlevel][context->bw_ctx.dml.vba.maxMpcComb] == dm_dram_clock_change_vactive || !active_dpp_count;
+			context->bw_ctx.dml.vba.DRAMClockChangeSupport[vlevel][context->bw_ctx.dml.vba.maxMpcComb] == dm_dram_clock_change_vactive;
+	/* If DCN isn't making memory requests we can allow pstate change and lower clocks */
+	if (!active_hubp_count) {
+		context->bw_ctx.bw.dcn.clk.socclk_khz = 0;
+		context->bw_ctx.bw.dcn.clk.dppclk_khz = 0;
+		context->bw_ctx.bw.dcn.clk.dcfclk_khz = 0;
+		context->bw_ctx.bw.dcn.clk.dcfclk_deep_sleep_khz = 0;
+		context->bw_ctx.bw.dcn.clk.dramclk_khz = 0;
+		context->bw_ctx.bw.dcn.clk.fclk_khz = 0;
+		context->bw_ctx.bw.dcn.clk.p_state_change_support = true;
+	}
 }
 
 void dcn31_update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_params)
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
index f28caece5f901..f88c80594bd7e 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
@@ -1237,7 +1237,7 @@ static void dcn32_calculate_dlg_params(struct dc *dc, struct dc_state *context,
 				       display_e2e_pipe_params_st *pipes,
 				       int pipe_cnt, int vlevel)
 {
-	int i, pipe_idx;
+	int i, pipe_idx, active_hubp_count = 0;
 	bool usr_retraining_support = false;
 	bool unbounded_req_enabled = false;
 
@@ -1282,6 +1282,8 @@ static void dcn32_calculate_dlg_params(struct dc *dc, struct dc_state *context,
 	for (i = 0, pipe_idx = 0; i < dc->res_pool->pipe_count; i++) {
 		if (!context->res_ctx.pipe_ctx[i].stream)
 			continue;
+		if (context->res_ctx.pipe_ctx[i].plane_state)
+			active_hubp_count++;
 		pipes[pipe_idx].pipe.dest.vstartup_start = get_vstartup(&context->bw_ctx.dml, pipes, pipe_cnt,
 				pipe_idx);
 		pipes[pipe_idx].pipe.dest.vupdate_offset = get_vupdate_offset(&context->bw_ctx.dml, pipes, pipe_cnt,
@@ -1307,6 +1309,16 @@ static void dcn32_calculate_dlg_params(struct dc *dc, struct dc_state *context,
 		context->res_ctx.pipe_ctx[i].pipe_dlg_param = pipes[pipe_idx].pipe.dest;
 		pipe_idx++;
 	}
+	/* If DCN isn't making memory requests we can allow pstate change and lower clocks */
+	if (!active_hubp_count) {
+		context->bw_ctx.bw.dcn.clk.socclk_khz = 0;
+		context->bw_ctx.bw.dcn.clk.dppclk_khz = 0;
+		context->bw_ctx.bw.dcn.clk.dcfclk_khz = 0;
+		context->bw_ctx.bw.dcn.clk.dcfclk_deep_sleep_khz = 0;
+		context->bw_ctx.bw.dcn.clk.dramclk_khz = 0;
+		context->bw_ctx.bw.dcn.clk.fclk_khz = 0;
+		context->bw_ctx.bw.dcn.clk.p_state_change_support = true;
+	}
 	/*save a original dppclock copy*/
 	context->bw_ctx.bw.dcn.clk.bw_dppclk_khz = context->bw_ctx.bw.dcn.clk.dppclk_khz;
 	context->bw_ctx.bw.dcn.clk.bw_dispclk_khz = context->bw_ctx.bw.dcn.clk.dispclk_khz;
-- 
2.39.2

[PATCH 6.1 042/228] drm/amd/display: fix unbounded requesting for high pixel rate modes on dcn315

[Greg Kroah-Hartman]

From: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>

[ Upstream commit 655435df0936ce2fda0d5ced7e50101179a3acfd ]

Unbounded requesting is getting configured for odm mode calculations which
is incorrect. This change checks whether mode requires odm ahead of time.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 49f26218c344 ("drm/amd/display: fix dcn315 single stream crb allocation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c | 4 +++-
 drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c    | 5 +++++
 drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.h    | 1 +
 3 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c b/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c
index 31cbc5762eab3..19f2025cb7907 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c
@@ -1707,7 +1707,9 @@ static int dcn315_populate_dml_pipes_from_context(
 			dc->config.enable_4to1MPC = true;
 			context->bw_ctx.dml.ip.det_buffer_size_kbytes =
 					(max_usable_det / DCN3_15_CRB_SEGMENT_SIZE_KB / 4) * DCN3_15_CRB_SEGMENT_SIZE_KB;
-		} else if (!is_dual_plane(pipe->plane_state->format) && pipe->plane_state->src_rect.width <= 5120) {
+		} else if (!is_dual_plane(pipe->plane_state->format)
+				&& pipe->plane_state->src_rect.width <= 5120
+				&& pipe->stream->timing.pix_clk_100hz < dcn_get_max_non_odm_pix_rate_100hz(&dc->dml.soc)) {
 			/* Limit to 5k max to avoid forced pipe split when there is not enough detile for swath */
 			context->bw_ctx.dml.ip.det_buffer_size_kbytes = 192;
 			pipes[0].pipe.src.unbounded_req_mode = true;
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c
index aa1c2917a4a1d..e48923f314b36 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c
@@ -807,3 +807,8 @@ void dcn316_update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_param
 	else
 		dml_init_instance(&dc->dml, &dcn3_16_soc, &dcn3_16_ip, DML_PROJECT_DCN31_FPGA);
 }
+
+int dcn_get_max_non_odm_pix_rate_100hz(struct _vcs_dpi_soc_bounding_box_st *soc)
+{
+	return soc->clock_limits[0].dispclk_mhz * 10000.0 / (1.0 + soc->dcn_downspread_percent / 100.0);
+}
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.h b/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.h
index fd58b2561ec9e..ab8c48b8b7e05 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.h
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.h
@@ -46,5 +46,6 @@ void dcn31_calculate_wm_and_dlg_fp(
 void dcn31_update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_params);
 void dcn315_update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_params);
 void dcn316_update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_params);
+int dcn_get_max_non_odm_pix_rate_100hz(struct _vcs_dpi_soc_bounding_box_st *soc);
 
 #endif /* __DCN31_FPU_H__*/
-- 
2.39.2

[PATCH 6.1 043/228] drm/amd/display: add pixel rate based CRB allocation support

[Greg Kroah-Hartman]

From: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>

[ Upstream commit 9ba90d760e9354c124fa9bbea08017d96699a82c ]

This feature is meant to unblock PSTATE for certain high end display
configs on dcn315. This is achieved by allocating CRB to detile buffer
based on display requirements to meet pstate latency hiding needs.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 49f26218c344 ("drm/amd/display: fix dcn315 single stream crb allocation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/amd/display/dc/dcn31/dcn31_hubbub.c   |  1 +
 .../amd/display/dc/dcn315/dcn315_resource.c   | 97 ++++++++++++++++++-
 .../drm/amd/display/dc/dml/dcn31/dcn31_fpu.c  | 25 ++++-
 .../drm/amd/display/dc/dml/dcn31/dcn31_fpu.h  |  3 +
 .../dc/dml/dcn31/display_mode_vba_31.c        | 39 +++++---
 .../drm/amd/display/dc/dml/display_mode_vba.c |  6 ++
 6 files changed, 154 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hubbub.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hubbub.c
index 6360dc9502e70..0f231e42e4206 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hubbub.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hubbub.c
@@ -103,6 +103,7 @@ static void dcn31_program_det_size(struct hubbub *hubbub, int hubp_inst, unsigne
 	default:
 		break;
 	}
+	DC_LOG_DEBUG("Set DET%d to %d segments\n", hubp_inst, det_size_segments);
 	/* Should never be hit, if it is we have an erroneous hw config*/
 	ASSERT(hubbub2->det0_size + hubbub2->det1_size + hubbub2->det2_size
 			+ hubbub2->det3_size + hubbub2->compbuf_size_segments <= hubbub2->crb_size_segs);
diff --git a/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c b/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c
index 19f2025cb7907..88c4a378daa12 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c
@@ -136,6 +136,9 @@
 
 #define DCN3_15_MAX_DET_SIZE 384
 #define DCN3_15_CRB_SEGMENT_SIZE_KB 64
+#define DCN3_15_MAX_DET_SEGS (DCN3_15_MAX_DET_SIZE / DCN3_15_CRB_SEGMENT_SIZE_KB)
+/* Minimum 2 extra segments need to be in compbuf and claimable to guarantee seamless mpo transitions */
+#define MIN_RESERVED_DET_SEGS 2
 
 enum dcn31_clk_src_array_id {
 	DCN31_CLK_SRC_PLL0,
@@ -1636,21 +1639,57 @@ static bool is_dual_plane(enum surface_pixel_format format)
 	return format >= SURFACE_PIXEL_FORMAT_VIDEO_BEGIN || format == SURFACE_PIXEL_FORMAT_GRPH_RGBE_ALPHA;
 }
 
+static int source_format_to_bpp (enum source_format_class SourcePixelFormat)
+{
+	if (SourcePixelFormat == dm_444_64)
+		return 8;
+	else if (SourcePixelFormat == dm_444_16 || SourcePixelFormat == dm_444_16)
+		return 2;
+	else if (SourcePixelFormat == dm_444_8)
+		return 1;
+	else if (SourcePixelFormat == dm_rgbe_alpha)
+		return 5;
+	else if (SourcePixelFormat == dm_420_8)
+		return 3;
+	else if (SourcePixelFormat == dm_420_12)
+		return 6;
+	else
+		return 4;
+}
+
+static bool allow_pixel_rate_crb(struct dc *dc, struct dc_state *context)
+{
+	int i;
+	struct resource_context *res_ctx = &context->res_ctx;
+
+	for (i = 0; i < dc->res_pool->pipe_count; i++) {
+		if (!res_ctx->pipe_ctx[i].stream)
+			continue;
+
+		/*Don't apply if MPO to avoid transition issues*/
+		if (res_ctx->pipe_ctx[i].top_pipe && res_ctx->pipe_ctx[i].top_pipe->plane_state != res_ctx->pipe_ctx[i].plane_state)
+			return false;
+	}
+	return true;
+}
+
 static int dcn315_populate_dml_pipes_from_context(
 	struct dc *dc, struct dc_state *context,
 	display_e2e_pipe_params_st *pipes,
 	bool fast_validate)
 {
-	int i, pipe_cnt;
+	int i, pipe_cnt, crb_idx, crb_pipes;
 	struct resource_context *res_ctx = &context->res_ctx;
 	struct pipe_ctx *pipe;
 	const int max_usable_det = context->bw_ctx.dml.ip.config_return_buffer_size_in_kbytes - DCN3_15_MIN_COMPBUF_SIZE_KB;
+	int remaining_det_segs = max_usable_det / DCN3_15_CRB_SEGMENT_SIZE_KB;
+	bool pixel_rate_crb = allow_pixel_rate_crb(dc, context);
 
 	DC_FP_START();
 	dcn20_populate_dml_pipes_from_context(dc, context, pipes, fast_validate);
 	DC_FP_END();
 
-	for (i = 0, pipe_cnt = 0; i < dc->res_pool->pipe_count; i++) {
+	for (i = 0, pipe_cnt = 0, crb_pipes = 0; i < dc->res_pool->pipe_count; i++) {
 		struct dc_crtc_timing *timing;
 
 		if (!res_ctx->pipe_ctx[i].stream)
@@ -1672,6 +1711,23 @@ static int dcn315_populate_dml_pipes_from_context(
 		pipes[pipe_cnt].dout.dsc_input_bpc = 0;
 		DC_FP_START();
 		dcn31_zero_pipe_dcc_fraction(pipes, pipe_cnt);
+		if (pixel_rate_crb && !pipe->top_pipe && !pipe->prev_odm_pipe) {
+			int bpp = source_format_to_bpp(pipes[pipe_cnt].pipe.src.source_format);
+			/* Ceil to crb segment size */
+			int approx_det_segs_required_for_pstate = dcn_get_approx_det_segs_required_for_pstate(
+					&context->bw_ctx.dml.soc, timing->pix_clk_100hz, bpp, DCN3_15_CRB_SEGMENT_SIZE_KB);
+			if (approx_det_segs_required_for_pstate <= 2 * DCN3_15_MAX_DET_SEGS) {
+				bool split_required = approx_det_segs_required_for_pstate > DCN3_15_MAX_DET_SEGS;
+				split_required = split_required || timing->pix_clk_100hz >= dcn_get_max_non_odm_pix_rate_100hz(&dc->dml.soc);
+				split_required = split_required || (pipe->plane_state && pipe->plane_state->src_rect.width > 5120);
+				if (split_required)
+					approx_det_segs_required_for_pstate += approx_det_segs_required_for_pstate % 2;
+				pipes[pipe_cnt].pipe.src.det_size_override = approx_det_segs_required_for_pstate;
+				remaining_det_segs -= approx_det_segs_required_for_pstate;
+			} else
+				remaining_det_segs = -1;
+			crb_pipes++;
+		}
 		DC_FP_END();
 
 		if (pipes[pipe_cnt].dout.dsc_enable) {
@@ -1690,16 +1746,49 @@ static int dcn315_populate_dml_pipes_from_context(
 				break;
 			}
 		}
-
 		pipe_cnt++;
 	}
 
+	/* Spread remaining unreserved crb evenly among all pipes, use default policy if not enough det or single pipe */
+	if (pixel_rate_crb) {
+		for (i = 0, pipe_cnt = 0, crb_idx = 0; i < dc->res_pool->pipe_count; i++) {
+			pipe = &res_ctx->pipe_ctx[i];
+			if (!pipe->stream)
+				continue;
+
+			if (!pipe->top_pipe && !pipe->prev_odm_pipe) {
+				bool split_required = pipe->stream->timing.pix_clk_100hz >= dcn_get_max_non_odm_pix_rate_100hz(&dc->dml.soc)
+						|| (pipe->plane_state && pipe->plane_state->src_rect.width > 5120);
+
+				if (remaining_det_segs < 0 || crb_pipes == 1)
+					pipes[pipe_cnt].pipe.src.det_size_override = 0;
+				if (remaining_det_segs > MIN_RESERVED_DET_SEGS)
+					pipes[pipe_cnt].pipe.src.det_size_override += (remaining_det_segs - MIN_RESERVED_DET_SEGS) / crb_pipes +
+							(crb_idx < (remaining_det_segs - MIN_RESERVED_DET_SEGS) % crb_pipes ? 1 : 0);
+				if (pipes[pipe_cnt].pipe.src.det_size_override > 2 * DCN3_15_MAX_DET_SEGS) {
+					/* Clamp to 2 pipe split max det segments */
+					remaining_det_segs += pipes[pipe_cnt].pipe.src.det_size_override - 2 * (DCN3_15_MAX_DET_SEGS);
+					pipes[pipe_cnt].pipe.src.det_size_override = 2 * DCN3_15_MAX_DET_SEGS;
+				}
+				if (pipes[pipe_cnt].pipe.src.det_size_override > DCN3_15_MAX_DET_SEGS || split_required) {
+					/* If we are splitting we must have an even number of segments */
+					remaining_det_segs += pipes[pipe_cnt].pipe.src.det_size_override % 2;
+					pipes[pipe_cnt].pipe.src.det_size_override -= pipes[pipe_cnt].pipe.src.det_size_override % 2;
+				}
+				/* Convert segments into size for DML use */
+				pipes[pipe_cnt].pipe.src.det_size_override *= DCN3_15_CRB_SEGMENT_SIZE_KB;
+				crb_idx++;
+			}
+			pipe_cnt++;
+		}
+	}
+
 	if (pipe_cnt)
 		context->bw_ctx.dml.ip.det_buffer_size_kbytes =
 				(max_usable_det / DCN3_15_CRB_SEGMENT_SIZE_KB / pipe_cnt) * DCN3_15_CRB_SEGMENT_SIZE_KB;
 	if (context->bw_ctx.dml.ip.det_buffer_size_kbytes > DCN3_15_MAX_DET_SIZE)
 		context->bw_ctx.dml.ip.det_buffer_size_kbytes = DCN3_15_MAX_DET_SIZE;
-	ASSERT(context->bw_ctx.dml.ip.det_buffer_size_kbytes >= DCN3_15_DEFAULT_DET_SIZE);
+
 	dc->config.enable_4to1MPC = false;
 	if (pipe_cnt == 1 && pipe->plane_state && !dc->debug.disable_z9_mpc) {
 		if (is_dual_plane(pipe->plane_state->format)
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c
index e48923f314b36..0c0feec88e4f1 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c
@@ -483,7 +483,7 @@ void dcn31_calculate_wm_and_dlg_fp(
 		int pipe_cnt,
 		int vlevel)
 {
-	int i, pipe_idx, active_hubp_count = 0;
+	int i, pipe_idx, total_det = 0, active_hubp_count = 0;
 	double dcfclk = context->bw_ctx.dml.vba.DCFCLKState[vlevel][context->bw_ctx.dml.vba.maxMpcComb];
 
 	dc_assert_fp_enabled();
@@ -560,6 +560,18 @@ void dcn31_calculate_wm_and_dlg_fp(
 		context->bw_ctx.bw.dcn.clk.fclk_khz = 0;
 		context->bw_ctx.bw.dcn.clk.p_state_change_support = true;
 	}
+	for (i = 0, pipe_idx = 0; i < dc->res_pool->pipe_count; i++) {
+		if (!context->res_ctx.pipe_ctx[i].stream)
+			continue;
+
+		context->res_ctx.pipe_ctx[i].det_buffer_size_kb =
+				get_det_buffer_size_kbytes(&context->bw_ctx.dml, pipes, pipe_cnt, pipe_idx);
+		if (context->res_ctx.pipe_ctx[i].det_buffer_size_kb > 384)
+			context->res_ctx.pipe_ctx[i].det_buffer_size_kb /= 2;
+		total_det += context->res_ctx.pipe_ctx[i].det_buffer_size_kb;
+		pipe_idx++;
+	}
+	context->bw_ctx.bw.dcn.compbuf_size_kb = context->bw_ctx.dml.ip.config_return_buffer_size_in_kbytes - total_det;
 }
 
 void dcn31_update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_params)
@@ -812,3 +824,14 @@ int dcn_get_max_non_odm_pix_rate_100hz(struct _vcs_dpi_soc_bounding_box_st *soc)
 {
 	return soc->clock_limits[0].dispclk_mhz * 10000.0 / (1.0 + soc->dcn_downspread_percent / 100.0);
 }
+
+int dcn_get_approx_det_segs_required_for_pstate(
+		struct _vcs_dpi_soc_bounding_box_st *soc,
+		int pix_clk_100hz, int bpp, int seg_size_kb)
+{
+	/* Roughly calculate required crb to hide latency. In practice there is slightly
+	 * more buffer available for latency hiding
+	 */
+	return (int)(soc->dram_clock_change_latency_us * pix_clk_100hz * bpp
+					/ 10240000 + seg_size_kb - 1) /	seg_size_kb;
+}
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.h b/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.h
index ab8c48b8b7e05..99518f64d83dd 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.h
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.h
@@ -47,5 +47,8 @@ void dcn31_update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_params
 void dcn315_update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_params);
 void dcn316_update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_params);
 int dcn_get_max_non_odm_pix_rate_100hz(struct _vcs_dpi_soc_bounding_box_st *soc);
+int dcn_get_approx_det_segs_required_for_pstate(
+		struct _vcs_dpi_soc_bounding_box_st *soc,
+		int pix_clk_100hz, int bpp, int seg_size_kb);
 
 #endif /* __DCN31_FPU_H__*/
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn31/display_mode_vba_31.c b/drivers/gpu/drm/amd/display/dc/dml/dcn31/display_mode_vba_31.c
index cf8f3d690fa66..ebc04b72b284b 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn31/display_mode_vba_31.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn31/display_mode_vba_31.c
@@ -533,7 +533,8 @@ static void CalculateStutterEfficiency(
 static void CalculateSwathAndDETConfiguration(
 		bool ForceSingleDPP,
 		int NumberOfActivePlanes,
-		unsigned int DETBufferSizeInKByte,
+		bool DETSharedByAllDPP,
+		unsigned int DETBufferSizeInKByte[],
 		double MaximumSwathWidthLuma[],
 		double MaximumSwathWidthChroma[],
 		enum scan_direction_class SourceScan[],
@@ -3116,7 +3117,7 @@ static void DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerforman
 				v->SurfaceWidthC[k],
 				v->SurfaceHeightY[k],
 				v->SurfaceHeightC[k],
-				v->DETBufferSizeInKByte[0] * 1024,
+				v->DETBufferSizeInKByte[k] * 1024,
 				v->BlockHeight256BytesY[k],
 				v->BlockHeight256BytesC[k],
 				v->SurfaceTiling[k],
@@ -3311,7 +3312,8 @@ static void DisplayPipeConfiguration(struct display_mode_lib *mode_lib)
 	CalculateSwathAndDETConfiguration(
 			false,
 			v->NumberOfActivePlanes,
-			v->DETBufferSizeInKByte[0],
+			mode_lib->project == DML_PROJECT_DCN315 && v->DETSizeOverride[0],
+			v->DETBufferSizeInKByte,
 			dummy1,
 			dummy2,
 			v->SourceScan,
@@ -3777,14 +3779,16 @@ static noinline void CalculatePrefetchSchedulePerPlane(
 		&v->VReadyOffsetPix[k]);
 }
 
-static void PatchDETBufferSizeInKByte(unsigned int NumberOfActivePlanes, int NoOfDPPThisState[], unsigned int config_return_buffer_size_in_kbytes, unsigned int *DETBufferSizeInKByte)
+static void PatchDETBufferSizeInKByte(unsigned int NumberOfActivePlanes, int NoOfDPPThisState[], unsigned int config_return_buffer_size_in_kbytes, unsigned int DETBufferSizeInKByte[])
 {
 	int i, total_pipes = 0;
 	for (i = 0; i < NumberOfActivePlanes; i++)
 		total_pipes += NoOfDPPThisState[i];
-	*DETBufferSizeInKByte = ((config_return_buffer_size_in_kbytes - DCN3_15_MIN_COMPBUF_SIZE_KB) / 64 / total_pipes) * 64;
-	if (*DETBufferSizeInKByte > DCN3_15_MAX_DET_SIZE)
-		*DETBufferSizeInKByte = DCN3_15_MAX_DET_SIZE;
+	DETBufferSizeInKByte[0] = ((config_return_buffer_size_in_kbytes - DCN3_15_MIN_COMPBUF_SIZE_KB) / 64 / total_pipes) * 64;
+	if (DETBufferSizeInKByte[0] > DCN3_15_MAX_DET_SIZE)
+		DETBufferSizeInKByte[0] = DCN3_15_MAX_DET_SIZE;
+	for (i = 1; i < NumberOfActivePlanes; i++)
+		DETBufferSizeInKByte[i] = DETBufferSizeInKByte[0];
 }
 
 
@@ -4024,7 +4028,8 @@ void dml31_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l
 	CalculateSwathAndDETConfiguration(
 			true,
 			v->NumberOfActivePlanes,
-			v->DETBufferSizeInKByte[0],
+			mode_lib->project == DML_PROJECT_DCN315 && v->DETSizeOverride[0],
+			v->DETBufferSizeInKByte,
 			v->MaximumSwathWidthLuma,
 			v->MaximumSwathWidthChroma,
 			v->SourceScan,
@@ -4164,6 +4169,10 @@ void dml31_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l
 						|| (v->PlaneRequiredDISPCLK > v->MaxDispclkRoundedDownToDFSGranularity)) {
 					v->DISPCLK_DPPCLK_Support[i][j] = false;
 				}
+				if (mode_lib->project == DML_PROJECT_DCN315 && v->DETSizeOverride[k] > DCN3_15_MAX_DET_SIZE && v->NoOfDPP[i][j][k] < 2) {
+					v->MPCCombine[i][j][k] = true;
+					v->NoOfDPP[i][j][k] = 2;
+				}
 			}
 			v->TotalNumberOfActiveDPP[i][j] = 0;
 			v->TotalNumberOfSingleDPPPlanes[i][j] = 0;
@@ -4640,12 +4649,13 @@ void dml31_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l
 				v->ODMCombineEnableThisState[k] = v->ODMCombineEnablePerState[i][k];
 			}
 
-			if (v->NumberOfActivePlanes > 1 && mode_lib->project == DML_PROJECT_DCN315)
-				PatchDETBufferSizeInKByte(v->NumberOfActivePlanes, v->NoOfDPPThisState, v->ip.config_return_buffer_size_in_kbytes, &v->DETBufferSizeInKByte[0]);
+			if (v->NumberOfActivePlanes > 1 && mode_lib->project == DML_PROJECT_DCN315 && !v->DETSizeOverride[0])
+				PatchDETBufferSizeInKByte(v->NumberOfActivePlanes, v->NoOfDPPThisState, v->ip.config_return_buffer_size_in_kbytes, v->DETBufferSizeInKByte);
 			CalculateSwathAndDETConfiguration(
 					false,
 					v->NumberOfActivePlanes,
-					v->DETBufferSizeInKByte[0],
+					mode_lib->project == DML_PROJECT_DCN315 && v->DETSizeOverride[0],
+					v->DETBufferSizeInKByte,
 					v->MaximumSwathWidthLuma,
 					v->MaximumSwathWidthChroma,
 					v->SourceScan,
@@ -6557,7 +6567,8 @@ static void CalculateStutterEfficiency(
 static void CalculateSwathAndDETConfiguration(
 		bool ForceSingleDPP,
 		int NumberOfActivePlanes,
-		unsigned int DETBufferSizeInKByte,
+		bool DETSharedByAllDPP,
+		unsigned int DETBufferSizeInKByteA[],
 		double MaximumSwathWidthLuma[],
 		double MaximumSwathWidthChroma[],
 		enum scan_direction_class SourceScan[],
@@ -6641,6 +6652,10 @@ static void CalculateSwathAndDETConfiguration(
 
 	*ViewportSizeSupport = true;
 	for (k = 0; k < NumberOfActivePlanes; ++k) {
+		unsigned int DETBufferSizeInKByte = DETBufferSizeInKByteA[k];
+
+		if (DETSharedByAllDPP && DPPPerPlane[k])
+			DETBufferSizeInKByte /= DPPPerPlane[k];
 		if ((SourcePixelFormat[k] == dm_444_64 || SourcePixelFormat[k] == dm_444_32 || SourcePixelFormat[k] == dm_444_16 || SourcePixelFormat[k] == dm_mono_16
 				|| SourcePixelFormat[k] == dm_mono_8 || SourcePixelFormat[k] == dm_rgbe)) {
 			if (SurfaceTiling[k] == dm_sw_linear
diff --git a/drivers/gpu/drm/amd/display/dc/dml/display_mode_vba.c b/drivers/gpu/drm/amd/display/dc/dml/display_mode_vba.c
index 8e6585dab20ef..1070cf8701960 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/display_mode_vba.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/display_mode_vba.c
@@ -569,6 +569,10 @@ static void fetch_pipe_params(struct display_mode_lib *mode_lib)
 		mode_lib->vba.OutputLinkDPRate[mode_lib->vba.NumberOfActivePlanes] = dout->dp_rate;
 		mode_lib->vba.ODMUse[mode_lib->vba.NumberOfActivePlanes] = dst->odm_combine_policy;
 		mode_lib->vba.DETSizeOverride[mode_lib->vba.NumberOfActivePlanes] = src->det_size_override;
+		if (src->det_size_override)
+			mode_lib->vba.DETBufferSizeInKByte[mode_lib->vba.NumberOfActivePlanes] = src->det_size_override;
+		else
+			mode_lib->vba.DETBufferSizeInKByte[mode_lib->vba.NumberOfActivePlanes] = ip->det_buffer_size_kbytes;
 		//TODO: Need to assign correct values to dp_multistream vars
 		mode_lib->vba.OutputMultistreamEn[mode_lib->vba.NumberOfActiveSurfaces] = dout->dp_multistream_en;
 		mode_lib->vba.OutputMultistreamId[mode_lib->vba.NumberOfActiveSurfaces] = dout->dp_multistream_id;
@@ -783,6 +787,8 @@ static void fetch_pipe_params(struct display_mode_lib *mode_lib)
 					mode_lib->vba.pipe_plane[k] =
 							mode_lib->vba.NumberOfActivePlanes;
 					mode_lib->vba.DPPPerPlane[mode_lib->vba.NumberOfActivePlanes]++;
+					if (src_k->det_size_override)
+						mode_lib->vba.DETBufferSizeInKByte[mode_lib->vba.NumberOfActivePlanes] = src_k->det_size_override;
 					if (mode_lib->vba.SourceScan[mode_lib->vba.NumberOfActivePlanes]
 							== dm_horz) {
 						mode_lib->vba.ViewportWidth[mode_lib->vba.NumberOfActivePlanes] +=
-- 
2.39.2

[PATCH 6.1 044/228] drm/amd/display: fix dcn315 single stream crb allocation

[Greg Kroah-Hartman]

From: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>

[ Upstream commit 49f26218c344741cb3eaa740b1e44e960551a87f ]

Change to improve avoiding asymetric crb calculations for single stream
scenarios.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/amd/display/dc/dcn315/dcn315_resource.c   | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c b/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c
index 88c4a378daa12..b9b1e5ac4f538 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c
@@ -1662,6 +1662,10 @@ static bool allow_pixel_rate_crb(struct dc *dc, struct dc_state *context)
 	int i;
 	struct resource_context *res_ctx = &context->res_ctx;
 
+	/*Don't apply for single stream*/
+	if (context->stream_count < 2)
+		return false;
+
 	for (i = 0; i < dc->res_pool->pipe_count; i++) {
 		if (!res_ctx->pipe_ctx[i].stream)
 			continue;
@@ -1749,19 +1753,23 @@ static int dcn315_populate_dml_pipes_from_context(
 		pipe_cnt++;
 	}
 
-	/* Spread remaining unreserved crb evenly among all pipes, use default policy if not enough det or single pipe */
+	/* Spread remaining unreserved crb evenly among all pipes*/
 	if (pixel_rate_crb) {
 		for (i = 0, pipe_cnt = 0, crb_idx = 0; i < dc->res_pool->pipe_count; i++) {
 			pipe = &res_ctx->pipe_ctx[i];
 			if (!pipe->stream)
 				continue;
 
+			/* Do not use asymetric crb if not enough for pstate support */
+			if (remaining_det_segs < 0) {
+				pipes[pipe_cnt].pipe.src.det_size_override = 0;
+				continue;
+			}
+
 			if (!pipe->top_pipe && !pipe->prev_odm_pipe) {
 				bool split_required = pipe->stream->timing.pix_clk_100hz >= dcn_get_max_non_odm_pix_rate_100hz(&dc->dml.soc)
 						|| (pipe->plane_state && pipe->plane_state->src_rect.width > 5120);
 
-				if (remaining_det_segs < 0 || crb_pipes == 1)
-					pipes[pipe_cnt].pipe.src.det_size_override = 0;
 				if (remaining_det_segs > MIN_RESERVED_DET_SEGS)
 					pipes[pipe_cnt].pipe.src.det_size_override += (remaining_det_segs - MIN_RESERVED_DET_SEGS) / crb_pipes +
 							(crb_idx < (remaining_det_segs - MIN_RESERVED_DET_SEGS) % crb_pipes ? 1 : 0);
@@ -1777,6 +1785,7 @@ static int dcn315_populate_dml_pipes_from_context(
 				}
 				/* Convert segments into size for DML use */
 				pipes[pipe_cnt].pipe.src.det_size_override *= DCN3_15_CRB_SEGMENT_SIZE_KB;
+
 				crb_idx++;
 			}
 			pipe_cnt++;
-- 
2.39.2

[PATCH 6.1 045/228] drm/amd/display: Update correct DCN314 register header

[Greg Kroah-Hartman]

From: Cruise Hung <cruise.hung@amd.com>

[ Upstream commit 268182606f26434c5d3ebd0e86efcb0418dec487 ]

[Why]
The register header for DCN314 is not correct.

[How]
Update correct DCN314 register header.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Cruise Hung <cruise.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: cd2e31a9ab93 ("drm/amd/display: Set minimum requirement for using PSR-SU on Phoenix")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dmub/src/Makefile |  2 +-
 .../drm/amd/display/dmub/src/dmub_dcn314.c    | 62 +++++++++++++++++++
 .../drm/amd/display/dmub/src/dmub_dcn314.h    | 33 ++++++++++
 .../gpu/drm/amd/display/dmub/src/dmub_srv.c   |  5 +-
 4 files changed, 100 insertions(+), 2 deletions(-)
 create mode 100644 drivers/gpu/drm/amd/display/dmub/src/dmub_dcn314.c
 create mode 100644 drivers/gpu/drm/amd/display/dmub/src/dmub_dcn314.h

diff --git a/drivers/gpu/drm/amd/display/dmub/src/Makefile b/drivers/gpu/drm/amd/display/dmub/src/Makefile
index 0589ad4778eea..caf095aca8f3f 100644
--- a/drivers/gpu/drm/amd/display/dmub/src/Makefile
+++ b/drivers/gpu/drm/amd/display/dmub/src/Makefile
@@ -22,7 +22,7 @@
 
 DMUB = dmub_srv.o dmub_srv_stat.o dmub_reg.o dmub_dcn20.o dmub_dcn21.o
 DMUB += dmub_dcn30.o dmub_dcn301.o dmub_dcn302.o dmub_dcn303.o
-DMUB += dmub_dcn31.o dmub_dcn315.o dmub_dcn316.o
+DMUB += dmub_dcn31.o dmub_dcn314.o dmub_dcn315.o dmub_dcn316.o
 DMUB += dmub_dcn32.o
 
 AMD_DAL_DMUB = $(addprefix $(AMDDALPATH)/dmub/src/,$(DMUB))
diff --git a/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn314.c b/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn314.c
new file mode 100644
index 0000000000000..48a06dbd9be78
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn314.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2021 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#include "../dmub_srv.h"
+#include "dmub_reg.h"
+#include "dmub_dcn314.h"
+
+#include "dcn/dcn_3_1_4_offset.h"
+#include "dcn/dcn_3_1_4_sh_mask.h"
+
+#define DCN_BASE__INST0_SEG0                       0x00000012
+#define DCN_BASE__INST0_SEG1                       0x000000C0
+#define DCN_BASE__INST0_SEG2                       0x000034C0
+#define DCN_BASE__INST0_SEG3                       0x00009000
+#define DCN_BASE__INST0_SEG4                       0x02403C00
+#define DCN_BASE__INST0_SEG5                       0
+
+#define BASE_INNER(seg) DCN_BASE__INST0_SEG##seg
+#define CTX dmub
+#define REGS dmub->regs_dcn31
+#define REG_OFFSET_EXP(reg_name) (BASE(reg##reg_name##_BASE_IDX) + reg##reg_name)
+
+/* Registers. */
+
+const struct dmub_srv_dcn31_regs dmub_srv_dcn314_regs = {
+#define DMUB_SR(reg) REG_OFFSET_EXP(reg),
+	{
+		DMUB_DCN31_REGS()
+		DMCUB_INTERNAL_REGS()
+	},
+#undef DMUB_SR
+
+#define DMUB_SF(reg, field) FD_MASK(reg, field),
+	{ DMUB_DCN31_FIELDS() },
+#undef DMUB_SF
+
+#define DMUB_SF(reg, field) FD_SHIFT(reg, field),
+	{ DMUB_DCN31_FIELDS() },
+#undef DMUB_SF
+};
diff --git a/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn314.h b/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn314.h
new file mode 100644
index 0000000000000..674267a2940e9
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn314.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2021 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#ifndef _DMUB_DCN314_H_
+#define _DMUB_DCN314_H_
+
+#include "dmub_dcn31.h"
+
+extern const struct dmub_srv_dcn31_regs dmub_srv_dcn314_regs;
+
+#endif /* _DMUB_DCN314_H_ */
diff --git a/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c b/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c
index 92c18bfb98b3b..6d76ce327d69f 100644
--- a/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c
+++ b/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c
@@ -32,6 +32,7 @@
 #include "dmub_dcn302.h"
 #include "dmub_dcn303.h"
 #include "dmub_dcn31.h"
+#include "dmub_dcn314.h"
 #include "dmub_dcn315.h"
 #include "dmub_dcn316.h"
 #include "dmub_dcn32.h"
@@ -226,7 +227,9 @@ static bool dmub_srv_hw_setup(struct dmub_srv *dmub, enum dmub_asic asic)
 	case DMUB_ASIC_DCN314:
 	case DMUB_ASIC_DCN315:
 	case DMUB_ASIC_DCN316:
-		if (asic == DMUB_ASIC_DCN315)
+		if (asic == DMUB_ASIC_DCN314)
+			dmub->regs_dcn31 = &dmub_srv_dcn314_regs;
+		else if (asic == DMUB_ASIC_DCN315)
 			dmub->regs_dcn31 = &dmub_srv_dcn315_regs;
 		else if (asic == DMUB_ASIC_DCN316)
 			dmub->regs_dcn31 = &dmub_srv_dcn316_regs;
-- 
2.39.2

[PATCH 6.1 046/228] drm/amd/display: Set minimum requirement for using PSR-SU on Rembrandt

[Greg Kroah-Hartman]

From: Mario Limonciello <mario.limonciello@amd.com>

[ Upstream commit c35b6ea8f2ecfa9d775530b70d4e727869099a9c ]

A number of parade TCONs are causing system hangs when utilized with
older DMUB firmware and PSR-SU. Some changes have been introduced into
DMUB firmware to add resilience against these failures.

Don't allow running PSR-SU unless on the newer firmware.

Cc: stable@vger.kernel.org
Cc: Sean Wang <sean.ns.wang@amd.com>
Cc: Marc Rossi <Marc.Rossi@amd.com>
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Cc: Tsung-hua (Ryan) Lin <Tsung-hua.Lin@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2443
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: cd2e31a9ab93 ("drm/amd/display: Set minimum requirement for using PSR-SU on Phoenix")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c |  3 ++-
 drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c          |  7 +++++++
 drivers/gpu/drm/amd/display/dc/dc_dmub_srv.h          |  1 +
 drivers/gpu/drm/amd/display/dmub/dmub_srv.h           |  2 ++
 drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.c     |  5 +++++
 drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.h     |  2 ++
 drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c       | 10 ++++++----
 7 files changed, 25 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c
index 872d06fe14364..3eb8794807d2b 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c
@@ -24,6 +24,7 @@
  */
 
 #include "amdgpu_dm_psr.h"
+#include "dc_dmub_srv.h"
 #include "dc.h"
 #include "dm_helpers.h"
 #include "amdgpu_dm.h"
@@ -50,7 +51,7 @@ static bool link_supports_psrsu(struct dc_link *link)
 	    !link->dpcd_caps.psr_info.psr2_su_y_granularity_cap)
 		return false;
 
-	return true;
+	return dc_dmub_check_min_version(dc->ctx->dmub_srv->dmub);
 }
 
 /*
diff --git a/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c b/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c
index a461e9463534b..31bb7e782c6b1 100644
--- a/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c
+++ b/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c
@@ -1026,3 +1026,10 @@ void dc_send_update_cursor_info_to_dmu(
 		dc_send_cmd_to_dmu(pCtx->stream->ctx->dmub_srv, &cmd);
 	}
 }
+
+bool dc_dmub_check_min_version(struct dmub_srv *srv)
+{
+	if (!srv->hw_funcs.is_psrsu_supported)
+		return true;
+	return srv->hw_funcs.is_psrsu_supported(srv);
+}
diff --git a/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.h b/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.h
index d34f5563df2ec..9a248ced03b9c 100644
--- a/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.h
+++ b/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.h
@@ -89,4 +89,5 @@ void dc_dmub_setup_subvp_dmub_command(struct dc *dc, struct dc_state *context, b
 void dc_dmub_srv_log_diagnostic_data(struct dc_dmub_srv *dc_dmub_srv);
 
 void dc_send_update_cursor_info_to_dmu(struct pipe_ctx *pCtx, uint8_t pipe_idx);
+bool dc_dmub_check_min_version(struct dmub_srv *srv);
 #endif /* _DMUB_DC_SRV_H_ */
diff --git a/drivers/gpu/drm/amd/display/dmub/dmub_srv.h b/drivers/gpu/drm/amd/display/dmub/dmub_srv.h
index b53468aca4a9b..5f17b252e9be4 100644
--- a/drivers/gpu/drm/amd/display/dmub/dmub_srv.h
+++ b/drivers/gpu/drm/amd/display/dmub/dmub_srv.h
@@ -350,6 +350,8 @@ struct dmub_srv_hw_funcs {
 
 	bool (*is_supported)(struct dmub_srv *dmub);
 
+	bool (*is_psrsu_supported)(struct dmub_srv *dmub);
+
 	bool (*is_hw_init)(struct dmub_srv *dmub);
 
 	bool (*is_phy_init)(struct dmub_srv *dmub);
diff --git a/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.c b/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.c
index c90b9ee42e126..89d24fb7024e2 100644
--- a/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.c
+++ b/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.c
@@ -297,6 +297,11 @@ bool dmub_dcn31_is_supported(struct dmub_srv *dmub)
 	return supported;
 }
 
+bool dmub_dcn31_is_psrsu_supported(struct dmub_srv *dmub)
+{
+	return dmub->fw_version >= DMUB_FW_VERSION(4, 0, 59);
+}
+
 void dmub_dcn31_set_gpint(struct dmub_srv *dmub,
 			  union dmub_gpint_data_register reg)
 {
diff --git a/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.h b/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.h
index f6db6f89d45dc..eb62410941473 100644
--- a/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.h
+++ b/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.h
@@ -219,6 +219,8 @@ bool dmub_dcn31_is_hw_init(struct dmub_srv *dmub);
 
 bool dmub_dcn31_is_supported(struct dmub_srv *dmub);
 
+bool dmub_dcn31_is_psrsu_supported(struct dmub_srv *dmub);
+
 void dmub_dcn31_set_gpint(struct dmub_srv *dmub,
 			  union dmub_gpint_data_register reg);
 
diff --git a/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c b/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c
index 6d76ce327d69f..0f43a05a41874 100644
--- a/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c
+++ b/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c
@@ -227,14 +227,16 @@ static bool dmub_srv_hw_setup(struct dmub_srv *dmub, enum dmub_asic asic)
 	case DMUB_ASIC_DCN314:
 	case DMUB_ASIC_DCN315:
 	case DMUB_ASIC_DCN316:
-		if (asic == DMUB_ASIC_DCN314)
+		if (asic == DMUB_ASIC_DCN314) {
 			dmub->regs_dcn31 = &dmub_srv_dcn314_regs;
-		else if (asic == DMUB_ASIC_DCN315)
+		} else if (asic == DMUB_ASIC_DCN315) {
 			dmub->regs_dcn31 = &dmub_srv_dcn315_regs;
-		else if (asic == DMUB_ASIC_DCN316)
+		} else if (asic == DMUB_ASIC_DCN316) {
 			dmub->regs_dcn31 = &dmub_srv_dcn316_regs;
-		else
+		} else {
 			dmub->regs_dcn31 = &dmub_srv_dcn31_regs;
+			funcs->is_psrsu_supported = dmub_dcn31_is_psrsu_supported;
+		}
 		funcs->reset = dmub_dcn31_reset;
 		funcs->reset_release = dmub_dcn31_reset_release;
 		funcs->backdoor_load = dmub_dcn31_backdoor_load;
-- 
2.39.2

[PATCH 6.1 047/228] drm/amd/display: Set minimum requirement for using PSR-SU on Phoenix

[Greg Kroah-Hartman]

From: Mario Limonciello <mario.limonciello@amd.com>

[ Upstream commit cd2e31a9ab93d13c412a36c6e26811e0f830985b ]

The same parade TCON issue can potentially happen on Phoenix, and the same
PSR resilience changes have been ported into the DMUB firmware.

Don't allow running PSR-SU unless on the newer firmware.

Cc: stable@vger.kernel.org
Cc: Sean Wang <sean.ns.wang@amd.com>
Cc: Marc Rossi <Marc.Rossi@amd.com>
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Cc: Tsung-hua (Ryan) Lin <Tsung-hua.Lin@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dmub/src/dmub_dcn314.c | 5 +++++
 drivers/gpu/drm/amd/display/dmub/src/dmub_dcn314.h | 2 ++
 drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c    | 1 +
 3 files changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn314.c b/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn314.c
index 48a06dbd9be78..f161aeb7e7c4a 100644
--- a/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn314.c
+++ b/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn314.c
@@ -60,3 +60,8 @@ const struct dmub_srv_dcn31_regs dmub_srv_dcn314_regs = {
 	{ DMUB_DCN31_FIELDS() },
 #undef DMUB_SF
 };
+
+bool dmub_dcn314_is_psrsu_supported(struct dmub_srv *dmub)
+{
+	return dmub->fw_version >= DMUB_FW_VERSION(8, 0, 16);
+}
diff --git a/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn314.h b/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn314.h
index 674267a2940e9..f213bd82c9110 100644
--- a/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn314.h
+++ b/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn314.h
@@ -30,4 +30,6 @@
 
 extern const struct dmub_srv_dcn31_regs dmub_srv_dcn314_regs;
 
+bool dmub_dcn314_is_psrsu_supported(struct dmub_srv *dmub);
+
 #endif /* _DMUB_DCN314_H_ */
diff --git a/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c b/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c
index 0f43a05a41874..0dab22d794808 100644
--- a/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c
+++ b/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c
@@ -229,6 +229,7 @@ static bool dmub_srv_hw_setup(struct dmub_srv *dmub, enum dmub_asic asic)
 	case DMUB_ASIC_DCN316:
 		if (asic == DMUB_ASIC_DCN314) {
 			dmub->regs_dcn31 = &dmub_srv_dcn314_regs;
+			funcs->is_psrsu_supported = dmub_dcn314_is_psrsu_supported;
 		} else if (asic == DMUB_ASIC_DCN315) {
 			dmub->regs_dcn31 = &dmub_srv_dcn315_regs;
 		} else if (asic == DMUB_ASIC_DCN316) {
-- 
2.39.2

[PATCH 6.1 048/228] drm/ttm: Dont print error message if eviction was interrupted

[Greg Kroah-Hartman]

From: Thomas Hellström <thomas.hellstrom@linux.intel.com>

[ Upstream commit 8ab3b0663e279ab550bc2c0b5d602960e8b94e02 ]

Avoid printing an error message if eviction was interrupted by,
for example, the user pressing CTRL-C. That may happen if eviction
is waiting for something, like for example a free batch-buffer.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230307144621.10748-6-thomas.hellstrom@linux.intel.com
Stable-dep-of: e8188c461ee0 ("drm/ttm: Don't leak a resource on eviction error")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/ttm/ttm_bo.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index f2c4e9037d6e0..85f7f5cd4589a 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -504,7 +504,8 @@ static int ttm_bo_evict(struct ttm_buffer_object *bo,
 	if (ret == -EMULTIHOP) {
 		ret = ttm_bo_bounce_temp_buffer(bo, &evict_mem, ctx, &hop);
 		if (ret) {
-			pr_err("Buffer eviction failed\n");
+			if (ret != -ERESTARTSYS && ret != -EINTR)
+				pr_err("Buffer eviction failed\n");
 			ttm_resource_free(bo, &evict_mem);
 			goto out;
 		}
-- 
2.39.2

[PATCH 6.1 049/228] drm/ttm: Dont leak a resource on eviction error

[Greg Kroah-Hartman]

From: Thomas Hellström <thomas.hellstrom@linux.intel.com>

[ Upstream commit e8188c461ee015ba0b9ab2fc82dbd5ebca5a5532 ]

On eviction errors other than -EMULTIHOP we were leaking a resource.
Fix.

v2:
- Avoid yet another goto (Andi Shyti)

Fixes: 403797925768 ("drm/ttm: Fix multihop assert on eviction.")
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.15+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> #v1
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230626091450.14757-4-thomas.hellstrom@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/ttm/ttm_bo.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index 85f7f5cd4589a..1c891b5839316 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -499,18 +499,18 @@ static int ttm_bo_evict(struct ttm_buffer_object *bo,
 		goto out;
 	}
 
-bounce:
-	ret = ttm_bo_handle_move_mem(bo, evict_mem, true, ctx, &hop);
-	if (ret == -EMULTIHOP) {
+	do {
+		ret = ttm_bo_handle_move_mem(bo, evict_mem, true, ctx, &hop);
+		if (ret != -EMULTIHOP)
+			break;
+
 		ret = ttm_bo_bounce_temp_buffer(bo, &evict_mem, ctx, &hop);
-		if (ret) {
-			if (ret != -ERESTARTSYS && ret != -EINTR)
-				pr_err("Buffer eviction failed\n");
-			ttm_resource_free(bo, &evict_mem);
-			goto out;
-		}
-		/* try and move to final place now. */
-		goto bounce;
+	} while (!ret);
+
+	if (ret) {
+		ttm_resource_free(bo, &evict_mem);
+		if (ret != -ERESTARTSYS && ret != -EINTR)
+			pr_err("Buffer eviction failed\n");
 	}
 out:
 	return ret;
-- 
2.39.2

[PATCH 6.1 050/228] n_tty: Rename tail to old_tail in n_tty_read()

[Greg Kroah-Hartman]

From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

[ Upstream commit 947d66b68f3c4e7cf8f3f3500807b9d2a0de28ce ]

The local tail variable in n_tty_read() is used for one purpose, it
keeps the old tail. Thus, rename it appropriately to improve code
readability.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/22b37499-ff9a-7fc1-f6e0-58411328d122@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 4903fde8047a ("tty: fix hang on tty device with no_room set")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/n_tty.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 597019690ae62..c8f56c9b1a1c8 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -2130,7 +2130,7 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
 	ssize_t retval = 0;
 	long timeout;
 	bool packet;
-	size_t tail;
+	size_t old_tail;
 
 	/*
 	 * Is this a continuation of a read started earler?
@@ -2193,7 +2193,7 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
 	}
 
 	packet = tty->ctrl.packet;
-	tail = ldata->read_tail;
+	old_tail = ldata->read_tail;
 
 	add_wait_queue(&tty->read_wait, &wait);
 	while (nr) {
@@ -2282,7 +2282,7 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
 		if (time)
 			timeout = time;
 	}
-	if (tail != ldata->read_tail)
+	if (old_tail != ldata->read_tail)
 		n_tty_kick_worker(tty);
 	up_read(&tty->termios_rwsem);
 
-- 
2.39.2

[PATCH 6.1 051/228] tty: fix hang on tty device with no_room set

[Greg Kroah-Hartman]

From: Hui Li <caelli@tencent.com>

[ Upstream commit 4903fde8047a28299d1fc79c1a0dcc255e928f12 ]

It is possible to hang pty devices in this case, the reader was
blocking at epoll on master side, the writer was sleeping at
wait_woken inside n_tty_write on slave side, and the write buffer
on tty_port was full, we found that the reader and writer would
never be woken again and blocked forever.

The problem was caused by a race between reader and kworker:
n_tty_read(reader):  n_tty_receive_buf_common(kworker):
copy_from_read_buf()|
                    |room = N_TTY_BUF_SIZE - (ldata->read_head - tail)
                    |room <= 0
n_tty_kick_worker() |
                    |ldata->no_room = true

After writing to slave device, writer wakes up kworker to flush
data on tty_port to reader, and the kworker finds that reader
has no room to store data so room <= 0 is met. At this moment,
reader consumes all the data on reader buffer and calls
n_tty_kick_worker to check ldata->no_room which is false and
reader quits reading. Then kworker sets ldata->no_room=true
and quits too.

If write buffer is not full, writer will wake kworker to flush data
again after following writes, but if write buffer is full and writer
goes to sleep, kworker will never be woken again and tty device is
blocked.

This problem can be solved with a check for read buffer size inside
n_tty_receive_buf_common, if read buffer is empty and ldata->no_room
is true, a call to n_tty_kick_worker is necessary to keep flushing
data to reader.

Cc: <stable@vger.kernel.org>
Fixes: 42458f41d08f ("n_tty: Ensure reader restarts worker for next reader")
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Hui Li <caelli@tencent.com>
Message-ID: <1680749090-14106-1-git-send-email-caelli@tencent.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/n_tty.c | 25 +++++++++++++++++++++----
 1 file changed, 21 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index c8f56c9b1a1c8..4dff2f34e2d06 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -204,8 +204,8 @@ static void n_tty_kick_worker(struct tty_struct *tty)
 	struct n_tty_data *ldata = tty->disc_data;
 
 	/* Did the input worker stop? Restart it */
-	if (unlikely(ldata->no_room)) {
-		ldata->no_room = 0;
+	if (unlikely(READ_ONCE(ldata->no_room))) {
+		WRITE_ONCE(ldata->no_room, 0);
 
 		WARN_RATELIMIT(tty->port->itty == NULL,
 				"scheduling with invalid itty\n");
@@ -1698,7 +1698,7 @@ n_tty_receive_buf_common(struct tty_struct *tty, const unsigned char *cp,
 			if (overflow && room < 0)
 				ldata->read_head--;
 			room = overflow;
-			ldata->no_room = flow && !room;
+			WRITE_ONCE(ldata->no_room, flow && !room);
 		} else
 			overflow = 0;
 
@@ -1729,6 +1729,17 @@ n_tty_receive_buf_common(struct tty_struct *tty, const unsigned char *cp,
 	} else
 		n_tty_check_throttle(tty);
 
+	if (unlikely(ldata->no_room)) {
+		/*
+		 * Barrier here is to ensure to read the latest read_tail in
+		 * chars_in_buffer() and to make sure that read_tail is not loaded
+		 * before ldata->no_room is set.
+		 */
+		smp_mb();
+		if (!chars_in_buffer(tty))
+			n_tty_kick_worker(tty);
+	}
+
 	up_read(&tty->termios_rwsem);
 
 	return rcvd;
@@ -2282,8 +2293,14 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
 		if (time)
 			timeout = time;
 	}
-	if (old_tail != ldata->read_tail)
+	if (old_tail != ldata->read_tail) {
+		/*
+		 * Make sure no_room is not read in n_tty_kick_worker()
+		 * before setting ldata->read_tail in copy_from_read_buf().
+		 */
+		smp_mb();
 		n_tty_kick_worker(tty);
+	}
 	up_read(&tty->termios_rwsem);
 
 	remove_wait_queue(&tty->read_wait, &wait);
-- 
2.39.2

[PATCH 6.1 052/228] drm/ttm: never consider pinned BOs for eviction&swap

[Greg Kroah-Hartman]

From: Christian König <christian.koenig@amd.com>

[ Upstream commit a2848d08742c8e8494675892c02c0d22acbe3cf8 ]

There is a small window where we have already incremented the pin count
but not yet moved the bo from the lru to the pinned list.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: Pelloux-Prayer, Pierre-Eric <Pierre-eric.Pelloux-prayer@amd.com>
Tested-by: Pelloux-Prayer, Pierre-Eric <Pierre-eric.Pelloux-prayer@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20230707120826.3701-1-christian.koenig@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/ttm/ttm_bo.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index 1c891b5839316..f7aeeee6f5266 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -550,6 +550,12 @@ static bool ttm_bo_evict_swapout_allowable(struct ttm_buffer_object *bo,
 {
 	bool ret = false;
 
+	if (bo->pin_count) {
+		*locked = false;
+		*busy = false;
+		return false;
+	}
+
 	if (bo->base.resv == ctx->resv) {
 		dma_resv_assert_held(bo->base.resv);
 		if (ctx->allow_res_evict)
-- 
2.39.2

[PATCH 6.1 053/228] KVM: arm64: Condition HW AF updates on config option

[Greg Kroah-Hartman]

From: Oliver Upton <oliver.upton@linux.dev>

[ Upstream commit 1dfc3e905089a0bcada268fb5691a605655e0319 ]

As it currently stands, KVM makes use of FEAT_HAFDBS unconditionally.
Use of the feature in the rest of the kernel is guarded by an associated
Kconfig option.

Align KVM with the rest of the kernel and only enable VTCR_HA when
ARM64_HW_AFDBM is enabled. This can be helpful for testing changes to
the stage-2 access fault path on Armv8.1+ implementations.

Link: https://lore.kernel.org/r/20221202185156.696189-7-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Stable-dep-of: 6df696cd9bc1 ("arm64: errata: Mitigate Ampere1 erratum AC03_CPU_38 at stage-2")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kvm/hyp/pgtable.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/kvm/hyp/pgtable.c b/arch/arm64/kvm/hyp/pgtable.c
index cdf8e76b0be14..8f37e65c23eea 100644
--- a/arch/arm64/kvm/hyp/pgtable.c
+++ b/arch/arm64/kvm/hyp/pgtable.c
@@ -595,12 +595,14 @@ u64 kvm_get_vtcr(u64 mmfr0, u64 mmfr1, u32 phys_shift)
 		lvls = 2;
 	vtcr |= VTCR_EL2_LVLS_TO_SL0(lvls);
 
+#ifdef CONFIG_ARM64_HW_AFDBM
 	/*
 	 * Enable the Hardware Access Flag management, unconditionally
 	 * on all CPUs. The features is RES0 on CPUs without the support
 	 * and must be ignored by the CPUs.
 	 */
 	vtcr |= VTCR_EL2_HA;
+#endif /* CONFIG_ARM64_HW_AFDBM */
 
 	/* Set the vmid bits */
 	vtcr |= (get_vmid_bits(mmfr1) == 16) ?
-- 
2.39.2

[PATCH 6.1 054/228] arm64: errata: Mitigate Ampere1 erratum AC03_CPU_38 at stage-2

[Greg Kroah-Hartman]

From: Oliver Upton <oliver.upton@linux.dev>

[ Upstream commit 6df696cd9bc1ceed0e92e36908f88bbd16d18255 ]

AmpereOne has an erratum in its implementation of FEAT_HAFDBS that
required disabling the feature on the design. This was done by reporting
the feature as not implemented in the ID register, although the
corresponding control bits were not actually RES0. This does not align
well with the requirements of the architecture, which mandates these
bits be RES0 if HAFDBS isn't implemented.

The kernel's use of stage-1 is unaffected, as the HA and HD bits are
only set if HAFDBS is detected in the ID register. KVM, on the other
hand, relies on the RES0 behavior at stage-2 to use the same value for
VTCR_EL2 on any cpu in the system. Mitigate the non-RES0 behavior by
leaving VTCR_EL2.HA clear on affected systems.

Cc: stable@vger.kernel.org
Cc: D Scott Phillips <scott@os.amperecomputing.com>
Cc: Darren Hart <darren@os.amperecomputing.com>
Acked-by: D Scott Phillips <scott@os.amperecomputing.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20230609220104.1836988-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/arm64/silicon-errata.rst |  3 +++
 arch/arm64/Kconfig                     | 19 +++++++++++++++++++
 arch/arm64/kernel/cpu_errata.c         |  7 +++++++
 arch/arm64/kvm/hyp/pgtable.c           | 14 +++++++++++---
 arch/arm64/tools/cpucaps               |  1 +
 5 files changed, 41 insertions(+), 3 deletions(-)

diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst
index 55492fea44276..bbc80eff03f98 100644
--- a/Documentation/arm64/silicon-errata.rst
+++ b/Documentation/arm64/silicon-errata.rst
@@ -52,6 +52,9 @@ stable kernels.
 | Allwinner      | A64/R18         | UNKNOWN1        | SUN50I_ERRATUM_UNKNOWN1     |
 +----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
+| Ampere         | AmpereOne       | AC03_CPU_38     | AMPERE_ERRATUM_AC03_CPU_38  |
++----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A510     | #2457168        | ARM64_ERRATUM_2457168       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A510     | #2064142        | ARM64_ERRATUM_2064142       |
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 20ee745c118ae..d5eb2fbab473e 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -376,6 +376,25 @@ menu "Kernel Features"
 
 menu "ARM errata workarounds via the alternatives framework"
 
+config AMPERE_ERRATUM_AC03_CPU_38
+        bool "AmpereOne: AC03_CPU_38: Certain bits in the Virtualization Translation Control Register and Translation Control Registers do not follow RES0 semantics"
+	default y
+	help
+	  This option adds an alternative code sequence to work around Ampere
+	  erratum AC03_CPU_38 on AmpereOne.
+
+	  The affected design reports FEAT_HAFDBS as not implemented in
+	  ID_AA64MMFR1_EL1.HAFDBS, but (V)TCR_ELx.{HA,HD} are not RES0
+	  as required by the architecture. The unadvertised HAFDBS
+	  implementation suffers from an additional erratum where hardware
+	  A/D updates can occur after a PTE has been marked invalid.
+
+	  The workaround forces KVM to explicitly set VTCR_EL2.HA to 0,
+	  which avoids enabling unadvertised hardware Access Flag management
+	  at stage-2.
+
+	  If unsure, say Y.
+
 config ARM64_WORKAROUND_CLEAN_CACHE
 	bool
 
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index 89ac00084f38a..8dbf3c21ea22a 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -722,6 +722,13 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		MIDR_FIXED(MIDR_CPU_VAR_REV(1,1), BIT(25)),
 		.cpu_enable = cpu_clear_bf16_from_user_emulation,
 	},
+#endif
+#ifdef CONFIG_AMPERE_ERRATUM_AC03_CPU_38
+	{
+		.desc = "AmpereOne erratum AC03_CPU_38",
+		.capability = ARM64_WORKAROUND_AMPERE_AC03_CPU_38,
+		ERRATA_MIDR_ALL_VERSIONS(MIDR_AMPERE1),
+	},
 #endif
 	{
 	}
diff --git a/arch/arm64/kvm/hyp/pgtable.c b/arch/arm64/kvm/hyp/pgtable.c
index 8f37e65c23eea..ae5f6b5ac80fd 100644
--- a/arch/arm64/kvm/hyp/pgtable.c
+++ b/arch/arm64/kvm/hyp/pgtable.c
@@ -598,10 +598,18 @@ u64 kvm_get_vtcr(u64 mmfr0, u64 mmfr1, u32 phys_shift)
 #ifdef CONFIG_ARM64_HW_AFDBM
 	/*
 	 * Enable the Hardware Access Flag management, unconditionally
-	 * on all CPUs. The features is RES0 on CPUs without the support
-	 * and must be ignored by the CPUs.
+	 * on all CPUs. In systems that have asymmetric support for the feature
+	 * this allows KVM to leverage hardware support on the subset of cores
+	 * that implement the feature.
+	 *
+	 * The architecture requires VTCR_EL2.HA to be RES0 (thus ignored by
+	 * hardware) on implementations that do not advertise support for the
+	 * feature. As such, setting HA unconditionally is safe, unless you
+	 * happen to be running on a design that has unadvertised support for
+	 * HAFDBS. Here be dragons.
 	 */
-	vtcr |= VTCR_EL2_HA;
+	if (!cpus_have_final_cap(ARM64_WORKAROUND_AMPERE_AC03_CPU_38))
+		vtcr |= VTCR_EL2_HA;
 #endif /* CONFIG_ARM64_HW_AFDBM */
 
 	/* Set the vmid bits */
diff --git a/arch/arm64/tools/cpucaps b/arch/arm64/tools/cpucaps
index f1c0347ec31a8..14d31d1b2ff02 100644
--- a/arch/arm64/tools/cpucaps
+++ b/arch/arm64/tools/cpucaps
@@ -71,6 +71,7 @@ WORKAROUND_2064142
 WORKAROUND_2077057
 WORKAROUND_2457168
 WORKAROUND_2658417
+WORKAROUND_AMPERE_AC03_CPU_38
 WORKAROUND_TRBE_OVERWRITE_FILL_MODE
 WORKAROUND_TSB_FLUSH_FAILURE
 WORKAROUND_TRBE_WRITE_OUT_OF_RANGE
-- 
2.39.2

[PATCH 6.1 055/228] mptcp: introduce sk to replace sock->sk in mptcp_listen()

[Greg Kroah-Hartman]

From: Menglong Dong <imagedong@tencent.com>

[ Upstream commit cfdcfeed6449d702825d249cb85346ecf56236fc ]

'sock->sk' is used frequently in mptcp_listen(). Therefore, we can
introduce the 'sk' and replace 'sock->sk' with it.

Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 0226436acf24 ("mptcp: do not rely on implicit state check in mptcp_listen()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mptcp/protocol.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c
index 4ca61e80f4bb2..208da9a9909c2 100644
--- a/net/mptcp/protocol.c
+++ b/net/mptcp/protocol.c
@@ -3746,12 +3746,13 @@ static int mptcp_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
 static int mptcp_listen(struct socket *sock, int backlog)
 {
 	struct mptcp_sock *msk = mptcp_sk(sock->sk);
+	struct sock *sk = sock->sk;
 	struct socket *ssock;
 	int err;
 
 	pr_debug("msk=%p", msk);
 
-	lock_sock(sock->sk);
+	lock_sock(sk);
 	ssock = __mptcp_nmpc_socket(msk);
 	if (!ssock) {
 		err = -EINVAL;
@@ -3759,16 +3760,16 @@ static int mptcp_listen(struct socket *sock, int backlog)
 	}
 
 	mptcp_token_destroy(msk);
-	inet_sk_state_store(sock->sk, TCP_LISTEN);
-	sock_set_flag(sock->sk, SOCK_RCU_FREE);
+	inet_sk_state_store(sk, TCP_LISTEN);
+	sock_set_flag(sk, SOCK_RCU_FREE);
 
 	err = ssock->ops->listen(ssock, backlog);
-	inet_sk_state_store(sock->sk, inet_sk_state_load(ssock->sk));
+	inet_sk_state_store(sk, inet_sk_state_load(ssock->sk));
 	if (!err)
-		mptcp_copy_inaddrs(sock->sk, ssock->sk);
+		mptcp_copy_inaddrs(sk, ssock->sk);
 
 unlock:
-	release_sock(sock->sk);
+	release_sock(sk);
 	return err;
 }
 
-- 
2.39.2

[PATCH 6.1 056/228] mptcp: do not rely on implicit state check in mptcp_listen()

[Greg Kroah-Hartman]

From: Paolo Abeni <pabeni@redhat.com>

[ Upstream commit 0226436acf2495cde4b93e7400e5a87305c26054 ]

Since the blamed commit, closing the first subflow resets the first
subflow socket state to SS_UNCONNECTED.

The current mptcp listen implementation relies only on such
state to prevent touching not-fully-disconnected sockets.

Incoming mptcp fastclose (or paired endpoint removal) unconditionally
closes the first subflow.

All the above allows an incoming fastclose followed by a listen() call
to successfully race with a blocking recvmsg(), potentially causing the
latter to hit a divide by zero bug in cleanup_rbuf/__tcp_select_window().

Address the issue explicitly checking the msk socket state in
mptcp_listen(). An alternative solution would be moving the first
subflow socket state update into mptcp_disconnect(), but in the long
term the first subflow socket should be removed: better avoid relaying
on it for internal consistency check.

Fixes: b29fcfb54cd7 ("mptcp: full disconnect implementation")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/414
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mptcp/protocol.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c
index 208da9a9909c2..37ff6766fd526 100644
--- a/net/mptcp/protocol.c
+++ b/net/mptcp/protocol.c
@@ -3753,6 +3753,11 @@ static int mptcp_listen(struct socket *sock, int backlog)
 	pr_debug("msk=%p", msk);
 
 	lock_sock(sk);
+
+	err = -EINVAL;
+	if (sock->state != SS_UNCONNECTED || sock->type != SOCK_STREAM)
+		goto unlock;
+
 	ssock = __mptcp_nmpc_socket(msk);
 	if (!ssock) {
 		err = -EINVAL;
-- 
2.39.2

[PATCH 6.1 057/228] tracing/probes: Add symstr type for dynamic events

[Greg Kroah-Hartman]

From: Masami Hiramatsu (Google) <mhiramat@kernel.org>

[ Upstream commit b26a124cbfa80f42bfc4e63e1d5643ca98159d66 ]

Add 'symstr' type for storing the kernel symbol as a string data
instead of the symbol address. This allows us to filter the
events by wildcard symbol name.

e.g.
  # echo 'e:wqfunc workqueue.workqueue_execute_start symname=$function:symstr' >> dynamic_events
  # cat events/eprobes/wqfunc/format
  name: wqfunc
  ID: 2110
  format:
  	field:unsigned short common_type;	offset:0;	size:2;	signed:0;
  	field:unsigned char common_flags;	offset:2;	size:1;	signed:0;
  	field:unsigned char common_preempt_count;	offset:3;	size:1;	signed:0;
  	field:int common_pid;	offset:4;	size:4;	signed:1;

  	field:__data_loc char[] symname;	offset:8;	size:4;	signed:1;

  print fmt: " symname=\"%s\"", __get_str(symname)

Note that there is already 'symbol' type which just change the
print format (so it still stores the symbol address in the tracing
ring buffer.) On the other hand, 'symstr' type stores the actual
"symbol+offset/size" data as a string.

Link: https://lore.kernel.org/all/166679930847.1528100.4124308529180235965.stgit@devnote3/

Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Stable-dep-of: 66bcf65d6cf0 ("tracing/probes: Fix to avoid double count of the string length on the array")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/trace/kprobetrace.rst |  8 +++--
 kernel/trace/trace.c                |  2 +-
 kernel/trace/trace_probe.c          | 44 ++++++++++++++++++---------
 kernel/trace/trace_probe.h          | 16 +++++++---
 kernel/trace/trace_probe_tmpl.h     | 47 +++++++++++++++++++++++++++--
 5 files changed, 91 insertions(+), 26 deletions(-)

diff --git a/Documentation/trace/kprobetrace.rst b/Documentation/trace/kprobetrace.rst
index 4274cc6a2f94f..08a2a6a3782f0 100644
--- a/Documentation/trace/kprobetrace.rst
+++ b/Documentation/trace/kprobetrace.rst
@@ -58,8 +58,8 @@ Synopsis of kprobe_events
   NAME=FETCHARG : Set NAME as the argument name of FETCHARG.
   FETCHARG:TYPE : Set TYPE as the type of FETCHARG. Currently, basic types
 		  (u8/u16/u32/u64/s8/s16/s32/s64), hexadecimal types
-		  (x8/x16/x32/x64), "string", "ustring" and bitfield
-		  are supported.
+		  (x8/x16/x32/x64), "string", "ustring", "symbol", "symstr"
+                  and bitfield are supported.
 
   (\*1) only for the probe on function entry (offs == 0).
   (\*2) only for return probe.
@@ -96,6 +96,10 @@ offset, and container-size (usually 32). The syntax is::
 
 Symbol type('symbol') is an alias of u32 or u64 type (depends on BITS_PER_LONG)
 which shows given pointer in "symbol+offset" style.
+On the other hand, symbol-string type ('symstr') converts the given address to
+"symbol+offset/symbolsize" style and stores it as a null-terminated string.
+With 'symstr' type, you can filter the event with wildcard pattern of the
+symbols, and you don't need to solve symbol name by yourself.
 For $comm, the default type is "string"; any other type is invalid.
 
 .. _user_mem_access:
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 27bbe180a2ef2..709af9631be45 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -5627,7 +5627,7 @@ static const char readme_msg[] =
 	"\t           +|-[u]<offset>(<fetcharg>), \\imm-value, \\\"imm-string\"\n"
 	"\t     type: s8/16/32/64, u8/16/32/64, x8/16/32/64, string, symbol,\n"
 	"\t           b<bit-width>@<bit-offset>/<container-size>, ustring,\n"
-	"\t           <type>\\[<array-size>\\]\n"
+	"\t           symstr, <type>\\[<array-size>\\]\n"
 #ifdef CONFIG_HIST_TRIGGERS
 	"\t    field: <stype> <name>;\n"
 	"\t    stype: u8/u16/u32/u64, s8/s16/s32/s64, pid_t,\n"
diff --git a/kernel/trace/trace_probe.c b/kernel/trace/trace_probe.c
index bb2f95d7175c2..c3852180bbb61 100644
--- a/kernel/trace/trace_probe.c
+++ b/kernel/trace/trace_probe.c
@@ -76,9 +76,11 @@ const char PRINT_TYPE_FMT_NAME(string)[] = "\\\"%s\\\"";
 /* Fetch type information table */
 static const struct fetch_type probe_fetch_types[] = {
 	/* Special types */
-	__ASSIGN_FETCH_TYPE("string", string, string, sizeof(u32), 1,
+	__ASSIGN_FETCH_TYPE("string", string, string, sizeof(u32), 1, 1,
 			    "__data_loc char[]"),
-	__ASSIGN_FETCH_TYPE("ustring", string, string, sizeof(u32), 1,
+	__ASSIGN_FETCH_TYPE("ustring", string, string, sizeof(u32), 1, 1,
+			    "__data_loc char[]"),
+	__ASSIGN_FETCH_TYPE("symstr", string, string, sizeof(u32), 1, 1,
 			    "__data_loc char[]"),
 	/* Basic types */
 	ASSIGN_FETCH_TYPE(u8,  u8,  0),
@@ -662,16 +664,26 @@ static int traceprobe_parse_probe_arg_body(const char *argv, ssize_t *size,
 
 	ret = -EINVAL;
 	/* Store operation */
-	if (!strcmp(parg->type->name, "string") ||
-	    !strcmp(parg->type->name, "ustring")) {
-		if (code->op != FETCH_OP_DEREF && code->op != FETCH_OP_UDEREF &&
-		    code->op != FETCH_OP_IMM && code->op != FETCH_OP_COMM &&
-		    code->op != FETCH_OP_DATA && code->op != FETCH_OP_TP_ARG) {
-			trace_probe_log_err(offset + (t ? (t - arg) : 0),
-					    BAD_STRING);
-			goto fail;
+	if (parg->type->is_string) {
+		if (!strcmp(parg->type->name, "symstr")) {
+			if (code->op != FETCH_OP_REG && code->op != FETCH_OP_STACK &&
+			    code->op != FETCH_OP_RETVAL && code->op != FETCH_OP_ARG &&
+			    code->op != FETCH_OP_DEREF && code->op != FETCH_OP_TP_ARG) {
+				trace_probe_log_err(offset + (t ? (t - arg) : 0),
+						    BAD_SYMSTRING);
+				goto fail;
+			}
+		} else {
+			if (code->op != FETCH_OP_DEREF && code->op != FETCH_OP_UDEREF &&
+			    code->op != FETCH_OP_IMM && code->op != FETCH_OP_COMM &&
+			    code->op != FETCH_OP_DATA && code->op != FETCH_OP_TP_ARG) {
+				trace_probe_log_err(offset + (t ? (t - arg) : 0),
+						    BAD_STRING);
+				goto fail;
+			}
 		}
-		if ((code->op == FETCH_OP_IMM || code->op == FETCH_OP_COMM ||
+		if (!strcmp(parg->type->name, "symstr") ||
+		    (code->op == FETCH_OP_IMM || code->op == FETCH_OP_COMM ||
 		     code->op == FETCH_OP_DATA) || code->op == FETCH_OP_TP_ARG ||
 		     parg->count) {
 			/*
@@ -679,6 +691,8 @@ static int traceprobe_parse_probe_arg_body(const char *argv, ssize_t *size,
 			 * must be kept, and if parg->count != 0, this is an
 			 * array of string pointers instead of string address
 			 * itself.
+			 * For the symstr, it doesn't need to dereference, thus
+			 * it just get the value.
 			 */
 			code++;
 			if (code->op != FETCH_OP_NOP) {
@@ -690,6 +704,8 @@ static int traceprobe_parse_probe_arg_body(const char *argv, ssize_t *size,
 		if (!strcmp(parg->type->name, "ustring") ||
 		    code->op == FETCH_OP_UDEREF)
 			code->op = FETCH_OP_ST_USTRING;
+		else if (!strcmp(parg->type->name, "symstr"))
+			code->op = FETCH_OP_ST_SYMSTR;
 		else
 			code->op = FETCH_OP_ST_STRING;
 		code->size = parg->type->size;
@@ -919,8 +935,7 @@ static int __set_print_fmt(struct trace_probe *tp, char *buf, int len,
 	for (i = 0; i < tp->nr_args; i++) {
 		parg = tp->args + i;
 		if (parg->count) {
-			if ((strcmp(parg->type->name, "string") == 0) ||
-			    (strcmp(parg->type->name, "ustring") == 0))
+			if (parg->type->is_string)
 				fmt = ", __get_str(%s[%d])";
 			else
 				fmt = ", REC->%s[%d]";
@@ -928,8 +943,7 @@ static int __set_print_fmt(struct trace_probe *tp, char *buf, int len,
 				pos += snprintf(buf + pos, LEN_OR_ZERO,
 						fmt, parg->name, j);
 		} else {
-			if ((strcmp(parg->type->name, "string") == 0) ||
-			    (strcmp(parg->type->name, "ustring") == 0))
+			if (parg->type->is_string)
 				fmt = ", __get_str(%s)";
 			else
 				fmt = ", REC->%s";
diff --git a/kernel/trace/trace_probe.h b/kernel/trace/trace_probe.h
index 3d731aac94d49..f41c330bd60f1 100644
--- a/kernel/trace/trace_probe.h
+++ b/kernel/trace/trace_probe.h
@@ -98,6 +98,7 @@ enum fetch_op {
 	FETCH_OP_ST_UMEM,	/* Mem: .offset, .size */
 	FETCH_OP_ST_STRING,	/* String: .offset, .size */
 	FETCH_OP_ST_USTRING,	/* User String: .offset, .size */
+	FETCH_OP_ST_SYMSTR,	/* Kernel Symbol String: .offset, .size */
 	// Stage 4 (modify) op
 	FETCH_OP_MOD_BF,	/* Bitfield: .basesize, .lshift, .rshift */
 	// Stage 5 (loop) op
@@ -133,7 +134,8 @@ struct fetch_insn {
 struct fetch_type {
 	const char		*name;		/* Name of type */
 	size_t			size;		/* Byte size of type */
-	int			is_signed;	/* Signed flag */
+	bool			is_signed;	/* Signed flag */
+	bool			is_string;	/* String flag */
 	print_type_func_t	print;		/* Print functions */
 	const char		*fmt;		/* Format string */
 	const char		*fmttype;	/* Name in format file */
@@ -177,16 +179,19 @@ DECLARE_BASIC_PRINT_TYPE_FUNC(symbol);
 #define _ADDR_FETCH_TYPE(t) __ADDR_FETCH_TYPE(t)
 #define ADDR_FETCH_TYPE _ADDR_FETCH_TYPE(BITS_PER_LONG)
 
-#define __ASSIGN_FETCH_TYPE(_name, ptype, ftype, _size, sign, _fmttype)	\
-	{.name = _name,				\
+#define __ASSIGN_FETCH_TYPE(_name, ptype, ftype, _size, sign, str, _fmttype)	\
+	{.name = _name,					\
 	 .size = _size,					\
-	 .is_signed = sign,				\
+	 .is_signed = (bool)sign,			\
+	 .is_string = (bool)str,			\
 	 .print = PRINT_TYPE_FUNC_NAME(ptype),		\
 	 .fmt = PRINT_TYPE_FMT_NAME(ptype),		\
 	 .fmttype = _fmttype,				\
 	}
+
+/* Non string types can use these macros */
 #define _ASSIGN_FETCH_TYPE(_name, ptype, ftype, _size, sign, _fmttype)	\
-	__ASSIGN_FETCH_TYPE(_name, ptype, ftype, _size, sign, #_fmttype)
+	__ASSIGN_FETCH_TYPE(_name, ptype, ftype, _size, sign, 0, #_fmttype)
 #define ASSIGN_FETCH_TYPE(ptype, ftype, sign)			\
 	_ASSIGN_FETCH_TYPE(#ptype, ptype, ftype, sizeof(ftype), sign, ptype)
 
@@ -431,6 +436,7 @@ extern int traceprobe_define_arg_fields(struct trace_event_call *event_call,
 	C(ARRAY_TOO_BIG,	"Array number is too big"),		\
 	C(BAD_TYPE,		"Unknown type is specified"),		\
 	C(BAD_STRING,		"String accepts only memory argument"),	\
+	C(BAD_SYMSTRING,	"Symbol String doesn't accept data/userdata"),	\
 	C(BAD_BITFIELD,		"Invalid bitfield"),			\
 	C(ARG_NAME_TOO_LONG,	"Argument name is too long"),		\
 	C(NO_ARG_NAME,		"Argument name is not specified"),	\
diff --git a/kernel/trace/trace_probe_tmpl.h b/kernel/trace/trace_probe_tmpl.h
index c293a607d5366..21799fa813ca8 100644
--- a/kernel/trace/trace_probe_tmpl.h
+++ b/kernel/trace/trace_probe_tmpl.h
@@ -67,6 +67,37 @@ probe_mem_read(void *dest, void *src, size_t size);
 static nokprobe_inline int
 probe_mem_read_user(void *dest, void *src, size_t size);
 
+static nokprobe_inline int
+fetch_store_symstrlen(unsigned long addr)
+{
+	char namebuf[KSYM_SYMBOL_LEN];
+	int ret;
+
+	ret = sprint_symbol(namebuf, addr);
+	if (ret < 0)
+		return 0;
+
+	return ret + 1;
+}
+
+/*
+ * Fetch a null-terminated symbol string + offset. Caller MUST set *(u32 *)buf
+ * with max length and relative data location.
+ */
+static nokprobe_inline int
+fetch_store_symstring(unsigned long addr, void *dest, void *base)
+{
+	int maxlen = get_loc_len(*(u32 *)dest);
+	void *__dest;
+
+	if (unlikely(!maxlen))
+		return -ENOMEM;
+
+	__dest = get_loc_data(dest, base);
+
+	return sprint_symbol(__dest, addr);
+}
+
 /* From the 2nd stage, routine is same */
 static nokprobe_inline int
 process_fetch_insn_bottom(struct fetch_insn *code, unsigned long val,
@@ -99,16 +130,22 @@ process_fetch_insn_bottom(struct fetch_insn *code, unsigned long val,
 stage3:
 	/* 3rd stage: store value to buffer */
 	if (unlikely(!dest)) {
-		if (code->op == FETCH_OP_ST_STRING) {
+		switch (code->op) {
+		case FETCH_OP_ST_STRING:
 			ret = fetch_store_strlen(val + code->offset);
 			code++;
 			goto array;
-		} else if (code->op == FETCH_OP_ST_USTRING) {
+		case FETCH_OP_ST_USTRING:
 			ret += fetch_store_strlen_user(val + code->offset);
 			code++;
 			goto array;
-		} else
+		case FETCH_OP_ST_SYMSTR:
+			ret += fetch_store_symstrlen(val + code->offset);
+			code++;
+			goto array;
+		default:
 			return -EILSEQ;
+		}
 	}
 
 	switch (code->op) {
@@ -129,6 +166,10 @@ process_fetch_insn_bottom(struct fetch_insn *code, unsigned long val,
 		loc = *(u32 *)dest;
 		ret = fetch_store_string_user(val + code->offset, dest, base);
 		break;
+	case FETCH_OP_ST_SYMSTR:
+		loc = *(u32 *)dest;
+		ret = fetch_store_symstring(val + code->offset, dest, base);
+		break;
 	default:
 		return -EILSEQ;
 	}
-- 
2.39.2

[PATCH 6.1 058/228] tracing/probes: Fix to avoid double count of the string length on the array

[Greg Kroah-Hartman]

From: Masami Hiramatsu (Google) <mhiramat@kernel.org>

[ Upstream commit 66bcf65d6cf0ca6540e2341e88ee7ef02dbdda08 ]

If an array is specified with the ustring or symstr, the length of the
strings are accumlated on both of 'ret' and 'total', which means the
length is double counted.
Just set the length to the 'ret' value for avoiding double counting.

Link: https://lore.kernel.org/all/168908492917.123124.15076463491122036025.stgit@devnote2/

Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/8819b154-2ba1-43c3-98a2-cbde20892023@moroto.mountain/
Fixes: 88903c464321 ("tracing/probe: Add ustring type for user-space string")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/trace_probe_tmpl.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/trace/trace_probe_tmpl.h b/kernel/trace/trace_probe_tmpl.h
index 21799fa813ca8..98ac09052fea4 100644
--- a/kernel/trace/trace_probe_tmpl.h
+++ b/kernel/trace/trace_probe_tmpl.h
@@ -136,11 +136,11 @@ process_fetch_insn_bottom(struct fetch_insn *code, unsigned long val,
 			code++;
 			goto array;
 		case FETCH_OP_ST_USTRING:
-			ret += fetch_store_strlen_user(val + code->offset);
+			ret = fetch_store_strlen_user(val + code->offset);
 			code++;
 			goto array;
 		case FETCH_OP_ST_SYMSTR:
-			ret += fetch_store_symstrlen(val + code->offset);
+			ret = fetch_store_symstrlen(val + code->offset);
 			code++;
 			goto array;
 		default:
-- 
2.39.2

[PATCH 6.1 059/228] tracing: Allow synthetic events to pass around stacktraces

[Greg Kroah-Hartman]

From: Steven Rostedt (Google) <rostedt@goodmis.org>

[ Upstream commit 00cf3d672a9dd409418647e9f98784c339c3ff63 ]

Allow a stacktrace from one event to be displayed by the end event of a
synthetic event. This is very useful when looking for the longest latency
of a sleep or something blocked on I/O.

 # cd /sys/kernel/tracing/
 # echo 's:block_lat pid_t pid; u64 delta; unsigned long[] stack;' > dynamic_events
 # echo 'hist:keys=next_pid:ts=common_timestamp.usecs,st=stacktrace  if prev_state == 1||prev_state == 2' > events/sched/sched_switch/trigger
 # echo 'hist:keys=prev_pid:delta=common_timestamp.usecs-$ts,s=$st:onmax($delta).trace(block_lat,prev_pid,$delta,$s)' >> events/sched/sched_switch/trigger

The above creates a "block_lat" synthetic event that take the stacktrace of
when a task schedules out in either the interruptible or uninterruptible
states, and on a new per process max $delta (the time it was scheduled
out), will print the process id and the stacktrace.

  # echo 1 > events/synthetic/block_lat/enable
  # cat trace
 #           TASK-PID     CPU#  |||||  TIMESTAMP  FUNCTION
 #              | |         |   |||||     |         |
    kworker/u16:0-767     [006] d..4.   560.645045: block_lat: pid=767 delta=66 stack=STACK:
 => __schedule
 => schedule
 => pipe_read
 => vfs_read
 => ksys_read
 => do_syscall_64
 => 0x966000aa

           <idle>-0       [003] d..4.   561.132117: block_lat: pid=0 delta=413787 stack=STACK:
 => __schedule
 => schedule
 => schedule_hrtimeout_range_clock
 => do_sys_poll
 => __x64_sys_poll
 => do_syscall_64
 => 0x966000aa

            <...>-153     [006] d..4.   562.068407: block_lat: pid=153 delta=54 stack=STACK:
 => __schedule
 => schedule
 => io_schedule
 => rq_qos_wait
 => wbt_wait
 => __rq_qos_throttle
 => blk_mq_submit_bio
 => submit_bio_noacct_nocheck
 => ext4_bio_write_page
 => mpage_submit_page
 => mpage_process_page_bufs
 => mpage_prepare_extent_to_map
 => ext4_do_writepages
 => ext4_writepages
 => do_writepages
 => __writeback_single_inode

Link: https://lkml.kernel.org/r/20230117152236.010941267@goodmis.org

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Ching-lin Yu <chinglinyu@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: 797311bce5c2 ("tracing/probes: Fix to record 0-length data_loc in fetch_store_string*() if fails")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/trace.h              |  4 ++
 kernel/trace/trace_events_hist.c  |  7 ++-
 kernel/trace/trace_events_synth.c | 80 ++++++++++++++++++++++++++++++-
 kernel/trace/trace_synth.h        |  1 +
 4 files changed, 87 insertions(+), 5 deletions(-)

diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h
index ac7af03ce8372..e90c7e840320d 100644
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -113,6 +113,10 @@ enum trace_type {
 #define MEM_FAIL(condition, fmt, ...)					\
 	DO_ONCE_LITE_IF(condition, pr_err, "ERROR: " fmt, ##__VA_ARGS__)
 
+#define HIST_STACKTRACE_DEPTH	16
+#define HIST_STACKTRACE_SIZE	(HIST_STACKTRACE_DEPTH * sizeof(unsigned long))
+#define HIST_STACKTRACE_SKIP	5
+
 /*
  * syscalls are special, and need special handling, this is why
  * they are not included in trace_entries.h
diff --git a/kernel/trace/trace_events_hist.c b/kernel/trace/trace_events_hist.c
index 0f5d16eabd3b0..1470af2190735 100644
--- a/kernel/trace/trace_events_hist.c
+++ b/kernel/trace/trace_events_hist.c
@@ -479,10 +479,6 @@ DEFINE_HIST_FIELD_FN(u8);
 #define for_each_hist_key_field(i, hist_data)	\
 	for ((i) = (hist_data)->n_vals; (i) < (hist_data)->n_fields; (i)++)
 
-#define HIST_STACKTRACE_DEPTH	16
-#define HIST_STACKTRACE_SIZE	(HIST_STACKTRACE_DEPTH * sizeof(unsigned long))
-#define HIST_STACKTRACE_SKIP	5
-
 #define HITCOUNT_IDX		0
 #define HIST_KEY_SIZE_MAX	(MAX_FILTER_STR_VAL + HIST_STACKTRACE_SIZE)
 
@@ -3843,6 +3839,9 @@ static int check_synth_field(struct synth_event *event,
 	    && field->is_dynamic)
 		return 0;
 
+	if (strstr(hist_field->type, "long[") && field->is_stack)
+		return 0;
+
 	if (strcmp(field->type, hist_field->type) != 0) {
 		if (field->size != hist_field->size ||
 		    (!field->is_string && field->is_signed != hist_field->is_signed))
diff --git a/kernel/trace/trace_events_synth.c b/kernel/trace/trace_events_synth.c
index 89083ae1aebe3..3c18e7bd40189 100644
--- a/kernel/trace/trace_events_synth.c
+++ b/kernel/trace/trace_events_synth.c
@@ -184,6 +184,14 @@ static int synth_field_is_string(char *type)
 	return false;
 }
 
+static int synth_field_is_stack(char *type)
+{
+	if (strstr(type, "long[") != NULL)
+		return true;
+
+	return false;
+}
+
 static int synth_field_string_size(char *type)
 {
 	char buf[4], *end, *start;
@@ -259,6 +267,8 @@ static int synth_field_size(char *type)
 		size = sizeof(gfp_t);
 	else if (synth_field_is_string(type))
 		size = synth_field_string_size(type);
+	else if (synth_field_is_stack(type))
+		size = 0;
 
 	return size;
 }
@@ -303,6 +313,8 @@ static const char *synth_field_fmt(char *type)
 		fmt = "%x";
 	else if (synth_field_is_string(type))
 		fmt = "%.*s";
+	else if (synth_field_is_stack(type))
+		fmt = "%s";
 
 	return fmt;
 }
@@ -382,6 +394,23 @@ static enum print_line_t print_synth_event(struct trace_iterator *iter,
 						 i == se->n_fields - 1 ? "" : " ");
 				n_u64 += STR_VAR_LEN_MAX / sizeof(u64);
 			}
+		} else if (se->fields[i]->is_stack) {
+			u32 offset, data_offset, len;
+			unsigned long *p, *end;
+
+			offset = (u32)entry->fields[n_u64];
+			data_offset = offset & 0xffff;
+			len = offset >> 16;
+
+			p = (void *)entry + data_offset;
+			end = (void *)p + len - (sizeof(long) - 1);
+
+			trace_seq_printf(s, "%s=STACK:\n", se->fields[i]->name);
+
+			for (; *p && p < end; p++)
+				trace_seq_printf(s, "=> %pS\n", (void *)*p);
+			n_u64++;
+
 		} else {
 			struct trace_print_flags __flags[] = {
 			    __def_gfpflag_names, {-1, NULL} };
@@ -458,6 +487,43 @@ static unsigned int trace_string(struct synth_trace_event *entry,
 	return len;
 }
 
+static unsigned int trace_stack(struct synth_trace_event *entry,
+				 struct synth_event *event,
+				 long *stack,
+				 unsigned int data_size,
+				 unsigned int *n_u64)
+{
+	unsigned int len;
+	u32 data_offset;
+	void *data_loc;
+
+	data_offset = struct_size(entry, fields, event->n_u64);
+	data_offset += data_size;
+
+	for (len = 0; len < HIST_STACKTRACE_DEPTH; len++) {
+		if (!stack[len])
+			break;
+	}
+
+	/* Include the zero'd element if it fits */
+	if (len < HIST_STACKTRACE_DEPTH)
+		len++;
+
+	len *= sizeof(long);
+
+	/* Find the dynamic section to copy the stack into. */
+	data_loc = (void *)entry + data_offset;
+	memcpy(data_loc, stack, len);
+
+	/* Fill in the field that holds the offset/len combo */
+	data_offset |= len << 16;
+	*(u32 *)&entry->fields[*n_u64] = data_offset;
+
+	(*n_u64)++;
+
+	return len;
+}
+
 static notrace void trace_event_raw_event_synth(void *__data,
 						u64 *var_ref_vals,
 						unsigned int *var_ref_idx)
@@ -510,6 +576,12 @@ static notrace void trace_event_raw_event_synth(void *__data,
 					   event->fields[i]->is_dynamic,
 					   data_size, &n_u64);
 			data_size += len; /* only dynamic string increments */
+		} if (event->fields[i]->is_stack) {
+		        long *stack = (long *)(long)var_ref_vals[val_idx];
+
+			len = trace_stack(entry, event, stack,
+					   data_size, &n_u64);
+			data_size += len;
 		} else {
 			struct synth_field *field = event->fields[i];
 			u64 val = var_ref_vals[val_idx];
@@ -572,6 +644,9 @@ static int __set_synth_event_print_fmt(struct synth_event *event,
 		    event->fields[i]->is_dynamic)
 			pos += snprintf(buf + pos, LEN_OR_ZERO,
 				", __get_str(%s)", event->fields[i]->name);
+		else if (event->fields[i]->is_stack)
+			pos += snprintf(buf + pos, LEN_OR_ZERO,
+				", __get_stacktrace(%s)", event->fields[i]->name);
 		else
 			pos += snprintf(buf + pos, LEN_OR_ZERO,
 					", REC->%s", event->fields[i]->name);
@@ -708,7 +783,8 @@ static struct synth_field *parse_synth_field(int argc, char **argv,
 		ret = -EINVAL;
 		goto free;
 	} else if (size == 0) {
-		if (synth_field_is_string(field->type)) {
+		if (synth_field_is_string(field->type) ||
+		    synth_field_is_stack(field->type)) {
 			char *type;
 
 			len = sizeof("__data_loc ") + strlen(field->type) + 1;
@@ -739,6 +815,8 @@ static struct synth_field *parse_synth_field(int argc, char **argv,
 
 	if (synth_field_is_string(field->type))
 		field->is_string = true;
+	else if (synth_field_is_stack(field->type))
+		field->is_stack = true;
 
 	field->is_signed = synth_field_signed(field->type);
  out:
diff --git a/kernel/trace/trace_synth.h b/kernel/trace/trace_synth.h
index b29595fe3ac5a..43f6fb6078dbf 100644
--- a/kernel/trace/trace_synth.h
+++ b/kernel/trace/trace_synth.h
@@ -18,6 +18,7 @@ struct synth_field {
 	bool is_signed;
 	bool is_string;
 	bool is_dynamic;
+	bool is_stack;
 };
 
 struct synth_event {
-- 
2.39.2

[PATCH 6.1 060/228] Revert "tracing: Add "(fault)" name injection to kernel probes"

[Greg Kroah-Hartman]

From: Masami Hiramatsu (Google) <mhiramat@kernel.org>

[ Upstream commit 4ed8f337dee32df71435689c19d22e4ee846e15a ]

This reverts commit 2e9906f84fc7c99388bb7123ade167250d50f1c0.

It was turned out that commit 2e9906f84fc7 ("tracing: Add "(fault)"
name injection to kernel probes") did not work correctly and probe
events still show just '(fault)' (instead of '"(fault)"'). Also,
current '(fault)' is more explicit that it faulted.

This also moves FAULT_STRING macro to trace.h so that synthetic
event can keep using it, and uses it in trace_probe.c too.

Link: https://lore.kernel.org/all/168908495772.123124.1250788051922100079.stgit@devnote2/
Link: https://lore.kernel.org/all/20230706230642.3793a593@rorschach.local.home/

Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: 797311bce5c2 ("tracing/probes: Fix to record 0-length data_loc in fetch_store_string*() if fails")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/trace.h              |  2 ++
 kernel/trace/trace_probe.c        |  2 +-
 kernel/trace/trace_probe_kernel.h | 31 ++++++-------------------------
 3 files changed, 9 insertions(+), 26 deletions(-)

diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h
index e90c7e840320d..3d3505286aa7f 100644
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -113,6 +113,8 @@ enum trace_type {
 #define MEM_FAIL(condition, fmt, ...)					\
 	DO_ONCE_LITE_IF(condition, pr_err, "ERROR: " fmt, ##__VA_ARGS__)
 
+#define FAULT_STRING "(fault)"
+
 #define HIST_STACKTRACE_DEPTH	16
 #define HIST_STACKTRACE_SIZE	(HIST_STACKTRACE_DEPTH * sizeof(unsigned long))
 #define HIST_STACKTRACE_SKIP	5
diff --git a/kernel/trace/trace_probe.c b/kernel/trace/trace_probe.c
index c3852180bbb61..eef9806bb9b14 100644
--- a/kernel/trace/trace_probe.c
+++ b/kernel/trace/trace_probe.c
@@ -64,7 +64,7 @@ int PRINT_TYPE_FUNC_NAME(string)(struct trace_seq *s, void *data, void *ent)
 	int len = *(u32 *)data >> 16;
 
 	if (!len)
-		trace_seq_puts(s, "(fault)");
+		trace_seq_puts(s, FAULT_STRING);
 	else
 		trace_seq_printf(s, "\"%s\"",
 				 (const char *)get_loc_data(data, ent));
diff --git a/kernel/trace/trace_probe_kernel.h b/kernel/trace/trace_probe_kernel.h
index 77dbd9ff97826..1d43df29a1f8e 100644
--- a/kernel/trace/trace_probe_kernel.h
+++ b/kernel/trace/trace_probe_kernel.h
@@ -2,8 +2,6 @@
 #ifndef __TRACE_PROBE_KERNEL_H_
 #define __TRACE_PROBE_KERNEL_H_
 
-#define FAULT_STRING "(fault)"
-
 /*
  * This depends on trace_probe.h, but can not include it due to
  * the way trace_probe_tmpl.h is used by trace_kprobe.c and trace_eprobe.c.
@@ -15,16 +13,8 @@ static nokprobe_inline int
 kern_fetch_store_strlen_user(unsigned long addr)
 {
 	const void __user *uaddr =  (__force const void __user *)addr;
-	int ret;
 
-	ret = strnlen_user_nofault(uaddr, MAX_STRING_SIZE);
-	/*
-	 * strnlen_user_nofault returns zero on fault, insert the
-	 * FAULT_STRING when that occurs.
-	 */
-	if (ret <= 0)
-		return strlen(FAULT_STRING) + 1;
-	return ret;
+	return strnlen_user_nofault(uaddr, MAX_STRING_SIZE);
 }
 
 /* Return the length of string -- including null terminal byte */
@@ -44,18 +34,7 @@ kern_fetch_store_strlen(unsigned long addr)
 		len++;
 	} while (c && ret == 0 && len < MAX_STRING_SIZE);
 
-	/* For faults, return enough to hold the FAULT_STRING */
-	return (ret < 0) ? strlen(FAULT_STRING) + 1 : len;
-}
-
-static nokprobe_inline void set_data_loc(int ret, void *dest, void *__dest, void *base, int len)
-{
-	if (ret >= 0) {
-		*(u32 *)dest = make_data_loc(ret, __dest - base);
-	} else {
-		strscpy(__dest, FAULT_STRING, len);
-		ret = strlen(__dest) + 1;
-	}
+	return (ret < 0) ? ret : len;
 }
 
 /*
@@ -76,7 +55,8 @@ kern_fetch_store_string_user(unsigned long addr, void *dest, void *base)
 	__dest = get_loc_data(dest, base);
 
 	ret = strncpy_from_user_nofault(__dest, uaddr, maxlen);
-	set_data_loc(ret, dest, __dest, base, maxlen);
+	if (ret >= 0)
+		*(u32 *)dest = make_data_loc(ret, __dest - base);
 
 	return ret;
 }
@@ -107,7 +87,8 @@ kern_fetch_store_string(unsigned long addr, void *dest, void *base)
 	 * probing.
 	 */
 	ret = strncpy_from_kernel_nofault(__dest, (void *)addr, maxlen);
-	set_data_loc(ret, dest, __dest, base, maxlen);
+	if (ret >= 0)
+		*(u32 *)dest = make_data_loc(ret, __dest - base);
 
 	return ret;
 }
-- 
2.39.2

[PATCH 6.1 061/228] tracing/probes: Fix to record 0-length data_loc in fetch_store_string*() if fails

[Greg Kroah-Hartman]

From: Masami Hiramatsu (Google) <mhiramat@kernel.org>

[ Upstream commit 797311bce5c2ac90b8d65e357603cfd410d36ebb ]

Fix to record 0-length data to data_loc in fetch_store_string*() if it fails
to get the string data.
Currently those expect that the data_loc is updated by store_trace_args() if
it returns the error code. However, that does not work correctly if the
argument is an array of strings. In that case, store_trace_args() only clears
the first entry of the array (which may have no error) and leaves other
entries. So it should be cleared by fetch_store_string*() itself.
Also, 'dyndata' and 'maxlen' in store_trace_args() should be updated
only if it is used (ret > 0 and argument is a dynamic data.)

Link: https://lore.kernel.org/all/168908496683.123124.4761206188794205601.stgit@devnote2/

Fixes: 40b53b771806 ("tracing: probeevent: Add array type support")
Cc: stable@vger.kernel.org
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/trace_probe_kernel.h | 13 +++++++++----
 kernel/trace/trace_probe_tmpl.h   | 10 +++-------
 kernel/trace/trace_uprobe.c       |  3 ++-
 3 files changed, 14 insertions(+), 12 deletions(-)

diff --git a/kernel/trace/trace_probe_kernel.h b/kernel/trace/trace_probe_kernel.h
index 1d43df29a1f8e..2da70be83831c 100644
--- a/kernel/trace/trace_probe_kernel.h
+++ b/kernel/trace/trace_probe_kernel.h
@@ -37,6 +37,13 @@ kern_fetch_store_strlen(unsigned long addr)
 	return (ret < 0) ? ret : len;
 }
 
+static nokprobe_inline void set_data_loc(int ret, void *dest, void *__dest, void *base)
+{
+	if (ret < 0)
+		ret = 0;
+	*(u32 *)dest = make_data_loc(ret, __dest - base);
+}
+
 /*
  * Fetch a null-terminated string from user. Caller MUST set *(u32 *)buf
  * with max length and relative data location.
@@ -55,8 +62,7 @@ kern_fetch_store_string_user(unsigned long addr, void *dest, void *base)
 	__dest = get_loc_data(dest, base);
 
 	ret = strncpy_from_user_nofault(__dest, uaddr, maxlen);
-	if (ret >= 0)
-		*(u32 *)dest = make_data_loc(ret, __dest - base);
+	set_data_loc(ret, dest, __dest, base);
 
 	return ret;
 }
@@ -87,8 +93,7 @@ kern_fetch_store_string(unsigned long addr, void *dest, void *base)
 	 * probing.
 	 */
 	ret = strncpy_from_kernel_nofault(__dest, (void *)addr, maxlen);
-	if (ret >= 0)
-		*(u32 *)dest = make_data_loc(ret, __dest - base);
+	set_data_loc(ret, dest, __dest, base);
 
 	return ret;
 }
diff --git a/kernel/trace/trace_probe_tmpl.h b/kernel/trace/trace_probe_tmpl.h
index 98ac09052fea4..3e2f5a43b974c 100644
--- a/kernel/trace/trace_probe_tmpl.h
+++ b/kernel/trace/trace_probe_tmpl.h
@@ -247,13 +247,9 @@ store_trace_args(void *data, struct trace_probe *tp, void *rec,
 		if (unlikely(arg->dynamic))
 			*dl = make_data_loc(maxlen, dyndata - base);
 		ret = process_fetch_insn(arg->code, rec, dl, base);
-		if (arg->dynamic) {
-			if (unlikely(ret < 0)) {
-				*dl = make_data_loc(0, dyndata - base);
-			} else {
-				dyndata += ret;
-				maxlen -= ret;
-			}
+		if (arg->dynamic && likely(ret > 0)) {
+			dyndata += ret;
+			maxlen -= ret;
 		}
 	}
 }
diff --git a/kernel/trace/trace_uprobe.c b/kernel/trace/trace_uprobe.c
index fb58e86dd1178..2ac06a642863a 100644
--- a/kernel/trace/trace_uprobe.c
+++ b/kernel/trace/trace_uprobe.c
@@ -170,7 +170,8 @@ fetch_store_string(unsigned long addr, void *dest, void *base)
 			 */
 			ret++;
 		*(u32 *)dest = make_data_loc(ret, (void *)dst - base);
-	}
+	} else
+		*(u32 *)dest = make_data_loc(0, (void *)dst - base);
 
 	return ret;
 }
-- 
2.39.2

[PATCH 6.1 062/228] test_maple_tree: test modifications while iterating

[Greg Kroah-Hartman]

From: Liam R. Howlett <Liam.Howlett@Oracle.com>

[ Upstream commit 5159d64b335401fa83f18c27e2267f1eafc41bd3 ]

Add a testcase to ensure the iterator detects bad states on modifications
and does what the user expects

Link: https://lkml.kernel.org/r/20230120162650.984577-5-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 7a93c71a6714 ("maple_tree: fix 32 bit mas_next testing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/test_maple_tree.c | 72 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 72 insertions(+)

diff --git a/lib/test_maple_tree.c b/lib/test_maple_tree.c
index f7364b9fee939..f1db333270e9f 100644
--- a/lib/test_maple_tree.c
+++ b/lib/test_maple_tree.c
@@ -1709,6 +1709,74 @@ static noinline void check_forking(struct maple_tree *mt)
 	mtree_destroy(&newmt);
 }
 
+static noinline void check_iteration(struct maple_tree *mt)
+{
+	int i, nr_entries = 125;
+	void *val;
+	MA_STATE(mas, mt, 0, 0);
+
+	for (i = 0; i <= nr_entries; i++)
+		mtree_store_range(mt, i * 10, i * 10 + 9,
+				  xa_mk_value(i), GFP_KERNEL);
+
+	mt_set_non_kernel(99999);
+
+	i = 0;
+	mas_lock(&mas);
+	mas_for_each(&mas, val, 925) {
+		MT_BUG_ON(mt, mas.index != i * 10);
+		MT_BUG_ON(mt, mas.last != i * 10 + 9);
+		/* Overwrite end of entry 92 */
+		if (i == 92) {
+			mas.index = 925;
+			mas.last = 929;
+			mas_store(&mas, val);
+		}
+		i++;
+	}
+	/* Ensure mas_find() gets the next value */
+	val = mas_find(&mas, ULONG_MAX);
+	MT_BUG_ON(mt, val != xa_mk_value(i));
+
+	mas_set(&mas, 0);
+	i = 0;
+	mas_for_each(&mas, val, 785) {
+		MT_BUG_ON(mt, mas.index != i * 10);
+		MT_BUG_ON(mt, mas.last != i * 10 + 9);
+		/* Overwrite start of entry 78 */
+		if (i == 78) {
+			mas.index = 780;
+			mas.last = 785;
+			mas_store(&mas, val);
+		} else {
+			i++;
+		}
+	}
+	val = mas_find(&mas, ULONG_MAX);
+	MT_BUG_ON(mt, val != xa_mk_value(i));
+
+	mas_set(&mas, 0);
+	i = 0;
+	mas_for_each(&mas, val, 765) {
+		MT_BUG_ON(mt, mas.index != i * 10);
+		MT_BUG_ON(mt, mas.last != i * 10 + 9);
+		/* Overwrite end of entry 76 and advance to the end */
+		if (i == 76) {
+			mas.index = 760;
+			mas.last = 765;
+			mas_store(&mas, val);
+			mas_next(&mas, ULONG_MAX);
+		}
+		i++;
+	}
+	/* Make sure the next find returns the one after 765, 766-769 */
+	val = mas_find(&mas, ULONG_MAX);
+	MT_BUG_ON(mt, val != xa_mk_value(76));
+	mas_unlock(&mas);
+	mas_destroy(&mas);
+	mt_set_non_kernel(0);
+}
+
 static noinline void check_mas_store_gfp(struct maple_tree *mt)
 {
 
@@ -2702,6 +2770,10 @@ static int maple_tree_seed(void)
 	goto skip;
 #endif
 
+	mt_init_flags(&tree, MT_FLAGS_ALLOC_RANGE);
+	check_iteration(&tree);
+	mtree_destroy(&tree);
+
 	mt_init_flags(&tree, MT_FLAGS_ALLOC_RANGE);
 	check_forking(&tree);
 	mtree_destroy(&tree);
-- 
2.39.2

[PATCH 6.1 063/228] maple_tree: add __init and __exit to test module

[Greg Kroah-Hartman]

From: Liam R. Howlett <Liam.Howlett@oracle.com>

[ Upstream commit eaf9790d3bc6e157a2134c01c7d707a5a712fab1 ]

The test functions are not needed after the module is removed, so mark
them as such.  Add __exit to the module removal function.  Some other
variables have been marked as const static as well.

Link: https://lkml.kernel.org/r/20230518145544.1722059-20-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Binderman <dcb314@hotmail.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vernon Yang <vernon2gm@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 7a93c71a6714 ("maple_tree: fix 32 bit mas_next testing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/test_maple_tree.c                 | 158 +++++++++++++-------------
 tools/testing/radix-tree/linux/init.h |   1 +
 tools/testing/radix-tree/maple.c      | 147 ++++++++++++------------
 3 files changed, 155 insertions(+), 151 deletions(-)

diff --git a/lib/test_maple_tree.c b/lib/test_maple_tree.c
index f1db333270e9f..261bad680f81d 100644
--- a/lib/test_maple_tree.c
+++ b/lib/test_maple_tree.c
@@ -30,54 +30,54 @@
 #else
 #define cond_resched()			do {} while (0)
 #endif
-static
-int mtree_insert_index(struct maple_tree *mt, unsigned long index, gfp_t gfp)
+static int __init mtree_insert_index(struct maple_tree *mt,
+				     unsigned long index, gfp_t gfp)
 {
 	return mtree_insert(mt, index, xa_mk_value(index & LONG_MAX), gfp);
 }
 
-static void mtree_erase_index(struct maple_tree *mt, unsigned long index)
+static void __init mtree_erase_index(struct maple_tree *mt, unsigned long index)
 {
 	MT_BUG_ON(mt, mtree_erase(mt, index) != xa_mk_value(index & LONG_MAX));
 	MT_BUG_ON(mt, mtree_load(mt, index) != NULL);
 }
 
-static int mtree_test_insert(struct maple_tree *mt, unsigned long index,
+static int __init mtree_test_insert(struct maple_tree *mt, unsigned long index,
 				void *ptr)
 {
 	return mtree_insert(mt, index, ptr, GFP_KERNEL);
 }
 
-static int mtree_test_store_range(struct maple_tree *mt, unsigned long start,
-				unsigned long end, void *ptr)
+static int __init mtree_test_store_range(struct maple_tree *mt,
+			unsigned long start, unsigned long end, void *ptr)
 {
 	return mtree_store_range(mt, start, end, ptr, GFP_KERNEL);
 }
 
-static int mtree_test_store(struct maple_tree *mt, unsigned long start,
+static int __init mtree_test_store(struct maple_tree *mt, unsigned long start,
 				void *ptr)
 {
 	return mtree_test_store_range(mt, start, start, ptr);
 }
 
-static int mtree_test_insert_range(struct maple_tree *mt, unsigned long start,
-				unsigned long end, void *ptr)
+static int __init mtree_test_insert_range(struct maple_tree *mt,
+			unsigned long start, unsigned long end, void *ptr)
 {
 	return mtree_insert_range(mt, start, end, ptr, GFP_KERNEL);
 }
 
-static void *mtree_test_load(struct maple_tree *mt, unsigned long index)
+static void __init *mtree_test_load(struct maple_tree *mt, unsigned long index)
 {
 	return mtree_load(mt, index);
 }
 
-static void *mtree_test_erase(struct maple_tree *mt, unsigned long index)
+static void __init *mtree_test_erase(struct maple_tree *mt, unsigned long index)
 {
 	return mtree_erase(mt, index);
 }
 
 #if defined(CONFIG_64BIT)
-static noinline void check_mtree_alloc_range(struct maple_tree *mt,
+static noinline void __init check_mtree_alloc_range(struct maple_tree *mt,
 		unsigned long start, unsigned long end, unsigned long size,
 		unsigned long expected, int eret, void *ptr)
 {
@@ -94,7 +94,7 @@ static noinline void check_mtree_alloc_range(struct maple_tree *mt,
 	MT_BUG_ON(mt, result != expected);
 }
 
-static noinline void check_mtree_alloc_rrange(struct maple_tree *mt,
+static noinline void __init check_mtree_alloc_rrange(struct maple_tree *mt,
 		unsigned long start, unsigned long end, unsigned long size,
 		unsigned long expected, int eret, void *ptr)
 {
@@ -112,8 +112,8 @@ static noinline void check_mtree_alloc_rrange(struct maple_tree *mt,
 }
 #endif
 
-static noinline void check_load(struct maple_tree *mt, unsigned long index,
-				void *ptr)
+static noinline void __init check_load(struct maple_tree *mt,
+				       unsigned long index, void *ptr)
 {
 	void *ret = mtree_test_load(mt, index);
 
@@ -122,7 +122,7 @@ static noinline void check_load(struct maple_tree *mt, unsigned long index,
 	MT_BUG_ON(mt, ret != ptr);
 }
 
-static noinline void check_store_range(struct maple_tree *mt,
+static noinline void __init check_store_range(struct maple_tree *mt,
 		unsigned long start, unsigned long end, void *ptr, int expected)
 {
 	int ret = -EINVAL;
@@ -138,7 +138,7 @@ static noinline void check_store_range(struct maple_tree *mt,
 		check_load(mt, i, ptr);
 }
 
-static noinline void check_insert_range(struct maple_tree *mt,
+static noinline void __init check_insert_range(struct maple_tree *mt,
 		unsigned long start, unsigned long end, void *ptr, int expected)
 {
 	int ret = -EINVAL;
@@ -154,8 +154,8 @@ static noinline void check_insert_range(struct maple_tree *mt,
 		check_load(mt, i, ptr);
 }
 
-static noinline void check_insert(struct maple_tree *mt, unsigned long index,
-		void *ptr)
+static noinline void __init check_insert(struct maple_tree *mt,
+					 unsigned long index, void *ptr)
 {
 	int ret = -EINVAL;
 
@@ -163,7 +163,7 @@ static noinline void check_insert(struct maple_tree *mt, unsigned long index,
 	MT_BUG_ON(mt, ret != 0);
 }
 
-static noinline void check_dup_insert(struct maple_tree *mt,
+static noinline void __init check_dup_insert(struct maple_tree *mt,
 				      unsigned long index, void *ptr)
 {
 	int ret = -EINVAL;
@@ -173,13 +173,13 @@ static noinline void check_dup_insert(struct maple_tree *mt,
 }
 
 
-static noinline
-void check_index_load(struct maple_tree *mt, unsigned long index)
+static noinline void __init check_index_load(struct maple_tree *mt,
+					     unsigned long index)
 {
 	return check_load(mt, index, xa_mk_value(index & LONG_MAX));
 }
 
-static inline int not_empty(struct maple_node *node)
+static inline __init int not_empty(struct maple_node *node)
 {
 	int i;
 
@@ -194,8 +194,8 @@ static inline int not_empty(struct maple_node *node)
 }
 
 
-static noinline void check_rev_seq(struct maple_tree *mt, unsigned long max,
-		bool verbose)
+static noinline void __init check_rev_seq(struct maple_tree *mt,
+					  unsigned long max, bool verbose)
 {
 	unsigned long i = max, j;
 
@@ -227,7 +227,7 @@ static noinline void check_rev_seq(struct maple_tree *mt, unsigned long max,
 #endif
 }
 
-static noinline void check_seq(struct maple_tree *mt, unsigned long max,
+static noinline void __init check_seq(struct maple_tree *mt, unsigned long max,
 		bool verbose)
 {
 	unsigned long i, j;
@@ -256,7 +256,7 @@ static noinline void check_seq(struct maple_tree *mt, unsigned long max,
 #endif
 }
 
-static noinline void check_lb_not_empty(struct maple_tree *mt)
+static noinline void __init check_lb_not_empty(struct maple_tree *mt)
 {
 	unsigned long i, j;
 	unsigned long huge = 4000UL * 1000 * 1000;
@@ -275,13 +275,13 @@ static noinline void check_lb_not_empty(struct maple_tree *mt)
 	mtree_destroy(mt);
 }
 
-static noinline void check_lower_bound_split(struct maple_tree *mt)
+static noinline void __init check_lower_bound_split(struct maple_tree *mt)
 {
 	MT_BUG_ON(mt, !mtree_empty(mt));
 	check_lb_not_empty(mt);
 }
 
-static noinline void check_upper_bound_split(struct maple_tree *mt)
+static noinline void __init check_upper_bound_split(struct maple_tree *mt)
 {
 	unsigned long i, j;
 	unsigned long huge;
@@ -306,7 +306,7 @@ static noinline void check_upper_bound_split(struct maple_tree *mt)
 	mtree_destroy(mt);
 }
 
-static noinline void check_mid_split(struct maple_tree *mt)
+static noinline void __init check_mid_split(struct maple_tree *mt)
 {
 	unsigned long huge = 8000UL * 1000 * 1000;
 
@@ -315,7 +315,7 @@ static noinline void check_mid_split(struct maple_tree *mt)
 	check_lb_not_empty(mt);
 }
 
-static noinline void check_rev_find(struct maple_tree *mt)
+static noinline void __init check_rev_find(struct maple_tree *mt)
 {
 	int i, nr_entries = 200;
 	void *val;
@@ -354,7 +354,7 @@ static noinline void check_rev_find(struct maple_tree *mt)
 	rcu_read_unlock();
 }
 
-static noinline void check_find(struct maple_tree *mt)
+static noinline void __init check_find(struct maple_tree *mt)
 {
 	unsigned long val = 0;
 	unsigned long count;
@@ -571,7 +571,7 @@ static noinline void check_find(struct maple_tree *mt)
 	mtree_destroy(mt);
 }
 
-static noinline void check_find_2(struct maple_tree *mt)
+static noinline void __init check_find_2(struct maple_tree *mt)
 {
 	unsigned long i, j;
 	void *entry;
@@ -616,7 +616,7 @@ static noinline void check_find_2(struct maple_tree *mt)
 
 
 #if defined(CONFIG_64BIT)
-static noinline void check_alloc_rev_range(struct maple_tree *mt)
+static noinline void __init check_alloc_rev_range(struct maple_tree *mt)
 {
 	/*
 	 * Generated by:
@@ -624,7 +624,7 @@ static noinline void check_alloc_rev_range(struct maple_tree *mt)
 	 * awk -F "-" '{printf "0x%s, 0x%s, ", $1, $2}'
 	 */
 
-	unsigned long range[] = {
+	static const unsigned long range[] = {
 	/*      Inclusive     , Exclusive. */
 		0x565234af2000, 0x565234af4000,
 		0x565234af4000, 0x565234af9000,
@@ -652,7 +652,7 @@ static noinline void check_alloc_rev_range(struct maple_tree *mt)
 		0x7fff58791000, 0x7fff58793000,
 	};
 
-	unsigned long holes[] = {
+	static const unsigned long holes[] = {
 		/*
 		 * Note: start of hole is INCLUSIVE
 		 *        end of hole is EXCLUSIVE
@@ -672,7 +672,7 @@ static noinline void check_alloc_rev_range(struct maple_tree *mt)
 	 * 4. number that should be returned.
 	 * 5. return value
 	 */
-	unsigned long req_range[] = {
+	static const unsigned long req_range[] = {
 		0x565234af9000, /* Min */
 		0x7fff58791000, /* Max */
 		0x1000,         /* Size */
@@ -783,7 +783,7 @@ static noinline void check_alloc_rev_range(struct maple_tree *mt)
 	mtree_destroy(mt);
 }
 
-static noinline void check_alloc_range(struct maple_tree *mt)
+static noinline void __init check_alloc_range(struct maple_tree *mt)
 {
 	/*
 	 * Generated by:
@@ -791,7 +791,7 @@ static noinline void check_alloc_range(struct maple_tree *mt)
 	 * awk -F "-" '{printf "0x%s, 0x%s, ", $1, $2}'
 	 */
 
-	unsigned long range[] = {
+	static const unsigned long range[] = {
 	/*      Inclusive     , Exclusive. */
 		0x565234af2000, 0x565234af4000,
 		0x565234af4000, 0x565234af9000,
@@ -818,7 +818,7 @@ static noinline void check_alloc_range(struct maple_tree *mt)
 		0x7fff5878e000, 0x7fff58791000,
 		0x7fff58791000, 0x7fff58793000,
 	};
-	unsigned long holes[] = {
+	static const unsigned long holes[] = {
 		/* Start of hole, end of hole,  size of hole (+1) */
 		0x565234afb000, 0x565234afc000, 0x1000,
 		0x565234afe000, 0x565235def000, 0x12F1000,
@@ -833,7 +833,7 @@ static noinline void check_alloc_range(struct maple_tree *mt)
 	 * 4. number that should be returned.
 	 * 5. return value
 	 */
-	unsigned long req_range[] = {
+	static const unsigned long req_range[] = {
 		0x565234af9000, /* Min */
 		0x7fff58791000, /* Max */
 		0x1000,         /* Size */
@@ -942,10 +942,10 @@ static noinline void check_alloc_range(struct maple_tree *mt)
 }
 #endif
 
-static noinline void check_ranges(struct maple_tree *mt)
+static noinline void __init check_ranges(struct maple_tree *mt)
 {
 	int i, val, val2;
-	unsigned long r[] = {
+	static const unsigned long r[] = {
 		10, 15,
 		20, 25,
 		17, 22, /* Overlaps previous range. */
@@ -1210,7 +1210,7 @@ static noinline void check_ranges(struct maple_tree *mt)
 		MT_BUG_ON(mt, mt_height(mt) != 4);
 }
 
-static noinline void check_next_entry(struct maple_tree *mt)
+static noinline void __init check_next_entry(struct maple_tree *mt)
 {
 	void *entry = NULL;
 	unsigned long limit = 30, i = 0;
@@ -1234,7 +1234,7 @@ static noinline void check_next_entry(struct maple_tree *mt)
 	mtree_destroy(mt);
 }
 
-static noinline void check_prev_entry(struct maple_tree *mt)
+static noinline void __init check_prev_entry(struct maple_tree *mt)
 {
 	unsigned long index = 16;
 	void *value;
@@ -1278,7 +1278,7 @@ static noinline void check_prev_entry(struct maple_tree *mt)
 	mas_unlock(&mas);
 }
 
-static noinline void check_root_expand(struct maple_tree *mt)
+static noinline void __init check_root_expand(struct maple_tree *mt)
 {
 	MA_STATE(mas, mt, 0, 0);
 	void *ptr;
@@ -1367,13 +1367,13 @@ static noinline void check_root_expand(struct maple_tree *mt)
 	mas_unlock(&mas);
 }
 
-static noinline void check_gap_combining(struct maple_tree *mt)
+static noinline void __init check_gap_combining(struct maple_tree *mt)
 {
 	struct maple_enode *mn1, *mn2;
 	void *entry;
 	unsigned long singletons = 100;
-	unsigned long *seq100;
-	unsigned long seq100_64[] = {
+	static const unsigned long *seq100;
+	static const unsigned long seq100_64[] = {
 		/* 0-5 */
 		74, 75, 76,
 		50, 100, 2,
@@ -1387,7 +1387,7 @@ static noinline void check_gap_combining(struct maple_tree *mt)
 		76, 2, 79, 85, 4,
 	};
 
-	unsigned long seq100_32[] = {
+	static const unsigned long seq100_32[] = {
 		/* 0-5 */
 		61, 62, 63,
 		50, 100, 2,
@@ -1401,11 +1401,11 @@ static noinline void check_gap_combining(struct maple_tree *mt)
 		76, 2, 79, 85, 4,
 	};
 
-	unsigned long seq2000[] = {
+	static const unsigned long seq2000[] = {
 		1152, 1151,
 		1100, 1200, 2,
 	};
-	unsigned long seq400[] = {
+	static const unsigned long seq400[] = {
 		286, 318,
 		256, 260, 266, 270, 275, 280, 290, 398,
 		286, 310,
@@ -1564,7 +1564,7 @@ static noinline void check_gap_combining(struct maple_tree *mt)
 	mt_set_non_kernel(0);
 	mtree_destroy(mt);
 }
-static noinline void check_node_overwrite(struct maple_tree *mt)
+static noinline void __init check_node_overwrite(struct maple_tree *mt)
 {
 	int i, max = 4000;
 
@@ -1577,7 +1577,7 @@ static noinline void check_node_overwrite(struct maple_tree *mt)
 }
 
 #if defined(BENCH_SLOT_STORE)
-static noinline void bench_slot_store(struct maple_tree *mt)
+static noinline void __init bench_slot_store(struct maple_tree *mt)
 {
 	int i, brk = 105, max = 1040, brk_start = 100, count = 20000000;
 
@@ -1593,7 +1593,7 @@ static noinline void bench_slot_store(struct maple_tree *mt)
 #endif
 
 #if defined(BENCH_NODE_STORE)
-static noinline void bench_node_store(struct maple_tree *mt)
+static noinline void __init bench_node_store(struct maple_tree *mt)
 {
 	int i, overwrite = 76, max = 240, count = 20000000;
 
@@ -1612,7 +1612,7 @@ static noinline void bench_node_store(struct maple_tree *mt)
 #endif
 
 #if defined(BENCH_AWALK)
-static noinline void bench_awalk(struct maple_tree *mt)
+static noinline void __init bench_awalk(struct maple_tree *mt)
 {
 	int i, max = 2500, count = 50000000;
 	MA_STATE(mas, mt, 1470, 1470);
@@ -1629,7 +1629,7 @@ static noinline void bench_awalk(struct maple_tree *mt)
 }
 #endif
 #if defined(BENCH_WALK)
-static noinline void bench_walk(struct maple_tree *mt)
+static noinline void __init bench_walk(struct maple_tree *mt)
 {
 	int i, max = 2500, count = 550000000;
 	MA_STATE(mas, mt, 1470, 1470);
@@ -1646,7 +1646,7 @@ static noinline void bench_walk(struct maple_tree *mt)
 #endif
 
 #if defined(BENCH_MT_FOR_EACH)
-static noinline void bench_mt_for_each(struct maple_tree *mt)
+static noinline void __init bench_mt_for_each(struct maple_tree *mt)
 {
 	int i, count = 1000000;
 	unsigned long max = 2500, index = 0;
@@ -1670,7 +1670,7 @@ static noinline void bench_mt_for_each(struct maple_tree *mt)
 #endif
 
 /* check_forking - simulate the kernel forking sequence with the tree. */
-static noinline void check_forking(struct maple_tree *mt)
+static noinline void __init check_forking(struct maple_tree *mt)
 {
 
 	struct maple_tree newmt;
@@ -1709,7 +1709,7 @@ static noinline void check_forking(struct maple_tree *mt)
 	mtree_destroy(&newmt);
 }
 
-static noinline void check_iteration(struct maple_tree *mt)
+static noinline void __init check_iteration(struct maple_tree *mt)
 {
 	int i, nr_entries = 125;
 	void *val;
@@ -1777,7 +1777,7 @@ static noinline void check_iteration(struct maple_tree *mt)
 	mt_set_non_kernel(0);
 }
 
-static noinline void check_mas_store_gfp(struct maple_tree *mt)
+static noinline void __init check_mas_store_gfp(struct maple_tree *mt)
 {
 
 	struct maple_tree newmt;
@@ -1810,7 +1810,7 @@ static noinline void check_mas_store_gfp(struct maple_tree *mt)
 }
 
 #if defined(BENCH_FORK)
-static noinline void bench_forking(struct maple_tree *mt)
+static noinline void __init bench_forking(struct maple_tree *mt)
 {
 
 	struct maple_tree newmt;
@@ -1852,15 +1852,17 @@ static noinline void bench_forking(struct maple_tree *mt)
 }
 #endif
 
-static noinline void next_prev_test(struct maple_tree *mt)
+static noinline void __init next_prev_test(struct maple_tree *mt)
 {
 	int i, nr_entries;
 	void *val;
 	MA_STATE(mas, mt, 0, 0);
 	struct maple_enode *mn;
-	unsigned long *level2;
-	unsigned long level2_64[] = {707, 1000, 710, 715, 720, 725};
-	unsigned long level2_32[] = {1747, 2000, 1750, 1755, 1760, 1765};
+	static const unsigned long *level2;
+	static const unsigned long level2_64[] = { 707, 1000, 710, 715, 720,
+						   725};
+	static const unsigned long level2_32[] = { 1747, 2000, 1750, 1755,
+						   1760, 1765};
 
 	if (MAPLE_32BIT) {
 		nr_entries = 500;
@@ -2028,7 +2030,7 @@ static noinline void next_prev_test(struct maple_tree *mt)
 
 
 /* Test spanning writes that require balancing right sibling or right cousin */
-static noinline void check_spanning_relatives(struct maple_tree *mt)
+static noinline void __init check_spanning_relatives(struct maple_tree *mt)
 {
 
 	unsigned long i, nr_entries = 1000;
@@ -2041,7 +2043,7 @@ static noinline void check_spanning_relatives(struct maple_tree *mt)
 	mtree_store_range(mt, 9365, 9955, NULL, GFP_KERNEL);
 }
 
-static noinline void check_fuzzer(struct maple_tree *mt)
+static noinline void __init check_fuzzer(struct maple_tree *mt)
 {
 	/*
 	 * 1. Causes a spanning rebalance of a single root node.
@@ -2438,7 +2440,7 @@ static noinline void check_fuzzer(struct maple_tree *mt)
 }
 
 /* duplicate the tree with a specific gap */
-static noinline void check_dup_gaps(struct maple_tree *mt,
+static noinline void __init check_dup_gaps(struct maple_tree *mt,
 				    unsigned long nr_entries, bool zero_start,
 				    unsigned long gap)
 {
@@ -2478,7 +2480,7 @@ static noinline void check_dup_gaps(struct maple_tree *mt,
 }
 
 /* Duplicate many sizes of trees.  Mainly to test expected entry values */
-static noinline void check_dup(struct maple_tree *mt)
+static noinline void __init check_dup(struct maple_tree *mt)
 {
 	int i;
 	int big_start = 100010;
@@ -2566,7 +2568,7 @@ static noinline void check_dup(struct maple_tree *mt)
 	}
 }
 
-static noinline void check_bnode_min_spanning(struct maple_tree *mt)
+static noinline void __init check_bnode_min_spanning(struct maple_tree *mt)
 {
 	int i = 50;
 	MA_STATE(mas, mt, 0, 0);
@@ -2585,7 +2587,7 @@ static noinline void check_bnode_min_spanning(struct maple_tree *mt)
 	mt_set_non_kernel(0);
 }
 
-static noinline void check_empty_area_window(struct maple_tree *mt)
+static noinline void __init check_empty_area_window(struct maple_tree *mt)
 {
 	unsigned long i, nr_entries = 20;
 	MA_STATE(mas, mt, 0, 0);
@@ -2670,7 +2672,7 @@ static noinline void check_empty_area_window(struct maple_tree *mt)
 	rcu_read_unlock();
 }
 
-static noinline void check_empty_area_fill(struct maple_tree *mt)
+static noinline void __init check_empty_area_fill(struct maple_tree *mt)
 {
 	const unsigned long max = 0x25D78000;
 	unsigned long size;
@@ -2714,11 +2716,11 @@ static noinline void check_empty_area_fill(struct maple_tree *mt)
 }
 
 static DEFINE_MTREE(tree);
-static int maple_tree_seed(void)
+static int __init maple_tree_seed(void)
 {
-	unsigned long set[] = {5015, 5014, 5017, 25, 1000,
-			       1001, 1002, 1003, 1005, 0,
-			       5003, 5002};
+	unsigned long set[] = { 5015, 5014, 5017, 25, 1000,
+				1001, 1002, 1003, 1005, 0,
+				5003, 5002};
 	void *ptr = &set;
 
 	pr_info("\nTEST STARTING\n\n");
@@ -2988,7 +2990,7 @@ static int maple_tree_seed(void)
 	return -EINVAL;
 }
 
-static void maple_tree_harvest(void)
+static void __exit maple_tree_harvest(void)
 {
 
 }
diff --git a/tools/testing/radix-tree/linux/init.h b/tools/testing/radix-tree/linux/init.h
index 1bb0afc213099..81563c3dfce79 100644
--- a/tools/testing/radix-tree/linux/init.h
+++ b/tools/testing/radix-tree/linux/init.h
@@ -1 +1,2 @@
 #define __init
+#define __exit
diff --git a/tools/testing/radix-tree/maple.c b/tools/testing/radix-tree/maple.c
index d1ab5f23f4e4c..cd96a3ee7bb89 100644
--- a/tools/testing/radix-tree/maple.c
+++ b/tools/testing/radix-tree/maple.c
@@ -13,6 +13,7 @@
 #include "test.h"
 #include <stdlib.h>
 #include <time.h>
+#include "linux/init.h"
 
 #define module_init(x)
 #define module_exit(x)
@@ -58,7 +59,7 @@ struct rcu_reader_struct {
  * check_new_node() - Check the creation of new nodes and error path
  * verification.
  */
-static noinline void check_new_node(struct maple_tree *mt)
+static noinline void __init check_new_node(struct maple_tree *mt)
 {
 
 	struct maple_node *mn, *mn2, *mn3;
@@ -430,7 +431,7 @@ static noinline void check_new_node(struct maple_tree *mt)
 /*
  * Check erasing including RCU.
  */
-static noinline void check_erase(struct maple_tree *mt, unsigned long index,
+static noinline void __init check_erase(struct maple_tree *mt, unsigned long index,
 		void *ptr)
 {
 	MT_BUG_ON(mt, mtree_test_erase(mt, index) != ptr);
@@ -440,24 +441,24 @@ static noinline void check_erase(struct maple_tree *mt, unsigned long index,
 #define erase_check_insert(mt, i) check_insert(mt, set[i], entry[i%2])
 #define erase_check_erase(mt, i) check_erase(mt, set[i], entry[i%2])
 
-static noinline void check_erase_testset(struct maple_tree *mt)
+static noinline void __init check_erase_testset(struct maple_tree *mt)
 {
-	unsigned long set[] = { 5015, 5014, 5017, 25, 1000,
-				1001, 1002, 1003, 1005, 0,
-				6003, 6002, 6008, 6012, 6015,
-				7003, 7002, 7008, 7012, 7015,
-				8003, 8002, 8008, 8012, 8015,
-				9003, 9002, 9008, 9012, 9015,
-				10003, 10002, 10008, 10012, 10015,
-				11003, 11002, 11008, 11012, 11015,
-				12003, 12002, 12008, 12012, 12015,
-				13003, 13002, 13008, 13012, 13015,
-				14003, 14002, 14008, 14012, 14015,
-				15003, 15002, 15008, 15012, 15015,
-			      };
-
-
-	void *ptr = &set;
+	static const unsigned long set[] = { 5015, 5014, 5017, 25, 1000,
+					     1001, 1002, 1003, 1005, 0,
+					     6003, 6002, 6008, 6012, 6015,
+					     7003, 7002, 7008, 7012, 7015,
+					     8003, 8002, 8008, 8012, 8015,
+					     9003, 9002, 9008, 9012, 9015,
+					     10003, 10002, 10008, 10012, 10015,
+					     11003, 11002, 11008, 11012, 11015,
+					     12003, 12002, 12008, 12012, 12015,
+					     13003, 13002, 13008, 13012, 13015,
+					     14003, 14002, 14008, 14012, 14015,
+					     15003, 15002, 15008, 15012, 15015,
+					   };
+
+
+	void *ptr = &check_erase_testset;
 	void *entry[2] = { ptr, mt };
 	void *root_node;
 
@@ -714,7 +715,7 @@ static noinline void check_erase_testset(struct maple_tree *mt)
 int mas_ce2_over_count(struct ma_state *mas_start, struct ma_state *mas_end,
 		      void *s_entry, unsigned long s_min,
 		      void *e_entry, unsigned long e_max,
-		      unsigned long *set, int i, bool null_entry)
+		      const unsigned long *set, int i, bool null_entry)
 {
 	int count = 0, span = 0;
 	unsigned long retry = 0;
@@ -944,8 +945,8 @@ static inline void *mas_range_load(struct ma_state *mas,
 }
 
 #if defined(CONFIG_64BIT)
-static noinline void check_erase2_testset(struct maple_tree *mt,
-		unsigned long *set, unsigned long size)
+static noinline void __init check_erase2_testset(struct maple_tree *mt,
+		const unsigned long *set, unsigned long size)
 {
 	int entry_count = 0;
 	int check = 0;
@@ -1089,11 +1090,11 @@ static noinline void check_erase2_testset(struct maple_tree *mt,
 
 
 /* These tests were pulled from KVM tree modifications which failed. */
-static noinline void check_erase2_sets(struct maple_tree *mt)
+static noinline void __init check_erase2_sets(struct maple_tree *mt)
 {
 	void *entry;
 	unsigned long start = 0;
-	unsigned long set[] = {
+	static const unsigned long set[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140721266458624, 140737488351231,
 ERASE, 140721266458624, 140737488351231,
@@ -1111,7 +1112,7 @@ ERASE, 140253902692352, 140253902864383,
 STORE, 140253902692352, 140253902696447,
 STORE, 140253902696448, 140253902864383,
 		};
-	unsigned long set2[] = {
+	static const unsigned long set2[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140735933583360, 140737488351231,
 ERASE, 140735933583360, 140737488351231,
@@ -1135,7 +1136,7 @@ STORE, 140277094813696, 140277094821887,
 STORE, 140277094821888, 140277094825983,
 STORE, 140735933906944, 140735933911039,
 	};
-	unsigned long set3[] = {
+	static const unsigned long set3[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140735790264320, 140737488351231,
 ERASE, 140735790264320, 140737488351231,
@@ -1178,7 +1179,7 @@ STORE, 47135835840512, 47135835885567,
 STORE, 47135835885568, 47135835893759,
 	};
 
-	unsigned long set4[] = {
+	static const unsigned long set4[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140728251703296, 140737488351231,
 ERASE, 140728251703296, 140737488351231,
@@ -1199,7 +1200,7 @@ ERASE, 47646523277312, 47646523445247,
 STORE, 47646523277312, 47646523400191,
 	};
 
-	unsigned long set5[] = {
+	static const unsigned long set5[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140726874062848, 140737488351231,
 ERASE, 140726874062848, 140737488351231,
@@ -1332,7 +1333,7 @@ STORE, 47884791619584, 47884791623679,
 STORE, 47884791623680, 47884791627775,
 	};
 
-	unsigned long set6[] = {
+	static const unsigned long set6[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140722999021568, 140737488351231,
 ERASE, 140722999021568, 140737488351231,
@@ -1464,7 +1465,7 @@ ERASE, 47430432014336, 47430432022527,
 STORE, 47430432014336, 47430432018431,
 STORE, 47430432018432, 47430432022527,
 	};
-	unsigned long set7[] = {
+	static const unsigned long set7[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140729808330752, 140737488351231,
 ERASE, 140729808330752, 140737488351231,
@@ -1596,7 +1597,7 @@ ERASE, 47439987130368, 47439987138559,
 STORE, 47439987130368, 47439987134463,
 STORE, 47439987134464, 47439987138559,
 	};
-	unsigned long set8[] = {
+	static const unsigned long set8[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140722482974720, 140737488351231,
 ERASE, 140722482974720, 140737488351231,
@@ -1729,7 +1730,7 @@ STORE, 47708488638464, 47708488642559,
 STORE, 47708488642560, 47708488646655,
 	};
 
-	unsigned long set9[] = {
+	static const unsigned long set9[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140736427839488, 140737488351231,
 ERASE, 140736427839488, 140736427839488,
@@ -5595,7 +5596,7 @@ ERASE, 47906195480576, 47906195480576,
 STORE, 94641242615808, 94641242750975,
 	};
 
-	unsigned long set10[] = {
+	static const unsigned long set10[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140736427839488, 140737488351231,
 ERASE, 140736427839488, 140736427839488,
@@ -9459,7 +9460,7 @@ STORE, 139726599680000, 139726599684095,
 ERASE, 47906195480576, 47906195480576,
 STORE, 94641242615808, 94641242750975,
 	};
-	unsigned long set11[] = {
+	static const unsigned long set11[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140732658499584, 140737488351231,
 ERASE, 140732658499584, 140732658499584,
@@ -9485,7 +9486,7 @@ STORE, 140732658565120, 140732658569215,
 STORE, 140732658552832, 140732658565119,
 	};
 
-	unsigned long set12[] = { /* contains 12 values. */
+	static const unsigned long set12[] = { /* contains 12 values. */
 STORE, 140737488347136, 140737488351231,
 STORE, 140732658499584, 140737488351231,
 ERASE, 140732658499584, 140732658499584,
@@ -9512,7 +9513,7 @@ STORE, 140732658552832, 140732658565119,
 STORE, 140014592741375, 140014592741375, /* contrived */
 STORE, 140014592733184, 140014592741376, /* creates first entry retry. */
 	};
-	unsigned long set13[] = {
+	static const unsigned long set13[] = {
 STORE, 140373516247040, 140373516251135,/*: ffffa2e7b0e10d80 */
 STORE, 140373516251136, 140373516255231,/*: ffffa2e7b1195d80 */
 STORE, 140373516255232, 140373516443647,/*: ffffa2e7b0e109c0 */
@@ -9525,7 +9526,7 @@ STORE, 140373518684160, 140373518688254,/*: ffffa2e7b05fec00 */
 STORE, 140373518688256, 140373518692351,/*: ffffa2e7bfbdcd80 */
 STORE, 140373518692352, 140373518696447,/*: ffffa2e7b0749e40 */
 	};
-	unsigned long set14[] = {
+	static const unsigned long set14[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140731667996672, 140737488351231,
 SNULL, 140731668000767, 140737488351231,
@@ -9809,7 +9810,7 @@ SNULL, 139826136543232, 139826136809471,
 STORE, 139826136809472, 139826136842239,
 STORE, 139826136543232, 139826136809471,
 	};
-	unsigned long set15[] = {
+	static const unsigned long set15[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140722061451264, 140737488351231,
 SNULL, 140722061455359, 140737488351231,
@@ -10094,7 +10095,7 @@ STORE, 139906808958976, 139906808991743,
 STORE, 139906808692736, 139906808958975,
 	};
 
-	unsigned long set16[] = {
+	static const unsigned long set16[] = {
 STORE, 94174808662016, 94174809321471,
 STORE, 94174811414528, 94174811426815,
 STORE, 94174811426816, 94174811430911,
@@ -10305,7 +10306,7 @@ STORE, 139921865613312, 139921865617407,
 STORE, 139921865547776, 139921865564159,
 	};
 
-	unsigned long set17[] = {
+	static const unsigned long set17[] = {
 STORE, 94397057224704, 94397057646591,
 STORE, 94397057650688, 94397057691647,
 STORE, 94397057691648, 94397057695743,
@@ -10367,7 +10368,7 @@ STORE, 140720477511680, 140720477646847,
 STORE, 140720478302208, 140720478314495,
 STORE, 140720478314496, 140720478318591,
 	};
-	unsigned long set18[] = {
+	static const unsigned long set18[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140724953673728, 140737488351231,
 SNULL, 140724953677823, 140737488351231,
@@ -10400,7 +10401,7 @@ STORE, 140222970597376, 140222970605567,
 ERASE, 140222970597376, 140222970605567,
 STORE, 140222970597376, 140222970605567,
 	};
-	unsigned long set19[] = {
+	static const unsigned long set19[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140725182459904, 140737488351231,
 SNULL, 140725182463999, 140737488351231,
@@ -10669,7 +10670,7 @@ STORE, 140656836775936, 140656836780031,
 STORE, 140656787476480, 140656791920639,
 ERASE, 140656774639616, 140656779083775,
 	};
-	unsigned long set20[] = {
+	static const unsigned long set20[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140735952392192, 140737488351231,
 SNULL, 140735952396287, 140737488351231,
@@ -10825,7 +10826,7 @@ STORE, 140590386819072, 140590386823167,
 STORE, 140590386823168, 140590386827263,
 SNULL, 140590376591359, 140590376595455,
 	};
-	unsigned long set21[] = {
+	static const unsigned long set21[] = {
 STORE, 93874710941696, 93874711363583,
 STORE, 93874711367680, 93874711408639,
 STORE, 93874711408640, 93874711412735,
@@ -10895,7 +10896,7 @@ ERASE, 140708393312256, 140708393316351,
 ERASE, 140708393308160, 140708393312255,
 ERASE, 140708393291776, 140708393308159,
 	};
-	unsigned long set22[] = {
+	static const unsigned long set22[] = {
 STORE, 93951397134336, 93951397183487,
 STORE, 93951397183488, 93951397728255,
 STORE, 93951397728256, 93951397826559,
@@ -11022,7 +11023,7 @@ STORE, 140551361253376, 140551361519615,
 ERASE, 140551361253376, 140551361519615,
 	};
 
-	unsigned long set23[] = {
+	static const unsigned long set23[] = {
 STORE, 94014447943680, 94014448156671,
 STORE, 94014450253824, 94014450257919,
 STORE, 94014450257920, 94014450266111,
@@ -14346,7 +14347,7 @@ SNULL, 140175956627455, 140175985139711,
 STORE, 140175927242752, 140175956627455,
 STORE, 140175956627456, 140175985139711,
 	};
-	unsigned long set24[] = {
+	static const unsigned long set24[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140735281639424, 140737488351231,
 SNULL, 140735281643519, 140737488351231,
@@ -15508,7 +15509,7 @@ ERASE, 139635393024000, 139635401412607,
 ERASE, 139635384627200, 139635384631295,
 ERASE, 139635384631296, 139635393019903,
 	};
-	unsigned long set25[] = {
+	static const unsigned long set25[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140737488343040, 140737488351231,
 STORE, 140722547441664, 140737488351231,
@@ -22296,7 +22297,7 @@ STORE, 140249652703232, 140249682087935,
 STORE, 140249682087936, 140249710600191,
 	};
 
-	unsigned long set26[] = {
+	static const unsigned long set26[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140729464770560, 140737488351231,
 SNULL, 140729464774655, 140737488351231,
@@ -22320,7 +22321,7 @@ ERASE, 140109040951296, 140109040959487,
 STORE, 140109040955392, 140109040959487,
 ERASE, 140109040955392, 140109040959487,
 	};
-	unsigned long set27[] = {
+	static const unsigned long set27[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140726128070656, 140737488351231,
 SNULL, 140726128074751, 140737488351231,
@@ -22716,7 +22717,7 @@ STORE, 140415509696512, 140415535910911,
 ERASE, 140415537422336, 140415562588159,
 STORE, 140415482433536, 140415509696511,
 	};
-	unsigned long set28[] = {
+	static const unsigned long set28[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140722475622400, 140737488351231,
 SNULL, 140722475626495, 140737488351231,
@@ -22784,7 +22785,7 @@ STORE, 139918413348864, 139918413352959,
 ERASE, 139918413316096, 139918413344767,
 STORE, 93865848528896, 93865848664063,
 	};
-	unsigned long set29[] = {
+	static const unsigned long set29[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140734467944448, 140737488351231,
 SNULL, 140734467948543, 140737488351231,
@@ -23659,7 +23660,7 @@ ERASE, 140143079972864, 140143088361471,
 ERASE, 140143205793792, 140143205797887,
 ERASE, 140143205797888, 140143214186495,
 	};
-	unsigned long set30[] = {
+	static const unsigned long set30[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140733436743680, 140737488351231,
 SNULL, 140733436747775, 140737488351231,
@@ -24541,7 +24542,7 @@ ERASE, 140165225893888, 140165225897983,
 ERASE, 140165225897984, 140165234286591,
 ERASE, 140165058105344, 140165058109439,
 	};
-	unsigned long set31[] = {
+	static const unsigned long set31[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140730890784768, 140737488351231,
 SNULL, 140730890788863, 140737488351231,
@@ -25354,7 +25355,7 @@ ERASE, 140623906590720, 140623914979327,
 ERASE, 140622950277120, 140622950281215,
 ERASE, 140622950281216, 140622958669823,
 	};
-	unsigned long set32[] = {
+	static const unsigned long set32[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140731244212224, 140737488351231,
 SNULL, 140731244216319, 140737488351231,
@@ -26150,7 +26151,7 @@ ERASE, 140400417288192, 140400425676799,
 ERASE, 140400283066368, 140400283070463,
 ERASE, 140400283070464, 140400291459071,
 	};
-	unsigned long set33[] = {
+	static const unsigned long set33[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140734562918400, 140737488351231,
 SNULL, 140734562922495, 140737488351231,
@@ -26292,7 +26293,7 @@ STORE, 140582961786880, 140583003750399,
 ERASE, 140582961786880, 140583003750399,
 	};
 
-	unsigned long set34[] = {
+	static const unsigned long set34[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140731327180800, 140737488351231,
 SNULL, 140731327184895, 140737488351231,
@@ -27173,7 +27174,7 @@ ERASE, 140012522094592, 140012530483199,
 ERASE, 140012033142784, 140012033146879,
 ERASE, 140012033146880, 140012041535487,
 	};
-	unsigned long set35[] = {
+	static const unsigned long set35[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140730536939520, 140737488351231,
 SNULL, 140730536943615, 140737488351231,
@@ -27930,7 +27931,7 @@ ERASE, 140474471936000, 140474480324607,
 ERASE, 140474396430336, 140474396434431,
 ERASE, 140474396434432, 140474404823039,
 	};
-	unsigned long set36[] = {
+	static const unsigned long set36[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140723893125120, 140737488351231,
 SNULL, 140723893129215, 140737488351231,
@@ -28791,7 +28792,7 @@ ERASE, 140121890357248, 140121898745855,
 ERASE, 140121269587968, 140121269592063,
 ERASE, 140121269592064, 140121277980671,
 	};
-	unsigned long set37[] = {
+	static const unsigned long set37[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140722404016128, 140737488351231,
 SNULL, 140722404020223, 140737488351231,
@@ -28917,7 +28918,7 @@ STORE, 139759821246464, 139759888355327,
 ERASE, 139759821246464, 139759888355327,
 ERASE, 139759888355328, 139759955464191,
 	};
-	unsigned long set38[] = {
+	static const unsigned long set38[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140730666221568, 140737488351231,
 SNULL, 140730666225663, 140737488351231,
@@ -29727,7 +29728,7 @@ ERASE, 140613504712704, 140613504716799,
 ERASE, 140613504716800, 140613513105407,
 	};
 
-	unsigned long set39[] = {
+	static const unsigned long set39[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140736271417344, 140737488351231,
 SNULL, 140736271421439, 140737488351231,
@@ -30099,7 +30100,7 @@ STORE, 140325364428800, 140325372821503,
 STORE, 140325356036096, 140325364428799,
 SNULL, 140325364432895, 140325372821503,
 	};
-	unsigned long set40[] = {
+	static const unsigned long set40[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140734309167104, 140737488351231,
 SNULL, 140734309171199, 140737488351231,
@@ -30850,7 +30851,7 @@ ERASE, 140320289300480, 140320289304575,
 ERASE, 140320289304576, 140320297693183,
 ERASE, 140320163409920, 140320163414015,
 	};
-	unsigned long set41[] = {
+	static const unsigned long set41[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140728157171712, 140737488351231,
 SNULL, 140728157175807, 140737488351231,
@@ -31160,7 +31161,7 @@ STORE, 94376135090176, 94376135094271,
 STORE, 94376135094272, 94376135098367,
 SNULL, 94376135094272, 94377208836095,
 	};
-	unsigned long set42[] = {
+	static const unsigned long set42[] = {
 STORE, 314572800, 1388314623,
 STORE, 1462157312, 1462169599,
 STORE, 1462169600, 1462185983,
@@ -33837,7 +33838,7 @@ SNULL, 3798999040, 3799101439,
  */
 	};
 
-	unsigned long set43[] = {
+	static const unsigned long set43[] = {
 STORE, 140737488347136, 140737488351231,
 STORE, 140734187720704, 140737488351231,
 SNULL, 140734187724800, 140737488351231,
@@ -34971,7 +34972,7 @@ void run_check_rcu_slowread(struct maple_tree *mt, struct rcu_test_struct *vals)
 	MT_BUG_ON(mt, !vals->seen_entry3);
 	MT_BUG_ON(mt, !vals->seen_both);
 }
-static noinline void check_rcu_simulated(struct maple_tree *mt)
+static noinline void __init check_rcu_simulated(struct maple_tree *mt)
 {
 	unsigned long i, nr_entries = 1000;
 	unsigned long target = 4320;
@@ -35132,7 +35133,7 @@ static noinline void check_rcu_simulated(struct maple_tree *mt)
 	rcu_unregister_thread();
 }
 
-static noinline void check_rcu_threaded(struct maple_tree *mt)
+static noinline void __init check_rcu_threaded(struct maple_tree *mt)
 {
 	unsigned long i, nr_entries = 1000;
 	struct rcu_test_struct vals;
@@ -35341,7 +35342,7 @@ static void check_dfs_preorder(struct maple_tree *mt)
 /* End of depth first search tests */
 
 /* Preallocation testing */
-static noinline void check_prealloc(struct maple_tree *mt)
+static noinline void __init check_prealloc(struct maple_tree *mt)
 {
 	unsigned long i, max = 100;
 	unsigned long allocated;
@@ -35469,7 +35470,7 @@ static noinline void check_prealloc(struct maple_tree *mt)
 /* End of preallocation testing */
 
 /* Spanning writes, writes that span nodes and layers of the tree */
-static noinline void check_spanning_write(struct maple_tree *mt)
+static noinline void __init check_spanning_write(struct maple_tree *mt)
 {
 	unsigned long i, max = 5000;
 	MA_STATE(mas, mt, 1200, 2380);
@@ -35637,7 +35638,7 @@ static noinline void check_spanning_write(struct maple_tree *mt)
 /* End of spanning write testing */
 
 /* Writes to a NULL area that are adjacent to other NULLs */
-static noinline void check_null_expand(struct maple_tree *mt)
+static noinline void __init check_null_expand(struct maple_tree *mt)
 {
 	unsigned long i, max = 100;
 	unsigned char data_end;
@@ -35698,7 +35699,7 @@ static noinline void check_null_expand(struct maple_tree *mt)
 /* End of NULL area expansions */
 
 /* Checking for no memory is best done outside the kernel */
-static noinline void check_nomem(struct maple_tree *mt)
+static noinline void __init check_nomem(struct maple_tree *mt)
 {
 	MA_STATE(ms, mt, 1, 1);
 
@@ -35733,7 +35734,7 @@ static noinline void check_nomem(struct maple_tree *mt)
 	mtree_destroy(mt);
 }
 
-static noinline void check_locky(struct maple_tree *mt)
+static noinline void __init check_locky(struct maple_tree *mt)
 {
 	MA_STATE(ms, mt, 2, 2);
 	MA_STATE(reader, mt, 2, 2);
-- 
2.39.2

[PATCH 6.1 064/228] maple_tree: fix 32 bit mas_next testing

[Greg Kroah-Hartman]

From: Liam R. Howlett <Liam.Howlett@oracle.com>

[ Upstream commit 7a93c71a6714ca1a9c03d70432dac104b0cfb815 ]

The test setup of mas_next is dependent on node entry size to create a 2
level tree, but the tests did not account for this in the expected value
when shifting beyond the scope of the tree.

Fix this by setting up the test to succeed depending on the node entries
which is dependent on the 32/64 bit setup.

Link: https://lkml.kernel.org/r/20230712173916.168805-1-Liam.Howlett@oracle.com
Fixes: 120b116208a0 ("maple_tree: reorganize testing to restore module testing")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
  Closes: https://lore.kernel.org/linux-mm/CAMuHMdV4T53fOw7VPoBgPR7fP6RYqf=CBhD_y_vOg53zZX_DnA@mail.gmail.com/
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/test_maple_tree.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/lib/test_maple_tree.c b/lib/test_maple_tree.c
index 261bad680f81d..fad668042f3e7 100644
--- a/lib/test_maple_tree.c
+++ b/lib/test_maple_tree.c
@@ -1863,13 +1863,16 @@ static noinline void __init next_prev_test(struct maple_tree *mt)
 						   725};
 	static const unsigned long level2_32[] = { 1747, 2000, 1750, 1755,
 						   1760, 1765};
+	unsigned long last_index;
 
 	if (MAPLE_32BIT) {
 		nr_entries = 500;
 		level2 = level2_32;
+		last_index = 0x138e;
 	} else {
 		nr_entries = 200;
 		level2 = level2_64;
+		last_index = 0x7d6;
 	}
 
 	for (i = 0; i <= nr_entries; i++)
@@ -1976,7 +1979,7 @@ static noinline void __init next_prev_test(struct maple_tree *mt)
 
 	val = mas_next(&mas, ULONG_MAX);
 	MT_BUG_ON(mt, val != NULL);
-	MT_BUG_ON(mt, mas.index != ULONG_MAX);
+	MT_BUG_ON(mt, mas.index != last_index);
 	MT_BUG_ON(mt, mas.last != ULONG_MAX);
 
 	val = mas_prev(&mas, 0);
-- 
2.39.2

[PATCH 6.1 065/228] drm/amd/display: Rework comments on dc file

[Greg Kroah-Hartman]

From: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>

[ Upstream commit e366f36958f60c431a7430c8c421c9db0ec6738d ]

The file dc.c has multiple comments that do not follow the kernel-doc or
are made in a distracting way. This commit alleviates part of this issue
by reorganizing some comments inside the dc file.

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 2a9482e55968 ("drm/amd/display: Prevent vtotal from being set to 0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc.c | 161 +++++++++--------------
 drivers/gpu/drm/amd/display/dc/dc.h      |  32 ++---
 2 files changed, 70 insertions(+), 123 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 629bc53f61877..85ed1c7cdeaa9 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -135,9 +135,7 @@ static const char DC_BUILD_ID[] = "production-build";
  * one or two (in the pipe-split case).
  */
 
-/*******************************************************************************
- * Private functions
- ******************************************************************************/
+/* Private functions */
 
 static inline void elevate_update_type(enum surface_update_type *original, enum surface_update_type new)
 {
@@ -429,18 +427,14 @@ bool dc_stream_adjust_vmin_vmax(struct dc *dc,
 }
 
 /**
- *****************************************************************************
- *  Function: dc_stream_get_last_vrr_vtotal
+ * dc_stream_get_last_used_drr_vtotal - dc_stream_get_last_vrr_vtotal
  *
- *  @brief
- *     Looks up the pipe context of dc_stream_state and gets the
- *     last VTOTAL used by DRR (Dynamic Refresh Rate)
+ * @dc: [in] dc reference
+ * @stream: [in] Initial dc stream state
+ * @adjust: [in] Updated parameters for vertical_total_min and
  *
- *  @param [in] dc: dc reference
- *  @param [in] stream: Initial dc stream state
- *  @param [in] adjust: Updated parameters for vertical_total_min and
- *  vertical_total_max
- *****************************************************************************
+ * Looks up the pipe context of dc_stream_state and gets the last VTOTAL used
+ * by DRR (Dynamic Refresh Rate)
  */
 bool dc_stream_get_last_used_drr_vtotal(struct dc *dc,
 		struct dc_stream_state *stream,
@@ -1236,9 +1230,7 @@ static void wait_for_no_pipes_pending(struct dc *dc, struct dc_state *context)
 	PERF_TRACE();
 }
 
-/*******************************************************************************
- * Public functions
- ******************************************************************************/
+/* Public functions */
 
 struct dc *dc_create(const struct dc_init_data *init_params)
 {
@@ -4560,21 +4552,17 @@ void dc_mclk_switch_using_fw_based_vblank_stretch_shut_down(struct dc *dc)
 		dc->current_state->bw_ctx.bw.dcn.clk.fw_based_mclk_switching_shut_down = true;
 }
 
-/*
- *****************************************************************************
- * Function: dc_is_dmub_outbox_supported -
+/**
+ * dc_is_dmub_outbox_supported - Check if DMUB firmware support outbox notification
  *
- * @brief
- *      Checks whether DMUB FW supports outbox notifications, if supported
- *		DM should register outbox interrupt prior to actually enabling interrupts
- *		via dc_enable_dmub_outbox
+ * @dc: [in] dc structure
  *
- *  @param
- *		[in] dc: dc structure
+ * Checks whether DMUB FW supports outbox notifications, if supported DM
+ * should register outbox interrupt prior to actually enabling interrupts
+ * via dc_enable_dmub_outbox
  *
- *  @return
- *		True if DMUB FW supports outbox notifications, False otherwise
- *****************************************************************************
+ * Return:
+ * True if DMUB FW supports outbox notifications, False otherwise
  */
 bool dc_is_dmub_outbox_supported(struct dc *dc)
 {
@@ -4592,21 +4580,17 @@ bool dc_is_dmub_outbox_supported(struct dc *dc)
 	return dc->debug.enable_dmub_aux_for_legacy_ddc;
 }
 
-/*
- *****************************************************************************
- *  Function: dc_enable_dmub_notifications
+/**
+ * dc_enable_dmub_notifications - Check if dmub fw supports outbox
  *
- *  @brief
- *		Calls dc_is_dmub_outbox_supported to check if dmub fw supports outbox
- *		notifications. All DMs shall switch to dc_is_dmub_outbox_supported.
- *		This API shall be removed after switching.
+ * @dc: [in] dc structure
  *
- *  @param
- *		[in] dc: dc structure
+ * Calls dc_is_dmub_outbox_supported to check if dmub fw supports outbox
+ * notifications. All DMs shall switch to dc_is_dmub_outbox_supported.  This
+ * API shall be removed after switching.
  *
- *  @return
- *		True if DMUB FW supports outbox notifications, False otherwise
- *****************************************************************************
+ * Return:
+ * True if DMUB FW supports outbox notifications, False otherwise
  */
 bool dc_enable_dmub_notifications(struct dc *dc)
 {
@@ -4614,18 +4598,11 @@ bool dc_enable_dmub_notifications(struct dc *dc)
 }
 
 /**
- *****************************************************************************
- *  Function: dc_enable_dmub_outbox
+ * dc_enable_dmub_outbox - Enables DMUB unsolicited notification
  *
- *  @brief
- *		Enables DMUB unsolicited notifications to x86 via outbox
+ * dc: [in] dc structure
  *
- *  @param
- *		[in] dc: dc structure
- *
- *  @return
- *		None
- *****************************************************************************
+ * Enables DMUB unsolicited notifications to x86 via outbox.
  */
 void dc_enable_dmub_outbox(struct dc *dc)
 {
@@ -4726,21 +4703,17 @@ uint8_t get_link_index_from_dpia_port_index(const struct dc *dc,
 }
 
 /**
- *****************************************************************************
- *  Function: dc_process_dmub_set_config_async
+ * dc_process_dmub_set_config_async - Submits set_config command
  *
- *  @brief
- *		Submits set_config command to dmub via inbox message
+ * @dc: [in] dc structure
+ * @link_index: [in] link_index: link index
+ * @payload: [in] aux payload
+ * @notify: [out] set_config immediate reply
  *
- *  @param
- *		[in] dc: dc structure
- *		[in] link_index: link index
- *		[in] payload: aux payload
- *		[out] notify: set_config immediate reply
+ * Submits set_config command to dmub via inbox message.
  *
- *  @return
- *		True if successful, False if failure
- *****************************************************************************
+ * Return:
+ * True if successful, False if failure
  */
 bool dc_process_dmub_set_config_async(struct dc *dc,
 				uint32_t link_index,
@@ -4776,21 +4749,17 @@ bool dc_process_dmub_set_config_async(struct dc *dc,
 }
 
 /**
- *****************************************************************************
- *  Function: dc_process_dmub_set_mst_slots
+ * dc_process_dmub_set_mst_slots - Submits MST solt allocation
  *
- *  @brief
- *		Submits mst slot allocation command to dmub via inbox message
+ * @dc: [in] dc structure
+ * @link_index: [in] link index
+ * @mst_alloc_slots: [in] mst slots to be allotted
+ * @mst_slots_in_use: [out] mst slots in use returned in failure case
  *
- *  @param
- *		[in] dc: dc structure
- *		[in] link_index: link index
- *		[in] mst_alloc_slots: mst slots to be allotted
- *		[out] mst_slots_in_use: mst slots in use returned in failure case
+ * Submits mst slot allocation command to dmub via inbox message
  *
- *	@return
- *		DC_OK if successful, DC_ERROR if failure
- *****************************************************************************
+ * Return:
+ * DC_OK if successful, DC_ERROR if failure
  */
 enum dc_status dc_process_dmub_set_mst_slots(const struct dc *dc,
 				uint32_t link_index,
@@ -4830,19 +4799,12 @@ enum dc_status dc_process_dmub_set_mst_slots(const struct dc *dc,
 }
 
 /**
- *****************************************************************************
- *  Function: dc_process_dmub_dpia_hpd_int_enable
- *
- *  @brief
- *		Submits dpia hpd int enable command to dmub via inbox message
+ * dc_process_dmub_dpia_hpd_int_enable - Submits DPIA DPD interruption
  *
- *  @param
- *		[in] dc: dc structure
- *		[in] hpd_int_enable: 1 for hpd int enable, 0 to disable
+ * @dc [in]: dc structure
+ * @hpd_int_enable [in]: 1 for hpd int enable, 0 to disable
  *
- *	@return
- *		None
- *****************************************************************************
+ * Submits dpia hpd int enable command to dmub via inbox message
  */
 void dc_process_dmub_dpia_hpd_int_enable(const struct dc *dc,
 				uint32_t hpd_int_enable)
@@ -4871,16 +4833,13 @@ void dc_disable_accelerated_mode(struct dc *dc)
 
 
 /**
- *****************************************************************************
- *  dc_notify_vsync_int_state() - notifies vsync enable/disable state
+ *  dc_notify_vsync_int_state - notifies vsync enable/disable state
  *  @dc: dc structure
- *	@stream: stream where vsync int state changed
- *	@enable: whether vsync is enabled or disabled
+ *  @stream: stream where vsync int state changed
+ *  @enable: whether vsync is enabled or disabled
  *
- *  Called when vsync is enabled/disabled
- *	Will notify DMUB to start/stop ABM interrupts after steady state is reached
- *
- *****************************************************************************
+ *  Called when vsync is enabled/disabled Will notify DMUB to start/stop ABM
+ *  interrupts after steady state is reached.
  */
 void dc_notify_vsync_int_state(struct dc *dc, struct dc_stream_state *stream, bool enable)
 {
@@ -4922,14 +4881,18 @@ void dc_notify_vsync_int_state(struct dc *dc, struct dc_stream_state *stream, bo
 	if (pipe->stream_res.abm && pipe->stream_res.abm->funcs->set_abm_pause)
 		pipe->stream_res.abm->funcs->set_abm_pause(pipe->stream_res.abm, !enable, i, pipe->stream_res.tg->inst);
 }
-/*
- * dc_extended_blank_supported: Decide whether extended blank is supported
+
+/**
+ * dc_extended_blank_supported 0 Decide whether extended blank is supported
  *
- * Extended blank is a freesync optimization feature to be enabled in the future.
- * During the extra vblank period gained from freesync, we have the ability to enter z9/z10.
+ * @dc: [in] Current DC state
  *
- * @param [in] dc: Current DC state
- * @return: Indicate whether extended blank is supported (true or false)
+ * Extended blank is a freesync optimization feature to be enabled in the
+ * future.  During the extra vblank period gained from freesync, we have the
+ * ability to enter z9/z10.
+ *
+ * Return:
+ * Indicate whether extended blank is supported (true or false)
  */
 bool dc_extended_blank_supported(struct dc *dc)
 {
diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h
index e2c5a68bbc807..178d410183631 100644
--- a/drivers/gpu/drm/amd/display/dc/dc.h
+++ b/drivers/gpu/drm/amd/display/dc/dc.h
@@ -56,9 +56,7 @@ struct dmub_notification;
 #define MIN_VIEWPORT_SIZE 12
 #define MAX_NUM_EDP 2
 
-/*******************************************************************************
- * Display Core Interfaces
- ******************************************************************************/
+/* Display Core Interfaces */
 struct dc_versions {
 	const char *dc_ver;
 	struct dmcu_version dmcu_version;
@@ -993,9 +991,7 @@ void dc_init_callbacks(struct dc *dc,
 void dc_deinit_callbacks(struct dc *dc);
 void dc_destroy(struct dc **dc);
 
-/*******************************************************************************
- * Surface Interfaces
- ******************************************************************************/
+/* Surface Interfaces */
 
 enum {
 	TRANSFER_FUNC_POINTS = 1025
@@ -1350,9 +1346,7 @@ struct dc_state *dc_copy_state(struct dc_state *src_ctx);
 void dc_retain_state(struct dc_state *context);
 void dc_release_state(struct dc_state *context);
 
-/*******************************************************************************
- * Link Interfaces
- ******************************************************************************/
+/* Link Interfaces */
 
 struct dpcd_caps {
 	union dpcd_rev dpcd_rev;
@@ -1454,9 +1448,7 @@ struct hdcp_caps {
 
 uint32_t dc_get_opp_for_plane(struct dc *dc, struct dc_plane_state *plane);
 
-/*******************************************************************************
- * Sink Interfaces - A sink corresponds to a display output device
- ******************************************************************************/
+/* Sink Interfaces - A sink corresponds to a display output device */
 
 struct dc_container_id {
 	// 128bit GUID in binary form
@@ -1539,9 +1531,7 @@ struct dc_cursor {
 };
 
 
-/*******************************************************************************
- * Interrupt interfaces
- ******************************************************************************/
+/* Interrupt interfaces */
 enum dc_irq_source dc_interrupt_to_irq_source(
 		struct dc *dc,
 		uint32_t src_id,
@@ -1553,9 +1543,7 @@ enum dc_irq_source dc_get_hpd_irq_source_at_index(
 
 void dc_notify_vsync_int_state(struct dc *dc, struct dc_stream_state *stream, bool enable);
 
-/*******************************************************************************
- * Power Interfaces
- ******************************************************************************/
+/* Power Interfaces */
 
 void dc_set_power_state(
 		struct dc *dc,
@@ -1628,14 +1616,10 @@ enum dc_status dc_process_dmub_set_mst_slots(const struct dc *dc,
 void dc_process_dmub_dpia_hpd_int_enable(const struct dc *dc,
 				uint32_t hpd_int_enable);
 
-/*******************************************************************************
- * DSC Interfaces
- ******************************************************************************/
+/* DSC Interfaces */
 #include "dc_dsc.h"
 
-/*******************************************************************************
- * Disable acc mode Interfaces
- ******************************************************************************/
+/* Disable acc mode Interfaces */
 void dc_disable_accelerated_mode(struct dc *dc);
 
 #endif /* DC_INTERFACE_H_ */
-- 
2.39.2

[PATCH 6.1 066/228] drm/amd/display: fix dc/core/dc.c kernel-doc

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit db4107e92a817502ad19fdd30250f87dcb6f6331 ]

Fix all kernel-doc warnings in dc/core/dc.c:

dc.c:385: warning: missing initial short description on line:
 *  dc_stream_adjust_vmin_vmax:
dc.c:392: warning: contents before sections
dc.c:399: warning: No description found for return value of 'dc_stream_adjust_vmin_vmax'
dc.c:434: warning: Excess function parameter 'adjust' description in 'dc_stream_get_last_used_drr_vtotal'
dc.c:434: warning: No description found for return value of 'dc_stream_get_last_used_drr_vtotal'
dc.c:574: warning: No description found for return value of 'dc_stream_configure_crc'
dc.c:1746: warning: No description found for return value of 'dc_commit_state_no_check'
dc.c:4991: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * dc_extended_blank_supported 0 Decide whether extended blank is supported
dc.c:4991: warning: missing initial short description on line:
 * dc_extended_blank_supported 0 Decide whether extended blank is supported
dc.c:4723: warning: Function parameter or member 'dc' not described in 'dc_enable_dmub_outbox'
dc.c:4926: warning: Function parameter or member 'dc' not described in 'dc_process_dmub_dpia_hpd_int_enable'
dc.c:4926: warning: Function parameter or member 'hpd_int_enable' not described in 'dc_process_dmub_dpia_hpd_int_enable'
12 warnings

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 2a9482e55968 ("drm/amd/display: Prevent vtotal from being set to 0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc.c | 40 +++++++++++++++---------
 1 file changed, 25 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 85ed1c7cdeaa9..6e2220e2e5ba3 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -382,16 +382,18 @@ static void dc_perf_trace_destroy(struct dc_perf_trace **perf_trace)
 }
 
 /**
- *  dc_stream_adjust_vmin_vmax:
+ *  dc_stream_adjust_vmin_vmax - look up pipe context & update parts of DRR
+ *  @dc:     dc reference
+ *  @stream: Initial dc stream state
+ *  @adjust: Updated parameters for vertical_total_min and vertical_total_max
  *
  *  Looks up the pipe context of dc_stream_state and updates the
  *  vertical_total_min and vertical_total_max of the DRR, Dynamic Refresh
  *  Rate, which is a power-saving feature that targets reducing panel
  *  refresh rate while the screen is static
  *
- *  @dc:     dc reference
- *  @stream: Initial dc stream state
- *  @adjust: Updated parameters for vertical_total_min and vertical_total_max
+ *  Return: %true if the pipe context is found and adjusted;
+ *          %false if the pipe context is not found.
  */
 bool dc_stream_adjust_vmin_vmax(struct dc *dc,
 		struct dc_stream_state *stream,
@@ -427,14 +429,17 @@ bool dc_stream_adjust_vmin_vmax(struct dc *dc,
 }
 
 /**
- * dc_stream_get_last_used_drr_vtotal - dc_stream_get_last_vrr_vtotal
+ * dc_stream_get_last_used_drr_vtotal - Looks up the pipe context of
+ * dc_stream_state and gets the last VTOTAL used by DRR (Dynamic Refresh Rate)
  *
  * @dc: [in] dc reference
  * @stream: [in] Initial dc stream state
- * @adjust: [in] Updated parameters for vertical_total_min and
+ * @refresh_rate: [in] new refresh_rate
  *
- * Looks up the pipe context of dc_stream_state and gets the last VTOTAL used
- * by DRR (Dynamic Refresh Rate)
+ * Return: %true if the pipe context is found and there is an associated
+ *         timing_generator for the DC;
+ *         %false if the pipe context is not found or there is no
+ *         timing_generator for the DC.
  */
 bool dc_stream_get_last_used_drr_vtotal(struct dc *dc,
 		struct dc_stream_state *stream,
@@ -581,7 +586,10 @@ bool dc_stream_stop_dmcu_crc_win_update(struct dc *dc, struct dc_stream_state *s
  *              once.
  *
  * By default, only CRC0 is configured, and the entire frame is used to
- * calculate the crc.
+ * calculate the CRC.
+ *
+ * Return: %false if the stream is not found or CRC capture is not supported;
+ *         %true if the stream has been configured.
  */
 bool dc_stream_configure_crc(struct dc *dc, struct dc_stream_state *stream,
 			     struct crc_params *crc_window, bool enable, bool continuous)
@@ -650,7 +658,7 @@ bool dc_stream_configure_crc(struct dc *dc, struct dc_stream_state *stream,
  * dc_stream_configure_crc needs to be called beforehand to enable CRCs.
  *
  * Return:
- * false if stream is not found, or if CRCs are not enabled.
+ * %false if stream is not found, or if CRCs are not enabled.
  */
 bool dc_stream_get_crc(struct dc *dc, struct dc_stream_state *stream,
 		       uint32_t *r_cr, uint32_t *g_y, uint32_t *b_cb)
@@ -1739,6 +1747,8 @@ void dc_z10_save_init(struct dc *dc)
 /*
  * Applies given context to HW and copy it into current context.
  * It's up to the user to release the src context afterwards.
+ *
+ * Return: an enum dc_status result code for the operation
  */
 static enum dc_status dc_commit_state_no_check(struct dc *dc, struct dc_state *context)
 {
@@ -4600,7 +4610,7 @@ bool dc_enable_dmub_notifications(struct dc *dc)
 /**
  * dc_enable_dmub_outbox - Enables DMUB unsolicited notification
  *
- * dc: [in] dc structure
+ * @dc: [in] dc structure
  *
  * Enables DMUB unsolicited notifications to x86 via outbox.
  */
@@ -4801,8 +4811,8 @@ enum dc_status dc_process_dmub_set_mst_slots(const struct dc *dc,
 /**
  * dc_process_dmub_dpia_hpd_int_enable - Submits DPIA DPD interruption
  *
- * @dc [in]: dc structure
- * @hpd_int_enable [in]: 1 for hpd int enable, 0 to disable
+ * @dc: [in] dc structure
+ * @hpd_int_enable: [in] 1 for hpd int enable, 0 to disable
  *
  * Submits dpia hpd int enable command to dmub via inbox message
  */
@@ -4883,7 +4893,7 @@ void dc_notify_vsync_int_state(struct dc *dc, struct dc_stream_state *stream, bo
 }
 
 /**
- * dc_extended_blank_supported 0 Decide whether extended blank is supported
+ * dc_extended_blank_supported - Decide whether extended blank is supported
  *
  * @dc: [in] Current DC state
  *
@@ -4892,7 +4902,7 @@ void dc_notify_vsync_int_state(struct dc *dc, struct dc_stream_state *stream, bo
  * ability to enter z9/z10.
  *
  * Return:
- * Indicate whether extended blank is supported (true or false)
+ * Indicate whether extended blank is supported (%true or %false)
  */
 bool dc_extended_blank_supported(struct dc *dc)
 {
-- 
2.39.2

[PATCH 6.1 067/228] drm/amd/display: Add FAMS validation before trying to use it

[Greg Kroah-Hartman]

From: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>

[ Upstream commit e3416e872f84086667df21daf166506fab97358d ]

To ensure that FAMS can be used, DC must check if there is VRR support.
This commit adds the required configuration to ensure FAMS can be executed in the target system.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 2a9482e55968 ("drm/amd/display: Prevent vtotal from being set to 0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc.c          | 6 ++++++
 drivers/gpu/drm/amd/display/dc/dc_stream.h        | 1 +
 drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c | 7 ++++++-
 drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h   | 2 +-
 4 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 6e2220e2e5ba3..27cec123cb06f 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -2588,6 +2588,12 @@ static enum surface_update_type check_update_surfaces_for_stream(
 
 		if (stream_update->mst_bw_update)
 			su_flags->bits.mst_bw = 1;
+
+		if (stream_update->stream && stream_update->stream->freesync_on_desktop &&
+			(stream_update->vrr_infopacket || stream_update->allow_freesync ||
+				stream_update->vrr_active_variable))
+			su_flags->bits.fams_changed = 1;
+
 		if (stream_update->crtc_timing_adjust && dc_extended_blank_supported(dc))
 			su_flags->bits.crtc_timing_adjust = 1;
 
diff --git a/drivers/gpu/drm/amd/display/dc/dc_stream.h b/drivers/gpu/drm/amd/display/dc/dc_stream.h
index 73dccd485895d..364ff913527d8 100644
--- a/drivers/gpu/drm/amd/display/dc/dc_stream.h
+++ b/drivers/gpu/drm/amd/display/dc/dc_stream.h
@@ -131,6 +131,7 @@ union stream_update_flags {
 		uint32_t dsc_changed : 1;
 		uint32_t mst_bw : 1;
 		uint32_t crtc_timing_adjust : 1;
+		uint32_t fams_changed : 1;
 	} bits;
 
 	uint32_t raw;
diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c
index 25749f7d88366..94894fd6c9062 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c
@@ -292,7 +292,12 @@ void optc3_wait_drr_doublebuffer_pending_clear(struct timing_generator *optc)
 
 void optc3_set_vtotal_min_max(struct timing_generator *optc, int vtotal_min, int vtotal_max)
 {
-	optc1_set_vtotal_min_max(optc, vtotal_min, vtotal_max);
+	struct dc *dc = optc->ctx->dc;
+
+	if (dc->caps.dmub_caps.mclk_sw && !dc->debug.disable_fams)
+		dc_dmub_srv_drr_update_cmd(dc, optc->inst, vtotal_min, vtotal_max);
+	else
+		optc1_set_vtotal_min_max(optc, vtotal_min, vtotal_max);
 }
 
 void optc3_tg_init(struct timing_generator *optc)
diff --git a/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h b/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h
index 27a4ea7dc74ec..d8c05bc45957b 100644
--- a/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h
+++ b/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h
@@ -345,7 +345,7 @@ union dmub_fw_boot_status {
 		uint32_t optimized_init_done : 1; /**< 1 if optimized init done */
 		uint32_t restore_required : 1; /**< 1 if driver should call restore */
 		uint32_t defer_load : 1; /**< 1 if VBIOS data is deferred programmed */
-		uint32_t reserved : 1;
+		uint32_t fams_enabled : 1; /**< 1 if VBIOS data is deferred programmed */
 		uint32_t detection_required: 1; /**<  if detection need to be triggered by driver */
 
 	} bits; /**< status bits */
-- 
2.39.2

[PATCH 6.1 068/228] drm/amd/display: update extended blank for dcn314 onwards

[Greg Kroah-Hartman]

From: Gabe Teeger <gabe.teeger@amd.com>

[ Upstream commit 469a62938a45ef382c9cb7b9fec6c6c1fcd781c0 ]

[Why]
Flickering and underflow was observed when testing extended
blank on dcn314.

[What]
Vstartup is contrainted by vblank_nom, so adjusting it to include
non-adjusted vtotal in its calculation during freesync video
means that Vstartup is not changed when vtotal changes.
This fixed the flickering + underflow.

dc_extended_blank_supported function was removed
because extended blank is only relevant to when
zstate is supported. The increased vtotal during
freesync can be passed to dml regardless of whether
extended blank is supported or not, so this function is
not needed.

Updates were made recently in dml to the calculation of
min_dst_y_next_start. Dml input for dcn314 will now
always use the newer calculation for min_dst_y_next_start.
Dml input for older dcn versions remains untouched.

The variable optimized_min_dst_y_next_start
is replaced everywhere with min_dst_y_next_start,
and the updated dml allows min_dst_y_next_start to
increase to an optimized value during freesync video,
then return to default when freesync is disengaged.

Also removed registry key for controlling
extended blank feature.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 2a9482e55968 ("drm/amd/display: Prevent vtotal from being set to 0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc.c      | 21 -----------------
 drivers/gpu/drm/amd/display/dc/dc.h           |  2 --
 .../drm/amd/display/dc/dcn20/dcn20_hwseq.c    |  4 ++--
 .../drm/amd/display/dc/dml/dcn20/dcn20_fpu.c  | 23 +++++++++----------
 .../dc/dml/dcn31/display_rq_dlg_calc_31.c     |  3 +--
 .../amd/display/dc/dml/dcn314/dcn314_fpu.c    | 14 +++++++----
 .../dc/dml/dcn314/display_rq_dlg_calc_314.c   | 16 ++++---------
 .../amd/display/dc/dml/display_mode_structs.h |  3 +--
 8 files changed, 29 insertions(+), 57 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 27cec123cb06f..8f9c60ed6f8b8 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -2594,9 +2594,6 @@ static enum surface_update_type check_update_surfaces_for_stream(
 				stream_update->vrr_active_variable))
 			su_flags->bits.fams_changed = 1;
 
-		if (stream_update->crtc_timing_adjust && dc_extended_blank_supported(dc))
-			su_flags->bits.crtc_timing_adjust = 1;
-
 		if (su_flags->raw != 0)
 			overall_type = UPDATE_TYPE_FULL;
 
@@ -4897,21 +4894,3 @@ void dc_notify_vsync_int_state(struct dc *dc, struct dc_stream_state *stream, bo
 	if (pipe->stream_res.abm && pipe->stream_res.abm->funcs->set_abm_pause)
 		pipe->stream_res.abm->funcs->set_abm_pause(pipe->stream_res.abm, !enable, i, pipe->stream_res.tg->inst);
 }
-
-/**
- * dc_extended_blank_supported - Decide whether extended blank is supported
- *
- * @dc: [in] Current DC state
- *
- * Extended blank is a freesync optimization feature to be enabled in the
- * future.  During the extra vblank period gained from freesync, we have the
- * ability to enter z9/z10.
- *
- * Return:
- * Indicate whether extended blank is supported (%true or %false)
- */
-bool dc_extended_blank_supported(struct dc *dc)
-{
-	return dc->debug.extended_blank_optimization && !dc->debug.disable_z10
-		&& dc->caps.zstate_support && dc->caps.is_apu;
-}
diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h
index 178d410183631..6409b8d8ff71e 100644
--- a/drivers/gpu/drm/amd/display/dc/dc.h
+++ b/drivers/gpu/drm/amd/display/dc/dc.h
@@ -1520,8 +1520,6 @@ struct dc_sink_init_data {
 	bool converter_disable_audio;
 };
 
-bool dc_extended_blank_supported(struct dc *dc);
-
 struct dc_sink *dc_sink_create(const struct dc_sink_init_data *init_params);
 
 /* Newer interfaces  */
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
index 622efa556e7ad..4ef632864948e 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
@@ -2036,7 +2036,7 @@ void dcn20_optimize_bandwidth(
 			dc->clk_mgr,
 			context,
 			true);
-	if (dc_extended_blank_supported(dc) && context->bw_ctx.bw.dcn.clk.zstate_support == DCN_ZSTATE_SUPPORT_ALLOW) {
+	if (context->bw_ctx.bw.dcn.clk.zstate_support == DCN_ZSTATE_SUPPORT_ALLOW) {
 		for (i = 0; i < dc->res_pool->pipe_count; ++i) {
 			struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i];
 
@@ -2044,7 +2044,7 @@ void dcn20_optimize_bandwidth(
 				&& pipe_ctx->stream->adjust.v_total_min == pipe_ctx->stream->adjust.v_total_max
 				&& pipe_ctx->stream->adjust.v_total_max > pipe_ctx->stream->timing.v_total)
 					pipe_ctx->plane_res.hubp->funcs->program_extended_blank(pipe_ctx->plane_res.hubp,
-						pipe_ctx->dlg_regs.optimized_min_dst_y_next_start);
+						pipe_ctx->dlg_regs.min_dst_y_next_start);
 		}
 	}
 }
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn20/dcn20_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn20/dcn20_fpu.c
index 186538e3e3c0c..dbe5d2efa4a30 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn20/dcn20_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn20/dcn20_fpu.c
@@ -948,10 +948,10 @@ static enum dcn_zstate_support_state  decide_zstate_support(struct dc *dc, struc
 {
 	int plane_count;
 	int i;
-	unsigned int optimized_min_dst_y_next_start_us;
+	unsigned int min_dst_y_next_start_us;
 
 	plane_count = 0;
-	optimized_min_dst_y_next_start_us = 0;
+	min_dst_y_next_start_us = 0;
 	for (i = 0; i < dc->res_pool->pipe_count; i++) {
 		if (context->res_ctx.pipe_ctx[i].plane_state)
 			plane_count++;
@@ -973,19 +973,18 @@ static enum dcn_zstate_support_state  decide_zstate_support(struct dc *dc, struc
 	else if (context->stream_count == 1 &&  context->streams[0]->signal == SIGNAL_TYPE_EDP) {
 		struct dc_link *link = context->streams[0]->sink->link;
 		struct dc_stream_status *stream_status = &context->stream_status[0];
+		struct dc_stream_state *current_stream = context->streams[0];
 		int minmum_z8_residency = dc->debug.minimum_z8_residency_time > 0 ? dc->debug.minimum_z8_residency_time : 1000;
 		bool allow_z8 = context->bw_ctx.dml.vba.StutterPeriod > (double)minmum_z8_residency;
 		bool is_pwrseq0 = link->link_index == 0;
+		bool isFreesyncVideo;
 
-		if (dc_extended_blank_supported(dc)) {
-			for (i = 0; i < dc->res_pool->pipe_count; i++) {
-				if (context->res_ctx.pipe_ctx[i].stream == context->streams[0]
-					&& context->res_ctx.pipe_ctx[i].stream->adjust.v_total_min == context->res_ctx.pipe_ctx[i].stream->adjust.v_total_max
-					&& context->res_ctx.pipe_ctx[i].stream->adjust.v_total_min > context->res_ctx.pipe_ctx[i].stream->timing.v_total) {
-						optimized_min_dst_y_next_start_us =
-							context->res_ctx.pipe_ctx[i].dlg_regs.optimized_min_dst_y_next_start_us;
-						break;
-				}
+		isFreesyncVideo = current_stream->adjust.v_total_min == current_stream->adjust.v_total_max;
+		isFreesyncVideo = isFreesyncVideo && current_stream->timing.v_total < current_stream->adjust.v_total_min;
+		for (i = 0; i < dc->res_pool->pipe_count; i++) {
+			if (context->res_ctx.pipe_ctx[i].stream == current_stream && isFreesyncVideo) {
+				min_dst_y_next_start_us = context->res_ctx.pipe_ctx[i].dlg_regs.min_dst_y_next_start_us;
+				break;
 			}
 		}
 
@@ -993,7 +992,7 @@ static enum dcn_zstate_support_state  decide_zstate_support(struct dc *dc, struc
 		if (stream_status->plane_count > 1)
 			return DCN_ZSTATE_SUPPORT_DISALLOW;
 
-		if (is_pwrseq0 && (context->bw_ctx.dml.vba.StutterPeriod > 5000.0 || optimized_min_dst_y_next_start_us > 5000))
+		if (is_pwrseq0 && (context->bw_ctx.dml.vba.StutterPeriod > 5000.0 || min_dst_y_next_start_us > 5000))
 			return DCN_ZSTATE_SUPPORT_ALLOW;
 		else if (is_pwrseq0 && link->psr_settings.psr_version == DC_PSR_VERSION_1 && !link->panel_config.psr.disable_psr)
 			return allow_z8 ? DCN_ZSTATE_SUPPORT_ALLOW_Z8_Z10_ONLY : DCN_ZSTATE_SUPPORT_ALLOW_Z10_ONLY;
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn31/display_rq_dlg_calc_31.c b/drivers/gpu/drm/amd/display/dc/dml/dcn31/display_rq_dlg_calc_31.c
index 35d10b4d018bf..d7ee26b62a5eb 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn31/display_rq_dlg_calc_31.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn31/display_rq_dlg_calc_31.c
@@ -988,8 +988,7 @@ static void dml_rq_dlg_get_dlg_params(
 
 	dlg_vblank_start = interlaced ? (vblank_start / 2) : vblank_start;
 	disp_dlg_regs->min_dst_y_next_start = (unsigned int) (((double) dlg_vblank_start) * dml_pow(2, 2));
-	disp_dlg_regs->optimized_min_dst_y_next_start_us = 0;
-	disp_dlg_regs->optimized_min_dst_y_next_start = disp_dlg_regs->min_dst_y_next_start;
+	disp_dlg_regs->min_dst_y_next_start_us = 0;
 	ASSERT(disp_dlg_regs->min_dst_y_next_start < (unsigned int)dml_pow(2, 18));
 
 	dml_print("DML_DLG: %s: min_ttu_vblank (us)         = %3.2f\n", __func__, min_ttu_vblank);
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn314/dcn314_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn314/dcn314_fpu.c
index bf77e56c3f3ef..395eed9f6b1be 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn314/dcn314_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn314/dcn314_fpu.c
@@ -288,6 +288,7 @@ int dcn314_populate_dml_pipes_from_context_fpu(struct dc *dc, struct dc_state *c
 	struct resource_context *res_ctx = &context->res_ctx;
 	struct pipe_ctx *pipe;
 	bool upscaled = false;
+	bool isFreesyncVideo = false;
 
 	dc_assert_fp_enabled();
 
@@ -301,9 +302,16 @@ int dcn314_populate_dml_pipes_from_context_fpu(struct dc *dc, struct dc_state *c
 		pipe = &res_ctx->pipe_ctx[i];
 		timing = &pipe->stream->timing;
 
-		if (dc_extended_blank_supported(dc) && pipe->stream->adjust.v_total_max == pipe->stream->adjust.v_total_min
-			&& pipe->stream->adjust.v_total_min > timing->v_total)
+		isFreesyncVideo = pipe->stream->adjust.v_total_max == pipe->stream->adjust.v_total_min;
+		isFreesyncVideo = isFreesyncVideo && pipe->stream->adjust.v_total_min > timing->v_total;
+
+		if (!isFreesyncVideo) {
+			pipes[pipe_cnt].pipe.dest.vblank_nom =
+				dcn3_14_ip.VBlankNomDefaultUS / (timing->h_total / (timing->pix_clk_100hz / 10000.0));
+		} else {
 			pipes[pipe_cnt].pipe.dest.vtotal = pipe->stream->adjust.v_total_min;
+			pipes[pipe_cnt].pipe.dest.vblank_nom = timing->v_total - pipes[pipe_cnt].pipe.dest.vactive;
+		}
 
 		if (pipe->plane_state &&
 				(pipe->plane_state->src_rect.height < pipe->plane_state->dst_rect.height ||
@@ -327,8 +335,6 @@ int dcn314_populate_dml_pipes_from_context_fpu(struct dc *dc, struct dc_state *c
 		pipes[pipe_cnt].pipe.src.dcc_fraction_of_zs_req_luma = 0;
 		pipes[pipe_cnt].pipe.src.dcc_fraction_of_zs_req_chroma = 0;
 		pipes[pipe_cnt].pipe.dest.vfront_porch = timing->v_front_porch;
-		pipes[pipe_cnt].pipe.dest.vblank_nom =
-				dcn3_14_ip.VBlankNomDefaultUS / (timing->h_total / (timing->pix_clk_100hz / 10000.0));
 		pipes[pipe_cnt].pipe.src.dcc_rate = 3;
 		pipes[pipe_cnt].dout.dsc_input_bpc = 0;
 
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn314/display_rq_dlg_calc_314.c b/drivers/gpu/drm/amd/display/dc/dml/dcn314/display_rq_dlg_calc_314.c
index 61ee9ba063a78..26561c0f5fbb6 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn314/display_rq_dlg_calc_314.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn314/display_rq_dlg_calc_314.c
@@ -1053,7 +1053,6 @@ static void dml_rq_dlg_get_dlg_params(
 
 	float vba__refcyc_per_req_delivery_pre_l = get_refcyc_per_req_delivery_pre_l_in_us(mode_lib, e2e_pipe_param, num_pipes, pipe_idx) * refclk_freq_in_mhz;  // From VBA
 	float vba__refcyc_per_req_delivery_l = get_refcyc_per_req_delivery_l_in_us(mode_lib, e2e_pipe_param, num_pipes, pipe_idx) * refclk_freq_in_mhz;  // From VBA
-	int blank_lines = 0;
 
 	memset(disp_dlg_regs, 0, sizeof(*disp_dlg_regs));
 	memset(disp_ttu_regs, 0, sizeof(*disp_ttu_regs));
@@ -1077,17 +1076,10 @@ static void dml_rq_dlg_get_dlg_params(
 	min_ttu_vblank = get_min_ttu_vblank_in_us(mode_lib, e2e_pipe_param, num_pipes, pipe_idx);	// From VBA
 
 	dlg_vblank_start = interlaced ? (vblank_start / 2) : vblank_start;
-	disp_dlg_regs->optimized_min_dst_y_next_start = disp_dlg_regs->min_dst_y_next_start;
-	disp_dlg_regs->optimized_min_dst_y_next_start_us = 0;
-	disp_dlg_regs->min_dst_y_next_start = (unsigned int) (((double) dlg_vblank_start) * dml_pow(2, 2));
-	blank_lines = (dst->vblank_end + dst->vtotal_min - dst->vblank_start - dst->vstartup_start - 1);
-	if (blank_lines < 0)
-		blank_lines = 0;
-	if (blank_lines != 0) {
-		disp_dlg_regs->optimized_min_dst_y_next_start = vba__min_dst_y_next_start;
-		disp_dlg_regs->optimized_min_dst_y_next_start_us = (disp_dlg_regs->optimized_min_dst_y_next_start * dst->hactive) / (unsigned int) dst->pixel_rate_mhz;
-		disp_dlg_regs->min_dst_y_next_start = disp_dlg_regs->optimized_min_dst_y_next_start;
-	}
+	disp_dlg_regs->min_dst_y_next_start_us =
+		(vba__min_dst_y_next_start * dst->hactive) / (unsigned int) dst->pixel_rate_mhz;
+	disp_dlg_regs->min_dst_y_next_start = vba__min_dst_y_next_start * dml_pow(2, 2);
+
 	ASSERT(disp_dlg_regs->min_dst_y_next_start < (unsigned int)dml_pow(2, 18));
 
 	dml_print("DML_DLG: %s: min_ttu_vblank (us)         = %3.2f\n", __func__, min_ttu_vblank);
diff --git a/drivers/gpu/drm/amd/display/dc/dml/display_mode_structs.h b/drivers/gpu/drm/amd/display/dc/dml/display_mode_structs.h
index 64d602e6412f1..6af0d5f469aeb 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/display_mode_structs.h
+++ b/drivers/gpu/drm/amd/display/dc/dml/display_mode_structs.h
@@ -618,8 +618,7 @@ struct _vcs_dpi_display_dlg_regs_st {
 	unsigned int refcyc_h_blank_end;
 	unsigned int dlg_vblank_end;
 	unsigned int min_dst_y_next_start;
-	unsigned int optimized_min_dst_y_next_start;
-	unsigned int optimized_min_dst_y_next_start_us;
+	unsigned int min_dst_y_next_start_us;
 	unsigned int refcyc_per_htotal;
 	unsigned int refcyc_x_after_scaler;
 	unsigned int dst_y_after_scaler;
-- 
2.39.2

[PATCH 6.1 069/228] drm/amd/display: Fix possible underflow for displays with large vblank

[Greg Kroah-Hartman]

From: Daniel Miess <daniel.miess@amd.com>

[ Upstream commit 1a4bcdbea4319efeb26cc4b05be859a7867e02dc ]

[Why]
Underflow observed when using a display with a large vblank region
and low refresh rate

[How]
Simplify calculation of vblank_nom

Increase value for VBlankNomDefaultUS to 800us

Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 2a9482e55968 ("drm/amd/display: Prevent vtotal from being set to 0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../amd/display/dc/dml/dcn314/dcn314_fpu.c    | 19 +++++++------------
 1 file changed, 7 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn314/dcn314_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn314/dcn314_fpu.c
index 395eed9f6b1be..a2a32cb9d5710 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn314/dcn314_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn314/dcn314_fpu.c
@@ -32,7 +32,7 @@
 #include "dml/display_mode_vba.h"
 
 struct _vcs_dpi_ip_params_st dcn3_14_ip = {
-	.VBlankNomDefaultUS = 668,
+	.VBlankNomDefaultUS = 800,
 	.gpuvm_enable = 1,
 	.gpuvm_max_page_table_levels = 1,
 	.hostvm_enable = 1,
@@ -288,7 +288,7 @@ int dcn314_populate_dml_pipes_from_context_fpu(struct dc *dc, struct dc_state *c
 	struct resource_context *res_ctx = &context->res_ctx;
 	struct pipe_ctx *pipe;
 	bool upscaled = false;
-	bool isFreesyncVideo = false;
+	const unsigned int max_allowed_vblank_nom = 1023;
 
 	dc_assert_fp_enabled();
 
@@ -302,16 +302,11 @@ int dcn314_populate_dml_pipes_from_context_fpu(struct dc *dc, struct dc_state *c
 		pipe = &res_ctx->pipe_ctx[i];
 		timing = &pipe->stream->timing;
 
-		isFreesyncVideo = pipe->stream->adjust.v_total_max == pipe->stream->adjust.v_total_min;
-		isFreesyncVideo = isFreesyncVideo && pipe->stream->adjust.v_total_min > timing->v_total;
-
-		if (!isFreesyncVideo) {
-			pipes[pipe_cnt].pipe.dest.vblank_nom =
-				dcn3_14_ip.VBlankNomDefaultUS / (timing->h_total / (timing->pix_clk_100hz / 10000.0));
-		} else {
-			pipes[pipe_cnt].pipe.dest.vtotal = pipe->stream->adjust.v_total_min;
-			pipes[pipe_cnt].pipe.dest.vblank_nom = timing->v_total - pipes[pipe_cnt].pipe.dest.vactive;
-		}
+		pipes[pipe_cnt].pipe.dest.vtotal = pipe->stream->adjust.v_total_min;
+		pipes[pipe_cnt].pipe.dest.vblank_nom = timing->v_total - pipes[pipe_cnt].pipe.dest.vactive;
+		pipes[pipe_cnt].pipe.dest.vblank_nom = min(pipes[pipe_cnt].pipe.dest.vblank_nom, dcn3_14_ip.VBlankNomDefaultUS);
+		pipes[pipe_cnt].pipe.dest.vblank_nom = max(pipes[pipe_cnt].pipe.dest.vblank_nom, timing->v_sync_width);
+		pipes[pipe_cnt].pipe.dest.vblank_nom = min(pipes[pipe_cnt].pipe.dest.vblank_nom, max_allowed_vblank_nom);
 
 		if (pipe->plane_state &&
 				(pipe->plane_state->src_rect.height < pipe->plane_state->dst_rect.height ||
-- 
2.39.2

[PATCH 6.1 070/228] drm/amd/display: Prevent vtotal from being set to 0

[Greg Kroah-Hartman]

From: Daniel Miess <daniel.miess@amd.com>

[ Upstream commit 2a9482e55968ed7368afaa9c2133404069117320 ]

[Why]
In dcn314 DML the destination pipe vtotal was being set
to the crtc adjustment vtotal_min value even in cases
where that value is 0.

[How]
Only set vtotal to the crtc adjustment vtotal_min value
in cases where the value is non-zero.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dml/dcn314/dcn314_fpu.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn314/dcn314_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn314/dcn314_fpu.c
index a2a32cb9d5710..8a88605827a84 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn314/dcn314_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn314/dcn314_fpu.c
@@ -302,7 +302,11 @@ int dcn314_populate_dml_pipes_from_context_fpu(struct dc *dc, struct dc_state *c
 		pipe = &res_ctx->pipe_ctx[i];
 		timing = &pipe->stream->timing;
 
-		pipes[pipe_cnt].pipe.dest.vtotal = pipe->stream->adjust.v_total_min;
+		if (pipe->stream->adjust.v_total_min != 0)
+			pipes[pipe_cnt].pipe.dest.vtotal = pipe->stream->adjust.v_total_min;
+		else
+			pipes[pipe_cnt].pipe.dest.vtotal = timing->v_total;
+
 		pipes[pipe_cnt].pipe.dest.vblank_nom = timing->v_total - pipes[pipe_cnt].pipe.dest.vactive;
 		pipes[pipe_cnt].pipe.dest.vblank_nom = min(pipes[pipe_cnt].pipe.dest.vblank_nom, dcn3_14_ip.VBlankNomDefaultUS);
 		pipes[pipe_cnt].pipe.dest.vblank_nom = max(pipes[pipe_cnt].pipe.dest.vblank_nom, timing->v_sync_width);
-- 
2.39.2

[PATCH 6.1 071/228] jbd2: remove t_checkpoint_io_list

[Greg Kroah-Hartman]

From: Zhang Yi <yi.zhang@huawei.com>

[ Upstream commit be22255360f80d3af789daad00025171a65424a5 ]

Since t_checkpoint_io_list was stop using in jbd2_log_do_checkpoint()
now, it's time to remove the whole t_checkpoint_io_list logic.

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230606135928.434610-3-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 46f881b5b175 ("jbd2: fix a race when checking checkpoint buffer busy")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jbd2/checkpoint.c | 42 ++----------------------------------------
 fs/jbd2/commit.c     |  3 +--
 include/linux/jbd2.h |  6 ------
 3 files changed, 3 insertions(+), 48 deletions(-)

diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c
index c4e0da6db7195..723b4eb112828 100644
--- a/fs/jbd2/checkpoint.c
+++ b/fs/jbd2/checkpoint.c
@@ -27,7 +27,7 @@
  *
  * Called with j_list_lock held.
  */
-static inline void __buffer_unlink_first(struct journal_head *jh)
+static inline void __buffer_unlink(struct journal_head *jh)
 {
 	transaction_t *transaction = jh->b_cp_transaction;
 
@@ -40,23 +40,6 @@ static inline void __buffer_unlink_first(struct journal_head *jh)
 	}
 }
 
-/*
- * Unlink a buffer from a transaction checkpoint(io) list.
- *
- * Called with j_list_lock held.
- */
-static inline void __buffer_unlink(struct journal_head *jh)
-{
-	transaction_t *transaction = jh->b_cp_transaction;
-
-	__buffer_unlink_first(jh);
-	if (transaction->t_checkpoint_io_list == jh) {
-		transaction->t_checkpoint_io_list = jh->b_cpnext;
-		if (transaction->t_checkpoint_io_list == jh)
-			transaction->t_checkpoint_io_list = NULL;
-	}
-}
-
 /*
  * Check a checkpoint buffer could be release or not.
  *
@@ -505,15 +488,6 @@ unsigned long jbd2_journal_shrink_checkpoint_list(journal_t *journal,
 			break;
 		if (need_resched() || spin_needbreak(&journal->j_list_lock))
 			break;
-		if (released)
-			continue;
-
-		nr_freed += journal_shrink_one_cp_list(transaction->t_checkpoint_io_list,
-						       nr_to_scan, &released);
-		if (*nr_to_scan == 0)
-			break;
-		if (need_resched() || spin_needbreak(&journal->j_list_lock))
-			break;
 	} while (transaction != last_transaction);
 
 	if (transaction != last_transaction) {
@@ -568,17 +542,6 @@ void __jbd2_journal_clean_checkpoint_list(journal_t *journal, bool destroy)
 		 */
 		if (need_resched())
 			return;
-		if (ret)
-			continue;
-		/*
-		 * It is essential that we are as careful as in the case of
-		 * t_checkpoint_list with removing the buffer from the list as
-		 * we can possibly see not yet submitted buffers on io_list
-		 */
-		ret = journal_clean_one_cp_list(transaction->
-				t_checkpoint_io_list, destroy);
-		if (need_resched())
-			return;
 		/*
 		 * Stop scanning if we couldn't free the transaction. This
 		 * avoids pointless scanning of transactions which still
@@ -663,7 +626,7 @@ int __jbd2_journal_remove_checkpoint(struct journal_head *jh)
 	jbd2_journal_put_journal_head(jh);
 
 	/* Is this transaction empty? */
-	if (transaction->t_checkpoint_list || transaction->t_checkpoint_io_list)
+	if (transaction->t_checkpoint_list)
 		return 0;
 
 	/*
@@ -755,7 +718,6 @@ void __jbd2_journal_drop_transaction(journal_t *journal, transaction_t *transact
 	J_ASSERT(transaction->t_forget == NULL);
 	J_ASSERT(transaction->t_shadow_list == NULL);
 	J_ASSERT(transaction->t_checkpoint_list == NULL);
-	J_ASSERT(transaction->t_checkpoint_io_list == NULL);
 	J_ASSERT(atomic_read(&transaction->t_updates) == 0);
 	J_ASSERT(journal->j_committing_transaction != transaction);
 	J_ASSERT(journal->j_running_transaction != transaction);
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index 885a7a6cc53e6..f1d9db6686e31 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -1171,8 +1171,7 @@ void jbd2_journal_commit_transaction(journal_t *journal)
 	spin_lock(&journal->j_list_lock);
 	commit_transaction->t_state = T_FINISHED;
 	/* Check if the transaction can be dropped now that we are finished */
-	if (commit_transaction->t_checkpoint_list == NULL &&
-	    commit_transaction->t_checkpoint_io_list == NULL) {
+	if (commit_transaction->t_checkpoint_list == NULL) {
 		__jbd2_journal_drop_transaction(journal, commit_transaction);
 		jbd2_journal_free_transaction(commit_transaction);
 	}
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index 0b7242370b567..67912fe08fbbd 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -622,12 +622,6 @@ struct transaction_s
 	 */
 	struct journal_head	*t_checkpoint_list;
 
-	/*
-	 * Doubly-linked circular list of all buffers submitted for IO while
-	 * checkpointing. [j_list_lock]
-	 */
-	struct journal_head	*t_checkpoint_io_list;
-
 	/*
 	 * Doubly-linked circular list of metadata buffers being
 	 * shadowed by log IO.  The IO buffers on the iobuf list and
-- 
2.39.2

[PATCH 6.1 072/228] jbd2: remove journal_clean_one_cp_list()

[Greg Kroah-Hartman]

From: Zhang Yi <yi.zhang@huawei.com>

[ Upstream commit b98dba273a0e47dbfade89c9af73c5b012a4eabb ]

journal_clean_one_cp_list() and journal_shrink_one_cp_list() are almost
the same, so merge them into journal_shrink_one_cp_list(), remove the
nr_to_scan parameter, always scan and try to free the whole checkpoint
list.

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230606135928.434610-4-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 46f881b5b175 ("jbd2: fix a race when checking checkpoint buffer busy")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jbd2/checkpoint.c        | 75 +++++++++----------------------------
 include/trace/events/jbd2.h | 12 ++----
 2 files changed, 21 insertions(+), 66 deletions(-)

diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c
index 723b4eb112828..42b34cab64fbd 100644
--- a/fs/jbd2/checkpoint.c
+++ b/fs/jbd2/checkpoint.c
@@ -349,50 +349,10 @@ int jbd2_cleanup_journal_tail(journal_t *journal)
 
 /* Checkpoint list management */
 
-/*
- * journal_clean_one_cp_list
- *
- * Find all the written-back checkpoint buffers in the given list and
- * release them. If 'destroy' is set, clean all buffers unconditionally.
- *
- * Called with j_list_lock held.
- * Returns 1 if we freed the transaction, 0 otherwise.
- */
-static int journal_clean_one_cp_list(struct journal_head *jh, bool destroy)
-{
-	struct journal_head *last_jh;
-	struct journal_head *next_jh = jh;
-
-	if (!jh)
-		return 0;
-
-	last_jh = jh->b_cpprev;
-	do {
-		jh = next_jh;
-		next_jh = jh->b_cpnext;
-
-		if (!destroy && __cp_buffer_busy(jh))
-			return 0;
-
-		if (__jbd2_journal_remove_checkpoint(jh))
-			return 1;
-		/*
-		 * This function only frees up some memory
-		 * if possible so we dont have an obligation
-		 * to finish processing. Bail out if preemption
-		 * requested:
-		 */
-		if (need_resched())
-			return 0;
-	} while (jh != last_jh);
-
-	return 0;
-}
-
 /*
  * journal_shrink_one_cp_list
  *
- * Find 'nr_to_scan' written-back checkpoint buffers in the given list
+ * Find all the written-back checkpoint buffers in the given list
  * and try to release them. If the whole transaction is released, set
  * the 'released' parameter. Return the number of released checkpointed
  * buffers.
@@ -400,15 +360,15 @@ static int journal_clean_one_cp_list(struct journal_head *jh, bool destroy)
  * Called with j_list_lock held.
  */
 static unsigned long journal_shrink_one_cp_list(struct journal_head *jh,
-						unsigned long *nr_to_scan,
-						bool *released)
+						bool destroy, bool *released)
 {
 	struct journal_head *last_jh;
 	struct journal_head *next_jh = jh;
 	unsigned long nr_freed = 0;
 	int ret;
 
-	if (!jh || *nr_to_scan == 0)
+	*released = false;
+	if (!jh)
 		return 0;
 
 	last_jh = jh->b_cpprev;
@@ -416,8 +376,7 @@ static unsigned long journal_shrink_one_cp_list(struct journal_head *jh,
 		jh = next_jh;
 		next_jh = jh->b_cpnext;
 
-		(*nr_to_scan)--;
-		if (__cp_buffer_busy(jh))
+		if (!destroy && __cp_buffer_busy(jh))
 			continue;
 
 		nr_freed++;
@@ -429,7 +388,7 @@ static unsigned long journal_shrink_one_cp_list(struct journal_head *jh,
 
 		if (need_resched())
 			break;
-	} while (jh != last_jh && *nr_to_scan);
+	} while (jh != last_jh);
 
 	return nr_freed;
 }
@@ -447,11 +406,11 @@ unsigned long jbd2_journal_shrink_checkpoint_list(journal_t *journal,
 						  unsigned long *nr_to_scan)
 {
 	transaction_t *transaction, *last_transaction, *next_transaction;
-	bool released;
+	bool __maybe_unused released;
 	tid_t first_tid = 0, last_tid = 0, next_tid = 0;
 	tid_t tid = 0;
 	unsigned long nr_freed = 0;
-	unsigned long nr_scanned = *nr_to_scan;
+	unsigned long freed;
 
 again:
 	spin_lock(&journal->j_list_lock);
@@ -480,10 +439,11 @@ unsigned long jbd2_journal_shrink_checkpoint_list(journal_t *journal,
 		transaction = next_transaction;
 		next_transaction = transaction->t_cpnext;
 		tid = transaction->t_tid;
-		released = false;
 
-		nr_freed += journal_shrink_one_cp_list(transaction->t_checkpoint_list,
-						       nr_to_scan, &released);
+		freed = journal_shrink_one_cp_list(transaction->t_checkpoint_list,
+						   false, &released);
+		nr_freed += freed;
+		(*nr_to_scan) -= min(*nr_to_scan, freed);
 		if (*nr_to_scan == 0)
 			break;
 		if (need_resched() || spin_needbreak(&journal->j_list_lock))
@@ -504,9 +464,8 @@ unsigned long jbd2_journal_shrink_checkpoint_list(journal_t *journal,
 	if (*nr_to_scan && next_tid)
 		goto again;
 out:
-	nr_scanned -= *nr_to_scan;
 	trace_jbd2_shrink_checkpoint_list(journal, first_tid, tid, last_tid,
-					  nr_freed, nr_scanned, next_tid);
+					  nr_freed, next_tid);
 
 	return nr_freed;
 }
@@ -522,7 +481,7 @@ unsigned long jbd2_journal_shrink_checkpoint_list(journal_t *journal,
 void __jbd2_journal_clean_checkpoint_list(journal_t *journal, bool destroy)
 {
 	transaction_t *transaction, *last_transaction, *next_transaction;
-	int ret;
+	bool released;
 
 	transaction = journal->j_checkpoint_transactions;
 	if (!transaction)
@@ -533,8 +492,8 @@ void __jbd2_journal_clean_checkpoint_list(journal_t *journal, bool destroy)
 	do {
 		transaction = next_transaction;
 		next_transaction = transaction->t_cpnext;
-		ret = journal_clean_one_cp_list(transaction->t_checkpoint_list,
-						destroy);
+		journal_shrink_one_cp_list(transaction->t_checkpoint_list,
+					   destroy, &released);
 		/*
 		 * This function only frees up some memory if possible so we
 		 * dont have an obligation to finish processing. Bail out if
@@ -547,7 +506,7 @@ void __jbd2_journal_clean_checkpoint_list(journal_t *journal, bool destroy)
 		 * avoids pointless scanning of transactions which still
 		 * weren't checkpointed.
 		 */
-		if (!ret)
+		if (!released)
 			return;
 	} while (transaction != last_transaction);
 }
diff --git a/include/trace/events/jbd2.h b/include/trace/events/jbd2.h
index 8f5ee380d3093..5646ae15a957a 100644
--- a/include/trace/events/jbd2.h
+++ b/include/trace/events/jbd2.h
@@ -462,11 +462,9 @@ TRACE_EVENT(jbd2_shrink_scan_exit,
 TRACE_EVENT(jbd2_shrink_checkpoint_list,
 
 	TP_PROTO(journal_t *journal, tid_t first_tid, tid_t tid, tid_t last_tid,
-		 unsigned long nr_freed, unsigned long nr_scanned,
-		 tid_t next_tid),
+		 unsigned long nr_freed, tid_t next_tid),
 
-	TP_ARGS(journal, first_tid, tid, last_tid, nr_freed,
-		nr_scanned, next_tid),
+	TP_ARGS(journal, first_tid, tid, last_tid, nr_freed, next_tid),
 
 	TP_STRUCT__entry(
 		__field(dev_t, dev)
@@ -474,7 +472,6 @@ TRACE_EVENT(jbd2_shrink_checkpoint_list,
 		__field(tid_t, tid)
 		__field(tid_t, last_tid)
 		__field(unsigned long, nr_freed)
-		__field(unsigned long, nr_scanned)
 		__field(tid_t, next_tid)
 	),
 
@@ -484,15 +481,14 @@ TRACE_EVENT(jbd2_shrink_checkpoint_list,
 		__entry->tid		= tid;
 		__entry->last_tid	= last_tid;
 		__entry->nr_freed	= nr_freed;
-		__entry->nr_scanned	= nr_scanned;
 		__entry->next_tid	= next_tid;
 	),
 
 	TP_printk("dev %d,%d shrink transaction %u-%u(%u) freed %lu "
-		  "scanned %lu next transaction %u",
+		  "next transaction %u",
 		  MAJOR(__entry->dev), MINOR(__entry->dev),
 		  __entry->first_tid, __entry->tid, __entry->last_tid,
-		  __entry->nr_freed, __entry->nr_scanned, __entry->next_tid)
+		  __entry->nr_freed, __entry->next_tid)
 );
 
 #endif /* _TRACE_JBD2_H */
-- 
2.39.2

[PATCH 6.1 073/228] jbd2: fix a race when checking checkpoint buffer busy

[Greg Kroah-Hartman]

From: Zhang Yi <yi.zhang@huawei.com>

[ Upstream commit 46f881b5b1758dc4a35fba4a643c10717d0cf427 ]

Before removing checkpoint buffer from the t_checkpoint_list, we have to
check both BH_Dirty and BH_Lock bits together to distinguish buffers
have not been or were being written back. But __cp_buffer_busy() checks
them separately, it first check lock state and then check dirty, the
window between these two checks could be raced by writing back
procedure, which locks buffer and clears buffer dirty before I/O
completes. So it cannot guarantee checkpointing buffers been written
back to disk if some error happens later. Finally, it may clean
checkpoint transactions and lead to inconsistent filesystem.

jbd2_journal_forget() and __journal_try_to_free_buffer() also have the
same problem (journal_unmap_buffer() escape from this issue since it's
running under the buffer lock), so fix them through introducing a new
helper to try holding the buffer lock and remove really clean buffer.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217490
Cc: stable@vger.kernel.org
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230606135928.434610-6-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jbd2/checkpoint.c  | 38 +++++++++++++++++++++++++++++++++++---
 fs/jbd2/transaction.c | 17 +++++------------
 include/linux/jbd2.h  |  1 +
 3 files changed, 41 insertions(+), 15 deletions(-)

diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c
index 42b34cab64fbd..9ec91017a7f3c 100644
--- a/fs/jbd2/checkpoint.c
+++ b/fs/jbd2/checkpoint.c
@@ -376,11 +376,15 @@ static unsigned long journal_shrink_one_cp_list(struct journal_head *jh,
 		jh = next_jh;
 		next_jh = jh->b_cpnext;
 
-		if (!destroy && __cp_buffer_busy(jh))
-			continue;
+		if (destroy) {
+			ret = __jbd2_journal_remove_checkpoint(jh);
+		} else {
+			ret = jbd2_journal_try_remove_checkpoint(jh);
+			if (ret < 0)
+				continue;
+		}
 
 		nr_freed++;
-		ret = __jbd2_journal_remove_checkpoint(jh);
 		if (ret) {
 			*released = true;
 			break;
@@ -616,6 +620,34 @@ int __jbd2_journal_remove_checkpoint(struct journal_head *jh)
 	return 1;
 }
 
+/*
+ * Check the checkpoint buffer and try to remove it from the checkpoint
+ * list if it's clean. Returns -EBUSY if it is not clean, returns 1 if
+ * it frees the transaction, 0 otherwise.
+ *
+ * This function is called with j_list_lock held.
+ */
+int jbd2_journal_try_remove_checkpoint(struct journal_head *jh)
+{
+	struct buffer_head *bh = jh2bh(jh);
+
+	if (!trylock_buffer(bh))
+		return -EBUSY;
+	if (buffer_dirty(bh)) {
+		unlock_buffer(bh);
+		return -EBUSY;
+	}
+	unlock_buffer(bh);
+
+	/*
+	 * Buffer is clean and the IO has finished (we held the buffer
+	 * lock) so the checkpoint is done. We can safely remove the
+	 * buffer from this transaction.
+	 */
+	JBUFFER_TRACE(jh, "remove from checkpoint list");
+	return __jbd2_journal_remove_checkpoint(jh);
+}
+
 /*
  * journal_insert_checkpoint: put a committed buffer onto a checkpoint
  * list so that we know when it is safe to clean the transaction out of
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index 18611241f4513..6ef5022949c46 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -1784,8 +1784,7 @@ int jbd2_journal_forget(handle_t *handle, struct buffer_head *bh)
 		 * Otherwise, if the buffer has been written to disk,
 		 * it is safe to remove the checkpoint and drop it.
 		 */
-		if (!buffer_dirty(bh)) {
-			__jbd2_journal_remove_checkpoint(jh);
+		if (jbd2_journal_try_remove_checkpoint(jh) >= 0) {
 			spin_unlock(&journal->j_list_lock);
 			goto drop;
 		}
@@ -2112,20 +2111,14 @@ __journal_try_to_free_buffer(journal_t *journal, struct buffer_head *bh)
 
 	jh = bh2jh(bh);
 
-	if (buffer_locked(bh) || buffer_dirty(bh))
-		goto out;
-
 	if (jh->b_next_transaction != NULL || jh->b_transaction != NULL)
-		goto out;
+		return;
 
 	spin_lock(&journal->j_list_lock);
-	if (jh->b_cp_transaction != NULL) {
-		/* written-back checkpointed metadata buffer */
-		JBUFFER_TRACE(jh, "remove from checkpoint list");
-		__jbd2_journal_remove_checkpoint(jh);
-	}
+	/* Remove written-back checkpointed metadata buffer */
+	if (jh->b_cp_transaction != NULL)
+		jbd2_journal_try_remove_checkpoint(jh);
 	spin_unlock(&journal->j_list_lock);
-out:
 	return;
 }
 
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index 67912fe08fbbd..ebb1608d9dcd2 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -1435,6 +1435,7 @@ extern void jbd2_journal_commit_transaction(journal_t *);
 void __jbd2_journal_clean_checkpoint_list(journal_t *journal, bool destroy);
 unsigned long jbd2_journal_shrink_checkpoint_list(journal_t *journal, unsigned long *nr_to_scan);
 int __jbd2_journal_remove_checkpoint(struct journal_head *);
+int jbd2_journal_try_remove_checkpoint(struct journal_head *jh);
 void jbd2_journal_destroy_checkpoint(journal_t *journal);
 void __jbd2_journal_insert_checkpoint(struct journal_head *, transaction_t *);
 
-- 
2.39.2

[PATCH 6.1 074/228] phy: phy-mtk-dp: Fix an error code in probe()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@linaro.org>

[ Upstream commit 5782017cc4d0c8f3425d55b893675bb8a20c33e9 ]

Negative -EINVAL was intended instead of positive EINVAL.

Fixes: 6a23afad443a ("phy: phy-mtk-dp: Add driver for DP phy")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/3c699e00-2883-40d9-92c3-0da1dc38fdd4@moroto.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/mediatek/phy-mtk-dp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/mediatek/phy-mtk-dp.c b/drivers/phy/mediatek/phy-mtk-dp.c
index 232fd3f1ff1b1..d7024a1443358 100644
--- a/drivers/phy/mediatek/phy-mtk-dp.c
+++ b/drivers/phy/mediatek/phy-mtk-dp.c
@@ -169,7 +169,7 @@ static int mtk_dp_phy_probe(struct platform_device *pdev)
 
 	regs = *(struct regmap **)dev->platform_data;
 	if (!regs)
-		return dev_err_probe(dev, EINVAL,
+		return dev_err_probe(dev, -EINVAL,
 				     "No data passed, requires struct regmap**\n");
 
 	dp_phy = devm_kzalloc(dev, sizeof(*dp_phy), GFP_KERNEL);
-- 
2.39.2

[PATCH 6.1 075/228] phy: qcom-snps: correct struct qcom_snps_hsphy kerneldoc

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit 2a881183dc5ab2474ef602e48fe7af34db460d95 ]

Update kerneldoc of struct qcom_snps_hsphy to fix:

  drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c:135: warning: Function parameter or member 'update_seq_cfg' not described in 'qcom_snps_hsphy'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230507144818.193039-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 8a0eb8f9b9a0 ("phy: qcom-snps-femto-v2: properly enable ref clock")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
index a590635962140..6c237f3cc66db 100644
--- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
+++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
@@ -115,11 +115,11 @@ struct phy_override_seq {
  *
  * @cfg_ahb_clk: AHB2PHY interface clock
  * @ref_clk: phy reference clock
- * @iface_clk: phy interface clock
  * @phy_reset: phy reset control
  * @vregs: regulator supplies bulk data
  * @phy_initialized: if PHY has been initialized correctly
  * @mode: contains the current mode the PHY is in
+ * @update_seq_cfg: tuning parameters for phy init
  */
 struct qcom_snps_hsphy {
 	struct phy *phy;
-- 
2.39.2

[PATCH 6.1 076/228] phy: qcom-snps-femto-v2: keep cfg_ahb_clk enabled during runtime suspend

[Greg Kroah-Hartman]

From: Adrien Thierry <athierry@redhat.com>

[ Upstream commit 45d89a344eb46db9dce851c28e14f5e3c635c251 ]

In the dwc3 core, both system and runtime suspend end up calling
dwc3_suspend_common(). From there, what happens for the PHYs depends on
the USB mode and whether the controller is entering system or runtime
suspend.

HOST mode:
  (1) system suspend on a non-wakeup-capable controller

  The [1] if branch is taken. dwc3_core_exit() is called, which ends up
  calling phy_power_off() and phy_exit(). Those two functions decrease the
  PM runtime count at some point, so they will trigger the PHY runtime
  sleep (assuming the count is right).

  (2) runtime suspend / system suspend on a wakeup-capable controller

  The [1] branch is not taken. dwc3_suspend_common() calls
  phy_pm_runtime_put_sync(). Assuming the ref count is right, the PHY
  runtime suspend op is called.

DEVICE mode:
  dwc3_core_exit() is called on both runtime and system sleep
  unless the controller is already runtime suspended.

OTG mode:
  (1) system suspend : dwc3_core_exit() is called

  (2) runtime suspend : do nothing

In host mode, the code seems to make a distinction between 1) runtime
sleep / system sleep for wakeup-capable controller, and 2) system sleep
for non-wakeup-capable controller, where phy_power_off() and phy_exit()
are only called for the latter. This suggests the PHY is not supposed to
be in a fully powered-off state for runtime sleep and system sleep for
wakeup-capable controller.

Moreover, downstream, cfg_ahb_clk only gets disabled for system suspend.
The clocks are disabled by phy->set_suspend() [2] which is only called
in the system sleep path through dwc3_core_exit() [3].

With that in mind, don't disable the clocks during the femto PHY runtime
suspend callback. The clocks will only be disabled during system suspend
for non-wakeup-capable controllers, through dwc3_core_exit().

[1] https://elixir.bootlin.com/linux/v6.4/source/drivers/usb/dwc3/core.c#L1988
[2] https://git.codelinaro.org/clo/la/kernel/msm-5.4/-/blob/LV.AU.1.2.1.r2-05300-gen3meta.0/drivers/usb/phy/phy-msm-snps-hs.c#L524
[3] https://git.codelinaro.org/clo/la/kernel/msm-5.4/-/blob/LV.AU.1.2.1.r2-05300-gen3meta.0/drivers/usb/dwc3/core.c#L1915

Signed-off-by: Adrien Thierry <athierry@redhat.com>
Link: https://lore.kernel.org/r/20230629144542.14906-2-athierry@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 8a0eb8f9b9a0 ("phy: qcom-snps-femto-v2: properly enable ref clock")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
index 6c237f3cc66db..3335480fc395a 100644
--- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
+++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
@@ -165,22 +165,13 @@ static int qcom_snps_hsphy_suspend(struct qcom_snps_hsphy *hsphy)
 					   0, USB2_AUTO_RESUME);
 	}
 
-	clk_disable_unprepare(hsphy->cfg_ahb_clk);
 	return 0;
 }
 
 static int qcom_snps_hsphy_resume(struct qcom_snps_hsphy *hsphy)
 {
-	int ret;
-
 	dev_dbg(&hsphy->phy->dev, "Resume QCOM SNPS PHY, mode\n");
 
-	ret = clk_prepare_enable(hsphy->cfg_ahb_clk);
-	if (ret) {
-		dev_err(&hsphy->phy->dev, "failed to enable cfg ahb clock\n");
-		return ret;
-	}
-
 	return 0;
 }
 
-- 
2.39.2

[PATCH 6.1 077/228] phy: qcom-snps-femto-v2: properly enable ref clock

[Greg Kroah-Hartman]

From: Adrien Thierry <athierry@redhat.com>

[ Upstream commit 8a0eb8f9b9a002291a3934acfd913660b905249e ]

The driver is not enabling the ref clock, which thus gets disabled by
the clk_disable_unused() initcall. This leads to the dwc3 controller
failing to initialize if probed after clk_disable_unused() is called,
for instance when the driver is built as a module.

To fix this, switch to the clk_bulk API to handle both cfg_ahb and ref
clocks at the proper places.

Note that the cfg_ahb clock is currently not used by any device tree
instantiation of the PHY. Work needs to be done separately to fix this.

Link: https://lore.kernel.org/linux-arm-msm/ZEqvy+khHeTkC2hf@fedora/
Fixes: 51e8114f80d0 ("phy: qcom-snps: Add SNPS USB PHY driver for QCOM based SOCs")
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Link: https://lore.kernel.org/r/20230629144542.14906-3-athierry@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 63 ++++++++++++++-----
 1 file changed, 48 insertions(+), 15 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
index 3335480fc395a..6170f8fd118e2 100644
--- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
+++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
@@ -110,11 +110,13 @@ struct phy_override_seq {
 /**
  * struct qcom_snps_hsphy - snps hs phy attributes
  *
+ * @dev: device structure
+ *
  * @phy: generic phy
  * @base: iomapped memory space for snps hs phy
  *
- * @cfg_ahb_clk: AHB2PHY interface clock
- * @ref_clk: phy reference clock
+ * @num_clks: number of clocks
+ * @clks: array of clocks
  * @phy_reset: phy reset control
  * @vregs: regulator supplies bulk data
  * @phy_initialized: if PHY has been initialized correctly
@@ -122,11 +124,13 @@ struct phy_override_seq {
  * @update_seq_cfg: tuning parameters for phy init
  */
 struct qcom_snps_hsphy {
+	struct device *dev;
+
 	struct phy *phy;
 	void __iomem *base;
 
-	struct clk *cfg_ahb_clk;
-	struct clk *ref_clk;
+	int num_clks;
+	struct clk_bulk_data *clks;
 	struct reset_control *phy_reset;
 	struct regulator_bulk_data vregs[SNPS_HS_NUM_VREGS];
 
@@ -135,6 +139,34 @@ struct qcom_snps_hsphy {
 	struct phy_override_seq update_seq_cfg[NUM_HSPHY_TUNING_PARAMS];
 };
 
+static int qcom_snps_hsphy_clk_init(struct qcom_snps_hsphy *hsphy)
+{
+	struct device *dev = hsphy->dev;
+
+	hsphy->num_clks = 2;
+	hsphy->clks = devm_kcalloc(dev, hsphy->num_clks, sizeof(*hsphy->clks), GFP_KERNEL);
+	if (!hsphy->clks)
+		return -ENOMEM;
+
+	/*
+	 * TODO: Currently no device tree instantiation of the PHY is using the clock.
+	 * This needs to be fixed in order for this code to be able to use devm_clk_bulk_get().
+	 */
+	hsphy->clks[0].id = "cfg_ahb";
+	hsphy->clks[0].clk = devm_clk_get_optional(dev, "cfg_ahb");
+	if (IS_ERR(hsphy->clks[0].clk))
+		return dev_err_probe(dev, PTR_ERR(hsphy->clks[0].clk),
+				     "failed to get cfg_ahb clk\n");
+
+	hsphy->clks[1].id = "ref";
+	hsphy->clks[1].clk = devm_clk_get(dev, "ref");
+	if (IS_ERR(hsphy->clks[1].clk))
+		return dev_err_probe(dev, PTR_ERR(hsphy->clks[1].clk),
+				     "failed to get ref clk\n");
+
+	return 0;
+}
+
 static inline void qcom_snps_hsphy_write_mask(void __iomem *base, u32 offset,
 						u32 mask, u32 val)
 {
@@ -365,16 +397,16 @@ static int qcom_snps_hsphy_init(struct phy *phy)
 	if (ret)
 		return ret;
 
-	ret = clk_prepare_enable(hsphy->cfg_ahb_clk);
+	ret = clk_bulk_prepare_enable(hsphy->num_clks, hsphy->clks);
 	if (ret) {
-		dev_err(&phy->dev, "failed to enable cfg ahb clock, %d\n", ret);
+		dev_err(&phy->dev, "failed to enable clocks, %d\n", ret);
 		goto poweroff_phy;
 	}
 
 	ret = reset_control_assert(hsphy->phy_reset);
 	if (ret) {
 		dev_err(&phy->dev, "failed to assert phy_reset, %d\n", ret);
-		goto disable_ahb_clk;
+		goto disable_clks;
 	}
 
 	usleep_range(100, 150);
@@ -382,7 +414,7 @@ static int qcom_snps_hsphy_init(struct phy *phy)
 	ret = reset_control_deassert(hsphy->phy_reset);
 	if (ret) {
 		dev_err(&phy->dev, "failed to de-assert phy_reset, %d\n", ret);
-		goto disable_ahb_clk;
+		goto disable_clks;
 	}
 
 	qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_CFG0,
@@ -439,8 +471,8 @@ static int qcom_snps_hsphy_init(struct phy *phy)
 
 	return 0;
 
-disable_ahb_clk:
-	clk_disable_unprepare(hsphy->cfg_ahb_clk);
+disable_clks:
+	clk_bulk_disable_unprepare(hsphy->num_clks, hsphy->clks);
 poweroff_phy:
 	regulator_bulk_disable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs);
 
@@ -452,7 +484,7 @@ static int qcom_snps_hsphy_exit(struct phy *phy)
 	struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy);
 
 	reset_control_assert(hsphy->phy_reset);
-	clk_disable_unprepare(hsphy->cfg_ahb_clk);
+	clk_bulk_disable_unprepare(hsphy->num_clks, hsphy->clks);
 	regulator_bulk_disable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs);
 	hsphy->phy_initialized = false;
 
@@ -545,14 +577,15 @@ static int qcom_snps_hsphy_probe(struct platform_device *pdev)
 	if (!hsphy)
 		return -ENOMEM;
 
+	hsphy->dev = dev;
+
 	hsphy->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(hsphy->base))
 		return PTR_ERR(hsphy->base);
 
-	hsphy->ref_clk = devm_clk_get(dev, "ref");
-	if (IS_ERR(hsphy->ref_clk))
-		return dev_err_probe(dev, PTR_ERR(hsphy->ref_clk),
-				     "failed to get ref clk\n");
+	ret = qcom_snps_hsphy_clk_init(hsphy);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to initialize clocks\n");
 
 	hsphy->phy_reset = devm_reset_control_get_exclusive(&pdev->dev, NULL);
 	if (IS_ERR(hsphy->phy_reset)) {
-- 
2.39.2

[PATCH 6.1 078/228] soundwire: qcom: update status correctly with mask

[Greg Kroah-Hartman]

From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

[ Upstream commit f84d41b2a083b990cbdf70f3b24b6b108b9678ad ]

SoundWire device status can be incorrectly updated without
proper mask, fix this by adding a mask before updating the status.

Fixes: c7d49c76d1d5 ("soundwire: qcom: add support to new interrupts")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230525133812.30841-2-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soundwire/qcom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
index 08934d27f709e..a51c8a670d38a 100644
--- a/drivers/soundwire/qcom.c
+++ b/drivers/soundwire/qcom.c
@@ -434,7 +434,7 @@ static int qcom_swrm_get_alert_slave_dev_num(struct qcom_swrm_ctrl *ctrl)
 		status = (val >> (dev_num * SWRM_MCP_SLV_STATUS_SZ));
 
 		if ((status & SWRM_MCP_SLV_STATUS_MASK) == SDW_SLAVE_ALERT) {
-			ctrl->status[dev_num] = status;
+			ctrl->status[dev_num] = status & SWRM_MCP_SLV_STATUS_MASK;
 			return dev_num;
 		}
 	}
-- 
2.39.2

[PATCH 6.1 079/228] media: staging: atomisp: select V4L2_FWNODE

[Greg Kroah-Hartman]

From: Sakari Ailus <sakari.ailus@linux.intel.com>

[ Upstream commit bf4c985707d3168ebb7d87d15830de66949d979c ]

Select V4L2_FWNODE as the driver depends on it.

Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: aa31f6514047 ("media: atomisp: allow building the driver again")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/atomisp/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/staging/media/atomisp/Kconfig b/drivers/staging/media/atomisp/Kconfig
index 2c8d7fdcc5f7a..4881b6ea5237e 100644
--- a/drivers/staging/media/atomisp/Kconfig
+++ b/drivers/staging/media/atomisp/Kconfig
@@ -13,6 +13,7 @@ config VIDEO_ATOMISP
 	tristate "Intel Atom Image Signal Processor Driver"
 	depends on VIDEO_DEV && INTEL_ATOMISP
 	depends on PMIC_OPREGION
+	select V4L2_FWNODE
 	select IOSF_MBI
 	select VIDEOBUF_VMALLOC
 	select VIDEO_V4L2_SUBDEV_API
-- 
2.39.2

[PATCH 6.1 080/228] media: amphion: Fix firmware path to match linux-firmware

[Greg Kroah-Hartman]

From: Nicolas Dufresne <nicolas.dufresne@collabora.com>

[ Upstream commit dcff0b56f661b6b42e828012b464d22cc2068c38 ]

The path did not match the one it was submitted into linux-firmware
which prevented generic distribution from having working CODEC.

Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/amphion/vpu_core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/amphion/vpu_core.c b/drivers/media/platform/amphion/vpu_core.c
index f9ec1753f7c86..be80410682681 100644
--- a/drivers/media/platform/amphion/vpu_core.c
+++ b/drivers/media/platform/amphion/vpu_core.c
@@ -828,7 +828,7 @@ static const struct dev_pm_ops vpu_core_pm_ops = {
 
 static struct vpu_core_resources imx8q_enc = {
 	.type = VPU_CORE_TYPE_ENC,
-	.fwname = "vpu/vpu_fw_imx8_enc.bin",
+	.fwname = "amphion/vpu/vpu_fw_imx8_enc.bin",
 	.stride = 16,
 	.max_width = 1920,
 	.max_height = 1920,
@@ -843,7 +843,7 @@ static struct vpu_core_resources imx8q_enc = {
 
 static struct vpu_core_resources imx8q_dec = {
 	.type = VPU_CORE_TYPE_DEC,
-	.fwname = "vpu/vpu_fw_imx8_dec.bin",
+	.fwname = "amphion/vpu/vpu_fw_imx8_dec.bin",
 	.stride = 256,
 	.max_width = 8188,
 	.max_height = 8188,
-- 
2.39.2

[PATCH 6.1 081/228] i40e: Fix an NULL vs IS_ERR() bug for debugfs_create_dir()

[Greg Kroah-Hartman]

From: Wang Ming <machel@vivo.com>

[ Upstream commit 043b1f185fb0f3939b7427f634787706f45411c4 ]

The debugfs_create_dir() function returns error pointers.
It never returns NULL. Most incorrect error checks were fixed,
but the one in i40e_dbg_init() was forgotten.

Fix the remaining error check.

Fixes: 02e9c290814c ("i40e: debugfs interface")
Signed-off-by: Wang Ming <machel@vivo.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
index 9954493cd4489..62497f5565c59 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
@@ -1839,7 +1839,7 @@ void i40e_dbg_pf_exit(struct i40e_pf *pf)
 void i40e_dbg_init(void)
 {
 	i40e_dbg_root = debugfs_create_dir(i40e_driver_name, NULL);
-	if (!i40e_dbg_root)
+	if (IS_ERR(i40e_dbg_root))
 		pr_info("init of debugfs failed\n");
 }
 
-- 
2.39.2

[PATCH 6.1 082/228] iavf: fix potential deadlock on allocation failure

[Greg Kroah-Hartman]

From: Jacob Keller <jacob.e.keller@intel.com>

[ Upstream commit a2f054c10bef0b54600ec9cb776508443e941343 ]

In iavf_adminq_task(), if kzalloc() fails to allocate the event.msg_buf,
the function will exit without releasing the adapter->crit_lock.

This is unlikely, but if it happens, the next access to that mutex will
deadlock.

Fix this by moving the unlock to the end of the function, and adding a new
label to allow jumping to the unlock portion of the function exit flow.

Fixes: fc2e6b3b132a ("iavf: Rework mutexes for better synchronisation")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/iavf/iavf_main.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c
index c1f91c55e1ca7..650a969a69a14 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_main.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_main.c
@@ -3300,7 +3300,7 @@ static void iavf_adminq_task(struct work_struct *work)
 	event.buf_len = IAVF_MAX_AQ_BUF_SIZE;
 	event.msg_buf = kzalloc(event.buf_len, GFP_KERNEL);
 	if (!event.msg_buf)
-		goto out;
+		goto unlock;
 
 	do {
 		ret = iavf_clean_arq_element(hw, &event, &pending);
@@ -3315,7 +3315,6 @@ static void iavf_adminq_task(struct work_struct *work)
 		if (pending != 0)
 			memset(event.msg_buf, 0, IAVF_MAX_AQ_BUF_SIZE);
 	} while (pending);
-	mutex_unlock(&adapter->crit_lock);
 
 	if (iavf_is_reset_in_progress(adapter))
 		goto freedom;
@@ -3359,6 +3358,8 @@ static void iavf_adminq_task(struct work_struct *work)
 
 freedom:
 	kfree(event.msg_buf);
+unlock:
+	mutex_unlock(&adapter->crit_lock);
 out:
 	/* re-enable Admin queue interrupt cause */
 	iavf_misc_irq_enable(adapter);
-- 
2.39.2

[PATCH 6.1 083/228] iavf: check for removal state before IAVF_FLAG_PF_COMMS_FAILED

[Greg Kroah-Hartman]

From: Jacob Keller <jacob.e.keller@intel.com>

[ Upstream commit 91896c8acce23d33ed078cffd46a9534b1f82be5 ]

In iavf_adminq_task(), if the function can't acquire the
adapter->crit_lock, it checks if the driver is removing. If so, it simply
exits without re-enabling the interrupt. This is done to ensure that the
task stops processing as soon as possible once the driver is being removed.

However, if the IAVF_FLAG_PF_COMMS_FAILED is set, the function checks this
before attempting to acquire the lock. In this case, the function exits
early and re-enables the interrupt. This will happen even if the driver is
already removing.

Avoid this, by moving the check to after the adapter->crit_lock is
acquired. This way, if the driver is removing, we will not re-enable the
interrupt.

Fixes: fc2e6b3b132a ("iavf: Rework mutexes for better synchronisation")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/iavf/iavf_main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c
index 650a969a69a14..22bc57ee24228 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_main.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_main.c
@@ -3286,9 +3286,6 @@ static void iavf_adminq_task(struct work_struct *work)
 	u32 val, oldval;
 	u16 pending;
 
-	if (adapter->flags & IAVF_FLAG_PF_COMMS_FAILED)
-		goto out;
-
 	if (!mutex_trylock(&adapter->crit_lock)) {
 		if (adapter->state == __IAVF_REMOVE)
 			return;
@@ -3297,6 +3294,9 @@ static void iavf_adminq_task(struct work_struct *work)
 		goto out;
 	}
 
+	if (adapter->flags & IAVF_FLAG_PF_COMMS_FAILED)
+		goto unlock;
+
 	event.buf_len = IAVF_MAX_AQ_BUF_SIZE;
 	event.msg_buf = kzalloc(event.buf_len, GFP_KERNEL);
 	if (!event.msg_buf)
-- 
2.39.2

[PATCH 6.1 084/228] net: phy: marvell10g: fix 88x3310 power up

[Greg Kroah-Hartman]

From: Jiawen Wu <jiawenwu@trustnetic.com>

[ Upstream commit c7b75bea853daeb64fc831dbf39a6bbabcc402ac ]

Clear MV_V2_PORT_CTRL_PWRDOWN bit to set power up for 88x3310 PHY,
it sometimes does not take effect immediately. And a read of this
register causes the bit not to clear. This will cause mv3310_reset()
to time out, which will fail the config initialization. So add a delay
before the next access.

Fixes: c9cc1c815d36 ("net: phy: marvell10g: place in powersave mode at probe")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/marvell10g.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 383a9c9f36e54..057d294a273d8 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -328,6 +328,13 @@ static int mv3310_power_up(struct phy_device *phydev)
 	ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL,
 				 MV_V2_PORT_CTRL_PWRDOWN);
 
+	/* Sometimes, the power down bit doesn't clear immediately, and
+	 * a read of this register causes the bit not to clear. Delay
+	 * 100us to allow the PHY to come out of power down mode before
+	 * the next access.
+	 */
+	udelay(100);
+
 	if (phydev->drv->phy_id != MARVELL_PHY_ID_88X3310 ||
 	    priv->firmware_ver < 0x00030000)
 		return ret;
-- 
2.39.2

[PATCH 6.1 085/228] net: hns3: fix the imp capability bit cannot exceed 32 bits issue

[Greg Kroah-Hartman]

From: Hao Lan <lanhao@huawei.com>

[ Upstream commit b27d0232e8897f7c896dc8ad80c9907dd57fd3f3 ]

Current only the first 32 bits of the capability flag bit are considered.
When the matching capability flag bit is greater than 31 bits,
it will get an error bit.This patch use bitmap to solve this issue.
It can handle each capability bit whitout bit width limit.

Fixes: da77aef9cc58 ("net: hns3: create common cmdq resource allocate/free/query APIs")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hnae3.h   |  3 ++-
 .../hns3/hns3_common/hclge_comm_cmd.c         | 21 ++++++++++++++++---
 2 files changed, 20 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
index 17137de9338cf..fcb8b6dc5ab92 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
@@ -31,6 +31,7 @@
 #include <linux/pci.h>
 #include <linux/pkt_sched.h>
 #include <linux/types.h>
+#include <linux/bitmap.h>
 #include <net/pkt_cls.h>
 
 #define HNAE3_MOD_VERSION "1.0"
@@ -402,7 +403,7 @@ struct hnae3_ae_dev {
 	unsigned long hw_err_reset_req;
 	struct hnae3_dev_specs dev_specs;
 	u32 dev_version;
-	unsigned long caps[BITS_TO_LONGS(HNAE3_DEV_CAPS_MAX_NUM)];
+	DECLARE_BITMAP(caps, HNAE3_DEV_CAPS_MAX_NUM);
 	void *priv;
 };
 
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_common/hclge_comm_cmd.c b/drivers/net/ethernet/hisilicon/hns3/hns3_common/hclge_comm_cmd.c
index c797d54f98caa..2ccb0f5460797 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_common/hclge_comm_cmd.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_common/hclge_comm_cmd.c
@@ -170,6 +170,20 @@ static const struct hclge_comm_caps_bit_map hclge_vf_cmd_caps[] = {
 	{HCLGE_COMM_CAP_GRO_B, HNAE3_DEV_SUPPORT_GRO_B},
 };
 
+static void
+hclge_comm_capability_to_bitmap(unsigned long *bitmap, __le32 *caps)
+{
+	const unsigned int words = HCLGE_COMM_QUERY_CAP_LENGTH;
+	u32 val[HCLGE_COMM_QUERY_CAP_LENGTH];
+	unsigned int i;
+
+	for (i = 0; i < words; i++)
+		val[i] = __le32_to_cpu(caps[i]);
+
+	bitmap_from_arr32(bitmap, val,
+			  HCLGE_COMM_QUERY_CAP_LENGTH * BITS_PER_TYPE(u32));
+}
+
 static void
 hclge_comm_parse_capability(struct hnae3_ae_dev *ae_dev, bool is_pf,
 			    struct hclge_comm_query_version_cmd *cmd)
@@ -178,11 +192,12 @@ hclge_comm_parse_capability(struct hnae3_ae_dev *ae_dev, bool is_pf,
 				is_pf ? hclge_pf_cmd_caps : hclge_vf_cmd_caps;
 	u32 size = is_pf ? ARRAY_SIZE(hclge_pf_cmd_caps) :
 				ARRAY_SIZE(hclge_vf_cmd_caps);
-	u32 caps, i;
+	DECLARE_BITMAP(caps, HCLGE_COMM_QUERY_CAP_LENGTH * BITS_PER_TYPE(u32));
+	u32 i;
 
-	caps = __le32_to_cpu(cmd->caps[0]);
+	hclge_comm_capability_to_bitmap(caps, cmd->caps);
 	for (i = 0; i < size; i++)
-		if (hnae3_get_bit(caps, caps_map[i].imp_bit))
+		if (test_bit(caps_map[i].imp_bit, caps))
 			set_bit(caps_map[i].local_bit, ae_dev->caps);
 }
 
-- 
2.39.2

[PATCH 6.1 086/228] net: hns3: fix wrong tc bandwidth weight data issue

[Greg Kroah-Hartman]

From: Jijie Shao <shaojijie@huawei.com>

[ Upstream commit 116d9f732eef634abbd871f2c6f613a5b4677742 ]

Currently, the weight saved by the driver is used as the query result,
which may be different from the actual weight in the register.
Therefore, the register value read from the firmware is used
as the query result

Fixes: 0e32038dc856 ("net: hns3: refactor dump tc of debugfs")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c
index 0ebc21401b7c2..726062e512939 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c
@@ -692,8 +692,7 @@ static int hclge_dbg_dump_tc(struct hclge_dev *hdev, char *buf, int len)
 	for (i = 0; i < HNAE3_MAX_TC; i++) {
 		sch_mode_str = ets_weight->tc_weight[i] ? "dwrr" : "sp";
 		pos += scnprintf(buf + pos, len - pos, "%u     %4s    %3u\n",
-				 i, sch_mode_str,
-				 hdev->tm_info.pg_info[0].tc_dwrr[i]);
+				 i, sch_mode_str, ets_weight->tc_weight[i]);
 	}
 
 	return 0;
-- 
2.39.2

[PATCH 6.1 087/228] net: hns3: fix wrong bw weight of disabled tc issue

[Greg Kroah-Hartman]

From: Jijie Shao <shaojijie@huawei.com>

[ Upstream commit 882481b1c55fc44861d7e2d54b4e0936b1b39f2c ]

In dwrr mode, the default bandwidth weight of disabled tc is set to 0.
If the bandwidth weight is 0, the mode will change to sp.
Therefore, disabled tc default bandwidth weight need changed to 1,
and 0 is returned when query the bandwidth weight of disabled tc.
In addition, driver need stop configure bandwidth weight if tc is disabled.

Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c  | 17 ++++++++++++++---
 .../ethernet/hisilicon/hns3/hns3pf/hclge_tm.c   |  3 ++-
 2 files changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
index c4aded65e848b..09362823140d5 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
@@ -52,7 +52,10 @@ static void hclge_tm_info_to_ieee_ets(struct hclge_dev *hdev,
 
 	for (i = 0; i < HNAE3_MAX_TC; i++) {
 		ets->prio_tc[i] = hdev->tm_info.prio_tc[i];
-		ets->tc_tx_bw[i] = hdev->tm_info.pg_info[0].tc_dwrr[i];
+		if (i < hdev->tm_info.num_tc)
+			ets->tc_tx_bw[i] = hdev->tm_info.pg_info[0].tc_dwrr[i];
+		else
+			ets->tc_tx_bw[i] = 0;
 
 		if (hdev->tm_info.tc_info[i].tc_sch_mode ==
 		    HCLGE_SCH_MODE_SP)
@@ -123,7 +126,8 @@ static u8 hclge_ets_tc_changed(struct hclge_dev *hdev, struct ieee_ets *ets,
 }
 
 static int hclge_ets_sch_mode_validate(struct hclge_dev *hdev,
-				       struct ieee_ets *ets, bool *changed)
+				       struct ieee_ets *ets, bool *changed,
+				       u8 tc_num)
 {
 	bool has_ets_tc = false;
 	u32 total_ets_bw = 0;
@@ -137,6 +141,13 @@ static int hclge_ets_sch_mode_validate(struct hclge_dev *hdev,
 				*changed = true;
 			break;
 		case IEEE_8021QAZ_TSA_ETS:
+			if (i >= tc_num) {
+				dev_err(&hdev->pdev->dev,
+					"tc%u is disabled, cannot set ets bw\n",
+					i);
+				return -EINVAL;
+			}
+
 			/* The hardware will switch to sp mode if bandwidth is
 			 * 0, so limit ets bandwidth must be greater than 0.
 			 */
@@ -176,7 +187,7 @@ static int hclge_ets_validate(struct hclge_dev *hdev, struct ieee_ets *ets,
 	if (ret)
 		return ret;
 
-	ret = hclge_ets_sch_mode_validate(hdev, ets, changed);
+	ret = hclge_ets_sch_mode_validate(hdev, ets, changed, tc_num);
 	if (ret)
 		return ret;
 
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
index 922c0da3660c7..150f146fa24fb 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
@@ -785,6 +785,7 @@ static void hclge_tm_tc_info_init(struct hclge_dev *hdev)
 static void hclge_tm_pg_info_init(struct hclge_dev *hdev)
 {
 #define BW_PERCENT	100
+#define DEFAULT_BW_WEIGHT	1
 
 	u8 i;
 
@@ -806,7 +807,7 @@ static void hclge_tm_pg_info_init(struct hclge_dev *hdev)
 		for (k = 0; k < hdev->tm_info.num_tc; k++)
 			hdev->tm_info.pg_info[i].tc_dwrr[k] = BW_PERCENT;
 		for (; k < HNAE3_MAX_TC; k++)
-			hdev->tm_info.pg_info[i].tc_dwrr[k] = 0;
+			hdev->tm_info.pg_info[i].tc_dwrr[k] = DEFAULT_BW_WEIGHT;
 	}
 }
 
-- 
2.39.2

[PATCH 6.1 088/228] vxlan: calculate correct header length for GPE

[Greg Kroah-Hartman]

From: Jiri Benc <jbenc@redhat.com>

[ Upstream commit 94d166c5318c6edd1e079df8552233443e909c33 ]

VXLAN-GPE does not add an extra inner Ethernet header. Take that into
account when calculating header length.

This causes problems in skb_tunnel_check_pmtu, where incorrect PMTU is
cached.

In the collect_md mode (which is the only mode that VXLAN-GPE
supports), there's no magic auto-setting of the tunnel interface MTU.
It can't be, since the destination and thus the underlying interface
may be different for each packet.

So, the administrator is responsible for setting the correct tunnel
interface MTU. Apparently, the administrators are capable enough to
calculate that the maximum MTU for VXLAN-GPE is (their_lower_MTU - 36).
They set the tunnel interface MTU to 1464. If you run a TCP stream over
such interface, it's then segmented according to the MTU 1464, i.e.
producing 1514 bytes frames. Which is okay, this still fits the lower
MTU.

However, skb_tunnel_check_pmtu (called from vxlan_xmit_one) uses 50 as
the header size and thus incorrectly calculates the frame size to be
1528. This leads to ICMP too big message being generated (locally),
PMTU of 1450 to be cached and the TCP stream to be resegmented.

The fix is to use the correct actual header size, especially for
skb_tunnel_check_pmtu calculation.

Fixes: e1e5314de08ba ("vxlan: implement GPE")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c |  2 +-
 drivers/net/vxlan/vxlan_core.c                | 23 ++++++++-----------
 include/net/vxlan.h                           | 13 +++++++----
 3 files changed, 20 insertions(+), 18 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 9b8848daeb430..6105419ae2d5f 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -8499,7 +8499,7 @@ static void ixgbe_atr(struct ixgbe_ring *ring,
 		struct ixgbe_adapter *adapter = q_vector->adapter;
 
 		if (unlikely(skb_tail_pointer(skb) < hdr.network +
-			     VXLAN_HEADROOM))
+			     vxlan_headroom(0)))
 			return;
 
 		/* verify the port is recognized as VXLAN */
diff --git a/drivers/net/vxlan/vxlan_core.c b/drivers/net/vxlan/vxlan_core.c
index d4be39b19a6be..719f862fa55eb 100644
--- a/drivers/net/vxlan/vxlan_core.c
+++ b/drivers/net/vxlan/vxlan_core.c
@@ -2584,7 +2584,7 @@ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev,
 		}
 
 		ndst = &rt->dst;
-		err = skb_tunnel_check_pmtu(skb, ndst, VXLAN_HEADROOM,
+		err = skb_tunnel_check_pmtu(skb, ndst, vxlan_headroom(flags & VXLAN_F_GPE),
 					    netif_is_any_bridge_port(dev));
 		if (err < 0) {
 			goto tx_error;
@@ -2645,7 +2645,8 @@ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev,
 				goto out_unlock;
 		}
 
-		err = skb_tunnel_check_pmtu(skb, ndst, VXLAN6_HEADROOM,
+		err = skb_tunnel_check_pmtu(skb, ndst,
+					    vxlan_headroom((flags & VXLAN_F_GPE) | VXLAN_F_IPV6),
 					    netif_is_any_bridge_port(dev));
 		if (err < 0) {
 			goto tx_error;
@@ -3034,14 +3035,12 @@ static int vxlan_change_mtu(struct net_device *dev, int new_mtu)
 	struct vxlan_rdst *dst = &vxlan->default_dst;
 	struct net_device *lowerdev = __dev_get_by_index(vxlan->net,
 							 dst->remote_ifindex);
-	bool use_ipv6 = !!(vxlan->cfg.flags & VXLAN_F_IPV6);
 
 	/* This check is different than dev->max_mtu, because it looks at
 	 * the lowerdev->mtu, rather than the static dev->max_mtu
 	 */
 	if (lowerdev) {
-		int max_mtu = lowerdev->mtu -
-			      (use_ipv6 ? VXLAN6_HEADROOM : VXLAN_HEADROOM);
+		int max_mtu = lowerdev->mtu - vxlan_headroom(vxlan->cfg.flags);
 		if (new_mtu > max_mtu)
 			return -EINVAL;
 	}
@@ -3684,11 +3683,11 @@ static void vxlan_config_apply(struct net_device *dev,
 	struct vxlan_dev *vxlan = netdev_priv(dev);
 	struct vxlan_rdst *dst = &vxlan->default_dst;
 	unsigned short needed_headroom = ETH_HLEN;
-	bool use_ipv6 = !!(conf->flags & VXLAN_F_IPV6);
 	int max_mtu = ETH_MAX_MTU;
+	u32 flags = conf->flags;
 
 	if (!changelink) {
-		if (conf->flags & VXLAN_F_GPE)
+		if (flags & VXLAN_F_GPE)
 			vxlan_raw_setup(dev);
 		else
 			vxlan_ether_setup(dev);
@@ -3713,8 +3712,7 @@ static void vxlan_config_apply(struct net_device *dev,
 
 		dev->needed_tailroom = lowerdev->needed_tailroom;
 
-		max_mtu = lowerdev->mtu - (use_ipv6 ? VXLAN6_HEADROOM :
-					   VXLAN_HEADROOM);
+		max_mtu = lowerdev->mtu - vxlan_headroom(flags);
 		if (max_mtu < ETH_MIN_MTU)
 			max_mtu = ETH_MIN_MTU;
 
@@ -3725,10 +3723,9 @@ static void vxlan_config_apply(struct net_device *dev,
 	if (dev->mtu > max_mtu)
 		dev->mtu = max_mtu;
 
-	if (use_ipv6 || conf->flags & VXLAN_F_COLLECT_METADATA)
-		needed_headroom += VXLAN6_HEADROOM;
-	else
-		needed_headroom += VXLAN_HEADROOM;
+	if (flags & VXLAN_F_COLLECT_METADATA)
+		flags |= VXLAN_F_IPV6;
+	needed_headroom += vxlan_headroom(flags);
 	dev->needed_headroom = needed_headroom;
 
 	memcpy(&vxlan->cfg, conf, sizeof(*conf));
diff --git a/include/net/vxlan.h b/include/net/vxlan.h
index bca5b01af2475..03bcc1ef0d61e 100644
--- a/include/net/vxlan.h
+++ b/include/net/vxlan.h
@@ -378,10 +378,15 @@ static inline netdev_features_t vxlan_features_check(struct sk_buff *skb,
 	return features;
 }
 
-/* IP header + UDP + VXLAN + Ethernet header */
-#define VXLAN_HEADROOM (20 + 8 + 8 + 14)
-/* IPv6 header + UDP + VXLAN + Ethernet header */
-#define VXLAN6_HEADROOM (40 + 8 + 8 + 14)
+static inline int vxlan_headroom(u32 flags)
+{
+	/* VXLAN:     IP4/6 header + UDP + VXLAN + Ethernet header */
+	/* VXLAN-GPE: IP4/6 header + UDP + VXLAN */
+	return (flags & VXLAN_F_IPV6 ? sizeof(struct ipv6hdr) :
+				       sizeof(struct iphdr)) +
+	       sizeof(struct udphdr) + sizeof(struct vxlanhdr) +
+	       (flags & VXLAN_F_GPE ? 0 : ETH_HLEN);
+}
 
 static inline struct vxlanhdr *vxlan_hdr(struct sk_buff *skb)
 {
-- 
2.39.2

[PATCH 6.1 089/228] vxlan: generalize vxlan_parse_gpe_hdr and remove unused args

[Greg Kroah-Hartman]

From: Jiri Benc <jbenc@redhat.com>

[ Upstream commit 17a0a64448b568442a101de09575f81ffdc45d15 ]

The vxlan_parse_gpe_hdr function extracts the next protocol value from
the GPE header and marks GPE bits as parsed.

In order to be used in the next patch, split the function into protocol
extraction and bit marking. The bit marking is meaningful only in
vxlan_rcv; move it directly there.

Rename the function to vxlan_parse_gpe_proto to reflect what it now
does. Remove unused arguments skb and vxflags. Move the function earlier
in the file to allow it to be called from more places in the next patch.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: b0b672c4d095 ("vxlan: fix GRO with VXLAN-GPE")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/vxlan/vxlan_core.c | 58 ++++++++++++++++------------------
 1 file changed, 28 insertions(+), 30 deletions(-)

diff --git a/drivers/net/vxlan/vxlan_core.c b/drivers/net/vxlan/vxlan_core.c
index 719f862fa55eb..0dc7326fd6ed4 100644
--- a/drivers/net/vxlan/vxlan_core.c
+++ b/drivers/net/vxlan/vxlan_core.c
@@ -670,6 +670,32 @@ static int vxlan_fdb_append(struct vxlan_fdb *f,
 	return 1;
 }
 
+static bool vxlan_parse_gpe_proto(struct vxlanhdr *hdr, __be16 *protocol)
+{
+	struct vxlanhdr_gpe *gpe = (struct vxlanhdr_gpe *)hdr;
+
+	/* Need to have Next Protocol set for interfaces in GPE mode. */
+	if (!gpe->np_applied)
+		return false;
+	/* "The initial version is 0. If a receiver does not support the
+	 * version indicated it MUST drop the packet.
+	 */
+	if (gpe->version != 0)
+		return false;
+	/* "When the O bit is set to 1, the packet is an OAM packet and OAM
+	 * processing MUST occur." However, we don't implement OAM
+	 * processing, thus drop the packet.
+	 */
+	if (gpe->oam_flag)
+		return false;
+
+	*protocol = tun_p_to_eth_p(gpe->next_protocol);
+	if (!*protocol)
+		return false;
+
+	return true;
+}
+
 static struct vxlanhdr *vxlan_gro_remcsum(struct sk_buff *skb,
 					  unsigned int off,
 					  struct vxlanhdr *vh, size_t hdrlen,
@@ -1572,35 +1598,6 @@ static void vxlan_parse_gbp_hdr(struct vxlanhdr *unparsed,
 	unparsed->vx_flags &= ~VXLAN_GBP_USED_BITS;
 }
 
-static bool vxlan_parse_gpe_hdr(struct vxlanhdr *unparsed,
-				__be16 *protocol,
-				struct sk_buff *skb, u32 vxflags)
-{
-	struct vxlanhdr_gpe *gpe = (struct vxlanhdr_gpe *)unparsed;
-
-	/* Need to have Next Protocol set for interfaces in GPE mode. */
-	if (!gpe->np_applied)
-		return false;
-	/* "The initial version is 0. If a receiver does not support the
-	 * version indicated it MUST drop the packet.
-	 */
-	if (gpe->version != 0)
-		return false;
-	/* "When the O bit is set to 1, the packet is an OAM packet and OAM
-	 * processing MUST occur." However, we don't implement OAM
-	 * processing, thus drop the packet.
-	 */
-	if (gpe->oam_flag)
-		return false;
-
-	*protocol = tun_p_to_eth_p(gpe->next_protocol);
-	if (!*protocol)
-		return false;
-
-	unparsed->vx_flags &= ~VXLAN_GPE_USED_BITS;
-	return true;
-}
-
 static bool vxlan_set_mac(struct vxlan_dev *vxlan,
 			  struct vxlan_sock *vs,
 			  struct sk_buff *skb, __be32 vni)
@@ -1702,8 +1699,9 @@ static int vxlan_rcv(struct sock *sk, struct sk_buff *skb)
 	 * used by VXLAN extensions if explicitly requested.
 	 */
 	if (vs->flags & VXLAN_F_GPE) {
-		if (!vxlan_parse_gpe_hdr(&unparsed, &protocol, skb, vs->flags))
+		if (!vxlan_parse_gpe_proto(&unparsed, &protocol))
 			goto drop;
+		unparsed.vx_flags &= ~VXLAN_GPE_USED_BITS;
 		raw_proto = true;
 	}
 
-- 
2.39.2

[PATCH 6.1 090/228] vxlan: fix GRO with VXLAN-GPE

[Greg Kroah-Hartman]

From: Jiri Benc <jbenc@redhat.com>

[ Upstream commit b0b672c4d0957e5897685667fc848132b8bd2d71 ]

In VXLAN-GPE, there may not be an Ethernet header following the VXLAN
header. But in GRO, the vxlan driver calls eth_gro_receive
unconditionally, which means the following header is incorrectly parsed
as Ethernet.

Introduce GPE specific GRO handling.

For better performance, do not check for GPE during GRO but rather
install a different set of functions at setup time.

Fixes: e1e5314de08ba ("vxlan: implement GPE")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/vxlan/vxlan_core.c | 84 ++++++++++++++++++++++++++++------
 1 file changed, 69 insertions(+), 15 deletions(-)

diff --git a/drivers/net/vxlan/vxlan_core.c b/drivers/net/vxlan/vxlan_core.c
index 0dc7326fd6ed4..0c3eb850fcb79 100644
--- a/drivers/net/vxlan/vxlan_core.c
+++ b/drivers/net/vxlan/vxlan_core.c
@@ -722,26 +722,24 @@ static struct vxlanhdr *vxlan_gro_remcsum(struct sk_buff *skb,
 	return vh;
 }
 
-static struct sk_buff *vxlan_gro_receive(struct sock *sk,
-					 struct list_head *head,
-					 struct sk_buff *skb)
+static struct vxlanhdr *vxlan_gro_prepare_receive(struct sock *sk,
+						  struct list_head *head,
+						  struct sk_buff *skb,
+						  struct gro_remcsum *grc)
 {
-	struct sk_buff *pp = NULL;
 	struct sk_buff *p;
 	struct vxlanhdr *vh, *vh2;
 	unsigned int hlen, off_vx;
-	int flush = 1;
 	struct vxlan_sock *vs = rcu_dereference_sk_user_data(sk);
 	__be32 flags;
-	struct gro_remcsum grc;
 
-	skb_gro_remcsum_init(&grc);
+	skb_gro_remcsum_init(grc);
 
 	off_vx = skb_gro_offset(skb);
 	hlen = off_vx + sizeof(*vh);
 	vh = skb_gro_header(skb, hlen, off_vx);
 	if (unlikely(!vh))
-		goto out;
+		return NULL;
 
 	skb_gro_postpull_rcsum(skb, vh, sizeof(struct vxlanhdr));
 
@@ -749,12 +747,12 @@ static struct sk_buff *vxlan_gro_receive(struct sock *sk,
 
 	if ((flags & VXLAN_HF_RCO) && (vs->flags & VXLAN_F_REMCSUM_RX)) {
 		vh = vxlan_gro_remcsum(skb, off_vx, vh, sizeof(struct vxlanhdr),
-				       vh->vx_vni, &grc,
+				       vh->vx_vni, grc,
 				       !!(vs->flags &
 					  VXLAN_F_REMCSUM_NOPARTIAL));
 
 		if (!vh)
-			goto out;
+			return NULL;
 	}
 
 	skb_gro_pull(skb, sizeof(struct vxlanhdr)); /* pull vxlan header */
@@ -771,12 +769,48 @@ static struct sk_buff *vxlan_gro_receive(struct sock *sk,
 		}
 	}
 
-	pp = call_gro_receive(eth_gro_receive, head, skb);
-	flush = 0;
+	return vh;
+}
+
+static struct sk_buff *vxlan_gro_receive(struct sock *sk,
+					 struct list_head *head,
+					 struct sk_buff *skb)
+{
+	struct sk_buff *pp = NULL;
+	struct gro_remcsum grc;
+	int flush = 1;
 
-out:
+	if (vxlan_gro_prepare_receive(sk, head, skb, &grc)) {
+		pp = call_gro_receive(eth_gro_receive, head, skb);
+		flush = 0;
+	}
 	skb_gro_flush_final_remcsum(skb, pp, flush, &grc);
+	return pp;
+}
 
+static struct sk_buff *vxlan_gpe_gro_receive(struct sock *sk,
+					     struct list_head *head,
+					     struct sk_buff *skb)
+{
+	const struct packet_offload *ptype;
+	struct sk_buff *pp = NULL;
+	struct gro_remcsum grc;
+	struct vxlanhdr *vh;
+	__be16 protocol;
+	int flush = 1;
+
+	vh = vxlan_gro_prepare_receive(sk, head, skb, &grc);
+	if (vh) {
+		if (!vxlan_parse_gpe_proto(vh, &protocol))
+			goto out;
+		ptype = gro_find_receive_by_type(protocol);
+		if (!ptype)
+			goto out;
+		pp = call_gro_receive(ptype->callbacks.gro_receive, head, skb);
+		flush = 0;
+	}
+out:
+	skb_gro_flush_final_remcsum(skb, pp, flush, &grc);
 	return pp;
 }
 
@@ -788,6 +822,21 @@ static int vxlan_gro_complete(struct sock *sk, struct sk_buff *skb, int nhoff)
 	return eth_gro_complete(skb, nhoff + sizeof(struct vxlanhdr));
 }
 
+static int vxlan_gpe_gro_complete(struct sock *sk, struct sk_buff *skb, int nhoff)
+{
+	struct vxlanhdr *vh = (struct vxlanhdr *)(skb->data + nhoff);
+	const struct packet_offload *ptype;
+	int err = -ENOSYS;
+	__be16 protocol;
+
+	if (!vxlan_parse_gpe_proto(vh, &protocol))
+		return err;
+	ptype = gro_find_complete_by_type(protocol);
+	if (ptype)
+		err = ptype->callbacks.gro_complete(skb, nhoff + sizeof(struct vxlanhdr));
+	return err;
+}
+
 static struct vxlan_fdb *vxlan_fdb_alloc(struct vxlan_dev *vxlan, const u8 *mac,
 					 __u16 state, __be32 src_vni,
 					 __u16 ndm_flags)
@@ -3416,8 +3465,13 @@ static struct vxlan_sock *vxlan_socket_create(struct net *net, bool ipv6,
 	tunnel_cfg.encap_rcv = vxlan_rcv;
 	tunnel_cfg.encap_err_lookup = vxlan_err_lookup;
 	tunnel_cfg.encap_destroy = NULL;
-	tunnel_cfg.gro_receive = vxlan_gro_receive;
-	tunnel_cfg.gro_complete = vxlan_gro_complete;
+	if (vs->flags & VXLAN_F_GPE) {
+		tunnel_cfg.gro_receive = vxlan_gpe_gro_receive;
+		tunnel_cfg.gro_complete = vxlan_gpe_gro_complete;
+	} else {
+		tunnel_cfg.gro_receive = vxlan_gro_receive;
+		tunnel_cfg.gro_complete = vxlan_gro_complete;
+	}
 
 	setup_udp_tunnel_sock(net, sock, &tunnel_cfg);
 
-- 
2.39.2

[PATCH 6.1 091/228] phy: hisilicon: Fix an out of bounds check in hisi_inno_phy_probe()

[Greg Kroah-Hartman]

From: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>

[ Upstream commit 13c088cf3657d70893d75cf116be937f1509cc0f ]

The size of array 'priv->ports[]' is INNO_PHY_PORT_NUM.

In the for loop, 'i' is used as the index for array 'priv->ports[]'
with a check (i > INNO_PHY_PORT_NUM) which indicates that
INNO_PHY_PORT_NUM is allowed value for 'i' in the same loop.

This > comparison needs to be changed to >=, otherwise it potentially leads
to an out of bounds write on the next iteration through the loop

Fixes: ba8b0ee81fbb ("phy: add inno-usb2-phy driver for hi3798cv200 SoC")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20230721090558.3588613-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/hisilicon/phy-hisi-inno-usb2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/hisilicon/phy-hisi-inno-usb2.c b/drivers/phy/hisilicon/phy-hisi-inno-usb2.c
index b133ae06757ab..a922fb11a1092 100644
--- a/drivers/phy/hisilicon/phy-hisi-inno-usb2.c
+++ b/drivers/phy/hisilicon/phy-hisi-inno-usb2.c
@@ -158,7 +158,7 @@ static int hisi_inno_phy_probe(struct platform_device *pdev)
 		phy_set_drvdata(phy, &priv->ports[i]);
 		i++;
 
-		if (i > INNO_PHY_PORT_NUM) {
+		if (i >= INNO_PHY_PORT_NUM) {
 			dev_warn(dev, "Support %d ports in maximum\n", i);
 			of_node_put(child);
 			break;
-- 
2.39.2

[PATCH 6.1 092/228] atheros: fix return value check in atl1_tso()

[Greg Kroah-Hartman]

From: Yuanjun Gong <ruc_gongyuanjun@163.com>

[ Upstream commit ed96824b71ed67664390890441b229423a25317f ]

in atl1_tso(), it should check the return value of pskb_trim(),
and return an error code if an unexpected value is returned
by pskb_trim().

Fixes: 401c0aabec4b ("atl1: simplify tx packet descriptor")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Link: https://lore.kernel.org/r/20230722142511.12448-1-ruc_gongyuanjun@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/atheros/atlx/atl1.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/atheros/atlx/atl1.c b/drivers/net/ethernet/atheros/atlx/atl1.c
index c8444bcdf5270..02aa6fd8ebc2d 100644
--- a/drivers/net/ethernet/atheros/atlx/atl1.c
+++ b/drivers/net/ethernet/atheros/atlx/atl1.c
@@ -2113,8 +2113,11 @@ static int atl1_tso(struct atl1_adapter *adapter, struct sk_buff *skb,
 
 			real_len = (((unsigned char *)iph - skb->data) +
 				ntohs(iph->tot_len));
-			if (real_len < skb->len)
-				pskb_trim(skb, real_len);
+			if (real_len < skb->len) {
+				err = pskb_trim(skb, real_len);
+				if (err)
+					return err;
+			}
 			hdr_len = skb_tcp_all_headers(skb);
 			if (skb->len == hdr_len) {
 				iph->check = 0;
-- 
2.39.2

[PATCH 6.1 093/228] ethernet: atheros: fix return value check in atl1e_tso_csum()

[Greg Kroah-Hartman]

From: Yuanjun Gong <ruc_gongyuanjun@163.com>

[ Upstream commit 69a184f7a372aac588babfb0bd681aaed9779f5b ]

in atl1e_tso_csum, it should check the return value of pskb_trim(),
and return an error code if an unexpected value is returned
by pskb_trim().

Fixes: a6a5325239c2 ("atl1e: Atheros L1E Gigabit Ethernet driver")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230720144219.39285-1-ruc_gongyuanjun@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/atheros/atl1e/atl1e_main.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
index 5db0f3495a32e..5935be190b9e2 100644
--- a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
+++ b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
@@ -1641,8 +1641,11 @@ static int atl1e_tso_csum(struct atl1e_adapter *adapter,
 			real_len = (((unsigned char *)ip_hdr(skb) - skb->data)
 					+ ntohs(ip_hdr(skb)->tot_len));
 
-			if (real_len < skb->len)
-				pskb_trim(skb, real_len);
+			if (real_len < skb->len) {
+				err = pskb_trim(skb, real_len);
+				if (err)
+					return err;
+			}
 
 			hdr_len = skb_tcp_all_headers(skb);
 			if (unlikely(skb->len == hdr_len)) {
-- 
2.39.2

[PATCH 6.1 094/228] ipv6 addrconf: fix bug where deleting a mngtmpaddr can create a new temporary address

[Greg Kroah-Hartman]

From: Maciej Żenczykowski <maze@google.com>

[ Upstream commit 69172f0bcb6a09110c5d2a6d792627f5095a9018 ]

currently on 6.4 net/main:

  # ip link add dummy1 type dummy
  # echo 1 > /proc/sys/net/ipv6/conf/dummy1/use_tempaddr
  # ip link set dummy1 up
  # ip -6 addr add 2000::1/64 mngtmpaddr dev dummy1
  # ip -6 addr show dev dummy1

  11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
      inet6 2000::44f3:581c:8ca:3983/64 scope global temporary dynamic
         valid_lft 604800sec preferred_lft 86172sec
      inet6 2000::1/64 scope global mngtmpaddr
         valid_lft forever preferred_lft forever
      inet6 fe80::e8a8:a6ff:fed5:56d4/64 scope link
         valid_lft forever preferred_lft forever

  # ip -6 addr del 2000::44f3:581c:8ca:3983/64 dev dummy1

  (can wait a few seconds if you want to, the above delete isn't [directly] the problem)

  # ip -6 addr show dev dummy1

  11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
      inet6 2000::1/64 scope global mngtmpaddr
         valid_lft forever preferred_lft forever
      inet6 fe80::e8a8:a6ff:fed5:56d4/64 scope link
         valid_lft forever preferred_lft forever

  # ip -6 addr del 2000::1/64 mngtmpaddr dev dummy1
  # ip -6 addr show dev dummy1

  11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
      inet6 2000::81c9:56b7:f51a:b98f/64 scope global temporary dynamic
         valid_lft 604797sec preferred_lft 86169sec
      inet6 fe80::e8a8:a6ff:fed5:56d4/64 scope link
         valid_lft forever preferred_lft forever

This patch prevents this new 'global temporary dynamic' address from being
created by the deletion of the related (same subnet prefix) 'mngtmpaddr'
(which is triggered by there already being no temporary addresses).

Cc: Jiri Pirko <jiri@resnulli.us>
Fixes: 53bd67491537 ("ipv6 addrconf: introduce IFA_F_MANAGETEMPADDR to tell kernel to manage temporary addresses")
Reported-by: Xiao Ma <xiaom@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230720160022.1887942-1-maze@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/addrconf.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 51bfc74805ecf..48a6486951cd6 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -2561,12 +2561,18 @@ static void manage_tempaddrs(struct inet6_dev *idev,
 			ipv6_ifa_notify(0, ift);
 	}
 
-	if ((create || list_empty(&idev->tempaddr_list)) &&
-	    idev->cnf.use_tempaddr > 0) {
+	/* Also create a temporary address if it's enabled but no temporary
+	 * address currently exists.
+	 * However, we get called with valid_lft == 0, prefered_lft == 0, create == false
+	 * as part of cleanup (ie. deleting the mngtmpaddr).
+	 * We don't want that to result in creating a new temporary ip address.
+	 */
+	if (list_empty(&idev->tempaddr_list) && (valid_lft || prefered_lft))
+		create = true;
+
+	if (create && idev->cnf.use_tempaddr > 0) {
 		/* When a new public address is created as described
 		 * in [ADDRCONF], also create a new temporary address.
-		 * Also create a temporary address if it's enabled but
-		 * no temporary address currently exists.
 		 */
 		read_unlock_bh(&idev->lock);
 		ipv6_create_tempaddr(ifp, false);
-- 
2.39.2

[PATCH 6.1 095/228] tcp: Reduce chance of collisions in inet6_hashfn().

[Greg Kroah-Hartman]

From: Stewart Smith <trawets@amazon.com>

[ Upstream commit d11b0df7ddf1831f3e170972f43186dad520bfcc ]

For both IPv4 and IPv6 incoming TCP connections are tracked in a hash
table with a hash over the source & destination addresses and ports.
However, the IPv6 hash is insufficient and can lead to a high rate of
collisions.

The IPv6 hash used an XOR to fit everything into the 96 bits for the
fast jenkins hash, meaning it is possible for an external entity to
ensure the hash collides, thus falling back to a linear search in the
bucket, which is slow.

We take the approach of hash the full length of IPv6 address in
__ipv6_addr_jhash() so that all users can benefit from a more secure
version.

While this may look like it adds overhead, the reality of modern CPUs
means that this is unmeasurable in real world scenarios.

In simulating with llvm-mca, the increase in cycles for the hashing
code was ~16 cycles on Skylake (from a base of ~155), and an extra ~9
on Nehalem (base of ~173).

In commit dd6d2910c5e0 ("netfilter: conntrack: switch to siphash")
netfilter switched from a jenkins hash to a siphash, but even the faster
hsiphash is a more significant overhead (~20-30%) in some preliminary
testing.  So, in this patch, we keep to the more conservative approach to
ensure we don't add much overhead per SYN.

In testing, this results in a consistently even spread across the
connection buckets.  In both testing and real-world scenarios, we have
not found any measurable performance impact.

Fixes: 08dcdbf6a7b9 ("ipv6: use a stronger hash for tcp")
Signed-off-by: Stewart Smith <trawets@amazon.com>
Signed-off-by: Samuel Mendoza-Jonas <samjonas@amazon.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230721222410.17914-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/ipv6.h | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/include/net/ipv6.h b/include/net/ipv6.h
index d383c895592a9..e4ceef687c1c2 100644
--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -718,12 +718,8 @@ static inline u32 ipv6_addr_hash(const struct in6_addr *a)
 /* more secured version of ipv6_addr_hash() */
 static inline u32 __ipv6_addr_jhash(const struct in6_addr *a, const u32 initval)
 {
-	u32 v = (__force u32)a->s6_addr32[0] ^ (__force u32)a->s6_addr32[1];
-
-	return jhash_3words(v,
-			    (__force u32)a->s6_addr32[2],
-			    (__force u32)a->s6_addr32[3],
-			    initval);
+	return jhash2((__force const u32 *)a->s6_addr32,
+		      ARRAY_SIZE(a->s6_addr32), initval);
 }
 
 static inline bool ipv6_addr_loopback(const struct in6_addr *a)
-- 
2.39.2

[PATCH 6.1 096/228] ice: Fix memory management in ice_ethtool_fdir.c

[Greg Kroah-Hartman]

From: Jedrzej Jagielski <jedrzej.jagielski@intel.com>

[ Upstream commit a3336056504d780590ac6d6ac94fbba829994594 ]

Fix ethtool FDIR logic to not use memory after its release.
In the ice_ethtool_fdir.c file there are 2 spots where code can
refer to pointers which may be missing.

In the ice_cfg_fdir_xtrct_seq() function seg may be freed but
even then may be still used by memcpy(&tun_seg[1], seg, sizeof(*seg)).

In the ice_add_fdir_ethtool() function struct ice_fdir_fltr *input
may first fail to be added via ice_fdir_update_list_entry() but then
may be deleted by ice_fdir_update_list_entry.

Terminate in both cases when the returned value of the previous
operation is other than 0, free memory and don't use it anymore.

Reported-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2208423
Fixes: cac2a27cd9ab ("ice: Support IPv4 Flow Director filters")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230721155854.1292805-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/intel/ice/ice_ethtool_fdir.c | 26 ++++++++++---------
 1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool_fdir.c b/drivers/net/ethernet/intel/ice/ice_ethtool_fdir.c
index ead6d50fc0adc..8c6e13f87b7d3 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool_fdir.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool_fdir.c
@@ -1281,16 +1281,21 @@ ice_cfg_fdir_xtrct_seq(struct ice_pf *pf, struct ethtool_rx_flow_spec *fsp,
 				     ICE_FLOW_FLD_OFF_INVAL);
 	}
 
-	/* add filter for outer headers */
 	fltr_idx = ice_ethtool_flow_to_fltr(fsp->flow_type & ~FLOW_EXT);
+
+	assign_bit(fltr_idx, hw->fdir_perfect_fltr, perfect_filter);
+
+	/* add filter for outer headers */
 	ret = ice_fdir_set_hw_fltr_rule(pf, seg, fltr_idx,
 					ICE_FD_HW_SEG_NON_TUN);
-	if (ret == -EEXIST)
-		/* Rule already exists, free memory and continue */
-		devm_kfree(dev, seg);
-	else if (ret)
+	if (ret == -EEXIST) {
+		/* Rule already exists, free memory and count as success */
+		ret = 0;
+		goto err_exit;
+	} else if (ret) {
 		/* could not write filter, free memory */
 		goto err_exit;
+	}
 
 	/* make tunneled filter HW entries if possible */
 	memcpy(&tun_seg[1], seg, sizeof(*seg));
@@ -1305,18 +1310,13 @@ ice_cfg_fdir_xtrct_seq(struct ice_pf *pf, struct ethtool_rx_flow_spec *fsp,
 		devm_kfree(dev, tun_seg);
 	}
 
-	if (perfect_filter)
-		set_bit(fltr_idx, hw->fdir_perfect_fltr);
-	else
-		clear_bit(fltr_idx, hw->fdir_perfect_fltr);
-
 	return ret;
 
 err_exit:
 	devm_kfree(dev, tun_seg);
 	devm_kfree(dev, seg);
 
-	return -EOPNOTSUPP;
+	return ret;
 }
 
 /**
@@ -1914,7 +1914,9 @@ int ice_add_fdir_ethtool(struct ice_vsi *vsi, struct ethtool_rxnfc *cmd)
 	input->comp_report = ICE_FXD_FLTR_QW0_COMP_REPORT_SW_FAIL;
 
 	/* input struct is added to the HW filter list */
-	ice_fdir_update_list_entry(pf, input, fsp->location);
+	ret = ice_fdir_update_list_entry(pf, input, fsp->location);
+	if (ret)
+		goto release_lock;
 
 	ret = ice_fdir_write_all_fltr(pf, input, true);
 	if (ret)
-- 
2.39.2

[PATCH 6.1 097/228] bonding: reset bonds flags when down link is P2P device

[Greg Kroah-Hartman]

From: Hangbin Liu <liuhangbin@gmail.com>

[ Upstream commit da19a2b967cf1e2c426f50d28550d1915214a81d ]

When adding a point to point downlink to the bond, we neglected to reset
the bond's flags, which were still using flags like BROADCAST and
MULTICAST. Consequently, this would initiate ARP/DAD for P2P downlink
interfaces, such as when adding a GRE device to the bonding.

To address this issue, let's reset the bond's flags for P2P interfaces.

Before fix:
7: gre0@NONE: <POINTOPOINT,NOARP,SLAVE,UP,LOWER_UP> mtu 1500 qdisc noqueue master bond0 state UNKNOWN group default qlen 1000
    link/gre6 2006:70:10::1 peer 2006:70:10::2 permaddr 167f:18:f188::
8: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/gre6 2006:70:10::1 brd 2006:70:10::2
    inet6 fe80::200:ff:fe00:0/64 scope link
       valid_lft forever preferred_lft forever

After fix:
7: gre0@NONE: <POINTOPOINT,NOARP,SLAVE,UP,LOWER_UP> mtu 1500 qdisc noqueue master bond2 state UNKNOWN group default qlen 1000
    link/gre6 2006:70:10::1 peer 2006:70:10::2 permaddr c29e:557a:e9d9::
8: bond0: <POINTOPOINT,NOARP,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/gre6 2006:70:10::1 peer 2006:70:10::2
    inet6 fe80::1/64 scope link
       valid_lft forever preferred_lft forever

Reported-by: Liang Li <liali@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2221438
Fixes: 872254dd6b1f ("net/bonding: Enable bonding to enslave non ARPHRD_ETHER")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/bonding/bond_main.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 91d84df91123b..576370f89c755 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1512,6 +1512,11 @@ static void bond_setup_by_slave(struct net_device *bond_dev,
 
 	memcpy(bond_dev->broadcast, slave_dev->broadcast,
 		slave_dev->addr_len);
+
+	if (slave_dev->flags & IFF_POINTOPOINT) {
+		bond_dev->flags &= ~(IFF_BROADCAST | IFF_MULTICAST);
+		bond_dev->flags |= (IFF_POINTOPOINT | IFF_NOARP);
+	}
 }
 
 /* On bonding slaves other than the currently active slave, suppress
-- 
2.39.2

[PATCH 6.1 098/228] team: reset teams flags when down link is P2P device

[Greg Kroah-Hartman]

From: Hangbin Liu <liuhangbin@gmail.com>

[ Upstream commit fa532bee17d15acf8bba4bc8e2062b7a093ba801 ]

When adding a point to point downlink to team device, we neglected to reset
the team's flags, which were still using flags like BROADCAST and
MULTICAST. Consequently, this would initiate ARP/DAD for P2P downlink
interfaces, such as when adding a GRE device to team device. Fix this by
remove multicast/broadcast flags and add p2p and noarp flags.

After removing the none ethernet interface and adding an ethernet interface
to team, we need to reset team interface flags. Unlike bonding interface,
team do not need restore IFF_MASTER, IFF_SLAVE flags.

Reported-by: Liang Li <liali@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2221438
Fixes: 1d76efe1577b ("team: add support for non-ethernet devices")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/team/team.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c
index b524bd374d685..509ba706781ed 100644
--- a/drivers/net/team/team.c
+++ b/drivers/net/team/team.c
@@ -2135,6 +2135,15 @@ static void team_setup_by_port(struct net_device *dev,
 	dev->mtu = port_dev->mtu;
 	memcpy(dev->broadcast, port_dev->broadcast, port_dev->addr_len);
 	eth_hw_addr_inherit(dev, port_dev);
+
+	if (port_dev->flags & IFF_POINTOPOINT) {
+		dev->flags &= ~(IFF_BROADCAST | IFF_MULTICAST);
+		dev->flags |= (IFF_POINTOPOINT | IFF_NOARP);
+	} else if ((port_dev->flags & (IFF_BROADCAST | IFF_MULTICAST)) ==
+		    (IFF_BROADCAST | IFF_MULTICAST)) {
+		dev->flags |= (IFF_BROADCAST | IFF_MULTICAST);
+		dev->flags &= ~(IFF_POINTOPOINT | IFF_NOARP);
+	}
 }
 
 static int team_dev_type_check_change(struct net_device *dev,
-- 
2.39.2

[PATCH 6.1 099/228] octeontx2-af: Removed unnecessary debug messages.

[Greg Kroah-Hartman]

From: Sunil Goutham <sgoutham@marvell.com>

[ Upstream commit 609aa68d60965f70485655def733d533f99b341b ]

NPC exact match feature is supported only on one silicon
variant, removed debug messages which print that this
feature is not available on all other silicon variants.

Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230201040301.1034843-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 4e62c99d71e5 ("octeontx2-af: Fix hash extraction enable configuration")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../marvell/octeontx2/af/rvu_npc_hash.c        | 18 ++++--------------
 1 file changed, 4 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.c
index 3b0a66c0977a7..efc2e64689f7d 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.c
@@ -203,10 +203,8 @@ void npc_config_secret_key(struct rvu *rvu, int blkaddr)
 	struct rvu_hwinfo *hw = rvu->hw;
 	u8 intf;
 
-	if (!hwcap->npc_hash_extract) {
-		dev_info(rvu->dev, "HW does not support secret key configuration\n");
+	if (!hwcap->npc_hash_extract)
 		return;
-	}
 
 	for (intf = 0; intf < hw->npc_intfs; intf++) {
 		rvu_write64(rvu, blkaddr, NPC_AF_INTFX_SECRET_KEY0(intf),
@@ -224,10 +222,8 @@ void npc_program_mkex_hash(struct rvu *rvu, int blkaddr)
 	struct rvu_hwinfo *hw = rvu->hw;
 	u8 intf;
 
-	if (!hwcap->npc_hash_extract) {
-		dev_dbg(rvu->dev, "Field hash extract feature is not supported\n");
+	if (!hwcap->npc_hash_extract)
 		return;
-	}
 
 	for (intf = 0; intf < hw->npc_intfs; intf++) {
 		npc_program_mkex_hash_rx(rvu, blkaddr, intf);
@@ -1864,19 +1860,13 @@ int rvu_npc_exact_init(struct rvu *rvu)
 
 	/* Check exact match feature is supported */
 	npc_const3 = rvu_read64(rvu, blkaddr, NPC_AF_CONST3);
-	if (!(npc_const3 & BIT_ULL(62))) {
-		dev_info(rvu->dev, "%s: No support for exact match support\n",
-			 __func__);
+	if (!(npc_const3 & BIT_ULL(62)))
 		return 0;
-	}
 
 	/* Check if kex profile has enabled EXACT match nibble */
 	cfg = rvu_read64(rvu, blkaddr, NPC_AF_INTFX_KEX_CFG(NIX_INTF_RX));
-	if (!(cfg & NPC_EXACT_NIBBLE_HIT)) {
-		dev_info(rvu->dev, "%s: NPC exact match nibble not enabled in KEX profile\n",
-			 __func__);
+	if (!(cfg & NPC_EXACT_NIBBLE_HIT))
 		return 0;
-	}
 
 	/* Set capability to true */
 	rvu->hw->cap.npc_exact_match_enabled = true;
-- 
2.39.2

[PATCH 6.1 100/228] octeontx2-af: Fix hash extraction enable configuration

[Greg Kroah-Hartman]

From: Suman Ghosh <sumang@marvell.com>

[ Upstream commit 4e62c99d71e56817c934caa2a709a775c8cee078 ]

As of today, hash extraction support is enabled for all the silicons.
Because of which we are facing initialization issues when the silicon
does not support hash extraction. During creation of the hardware
parsing table for IPv6 address, we need to consider if hash extraction
is enabled then extract only 32 bit, otherwise 128 bit needs to be
extracted. This patch fixes the issue and configures the hardware parser
based on the availability of the feature.

Fixes: a95ab93550d3 ("octeontx2-af: Use hashed field in MCAM key")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230721061222.2632521-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../marvell/octeontx2/af/rvu_npc_hash.c       | 43 ++++++++++++++++++-
 .../marvell/octeontx2/af/rvu_npc_hash.h       |  8 ++--
 2 files changed, 46 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.c
index efc2e64689f7d..34fa59575fa91 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.c
@@ -218,13 +218,54 @@ void npc_config_secret_key(struct rvu *rvu, int blkaddr)
 
 void npc_program_mkex_hash(struct rvu *rvu, int blkaddr)
 {
+	struct npc_mcam_kex_hash *mh = rvu->kpu.mkex_hash;
 	struct hw_cap *hwcap = &rvu->hw->cap;
+	u8 intf, ld, hdr_offset, byte_len;
 	struct rvu_hwinfo *hw = rvu->hw;
-	u8 intf;
+	u64 cfg;
 
+	/* Check if hardware supports hash extraction */
 	if (!hwcap->npc_hash_extract)
 		return;
 
+	/* Check if IPv6 source/destination address
+	 * should be hash enabled.
+	 * Hashing reduces 128bit SIP/DIP fields to 32bit
+	 * so that 224 bit X2 key can be used for IPv6 based filters as well,
+	 * which in turn results in more number of MCAM entries available for
+	 * use.
+	 *
+	 * Hashing of IPV6 SIP/DIP is enabled in below scenarios
+	 * 1. If the silicon variant supports hashing feature
+	 * 2. If the number of bytes of IP addr being extracted is 4 bytes ie
+	 *    32bit. The assumption here is that if user wants 8bytes of LSB of
+	 *    IP addr or full 16 bytes then his intention is not to use 32bit
+	 *    hash.
+	 */
+	for (intf = 0; intf < hw->npc_intfs; intf++) {
+		for (ld = 0; ld < NPC_MAX_LD; ld++) {
+			cfg = rvu_read64(rvu, blkaddr,
+					 NPC_AF_INTFX_LIDX_LTX_LDX_CFG(intf,
+								       NPC_LID_LC,
+								       NPC_LT_LC_IP6,
+								       ld));
+			hdr_offset = FIELD_GET(NPC_HDR_OFFSET, cfg);
+			byte_len = FIELD_GET(NPC_BYTESM, cfg);
+			/* Hashing of IPv6 source/destination address should be
+			 * enabled if,
+			 * hdr_offset == 8 (offset of source IPv6 address) or
+			 * hdr_offset == 24 (offset of destination IPv6)
+			 * address) and the number of byte to be
+			 * extracted is 4. As per hardware configuration
+			 * byte_len should be == actual byte_len - 1.
+			 * Hence byte_len is checked against 3 but nor 4.
+			 */
+			if ((hdr_offset == 8 || hdr_offset == 24) && byte_len == 3)
+				mh->lid_lt_ld_hash_en[intf][NPC_LID_LC][NPC_LT_LC_IP6][ld] = true;
+		}
+	}
+
+	/* Update hash configuration if the field is hash enabled */
 	for (intf = 0; intf < hw->npc_intfs; intf++) {
 		npc_program_mkex_hash_rx(rvu, blkaddr, intf);
 		npc_program_mkex_hash_tx(rvu, blkaddr, intf);
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.h
index a1c3d987b8044..57a09328d46b5 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.h
@@ -70,8 +70,8 @@ static struct npc_mcam_kex_hash npc_mkex_hash_default __maybe_unused = {
 	[NIX_INTF_RX] = {
 		[NPC_LID_LC] = {
 			[NPC_LT_LC_IP6] = {
-				true,
-				true,
+				false,
+				false,
 			},
 		},
 	},
@@ -79,8 +79,8 @@ static struct npc_mcam_kex_hash npc_mkex_hash_default __maybe_unused = {
 	[NIX_INTF_TX] = {
 		[NPC_LID_LC] = {
 			[NPC_LT_LC_IP6] = {
-				true,
-				true,
+				false,
+				false,
 			},
 		},
 	},
-- 
2.39.2

[PATCH 6.1 101/228] net: stmmac: Apply redundant write work around on 4.xx too

[Greg Kroah-Hartman]

From: Vincent Whitchurch <vincent.whitchurch@axis.com>

[ Upstream commit 284779dbf4e98753458708783af8c35630674a21 ]

commit a3a57bf07de23fe1ff779e0fdf710aa581c3ff73 ("net: stmmac: work
around sporadic tx issue on link-up") worked around a problem with TX
sometimes not working after a link-up by avoiding a redundant write to
MAC_CTRL_REG (aka GMAC_CONFIG), since the IP appeared to have problems
with handling multiple writes to that register in some cases.

That commit however only added the work around to dwmac_lib.c (apart
from the common code in stmmac_main.c), but my systems with version
4.21a of the IP exhibit the same problem, so add the work around to
dwmac4_lib.c too.

Fixes: a3a57bf07de2 ("net: stmmac: work around sporadic tx issue on link-up")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230721-stmmac-tx-workaround-v1-1-9411cbd5ee07@axis.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
index d1c605777985f..7c26394f665e4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
@@ -207,13 +207,15 @@ void stmmac_dwmac4_set_mac_addr(void __iomem *ioaddr, const u8 addr[6],
 void stmmac_dwmac4_set_mac(void __iomem *ioaddr, bool enable)
 {
 	u32 value = readl(ioaddr + GMAC_CONFIG);
+	u32 old_val = value;
 
 	if (enable)
 		value |= GMAC_CONFIG_RE | GMAC_CONFIG_TE;
 	else
 		value &= ~(GMAC_CONFIG_TE | GMAC_CONFIG_RE);
 
-	writel(value, ioaddr + GMAC_CONFIG);
+	if (value != old_val)
+		writel(value, ioaddr + GMAC_CONFIG);
 }
 
 void stmmac_dwmac4_get_mac_addr(void __iomem *ioaddr, unsigned char *addr,
-- 
2.39.2

[PATCH 6.1 102/228] platform/x86: msi-laptop: Fix rfkill out-of-sync on MSI Wind U100

[Greg Kroah-Hartman]

From: Maxim Mikityanskiy <maxtram95@gmail.com>

[ Upstream commit ad084a6d99bc182bf109c190c808e2ea073ec57b ]

Only the HW rfkill state is toggled on laptops with quirks->ec_read_only
(so far only MSI Wind U90/U100). There are, however, a few issues with
the implementation:

1. The initial HW state is always unblocked, regardless of the actual
   state on boot, because msi_init_rfkill only sets the SW state,
   regardless of ec_read_only.

2. The initial SW state corresponds to the actual state on boot, but it
   can't be changed afterwards, because set_device_state returns
   -EOPNOTSUPP. It confuses the userspace, making Wi-Fi and/or Bluetooth
   unusable if it was blocked on boot, and breaking the airplane mode if
   the rfkill was unblocked on boot.

Address the above issues by properly initializing the HW state on
ec_read_only laptops and by allowing the userspace to toggle the SW
state. Don't set the SW state ourselves and let the userspace fully
control it. Toggling the SW state is a no-op, however, it allows the
userspace to properly toggle the airplane mode. The actual SW radio
disablement is handled by the corresponding rtl818x_pci and btusb
drivers that have their own rfkills.

Tested on MSI Wind U100 Plus, BIOS ver 1.0G, EC ver 130.

Fixes: 0816392b97d4 ("msi-laptop: merge quirk tables to one")
Fixes: 0de6575ad0a8 ("msi-laptop: Add MSI Wind U90/U100 support")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/r/20230721145423.161057-1-maxtram95@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/msi-laptop.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/platform/x86/msi-laptop.c b/drivers/platform/x86/msi-laptop.c
index 6b18ec543ac3a..f4c6c36e05a52 100644
--- a/drivers/platform/x86/msi-laptop.c
+++ b/drivers/platform/x86/msi-laptop.c
@@ -208,7 +208,7 @@ static ssize_t set_device_state(const char *buf, size_t count, u8 mask)
 		return -EINVAL;
 
 	if (quirks->ec_read_only)
-		return -EOPNOTSUPP;
+		return 0;
 
 	/* read current device state */
 	result = ec_read(MSI_STANDARD_EC_COMMAND_ADDRESS, &rdata);
@@ -838,15 +838,15 @@ static bool msi_laptop_i8042_filter(unsigned char data, unsigned char str,
 static void msi_init_rfkill(struct work_struct *ignored)
 {
 	if (rfk_wlan) {
-		rfkill_set_sw_state(rfk_wlan, !wlan_s);
+		msi_rfkill_set_state(rfk_wlan, !wlan_s);
 		rfkill_wlan_set(NULL, !wlan_s);
 	}
 	if (rfk_bluetooth) {
-		rfkill_set_sw_state(rfk_bluetooth, !bluetooth_s);
+		msi_rfkill_set_state(rfk_bluetooth, !bluetooth_s);
 		rfkill_bluetooth_set(NULL, !bluetooth_s);
 	}
 	if (rfk_threeg) {
-		rfkill_set_sw_state(rfk_threeg, !threeg_s);
+		msi_rfkill_set_state(rfk_threeg, !threeg_s);
 		rfkill_threeg_set(NULL, !threeg_s);
 	}
 }
-- 
2.39.2

[PATCH 6.1 103/228] x86/traps: Fix load_unaligned_zeropad() handling for shared TDX memory

[Greg Kroah-Hartman]

From: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>

[ Upstream commit 9f9116406120638b4d8db3831ffbc430dd2e1e95 ]

Commit c4e34dd99f2e ("x86: simplify load_unaligned_zeropad()
implementation") changes how exceptions around load_unaligned_zeropad()
handled.  The kernel now uses the fault_address in fixup_exception() to
verify the address calculations for the load_unaligned_zeropad().

It works fine for #PF, but breaks on #VE since no fault address is
passed down to fixup_exception().

Propagating ve_info.gla down to fixup_exception() resolves the issue.

See commit 1e7769653b06 ("x86/tdx: Handle load_unaligned_zeropad()
page-cross to a shared page") for more context.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Michael Kelley <mikelley@microsoft.com>
Fixes: c4e34dd99f2e ("x86: simplify load_unaligned_zeropad() implementation")
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/traps.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index d3fdec706f1d2..c0a5a4f225d9a 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -697,9 +697,10 @@ static bool try_fixup_enqcmd_gp(void)
 }
 
 static bool gp_try_fixup_and_notify(struct pt_regs *regs, int trapnr,
-				    unsigned long error_code, const char *str)
+				    unsigned long error_code, const char *str,
+				    unsigned long address)
 {
-	if (fixup_exception(regs, trapnr, error_code, 0))
+	if (fixup_exception(regs, trapnr, error_code, address))
 		return true;
 
 	current->thread.error_code = error_code;
@@ -759,7 +760,7 @@ DEFINE_IDTENTRY_ERRORCODE(exc_general_protection)
 		goto exit;
 	}
 
-	if (gp_try_fixup_and_notify(regs, X86_TRAP_GP, error_code, desc))
+	if (gp_try_fixup_and_notify(regs, X86_TRAP_GP, error_code, desc, 0))
 		goto exit;
 
 	if (error_code)
@@ -1357,17 +1358,20 @@ DEFINE_IDTENTRY(exc_device_not_available)
 
 #define VE_FAULT_STR "VE fault"
 
-static void ve_raise_fault(struct pt_regs *regs, long error_code)
+static void ve_raise_fault(struct pt_regs *regs, long error_code,
+			   unsigned long address)
 {
 	if (user_mode(regs)) {
 		gp_user_force_sig_segv(regs, X86_TRAP_VE, error_code, VE_FAULT_STR);
 		return;
 	}
 
-	if (gp_try_fixup_and_notify(regs, X86_TRAP_VE, error_code, VE_FAULT_STR))
+	if (gp_try_fixup_and_notify(regs, X86_TRAP_VE, error_code,
+				    VE_FAULT_STR, address)) {
 		return;
+	}
 
-	die_addr(VE_FAULT_STR, regs, error_code, 0);
+	die_addr(VE_FAULT_STR, regs, error_code, address);
 }
 
 /*
@@ -1431,7 +1435,7 @@ DEFINE_IDTENTRY(exc_virtualization_exception)
 	 * it successfully, treat it as #GP(0) and handle it.
 	 */
 	if (!tdx_handle_virt_exception(regs, &ve))
-		ve_raise_fault(regs, 0);
+		ve_raise_fault(regs, 0, ve.gla);
 
 	cond_local_irq_disable(regs);
 }
-- 
2.39.2

[PATCH 6.1 104/228] igc: Fix Kernel Panic during ndo_tx_timeout callback

[Greg Kroah-Hartman]

From: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>

[ Upstream commit d4a7ce642100765119a872d4aba1bf63e3a22c8a ]

The Xeon validation group has been carrying out some loaded tests
with various HW configurations, and they have seen some transmit
queue time out happening during the test. This will cause the
reset adapter function to be called by igc_tx_timeout().
Similar race conditions may arise when the interface is being brought
down and up in igc_reinit_locked(), an interrupt being generated, and
igc_clean_tx_irq() being called to complete the TX.

When the igc_tx_timeout() function is invoked, this patch will turn
off all TX ring HW queues during igc_down() process. TX ring HW queues
will be activated again during the igc_configure_tx_ring() process
when performing the igc_up() procedure later.

This patch also moved existing igc_disable_tx_ring_hw() to avoid using
forward declaration.

Kernel trace:
[ 7678.747813] ------------[ cut here ]------------
[ 7678.757914] NETDEV WATCHDOG: enp1s0 (igc): transmit queue 2 timed out
[ 7678.770117] WARNING: CPU: 0 PID: 13 at net/sched/sch_generic.c:525 dev_watchdog+0x1ae/0x1f0
[ 7678.784459] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype nft_compat
nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO) rktpm(PO)
cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO) svfs_pci_hotplug(PO)
vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO) svheartbeat(PO) ioapic(PO)
sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO) smbus(PO) spiflash_cdf(PO) arden(PO)
dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO) pch(PO) sviotargets(PO) svbdf(PO) svmem(PO)
svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO) svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO)
fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O) ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO)
regsupport(O) libnvdimm nls_cp437 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel
snd_intel_dspcfg snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci
[ 7678.784496]  input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm fuse backlight
configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic pegasus mmc_block usbhid
mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa scsi_transport_sas e1000e e1000 e100 ax88179_178a
usbnet xhci_pci sd_mod xhci_hcd t10_pi crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore
crct10dif_generic ptp crct10dif_common usb_common pps_core
[ 7679.200403] RIP: 0010:dev_watchdog+0x1ae/0x1f0
[ 7679.210201] Code: 28 e9 53 ff ff ff 4c 89 e7 c6 05 06 42 b9 00 01 e8 17 d1 fb ff 44 89 e9 4c
89 e6 48 c7 c7 40 ad fb 81 48 89 c2 e8 52 62 82 ff <0f> 0b e9 72 ff ff ff 65 8b 05 80 7d 7c 7e
89 c0 48 0f a3 05 0a c1
[ 7679.245438] RSP: 0018:ffa00000001f7d90 EFLAGS: 00010282
[ 7679.256021] RAX: 0000000000000000 RBX: ff11000109938440 RCX: 0000000000000000
[ 7679.268710] RDX: ff11000361e26cd8 RSI: ff11000361e1b880 RDI: ff11000361e1b880
[ 7679.281314] RBP: ffa00000001f7da8 R08: ff1100035f8fffe8 R09: 0000000000027ffb
[ 7679.293840] R10: 0000000000001f0a R11: ff1100035f840000 R12: ff11000109938000
[ 7679.306276] R13: 0000000000000002 R14: dead000000000122 R15: ffa00000001f7e18
[ 7679.318648] FS:  0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000
[ 7679.332064] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7679.342757] CR2: 00007ffff7fca168 CR3: 000000013b08a006 CR4: 0000000000471ef8
[ 7679.354984] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 7679.367207] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 7679.379370] PKRU: 55555554
[ 7679.386446] Call Trace:
[ 7679.393152]  <TASK>
[ 7679.399363]  ? __pfx_dev_watchdog+0x10/0x10
[ 7679.407870]  call_timer_fn+0x31/0x110
[ 7679.415698]  expire_timers+0xb2/0x120
[ 7679.423403]  run_timer_softirq+0x179/0x1e0
[ 7679.431532]  ? __schedule+0x2b1/0x820
[ 7679.439078]  __do_softirq+0xd1/0x295
[ 7679.446426]  ? __pfx_smpboot_thread_fn+0x10/0x10
[ 7679.454867]  run_ksoftirqd+0x22/0x30
[ 7679.462058]  smpboot_thread_fn+0xb7/0x160
[ 7679.469670]  kthread+0xcd/0xf0
[ 7679.476097]  ? __pfx_kthread+0x10/0x10
[ 7679.483211]  ret_from_fork+0x29/0x50
[ 7679.490047]  </TASK>
[ 7679.495204] ---[ end trace 0000000000000000 ]---
[ 7679.503179] igc 0000:01:00.0 enp1s0: Register Dump
[ 7679.511230] igc 0000:01:00.0 enp1s0: Register Name   Value
[ 7679.519892] igc 0000:01:00.0 enp1s0: CTRL            181c0641
[ 7679.528782] igc 0000:01:00.0 enp1s0: STATUS          40280683
[ 7679.537551] igc 0000:01:00.0 enp1s0: CTRL_EXT        10000040
[ 7679.546284] igc 0000:01:00.0 enp1s0: MDIC            180a3800
[ 7679.554942] igc 0000:01:00.0 enp1s0: ICR             00000081
[ 7679.563503] igc 0000:01:00.0 enp1s0: RCTL            04408022
[ 7679.571963] igc 0000:01:00.0 enp1s0: RDLEN[0-3]      00001000 00001000 00001000 00001000
[ 7679.583075] igc 0000:01:00.0 enp1s0: RDH[0-3]        00000068 000000b6 0000000f 00000031
[ 7679.594162] igc 0000:01:00.0 enp1s0: RDT[0-3]        00000066 000000b2 0000000e 00000030
[ 7679.605174] igc 0000:01:00.0 enp1s0: RXDCTL[0-3]     02040808 02040808 02040808 02040808
[ 7679.616196] igc 0000:01:00.0 enp1s0: RDBAL[0-3]      1bb7c000 1bb7f000 1bb82000 0ef33000
[ 7679.627242] igc 0000:01:00.0 enp1s0: RDBAH[0-3]      00000001 00000001 00000001 00000001
[ 7679.638256] igc 0000:01:00.0 enp1s0: TCTL            a503f0fa
[ 7679.646607] igc 0000:01:00.0 enp1s0: TDBAL[0-3]      2ba4a000 1bb6f000 1bb74000 1bb79000
[ 7679.657609] igc 0000:01:00.0 enp1s0: TDBAH[0-3]      00000001 00000001 00000001 00000001
[ 7679.668551] igc 0000:01:00.0 enp1s0: TDLEN[0-3]      00001000 00001000 00001000 00001000
[ 7679.679470] igc 0000:01:00.0 enp1s0: TDH[0-3]        000000a7 0000002d 000000bf 000000d9
[ 7679.690406] igc 0000:01:00.0 enp1s0: TDT[0-3]        000000a7 0000002d 000000bf 000000d9
[ 7679.701264] igc 0000:01:00.0 enp1s0: TXDCTL[0-3]     02100108 02100108 02100108 02100108
[ 7679.712123] igc 0000:01:00.0 enp1s0: Reset adapter
[ 7683.085967] igc 0000:01:00.0 enp1s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 8086.945561] ------------[ cut here ]------------
Entering kdb (current=0xffffffff8220b200, pid 0) on processor 0
Oops: (null) due to oops @ 0xffffffff81573888
RIP: 0010:dql_completed+0x148/0x160
Code: c9 00 48 89 57 58 e9 46 ff ff ff 45 85 e4 41 0f 95 c4 41 39 db 0f 95
c1 41 84 cc 74 05 45 85 ed 78 0a 44 89 c1 e9 27 ff ff ff <0f> 0b 01 f6 44 89
c1 29 f1 0f 48 ca eb 8c cc cc cc cc cc cc cc cc
RSP: 0018:ffa0000000003e00 EFLAGS: 00010287
RAX: 000000000000006c RBX: ffa0000003eb0f78 RCX: ff11000109938000
RDX: 0000000000000003 RSI: 0000000000000160 RDI: ff110001002e9480
RBP: ffa0000000003ed8 R08: ff110001002e93c0 R09: ffa0000000003d28
R10: 0000000000007cc0 R11: 0000000000007c54 R12: 00000000ffffffd9
R13: ff1100037039cb00 R14: 00000000ffffffd9 R15: ff1100037039c048
FS:  0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 <IRQ>
 ? igc_poll+0x1a9/0x14d0 [igc]
 __napi_poll+0x2e/0x1b0
 net_rx_action+0x126/0x250
 __do_softirq+0xd1/0x295
 irq_exit_rcu+0xc5/0xf0
 common_interrupt+0x86/0xa0
 </IRQ>
 <TASK>
 asm_common_interrupt+0x27/0x40
RIP: 0010:cpuidle_enter_state+0xd3/0x3e0
Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00 31 ff e8 1b
de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00 49 63 cf
4c 2b 75 c8 48 8d 04 49 48 89 ca 48 8d
RSP: 0018:ffffffff82203df0 EFLAGS: 00000202
RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f
RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000
RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018
R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000
R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002
 cpuidle_enter+0x2e/0x50
 call_cpuidle+0x23/0x40
 do_idle+0x1be/0x220
 cpu_startup_entry+0x20/0x30
 rest_init+0xb5/0xc0
 arch_call_rest_init+0xe/0x30
 start_kernel+0x448/0x760
 x86_64_start_kernel+0x109/0x150
 secondary_startup_64_no_verify+0xe0/0xeb
 </TASK>
more>
[0]kdb>

[0]kdb>
[0]kdb> go
Catastrophic error detected
kdb_continue_catastrophic=0, type go a second time if you really want to
continue
[0]kdb> go
Catastrophic error detected
kdb_continue_catastrophic=0, attempting to continue
[ 8086.955689] refcount_t: underflow; use-after-free.
[ 8086.955697] WARNING: CPU: 0 PID: 0 at lib/refcount.c:28 refcount_warn_saturate+0xc2/0x110
[ 8086.955706] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype nft_compat
nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO) rktpm(PO)
cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO)
svfs_pci_hotplug(PO) vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO)
svheartbeat(PO) ioapic(PO) sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO)
smbus(PO) spiflash_cdf(PO) arden(PO) dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO)
pch(PO) sviotargets(PO) svbdf(PO) svmem(PO) svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO)
svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO) fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O)
ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO) regsupport(O) libnvdimm nls_cp437
snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg
snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci
[ 8086.955751]  input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm
fuse backlight configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic
pegasus mmc_block usbhid mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa
scsi_transport_sas e1000e e1000 e100 ax88179_178a usbnet xhci_pci sd_mod xhci_hcd t10_pi
crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore crct10dif_generic ptp crct10dif_common
usb_common pps_core
[ 8086.955784] RIP: 0010:refcount_warn_saturate+0xc2/0x110
[ 8086.955788] Code: 01 e8 82 e7 b4 ff 0f 0b 5d c3 cc cc cc cc 80 3d 68 c6 eb 00 00 75 81
48 c7 c7 a0 87 f6 81 c6 05 58 c6 eb 00 01 e8 5e e7 b4 ff <0f> 0b 5d c3 cc cc cc cc 80 3d
42 c6 eb 00 00 0f 85 59 ff ff ff 48
[ 8086.955790] RSP: 0018:ffa0000000003da0 EFLAGS: 00010286
[ 8086.955793] RAX: 0000000000000000 RBX: ff1100011da40ee0 RCX: ff11000361e1b888
[ 8086.955794] RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ff11000361e1b880
[ 8086.955795] RBP: ffa0000000003da0 R08: 80000000ffff9f45 R09: ffa0000000003d28
[ 8086.955796] R10: ff1100035f840000 R11: 0000000000000028 R12: ff11000319ff8000
[ 8086.955797] R13: ff1100011bb79d60 R14: 00000000ffffffd6 R15: ff1100037039cb00
[ 8086.955798] FS:  0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000
[ 8086.955800] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8086.955801] CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8
[ 8086.955803] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 8086.955803] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 8086.955804] PKRU: 55555554
[ 8086.955805] Call Trace:
[ 8086.955806]  <IRQ>
[ 8086.955808]  tcp_wfree+0x112/0x130
[ 8086.955814]  skb_release_head_state+0x24/0xa0
[ 8086.955818]  napi_consume_skb+0x9c/0x160
[ 8086.955821]  igc_poll+0x5d8/0x14d0 [igc]
[ 8086.955835]  __napi_poll+0x2e/0x1b0
[ 8086.955839]  net_rx_action+0x126/0x250
[ 8086.955843]  __do_softirq+0xd1/0x295
[ 8086.955846]  irq_exit_rcu+0xc5/0xf0
[ 8086.955851]  common_interrupt+0x86/0xa0
[ 8086.955857]  </IRQ>
[ 8086.955857]  <TASK>
[ 8086.955858]  asm_common_interrupt+0x27/0x40
[ 8086.955862] RIP: 0010:cpuidle_enter_state+0xd3/0x3e0
[ 8086.955866] Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00 31 ff e8
1b de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00 49 63 cf 4c 2b 75
c8 48 8d 04 49 48 89 ca 48 8d
[ 8086.955867] RSP: 0018:ffffffff82203df0 EFLAGS: 00000202
[ 8086.955869] RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f
[ 8086.955870] RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000
[ 8086.955871] RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018
[ 8086.955872] R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000
[ 8086.955873] R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002
[ 8086.955875]  cpuidle_enter+0x2e/0x50
[ 8086.955880]  call_cpuidle+0x23/0x40
[ 8086.955884]  do_idle+0x1be/0x220
[ 8086.955887]  cpu_startup_entry+0x20/0x30
[ 8086.955889]  rest_init+0xb5/0xc0
[ 8086.955892]  arch_call_rest_init+0xe/0x30
[ 8086.955895]  start_kernel+0x448/0x760
[ 8086.955898]  x86_64_start_kernel+0x109/0x150
[ 8086.955900]  secondary_startup_64_no_verify+0xe0/0xeb
[ 8086.955904]  </TASK>
[ 8086.955904] ---[ end trace 0000000000000000 ]---
[ 8086.955912] ------------[ cut here ]------------
[ 8086.955913] kernel BUG at lib/dynamic_queue_limits.c:27!
[ 8086.955918] invalid opcode: 0000 [#1] SMP
[ 8086.955922] RIP: 0010:dql_completed+0x148/0x160
[ 8086.955925] Code: c9 00 48 89 57 58 e9 46 ff ff ff 45 85 e4 41 0f 95 c4 41 39 db
0f 95 c1 41 84 cc 74 05 45 85 ed 78 0a 44 89 c1 e9 27 ff ff ff <0f> 0b 01 f6 44 89
c1 29 f1 0f 48 ca eb 8c cc cc cc cc cc cc cc cc
[ 8086.955927] RSP: 0018:ffa0000000003e00 EFLAGS: 00010287
[ 8086.955928] RAX: 000000000000006c RBX: ffa0000003eb0f78 RCX: ff11000109938000
[ 8086.955929] RDX: 0000000000000003 RSI: 0000000000000160 RDI: ff110001002e9480
[ 8086.955930] RBP: ffa0000000003ed8 R08: ff110001002e93c0 R09: ffa0000000003d28
[ 8086.955931] R10: 0000000000007cc0 R11: 0000000000007c54 R12: 00000000ffffffd9
[ 8086.955932] R13: ff1100037039cb00 R14: 00000000ffffffd9 R15: ff1100037039c048
[ 8086.955933] FS:  0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000
[ 8086.955934] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8086.955935] CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8
[ 8086.955936] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 8086.955937] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 8086.955938] PKRU: 55555554
[ 8086.955939] Call Trace:
[ 8086.955939]  <IRQ>
[ 8086.955940]  ? igc_poll+0x1a9/0x14d0 [igc]
[ 8086.955949]  __napi_poll+0x2e/0x1b0
[ 8086.955952]  net_rx_action+0x126/0x250
[ 8086.955956]  __do_softirq+0xd1/0x295
[ 8086.955958]  irq_exit_rcu+0xc5/0xf0
[ 8086.955961]  common_interrupt+0x86/0xa0
[ 8086.955964]  </IRQ>
[ 8086.955965]  <TASK>
[ 8086.955965]  asm_common_interrupt+0x27/0x40
[ 8086.955968] RIP: 0010:cpuidle_enter_state+0xd3/0x3e0
[ 8086.955971] Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00
31 ff e8 1b de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00
49 63 cf 4c 2b 75 c8 48 8d 04 49 48 89 ca 48 8d
[ 8086.955972] RSP: 0018:ffffffff82203df0 EFLAGS: 00000202
[ 8086.955973] RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f
[ 8086.955974] RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000
[ 8086.955974] RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018
[ 8086.955975] R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000
[ 8086.955976] R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002
[ 8086.955978]  cpuidle_enter+0x2e/0x50
[ 8086.955981]  call_cpuidle+0x23/0x40
[ 8086.955984]  do_idle+0x1be/0x220
[ 8086.955985]  cpu_startup_entry+0x20/0x30
[ 8086.955987]  rest_init+0xb5/0xc0
[ 8086.955990]  arch_call_rest_init+0xe/0x30
[ 8086.955992]  start_kernel+0x448/0x760
[ 8086.955994]  x86_64_start_kernel+0x109/0x150
[ 8086.955996]  secondary_startup_64_no_verify+0xe0/0xeb
[ 8086.955998]  </TASK>
[ 8086.955999] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype
nft_compat nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO)
rktpm(PO) cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO)
svfs_pci_hotplug(PO) vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO)
svheartbeat(PO) ioapic(PO) sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO)
smbus(PO) spiflash_cdf(PO) arden(PO) dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO)
pch(PO) sviotargets(PO) svbdf(PO) svmem(PO) svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO)
svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO) fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O)
ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO) regsupport(O) libnvdimm nls_cp437
snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg
snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci
[ 8086.956029]  input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm
fuse backlight configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic
pegasus mmc_block usbhid mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa
scsi_transport_sas e1000e e1000 e100 ax88179_178a usbnet xhci_pci sd_mod xhci_hcd t10_pi
crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore crct10dif_generic ptp crct10dif_common
usb_common pps_core
[16762.543675] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.593 msecs
[16762.543678] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.595 msecs
[16762.543673] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.495 msecs
[16762.543679] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.599 msecs
[16762.543678] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.598 msecs
[16762.543690] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.605 msecs
[16762.543684] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.599 msecs
[16762.543693] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.613 msecs
[16762.543784] ---[ end trace 0000000000000000 ]---
[16762.849099] RIP: 0010:dql_completed+0x148/0x160
PANIC: Fatal exception in interrupt

Fixes: 9b275176270e ("igc: Add ndo_tx_timeout support")
Tested-by: Alejandra Victoria Alcaraz <alejandra.victoria.alcaraz@intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igc/igc_main.c | 40 ++++++++++++++++-------
 1 file changed, 28 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index 2e091a4a065e7..d877dc0f87f71 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -317,6 +317,33 @@ static void igc_clean_all_tx_rings(struct igc_adapter *adapter)
 			igc_clean_tx_ring(adapter->tx_ring[i]);
 }
 
+static void igc_disable_tx_ring_hw(struct igc_ring *ring)
+{
+	struct igc_hw *hw = &ring->q_vector->adapter->hw;
+	u8 idx = ring->reg_idx;
+	u32 txdctl;
+
+	txdctl = rd32(IGC_TXDCTL(idx));
+	txdctl &= ~IGC_TXDCTL_QUEUE_ENABLE;
+	txdctl |= IGC_TXDCTL_SWFLUSH;
+	wr32(IGC_TXDCTL(idx), txdctl);
+}
+
+/**
+ * igc_disable_all_tx_rings_hw - Disable all transmit queue operation
+ * @adapter: board private structure
+ */
+static void igc_disable_all_tx_rings_hw(struct igc_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		struct igc_ring *tx_ring = adapter->tx_ring[i];
+
+		igc_disable_tx_ring_hw(tx_ring);
+	}
+}
+
 /**
  * igc_setup_tx_resources - allocate Tx resources (Descriptors)
  * @tx_ring: tx descriptor ring (for a specific queue) to setup
@@ -5026,6 +5053,7 @@ void igc_down(struct igc_adapter *adapter)
 	/* clear VLAN promisc flag so VFTA will be updated if necessary */
 	adapter->flags &= ~IGC_FLAG_VLAN_PROMISC;
 
+	igc_disable_all_tx_rings_hw(adapter);
 	igc_clean_all_tx_rings(adapter);
 	igc_clean_all_rx_rings(adapter);
 }
@@ -7124,18 +7152,6 @@ void igc_enable_rx_ring(struct igc_ring *ring)
 		igc_alloc_rx_buffers(ring, igc_desc_unused(ring));
 }
 
-static void igc_disable_tx_ring_hw(struct igc_ring *ring)
-{
-	struct igc_hw *hw = &ring->q_vector->adapter->hw;
-	u8 idx = ring->reg_idx;
-	u32 txdctl;
-
-	txdctl = rd32(IGC_TXDCTL(idx));
-	txdctl &= ~IGC_TXDCTL_QUEUE_ENABLE;
-	txdctl |= IGC_TXDCTL_SWFLUSH;
-	wr32(IGC_TXDCTL(idx), txdctl);
-}
-
 void igc_disable_tx_ring(struct igc_ring *ring)
 {
 	igc_disable_tx_ring_hw(ring);
-- 
2.39.2

[PATCH 6.1 105/228] netfilter: nft_set_rbtree: fix overlap expiration walk

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit f718863aca469a109895cb855e6b81fff4827d71 ]

The lazy gc on insert that should remove timed-out entries fails to release
the other half of the interval, if any.

Can be reproduced with tests/shell/testcases/sets/0044interval_overlap_0
in nftables.git and kmemleak enabled kernel.

Second bug is the use of rbe_prev vs. prev pointer.
If rbe_prev() returns NULL after at least one iteration, rbe_prev points
to element that is not an end interval, hence it should not be removed.

Lastly, check the genmask of the end interval if this is active in the
current generation.

Fixes: c9e6978e2725 ("netfilter: nft_set_rbtree: Switch to node list walk for overlap detection")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_set_rbtree.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/net/netfilter/nft_set_rbtree.c b/net/netfilter/nft_set_rbtree.c
index 5c05c9b990fba..8d73fffd2d09d 100644
--- a/net/netfilter/nft_set_rbtree.c
+++ b/net/netfilter/nft_set_rbtree.c
@@ -217,29 +217,37 @@ static void *nft_rbtree_get(const struct net *net, const struct nft_set *set,
 
 static int nft_rbtree_gc_elem(const struct nft_set *__set,
 			      struct nft_rbtree *priv,
-			      struct nft_rbtree_elem *rbe)
+			      struct nft_rbtree_elem *rbe,
+			      u8 genmask)
 {
 	struct nft_set *set = (struct nft_set *)__set;
 	struct rb_node *prev = rb_prev(&rbe->node);
-	struct nft_rbtree_elem *rbe_prev = NULL;
+	struct nft_rbtree_elem *rbe_prev;
 	struct nft_set_gc_batch *gcb;
 
 	gcb = nft_set_gc_batch_check(set, NULL, GFP_ATOMIC);
 	if (!gcb)
 		return -ENOMEM;
 
-	/* search for expired end interval coming before this element. */
+	/* search for end interval coming before this element.
+	 * end intervals don't carry a timeout extension, they
+	 * are coupled with the interval start element.
+	 */
 	while (prev) {
 		rbe_prev = rb_entry(prev, struct nft_rbtree_elem, node);
-		if (nft_rbtree_interval_end(rbe_prev))
+		if (nft_rbtree_interval_end(rbe_prev) &&
+		    nft_set_elem_active(&rbe_prev->ext, genmask))
 			break;
 
 		prev = rb_prev(prev);
 	}
 
-	if (rbe_prev) {
+	if (prev) {
+		rbe_prev = rb_entry(prev, struct nft_rbtree_elem, node);
+
 		rb_erase(&rbe_prev->node, &priv->root);
 		atomic_dec(&set->nelems);
+		nft_set_gc_batch_add(gcb, rbe_prev);
 	}
 
 	rb_erase(&rbe->node, &priv->root);
@@ -321,7 +329,7 @@ static int __nft_rbtree_insert(const struct net *net, const struct nft_set *set,
 
 		/* perform garbage collection to avoid bogus overlap reports. */
 		if (nft_set_elem_expired(&rbe->ext)) {
-			err = nft_rbtree_gc_elem(set, priv, rbe);
+			err = nft_rbtree_gc_elem(set, priv, rbe, genmask);
 			if (err < 0)
 				return err;
 
-- 
2.39.2

[PATCH 6.1 106/228] netfilter: nf_tables: skip immediate deactivate in _PREPARE_ERROR

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit 0a771f7b266b02d262900c75f1e175c7fe76fec2 ]

On error when building the rule, the immediate expression unbinds the
chain, hence objects can be deactivated by the transaction records.

Otherwise, it is possible to trigger the following warning:

 WARNING: CPU: 3 PID: 915 at net/netfilter/nf_tables_api.c:2013 nf_tables_chain_destroy+0x1f7/0x210 [nf_tables]
 CPU: 3 PID: 915 Comm: chain-bind-err- Not tainted 6.1.39 #1
 RIP: 0010:nf_tables_chain_destroy+0x1f7/0x210 [nf_tables]

Fixes: 4bedf9eee016 ("netfilter: nf_tables: fix chain binding transaction logic")
Reported-by: Kevin Rich <kevinrich1337@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_immediate.c | 27 ++++++++++++++++++---------
 1 file changed, 18 insertions(+), 9 deletions(-)

diff --git a/net/netfilter/nft_immediate.c b/net/netfilter/nft_immediate.c
index 900e75e8c3465..391c18e4b3ebd 100644
--- a/net/netfilter/nft_immediate.c
+++ b/net/netfilter/nft_immediate.c
@@ -125,15 +125,27 @@ static void nft_immediate_activate(const struct nft_ctx *ctx,
 	return nft_data_hold(&priv->data, nft_dreg_to_type(priv->dreg));
 }
 
+static void nft_immediate_chain_deactivate(const struct nft_ctx *ctx,
+					   struct nft_chain *chain,
+					   enum nft_trans_phase phase)
+{
+	struct nft_ctx chain_ctx;
+	struct nft_rule *rule;
+
+	chain_ctx = *ctx;
+	chain_ctx.chain = chain;
+
+	list_for_each_entry(rule, &chain->rules, list)
+		nft_rule_expr_deactivate(&chain_ctx, rule, phase);
+}
+
 static void nft_immediate_deactivate(const struct nft_ctx *ctx,
 				     const struct nft_expr *expr,
 				     enum nft_trans_phase phase)
 {
 	const struct nft_immediate_expr *priv = nft_expr_priv(expr);
 	const struct nft_data *data = &priv->data;
-	struct nft_ctx chain_ctx;
 	struct nft_chain *chain;
-	struct nft_rule *rule;
 
 	if (priv->dreg == NFT_REG_VERDICT) {
 		switch (data->verdict.code) {
@@ -143,20 +155,17 @@ static void nft_immediate_deactivate(const struct nft_ctx *ctx,
 			if (!nft_chain_binding(chain))
 				break;
 
-			chain_ctx = *ctx;
-			chain_ctx.chain = chain;
-
-			list_for_each_entry(rule, &chain->rules, list)
-				nft_rule_expr_deactivate(&chain_ctx, rule, phase);
-
 			switch (phase) {
 			case NFT_TRANS_PREPARE_ERROR:
 				nf_tables_unbind_chain(ctx, chain);
-				fallthrough;
+				nft_deactivate_next(ctx->net, chain);
+				break;
 			case NFT_TRANS_PREPARE:
+				nft_immediate_chain_deactivate(ctx, chain, phase);
 				nft_deactivate_next(ctx->net, chain);
 				break;
 			default:
+				nft_immediate_chain_deactivate(ctx, chain, phase);
 				nft_chain_del(chain);
 				chain->bound = false;
 				chain->table->use--;
-- 
2.39.2

[PATCH 6.1 107/228] netfilter: nf_tables: disallow rule addition to bound chain via NFTA_RULE_CHAIN_ID

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit 0ebc1064e4874d5987722a2ddbc18f94aa53b211 ]

Bail out with EOPNOTSUPP when adding rule to bound chain via
NFTA_RULE_CHAIN_ID. The following warning splat is shown when
adding a rule to a deleted bound chain:

 WARNING: CPU: 2 PID: 13692 at net/netfilter/nf_tables_api.c:2013 nf_tables_chain_destroy+0x1f7/0x210 [nf_tables]
 CPU: 2 PID: 13692 Comm: chain-bound-rul Not tainted 6.1.39 #1
 RIP: 0010:nf_tables_chain_destroy+0x1f7/0x210 [nf_tables]

Fixes: d0e2c7de92c7 ("netfilter: nf_tables: add NFT_CHAIN_BINDING")
Reported-by: Kevin Rich <kevinrich1337@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_api.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index e2e5ff6acd2bf..dd57a9ebe113d 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -3626,8 +3626,6 @@ static int nf_tables_newrule(struct sk_buff *skb, const struct nfnl_info *info,
 			NL_SET_BAD_ATTR(extack, nla[NFTA_RULE_CHAIN]);
 			return PTR_ERR(chain);
 		}
-		if (nft_chain_is_bound(chain))
-			return -EOPNOTSUPP;
 
 	} else if (nla[NFTA_RULE_CHAIN_ID]) {
 		chain = nft_chain_lookup_byid(net, table, nla[NFTA_RULE_CHAIN_ID],
@@ -3640,6 +3638,9 @@ static int nf_tables_newrule(struct sk_buff *skb, const struct nfnl_info *info,
 		return -EINVAL;
 	}
 
+	if (nft_chain_is_bound(chain))
+		return -EOPNOTSUPP;
+
 	if (nla[NFTA_RULE_HANDLE]) {
 		handle = be64_to_cpu(nla_get_be64(nla[NFTA_RULE_HANDLE]));
 		rule = __nft_rule_lookup(chain, handle);
-- 
2.39.2

[PATCH 6.1 108/228] mm: suppress mm fault logging if fatal signal already pending

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit 5f0bc0b042fc77ff70e14c790abdec960cde4ec1 ]

Commit eda0047296a1 ("mm: make the page fault mmap locking killable")
intentionally made it much easier to trigger the "page fault fails
because a fatal signal is pending" situation, by having the mmap locking
fail early in that case.

We have long aborted page faults in other fatal cases when the actual IO
for a page is interrupted by SIGKILL - which is particularly useful for
the traditional case of NFS hanging due to network issues, but local
filesystems could cause it too if you happened to get the SIGKILL while
waiting for a page to be faulted in (eg lock_folio_maybe_drop_mmap()).

So aborting the page fault wasn't a new condition - but it now triggers
earlier, before we even get to 'handle_mm_fault()'.  And as a result the
error doesn't go through our 'fault_signal_pending()' logic, and doesn't
get filtered away there.

Normally you'd never even notice, because if a fatal signal is pending,
the new SIGSEGV we send ends up being ignored anyway.

But it turns out that there is one very noticeable exception: if you
enable 'show_unhandled_signals', the aborted page fault will be logged
in the kernel messages, and you'll get a scary line looking something
like this in your logs:

  pverados[2183248]: segfault at 55e5a00f9ae0 ip 000055e5a00f9ae0 sp 00007ffc0720bea8 error 14 in perl[55e5a00d4000+195000] likely on CPU 10 (core 4, socket 0)

which is rather misleading.  It's not really a segfault at all, it's
just "the thread was killed before the page fault completed, so we
aborted the page fault".

Fix this by just making it clear that a pending fatal signal means that
any new signal coming in after that is implicitly handled.  This will
avoid the misleading logging, since now the signal isn't 'unhandled' any
more.

Reported-and-tested-by: Fiona Ebner <f.ebner@proxmox.com>
Tested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Link: https://lore.kernel.org/lkml/8d063a26-43f5-0bb7-3203-c6a04dc159f8@proxmox.com/
Acked-by: Oleg Nesterov <oleg@redhat.com>
Fixes: eda0047296a1 ("mm: make the page fault mmap locking killable")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/signal.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/kernel/signal.c b/kernel/signal.c
index d140672185a48..5d45f5da2b36e 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -561,6 +561,10 @@ bool unhandled_signal(struct task_struct *tsk, int sig)
 	if (handler != SIG_IGN && handler != SIG_DFL)
 		return false;
 
+	/* If dying, we handle all new signals by ignoring them */
+	if (fatal_signal_pending(tsk))
+		return false;
+
 	/* if ptraced, let the tracer determine */
 	return !tsk->ptrace;
 }
-- 
2.39.2

[PATCH 6.1 109/228] net/sched: mqprio: refactor nlattr parsing to a separate function

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit feb2cf3dcfb930aec2ca65c66d1365543d5ba943 ]

mqprio_init() is quite large and unwieldy to add more code to.
Split the netlink attribute parsing to a dedicated function.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 6c58c8816abb ("net/sched: mqprio: Add length check for TCA_MQPRIO_{MAX/MIN}_RATE64")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/sch_mqprio.c | 114 +++++++++++++++++++++++------------------
 1 file changed, 63 insertions(+), 51 deletions(-)

diff --git a/net/sched/sch_mqprio.c b/net/sched/sch_mqprio.c
index 9f26fb7d5823c..166b22601e60f 100644
--- a/net/sched/sch_mqprio.c
+++ b/net/sched/sch_mqprio.c
@@ -130,6 +130,67 @@ static int parse_attr(struct nlattr *tb[], int maxtype, struct nlattr *nla,
 	return 0;
 }
 
+static int mqprio_parse_nlattr(struct Qdisc *sch, struct tc_mqprio_qopt *qopt,
+			       struct nlattr *opt)
+{
+	struct mqprio_sched *priv = qdisc_priv(sch);
+	struct nlattr *tb[TCA_MQPRIO_MAX + 1];
+	struct nlattr *attr;
+	int i, rem, err;
+
+	err = parse_attr(tb, TCA_MQPRIO_MAX, opt, mqprio_policy,
+			 sizeof(*qopt));
+	if (err < 0)
+		return err;
+
+	if (!qopt->hw)
+		return -EINVAL;
+
+	if (tb[TCA_MQPRIO_MODE]) {
+		priv->flags |= TC_MQPRIO_F_MODE;
+		priv->mode = *(u16 *)nla_data(tb[TCA_MQPRIO_MODE]);
+	}
+
+	if (tb[TCA_MQPRIO_SHAPER]) {
+		priv->flags |= TC_MQPRIO_F_SHAPER;
+		priv->shaper = *(u16 *)nla_data(tb[TCA_MQPRIO_SHAPER]);
+	}
+
+	if (tb[TCA_MQPRIO_MIN_RATE64]) {
+		if (priv->shaper != TC_MQPRIO_SHAPER_BW_RATE)
+			return -EINVAL;
+		i = 0;
+		nla_for_each_nested(attr, tb[TCA_MQPRIO_MIN_RATE64],
+				    rem) {
+			if (nla_type(attr) != TCA_MQPRIO_MIN_RATE64)
+				return -EINVAL;
+			if (i >= qopt->num_tc)
+				break;
+			priv->min_rate[i] = *(u64 *)nla_data(attr);
+			i++;
+		}
+		priv->flags |= TC_MQPRIO_F_MIN_RATE;
+	}
+
+	if (tb[TCA_MQPRIO_MAX_RATE64]) {
+		if (priv->shaper != TC_MQPRIO_SHAPER_BW_RATE)
+			return -EINVAL;
+		i = 0;
+		nla_for_each_nested(attr, tb[TCA_MQPRIO_MAX_RATE64],
+				    rem) {
+			if (nla_type(attr) != TCA_MQPRIO_MAX_RATE64)
+				return -EINVAL;
+			if (i >= qopt->num_tc)
+				break;
+			priv->max_rate[i] = *(u64 *)nla_data(attr);
+			i++;
+		}
+		priv->flags |= TC_MQPRIO_F_MAX_RATE;
+	}
+
+	return 0;
+}
+
 static int mqprio_init(struct Qdisc *sch, struct nlattr *opt,
 		       struct netlink_ext_ack *extack)
 {
@@ -139,9 +200,6 @@ static int mqprio_init(struct Qdisc *sch, struct nlattr *opt,
 	struct Qdisc *qdisc;
 	int i, err = -EOPNOTSUPP;
 	struct tc_mqprio_qopt *qopt = NULL;
-	struct nlattr *tb[TCA_MQPRIO_MAX + 1];
-	struct nlattr *attr;
-	int rem;
 	int len;
 
 	BUILD_BUG_ON(TC_MAX_QUEUE != TC_QOPT_MAX_QUEUE);
@@ -166,55 +224,9 @@ static int mqprio_init(struct Qdisc *sch, struct nlattr *opt,
 
 	len = nla_len(opt) - NLA_ALIGN(sizeof(*qopt));
 	if (len > 0) {
-		err = parse_attr(tb, TCA_MQPRIO_MAX, opt, mqprio_policy,
-				 sizeof(*qopt));
-		if (err < 0)
+		err = mqprio_parse_nlattr(sch, qopt, opt);
+		if (err)
 			return err;
-
-		if (!qopt->hw)
-			return -EINVAL;
-
-		if (tb[TCA_MQPRIO_MODE]) {
-			priv->flags |= TC_MQPRIO_F_MODE;
-			priv->mode = *(u16 *)nla_data(tb[TCA_MQPRIO_MODE]);
-		}
-
-		if (tb[TCA_MQPRIO_SHAPER]) {
-			priv->flags |= TC_MQPRIO_F_SHAPER;
-			priv->shaper = *(u16 *)nla_data(tb[TCA_MQPRIO_SHAPER]);
-		}
-
-		if (tb[TCA_MQPRIO_MIN_RATE64]) {
-			if (priv->shaper != TC_MQPRIO_SHAPER_BW_RATE)
-				return -EINVAL;
-			i = 0;
-			nla_for_each_nested(attr, tb[TCA_MQPRIO_MIN_RATE64],
-					    rem) {
-				if (nla_type(attr) != TCA_MQPRIO_MIN_RATE64)
-					return -EINVAL;
-				if (i >= qopt->num_tc)
-					break;
-				priv->min_rate[i] = *(u64 *)nla_data(attr);
-				i++;
-			}
-			priv->flags |= TC_MQPRIO_F_MIN_RATE;
-		}
-
-		if (tb[TCA_MQPRIO_MAX_RATE64]) {
-			if (priv->shaper != TC_MQPRIO_SHAPER_BW_RATE)
-				return -EINVAL;
-			i = 0;
-			nla_for_each_nested(attr, tb[TCA_MQPRIO_MAX_RATE64],
-					    rem) {
-				if (nla_type(attr) != TCA_MQPRIO_MAX_RATE64)
-					return -EINVAL;
-				if (i >= qopt->num_tc)
-					break;
-				priv->max_rate[i] = *(u64 *)nla_data(attr);
-				i++;
-			}
-			priv->flags |= TC_MQPRIO_F_MAX_RATE;
-		}
 	}
 
 	/* pre-allocate qdisc, attachment can't fail */
-- 
2.39.2

[PATCH 6.1 110/228] net/sched: mqprio: add extack to mqprio_parse_nlattr()

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit 57f21bf85400abadac0cb2a4db5de1d663f8863f ]

Netlink attribute parsing in mqprio is a minesweeper game, with many
options having the possibility of being passed incorrectly and the user
being none the wiser.

Try to make errors less sour by giving user space some information
regarding what went wrong.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 6c58c8816abb ("net/sched: mqprio: Add length check for TCA_MQPRIO_{MAX/MIN}_RATE64")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/sch_mqprio.c | 30 +++++++++++++++++++++++-------
 1 file changed, 23 insertions(+), 7 deletions(-)

diff --git a/net/sched/sch_mqprio.c b/net/sched/sch_mqprio.c
index 166b22601e60f..1ab20d43c50b0 100644
--- a/net/sched/sch_mqprio.c
+++ b/net/sched/sch_mqprio.c
@@ -131,7 +131,8 @@ static int parse_attr(struct nlattr *tb[], int maxtype, struct nlattr *nla,
 }
 
 static int mqprio_parse_nlattr(struct Qdisc *sch, struct tc_mqprio_qopt *qopt,
-			       struct nlattr *opt)
+			       struct nlattr *opt,
+			       struct netlink_ext_ack *extack)
 {
 	struct mqprio_sched *priv = qdisc_priv(sch);
 	struct nlattr *tb[TCA_MQPRIO_MAX + 1];
@@ -143,8 +144,11 @@ static int mqprio_parse_nlattr(struct Qdisc *sch, struct tc_mqprio_qopt *qopt,
 	if (err < 0)
 		return err;
 
-	if (!qopt->hw)
+	if (!qopt->hw) {
+		NL_SET_ERR_MSG(extack,
+			       "mqprio TCA_OPTIONS can only contain netlink attributes in hardware mode");
 		return -EINVAL;
+	}
 
 	if (tb[TCA_MQPRIO_MODE]) {
 		priv->flags |= TC_MQPRIO_F_MODE;
@@ -157,13 +161,19 @@ static int mqprio_parse_nlattr(struct Qdisc *sch, struct tc_mqprio_qopt *qopt,
 	}
 
 	if (tb[TCA_MQPRIO_MIN_RATE64]) {
-		if (priv->shaper != TC_MQPRIO_SHAPER_BW_RATE)
+		if (priv->shaper != TC_MQPRIO_SHAPER_BW_RATE) {
+			NL_SET_ERR_MSG_ATTR(extack, tb[TCA_MQPRIO_MIN_RATE64],
+					    "min_rate accepted only when shaper is in bw_rlimit mode");
 			return -EINVAL;
+		}
 		i = 0;
 		nla_for_each_nested(attr, tb[TCA_MQPRIO_MIN_RATE64],
 				    rem) {
-			if (nla_type(attr) != TCA_MQPRIO_MIN_RATE64)
+			if (nla_type(attr) != TCA_MQPRIO_MIN_RATE64) {
+				NL_SET_ERR_MSG_ATTR(extack, attr,
+						    "Attribute type expected to be TCA_MQPRIO_MIN_RATE64");
 				return -EINVAL;
+			}
 			if (i >= qopt->num_tc)
 				break;
 			priv->min_rate[i] = *(u64 *)nla_data(attr);
@@ -173,13 +183,19 @@ static int mqprio_parse_nlattr(struct Qdisc *sch, struct tc_mqprio_qopt *qopt,
 	}
 
 	if (tb[TCA_MQPRIO_MAX_RATE64]) {
-		if (priv->shaper != TC_MQPRIO_SHAPER_BW_RATE)
+		if (priv->shaper != TC_MQPRIO_SHAPER_BW_RATE) {
+			NL_SET_ERR_MSG_ATTR(extack, tb[TCA_MQPRIO_MAX_RATE64],
+					    "max_rate accepted only when shaper is in bw_rlimit mode");
 			return -EINVAL;
+		}
 		i = 0;
 		nla_for_each_nested(attr, tb[TCA_MQPRIO_MAX_RATE64],
 				    rem) {
-			if (nla_type(attr) != TCA_MQPRIO_MAX_RATE64)
+			if (nla_type(attr) != TCA_MQPRIO_MAX_RATE64) {
+				NL_SET_ERR_MSG_ATTR(extack, attr,
+						    "Attribute type expected to be TCA_MQPRIO_MAX_RATE64");
 				return -EINVAL;
+			}
 			if (i >= qopt->num_tc)
 				break;
 			priv->max_rate[i] = *(u64 *)nla_data(attr);
@@ -224,7 +240,7 @@ static int mqprio_init(struct Qdisc *sch, struct nlattr *opt,
 
 	len = nla_len(opt) - NLA_ALIGN(sizeof(*qopt));
 	if (len > 0) {
-		err = mqprio_parse_nlattr(sch, qopt, opt);
+		err = mqprio_parse_nlattr(sch, qopt, opt, extack);
 		if (err)
 			return err;
 	}
-- 
2.39.2

[PATCH 6.1 111/228] net/sched: mqprio: Add length check for TCA_MQPRIO_{MAX/MIN}_RATE64

[Greg Kroah-Hartman]

From: Lin Ma <linma@zju.edu.cn>

[ Upstream commit 6c58c8816abb7b93b21fa3b1d0c1726402e5e568 ]

The nla_for_each_nested parsing in function mqprio_parse_nlattr() does
not check the length of the nested attribute. This can lead to an
out-of-attribute read and allow a malformed nlattr (e.g., length 0) to
be viewed as 8 byte integer and passed to priv->max_rate/min_rate.

This patch adds the check based on nla_len() when check the nla_type(),
which ensures that the length of these two attribute must equals
sizeof(u64).

Fixes: 4e8b86c06269 ("mqprio: Introduce new hardware offload mode and shaper in mqprio")
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20230725024227.426561-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/sch_mqprio.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/net/sched/sch_mqprio.c b/net/sched/sch_mqprio.c
index 1ab20d43c50b0..b99e0fe0229cf 100644
--- a/net/sched/sch_mqprio.c
+++ b/net/sched/sch_mqprio.c
@@ -174,6 +174,13 @@ static int mqprio_parse_nlattr(struct Qdisc *sch, struct tc_mqprio_qopt *qopt,
 						    "Attribute type expected to be TCA_MQPRIO_MIN_RATE64");
 				return -EINVAL;
 			}
+
+			if (nla_len(attr) != sizeof(u64)) {
+				NL_SET_ERR_MSG_ATTR(extack, attr,
+						    "Attribute TCA_MQPRIO_MIN_RATE64 expected to have 8 bytes length");
+				return -EINVAL;
+			}
+
 			if (i >= qopt->num_tc)
 				break;
 			priv->min_rate[i] = *(u64 *)nla_data(attr);
@@ -196,6 +203,13 @@ static int mqprio_parse_nlattr(struct Qdisc *sch, struct tc_mqprio_qopt *qopt,
 						    "Attribute type expected to be TCA_MQPRIO_MAX_RATE64");
 				return -EINVAL;
 			}
+
+			if (nla_len(attr) != sizeof(u64)) {
+				NL_SET_ERR_MSG_ATTR(extack, attr,
+						    "Attribute TCA_MQPRIO_MAX_RATE64 expected to have 8 bytes length");
+				return -EINVAL;
+			}
+
 			if (i >= qopt->num_tc)
 				break;
 			priv->max_rate[i] = *(u64 *)nla_data(attr);
-- 
2.39.2

[PATCH 6.1 112/228] benet: fix return value check in be_lancer_xmit_workarounds()

[Greg Kroah-Hartman]

From: Yuanjun Gong <ruc_gongyuanjun@163.com>

[ Upstream commit 5c85f7065718a949902b238a6abd8fc907c5d3e0 ]

in be_lancer_xmit_workarounds(), it should go to label 'tx_drop'
if an unexpected value is returned by pskb_trim().

Fixes: 93040ae5cc8d ("be2net: Fix to trim skb for padded vlan packets to workaround an ASIC Bug")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Link: https://lore.kernel.org/r/20230725032726.15002-1-ruc_gongyuanjun@163.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/emulex/benet/be_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 5d39df8452653..b12152e2fca0a 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -1139,7 +1139,8 @@ static struct sk_buff *be_lancer_xmit_workarounds(struct be_adapter *adapter,
 	    (lancer_chip(adapter) || BE3_chip(adapter) ||
 	     skb_vlan_tag_present(skb)) && is_ipv4_pkt(skb)) {
 		ip = (struct iphdr *)ip_hdr(skb);
-		pskb_trim(skb, eth_hdr_len + ntohs(ip->tot_len));
+		if (unlikely(pskb_trim(skb, eth_hdr_len + ntohs(ip->tot_len))))
+			goto tx_drop;
 	}
 
 	/* If vlan tag is already inlined in the packet, skip HW VLAN
-- 
2.39.2

[PATCH 6.1 113/228] tipc: check return value of pskb_trim()

[Greg Kroah-Hartman]

From: Yuanjun Gong <ruc_gongyuanjun@163.com>

[ Upstream commit e46e06ffc6d667a89b979701288e2264f45e6a7b ]

goto free_skb if an unexpected result is returned by pskb_tirm()
in tipc_crypto_rcv_complete().

Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/20230725064810.5820-1-ruc_gongyuanjun@163.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/tipc/crypto.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/tipc/crypto.c b/net/tipc/crypto.c
index d67440de011e7..2b236d95a6469 100644
--- a/net/tipc/crypto.c
+++ b/net/tipc/crypto.c
@@ -1960,7 +1960,8 @@ static void tipc_crypto_rcv_complete(struct net *net, struct tipc_aead *aead,
 
 	skb_reset_network_header(*skb);
 	skb_pull(*skb, tipc_ehdr_size(ehdr));
-	pskb_trim(*skb, (*skb)->len - aead->authsize);
+	if (pskb_trim(*skb, (*skb)->len - aead->authsize))
+		goto free_skb;
 
 	/* Validate TIPCv2 message */
 	if (unlikely(!tipc_msg_validate(skb))) {
-- 
2.39.2

[PATCH 6.1 114/228] tipc: stop tipc crypto on failure in tipc_node_create

[Greg Kroah-Hartman]

From: Fedor Pchelkin <pchelkin@ispras.ru>

[ Upstream commit de52e17326c3e9a719c9ead4adb03467b8fae0ef ]

If tipc_link_bc_create() fails inside tipc_node_create() for a newly
allocated tipc node then we should stop its tipc crypto and free the
resources allocated with a call to tipc_crypto_start().

As the node ref is initialized to one to that point, just put the ref on
tipc_link_bc_create() error case that would lead to tipc_node_free() be
eventually executed and properly clean the node and its crypto resources.

Found by Linux Verification Center (linuxtesting.org).

Fixes: cb8092d70a6f ("tipc: move bc link creation back to tipc_node_create")
Suggested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20230725214628.25246-1-pchelkin@ispras.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/tipc/node.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/tipc/node.c b/net/tipc/node.c
index 5e000fde80676..a9c5b6594889b 100644
--- a/net/tipc/node.c
+++ b/net/tipc/node.c
@@ -583,7 +583,7 @@ struct tipc_node *tipc_node_create(struct net *net, u32 addr, u8 *peer_id,
 				 n->capabilities, &n->bc_entry.inputq1,
 				 &n->bc_entry.namedq, snd_l, &n->bc_entry.link)) {
 		pr_warn("Broadcast rcv link creation failed, no memory\n");
-		kfree(n);
+		tipc_node_put(n);
 		n = NULL;
 		goto exit;
 	}
-- 
2.39.2

[PATCH 6.1 115/228] RDMA/mlx4: Make check for invalid flags stricter

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@linaro.org>

[ Upstream commit d64b1ee12a168030fbb3e0aebf7bce49e9a07589 ]

This code is trying to ensure that only the flags specified in the list
are allowed.  The problem is that ucmd->rx_hash_fields_mask is a u64 and
the flags are an enum which is treated as a u32 in this context.  That
means the test doesn't check whether the highest 32 bits are zero.

Fixes: 4d02ebd9bbbd ("IB/mlx4: Fix RSS hash fields restrictions")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/233ed975-982d-422a-b498-410f71d8a101@moroto.mountain
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mlx4/qp.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 488c906c0432c..ac479e81ddee8 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -530,15 +530,15 @@ static int set_qp_rss(struct mlx4_ib_dev *dev, struct mlx4_ib_rss *rss_ctx,
 		return (-EOPNOTSUPP);
 	}
 
-	if (ucmd->rx_hash_fields_mask & ~(MLX4_IB_RX_HASH_SRC_IPV4	|
-					  MLX4_IB_RX_HASH_DST_IPV4	|
-					  MLX4_IB_RX_HASH_SRC_IPV6	|
-					  MLX4_IB_RX_HASH_DST_IPV6	|
-					  MLX4_IB_RX_HASH_SRC_PORT_TCP	|
-					  MLX4_IB_RX_HASH_DST_PORT_TCP	|
-					  MLX4_IB_RX_HASH_SRC_PORT_UDP	|
-					  MLX4_IB_RX_HASH_DST_PORT_UDP  |
-					  MLX4_IB_RX_HASH_INNER)) {
+	if (ucmd->rx_hash_fields_mask & ~(u64)(MLX4_IB_RX_HASH_SRC_IPV4	|
+					       MLX4_IB_RX_HASH_DST_IPV4	|
+					       MLX4_IB_RX_HASH_SRC_IPV6	|
+					       MLX4_IB_RX_HASH_DST_IPV6	|
+					       MLX4_IB_RX_HASH_SRC_PORT_TCP |
+					       MLX4_IB_RX_HASH_DST_PORT_TCP |
+					       MLX4_IB_RX_HASH_SRC_PORT_UDP |
+					       MLX4_IB_RX_HASH_DST_PORT_UDP |
+					       MLX4_IB_RX_HASH_INNER)) {
 		pr_debug("RX Hash fields_mask has unsupported mask (0x%llx)\n",
 			 ucmd->rx_hash_fields_mask);
 		return (-EOPNOTSUPP);
-- 
2.40.1

[PATCH 6.1 116/228] drm/msm/dpu: drop enum dpu_core_perf_data_bus_id

[Greg Kroah-Hartman]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit e8383f5cf1b3573ce140a80bfbfd809278ab16d6 ]

Drop the leftover of bus-client -> interconnect conversion, the enum
dpu_core_perf_data_bus_id.

Fixes: cb88482e2570 ("drm/msm/dpu: clean up references of DPU custom bus scaling")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/546048/
Link: https://lore.kernel.org/r/20230707193942.3806526-2-dmitry.baryshkov@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h | 13 -------------
 1 file changed, 13 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
index e3795995e1454..29bb8ee2bc266 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
@@ -14,19 +14,6 @@
 
 #define	DPU_PERF_DEFAULT_MAX_CORE_CLK_RATE	412500000
 
-/**
- * enum dpu_core_perf_data_bus_id - data bus identifier
- * @DPU_CORE_PERF_DATA_BUS_ID_MNOC: DPU/MNOC data bus
- * @DPU_CORE_PERF_DATA_BUS_ID_LLCC: MNOC/LLCC data bus
- * @DPU_CORE_PERF_DATA_BUS_ID_EBI: LLCC/EBI data bus
- */
-enum dpu_core_perf_data_bus_id {
-	DPU_CORE_PERF_DATA_BUS_ID_MNOC,
-	DPU_CORE_PERF_DATA_BUS_ID_LLCC,
-	DPU_CORE_PERF_DATA_BUS_ID_EBI,
-	DPU_CORE_PERF_DATA_BUS_ID_MAX,
-};
-
 /**
  * struct dpu_core_perf_params - definition of performance parameters
  * @max_per_pipe_ib: maximum instantaneous bandwidth request
-- 
2.40.1

[PATCH 6.1 117/228] drm/msm/adreno: Fix snapshot BINDLESS_DATA size

[Greg Kroah-Hartman]

From: Rob Clark <robdclark@chromium.org>

[ Upstream commit bd846ceee9c478d0397428f02696602ba5eb264a ]

The incorrect size was causing "CP | AHB bus error" when snapshotting
the GPU state on a6xx gen4 (a660 family).

Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/26
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Fixes: 1707add81551 ("drm/msm/a6xx: Add a6xx gpu state")
Patchwork: https://patchwork.freedesktop.org/patch/546763/
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/adreno/a6xx_gpu_state.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu_state.h b/drivers/gpu/drm/msm/adreno/a6xx_gpu_state.h
index 2fb58b7098e4b..3bd2065a9d30e 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gpu_state.h
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu_state.h
@@ -200,7 +200,7 @@ static const struct a6xx_shader_block {
 	SHADER(A6XX_SP_LB_3_DATA, 0x800),
 	SHADER(A6XX_SP_LB_4_DATA, 0x800),
 	SHADER(A6XX_SP_LB_5_DATA, 0x200),
-	SHADER(A6XX_SP_CB_BINDLESS_DATA, 0x2000),
+	SHADER(A6XX_SP_CB_BINDLESS_DATA, 0x800),
 	SHADER(A6XX_SP_CB_LEGACY_DATA, 0x280),
 	SHADER(A6XX_SP_UAV_DATA, 0x80),
 	SHADER(A6XX_SP_INST_TAG, 0x80),
-- 
2.40.1

[PATCH 6.1 118/228] RDMA/irdma: Add missing read barriers

[Greg Kroah-Hartman]

From: Shiraz Saleem <shiraz.saleem@intel.com>

[ Upstream commit 4984eb51453ff7eddee9e5ce816145be39c0ec5c ]

On code inspection, there are many instances in the driver where
CEQE and AEQE fields written to by HW are read without guaranteeing
that the polarity bit has been read and checked first.

Add a read barrier to avoid reordering of loads on the CEQE/AEQE fields
prior to checking the polarity bit.

Fixes: 3f49d6842569 ("RDMA/irdma: Implement HW Admin Queue OPs")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230711175253.1289-2-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/irdma/ctrl.c | 9 ++++++++-
 drivers/infiniband/hw/irdma/puda.c | 6 ++++++
 drivers/infiniband/hw/irdma/uk.c   | 3 +++
 3 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/irdma/ctrl.c b/drivers/infiniband/hw/irdma/ctrl.c
index a41e0d21143ae..d86d7ca9cee4a 100644
--- a/drivers/infiniband/hw/irdma/ctrl.c
+++ b/drivers/infiniband/hw/irdma/ctrl.c
@@ -3344,6 +3344,9 @@ int irdma_sc_ccq_get_cqe_info(struct irdma_sc_cq *ccq,
 	if (polarity != ccq->cq_uk.polarity)
 		return -ENOENT;
 
+	/* Ensure CEQE contents are read after valid bit is checked */
+	dma_rmb();
+
 	get_64bit_val(cqe, 8, &qp_ctx);
 	cqp = (struct irdma_sc_cqp *)(unsigned long)qp_ctx;
 	info->error = (bool)FIELD_GET(IRDMA_CQ_ERROR, temp);
@@ -3990,13 +3993,17 @@ int irdma_sc_get_next_aeqe(struct irdma_sc_aeq *aeq,
 	u8 polarity;
 
 	aeqe = IRDMA_GET_CURRENT_AEQ_ELEM(aeq);
-	get_64bit_val(aeqe, 0, &compl_ctx);
 	get_64bit_val(aeqe, 8, &temp);
 	polarity = (u8)FIELD_GET(IRDMA_AEQE_VALID, temp);
 
 	if (aeq->polarity != polarity)
 		return -ENOENT;
 
+	/* Ensure AEQE contents are read after valid bit is checked */
+	dma_rmb();
+
+	get_64bit_val(aeqe, 0, &compl_ctx);
+
 	print_hex_dump_debug("WQE: AEQ_ENTRY WQE", DUMP_PREFIX_OFFSET, 16, 8,
 			     aeqe, 16, false);
 
diff --git a/drivers/infiniband/hw/irdma/puda.c b/drivers/infiniband/hw/irdma/puda.c
index 4ec9639f1bdbf..562531712ea44 100644
--- a/drivers/infiniband/hw/irdma/puda.c
+++ b/drivers/infiniband/hw/irdma/puda.c
@@ -230,6 +230,9 @@ static int irdma_puda_poll_info(struct irdma_sc_cq *cq,
 	if (valid_bit != cq_uk->polarity)
 		return -ENOENT;
 
+	/* Ensure CQE contents are read after valid bit is checked */
+	dma_rmb();
+
 	if (cq->dev->hw_attrs.uk_attrs.hw_rev >= IRDMA_GEN_2)
 		ext_valid = (bool)FIELD_GET(IRDMA_CQ_EXTCQE, qword3);
 
@@ -243,6 +246,9 @@ static int irdma_puda_poll_info(struct irdma_sc_cq *cq,
 		if (polarity != cq_uk->polarity)
 			return -ENOENT;
 
+		/* Ensure ext CQE contents are read after ext valid bit is checked */
+		dma_rmb();
+
 		IRDMA_RING_MOVE_HEAD_NOCHECK(cq_uk->cq_ring);
 		if (!IRDMA_RING_CURRENT_HEAD(cq_uk->cq_ring))
 			cq_uk->polarity = !cq_uk->polarity;
diff --git a/drivers/infiniband/hw/irdma/uk.c b/drivers/infiniband/hw/irdma/uk.c
index dd428d915c175..ea2c07751245a 100644
--- a/drivers/infiniband/hw/irdma/uk.c
+++ b/drivers/infiniband/hw/irdma/uk.c
@@ -1527,6 +1527,9 @@ void irdma_uk_clean_cq(void *q, struct irdma_cq_uk *cq)
 		if (polarity != temp)
 			break;
 
+		/* Ensure CQE contents are read after valid bit is checked */
+		dma_rmb();
+
 		get_64bit_val(cqe, 8, &comp_ctx);
 		if ((void *)(unsigned long)comp_ctx == q)
 			set_64bit_val(cqe, 8, 0);
-- 
2.40.1

[PATCH 6.1 119/228] RDMA/irdma: Fix data race on CQP completion stats

[Greg Kroah-Hartman]

From: Shiraz Saleem <shiraz.saleem@intel.com>

[ Upstream commit f2c3037811381f9149243828c7eb9a1631df9f9c ]

CQP completion statistics is read lockesly in irdma_wait_event and
irdma_check_cqp_progress while it can be updated in the completion
thread irdma_sc_ccq_get_cqe_info on another CPU as KCSAN reports.

Make completion statistics an atomic variable to reflect coherent updates
to it. This will also avoid load/store tearing logic bug potentially
possible by compiler optimizations.

[77346.170861] BUG: KCSAN: data-race in irdma_handle_cqp_op [irdma] / irdma_sc_ccq_get_cqe_info [irdma]

[77346.171383] write to 0xffff8a3250b108e0 of 8 bytes by task 9544 on cpu 4:
[77346.171483]  irdma_sc_ccq_get_cqe_info+0x27a/0x370 [irdma]
[77346.171658]  irdma_cqp_ce_handler+0x164/0x270 [irdma]
[77346.171835]  cqp_compl_worker+0x1b/0x20 [irdma]
[77346.172009]  process_one_work+0x4d1/0xa40
[77346.172024]  worker_thread+0x319/0x700
[77346.172037]  kthread+0x180/0x1b0
[77346.172054]  ret_from_fork+0x22/0x30

[77346.172136] read to 0xffff8a3250b108e0 of 8 bytes by task 9838 on cpu 2:
[77346.172234]  irdma_handle_cqp_op+0xf4/0x4b0 [irdma]
[77346.172413]  irdma_cqp_aeq_cmd+0x75/0xa0 [irdma]
[77346.172592]  irdma_create_aeq+0x390/0x45a [irdma]
[77346.172769]  irdma_rt_init_hw.cold+0x212/0x85d [irdma]
[77346.172944]  irdma_probe+0x54f/0x620 [irdma]
[77346.173122]  auxiliary_bus_probe+0x66/0xa0
[77346.173137]  really_probe+0x140/0x540
[77346.173154]  __driver_probe_device+0xc7/0x220
[77346.173173]  driver_probe_device+0x5f/0x140
[77346.173190]  __driver_attach+0xf0/0x2c0
[77346.173208]  bus_for_each_dev+0xa8/0xf0
[77346.173225]  driver_attach+0x29/0x30
[77346.173240]  bus_add_driver+0x29c/0x2f0
[77346.173255]  driver_register+0x10f/0x1a0
[77346.173272]  __auxiliary_driver_register+0xbc/0x140
[77346.173287]  irdma_init_module+0x55/0x1000 [irdma]
[77346.173460]  do_one_initcall+0x7d/0x410
[77346.173475]  do_init_module+0x81/0x2c0
[77346.173491]  load_module+0x1232/0x12c0
[77346.173506]  __do_sys_finit_module+0x101/0x180
[77346.173522]  __x64_sys_finit_module+0x3c/0x50
[77346.173538]  do_syscall_64+0x39/0x90
[77346.173553]  entry_SYSCALL_64_after_hwframe+0x63/0xcd

[77346.173634] value changed: 0x0000000000000094 -> 0x0000000000000095

Fixes: 915cc7ac0f8e ("RDMA/irdma: Add miscellaneous utility definitions")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230711175253.1289-3-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/irdma/ctrl.c  | 22 +++++++-------
 drivers/infiniband/hw/irdma/defs.h  | 46 ++++++++++++++---------------
 drivers/infiniband/hw/irdma/type.h  |  2 ++
 drivers/infiniband/hw/irdma/utils.c |  2 +-
 4 files changed, 36 insertions(+), 36 deletions(-)

diff --git a/drivers/infiniband/hw/irdma/ctrl.c b/drivers/infiniband/hw/irdma/ctrl.c
index d86d7ca9cee4a..6544c9c60b7db 100644
--- a/drivers/infiniband/hw/irdma/ctrl.c
+++ b/drivers/infiniband/hw/irdma/ctrl.c
@@ -2693,13 +2693,13 @@ static int irdma_sc_cq_modify(struct irdma_sc_cq *cq,
  */
 void irdma_check_cqp_progress(struct irdma_cqp_timeout *timeout, struct irdma_sc_dev *dev)
 {
-	if (timeout->compl_cqp_cmds != dev->cqp_cmd_stats[IRDMA_OP_CMPL_CMDS]) {
-		timeout->compl_cqp_cmds = dev->cqp_cmd_stats[IRDMA_OP_CMPL_CMDS];
+	u64 completed_ops = atomic64_read(&dev->cqp->completed_ops);
+
+	if (timeout->compl_cqp_cmds != completed_ops) {
+		timeout->compl_cqp_cmds = completed_ops;
 		timeout->count = 0;
-	} else {
-		if (dev->cqp_cmd_stats[IRDMA_OP_REQ_CMDS] !=
-		    timeout->compl_cqp_cmds)
-			timeout->count++;
+	} else if (timeout->compl_cqp_cmds != dev->cqp->requested_ops) {
+		timeout->count++;
 	}
 }
 
@@ -2742,7 +2742,7 @@ static int irdma_cqp_poll_registers(struct irdma_sc_cqp *cqp, u32 tail,
 		if (newtail != tail) {
 			/* SUCCESS */
 			IRDMA_RING_MOVE_TAIL(cqp->sq_ring);
-			cqp->dev->cqp_cmd_stats[IRDMA_OP_CMPL_CMDS]++;
+			atomic64_inc(&cqp->completed_ops);
 			return 0;
 		}
 		udelay(cqp->dev->hw_attrs.max_sleep_count);
@@ -3102,8 +3102,8 @@ int irdma_sc_cqp_init(struct irdma_sc_cqp *cqp,
 	info->dev->cqp = cqp;
 
 	IRDMA_RING_INIT(cqp->sq_ring, cqp->sq_size);
-	cqp->dev->cqp_cmd_stats[IRDMA_OP_REQ_CMDS] = 0;
-	cqp->dev->cqp_cmd_stats[IRDMA_OP_CMPL_CMDS] = 0;
+	cqp->requested_ops = 0;
+	atomic64_set(&cqp->completed_ops, 0);
 	/* for the cqp commands backlog. */
 	INIT_LIST_HEAD(&cqp->dev->cqp_cmd_head);
 
@@ -3255,7 +3255,7 @@ __le64 *irdma_sc_cqp_get_next_send_wqe_idx(struct irdma_sc_cqp *cqp, u64 scratch
 	if (ret_code)
 		return NULL;
 
-	cqp->dev->cqp_cmd_stats[IRDMA_OP_REQ_CMDS]++;
+	cqp->requested_ops++;
 	if (!*wqe_idx)
 		cqp->polarity = !cqp->polarity;
 	wqe = cqp->sq_base[*wqe_idx].elem;
@@ -3381,7 +3381,7 @@ int irdma_sc_ccq_get_cqe_info(struct irdma_sc_cq *ccq,
 	dma_wmb(); /* make sure shadow area is updated before moving tail */
 
 	IRDMA_RING_MOVE_TAIL(cqp->sq_ring);
-	ccq->dev->cqp_cmd_stats[IRDMA_OP_CMPL_CMDS]++;
+	atomic64_inc(&cqp->completed_ops);
 
 	return ret_code;
 }
diff --git a/drivers/infiniband/hw/irdma/defs.h b/drivers/infiniband/hw/irdma/defs.h
index c1906cab5c8ad..ad54260cb58c9 100644
--- a/drivers/infiniband/hw/irdma/defs.h
+++ b/drivers/infiniband/hw/irdma/defs.h
@@ -190,32 +190,30 @@ enum irdma_cqp_op_type {
 	IRDMA_OP_MANAGE_VF_PBLE_BP		= 25,
 	IRDMA_OP_QUERY_FPM_VAL			= 26,
 	IRDMA_OP_COMMIT_FPM_VAL			= 27,
-	IRDMA_OP_REQ_CMDS			= 28,
-	IRDMA_OP_CMPL_CMDS			= 29,
-	IRDMA_OP_AH_CREATE			= 30,
-	IRDMA_OP_AH_MODIFY			= 31,
-	IRDMA_OP_AH_DESTROY			= 32,
-	IRDMA_OP_MC_CREATE			= 33,
-	IRDMA_OP_MC_DESTROY			= 34,
-	IRDMA_OP_MC_MODIFY			= 35,
-	IRDMA_OP_STATS_ALLOCATE			= 36,
-	IRDMA_OP_STATS_FREE			= 37,
-	IRDMA_OP_STATS_GATHER			= 38,
-	IRDMA_OP_WS_ADD_NODE			= 39,
-	IRDMA_OP_WS_MODIFY_NODE			= 40,
-	IRDMA_OP_WS_DELETE_NODE			= 41,
-	IRDMA_OP_WS_FAILOVER_START		= 42,
-	IRDMA_OP_WS_FAILOVER_COMPLETE		= 43,
-	IRDMA_OP_SET_UP_MAP			= 44,
-	IRDMA_OP_GEN_AE				= 45,
-	IRDMA_OP_QUERY_RDMA_FEATURES		= 46,
-	IRDMA_OP_ALLOC_LOCAL_MAC_ENTRY		= 47,
-	IRDMA_OP_ADD_LOCAL_MAC_ENTRY		= 48,
-	IRDMA_OP_DELETE_LOCAL_MAC_ENTRY		= 49,
-	IRDMA_OP_CQ_MODIFY			= 50,
+	IRDMA_OP_AH_CREATE			= 28,
+	IRDMA_OP_AH_MODIFY			= 29,
+	IRDMA_OP_AH_DESTROY			= 30,
+	IRDMA_OP_MC_CREATE			= 31,
+	IRDMA_OP_MC_DESTROY			= 32,
+	IRDMA_OP_MC_MODIFY			= 33,
+	IRDMA_OP_STATS_ALLOCATE			= 34,
+	IRDMA_OP_STATS_FREE			= 35,
+	IRDMA_OP_STATS_GATHER			= 36,
+	IRDMA_OP_WS_ADD_NODE			= 37,
+	IRDMA_OP_WS_MODIFY_NODE			= 38,
+	IRDMA_OP_WS_DELETE_NODE			= 39,
+	IRDMA_OP_WS_FAILOVER_START		= 40,
+	IRDMA_OP_WS_FAILOVER_COMPLETE		= 41,
+	IRDMA_OP_SET_UP_MAP			= 42,
+	IRDMA_OP_GEN_AE				= 43,
+	IRDMA_OP_QUERY_RDMA_FEATURES		= 44,
+	IRDMA_OP_ALLOC_LOCAL_MAC_ENTRY		= 45,
+	IRDMA_OP_ADD_LOCAL_MAC_ENTRY		= 46,
+	IRDMA_OP_DELETE_LOCAL_MAC_ENTRY		= 47,
+	IRDMA_OP_CQ_MODIFY			= 48,
 
 	/* Must be last entry*/
-	IRDMA_MAX_CQP_OPS			= 51,
+	IRDMA_MAX_CQP_OPS			= 49,
 };
 
 /* CQP SQ WQES */
diff --git a/drivers/infiniband/hw/irdma/type.h b/drivers/infiniband/hw/irdma/type.h
index 517d41a1c2894..d6cb94dc744c5 100644
--- a/drivers/infiniband/hw/irdma/type.h
+++ b/drivers/infiniband/hw/irdma/type.h
@@ -410,6 +410,8 @@ struct irdma_sc_cqp {
 	struct irdma_dcqcn_cc_params dcqcn_params;
 	__le64 *host_ctx;
 	u64 *scratch_array;
+	u64 requested_ops;
+	atomic64_t completed_ops;
 	u32 cqp_id;
 	u32 sq_size;
 	u32 hw_sq_size;
diff --git a/drivers/infiniband/hw/irdma/utils.c b/drivers/infiniband/hw/irdma/utils.c
index 7887230c867b1..90ca4a1b60c21 100644
--- a/drivers/infiniband/hw/irdma/utils.c
+++ b/drivers/infiniband/hw/irdma/utils.c
@@ -567,7 +567,7 @@ static int irdma_wait_event(struct irdma_pci_f *rf,
 	bool cqp_error = false;
 	int err_code = 0;
 
-	cqp_timeout.compl_cqp_cmds = rf->sc_dev.cqp_cmd_stats[IRDMA_OP_CMPL_CMDS];
+	cqp_timeout.compl_cqp_cmds = atomic64_read(&rf->sc_dev.cqp->completed_ops);
 	do {
 		irdma_cqp_ce_handler(rf, &rf->ccq.sc_cq);
 		if (wait_event_timeout(cqp_request->waitq,
-- 
2.40.1

[PATCH 6.1 120/228] RDMA/irdma: Fix data race on CQP request done

[Greg Kroah-Hartman]

From: Shiraz Saleem <shiraz.saleem@intel.com>

[ Upstream commit f0842bb3d38863777e3454da5653d80b5fde6321 ]

KCSAN detects a data race on cqp_request->request_done memory location
which is accessed locklessly in irdma_handle_cqp_op while being
updated in irdma_cqp_ce_handler.

Annotate lockless intent with READ_ONCE/WRITE_ONCE to avoid any
compiler optimizations like load fusing and/or KCSAN warning.

[222808.417128] BUG: KCSAN: data-race in irdma_cqp_ce_handler [irdma] / irdma_wait_event [irdma]

[222808.417532] write to 0xffff8e44107019dc of 1 bytes by task 29658 on cpu 5:
[222808.417610]  irdma_cqp_ce_handler+0x21e/0x270 [irdma]
[222808.417725]  cqp_compl_worker+0x1b/0x20 [irdma]
[222808.417827]  process_one_work+0x4d1/0xa40
[222808.417835]  worker_thread+0x319/0x700
[222808.417842]  kthread+0x180/0x1b0
[222808.417852]  ret_from_fork+0x22/0x30

[222808.417918] read to 0xffff8e44107019dc of 1 bytes by task 29688 on cpu 1:
[222808.417995]  irdma_wait_event+0x1e2/0x2c0 [irdma]
[222808.418099]  irdma_handle_cqp_op+0xae/0x170 [irdma]
[222808.418202]  irdma_cqp_cq_destroy_cmd+0x70/0x90 [irdma]
[222808.418308]  irdma_puda_dele_rsrc+0x46d/0x4d0 [irdma]
[222808.418411]  irdma_rt_deinit_hw+0x179/0x1d0 [irdma]
[222808.418514]  irdma_ib_dealloc_device+0x11/0x40 [irdma]
[222808.418618]  ib_dealloc_device+0x2a/0x120 [ib_core]
[222808.418823]  __ib_unregister_device+0xde/0x100 [ib_core]
[222808.418981]  ib_unregister_device+0x22/0x40 [ib_core]
[222808.419142]  irdma_ib_unregister_device+0x70/0x90 [irdma]
[222808.419248]  i40iw_close+0x6f/0xc0 [irdma]
[222808.419352]  i40e_client_device_unregister+0x14a/0x180 [i40e]
[222808.419450]  i40iw_remove+0x21/0x30 [irdma]
[222808.419554]  auxiliary_bus_remove+0x31/0x50
[222808.419563]  device_remove+0x69/0xb0
[222808.419572]  device_release_driver_internal+0x293/0x360
[222808.419582]  driver_detach+0x7c/0xf0
[222808.419592]  bus_remove_driver+0x8c/0x150
[222808.419600]  driver_unregister+0x45/0x70
[222808.419610]  auxiliary_driver_unregister+0x16/0x30
[222808.419618]  irdma_exit_module+0x18/0x1e [irdma]
[222808.419733]  __do_sys_delete_module.constprop.0+0x1e2/0x310
[222808.419745]  __x64_sys_delete_module+0x1b/0x30
[222808.419755]  do_syscall_64+0x39/0x90
[222808.419763]  entry_SYSCALL_64_after_hwframe+0x63/0xcd

[222808.419829] value changed: 0x01 -> 0x03

Fixes: 915cc7ac0f8e ("RDMA/irdma: Add miscellaneous utility definitions")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230711175253.1289-4-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/irdma/hw.c    | 2 +-
 drivers/infiniband/hw/irdma/main.h  | 2 +-
 drivers/infiniband/hw/irdma/utils.c | 6 +++---
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/infiniband/hw/irdma/hw.c b/drivers/infiniband/hw/irdma/hw.c
index 43dfa4761f069..05a403f3ffd40 100644
--- a/drivers/infiniband/hw/irdma/hw.c
+++ b/drivers/infiniband/hw/irdma/hw.c
@@ -2068,7 +2068,7 @@ void irdma_cqp_ce_handler(struct irdma_pci_f *rf, struct irdma_sc_cq *cq)
 			cqp_request->compl_info.error = info.error;
 
 			if (cqp_request->waiting) {
-				cqp_request->request_done = true;
+				WRITE_ONCE(cqp_request->request_done, true);
 				wake_up(&cqp_request->waitq);
 				irdma_put_cqp_request(&rf->cqp, cqp_request);
 			} else {
diff --git a/drivers/infiniband/hw/irdma/main.h b/drivers/infiniband/hw/irdma/main.h
index 65e966ad34530..e64205839d039 100644
--- a/drivers/infiniband/hw/irdma/main.h
+++ b/drivers/infiniband/hw/irdma/main.h
@@ -159,8 +159,8 @@ struct irdma_cqp_request {
 	void (*callback_fcn)(struct irdma_cqp_request *cqp_request);
 	void *param;
 	struct irdma_cqp_compl_info compl_info;
+	bool request_done; /* READ/WRITE_ONCE macros operate on it */
 	bool waiting:1;
-	bool request_done:1;
 	bool dynamic:1;
 };
 
diff --git a/drivers/infiniband/hw/irdma/utils.c b/drivers/infiniband/hw/irdma/utils.c
index 90ca4a1b60c21..8c7617776e58b 100644
--- a/drivers/infiniband/hw/irdma/utils.c
+++ b/drivers/infiniband/hw/irdma/utils.c
@@ -481,7 +481,7 @@ void irdma_free_cqp_request(struct irdma_cqp *cqp,
 	if (cqp_request->dynamic) {
 		kfree(cqp_request);
 	} else {
-		cqp_request->request_done = false;
+		WRITE_ONCE(cqp_request->request_done, false);
 		cqp_request->callback_fcn = NULL;
 		cqp_request->waiting = false;
 
@@ -515,7 +515,7 @@ irdma_free_pending_cqp_request(struct irdma_cqp *cqp,
 {
 	if (cqp_request->waiting) {
 		cqp_request->compl_info.error = true;
-		cqp_request->request_done = true;
+		WRITE_ONCE(cqp_request->request_done, true);
 		wake_up(&cqp_request->waitq);
 	}
 	wait_event_timeout(cqp->remove_wq,
@@ -571,7 +571,7 @@ static int irdma_wait_event(struct irdma_pci_f *rf,
 	do {
 		irdma_cqp_ce_handler(rf, &rf->ccq.sc_cq);
 		if (wait_event_timeout(cqp_request->waitq,
-				       cqp_request->request_done,
+				       READ_ONCE(cqp_request->request_done),
 				       msecs_to_jiffies(CQP_COMPL_WAIT_TIME_MS)))
 			break;
 
-- 
2.40.1

[PATCH 6.1 121/228] RDMA/mthca: Fix crash when polling CQ for shared QPs

[Greg Kroah-Hartman]

From: Thomas Bogendoerfer <tbogendoerfer@suse.de>

[ Upstream commit dc52aadbc1849cbe3fcf6bc54d35f6baa396e0a1 ]

Commit 21c2fe94abb2 ("RDMA/mthca: Combine special QP struct with mthca QP")
introduced a new struct mthca_sqp which doesn't contain struct mthca_qp
any longer. Placing a pointer of this new struct into qptable leads
to crashes, because mthca_poll_one() expects a qp pointer. Fix this
by putting the correct pointer into qptable.

Fixes: 21c2fe94abb2 ("RDMA/mthca: Combine special QP struct with mthca QP")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Link: https://lore.kernel.org/r/20230713141658.9426-1-tbogendoerfer@suse.de
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mthca/mthca_qp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c
index 69bba0ef4a5df..53f43649f7d08 100644
--- a/drivers/infiniband/hw/mthca/mthca_qp.c
+++ b/drivers/infiniband/hw/mthca/mthca_qp.c
@@ -1393,7 +1393,7 @@ int mthca_alloc_sqp(struct mthca_dev *dev,
 	if (mthca_array_get(&dev->qp_table.qp, mqpn))
 		err = -EBUSY;
 	else
-		mthca_array_set(&dev->qp_table.qp, mqpn, qp->sqp);
+		mthca_array_set(&dev->qp_table.qp, mqpn, qp);
 	spin_unlock_irq(&dev->qp_table.lock);
 
 	if (err)
-- 
2.40.1

[PATCH 6.1 122/228] RDMA/bnxt_re: Prevent handling any completions after qp destroy

[Greg Kroah-Hartman]

From: Kashyap Desai <kashyap.desai@broadcom.com>

[ Upstream commit b5bbc6551297447d3cca55cf907079e206e9cd82 ]

HW may generate completions that indicates QP is destroyed.
Driver should not be scheduling any more completion handlers
for this QP, after the QP is destroyed. Since CQs are active
during the QP destroy, driver may still schedule completion
handlers. This can cause a race where the destroy_cq and poll_cq
running simultaneously.

Snippet of kernel panic while doing bnxt_re driver load unload in loop.
This indicates a poll after the CQ is freed. 

[77786.481636] Call Trace:
[77786.481640]  <TASK>
[77786.481644]  bnxt_re_poll_cq+0x14a/0x620 [bnxt_re]
[77786.481658]  ? kvm_clock_read+0x14/0x30
[77786.481693]  __ib_process_cq+0x57/0x190 [ib_core]
[77786.481728]  ib_cq_poll_work+0x26/0x80 [ib_core]
[77786.481761]  process_one_work+0x1e5/0x3f0
[77786.481768]  worker_thread+0x50/0x3a0
[77786.481785]  ? __pfx_worker_thread+0x10/0x10
[77786.481790]  kthread+0xe2/0x110
[77786.481794]  ? __pfx_kthread+0x10/0x10
[77786.481797]  ret_from_fork+0x2c/0x50

To avoid this, complete all completion handlers before returning the
destroy QP. If free_cq is called soon after destroy_qp,  IB stack
will cancel the CQ work before invoking the destroy_cq verb and
this will prevent any race mentioned.

Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1689322969-25402-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/bnxt_re/ib_verbs.c | 12 ++++++++++++
 drivers/infiniband/hw/bnxt_re/qplib_fp.c | 18 ++++++++++++++++++
 drivers/infiniband/hw/bnxt_re/qplib_fp.h |  1 +
 3 files changed, 31 insertions(+)

diff --git a/drivers/infiniband/hw/bnxt_re/ib_verbs.c b/drivers/infiniband/hw/bnxt_re/ib_verbs.c
index 94222de1d3719..4ed8814efde6f 100644
--- a/drivers/infiniband/hw/bnxt_re/ib_verbs.c
+++ b/drivers/infiniband/hw/bnxt_re/ib_verbs.c
@@ -796,7 +796,10 @@ static int bnxt_re_destroy_gsi_sqp(struct bnxt_re_qp *qp)
 int bnxt_re_destroy_qp(struct ib_qp *ib_qp, struct ib_udata *udata)
 {
 	struct bnxt_re_qp *qp = container_of(ib_qp, struct bnxt_re_qp, ib_qp);
+	struct bnxt_qplib_qp *qplib_qp = &qp->qplib_qp;
 	struct bnxt_re_dev *rdev = qp->rdev;
+	struct bnxt_qplib_nq *scq_nq = NULL;
+	struct bnxt_qplib_nq *rcq_nq = NULL;
 	unsigned int flags;
 	int rc;
 
@@ -830,6 +833,15 @@ int bnxt_re_destroy_qp(struct ib_qp *ib_qp, struct ib_udata *udata)
 	ib_umem_release(qp->rumem);
 	ib_umem_release(qp->sumem);
 
+	/* Flush all the entries of notification queue associated with
+	 * given qp.
+	 */
+	scq_nq = qplib_qp->scq->nq;
+	rcq_nq = qplib_qp->rcq->nq;
+	bnxt_re_synchronize_nq(scq_nq);
+	if (scq_nq != rcq_nq)
+		bnxt_re_synchronize_nq(rcq_nq);
+
 	return 0;
 }
 
diff --git a/drivers/infiniband/hw/bnxt_re/qplib_fp.c b/drivers/infiniband/hw/bnxt_re/qplib_fp.c
index 74d56900387a1..1011293547ef7 100644
--- a/drivers/infiniband/hw/bnxt_re/qplib_fp.c
+++ b/drivers/infiniband/hw/bnxt_re/qplib_fp.c
@@ -387,6 +387,24 @@ static void bnxt_qplib_service_nq(struct tasklet_struct *t)
 	spin_unlock_bh(&hwq->lock);
 }
 
+/* bnxt_re_synchronize_nq - self polling notification queue.
+ * @nq      -     notification queue pointer
+ *
+ * This function will start polling entries of a given notification queue
+ * for all pending  entries.
+ * This function is useful to synchronize notification entries while resources
+ * are going away.
+ */
+
+void bnxt_re_synchronize_nq(struct bnxt_qplib_nq *nq)
+{
+	int budget = nq->budget;
+
+	nq->budget = nq->hwq.max_elements;
+	bnxt_qplib_service_nq(&nq->nq_tasklet);
+	nq->budget = budget;
+}
+
 static irqreturn_t bnxt_qplib_nq_irq(int irq, void *dev_instance)
 {
 	struct bnxt_qplib_nq *nq = dev_instance;
diff --git a/drivers/infiniband/hw/bnxt_re/qplib_fp.h b/drivers/infiniband/hw/bnxt_re/qplib_fp.h
index f859710f9a7f4..49d89c0808275 100644
--- a/drivers/infiniband/hw/bnxt_re/qplib_fp.h
+++ b/drivers/infiniband/hw/bnxt_re/qplib_fp.h
@@ -548,6 +548,7 @@ int bnxt_qplib_process_flush_list(struct bnxt_qplib_cq *cq,
 				  struct bnxt_qplib_cqe *cqe,
 				  int num_cqes);
 void bnxt_qplib_flush_cqn_wq(struct bnxt_qplib_qp *qp);
+void bnxt_re_synchronize_nq(struct bnxt_qplib_nq *nq);
 
 static inline void *bnxt_qplib_get_swqe(struct bnxt_qplib_q *que, u32 *swq_idx)
 {
-- 
2.40.1

[PATCH 6.1 123/228] drm/msm: Fix IS_ERR_OR_NULL() vs NULL check in a5xx_submit_in_rb()

[Greg Kroah-Hartman]

From: Gaosheng Cui <cuigaosheng1@huawei.com>

[ Upstream commit 6e8a996563ecbe68e49c49abd4aaeef69f11f2dc ]

The msm_gem_get_vaddr() returns an ERR_PTR() on failure, and a null
is catastrophic here, so we should use IS_ERR_OR_NULL() to check
the return value.

Fixes: 6a8bd08d0465 ("drm/msm: add sudo flag to submit ioctl")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/547712/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/adreno/a5xx_gpu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
index 0829eaf2cd4e8..895a0e9db1f09 100644
--- a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
@@ -89,7 +89,7 @@ static void a5xx_submit_in_rb(struct msm_gpu *gpu, struct msm_gem_submit *submit
 			 * since we've already mapped it once in
 			 * submit_reloc()
 			 */
-			if (WARN_ON(!ptr))
+			if (WARN_ON(IS_ERR_OR_NULL(ptr)))
 				return;
 
 			for (i = 0; i < dwords; i++) {
-- 
2.40.1

[PATCH 6.1 124/228] cxl/acpi: Fix a use-after-free in cxl_parse_cfmws()

[Greg Kroah-Hartman]

From: Breno Leitao <leitao@debian.org>

[ Upstream commit 4cf67d3cc9994a59cf77bb9c0ccf9007fe916afe ]

KASAN and KFENCE detected an user-after-free in the CXL driver. This
happens in the cxl_decoder_add() fail path. KASAN prints the following
error:

   BUG: KASAN: slab-use-after-free in cxl_parse_cfmws (drivers/cxl/acpi.c:299)

This happens in cxl_parse_cfmws(), where put_device() is called,
releasing cxld, which is accessed later.

Use the local variables in the dev_err() instead of pointing to the
released memory. Since the dev_err() is printing a resource, change the open
coded print format to use the %pr format specifier.

Fixes: e50fe01e1f2a ("cxl/core: Drop ->platform_res attribute for root decoders")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20230714093146.2253438-1-leitao@debian.org
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cxl/acpi.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/cxl/acpi.c b/drivers/cxl/acpi.c
index fb649683dd3ac..55907a94cb388 100644
--- a/drivers/cxl/acpi.c
+++ b/drivers/cxl/acpi.c
@@ -154,8 +154,7 @@ static int cxl_parse_cfmws(union acpi_subtable_headers *header, void *arg,
 	else
 		rc = cxl_decoder_autoremove(dev, cxld);
 	if (rc) {
-		dev_err(dev, "Failed to add decode range [%#llx - %#llx]\n",
-			cxld->hpa_range.start, cxld->hpa_range.end);
+		dev_err(dev, "Failed to add decode range: %pr", res);
 		return 0;
 	}
 	dev_dbg(dev, "add: %s node: %d range [%#llx - %#llx]\n",
-- 
2.40.1

[PATCH 6.1 125/228] cxl/acpi: Return rc instead of 0 in cxl_parse_cfmws()

[Greg Kroah-Hartman]

From: Breno Leitao <leitao@debian.org>

[ Upstream commit 91019b5bc7c2c5e6f676cce80ee6d12b2753d018 ]

Driver initialization returned success (return 0) even if the
initialization (cxl_decoder_add() or acpi_table_parse_cedt()) failed.

Return the error instead of swallowing it.

Fixes: f4ce1f766f1e ("cxl/acpi: Convert CFMWS parsing to ACPI sub-table helpers")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20230714093146.2253438-2-leitao@debian.org
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cxl/acpi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/cxl/acpi.c b/drivers/cxl/acpi.c
index 55907a94cb388..07b184382707e 100644
--- a/drivers/cxl/acpi.c
+++ b/drivers/cxl/acpi.c
@@ -155,7 +155,7 @@ static int cxl_parse_cfmws(union acpi_subtable_headers *header, void *arg,
 		rc = cxl_decoder_autoremove(dev, cxld);
 	if (rc) {
 		dev_err(dev, "Failed to add decode range: %pr", res);
-		return 0;
+		return rc;
 	}
 	dev_dbg(dev, "add: %s node: %d range [%#llx - %#llx]\n",
 		dev_name(&cxld->dev),
-- 
2.40.1

[PATCH 6.1 126/228] ASoC: fsl_spdif: Silence output on stop

[Greg Kroah-Hartman]

From: Matus Gajdos <matuszpd@gmail.com>

[ Upstream commit 0e4c2b6b0c4a4b4014d9424c27e5e79d185229c5 ]

Clear TX registers on stop to prevent the SPDIF interface from sending
last written word over and over again.

Fixes: a2388a498ad2 ("ASoC: fsl: Add S/PDIF CPU DAI driver")
Signed-off-by: Matus Gajdos <matuszpd@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20230719164729.19969-1-matuszpd@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/fsl/fsl_spdif.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c
index 275aba8e0c469..fb6806b2db859 100644
--- a/sound/soc/fsl/fsl_spdif.c
+++ b/sound/soc/fsl/fsl_spdif.c
@@ -751,6 +751,8 @@ static int fsl_spdif_trigger(struct snd_pcm_substream *substream,
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
 		regmap_update_bits(regmap, REG_SPDIF_SCR, dmaen, 0);
 		regmap_update_bits(regmap, REG_SPDIF_SIE, intr, 0);
+		regmap_write(regmap, REG_SPDIF_STL, 0x0);
+		regmap_write(regmap, REG_SPDIF_STR, 0x0);
 		break;
 	default:
 		return -EINVAL;
-- 
2.40.1

[PATCH 6.1 127/228] block: Fix a source code comment in include/uapi/linux/blkzoned.h

[Greg Kroah-Hartman]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit e0933b526fbfd937c4a8f4e35fcdd49f0e22d411 ]

Fix the symbolic names for zone conditions in the blkzoned.h header
file.

Cc: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <dlemoal@kernel.org>
Fixes: 6a0cb1bc106f ("block: Implement support for zoned block devices")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230706201422.3987341-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/uapi/linux/blkzoned.h | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/include/uapi/linux/blkzoned.h b/include/uapi/linux/blkzoned.h
index b80fcc9ea5257..f85743ef6e7d1 100644
--- a/include/uapi/linux/blkzoned.h
+++ b/include/uapi/linux/blkzoned.h
@@ -51,13 +51,13 @@ enum blk_zone_type {
  *
  * The Zone Condition state machine in the ZBC/ZAC standards maps the above
  * deinitions as:
- *   - ZC1: Empty         | BLK_ZONE_EMPTY
+ *   - ZC1: Empty         | BLK_ZONE_COND_EMPTY
  *   - ZC2: Implicit Open | BLK_ZONE_COND_IMP_OPEN
  *   - ZC3: Explicit Open | BLK_ZONE_COND_EXP_OPEN
- *   - ZC4: Closed        | BLK_ZONE_CLOSED
- *   - ZC5: Full          | BLK_ZONE_FULL
- *   - ZC6: Read Only     | BLK_ZONE_READONLY
- *   - ZC7: Offline       | BLK_ZONE_OFFLINE
+ *   - ZC4: Closed        | BLK_ZONE_COND_CLOSED
+ *   - ZC5: Full          | BLK_ZONE_COND_FULL
+ *   - ZC6: Read Only     | BLK_ZONE_COND_READONLY
+ *   - ZC7: Offline       | BLK_ZONE_COND_OFFLINE
  *
  * Conditions 0x5 to 0xC are reserved by the current ZBC/ZAC spec and should
  * be considered invalid.
-- 
2.40.1

[PATCH 6.1 128/228] smb3: do not set NTLMSSP_VERSION flag for negotiate not auth request

[Greg Kroah-Hartman]

From: Steve French <stfrench@microsoft.com>

[ Upstream commit 19826558210b9102a7d4681c91784d137d60d71b ]

The NTLMSSP_NEGOTIATE_VERSION flag only needs to be sent during
the NTLMSSP NEGOTIATE (not the AUTH) request, so filter it out for
NTLMSSP AUTH requests. See MS-NLMP 2.2.1.3

This fixes a problem found by the gssntlmssp server.

Link: https://github.com/gssapi/gss-ntlmssp/issues/95
Fixes: 52d005337b2c ("smb3: send NTLMSSP version information")
Acked-by: Roy Shterman <roy.shterman@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/client/sess.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/fs/smb/client/sess.c b/fs/smb/client/sess.c
index 81be17845072a..1e3e22979604f 100644
--- a/fs/smb/client/sess.c
+++ b/fs/smb/client/sess.c
@@ -1014,6 +1014,7 @@ int build_ntlmssp_smb3_negotiate_blob(unsigned char **pbuffer,
 }
 
 
+/* See MS-NLMP 2.2.1.3 */
 int build_ntlmssp_auth_blob(unsigned char **pbuffer,
 					u16 *buflen,
 				   struct cifs_ses *ses,
@@ -1048,7 +1049,8 @@ int build_ntlmssp_auth_blob(unsigned char **pbuffer,
 
 	flags = ses->ntlmssp->server_flags | NTLMSSP_REQUEST_TARGET |
 		NTLMSSP_NEGOTIATE_TARGET_INFO | NTLMSSP_NEGOTIATE_WORKSTATION_SUPPLIED;
-
+	/* we only send version information in ntlmssp negotiate, so do not set this flag */
+	flags = flags & ~NTLMSSP_NEGOTIATE_VERSION;
 	tmp = *pbuffer + sizeof(AUTHENTICATE_MESSAGE);
 	sec_blob->NegotiateFlags = cpu_to_le32(flags);
 
-- 
2.40.1

[PATCH 6.1 129/228] drm/i915: Fix an error handling path in igt_write_huge()

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit e354f67733115b4453268f61e6e072e9b1ea7a2f ]

All error handling paths go to 'out', except this one. Be consistent and
also branch to 'out' here.

Fixes: c10a652e239e ("drm/i915/selftests: Rework context handling in hugepages selftests")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7a036b88671312ee9adc01c74ef5b3376f690b76.1689619758.git.christophe.jaillet@wanadoo.fr
(cherry picked from commit 361ecaadb1ce3c5312c7c4c419271326d43899eb)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/i915/gem/selftests/huge_pages.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/gem/selftests/huge_pages.c b/drivers/gpu/drm/i915/gem/selftests/huge_pages.c
index 436598f19522c..02fe7ea8c5df8 100644
--- a/drivers/gpu/drm/i915/gem/selftests/huge_pages.c
+++ b/drivers/gpu/drm/i915/gem/selftests/huge_pages.c
@@ -1185,8 +1185,10 @@ static int igt_write_huge(struct drm_i915_private *i915,
 	 * times in succession a possibility by enlarging the permutation array.
 	 */
 	order = i915_random_order(count * count, &prng);
-	if (!order)
-		return -ENOMEM;
+	if (!order) {
+		err = -ENOMEM;
+		goto out;
+	}
 
 	max_page_size = rounddown_pow_of_two(obj->mm.page_sizes.sg);
 	max = div_u64(max - size, max_page_size);
-- 
2.40.1

[PATCH 6.1 130/228] xenbus: check xen_domain in xenbus_probe_initcall

[Greg Kroah-Hartman]

From: Stefano Stabellini <sstabellini@kernel.org>

[ Upstream commit 0d8f7cc8057890db08c54fe610d8a94af59da082 ]

The same way we already do in xenbus_init.
Fixes the following warning:

[  352.175563] Trying to free already-free IRQ 0
[  352.177355] WARNING: CPU: 1 PID: 88 at kernel/irq/manage.c:1893 free_irq+0xbf/0x350
[...]
[  352.213951] Call Trace:
[  352.214390]  <TASK>
[  352.214717]  ? __warn+0x81/0x170
[  352.215436]  ? free_irq+0xbf/0x350
[  352.215906]  ? report_bug+0x10b/0x200
[  352.216408]  ? prb_read_valid+0x17/0x20
[  352.216926]  ? handle_bug+0x44/0x80
[  352.217409]  ? exc_invalid_op+0x13/0x60
[  352.217932]  ? asm_exc_invalid_op+0x16/0x20
[  352.218497]  ? free_irq+0xbf/0x350
[  352.218979]  ? __pfx_xenbus_probe_thread+0x10/0x10
[  352.219600]  xenbus_probe+0x7a/0x80
[  352.221030]  xenbus_probe_thread+0x76/0xc0

Fixes: 5b3353949e89 ("xen: add support for initializing xenstore later as HVM domain")
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>

Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2307211609140.3118466@ubuntu-linux-20-04-desktop
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/xen/xenbus/xenbus_probe.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/xen/xenbus/xenbus_probe.c b/drivers/xen/xenbus/xenbus_probe.c
index 58b732dcbfb83..639bf628389ba 100644
--- a/drivers/xen/xenbus/xenbus_probe.c
+++ b/drivers/xen/xenbus/xenbus_probe.c
@@ -811,6 +811,9 @@ static int xenbus_probe_thread(void *unused)
 
 static int __init xenbus_probe_initcall(void)
 {
+	if (!xen_domain())
+		return -ENODEV;
+
 	/*
 	 * Probe XenBus here in the XS_PV case, and also XS_HVM unless we
 	 * need to wait for the platform PCI device to come up or
-- 
2.40.1

[PATCH 6.1 131/228] dm raid: fix missing reconfig_mutex unlock in raid_ctr() error paths

[Greg Kroah-Hartman]

From: Yu Kuai <yukuai3@huawei.com>

[ Upstream commit bae3028799dc4f1109acc4df37c8ff06f2d8f1a0 ]

In the error paths 'bad_stripe_cache' and 'bad_check_reshape',
'reconfig_mutex' is still held after raid_ctr() returns.

Fixes: 9dbd1aa3a81c ("dm raid: add reshaping support to the target")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm-raid.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index b26c12856b1db..bd0da5bbd57b0 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -3274,15 +3274,19 @@ static int raid_ctr(struct dm_target *ti, unsigned int argc, char **argv)
 	/* Try to adjust the raid4/5/6 stripe cache size to the stripe size */
 	if (rs_is_raid456(rs)) {
 		r = rs_set_raid456_stripe_cache(rs);
-		if (r)
+		if (r) {
+			mddev_unlock(&rs->md);
 			goto bad_stripe_cache;
+		}
 	}
 
 	/* Now do an early reshape check */
 	if (test_bit(RT_FLAG_RESHAPE_RS, &rs->runtime_flags)) {
 		r = rs_check_reshape(rs);
-		if (r)
+		if (r) {
+			mddev_unlock(&rs->md);
 			goto bad_check_reshape;
+		}
 
 		/* Restore new, ctr requested layout to perform check */
 		rs_config_restore(rs, &rs_layout);
@@ -3291,6 +3295,7 @@ static int raid_ctr(struct dm_target *ti, unsigned int argc, char **argv)
 			r = rs->md.pers->check_reshape(&rs->md);
 			if (r) {
 				ti->error = "Reshape check failed";
+				mddev_unlock(&rs->md);
 				goto bad_check_reshape;
 			}
 		}
-- 
2.40.1

[PATCH 6.1 132/228] dm raid: clean up four equivalent goto tags in raid_ctr()

[Greg Kroah-Hartman]

From: Yu Kuai <yukuai3@huawei.com>

[ Upstream commit e74c874eabe2e9173a8fbdad616cd89c70eb8ffd ]

There are four equivalent goto tags in raid_ctr(), clean them up to
use just one.

There is no functional change and this is preparation to fix
raid_ctr()'s unprotected md_stop().

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Stable-dep-of: 7d5fff8982a2 ("dm raid: protect md_stop() with 'reconfig_mutex'")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm-raid.c | 27 +++++++++------------------
 1 file changed, 9 insertions(+), 18 deletions(-)

diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index bd0da5bbd57b0..c3736d1f72310 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -3254,8 +3254,7 @@ static int raid_ctr(struct dm_target *ti, unsigned int argc, char **argv)
 	r = md_start(&rs->md);
 	if (r) {
 		ti->error = "Failed to start raid array";
-		mddev_unlock(&rs->md);
-		goto bad_md_start;
+		goto bad_unlock;
 	}
 
 	/* If raid4/5/6 journal mode explicitly requested (only possible with journal dev) -> set it */
@@ -3263,8 +3262,7 @@ static int raid_ctr(struct dm_target *ti, unsigned int argc, char **argv)
 		r = r5c_journal_mode_set(&rs->md, rs->journal_dev.mode);
 		if (r) {
 			ti->error = "Failed to set raid4/5/6 journal mode";
-			mddev_unlock(&rs->md);
-			goto bad_journal_mode_set;
+			goto bad_unlock;
 		}
 	}
 
@@ -3274,19 +3272,15 @@ static int raid_ctr(struct dm_target *ti, unsigned int argc, char **argv)
 	/* Try to adjust the raid4/5/6 stripe cache size to the stripe size */
 	if (rs_is_raid456(rs)) {
 		r = rs_set_raid456_stripe_cache(rs);
-		if (r) {
-			mddev_unlock(&rs->md);
-			goto bad_stripe_cache;
-		}
+		if (r)
+			goto bad_unlock;
 	}
 
 	/* Now do an early reshape check */
 	if (test_bit(RT_FLAG_RESHAPE_RS, &rs->runtime_flags)) {
 		r = rs_check_reshape(rs);
-		if (r) {
-			mddev_unlock(&rs->md);
-			goto bad_check_reshape;
-		}
+		if (r)
+			goto bad_unlock;
 
 		/* Restore new, ctr requested layout to perform check */
 		rs_config_restore(rs, &rs_layout);
@@ -3295,8 +3289,7 @@ static int raid_ctr(struct dm_target *ti, unsigned int argc, char **argv)
 			r = rs->md.pers->check_reshape(&rs->md);
 			if (r) {
 				ti->error = "Reshape check failed";
-				mddev_unlock(&rs->md);
-				goto bad_check_reshape;
+				goto bad_unlock;
 			}
 		}
 	}
@@ -3307,10 +3300,8 @@ static int raid_ctr(struct dm_target *ti, unsigned int argc, char **argv)
 	mddev_unlock(&rs->md);
 	return 0;
 
-bad_md_start:
-bad_journal_mode_set:
-bad_stripe_cache:
-bad_check_reshape:
+bad_unlock:
+	mddev_unlock(&rs->md);
 	md_stop(&rs->md);
 bad:
 	raid_set_free(rs);
-- 
2.40.1

[PATCH 6.1 133/228] dm raid: protect md_stop() with reconfig_mutex

[Greg Kroah-Hartman]

From: Yu Kuai <yukuai3@huawei.com>

[ Upstream commit 7d5fff8982a2199d49ec067818af7d84d4f95ca0 ]

__md_stop_writes() and __md_stop() will modify many fields that are
protected by 'reconfig_mutex', and all the callers will grab
'reconfig_mutex' except for md_stop().

Also, update md_stop() to make certain 'reconfig_mutex' is held using
lockdep_assert_held().

Fixes: 9d09e663d550 ("dm: raid456 basic support")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm-raid.c | 4 +++-
 drivers/md/md.c      | 2 ++
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index c3736d1f72310..4b7528dc2fd08 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -3301,8 +3301,8 @@ static int raid_ctr(struct dm_target *ti, unsigned int argc, char **argv)
 	return 0;
 
 bad_unlock:
-	mddev_unlock(&rs->md);
 	md_stop(&rs->md);
+	mddev_unlock(&rs->md);
 bad:
 	raid_set_free(rs);
 
@@ -3313,7 +3313,9 @@ static void raid_dtr(struct dm_target *ti)
 {
 	struct raid_set *rs = ti->private;
 
+	mddev_lock_nointr(&rs->md);
 	md_stop(&rs->md);
+	mddev_unlock(&rs->md);
 	raid_set_free(rs);
 }
 
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 829e1bd9bcbf9..45daba0eb9310 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -6269,6 +6269,8 @@ static void __md_stop(struct mddev *mddev)
 
 void md_stop(struct mddev *mddev)
 {
+	lockdep_assert_held(&mddev->reconfig_mutex);
+
 	/* stop the array and free an attached data structures.
 	 * This is called from dm-raid
 	 */
-- 
2.40.1

[PATCH 6.1 134/228] drm/amd: Fix an error handling mistake in psp_sw_init()

[Greg Kroah-Hartman]

From: Mario Limonciello <mario.limonciello@amd.com>

[ Upstream commit c01aebeef3ce45f696ffa0a1303cea9b34babb45 ]

If the second call to amdgpu_bo_create_kernel() fails, the memory
allocated from the first call should be cleared.  If the third call
fails, the memory from the second call should be cleared.

Fixes: b95b5391684b ("drm/amdgpu/psp: move PSP memory alloc from hw_init to sw_init")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
index 0af9fb4098e8a..eecbd8eeb1f5a 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
@@ -472,11 +472,11 @@ static int psp_sw_init(void *handle)
 	return 0;
 
 failed2:
-	amdgpu_bo_free_kernel(&psp->fw_pri_bo,
-			      &psp->fw_pri_mc_addr, &psp->fw_pri_buf);
-failed1:
 	amdgpu_bo_free_kernel(&psp->fence_buf_bo,
 			      &psp->fence_buf_mc_addr, &psp->fence_buf);
+failed1:
+	amdgpu_bo_free_kernel(&psp->fw_pri_bo,
+			      &psp->fw_pri_mc_addr, &psp->fw_pri_buf);
 	return ret;
 }
 
-- 
2.40.1

[PATCH 6.1 135/228] drm/amd/display: Unlock on error path in dm_handle_mst_sideband_msg_ready_event()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@linaro.org>

[ Upstream commit 38ac4e8385ffb275b1837986ca6c16f26ea028c5 ]

This error path needs to unlock the "aconnector->handle_mst_msg_ready"
mutex before returning.

Fixes: 4f6d9e38c4d2 ("drm/amd/display: Add polling method to handle MST reply packet")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
index 05708684c9f58..d07e1053b36b3 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
@@ -677,7 +677,7 @@ void dm_handle_mst_sideband_msg_ready_event(
 
 			if (retry == 3) {
 				DRM_ERROR("Failed to ack MST event.\n");
-				return;
+				break;
 			}
 
 			drm_dp_mst_hpd_irq_send_new_request(&aconnector->mst_mgr);
-- 
2.40.1

[PATCH 6.1 136/228] RDMA/irdma: Fix op_type reporting in CQEs

[Greg Kroah-Hartman]

From: Sindhu Devale <sindhu.devale@intel.com>

[ Upstream commit 3bfb25fa2b5bb9c29681e6ac861808f4be1331a9 ]

The op_type field CQ poll info structure is incorrectly
filled in with the queue type as opposed to the op_type
received in the CQEs. The wrong opcode could be decoded
and returned to the ULP.

Copy the op_type field received in the CQE in the CQ poll
info structure.

Fixes: 24419777e943 ("RDMA/irdma: Fix RQ completion opcode")
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230725155439.1057-1-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/irdma/uk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/irdma/uk.c b/drivers/infiniband/hw/irdma/uk.c
index ea2c07751245a..280d633d4ec4f 100644
--- a/drivers/infiniband/hw/irdma/uk.c
+++ b/drivers/infiniband/hw/irdma/uk.c
@@ -1161,7 +1161,7 @@ int irdma_uk_cq_poll_cmpl(struct irdma_cq_uk *cq,
 	}
 	wqe_idx = (u32)FIELD_GET(IRDMA_CQ_WQEIDX, qword3);
 	info->qp_handle = (irdma_qp_handle)(unsigned long)qp;
-	info->op_type = (u8)FIELD_GET(IRDMA_CQ_SQ, qword3);
+	info->op_type = (u8)FIELD_GET(IRDMACQ_OP, qword3);
 
 	if (info->q_type == IRDMA_CQE_QTYPE_RQ) {
 		u32 array_idx;
-- 
2.40.1

[PATCH 6.1 137/228] RDMA/irdma: Report correct WC error

[Greg Kroah-Hartman]

From: Sindhu Devale <sindhu.devale@intel.com>

[ Upstream commit ae463563b7a1b7d4a3d0b065b09d37a76b693937 ]

Report the correct WC error if a MW bind is performed
on an already valid/bound window.

Fixes: 44d9e52977a1 ("RDMA/irdma: Implement device initialization definitions")
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230725155439.1057-2-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/irdma/hw.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/infiniband/hw/irdma/hw.c b/drivers/infiniband/hw/irdma/hw.c
index 05a403f3ffd40..c07ce85d243f1 100644
--- a/drivers/infiniband/hw/irdma/hw.c
+++ b/drivers/infiniband/hw/irdma/hw.c
@@ -191,6 +191,7 @@ static void irdma_set_flush_fields(struct irdma_sc_qp *qp,
 	case IRDMA_AE_AMP_MWBIND_INVALID_RIGHTS:
 	case IRDMA_AE_AMP_MWBIND_BIND_DISABLED:
 	case IRDMA_AE_AMP_MWBIND_INVALID_BOUNDS:
+	case IRDMA_AE_AMP_MWBIND_VALID_STAG:
 		qp->flush_code = FLUSH_MW_BIND_ERR;
 		qp->event_type = IRDMA_QP_EVENT_ACCESS_ERR;
 		break;
-- 
2.40.1

[PATCH 6.1 138/228] drm/msm: Switch idr_lock to spinlock

[Greg Kroah-Hartman]

From: Rob Clark <robdclark@chromium.org>

[ Upstream commit e4f020c6a05db73eac49b7c3b3650251be374200 ]

Needed to idr_preload() which returns with preemption disabled.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527846/
Link: https://lore.kernel.org/r/20230320144356.803762-11-robdclark@gmail.com
Stable-dep-of: 1b5d0ddcb34a ("drm/msm: Disallow submit with fence id 0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/msm_drv.c         |  6 ++----
 drivers/gpu/drm/msm/msm_gem_submit.c  | 10 +++++-----
 drivers/gpu/drm/msm/msm_gpu.h         |  2 +-
 drivers/gpu/drm/msm/msm_submitqueue.c |  2 +-
 4 files changed, 9 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
index ac3d1d492a48c..f982a827be7ca 100644
--- a/drivers/gpu/drm/msm/msm_drv.c
+++ b/drivers/gpu/drm/msm/msm_drv.c
@@ -932,13 +932,11 @@ static int wait_fence(struct msm_gpu_submitqueue *queue, uint32_t fence_id,
 	 * retired, so if the fence is not found it means there is nothing
 	 * to wait for
 	 */
-	ret = mutex_lock_interruptible(&queue->idr_lock);
-	if (ret)
-		return ret;
+	spin_lock(&queue->idr_lock);
 	fence = idr_find(&queue->fence_idr, fence_id);
 	if (fence)
 		fence = dma_fence_get_rcu(fence);
-	mutex_unlock(&queue->idr_lock);
+	spin_unlock(&queue->idr_lock);
 
 	if (!fence)
 		return 0;
diff --git a/drivers/gpu/drm/msm/msm_gem_submit.c b/drivers/gpu/drm/msm/msm_gem_submit.c
index d6162561141c5..5668860f01827 100644
--- a/drivers/gpu/drm/msm/msm_gem_submit.c
+++ b/drivers/gpu/drm/msm/msm_gem_submit.c
@@ -72,9 +72,9 @@ void __msm_gem_submit_destroy(struct kref *kref)
 	unsigned i;
 
 	if (submit->fence_id) {
-		mutex_lock(&submit->queue->idr_lock);
+		spin_lock(&submit->queue->idr_lock);
 		idr_remove(&submit->queue->fence_idr, submit->fence_id);
-		mutex_unlock(&submit->queue->idr_lock);
+		spin_unlock(&submit->queue->idr_lock);
 	}
 
 	dma_fence_put(submit->user_fence);
@@ -866,7 +866,7 @@ int msm_ioctl_gem_submit(struct drm_device *dev, void *data,
 
 	submit->nr_cmds = i;
 
-	mutex_lock(&queue->idr_lock);
+	spin_lock(&queue->idr_lock);
 
 	/*
 	 * If using userspace provided seqno fence, validate that the id
@@ -876,7 +876,7 @@ int msm_ioctl_gem_submit(struct drm_device *dev, void *data,
 	 */
 	if ((args->flags & MSM_SUBMIT_FENCE_SN_IN) &&
 			idr_find(&queue->fence_idr, args->fence)) {
-		mutex_unlock(&queue->idr_lock);
+		spin_unlock(&queue->idr_lock);
 		ret = -EINVAL;
 		goto out;
 	}
@@ -910,7 +910,7 @@ int msm_ioctl_gem_submit(struct drm_device *dev, void *data,
 						    INT_MAX, GFP_KERNEL);
 	}
 
-	mutex_unlock(&queue->idr_lock);
+	spin_unlock(&queue->idr_lock);
 
 	if (submit->fence_id < 0) {
 		ret = submit->fence_id;
diff --git a/drivers/gpu/drm/msm/msm_gpu.h b/drivers/gpu/drm/msm/msm_gpu.h
index 732295e256834..b39cd332751dc 100644
--- a/drivers/gpu/drm/msm/msm_gpu.h
+++ b/drivers/gpu/drm/msm/msm_gpu.h
@@ -500,7 +500,7 @@ struct msm_gpu_submitqueue {
 	struct msm_file_private *ctx;
 	struct list_head node;
 	struct idr fence_idr;
-	struct mutex idr_lock;
+	struct spinlock idr_lock;
 	struct mutex lock;
 	struct kref ref;
 	struct drm_sched_entity *entity;
diff --git a/drivers/gpu/drm/msm/msm_submitqueue.c b/drivers/gpu/drm/msm/msm_submitqueue.c
index c6929e205b511..0e803125a325a 100644
--- a/drivers/gpu/drm/msm/msm_submitqueue.c
+++ b/drivers/gpu/drm/msm/msm_submitqueue.c
@@ -200,7 +200,7 @@ int msm_submitqueue_create(struct drm_device *drm, struct msm_file_private *ctx,
 		*id = queue->id;
 
 	idr_init(&queue->fence_idr);
-	mutex_init(&queue->idr_lock);
+	spin_lock_init(&queue->idr_lock);
 	mutex_init(&queue->lock);
 
 	list_add_tail(&queue->node, &ctx->submitqueues);
-- 
2.40.1

[PATCH 6.1 139/228] drm/msm: Disallow submit with fence id 0

[Greg Kroah-Hartman]

From: Rob Clark <robdclark@chromium.org>

[ Upstream commit 1b5d0ddcb34a605835051ae2950d5cfed0373dd8 ]

A fence id of zero is expected to be invalid, and is not removed from
the fence_idr table.  If userspace is requesting to specify the fence
id with the FENCE_SN_IN flag, we need to reject a zero fence id value.

Fixes: 17154addc5c1 ("drm/msm: Add MSM_SUBMIT_FENCE_SN_IN")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/549180/
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/msm_gem_submit.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/msm_gem_submit.c b/drivers/gpu/drm/msm/msm_gem_submit.c
index 5668860f01827..c12a6ac2d3840 100644
--- a/drivers/gpu/drm/msm/msm_gem_submit.c
+++ b/drivers/gpu/drm/msm/msm_gem_submit.c
@@ -875,7 +875,7 @@ int msm_ioctl_gem_submit(struct drm_device *dev, void *data,
 	 * after the job is armed
 	 */
 	if ((args->flags & MSM_SUBMIT_FENCE_SN_IN) &&
-			idr_find(&queue->fence_idr, args->fence)) {
+			(!args->fence || idr_find(&queue->fence_idr, args->fence))) {
 		spin_unlock(&queue->idr_lock);
 		ret = -EINVAL;
 		goto out;
-- 
2.40.1

[PATCH 6.1 140/228] ublk_drv: move ublk_get_device_from_id into ublk_ctrl_uring_cmd

[Greg Kroah-Hartman]

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit bfbcef036396a73fbf4b3fee385cc670159df5ad ]

It is annoying for each control command handler to get/put ublk
device and deal with failure.

Control command handler is simplified a lot by moving
ublk_get_device_from_id into ublk_ctrl_uring_cmd().

Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230106041711.914434-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 53e7d08f6d6e ("ublk: fail to start device if queue setup is interrupted")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/ublk_drv.c | 138 ++++++++++++++-------------------------
 1 file changed, 49 insertions(+), 89 deletions(-)

diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
index c56d1c6d8e58d..3ae22e7eb0b09 100644
--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -1529,21 +1529,16 @@ static struct ublk_device *ublk_get_device_from_id(int idx)
 	return ub;
 }
 
-static int ublk_ctrl_start_dev(struct io_uring_cmd *cmd)
+static int ublk_ctrl_start_dev(struct ublk_device *ub, struct io_uring_cmd *cmd)
 {
 	struct ublksrv_ctrl_cmd *header = (struct ublksrv_ctrl_cmd *)cmd->cmd;
 	int ublksrv_pid = (int)header->data[0];
-	struct ublk_device *ub;
 	struct gendisk *disk;
 	int ret = -EINVAL;
 
 	if (ublksrv_pid <= 0)
 		return -EINVAL;
 
-	ub = ublk_get_device_from_id(header->dev_id);
-	if (!ub)
-		return -EINVAL;
-
 	wait_for_completion_interruptible(&ub->completion);
 
 	schedule_delayed_work(&ub->monitor_work, UBLK_DAEMON_MONITOR_PERIOD);
@@ -1593,21 +1588,20 @@ static int ublk_ctrl_start_dev(struct io_uring_cmd *cmd)
 		put_disk(disk);
 out_unlock:
 	mutex_unlock(&ub->mutex);
-	ublk_put_device(ub);
 	return ret;
 }
 
-static int ublk_ctrl_get_queue_affinity(struct io_uring_cmd *cmd)
+static int ublk_ctrl_get_queue_affinity(struct ublk_device *ub,
+		struct io_uring_cmd *cmd)
 {
 	struct ublksrv_ctrl_cmd *header = (struct ublksrv_ctrl_cmd *)cmd->cmd;
 	void __user *argp = (void __user *)(unsigned long)header->addr;
-	struct ublk_device *ub;
 	cpumask_var_t cpumask;
 	unsigned long queue;
 	unsigned int retlen;
 	unsigned int i;
-	int ret = -EINVAL;
-	
+	int ret;
+
 	if (header->len * BITS_PER_BYTE < nr_cpu_ids)
 		return -EINVAL;
 	if (header->len & (sizeof(unsigned long)-1))
@@ -1615,17 +1609,12 @@ static int ublk_ctrl_get_queue_affinity(struct io_uring_cmd *cmd)
 	if (!header->addr)
 		return -EINVAL;
 
-	ub = ublk_get_device_from_id(header->dev_id);
-	if (!ub)
-		return -EINVAL;
-
 	queue = header->data[0];
 	if (queue >= ub->dev_info.nr_hw_queues)
-		goto out_put_device;
+		return -EINVAL;
 
-	ret = -ENOMEM;
 	if (!zalloc_cpumask_var(&cpumask, GFP_KERNEL))
-		goto out_put_device;
+		return -ENOMEM;
 
 	for_each_possible_cpu(i) {
 		if (ub->tag_set.map[HCTX_TYPE_DEFAULT].mq_map[i] == queue)
@@ -1643,8 +1632,6 @@ static int ublk_ctrl_get_queue_affinity(struct io_uring_cmd *cmd)
 	ret = 0;
 out_free_cpumask:
 	free_cpumask_var(cpumask);
-out_put_device:
-	ublk_put_device(ub);
 	return ret;
 }
 
@@ -1765,30 +1752,27 @@ static inline bool ublk_idr_freed(int id)
 	return ptr == NULL;
 }
 
-static int ublk_ctrl_del_dev(int idx)
+static int ublk_ctrl_del_dev(struct ublk_device **p_ub)
 {
-	struct ublk_device *ub;
+	struct ublk_device *ub = *p_ub;
+	int idx = ub->ub_number;
 	int ret;
 
 	ret = mutex_lock_killable(&ublk_ctl_mutex);
 	if (ret)
 		return ret;
 
-	ub = ublk_get_device_from_id(idx);
-	if (ub) {
-		ublk_remove(ub);
-		ublk_put_device(ub);
-		ret = 0;
-	} else {
-		ret = -ENODEV;
-	}
+	ublk_remove(ub);
+
+	/* Mark the reference as consumed */
+	*p_ub = NULL;
+	ublk_put_device(ub);
 
 	/*
 	 * Wait until the idr is removed, then it can be reused after
 	 * DEL_DEV command is returned.
 	 */
-	if (!ret)
-		wait_event(ublk_idr_wq, ublk_idr_freed(idx));
+	wait_event(ublk_idr_wq, ublk_idr_freed(idx));
 	mutex_unlock(&ublk_ctl_mutex);
 
 	return ret;
@@ -1803,50 +1787,36 @@ static inline void ublk_ctrl_cmd_dump(struct io_uring_cmd *cmd)
 			header->data[0], header->addr, header->len);
 }
 
-static int ublk_ctrl_stop_dev(struct io_uring_cmd *cmd)
+static int ublk_ctrl_stop_dev(struct ublk_device *ub)
 {
-	struct ublksrv_ctrl_cmd *header = (struct ublksrv_ctrl_cmd *)cmd->cmd;
-	struct ublk_device *ub;
-
-	ub = ublk_get_device_from_id(header->dev_id);
-	if (!ub)
-		return -EINVAL;
-
 	ublk_stop_dev(ub);
 	cancel_work_sync(&ub->stop_work);
 	cancel_work_sync(&ub->quiesce_work);
 
-	ublk_put_device(ub);
 	return 0;
 }
 
-static int ublk_ctrl_get_dev_info(struct io_uring_cmd *cmd)
+static int ublk_ctrl_get_dev_info(struct ublk_device *ub,
+		struct io_uring_cmd *cmd)
 {
 	struct ublksrv_ctrl_cmd *header = (struct ublksrv_ctrl_cmd *)cmd->cmd;
 	void __user *argp = (void __user *)(unsigned long)header->addr;
-	struct ublk_device *ub;
-	int ret = 0;
 
 	if (header->len < sizeof(struct ublksrv_ctrl_dev_info) || !header->addr)
 		return -EINVAL;
 
-	ub = ublk_get_device_from_id(header->dev_id);
-	if (!ub)
-		return -EINVAL;
-
 	if (copy_to_user(argp, &ub->dev_info, sizeof(ub->dev_info)))
-		ret = -EFAULT;
-	ublk_put_device(ub);
+		return -EFAULT;
 
-	return ret;
+	return 0;
 }
 
-static int ublk_ctrl_get_params(struct io_uring_cmd *cmd)
+static int ublk_ctrl_get_params(struct ublk_device *ub,
+		struct io_uring_cmd *cmd)
 {
 	struct ublksrv_ctrl_cmd *header = (struct ublksrv_ctrl_cmd *)cmd->cmd;
 	void __user *argp = (void __user *)(unsigned long)header->addr;
 	struct ublk_params_header ph;
-	struct ublk_device *ub;
 	int ret;
 
 	if (header->len <= sizeof(ph) || !header->addr)
@@ -1861,10 +1831,6 @@ static int ublk_ctrl_get_params(struct io_uring_cmd *cmd)
 	if (ph.len > sizeof(struct ublk_params))
 		ph.len = sizeof(struct ublk_params);
 
-	ub = ublk_get_device_from_id(header->dev_id);
-	if (!ub)
-		return -EINVAL;
-
 	mutex_lock(&ub->mutex);
 	if (copy_to_user(argp, &ub->params, ph.len))
 		ret = -EFAULT;
@@ -1872,16 +1838,15 @@ static int ublk_ctrl_get_params(struct io_uring_cmd *cmd)
 		ret = 0;
 	mutex_unlock(&ub->mutex);
 
-	ublk_put_device(ub);
 	return ret;
 }
 
-static int ublk_ctrl_set_params(struct io_uring_cmd *cmd)
+static int ublk_ctrl_set_params(struct ublk_device *ub,
+		struct io_uring_cmd *cmd)
 {
 	struct ublksrv_ctrl_cmd *header = (struct ublksrv_ctrl_cmd *)cmd->cmd;
 	void __user *argp = (void __user *)(unsigned long)header->addr;
 	struct ublk_params_header ph;
-	struct ublk_device *ub;
 	int ret = -EFAULT;
 
 	if (header->len <= sizeof(ph) || !header->addr)
@@ -1896,10 +1861,6 @@ static int ublk_ctrl_set_params(struct io_uring_cmd *cmd)
 	if (ph.len > sizeof(struct ublk_params))
 		ph.len = sizeof(struct ublk_params);
 
-	ub = ublk_get_device_from_id(header->dev_id);
-	if (!ub)
-		return -EINVAL;
-
 	/* parameters can only be changed when device isn't live */
 	mutex_lock(&ub->mutex);
 	if (ub->dev_info.state == UBLK_S_DEV_LIVE) {
@@ -1914,7 +1875,6 @@ static int ublk_ctrl_set_params(struct io_uring_cmd *cmd)
 			ub->params.types = 0;
 	}
 	mutex_unlock(&ub->mutex);
-	ublk_put_device(ub);
 
 	return ret;
 }
@@ -1941,17 +1901,13 @@ static void ublk_queue_reinit(struct ublk_device *ub, struct ublk_queue *ubq)
 	}
 }
 
-static int ublk_ctrl_start_recovery(struct io_uring_cmd *cmd)
+static int ublk_ctrl_start_recovery(struct ublk_device *ub,
+		struct io_uring_cmd *cmd)
 {
 	struct ublksrv_ctrl_cmd *header = (struct ublksrv_ctrl_cmd *)cmd->cmd;
-	struct ublk_device *ub;
 	int ret = -EINVAL;
 	int i;
 
-	ub = ublk_get_device_from_id(header->dev_id);
-	if (!ub)
-		return ret;
-
 	mutex_lock(&ub->mutex);
 	if (!ublk_can_use_recovery(ub))
 		goto out_unlock;
@@ -1984,21 +1940,16 @@ static int ublk_ctrl_start_recovery(struct io_uring_cmd *cmd)
 	ret = 0;
  out_unlock:
 	mutex_unlock(&ub->mutex);
-	ublk_put_device(ub);
 	return ret;
 }
 
-static int ublk_ctrl_end_recovery(struct io_uring_cmd *cmd)
+static int ublk_ctrl_end_recovery(struct ublk_device *ub,
+		struct io_uring_cmd *cmd)
 {
 	struct ublksrv_ctrl_cmd *header = (struct ublksrv_ctrl_cmd *)cmd->cmd;
 	int ublksrv_pid = (int)header->data[0];
-	struct ublk_device *ub;
 	int ret = -EINVAL;
 
-	ub = ublk_get_device_from_id(header->dev_id);
-	if (!ub)
-		return ret;
-
 	pr_devel("%s: Waiting for new ubq_daemons(nr: %d) are ready, dev id %d...\n",
 			__func__, ub->dev_info.nr_hw_queues, header->dev_id);
 	/* wait until new ubq_daemon sending all FETCH_REQ */
@@ -2026,7 +1977,6 @@ static int ublk_ctrl_end_recovery(struct io_uring_cmd *cmd)
 	ret = 0;
  out_unlock:
 	mutex_unlock(&ub->mutex);
-	ublk_put_device(ub);
 	return ret;
 }
 
@@ -2034,6 +1984,7 @@ static int ublk_ctrl_uring_cmd(struct io_uring_cmd *cmd,
 		unsigned int issue_flags)
 {
 	struct ublksrv_ctrl_cmd *header = (struct ublksrv_ctrl_cmd *)cmd->cmd;
+	struct ublk_device *ub = NULL;
 	int ret = -EINVAL;
 
 	if (issue_flags & IO_URING_F_NONBLOCK)
@@ -2048,41 +1999,50 @@ static int ublk_ctrl_uring_cmd(struct io_uring_cmd *cmd,
 	if (!capable(CAP_SYS_ADMIN))
 		goto out;
 
-	ret = -ENODEV;
+	if (cmd->cmd_op != UBLK_CMD_ADD_DEV) {
+		ret = -ENODEV;
+		ub = ublk_get_device_from_id(header->dev_id);
+		if (!ub)
+			goto out;
+	}
+
 	switch (cmd->cmd_op) {
 	case UBLK_CMD_START_DEV:
-		ret = ublk_ctrl_start_dev(cmd);
+		ret = ublk_ctrl_start_dev(ub, cmd);
 		break;
 	case UBLK_CMD_STOP_DEV:
-		ret = ublk_ctrl_stop_dev(cmd);
+		ret = ublk_ctrl_stop_dev(ub);
 		break;
 	case UBLK_CMD_GET_DEV_INFO:
-		ret = ublk_ctrl_get_dev_info(cmd);
+		ret = ublk_ctrl_get_dev_info(ub, cmd);
 		break;
 	case UBLK_CMD_ADD_DEV:
 		ret = ublk_ctrl_add_dev(cmd);
 		break;
 	case UBLK_CMD_DEL_DEV:
-		ret = ublk_ctrl_del_dev(header->dev_id);
+		ret = ublk_ctrl_del_dev(&ub);
 		break;
 	case UBLK_CMD_GET_QUEUE_AFFINITY:
-		ret = ublk_ctrl_get_queue_affinity(cmd);
+		ret = ublk_ctrl_get_queue_affinity(ub, cmd);
 		break;
 	case UBLK_CMD_GET_PARAMS:
-		ret = ublk_ctrl_get_params(cmd);
+		ret = ublk_ctrl_get_params(ub, cmd);
 		break;
 	case UBLK_CMD_SET_PARAMS:
-		ret = ublk_ctrl_set_params(cmd);
+		ret = ublk_ctrl_set_params(ub, cmd);
 		break;
 	case UBLK_CMD_START_USER_RECOVERY:
-		ret = ublk_ctrl_start_recovery(cmd);
+		ret = ublk_ctrl_start_recovery(ub, cmd);
 		break;
 	case UBLK_CMD_END_USER_RECOVERY:
-		ret = ublk_ctrl_end_recovery(cmd);
+		ret = ublk_ctrl_end_recovery(ub, cmd);
 		break;
 	default:
+		ret = -ENOTSUPP;
 		break;
 	}
+	if (ub)
+		ublk_put_device(ub);
  out:
 	io_uring_cmd_done(cmd, ret, 0, issue_flags);
 	pr_devel("%s: cmd done ret %d cmd_op %x, dev id %d qid %d\n",
-- 
2.40.1

[PATCH 6.1 141/228] ublk: fail to start device if queue setup is interrupted

[Greg Kroah-Hartman]

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit 53e7d08f6d6e214c40db1f51291bb2975c789dc2 ]

In ublk_ctrl_start_dev(), if wait_for_completion_interruptible() is
interrupted by signal, queues aren't setup successfully yet, so we
have to fail UBLK_CMD_START_DEV, otherwise kernel oops can be triggered.

Reported by German when working on qemu-storage-deamon which requires
single thread ublk daemon.

Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver")
Reported-by: German Maglione <gmaglione@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230726144502.566785-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/ublk_drv.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
index 3ae22e7eb0b09..495e1bf9003b6 100644
--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -1539,7 +1539,8 @@ static int ublk_ctrl_start_dev(struct ublk_device *ub, struct io_uring_cmd *cmd)
 	if (ublksrv_pid <= 0)
 		return -EINVAL;
 
-	wait_for_completion_interruptible(&ub->completion);
+	if (wait_for_completion_interruptible(&ub->completion) != 0)
+		return -EINTR;
 
 	schedule_delayed_work(&ub->monitor_work, UBLK_DAEMON_MONITOR_PERIOD);
 
-- 
2.40.1

[PATCH 6.1 142/228] ublk: fail to recover device if queue setup is interrupted

[Greg Kroah-Hartman]

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit 0c0cbd4ebc375ceebc75c89df04b74f215fab23a ]

In ublk_ctrl_end_recovery(), if wait_for_completion_interruptible() is
interrupted by signal, queues aren't setup successfully yet, so we
have to fail UBLK_CMD_END_USER_RECOVERY, otherwise kernel oops can be
triggered.

Fixes: c732a852b419 ("ublk_drv: add START_USER_RECOVERY and END_USER_RECOVERY support")
Reported-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20230726144502.566785-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/ublk_drv.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
index 495e1bf9003b6..4459cfbdbcb18 100644
--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -1954,7 +1954,9 @@ static int ublk_ctrl_end_recovery(struct ublk_device *ub,
 	pr_devel("%s: Waiting for new ubq_daemons(nr: %d) are ready, dev id %d...\n",
 			__func__, ub->dev_info.nr_hw_queues, header->dev_id);
 	/* wait until new ubq_daemon sending all FETCH_REQ */
-	wait_for_completion_interruptible(&ub->completion);
+	if (wait_for_completion_interruptible(&ub->completion))
+		return -EINTR;
+
 	pr_devel("%s: All new ubq_daemons(nr: %d) are ready, dev id %d\n",
 			__func__, ub->dev_info.nr_hw_queues, header->dev_id);
 
-- 
2.40.1

[PATCH 6.1 143/228] ata: pata_ns87415: mark ns87560_tf_read static

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 3fc2febb0f8ffae354820c1772ec008733237cfa ]

The global function triggers a warning because of the missing prototype

drivers/ata/pata_ns87415.c:263:6: warning: no previous prototype for 'ns87560_tf_read' [-Wmissing-prototypes]
  263 | void ns87560_tf_read(struct ata_port *ap, struct ata_taskfile *tf)

There are no other references to this, so just make it static.

Fixes: c4b5b7b6c4423 ("pata_ns87415: Initial cut at 87415/87560 IDE support")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/pata_ns87415.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index 9dd6bffefb485..602472d4e693e 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -260,7 +260,7 @@ static u8 ns87560_check_status(struct ata_port *ap)
  *	LOCKING:
  *	Inherited from caller.
  */
-void ns87560_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
+static void ns87560_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
 {
 	struct ata_ioports *ioaddr = &ap->ioaddr;
 
-- 
2.40.1

[PATCH 6.1 144/228] ring-buffer: Fix wrong stat of cpu_buffer->read

[Greg Kroah-Hartman]

From: Zheng Yejian <zhengyejian1@huawei.com>

[ Upstream commit 2d093282b0d4357373497f65db6a05eb0c28b7c8 ]

When pages are removed in rb_remove_pages(), 'cpu_buffer->read' is set
to 0 in order to make sure any read iterators reset themselves. However,
this will mess 'entries' stating, see following steps:

  # cd /sys/kernel/tracing/
  # 1. Enlarge ring buffer prepare for later reducing:
  # echo 20 > per_cpu/cpu0/buffer_size_kb
  # 2. Write a log into ring buffer of cpu0:
  # taskset -c 0 echo "hello1" > trace_marker
  # 3. Read the log:
  # cat per_cpu/cpu0/trace_pipe
       <...>-332     [000] .....    62.406844: tracing_mark_write: hello1
  # 4. Stop reading and see the stats, now 0 entries, and 1 event readed:
  # cat per_cpu/cpu0/stats
   entries: 0
   [...]
   read events: 1
  # 5. Reduce the ring buffer
  # echo 7 > per_cpu/cpu0/buffer_size_kb
  # 6. Now entries became unexpected 1 because actually no entries!!!
  # cat per_cpu/cpu0/stats
   entries: 1
   [...]
   read events: 0

To fix it, introduce 'page_removed' field to count total removed pages
since last reset, then use it to let read iterators reset themselves
instead of changing the 'read' pointer.

Link: https://lore.kernel.org/linux-trace-kernel/20230724054040.3489499-1-zhengyejian1@huawei.com

Cc: <mhiramat@kernel.org>
Cc: <vnagarnaik@google.com>
Fixes: 83f40318dab0 ("ring-buffer: Make removal of ring buffer pages atomic")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/ring_buffer.c | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index c264421c4ecd8..c49ed619a64dd 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -529,6 +529,8 @@ struct ring_buffer_per_cpu {
 	rb_time_t			before_stamp;
 	u64				event_stamp[MAX_NEST];
 	u64				read_stamp;
+	/* pages removed since last reset */
+	unsigned long			pages_removed;
 	/* ring buffer pages to update, > 0 to add, < 0 to remove */
 	long				nr_pages_to_update;
 	struct list_head		new_pages; /* new pages to add */
@@ -564,6 +566,7 @@ struct ring_buffer_iter {
 	struct buffer_page		*head_page;
 	struct buffer_page		*cache_reader_page;
 	unsigned long			cache_read;
+	unsigned long			cache_pages_removed;
 	u64				read_stamp;
 	u64				page_stamp;
 	struct ring_buffer_event	*event;
@@ -1967,6 +1970,8 @@ rb_remove_pages(struct ring_buffer_per_cpu *cpu_buffer, unsigned long nr_pages)
 		to_remove = rb_list_head(to_remove)->next;
 		head_bit |= (unsigned long)to_remove & RB_PAGE_HEAD;
 	}
+	/* Read iterators need to reset themselves when some pages removed */
+	cpu_buffer->pages_removed += nr_removed;
 
 	next_page = rb_list_head(to_remove)->next;
 
@@ -1988,12 +1993,6 @@ rb_remove_pages(struct ring_buffer_per_cpu *cpu_buffer, unsigned long nr_pages)
 		cpu_buffer->head_page = list_entry(next_page,
 						struct buffer_page, list);
 
-	/*
-	 * change read pointer to make sure any read iterators reset
-	 * themselves
-	 */
-	cpu_buffer->read = 0;
-
 	/* pages are removed, resume tracing and then free the pages */
 	atomic_dec(&cpu_buffer->record_disabled);
 	raw_spin_unlock_irq(&cpu_buffer->reader_lock);
@@ -4385,6 +4384,7 @@ static void rb_iter_reset(struct ring_buffer_iter *iter)
 
 	iter->cache_reader_page = iter->head_page;
 	iter->cache_read = cpu_buffer->read;
+	iter->cache_pages_removed = cpu_buffer->pages_removed;
 
 	if (iter->head) {
 		iter->read_stamp = cpu_buffer->read_stamp;
@@ -4841,12 +4841,13 @@ rb_iter_peek(struct ring_buffer_iter *iter, u64 *ts)
 	buffer = cpu_buffer->buffer;
 
 	/*
-	 * Check if someone performed a consuming read to
-	 * the buffer. A consuming read invalidates the iterator
-	 * and we need to reset the iterator in this case.
+	 * Check if someone performed a consuming read to the buffer
+	 * or removed some pages from the buffer. In these cases,
+	 * iterator was invalidated and we need to reset it.
 	 */
 	if (unlikely(iter->cache_read != cpu_buffer->read ||
-		     iter->cache_reader_page != cpu_buffer->reader_page))
+		     iter->cache_reader_page != cpu_buffer->reader_page ||
+		     iter->cache_pages_removed != cpu_buffer->pages_removed))
 		rb_iter_reset(iter);
 
  again:
@@ -5291,6 +5292,7 @@ rb_reset_cpu(struct ring_buffer_per_cpu *cpu_buffer)
 	cpu_buffer->last_overrun = 0;
 
 	rb_head_page_activate(cpu_buffer);
+	cpu_buffer->pages_removed = 0;
 }
 
 /* Must have disabled the cpu buffer then done a synchronize_rcu */
-- 
2.40.1

[PATCH 6.1 145/228] tracing: Fix warning in trace_buffered_event_disable()

[Greg Kroah-Hartman]

From: Zheng Yejian <zhengyejian1@huawei.com>

[ Upstream commit dea499781a1150d285c62b26659f62fb00824fce ]

Warning happened in trace_buffered_event_disable() at
  WARN_ON_ONCE(!trace_buffered_event_ref)

  Call Trace:
   ? __warn+0xa5/0x1b0
   ? trace_buffered_event_disable+0x189/0x1b0
   __ftrace_event_enable_disable+0x19e/0x3e0
   free_probe_data+0x3b/0xa0
   unregister_ftrace_function_probe_func+0x6b8/0x800
   event_enable_func+0x2f0/0x3d0
   ftrace_process_regex.isra.0+0x12d/0x1b0
   ftrace_filter_write+0xe6/0x140
   vfs_write+0x1c9/0x6f0
   [...]

The cause of the warning is in __ftrace_event_enable_disable(),
trace_buffered_event_enable() was called once while
trace_buffered_event_disable() was called twice.
Reproduction script show as below, for analysis, see the comments:
 ```
 #!/bin/bash

 cd /sys/kernel/tracing/

 # 1. Register a 'disable_event' command, then:
 #    1) SOFT_DISABLED_BIT was set;
 #    2) trace_buffered_event_enable() was called first time;
 echo 'cmdline_proc_show:disable_event:initcall:initcall_finish' > \
     set_ftrace_filter

 # 2. Enable the event registered, then:
 #    1) SOFT_DISABLED_BIT was cleared;
 #    2) trace_buffered_event_disable() was called first time;
 echo 1 > events/initcall/initcall_finish/enable

 # 3. Try to call into cmdline_proc_show(), then SOFT_DISABLED_BIT was
 #    set again!!!
 cat /proc/cmdline

 # 4. Unregister the 'disable_event' command, then:
 #    1) SOFT_DISABLED_BIT was cleared again;
 #    2) trace_buffered_event_disable() was called second time!!!
 echo '!cmdline_proc_show:disable_event:initcall:initcall_finish' > \
     set_ftrace_filter
 ```

To fix it, IIUC, we can change to call trace_buffered_event_enable() at
fist time soft-mode enabled, and call trace_buffered_event_disable() at
last time soft-mode disabled.

Link: https://lore.kernel.org/linux-trace-kernel/20230726095804.920457-1-zhengyejian1@huawei.com

Cc: <mhiramat@kernel.org>
Fixes: 0fc1b09ff1ff ("tracing: Use temp buffer when filtering events")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/trace_events.c | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index e679239864965..0447c46ef4d71 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -609,7 +609,6 @@ static int __ftrace_event_enable_disable(struct trace_event_file *file,
 {
 	struct trace_event_call *call = file->event_call;
 	struct trace_array *tr = file->tr;
-	unsigned long file_flags = file->flags;
 	int ret = 0;
 	int disable;
 
@@ -633,6 +632,8 @@ static int __ftrace_event_enable_disable(struct trace_event_file *file,
 				break;
 			disable = file->flags & EVENT_FILE_FL_SOFT_DISABLED;
 			clear_bit(EVENT_FILE_FL_SOFT_MODE_BIT, &file->flags);
+			/* Disable use of trace_buffered_event */
+			trace_buffered_event_disable();
 		} else
 			disable = !(file->flags & EVENT_FILE_FL_SOFT_MODE);
 
@@ -671,6 +672,8 @@ static int __ftrace_event_enable_disable(struct trace_event_file *file,
 			if (atomic_inc_return(&file->sm_ref) > 1)
 				break;
 			set_bit(EVENT_FILE_FL_SOFT_MODE_BIT, &file->flags);
+			/* Enable use of trace_buffered_event */
+			trace_buffered_event_enable();
 		}
 
 		if (!(file->flags & EVENT_FILE_FL_ENABLED)) {
@@ -710,15 +713,6 @@ static int __ftrace_event_enable_disable(struct trace_event_file *file,
 		break;
 	}
 
-	/* Enable or disable use of trace_buffered_event */
-	if ((file_flags & EVENT_FILE_FL_SOFT_DISABLED) !=
-	    (file->flags & EVENT_FILE_FL_SOFT_DISABLED)) {
-		if (file->flags & EVENT_FILE_FL_SOFT_DISABLED)
-			trace_buffered_event_enable();
-		else
-			trace_buffered_event_disable();
-	}
-
 	return ret;
 }
 
-- 
2.40.1

[PATCH 6.1 146/228] Revert "usb: gadget: tegra-xudc: Fix error check in tegra_xudc_powerdomain_init()"

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@linaro.org>

commit a8291be6b5dd465c22af229483dbac543a91e24e upstream.

This reverts commit f08aa7c80dac27ee00fa6827f447597d2fba5465.

The reverted commit was based on static analysis and a misunderstanding
of how PTR_ERR() and NULLs are supposed to work.  When a function
returns both pointer errors and NULL then normally the NULL means
"continue operating without a feature because it was deliberately
turned off".  The NULL should not be treated as a failure.  If a driver
cannot work when that feature is disabled then the KConfig should
enforce that the function cannot return NULL.  We should not need to
test for it.

In this driver, the bug means that probe cannot succeed when CONFIG_PM
is disabled.

Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: f08aa7c80dac ("usb: gadget: tegra-xudc: Fix error check in tegra_xudc_powerdomain_init()")
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/ZKQoBa84U/ykEh3C@moroto
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/udc/tegra-xudc.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/usb/gadget/udc/tegra-xudc.c
+++ b/drivers/usb/gadget/udc/tegra-xudc.c
@@ -3695,15 +3695,15 @@ static int tegra_xudc_powerdomain_init(s
 	int err;
 
 	xudc->genpd_dev_device = dev_pm_domain_attach_by_name(dev, "dev");
-	if (IS_ERR_OR_NULL(xudc->genpd_dev_device)) {
-		err = PTR_ERR(xudc->genpd_dev_device) ? : -ENODATA;
+	if (IS_ERR(xudc->genpd_dev_device)) {
+		err = PTR_ERR(xudc->genpd_dev_device);
 		dev_err(dev, "failed to get device power domain: %d\n", err);
 		return err;
 	}
 
 	xudc->genpd_dev_ss = dev_pm_domain_attach_by_name(dev, "ss");
-	if (IS_ERR_OR_NULL(xudc->genpd_dev_ss)) {
-		err = PTR_ERR(xudc->genpd_dev_ss) ? : -ENODATA;
+	if (IS_ERR(xudc->genpd_dev_ss)) {
+		err = PTR_ERR(xudc->genpd_dev_ss);
 		dev_err(dev, "failed to get SuperSpeed power domain: %d\n", err);
 		return err;
 	}

[PATCH 6.1 147/228] usb: gadget: call usb_gadget_check_config() to verify UDC capability

[Greg Kroah-Hartman]

From: Frank Li <Frank.Li@nxp.com>

commit f4fc01af5b640bc39bd9403b5fd855345a2ad5f8 upstream.

The legacy gadget driver omitted calling usb_gadget_check_config()
to ensure that the USB device controller (UDC) has adequate resources,
including sufficient endpoint numbers and types, to support the given
configuration.

Previously, usb_add_config() was solely invoked by the legacy gadget
driver. Adds the necessary usb_gadget_check_config() after the bind()
operation to fix the issue.

Fixes: dce49449e04f ("usb: cdns3: allocate TX FIFO size according to composite EP number")
Cc: stable <stable@kernel.org>
Reported-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20230707230015.494999-1-Frank.Li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/composite.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1029,6 +1029,10 @@ int usb_add_config(struct usb_composite_
 		goto done;
 
 	status = bind(config);
+
+	if (status == 0)
+		status = usb_gadget_check_config(cdev->gadget);
+
 	if (status < 0) {
 		while (!list_empty(&config->functions)) {
 			struct usb_function		*f;

[PATCH 6.1 148/228] USB: gadget: Fix the memory leak in raw_gadget driver

[Greg Kroah-Hartman]

From: Zqiang <qiang.zhang1211@gmail.com>

commit 83e30f2bf86ef7c38fbd476ed81a88522b620628 upstream.

Currently, increasing raw_dev->count happens before invoke the
raw_queue_event(), if the raw_queue_event() return error, invoke
raw_release() will not trigger the dev_free() to be called.

[  268.905865][ T5067] raw-gadget.0 gadget.0: failed to queue event
[  268.912053][ T5067] udc dummy_udc.0: failed to start USB Raw Gadget: -12
[  268.918885][ T5067] raw-gadget.0: probe of gadget.0 failed with error -12
[  268.925956][ T5067] UDC core: USB Raw Gadget: couldn't find an available UDC or it's busy
[  268.934657][ T5067] misc raw-gadget: fail, usb_gadget_register_driver returned -16

BUG: memory leak

[<ffffffff8154bf94>] kmalloc_trace+0x24/0x90 mm/slab_common.c:1076
[<ffffffff8347eb55>] kmalloc include/linux/slab.h:582 [inline]
[<ffffffff8347eb55>] kzalloc include/linux/slab.h:703 [inline]
[<ffffffff8347eb55>] dev_new drivers/usb/gadget/legacy/raw_gadget.c:191 [inline]
[<ffffffff8347eb55>] raw_open+0x45/0x110 drivers/usb/gadget/legacy/raw_gadget.c:385
[<ffffffff827d1d09>] misc_open+0x1a9/0x1f0 drivers/char/misc.c:165

[<ffffffff8154bf94>] kmalloc_trace+0x24/0x90 mm/slab_common.c:1076
[<ffffffff8347cd2f>] kmalloc include/linux/slab.h:582 [inline]
[<ffffffff8347cd2f>] raw_ioctl_init+0xdf/0x410 drivers/usb/gadget/legacy/raw_gadget.c:460
[<ffffffff8347dfe9>] raw_ioctl+0x5f9/0x1120 drivers/usb/gadget/legacy/raw_gadget.c:1250
[<ffffffff81685173>] vfs_ioctl fs/ioctl.c:51 [inline]

[<ffffffff8154bf94>] kmalloc_trace+0x24/0x90 mm/slab_common.c:1076
[<ffffffff833ecc6a>] kmalloc include/linux/slab.h:582 [inline]
[<ffffffff833ecc6a>] kzalloc include/linux/slab.h:703 [inline]
[<ffffffff833ecc6a>] dummy_alloc_request+0x5a/0xe0 drivers/usb/gadget/udc/dummy_hcd.c:665
[<ffffffff833e9132>] usb_ep_alloc_request+0x22/0xd0 drivers/usb/gadget/udc/core.c:196
[<ffffffff8347f13d>] gadget_bind+0x6d/0x370 drivers/usb/gadget/legacy/raw_gadget.c:292

This commit therefore invoke kref_get() under the condition that
raw_queue_event() return success.

Reported-by: syzbot+feb045d335c1fdde5bf7@syzkaller.appspotmail.com
Cc: stable <stable@kernel.org>
Closes: https://syzkaller.appspot.com/bug?extid=feb045d335c1fdde5bf7
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20230714074011.20989-1-qiang.zhang1211@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/legacy/raw_gadget.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/drivers/usb/gadget/legacy/raw_gadget.c
+++ b/drivers/usb/gadget/legacy/raw_gadget.c
@@ -310,13 +310,15 @@ static int gadget_bind(struct usb_gadget
 	dev->eps_num = i;
 	spin_unlock_irqrestore(&dev->lock, flags);
 
-	/* Matches kref_put() in gadget_unbind(). */
-	kref_get(&dev->count);
-
 	ret = raw_queue_event(dev, USB_RAW_EVENT_CONNECT, 0, NULL);
-	if (ret < 0)
+	if (ret < 0) {
 		dev_err(&gadget->dev, "failed to queue event\n");
+		set_gadget_data(gadget, NULL);
+		return ret;
+	}
 
+	/* Matches kref_put() in gadget_unbind(). */
+	kref_get(&dev->count);
 	return ret;
 }
 

[PATCH 6.1 149/228] usb: gadget: core: remove unbalanced mutex_unlock in usb_gadget_activate

[Greg Kroah-Hartman]

From: Michael Grzeschik <m.grzeschik@pengutronix.de>

commit 6237390644fb92b81f5262877fe545d0d2c7b5d7 upstream.

Commit 286d9975a838 ("usb: gadget: udc: core: Prevent soft_connect_store() race")
introduced one extra mutex_unlock of connect_lock in the usb_gadget_active function.

Fixes: 286d9975a838 ("usb: gadget: udc: core: Prevent soft_connect_store() race")
Cc: stable <stable@kernel.org>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230721222256.1743645-1-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/udc/core.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -851,7 +851,6 @@ int usb_gadget_activate(struct usb_gadge
 	 */
 	if (gadget->connected)
 		ret = usb_gadget_connect_locked(gadget);
-	mutex_unlock(&gadget->udc->connect_lock);
 
 unlock:
 	mutex_unlock(&gadget->udc->connect_lock);

[PATCH 6.1 150/228] KVM: Grab a reference to KVM for VM and vCPU stats file descriptors

[Greg Kroah-Hartman]

From: Sean Christopherson <seanjc@google.com>

commit eed3013faa401aae662398709410a59bb0646e32 upstream.

Grab a reference to KVM prior to installing VM and vCPU stats file
descriptors to ensure the underlying VM and vCPU objects are not freed
until the last reference to any and all stats fds are dropped.

Note, the stats paths manually invoke fd_install() and so don't need to
grab a reference before creating the file.

Fixes: ce55c049459c ("KVM: stats: Support binary stats retrieval for a VCPU")
Fixes: fcfe1baeddbf ("KVM: stats: Support binary stats retrieval for a VM")
Reported-by: Zheng Zhang <zheng.zhang@email.ucr.edu>
Closes: https://lore.kernel.org/all/CAC_GQSr3xzZaeZt85k_RCBd5kfiOve8qXo7a81Cq53LuVQ5r=Q@mail.gmail.com
Cc: stable@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Message-Id: <20230711230131.648752-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 virt/kvm/kvm_main.c |   24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -4032,8 +4032,17 @@ static ssize_t kvm_vcpu_stats_read(struc
 			sizeof(vcpu->stat), user_buffer, size, offset);
 }
 
+static int kvm_vcpu_stats_release(struct inode *inode, struct file *file)
+{
+	struct kvm_vcpu *vcpu = file->private_data;
+
+	kvm_put_kvm(vcpu->kvm);
+	return 0;
+}
+
 static const struct file_operations kvm_vcpu_stats_fops = {
 	.read = kvm_vcpu_stats_read,
+	.release = kvm_vcpu_stats_release,
 	.llseek = noop_llseek,
 };
 
@@ -4054,6 +4063,9 @@ static int kvm_vcpu_ioctl_get_stats_fd(s
 		put_unused_fd(fd);
 		return PTR_ERR(file);
 	}
+
+	kvm_get_kvm(vcpu->kvm);
+
 	file->f_mode |= FMODE_PREAD;
 	fd_install(fd, file);
 
@@ -4658,8 +4670,17 @@ static ssize_t kvm_vm_stats_read(struct
 				sizeof(kvm->stat), user_buffer, size, offset);
 }
 
+static int kvm_vm_stats_release(struct inode *inode, struct file *file)
+{
+	struct kvm *kvm = file->private_data;
+
+	kvm_put_kvm(kvm);
+	return 0;
+}
+
 static const struct file_operations kvm_vm_stats_fops = {
 	.read = kvm_vm_stats_read,
+	.release = kvm_vm_stats_release,
 	.llseek = noop_llseek,
 };
 
@@ -4678,6 +4699,9 @@ static int kvm_vm_ioctl_get_stats_fd(str
 		put_unused_fd(fd);
 		return PTR_ERR(file);
 	}
+
+	kvm_get_kvm(kvm);
+
 	file->f_mode |= FMODE_PREAD;
 	fd_install(fd, file);
 

[PATCH 6.1 151/228] KVM: VMX: Dont fudge CR0 and CR4 for restricted L2 guest

[Greg Kroah-Hartman]

From: Sean Christopherson <seanjc@google.com>

commit c4abd7352023aa96114915a0bb2b88016a425cda upstream.

Stuff CR0 and/or CR4 to be compliant with a restricted guest if and only
if KVM itself is not configured to utilize unrestricted guests, i.e. don't
stuff CR0/CR4 for a restricted L2 that is running as the guest of an
unrestricted L1.  Any attempt to VM-Enter a restricted guest with invalid
CR0/CR4 values should fail, i.e. in a nested scenario, KVM (as L0) should
never observe a restricted L2 with incompatible CR0/CR4, since nested
VM-Enter from L1 should have failed.

And if KVM does observe an active, restricted L2 with incompatible state,
e.g. due to a KVM bug, fudging CR0/CR4 instead of letting VM-Enter fail
does more harm than good, as KVM will often neglect to undo the side
effects, e.g. won't clear rmode.vm86_active on nested VM-Exit, and thus
the damage can easily spill over to L1.  On the other hand, letting
VM-Enter fail due to bad guest state is more likely to contain the damage
to L2 as KVM relies on hardware to perform most guest state consistency
checks, i.e. KVM needs to be able to reflect a failed nested VM-Enter into
L1 irrespective of (un)restricted guest behavior.

Cc: Jim Mattson <jmattson@google.com>
Cc: stable@vger.kernel.org
Fixes: bddd82d19e2e ("KVM: nVMX: KVM needs to unset "unrestricted guest" VM-execution control in vmcs02 if vmcs12 doesn't set it")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230613203037.1968489-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kvm/vmx/vmx.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -1461,6 +1461,11 @@ void vmx_set_rflags(struct kvm_vcpu *vcp
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	unsigned long old_rflags;
 
+	/*
+	 * Unlike CR0 and CR4, RFLAGS handling requires checking if the vCPU
+	 * is an unrestricted guest in order to mark L2 as needing emulation
+	 * if L1 runs L2 as a restricted guest.
+	 */
 	if (is_unrestricted_guest(vcpu)) {
 		kvm_register_mark_available(vcpu, VCPU_EXREG_RFLAGS);
 		vmx->rflags = rflags;
@@ -3169,7 +3174,7 @@ void vmx_set_cr0(struct kvm_vcpu *vcpu,
 	old_cr0_pg = kvm_read_cr0_bits(vcpu, X86_CR0_PG);
 
 	hw_cr0 = (cr0 & ~KVM_VM_CR0_ALWAYS_OFF);
-	if (is_unrestricted_guest(vcpu))
+	if (enable_unrestricted_guest)
 		hw_cr0 |= KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST;
 	else {
 		hw_cr0 |= KVM_VM_CR0_ALWAYS_ON;
@@ -3197,7 +3202,7 @@ void vmx_set_cr0(struct kvm_vcpu *vcpu,
 	}
 #endif
 
-	if (enable_ept && !is_unrestricted_guest(vcpu)) {
+	if (enable_ept && !enable_unrestricted_guest) {
 		/*
 		 * Ensure KVM has an up-to-date snapshot of the guest's CR3.  If
 		 * the below code _enables_ CR3 exiting, vmx_cache_reg() will
@@ -3328,7 +3333,7 @@ void vmx_set_cr4(struct kvm_vcpu *vcpu,
 	unsigned long hw_cr4;
 
 	hw_cr4 = (cr4_read_shadow() & X86_CR4_MCE) | (cr4 & ~X86_CR4_MCE);
-	if (is_unrestricted_guest(vcpu))
+	if (enable_unrestricted_guest)
 		hw_cr4 |= KVM_VM_CR4_ALWAYS_ON_UNRESTRICTED_GUEST;
 	else if (vmx->rmode.vm86_active)
 		hw_cr4 |= KVM_RMODE_VM_CR4_ALWAYS_ON;
@@ -3348,7 +3353,7 @@ void vmx_set_cr4(struct kvm_vcpu *vcpu,
 	vcpu->arch.cr4 = cr4;
 	kvm_register_mark_available(vcpu, VCPU_EXREG_CR4);
 
-	if (!is_unrestricted_guest(vcpu)) {
+	if (!enable_unrestricted_guest) {
 		if (enable_ept) {
 			if (!is_paging(vcpu)) {
 				hw_cr4 &= ~X86_CR4_PAE;

[PATCH 6.1 152/228] KVM: x86: Disallow KVM_SET_SREGS{2} if incoming CR0 is invalid

[Greg Kroah-Hartman]

From: Sean Christopherson <seanjc@google.com>

commit 26a0652cb453c72f6aab0974bc4939e9b14f886b upstream.

Reject KVM_SET_SREGS{2} with -EINVAL if the incoming CR0 is invalid,
e.g. due to setting bits 63:32, illegal combinations, or to a value that
isn't allowed in VMX (non-)root mode.  The VMX checks in particular are
"fun" as failure to disallow Real Mode for an L2 that is configured with
unrestricted guest disabled, when KVM itself has unrestricted guest
enabled, will result in KVM forcing VM86 mode to virtual Real Mode for
L2, but then fail to unwind the related metadata when synthesizing a
nested VM-Exit back to L1 (which has unrestricted guest enabled).

Opportunistically fix a benign typo in the prototype for is_valid_cr4().

Cc: stable@vger.kernel.org
Reported-by: syzbot+5feef0b9ee9c8e9e5689@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000f316b705fdf6e2b4@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230613203037.1968489-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/include/asm/kvm-x86-ops.h |    1 +
 arch/x86/include/asm/kvm_host.h    |    3 ++-
 arch/x86/kvm/svm/svm.c             |    6 ++++++
 arch/x86/kvm/vmx/vmx.c             |   28 +++++++++++++++++++++-------
 arch/x86/kvm/x86.c                 |   34 ++++++++++++++++++++++------------
 5 files changed, 52 insertions(+), 20 deletions(-)

--- a/arch/x86/include/asm/kvm-x86-ops.h
+++ b/arch/x86/include/asm/kvm-x86-ops.h
@@ -36,6 +36,7 @@ KVM_X86_OP(get_segment)
 KVM_X86_OP(get_cpl)
 KVM_X86_OP(set_segment)
 KVM_X86_OP(get_cs_db_l_bits)
+KVM_X86_OP(is_valid_cr0)
 KVM_X86_OP(set_cr0)
 KVM_X86_OP_OPTIONAL(post_set_cr3)
 KVM_X86_OP(is_valid_cr4)
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -1488,9 +1488,10 @@ struct kvm_x86_ops {
 	void (*set_segment)(struct kvm_vcpu *vcpu,
 			    struct kvm_segment *var, int seg);
 	void (*get_cs_db_l_bits)(struct kvm_vcpu *vcpu, int *db, int *l);
+	bool (*is_valid_cr0)(struct kvm_vcpu *vcpu, unsigned long cr0);
 	void (*set_cr0)(struct kvm_vcpu *vcpu, unsigned long cr0);
 	void (*post_set_cr3)(struct kvm_vcpu *vcpu, unsigned long cr3);
-	bool (*is_valid_cr4)(struct kvm_vcpu *vcpu, unsigned long cr0);
+	bool (*is_valid_cr4)(struct kvm_vcpu *vcpu, unsigned long cr4);
 	void (*set_cr4)(struct kvm_vcpu *vcpu, unsigned long cr4);
 	int (*set_efer)(struct kvm_vcpu *vcpu, u64 efer);
 	void (*get_idt)(struct kvm_vcpu *vcpu, struct desc_ptr *dt);
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -1763,6 +1763,11 @@ static void sev_post_set_cr3(struct kvm_
 	}
 }
 
+static bool svm_is_valid_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
+{
+	return true;
+}
+
 void svm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
@@ -4749,6 +4754,7 @@ static struct kvm_x86_ops svm_x86_ops __
 	.set_segment = svm_set_segment,
 	.get_cpl = svm_get_cpl,
 	.get_cs_db_l_bits = svm_get_cs_db_l_bits,
+	.is_valid_cr0 = svm_is_valid_cr0,
 	.set_cr0 = svm_set_cr0,
 	.post_set_cr3 = sev_post_set_cr3,
 	.is_valid_cr4 = svm_is_valid_cr4,
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -2975,6 +2975,15 @@ static void enter_rmode(struct kvm_vcpu
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	struct kvm_vmx *kvm_vmx = to_kvm_vmx(vcpu->kvm);
 
+	/*
+	 * KVM should never use VM86 to virtualize Real Mode when L2 is active,
+	 * as using VM86 is unnecessary if unrestricted guest is enabled, and
+	 * if unrestricted guest is disabled, VM-Enter (from L1) with CR0.PG=0
+	 * should VM-Fail and KVM should reject userspace attempts to stuff
+	 * CR0.PG=0 when L2 is active.
+	 */
+	WARN_ON_ONCE(is_guest_mode(vcpu));
+
 	vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_TR], VCPU_SREG_TR);
 	vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_ES], VCPU_SREG_ES);
 	vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_DS], VCPU_SREG_DS);
@@ -3165,6 +3174,17 @@ void ept_save_pdptrs(struct kvm_vcpu *vc
 #define CR3_EXITING_BITS (CPU_BASED_CR3_LOAD_EXITING | \
 			  CPU_BASED_CR3_STORE_EXITING)
 
+static bool vmx_is_valid_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
+{
+	if (is_guest_mode(vcpu))
+		return nested_guest_cr0_valid(vcpu, cr0);
+
+	if (to_vmx(vcpu)->nested.vmxon)
+		return nested_host_cr0_valid(vcpu, cr0);
+
+	return true;
+}
+
 void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
@@ -5316,18 +5336,11 @@ static int handle_set_cr0(struct kvm_vcp
 		val = (val & ~vmcs12->cr0_guest_host_mask) |
 			(vmcs12->guest_cr0 & vmcs12->cr0_guest_host_mask);
 
-		if (!nested_guest_cr0_valid(vcpu, val))
-			return 1;
-
 		if (kvm_set_cr0(vcpu, val))
 			return 1;
 		vmcs_writel(CR0_READ_SHADOW, orig_val);
 		return 0;
 	} else {
-		if (to_vmx(vcpu)->nested.vmxon &&
-		    !nested_host_cr0_valid(vcpu, val))
-			return 1;
-
 		return kvm_set_cr0(vcpu, val);
 	}
 }
@@ -8117,6 +8130,7 @@ static struct kvm_x86_ops vmx_x86_ops __
 	.set_segment = vmx_set_segment,
 	.get_cpl = vmx_get_cpl,
 	.get_cs_db_l_bits = vmx_get_cs_db_l_bits,
+	.is_valid_cr0 = vmx_is_valid_cr0,
 	.set_cr0 = vmx_set_cr0,
 	.is_valid_cr4 = vmx_is_valid_cr4,
 	.set_cr4 = vmx_set_cr4,
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -908,6 +908,22 @@ int load_pdptrs(struct kvm_vcpu *vcpu, u
 }
 EXPORT_SYMBOL_GPL(load_pdptrs);
 
+static bool kvm_is_valid_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
+{
+#ifdef CONFIG_X86_64
+	if (cr0 & 0xffffffff00000000UL)
+		return false;
+#endif
+
+	if ((cr0 & X86_CR0_NW) && !(cr0 & X86_CR0_CD))
+		return false;
+
+	if ((cr0 & X86_CR0_PG) && !(cr0 & X86_CR0_PE))
+		return false;
+
+	return static_call(kvm_x86_is_valid_cr0)(vcpu, cr0);
+}
+
 void kvm_post_set_cr0(struct kvm_vcpu *vcpu, unsigned long old_cr0, unsigned long cr0)
 {
 	/*
@@ -948,20 +964,13 @@ int kvm_set_cr0(struct kvm_vcpu *vcpu, u
 {
 	unsigned long old_cr0 = kvm_read_cr0(vcpu);
 
-	cr0 |= X86_CR0_ET;
-
-#ifdef CONFIG_X86_64
-	if (cr0 & 0xffffffff00000000UL)
+	if (!kvm_is_valid_cr0(vcpu, cr0))
 		return 1;
-#endif
-
-	cr0 &= ~CR0_RESERVED_BITS;
 
-	if ((cr0 & X86_CR0_NW) && !(cr0 & X86_CR0_CD))
-		return 1;
+	cr0 |= X86_CR0_ET;
 
-	if ((cr0 & X86_CR0_PG) && !(cr0 & X86_CR0_PE))
-		return 1;
+	/* Write to CR0 reserved bits are ignored, even on Intel. */
+	cr0 &= ~CR0_RESERVED_BITS;
 
 #ifdef CONFIG_X86_64
 	if ((vcpu->arch.efer & EFER_LME) && !is_paging(vcpu) &&
@@ -11532,7 +11541,8 @@ static bool kvm_is_valid_sregs(struct kv
 			return false;
 	}
 
-	return kvm_is_valid_cr4(vcpu, sregs->cr4);
+	return kvm_is_valid_cr4(vcpu, sregs->cr4) &&
+	       kvm_is_valid_cr0(vcpu, sregs->cr0);
 }
 
 static int __set_sregs_common(struct kvm_vcpu *vcpu, struct kvm_sregs *sregs,

[PATCH 6.1 153/228] serial: qcom-geni: drop bogus runtime pm state update

[Greg Kroah-Hartman]

From: Johan Hovold <johan+linaro@kernel.org>

commit 4dd8752a14ca0303fbdf0a6c68ff65f0a50bd2fa upstream.

The runtime PM state should not be changed by drivers that do not
implement runtime PM even if it happens to work around a bug in PM core.

With the wake irq arming now fixed, drop the bogus runtime PM state
update which left the device in active state (and could potentially
prevent a parent device from suspending).

Fixes: f3974413cf02 ("tty: serial: qcom_geni_serial: Wakeup IRQ cleanup")
Cc: 5.6+ <stable@vger.kernel.org> # 5.6+
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/qcom_geni_serial.c |    7 -------
 1 file changed, 7 deletions(-)

--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -1495,13 +1495,6 @@ static int qcom_geni_serial_probe(struct
 	if (ret)
 		return ret;
 
-	/*
-	 * Set pm_runtime status as ACTIVE so that wakeup_irq gets
-	 * enabled/disabled from dev_pm_arm_wake_irq during system
-	 * suspend/resume respectively.
-	 */
-	pm_runtime_set_active(&pdev->dev);
-
 	if (port->wakeup_irq > 0) {
 		device_init_wakeup(&pdev->dev, true);
 		ret = dev_pm_set_dedicated_wake_irq(&pdev->dev,

[PATCH 6.1 154/228] serial: 8250_dw: Preserve original value of DLF register

[Greg Kroah-Hartman]

From: Ruihong Luo <colorsu1922@gmail.com>

commit 748c5ea8b8796ae8ee80b8d3a3d940570b588d59 upstream.

Preserve the original value of the Divisor Latch Fraction (DLF) register.
When the DLF register is modified without preservation, it can disrupt
the baudrate settings established by firmware or bootloader, leading to
data corruption and the generation of unreadable or distorted characters.

Fixes: 701c5e73b296 ("serial: 8250_dw: add fractional divisor support")
Cc: stable <stable@kernel.org>
Signed-off-by: Ruihong Luo <colorsu1922@gmail.com>
Link: https://lore.kernel.org/stable/20230713004235.35904-1-colorsu1922%40gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230713004235.35904-1-colorsu1922@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_dwlib.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/tty/serial/8250/8250_dwlib.c
+++ b/drivers/tty/serial/8250/8250_dwlib.c
@@ -244,7 +244,7 @@ void dw8250_setup_port(struct uart_port
 	struct dw8250_port_data *pd = p->private_data;
 	struct dw8250_data *data = to_dw8250_data(pd);
 	struct uart_8250_port *up = up_to_u8250p(p);
-	u32 reg;
+	u32 reg, old_dlf;
 
 	pd->hw_rs485_support = dw8250_detect_rs485_hw(p);
 	if (pd->hw_rs485_support) {
@@ -270,9 +270,11 @@ void dw8250_setup_port(struct uart_port
 	dev_dbg(p->dev, "Designware UART version %c.%c%c\n",
 		(reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff);
 
+	/* Preserve value written by firmware or bootloader  */
+	old_dlf = dw8250_readl_ext(p, DW_UART_DLF);
 	dw8250_writel_ext(p, DW_UART_DLF, ~0U);
 	reg = dw8250_readl_ext(p, DW_UART_DLF);
-	dw8250_writel_ext(p, DW_UART_DLF, 0);
+	dw8250_writel_ext(p, DW_UART_DLF, old_dlf);
 
 	if (reg) {
 		pd->dlf_size = fls(reg);

[PATCH 6.1 155/228] serial: sifive: Fix sifive_serial_console_setup() section

[Greg Kroah-Hartman]

From: Samuel Holland <samuel.holland@sifive.com>

commit 9b8fef6345d5487137d4193bb0a0eae2203c284e upstream.

This function is called indirectly from the platform driver probe
function. Even if the driver is built in, it may be probed after
free_initmem() due to deferral or unbinding/binding via sysfs.
Thus the function cannot be marked as __init.

Fixes: 45c054d0815b ("tty: serial: add driver for the SiFive UART")
Cc: stable <stable@kernel.org>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20230624060159.3401369-1-samuel.holland@sifive.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/sifive.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/sifive.c
+++ b/drivers/tty/serial/sifive.c
@@ -832,7 +832,7 @@ static void sifive_serial_console_write(
 	local_irq_restore(flags);
 }
 
-static int __init sifive_serial_console_setup(struct console *co, char *options)
+static int sifive_serial_console_setup(struct console *co, char *options)
 {
 	struct sifive_serial_port *ssp;
 	int baud = SIFIVE_DEFAULT_BAUD_RATE;

[PATCH 6.1 156/228] USB: serial: option: support Quectel EM060K_128

[Greg Kroah-Hartman]

From: Jerry Meng <jerry-meng@foxmail.com>

commit 4f7cab49cecee16120d27c1734cfdf3d6c0e5329 upstream.

EM060K_128 is EM060K's sub-model, having the same name "Quectel EM060K-GL"

MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL

T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  8 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=0128 Rev= 5.04
S:  Manufacturer=Quectel
S:  Product=Quectel EM060K-GL
S:  SerialNumber=f6fa08b6
C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E:  Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Jerry Meng <jerry-meng@foxmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -251,6 +251,7 @@ static void option_instat_callback(struc
 #define QUECTEL_PRODUCT_EM061K_LTA		0x0123
 #define QUECTEL_PRODUCT_EM061K_LMS		0x0124
 #define QUECTEL_PRODUCT_EC25			0x0125
+#define QUECTEL_PRODUCT_EM060K_128		0x0128
 #define QUECTEL_PRODUCT_EG91			0x0191
 #define QUECTEL_PRODUCT_EG95			0x0195
 #define QUECTEL_PRODUCT_BG96			0x0296
@@ -1197,6 +1198,9 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0x00, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x30) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0xff, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0xff, 0x30) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0x00, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0xff, 0x40) },

[PATCH 6.1 157/228] USB: serial: option: add Quectel EC200A module support

[Greg Kroah-Hartman]

From: Mohsen Tahmasebi <moh53n@moh53n.ir>

commit 857ea9005806e2a458016880278f98715873e977 upstream.

Add Quectel EC200A "DIAG, AT, MODEM":

0x6005: ECM / RNDIS + DIAG + AT + MODEM

T:  Bus=01 Lev=01 Prnt=02 Port=05 Cnt=01 Dev#=  8 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=6005 Rev=03.18
S:  Manufacturer=Android
S:  Product=Android
S:  SerialNumber=0000
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=87(I) Atr=03(Int.) MxPS=  64 Ivl=4096ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=89(I) Atr=03(Int.) MxPS=  64 Ivl=4096ms
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=88(I) Atr=03(Int.) MxPS=  64 Ivl=4096ms

Signed-off-by: Mohsen Tahmasebi <moh53n@moh53n.ir>
Tested-by: Mostafa Ghofrani <mostafaghrr@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -269,6 +269,7 @@ static void option_instat_callback(struc
 #define QUECTEL_PRODUCT_RM520N			0x0801
 #define QUECTEL_PRODUCT_EC200U			0x0901
 #define QUECTEL_PRODUCT_EC200S_CN		0x6002
+#define QUECTEL_PRODUCT_EC200A			0x6005
 #define QUECTEL_PRODUCT_EM061K_LWW		0x6008
 #define QUECTEL_PRODUCT_EM061K_LCN		0x6009
 #define QUECTEL_PRODUCT_EC200T			0x6026
@@ -1229,6 +1230,7 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, 0x0900, 0xff, 0, 0), /* RM500U-CN */
 	  .driver_info = ZLP },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200A, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200U, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) },

[PATCH 6.1 158/228] USB: serial: simple: add Kaufmann RKS+CAN VCP

[Greg Kroah-Hartman]

From: Oliver Neukum <oneukum@suse.com>

commit dd92c8a1f99bcd166204ffc219ea5a23dd65d64f upstream.

Add the device and product ID for this CAN bus interface / license
dongle. The device is usable either directly from user space or can be
attached to a kernel CAN interface with slcan_attach.

Reported-by: Kaufmann Automotive GmbH <info@kaufmann-automotive.ch>
Tested-by: Kaufmann Automotive GmbH <info@kaufmann-automotive.ch>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
[ johan: amend commit message and move entries in sort order ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/usb-serial-simple.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/usb/serial/usb-serial-simple.c
+++ b/drivers/usb/serial/usb-serial-simple.c
@@ -63,6 +63,11 @@ DEVICE(flashloader, FLASHLOADER_IDS);
 					0x01) }
 DEVICE(google, GOOGLE_IDS);
 
+/* KAUFMANN RKS+CAN VCP */
+#define KAUFMANN_IDS()			\
+	{ USB_DEVICE(0x16d0, 0x0870) }
+DEVICE(kaufmann, KAUFMANN_IDS);
+
 /* Libtransistor USB console */
 #define LIBTRANSISTOR_IDS()			\
 	{ USB_DEVICE(0x1209, 0x8b00) }
@@ -124,6 +129,7 @@ static struct usb_serial_driver * const
 	&funsoft_device,
 	&flashloader_device,
 	&google_device,
+	&kaufmann_device,
 	&libtransistor_device,
 	&vivopay_device,
 	&moto_modem_device,
@@ -142,6 +148,7 @@ static const struct usb_device_id id_tab
 	FUNSOFT_IDS(),
 	FLASHLOADER_IDS(),
 	GOOGLE_IDS(),
+	KAUFMANN_IDS(),
 	LIBTRANSISTOR_IDS(),
 	VIVOPAY_IDS(),
 	MOTO_IDS(),

[PATCH 6.1 159/228] USB: serial: simple: sort driver entries

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit d245aedc00775c4d7265a9f4522cc4e1fd34d102 upstream.

Sort the driver symbols alphabetically in order to make it more obvious
where new driver entries should be added.

Cc: stable@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/usb-serial-simple.c |   66 ++++++++++++++++-----------------
 1 file changed, 33 insertions(+), 33 deletions(-)

--- a/drivers/usb/serial/usb-serial-simple.c
+++ b/drivers/usb/serial/usb-serial-simple.c
@@ -38,16 +38,6 @@ static struct usb_serial_driver vendor##
 	{ USB_DEVICE(0x0a21, 0x8001) }	/* MMT-7305WW */
 DEVICE(carelink, CARELINK_IDS);
 
-/* ZIO Motherboard USB driver */
-#define ZIO_IDS()			\
-	{ USB_DEVICE(0x1CBE, 0x0103) }
-DEVICE(zio, ZIO_IDS);
-
-/* Funsoft Serial USB driver */
-#define FUNSOFT_IDS()			\
-	{ USB_DEVICE(0x1404, 0xcddc) }
-DEVICE(funsoft, FUNSOFT_IDS);
-
 /* Infineon Flashloader driver */
 #define FLASHLOADER_IDS()		\
 	{ USB_DEVICE_INTERFACE_CLASS(0x058b, 0x0041, USB_CLASS_CDC_DATA) }, \
@@ -55,6 +45,11 @@ DEVICE(funsoft, FUNSOFT_IDS);
 	{ USB_DEVICE(0x8087, 0x0801) }
 DEVICE(flashloader, FLASHLOADER_IDS);
 
+/* Funsoft Serial USB driver */
+#define FUNSOFT_IDS()			\
+	{ USB_DEVICE(0x1404, 0xcddc) }
+DEVICE(funsoft, FUNSOFT_IDS);
+
 /* Google Serial USB SubClass */
 #define GOOGLE_IDS()						\
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x18d1,			\
@@ -63,6 +58,11 @@ DEVICE(flashloader, FLASHLOADER_IDS);
 					0x01) }
 DEVICE(google, GOOGLE_IDS);
 
+/* HP4x (48/49) Generic Serial driver */
+#define HP4X_IDS()			\
+	{ USB_DEVICE(0x03f0, 0x0121) }
+DEVICE(hp4x, HP4X_IDS);
+
 /* KAUFMANN RKS+CAN VCP */
 #define KAUFMANN_IDS()			\
 	{ USB_DEVICE(0x16d0, 0x0870) }
@@ -73,11 +73,6 @@ DEVICE(kaufmann, KAUFMANN_IDS);
 	{ USB_DEVICE(0x1209, 0x8b00) }
 DEVICE(libtransistor, LIBTRANSISTOR_IDS);
 
-/* ViVOpay USB Serial Driver */
-#define VIVOPAY_IDS()			\
-	{ USB_DEVICE(0x1d5f, 0x1004) }	/* ViVOpay 8800 */
-DEVICE(vivopay, VIVOPAY_IDS);
-
 /* Motorola USB Phone driver */
 #define MOTO_IDS()			\
 	{ USB_DEVICE(0x05c6, 0x3197) },	/* unknown Motorola phone */	\
@@ -106,10 +101,10 @@ DEVICE(nokia, NOKIA_IDS);
 	{ USB_DEVICE(0x09d7, 0x0100) }	/* NovAtel FlexPack GPS */
 DEVICE_N(novatel_gps, NOVATEL_IDS, 3);
 
-/* HP4x (48/49) Generic Serial driver */
-#define HP4X_IDS()			\
-	{ USB_DEVICE(0x03f0, 0x0121) }
-DEVICE(hp4x, HP4X_IDS);
+/* Siemens USB/MPI adapter */
+#define SIEMENS_IDS()			\
+	{ USB_DEVICE(0x908, 0x0004) }
+DEVICE(siemens_mpi, SIEMENS_IDS);
 
 /* Suunto ANT+ USB Driver */
 #define SUUNTO_IDS()			\
@@ -117,47 +112,52 @@ DEVICE(hp4x, HP4X_IDS);
 	{ USB_DEVICE(0x0fcf, 0x1009) } /* Dynastream ANT USB-m Stick */
 DEVICE(suunto, SUUNTO_IDS);
 
-/* Siemens USB/MPI adapter */
-#define SIEMENS_IDS()			\
-	{ USB_DEVICE(0x908, 0x0004) }
-DEVICE(siemens_mpi, SIEMENS_IDS);
+/* ViVOpay USB Serial Driver */
+#define VIVOPAY_IDS()			\
+	{ USB_DEVICE(0x1d5f, 0x1004) }	/* ViVOpay 8800 */
+DEVICE(vivopay, VIVOPAY_IDS);
+
+/* ZIO Motherboard USB driver */
+#define ZIO_IDS()			\
+	{ USB_DEVICE(0x1CBE, 0x0103) }
+DEVICE(zio, ZIO_IDS);
 
 /* All of the above structures mushed into two lists */
 static struct usb_serial_driver * const serial_drivers[] = {
 	&carelink_device,
-	&zio_device,
-	&funsoft_device,
 	&flashloader_device,
+	&funsoft_device,
 	&google_device,
+	&hp4x_device,
 	&kaufmann_device,
 	&libtransistor_device,
-	&vivopay_device,
 	&moto_modem_device,
 	&motorola_tetra_device,
 	&nokia_device,
 	&novatel_gps_device,
-	&hp4x_device,
-	&suunto_device,
 	&siemens_mpi_device,
+	&suunto_device,
+	&vivopay_device,
+	&zio_device,
 	NULL
 };
 
 static const struct usb_device_id id_table[] = {
 	CARELINK_IDS(),
-	ZIO_IDS(),
-	FUNSOFT_IDS(),
 	FLASHLOADER_IDS(),
+	FUNSOFT_IDS(),
 	GOOGLE_IDS(),
+	HP4X_IDS(),
 	KAUFMANN_IDS(),
 	LIBTRANSISTOR_IDS(),
-	VIVOPAY_IDS(),
 	MOTO_IDS(),
 	MOTOROLA_TETRA_IDS(),
 	NOKIA_IDS(),
 	NOVATEL_IDS(),
-	HP4X_IDS(),
-	SUUNTO_IDS(),
 	SIEMENS_IDS(),
+	SUUNTO_IDS(),
+	VIVOPAY_IDS(),
+	ZIO_IDS(),
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);

[PATCH 6.1 160/228] can: gs_usb: gs_can_close(): add missing set of CAN state to CAN_STATE_STOPPED

[Greg Kroah-Hartman]

From: Marc Kleine-Budde <mkl@pengutronix.de>

commit f8a2da6ec2417cca169fa85a8ab15817bccbb109 upstream.

After an initial link up the CAN device is in ERROR-ACTIVE mode. Due
to a missing CAN_STATE_STOPPED in gs_can_close() it doesn't change to
STOPPED after a link down:

| ip link set dev can0 up
| ip link set dev can0 down
| ip --details link show can0
| 13: can0: <NOARP,ECHO> mtu 16 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 10
|     link/can  promiscuity 0 allmulti 0 minmtu 0 maxmtu 0
|     can state ERROR-ACTIVE restart-ms 1000

Add missing assignment of CAN_STATE_STOPPED in gs_can_close().

Cc: stable@vger.kernel.org
Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices")
Link: https://lore.kernel.org/all/20230718-gs_usb-fix-can-state-v1-1-f19738ae2c23@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/can/usb/gs_usb.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/can/usb/gs_usb.c
+++ b/drivers/net/can/usb/gs_usb.c
@@ -989,6 +989,8 @@ static int gs_can_close(struct net_devic
 	usb_kill_anchored_urbs(&dev->tx_submitted);
 	atomic_set(&dev->active_tx_urbs, 0);
 
+	dev->can.state = CAN_STATE_STOPPED;
+
 	/* reset the device */
 	rc = gs_cmd_reset(dev);
 	if (rc < 0)

[PATCH 6.1 161/228] usb: typec: Set port->pd before adding device for typec_port

[Greg Kroah-Hartman]

From: Kyle Tso <kyletso@google.com>

commit b33ebb2415e7e0a55ee3d049c2890d3a3e3805b6 upstream.

When calling device_add in the registration of typec_port, it will do
the NULL check on usb_power_delivery handle in typec_port for the
visibility of the device attributes. It is always NULL because port->pd
is set in typec_port_set_usb_power_delivery which is later than the
device_add call.

Set port->pd before device_add and only link the device after that.

Fixes: a7cff92f0635 ("usb: typec: USB Power Delivery helpers for ports and partners")
Cc: stable@vger.kernel.org
Signed-off-by: Kyle Tso <kyletso@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230623151036.3955013-2-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/typec/class.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/usb/typec/class.c
+++ b/drivers/usb/typec/class.c
@@ -2259,6 +2259,8 @@ struct typec_port *typec_register_port(s
 		return ERR_PTR(ret);
 	}
 
+	port->pd = cap->pd;
+
 	ret = device_add(&port->dev);
 	if (ret) {
 		dev_err(parent, "failed to register port (%d)\n", ret);
@@ -2266,7 +2268,7 @@ struct typec_port *typec_register_port(s
 		return ERR_PTR(ret);
 	}
 
-	ret = typec_port_set_usb_power_delivery(port, cap->pd);
+	ret = usb_power_delivery_link_device(port->pd, &port->dev);
 	if (ret) {
 		dev_err(&port->dev, "failed to link pd\n");
 		device_unregister(&port->dev);

[PATCH 6.1 162/228] usb: typec: Iterate pds array when showing the pd list

[Greg Kroah-Hartman]

From: Kyle Tso <kyletso@google.com>

commit 4b642dc9829507e4afabc03d32a18abbdb192c5e upstream.

The pointers of each usb_power_delivery handles are stored in "pds"
array returned from the pd_get ops but not in the adjacent memory
calculated from "pd". Get the handles from "pds" array directly instead
of deriving them from "pd".

Fixes: a7cff92f0635 ("usb: typec: USB Power Delivery helpers for ports and partners")
Cc: stable@vger.kernel.org
Signed-off-by: Kyle Tso <kyletso@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230623151036.3955013-3-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/typec/class.c |   11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

--- a/drivers/usb/typec/class.c
+++ b/drivers/usb/typec/class.c
@@ -1258,8 +1258,7 @@ static ssize_t select_usb_power_delivery
 {
 	struct typec_port *port = to_typec_port(dev);
 	struct usb_power_delivery **pds;
-	struct usb_power_delivery *pd;
-	int ret = 0;
+	int i, ret = 0;
 
 	if (!port->ops || !port->ops->pd_get)
 		return -EOPNOTSUPP;
@@ -1268,11 +1267,11 @@ static ssize_t select_usb_power_delivery
 	if (!pds)
 		return 0;
 
-	for (pd = pds[0]; pd; pd++) {
-		if (pd == port->pd)
-			ret += sysfs_emit(buf + ret, "[%s] ", dev_name(&pd->dev));
+	for (i = 0; pds[i]; i++) {
+		if (pds[i] == port->pd)
+			ret += sysfs_emit(buf + ret, "[%s] ", dev_name(&pds[i]->dev));
 		else
-			ret += sysfs_emit(buf + ret, "%s ", dev_name(&pd->dev));
+			ret += sysfs_emit(buf + ret, "%s ", dev_name(&pds[i]->dev));
 	}
 
 	buf[ret - 1] = '\n';

[PATCH 6.1 163/228] usb: typec: Use sysfs_emit_at when concatenating the string

[Greg Kroah-Hartman]

From: Kyle Tso <kyletso@google.com>

commit 609fded3f91972ada551c141c5d04a71704f8967 upstream.

The buffer address used in sysfs_emit should be aligned to PAGE_SIZE.
Use sysfs_emit_at instead to offset the buffer.

Fixes: a7cff92f0635 ("usb: typec: USB Power Delivery helpers for ports and partners")
Cc: stable@vger.kernel.org
Signed-off-by: Kyle Tso <kyletso@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230623151036.3955013-4-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/typec/class.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/typec/class.c
+++ b/drivers/usb/typec/class.c
@@ -1269,9 +1269,9 @@ static ssize_t select_usb_power_delivery
 
 	for (i = 0; pds[i]; i++) {
 		if (pds[i] == port->pd)
-			ret += sysfs_emit(buf + ret, "[%s] ", dev_name(&pds[i]->dev));
+			ret += sysfs_emit_at(buf, ret, "[%s] ", dev_name(&pds[i]->dev));
 		else
-			ret += sysfs_emit(buf + ret, "%s ", dev_name(&pds[i]->dev));
+			ret += sysfs_emit_at(buf, ret, "%s ", dev_name(&pds[i]->dev));
 	}
 
 	buf[ret - 1] = '\n';

[PATCH 6.1 164/228] Revert "usb: dwc3: core: Enable AutoRetry feature in the controller"

[Greg Kroah-Hartman]

From: Jakub Vanek <linuxtardis@gmail.com>

commit 734ae15ab95a18d3d425fc9cb38b7a627d786f08 upstream.

This reverts commit b138e23d3dff90c0494925b4c1874227b81bddf7.

AutoRetry has been found to sometimes cause controller freezes when
communicating with buggy USB devices.

This controller feature allows the controller in host mode to send
non-terminating/burst retry ACKs instead of terminating retry ACKs
to devices when a transaction error (CRC error or overflow) occurs.

Unfortunately, if the USB device continues to respond with a CRC error,
the controller will not complete endpoint-related commands while it
keeps trying to auto-retry. [3] The xHCI driver will notice this once
it tries to abort the transfer using a Stop Endpoint command and
does not receive a completion in time. [1]
This situation is reported to dmesg:

[sda] tag#29 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[sda] tag#29 CDB: opcode=0x28 28 00 00 69 42 80 00 00 48 00
xhci-hcd: xHCI host not responding to stop endpoint command
xhci-hcd: xHCI host controller not responding, assume dead
xhci-hcd: HC died; cleaning up

Some users observed this problem on an Odroid HC2 with the JMS578
USB3-to-SATA bridge. The issue can be triggered by starting
a read-heavy workload on an attached SSD. After a while, the host
controller would die and the SSD would disappear from the system. [1]

Further analysis by Synopsys determined that controller revisions
other than the one in Odroid HC2 are also affected by this.
The recommended solution was to disable AutoRetry altogether.
This change does not have a noticeable performance impact. [2]

Revert the enablement commit. This will keep the AutoRetry bit in
the default state configured during SoC design [2].

Fixes: b138e23d3dff ("usb: dwc3: core: Enable AutoRetry feature in the controller")
Link: https://lore.kernel.org/r/a21f34c04632d250cd0a78c7c6f4a1c9c7a43142.camel@gmail.com/ [1]
Link: https://lore.kernel.org/r/20230711214834.kyr6ulync32d4ktk@synopsys.com/ [2]
Link: https://lore.kernel.org/r/20230712225518.2smu7wse6djc7l5o@synopsys.com/ [3]
Cc: stable@vger.kernel.org
Cc: Mauro Ribeiro <mauro.ribeiro@hardkernel.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Jakub Vanek <linuxtardis@gmail.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230714122419.27741-1-linuxtardis@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/core.c |   16 ----------------
 drivers/usb/dwc3/core.h |    3 ---
 2 files changed, 19 deletions(-)

--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1241,22 +1241,6 @@ static int dwc3_core_init(struct dwc3 *d
 		dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
 	}
 
-	if (dwc->dr_mode == USB_DR_MODE_HOST ||
-	    dwc->dr_mode == USB_DR_MODE_OTG) {
-		reg = dwc3_readl(dwc->regs, DWC3_GUCTL);
-
-		/*
-		 * Enable Auto retry Feature to make the controller operating in
-		 * Host mode on seeing transaction errors(CRC errors or internal
-		 * overrun scenerios) on IN transfers to reply to the device
-		 * with a non-terminating retry ACK (i.e, an ACK transcation
-		 * packet with Retry=1 & Nump != 0)
-		 */
-		reg |= DWC3_GUCTL_HSTINAUTORETRY;
-
-		dwc3_writel(dwc->regs, DWC3_GUCTL, reg);
-	}
-
 	/*
 	 * Must config both number of packets and max burst settings to enable
 	 * RX and/or TX threshold.
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -254,9 +254,6 @@
 #define DWC3_GCTL_GBLHIBERNATIONEN	BIT(1)
 #define DWC3_GCTL_DSBLCLKGTNG		BIT(0)
 
-/* Global User Control Register */
-#define DWC3_GUCTL_HSTINAUTORETRY	BIT(14)
-
 /* Global User Control 1 Register */
 #define DWC3_GUCTL1_DEV_DECOUPLE_L1L2_EVT	BIT(31)
 #define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS	BIT(28)

[PATCH 6.1 165/228] usb: dwc3: pci: skip BYT GPIO lookup table for hardwired phy

[Greg Kroah-Hartman]

From: Gratian Crisan <gratian.crisan@ni.com>

commit b32b8f2b9542d8039f5468303a6ca78c1b5611a5 upstream.

Hardware based on the Bay Trail / BYT SoCs require an external ULPI phy for
USB device-mode. The phy chip usually has its 'reset' and 'chip select'
lines connected to GPIOs described by ACPI fwnodes in the DSDT table.

Because of hardware with missing ACPI resources for the 'reset' and 'chip
select' GPIOs commit 5741022cbdf3 ("usb: dwc3: pci: Add GPIO lookup table
on platforms without ACPI GPIO resources") introduced a fallback
gpiod_lookup_table with hard-coded mappings for Bay Trail devices.

However there are existing Bay Trail based devices, like the National
Instruments cRIO-903x series, where the phy chip has its 'reset' and
'chip-select' lines always asserted in hardware via resistor pull-ups. On
this hardware the phy chip is always enabled and the ACPI dsdt table is
missing information not only for the 'chip-select' and 'reset' lines but
also for the BYT GPIO controller itself "INT33FC".

With the introduction of the gpiod_lookup_table initializing the USB
device-mode on these hardware now errors out. The error comes from the
gpiod_get_optional() calls in dwc3_pci_quirks() which will now return an
-ENOENT error due to the missing ACPI entry for the INT33FC gpio controller
used in the aforementioned table.

This hardware used to work before because gpiod_get_optional() will return
NULL instead of -ENOENT if no GPIO has been assigned to the requested
function. The dwc3_pci_quirks() code for setting the 'cs' and 'reset' GPIOs
was then skipped (due to the NULL return). This is the correct behavior in
cases where the phy chip is hardwired and there are no GPIOs to control.

Since the gpiod_lookup_table relies on the presence of INT33FC fwnode
in ACPI tables only add the table if we know the entry for the INT33FC
gpio controller is present. This allows Bay Trail based devices with
hardwired dwc3 ULPI phys to continue working.

Fixes: 5741022cbdf3 ("usb: dwc3: pci: Add GPIO lookup table on platforms without ACPI GPIO resources")
Cc: stable <stable@kernel.org>
Signed-off-by: Gratian Crisan <gratian.crisan@ni.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230726184555.218091-2-gratian.crisan@ni.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/dwc3-pci.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -233,10 +233,12 @@ static int dwc3_pci_quirks(struct dwc3_p
 
 			/*
 			 * A lot of BYT devices lack ACPI resource entries for
-			 * the GPIOs, add a fallback mapping to the reference
+			 * the GPIOs. If the ACPI entry for the GPIO controller
+			 * is present add a fallback mapping to the reference
 			 * design GPIOs which all boards seem to use.
 			 */
-			gpiod_add_lookup_table(&platform_bytcr_gpios);
+			if (acpi_dev_present("INT33FC", NULL, -1))
+				gpiod_add_lookup_table(&platform_bytcr_gpios);
 
 			/*
 			 * These GPIOs will turn on the USB2 PHY. Note that we have to

[PATCH 6.1 166/228] usb: dwc3: dont reset device side if dwc3 was configured as host-only

[Greg Kroah-Hartman]

From: Jisheng Zhang <jszhang@kernel.org>

commit e835c0a4e23c38531dcee5ef77e8d1cf462658c7 upstream.

Commit c4a5153e87fd ("usb: dwc3: core: Power-off core/PHYs on
system_suspend in host mode") replaces check for HOST only dr_mode with
current_dr_role. But during booting, the current_dr_role isn't
initialized, thus the device side reset is always issued even if dwc3
was configured as host-only. What's more, on some platforms with host
only dwc3, aways issuing device side reset by accessing device register
block can cause kernel panic.

Fixes: c4a5153e87fd ("usb: dwc3: core: Power-off core/PHYs on system_suspend in host mode")
Cc: stable <stable@kernel.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230627162018.739-1-jszhang@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/core.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -277,9 +277,9 @@ int dwc3_core_soft_reset(struct dwc3 *dw
 	/*
 	 * We're resetting only the device side because, if we're in host mode,
 	 * XHCI driver will reset the host block. If dwc3 was configured for
-	 * host-only mode, then we can return early.
+	 * host-only mode or current role is host, then we can return early.
 	 */
-	if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST)
+	if (dwc->dr_mode == USB_DR_MODE_HOST || dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST)
 		return 0;
 
 	reg = dwc3_readl(dwc->regs, DWC3_DCTL);

[PATCH 6.1 167/228] usb: misc: ehset: fix wrong if condition

[Greg Kroah-Hartman]

From: Xu Yang <xu.yang_2@nxp.com>

commit 7f2327666a9080e428166964e37548b0168cd5e9 upstream.

A negative number from ret means the host controller had failed to send
usb message and 0 means succeed. Therefore, the if logic is wrong here
and this patch will fix it.

Fixes: f2b42379c576 ("usb: misc: ehset: Rework test mode entry")
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20230705095231.457860-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/misc/ehset.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/usb/misc/ehset.c
+++ b/drivers/usb/misc/ehset.c
@@ -77,7 +77,7 @@ static int ehset_probe(struct usb_interf
 	switch (test_pid) {
 	case TEST_SE0_NAK_PID:
 		ret = ehset_prepare_port_for_testing(hub_udev, portnum);
-		if (!ret)
+		if (ret < 0)
 			break;
 		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
 					   USB_RT_PORT, USB_PORT_FEAT_TEST,
@@ -86,7 +86,7 @@ static int ehset_probe(struct usb_interf
 		break;
 	case TEST_J_PID:
 		ret = ehset_prepare_port_for_testing(hub_udev, portnum);
-		if (!ret)
+		if (ret < 0)
 			break;
 		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
 					   USB_RT_PORT, USB_PORT_FEAT_TEST,
@@ -95,7 +95,7 @@ static int ehset_probe(struct usb_interf
 		break;
 	case TEST_K_PID:
 		ret = ehset_prepare_port_for_testing(hub_udev, portnum);
-		if (!ret)
+		if (ret < 0)
 			break;
 		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
 					   USB_RT_PORT, USB_PORT_FEAT_TEST,
@@ -104,7 +104,7 @@ static int ehset_probe(struct usb_interf
 		break;
 	case TEST_PACKET_PID:
 		ret = ehset_prepare_port_for_testing(hub_udev, portnum);
-		if (!ret)
+		if (ret < 0)
 			break;
 		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
 					   USB_RT_PORT, USB_PORT_FEAT_TEST,

[PATCH 6.1 168/228] usb: ohci-at91: Fix the unhandle interrupt when resume

[Greg Kroah-Hartman]

From: Guiting Shen <aarongt.shen@gmail.com>

commit c55afcbeaa7a6f4fffdbc999a9bf3f0b29a5186f upstream.

The ohci_hcd_at91_drv_suspend() sets ohci->rh_state to OHCI_RH_HALTED when
suspend which will let the ohci_irq() skip the interrupt after resume. And
nobody to handle this interrupt.

According to the comment in ohci_hcd_at91_drv_suspend(), it need to reset
when resume from suspend(MEM) to fix by setting "hibernated" argument of
ohci_resume().

Signed-off-by: Guiting Shen <aarongt.shen@gmail.com>
Cc: stable <stable@kernel.org>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230626152713.18950-1-aarongt.shen@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/ohci-at91.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -673,7 +673,13 @@ ohci_hcd_at91_drv_resume(struct device *
 	else
 		at91_start_clock(ohci_at91);
 
-	ohci_resume(hcd, false);
+	/*
+	 * According to the comment in ohci_hcd_at91_drv_suspend()
+	 * we need to do a reset if the 48Mhz clock was stopped,
+	 * that is, if ohci_at91->wakeup is clear. Tell ohci_resume()
+	 * to reset in this case by setting its "hibernated" flag.
+	 */
+	ohci_resume(hcd, !ohci_at91->wakeup);
 
 	return 0;
 }

[PATCH 6.1 169/228] USB: quirks: add quirk for Focusrite Scarlett

[Greg Kroah-Hartman]

From: Łukasz Bartosik <lb@semihalf.com>

commit 9dc162e22387080e2d06de708b89920c0e158c9a upstream.

The Focusrite Scarlett audio device does not behave correctly during
resumes. Below is what happens during every resume (captured with
Beagle 5000):

<Suspend>
<Resume>
<Reset>/<Chirp J>/<Tiny J>
<Reset/Target disconnected>
<High Speed>

The Scarlett disconnects and is enumerated again.

However from time to time it drops completely off the USB bus during
resume. Below is captured occurrence of such an event:

<Suspend>
<Resume>
<Reset>/<Chirp J>/<Tiny J>
<Reset>/<Chirp K>/<Tiny K>
<High Speed>
<Corrupted packet>
<Reset/Target disconnected>

To fix the condition a user has to unplug and plug the device again.

With USB_QUIRK_RESET_RESUME applied ("usbcore.quirks=1235:8211:b")
for the Scarlett audio device the issue still reproduces.

Applying USB_QUIRK_DISCONNECT_SUSPEND ("usbcore.quirks=1235:8211:m")
fixed the issue and the Scarlett audio device didn't drop off the USB
bus for ~5000 suspend/resume cycles where originally issue reproduced in
~100 or less suspend/resume cycles.

Signed-off-by: Łukasz Bartosik <lb@semihalf.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20230724112911.1802577-1-lb@semihalf.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/quirks.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -436,6 +436,10 @@ static const struct usb_device_id usb_qu
 	/* novation SoundControl XL */
 	{ USB_DEVICE(0x1235, 0x0061), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Focusrite Scarlett Solo USB */
+	{ USB_DEVICE(0x1235, 0x8211), .driver_info =
+			USB_QUIRK_DISCONNECT_SUSPEND },
+
 	/* Huawei 4G LTE module */
 	{ USB_DEVICE(0x12d1, 0x15bb), .driver_info =
 			USB_QUIRK_DISCONNECT_SUSPEND },

[PATCH 6.1 170/228] usb: cdns3: fix incorrect calculation of ep_buf_size when more than one config

[Greg Kroah-Hartman]

From: Frank Li <Frank.Li@nxp.com>

commit 2627335a1329a0d39d8d277994678571c4f21800 upstream.

Previously, the cdns3_gadget_check_config() function in the cdns3 driver
mistakenly calculated the ep_buf_size by considering only one
configuration's endpoint information because "claimed" will be clear after
call usb_gadget_check_config().

The fix involves checking the private flags EP_CLAIMED instead of relying
on the "claimed" flag.

Fixes: dce49449e04f ("usb: cdns3: allocate TX FIFO size according to composite EP number")
Cc: stable <stable@kernel.org>
Reported-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Tested-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Link: https://lore.kernel.org/r/20230707230015.494999-2-Frank.Li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/cdns3/cdns3-gadget.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/usb/cdns3/cdns3-gadget.c
+++ b/drivers/usb/cdns3/cdns3-gadget.c
@@ -3012,12 +3012,14 @@ static int cdns3_gadget_udc_stop(struct
 static int cdns3_gadget_check_config(struct usb_gadget *gadget)
 {
 	struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
+	struct cdns3_endpoint *priv_ep;
 	struct usb_ep *ep;
 	int n_in = 0;
 	int total;
 
 	list_for_each_entry(ep, &gadget->ep_list, ep_list) {
-		if (ep->claimed && (ep->address & USB_DIR_IN))
+		priv_ep = ep_to_cdns3_ep(ep);
+		if ((priv_ep->flags & EP_CLAIMED) && (ep->address & USB_DIR_IN))
 			n_in++;
 	}
 

[PATCH 6.1 171/228] usb: xhci-mtk: set the dma max_seg_size

[Greg Kroah-Hartman]

From: Ricardo Ribalda <ribalda@chromium.org>

commit 9fd10829a9eb482e192a845675ecc5480e0bfa10 upstream.

Allow devices to have dma operations beyond 64K, and avoid warnings such
as:

DMA-API: xhci-mtk 11200000.usb: mapping sg segment longer than device claims to support [len=98304] [max=65536]

Fixes: 0cbd4b34cda9 ("xhci: mediatek: support MTK xHCI host controller")
Cc: stable <stable@kernel.org>
Tested-by: Zubin Mithra <zsm@chromium.org>
Reported-by: Zubin Mithra <zsm@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20230628-mtk-usb-v2-1-c8c34eb9f229@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-mtk.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -590,6 +590,7 @@ static int xhci_mtk_probe(struct platfor
 	}
 
 	device_init_wakeup(dev, true);
+	dma_set_max_seg_size(dev, UINT_MAX);
 
 	xhci = hcd_to_xhci(hcd);
 	xhci->main_hcd = hcd;

[PATCH 6.1 172/228] Revert "usb: xhci: tegra: Fix error check"

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@linaro.org>

commit 288b4fa1798e3637a9304c6e90a93d900e02369c upstream.

This reverts commit 18fc7c435be3f17ea26a21b2e2312fcb9088e01f.

The reverted commit was based on static analysis and a misunderstanding
of how PTR_ERR() and NULLs are supposed to work.  When a function
returns both pointer errors and NULL then normally the NULL means
"continue operating without a feature because it was deliberately
turned off".  The NULL should not be treated as a failure.  If a driver
cannot work when that feature is disabled then the KConfig should
enforce that the function cannot return NULL.  We should not need to
test for it.

In this code, the patch means that certain tegra_xusb_probe() will
fail if the firmware supports power-domains but CONFIG_PM is disabled.

Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 18fc7c435be3 ("usb: xhci: tegra: Fix error check")
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/8baace8d-fb4b-41a4-ad5f-848ae643a23b@moroto.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-tegra.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -1010,15 +1010,15 @@ static int tegra_xusb_powerdomain_init(s
 	int err;
 
 	tegra->genpd_dev_host = dev_pm_domain_attach_by_name(dev, "xusb_host");
-	if (IS_ERR_OR_NULL(tegra->genpd_dev_host)) {
-		err = PTR_ERR(tegra->genpd_dev_host) ? : -ENODATA;
+	if (IS_ERR(tegra->genpd_dev_host)) {
+		err = PTR_ERR(tegra->genpd_dev_host);
 		dev_err(dev, "failed to get host pm-domain: %d\n", err);
 		return err;
 	}
 
 	tegra->genpd_dev_ss = dev_pm_domain_attach_by_name(dev, "xusb_ss");
-	if (IS_ERR_OR_NULL(tegra->genpd_dev_ss)) {
-		err = PTR_ERR(tegra->genpd_dev_ss) ? : -ENODATA;
+	if (IS_ERR(tegra->genpd_dev_ss)) {
+		err = PTR_ERR(tegra->genpd_dev_ss);
 		dev_err(dev, "failed to get superspeed pm-domain: %d\n", err);
 		return err;
 	}

[PATCH 6.1 173/228] Documentation: security-bugs.rst: update preferences when dealing with the linux-distros group

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4fee0915e649bd0cea56dece6d96f8f4643df33c upstream.

Because the linux-distros group forces reporters to release information
about reported bugs, and they impose arbitrary deadlines in having those
bugs fixed despite not actually being kernel developers, the kernel
security team recommends not interacting with them at all as this just
causes confusion and the early-release of reported security problems.

Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/2023063020-throat-pantyhose-f110@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/admin-guide/security-bugs.rst |   24 +++++++++++-------------
 1 file changed, 11 insertions(+), 13 deletions(-)

--- a/Documentation/admin-guide/security-bugs.rst
+++ b/Documentation/admin-guide/security-bugs.rst
@@ -63,20 +63,18 @@ information submitted to the security li
 of the report are treated confidentially even after the embargo has been
 lifted, in perpetuity.
 
-Coordination
-------------
+Coordination with other groups
+------------------------------
 
-Fixes for sensitive bugs, such as those that might lead to privilege
-escalations, may need to be coordinated with the private
-<linux-distros@vs.openwall.org> mailing list so that distribution vendors
-are well prepared to issue a fixed kernel upon public disclosure of the
-upstream fix. Distros will need some time to test the proposed patch and
-will generally request at least a few days of embargo, and vendor update
-publication prefers to happen Tuesday through Thursday. When appropriate,
-the security team can assist with this coordination, or the reporter can
-include linux-distros from the start. In this case, remember to prefix
-the email Subject line with "[vs]" as described in the linux-distros wiki:
-<http://oss-security.openwall.org/wiki/mailing-lists/distros#how-to-use-the-lists>
+The kernel security team strongly recommends that reporters of potential
+security issues NEVER contact the "linux-distros" mailing list until
+AFTER discussing it with the kernel security team.  Do not Cc: both
+lists at once.  You may contact the linux-distros mailing list after a
+fix has been agreed on and you fully understand the requirements that
+doing so will impose on you and the kernel community.
+
+The different lists have different goals and the linux-distros rules do
+not contribute to actually fixing any potential security problems.
 
 CVE assignment
 --------------

[PATCH 6.1 174/228] Documentation: security-bugs.rst: clarify CVE handling

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3c1897ae4b6bc7cc586eda2feaa2cd68325ec29c upstream.

The kernel security team does NOT assign CVEs, so document that properly
and provide the "if you want one, ask MITRE for it" response that we
give on a weekly basis in the document, so we don't have to constantly
say it to everyone who asks.

Link: https://lore.kernel.org/r/2023063022-retouch-kerosene-7e4a@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/admin-guide/security-bugs.rst |   13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

--- a/Documentation/admin-guide/security-bugs.rst
+++ b/Documentation/admin-guide/security-bugs.rst
@@ -79,13 +79,12 @@ not contribute to actually fixing any po
 CVE assignment
 --------------
 
-The security team does not normally assign CVEs, nor do we require them
-for reports or fixes, as this can needlessly complicate the process and
-may delay the bug handling. If a reporter wishes to have a CVE identifier
-assigned ahead of public disclosure, they will need to contact the private
-linux-distros list, described above. When such a CVE identifier is known
-before a patch is provided, it is desirable to mention it in the commit
-message if the reporter agrees.
+The security team does not assign CVEs, nor do we require them for
+reports or fixes, as this can needlessly complicate the process and may
+delay the bug handling.  If a reporter wishes to have a CVE identifier
+assigned, they should find one by themselves, for example by contacting
+MITRE directly.  However under no circumstances will a patch inclusion
+be delayed to wait for a CVE identifier to arrive.
 
 Non-disclosure agreements
 -------------------------

[PATCH 6.1 175/228] staging: r8712: Fix memory leak in _r8712_init_xmit_priv()

[Greg Kroah-Hartman]

From: Larry Finger <Larry.Finger@lwfinger.net>

commit ac83631230f77dda94154ed0ebfd368fc81c70a3 upstream.

In the above mentioned routine, memory is allocated in several places.
If the first succeeds and a later one fails, the routine will leak memory.
This patch fixes commit 2865d42c78a9 ("staging: r8712u: Add the new driver
to the mainline kernel"). A potential memory leak in
r8712_xmit_resource_alloc() is also addressed.

Fixes: 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel")
Reported-by: syzbot+cf71097ffb6755df8251@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/x/log.txt?x=11ac3fa0a80000
Cc: stable@vger.kernel.org
Cc: Nam Cao <namcaov@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reviewed-by: Nam Cao <namcaov@gmail.com>
Link: https://lore.kernel.org/r/20230714175417.18578-1-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/rtl8712/rtl871x_xmit.c |   43 ++++++++++++++++++++++++++-------
 drivers/staging/rtl8712/xmit_linux.c   |    6 ++++
 2 files changed, 40 insertions(+), 9 deletions(-)

--- a/drivers/staging/rtl8712/rtl871x_xmit.c
+++ b/drivers/staging/rtl8712/rtl871x_xmit.c
@@ -21,6 +21,7 @@
 #include "osdep_intf.h"
 #include "usb_ops.h"
 
+#include <linux/usb.h>
 #include <linux/ieee80211.h>
 
 static const u8 P802_1H_OUI[P80211_OUI_LEN] = {0x00, 0x00, 0xf8};
@@ -55,6 +56,7 @@ int _r8712_init_xmit_priv(struct xmit_pr
 	sint i;
 	struct xmit_buf *pxmitbuf;
 	struct xmit_frame *pxframe;
+	int j;
 
 	memset((unsigned char *)pxmitpriv, 0, sizeof(struct xmit_priv));
 	spin_lock_init(&pxmitpriv->lock);
@@ -117,11 +119,8 @@ int _r8712_init_xmit_priv(struct xmit_pr
 	_init_queue(&pxmitpriv->pending_xmitbuf_queue);
 	pxmitpriv->pallocated_xmitbuf =
 		kmalloc(NR_XMITBUFF * sizeof(struct xmit_buf) + 4, GFP_ATOMIC);
-	if (!pxmitpriv->pallocated_xmitbuf) {
-		kfree(pxmitpriv->pallocated_frame_buf);
-		pxmitpriv->pallocated_frame_buf = NULL;
-		return -ENOMEM;
-	}
+	if (!pxmitpriv->pallocated_xmitbuf)
+		goto clean_up_frame_buf;
 	pxmitpriv->pxmitbuf = pxmitpriv->pallocated_xmitbuf + 4 -
 			      ((addr_t)(pxmitpriv->pallocated_xmitbuf) & 3);
 	pxmitbuf = (struct xmit_buf *)pxmitpriv->pxmitbuf;
@@ -129,13 +128,17 @@ int _r8712_init_xmit_priv(struct xmit_pr
 		INIT_LIST_HEAD(&pxmitbuf->list);
 		pxmitbuf->pallocated_buf =
 			kmalloc(MAX_XMITBUF_SZ + XMITBUF_ALIGN_SZ, GFP_ATOMIC);
-		if (!pxmitbuf->pallocated_buf)
-			return -ENOMEM;
+		if (!pxmitbuf->pallocated_buf) {
+			j = 0;
+			goto clean_up_alloc_buf;
+		}
 		pxmitbuf->pbuf = pxmitbuf->pallocated_buf + XMITBUF_ALIGN_SZ -
 				 ((addr_t) (pxmitbuf->pallocated_buf) &
 				 (XMITBUF_ALIGN_SZ - 1));
-		if (r8712_xmit_resource_alloc(padapter, pxmitbuf))
-			return -ENOMEM;
+		if (r8712_xmit_resource_alloc(padapter, pxmitbuf)) {
+			j = 1;
+			goto clean_up_alloc_buf;
+		}
 		list_add_tail(&pxmitbuf->list,
 				 &(pxmitpriv->free_xmitbuf_queue.queue));
 		pxmitbuf++;
@@ -146,6 +149,28 @@ int _r8712_init_xmit_priv(struct xmit_pr
 	init_hwxmits(pxmitpriv->hwxmits, pxmitpriv->hwxmit_entry);
 	tasklet_setup(&pxmitpriv->xmit_tasklet, r8712_xmit_bh);
 	return 0;
+
+clean_up_alloc_buf:
+	if (j) {
+		/* failure happened in r8712_xmit_resource_alloc()
+		 * delete extra pxmitbuf->pallocated_buf
+		 */
+		kfree(pxmitbuf->pallocated_buf);
+	}
+	for (j = 0; j < i; j++) {
+		int k;
+
+		pxmitbuf--;			/* reset pointer */
+		kfree(pxmitbuf->pallocated_buf);
+		for (k = 0; k < 8; k++)		/* delete xmit urb's */
+			usb_free_urb(pxmitbuf->pxmit_urb[k]);
+	}
+	kfree(pxmitpriv->pallocated_xmitbuf);
+	pxmitpriv->pallocated_xmitbuf = NULL;
+clean_up_frame_buf:
+	kfree(pxmitpriv->pallocated_frame_buf);
+	pxmitpriv->pallocated_frame_buf = NULL;
+	return -ENOMEM;
 }
 
 void _free_xmit_priv(struct xmit_priv *pxmitpriv)
--- a/drivers/staging/rtl8712/xmit_linux.c
+++ b/drivers/staging/rtl8712/xmit_linux.c
@@ -112,6 +112,12 @@ int r8712_xmit_resource_alloc(struct _ad
 	for (i = 0; i < 8; i++) {
 		pxmitbuf->pxmit_urb[i] = usb_alloc_urb(0, GFP_KERNEL);
 		if (!pxmitbuf->pxmit_urb[i]) {
+			int k;
+
+			for (k = i - 1; k >= 0; k--) {
+				/* handle allocation errors part way through loop */
+				usb_free_urb(pxmitbuf->pxmit_urb[k]);
+			}
 			netdev_err(padapter->pnetdev, "pxmitbuf->pxmit_urb[i] == NULL\n");
 			return -ENOMEM;
 		}

[PATCH 6.1 176/228] staging: ks7010: potential buffer overflow in ks_wlan_set_encode_ext()

[Greg Kroah-Hartman]

From: Zhang Shurong <zhang_shurong@foxmail.com>

commit 5f1c7031e044cb2fba82836d55cc235e2ad619dc upstream.

The "exc->key_len" is a u16 that comes from the user.  If it's over
IW_ENCODING_TOKEN_MAX (64) that could lead to memory corruption.

Fixes: b121d84882b9 ("staging: ks7010: simplify calls to memcpy()")
Cc: stable <stable@kernel.org>
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/tencent_5153B668C0283CAA15AA518325346E026A09@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/ks7010/ks_wlan_net.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/staging/ks7010/ks_wlan_net.c
+++ b/drivers/staging/ks7010/ks_wlan_net.c
@@ -1584,8 +1584,10 @@ static int ks_wlan_set_encode_ext(struct
 			commit |= SME_WEP_FLAG;
 		}
 		if (enc->key_len) {
-			memcpy(&key->key_val[0], &enc->key[0], enc->key_len);
-			key->key_len = enc->key_len;
+			int key_len = clamp_val(enc->key_len, 0, IW_ENCODING_TOKEN_MAX);
+
+			memcpy(&key->key_val[0], &enc->key[0], key_len);
+			key->key_len = key_len;
 			commit |= (SME_WEP_VAL1 << index);
 		}
 		break;

[PATCH 6.1 177/228] tty: n_gsm: fix UAF in gsm_cleanup_mux

[Greg Kroah-Hartman]

From: Chaoyuan Peng <hedonistsmith@gmail.com>

commit 9b9c8195f3f0d74a826077fc1c01b9ee74907239 upstream.

In gsm_cleanup_mux() the 'gsm->dlci' pointer was not cleaned properly,
leaving it a dangling pointer after gsm_dlci_release.
This leads to use-after-free where 'gsm->dlci[0]' are freed and accessed
by the subsequent gsm_cleanup_mux().

Such is the case in the following call trace:

 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x1e3/0x2cb lib/dump_stack.c:106
 print_address_description+0x63/0x3b0 mm/kasan/report.c:248
 __kasan_report mm/kasan/report.c:434 [inline]
 kasan_report+0x16b/0x1c0 mm/kasan/report.c:451
 gsm_cleanup_mux+0x76a/0x850 drivers/tty/n_gsm.c:2397
 gsm_config drivers/tty/n_gsm.c:2653 [inline]
 gsmld_ioctl+0xaae/0x15b0 drivers/tty/n_gsm.c:2986
 tty_ioctl+0x8ff/0xc50 drivers/tty/tty_io.c:2816
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:874 [inline]
 __se_sys_ioctl+0xf1/0x160 fs/ioctl.c:860
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x61/0xcb
 </TASK>

Allocated by task 3501:
 kasan_save_stack mm/kasan/common.c:38 [inline]
 kasan_set_track mm/kasan/common.c:46 [inline]
 set_alloc_info mm/kasan/common.c:434 [inline]
 ____kasan_kmalloc+0xba/0xf0 mm/kasan/common.c:513
 kasan_kmalloc include/linux/kasan.h:264 [inline]
 kmem_cache_alloc_trace+0x143/0x290 mm/slub.c:3247
 kmalloc include/linux/slab.h:591 [inline]
 kzalloc include/linux/slab.h:721 [inline]
 gsm_dlci_alloc+0x53/0x3a0 drivers/tty/n_gsm.c:1932
 gsm_activate_mux+0x1c/0x330 drivers/tty/n_gsm.c:2438
 gsm_config drivers/tty/n_gsm.c:2677 [inline]
 gsmld_ioctl+0xd46/0x15b0 drivers/tty/n_gsm.c:2986
 tty_ioctl+0x8ff/0xc50 drivers/tty/tty_io.c:2816
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:874 [inline]
 __se_sys_ioctl+0xf1/0x160 fs/ioctl.c:860
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x61/0xcb

Freed by task 3501:
 kasan_save_stack mm/kasan/common.c:38 [inline]
 kasan_set_track+0x4b/0x80 mm/kasan/common.c:46
 kasan_set_free_info+0x1f/0x40 mm/kasan/generic.c:360
 ____kasan_slab_free+0xd8/0x120 mm/kasan/common.c:366
 kasan_slab_free include/linux/kasan.h:230 [inline]
 slab_free_hook mm/slub.c:1705 [inline]
 slab_free_freelist_hook+0xdd/0x160 mm/slub.c:1731
 slab_free mm/slub.c:3499 [inline]
 kfree+0xf1/0x270 mm/slub.c:4559
 dlci_put drivers/tty/n_gsm.c:1988 [inline]
 gsm_dlci_release drivers/tty/n_gsm.c:2021 [inline]
 gsm_cleanup_mux+0x574/0x850 drivers/tty/n_gsm.c:2415
 gsm_config drivers/tty/n_gsm.c:2653 [inline]
 gsmld_ioctl+0xaae/0x15b0 drivers/tty/n_gsm.c:2986
 tty_ioctl+0x8ff/0xc50 drivers/tty/tty_io.c:2816
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:874 [inline]
 __se_sys_ioctl+0xf1/0x160 fs/ioctl.c:860
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x61/0xcb

Fixes: aa371e96f05d ("tty: n_gsm: fix restart handling via CLD command")
Signed-off-by: Chaoyuan Peng <hedonistsmith@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/n_gsm.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -2508,8 +2508,10 @@ static void gsm_cleanup_mux(struct gsm_m
 		gsm->has_devices = false;
 	}
 	for (i = NUM_DLCI - 1; i >= 0; i--)
-		if (gsm->dlci[i])
+		if (gsm->dlci[i]) {
 			gsm_dlci_release(gsm->dlci[i]);
+			gsm->dlci[i] = NULL;
+		}
 	mutex_unlock(&gsm->mutex);
 	/* Now wipe the queues */
 	tty_ldisc_flush(gsm->tty);

[PATCH 6.1 178/228] Revert "xhci: add quirk for host controllers that dont update endpoint DCS"

[Greg Kroah-Hartman]

From: Oliver Neukum <oneukum@suse.com>

commit 5bef4b3cb95a5b883dfec8b3ffc0d671323d55bb upstream.

This reverts commit 5255660b208aebfdb71d574f3952cf48392f4306.

This quirk breaks at least the following hardware:

0b:00.0 0c03: 1106:3483 (rev 01) (prog-if 30 [XHCI])
        Subsystem: 1106:3483
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 66
        Region 0: Memory at fb400000 (64-bit, non-prefetchable) [size=4K]
        Capabilities: [80] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [90] MSI: Enable+ Count=1/4 Maskable- 64bit+
                Address: 00000000fee007b8  Data: 0000
        Capabilities: [c4] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 89W
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
                LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <2us, L1 <16us
                        ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 5GT/s, Width x1
                        TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Range B, TimeoutDis+ NROPrPrP- LTR-
                         10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
                         EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
                         FRS- TPHComp- ExtTPHComp-
                         AtomicOpsCap: 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 10BitTagReq- OBFF Disabled,
                         AtomicOpsCtl: ReqEn-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
                LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
                         EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
                         Retimer- 2Retimers- CrosslinkRes: unsupported
       Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
                AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
                        MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
                HeaderLog: 00000000 00000000 00000000 00000000
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci

with the quirk enabled it fails early with

[    0.754373] pci 0000:0b:00.0: xHCI HW did not halt within 32000 usec status = 0x1000
[    0.754419] pci 0000:0b:00.0: quirk_usb_early_handoff+0x0/0x7a0 took 31459 usecs
[    2.228048] xhci_hcd 0000:0b:00.0: xHCI Host Controller
[    2.228053] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 7
[    2.260073] xhci_hcd 0000:0b:00.0: Host halt failed, -110
[    2.260079] xhci_hcd 0000:0b:00.0: can't setup: -110
[    2.260551] xhci_hcd 0000:0b:00.0: USB bus 7 deregistered
[    2.260624] xhci_hcd 0000:0b:00.0: init 0000:0b:00.0 fail, -110
[    2.260639] xhci_hcd: probe of 0000:0b:00.0 failed with error -110

The hardware in question is an external PCIe card. It looks to me like the quirk
needs to be narrowed down. But this needs information about the hardware showing
the issue this quirk is to fix. So for now a clean revert.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Fixes: 5255660b208a ("xhci: add quirk for host controllers that don't update endpoint DCS")
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20230713112830.21773-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-pci.c  |    4 +---
 drivers/usb/host/xhci-ring.c |   25 +------------------------
 2 files changed, 2 insertions(+), 27 deletions(-)

--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -293,10 +293,8 @@ static void xhci_pci_quirks(struct devic
 			pdev->device == 0x3432)
 		xhci->quirks |= XHCI_BROKEN_STREAMS;
 
-	if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) {
+	if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483)
 		xhci->quirks |= XHCI_LPM_SUPPORT;
-		xhci->quirks |= XHCI_EP_CTX_BROKEN_DCS;
-	}
 
 	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
 		pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI) {
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -592,11 +592,8 @@ static int xhci_move_dequeue_past_td(str
 	struct xhci_ring *ep_ring;
 	struct xhci_command *cmd;
 	struct xhci_segment *new_seg;
-	struct xhci_segment *halted_seg = NULL;
 	union xhci_trb *new_deq;
 	int new_cycle;
-	union xhci_trb *halted_trb;
-	int index = 0;
 	dma_addr_t addr;
 	u64 hw_dequeue;
 	bool cycle_found = false;
@@ -634,27 +631,7 @@ static int xhci_move_dequeue_past_td(str
 	hw_dequeue = xhci_get_hw_deq(xhci, dev, ep_index, stream_id);
 	new_seg = ep_ring->deq_seg;
 	new_deq = ep_ring->dequeue;
-
-	/*
-	 * Quirk: xHC write-back of the DCS field in the hardware dequeue
-	 * pointer is wrong - use the cycle state of the TRB pointed to by
-	 * the dequeue pointer.
-	 */
-	if (xhci->quirks & XHCI_EP_CTX_BROKEN_DCS &&
-	    !(ep->ep_state & EP_HAS_STREAMS))
-		halted_seg = trb_in_td(xhci, td->start_seg,
-				       td->first_trb, td->last_trb,
-				       hw_dequeue & ~0xf, false);
-	if (halted_seg) {
-		index = ((dma_addr_t)(hw_dequeue & ~0xf) - halted_seg->dma) /
-			 sizeof(*halted_trb);
-		halted_trb = &halted_seg->trbs[index];
-		new_cycle = halted_trb->generic.field[3] & 0x1;
-		xhci_dbg(xhci, "Endpoint DCS = %d TRB index = %d cycle = %d\n",
-			 (u8)(hw_dequeue & 0x1), index, new_cycle);
-	} else {
-		new_cycle = hw_dequeue & 0x1;
-	}
+	new_cycle = hw_dequeue & 0x1;
 
 	/*
 	 * We want to find the pointer, segment and cycle state of the new trb

[PATCH 6.1 179/228] ALSA: hda/realtek: Support ASUS G713PV laptop

[Greg Kroah-Hartman]

From: Pavel Asyutchenko <svenpavel@gmail.com>

commit 8019a4ab3d80c7af391a646cccff953753fc025f upstream.

This laptop has CS35L41 amp connected via I2C.

With this patch speakers begin to work if the
missing _DSD properties are added to ACPI tables.

Signed-off-by: Pavel Asyutchenko <svenpavel@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230726223732.20775-1-svenpavel@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -9580,6 +9580,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1043, 0x1c62, "ASUS GU603", ALC289_FIXUP_ASUS_GA401),
 	SND_PCI_QUIRK(0x1043, 0x1c92, "ASUS ROG Strix G15", ALC285_FIXUP_ASUS_G533Z_PINS),
 	SND_PCI_QUIRK(0x1043, 0x1ccd, "ASUS X555UB", ALC256_FIXUP_ASUS_MIC),
+	SND_PCI_QUIRK(0x1043, 0x1d1f, "ASUS ROG Strix G17 2023 (G713PV)", ALC287_FIXUP_CS35L41_I2C_2),
 	SND_PCI_QUIRK(0x1043, 0x1d42, "ASUS Zephyrus G14 2022", ALC289_FIXUP_ASUS_GA401),
 	SND_PCI_QUIRK(0x1043, 0x1d4e, "ASUS TM420", ALC256_FIXUP_ASUS_HPE),
 	SND_PCI_QUIRK(0x1043, 0x1e02, "ASUS UX3402", ALC245_FIXUP_CS35L41_SPI_2),

[PATCH 6.1 180/228] ALSA: hda/relatek: Enable Mute LED on HP 250 G8

[Greg Kroah-Hartman]

From: Luka Guzenko <l.guzenko@web.de>

commit d510acb610e6aa07a04b688236868b2a5fd60deb upstream.

This HP Notebook used ALC236 codec with COEF 0x07 idx 1 controlling
the mute LED. Enable already existing quirk for this device.

Signed-off-by: Luka Guzenko <l.guzenko@web.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230725111509.623773-1-l.guzenko@web.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -9457,6 +9457,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x103c, 0x880d, "HP EliteBook 830 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x8811, "HP Spectre x360 15-eb1xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1),
 	SND_PCI_QUIRK(0x103c, 0x8812, "HP Spectre x360 15-eb1xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1),
+	SND_PCI_QUIRK(0x103c, 0x881d, "HP 250 G8 Notebook PC", ALC236_FIXUP_HP_MUTE_LED_COEFBIT2),
 	SND_PCI_QUIRK(0x103c, 0x8846, "HP EliteBook 850 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x8847, "HP EliteBook x360 830 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x884b, "HP EliteBook 840 Aero G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED),

[PATCH 6.1 181/228] hwmon: (k10temp) Enable AMD3255 Proc to show negative temperature

[Greg Kroah-Hartman]

From: Baskaran Kannan <Baski.Kannan@amd.com>

commit e146503ac68418859fb063a3a0cd9ec93bc52238 upstream.

Industrial processor i3255 supports temperatures -40 deg celcius
to 105 deg Celcius. The current implementation of k10temp_read_temp
rounds off any negative temperatures to '0'. To fix this,
the following changes have been made.

A flag 'disp_negative' is added to struct k10temp_data to support
AMD i3255 processors. Flag 'disp_negative' is set if 3255 processor
is found during k10temp_probe.  Flag 'disp_negative' is used to
determine whether to round off negative temperatures to '0' in
k10temp_read_temp.

Signed-off-by: Baskaran Kannan <Baski.Kannan@amd.com>
Link: https://lore.kernel.org/r/20230727162159.1056136-1-Baski.Kannan@amd.com
Fixes: aef17ca12719 ("hwmon: (k10temp) Only apply temperature offset if result is positive")
Cc: stable@vger.kernel.org
[groeck: Fixed multi-line comment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hwmon/k10temp.c |   17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -77,6 +77,13 @@ static DEFINE_MUTEX(nb_smu_ind_mutex);
 #define ZEN_CUR_TEMP_RANGE_SEL_MASK		BIT(19)
 #define ZEN_CUR_TEMP_TJ_SEL_MASK		GENMASK(17, 16)
 
+/*
+ * AMD's Industrial processor 3255 supports temperature from -40 deg to 105 deg Celsius.
+ * Use the model name to identify 3255 CPUs and set a flag to display negative temperature.
+ * Do not round off to zero for negative Tctl or Tdie values if the flag is set
+ */
+#define AMD_I3255_STR				"3255"
+
 struct k10temp_data {
 	struct pci_dev *pdev;
 	void (*read_htcreg)(struct pci_dev *pdev, u32 *regval);
@@ -86,6 +93,7 @@ struct k10temp_data {
 	u32 show_temp;
 	bool is_zen;
 	u32 ccd_offset;
+	bool disp_negative;
 };
 
 #define TCTL_BIT	0
@@ -204,12 +212,12 @@ static int k10temp_read_temp(struct devi
 		switch (channel) {
 		case 0:		/* Tctl */
 			*val = get_raw_temp(data);
-			if (*val < 0)
+			if (*val < 0 && !data->disp_negative)
 				*val = 0;
 			break;
 		case 1:		/* Tdie */
 			*val = get_raw_temp(data) - data->temp_offset;
-			if (*val < 0)
+			if (*val < 0 && !data->disp_negative)
 				*val = 0;
 			break;
 		case 2 ... 13:		/* Tccd{1-12} */
@@ -405,6 +413,11 @@ static int k10temp_probe(struct pci_dev
 	data->pdev = pdev;
 	data->show_temp |= BIT(TCTL_BIT);	/* Always show Tctl */
 
+	if (boot_cpu_data.x86 == 0x17 &&
+	    strstr(boot_cpu_data.x86_model_id, AMD_I3255_STR)) {
+		data->disp_negative = true;
+	}
+
 	if (boot_cpu_data.x86 == 0x15 &&
 	    ((boot_cpu_data.x86_model & 0xf0) == 0x60 ||
 	     (boot_cpu_data.x86_model & 0xf0) == 0x70)) {

[PATCH 6.1 182/228] hwmon: (nct7802) Fix for temp6 (PECI1) processed even if PECI1 disabled

[Greg Kroah-Hartman]

From: Gilles Buloz <Gilles.Buloz@kontron.com>

commit 54685abe660a59402344d5045ce08c43c6a5ac42 upstream.

Because of hex value 0x46 used instead of decimal 46, the temp6
(PECI1) temperature is always declared visible and then displayed
even if disabled in the chip

Signed-off-by: Gilles Buloz <gilles.buloz@kontron.com>
Link: https://lore.kernel.org/r/DU0PR10MB62526435ADBC6A85243B90E08002A@DU0PR10MB6252.EURPRD10.PROD.OUTLOOK.COM
Fixes: fcdc5739dce03 ("hwmon: (nct7802) add temperature sensor type attribute")
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hwmon/nct7802.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/hwmon/nct7802.c
+++ b/drivers/hwmon/nct7802.c
@@ -725,7 +725,7 @@ static umode_t nct7802_temp_is_visible(s
 	if (index >= 38 && index < 46 && !(reg & 0x01))		/* PECI 0 */
 		return 0;
 
-	if (index >= 0x46 && (!(reg & 0x02)))			/* PECI 1 */
+	if (index >= 46 && !(reg & 0x02))			/* PECI 1 */
 		return 0;
 
 	return attr->mode;

[PATCH 6.1 183/228] btrfs: account block group tree when calculating global reserve size

[Greg Kroah-Hartman]

From: Filipe Manana <fdmanana@suse.com>

commit 8dbfc14fc736eb701089aff09645c3d4ad3decb1 upstream.

When using the block group tree feature, this tree is a critical tree just
like the extent, csum and free space trees, and just like them it uses the
delayed refs block reserve.

So take into account the block group tree, and its current size, when
calculating the size for the global reserve.

CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/block-rsv.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/fs/btrfs/block-rsv.c
+++ b/fs/btrfs/block-rsv.c
@@ -377,6 +377,11 @@ void btrfs_update_global_block_rsv(struc
 	}
 	read_unlock(&fs_info->global_root_lock);
 
+	if (btrfs_fs_compat_ro(fs_info, BLOCK_GROUP_TREE)) {
+		num_bytes += btrfs_root_used(&fs_info->block_group_root->root_item);
+		min_items++;
+	}
+
 	/*
 	 * But we also want to reserve enough space so we can do the fallback
 	 * global reserve for an unlink, which is an additional 5 items (see the

[PATCH 6.1 184/228] btrfs: check if the transaction was aborted at btrfs_wait_for_commit()

[Greg Kroah-Hartman]

From: Filipe Manana <fdmanana@suse.com>

commit bf7ecbe9875061bf3fce1883e3b26b77f847d1e8 upstream.

At btrfs_wait_for_commit() we wait for a transaction to finish and then
always return 0 (success) without checking if it was aborted, in which
case the transaction didn't happen due to some critical error. Fix this
by checking if the transaction was aborted.

Fixes: 462045928bda ("Btrfs: add START_SYNC, WAIT_SYNC ioctls")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/transaction.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -919,6 +919,7 @@ int btrfs_wait_for_commit(struct btrfs_f
 	}
 
 	wait_for_commit(cur_trans, TRANS_STATE_COMPLETED);
+	ret = cur_trans->aborted;
 	btrfs_put_transaction(cur_trans);
 out:
 	return ret;

[PATCH 6.1 185/228] btrfs: check for commit error at btrfs_attach_transaction_barrier()

[Greg Kroah-Hartman]

From: Filipe Manana <fdmanana@suse.com>

commit b28ff3a7d7e97456fd86b68d24caa32e1cfa7064 upstream.

btrfs_attach_transaction_barrier() is used to get a handle pointing to the
current running transaction if the transaction has not started its commit
yet (its state is < TRANS_STATE_COMMIT_START). If the transaction commit
has started, then we wait for the transaction to commit and finish before
returning - however we completely ignore if the transaction was aborted
due to some error during its commit, we simply return ERR_PT(-ENOENT),
which makes the caller assume everything is fine and no errors happened.

This could make an fsync return success (0) to user space when in fact we
had a transaction abort and the target inode changes were therefore not
persisted.

Fix this by checking for the return value from btrfs_wait_for_commit(),
and if it returned an error, return it back to the caller.

Fixes: d4edf39bd5db ("Btrfs: fix uncompleted transaction")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/transaction.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -814,8 +814,13 @@ btrfs_attach_transaction_barrier(struct
 
 	trans = start_transaction(root, 0, TRANS_ATTACH,
 				  BTRFS_RESERVE_NO_FLUSH, true);
-	if (trans == ERR_PTR(-ENOENT))
-		btrfs_wait_for_commit(root->fs_info, 0);
+	if (trans == ERR_PTR(-ENOENT)) {
+		int ret;
+
+		ret = btrfs_wait_for_commit(root->fs_info, 0);
+		if (ret)
+			return ERR_PTR(ret);
+	}
 
 	return trans;
 }

[PATCH 6.1 186/228] x86/MCE/AMD: Decrement threshold_bank refcount when removing threshold blocks

[Greg Kroah-Hartman]

From: Yazen Ghannam <yazen.ghannam@amd.com>

commit 3ba2e83334bed2b1980b59734e6e84dfaf96026c upstream.

AMD systems from Family 10h to 16h share MCA bank 4 across multiple CPUs.
Therefore, the threshold_bank structure for bank 4, and its threshold_block
structures, will be initialized once at boot time. And the kobject for the
shared bank will be added to each of the CPUs that share it. Furthermore,
the threshold_blocks for the shared bank will be added again to the bank's
kobject. These additions will increase the refcount for the bank's kobject.

For example, a shared bank with two blocks and shared across two CPUs will
be set up like this:

  CPU0 init
    bank create and add; bank refcount = 1; threshold_create_bank()
      block 0 init and add; bank refcount = 2; allocate_threshold_blocks()
      block 1 init and add; bank refcount = 3; allocate_threshold_blocks()
  CPU1 init
    bank add; bank refcount = 3; threshold_create_bank()
      block 0 add; bank refcount = 4; __threshold_add_blocks()
      block 1 add; bank refcount = 5; __threshold_add_blocks()

Currently in threshold_remove_bank(), if the bank is shared then
__threshold_remove_blocks() is called. Here the shared bank's kobject and
the bank's blocks' kobjects are deleted. This is done on the first call
even while the structures are still shared. Subsequent calls from other
CPUs that share the structures will attempt to delete the kobjects.

During kobject_del(), kobject->sd is removed. If the kobject is not part of
a kset with default_groups, then subsequent kobject_del() calls seem safe
even with kobject->sd == NULL.

Originally, the AMD MCA thresholding structures did not use default_groups.
And so the above behavior was not apparent.

However, a recent change implemented default_groups for the thresholding
structures. Therefore, kobject_del() will go down the sysfs_remove_groups()
code path. In this case, the first kobject_del() may succeed and remove
kobject->sd. But subsequent kobject_del() calls will give a WARNing in
kernfs_remove_by_name_ns() since kobject->sd == NULL.

Use kobject_put() on the shared bank's kobject when "removing" blocks. This
decrements the bank's refcount while keeping kobjects enabled until the
bank is no longer shared. At that point, kobject_put() will be called on
the blocks which drives their refcount to 0 and deletes them and also
decrementing the bank's refcount. And finally kobject_put() will be called
on the bank driving its refcount to 0 and deleting it.

The same example above:

  CPU1 shutdown
    bank is shared; bank refcount = 5; threshold_remove_bank()
      block 0 put parent bank; bank refcount = 4; __threshold_remove_blocks()
      block 1 put parent bank; bank refcount = 3; __threshold_remove_blocks()
  CPU0 shutdown
    bank is no longer shared; bank refcount = 3; threshold_remove_bank()
      block 0 put block; bank refcount = 2; deallocate_threshold_blocks()
      block 1 put block; bank refcount = 1; deallocate_threshold_blocks()
    put bank; bank refcount = 0; threshold_remove_bank()

Fixes: 7f99cb5e6039 ("x86/CPU/AMD: Use default_groups in kobj_type")
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/alpine.LRH.2.02.2205301145540.25840@file01.intranet.prod.int.rdu2.redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/cpu/mce/amd.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/x86/kernel/cpu/mce/amd.c
+++ b/arch/x86/kernel/cpu/mce/amd.c
@@ -1265,10 +1265,10 @@ static void __threshold_remove_blocks(st
 	struct threshold_block *pos = NULL;
 	struct threshold_block *tmp = NULL;
 
-	kobject_del(b->kobj);
+	kobject_put(b->kobj);
 
 	list_for_each_entry_safe(pos, tmp, &b->blocks->miscj, miscj)
-		kobject_del(&pos->kobj);
+		kobject_put(b->kobj);
 }
 
 static void threshold_remove_bank(struct threshold_bank *bank)

[PATCH 6.1 187/228] file: always lock position for FMODE_ATOMIC_POS

[Greg Kroah-Hartman]

From: Christian Brauner <brauner@kernel.org>

commit 20ea1e7d13c1b544fe67c4a8dc3943bb1ab33e6f upstream.

The pidfd_getfd() system call allows a caller with ptrace_may_access()
abilities on another process to steal a file descriptor from this
process. This system call is used by debuggers, container runtimes,
system call supervisors, networking proxies etc. So while it is a
special interest system call it is used in common tools.

That ability ends up breaking our long-time optimization in fdget_pos(),
which "knew" that if we had exclusive access to the file descriptor
nobody else could access it, and we didn't need the lock for the file
position.

That check for file_count(file) was always fairly subtle - it depended
on __fdget() not incrementing the file count for single-threaded
processes and thus included that as part of the rule - but it did mean
that we didn't need to take the lock in all those traditional unix
process contexts.

So it's sad to see this go, and I'd love to have some way to re-instate
the optimization. At the same time, the lock obviously isn't ever
contended in the case we optimized, so all we were optimizing away is
the atomics and the cacheline dirtying. Let's see if anybody even
notices that the optimization is gone.

Link: https://lore.kernel.org/linux-fsdevel/20230724-vfs-fdget_pos-v1-1-a4abfd7103f3@kernel.org/
Fixes: 8649c322f75c ("pid: Implement pidfd_getfd syscall")
Cc: stable@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/file.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/fs/file.c
+++ b/fs/file.c
@@ -1042,10 +1042,8 @@ unsigned long __fdget_pos(unsigned int f
 	struct file *file = (struct file *)(v & ~3);
 
 	if (file && (file->f_mode & FMODE_ATOMIC_POS)) {
-		if (file_count(file) > 1) {
-			v |= FDPUT_POS_UNLOCK;
-			mutex_lock(&file->f_pos_lock);
-		}
+		v |= FDPUT_POS_UNLOCK;
+		mutex_lock(&file->f_pos_lock);
 	}
 	return v;
 }

[PATCH 6.1 188/228] nfsd: Remove incorrect check in nfsd4_validate_stateid

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

commit f75546f58a70da5cfdcec5a45ffc377885ccbee8 upstream.

If the client is calling TEST_STATEID, then it is because some event
occurred that requires it to check all the stateids for validity and
call FREE_STATEID on the ones that have been revoked. In this case,
either the stateid exists in the list of stateids associated with that
nfs4_client, in which case it should be tested, or it does not. There
are no additional conditions to be considered.

Reported-by: "Frank Ch. Eigler" <fche@redhat.com>
Fixes: 7df302f75ee2 ("NFSD: TEST_STATEID should not return NFS4ERR_STALE_STATEID")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfsd/nfs4state.c |    2 --
 1 file changed, 2 deletions(-)

--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -6269,8 +6269,6 @@ static __be32 nfsd4_validate_stateid(str
 	if (ZERO_STATEID(stateid) || ONE_STATEID(stateid) ||
 		CLOSE_STATEID(stateid))
 		return status;
-	if (!same_clid(&stateid->si_opaque.so_clid, &cl->cl_clientid))
-		return status;
 	spin_lock(&cl->cl_lock);
 	s = find_stateid_locked(cl, stateid);
 	if (!s)

[PATCH 6.1 189/228] ACPI/IORT: Remove erroneous id_count check in iort_node_get_rmr_info()

[Greg Kroah-Hartman]

From: Guanghui Feng <guanghuifeng@linux.alibaba.com>

commit 003e6b56d780095a9adc23efc9cb4b4b4717169b upstream.

According to the ARM IORT specifications DEN 0049 issue E,
the "Number of IDs" field in the ID mapping format reports
the number of IDs in the mapping range minus one.

In iort_node_get_rmr_info(), we erroneously skip ID mappings
whose "Number of IDs" equal to 0, resulting in valid mapping
nodes with a single ID to map being skipped, which is wrong.

Fix iort_node_get_rmr_info() by removing the bogus id_count
check.

Fixes: 491cf4a6735a ("ACPI/IORT: Add support to retrieve IORT RMR reserved regions")
Signed-off-by: Guanghui Feng <guanghuifeng@linux.alibaba.com>
Cc: <stable@vger.kernel.org> # 6.0.x
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/1689593625-45213-1-git-send-email-guanghuifeng@linux.alibaba.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/arm64/iort.c |    3 ---
 1 file changed, 3 deletions(-)

--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -998,9 +998,6 @@ static void iort_node_get_rmr_info(struc
 	for (i = 0; i < node->mapping_count; i++, map++) {
 		struct acpi_iort_node *parent;
 
-		if (!map->id_count)
-			continue;
-
 		parent = ACPI_ADD_PTR(struct acpi_iort_node, iort_table,
 				      map->output_reference);
 		if (parent != iommu)

[PATCH 6.1 190/228] tpm_tis: Explicitly check for error code

[Greg Kroah-Hartman]

From: Alexander Steffen <Alexander.Steffen@infineon.com>

commit 513253f8c293c0c8bd46d09d337fc892bf8f9f48 upstream.

recv_data either returns the number of received bytes, or a negative value
representing an error code. Adding the return value directly to the total
number of received bytes therefore looks a little weird, since it might add
a negative error code to a sum of bytes.

The following check for size < expected usually makes the function return
ETIME in that case, so it does not cause too many problems in practice. But
to make the code look cleaner and because the caller might still be
interested in the original error code, explicitly check for the presence of
an error code and pass that through.

Cc: stable@vger.kernel.org
Fixes: cb5354253af2 ("[PATCH] tpm: spacing cleanups 2")
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/char/tpm/tpm_tis_core.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -356,8 +356,13 @@ static int tpm_tis_recv(struct tpm_chip
 		goto out;
 	}
 
-	size += recv_data(chip, &buf[TPM_HEADER_SIZE],
-			  expected - TPM_HEADER_SIZE);
+	rc = recv_data(chip, &buf[TPM_HEADER_SIZE],
+		       expected - TPM_HEADER_SIZE);
+	if (rc < 0) {
+		size = rc;
+		goto out;
+	}
+	size += rc;
 	if (size < expected) {
 		dev_err(&chip->dev, "Unable to read remainder of result\n");
 		size = -ETIME;

[PATCH 6.1 191/228] irq-bcm6345-l1: Do not assume a fixed block to cpu mapping

[Greg Kroah-Hartman]

From: Jonas Gorski <jonas.gorski@gmail.com>

[ Upstream commit 55ad24857341c36616ecc1d9580af5626c226cf1 ]

The irq to block mapping is fixed, and interrupts from the first block
will always be routed to the first parent IRQ. But the parent interrupts
themselves can be routed to any available CPU.

This is used by the bootloader to map the first parent interrupt to the
boot CPU, regardless wether the boot CPU is the first one or the second
one.

When booting from the second CPU, the assumption that the first block's
IRQ is mapped to the first CPU breaks, and the system hangs because
interrupts do not get routed correctly.

Fix this by passing the appropriate bcm6434_l1_cpu to the interrupt
handler instead of the chip itself, so the handler always has the right
block.

Fixes: c7c42ec2baa1 ("irqchips/bmips: Add bcm6345-l1 interrupt controller")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230629072620.62527-1-jonas.gorski@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-bcm6345-l1.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

diff --git a/drivers/irqchip/irq-bcm6345-l1.c b/drivers/irqchip/irq-bcm6345-l1.c
index 6899e37810a88..b14c74f7b9b98 100644
--- a/drivers/irqchip/irq-bcm6345-l1.c
+++ b/drivers/irqchip/irq-bcm6345-l1.c
@@ -82,6 +82,7 @@ struct bcm6345_l1_chip {
 };
 
 struct bcm6345_l1_cpu {
+	struct bcm6345_l1_chip	*intc;
 	void __iomem		*map_base;
 	unsigned int		parent_irq;
 	u32			enable_cache[];
@@ -115,17 +116,11 @@ static inline unsigned int cpu_for_irq(struct bcm6345_l1_chip *intc,
 
 static void bcm6345_l1_irq_handle(struct irq_desc *desc)
 {
-	struct bcm6345_l1_chip *intc = irq_desc_get_handler_data(desc);
-	struct bcm6345_l1_cpu *cpu;
+	struct bcm6345_l1_cpu *cpu = irq_desc_get_handler_data(desc);
+	struct bcm6345_l1_chip *intc = cpu->intc;
 	struct irq_chip *chip = irq_desc_get_chip(desc);
 	unsigned int idx;
 
-#ifdef CONFIG_SMP
-	cpu = intc->cpus[cpu_logical_map(smp_processor_id())];
-#else
-	cpu = intc->cpus[0];
-#endif
-
 	chained_irq_enter(chip, desc);
 
 	for (idx = 0; idx < intc->n_words; idx++) {
@@ -253,6 +248,7 @@ static int __init bcm6345_l1_init_one(struct device_node *dn,
 	if (!cpu)
 		return -ENOMEM;
 
+	cpu->intc = intc;
 	cpu->map_base = ioremap(res.start, sz);
 	if (!cpu->map_base)
 		return -ENOMEM;
@@ -268,7 +264,7 @@ static int __init bcm6345_l1_init_one(struct device_node *dn,
 		return -EINVAL;
 	}
 	irq_set_chained_handler_and_data(cpu->parent_irq,
-						bcm6345_l1_irq_handle, intc);
+						bcm6345_l1_irq_handle, cpu);
 
 	return 0;
 }
-- 
2.40.1

[PATCH 6.1 192/228] irqchip/gic-v4.1: Properly lock VPEs when doing a directLPI invalidation

[Greg Kroah-Hartman]

From: Marc Zyngier <maz@kernel.org>

[ Upstream commit 926846a703cbf5d0635cc06e67d34b228746554b ]

We normally rely on the irq_to_cpuid_[un]lock() primitives to make
sure nothing will change col->idx while performing a LPI invalidation.

However, these primitives do not cover VPE doorbells, and we have
some open-coded locking for that. Unfortunately, this locking is
pretty bogus.

Instead, extend the above primitives to cover VPE doorbells and
convert the whole thing to it.

Fixes: f3a059219bc7 ("irqchip/gic-v4.1: Ensure mutual exclusion between vPE affinity change and RD access")
Reported-by: Kunkun Jiang <jiangkunkun@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Cc: wanghaibin.wang@huawei.com
Tested-by: Kunkun Jiang <jiangkunkun@huawei.com>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20230617073242.3199746-1-maz@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-gic-v3-its.c | 75 ++++++++++++++++++++------------
 1 file changed, 46 insertions(+), 29 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 973ede0197e36..8956881503d9a 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -271,13 +271,23 @@ static void vpe_to_cpuid_unlock(struct its_vpe *vpe, unsigned long flags)
 	raw_spin_unlock_irqrestore(&vpe->vpe_lock, flags);
 }
 
+static struct irq_chip its_vpe_irq_chip;
+
 static int irq_to_cpuid_lock(struct irq_data *d, unsigned long *flags)
 {
-	struct its_vlpi_map *map = get_vlpi_map(d);
+	struct its_vpe *vpe = NULL;
 	int cpu;
 
-	if (map) {
-		cpu = vpe_to_cpuid_lock(map->vpe, flags);
+	if (d->chip == &its_vpe_irq_chip) {
+		vpe = irq_data_get_irq_chip_data(d);
+	} else {
+		struct its_vlpi_map *map = get_vlpi_map(d);
+		if (map)
+			vpe = map->vpe;
+	}
+
+	if (vpe) {
+		cpu = vpe_to_cpuid_lock(vpe, flags);
 	} else {
 		/* Physical LPIs are already locked via the irq_desc lock */
 		struct its_device *its_dev = irq_data_get_irq_chip_data(d);
@@ -291,10 +301,18 @@ static int irq_to_cpuid_lock(struct irq_data *d, unsigned long *flags)
 
 static void irq_to_cpuid_unlock(struct irq_data *d, unsigned long flags)
 {
-	struct its_vlpi_map *map = get_vlpi_map(d);
+	struct its_vpe *vpe = NULL;
+
+	if (d->chip == &its_vpe_irq_chip) {
+		vpe = irq_data_get_irq_chip_data(d);
+	} else {
+		struct its_vlpi_map *map = get_vlpi_map(d);
+		if (map)
+			vpe = map->vpe;
+	}
 
-	if (map)
-		vpe_to_cpuid_unlock(map->vpe, flags);
+	if (vpe)
+		vpe_to_cpuid_unlock(vpe, flags);
 }
 
 static struct its_collection *valid_col(struct its_collection *col)
@@ -1431,14 +1449,29 @@ static void wait_for_syncr(void __iomem *rdbase)
 		cpu_relax();
 }
 
-static void direct_lpi_inv(struct irq_data *d)
+static void __direct_lpi_inv(struct irq_data *d, u64 val)
 {
-	struct its_vlpi_map *map = get_vlpi_map(d);
 	void __iomem *rdbase;
 	unsigned long flags;
-	u64 val;
 	int cpu;
 
+	/* Target the redistributor this LPI is currently routed to */
+	cpu = irq_to_cpuid_lock(d, &flags);
+	raw_spin_lock(&gic_data_rdist_cpu(cpu)->rd_lock);
+
+	rdbase = per_cpu_ptr(gic_rdists->rdist, cpu)->rd_base;
+	gic_write_lpir(val, rdbase + GICR_INVLPIR);
+	wait_for_syncr(rdbase);
+
+	raw_spin_unlock(&gic_data_rdist_cpu(cpu)->rd_lock);
+	irq_to_cpuid_unlock(d, flags);
+}
+
+static void direct_lpi_inv(struct irq_data *d)
+{
+	struct its_vlpi_map *map = get_vlpi_map(d);
+	u64 val;
+
 	if (map) {
 		struct its_device *its_dev = irq_data_get_irq_chip_data(d);
 
@@ -1451,15 +1484,7 @@ static void direct_lpi_inv(struct irq_data *d)
 		val = d->hwirq;
 	}
 
-	/* Target the redistributor this LPI is currently routed to */
-	cpu = irq_to_cpuid_lock(d, &flags);
-	raw_spin_lock(&gic_data_rdist_cpu(cpu)->rd_lock);
-	rdbase = per_cpu_ptr(gic_rdists->rdist, cpu)->rd_base;
-	gic_write_lpir(val, rdbase + GICR_INVLPIR);
-
-	wait_for_syncr(rdbase);
-	raw_spin_unlock(&gic_data_rdist_cpu(cpu)->rd_lock);
-	irq_to_cpuid_unlock(d, flags);
+	__direct_lpi_inv(d, val);
 }
 
 static void lpi_update_config(struct irq_data *d, u8 clr, u8 set)
@@ -3941,18 +3966,10 @@ static void its_vpe_send_inv(struct irq_data *d)
 {
 	struct its_vpe *vpe = irq_data_get_irq_chip_data(d);
 
-	if (gic_rdists->has_direct_lpi) {
-		void __iomem *rdbase;
-
-		/* Target the redistributor this VPE is currently known on */
-		raw_spin_lock(&gic_data_rdist_cpu(vpe->col_idx)->rd_lock);
-		rdbase = per_cpu_ptr(gic_rdists->rdist, vpe->col_idx)->rd_base;
-		gic_write_lpir(d->parent_data->hwirq, rdbase + GICR_INVLPIR);
-		wait_for_syncr(rdbase);
-		raw_spin_unlock(&gic_data_rdist_cpu(vpe->col_idx)->rd_lock);
-	} else {
+	if (gic_rdists->has_direct_lpi)
+		__direct_lpi_inv(d, d->parent_data->hwirq);
+	else
 		its_vpe_send_cmd(vpe, its_send_inv);
-	}
 }
 
 static void its_vpe_mask_irq(struct irq_data *d)
-- 
2.40.1

[PATCH 6.1 193/228] locking/rtmutex: Fix task->pi_waiters integrity

[Greg Kroah-Hartman]

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit f7853c34241807bb97673a5e97719123be39a09e ]

Henry reported that rt_mutex_adjust_prio_check() has an ordering
problem and puts the lie to the comment in [7]. Sharing the sort key
between lock->waiters and owner->pi_waiters *does* create problems,
since unlike what the comment claims, holding [L] is insufficient.

Notably, consider:

	A
      /   \
     M1   M2
     |     |
     B     C

That is, task A owns both M1 and M2, B and C block on them. In this
case a concurrent chain walk (B & C) will modify their resp. sort keys
in [7] while holding M1->wait_lock and M2->wait_lock. So holding [L]
is meaningless, they're different Ls.

This then gives rise to a race condition between [7] and [11], where
the requeue of pi_waiters will observe an inconsistent tree order.

	B				C

  (holds M1->wait_lock,		(holds M2->wait_lock,
   holds B->pi_lock)		 holds A->pi_lock)

  [7]
  waiter_update_prio();
  ...
  [8]
  raw_spin_unlock(B->pi_lock);
  ...
  [10]
  raw_spin_lock(A->pi_lock);

				[11]
				rt_mutex_enqueue_pi();
				// observes inconsistent A->pi_waiters
				// tree order

Fixing this means either extending the range of the owner lock from
[10-13] to [6-13], with the immediate problem that this means [6-8]
hold both blocked and owner locks, or duplicating the sort key.

Since the locking in chain walk is horrible enough without having to
consider pi_lock nesting rules, duplicate the sort key instead.

By giving each tree their own sort key, the above race becomes
harmless, if C sees B at the old location, then B will correct things
(if they need correcting) when it walks up the chain and reaches A.

Fixes: fb00aca47440 ("rtmutex: Turn the plist into an rb-tree")
Reported-by: Henry Wu <triangletrap12@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Henry Wu <triangletrap12@gmail.com>
Link: https://lkml.kernel.org/r/20230707161052.GF2883469%40hirez.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/locking/rtmutex.c        | 170 +++++++++++++++++++++-----------
 kernel/locking/rtmutex_api.c    |   2 +-
 kernel/locking/rtmutex_common.h |  47 ++++++---
 kernel/locking/ww_mutex.h       |  12 +--
 4 files changed, 155 insertions(+), 76 deletions(-)

diff --git a/kernel/locking/rtmutex.c b/kernel/locking/rtmutex.c
index 728f434de2bbf..21db0df0eb000 100644
--- a/kernel/locking/rtmutex.c
+++ b/kernel/locking/rtmutex.c
@@ -333,21 +333,43 @@ static __always_inline int __waiter_prio(struct task_struct *task)
 	return prio;
 }
 
+/*
+ * Update the waiter->tree copy of the sort keys.
+ */
 static __always_inline void
 waiter_update_prio(struct rt_mutex_waiter *waiter, struct task_struct *task)
 {
-	waiter->prio = __waiter_prio(task);
-	waiter->deadline = task->dl.deadline;
+	lockdep_assert_held(&waiter->lock->wait_lock);
+	lockdep_assert(RB_EMPTY_NODE(&waiter->tree.entry));
+
+	waiter->tree.prio = __waiter_prio(task);
+	waiter->tree.deadline = task->dl.deadline;
+}
+
+/*
+ * Update the waiter->pi_tree copy of the sort keys (from the tree copy).
+ */
+static __always_inline void
+waiter_clone_prio(struct rt_mutex_waiter *waiter, struct task_struct *task)
+{
+	lockdep_assert_held(&waiter->lock->wait_lock);
+	lockdep_assert_held(&task->pi_lock);
+	lockdep_assert(RB_EMPTY_NODE(&waiter->pi_tree.entry));
+
+	waiter->pi_tree.prio = waiter->tree.prio;
+	waiter->pi_tree.deadline = waiter->tree.deadline;
 }
 
 /*
- * Only use with rt_mutex_waiter_{less,equal}()
+ * Only use with rt_waiter_node_{less,equal}()
  */
+#define task_to_waiter_node(p)	\
+	&(struct rt_waiter_node){ .prio = __waiter_prio(p), .deadline = (p)->dl.deadline }
 #define task_to_waiter(p)	\
-	&(struct rt_mutex_waiter){ .prio = __waiter_prio(p), .deadline = (p)->dl.deadline }
+	&(struct rt_mutex_waiter){ .tree = *task_to_waiter_node(p) }
 
-static __always_inline int rt_mutex_waiter_less(struct rt_mutex_waiter *left,
-						struct rt_mutex_waiter *right)
+static __always_inline int rt_waiter_node_less(struct rt_waiter_node *left,
+					       struct rt_waiter_node *right)
 {
 	if (left->prio < right->prio)
 		return 1;
@@ -364,8 +386,8 @@ static __always_inline int rt_mutex_waiter_less(struct rt_mutex_waiter *left,
 	return 0;
 }
 
-static __always_inline int rt_mutex_waiter_equal(struct rt_mutex_waiter *left,
-						 struct rt_mutex_waiter *right)
+static __always_inline int rt_waiter_node_equal(struct rt_waiter_node *left,
+						 struct rt_waiter_node *right)
 {
 	if (left->prio != right->prio)
 		return 0;
@@ -385,7 +407,7 @@ static __always_inline int rt_mutex_waiter_equal(struct rt_mutex_waiter *left,
 static inline bool rt_mutex_steal(struct rt_mutex_waiter *waiter,
 				  struct rt_mutex_waiter *top_waiter)
 {
-	if (rt_mutex_waiter_less(waiter, top_waiter))
+	if (rt_waiter_node_less(&waiter->tree, &top_waiter->tree))
 		return true;
 
 #ifdef RT_MUTEX_BUILD_SPINLOCKS
@@ -393,30 +415,30 @@ static inline bool rt_mutex_steal(struct rt_mutex_waiter *waiter,
 	 * Note that RT tasks are excluded from same priority (lateral)
 	 * steals to prevent the introduction of an unbounded latency.
 	 */
-	if (rt_prio(waiter->prio) || dl_prio(waiter->prio))
+	if (rt_prio(waiter->tree.prio) || dl_prio(waiter->tree.prio))
 		return false;
 
-	return rt_mutex_waiter_equal(waiter, top_waiter);
+	return rt_waiter_node_equal(&waiter->tree, &top_waiter->tree);
 #else
 	return false;
 #endif
 }
 
 #define __node_2_waiter(node) \
-	rb_entry((node), struct rt_mutex_waiter, tree_entry)
+	rb_entry((node), struct rt_mutex_waiter, tree.entry)
 
 static __always_inline bool __waiter_less(struct rb_node *a, const struct rb_node *b)
 {
 	struct rt_mutex_waiter *aw = __node_2_waiter(a);
 	struct rt_mutex_waiter *bw = __node_2_waiter(b);
 
-	if (rt_mutex_waiter_less(aw, bw))
+	if (rt_waiter_node_less(&aw->tree, &bw->tree))
 		return 1;
 
 	if (!build_ww_mutex())
 		return 0;
 
-	if (rt_mutex_waiter_less(bw, aw))
+	if (rt_waiter_node_less(&bw->tree, &aw->tree))
 		return 0;
 
 	/* NOTE: relies on waiter->ww_ctx being set before insertion */
@@ -434,48 +456,58 @@ static __always_inline bool __waiter_less(struct rb_node *a, const struct rb_nod
 static __always_inline void
 rt_mutex_enqueue(struct rt_mutex_base *lock, struct rt_mutex_waiter *waiter)
 {
-	rb_add_cached(&waiter->tree_entry, &lock->waiters, __waiter_less);
+	lockdep_assert_held(&lock->wait_lock);
+
+	rb_add_cached(&waiter->tree.entry, &lock->waiters, __waiter_less);
 }
 
 static __always_inline void
 rt_mutex_dequeue(struct rt_mutex_base *lock, struct rt_mutex_waiter *waiter)
 {
-	if (RB_EMPTY_NODE(&waiter->tree_entry))
+	lockdep_assert_held(&lock->wait_lock);
+
+	if (RB_EMPTY_NODE(&waiter->tree.entry))
 		return;
 
-	rb_erase_cached(&waiter->tree_entry, &lock->waiters);
-	RB_CLEAR_NODE(&waiter->tree_entry);
+	rb_erase_cached(&waiter->tree.entry, &lock->waiters);
+	RB_CLEAR_NODE(&waiter->tree.entry);
 }
 
-#define __node_2_pi_waiter(node) \
-	rb_entry((node), struct rt_mutex_waiter, pi_tree_entry)
+#define __node_2_rt_node(node) \
+	rb_entry((node), struct rt_waiter_node, entry)
 
-static __always_inline bool
-__pi_waiter_less(struct rb_node *a, const struct rb_node *b)
+static __always_inline bool __pi_waiter_less(struct rb_node *a, const struct rb_node *b)
 {
-	return rt_mutex_waiter_less(__node_2_pi_waiter(a), __node_2_pi_waiter(b));
+	return rt_waiter_node_less(__node_2_rt_node(a), __node_2_rt_node(b));
 }
 
 static __always_inline void
 rt_mutex_enqueue_pi(struct task_struct *task, struct rt_mutex_waiter *waiter)
 {
-	rb_add_cached(&waiter->pi_tree_entry, &task->pi_waiters, __pi_waiter_less);
+	lockdep_assert_held(&task->pi_lock);
+
+	rb_add_cached(&waiter->pi_tree.entry, &task->pi_waiters, __pi_waiter_less);
 }
 
 static __always_inline void
 rt_mutex_dequeue_pi(struct task_struct *task, struct rt_mutex_waiter *waiter)
 {
-	if (RB_EMPTY_NODE(&waiter->pi_tree_entry))
+	lockdep_assert_held(&task->pi_lock);
+
+	if (RB_EMPTY_NODE(&waiter->pi_tree.entry))
 		return;
 
-	rb_erase_cached(&waiter->pi_tree_entry, &task->pi_waiters);
-	RB_CLEAR_NODE(&waiter->pi_tree_entry);
+	rb_erase_cached(&waiter->pi_tree.entry, &task->pi_waiters);
+	RB_CLEAR_NODE(&waiter->pi_tree.entry);
 }
 
-static __always_inline void rt_mutex_adjust_prio(struct task_struct *p)
+static __always_inline void rt_mutex_adjust_prio(struct rt_mutex_base *lock,
+						 struct task_struct *p)
 {
 	struct task_struct *pi_task = NULL;
 
+	lockdep_assert_held(&lock->wait_lock);
+	lockdep_assert(rt_mutex_owner(lock) == p);
 	lockdep_assert_held(&p->pi_lock);
 
 	if (task_has_pi_waiters(p))
@@ -571,9 +603,14 @@ static __always_inline struct rt_mutex_base *task_blocked_on_lock(struct task_st
  * Chain walk basics and protection scope
  *
  * [R] refcount on task
- * [P] task->pi_lock held
+ * [Pn] task->pi_lock held
  * [L] rtmutex->wait_lock held
  *
+ * Normal locking order:
+ *
+ *   rtmutex->wait_lock
+ *     task->pi_lock
+ *
  * Step	Description				Protected by
  *	function arguments:
  *	@task					[R]
@@ -588,27 +625,32 @@ static __always_inline struct rt_mutex_base *task_blocked_on_lock(struct task_st
  *	again:
  *	  loop_sanity_check();
  *	retry:
- * [1]	  lock(task->pi_lock);			[R] acquire [P]
- * [2]	  waiter = task->pi_blocked_on;		[P]
- * [3]	  check_exit_conditions_1();		[P]
- * [4]	  lock = waiter->lock;			[P]
- * [5]	  if (!try_lock(lock->wait_lock)) {	[P] try to acquire [L]
- *	    unlock(task->pi_lock);		release [P]
+ * [1]	  lock(task->pi_lock);			[R] acquire [P1]
+ * [2]	  waiter = task->pi_blocked_on;		[P1]
+ * [3]	  check_exit_conditions_1();		[P1]
+ * [4]	  lock = waiter->lock;			[P1]
+ * [5]	  if (!try_lock(lock->wait_lock)) {	[P1] try to acquire [L]
+ *	    unlock(task->pi_lock);		release [P1]
  *	    goto retry;
  *	  }
- * [6]	  check_exit_conditions_2();		[P] + [L]
- * [7]	  requeue_lock_waiter(lock, waiter);	[P] + [L]
- * [8]	  unlock(task->pi_lock);		release [P]
+ * [6]	  check_exit_conditions_2();		[P1] + [L]
+ * [7]	  requeue_lock_waiter(lock, waiter);	[P1] + [L]
+ * [8]	  unlock(task->pi_lock);		release [P1]
  *	  put_task_struct(task);		release [R]
  * [9]	  check_exit_conditions_3();		[L]
  * [10]	  task = owner(lock);			[L]
  *	  get_task_struct(task);		[L] acquire [R]
- *	  lock(task->pi_lock);			[L] acquire [P]
- * [11]	  requeue_pi_waiter(tsk, waiters(lock));[P] + [L]
- * [12]	  check_exit_conditions_4();		[P] + [L]
- * [13]	  unlock(task->pi_lock);		release [P]
+ *	  lock(task->pi_lock);			[L] acquire [P2]
+ * [11]	  requeue_pi_waiter(tsk, waiters(lock));[P2] + [L]
+ * [12]	  check_exit_conditions_4();		[P2] + [L]
+ * [13]	  unlock(task->pi_lock);		release [P2]
  *	  unlock(lock->wait_lock);		release [L]
  *	  goto again;
+ *
+ * Where P1 is the blocking task and P2 is the lock owner; going up one step
+ * the owner becomes the next blocked task etc..
+ *
+*
  */
 static int __sched rt_mutex_adjust_prio_chain(struct task_struct *task,
 					      enum rtmutex_chainwalk chwalk,
@@ -756,7 +798,7 @@ static int __sched rt_mutex_adjust_prio_chain(struct task_struct *task,
 	 * enabled we continue, but stop the requeueing in the chain
 	 * walk.
 	 */
-	if (rt_mutex_waiter_equal(waiter, task_to_waiter(task))) {
+	if (rt_waiter_node_equal(&waiter->tree, task_to_waiter_node(task))) {
 		if (!detect_deadlock)
 			goto out_unlock_pi;
 		else
@@ -764,13 +806,18 @@ static int __sched rt_mutex_adjust_prio_chain(struct task_struct *task,
 	}
 
 	/*
-	 * [4] Get the next lock
+	 * [4] Get the next lock; per holding task->pi_lock we can't unblock
+	 * and guarantee @lock's existence.
 	 */
 	lock = waiter->lock;
 	/*
 	 * [5] We need to trylock here as we are holding task->pi_lock,
 	 * which is the reverse lock order versus the other rtmutex
 	 * operations.
+	 *
+	 * Per the above, holding task->pi_lock guarantees lock exists, so
+	 * inverting this lock order is infeasible from a life-time
+	 * perspective.
 	 */
 	if (!raw_spin_trylock(&lock->wait_lock)) {
 		raw_spin_unlock_irq(&task->pi_lock);
@@ -874,17 +921,18 @@ static int __sched rt_mutex_adjust_prio_chain(struct task_struct *task,
 	 * or
 	 *
 	 *   DL CBS enforcement advancing the effective deadline.
-	 *
-	 * Even though pi_waiters also uses these fields, and that tree is only
-	 * updated in [11], we can do this here, since we hold [L], which
-	 * serializes all pi_waiters access and rb_erase() does not care about
-	 * the values of the node being removed.
 	 */
 	waiter_update_prio(waiter, task);
 
 	rt_mutex_enqueue(lock, waiter);
 
-	/* [8] Release the task */
+	/*
+	 * [8] Release the (blocking) task in preparation for
+	 * taking the owner task in [10].
+	 *
+	 * Since we hold lock->waiter_lock, task cannot unblock, even if we
+	 * release task->pi_lock.
+	 */
 	raw_spin_unlock(&task->pi_lock);
 	put_task_struct(task);
 
@@ -908,7 +956,12 @@ static int __sched rt_mutex_adjust_prio_chain(struct task_struct *task,
 		return 0;
 	}
 
-	/* [10] Grab the next task, i.e. the owner of @lock */
+	/*
+	 * [10] Grab the next task, i.e. the owner of @lock
+	 *
+	 * Per holding lock->wait_lock and checking for !owner above, there
+	 * must be an owner and it cannot go away.
+	 */
 	task = get_task_struct(rt_mutex_owner(lock));
 	raw_spin_lock(&task->pi_lock);
 
@@ -921,8 +974,9 @@ static int __sched rt_mutex_adjust_prio_chain(struct task_struct *task,
 		 * and adjust the priority of the owner.
 		 */
 		rt_mutex_dequeue_pi(task, prerequeue_top_waiter);
+		waiter_clone_prio(waiter, task);
 		rt_mutex_enqueue_pi(task, waiter);
-		rt_mutex_adjust_prio(task);
+		rt_mutex_adjust_prio(lock, task);
 
 	} else if (prerequeue_top_waiter == waiter) {
 		/*
@@ -937,8 +991,9 @@ static int __sched rt_mutex_adjust_prio_chain(struct task_struct *task,
 		 */
 		rt_mutex_dequeue_pi(task, waiter);
 		waiter = rt_mutex_top_waiter(lock);
+		waiter_clone_prio(waiter, task);
 		rt_mutex_enqueue_pi(task, waiter);
-		rt_mutex_adjust_prio(task);
+		rt_mutex_adjust_prio(lock, task);
 	} else {
 		/*
 		 * Nothing changed. No need to do any priority
@@ -1154,6 +1209,7 @@ static int __sched task_blocks_on_rt_mutex(struct rt_mutex_base *lock,
 	waiter->task = task;
 	waiter->lock = lock;
 	waiter_update_prio(waiter, task);
+	waiter_clone_prio(waiter, task);
 
 	/* Get the top priority waiter on the lock */
 	if (rt_mutex_has_waiters(lock))
@@ -1187,7 +1243,7 @@ static int __sched task_blocks_on_rt_mutex(struct rt_mutex_base *lock,
 		rt_mutex_dequeue_pi(owner, top_waiter);
 		rt_mutex_enqueue_pi(owner, waiter);
 
-		rt_mutex_adjust_prio(owner);
+		rt_mutex_adjust_prio(lock, owner);
 		if (owner->pi_blocked_on)
 			chain_walk = 1;
 	} else if (rt_mutex_cond_detect_deadlock(waiter, chwalk)) {
@@ -1234,6 +1290,8 @@ static void __sched mark_wakeup_next_waiter(struct rt_wake_q_head *wqh,
 {
 	struct rt_mutex_waiter *waiter;
 
+	lockdep_assert_held(&lock->wait_lock);
+
 	raw_spin_lock(&current->pi_lock);
 
 	waiter = rt_mutex_top_waiter(lock);
@@ -1246,7 +1304,7 @@ static void __sched mark_wakeup_next_waiter(struct rt_wake_q_head *wqh,
 	 * task unblocks.
 	 */
 	rt_mutex_dequeue_pi(current, waiter);
-	rt_mutex_adjust_prio(current);
+	rt_mutex_adjust_prio(lock, current);
 
 	/*
 	 * As we are waking up the top waiter, and the waiter stays
@@ -1482,7 +1540,7 @@ static void __sched remove_waiter(struct rt_mutex_base *lock,
 	if (rt_mutex_has_waiters(lock))
 		rt_mutex_enqueue_pi(owner, rt_mutex_top_waiter(lock));
 
-	rt_mutex_adjust_prio(owner);
+	rt_mutex_adjust_prio(lock, owner);
 
 	/* Store the lock on which owner is blocked or NULL */
 	next_lock = task_blocked_on_lock(owner);
diff --git a/kernel/locking/rtmutex_api.c b/kernel/locking/rtmutex_api.c
index cb9fdff76a8a3..a6974d0445930 100644
--- a/kernel/locking/rtmutex_api.c
+++ b/kernel/locking/rtmutex_api.c
@@ -459,7 +459,7 @@ void __sched rt_mutex_adjust_pi(struct task_struct *task)
 	raw_spin_lock_irqsave(&task->pi_lock, flags);
 
 	waiter = task->pi_blocked_on;
-	if (!waiter || rt_mutex_waiter_equal(waiter, task_to_waiter(task))) {
+	if (!waiter || rt_waiter_node_equal(&waiter->tree, task_to_waiter_node(task))) {
 		raw_spin_unlock_irqrestore(&task->pi_lock, flags);
 		return;
 	}
diff --git a/kernel/locking/rtmutex_common.h b/kernel/locking/rtmutex_common.h
index c47e8361bfb5c..1162e07cdaea1 100644
--- a/kernel/locking/rtmutex_common.h
+++ b/kernel/locking/rtmutex_common.h
@@ -17,27 +17,44 @@
 #include <linux/rtmutex.h>
 #include <linux/sched/wake_q.h>
 
+
+/*
+ * This is a helper for the struct rt_mutex_waiter below. A waiter goes in two
+ * separate trees and they need their own copy of the sort keys because of
+ * different locking requirements.
+ *
+ * @entry:		rbtree node to enqueue into the waiters tree
+ * @prio:		Priority of the waiter
+ * @deadline:		Deadline of the waiter if applicable
+ *
+ * See rt_waiter_node_less() and waiter_*_prio().
+ */
+struct rt_waiter_node {
+	struct rb_node	entry;
+	int		prio;
+	u64		deadline;
+};
+
 /*
  * This is the control structure for tasks blocked on a rt_mutex,
  * which is allocated on the kernel stack on of the blocked task.
  *
- * @tree_entry:		pi node to enqueue into the mutex waiters tree
- * @pi_tree_entry:	pi node to enqueue into the mutex owner waiters tree
+ * @tree:		node to enqueue into the mutex waiters tree
+ * @pi_tree:		node to enqueue into the mutex owner waiters tree
  * @task:		task reference to the blocked task
  * @lock:		Pointer to the rt_mutex on which the waiter blocks
  * @wake_state:		Wakeup state to use (TASK_NORMAL or TASK_RTLOCK_WAIT)
- * @prio:		Priority of the waiter
- * @deadline:		Deadline of the waiter if applicable
  * @ww_ctx:		WW context pointer
+ *
+ * @tree is ordered by @lock->wait_lock
+ * @pi_tree is ordered by rt_mutex_owner(@lock)->pi_lock
  */
 struct rt_mutex_waiter {
-	struct rb_node		tree_entry;
-	struct rb_node		pi_tree_entry;
+	struct rt_waiter_node	tree;
+	struct rt_waiter_node	pi_tree;
 	struct task_struct	*task;
 	struct rt_mutex_base	*lock;
 	unsigned int		wake_state;
-	int			prio;
-	u64			deadline;
 	struct ww_acquire_ctx	*ww_ctx;
 };
 
@@ -105,7 +122,7 @@ static inline bool rt_mutex_waiter_is_top_waiter(struct rt_mutex_base *lock,
 {
 	struct rb_node *leftmost = rb_first_cached(&lock->waiters);
 
-	return rb_entry(leftmost, struct rt_mutex_waiter, tree_entry) == waiter;
+	return rb_entry(leftmost, struct rt_mutex_waiter, tree.entry) == waiter;
 }
 
 static inline struct rt_mutex_waiter *rt_mutex_top_waiter(struct rt_mutex_base *lock)
@@ -113,8 +130,10 @@ static inline struct rt_mutex_waiter *rt_mutex_top_waiter(struct rt_mutex_base *
 	struct rb_node *leftmost = rb_first_cached(&lock->waiters);
 	struct rt_mutex_waiter *w = NULL;
 
+	lockdep_assert_held(&lock->wait_lock);
+
 	if (leftmost) {
-		w = rb_entry(leftmost, struct rt_mutex_waiter, tree_entry);
+		w = rb_entry(leftmost, struct rt_mutex_waiter, tree.entry);
 		BUG_ON(w->lock != lock);
 	}
 	return w;
@@ -127,8 +146,10 @@ static inline int task_has_pi_waiters(struct task_struct *p)
 
 static inline struct rt_mutex_waiter *task_top_pi_waiter(struct task_struct *p)
 {
+	lockdep_assert_held(&p->pi_lock);
+
 	return rb_entry(p->pi_waiters.rb_leftmost, struct rt_mutex_waiter,
-			pi_tree_entry);
+			pi_tree.entry);
 }
 
 #define RT_MUTEX_HAS_WAITERS	1UL
@@ -190,8 +211,8 @@ static inline void debug_rt_mutex_free_waiter(struct rt_mutex_waiter *waiter)
 static inline void rt_mutex_init_waiter(struct rt_mutex_waiter *waiter)
 {
 	debug_rt_mutex_init_waiter(waiter);
-	RB_CLEAR_NODE(&waiter->pi_tree_entry);
-	RB_CLEAR_NODE(&waiter->tree_entry);
+	RB_CLEAR_NODE(&waiter->pi_tree.entry);
+	RB_CLEAR_NODE(&waiter->tree.entry);
 	waiter->wake_state = TASK_NORMAL;
 	waiter->task = NULL;
 }
diff --git a/kernel/locking/ww_mutex.h b/kernel/locking/ww_mutex.h
index 56f139201f246..3ad2cc4823e59 100644
--- a/kernel/locking/ww_mutex.h
+++ b/kernel/locking/ww_mutex.h
@@ -96,25 +96,25 @@ __ww_waiter_first(struct rt_mutex *lock)
 	struct rb_node *n = rb_first(&lock->rtmutex.waiters.rb_root);
 	if (!n)
 		return NULL;
-	return rb_entry(n, struct rt_mutex_waiter, tree_entry);
+	return rb_entry(n, struct rt_mutex_waiter, tree.entry);
 }
 
 static inline struct rt_mutex_waiter *
 __ww_waiter_next(struct rt_mutex *lock, struct rt_mutex_waiter *w)
 {
-	struct rb_node *n = rb_next(&w->tree_entry);
+	struct rb_node *n = rb_next(&w->tree.entry);
 	if (!n)
 		return NULL;
-	return rb_entry(n, struct rt_mutex_waiter, tree_entry);
+	return rb_entry(n, struct rt_mutex_waiter, tree.entry);
 }
 
 static inline struct rt_mutex_waiter *
 __ww_waiter_prev(struct rt_mutex *lock, struct rt_mutex_waiter *w)
 {
-	struct rb_node *n = rb_prev(&w->tree_entry);
+	struct rb_node *n = rb_prev(&w->tree.entry);
 	if (!n)
 		return NULL;
-	return rb_entry(n, struct rt_mutex_waiter, tree_entry);
+	return rb_entry(n, struct rt_mutex_waiter, tree.entry);
 }
 
 static inline struct rt_mutex_waiter *
@@ -123,7 +123,7 @@ __ww_waiter_last(struct rt_mutex *lock)
 	struct rb_node *n = rb_last(&lock->rtmutex.waiters.rb_root);
 	if (!n)
 		return NULL;
-	return rb_entry(n, struct rt_mutex_waiter, tree_entry);
+	return rb_entry(n, struct rt_mutex_waiter, tree.entry);
 }
 
 static inline void
-- 
2.40.1

[PATCH 6.1 194/228] proc/vmcore: fix signedness bug in read_from_oldmem()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@linaro.org>

commit 641db40f3afe7998011bfabc726dba3e698f8196 upstream.

The bug is the error handling:

	if (tmp < nr_bytes) {

"tmp" can hold negative error codes but because "nr_bytes" is type size_t
the negative error codes are treated as very high positive values
(success).  Fix this by changing "nr_bytes" to type ssize_t.  The
"nr_bytes" variable is used to store values between 1 and PAGE_SIZE and
they can fit in ssize_t without any issue.

Link: https://lkml.kernel.org/r/b55f7eed-1c65-4adc-95d1-6c7c65a54a6e@moroto.mountain
Fixes: 5d8de293c224 ("vmcore: convert copy_oldmem_page() to take an iov_iter")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/proc/vmcore.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/proc/vmcore.c
+++ b/fs/proc/vmcore.c
@@ -132,7 +132,7 @@ ssize_t read_from_oldmem(struct iov_iter
 			 u64 *ppos, bool encrypted)
 {
 	unsigned long pfn, offset;
-	size_t nr_bytes;
+	ssize_t nr_bytes;
 	ssize_t read = 0, tmp;
 	int idx;
 

[PATCH 6.1 195/228] xen: speed up grant-table reclaim

[Greg Kroah-Hartman]

From: Demi Marie Obenour <demi@invisiblethingslab.com>

commit c04e9894846c663f3278a414f34416e6e45bbe68 upstream.

When a grant entry is still in use by the remote domain, Linux must put
it on a deferred list.  Normally, this list is very short, because
the PV network and block protocols expect the backend to unmap the grant
first.  However, Qubes OS's GUI protocol is subject to the constraints
of the X Window System, and as such winds up with the frontend unmapping
the window first.  As a result, the list can grow very large, resulting
in a massive memory leak and eventual VM freeze.

To partially solve this problem, make the number of entries that the VM
will attempt to free at each iteration tunable.  The default is still
10, but it can be overridden via a module parameter.

This is Cc: stable because (when combined with appropriate userspace
changes) it fixes a severe performance and stability problem for Qubes
OS users.

Cc: stable@vger.kernel.org
Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230726165354.1252-1-demi@invisiblethingslab.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/ABI/testing/sysfs-module |   11 +++++++++
 drivers/xen/grant-table.c              |   40 +++++++++++++++++++++++----------
 2 files changed, 40 insertions(+), 11 deletions(-)

--- a/Documentation/ABI/testing/sysfs-module
+++ b/Documentation/ABI/testing/sysfs-module
@@ -60,3 +60,14 @@ Description:	Module taint flags:
 			C   staging driver module
 			E   unsigned module
 			==  =====================
+
+What:		/sys/module/grant_table/parameters/free_per_iteration
+Date:		July 2023
+KernelVersion:	6.5 but backported to all supported stable branches
+Contact:	Xen developer discussion <xen-devel@lists.xenproject.org>
+Description:	Read and write number of grant entries to attempt to free per iteration.
+
+		Note: Future versions of Xen and Linux may provide a better
+		interface for controlling the rate of deferred grant reclaim
+		or may not need it at all.
+Users:		Qubes OS (https://www.qubes-os.org)
--- a/drivers/xen/grant-table.c
+++ b/drivers/xen/grant-table.c
@@ -498,14 +498,21 @@ static LIST_HEAD(deferred_list);
 static void gnttab_handle_deferred(struct timer_list *);
 static DEFINE_TIMER(deferred_timer, gnttab_handle_deferred);
 
+static atomic64_t deferred_count;
+static atomic64_t leaked_count;
+static unsigned int free_per_iteration = 10;
+module_param(free_per_iteration, uint, 0600);
+
 static void gnttab_handle_deferred(struct timer_list *unused)
 {
-	unsigned int nr = 10;
+	unsigned int nr = READ_ONCE(free_per_iteration);
+	const bool ignore_limit = nr == 0;
 	struct deferred_entry *first = NULL;
 	unsigned long flags;
+	size_t freed = 0;
 
 	spin_lock_irqsave(&gnttab_list_lock, flags);
-	while (nr--) {
+	while ((ignore_limit || nr--) && !list_empty(&deferred_list)) {
 		struct deferred_entry *entry
 			= list_first_entry(&deferred_list,
 					   struct deferred_entry, list);
@@ -515,10 +522,14 @@ static void gnttab_handle_deferred(struc
 		list_del(&entry->list);
 		spin_unlock_irqrestore(&gnttab_list_lock, flags);
 		if (_gnttab_end_foreign_access_ref(entry->ref)) {
+			uint64_t ret = atomic64_dec_return(&deferred_count);
+
 			put_free_entry(entry->ref);
-			pr_debug("freeing g.e. %#x (pfn %#lx)\n",
-				 entry->ref, page_to_pfn(entry->page));
+			pr_debug("freeing g.e. %#x (pfn %#lx), %llu remaining\n",
+				 entry->ref, page_to_pfn(entry->page),
+				 (unsigned long long)ret);
 			put_page(entry->page);
+			freed++;
 			kfree(entry);
 			entry = NULL;
 		} else {
@@ -530,21 +541,22 @@ static void gnttab_handle_deferred(struc
 		spin_lock_irqsave(&gnttab_list_lock, flags);
 		if (entry)
 			list_add_tail(&entry->list, &deferred_list);
-		else if (list_empty(&deferred_list))
-			break;
 	}
-	if (!list_empty(&deferred_list) && !timer_pending(&deferred_timer)) {
+	if (list_empty(&deferred_list))
+		WARN_ON(atomic64_read(&deferred_count));
+	else if (!timer_pending(&deferred_timer)) {
 		deferred_timer.expires = jiffies + HZ;
 		add_timer(&deferred_timer);
 	}
 	spin_unlock_irqrestore(&gnttab_list_lock, flags);
+	pr_debug("Freed %zu references", freed);
 }
 
 static void gnttab_add_deferred(grant_ref_t ref, struct page *page)
 {
 	struct deferred_entry *entry;
 	gfp_t gfp = (in_atomic() || irqs_disabled()) ? GFP_ATOMIC : GFP_KERNEL;
-	const char *what = KERN_WARNING "leaking";
+	uint64_t leaked, deferred;
 
 	entry = kmalloc(sizeof(*entry), gfp);
 	if (!page) {
@@ -567,10 +579,16 @@ static void gnttab_add_deferred(grant_re
 			add_timer(&deferred_timer);
 		}
 		spin_unlock_irqrestore(&gnttab_list_lock, flags);
-		what = KERN_DEBUG "deferring";
+		deferred = atomic64_inc_return(&deferred_count);
+		leaked = atomic64_read(&leaked_count);
+		pr_debug("deferring g.e. %#x (pfn %#lx) (total deferred %llu, total leaked %llu)\n",
+			 ref, page ? page_to_pfn(page) : -1, deferred, leaked);
+	} else {
+		deferred = atomic64_read(&deferred_count);
+		leaked = atomic64_inc_return(&leaked_count);
+		pr_warn("leaking g.e. %#x (pfn %#lx) (total deferred %llu, total leaked %llu)\n",
+			ref, page ? page_to_pfn(page) : -1, deferred, leaked);
 	}
-	printk("%s g.e. %#x (pfn %#lx)\n",
-	       what, ref, page ? page_to_pfn(page) : -1);
 }
 
 int gnttab_try_end_foreign_access(grant_ref_t ref)

[PATCH 6.1 196/228] virtio-net: fix race between set queues and probe

[Greg Kroah-Hartman]

From: Jason Wang <jasowang@redhat.com>

commit 25266128fe16d5632d43ada34c847d7b8daba539 upstream.

A race were found where set_channels could be called after registering
but before virtnet_set_queues() in virtnet_probe(). Fixing this by
moving the virtnet_set_queues() before netdevice registering. While at
it, use _virtnet_set_queues() to avoid holding rtnl as the device is
not even registered at that time.

Cc: stable@vger.kernel.org
Fixes: a220871be66f ("virtio-net: correctly enable multiqueue")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230725072049.617289-1-jasowang@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/virtio_net.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -3940,6 +3940,8 @@ static int virtnet_probe(struct virtio_d
 	if (vi->has_rss || vi->has_rss_hash_report)
 		virtnet_init_default_rss(vi);
 
+	_virtnet_set_queues(vi, vi->curr_queue_pairs);
+
 	/* serialize netdev register + virtio_device_ready() with ndo_open() */
 	rtnl_lock();
 
@@ -3960,8 +3962,6 @@ static int virtnet_probe(struct virtio_d
 		goto free_unregister_netdev;
 	}
 
-	virtnet_set_queues(vi, vi->curr_queue_pairs);
-
 	/* Assume link up if device can't report link status,
 	   otherwise get link status from config. */
 	netif_carrier_off(dev);

[PATCH 6.1 197/228] net: dsa: qca8k: fix search_and_insert wrong handling of new rule

[Greg Kroah-Hartman]

From: Christian Marangi <ansuelsmth@gmail.com>

commit 80248d4160894d7e40b04111bdbaa4ff93fc4bd7 upstream.

On inserting a mdb entry, fdb_search_and_insert is used to add a port to
the qca8k target entry in the FDB db.

A FDB entry can't be modified so it needs to be removed and insert again
with the new values.

To detect if an entry already exist, the SEARCH operation is used and we
check the aging of the entry. If the entry is not 0, the entry exist and
we proceed to delete it.

Current code have 2 main problem:
- The condition to check if the FDB entry exist is wrong and should be
  the opposite.
- When a FDB entry doesn't exist, aging was never actually set to the
  STATIC value resulting in allocating an invalid entry.

Fix both problem by adding aging support to the function, calling the
function with STATIC as aging by default and finally by correct the
condition to check if the entry actually exist.

Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/dsa/qca/qca8k-common.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/net/dsa/qca/qca8k-common.c
+++ b/drivers/net/dsa/qca/qca8k-common.c
@@ -281,7 +281,7 @@ void qca8k_fdb_flush(struct qca8k_priv *
 }
 
 static int qca8k_fdb_search_and_insert(struct qca8k_priv *priv, u8 port_mask,
-				       const u8 *mac, u16 vid)
+				       const u8 *mac, u16 vid, u8 aging)
 {
 	struct qca8k_fdb fdb = { 0 };
 	int ret;
@@ -298,10 +298,12 @@ static int qca8k_fdb_search_and_insert(s
 		goto exit;
 
 	/* Rule exist. Delete first */
-	if (!fdb.aging) {
+	if (fdb.aging) {
 		ret = qca8k_fdb_access(priv, QCA8K_FDB_PURGE, -1);
 		if (ret)
 			goto exit;
+	} else {
+		fdb.aging = aging;
 	}
 
 	/* Add port to fdb portmask */
@@ -847,7 +849,8 @@ int qca8k_port_mdb_add(struct dsa_switch
 	const u8 *addr = mdb->addr;
 	u16 vid = mdb->vid;
 
-	return qca8k_fdb_search_and_insert(priv, BIT(port), addr, vid);
+	return qca8k_fdb_search_and_insert(priv, BIT(port), addr, vid,
+					   QCA8K_ATU_STATUS_STATIC);
 }
 
 int qca8k_port_mdb_del(struct dsa_switch *ds, int port,

[PATCH 6.1 198/228] net: dsa: qca8k: fix broken search_and_del

[Greg Kroah-Hartman]

From: Christian Marangi <ansuelsmth@gmail.com>

commit ae70dcb9d9ecaf7d9836d3e1b5bef654d7ef5680 upstream.

On deleting an MDB entry for a port, fdb_search_and_del is used.
An FDB entry can't be modified so it needs to be deleted and readded
again with the new portmap (and the port deleted as requested)

We use the SEARCH operator to search the entry to edit by vid and mac
address and then we check the aging if we actually found an entry.

Currently the code suffer from a bug where the searched fdb entry is
never read again with the found values (if found) resulting in the code
always returning -EINVAL as aging was always 0.

Fix this by correctly read the fdb entry after it was searched.

Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/dsa/qca/qca8k-common.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/net/dsa/qca/qca8k-common.c
+++ b/drivers/net/dsa/qca/qca8k-common.c
@@ -330,6 +330,10 @@ static int qca8k_fdb_search_and_del(stru
 	if (ret < 0)
 		goto exit;
 
+	ret = qca8k_fdb_read(priv, &fdb);
+	if (ret < 0)
+		goto exit;
+
 	/* Rule doesn't exist. Why delete? */
 	if (!fdb.aging) {
 		ret = -EINVAL;

[PATCH 6.1 199/228] net: dsa: qca8k: fix mdb add/del case with 0 VID

[Greg Kroah-Hartman]

From: Christian Marangi <ansuelsmth@gmail.com>

commit dfd739f182b00b02bd7470ed94d112684cc04fa2 upstream.

The qca8k switch doesn't support using 0 as VID and require a default
VID to be always set. MDB add/del function doesn't currently handle
this and are currently setting the default VID.

Fix this by correctly handling this corner case and internally use the
default VID for VID 0 case.

Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/dsa/qca/qca8k-common.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/net/dsa/qca/qca8k-common.c
+++ b/drivers/net/dsa/qca/qca8k-common.c
@@ -853,6 +853,9 @@ int qca8k_port_mdb_add(struct dsa_switch
 	const u8 *addr = mdb->addr;
 	u16 vid = mdb->vid;
 
+	if (!vid)
+		vid = QCA8K_PORT_VID_DEF;
+
 	return qca8k_fdb_search_and_insert(priv, BIT(port), addr, vid,
 					   QCA8K_ATU_STATUS_STATIC);
 }
@@ -865,6 +868,9 @@ int qca8k_port_mdb_del(struct dsa_switch
 	const u8 *addr = mdb->addr;
 	u16 vid = mdb->vid;
 
+	if (!vid)
+		vid = QCA8K_PORT_VID_DEF;
+
 	return qca8k_fdb_search_and_del(priv, BIT(port), addr, vid);
 }
 

[PATCH 6.1 200/228] selftests/rseq: Play nice with binaries statically linked against glibc 2.35+

[Greg Kroah-Hartman]

From: Sean Christopherson <seanjc@google.com>

commit 3bcbc20942db5d738221cca31a928efc09827069 upstream.

To allow running rseq and KVM's rseq selftests as statically linked
binaries, initialize the various "trampoline" pointers to point directly
at the expect glibc symbols, and skip the dlysm() lookups if the rseq
size is non-zero, i.e. the binary is statically linked *and* the libc
registered its own rseq.

Define weak versions of the symbols so as not to break linking against
libc versions that don't support rseq in any capacity.

The KVM selftests in particular are often statically linked so that they
can be run on targets with very limited runtime environments, i.e. test
machines.

Fixes: 233e667e1ae3 ("selftests/rseq: Uplift rseq selftests for compatibility with glibc-2.35")
Cc: Aaron Lewis <aaronlewis@google.com>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230721223352.2333911-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/rseq/rseq.c |   28 ++++++++++++++++++++++------
 1 file changed, 22 insertions(+), 6 deletions(-)

--- a/tools/testing/selftests/rseq/rseq.c
+++ b/tools/testing/selftests/rseq/rseq.c
@@ -32,9 +32,17 @@
 #include "../kselftest.h"
 #include "rseq.h"
 
-static const ptrdiff_t *libc_rseq_offset_p;
-static const unsigned int *libc_rseq_size_p;
-static const unsigned int *libc_rseq_flags_p;
+/*
+ * Define weak versions to play nice with binaries that are statically linked
+ * against a libc that doesn't support registering its own rseq.
+ */
+__weak ptrdiff_t __rseq_offset;
+__weak unsigned int __rseq_size;
+__weak unsigned int __rseq_flags;
+
+static const ptrdiff_t *libc_rseq_offset_p = &__rseq_offset;
+static const unsigned int *libc_rseq_size_p = &__rseq_size;
+static const unsigned int *libc_rseq_flags_p = &__rseq_flags;
 
 /* Offset from the thread pointer to the rseq area.  */
 ptrdiff_t rseq_offset;
@@ -108,9 +116,17 @@ int rseq_unregister_current_thread(void)
 static __attribute__((constructor))
 void rseq_init(void)
 {
-	libc_rseq_offset_p = dlsym(RTLD_NEXT, "__rseq_offset");
-	libc_rseq_size_p = dlsym(RTLD_NEXT, "__rseq_size");
-	libc_rseq_flags_p = dlsym(RTLD_NEXT, "__rseq_flags");
+	/*
+	 * If the libc's registered rseq size isn't already valid, it may be
+	 * because the binary is dynamically linked and not necessarily due to
+	 * libc not having registered a restartable sequence.  Try to find the
+	 * symbols if that's the case.
+	 */
+	if (!*libc_rseq_size_p) {
+		libc_rseq_offset_p = dlsym(RTLD_NEXT, "__rseq_offset");
+		libc_rseq_size_p = dlsym(RTLD_NEXT, "__rseq_size");
+		libc_rseq_flags_p = dlsym(RTLD_NEXT, "__rseq_flags");
+	}
 	if (libc_rseq_size_p && libc_rseq_offset_p && libc_rseq_flags_p &&
 			*libc_rseq_size_p != 0) {
 		/* rseq registration owned by glibc */

[PATCH 6.1 201/228] selftests: mptcp: join: only check for ip6tables if needed

[Greg Kroah-Hartman]

From: Matthieu Baerts <matthieu.baerts@tessares.net>

commit 016e7ba47f33064fbef8c4307a2485d2669dfd03 upstream.

If 'iptables-legacy' is available, 'ip6tables-legacy' command will be
used instead of 'ip6tables'. So no need to look if 'ip6tables' is
available in this case.

Cc: stable@vger.kernel.org
Fixes: 0c4cd3f86a40 ("selftests: mptcp: join: use 'iptables-legacy' if available")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230725-send-net-20230725-v1-1-6f60fe7137a9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/net/mptcp/mptcp_join.sh |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -151,9 +151,7 @@ check_tools()
 	elif ! iptables -V &> /dev/null; then
 		echo "SKIP: Could not run all tests without iptables tool"
 		exit $ksft_skip
-	fi
-
-	if ! ip6tables -V &> /dev/null; then
+	elif ! ip6tables -V &> /dev/null; then
 		echo "SKIP: Could not run all tests without ip6tables tool"
 		exit $ksft_skip
 	fi

[PATCH 6.1 202/228] soundwire: fix enumeration completion

[Greg Kroah-Hartman]

From: Johan Hovold <johan+linaro@kernel.org>

commit c40d6b3249b11d60e09d81530588f56233d9aa44 upstream.

The soundwire subsystem uses two completion structures that allow
drivers to wait for soundwire device to become enumerated on the bus and
initialised by their drivers, respectively.

The code implementing the signalling is currently broken as it does not
signal all current and future waiters and also uses the wrong
reinitialisation function, which can potentially lead to memory
corruption if there are still waiters on the queue.

Not signalling future waiters specifically breaks sound card probe
deferrals as codec drivers can not tell that the soundwire device is
already attached when being reprobed. Some codec runtime PM
implementations suffer from similar problems as waiting for enumeration
during resume can also timeout despite the device already having been
enumerated.

Fixes: fb9469e54fa7 ("soundwire: bus: fix race condition with enumeration_complete signaling")
Fixes: a90def068127 ("soundwire: bus: fix race condition with initialization_complete signaling")
Cc: stable@vger.kernel.org      # 5.7
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230705123018.30903-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/soundwire/bus.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/soundwire/bus.c
+++ b/drivers/soundwire/bus.c
@@ -884,8 +884,8 @@ static void sdw_modify_slave_status(stru
 			"initializing enumeration and init completion for Slave %d\n",
 			slave->dev_num);
 
-		init_completion(&slave->enumeration_complete);
-		init_completion(&slave->initialization_complete);
+		reinit_completion(&slave->enumeration_complete);
+		reinit_completion(&slave->initialization_complete);
 
 	} else if ((status == SDW_SLAVE_ATTACHED) &&
 		   (slave->status == SDW_SLAVE_UNATTACHED)) {
@@ -893,7 +893,7 @@ static void sdw_modify_slave_status(stru
 			"signaling enumeration completion for Slave %d\n",
 			slave->dev_num);
 
-		complete(&slave->enumeration_complete);
+		complete_all(&slave->enumeration_complete);
 	}
 	slave->status = status;
 	mutex_unlock(&bus->bus_lock);
@@ -1916,7 +1916,7 @@ int sdw_handle_slave_status(struct sdw_b
 				"signaling initialization completion for Slave %d\n",
 				slave->dev_num);
 
-			complete(&slave->initialization_complete);
+			complete_all(&slave->initialization_complete);
 
 			/*
 			 * If the manager became pm_runtime active, the peripherals will be

[PATCH 6.1 203/228] Revert "um: Use swap() to make code cleaner"

[Greg Kroah-Hartman]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

commit dddfa05eb58076ad60f9a66e7155a5b3502b2dd5 upstream.

This reverts commit 9b0da3f22307af693be80f5d3a89dc4c7f360a85.

The sigio.c is clearly user space code which is handled by
arch/um/scripts/Makefile.rules (see USER_OBJS rule).

The above mentioned commit simply broke this agreement,
we may not use Linux kernel internal headers in them without
thorough thinking.

Hence, revert the wrong commit.

Link: https://lkml.kernel.org/r/20230724143131.30090-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307212304.cH79zJp1-lkp@intel.com/
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Herve Codina <herve.codina@bootlin.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Richard Weinberger <richard@nod.at>
Cc: Yang Guang <yang.guang5@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/um/os-Linux/sigio.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/arch/um/os-Linux/sigio.c
+++ b/arch/um/os-Linux/sigio.c
@@ -3,7 +3,6 @@
  * Copyright (C) 2002 - 2008 Jeff Dike (jdike@{addtoit,linux.intel}.com)
  */
 
-#include <linux/minmax.h>
 #include <unistd.h>
 #include <errno.h>
 #include <fcntl.h>
@@ -51,7 +50,7 @@ static struct pollfds all_sigio_fds;
 
 static int write_sigio_thread(void *unused)
 {
-	struct pollfds *fds;
+	struct pollfds *fds, tmp;
 	struct pollfd *p;
 	int i, n, respond_fd;
 	char c;
@@ -78,7 +77,9 @@ static int write_sigio_thread(void *unus
 					       "write_sigio_thread : "
 					       "read on socket failed, "
 					       "err = %d\n", errno);
-				swap(current_poll, next_poll);
+				tmp = current_poll;
+				current_poll = next_poll;
+				next_poll = tmp;
 				respond_fd = sigio_private[1];
 			}
 			else {

[PATCH 6.1 204/228] LoongArch: BPF: Fix check condition to call lu32id in move_imm()

[Greg Kroah-Hartman]

From: Tiezhu Yang <yangtiezhu@loongson.cn>

commit 4eece7e6de94d833c8aeed2f438faf487cbf94ff upstream.

As the code comment says, the initial aim is to reduce one instruction
in some corner cases, if bit[51:31] is all 0 or all 1, no need to call
lu32id. That is to say, it should call lu32id only if bit[51:31] is not
all 0 and not all 1. The current code always call lu32id, the result is
right but the logic is unexpected and wrong, fix it.

Cc: stable@vger.kernel.org # 6.1
Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support")
Reported-by: Colin King (gmail) <colin.i.king@gmail.com>
Closes: https://lore.kernel.org/all/bcf97046-e336-712a-ac68-7fd194f2953e@gmail.com/
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/loongarch/net/bpf_jit.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/loongarch/net/bpf_jit.h
+++ b/arch/loongarch/net/bpf_jit.h
@@ -148,7 +148,7 @@ static inline void move_imm(struct jit_c
 			 * no need to call lu32id to do a new filled operation.
 			 */
 			imm_51_31 = (imm >> 31) & 0x1fffff;
-			if (imm_51_31 != 0 || imm_51_31 != 0x1fffff) {
+			if (imm_51_31 != 0 && imm_51_31 != 0x1fffff) {
 				/* lu32id rd, imm_51_32 */
 				imm_51_32 = (imm >> 32) & 0xfffff;
 				emit_insn(ctx, lu32id, rd, imm_51_32);

[PATCH 6.1 205/228] LoongArch: BPF: Enable bpf_probe_read{, str}() on LoongArch

[Greg Kroah-Hartman]

From: Chenguang Zhao <zhaochenguang@kylinos.cn>

commit de0e30bee86d0f99c696a1fea34474e556a946ec upstream.

Currently nettrace does not work on LoongArch due to missing
bpf_probe_read{,str}() support, with the error message:

     ERROR: failed to load kprobe-based eBPF
     ERROR: failed to load kprobe-based bpf

According to commit 0ebeea8ca8a4d1d ("bpf: Restrict bpf_probe_read{,
str}() only to archs where they work"), we only need to select
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE to add said support,
because LoongArch does have non-overlapping address ranges for kernel
and userspace.

Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/loongarch/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/loongarch/Kconfig
+++ b/arch/loongarch/Kconfig
@@ -10,6 +10,7 @@ config LOONGARCH
 	select ARCH_ENABLE_MEMORY_HOTPLUG
 	select ARCH_ENABLE_MEMORY_HOTREMOVE
 	select ARCH_HAS_ACPI_TABLE_UPGRADE	if ACPI
+	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
 	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_INLINE_READ_LOCK if !PREEMPTION

[PATCH 6.1 206/228] s390/dasd: fix hanging device after quiesce/resume

[Greg Kroah-Hartman]

From: Stefan Haberland <sth@linux.ibm.com>

commit 05f1d8ed03f547054efbc4d29bb7991c958ede95 upstream.

Quiesce and resume are functions that tell the DASD driver to stop/resume
issuing I/Os to a specific DASD.

On resume dasd_schedule_block_bh() is called to kick handling of IO
requests again. This does unfortunately not cover internal requests which
are used for path verification for example.

This could lead to a hanging device when a path event or anything else
that triggers internal requests occurs on a quiesced device.

Fix by also calling dasd_schedule_device_bh() which triggers handling of
internal requests on resume.

Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1")

Cc: stable@vger.kernel.org
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20230721193647.3889634-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/s390/block/dasd_ioctl.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/s390/block/dasd_ioctl.c
+++ b/drivers/s390/block/dasd_ioctl.c
@@ -131,6 +131,7 @@ static int dasd_ioctl_resume(struct dasd
 	spin_unlock_irqrestore(get_ccwdev_lock(base->cdev), flags);
 
 	dasd_schedule_block_bh(block);
+	dasd_schedule_device_bh(base);
 	return 0;
 }
 

[PATCH 6.1 207/228] s390/dasd: print copy pair message only for the correct error

[Greg Kroah-Hartman]

From: Stefan Haberland <sth@linux.ibm.com>

commit 856d8e3c633b183df23549ce760ae84478a7098d upstream.

The DASD driver has certain types of requests that might be rejected by
the storage server or z/VM because they are not supported. Since the
missing support of the command is not a real issue there is no user
visible kernel error message for this.

For copy pair setups  there is a specific error that IO is not allowed on
secondary devices. This error case is explicitly handled and an error
message is printed.

The code checking for the error did use a bitwise 'and' that is used to
check for specific bits. But in this case the whole sense byte has to
match.

This leads to the problem that the copy pair related error message is
erroneously printed for other error cases that are usually not reported.
This might heavily confuse users and lead to follow on actions that might
disrupt application processing.

Fix by checking the sense byte for the exact value and not single bits.

Cc: stable@vger.kernel.org # 6.1+
Fixes: 1fca631a1185 ("s390/dasd: suppress generic error messages for PPRC secondary devices")
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20230721193647.3889634-5-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/s390/block/dasd_3990_erp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/s390/block/dasd_3990_erp.c b/drivers/s390/block/dasd_3990_erp.c
index 91e9a17b848e..89957bb7244d 100644
--- a/drivers/s390/block/dasd_3990_erp.c
+++ b/drivers/s390/block/dasd_3990_erp.c
@@ -1050,7 +1050,7 @@ dasd_3990_erp_com_rej(struct dasd_ccw_req * erp, char *sense)
 		dev_err(&device->cdev->dev, "An I/O request was rejected"
 			" because writing is inhibited\n");
 		erp = dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED);
-	} else if (sense[7] & SNS7_INVALID_ON_SEC) {
+	} else if (sense[7] == SNS7_INVALID_ON_SEC) {
 		dev_err(&device->cdev->dev, "An I/O request was rejected on a copy pair secondary device\n");
 		/* suppress dump of sense data for this error */
 		set_bit(DASD_CQR_SUPPRESS_CR, &erp->refers->flags);
-- 
2.41.0

[PATCH 6.1 208/228] ASoC: wm8904: Fill the cache for WM8904_ADC_TEST_0 register

[Greg Kroah-Hartman]

From: Mark Brown <broonie@kernel.org>

commit f061e2be8689057cb4ec0dbffa9f03e1a23cdcb2 upstream.

The WM8904_ADC_TEST_0 register is modified as part of updating the OSR
controls but does not have a cache default, leading to errors when we try
to modify these controls in cache only mode with no prior read:

wm8904 3-001a: ASoC: error at snd_soc_component_update_bits on wm8904.3-001a for register: [0x000000c6] -16

Add a read of the register to probe() to fill the cache and avoid both the
error messages and the misconfiguration of the chip which will result.

Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230723-asoc-fix-wm8904-adc-test-read-v1-1-2cdf2edd83fd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/codecs/wm8904.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/sound/soc/codecs/wm8904.c
+++ b/sound/soc/codecs/wm8904.c
@@ -2308,6 +2308,9 @@ static int wm8904_i2c_probe(struct i2c_c
 	regmap_update_bits(wm8904->regmap, WM8904_BIAS_CONTROL_0,
 			    WM8904_POBCTRL, 0);
 
+	/* Fill the cache for the ADC test register */
+	regmap_read(wm8904->regmap, WM8904_ADC_TEST_0, &val);
+
 	/* Can leave the device powered off until we need it */
 	regcache_cache_only(wm8904->regmap, true);
 	regulator_bulk_disable(ARRAY_SIZE(wm8904->supplies), wm8904->supplies);

[PATCH 6.1 209/228] arm64/sme: Set new vector length before reallocating

[Greg Kroah-Hartman]

From: Mark Brown <broonie@kernel.org>

commit 05d881b85b48c7ac6a7c92ce00aa916c4a84d052 upstream.

As part of fixing the allocation of the buffer for SVE state when changing
SME vector length we introduced an immediate reallocation of the SVE state,
this is also done when changing the SVE vector length for consistency.
Unfortunately this reallocation is done prior to writing the new vector
length to the task struct, meaning the allocation is done with the old
vector length and can lead to memory corruption due to an undersized buffer
being used.

Move the update of the vector length before the allocation to ensure that
the new vector length is taken into account.

For some reason this isn't triggering any problems when running tests on
the arm64 fixes branch (even after repeated tries) but is triggering
issues very often after merge into mainline.

Fixes: d4d5be94a878 ("arm64/fpsimd: Ensure SME storage is allocated after SVE VL changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230726-arm64-fix-sme-fix-v1-1-7752ec58af27@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/kernel/fpsimd.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -871,6 +871,8 @@ int vec_set_vector_length(struct task_st
 	if (task == current)
 		put_cpu_fpsimd_context();
 
+	task_set_vl(task, type, vl);
+
 	/*
 	 * Free the changed states if they are not in use, SME will be
 	 * reallocated to the correct size on next use and we just
@@ -885,8 +887,6 @@ int vec_set_vector_length(struct task_st
 	if (free_sme)
 		sme_free(task);
 
-	task_set_vl(task, type, vl);
-
 out:
 	update_tsk_thread_flag(task, vec_vl_inherit_flag(type),
 			       flags & PR_SVE_VL_INHERIT);

[PATCH 6.1 210/228] PM: sleep: wakeirq: fix wake irq arming

[Greg Kroah-Hartman]

From: Johan Hovold <johan+linaro@kernel.org>

commit 8527beb12087238d4387607597b4020bc393c4b4 upstream.

The decision whether to enable a wake irq during suspend can not be done
based on the runtime PM state directly as a driver may use wake irqs
without implementing runtime PM. Such drivers specifically leave the
state set to the default 'suspended' and the wake irq is thus never
enabled at suspend.

Add a new wake irq flag to track whether a dedicated wake irq has been
enabled at runtime suspend and therefore must not be enabled at system
suspend.

Note that pm_runtime_enabled() can not be used as runtime PM is always
disabled during late suspend.

Fixes: 69728051f5bf ("PM / wakeirq: Fix unbalanced IRQ enable for wakeirq")
Cc: 4.16+ <stable@vger.kernel.org> # 4.16+
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/base/power/power.h   |    1 +
 drivers/base/power/wakeirq.c |   12 ++++++++----
 2 files changed, 9 insertions(+), 4 deletions(-)

--- a/drivers/base/power/power.h
+++ b/drivers/base/power/power.h
@@ -29,6 +29,7 @@ extern u64 pm_runtime_active_time(struct
 #define WAKE_IRQ_DEDICATED_MASK		(WAKE_IRQ_DEDICATED_ALLOCATED | \
 					 WAKE_IRQ_DEDICATED_MANAGED | \
 					 WAKE_IRQ_DEDICATED_REVERSE)
+#define WAKE_IRQ_DEDICATED_ENABLED	BIT(3)
 
 struct wake_irq {
 	struct device *dev;
--- a/drivers/base/power/wakeirq.c
+++ b/drivers/base/power/wakeirq.c
@@ -314,8 +314,10 @@ void dev_pm_enable_wake_irq_check(struct
 	return;
 
 enable:
-	if (!can_change_status || !(wirq->status & WAKE_IRQ_DEDICATED_REVERSE))
+	if (!can_change_status || !(wirq->status & WAKE_IRQ_DEDICATED_REVERSE)) {
 		enable_irq(wirq->irq);
+		wirq->status |= WAKE_IRQ_DEDICATED_ENABLED;
+	}
 }
 
 /**
@@ -336,8 +338,10 @@ void dev_pm_disable_wake_irq_check(struc
 	if (cond_disable && (wirq->status & WAKE_IRQ_DEDICATED_REVERSE))
 		return;
 
-	if (wirq->status & WAKE_IRQ_DEDICATED_MANAGED)
+	if (wirq->status & WAKE_IRQ_DEDICATED_MANAGED) {
+		wirq->status &= ~WAKE_IRQ_DEDICATED_ENABLED;
 		disable_irq_nosync(wirq->irq);
+	}
 }
 
 /**
@@ -376,7 +380,7 @@ void dev_pm_arm_wake_irq(struct wake_irq
 
 	if (device_may_wakeup(wirq->dev)) {
 		if (wirq->status & WAKE_IRQ_DEDICATED_ALLOCATED &&
-		    !pm_runtime_status_suspended(wirq->dev))
+		    !(wirq->status & WAKE_IRQ_DEDICATED_ENABLED))
 			enable_irq(wirq->irq);
 
 		enable_irq_wake(wirq->irq);
@@ -399,7 +403,7 @@ void dev_pm_disarm_wake_irq(struct wake_
 		disable_irq_wake(wirq->irq);
 
 		if (wirq->status & WAKE_IRQ_DEDICATED_ALLOCATED &&
-		    !pm_runtime_status_suspended(wirq->dev))
+		    !(wirq->status & WAKE_IRQ_DEDICATED_ENABLED))
 			disable_irq_nosync(wirq->irq);
 	}
 }

[PATCH 6.1 211/228] ceph: never send metrics if disable_send_metrics is set

[Greg Kroah-Hartman]

From: Xiubo Li <xiubli@redhat.com>

commit 50164507f6b7b7ed85d8c3ac0266849fbd908db7 upstream.

Even the 'disable_send_metrics' is true so when the session is
being opened it will always trigger to send the metric for the
first time.

Cc: stable@vger.kernel.org
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Venky Shankar <vshankar@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ceph/metric.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/ceph/metric.c
+++ b/fs/ceph/metric.c
@@ -208,7 +208,7 @@ static void metric_delayed_work(struct w
 	struct ceph_mds_client *mdsc =
 		container_of(m, struct ceph_mds_client, metric);
 
-	if (mdsc->stopping)
+	if (mdsc->stopping || disable_send_metrics)
 		return;
 
 	if (!m->session || !check_session_state(m->session)) {

[PATCH 6.1 212/228] drm/i915/dpt: Use shmem for dpt objects

[Greg Kroah-Hartman]

From: Radhakrishna Sripada <radhakrishna.sripada@intel.com>

commit 3844ed5e78823eebb5f0f1edefc403310693d402 upstream.

Dpt objects that are created from internal get evicted when there is
memory pressure and do not get restored when pinned during scanout. The
pinned page table entries look corrupted and programming the display
engine with the incorrect pte's result in DE throwing pipe faults.

Create DPT objects from shmem and mark the object as dirty when pinning so
that the object is restored when shrinker evicts an unpinned buffer object.

v2: Unconditionally mark the dpt objects dirty during pinning(Chris).

Fixes: 0dc987b699ce ("drm/i915/display: Add smem fallback allocation for dpt")
Cc: <stable@vger.kernel.org> # v6.0+
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Suggested-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Fei Yang <fei.yang@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230718225118.2562132-1-radhakrishna.sripada@intel.com
(cherry picked from commit e91a777a6e602ba0e3366e053e4e094a334a1244)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/i915/display/intel_dpt.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/i915/display/intel_dpt.c
+++ b/drivers/gpu/drm/i915/display/intel_dpt.c
@@ -163,6 +163,8 @@ struct i915_vma *intel_dpt_pin(struct i9
 		i915_vma_get(vma);
 	}
 
+	dpt->obj->mm.dirty = true;
+
 	atomic_dec(&i915->gpu_error.pending_fb_pin);
 	intel_runtime_pm_put(&i915->runtime_pm, wakeref);
 
@@ -258,7 +260,7 @@ intel_dpt_create(struct intel_framebuffe
 		dpt_obj = i915_gem_object_create_stolen(i915, size);
 	if (IS_ERR(dpt_obj) && !HAS_LMEM(i915)) {
 		drm_dbg_kms(&i915->drm, "Allocating dpt from smem\n");
-		dpt_obj = i915_gem_object_create_internal(i915, size);
+		dpt_obj = i915_gem_object_create_shmem(i915, size);
 	}
 	if (IS_ERR(dpt_obj))
 		return ERR_CAST(dpt_obj);

[PATCH 6.1 213/228] dm cache policy smq: ensure IO doesnt prevent cleaner policy progress

[Greg Kroah-Hartman]

From: Joe Thornber <ejt@redhat.com>

commit 1e4ab7b4c881cf26c1c72b3f56519e03475486fb upstream.

When using the cleaner policy to decommission the cache, there is
never any writeback started from the cache as it is constantly delayed
due to normal I/O keeping the device busy. Meaning @idle=false was
always being passed to clean_target_met()

Fix this by adding a specific 'cleaner' flag that is set when the
cleaner policy is configured. This flag serves to always allow the
cleaner's writeback work to be queued until the cache is
decommissioned (even if the cache isn't idle).

Reported-by: David Jeffery <djeffery@redhat.com>
Fixes: b29d4986d0da ("dm cache: significant rework to leverage dm-bio-prison-v2")
Cc: stable@vger.kernel.org
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/dm-cache-policy-smq.c |   28 ++++++++++++++++++----------
 1 file changed, 18 insertions(+), 10 deletions(-)

--- a/drivers/md/dm-cache-policy-smq.c
+++ b/drivers/md/dm-cache-policy-smq.c
@@ -855,7 +855,13 @@ struct smq_policy {
 
 	struct background_tracker *bg_work;
 
-	bool migrations_allowed;
+	bool migrations_allowed:1;
+
+	/*
+	 * If this is set the policy will try and clean the whole cache
+	 * even if the device is not idle.
+	 */
+	bool cleaner:1;
 };
 
 /*----------------------------------------------------------------*/
@@ -1136,7 +1142,7 @@ static bool clean_target_met(struct smq_
 	 * Cache entries may not be populated.  So we cannot rely on the
 	 * size of the clean queue.
 	 */
-	if (idle) {
+	if (idle || mq->cleaner) {
 		/*
 		 * We'd like to clean everything.
 		 */
@@ -1719,11 +1725,9 @@ static void calc_hotspot_params(sector_t
 		*hotspot_block_size /= 2u;
 }
 
-static struct dm_cache_policy *__smq_create(dm_cblock_t cache_size,
-					    sector_t origin_size,
-					    sector_t cache_block_size,
-					    bool mimic_mq,
-					    bool migrations_allowed)
+static struct dm_cache_policy *
+__smq_create(dm_cblock_t cache_size, sector_t origin_size, sector_t cache_block_size,
+	     bool mimic_mq, bool migrations_allowed, bool cleaner)
 {
 	unsigned int i;
 	unsigned int nr_sentinels_per_queue = 2u * NR_CACHE_LEVELS;
@@ -1810,6 +1814,7 @@ static struct dm_cache_policy *__smq_cre
 		goto bad_btracker;
 
 	mq->migrations_allowed = migrations_allowed;
+	mq->cleaner = cleaner;
 
 	return &mq->policy;
 
@@ -1833,21 +1838,24 @@ static struct dm_cache_policy *smq_creat
 					  sector_t origin_size,
 					  sector_t cache_block_size)
 {
-	return __smq_create(cache_size, origin_size, cache_block_size, false, true);
+	return __smq_create(cache_size, origin_size, cache_block_size,
+			    false, true, false);
 }
 
 static struct dm_cache_policy *mq_create(dm_cblock_t cache_size,
 					 sector_t origin_size,
 					 sector_t cache_block_size)
 {
-	return __smq_create(cache_size, origin_size, cache_block_size, true, true);
+	return __smq_create(cache_size, origin_size, cache_block_size,
+			    true, true, false);
 }
 
 static struct dm_cache_policy *cleaner_create(dm_cblock_t cache_size,
 					      sector_t origin_size,
 					      sector_t cache_block_size)
 {
-	return __smq_create(cache_size, origin_size, cache_block_size, false, false);
+	return __smq_create(cache_size, origin_size, cache_block_size,
+			    false, false, true);
 }
 
 /*----------------------------------------------------------------*/

[PATCH 6.1 214/228] rbd: make get_lock_owner_info() return a single locker or NULL

[Greg Kroah-Hartman]

From: Ilya Dryomov <idryomov@gmail.com>

commit f38cb9d9c2045dad16eead4a2e1aedfddd94603b upstream.

Make the "num_lockers can be only 0 or 1" assumption explicit and
simplify the API by getting rid of output parameters in preparation
for calling get_lock_owner_info() twice before blocklisting.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/rbd.c |   84 +++++++++++++++++++++++++++++++---------------------
 1 file changed, 51 insertions(+), 33 deletions(-)

--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -3850,10 +3850,17 @@ static void wake_lock_waiters(struct rbd
 	list_splice_tail_init(&rbd_dev->acquiring_list, &rbd_dev->running_list);
 }
 
-static int get_lock_owner_info(struct rbd_device *rbd_dev,
-			       struct ceph_locker **lockers, u32 *num_lockers)
+static void free_locker(struct ceph_locker *locker)
+{
+	if (locker)
+		ceph_free_lockers(locker, 1);
+}
+
+static struct ceph_locker *get_lock_owner_info(struct rbd_device *rbd_dev)
 {
 	struct ceph_osd_client *osdc = &rbd_dev->rbd_client->client->osdc;
+	struct ceph_locker *lockers;
+	u32 num_lockers;
 	u8 lock_type;
 	char *lock_tag;
 	int ret;
@@ -3862,39 +3869,45 @@ static int get_lock_owner_info(struct rb
 
 	ret = ceph_cls_lock_info(osdc, &rbd_dev->header_oid,
 				 &rbd_dev->header_oloc, RBD_LOCK_NAME,
-				 &lock_type, &lock_tag, lockers, num_lockers);
-	if (ret)
-		return ret;
+				 &lock_type, &lock_tag, &lockers, &num_lockers);
+	if (ret) {
+		rbd_warn(rbd_dev, "failed to retrieve lockers: %d", ret);
+		return ERR_PTR(ret);
+	}
 
-	if (*num_lockers == 0) {
+	if (num_lockers == 0) {
 		dout("%s rbd_dev %p no lockers detected\n", __func__, rbd_dev);
+		lockers = NULL;
 		goto out;
 	}
 
 	if (strcmp(lock_tag, RBD_LOCK_TAG)) {
 		rbd_warn(rbd_dev, "locked by external mechanism, tag %s",
 			 lock_tag);
-		ret = -EBUSY;
-		goto out;
+		goto err_busy;
 	}
 
 	if (lock_type == CEPH_CLS_LOCK_SHARED) {
 		rbd_warn(rbd_dev, "shared lock type detected");
-		ret = -EBUSY;
-		goto out;
+		goto err_busy;
 	}
 
-	if (strncmp((*lockers)[0].id.cookie, RBD_LOCK_COOKIE_PREFIX,
+	WARN_ON(num_lockers != 1);
+	if (strncmp(lockers[0].id.cookie, RBD_LOCK_COOKIE_PREFIX,
 		    strlen(RBD_LOCK_COOKIE_PREFIX))) {
 		rbd_warn(rbd_dev, "locked by external mechanism, cookie %s",
-			 (*lockers)[0].id.cookie);
-		ret = -EBUSY;
-		goto out;
+			 lockers[0].id.cookie);
+		goto err_busy;
 	}
 
 out:
 	kfree(lock_tag);
-	return ret;
+	return lockers;
+
+err_busy:
+	kfree(lock_tag);
+	ceph_free_lockers(lockers, num_lockers);
+	return ERR_PTR(-EBUSY);
 }
 
 static int find_watcher(struct rbd_device *rbd_dev,
@@ -3948,51 +3961,56 @@ out:
 static int rbd_try_lock(struct rbd_device *rbd_dev)
 {
 	struct ceph_client *client = rbd_dev->rbd_client->client;
-	struct ceph_locker *lockers;
-	u32 num_lockers;
+	struct ceph_locker *locker;
 	int ret;
 
 	for (;;) {
+		locker = NULL;
+
 		ret = rbd_lock(rbd_dev);
 		if (ret != -EBUSY)
-			return ret;
+			goto out;
 
 		/* determine if the current lock holder is still alive */
-		ret = get_lock_owner_info(rbd_dev, &lockers, &num_lockers);
-		if (ret)
-			return ret;
-
-		if (num_lockers == 0)
+		locker = get_lock_owner_info(rbd_dev);
+		if (IS_ERR(locker)) {
+			ret = PTR_ERR(locker);
+			locker = NULL;
+			goto out;
+		}
+		if (!locker)
 			goto again;
 
-		ret = find_watcher(rbd_dev, lockers);
+		ret = find_watcher(rbd_dev, locker);
 		if (ret)
 			goto out; /* request lock or error */
 
 		rbd_warn(rbd_dev, "breaking header lock owned by %s%llu",
-			 ENTITY_NAME(lockers[0].id.name));
+			 ENTITY_NAME(locker->id.name));
 
 		ret = ceph_monc_blocklist_add(&client->monc,
-					      &lockers[0].info.addr);
+					      &locker->info.addr);
 		if (ret) {
-			rbd_warn(rbd_dev, "blocklist of %s%llu failed: %d",
-				 ENTITY_NAME(lockers[0].id.name), ret);
+			rbd_warn(rbd_dev, "failed to blocklist %s%llu: %d",
+				 ENTITY_NAME(locker->id.name), ret);
 			goto out;
 		}
 
 		ret = ceph_cls_break_lock(&client->osdc, &rbd_dev->header_oid,
 					  &rbd_dev->header_oloc, RBD_LOCK_NAME,
-					  lockers[0].id.cookie,
-					  &lockers[0].id.name);
-		if (ret && ret != -ENOENT)
+					  locker->id.cookie, &locker->id.name);
+		if (ret && ret != -ENOENT) {
+			rbd_warn(rbd_dev, "failed to break header lock: %d",
+				 ret);
 			goto out;
+		}
 
 again:
-		ceph_free_lockers(lockers, num_lockers);
+		free_locker(locker);
 	}
 
 out:
-	ceph_free_lockers(lockers, num_lockers);
+	free_locker(locker);
 	return ret;
 }
 

[PATCH 6.1 215/228] rbd: harden get_lock_owner_info() a bit

[Greg Kroah-Hartman]

From: Ilya Dryomov <idryomov@gmail.com>

commit 8ff2c64c9765446c3cef804fb99da04916603e27 upstream.

- we want the exclusive lock type, so test for it directly
- use sscanf() to actually parse the lock cookie and avoid admitting
  invalid handles
- bail if locker has a blank address

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/rbd.c  |   21 +++++++++++++++------
 net/ceph/messenger.c |    1 +
 2 files changed, 16 insertions(+), 6 deletions(-)

--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -3863,10 +3863,9 @@ static struct ceph_locker *get_lock_owne
 	u32 num_lockers;
 	u8 lock_type;
 	char *lock_tag;
+	u64 handle;
 	int ret;
 
-	dout("%s rbd_dev %p\n", __func__, rbd_dev);
-
 	ret = ceph_cls_lock_info(osdc, &rbd_dev->header_oid,
 				 &rbd_dev->header_oloc, RBD_LOCK_NAME,
 				 &lock_type, &lock_tag, &lockers, &num_lockers);
@@ -3887,18 +3886,28 @@ static struct ceph_locker *get_lock_owne
 		goto err_busy;
 	}
 
-	if (lock_type == CEPH_CLS_LOCK_SHARED) {
-		rbd_warn(rbd_dev, "shared lock type detected");
+	if (lock_type != CEPH_CLS_LOCK_EXCLUSIVE) {
+		rbd_warn(rbd_dev, "incompatible lock type detected");
 		goto err_busy;
 	}
 
 	WARN_ON(num_lockers != 1);
-	if (strncmp(lockers[0].id.cookie, RBD_LOCK_COOKIE_PREFIX,
-		    strlen(RBD_LOCK_COOKIE_PREFIX))) {
+	ret = sscanf(lockers[0].id.cookie, RBD_LOCK_COOKIE_PREFIX " %llu",
+		     &handle);
+	if (ret != 1) {
 		rbd_warn(rbd_dev, "locked by external mechanism, cookie %s",
 			 lockers[0].id.cookie);
 		goto err_busy;
 	}
+	if (ceph_addr_is_blank(&lockers[0].info.addr)) {
+		rbd_warn(rbd_dev, "locker has a blank address");
+		goto err_busy;
+	}
+
+	dout("%s rbd_dev %p got locker %s%llu@%pISpc/%u handle %llu\n",
+	     __func__, rbd_dev, ENTITY_NAME(lockers[0].id.name),
+	     &lockers[0].info.addr.in_addr,
+	     le32_to_cpu(lockers[0].info.addr.nonce), handle);
 
 out:
 	kfree(lock_tag);
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -1118,6 +1118,7 @@ bool ceph_addr_is_blank(const struct cep
 		return true;
 	}
 }
+EXPORT_SYMBOL(ceph_addr_is_blank);
 
 int ceph_addr_port(const struct ceph_entity_addr *addr)
 {

[PATCH 6.1 216/228] rbd: retrieve and check lock owner twice before blocklisting

[Greg Kroah-Hartman]

From: Ilya Dryomov <idryomov@gmail.com>

commit 588159009d5b7a09c3e5904cffddbe4a4e170301 upstream.

An attempt to acquire exclusive lock can race with the current lock
owner closing the image:

1. lock is held by client123, rbd_lock() returns -EBUSY
2. get_lock_owner_info() returns client123 instance details
3. client123 closes the image, lock is released
4. find_watcher() returns 0 as there is no matching watcher anymore
5. client123 instance gets erroneously blocklisted

Particularly impacted is mirror snapshot scheduler in snapshot-based
mirroring since it happens to open and close images a lot (images are
opened only for as long as it takes to take the next mirror snapshot,
the same client instance is used for all images).

To reduce the potential for erroneous blocklisting, retrieve the lock
owner again after find_watcher() returns 0.  If it's still there, make
sure it matches the previously detected lock owner.

Cc: stable@vger.kernel.org # f38cb9d9c204: rbd: make get_lock_owner_info() return a single locker or NULL
Cc: stable@vger.kernel.org # 8ff2c64c9765: rbd: harden get_lock_owner_info() a bit
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/rbd.c |   25 +++++++++++++++++++++++--
 1 file changed, 23 insertions(+), 2 deletions(-)

--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -3850,6 +3850,15 @@ static void wake_lock_waiters(struct rbd
 	list_splice_tail_init(&rbd_dev->acquiring_list, &rbd_dev->running_list);
 }
 
+static bool locker_equal(const struct ceph_locker *lhs,
+			 const struct ceph_locker *rhs)
+{
+	return lhs->id.name.type == rhs->id.name.type &&
+	       lhs->id.name.num == rhs->id.name.num &&
+	       !strcmp(lhs->id.cookie, rhs->id.cookie) &&
+	       ceph_addr_equal_no_type(&lhs->info.addr, &rhs->info.addr);
+}
+
 static void free_locker(struct ceph_locker *locker)
 {
 	if (locker)
@@ -3970,11 +3979,11 @@ out:
 static int rbd_try_lock(struct rbd_device *rbd_dev)
 {
 	struct ceph_client *client = rbd_dev->rbd_client->client;
-	struct ceph_locker *locker;
+	struct ceph_locker *locker, *refreshed_locker;
 	int ret;
 
 	for (;;) {
-		locker = NULL;
+		locker = refreshed_locker = NULL;
 
 		ret = rbd_lock(rbd_dev);
 		if (ret != -EBUSY)
@@ -3994,6 +4003,16 @@ static int rbd_try_lock(struct rbd_devic
 		if (ret)
 			goto out; /* request lock or error */
 
+		refreshed_locker = get_lock_owner_info(rbd_dev);
+		if (IS_ERR(refreshed_locker)) {
+			ret = PTR_ERR(refreshed_locker);
+			refreshed_locker = NULL;
+			goto out;
+		}
+		if (!refreshed_locker ||
+		    !locker_equal(locker, refreshed_locker))
+			goto again;
+
 		rbd_warn(rbd_dev, "breaking header lock owned by %s%llu",
 			 ENTITY_NAME(locker->id.name));
 
@@ -4015,10 +4034,12 @@ static int rbd_try_lock(struct rbd_devic
 		}
 
 again:
+		free_locker(refreshed_locker);
 		free_locker(locker);
 	}
 
 out:
+	free_locker(refreshed_locker);
 	free_locker(locker);
 	return ret;
 }

[PATCH 6.1 217/228] drm/amd/display: set per pipe dppclk to 0 when dpp is off

[Greg Kroah-Hartman]

From: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>

commit 6609141c49df1b86fbad26a8643d4b4044f28b11 upstream.

The 'commit 52e4fdf09ebc ("drm/amd/display: use low clocks for no plane
configs")' introduced a change that set low clock values for DCN31 and
DCN32. As a result of these changes, DC started to spam the log with the
following warning:

------------[ cut here ]------------
WARNING: CPU: 8 PID: 1486 at
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_dccg.c:58
dccg2_update_dpp_dto+0x3f/0xf0 [amdgpu]
[..]
CPU: 8 PID: 1486 Comm: kms_atomic Tainted: G W 5.18.0+ #1
RIP: 0010:dccg2_update_dpp_dto+0x3f/0xf0 [amdgpu]
RSP: 0018:ffffbbd8025334d0 EFLAGS: 00010206
RAX: 00000000000001ee RBX: ffffa02c87dd3de0 RCX: 00000000000a7f80
RDX: 000000000007dec3 RSI: 0000000000000000 RDI: ffffa02c87dd3de0
RBP: ffffbbd8025334e8 R08: 0000000000000001 R09: 0000000000000005
R10: 00000000000331a0 R11: ffffffffc0b03d80 R12: ffffa02ca576d000
R13: ffffa02cd02c0000 R14: 00000000001453bc R15: ffffa02cdc280000
[..]
dcn20_update_clocks_update_dpp_dto+0x4e/0xa0 [amdgpu]
dcn32_update_clocks+0x5d9/0x650 [amdgpu]
dcn20_prepare_bandwidth+0x49/0x100 [amdgpu]
dcn30_prepare_bandwidth+0x63/0x80 [amdgpu]
dc_commit_state_no_check+0x39d/0x13e0 [amdgpu]
dc_commit_streams+0x1f9/0x3b0 [amdgpu]
dc_commit_state+0x37/0x120 [amdgpu]
amdgpu_dm_atomic_commit_tail+0x5e5/0x2520 [amdgpu]
? _raw_spin_unlock_irqrestore+0x1f/0x40
? down_trylock+0x2c/0x40
? vprintk_emit+0x186/0x2c0
? vprintk_default+0x1d/0x20
? vprintk+0x4e/0x60

We can easily trigger this issue by using a 4k@120 or a 2k@165 and
running some of the kms_atomic tests. This warning is triggered because
the per-pipe clock update is not happening; this commit fixes this issue
by ensuring that DPPCLK is updated when calculating the watermark and
dlg is invoked.

Fixes: 2641c7b78081 ("drm/amd/display: use low clocks for no plane configs")
Reported-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c |    3 +++
 drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c |    5 ++++-
 2 files changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c
@@ -559,6 +559,9 @@ void dcn31_calculate_wm_and_dlg_fp(
 		context->bw_ctx.bw.dcn.clk.dramclk_khz = 0;
 		context->bw_ctx.bw.dcn.clk.fclk_khz = 0;
 		context->bw_ctx.bw.dcn.clk.p_state_change_support = true;
+		for (i = 0; i < dc->res_pool->pipe_count; i++)
+			if (context->res_ctx.pipe_ctx[i].stream)
+				context->res_ctx.pipe_ctx[i].plane_res.bw.dppclk_khz = 0;
 	}
 	for (i = 0, pipe_idx = 0; i < dc->res_pool->pipe_count; i++) {
 		if (!context->res_ctx.pipe_ctx[i].stream)
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
@@ -1305,7 +1305,10 @@ static void dcn32_calculate_dlg_params(s
 
 		if (context->bw_ctx.bw.dcn.clk.dppclk_khz < pipes[pipe_idx].clks_cfg.dppclk_mhz * 1000)
 			context->bw_ctx.bw.dcn.clk.dppclk_khz = pipes[pipe_idx].clks_cfg.dppclk_mhz * 1000;
-		context->res_ctx.pipe_ctx[i].plane_res.bw.dppclk_khz = pipes[pipe_idx].clks_cfg.dppclk_mhz * 1000;
+		if (context->res_ctx.pipe_ctx[i].plane_state)
+			context->res_ctx.pipe_ctx[i].plane_res.bw.dppclk_khz = pipes[pipe_idx].clks_cfg.dppclk_mhz * 1000;
+		else
+			context->res_ctx.pipe_ctx[i].plane_res.bw.dppclk_khz = 0;
 		context->res_ctx.pipe_ctx[i].pipe_dlg_param = pipes[pipe_idx].pipe.dest;
 		pipe_idx++;
 	}

[PATCH 6.1 218/228] tracing: Fix trace_event_raw_event_synth() if else statement

[Greg Kroah-Hartman]

From: Steven Rostedt (Google) <rostedt@goodmis.org>

commit 9971c3f944489ff7aacb9d25e0cde841a5f6018a upstream.

The test to check if the field is a stack is to be done if it is not a
string. But the code had:

    } if (event->fields[i]->is_stack) {

and not

   } else if (event->fields[i]->is_stack) {

which would cause it to always be tested. Worse yet, this also included an
"else" statement that was only to be called if the field was not a string
and a stack, but this code allows it to be called if it was a string (and
not a stack).

Also fixed some whitespace issues.

Link: https://lore.kernel.org/all/202301302110.mEtNwkBD-lkp@intel.com/
Link: https://lore.kernel.org/linux-trace-kernel/20230131095237.63e3ca8d@gandalf.local.home

Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 00cf3d672a9d ("tracing: Allow synthetic events to pass around stacktraces")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/trace/trace_events_synth.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/kernel/trace/trace_events_synth.c
+++ b/kernel/trace/trace_events_synth.c
@@ -576,8 +576,8 @@ static notrace void trace_event_raw_even
 					   event->fields[i]->is_dynamic,
 					   data_size, &n_u64);
 			data_size += len; /* only dynamic string increments */
-		} if (event->fields[i]->is_stack) {
-		        long *stack = (long *)(long)var_ref_vals[val_idx];
+		} else if (event->fields[i]->is_stack) {
+			long *stack = (long *)(long)var_ref_vals[val_idx];
 
 			len = trace_stack(entry, event, stack,
 					   data_size, &n_u64);

[PATCH 6.1 219/228] drm/amd/display: perform a bounds check before filling dirty rectangles

[Greg Kroah-Hartman]

From: Hamza Mahfooz <hamza.mahfooz@amd.com>

commit af22d6a869cc26b519bfdcd54293c53f2e491870 upstream.

Currently, it is possible for us to access memory that we shouldn't.
Since, we acquire (possibly dangling) pointers to dirty rectangles
before doing a bounds check to make sure we can actually accommodate the
number of dirty rectangles userspace has requested to fill. This issue
is especially evident if a compositor requests both MPO and damage clips
at the same time, in which case I have observed a soft-hang. So, to
avoid this issue, perform the bounds check before filling a single dirty
rectangle and WARN() about it, if it is ever attempted in
fill_dc_dirty_rect().

Cc: stable@vger.kernel.org # 6.1+
Fixes: 30ebe41582d1 ("drm/amd/display: add FB_DAMAGE_CLIPS support")
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |   13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -4953,11 +4953,7 @@ static inline void fill_dc_dirty_rect(st
 				      int32_t y, int32_t width, int32_t height,
 				      int *i, bool ffu)
 {
-	if (*i > DC_MAX_DIRTY_RECTS)
-		return;
-
-	if (*i == DC_MAX_DIRTY_RECTS)
-		goto out;
+	WARN_ON(*i >= DC_MAX_DIRTY_RECTS);
 
 	dirty_rect->x = x;
 	dirty_rect->y = y;
@@ -4973,7 +4969,6 @@ static inline void fill_dc_dirty_rect(st
 			"[PLANE:%d] PSR SU dirty rect at (%d, %d) size (%d, %d)",
 			plane->base.id, x, y, width, height);
 
-out:
 	(*i)++;
 }
 
@@ -5055,6 +5050,9 @@ static void fill_dc_dirty_rects(struct d
 		new_plane_state->plane->base.id,
 		bb_changed, fb_changed, num_clips);
 
+	if ((num_clips + (bb_changed ? 2 : 0)) > DC_MAX_DIRTY_RECTS)
+		goto ffu;
+
 	if (bb_changed) {
 		fill_dc_dirty_rect(new_plane_state->plane, &dirty_rects[i],
 				   new_plane_state->crtc_x,
@@ -5084,9 +5082,6 @@ static void fill_dc_dirty_rects(struct d
 				   new_plane_state->crtc_h, &i, false);
 	}
 
-	if (i > DC_MAX_DIRTY_RECTS)
-		goto ffu;
-
 	flip_addrs->dirty_rect_count = i;
 	return;
 

[PATCH 6.1 220/228] drm/amd/display: Write to correct dirty_rect

[Greg Kroah-Hartman]

From: Benjamin Cheng <ben@bcheng.me>

commit 751281c55579f0cb0e56c9797d4663f689909681 upstream.

When FB_DAMAGE_CLIPS are provided in a non-MPO scenario, the loop does
not use the counter i. This causes the fill_dc_dity_rect() to always
fill dirty_rects[0], causing graphical artifacts when a damage clip
aware DRM client sends more than 1 damage clip.

Instead, use the flip_addrs->dirty_rect_count which is incremented by
fill_dc_dirty_rect() on a successful fill.

Fixes: 30ebe41582d1 ("drm/amd/display: add FB_DAMAGE_CLIPS support")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2453
Signed-off-by: Benjamin Cheng <ben@bcheng.me>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -5023,9 +5023,9 @@ static void fill_dc_dirty_rects(struct d
 
 		for (; flip_addrs->dirty_rect_count < num_clips; clips++)
 			fill_dc_dirty_rect(new_plane_state->plane,
-					   &dirty_rects[i], clips->x1,
-					   clips->y1, clips->x2 - clips->x1,
-					   clips->y2 - clips->y1,
+					   &dirty_rects[flip_addrs->dirty_rect_count],
+					   clips->x1, clips->y1,
+					   clips->x2 - clips->x1, clips->y2 - clips->y1,
 					   &flip_addrs->dirty_rect_count,
 					   false);
 		return;

[PATCH 6.1 221/228] ACPI: processor: perflib: Use the "no limit" frequency QoS

[Greg Kroah-Hartman]

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

commit c02d5feb6e2f60affc6ba8606d8d614c071e2ba6 upstream.

When _PPC returns 0, it means that the CPU frequency is not limited by
the platform firmware, so make acpi_processor_get_platform_limit()
update the frequency QoS request used by it to "no limit" in that case.

This addresses a problem with limiting CPU frequency artificially on
some systems after CPU offline/online to the frequency that corresponds
to the first entry in the _PSS return package.

Reported-by: Pratyush Yadav <ptyadav@amazon.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Pratyush Yadav <ptyadav@amazon.de>
Tested-by: Pratyush Yadav <ptyadav@amazon.de>
Tested-by: Hagar Hemdan <hagarhem@amazon.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/processor_perflib.c |   20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -53,6 +53,8 @@ static int acpi_processor_get_platform_l
 {
 	acpi_status status = 0;
 	unsigned long long ppc = 0;
+	s32 qos_value;
+	int index;
 	int ret;
 
 	if (!pr)
@@ -72,17 +74,27 @@ static int acpi_processor_get_platform_l
 		}
 	}
 
+	index = ppc;
+
 	pr_debug("CPU %d: _PPC is %d - frequency %s limited\n", pr->id,
-		       (int)ppc, ppc ? "" : "not");
+		 index, index ? "is" : "is not");
 
-	pr->performance_platform_limit = (int)ppc;
+	pr->performance_platform_limit = index;
 
 	if (ppc >= pr->performance->state_count ||
 	    unlikely(!freq_qos_request_active(&pr->perflib_req)))
 		return 0;
 
-	ret = freq_qos_update_request(&pr->perflib_req,
-			pr->performance->states[ppc].core_frequency * 1000);
+	/*
+	 * If _PPC returns 0, it means that all of the available states can be
+	 * used ("no limit").
+	 */
+	if (index == 0)
+		qos_value = FREQ_QOS_MAX_DEFAULT_VALUE;
+	else
+		qos_value = pr->performance->states[index].core_frequency * 1000;
+
+	ret = freq_qos_update_request(&pr->perflib_req, qos_value);
 	if (ret < 0) {
 		pr_warn("Failed to update perflib freq constraint: CPU%d (%d)\n",
 			pr->id, ret);

[PATCH 6.1 222/228] ACPI: processor: perflib: Avoid updating frequency QoS unnecessarily

[Greg Kroah-Hartman]

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

commit 99387b016022c29234c4ebf9abd34358c6e56532 upstream.

Modify acpi_processor_get_platform_limit() to avoid updating its
frequency QoS request when the _PPC return value has not changed
by comparing that value to the previous _PPC return value stored in
the performance_platform_limit field of the struct acpi_processor
corresponding to the given CPU.

While at it, do the _PPC return value check against the state count
earlier, to avoid setting performance_platform_limit to an invalid
value, and make acpi_processor_ppc_init() use FREQ_QOS_MAX_DEFAULT_VALUE
as the "no limit" frequency QoS for consistency.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Hagar Hemdan <hagarhem@amazon.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/processor_perflib.c |   18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -76,13 +76,16 @@ static int acpi_processor_get_platform_l
 
 	index = ppc;
 
+	if (pr->performance_platform_limit == index ||
+	    ppc >= pr->performance->state_count)
+		return 0;
+
 	pr_debug("CPU %d: _PPC is %d - frequency %s limited\n", pr->id,
 		 index, index ? "is" : "is not");
 
 	pr->performance_platform_limit = index;
 
-	if (ppc >= pr->performance->state_count ||
-	    unlikely(!freq_qos_request_active(&pr->perflib_req)))
+	if (unlikely(!freq_qos_request_active(&pr->perflib_req)))
 		return 0;
 
 	/*
@@ -177,9 +180,16 @@ void acpi_processor_ppc_init(struct cpuf
 		if (!pr)
 			continue;
 
+		/*
+		 * Reset performance_platform_limit in case there is a stale
+		 * value in it, so as to make it match the "no limit" QoS value
+		 * below.
+		 */
+		pr->performance_platform_limit = 0;
+
 		ret = freq_qos_add_request(&policy->constraints,
-					   &pr->perflib_req,
-					   FREQ_QOS_MAX, INT_MAX);
+					   &pr->perflib_req, FREQ_QOS_MAX,
+					   FREQ_QOS_MAX_DEFAULT_VALUE);
 		if (ret < 0)
 			pr_err("Failed to add freq constraint for CPU%d (%d)\n",
 			       cpu, ret);

[PATCH 6.1 223/228] cpufreq: intel_pstate: Drop ACPI _PSS states table patching

[Greg Kroah-Hartman]

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

commit e8a0e30b742f76ebd0f3b196973df4bf65d8fbbb upstream.

After making acpi_processor_get_platform_limit() use the "no limit"
value for its frequency QoS request when _PPC returns 0, it is not
necessary to replace the frequency corresponding to the first _PSS
return package entry with the maximum turbo frequency of the given
CPU in intel_pstate_init_acpi_perf_limits() any more, so drop the
code doing that along with the comment explaining it.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Hagar Hemdan <hagarhem@amazon.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/cpufreq/intel_pstate.c |   14 --------------
 1 file changed, 14 deletions(-)

--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -451,20 +451,6 @@ static void intel_pstate_init_acpi_perf_
 			 (u32) cpu->acpi_perf_data.states[i].control);
 	}
 
-	/*
-	 * The _PSS table doesn't contain whole turbo frequency range.
-	 * This just contains +1 MHZ above the max non turbo frequency,
-	 * with control value corresponding to max turbo ratio. But
-	 * when cpufreq set policy is called, it will call with this
-	 * max frequency, which will cause a reduced performance as
-	 * this driver uses real max turbo frequency as the max
-	 * frequency. So correct this frequency in _PSS table to
-	 * correct max turbo frequency based on the turbo state.
-	 * Also need to convert to MHz as _PSS freq is in MHz.
-	 */
-	if (!global.turbo_disabled)
-		cpu->acpi_perf_data.states[0].core_frequency =
-					policy->cpuinfo.max_freq / 1000;
 	cpu->valid_pss_table = true;
 	pr_debug("_PPC limits will be enforced\n");
 

[PATCH 6.1 224/228] mptcp: ensure subflow is unhashed before cleaning the backlog

[Greg Kroah-Hartman]

From: Paolo Abeni <pabeni@redhat.com>

commit 3fffa15bfef48b0ad6424779c03e68ae8ace5acb upstream.

While tacking care of the mptcp-level listener I unintentionally
moved the subflow level unhash after the subflow listener backlog
cleanup.

That could cause some nasty race and makes the code harder to read.

Address the issue restoring the proper order of operations.

Fixes: 57fc0f1ceaa4 ("mptcp: ensure listener is unhashed before updating the sk status")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mptcp/protocol.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/mptcp/protocol.c
+++ b/net/mptcp/protocol.c
@@ -2945,9 +2945,9 @@ static void mptcp_check_listen_stop(stru
 		return;
 
 	lock_sock_nested(ssk, SINGLE_DEPTH_NESTING);
+	tcp_set_state(ssk, TCP_CLOSE);
 	mptcp_subflow_queue_clean(sk, ssk);
 	inet_csk_listen_stop(ssk);
-	tcp_set_state(ssk, TCP_CLOSE);
 	release_sock(ssk);
 }
 

[PATCH 6.1 225/228] selftests: mptcp: sockopt: use iptables-legacy if available

[Greg Kroah-Hartman]

From: Matthieu Baerts <matthieu.baerts@tessares.net>

commit a5a5990c099dd354e05e89ee77cd2dbf6655d4a1 upstream.

IPTables commands using 'iptables-nft' fail on old kernels, at least
on v5.15 because it doesn't see the default IPTables chains:

  $ iptables -L
  iptables/1.8.2 Failed to initialize nft: Protocol not supported

As a first step before switching to NFTables, we can use iptables-legacy
if available.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: dc65fe82fb07 ("selftests: mptcp: add packet mark test case")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/net/mptcp/mptcp_sockopt.sh |   24 +++++++++++----------
 1 file changed, 13 insertions(+), 11 deletions(-)

--- a/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh
@@ -13,13 +13,15 @@ timeout_poll=30
 timeout_test=$((timeout_poll * 2 + 1))
 mptcp_connect=""
 do_all_tests=1
+iptables="iptables"
+ip6tables="ip6tables"
 
 add_mark_rules()
 {
 	local ns=$1
 	local m=$2
 
-	for t in iptables ip6tables; do
+	for t in ${iptables} ${ip6tables}; do
 		# just to debug: check we have multiple subflows connection requests
 		ip netns exec $ns $t -A OUTPUT -p tcp --syn -m mark --mark $m -j ACCEPT
 
@@ -92,14 +94,14 @@ if [ $? -ne 0 ];then
 	exit $ksft_skip
 fi
 
-iptables -V > /dev/null 2>&1
-if [ $? -ne 0 ];then
+# Use the legacy version if available to support old kernel versions
+if iptables-legacy -V &> /dev/null; then
+	iptables="iptables-legacy"
+	ip6tables="ip6tables-legacy"
+elif ! iptables -V &> /dev/null; then
 	echo "SKIP: Could not run all tests without iptables tool"
 	exit $ksft_skip
-fi
-
-ip6tables -V > /dev/null 2>&1
-if [ $? -ne 0 ];then
+elif ! ip6tables -V &> /dev/null; then
 	echo "SKIP: Could not run all tests without ip6tables tool"
 	exit $ksft_skip
 fi
@@ -109,10 +111,10 @@ check_mark()
 	local ns=$1
 	local af=$2
 
-	tables=iptables
+	tables=${iptables}
 
 	if [ $af -eq 6 ];then
-		tables=ip6tables
+		tables=${ip6tables}
 	fi
 
 	counters=$(ip netns exec $ns $tables -v -L OUTPUT | grep DROP)
@@ -314,8 +316,8 @@ do_tcpinq_tests()
 {
 	local lret=0
 
-	ip netns exec "$ns1" iptables -F
-	ip netns exec "$ns1" ip6tables -F
+	ip netns exec "$ns1" ${iptables} -F
+	ip netns exec "$ns1" ${ip6tables} -F
 
 	if ! mptcp_lib_kallsyms_has "mptcp_ioctl$"; then
 		echo "INFO: TCP_INQ not supported: SKIP"

[PATCH 6.1 226/228] test_firmware: return ENOMEM instead of ENOSPC on failed memory allocation

[Greg Kroah-Hartman]

From: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>

commit 7dae593cd226a0bca61201cf85ceb9335cf63682 upstream.

In a couple of situations like

	name = kstrndup(buf, count, GFP_KERNEL);
	if (!name)
		return -ENOSPC;

the error is not actually "No space left on device", but "Out of memory".

It is semantically correct to return -ENOMEM in all failed kstrndup()
and kzalloc() cases in this driver, as it is not a problem with disk
space, but with kernel memory allocator failing allocation.

The semantically correct should be:

        name = kstrndup(buf, count, GFP_KERNEL);
        if (!name)
                return -ENOMEM;

Cc: Dan Carpenter <error27@gmail.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Luis R. Rodriguez" <mcgrof@ruslug.rutgers.edu>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Brian Norris <briannorris@chromium.org>
Fixes: c92316bf8e948 ("test_firmware: add batched firmware tests")
Fixes: 0a8adf584759c ("test: add firmware_class loader test")
Fixes: 548193cba2a7d ("test_firmware: add support for firmware_request_platform")
Fixes: eb910947c82f9 ("test: firmware_class: add asynchronous request trigger")
Fixes: 061132d2b9c95 ("test_firmware: add test custom fallback trigger")
Fixes: 7feebfa487b92 ("test_firmware: add support for request_firmware_into_buf")
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <20230606070808.9300-1-mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 lib/test_firmware.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/lib/test_firmware.c
+++ b/lib/test_firmware.c
@@ -214,7 +214,7 @@ static int __kstrncpy(char **dst, const
 {
 	*dst = kstrndup(name, count, gfp);
 	if (!*dst)
-		return -ENOSPC;
+		return -ENOMEM;
 	return count;
 }
 
@@ -671,7 +671,7 @@ static ssize_t trigger_request_store(str
 
 	name = kstrndup(buf, count, GFP_KERNEL);
 	if (!name)
-		return -ENOSPC;
+		return -ENOMEM;
 
 	pr_info("loading '%s'\n", name);
 
@@ -719,7 +719,7 @@ static ssize_t trigger_request_platform_
 
 	name = kstrndup(buf, count, GFP_KERNEL);
 	if (!name)
-		return -ENOSPC;
+		return -ENOMEM;
 
 	pr_info("inserting test platform fw '%s'\n", name);
 	efi_embedded_fw.name = name;
@@ -772,7 +772,7 @@ static ssize_t trigger_async_request_sto
 
 	name = kstrndup(buf, count, GFP_KERNEL);
 	if (!name)
-		return -ENOSPC;
+		return -ENOMEM;
 
 	pr_info("loading '%s'\n", name);
 
@@ -817,7 +817,7 @@ static ssize_t trigger_custom_fallback_s
 
 	name = kstrndup(buf, count, GFP_KERNEL);
 	if (!name)
-		return -ENOSPC;
+		return -ENOMEM;
 
 	pr_info("loading '%s' using custom fallback mechanism\n", name);
 
@@ -868,7 +868,7 @@ static int test_fw_run_batch_request(voi
 
 		test_buf = kzalloc(TEST_FIRMWARE_BUF_SIZE, GFP_KERNEL);
 		if (!test_buf)
-			return -ENOSPC;
+			return -ENOMEM;
 
 		if (test_fw_config->partial)
 			req->rc = request_partial_firmware_into_buf

[PATCH 6.1 227/228] dma-buf: keep the signaling time of merged fences v3

[Greg Kroah-Hartman]

From: Christian König <christian.koenig@amd.com>

commit f781f661e8c99b0cb34129f2e374234d61864e77 upstream.

Some Android CTS is testing if the signaling time keeps consistent
during merges.

v2: use the current time if the fence is still in the signaling path and
the timestamp not yet available.
v3: improve comment, fix one more case to use the correct timestamp

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230630120041.109216-1-christian.koenig@amd.com
Cc: Jindong Yue <jindong.yue@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/dma-buf/dma-fence-unwrap.c |   26 ++++++++++++++++++++++----
 drivers/dma-buf/dma-fence.c        |    5 +++--
 drivers/gpu/drm/drm_syncobj.c      |    2 +-
 include/linux/dma-fence.h          |    2 +-
 4 files changed, 27 insertions(+), 8 deletions(-)

--- a/drivers/dma-buf/dma-fence-unwrap.c
+++ b/drivers/dma-buf/dma-fence-unwrap.c
@@ -66,18 +66,36 @@ struct dma_fence *__dma_fence_unwrap_mer
 {
 	struct dma_fence_array *result;
 	struct dma_fence *tmp, **array;
+	ktime_t timestamp;
 	unsigned int i;
 	size_t count;
 
 	count = 0;
+	timestamp = ns_to_ktime(0);
 	for (i = 0; i < num_fences; ++i) {
-		dma_fence_unwrap_for_each(tmp, &iter[i], fences[i])
-			if (!dma_fence_is_signaled(tmp))
+		dma_fence_unwrap_for_each(tmp, &iter[i], fences[i]) {
+			if (!dma_fence_is_signaled(tmp)) {
 				++count;
+			} else if (test_bit(DMA_FENCE_FLAG_TIMESTAMP_BIT,
+					    &tmp->flags)) {
+				if (ktime_after(tmp->timestamp, timestamp))
+					timestamp = tmp->timestamp;
+			} else {
+				/*
+				 * Use the current time if the fence is
+				 * currently signaling.
+				 */
+				timestamp = ktime_get();
+			}
+		}
 	}
 
+	/*
+	 * If we couldn't find a pending fence just return a private signaled
+	 * fence with the timestamp of the last signaled one.
+	 */
 	if (count == 0)
-		return dma_fence_get_stub();
+		return dma_fence_allocate_private_stub(timestamp);
 
 	array = kmalloc_array(count, sizeof(*array), GFP_KERNEL);
 	if (!array)
@@ -138,7 +156,7 @@ restart:
 	} while (tmp);
 
 	if (count == 0) {
-		tmp = dma_fence_get_stub();
+		tmp = dma_fence_allocate_private_stub(ktime_get());
 		goto return_tmp;
 	}
 
--- a/drivers/dma-buf/dma-fence.c
+++ b/drivers/dma-buf/dma-fence.c
@@ -150,10 +150,11 @@ EXPORT_SYMBOL(dma_fence_get_stub);
 
 /**
  * dma_fence_allocate_private_stub - return a private, signaled fence
+ * @timestamp: timestamp when the fence was signaled
  *
  * Return a newly allocated and signaled stub fence.
  */
-struct dma_fence *dma_fence_allocate_private_stub(void)
+struct dma_fence *dma_fence_allocate_private_stub(ktime_t timestamp)
 {
 	struct dma_fence *fence;
 
@@ -169,7 +170,7 @@ struct dma_fence *dma_fence_allocate_pri
 	set_bit(DMA_FENCE_FLAG_ENABLE_SIGNAL_BIT,
 		&fence->flags);
 
-	dma_fence_signal(fence);
+	dma_fence_signal_timestamp(fence, timestamp);
 
 	return fence;
 }
--- a/drivers/gpu/drm/drm_syncobj.c
+++ b/drivers/gpu/drm/drm_syncobj.c
@@ -353,7 +353,7 @@ EXPORT_SYMBOL(drm_syncobj_replace_fence)
  */
 static int drm_syncobj_assign_null_handle(struct drm_syncobj *syncobj)
 {
-	struct dma_fence *fence = dma_fence_allocate_private_stub();
+	struct dma_fence *fence = dma_fence_allocate_private_stub(ktime_get());
 
 	if (IS_ERR(fence))
 		return PTR_ERR(fence);
--- a/include/linux/dma-fence.h
+++ b/include/linux/dma-fence.h
@@ -584,7 +584,7 @@ static inline signed long dma_fence_wait
 }
 
 struct dma_fence *dma_fence_get_stub(void);
-struct dma_fence *dma_fence_allocate_private_stub(void);
+struct dma_fence *dma_fence_allocate_private_stub(ktime_t timestamp);
 u64 dma_fence_context_alloc(unsigned num);
 
 extern const struct dma_fence_ops dma_fence_array_ops;

[PATCH 6.1 228/228] dma-buf: fix an error pointer vs NULL bug

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@linaro.org>

commit 00ae1491f970acc454be0df63f50942d94825860 upstream.

Smatch detected potential error pointer dereference.

    drivers/gpu/drm/drm_syncobj.c:888 drm_syncobj_transfer_to_timeline()
    error: 'fence' dereferencing possible ERR_PTR()

The error pointer comes from dma_fence_allocate_private_stub().  One
caller expected error pointers and one expected NULL pointers.  Change
it to return NULL and update the caller which expected error pointers,
drm_syncobj_assign_null_handle(), to check for NULL instead.

Fixes: f781f661e8c9 ("dma-buf: keep the signaling time of merged fences v3")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/b09f1996-3838-4fa2-9193-832b68262e43@moroto.mountain
Cc: Jindong Yue <jindong.yue@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/dma-buf/dma-fence.c   |    2 +-
 drivers/gpu/drm/drm_syncobj.c |    4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/dma-buf/dma-fence.c
+++ b/drivers/dma-buf/dma-fence.c
@@ -160,7 +160,7 @@ struct dma_fence *dma_fence_allocate_pri
 
 	fence = kzalloc(sizeof(*fence), GFP_KERNEL);
 	if (fence == NULL)
-		return ERR_PTR(-ENOMEM);
+		return NULL;
 
 	dma_fence_init(fence,
 		       &dma_fence_stub_ops,
--- a/drivers/gpu/drm/drm_syncobj.c
+++ b/drivers/gpu/drm/drm_syncobj.c
@@ -355,8 +355,8 @@ static int drm_syncobj_assign_null_handl
 {
 	struct dma_fence *fence = dma_fence_allocate_private_stub(ktime_get());
 
-	if (IS_ERR(fence))
-		return PTR_ERR(fence);
+	if (!fence)
+		return -ENOMEM;
 
 	drm_syncobj_replace_fence(syncobj, fence);
 	dma_fence_put(fence);

Re: [PATCH 6.1 000/228] 6.1.43-rc1 review

[Takeshi Ogasawara]

Hi Greg

On Tue, Aug 1, 2023 at 6:32 PM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 6.1.43 release.
> There are 228 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 03 Aug 2023 09:18:38 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.43-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>

6.1.43-rc1 tested.

Build successfully completed.
Boot successfully completed.
No dmesg regressions.
Video output normal.
Sound output normal.

Lenovo ThinkPad X1 Carbon Gen10(Intel i7-1260P(x86_64) arch linux)

Thanks

Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>

Re: [PATCH 6.1 000/228] 6.1.43-rc1 review

[Jon Hunter]

On Tue, 01 Aug 2023 11:17:38 +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.43 release.
> There are 228 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 03 Aug 2023 09:18:38 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.43-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v6.1:
    11 builds:	11 pass, 0 fail
    28 boots:	28 pass, 0 fail
    130 tests:	130 pass, 0 fail

Linux version:	6.1.43-rc1-g9f9cafb14305
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 6.1 000/228] 6.1.43-rc1 review

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 371 bytes --]

On Tue, Aug 01, 2023 at 11:17:38AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.43 release.
> There are 228 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

Tested-by: Conor Dooley <conor.dooley@microchip.com>

Thanks,
Conor.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH 6.1 000/228] 6.1.43-rc1 review

[Florian Fainelli]

On 8/1/23 02:17, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.43 release.
> There are 228 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 03 Aug 2023 09:18:38 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.43-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on 
BMIPS_GENERIC:

Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian

Re: [PATCH 6.1 000/228] 6.1.43-rc1 review

[SeongJae Park]

Hello,

On Tue, 1 Aug 2023 11:17:38 +0200 Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:

> This is the start of the stable review cycle for the 6.1.43 release.
> There are 228 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 03 Aug 2023 09:18:38 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.43-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> and the diffstat can be found below.

This rc kernel passes DAMON functionality test[1] on my test machine.
Attaching the test results summary below.  Please note that I retrieved the
kernel from linux-stable-rc tree[2].

Tested-by: SeongJae Park <sj@kernel.org>

[1] https://github.com/awslabs/damon-tests/tree/next/corr
[2] b2c388dc2443 ("Linux 5.15.124-rc1")


Thanks,
SJ

[...]

---

ok 1 selftests: damon: debugfs_attrs.sh
ok 1 selftests: damon-tests: kunit.sh
ok 2 selftests: damon-tests: huge_count_read_write.sh
ok 3 selftests: damon-tests: buffer_overflow.sh
ok 4 selftests: damon-tests: rm_contexts.sh
ok 5 selftests: damon-tests: record_null_deref.sh
ok 6 selftests: damon-tests: dbgfs_target_ids_read_before_terminate_race.sh
ok 7 selftests: damon-tests: dbgfs_target_ids_pid_leak.sh
ok 8 selftests: damon-tests: damo_tests.sh
ok 9 selftests: damon-tests: masim-record.sh
ok 10 selftests: damon-tests: build_i386.sh
ok 11 selftests: damon-tests: build_m68k.sh
ok 12 selftests: damon-tests: build_arm64.sh
ok 13 selftests: damon-tests: build_i386_idle_flag.sh
ok 14 selftests: damon-tests: build_i386_highpte.sh
ok 15 selftests: damon-tests: build_nomemcg.sh

PASS

Re: [PATCH 6.1 000/228] 6.1.43-rc1 review

[Shuah Khan]

On 8/1/23 03:17, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.43 release.
> There are 228 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 03 Aug 2023 09:18:38 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.43-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 6.1 000/228] 6.1.43-rc1 review

[Naresh Kamboju]

On Tue, 1 Aug 2023 at 15:00, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 6.1.43 release.
> There are 228 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 03 Aug 2023 09:18:38 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.43-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Following patch caused build regression on stable-rc 6.1 and 5.15,

Regressions found on arm:

  - build/gcc-12-orion5x_defconfig
  - build/clang-nightly-orion5x_defconfig
  - build/gcc-8-orion5x_defconfig
  - build/clang-16-orion5x_defconfig

gpio: mvebu: Make use of devm_pwmchip_add
[ Upstream commit 1945063eb59e64d2919cb14d54d081476d9e53bb ]

Build log:
------
drivers/gpio/gpio-mvebu.c: In function 'mvebu_pwm_probe':
drivers/gpio/gpio-mvebu.c:877:16: error: implicit declaration of
function 'devm_pwmchip_add'; did you mean 'pwmchip_add'?
[-Werror=implicit-function-declaration]
  877 |         return devm_pwmchip_add(dev, &mvpwm->chip);
      |                ^~~~~~~~~~~~~~~~
      |                pwmchip_add
cc1: some warnings being treated as errors

Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 6.1 000/228] 6.1.43-rc1 review

[Uwe Kleine-König]

[-- Attachment #1: Type: text/plain, Size: 1295 bytes --]

On Wed, Aug 02, 2023 at 07:24:23AM +0530, Naresh Kamboju wrote:
> On Tue, 1 Aug 2023 at 15:00, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > This is the start of the stable review cycle for the 6.1.43 release.
> > There are 228 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Thu, 03 Aug 2023 09:18:38 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> >         https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.43-rc1.gz
> > or in the git tree and branch at:
> >         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> 
> Following patch caused build regression on stable-rc 6.1 and 5.15,

Looking at 6.1.x, cherry-picking
88da4e8113110d5f4ebdd2f8cd0899e300cd1954 can be done without conflicts
and fixes this regression.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 6.1 000/228] 6.1.43-rc1 review

[Greg Kroah-Hartman]

On Wed, Aug 02, 2023 at 10:22:26AM +0200, Uwe Kleine-König wrote:
> On Wed, Aug 02, 2023 at 07:24:23AM +0530, Naresh Kamboju wrote:
> > On Tue, 1 Aug 2023 at 15:00, Greg Kroah-Hartman
> > <gregkh@linuxfoundation.org> wrote:
> > >
> > > This is the start of the stable review cycle for the 6.1.43 release.
> > > There are 228 patches in this series, all will be posted as a response
> > > to this one.  If anyone has any issues with these being applied, please
> > > let me know.
> > >
> > > Responses should be made by Thu, 03 Aug 2023 09:18:38 +0000.
> > > Anything received after that time might be too late.
> > >
> > > The whole patch series can be found in one patch at:
> > >         https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.43-rc1.gz
> > > or in the git tree and branch at:
> > >         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> > > and the diffstat can be found below.
> > >
> > > thanks,
> > >
> > > greg k-h
> > 
> > Following patch caused build regression on stable-rc 6.1 and 5.15,
> 
> Looking at 6.1.x, cherry-picking
> 88da4e8113110d5f4ebdd2f8cd0899e300cd1954 can be done without conflicts
> and fixes this regression.

Already done and in -rc2!

thanks,

greg k-h

Re: [PATCH 6.1 000/228] 6.1.43-rc1 review

[Bagas Sanjaya]

[-- Attachment #1: Type: text/plain, Size: 559 bytes --]

On Tue, Aug 01, 2023 at 11:17:38AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.43 release.
> There are 228 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 

Successfully compiled and installed bindeb-pkgs on my computer (Acer
Aspire E15, Intel Core i3 Haswell). No noticeable regressions.

Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>

-- 
An old man doll... just what I always wanted! - Clara

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]