* FAILED: patch "[PATCH] iio: adc: ad7192: Fix ac excitation feature" failed to apply to 5.10-stable tree
@ 2023-08-12 16:34 gregkh
0 siblings, 0 replies; only message in thread
From: gregkh @ 2023-08-12 16:34 UTC (permalink / raw)
To: alisa.roman, Jonathan.Cameron, nuno.sa; +Cc: stable
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 6bc471b6c3aeaa7b95d1b86a1bb8d91a3c341fa5
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2023081237-turf-wok-df09@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 6bc471b6c3aeaa7b95d1b86a1bb8d91a3c341fa5 Mon Sep 17 00:00:00 2001
From: Alisa Roman <alisa.roman@analog.com>
Date: Wed, 14 Jun 2023 18:52:43 +0300
Subject: [PATCH] iio: adc: ad7192: Fix ac excitation feature
AC excitation enable feature exposed to user on AD7192, allowing a bit
which should be 0 to be set. This feature is specific only to AD7195. AC
excitation attribute moved accordingly.
In the AD7195 documentation, the AC excitation enable bit is on position
22 in the Configuration register. ACX macro changed to match correct
register and bit.
Note that the fix tag is for the commit that moved the driver out of
staging.
Fixes: b581f748cce0 ("staging: iio: adc: ad7192: move out of staging")
Signed-off-by: Alisa Roman <alisa.roman@analog.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20230614155242.160296-1-alisa.roman@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c
index 8685e0b58a83..7bc3ebfe8081 100644
--- a/drivers/iio/adc/ad7192.c
+++ b/drivers/iio/adc/ad7192.c
@@ -62,7 +62,6 @@
#define AD7192_MODE_STA_MASK BIT(20) /* Status Register transmission Mask */
#define AD7192_MODE_CLKSRC(x) (((x) & 0x3) << 18) /* Clock Source Select */
#define AD7192_MODE_SINC3 BIT(15) /* SINC3 Filter Select */
-#define AD7192_MODE_ACX BIT(14) /* AC excitation enable(AD7195 only)*/
#define AD7192_MODE_ENPAR BIT(13) /* Parity Enable */
#define AD7192_MODE_CLKDIV BIT(12) /* Clock divide by 2 (AD7190/2 only)*/
#define AD7192_MODE_SCYCLE BIT(11) /* Single cycle conversion */
@@ -91,6 +90,7 @@
/* Configuration Register Bit Designations (AD7192_REG_CONF) */
#define AD7192_CONF_CHOP BIT(23) /* CHOP enable */
+#define AD7192_CONF_ACX BIT(22) /* AC excitation enable(AD7195 only) */
#define AD7192_CONF_REFSEL BIT(20) /* REFIN1/REFIN2 Reference Select */
#define AD7192_CONF_CHAN(x) ((x) << 8) /* Channel select */
#define AD7192_CONF_CHAN_MASK (0x7FF << 8) /* Channel select mask */
@@ -472,7 +472,7 @@ static ssize_t ad7192_show_ac_excitation(struct device *dev,
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct ad7192_state *st = iio_priv(indio_dev);
- return sysfs_emit(buf, "%d\n", !!(st->mode & AD7192_MODE_ACX));
+ return sysfs_emit(buf, "%d\n", !!(st->conf & AD7192_CONF_ACX));
}
static ssize_t ad7192_show_bridge_switch(struct device *dev,
@@ -513,13 +513,13 @@ static ssize_t ad7192_set(struct device *dev,
ad_sd_write_reg(&st->sd, AD7192_REG_GPOCON, 1, st->gpocon);
break;
- case AD7192_REG_MODE:
+ case AD7192_REG_CONF:
if (val)
- st->mode |= AD7192_MODE_ACX;
+ st->conf |= AD7192_CONF_ACX;
else
- st->mode &= ~AD7192_MODE_ACX;
+ st->conf &= ~AD7192_CONF_ACX;
- ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
+ ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf);
break;
default:
ret = -EINVAL;
@@ -579,12 +579,11 @@ static IIO_DEVICE_ATTR(bridge_switch_en, 0644,
static IIO_DEVICE_ATTR(ac_excitation_en, 0644,
ad7192_show_ac_excitation, ad7192_set,
- AD7192_REG_MODE);
+ AD7192_REG_CONF);
static struct attribute *ad7192_attributes[] = {
&iio_dev_attr_filter_low_pass_3db_frequency_available.dev_attr.attr,
&iio_dev_attr_bridge_switch_en.dev_attr.attr,
- &iio_dev_attr_ac_excitation_en.dev_attr.attr,
NULL
};
@@ -595,6 +594,7 @@ static const struct attribute_group ad7192_attribute_group = {
static struct attribute *ad7195_attributes[] = {
&iio_dev_attr_filter_low_pass_3db_frequency_available.dev_attr.attr,
&iio_dev_attr_bridge_switch_en.dev_attr.attr,
+ &iio_dev_attr_ac_excitation_en.dev_attr.attr,
NULL
};
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2023-08-12 16:34 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-08-12 16:34 FAILED: patch "[PATCH] iio: adc: ad7192: Fix ac excitation feature" failed to apply to 5.10-stable tree gregkh
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).