From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: stable@vger.kernel.org,
"Dmitry Baryshkov" <dmitry.baryshkov@linaro.org>,
dri-devel@lists.freedesktop.org,
"Jouni Högander" <jouni.hogander@intel.com>
Subject: [CI 1/2] drm: Add an HPD poll helper to reschedule the poll work
Date: Tue, 22 Aug 2023 14:30:14 +0300 [thread overview]
Message-ID: <20230822113015.41224-1-imre.deak@intel.com> (raw)
Add a helper to reschedule drm_mode_config::output_poll_work after
polling has been enabled for a connector (and needing a reschedule,
since previously polling was disabled for all connectors and hence
output_poll_work was not running).
This is needed by the next patch fixing HPD polling on i915.
CC: stable@vger.kernel.org # 6.4+
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
drivers/gpu/drm/drm_probe_helper.c | 68 ++++++++++++++++++++----------
include/drm/drm_probe_helper.h | 1 +
2 files changed, 47 insertions(+), 22 deletions(-)
diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index 2fb9bf901a2cc..3f479483d7d80 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -262,6 +262,26 @@ static bool drm_kms_helper_enable_hpd(struct drm_device *dev)
}
#define DRM_OUTPUT_POLL_PERIOD (10*HZ)
+static void reschedule_output_poll_work(struct drm_device *dev)
+{
+ unsigned long delay = DRM_OUTPUT_POLL_PERIOD;
+
+ if (dev->mode_config.delayed_event)
+ /*
+ * FIXME:
+ *
+ * Use short (1s) delay to handle the initial delayed event.
+ * This delay should not be needed, but Optimus/nouveau will
+ * fail in a mysterious way if the delayed event is handled as
+ * soon as possible like it is done in
+ * drm_helper_probe_single_connector_modes() in case the poll
+ * was enabled before.
+ */
+ delay = HZ;
+
+ schedule_delayed_work(&dev->mode_config.output_poll_work, delay);
+}
+
/**
* drm_kms_helper_poll_enable - re-enable output polling.
* @dev: drm_device
@@ -279,37 +299,41 @@ static bool drm_kms_helper_enable_hpd(struct drm_device *dev)
*/
void drm_kms_helper_poll_enable(struct drm_device *dev)
{
- bool poll = false;
- unsigned long delay = DRM_OUTPUT_POLL_PERIOD;
-
if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll ||
dev->mode_config.poll_running)
return;
- poll = drm_kms_helper_enable_hpd(dev);
-
- if (dev->mode_config.delayed_event) {
- /*
- * FIXME:
- *
- * Use short (1s) delay to handle the initial delayed event.
- * This delay should not be needed, but Optimus/nouveau will
- * fail in a mysterious way if the delayed event is handled as
- * soon as possible like it is done in
- * drm_helper_probe_single_connector_modes() in case the poll
- * was enabled before.
- */
- poll = true;
- delay = HZ;
- }
-
- if (poll)
- schedule_delayed_work(&dev->mode_config.output_poll_work, delay);
+ if (drm_kms_helper_enable_hpd(dev) ||
+ dev->mode_config.delayed_event)
+ reschedule_output_poll_work(dev);
dev->mode_config.poll_running = true;
}
EXPORT_SYMBOL(drm_kms_helper_poll_enable);
+/**
+ * drm_kms_helper_poll_reschedule - reschedule the output polling work
+ * @dev: drm_device
+ *
+ * This function reschedules the output polling work, after polling for a
+ * connector has been enabled.
+ *
+ * Drivers must call this helper after enabling polling for a connector by
+ * setting %DRM_CONNECTOR_POLL_CONNECT / %DRM_CONNECTOR_POLL_DISCONNECT flags
+ * in drm_connector::polled. Note that after disabling polling by clearing these
+ * flags for a connector will stop the output polling work automatically if
+ * the polling is disabled for all other connectors as well.
+ *
+ * The function can be called only after polling has been enabled by calling
+ * drm_kms_helper_poll_init() / drm_kms_helper_poll_enable().
+ */
+void drm_kms_helper_poll_reschedule(struct drm_device *dev)
+{
+ if (dev->mode_config.poll_running)
+ reschedule_output_poll_work(dev);
+}
+EXPORT_SYMBOL(drm_kms_helper_poll_reschedule);
+
static enum drm_connector_status
drm_helper_probe_detect_ctx(struct drm_connector *connector, bool force)
{
diff --git a/include/drm/drm_probe_helper.h b/include/drm/drm_probe_helper.h
index 4977e0ab72dbb..fad3c4003b2b5 100644
--- a/include/drm/drm_probe_helper.h
+++ b/include/drm/drm_probe_helper.h
@@ -25,6 +25,7 @@ void drm_kms_helper_connector_hotplug_event(struct drm_connector *connector);
void drm_kms_helper_poll_disable(struct drm_device *dev);
void drm_kms_helper_poll_enable(struct drm_device *dev);
+void drm_kms_helper_poll_reschedule(struct drm_device *dev);
bool drm_kms_helper_is_poll_worker(void);
enum drm_mode_status drm_crtc_helper_mode_valid_fixed(struct drm_crtc *crtc,
--
2.37.2
next reply other threads:[~2023-08-22 11:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-22 11:30 Imre Deak [this message]
2023-08-22 11:30 ` [CI 2/2] drm/i915: Fix HPD polling, reenabling the output poll work as needed Imre Deak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230822113015.41224-1-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=dmitry.baryshkov@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jouni.hogander@intel.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox