* FAILED: patch "[PATCH] Bluetooth: btrtl: Load FW v2 otherwise FW v1 for RTL8852C" failed to apply to 6.5-stable tree
@ 2023-08-30 15:36 gregkh
2023-09-06 7:11 ` [PATCH 6.5.y] Bluetooth: btrtl: Load FW v2 otherwise FW v1 for RTL8852C Juerg Haefliger
0 siblings, 1 reply; 4+ messages in thread
From: gregkh @ 2023-08-30 15:36 UTC (permalink / raw)
To: max.chou, hildawu, juerg.haefliger, luiz.von.dentz; +Cc: stable
The patch below does not apply to the 6.5-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.5.y
git checkout FETCH_HEAD
git cherry-pick -x bd003fb338afee97c76f13c3e9144a7e4ad37179
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2023083021-unease-catfish-92ad@gregkh' --subject-prefix 'PATCH 6.5.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From bd003fb338afee97c76f13c3e9144a7e4ad37179 Mon Sep 17 00:00:00 2001
From: Max Chou <max.chou@realtek.com>
Date: Mon, 7 Aug 2023 19:42:59 +0800
Subject: [PATCH] Bluetooth: btrtl: Load FW v2 otherwise FW v1 for RTL8852C
In this commit, prefer to load FW v2 if available. Fallback to FW v1
otherwise. This behavior is only for RTL8852C.
Fixes: 9a24ce5e29b1 ("Bluetooth: btrtl: Firmware format v2 support")
Cc: stable@vger.kernel.org
Suggested-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Tested-by: Hilda Wu <hildawu@realtek.com>
Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index ddae6524106d..84c2c2e1122f 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -104,7 +104,7 @@ static const struct id_table ic_id_table[] = {
{ IC_INFO(RTL_ROM_LMP_8723A, 0xb, 0x6, HCI_USB),
.config_needed = false,
.has_rom_version = false,
- .fw_name = "rtl_bt/rtl8723a_fw.bin",
+ .fw_name = "rtl_bt/rtl8723a_fw",
.cfg_name = NULL,
.hw_info = "rtl8723au" },
@@ -112,7 +112,7 @@ static const struct id_table ic_id_table[] = {
{ IC_INFO(RTL_ROM_LMP_8723B, 0xb, 0x6, HCI_UART),
.config_needed = true,
.has_rom_version = true,
- .fw_name = "rtl_bt/rtl8723bs_fw.bin",
+ .fw_name = "rtl_bt/rtl8723bs_fw",
.cfg_name = "rtl_bt/rtl8723bs_config",
.hw_info = "rtl8723bs" },
@@ -120,7 +120,7 @@ static const struct id_table ic_id_table[] = {
{ IC_INFO(RTL_ROM_LMP_8723B, 0xb, 0x6, HCI_USB),
.config_needed = false,
.has_rom_version = true,
- .fw_name = "rtl_bt/rtl8723b_fw.bin",
+ .fw_name = "rtl_bt/rtl8723b_fw",
.cfg_name = "rtl_bt/rtl8723b_config",
.hw_info = "rtl8723bu" },
@@ -132,7 +132,7 @@ static const struct id_table ic_id_table[] = {
.hci_bus = HCI_UART,
.config_needed = true,
.has_rom_version = true,
- .fw_name = "rtl_bt/rtl8723cs_cg_fw.bin",
+ .fw_name = "rtl_bt/rtl8723cs_cg_fw",
.cfg_name = "rtl_bt/rtl8723cs_cg_config",
.hw_info = "rtl8723cs-cg" },
@@ -144,7 +144,7 @@ static const struct id_table ic_id_table[] = {
.hci_bus = HCI_UART,
.config_needed = true,
.has_rom_version = true,
- .fw_name = "rtl_bt/rtl8723cs_vf_fw.bin",
+ .fw_name = "rtl_bt/rtl8723cs_vf_fw",
.cfg_name = "rtl_bt/rtl8723cs_vf_config",
.hw_info = "rtl8723cs-vf" },
@@ -156,7 +156,7 @@ static const struct id_table ic_id_table[] = {
.hci_bus = HCI_UART,
.config_needed = true,
.has_rom_version = true,
- .fw_name = "rtl_bt/rtl8723cs_xx_fw.bin",
+ .fw_name = "rtl_bt/rtl8723cs_xx_fw",
.cfg_name = "rtl_bt/rtl8723cs_xx_config",
.hw_info = "rtl8723cs" },
@@ -164,7 +164,7 @@ static const struct id_table ic_id_table[] = {
{ IC_INFO(RTL_ROM_LMP_8723B, 0xd, 0x8, HCI_USB),
.config_needed = true,
.has_rom_version = true,
- .fw_name = "rtl_bt/rtl8723d_fw.bin",
+ .fw_name = "rtl_bt/rtl8723d_fw",
.cfg_name = "rtl_bt/rtl8723d_config",
.hw_info = "rtl8723du" },
@@ -172,7 +172,7 @@ static const struct id_table ic_id_table[] = {
{ IC_INFO(RTL_ROM_LMP_8723B, 0xd, 0x8, HCI_UART),
.config_needed = true,
.has_rom_version = true,
- .fw_name = "rtl_bt/rtl8723ds_fw.bin",
+ .fw_name = "rtl_bt/rtl8723ds_fw",
.cfg_name = "rtl_bt/rtl8723ds_config",
.hw_info = "rtl8723ds" },
@@ -180,7 +180,7 @@ static const struct id_table ic_id_table[] = {
{ IC_INFO(RTL_ROM_LMP_8821A, 0xa, 0x6, HCI_USB),
.config_needed = false,
.has_rom_version = true,
- .fw_name = "rtl_bt/rtl8821a_fw.bin",
+ .fw_name = "rtl_bt/rtl8821a_fw",
.cfg_name = "rtl_bt/rtl8821a_config",
.hw_info = "rtl8821au" },
@@ -189,7 +189,7 @@ static const struct id_table ic_id_table[] = {
.config_needed = false,
.has_rom_version = true,
.has_msft_ext = true,
- .fw_name = "rtl_bt/rtl8821c_fw.bin",
+ .fw_name = "rtl_bt/rtl8821c_fw",
.cfg_name = "rtl_bt/rtl8821c_config",
.hw_info = "rtl8821cu" },
@@ -198,7 +198,7 @@ static const struct id_table ic_id_table[] = {
.config_needed = true,
.has_rom_version = true,
.has_msft_ext = true,
- .fw_name = "rtl_bt/rtl8821cs_fw.bin",
+ .fw_name = "rtl_bt/rtl8821cs_fw",
.cfg_name = "rtl_bt/rtl8821cs_config",
.hw_info = "rtl8821cs" },
@@ -206,7 +206,7 @@ static const struct id_table ic_id_table[] = {
{ IC_INFO(RTL_ROM_LMP_8761A, 0xa, 0x6, HCI_USB),
.config_needed = false,
.has_rom_version = true,
- .fw_name = "rtl_bt/rtl8761a_fw.bin",
+ .fw_name = "rtl_bt/rtl8761a_fw",
.cfg_name = "rtl_bt/rtl8761a_config",
.hw_info = "rtl8761au" },
@@ -215,7 +215,7 @@ static const struct id_table ic_id_table[] = {
.config_needed = false,
.has_rom_version = true,
.has_msft_ext = true,
- .fw_name = "rtl_bt/rtl8761b_fw.bin",
+ .fw_name = "rtl_bt/rtl8761b_fw",
.cfg_name = "rtl_bt/rtl8761b_config",
.hw_info = "rtl8761btv" },
@@ -223,7 +223,7 @@ static const struct id_table ic_id_table[] = {
{ IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB),
.config_needed = false,
.has_rom_version = true,
- .fw_name = "rtl_bt/rtl8761bu_fw.bin",
+ .fw_name = "rtl_bt/rtl8761bu_fw",
.cfg_name = "rtl_bt/rtl8761bu_config",
.hw_info = "rtl8761bu" },
@@ -232,7 +232,7 @@ static const struct id_table ic_id_table[] = {
.config_needed = true,
.has_rom_version = true,
.has_msft_ext = true,
- .fw_name = "rtl_bt/rtl8822cs_fw.bin",
+ .fw_name = "rtl_bt/rtl8822cs_fw",
.cfg_name = "rtl_bt/rtl8822cs_config",
.hw_info = "rtl8822cs" },
@@ -241,7 +241,7 @@ static const struct id_table ic_id_table[] = {
.config_needed = true,
.has_rom_version = true,
.has_msft_ext = true,
- .fw_name = "rtl_bt/rtl8822cs_fw.bin",
+ .fw_name = "rtl_bt/rtl8822cs_fw",
.cfg_name = "rtl_bt/rtl8822cs_config",
.hw_info = "rtl8822cs" },
@@ -250,7 +250,7 @@ static const struct id_table ic_id_table[] = {
.config_needed = false,
.has_rom_version = true,
.has_msft_ext = true,
- .fw_name = "rtl_bt/rtl8822cu_fw.bin",
+ .fw_name = "rtl_bt/rtl8822cu_fw",
.cfg_name = "rtl_bt/rtl8822cu_config",
.hw_info = "rtl8822cu" },
@@ -259,7 +259,7 @@ static const struct id_table ic_id_table[] = {
.config_needed = true,
.has_rom_version = true,
.has_msft_ext = true,
- .fw_name = "rtl_bt/rtl8822b_fw.bin",
+ .fw_name = "rtl_bt/rtl8822b_fw",
.cfg_name = "rtl_bt/rtl8822b_config",
.hw_info = "rtl8822bu" },
@@ -268,7 +268,7 @@ static const struct id_table ic_id_table[] = {
.config_needed = false,
.has_rom_version = true,
.has_msft_ext = true,
- .fw_name = "rtl_bt/rtl8852au_fw.bin",
+ .fw_name = "rtl_bt/rtl8852au_fw",
.cfg_name = "rtl_bt/rtl8852au_config",
.hw_info = "rtl8852au" },
@@ -277,7 +277,7 @@ static const struct id_table ic_id_table[] = {
.config_needed = true,
.has_rom_version = true,
.has_msft_ext = true,
- .fw_name = "rtl_bt/rtl8852bs_fw.bin",
+ .fw_name = "rtl_bt/rtl8852bs_fw",
.cfg_name = "rtl_bt/rtl8852bs_config",
.hw_info = "rtl8852bs" },
@@ -286,7 +286,7 @@ static const struct id_table ic_id_table[] = {
.config_needed = false,
.has_rom_version = true,
.has_msft_ext = true,
- .fw_name = "rtl_bt/rtl8852bu_fw.bin",
+ .fw_name = "rtl_bt/rtl8852bu_fw",
.cfg_name = "rtl_bt/rtl8852bu_config",
.hw_info = "rtl8852bu" },
@@ -295,7 +295,7 @@ static const struct id_table ic_id_table[] = {
.config_needed = false,
.has_rom_version = true,
.has_msft_ext = true,
- .fw_name = "rtl_bt/rtl8852cu_fw.bin",
+ .fw_name = "rtl_bt/rtl8852cu_fw",
.cfg_name = "rtl_bt/rtl8852cu_config",
.hw_info = "rtl8852cu" },
@@ -304,7 +304,7 @@ static const struct id_table ic_id_table[] = {
.config_needed = false,
.has_rom_version = true,
.has_msft_ext = false,
- .fw_name = "rtl_bt/rtl8851bu_fw.bin",
+ .fw_name = "rtl_bt/rtl8851bu_fw",
.cfg_name = "rtl_bt/rtl8851bu_config",
.hw_info = "rtl8851bu" },
};
@@ -1045,6 +1045,7 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
struct sk_buff *skb;
struct hci_rp_read_local_version *resp;
struct hci_command_hdr *cmd;
+ char fw_name[40];
char cfg_name[40];
u16 hci_rev, lmp_subver;
u8 hci_ver, lmp_ver, chip_type = 0;
@@ -1154,8 +1155,26 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
goto err_free;
}
- btrtl_dev->fw_len = rtl_load_file(hdev, btrtl_dev->ic_info->fw_name,
- &btrtl_dev->fw_data);
+ if (!btrtl_dev->ic_info->fw_name) {
+ ret = -ENOMEM;
+ goto err_free;
+ }
+
+ btrtl_dev->fw_len = -EIO;
+ if (lmp_subver == RTL_ROM_LMP_8852A && hci_rev == 0x000c) {
+ snprintf(fw_name, sizeof(fw_name), "%s_v2.bin",
+ btrtl_dev->ic_info->fw_name);
+ btrtl_dev->fw_len = rtl_load_file(hdev, fw_name,
+ &btrtl_dev->fw_data);
+ }
+
+ if (btrtl_dev->fw_len < 0) {
+ snprintf(fw_name, sizeof(fw_name), "%s.bin",
+ btrtl_dev->ic_info->fw_name);
+ btrtl_dev->fw_len = rtl_load_file(hdev, fw_name,
+ &btrtl_dev->fw_data);
+ }
+
if (btrtl_dev->fw_len < 0) {
rtl_dev_err(hdev, "firmware file %s not found",
btrtl_dev->ic_info->fw_name);
@@ -1491,4 +1510,5 @@ MODULE_FIRMWARE("rtl_bt/rtl8852bs_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8852bu_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8852bu_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw_v2.bin");
MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin");
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 6.5.y] Bluetooth: btrtl: Load FW v2 otherwise FW v1 for RTL8852C
2023-08-30 15:36 FAILED: patch "[PATCH] Bluetooth: btrtl: Load FW v2 otherwise FW v1 for RTL8852C" failed to apply to 6.5-stable tree gregkh
@ 2023-09-06 7:11 ` Juerg Haefliger
2023-09-07 10:18 ` Greg KH
0 siblings, 1 reply; 4+ messages in thread
From: Juerg Haefliger @ 2023-09-06 7:11 UTC (permalink / raw)
To: stable; +Cc: Juerg Haefliger, Hilda Wu, Max Chou, Luiz Augusto von Dentz
In this commit, prefer to load FW v2 if available. Fallback to FW v1
otherwise. This behavior is only for RTL8852C.
Fixes: 9a24ce5e29b1 ("Bluetooth: btrtl: Firmware format v2 support")
Cc: stable@vger.kernel.org
Suggested-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Tested-by: Hilda Wu <hildawu@realtek.com>
Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
[juergh: Adjusted context due to missing .hw_info struct element]
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
---
drivers/bluetooth/btrtl.c | 70 +++++++++++++++++++++++++--------------
1 file changed, 45 insertions(+), 25 deletions(-)
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index d978e7cea873..8824686bb09d 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -101,21 +101,21 @@ static const struct id_table ic_id_table[] = {
{ IC_INFO(RTL_ROM_LMP_8723A, 0xb, 0x6, HCI_USB),
.config_needed = false,
.has_rom_version = false,
- .fw_name = "rtl_bt/rtl8723a_fw.bin",
+ .fw_name = "rtl_bt/rtl8723a_fw",
.cfg_name = NULL },
/* 8723BS */
{ IC_INFO(RTL_ROM_LMP_8723B, 0xb, 0x6, HCI_UART),
.config_needed = true,
.has_rom_version = true,
- .fw_name = "rtl_bt/rtl8723bs_fw.bin",
+ .fw_name = "rtl_bt/rtl8723bs_fw",
.cfg_name = "rtl_bt/rtl8723bs_config" },
/* 8723B */
{ IC_INFO(RTL_ROM_LMP_8723B, 0xb, 0x6, HCI_USB),
.config_needed = false,
.has_rom_version = true,
- .fw_name = "rtl_bt/rtl8723b_fw.bin",
+ .fw_name = "rtl_bt/rtl8723b_fw",
.cfg_name = "rtl_bt/rtl8723b_config" },
/* 8723CS-CG */
@@ -126,7 +126,7 @@ static const struct id_table ic_id_table[] = {
.hci_bus = HCI_UART,
.config_needed = true,
.has_rom_version = true,
- .fw_name = "rtl_bt/rtl8723cs_cg_fw.bin",
+ .fw_name = "rtl_bt/rtl8723cs_cg_fw",
.cfg_name = "rtl_bt/rtl8723cs_cg_config" },
/* 8723CS-VF */
@@ -137,7 +137,7 @@ static const struct id_table ic_id_table[] = {
.hci_bus = HCI_UART,
.config_needed = true,
.has_rom_version = true,
- .fw_name = "rtl_bt/rtl8723cs_vf_fw.bin",
+ .fw_name = "rtl_bt/rtl8723cs_vf_fw",
.cfg_name = "rtl_bt/rtl8723cs_vf_config" },
/* 8723CS-XX */
@@ -148,28 +148,28 @@ static const struct id_table ic_id_table[] = {
.hci_bus = HCI_UART,
.config_needed = true,
.has_rom_version = true,
- .fw_name = "rtl_bt/rtl8723cs_xx_fw.bin",
+ .fw_name = "rtl_bt/rtl8723cs_xx_fw",
.cfg_name = "rtl_bt/rtl8723cs_xx_config" },
/* 8723D */
{ IC_INFO(RTL_ROM_LMP_8723B, 0xd, 0x8, HCI_USB),
.config_needed = true,
.has_rom_version = true,
- .fw_name = "rtl_bt/rtl8723d_fw.bin",
+ .fw_name = "rtl_bt/rtl8723d_fw",
.cfg_name = "rtl_bt/rtl8723d_config" },
/* 8723DS */
{ IC_INFO(RTL_ROM_LMP_8723B, 0xd, 0x8, HCI_UART),
.config_needed = true,
.has_rom_version = true,
- .fw_name = "rtl_bt/rtl8723ds_fw.bin",
+ .fw_name = "rtl_bt/rtl8723ds_fw",
.cfg_name = "rtl_bt/rtl8723ds_config" },
/* 8821A */
{ IC_INFO(RTL_ROM_LMP_8821A, 0xa, 0x6, HCI_USB),
.config_needed = false,
.has_rom_version = true,
- .fw_name = "rtl_bt/rtl8821a_fw.bin",
+ .fw_name = "rtl_bt/rtl8821a_fw",
.cfg_name = "rtl_bt/rtl8821a_config" },
/* 8821C */
@@ -177,7 +177,7 @@ static const struct id_table ic_id_table[] = {
.config_needed = false,
.has_rom_version = true,
.has_msft_ext = true,
- .fw_name = "rtl_bt/rtl8821c_fw.bin",
+ .fw_name = "rtl_bt/rtl8821c_fw",
.cfg_name = "rtl_bt/rtl8821c_config" },
/* 8821CS */
@@ -185,14 +185,14 @@ static const struct id_table ic_id_table[] = {
.config_needed = true,
.has_rom_version = true,
.has_msft_ext = true,
- .fw_name = "rtl_bt/rtl8821cs_fw.bin",
+ .fw_name = "rtl_bt/rtl8821cs_fw",
.cfg_name = "rtl_bt/rtl8821cs_config" },
/* 8761A */
{ IC_INFO(RTL_ROM_LMP_8761A, 0xa, 0x6, HCI_USB),
.config_needed = false,
.has_rom_version = true,
- .fw_name = "rtl_bt/rtl8761a_fw.bin",
+ .fw_name = "rtl_bt/rtl8761a_fw",
.cfg_name = "rtl_bt/rtl8761a_config" },
/* 8761B */
@@ -200,14 +200,14 @@ static const struct id_table ic_id_table[] = {
.config_needed = false,
.has_rom_version = true,
.has_msft_ext = true,
- .fw_name = "rtl_bt/rtl8761b_fw.bin",
+ .fw_name = "rtl_bt/rtl8761b_fw",
.cfg_name = "rtl_bt/rtl8761b_config" },
/* 8761BU */
{ IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB),
.config_needed = false,
.has_rom_version = true,
- .fw_name = "rtl_bt/rtl8761bu_fw.bin",
+ .fw_name = "rtl_bt/rtl8761bu_fw",
.cfg_name = "rtl_bt/rtl8761bu_config" },
/* 8822C with UART interface */
@@ -215,7 +215,7 @@ static const struct id_table ic_id_table[] = {
.config_needed = true,
.has_rom_version = true,
.has_msft_ext = true,
- .fw_name = "rtl_bt/rtl8822cs_fw.bin",
+ .fw_name = "rtl_bt/rtl8822cs_fw",
.cfg_name = "rtl_bt/rtl8822cs_config" },
/* 8822C with UART interface */
@@ -223,7 +223,7 @@ static const struct id_table ic_id_table[] = {
.config_needed = true,
.has_rom_version = true,
.has_msft_ext = true,
- .fw_name = "rtl_bt/rtl8822cs_fw.bin",
+ .fw_name = "rtl_bt/rtl8822cs_fw",
.cfg_name = "rtl_bt/rtl8822cs_config" },
/* 8822C with USB interface */
@@ -231,7 +231,7 @@ static const struct id_table ic_id_table[] = {
.config_needed = false,
.has_rom_version = true,
.has_msft_ext = true,
- .fw_name = "rtl_bt/rtl8822cu_fw.bin",
+ .fw_name = "rtl_bt/rtl8822cu_fw",
.cfg_name = "rtl_bt/rtl8822cu_config" },
/* 8822B */
@@ -239,7 +239,7 @@ static const struct id_table ic_id_table[] = {
.config_needed = true,
.has_rom_version = true,
.has_msft_ext = true,
- .fw_name = "rtl_bt/rtl8822b_fw.bin",
+ .fw_name = "rtl_bt/rtl8822b_fw",
.cfg_name = "rtl_bt/rtl8822b_config" },
/* 8852A */
@@ -247,7 +247,7 @@ static const struct id_table ic_id_table[] = {
.config_needed = false,
.has_rom_version = true,
.has_msft_ext = true,
- .fw_name = "rtl_bt/rtl8852au_fw.bin",
+ .fw_name = "rtl_bt/rtl8852au_fw",
.cfg_name = "rtl_bt/rtl8852au_config" },
/* 8852B with UART interface */
@@ -255,7 +255,7 @@ static const struct id_table ic_id_table[] = {
.config_needed = true,
.has_rom_version = true,
.has_msft_ext = true,
- .fw_name = "rtl_bt/rtl8852bs_fw.bin",
+ .fw_name = "rtl_bt/rtl8852bs_fw",
.cfg_name = "rtl_bt/rtl8852bs_config" },
/* 8852B */
@@ -263,7 +263,7 @@ static const struct id_table ic_id_table[] = {
.config_needed = false,
.has_rom_version = true,
.has_msft_ext = true,
- .fw_name = "rtl_bt/rtl8852bu_fw.bin",
+ .fw_name = "rtl_bt/rtl8852bu_fw",
.cfg_name = "rtl_bt/rtl8852bu_config" },
/* 8852C */
@@ -271,7 +271,7 @@ static const struct id_table ic_id_table[] = {
.config_needed = false,
.has_rom_version = true,
.has_msft_ext = true,
- .fw_name = "rtl_bt/rtl8852cu_fw.bin",
+ .fw_name = "rtl_bt/rtl8852cu_fw",
.cfg_name = "rtl_bt/rtl8852cu_config" },
/* 8851B */
@@ -279,7 +279,7 @@ static const struct id_table ic_id_table[] = {
.config_needed = false,
.has_rom_version = true,
.has_msft_ext = false,
- .fw_name = "rtl_bt/rtl8851bu_fw.bin",
+ .fw_name = "rtl_bt/rtl8851bu_fw",
.cfg_name = "rtl_bt/rtl8851bu_config" },
};
@@ -967,6 +967,7 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
struct btrtl_device_info *btrtl_dev;
struct sk_buff *skb;
struct hci_rp_read_local_version *resp;
+ char fw_name[40];
char cfg_name[40];
u16 hci_rev, lmp_subver;
u8 hci_ver, lmp_ver, chip_type = 0;
@@ -1079,8 +1080,26 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
goto err_free;
}
- btrtl_dev->fw_len = rtl_load_file(hdev, btrtl_dev->ic_info->fw_name,
- &btrtl_dev->fw_data);
+ if (!btrtl_dev->ic_info->fw_name) {
+ ret = -ENOMEM;
+ goto err_free;
+ }
+
+ btrtl_dev->fw_len = -EIO;
+ if (lmp_subver == RTL_ROM_LMP_8852A && hci_rev == 0x000c) {
+ snprintf(fw_name, sizeof(fw_name), "%s_v2.bin",
+ btrtl_dev->ic_info->fw_name);
+ btrtl_dev->fw_len = rtl_load_file(hdev, fw_name,
+ &btrtl_dev->fw_data);
+ }
+
+ if (btrtl_dev->fw_len < 0) {
+ snprintf(fw_name, sizeof(fw_name), "%s.bin",
+ btrtl_dev->ic_info->fw_name);
+ btrtl_dev->fw_len = rtl_load_file(hdev, fw_name,
+ &btrtl_dev->fw_data);
+ }
+
if (btrtl_dev->fw_len < 0) {
rtl_dev_err(hdev, "firmware file %s not found",
btrtl_dev->ic_info->fw_name);
@@ -1398,4 +1417,5 @@ MODULE_FIRMWARE("rtl_bt/rtl8852bs_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8852bu_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8852bu_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw_v2.bin");
MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin");
--
2.39.2
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH 6.5.y] Bluetooth: btrtl: Load FW v2 otherwise FW v1 for RTL8852C
2023-09-06 7:11 ` [PATCH 6.5.y] Bluetooth: btrtl: Load FW v2 otherwise FW v1 for RTL8852C Juerg Haefliger
@ 2023-09-07 10:18 ` Greg KH
2023-09-08 5:45 ` Juerg Haefliger
0 siblings, 1 reply; 4+ messages in thread
From: Greg KH @ 2023-09-07 10:18 UTC (permalink / raw)
To: Juerg Haefliger; +Cc: stable, Hilda Wu, Max Chou, Luiz Augusto von Dentz
On Wed, Sep 06, 2023 at 09:11:29AM +0200, Juerg Haefliger wrote:
> In this commit, prefer to load FW v2 if available. Fallback to FW v1
> otherwise. This behavior is only for RTL8852C.
>
> Fixes: 9a24ce5e29b1 ("Bluetooth: btrtl: Firmware format v2 support")
> Cc: stable@vger.kernel.org
> Suggested-by: Juerg Haefliger <juerg.haefliger@canonical.com>
> Tested-by: Hilda Wu <hildawu@realtek.com>
> Signed-off-by: Max Chou <max.chou@realtek.com>
> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
> [juergh: Adjusted context due to missing .hw_info struct element]
> Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
> ---
> drivers/bluetooth/btrtl.c | 70 +++++++++++++++++++++++++--------------
> 1 file changed, 45 insertions(+), 25 deletions(-)
What is the git commit id of this change in Linus's tree?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 6.5.y] Bluetooth: btrtl: Load FW v2 otherwise FW v1 for RTL8852C
2023-09-07 10:18 ` Greg KH
@ 2023-09-08 5:45 ` Juerg Haefliger
0 siblings, 0 replies; 4+ messages in thread
From: Juerg Haefliger @ 2023-09-08 5:45 UTC (permalink / raw)
To: Greg KH; +Cc: stable, Hilda Wu, Max Chou, Luiz Augusto von Dentz
[-- Attachment #1: Type: text/plain, Size: 1174 bytes --]
On Thu, 7 Sep 2023 11:18:13 +0100
Greg KH <gregkh@linuxfoundation.org> wrote:
> On Wed, Sep 06, 2023 at 09:11:29AM +0200, Juerg Haefliger wrote:
> > In this commit, prefer to load FW v2 if available. Fallback to FW v1
> > otherwise. This behavior is only for RTL8852C.
> >
> > Fixes: 9a24ce5e29b1 ("Bluetooth: btrtl: Firmware format v2 support")
> > Cc: stable@vger.kernel.org
> > Suggested-by: Juerg Haefliger <juerg.haefliger@canonical.com>
> > Tested-by: Hilda Wu <hildawu@realtek.com>
> > Signed-off-by: Max Chou <max.chou@realtek.com>
> > Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
> > [juergh: Adjusted context due to missing .hw_info struct element]
> > Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
> > ---
> > drivers/bluetooth/btrtl.c | 70 +++++++++++++++++++++++++--------------
> > 1 file changed, 45 insertions(+), 25 deletions(-)
>
> What is the git commit id of this change in Linus's tree?
bd003fb338afee97c76f13c3e9144a7e4ad37179
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=bd003fb338afee97c76f13c3e9144a7e4ad37179
>
> thanks,
>
> greg k-h
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2023-09-08 5:45 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-08-30 15:36 FAILED: patch "[PATCH] Bluetooth: btrtl: Load FW v2 otherwise FW v1 for RTL8852C" failed to apply to 6.5-stable tree gregkh
2023-09-06 7:11 ` [PATCH 6.5.y] Bluetooth: btrtl: Load FW v2 otherwise FW v1 for RTL8852C Juerg Haefliger
2023-09-07 10:18 ` Greg KH
2023-09-08 5:45 ` Juerg Haefliger
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox