From: <gregkh@linuxfoundation.org>
To: william.zhang@broadcom.com, florian.fainelli@broadcom.com,
miquel.raynal@bootlin.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] mtd: rawnand: brcmnand: Fix ECC level field setting for v7.2" failed to apply to 4.19-stable tree
Date: Sat, 16 Sep 2023 14:23:34 +0200 [thread overview]
Message-ID: <2023091634-friday-olive-b032@gregkh> (raw)
The patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.19.y
git checkout FETCH_HEAD
git cherry-pick -x 2ec2839a9062db8a592525a3fdabd42dcd9a3a9b
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2023091634-friday-olive-b032@gregkh' --subject-prefix 'PATCH 4.19.y' HEAD^..
Possible dependencies:
2ec2839a9062 ("mtd: rawnand: brcmnand: Fix ECC level field setting for v7.2 controller")
25f97138f8c2 ("mtd: rawnand: brcmnand: Allow SoC to provide I/O operations")
7e7c7df5d50f ("mtd: rawnand: brcmnand: support v2.1-v2.2 controllers")
eeeac9cbc4ca ("mtd: rawnand: brcmnand: rename page sizes")
4fd639092b17 ("mtd: rawnand: brcmnand: rename v4 registers")
a5d53ad26a8b ("mtd: rawnand: brcmnand: Add support for flash-edu for dma transfers")
0c06da5788be ("mtd: rawnand: brcmnand: Add support for v7.3 controller")
3c7c1e4594ef ("mtd: rawnand: brcmnand: Refactored code to introduce helper functions")
c1ac2dc34b51 ("mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling")
f1d46942e823 ("mtd: rawnand: Pass a nand_chip object to chip->waitfunc()")
5295cf2e047c ("mtd: rawnand: Pass a nand_chip object to chip->cmdfunc()")
50a487e7719c ("mtd: rawnand: Pass a nand_chip object to chip->dev_ready()")
0f808c1602bc ("mtd: rawnand: Pass a nand_chip object to chip->cmd_ctrl()")
c17556f545c0 ("mtd: rawnand: Pass a nand_chip object to chip->block_xxx() hooks")
758b56f58b66 ("mtd: rawnand: Pass a nand_chip object to chip->select_chip()")
c0739d85723a ("mtd: rawnand: Pass a nand_chip object to chip->write_xxx() hooks")
7e534323c416 ("mtd: rawnand: Pass a nand_chip object to chip->read_xxx() hooks")
47bd59e538d4 ("mtd: rawnand: plat_nand: Pass a nand_chip object to all platform_nand_ctrl hooks")
7525c9518ea6 ("mtd: rawnand: Get rid of the ->read_word() hook")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 2ec2839a9062db8a592525a3fdabd42dcd9a3a9b Mon Sep 17 00:00:00 2001
From: William Zhang <william.zhang@broadcom.com>
Date: Thu, 6 Jul 2023 11:29:05 -0700
Subject: [PATCH] mtd: rawnand: brcmnand: Fix ECC level field setting for v7.2
controller
v7.2 controller has different ECC level field size and shift in the acc
control register than its predecessor and successor controller. It needs
to be set specifically.
Fixes: decba6d47869 ("mtd: brcmnand: Add v7.2 controller support")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-2-william.zhang@broadcom.com
diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index 2e9c2e2d9c9f..9ea96911d16b 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -272,6 +272,7 @@ struct brcmnand_controller {
const unsigned int *page_sizes;
unsigned int page_size_shift;
unsigned int max_oob;
+ u32 ecc_level_shift;
u32 features;
/* for low-power standby/resume only */
@@ -596,6 +597,34 @@ enum {
INTFC_CTLR_READY = BIT(31),
};
+/***********************************************************************
+ * NAND ACC CONTROL bitfield
+ *
+ * Some bits have remained constant throughout hardware revision, while
+ * others have shifted around.
+ ***********************************************************************/
+
+/* Constant for all versions (where supported) */
+enum {
+ /* See BRCMNAND_HAS_CACHE_MODE */
+ ACC_CONTROL_CACHE_MODE = BIT(22),
+
+ /* See BRCMNAND_HAS_PREFETCH */
+ ACC_CONTROL_PREFETCH = BIT(23),
+
+ ACC_CONTROL_PAGE_HIT = BIT(24),
+ ACC_CONTROL_WR_PREEMPT = BIT(25),
+ ACC_CONTROL_PARTIAL_PAGE = BIT(26),
+ ACC_CONTROL_RD_ERASED = BIT(27),
+ ACC_CONTROL_FAST_PGM_RDIN = BIT(28),
+ ACC_CONTROL_WR_ECC = BIT(30),
+ ACC_CONTROL_RD_ECC = BIT(31),
+};
+
+#define ACC_CONTROL_ECC_SHIFT 16
+/* Only for v7.2 */
+#define ACC_CONTROL_ECC_EXT_SHIFT 13
+
static inline bool brcmnand_non_mmio_ops(struct brcmnand_controller *ctrl)
{
#if IS_ENABLED(CONFIG_MTD_NAND_BRCMNAND_BCMA)
@@ -737,6 +766,12 @@ static int brcmnand_revision_init(struct brcmnand_controller *ctrl)
else if (of_property_read_bool(ctrl->dev->of_node, "brcm,nand-has-wp"))
ctrl->features |= BRCMNAND_HAS_WP;
+ /* v7.2 has different ecc level shift in the acc register */
+ if (ctrl->nand_version == 0x0702)
+ ctrl->ecc_level_shift = ACC_CONTROL_ECC_EXT_SHIFT;
+ else
+ ctrl->ecc_level_shift = ACC_CONTROL_ECC_SHIFT;
+
return 0;
}
@@ -931,30 +966,6 @@ static inline int brcmnand_cmd_shift(struct brcmnand_controller *ctrl)
return 0;
}
-/***********************************************************************
- * NAND ACC CONTROL bitfield
- *
- * Some bits have remained constant throughout hardware revision, while
- * others have shifted around.
- ***********************************************************************/
-
-/* Constant for all versions (where supported) */
-enum {
- /* See BRCMNAND_HAS_CACHE_MODE */
- ACC_CONTROL_CACHE_MODE = BIT(22),
-
- /* See BRCMNAND_HAS_PREFETCH */
- ACC_CONTROL_PREFETCH = BIT(23),
-
- ACC_CONTROL_PAGE_HIT = BIT(24),
- ACC_CONTROL_WR_PREEMPT = BIT(25),
- ACC_CONTROL_PARTIAL_PAGE = BIT(26),
- ACC_CONTROL_RD_ERASED = BIT(27),
- ACC_CONTROL_FAST_PGM_RDIN = BIT(28),
- ACC_CONTROL_WR_ECC = BIT(30),
- ACC_CONTROL_RD_ECC = BIT(31),
-};
-
static inline u32 brcmnand_spare_area_mask(struct brcmnand_controller *ctrl)
{
if (ctrl->nand_version == 0x0702)
@@ -967,18 +978,15 @@ static inline u32 brcmnand_spare_area_mask(struct brcmnand_controller *ctrl)
return GENMASK(4, 0);
}
-#define NAND_ACC_CONTROL_ECC_SHIFT 16
-#define NAND_ACC_CONTROL_ECC_EXT_SHIFT 13
-
static inline u32 brcmnand_ecc_level_mask(struct brcmnand_controller *ctrl)
{
u32 mask = (ctrl->nand_version >= 0x0600) ? 0x1f : 0x0f;
- mask <<= NAND_ACC_CONTROL_ECC_SHIFT;
+ mask <<= ACC_CONTROL_ECC_SHIFT;
/* v7.2 includes additional ECC levels */
- if (ctrl->nand_version >= 0x0702)
- mask |= 0x7 << NAND_ACC_CONTROL_ECC_EXT_SHIFT;
+ if (ctrl->nand_version == 0x0702)
+ mask |= 0x7 << ACC_CONTROL_ECC_EXT_SHIFT;
return mask;
}
@@ -992,8 +1000,8 @@ static void brcmnand_set_ecc_enabled(struct brcmnand_host *host, int en)
if (en) {
acc_control |= ecc_flags; /* enable RD/WR ECC */
- acc_control |= host->hwcfg.ecc_level
- << NAND_ACC_CONTROL_ECC_SHIFT;
+ acc_control &= ~brcmnand_ecc_level_mask(ctrl);
+ acc_control |= host->hwcfg.ecc_level << ctrl->ecc_level_shift;
} else {
acc_control &= ~ecc_flags; /* disable RD/WR ECC */
acc_control &= ~brcmnand_ecc_level_mask(ctrl);
@@ -2561,7 +2569,7 @@ static int brcmnand_set_cfg(struct brcmnand_host *host,
tmp &= ~brcmnand_ecc_level_mask(ctrl);
tmp &= ~brcmnand_spare_area_mask(ctrl);
if (ctrl->nand_version >= 0x0302) {
- tmp |= cfg->ecc_level << NAND_ACC_CONTROL_ECC_SHIFT;
+ tmp |= cfg->ecc_level << ctrl->ecc_level_shift;
tmp |= cfg->spare_area_size;
}
nand_writereg(ctrl, acc_control_offs, tmp);
next reply other threads:[~2023-09-16 12:24 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-16 12:23 gregkh [this message]
2023-09-19 21:43 ` [PATCH 4.19.y] mtd: rawnand: brcmnand: Fix ECC level field setting for v7.2 controller William Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2023091634-friday-olive-b032@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=florian.fainelli@broadcom.com \
--cc=miquel.raynal@bootlin.com \
--cc=stable@vger.kernel.org \
--cc=william.zhang@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).