From: <gregkh@linuxfoundation.org>
To: johan+linaro@kernel.org, broonie@kernel.org,
naga.sureshkumar.relli@xilinx.com, shubhrajyoti.datta@xilinx.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] spi: zynqmp-gqspi: fix clock imbalance on probe failure" failed to apply to 4.19-stable tree
Date: Wed, 04 Oct 2023 15:57:22 +0200 [thread overview]
Message-ID: <2023100421-tribute-plausible-7fed@gregkh> (raw)
The patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.19.y
git checkout FETCH_HEAD
git cherry-pick -x 1527b076ae2cb6a9c590a02725ed39399fcad1cf
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2023100421-tribute-plausible-7fed@gregkh' --subject-prefix 'PATCH 4.19.y' HEAD^..
Possible dependencies:
1527b076ae2c ("spi: zynqmp-gqspi: fix clock imbalance on probe failure")
3ffefa1d9c9e ("spi: zynqmp-gqspi: Convert to platform remove callback returning void")
58eaa7b2d07d ("spi: spi-zynqmp-gqspi: Fix runtime PM imbalance in zynqmp_qspi_probe")
1c26372e5aa9 ("spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework")
91af6eb04a6b ("spi: spi-zynqmp-gqspi: Fix kernel-doc warnings")
4b42b0b49812 ("spi: spi-zynqmp-gqspi: Correct a couple of misspellings in kerneldoc")
4db8180ffe7c ("firmware: xilinx: Remove eemi ops for fpga related APIs")
bc86f9c54616 ("firmware: xilinx: Remove eemi ops for aes engine")
cbbbda71fe37 ("firmware: xilinx: Remove eemi ops for set_requirement")
07fb1a4619fc ("firmware: xilinx: Remove eemi ops for release_node")
bf8b27ed2324 ("firmware: xilinx: Remove eemi ops for request_node")
951d0a97e41c ("firmware: xilinx: Remove eemi ops for set_suspend_mode")
9474da950d1e ("firmware: xilinx: Remove eemi ops for init_finalize")
1b413581fe26 ("firmware: xilinx: Remove eemi ops for reset_get_status")
cf23ec353146 ("firmware: xilinx: Remove eemi ops for reset_assert")
426c8d85df7a ("firmware: xilinx: Use APIs instead of IOCTLs")
70c0d36462ca ("firmware: xilinx: Remove eemi ops for clock set/get parent")
7a1e10621a21 ("firmware: xilinx: Remove eemi ops for clock set/get rate")
0667a8d144bc ("firmware: xilinx: Remove eemi ops for clock_getdivider")
fc9fb8fb985c ("firmware: xilinx: Remove eemi ops for clock_setdivider")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 1527b076ae2cb6a9c590a02725ed39399fcad1cf Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan+linaro@kernel.org>
Date: Thu, 22 Jun 2023 10:24:35 +0200
Subject: [PATCH] spi: zynqmp-gqspi: fix clock imbalance on probe failure
Make sure that the device is not runtime suspended before explicitly
disabling the clocks on probe failure and on driver unbind to avoid a
clock enable-count imbalance.
Fixes: 9e3a000362ae ("spi: zynqmp: Add pm runtime support")
Cc: stable@vger.kernel.org # 4.19
Cc: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
Cc: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/Message-Id: <20230622082435.7873-1-johan+linaro@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index fb2ca9b90eab..c309dedfd602 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -1342,9 +1342,9 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
return 0;
clk_dis_all:
- pm_runtime_put_sync(&pdev->dev);
- pm_runtime_set_suspended(&pdev->dev);
pm_runtime_disable(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
clk_disable_unprepare(xqspi->refclk);
clk_dis_pclk:
clk_disable_unprepare(xqspi->pclk);
@@ -1368,11 +1368,15 @@ static void zynqmp_qspi_remove(struct platform_device *pdev)
{
struct zynqmp_qspi *xqspi = platform_get_drvdata(pdev);
+ pm_runtime_get_sync(&pdev->dev);
+
zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, 0x0);
+
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
clk_disable_unprepare(xqspi->refclk);
clk_disable_unprepare(xqspi->pclk);
- pm_runtime_set_suspended(&pdev->dev);
- pm_runtime_disable(&pdev->dev);
}
MODULE_DEVICE_TABLE(of, zynqmp_qspi_of_match);
reply other threads:[~2023-10-04 13:57 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2023100421-tribute-plausible-7fed@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=broonie@kernel.org \
--cc=johan+linaro@kernel.org \
--cc=naga.sureshkumar.relli@xilinx.com \
--cc=shubhrajyoti.datta@xilinx.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox