From: Badhri Jagan Sridharan <badhri@google.com>
To: gregkh@linuxfoundation.org, linux@roeck-us.net,
heikki.krogerus@linux.intel.com
Cc: kyletso@google.com, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org, stable@vger.kernel.org,
Badhri Jagan Sridharan <badhri@google.com>
Subject: [PATCH v3] usb: typec: tcpm: Fix sink caps op current check
Date: Wed, 1 Nov 2023 01:28:45 +0000 [thread overview]
Message-ID: <20231101012845.2701348-1-badhri@google.com> (raw)
TCPM checks for sink caps operational current even when PD is disabled.
This incorrectly sets tcpm_set_charge() when PD is disabled.
Check for sink caps only when PD is enabled.
[ 97.572342] Start toggling
[ 97.578949] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
[ 99.571648] CC1: 0 -> 0, CC2: 0 -> 4 [state TOGGLING, polarity 0, connected]
[ 99.571658] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS]
[ 99.571673] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS]
[ 99.741778] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms]
[ 99.789283] CC1: 0 -> 0, CC2: 4 -> 5 [state SNK_DEBOUNCED, polarity 0, connected]
[ 99.789306] state change SNK_DEBOUNCED -> SNK_DEBOUNCED [rev3 NONE_AMS]
[ 99.903584] VBUS on
[ 99.903591] state change SNK_DEBOUNCED -> SNK_ATTACHED [rev3 NONE_AMS]
[ 99.903600] polarity 1
[ 99.910155] enable vbus discharge ret:0
[ 99.910160] Requesting mux state 1, usb-role 2, orientation 2
[ 99.946791] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS]
[ 99.946798] state change SNK_STARTUP -> SNK_DISCOVERY [rev3 NONE_AMS]
[ 99.946800] Setting voltage/current limit 5000 mV 500 mA
[ 99.946803] vbus=0 charge:=1
[ 100.027139] state change SNK_DISCOVERY -> SNK_READY [rev3 NONE_AMS]
[ 100.027145] Setting voltage/current limit 5000 mV 3000 mA
[ 100.466830] VBUS on
Cc: stable@vger.kernel.org
Fixes: 803b1c8a0cea ("usb: typec: tcpm: not sink vbus if operational current is 0mA")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
---
Changes since v2:
* Fix the "Fixes" tag
* Refactor code based on Guenter Roeck's suggestion.
Changes since v1:
* Fix commit title and description to address comments from Guenter Roeck
---
drivers/usb/typec/tcpm/tcpm.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index 058d5b853b57..afc791ab6d4f 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -4273,7 +4273,8 @@ static void run_state_machine(struct tcpm_port *port)
current_lim = PD_P_SNK_STDBY_MW / 5;
tcpm_set_current_limit(port, current_lim, 5000);
/* Not sink vbus if operational current is 0mA */
- tcpm_set_charge(port, !!pdo_max_current(port->snk_pdo[0]));
+ tcpm_set_charge(port, !port->pd_supported ||
+ pdo_max_current(port->snk_pdo[0]));
if (!port->pd_supported)
tcpm_set_state(port, SNK_READY, 0);
base-commit: c70793fb7632a153862ee9060e6d48131469a29c
--
2.42.0.820.g83a721a137-goog
next reply other threads:[~2023-11-01 1:28 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-01 1:28 Badhri Jagan Sridharan [this message]
2023-11-01 1:48 ` [PATCH v3] usb: typec: tcpm: Fix sink caps op current check Guenter Roeck
2023-11-08 1:25 ` William McVicker
2023-11-08 7:38 ` Heikki Krogerus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231101012845.2701348-1-badhri@google.com \
--to=badhri@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=kyletso@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox