From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
patches@lists.linux.dev, Cameron Williams <cang1@live.co.uk>
Subject: [PATCH 6.6 25/30] tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
Date: Mon, 6 Nov 2023 14:03:43 +0100 [thread overview]
Message-ID: <20231106130258.790483281@linuxfoundation.org> (raw)
In-Reply-To: <20231106130257.903265688@linuxfoundation.org>
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cameron Williams <cang1@live.co.uk>
commit e4876dacaca46a1b09f9b417480924ab12019a5b upstream.
Some of the later revisions of the Brainboxes PX cards are based
on the Oxford Semiconductor chipset. Due to the chip's unique setup
these cards need to be initialised.
Previously these were tested against a reference card with the same broken
baudrate on another PC, cancelling out the effect. With this patch they
work and can transfer/receive find against an FTDI-based device.
Add all of the cards which require this setup to the quirks table.
Thanks to Maciej W. Rozycki for clarification on this chip.
Fixes: ef5a03a26c87 ("tty: 8250: Add support for Brainboxes PX cards.")
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB7899D222A4AB2A4E8C57108FC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/8250/8250_pci.c | 147 +++++++++++++++++++++++++++++++++++++
1 file changed, 147 insertions(+)
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -2429,6 +2429,153 @@ static struct pci_serial_quirk pci_seria
.init = pci_oxsemi_tornado_init,
.setup = pci_oxsemi_tornado_setup,
},
+ /*
+ * Brainboxes devices - all Oxsemi based
+ */
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4027,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4028,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4029,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4019,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4016,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4015,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x400A,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x400E,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x400C,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x400B,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x400F,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4010,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4011,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x401D,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x401E,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4013,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4017,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4018,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x8811,
next prev parent reply other threads:[~2023-11-06 13:08 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-06 13:03 [PATCH 6.6 00/30] 6.6.1-rc1 review Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 6.6 01/30] drm/amd/display: Dont use fsleep for PSR exit waits Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 6.6 02/30] power: supply: core: Use blocking_notifier_call_chain to avoid RCU complaint Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 6.6 03/30] perf evlist: Avoid frequency mode for the dummy event Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 6.6 04/30] tracing: Have trace_event_file have ref counters Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 6.6 05/30] eventfs: Remove "is_freed" union with rcu head Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 6.6 06/30] eventfs: Save ownership and mode Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 6.6 07/30] eventfs: Delete eventfs_inode when the last dentry is freed Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 6.6 08/30] eventfs: Use simple_recursive_removal() to clean up dentries Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 6.6 09/30] ALSA: usb-audio: add quirk flag to enable native DSD for McIntosh devices Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 6.6 10/30] PCI: Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 6.6 11/30] usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 6.6 12/30] usb: typec: tcpm: Add additional checks for contaminant Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 6.6 13/30] usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm() Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 6.6 14/30] usb: raw-gadget: properly handle interrupted requests Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 6.6 15/30] Bluetooth: hci_bcm4377: Mark bcm4378/bcm4387 as BROKEN_LE_CODED Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 6.6 16/30] tty: n_gsm: fix race condition in status line change on dead connections Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 6.6 17/30] tty: 8250: Remove UC-257 and UC-431 Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 6.6 18/30] tty: 8250: Add support for additional Brainboxes UC cards Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 6.6 19/30] tty: 8250: Add support for Brainboxes UP cards Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 6.6 20/30] tty: 8250: Add support for Intashield IS-100 Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 6.6 21/30] tty: 8250: Fix port count of PX-257 Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 6.6 22/30] tty: 8250: Fix up PX-803/PX-857 Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 6.6 23/30] tty: 8250: Add support for additional Brainboxes PX cards Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 6.6 24/30] tty: 8250: Add support for Intashield IX cards Greg Kroah-Hartman
2023-11-06 13:03 ` Greg Kroah-Hartman [this message]
2023-11-06 13:03 ` [PATCH 6.6 26/30] dt-bindings: serial: rs485: Add rs485-rts-active-high Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 6.6 27/30] misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 6.6 28/30] serial: core: Fix runtime PM handling for pending tx Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 6.6 29/30] ALSA: hda: intel-dsp-config: Fix JSL Chromebook quirk detection Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 6.6 30/30] ASoC: SOF: sof-pci-dev: Fix community key " Greg Kroah-Hartman
2023-11-06 17:25 ` [PATCH 6.6 00/30] 6.6.1-rc1 review SeongJae Park
2023-11-06 18:21 ` Florian Fainelli
2023-11-06 19:01 ` Allen Pais
2023-11-07 2:12 ` Rudi Heitbaum
2023-11-07 5:04 ` Bagas Sanjaya
2023-11-07 8:47 ` Ron Economos
2023-11-07 11:02 ` Takeshi Ogasawara
2023-11-07 15:27 ` Shuah Khan
2023-11-07 17:15 ` Ricardo B. Marliere
2023-11-07 18:55 ` Guenter Roeck
2023-11-07 19:18 ` Naresh Kamboju
2023-11-08 9:50 ` Jon Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231106130258.790483281@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=cang1@live.co.uk \
--cc=patches@lists.linux.dev \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox