[PATCH 5.15 000/128] 5.15.138-rc1 review

[PATCH 5.15 000/128] 5.15.138-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.15.138 release.
There are 128 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 08 Nov 2023 13:02:46 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.138-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.15.138-rc1

Mark Hasemeyer <markhas@chromium.org>
    ALSA: hda: intel-dsp-config: Fix JSL Chromebook quirk detection

Siddharth Vadapalli <s-vadapalli@ti.com>
    misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support

Cameron Williams <cang1@live.co.uk>
    tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks

Cameron Williams <cang1@live.co.uk>
    tty: 8250: Add support for Intashield IX cards

Cameron Williams <cang1@live.co.uk>
    tty: 8250: Add support for additional Brainboxes PX cards

Cameron Williams <cang1@live.co.uk>
    tty: 8250: Fix up PX-803/PX-857

Cameron Williams <cang1@live.co.uk>
    tty: 8250: Fix port count of PX-257

Cameron Williams <cang1@live.co.uk>
    tty: 8250: Add support for Intashield IS-100

Cameron Williams <cang1@live.co.uk>
    tty: 8250: Add support for Brainboxes UP cards

Cameron Williams <cang1@live.co.uk>
    tty: 8250: Add support for additional Brainboxes UC cards

Cameron Williams <cang1@live.co.uk>
    tty: 8250: Remove UC-257 and UC-431

Daniel Starke <daniel.starke@siemens.com>
    tty: n_gsm: fix race condition in status line change on dead connections

Andrey Konovalov <andreyknvl@gmail.com>
    usb: raw-gadget: properly handle interrupted requests

Jimmy Hu <hhhuuu@google.com>
    usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm()

LihaSika <lihasika@gmail.com>
    usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility

Vicki Pfau <vi@endrift.com>
    PCI: Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device

Mario Limonciello <mario.limonciello@amd.com>
    drm/amd: Disable ASPM for VI w/ all Intel systems

Mario Limonciello <mario.limonciello@amd.com>
    drm/amd: Move helper for dynamic speed switch check out of smu13

Oliver Hartkopp <socketcan@hartkopp.net>
    can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior

Oliver Hartkopp <socketcan@hartkopp.net>
    can: isotp: isotp_bind(): do not validate unused address information

Oliver Hartkopp <socketcan@hartkopp.net>
    can: isotp: add local echo tx processing and tx without FC

Oliver Hartkopp <socketcan@hartkopp.net>
    can: isotp: handle wait_event_interruptible() return values

Oliver Hartkopp <socketcan@hartkopp.net>
    can: isotp: check CAN address family in isotp_bind()

Oliver Hartkopp <socketcan@hartkopp.net>
    can: isotp: isotp_bind(): return -EINVAL on incorrect CAN ID formatting

Oliver Hartkopp <socketcan@hartkopp.net>
    can: isotp: set max PDU size to 64 kByte

Ian Rogers <irogers@google.com>
    perf evlist: Avoid frequency mode for the dummy event

Namhyung Kim <namhyung@kernel.org>
    perf tools: Get rid of evlist__add_on_all_cpus()

Adrian Hunter <adrian.hunter@intel.com>
    perf evlist: Add evlist__add_dummy_on_all_cpus()

Michael Ellerman <mpe@ellerman.id.au>
    powerpc/mm: Fix boot crash with FLATMEM

Douglas Anderson <dianders@chromium.org>
    r8152: Check for unplug in r8153b_ups_en() / r8153c_ups_en()

Douglas Anderson <dianders@chromium.org>
    r8152: Check for unplug in rtl_phy_patch_request()

Su Hui <suhui@nfschina.com>
    net: chelsio: cxgb4: add an error code check in t4_load_phy_fw

Liming Sun <limings@nvidia.com>
    platform/mellanox: mlxbf-tmfifo: Fix a warning message

Tomas Henzl <thenzl@redhat.com>
    scsi: mpt3sas: Fix in error path

Jorge Maidana <jorgem.linux@gmail.com>
    fbdev: uvesafb: Call cn_del_callback() at the end of uvesafb_exit()

Karolina Stolarek <karolina.stolarek@intel.com>
    drm/ttm: Reorder sys manager cleanup step

Shuming Fan <shumingf@realtek.com>
    ASoC: rt5650: fix the wrong result of key button

Florian Westphal <fw@strlen.de>
    netfilter: nfnetlink_log: silence bogus compiler warning

William A. Kennington III <william@wkennington.com>
    spi: npcm-fiu: Fix UMA reads when dummy.nbytes == 0

Su Hui <suhui@nfschina.com>
    fs/ntfs3: Avoid possible memory leak

Gabriel Marcano <gabemarcano@yahoo.com>
    fs/ntfs3: Fix directory element type detection

Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
    fs/ntfs3: Fix NULL pointer dereference on error in attr_allocate_frame()

Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
    fs/ntfs3: Fix possible NULL-ptr-deref in ni_readpage_cmpr()

Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
    fs/ntfs3: Use kvmalloc instead of kmalloc(... __GFP_NOWARN)

Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
    fs/ntfs3: Write immediately updated ntfs state

Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
    fs/ntfs3: Add ckeck in ni_update_parent()

Arnd Bergmann <arnd@arndb.de>
    fbdev: atyfb: only use ioremap_uc() on i386 and ia64

Dmitry Torokhov <dmitry.torokhov@gmail.com>
    Input: synaptics-rmi4 - handle reset delay when using SMBus trsnsport

Christophe Leroy <christophe.leroy@csgroup.eu>
    powerpc/85xx: Fix math emulation exception

Zhang Shurong <zhang_shurong@foxmail.com>
    dmaengine: ste_dma40: Fix PM disable depth imbalance in d40_probe

Ben Wolsieffer <ben.wolsieffer@hefring.com>
    irqchip/stm32-exti: add missing DT IRQ flag translation

Anup Patel <apatel@ventanamicro.com>
    irqchip/riscv-intc: Mark all INTC nodes as initialized

Gustavo A. R. Silva <gustavoars@kernel.org>
    net: sched: cls_u32: Fix allocation size in u32_init()

Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
    ASoC: simple-card: fixup asoc_simple_probe() error handling

Juergen Gross <jgross@suse.com>
    x86: Fix .brk attribute in linker script

Hangyu Hua <hbh25y@gmail.com>
    rpmsg: Fix possible refcount leak in rpmsg_register_device_override()

Bjorn Andersson <quic_bjorande@quicinc.com>
    rpmsg: glink: Release driver_override

Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
    rpmsg: Fix calling device_lock() on non-initialized device

Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
    rpmsg: Fix kfree() of static memory on setting driver_override

Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
    rpmsg: Constify local variable in field store macro

Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
    driver: platform: Add helper for safer setting of driver_override

John Sperbeck <jsperbeck@google.com>
    objtool/x86: add missing embedded_insn check

Baokun Li <libaokun1@huawei.com>
    ext4: avoid overlapping preallocations due to overflow

Baokun Li <libaokun1@huawei.com>
    ext4: fix BUG in ext4_mb_new_inode_pa() due to overflow

Baokun Li <libaokun1@huawei.com>
    ext4: add two helper functions extent_logical_end() and pa_logical_end()

Josh Poimboeuf <jpoimboe@kernel.org>
    x86/mm: Fix RESERVE_BRK() for older binutils

Josh Poimboeuf <jpoimboe@redhat.com>
    x86/mm: Simplify RESERVE_BRK()

Thomas Gleixner <tglx@linutronix.de>
    x86/i8259: Skip probing when ACPI/MADT advertises PCAT compatibility

Shailend Chand <shailend@google.com>
    gve: Fix GFP flags when allocing pages

Linus Walleij <linus.walleij@linaro.org>
    iio: afe: rescale: Accept only offset channels

Liam Beguin <liambeguin@gmail.com>
    iio: afe: rescale: add offset support

Liam Beguin <liambeguin@gmail.com>
    iio: afe: rescale: expose scale processing function

Liam Beguin <liambeguin@gmail.com>
    iio: afe: rescale: reorder includes

Alessandro Carminati <alessandro.carminati@gmail.com>
    clk: Sanitize possible_parent_show to Handle Return Value of of_clk_get_parent_name

Al Viro <viro@zeniv.linux.org.uk>
    sparc32: fix a braino in fault handling in csum_and_copy_..._user()

Peter Zijlstra <peterz@infradead.org>
    perf/core: Fix potential NULL deref

Peng Fan <peng.fan@nxp.com>
    nvmem: imx: correct nregs for i.MX6UL

Peng Fan <peng.fan@nxp.com>
    nvmem: imx: correct nregs for i.MX6SLL

Peng Fan <peng.fan@nxp.com>
    nvmem: imx: correct nregs for i.MX6ULL

Ekansh Gupta <quic_ekangupt@quicinc.com>
    misc: fastrpc: Clean buffers on remote invocation failures

Yujie Liu <yujie.liu@intel.com>
    tracing/kprobes: Fix the description of variable length arguments

Jian Zhang <zhangjian.3032@bytedance.com>
    i2c: aspeed: Fix i2c bus hang in slave read

Alain Volmat <alain.volmat@foss.st.com>
    i2c: stm32f7: Fix PEC handling in case of SMBUS transfers

Herve Codina <herve.codina@bootlin.com>
    i2c: muxes: i2c-demux-pinctrl: Use of_get_i2c_adapter_by_node()

Herve Codina <herve.codina@bootlin.com>
    i2c: muxes: i2c-mux-gpmux: Use of_get_i2c_adapter_by_node()

Herve Codina <herve.codina@bootlin.com>
    i2c: muxes: i2c-mux-pinctrl: Use of_get_i2c_adapter_by_node()

Robert Hancock <robert.hancock@calian.com>
    iio: adc: xilinx-xadc: Correct temperature offset/scale for UltraScale

Robert Hancock <robert.hancock@calian.com>
    iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholds

Marek Szyprowski <m.szyprowski@samsung.com>
    iio: exynos-adc: request second interupt only when touchscreen mode is used

Haibo Li <haibo.li@mediatek.com>
    kasan: print the original fault addr when access invalid shadow

Ivan Vecera <ivecera@redhat.com>
    i40e: Fix wrong check for I40E_TXR_FLAGS_WB_ON_ITR

Pablo Neira Ayuso <pablo@netfilter.org>
    gtp: fix fragmentation needed check with gso

Pablo Neira Ayuso <pablo@netfilter.org>
    gtp: uapi: fix GTPA_MAX

Fred Chen <fred.chenchen03@gmail.com>
    tcp: fix wrong RTO timeout when received SACK reneging

Douglas Anderson <dianders@chromium.org>
    r8152: Release firmware if we have an error in probe

Douglas Anderson <dianders@chromium.org>
    r8152: Cancel hw_phy_work if we have an error in probe

Douglas Anderson <dianders@chromium.org>
    r8152: Run the unload routine if we have errors during probe

Douglas Anderson <dianders@chromium.org>
    r8152: Increase USB control msg timeout to 5000ms as per spec

Shigeru Yoshida <syoshida@redhat.com>
    net: usb: smsc95xx: Fix uninit-value access in smsc95xx_read_reg

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    net: ieee802154: adf7242: Fix some potential buffer overflow in adf7242_stats_show()

Sasha Neftin <sasha.neftin@intel.com>
    igc: Fix ambiguity in the ethtool advertising

Eric Dumazet <edumazet@google.com>
    neighbour: fix various data-races

Mateusz Palczewski <mateusz.palczewski@intel.com>
    igb: Fix potential memory leak in igb_add_ethtool_nfc_entry

Kunwu Chan <chentao@kylinos.cn>
    treewide: Spelling fix in comment

Ivan Vecera <ivecera@redhat.com>
    i40e: Fix I40E_FLAG_VF_VLAN_PRUNING value

Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
    r8169: fix the KCSAN reported data race in rtl_rx while reading desc->opts1

Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
    r8169: fix the KCSAN reported data-race in rtl_tx while reading TxDescArray[entry].opts1

Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
    r8169: fix the KCSAN reported data-race in rtl_tx() while reading tp->cur_tx

Hao Ge <gehao@kylinos.cn>
    firmware/imx-dsp: Fix use_after_free in imx_dsp_setup_channels()

Lukasz Majczak <lma@semihalf.com>
    drm/dp_mst: Fix NULL deref in get_mst_branch_device_by_guid_helper()

Alexandru Matei <alexandru.matei@uipath.com>
    vsock/virtio: initialize the_virtio_vsock before using VQs

Stefano Garzarella <sgarzare@redhat.com>
    vsock/virtio: add support for device suspend/resume

Stefano Garzarella <sgarzare@redhat.com>
    vsock/virtio: factor our the code to initialize and delete VQs

Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
    drm/i915/pmu: Check if pmu is closed before stopping event

Al Viro <viro@zeniv.linux.org.uk>
    nfsd: lock_rename() needs both directories to live on the same fs

Gregory Price <gourry.memverge@gmail.com>
    mm/migrate: fix do_pages_move for compat pointers

Kemeng Shi <shikemeng@huaweicloud.com>
    mm/page_alloc: correct start page when guard page debug is enabled

Eric Auger <eric.auger@redhat.com>
    vhost: Allow null msg.size on VHOST_IOTLB_INVALIDATE

Maximilian Heyne <mheyne@amazon.de>
    virtio-mmio: fix memory leak of vm_dev

Gavin Shan <gshan@redhat.com>
    virtio_balloon: Fix endless deflation and inflation on arm64

Rodríguez Barbarin, José Javier <JoseJavier.Rodriguez@duagon.com>
    mcb-lpc: Reallocate memory region to avoid memory overlapping

Rodríguez Barbarin, José Javier <JoseJavier.Rodriguez@duagon.com>
    mcb: Return actual parsed size when reading chameleon table

Paolo Abeni <pabeni@redhat.com>
    mptcp: more conservative check for zero probes

Eric Dumazet <edumazet@google.com>
    tcp: cleanup tcp_remove_empty_skb() use

Eric Dumazet <edumazet@google.com>
    tcp: remove dead code from tcp_sendmsg_locked()

Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
    pinctrl: qcom: lpass-lpi: fix concurrent register updates

Johan Hovold <johan+linaro@kernel.org>
    ASoC: codecs: wcd938x: fix runtime PM imbalance on remove

Johan Hovold <johan+linaro@kernel.org>
    ASoC: codecs: wcd938x: fix resource leaks on bind errors


-------------

Diffstat:

 Makefile                                          |   4 +-
 arch/powerpc/kernel/head_fsl_booke.S              |   2 +-
 arch/powerpc/kernel/setup-common.c                |   2 +
 arch/powerpc/mm/mem.c                             |   1 -
 arch/sparc/lib/checksum_32.S                      |   2 +-
 arch/x86/include/asm/i8259.h                      |   2 +
 arch/x86/include/asm/setup.h                      |  46 ++-
 arch/x86/kernel/acpi/boot.c                       |   3 +
 arch/x86/kernel/i8259.c                           |  38 +-
 arch/x86/kernel/setup.c                           |   5 -
 arch/x86/kernel/vmlinux.lds.S                     |   2 +-
 drivers/base/driver.c                             |  69 ++++
 drivers/base/platform.c                           |  28 +-
 drivers/clk/clk.c                                 |  21 +-
 drivers/dma/ste_dma40.c                           |   1 +
 drivers/firmware/imx/imx-dsp.c                    |   2 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu.h               |   1 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c        |  19 +
 drivers/gpu/drm/amd/amdgpu/vi.c                   |   2 +-
 drivers/gpu/drm/drm_dp_mst_topology.c             |   6 +-
 drivers/gpu/drm/i915/i915_pmu.c                   |   9 +
 drivers/gpu/drm/ttm/ttm_device.c                  |   8 +-
 drivers/i2c/busses/i2c-aspeed.c                   |   3 +-
 drivers/i2c/busses/i2c-stm32f7.c                  |   9 +-
 drivers/i2c/muxes/i2c-demux-pinctrl.c             |   2 +-
 drivers/i2c/muxes/i2c-mux-gpmux.c                 |   2 +-
 drivers/i2c/muxes/i2c-mux-pinctrl.c               |   2 +-
 drivers/iio/adc/exynos_adc.c                      |  24 +-
 drivers/iio/adc/xilinx-xadc-core.c                |  39 +-
 drivers/iio/adc/xilinx-xadc.h                     |   2 +
 drivers/iio/afe/iio-rescale.c                     | 162 ++++++--
 drivers/input/mouse/synaptics.c                   |   1 +
 drivers/input/rmi4/rmi_smbus.c                    |  50 +--
 drivers/irqchip/irq-riscv-intc.c                  |  10 +-
 drivers/irqchip/irq-stm32-exti.c                  |   1 +
 drivers/mcb/mcb-lpc.c                             |  35 +-
 drivers/mcb/mcb-parse.c                           |  15 +-
 drivers/misc/fastrpc.c                            |  10 +-
 drivers/misc/pci_endpoint_test.c                  |   4 +
 drivers/net/ethernet/chelsio/cxgb4/t4_hw.c        |   2 +
 drivers/net/ethernet/google/gve/gve_rx_dqo.c      |   2 +-
 drivers/net/ethernet/intel/i40e/i40e.h            |   2 +-
 drivers/net/ethernet/intel/i40e/i40e_txrx.c       |   2 +-
 drivers/net/ethernet/intel/igb/igb_ethtool.c      |   6 +-
 drivers/net/ethernet/intel/igc/igc_ethtool.c      |  35 +-
 drivers/net/ethernet/realtek/r8169_main.c         |   6 +-
 drivers/net/ethernet/toshiba/ps3_gelic_wireless.c |   2 +-
 drivers/net/gtp.c                                 |   5 +-
 drivers/net/ieee802154/adf7242.c                  |   5 +-
 drivers/net/usb/r8152.c                           |  18 +-
 drivers/net/usb/smsc95xx.c                        |   4 +-
 drivers/nvmem/imx-ocotp.c                         |   6 +-
 drivers/pci/quirks.c                              |   8 +-
 drivers/pinctrl/qcom/pinctrl-lpass-lpi.c          |  17 +-
 drivers/platform/mellanox/mlxbf-tmfifo.c          |  21 +-
 drivers/rpmsg/qcom_glink_native.c                 |   2 +
 drivers/rpmsg/rpmsg_core.c                        |  37 +-
 drivers/rpmsg/rpmsg_internal.h                    |   5 +-
 drivers/rpmsg/rpmsg_ns.c                          |   4 +-
 drivers/scsi/mpt3sas/mpt3sas_scsih.c              |   4 +-
 drivers/spi/spi-npcm-fiu.c                        |   5 +-
 drivers/tty/n_gsm.c                               |   2 +
 drivers/tty/serial/8250/8250_pci.c                | 327 +++++++++++++++-
 drivers/usb/gadget/legacy/raw_gadget.c            |  26 +-
 drivers/usb/storage/unusual_cypress.h             |   2 +-
 drivers/usb/typec/tcpm/tcpm.c                     |   3 +
 drivers/vhost/vhost.c                             |   4 +-
 drivers/video/fbdev/aty/atyfb_base.c              |   4 +
 drivers/video/fbdev/uvesafb.c                     |   2 +-
 drivers/virtio/virtio_balloon.c                   |   6 +-
 drivers/virtio/virtio_mmio.c                      |  19 +-
 fs/ext4/mballoc.c                                 |  51 ++-
 fs/ext4/mballoc.h                                 |  14 +
 fs/nfsd/vfs.c                                     |  12 +-
 fs/ntfs3/attrib.c                                 |   6 +-
 fs/ntfs3/attrlist.c                               |  15 +-
 fs/ntfs3/bitmap.c                                 |   3 +-
 fs/ntfs3/dir.c                                    |   6 +-
 fs/ntfs3/frecord.c                                |   8 +-
 fs/ntfs3/fslog.c                                  |   6 +-
 fs/ntfs3/fsntfs.c                                 |  13 +-
 fs/ntfs3/super.c                                  |   2 +-
 include/linux/device/driver.h                     |   2 +
 include/linux/iio/afe/rescale.h                   |  36 ++
 include/linux/kasan.h                             |   6 +-
 include/linux/pci_ids.h                           |   1 +
 include/linux/platform_device.h                   |   6 +-
 include/linux/rpmsg.h                             |  14 +-
 include/net/tcp.h                                 |   2 +-
 include/uapi/linux/can/isotp.h                    |  25 +-
 include/uapi/linux/gtp.h                          |   2 +-
 kernel/events/core.c                              |   3 +-
 kernel/trace/trace_kprobe.c                       |   4 +-
 mm/kasan/report.c                                 |   4 +-
 mm/migrate.c                                      |  14 +-
 mm/page_alloc.c                                   |   2 +-
 net/can/isotp.c                                   | 438 ++++++++++++++--------
 net/core/neighbour.c                              |  67 ++--
 net/ipv4/tcp.c                                    |  19 +-
 net/ipv4/tcp_input.c                              |   9 +-
 net/mptcp/protocol.c                              |  12 +-
 net/netfilter/nfnetlink_log.c                     |   2 +-
 net/sched/cls_u32.c                               |   2 +-
 net/vmw_vsock/virtio_transport.c                  | 215 +++++++----
 sound/hda/intel-dsp-config.c                      |   6 +
 sound/soc/codecs/rt5645.c                         |   2 +
 sound/soc/codecs/wcd938x.c                        |  52 ++-
 sound/soc/generic/simple-card.c                   |   6 +-
 tools/objtool/check.c                             |   2 +-
 tools/perf/util/evlist.c                          |  21 ++
 tools/perf/util/evlist.h                          |   5 +
 111 files changed, 1674 insertions(+), 678 deletions(-)

[PATCH 5.15 001/128] ASoC: codecs: wcd938x: fix resource leaks on bind errors

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan+linaro@kernel.org>

commit da29b94ed3547cee9d510d02eca4009f2de476cf upstream.

Add the missing code to release resources on bind errors, including the
references taken by wcd938x_sdw_device_get() which also need to be
dropped on unbind().

Fixes: 16572522aece ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Cc: stable@vger.kernel.org      # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231003155558.27079-4-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/codecs/wcd938x.c |   44 ++++++++++++++++++++++++++++++++++----------
 1 file changed, 34 insertions(+), 10 deletions(-)

--- a/sound/soc/codecs/wcd938x.c
+++ b/sound/soc/codecs/wcd938x.c
@@ -4411,7 +4411,8 @@ static int wcd938x_bind(struct device *d
 	wcd938x->rxdev = wcd938x_sdw_device_get(wcd938x->rxnode);
 	if (!wcd938x->rxdev) {
 		dev_err(dev, "could not find slave with matching of node\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err_unbind;
 	}
 	wcd938x->sdw_priv[AIF1_PB] = dev_get_drvdata(wcd938x->rxdev);
 	wcd938x->sdw_priv[AIF1_PB]->wcd938x = wcd938x;
@@ -4419,7 +4420,8 @@ static int wcd938x_bind(struct device *d
 	wcd938x->txdev = wcd938x_sdw_device_get(wcd938x->txnode);
 	if (!wcd938x->txdev) {
 		dev_err(dev, "could not find txslave with matching of node\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err_put_rxdev;
 	}
 	wcd938x->sdw_priv[AIF1_CAP] = dev_get_drvdata(wcd938x->txdev);
 	wcd938x->sdw_priv[AIF1_CAP]->wcd938x = wcd938x;
@@ -4430,31 +4432,35 @@ static int wcd938x_bind(struct device *d
 	if (!device_link_add(wcd938x->rxdev, wcd938x->txdev, DL_FLAG_STATELESS |
 			    DL_FLAG_PM_RUNTIME)) {
 		dev_err(dev, "could not devlink tx and rx\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err_put_txdev;
 	}
 
 	if (!device_link_add(dev, wcd938x->txdev, DL_FLAG_STATELESS |
 					DL_FLAG_PM_RUNTIME)) {
 		dev_err(dev, "could not devlink wcd and tx\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err_remove_rxtx_link;
 	}
 
 	if (!device_link_add(dev, wcd938x->rxdev, DL_FLAG_STATELESS |
 					DL_FLAG_PM_RUNTIME)) {
 		dev_err(dev, "could not devlink wcd and rx\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err_remove_tx_link;
 	}
 
 	wcd938x->regmap = devm_regmap_init_sdw(wcd938x->tx_sdw_dev, &wcd938x_regmap_config);
 	if (IS_ERR(wcd938x->regmap)) {
 		dev_err(dev, "%s: tx csr regmap not found\n", __func__);
-		return PTR_ERR(wcd938x->regmap);
+		ret = PTR_ERR(wcd938x->regmap);
+		goto err_remove_rx_link;
 	}
 
 	ret = wcd938x_irq_init(wcd938x, dev);
 	if (ret) {
 		dev_err(dev, "%s: IRQ init failed: %d\n", __func__, ret);
-		return ret;
+		goto err_remove_rx_link;
 	}
 
 	wcd938x->sdw_priv[AIF1_PB]->slave_irq = wcd938x->virq;
@@ -4463,17 +4469,33 @@ static int wcd938x_bind(struct device *d
 	ret = wcd938x_set_micbias_data(wcd938x);
 	if (ret < 0) {
 		dev_err(dev, "%s: bad micbias pdata\n", __func__);
-		return ret;
+		goto err_remove_rx_link;
 	}
 
 	ret = snd_soc_register_component(dev, &soc_codec_dev_wcd938x,
 					 wcd938x_dais, ARRAY_SIZE(wcd938x_dais));
-	if (ret)
+	if (ret) {
 		dev_err(dev, "%s: Codec registration failed\n",
 				__func__);
+		goto err_remove_rx_link;
+	}
 
-	return ret;
+	return 0;
 
+err_remove_rx_link:
+	device_link_remove(dev, wcd938x->rxdev);
+err_remove_tx_link:
+	device_link_remove(dev, wcd938x->txdev);
+err_remove_rxtx_link:
+	device_link_remove(wcd938x->rxdev, wcd938x->txdev);
+err_put_txdev:
+	put_device(wcd938x->txdev);
+err_put_rxdev:
+	put_device(wcd938x->rxdev);
+err_unbind:
+	component_unbind_all(dev, wcd938x);
+
+	return ret;
 }
 
 static void wcd938x_unbind(struct device *dev)
@@ -4484,6 +4506,8 @@ static void wcd938x_unbind(struct device
 	device_link_remove(dev, wcd938x->txdev);
 	device_link_remove(dev, wcd938x->rxdev);
 	device_link_remove(wcd938x->rxdev, wcd938x->txdev);
+	put_device(wcd938x->txdev);
+	put_device(wcd938x->rxdev);
 	component_unbind_all(dev, wcd938x);
 }
 

[PATCH 5.15 002/128] ASoC: codecs: wcd938x: fix runtime PM imbalance on remove

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan+linaro@kernel.org>

[ Upstream commit 3ebebb2c1eca92a15107b2d7aeff34196fd9e217 ]

Make sure to balance the runtime PM operations, including the disable
count, on driver unbind.

Fixes: 16572522aece ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Cc: stable@vger.kernel.org      # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231003155558.27079-6-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/codecs/wcd938x.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/sound/soc/codecs/wcd938x.c
+++ b/sound/soc/codecs/wcd938x.c
@@ -4598,7 +4598,13 @@ static int wcd938x_probe(struct platform
 
 static int wcd938x_remove(struct platform_device *pdev)
 {
-	component_master_del(&pdev->dev, &wcd938x_comp_ops);
+	struct device *dev = &pdev->dev;
+
+	component_master_del(dev, &wcd938x_comp_ops);
+
+	pm_runtime_disable(dev);
+	pm_runtime_set_suspended(dev);
+	pm_runtime_dont_use_autosuspend(dev);
 
 	return 0;
 }

[PATCH 5.15 003/128] pinctrl: qcom: lpass-lpi: fix concurrent register updates

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit c8befdc411e5fd1bf95a13e8744c8ca79b412bee ]

The Qualcomm LPASS LPI pin controller driver uses one lock for guarding
Read-Modify-Write code for slew rate registers.  However the pin
configuration and muxing registers have exactly the same RMW code but
are not protected.

Pin controller framework does not provide locking here, thus it is
possible to trigger simultaneous change of pin configuration registers
resulting in non-atomic changes.

Protect from concurrent access by re-using the same lock used to cover
the slew rate register.  Using the same lock instead of adding second
one will make more sense, once we add support for newer Qualcomm SoC,
where slew rate is configured in the same register as pin
configuration/muxing.

Fixes: 6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver")
Cc: stable@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231013145705.219954-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
index dd1c9fd733c8f..ec37ad43a6364 100644
--- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
@@ -102,7 +102,8 @@ struct lpi_pinctrl {
 	char __iomem *tlmm_base;
 	char __iomem *slew_base;
 	struct clk_bulk_data clks[MAX_LPI_NUM_CLKS];
-	struct mutex slew_access_lock;
+	/* Protects from concurrent register updates */
+	struct mutex lock;
 	const struct lpi_pinctrl_variant_data *data;
 };
 
@@ -330,9 +331,11 @@ static int lpi_gpio_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
 	if (WARN_ON(i == g->nfuncs))
 		return -EINVAL;
 
+	mutex_lock(&pctrl->lock);
 	val = lpi_gpio_read(pctrl, pin, LPI_GPIO_CFG_REG);
 	u32p_replace_bits(&val, i, LPI_GPIO_FUNCTION_MASK);
 	lpi_gpio_write(pctrl, pin, LPI_GPIO_CFG_REG, val);
+	mutex_unlock(&pctrl->lock);
 
 	return 0;
 }
@@ -438,14 +441,14 @@ static int lpi_config_set(struct pinctrl_dev *pctldev, unsigned int group,
 			if (slew_offset == NO_SLEW)
 				break;
 
-			mutex_lock(&pctrl->slew_access_lock);
+			mutex_lock(&pctrl->lock);
 
 			sval = ioread32(pctrl->slew_base + LPI_SLEW_RATE_CTL_REG);
 			sval &= ~(LPI_SLEW_RATE_MASK << slew_offset);
 			sval |= arg << slew_offset;
 			iowrite32(sval, pctrl->slew_base + LPI_SLEW_RATE_CTL_REG);
 
-			mutex_unlock(&pctrl->slew_access_lock);
+			mutex_unlock(&pctrl->lock);
 			break;
 		default:
 			return -EINVAL;
@@ -461,6 +464,7 @@ static int lpi_config_set(struct pinctrl_dev *pctldev, unsigned int group,
 		lpi_gpio_write(pctrl, group, LPI_GPIO_VALUE_REG, val);
 	}
 
+	mutex_lock(&pctrl->lock);
 	val = lpi_gpio_read(pctrl, group, LPI_GPIO_CFG_REG);
 
 	u32p_replace_bits(&val, pullup, LPI_GPIO_PULL_MASK);
@@ -469,6 +473,7 @@ static int lpi_config_set(struct pinctrl_dev *pctldev, unsigned int group,
 	u32p_replace_bits(&val, output_enabled, LPI_GPIO_OE_MASK);
 
 	lpi_gpio_write(pctrl, group, LPI_GPIO_CFG_REG, val);
+	mutex_unlock(&pctrl->lock);
 
 	return 0;
 }
@@ -642,7 +647,7 @@ static int lpi_pinctrl_probe(struct platform_device *pdev)
 	pctrl->chip.of_gpio_n_cells = 2;
 	pctrl->chip.can_sleep = false;
 
-	mutex_init(&pctrl->slew_access_lock);
+	mutex_init(&pctrl->lock);
 
 	pctrl->ctrl = devm_pinctrl_register(dev, &pctrl->desc, pctrl);
 	if (IS_ERR(pctrl->ctrl)) {
@@ -660,7 +665,7 @@ static int lpi_pinctrl_probe(struct platform_device *pdev)
 	return 0;
 
 err_pinctrl:
-	mutex_destroy(&pctrl->slew_access_lock);
+	mutex_destroy(&pctrl->lock);
 	clk_bulk_disable_unprepare(MAX_LPI_NUM_CLKS, pctrl->clks);
 
 	return ret;
@@ -670,7 +675,7 @@ static int lpi_pinctrl_remove(struct platform_device *pdev)
 {
 	struct lpi_pinctrl *pctrl = platform_get_drvdata(pdev);
 
-	mutex_destroy(&pctrl->slew_access_lock);
+	mutex_destroy(&pctrl->lock);
 	clk_bulk_disable_unprepare(MAX_LPI_NUM_CLKS, pctrl->clks);
 
 	return 0;
-- 
2.42.0

[PATCH 5.15 004/128] tcp: remove dead code from tcp_sendmsg_locked()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 3ded97bc41a1e76e1e72eeb192331c01ceacc4bc ]

TCP sendmsg() no longer puts payload in skb head, we can remove
dead code.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 72377ab2d671 ("mptcp: more conservative check for zero probes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index a91cf000bb61b..2115a0e5c98f7 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -1330,14 +1330,7 @@ int tcp_sendmsg_locked(struct sock *sk, struct msghdr *msg, size_t size)
 		if (copy > msg_data_left(msg))
 			copy = msg_data_left(msg);
 
-		/* Where to copy to? */
-		if (skb_availroom(skb) > 0 && !zc) {
-			/* We have some space in skb head. Superb! */
-			copy = min_t(int, copy, skb_availroom(skb));
-			err = skb_add_data_nocache(sk, skb, &msg->msg_iter, copy);
-			if (err)
-				goto do_fault;
-		} else if (!zc) {
+		if (!zc) {
 			bool merge = true;
 			int i = skb_shinfo(skb)->nr_frags;
 			struct page_frag *pfrag = sk_page_frag(sk);
@@ -1437,7 +1430,6 @@ int tcp_sendmsg_locked(struct sock *sk, struct msghdr *msg, size_t size)
 
 do_error:
 	skb = tcp_write_queue_tail(sk);
-do_fault:
 	tcp_remove_empty_skb(sk, skb);
 
 	if (copied + copied_syn)
-- 
2.42.0

[PATCH 5.15 005/128] tcp: cleanup tcp_remove_empty_skb() use

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 27728ba80f1eb279b209bbd5922fdeebe52d9e30 ]

All tcp_remove_empty_skb() callers now use tcp_write_queue_tail()
for the skb argument, we can therefore factorize code.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 72377ab2d671 ("mptcp: more conservative check for zero probes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/tcp.h    | 2 +-
 net/ipv4/tcp.c       | 9 +++++----
 net/mptcp/protocol.c | 4 ++--
 3 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/include/net/tcp.h b/include/net/tcp.h
index e93a48edf438c..3aee02ad0116b 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -314,7 +314,7 @@ void tcp_shutdown(struct sock *sk, int how);
 int tcp_v4_early_demux(struct sk_buff *skb);
 int tcp_v4_rcv(struct sk_buff *skb);
 
-void tcp_remove_empty_skb(struct sock *sk, struct sk_buff *skb);
+void tcp_remove_empty_skb(struct sock *sk);
 int tcp_v4_tw_remember_stamp(struct inet_timewait_sock *tw);
 int tcp_sendmsg(struct sock *sk, struct msghdr *msg, size_t size);
 int tcp_sendmsg_locked(struct sock *sk, struct msghdr *msg, size_t size);
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 2115a0e5c98f7..6dcb77a2bde60 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -953,8 +953,10 @@ int tcp_send_mss(struct sock *sk, int *size_goal, int flags)
  * importantly be able to generate EPOLLOUT for Edge Trigger epoll()
  * users.
  */
-void tcp_remove_empty_skb(struct sock *sk, struct sk_buff *skb)
+void tcp_remove_empty_skb(struct sock *sk)
 {
+	struct sk_buff *skb = tcp_write_queue_tail(sk);
+
 	if (skb && TCP_SKB_CB(skb)->seq == TCP_SKB_CB(skb)->end_seq) {
 		tcp_unlink_write_queue(skb, sk);
 		if (tcp_write_queue_empty(sk))
@@ -1107,7 +1109,7 @@ ssize_t do_tcp_sendpages(struct sock *sk, struct page *page, int offset,
 	return copied;
 
 do_error:
-	tcp_remove_empty_skb(sk, tcp_write_queue_tail(sk));
+	tcp_remove_empty_skb(sk);
 	if (copied)
 		goto out;
 out_err:
@@ -1429,8 +1431,7 @@ int tcp_sendmsg_locked(struct sock *sk, struct msghdr *msg, size_t size)
 	return copied + copied_syn;
 
 do_error:
-	skb = tcp_write_queue_tail(sk);
-	tcp_remove_empty_skb(sk, skb);
+	tcp_remove_empty_skb(sk);
 
 	if (copied + copied_syn)
 		goto out;
diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c
index 82b1583f709d3..b9613e02e2de1 100644
--- a/net/mptcp/protocol.c
+++ b/net/mptcp/protocol.c
@@ -1338,7 +1338,7 @@ static int mptcp_sendmsg_frag(struct sock *sk, struct sock *ssk,
 		u64 snd_una = READ_ONCE(msk->snd_una);
 
 		if (snd_una != msk->snd_nxt) {
-			tcp_remove_empty_skb(ssk, tcp_write_queue_tail(ssk));
+			tcp_remove_empty_skb(ssk);
 			return 0;
 		}
 
@@ -1354,7 +1354,7 @@ static int mptcp_sendmsg_frag(struct sock *sk, struct sock *ssk,
 
 	copy = min_t(size_t, copy, info->limit - info->sent);
 	if (!sk_wmem_schedule(ssk, copy)) {
-		tcp_remove_empty_skb(ssk, tcp_write_queue_tail(ssk));
+		tcp_remove_empty_skb(ssk);
 		return -ENOMEM;
 	}
 
-- 
2.42.0

[PATCH 5.15 006/128] mptcp: more conservative check for zero probes

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paolo Abeni <pabeni@redhat.com>

[ Upstream commit 72377ab2d671befd6390a1d5677f5cca61235b65 ]

Christoph reported that the MPTCP protocol can find the subflow-level
write queue unexpectedly not empty while crafting a zero-window probe,
hitting a warning:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 188 at net/mptcp/protocol.c:1312 mptcp_sendmsg_frag+0xc06/0xe70
Modules linked in:
CPU: 0 PID: 188 Comm: kworker/0:2 Not tainted 6.6.0-rc2-g1176aa719d7a #47
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
Workqueue: events mptcp_worker
RIP: 0010:mptcp_sendmsg_frag+0xc06/0xe70 net/mptcp/protocol.c:1312
RAX: 47d0530de347ff6a RBX: 47d0530de347ff6b RCX: ffff8881015d3c00
RDX: ffff8881015d3c00 RSI: 47d0530de347ff6b RDI: 47d0530de347ff6b
RBP: 47d0530de347ff6b R08: ffffffff8243c6a8 R09: ffffffff82042d9c
R10: 0000000000000002 R11: ffffffff82056850 R12: ffff88812a13d580
R13: 0000000000000001 R14: ffff88812b375e50 R15: ffff88812bbf3200
FS:  0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000695118 CR3: 0000000115dfc001 CR4: 0000000000170ef0
Call Trace:
 <TASK>
 __subflow_push_pending+0xa4/0x420 net/mptcp/protocol.c:1545
 __mptcp_push_pending+0x128/0x3b0 net/mptcp/protocol.c:1614
 mptcp_release_cb+0x218/0x5b0 net/mptcp/protocol.c:3391
 release_sock+0xf6/0x100 net/core/sock.c:3521
 mptcp_worker+0x6e8/0x8f0 net/mptcp/protocol.c:2746
 process_scheduled_works+0x341/0x690 kernel/workqueue.c:2630
 worker_thread+0x3a7/0x610 kernel/workqueue.c:2784
 kthread+0x143/0x180 kernel/kthread.c:388
 ret_from_fork+0x4d/0x60 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:304
 </TASK>

The root cause of the issue is that expectations are wrong: e.g. due
to MPTCP-level re-injection we can hit the critical condition.

Explicitly avoid the zero-window probe when the subflow write queue
is not empty and drop the related warnings.

Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/444
Fixes: f70cad1085d1 ("mptcp: stop relying on tcp_tx_skb_cache")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-3-17ecb002e41d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mptcp/protocol.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c
index b9613e02e2de1..62e1875b92904 100644
--- a/net/mptcp/protocol.c
+++ b/net/mptcp/protocol.c
@@ -1337,7 +1337,7 @@ static int mptcp_sendmsg_frag(struct sock *sk, struct sock *ssk,
 	if (copy == 0) {
 		u64 snd_una = READ_ONCE(msk->snd_una);
 
-		if (snd_una != msk->snd_nxt) {
+		if (snd_una != msk->snd_nxt || tcp_write_queue_tail(ssk)) {
 			tcp_remove_empty_skb(ssk);
 			return 0;
 		}
@@ -1345,11 +1345,6 @@ static int mptcp_sendmsg_frag(struct sock *sk, struct sock *ssk,
 		zero_window_probe = true;
 		data_seq = snd_una - 1;
 		copy = 1;
-
-		/* all mptcp-level data is acked, no skbs should be present into the
-		 * ssk write queue
-		 */
-		WARN_ON_ONCE(reuse_skb);
 	}
 
 	copy = min_t(size_t, copy, info->limit - info->sent);
@@ -1379,7 +1374,6 @@ static int mptcp_sendmsg_frag(struct sock *sk, struct sock *ssk,
 	if (reuse_skb) {
 		TCP_SKB_CB(skb)->tcp_flags &= ~TCPHDR_PSH;
 		mpext->data_len += copy;
-		WARN_ON_ONCE(zero_window_probe);
 		goto out;
 	}
 
-- 
2.42.0

[PATCH 5.15 007/128] mcb: Return actual parsed size when reading chameleon table

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rodríguez Barbarin, José Javier <JoseJavier.Rodriguez@duagon.com>

[ Upstream commit a889c276d33d333ae96697510f33533f6e9d9591 ]

The function chameleon_parse_cells() returns the number of cells
parsed which has an undetermined size. This return value is only
used for error checking but the number of cells is never used.

Change return value to be number of bytes parsed to allow for
memory management improvements.

Co-developed-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Signed-off-by: Javier Rodriguez <josejavier.rodriguez@duagon.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/20230411083329.4506-2-jth@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mcb/mcb-parse.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/mcb/mcb-parse.c b/drivers/mcb/mcb-parse.c
index c41cbacc75a2c..656b6b71c7682 100644
--- a/drivers/mcb/mcb-parse.c
+++ b/drivers/mcb/mcb-parse.c
@@ -128,7 +128,7 @@ static void chameleon_parse_bar(void __iomem *base,
 	}
 }
 
-static int chameleon_get_bar(char __iomem **base, phys_addr_t mapbase,
+static int chameleon_get_bar(void __iomem **base, phys_addr_t mapbase,
 			     struct chameleon_bar **cb)
 {
 	struct chameleon_bar *c;
@@ -177,12 +177,13 @@ int chameleon_parse_cells(struct mcb_bus *bus, phys_addr_t mapbase,
 {
 	struct chameleon_fpga_header *header;
 	struct chameleon_bar *cb;
-	char __iomem *p = base;
+	void __iomem *p = base;
 	int num_cells = 0;
 	uint32_t dtype;
 	int bar_count;
 	int ret;
 	u32 hsize;
+	u32 table_size;
 
 	hsize = sizeof(struct chameleon_fpga_header);
 
@@ -237,12 +238,16 @@ int chameleon_parse_cells(struct mcb_bus *bus, phys_addr_t mapbase,
 		num_cells++;
 	}
 
-	if (num_cells == 0)
-		num_cells = -EINVAL;
+	if (num_cells == 0) {
+		ret = -EINVAL;
+		goto free_bar;
+	}
 
+	table_size = p - base;
+	pr_debug("%d cell(s) found. Chameleon table size: 0x%04x bytes\n", num_cells, table_size);
 	kfree(cb);
 	kfree(header);
-	return num_cells;
+	return table_size;
 
 free_bar:
 	kfree(cb);
-- 
2.42.0

[PATCH 5.15 008/128] mcb-lpc: Reallocate memory region to avoid memory overlapping

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rodríguez Barbarin, José Javier <JoseJavier.Rodriguez@duagon.com>

[ Upstream commit 2025b2ca8004c04861903d076c67a73a0ec6dfca ]

mcb-lpc requests a fixed-size memory region to parse the chameleon
table, however, if the chameleon table is smaller that the allocated
region, it could overlap with the IP Cores' memory regions.

After parsing the chameleon table, drop/reallocate the memory region
with the actual chameleon table size.

Co-developed-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Signed-off-by: Javier Rodriguez <josejavier.rodriguez@duagon.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/20230411083329.4506-4-jth@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mcb/mcb-lpc.c | 35 +++++++++++++++++++++++++++++++----
 1 file changed, 31 insertions(+), 4 deletions(-)

diff --git a/drivers/mcb/mcb-lpc.c b/drivers/mcb/mcb-lpc.c
index 53decd89876ee..a851e02364642 100644
--- a/drivers/mcb/mcb-lpc.c
+++ b/drivers/mcb/mcb-lpc.c
@@ -23,7 +23,7 @@ static int mcb_lpc_probe(struct platform_device *pdev)
 {
 	struct resource *res;
 	struct priv *priv;
-	int ret = 0;
+	int ret = 0, table_size;
 
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
@@ -58,16 +58,43 @@ static int mcb_lpc_probe(struct platform_device *pdev)
 
 	ret = chameleon_parse_cells(priv->bus, priv->mem->start, priv->base);
 	if (ret < 0) {
-		mcb_release_bus(priv->bus);
-		return ret;
+		goto out_mcb_bus;
 	}
 
-	dev_dbg(&pdev->dev, "Found %d cells\n", ret);
+	table_size = ret;
+
+	if (table_size < CHAM_HEADER_SIZE) {
+		/* Release the previous resources */
+		devm_iounmap(&pdev->dev, priv->base);
+		devm_release_mem_region(&pdev->dev, priv->mem->start, resource_size(priv->mem));
+
+		/* Then, allocate it again with the actual chameleon table size */
+		res = devm_request_mem_region(&pdev->dev, priv->mem->start,
+					      table_size,
+					      KBUILD_MODNAME);
+		if (!res) {
+			dev_err(&pdev->dev, "Failed to request PCI memory\n");
+			ret = -EBUSY;
+			goto out_mcb_bus;
+		}
+
+		priv->base = devm_ioremap(&pdev->dev, priv->mem->start, table_size);
+		if (!priv->base) {
+			dev_err(&pdev->dev, "Cannot ioremap\n");
+			ret = -ENOMEM;
+			goto out_mcb_bus;
+		}
+
+		platform_set_drvdata(pdev, priv);
+	}
 
 	mcb_bus_add_devices(priv->bus);
 
 	return 0;
 
+out_mcb_bus:
+	mcb_release_bus(priv->bus);
+	return ret;
 }
 
 static int mcb_lpc_remove(struct platform_device *pdev)
-- 
2.42.0

[PATCH 5.15 009/128] virtio_balloon: Fix endless deflation and inflation on arm64

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gavin Shan <gshan@redhat.com>

commit 07622bd415639e9709579f400afd19e7e9866e5e upstream.

The deflation request to the target, which isn't unaligned to the
guest page size causes endless deflation and inflation actions. For
example, we receive the flooding QMP events for the changes on memory
balloon's size after a deflation request to the unaligned target is
sent for the ARM64 guest, where we have 64KB base page size.

  /home/gavin/sandbox/qemu.main/build/qemu-system-aarch64      \
  -accel kvm -machine virt,gic-version=host -cpu host          \
  -smp maxcpus=8,cpus=8,sockets=2,clusters=2,cores=2,threads=1 \
  -m 1024M,slots=16,maxmem=64G                                 \
  -object memory-backend-ram,id=mem0,size=512M                 \
  -object memory-backend-ram,id=mem1,size=512M                 \
  -numa node,nodeid=0,memdev=mem0,cpus=0-3                     \
  -numa node,nodeid=1,memdev=mem1,cpus=4-7                     \
    :                                                          \
  -device virtio-balloon-pci,id=balloon0,bus=pcie.10

  { "execute" : "balloon", "arguments": { "value" : 1073672192 } }
  {"return": {}}
  {"timestamp": {"seconds": 1693272173, "microseconds": 88667},   \
   "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}}
  {"timestamp": {"seconds": 1693272174, "microseconds": 89704},   \
   "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}}
  {"timestamp": {"seconds": 1693272175, "microseconds": 90819},   \
   "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}}
  {"timestamp": {"seconds": 1693272176, "microseconds": 91961},   \
   "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}}
  {"timestamp": {"seconds": 1693272177, "microseconds": 93040},   \
   "event": "BALLOON_CHANGE", "data": {"actual": 1073676288}}
  {"timestamp": {"seconds": 1693272178, "microseconds": 94117},   \
   "event": "BALLOON_CHANGE", "data": {"actual": 1073676288}}
  {"timestamp": {"seconds": 1693272179, "microseconds": 95337},   \
   "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}}
  {"timestamp": {"seconds": 1693272180, "microseconds": 96615},   \
   "event": "BALLOON_CHANGE", "data": {"actual": 1073676288}}
  {"timestamp": {"seconds": 1693272181, "microseconds": 97626},   \
   "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}}
  {"timestamp": {"seconds": 1693272182, "microseconds": 98693},   \
   "event": "BALLOON_CHANGE", "data": {"actual": 1073676288}}
  {"timestamp": {"seconds": 1693272183, "microseconds": 99698},   \
   "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}}
  {"timestamp": {"seconds": 1693272184, "microseconds": 100727},  \
   "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}}
  {"timestamp": {"seconds": 1693272185, "microseconds": 90430},   \
   "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}}
  {"timestamp": {"seconds": 1693272186, "microseconds": 102999},  \
   "event": "BALLOON_CHANGE", "data": {"actual": 1073676288}}
     :
  <The similar QMP events repeat>

Fix it by aligning the target up to the guest page size, 64KB in this
specific case. With this applied, no flooding QMP events are observed
and the memory balloon's size can be stablizied to 0x3ffe0000 soon
after the deflation request is sent.

  { "execute" : "balloon", "arguments": { "value" : 1073672192 } }
  {"return": {}}
  {"timestamp": {"seconds": 1693273328, "microseconds": 793075},  \
   "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}}
  { "execute" : "query-balloon" }
  {"return": {"actual": 1073610752}}

Cc: stable@vger.kernel.org
Signed-off-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-Id: <20230831011007.1032822-1-gshan@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/virtio/virtio_balloon.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -402,7 +402,11 @@ static inline s64 towards_target(struct
 	virtio_cread_le(vb->vdev, struct virtio_balloon_config, num_pages,
 			&num_pages);
 
-	target = num_pages;
+	/*
+	 * Aligned up to guest page size to avoid inflating and deflating
+	 * balloon endlessly.
+	 */
+	target = ALIGN(num_pages, VIRTIO_BALLOON_PAGES_PER_PAGE);
 	return target - vb->num_pages;
 }
 

[PATCH 5.15 010/128] virtio-mmio: fix memory leak of vm_dev

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maximilian Heyne <mheyne@amazon.de>

commit fab7f259227b8f70aa6d54e1de1a1f5f4729041c upstream.

With the recent removal of vm_dev from devres its memory is only freed
via the callback virtio_mmio_release_dev. However, this only takes
effect after device_add is called by register_virtio_device. Until then
it's an unmanaged resource and must be explicitly freed on error exit.

This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.

Cc: stable@vger.kernel.org
Fixes: 55c91fedd03d ("virtio-mmio: don't break lifecycle of vm_dev")
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Message-Id: <20230911090328.40538-1-mheyne@amazon.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 drivers/virtio/virtio_mmio.c |   19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

--- a/drivers/virtio/virtio_mmio.c
+++ b/drivers/virtio/virtio_mmio.c
@@ -596,14 +596,17 @@ static int virtio_mmio_probe(struct plat
 	spin_lock_init(&vm_dev->lock);
 
 	vm_dev->base = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(vm_dev->base))
-		return PTR_ERR(vm_dev->base);
+	if (IS_ERR(vm_dev->base)) {
+		rc = PTR_ERR(vm_dev->base);
+		goto free_vm_dev;
+	}
 
 	/* Check magic value */
 	magic = readl(vm_dev->base + VIRTIO_MMIO_MAGIC_VALUE);
 	if (magic != ('v' | 'i' << 8 | 'r' << 16 | 't' << 24)) {
 		dev_warn(&pdev->dev, "Wrong magic value 0x%08lx!\n", magic);
-		return -ENODEV;
+		rc = -ENODEV;
+		goto free_vm_dev;
 	}
 
 	/* Check device version */
@@ -611,7 +614,8 @@ static int virtio_mmio_probe(struct plat
 	if (vm_dev->version < 1 || vm_dev->version > 2) {
 		dev_err(&pdev->dev, "Version %ld not supported!\n",
 				vm_dev->version);
-		return -ENXIO;
+		rc = -ENXIO;
+		goto free_vm_dev;
 	}
 
 	vm_dev->vdev.id.device = readl(vm_dev->base + VIRTIO_MMIO_DEVICE_ID);
@@ -620,7 +624,8 @@ static int virtio_mmio_probe(struct plat
 		 * virtio-mmio device with an ID 0 is a (dummy) placeholder
 		 * with no function. End probing now with no error reported.
 		 */
-		return -ENODEV;
+		rc = -ENODEV;
+		goto free_vm_dev;
 	}
 	vm_dev->vdev.id.vendor = readl(vm_dev->base + VIRTIO_MMIO_VENDOR_ID);
 
@@ -650,6 +655,10 @@ static int virtio_mmio_probe(struct plat
 		put_device(&vm_dev->vdev.dev);
 
 	return rc;
+
+free_vm_dev:
+	kfree(vm_dev);
+	return rc;
 }
 
 static int virtio_mmio_remove(struct platform_device *pdev)

[PATCH 5.15 011/128] vhost: Allow null msg.size on VHOST_IOTLB_INVALIDATE

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Auger <eric.auger@redhat.com>

commit ca50ec377c2e94b0a9f8735de2856cd0f13beab4 upstream.

Commit e2ae38cf3d91 ("vhost: fix hung thread due to erroneous iotlb
entries") Forbade vhost iotlb msg with null size to prevent entries
with size = start = 0 and last = ULONG_MAX to end up in the iotlb.

Then commit 95932ab2ea07 ("vhost: allow batching hint without size")
only applied the check for VHOST_IOTLB_UPDATE and VHOST_IOTLB_INVALIDATE
message types to fix a regression observed with batching hit.

Still, the introduction of that check introduced a regression for
some users attempting to invalidate the whole ULONG_MAX range by
setting the size to 0. This is the case with qemu/smmuv3/vhost
integration which does not work anymore. It Looks safe to partially
revert the original commit and allow VHOST_IOTLB_INVALIDATE messages
with null size. vhost_iotlb_del_range() will compute a correct end
iova. Same for vhost_vdpa_iotlb_unmap().

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Fixes: e2ae38cf3d91 ("vhost: fix hung thread due to erroneous iotlb entries")
Cc: stable@vger.kernel.org # v5.17+
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230927140544.205088-1-eric.auger@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/vhost/vhost.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -1171,9 +1171,7 @@ ssize_t vhost_chr_write_iter(struct vhos
 		goto done;
 	}
 
-	if ((msg.type == VHOST_IOTLB_UPDATE ||
-	     msg.type == VHOST_IOTLB_INVALIDATE) &&
-	     msg.size == 0) {
+	if (msg.type == VHOST_IOTLB_UPDATE && msg.size == 0) {
 		ret = -EINVAL;
 		goto done;
 	}

[PATCH 5.15 012/128] mm/page_alloc: correct start page when guard page debug is enabled

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kemeng Shi <shikemeng@huaweicloud.com>

commit 61e21cf2d2c3cc5e60e8d0a62a77e250fccda62c upstream.

When guard page debug is enabled and set_page_guard returns success, we
miss to forward page to point to start of next split range and we will do
split unexpectedly in page range without target page.  Move start page
update before set_page_guard to fix this.

As we split to wrong target page, then splited pages are not able to merge
back to original order when target page is put back and splited pages
except target page is not usable.  To be specific:

Consider target page is the third page in buddy page with order 2.
| buddy-2 | Page | Target | Page |

After break down to target page, we will only set first page to Guard
because of bug.
| Guard   | Page | Target | Page |

When we try put_page_back_buddy with target page, the buddy page of target
if neither guard nor buddy, Then it's not able to construct original page
with order 2
| Guard | Page | buddy-0 | Page |

All pages except target page is not in free list and is not usable.

Link: https://lkml.kernel.org/r/20230927094401.68205-1-shikemeng@huaweicloud.com
Fixes: 06be6ff3d2ec ("mm,hwpoison: rework soft offline for free pages")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/page_alloc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -9481,6 +9481,7 @@ static void break_down_buddy_pages(struc
 			next_page = page;
 			current_buddy = page + size;
 		}
+		page = next_page;
 
 		if (set_page_guard(zone, current_buddy, high, migratetype))
 			continue;
@@ -9488,7 +9489,6 @@ static void break_down_buddy_pages(struc
 		if (current_buddy != target) {
 			add_to_free_list(current_buddy, zone, high, migratetype);
 			set_buddy_order(current_buddy, high);
-			page = next_page;
 		}
 	}
 }

[PATCH 5.15 013/128] mm/migrate: fix do_pages_move for compat pointers

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gregory Price <gourry.memverge@gmail.com>

commit 229e2253766c7cdfe024f1fe280020cc4711087c upstream.

do_pages_move does not handle compat pointers for the page list.
correctly.  Add in_compat_syscall check and appropriate get_user fetch
when iterating the page list.

It makes the syscall in compat mode (32-bit userspace, 64-bit kernel)
work the same way as the native 32-bit syscall again, restoring the
behavior before my broken commit 5b1b561ba73c ("mm: simplify
compat_sys_move_pages").

More specifically, my patch moved the parsing of the 'pages' array from
the main entry point into do_pages_stat(), which left the syscall
working correctly for the 'stat' operation (nodes = NULL), while the
'move' operation (nodes != NULL) is now missing the conversion and
interprets 'pages' as an array of 64-bit pointers instead of the
intended 32-bit userspace pointers.

It is possible that nobody noticed this bug because the few
applications that actually call move_pages are unlikely to run in
compat mode because of their large memory requirements, but this
clearly fixes a user-visible regression and should have been caught by
ltp.

Link: https://lkml.kernel.org/r/20231003144857.752952-1-gregory.price@memverge.com
Fixes: 5b1b561ba73c ("mm: simplify compat_sys_move_pages")
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/migrate.c |   14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -1788,6 +1788,7 @@ static int do_pages_move(struct mm_struc
 			 const int __user *nodes,
 			 int __user *status, int flags)
 {
+	compat_uptr_t __user *compat_pages = (void __user *)pages;
 	int current_node = NUMA_NO_NODE;
 	LIST_HEAD(pagelist);
 	int start, i;
@@ -1801,8 +1802,17 @@ static int do_pages_move(struct mm_struc
 		int node;
 
 		err = -EFAULT;
-		if (get_user(p, pages + i))
-			goto out_flush;
+		if (in_compat_syscall()) {
+			compat_uptr_t cp;
+
+			if (get_user(cp, compat_pages + i))
+				goto out_flush;
+
+			p = compat_ptr(cp);
+		} else {
+			if (get_user(p, pages + i))
+				goto out_flush;
+		}
 		if (get_user(node, nodes + i))
 			goto out_flush;
 		addr = (unsigned long)untagged_addr(p);

[PATCH 5.15 014/128] nfsd: lock_rename() needs both directories to live on the same fs

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Al Viro <viro@zeniv.linux.org.uk>

commit 1aee9158bc978f91701c5992e395efbc6da2de3c upstream.

... checking that after lock_rename() is too late.  Incidentally,
NFSv2 had no nfserr_xdev...

Fixes: aa387d6ce153 "nfsd: fix EXDEV checking in rename"
Cc: stable@vger.kernel.org # v3.9+
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfsd/vfs.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -1762,6 +1762,12 @@ nfsd_rename(struct svc_rqst *rqstp, stru
 	if (!flen || isdotent(fname, flen) || !tlen || isdotent(tname, tlen))
 		goto out;
 
+	err = (rqstp->rq_vers == 2) ? nfserr_acces : nfserr_xdev;
+	if (ffhp->fh_export->ex_path.mnt != tfhp->fh_export->ex_path.mnt)
+		goto out;
+	if (ffhp->fh_export->ex_path.dentry != tfhp->fh_export->ex_path.dentry)
+		goto out;
+
 retry:
 	host_err = fh_want_write(ffhp);
 	if (host_err) {
@@ -1796,12 +1802,6 @@ retry:
 	if (ndentry == trap)
 		goto out_dput_new;
 
-	host_err = -EXDEV;
-	if (ffhp->fh_export->ex_path.mnt != tfhp->fh_export->ex_path.mnt)
-		goto out_dput_new;
-	if (ffhp->fh_export->ex_path.dentry != tfhp->fh_export->ex_path.dentry)
-		goto out_dput_new;
-
 	if ((ndentry->d_sb->s_export_op->flags & EXPORT_OP_CLOSE_BEFORE_UNLINK) &&
 	    nfsd_has_cached_files(ndentry)) {
 		close_cached = true;

[PATCH 5.15 015/128] drm/i915/pmu: Check if pmu is closed before stopping event

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>

commit 4cbed7702eb775cca22fff6827a549092cb59f61 upstream.

When the driver unbinds, pmu is unregistered and i915->uabi_engines is
set to RB_ROOT. Due to this, when i915 PMU tries to stop the engine
events, it issues a warn_on because engine lookup fails.

All perf hooks are taking care of this using a pmu->closed flag that is
set when PMU unregisters. The stop event seems to have been left out.

Check for pmu->closed in pmu_event_stop as well.

Based on discussion here -
https://patchwork.freedesktop.org/patch/492079/?series=105790&rev=2

v2: s/is/if/ in commit title
v3: Add fixes tag and cc stable

Cc: <stable@vger.kernel.org> # v5.11+
Fixes: b00bccb3f0bb ("drm/i915/pmu: Handle PCI unbind")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020152441.3764850-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 31f6a06f0c543b43a38fab10f39e5fc45ad62aa2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/i915/i915_pmu.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/gpu/drm/i915/i915_pmu.c
+++ b/drivers/gpu/drm/i915/i915_pmu.c
@@ -761,9 +761,18 @@ static void i915_pmu_event_start(struct
 
 static void i915_pmu_event_stop(struct perf_event *event, int flags)
 {
+	struct drm_i915_private *i915 =
+		container_of(event->pmu, typeof(*i915), pmu.base);
+	struct i915_pmu *pmu = &i915->pmu;
+
+	if (pmu->closed)
+		goto out;
+
 	if (flags & PERF_EF_UPDATE)
 		i915_pmu_event_read(event);
 	i915_pmu_disable(event);
+
+out:
 	event->hw.state = PERF_HES_STOPPED;
 }
 

[PATCH 5.15 016/128] vsock/virtio: factor our the code to initialize and delete VQs

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stefano Garzarella <sgarzare@redhat.com>

[ Upstream commit a103209886264a3289f7e53e7ed389d0391fb23f ]

Add virtio_vsock_vqs_init() and virtio_vsock_vqs_del() with the code
that was in virtio_vsock_probe() and virtio_vsock_remove to initialize
and delete VQs.

These new functions will be used in the next commit to support device
suspend/resume

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 53b08c498515 ("vsock/virtio: initialize the_virtio_vsock before using VQs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/vmw_vsock/virtio_transport.c | 150 +++++++++++++++++--------------
 1 file changed, 84 insertions(+), 66 deletions(-)

diff --git a/net/vmw_vsock/virtio_transport.c b/net/vmw_vsock/virtio_transport.c
index c5f936fbf876d..e4773ae6a54d6 100644
--- a/net/vmw_vsock/virtio_transport.c
+++ b/net/vmw_vsock/virtio_transport.c
@@ -566,67 +566,28 @@ static void virtio_transport_rx_work(struct work_struct *work)
 	mutex_unlock(&vsock->rx_lock);
 }
 
-static int virtio_vsock_probe(struct virtio_device *vdev)
+static int virtio_vsock_vqs_init(struct virtio_vsock *vsock)
 {
-	vq_callback_t *callbacks[] = {
-		virtio_vsock_rx_done,
-		virtio_vsock_tx_done,
-		virtio_vsock_event_done,
-	};
+	struct virtio_device *vdev = vsock->vdev;
 	static const char * const names[] = {
 		"rx",
 		"tx",
 		"event",
 	};
-	struct virtio_vsock *vsock = NULL;
+	vq_callback_t *callbacks[] = {
+		virtio_vsock_rx_done,
+		virtio_vsock_tx_done,
+		virtio_vsock_event_done,
+	};
 	int ret;
 
-	ret = mutex_lock_interruptible(&the_virtio_vsock_mutex);
-	if (ret)
-		return ret;
-
-	/* Only one virtio-vsock device per guest is supported */
-	if (rcu_dereference_protected(the_virtio_vsock,
-				lockdep_is_held(&the_virtio_vsock_mutex))) {
-		ret = -EBUSY;
-		goto out;
-	}
-
-	vsock = kzalloc(sizeof(*vsock), GFP_KERNEL);
-	if (!vsock) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	vsock->vdev = vdev;
-
-	ret = virtio_find_vqs(vsock->vdev, VSOCK_VQ_MAX,
-			      vsock->vqs, callbacks, names,
+	ret = virtio_find_vqs(vdev, VSOCK_VQ_MAX, vsock->vqs, callbacks, names,
 			      NULL);
 	if (ret < 0)
-		goto out;
+		return ret;
 
 	virtio_vsock_update_guest_cid(vsock);
 
-	vsock->rx_buf_nr = 0;
-	vsock->rx_buf_max_nr = 0;
-	atomic_set(&vsock->queued_replies, 0);
-
-	mutex_init(&vsock->tx_lock);
-	mutex_init(&vsock->rx_lock);
-	mutex_init(&vsock->event_lock);
-	spin_lock_init(&vsock->send_pkt_list_lock);
-	INIT_LIST_HEAD(&vsock->send_pkt_list);
-	INIT_WORK(&vsock->rx_work, virtio_transport_rx_work);
-	INIT_WORK(&vsock->tx_work, virtio_transport_tx_work);
-	INIT_WORK(&vsock->event_work, virtio_transport_event_work);
-	INIT_WORK(&vsock->send_pkt_work, virtio_transport_send_pkt_work);
-
-	if (virtio_has_feature(vdev, VIRTIO_VSOCK_F_SEQPACKET))
-		vsock->seqpacket_allow = true;
-
-	vdev->priv = vsock;
-
 	virtio_device_ready(vdev);
 
 	mutex_lock(&vsock->tx_lock);
@@ -643,30 +604,15 @@ static int virtio_vsock_probe(struct virtio_device *vdev)
 	vsock->event_run = true;
 	mutex_unlock(&vsock->event_lock);
 
-	rcu_assign_pointer(the_virtio_vsock, vsock);
-
-	mutex_unlock(&the_virtio_vsock_mutex);
-
 	return 0;
-
-out:
-	kfree(vsock);
-	mutex_unlock(&the_virtio_vsock_mutex);
-	return ret;
 }
 
-static void virtio_vsock_remove(struct virtio_device *vdev)
+static void virtio_vsock_vqs_del(struct virtio_vsock *vsock)
 {
-	struct virtio_vsock *vsock = vdev->priv;
+	struct virtio_device *vdev = vsock->vdev;
 	struct virtio_vsock_pkt *pkt;
 
-	mutex_lock(&the_virtio_vsock_mutex);
-
-	vdev->priv = NULL;
-	rcu_assign_pointer(the_virtio_vsock, NULL);
-	synchronize_rcu();
-
-	/* Reset all connected sockets when the device disappear */
+	/* Reset all connected sockets when the VQs disappear */
 	vsock_for_each_connected_socket(&virtio_transport.transport,
 					virtio_vsock_reset_sock);
 
@@ -711,6 +657,78 @@ static void virtio_vsock_remove(struct virtio_device *vdev)
 
 	/* Delete virtqueues and flush outstanding callbacks if any */
 	vdev->config->del_vqs(vdev);
+}
+
+static int virtio_vsock_probe(struct virtio_device *vdev)
+{
+	struct virtio_vsock *vsock = NULL;
+	int ret;
+
+	ret = mutex_lock_interruptible(&the_virtio_vsock_mutex);
+	if (ret)
+		return ret;
+
+	/* Only one virtio-vsock device per guest is supported */
+	if (rcu_dereference_protected(the_virtio_vsock,
+				lockdep_is_held(&the_virtio_vsock_mutex))) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	vsock = kzalloc(sizeof(*vsock), GFP_KERNEL);
+	if (!vsock) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	vsock->vdev = vdev;
+
+	vsock->rx_buf_nr = 0;
+	vsock->rx_buf_max_nr = 0;
+	atomic_set(&vsock->queued_replies, 0);
+
+	mutex_init(&vsock->tx_lock);
+	mutex_init(&vsock->rx_lock);
+	mutex_init(&vsock->event_lock);
+	spin_lock_init(&vsock->send_pkt_list_lock);
+	INIT_LIST_HEAD(&vsock->send_pkt_list);
+	INIT_WORK(&vsock->rx_work, virtio_transport_rx_work);
+	INIT_WORK(&vsock->tx_work, virtio_transport_tx_work);
+	INIT_WORK(&vsock->event_work, virtio_transport_event_work);
+	INIT_WORK(&vsock->send_pkt_work, virtio_transport_send_pkt_work);
+
+	if (virtio_has_feature(vdev, VIRTIO_VSOCK_F_SEQPACKET))
+		vsock->seqpacket_allow = true;
+
+	vdev->priv = vsock;
+
+	ret = virtio_vsock_vqs_init(vsock);
+	if (ret < 0)
+		goto out;
+
+	rcu_assign_pointer(the_virtio_vsock, vsock);
+
+	mutex_unlock(&the_virtio_vsock_mutex);
+
+	return 0;
+
+out:
+	kfree(vsock);
+	mutex_unlock(&the_virtio_vsock_mutex);
+	return ret;
+}
+
+static void virtio_vsock_remove(struct virtio_device *vdev)
+{
+	struct virtio_vsock *vsock = vdev->priv;
+
+	mutex_lock(&the_virtio_vsock_mutex);
+
+	vdev->priv = NULL;
+	rcu_assign_pointer(the_virtio_vsock, NULL);
+	synchronize_rcu();
+
+	virtio_vsock_vqs_del(vsock);
 
 	/* Other works can be queued before 'config->del_vqs()', so we flush
 	 * all works before to free the vsock object to avoid use after free.
-- 
2.42.0

[PATCH 5.15 017/128] vsock/virtio: add support for device suspend/resume

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stefano Garzarella <sgarzare@redhat.com>

[ Upstream commit bd50c5dc182b0a52599f87b429f9a5a9cbfc9b1c ]

Implement .freeze and .restore callbacks of struct virtio_driver
to support device suspend/resume.

During suspension all connected sockets are reset and VQs deleted.
During resume the VQs are re-initialized.

Reported by: Vilas R K <vilas.r.k@intel.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 53b08c498515 ("vsock/virtio: initialize the_virtio_vsock before using VQs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/vmw_vsock/virtio_transport.c | 47 ++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/net/vmw_vsock/virtio_transport.c b/net/vmw_vsock/virtio_transport.c
index e4773ae6a54d6..f6fa26228e5cf 100644
--- a/net/vmw_vsock/virtio_transport.c
+++ b/net/vmw_vsock/virtio_transport.c
@@ -743,6 +743,49 @@ static void virtio_vsock_remove(struct virtio_device *vdev)
 	kfree(vsock);
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int virtio_vsock_freeze(struct virtio_device *vdev)
+{
+	struct virtio_vsock *vsock = vdev->priv;
+
+	mutex_lock(&the_virtio_vsock_mutex);
+
+	rcu_assign_pointer(the_virtio_vsock, NULL);
+	synchronize_rcu();
+
+	virtio_vsock_vqs_del(vsock);
+
+	mutex_unlock(&the_virtio_vsock_mutex);
+
+	return 0;
+}
+
+static int virtio_vsock_restore(struct virtio_device *vdev)
+{
+	struct virtio_vsock *vsock = vdev->priv;
+	int ret;
+
+	mutex_lock(&the_virtio_vsock_mutex);
+
+	/* Only one virtio-vsock device per guest is supported */
+	if (rcu_dereference_protected(the_virtio_vsock,
+				lockdep_is_held(&the_virtio_vsock_mutex))) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	ret = virtio_vsock_vqs_init(vsock);
+	if (ret < 0)
+		goto out;
+
+	rcu_assign_pointer(the_virtio_vsock, vsock);
+
+out:
+	mutex_unlock(&the_virtio_vsock_mutex);
+	return ret;
+}
+#endif /* CONFIG_PM_SLEEP */
+
 static struct virtio_device_id id_table[] = {
 	{ VIRTIO_ID_VSOCK, VIRTIO_DEV_ANY_ID },
 	{ 0 },
@@ -760,6 +803,10 @@ static struct virtio_driver virtio_vsock_driver = {
 	.id_table = id_table,
 	.probe = virtio_vsock_probe,
 	.remove = virtio_vsock_remove,
+#ifdef CONFIG_PM_SLEEP
+	.freeze = virtio_vsock_freeze,
+	.restore = virtio_vsock_restore,
+#endif
 };
 
 static int __init virtio_vsock_init(void)
-- 
2.42.0

[PATCH 5.15 018/128] vsock/virtio: initialize the_virtio_vsock before using VQs

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexandru Matei <alexandru.matei@uipath.com>

[ Upstream commit 53b08c4985158430fd6d035fb49443bada535210 ]

Once VQs are filled with empty buffers and we kick the host, it can send
connection requests. If the_virtio_vsock is not initialized before,
replies are silently dropped and do not reach the host.

virtio_transport_send_pkt() can queue packets once the_virtio_vsock is
set, but they won't be processed until vsock->tx_run is set to true. We
queue vsock->send_pkt_work when initialization finishes to send those
packets queued earlier.

Fixes: 0deab087b16a ("vsock/virtio: use RCU to avoid use-after-free on the_virtio_vsock")
Signed-off-by: Alexandru Matei <alexandru.matei@uipath.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20231024191742.14259-1-alexandru.matei@uipath.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/vmw_vsock/virtio_transport.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/net/vmw_vsock/virtio_transport.c b/net/vmw_vsock/virtio_transport.c
index f6fa26228e5cf..0b41028ed544a 100644
--- a/net/vmw_vsock/virtio_transport.c
+++ b/net/vmw_vsock/virtio_transport.c
@@ -590,6 +590,11 @@ static int virtio_vsock_vqs_init(struct virtio_vsock *vsock)
 
 	virtio_device_ready(vdev);
 
+	return 0;
+}
+
+static void virtio_vsock_vqs_start(struct virtio_vsock *vsock)
+{
 	mutex_lock(&vsock->tx_lock);
 	vsock->tx_run = true;
 	mutex_unlock(&vsock->tx_lock);
@@ -604,7 +609,16 @@ static int virtio_vsock_vqs_init(struct virtio_vsock *vsock)
 	vsock->event_run = true;
 	mutex_unlock(&vsock->event_lock);
 
-	return 0;
+	/* virtio_transport_send_pkt() can queue packets once
+	 * the_virtio_vsock is set, but they won't be processed until
+	 * vsock->tx_run is set to true. We queue vsock->send_pkt_work
+	 * when initialization finishes to send those packets queued
+	 * earlier.
+	 * We don't need to queue the other workers (rx, event) because
+	 * as long as we don't fill the queues with empty buffers, the
+	 * host can't send us any notification.
+	 */
+	queue_work(virtio_vsock_workqueue, &vsock->send_pkt_work);
 }
 
 static void virtio_vsock_vqs_del(struct virtio_vsock *vsock)
@@ -707,6 +721,7 @@ static int virtio_vsock_probe(struct virtio_device *vdev)
 		goto out;
 
 	rcu_assign_pointer(the_virtio_vsock, vsock);
+	virtio_vsock_vqs_start(vsock);
 
 	mutex_unlock(&the_virtio_vsock_mutex);
 
@@ -779,6 +794,7 @@ static int virtio_vsock_restore(struct virtio_device *vdev)
 		goto out;
 
 	rcu_assign_pointer(the_virtio_vsock, vsock);
+	virtio_vsock_vqs_start(vsock);
 
 out:
 	mutex_unlock(&the_virtio_vsock_mutex);
-- 
2.42.0

[PATCH 5.15 019/128] drm/dp_mst: Fix NULL deref in get_mst_branch_device_by_guid_helper()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lukasz Majczak <lma@semihalf.com>

[ Upstream commit 3d887d512494d678b17c57b835c32f4e48d34f26 ]

As drm_dp_get_mst_branch_device_by_guid() is called from
drm_dp_get_mst_branch_device_by_guid(), mstb parameter has to be checked,
otherwise NULL dereference may occur in the call to
the memcpy() and cause following:

[12579.365869] BUG: kernel NULL pointer dereference, address: 0000000000000049
[12579.365878] #PF: supervisor read access in kernel mode
[12579.365880] #PF: error_code(0x0000) - not-present page
[12579.365882] PGD 0 P4D 0
[12579.365887] Oops: 0000 [#1] PREEMPT SMP NOPTI
...
[12579.365895] Workqueue: events_long drm_dp_mst_up_req_work
[12579.365899] RIP: 0010:memcmp+0xb/0x29
[12579.365921] Call Trace:
[12579.365927] get_mst_branch_device_by_guid_helper+0x22/0x64
[12579.365930] drm_dp_mst_up_req_work+0x137/0x416
[12579.365933] process_one_work+0x1d0/0x419
[12579.365935] worker_thread+0x11a/0x289
[12579.365938] kthread+0x13e/0x14f
[12579.365941] ? process_one_work+0x419/0x419
[12579.365943] ? kthread_blkcg+0x31/0x31
[12579.365946] ret_from_fork+0x1f/0x30

As get_mst_branch_device_by_guid_helper() is recursive, moving condition
to the first line allow to remove a similar one for step over of NULL elements
inside a loop.

Fixes: 5e93b8208d3c ("drm/dp/mst: move GUID storage from mgr, port to only mst branch")
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Lukasz Majczak <lma@semihalf.com>
Reviewed-by: Radoslaw Biernacki <rad@chromium.org>
Signed-off-by: Manasi Navare <navaremanasi@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230922063410.23626-1-lma@semihalf.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_dp_mst_topology.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
index d02e323a4ecde..865c7f39143ec 100644
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -2615,14 +2615,14 @@ static struct drm_dp_mst_branch *get_mst_branch_device_by_guid_helper(
 	struct drm_dp_mst_branch *found_mstb;
 	struct drm_dp_mst_port *port;
 
+	if (!mstb)
+		return NULL;
+
 	if (memcmp(mstb->guid, guid, 16) == 0)
 		return mstb;
 
 
 	list_for_each_entry(port, &mstb->ports, next) {
-		if (!port->mstb)
-			continue;
-
 		found_mstb = get_mst_branch_device_by_guid_helper(port->mstb, guid);
 
 		if (found_mstb)
-- 
2.42.0

[PATCH 5.15 020/128] firmware/imx-dsp: Fix use_after_free in imx_dsp_setup_channels()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hao Ge <gehao@kylinos.cn>

[ Upstream commit 1558b1a8dd388f5fcc3abc1e24de854a295044c3 ]

dsp_chan->name and chan_name points to same block of memory,
because dev_err still needs to be used it,so we need free
it's memory after use to avoid use_after_free.

Fixes: e527adfb9b7d ("firmware: imx-dsp: Fix an error handling path in imx_dsp_setup_channels()")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/imx/imx-dsp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/firmware/imx/imx-dsp.c b/drivers/firmware/imx/imx-dsp.c
index 1f410809d3ee4..0f656e4191d5c 100644
--- a/drivers/firmware/imx/imx-dsp.c
+++ b/drivers/firmware/imx/imx-dsp.c
@@ -115,11 +115,11 @@ static int imx_dsp_setup_channels(struct imx_dsp_ipc *dsp_ipc)
 		dsp_chan->idx = i % 2;
 		dsp_chan->ch = mbox_request_channel_byname(cl, chan_name);
 		if (IS_ERR(dsp_chan->ch)) {
-			kfree(dsp_chan->name);
 			ret = PTR_ERR(dsp_chan->ch);
 			if (ret != -EPROBE_DEFER)
 				dev_err(dev, "Failed to request mbox chan %s ret %d\n",
 					chan_name, ret);
+			kfree(dsp_chan->name);
 			goto out;
 		}
 
-- 
2.42.0

[PATCH 5.15 021/128] r8169: fix the KCSAN reported data-race in rtl_tx() while reading tp->cur_tx

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>

[ Upstream commit c1c0ce31b2420d5c173228a2132a492ede03d81f ]

KCSAN reported the following data-race:

==================================================================
BUG: KCSAN: data-race in rtl8169_poll [r8169] / rtl8169_start_xmit [r8169]

write (marked) to 0xffff888102474b74 of 4 bytes by task 5358 on cpu 29:
rtl8169_start_xmit (drivers/net/ethernet/realtek/r8169_main.c:4254) r8169
dev_hard_start_xmit (./include/linux/netdevice.h:4889 ./include/linux/netdevice.h:4903 net/core/dev.c:3544 net/core/dev.c:3560)
sch_direct_xmit (net/sched/sch_generic.c:342)
__dev_queue_xmit (net/core/dev.c:3817 net/core/dev.c:4306)
ip_finish_output2 (./include/linux/netdevice.h:3082 ./include/net/neighbour.h:526 ./include/net/neighbour.h:540 net/ipv4/ip_output.c:233)
__ip_finish_output (net/ipv4/ip_output.c:311 net/ipv4/ip_output.c:293)
ip_finish_output (net/ipv4/ip_output.c:328)
ip_output (net/ipv4/ip_output.c:435)
ip_send_skb (./include/net/dst.h:458 net/ipv4/ip_output.c:127 net/ipv4/ip_output.c:1486)
udp_send_skb (net/ipv4/udp.c:963)
udp_sendmsg (net/ipv4/udp.c:1246)
inet_sendmsg (net/ipv4/af_inet.c:840 (discriminator 4))
sock_sendmsg (net/socket.c:730 net/socket.c:753)
__sys_sendto (net/socket.c:2177)
__x64_sys_sendto (net/socket.c:2185)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)

read to 0xffff888102474b74 of 4 bytes by interrupt on cpu 21:
rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4397 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169
__napi_poll (net/core/dev.c:6527)
net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727)
__do_softirq (kernel/softirq.c:553)
__irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632)
irq_exit_rcu (kernel/softirq.c:647)
common_interrupt (arch/x86/kernel/irq.c:247 (discriminator 14))
asm_common_interrupt (./arch/x86/include/asm/idtentry.h:636)
cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291)
cpuidle_enter (drivers/cpuidle/cpuidle.c:390)
call_cpuidle (kernel/sched/idle.c:135)
do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282)
cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1))
start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294)
secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433)

value changed: 0x002f4815 -> 0x002f4816

Reported by Kernel Concurrency Sanitizer on:
CPU: 21 PID: 0 Comm: swapper/21 Tainted: G             L     6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 #41
Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023
==================================================================

The write side of drivers/net/ethernet/realtek/r8169_main.c is:
==================
   4251         /* rtl_tx needs to see descriptor changes before updated tp->cur_tx */
   4252         smp_wmb();
   4253
 → 4254         WRITE_ONCE(tp->cur_tx, tp->cur_tx + frags + 1);
   4255
   4256         stop_queue = !netif_subqueue_maybe_stop(dev, 0, rtl_tx_slots_avail(tp),
   4257                                                 R8169_TX_STOP_THRS,
   4258                                                 R8169_TX_START_THRS);

The read side is the function rtl_tx():

   4355 static void rtl_tx(struct net_device *dev, struct rtl8169_private *tp,
   4356                    int budget)
   4357 {
   4358         unsigned int dirty_tx, bytes_compl = 0, pkts_compl = 0;
   4359         struct sk_buff *skb;
   4360
   4361         dirty_tx = tp->dirty_tx;
   4362
   4363         while (READ_ONCE(tp->cur_tx) != dirty_tx) {
   4364                 unsigned int entry = dirty_tx % NUM_TX_DESC;
   4365                 u32 status;
   4366
   4367                 status = le32_to_cpu(tp->TxDescArray[entry].opts1);
   4368                 if (status & DescOwn)
   4369                         break;
   4370
   4371                 skb = tp->tx_skb[entry].skb;
   4372                 rtl8169_unmap_tx_skb(tp, entry);
   4373
   4374                 if (skb) {
   4375                         pkts_compl++;
   4376                         bytes_compl += skb->len;
   4377                         napi_consume_skb(skb, budget);
   4378                 }
   4379                 dirty_tx++;
   4380         }
   4381
   4382         if (tp->dirty_tx != dirty_tx) {
   4383                 dev_sw_netstats_tx_add(dev, pkts_compl, bytes_compl);
   4384                 WRITE_ONCE(tp->dirty_tx, dirty_tx);
   4385
   4386                 netif_subqueue_completed_wake(dev, 0, pkts_compl, bytes_compl,
   4387                                               rtl_tx_slots_avail(tp),
   4388                                               R8169_TX_START_THRS);
   4389                 /*
   4390                  * 8168 hack: TxPoll requests are lost when the Tx packets are
   4391                  * too close. Let's kick an extra TxPoll request when a burst
   4392                  * of start_xmit activity is detected (if it is not detected,
   4393                  * it is slow enough). -- FR
   4394                  * If skb is NULL then we come here again once a tx irq is
   4395                  * triggered after the last fragment is marked transmitted.
   4396                  */
 → 4397                 if (tp->cur_tx != dirty_tx && skb)
   4398                         rtl8169_doorbell(tp);
   4399         }
   4400 }

Obviously from the code, an earlier detected data-race for tp->cur_tx was fixed in the
line 4363:

   4363         while (READ_ONCE(tp->cur_tx) != dirty_tx) {

but the same solution is required for protecting the other access to tp->cur_tx:

 → 4397                 if (READ_ONCE(tp->cur_tx) != dirty_tx && skb)
   4398                         rtl8169_doorbell(tp);

The write in the line 4254 is protected with WRITE_ONCE(), but the read in the line 4397
might have suffered read tearing under some compiler optimisations.

The fix eliminated the KCSAN data-race report for this bug.

It is yet to be evaluated what happens if tp->cur_tx changes between the test in line 4363
and line 4397. This test should certainly not be cached by the compiler in some register
for such a long time, while asynchronous writes to tp->cur_tx might have occurred in line
4254 in the meantime.

Fixes: 94d8a98e6235c ("r8169: reduce number of workaround doorbell rings")
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: nic_swsd@realtek.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/lkml/dc7fc8fa-4ea4-e9a9-30a6-7c83e6b53188@alu.unizg.hr/
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/realtek/r8169_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index 264bb3ec44a59..2ecfff54339ac 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -4480,7 +4480,7 @@ static void rtl_tx(struct net_device *dev, struct rtl8169_private *tp,
 		 * If skb is NULL then we come here again once a tx irq is
 		 * triggered after the last fragment is marked transmitted.
 		 */
-		if (tp->cur_tx != dirty_tx && skb)
+		if (READ_ONCE(tp->cur_tx) != dirty_tx && skb)
 			rtl8169_doorbell(tp);
 	}
 }
-- 
2.42.0

[PATCH 5.15 022/128] r8169: fix the KCSAN reported data-race in rtl_tx while reading TxDescArray[entry].opts1

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>

[ Upstream commit dcf75a0f6bc136de94e88178ae5f51b7f879abc9 ]

KCSAN reported the following data-race:

==================================================================
BUG: KCSAN: data-race in rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4368 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169

race at unknown origin, with read to 0xffff888140d37570 of 4 bytes by interrupt on cpu 21:
rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4368 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169
__napi_poll (net/core/dev.c:6527)
net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727)
__do_softirq (kernel/softirq.c:553)
__irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632)
irq_exit_rcu (kernel/softirq.c:647)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1074 (discriminator 14))
asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:645)
cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291)
cpuidle_enter (drivers/cpuidle/cpuidle.c:390)
call_cpuidle (kernel/sched/idle.c:135)
do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282)
cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1))
start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294)
secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433)

value changed: 0xb0000042 -> 0x00000000

Reported by Kernel Concurrency Sanitizer on:
CPU: 21 PID: 0 Comm: swapper/21 Tainted: G             L     6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 #41
Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023
==================================================================

The read side is in

drivers/net/ethernet/realtek/r8169_main.c
=========================================
   4355 static void rtl_tx(struct net_device *dev, struct rtl8169_private *tp,
   4356                    int budget)
   4357 {
   4358         unsigned int dirty_tx, bytes_compl = 0, pkts_compl = 0;
   4359         struct sk_buff *skb;
   4360
   4361         dirty_tx = tp->dirty_tx;
   4362
   4363         while (READ_ONCE(tp->cur_tx) != dirty_tx) {
   4364                 unsigned int entry = dirty_tx % NUM_TX_DESC;
   4365                 u32 status;
   4366
 → 4367                 status = le32_to_cpu(tp->TxDescArray[entry].opts1);
   4368                 if (status & DescOwn)
   4369                         break;
   4370
   4371                 skb = tp->tx_skb[entry].skb;
   4372                 rtl8169_unmap_tx_skb(tp, entry);
   4373
   4374                 if (skb) {
   4375                         pkts_compl++;
   4376                         bytes_compl += skb->len;
   4377                         napi_consume_skb(skb, budget);
   4378                 }
   4379                 dirty_tx++;
   4380         }
   4381
   4382         if (tp->dirty_tx != dirty_tx) {
   4383                 dev_sw_netstats_tx_add(dev, pkts_compl, bytes_compl);
   4384                 WRITE_ONCE(tp->dirty_tx, dirty_tx);
   4385
   4386                 netif_subqueue_completed_wake(dev, 0, pkts_compl, bytes_compl,
   4387                                               rtl_tx_slots_avail(tp),
   4388                                               R8169_TX_START_THRS);
   4389                 /*
   4390                  * 8168 hack: TxPoll requests are lost when the Tx packets are
   4391                  * too close. Let's kick an extra TxPoll request when a burst
   4392                  * of start_xmit activity is detected (if it is not detected,
   4393                  * it is slow enough). -- FR
   4394                  * If skb is NULL then we come here again once a tx irq is
   4395                  * triggered after the last fragment is marked transmitted.
   4396                  */
   4397                 if (READ_ONCE(tp->cur_tx) != dirty_tx && skb)
   4398                         rtl8169_doorbell(tp);
   4399         }
   4400 }

tp->TxDescArray[entry].opts1 is reported to have a data-race and READ_ONCE() fixes
this KCSAN warning.

   4366
 → 4367                 status = le32_to_cpu(READ_ONCE(tp->TxDescArray[entry].opts1));
   4368                 if (status & DescOwn)
   4369                         break;
   4370

Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: nic_swsd@realtek.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/lkml/dc7fc8fa-4ea4-e9a9-30a6-7c83e6b53188@alu.unizg.hr/
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Marco Elver <elver@google.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/realtek/r8169_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index 2ecfff54339ac..d5a52fcd57cd0 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -4443,7 +4443,7 @@ static void rtl_tx(struct net_device *dev, struct rtl8169_private *tp,
 		unsigned int entry = dirty_tx % NUM_TX_DESC;
 		u32 status;
 
-		status = le32_to_cpu(tp->TxDescArray[entry].opts1);
+		status = le32_to_cpu(READ_ONCE(tp->TxDescArray[entry].opts1));
 		if (status & DescOwn)
 			break;
 
-- 
2.42.0

[PATCH 5.15 023/128] r8169: fix the KCSAN reported data race in rtl_rx while reading desc->opts1

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>

[ Upstream commit f97eee484e71890131f9c563c5cc6d5a69e4308d ]

KCSAN reported the following data-race bug:

==================================================================
BUG: KCSAN: data-race in rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4430 drivers/net/ethernet/realtek/r8169_main.c:4583) r8169

race at unknown origin, with read to 0xffff888117e43510 of 4 bytes by interrupt on cpu 21:
rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4430 drivers/net/ethernet/realtek/r8169_main.c:4583) r8169
__napi_poll (net/core/dev.c:6527)
net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727)
__do_softirq (kernel/softirq.c:553)
__irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632)
irq_exit_rcu (kernel/softirq.c:647)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1074 (discriminator 14))
asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:645)
cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291)
cpuidle_enter (drivers/cpuidle/cpuidle.c:390)
call_cpuidle (kernel/sched/idle.c:135)
do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282)
cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1))
start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294)
secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433)

value changed: 0x80003fff -> 0x3402805f

Reported by Kernel Concurrency Sanitizer on:
CPU: 21 PID: 0 Comm: swapper/21 Tainted: G             L     6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 #41
Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023
==================================================================

drivers/net/ethernet/realtek/r8169_main.c:
==========================================
   4429
 → 4430                 status = le32_to_cpu(desc->opts1);
   4431                 if (status & DescOwn)
   4432                         break;
   4433
   4434                 /* This barrier is needed to keep us from reading
   4435                  * any other fields out of the Rx descriptor until
   4436                  * we know the status of DescOwn
   4437                  */
   4438                 dma_rmb();
   4439
   4440                 if (unlikely(status & RxRES)) {
   4441                         if (net_ratelimit())
   4442                                 netdev_warn(dev, "Rx ERROR. status = %08x\n",

Marco Elver explained that dma_rmb() doesn't prevent the compiler to tear up the access to
desc->opts1 which can be written to concurrently. READ_ONCE() should prevent that from
happening:

   4429
 → 4430                 status = le32_to_cpu(READ_ONCE(desc->opts1));
   4431                 if (status & DescOwn)
   4432                         break;
   4433

As the consequence of this fix, this KCSAN warning was eliminated.

Fixes: 6202806e7c03a ("r8169: drop member opts1_mask from struct rtl8169_private")
Suggested-by: Marco Elver <elver@google.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: nic_swsd@realtek.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/lkml/dc7fc8fa-4ea4-e9a9-30a6-7c83e6b53188@alu.unizg.hr/
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/realtek/r8169_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index d5a52fcd57cd0..1cd0928472c0c 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -4513,7 +4513,7 @@ static int rtl_rx(struct net_device *dev, struct rtl8169_private *tp, int budget
 		dma_addr_t addr;
 		u32 status;
 
-		status = le32_to_cpu(desc->opts1);
+		status = le32_to_cpu(READ_ONCE(desc->opts1));
 		if (status & DescOwn)
 			break;
 
-- 
2.42.0

[PATCH 5.15 024/128] i40e: Fix I40E_FLAG_VF_VLAN_PRUNING value

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ivan Vecera <ivecera@redhat.com>

[ Upstream commit 665e7d83c5386f9abdc67b2e4b6e6d9579aadfcb ]

Commit c87c938f62d8f1 ("i40e: Add VF VLAN pruning") added new
PF flag I40E_FLAG_VF_VLAN_PRUNING but its value collides with
existing I40E_FLAG_TOTAL_PORT_SHUTDOWN_ENABLED flag.

Move the affected flag at the end of the flags and fix its value.

Reproducer:
[root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 link-down-on-close on
[root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 vf-vlan-pruning on
[root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 link-down-on-close off
[ 6323.142585] i40e 0000:02:00.0: Setting link-down-on-close not supported on this port (because total-port-shutdown is enabled)
netlink error: Operation not supported
[root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 vf-vlan-pruning off
[root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 link-down-on-close off

The link-down-on-close flag cannot be modified after setting vf-vlan-pruning
because vf-vlan-pruning shares the same bit with total-port-shutdown flag
that prevents any modification of link-down-on-close flag.

Fixes: c87c938f62d8 ("i40e: Add VF VLAN pruning")
Cc: Mateusz Palczewski <mateusz.palczewski@intel.com>
Cc: Simon Horman <horms@kernel.org>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/i40e/i40e.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index b76e6f94edb05..22802222d34d1 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -566,7 +566,6 @@ struct i40e_pf {
 #define I40E_FLAG_DISABLE_FW_LLDP		BIT(24)
 #define I40E_FLAG_RS_FEC			BIT(25)
 #define I40E_FLAG_BASE_R_FEC			BIT(26)
-#define I40E_FLAG_VF_VLAN_PRUNING		BIT(27)
 /* TOTAL_PORT_SHUTDOWN
  * Allows to physically disable the link on the NIC's port.
  * If enabled, (after link down request from the OS)
@@ -589,6 +588,7 @@ struct i40e_pf {
  *   in abilities field of i40e_aq_set_phy_config structure
  */
 #define I40E_FLAG_TOTAL_PORT_SHUTDOWN_ENABLED	BIT(27)
+#define I40E_FLAG_VF_VLAN_PRUNING		BIT(28)
 
 	struct i40e_client_instance *cinst;
 	bool stat_offsets_loaded;
-- 
2.42.0

[PATCH 5.15 025/128] treewide: Spelling fix in comment

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kunwu Chan <chentao@kylinos.cn>

[ Upstream commit fb71ba0ed8be9534493c80ba00142a64d9972a72 ]

reques -> request

Fixes: 09dde54c6a69 ("PS3: gelic: Add wireless support for PS3")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/toshiba/ps3_gelic_wireless.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c b/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c
index dc14a66583ff3..44488c153ea25 100644
--- a/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c
@@ -1217,7 +1217,7 @@ static int gelic_wl_set_encodeext(struct net_device *netdev,
 		key_index = wl->current_key;
 
 	if (!enc->length && (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)) {
-		/* reques to change default key index */
+		/* request to change default key index */
 		pr_debug("%s: request to change default key to %d\n",
 			 __func__, key_index);
 		wl->current_key = key_index;
-- 
2.42.0

[PATCH 5.15 026/128] igb: Fix potential memory leak in igb_add_ethtool_nfc_entry

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mateusz Palczewski <mateusz.palczewski@intel.com>

[ Upstream commit 8c0b48e01daba5ca58f939a8425855d3f4f2ed14 ]

Add check for return of igb_update_ethtool_nfc_entry so that in case
of any potential errors the memory alocated for input will be freed.

Fixes: 0e71def25281 ("igb: add support of RX network flow classification")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igb/igb_ethtool.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index b2f46004a3d0f..39c7bdf8c0e2d 100644
--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -2974,11 +2974,15 @@ static int igb_add_ethtool_nfc_entry(struct igb_adapter *adapter,
 	if (err)
 		goto err_out_w_lock;
 
-	igb_update_ethtool_nfc_entry(adapter, input, input->sw_idx);
+	err = igb_update_ethtool_nfc_entry(adapter, input, input->sw_idx);
+	if (err)
+		goto err_out_input_filter;
 
 	spin_unlock(&adapter->nfc_lock);
 	return 0;
 
+err_out_input_filter:
+	igb_erase_filter(adapter, input);
 err_out_w_lock:
 	spin_unlock(&adapter->nfc_lock);
 err_out:
-- 
2.42.0

[PATCH 5.15 027/128] neighbour: fix various data-races

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit a9beb7e81bcb876615e1fbb3c07f3f9dba69831f ]

1) tbl->gc_thresh1, tbl->gc_thresh2, tbl->gc_thresh3 and tbl->gc_interval
   can be written from sysfs.

2) tbl->last_flush is read locklessly from neigh_alloc()

3) tbl->proxy_queue.qlen is read locklessly from neightbl_fill_info()

4) neightbl_fill_info() reads cpu stats that can be changed concurrently.

Fixes: c7fb64db001f ("[NETLINK]: Neighbour table configuration and statistics via rtnetlink")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231019122104.1448310-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/neighbour.c | 67 +++++++++++++++++++++++---------------------
 1 file changed, 35 insertions(+), 32 deletions(-)

diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index a385086091fd3..927c4db2703ff 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -223,7 +223,8 @@ bool neigh_remove_one(struct neighbour *ndel, struct neigh_table *tbl)
 
 static int neigh_forced_gc(struct neigh_table *tbl)
 {
-	int max_clean = atomic_read(&tbl->gc_entries) - tbl->gc_thresh2;
+	int max_clean = atomic_read(&tbl->gc_entries) -
+			READ_ONCE(tbl->gc_thresh2);
 	unsigned long tref = jiffies - 5 * HZ;
 	struct neighbour *n, *tmp;
 	int shrunk = 0;
@@ -252,7 +253,7 @@ static int neigh_forced_gc(struct neigh_table *tbl)
 		}
 	}
 
-	tbl->last_flush = jiffies;
+	WRITE_ONCE(tbl->last_flush, jiffies);
 
 	write_unlock_bh(&tbl->lock);
 
@@ -408,17 +409,17 @@ static struct neighbour *neigh_alloc(struct neigh_table *tbl,
 {
 	struct neighbour *n = NULL;
 	unsigned long now = jiffies;
-	int entries;
+	int entries, gc_thresh3;
 
 	if (exempt_from_gc)
 		goto do_alloc;
 
 	entries = atomic_inc_return(&tbl->gc_entries) - 1;
-	if (entries >= tbl->gc_thresh3 ||
-	    (entries >= tbl->gc_thresh2 &&
-	     time_after(now, tbl->last_flush + 5 * HZ))) {
-		if (!neigh_forced_gc(tbl) &&
-		    entries >= tbl->gc_thresh3) {
+	gc_thresh3 = READ_ONCE(tbl->gc_thresh3);
+	if (entries >= gc_thresh3 ||
+	    (entries >= READ_ONCE(tbl->gc_thresh2) &&
+	     time_after(now, READ_ONCE(tbl->last_flush) + 5 * HZ))) {
+		if (!neigh_forced_gc(tbl) && entries >= gc_thresh3) {
 			net_info_ratelimited("%s: neighbor table overflow!\n",
 					     tbl->id);
 			NEIGH_CACHE_STAT_INC(tbl, table_fulls);
@@ -897,13 +898,14 @@ static void neigh_periodic_work(struct work_struct *work)
 
 	if (time_after(jiffies, tbl->last_rand + 300 * HZ)) {
 		struct neigh_parms *p;
-		tbl->last_rand = jiffies;
+
+		WRITE_ONCE(tbl->last_rand, jiffies);
 		list_for_each_entry(p, &tbl->parms_list, list)
 			p->reachable_time =
 				neigh_rand_reach_time(NEIGH_VAR(p, BASE_REACHABLE_TIME));
 	}
 
-	if (atomic_read(&tbl->entries) < tbl->gc_thresh1)
+	if (atomic_read(&tbl->entries) < READ_ONCE(tbl->gc_thresh1))
 		goto out;
 
 	for (i = 0 ; i < (1 << nht->hash_shift); i++) {
@@ -2047,15 +2049,16 @@ static int neightbl_fill_info(struct sk_buff *skb, struct neigh_table *tbl,
 	ndtmsg->ndtm_pad2   = 0;
 
 	if (nla_put_string(skb, NDTA_NAME, tbl->id) ||
-	    nla_put_msecs(skb, NDTA_GC_INTERVAL, tbl->gc_interval, NDTA_PAD) ||
-	    nla_put_u32(skb, NDTA_THRESH1, tbl->gc_thresh1) ||
-	    nla_put_u32(skb, NDTA_THRESH2, tbl->gc_thresh2) ||
-	    nla_put_u32(skb, NDTA_THRESH3, tbl->gc_thresh3))
+	    nla_put_msecs(skb, NDTA_GC_INTERVAL, READ_ONCE(tbl->gc_interval),
+			  NDTA_PAD) ||
+	    nla_put_u32(skb, NDTA_THRESH1, READ_ONCE(tbl->gc_thresh1)) ||
+	    nla_put_u32(skb, NDTA_THRESH2, READ_ONCE(tbl->gc_thresh2)) ||
+	    nla_put_u32(skb, NDTA_THRESH3, READ_ONCE(tbl->gc_thresh3)))
 		goto nla_put_failure;
 	{
 		unsigned long now = jiffies;
-		long flush_delta = now - tbl->last_flush;
-		long rand_delta = now - tbl->last_rand;
+		long flush_delta = now - READ_ONCE(tbl->last_flush);
+		long rand_delta = now - READ_ONCE(tbl->last_rand);
 		struct neigh_hash_table *nht;
 		struct ndt_config ndc = {
 			.ndtc_key_len		= tbl->key_len,
@@ -2063,7 +2066,7 @@ static int neightbl_fill_info(struct sk_buff *skb, struct neigh_table *tbl,
 			.ndtc_entries		= atomic_read(&tbl->entries),
 			.ndtc_last_flush	= jiffies_to_msecs(flush_delta),
 			.ndtc_last_rand		= jiffies_to_msecs(rand_delta),
-			.ndtc_proxy_qlen	= tbl->proxy_queue.qlen,
+			.ndtc_proxy_qlen	= READ_ONCE(tbl->proxy_queue.qlen),
 		};
 
 		rcu_read_lock_bh();
@@ -2086,17 +2089,17 @@ static int neightbl_fill_info(struct sk_buff *skb, struct neigh_table *tbl,
 			struct neigh_statistics	*st;
 
 			st = per_cpu_ptr(tbl->stats, cpu);
-			ndst.ndts_allocs		+= st->allocs;
-			ndst.ndts_destroys		+= st->destroys;
-			ndst.ndts_hash_grows		+= st->hash_grows;
-			ndst.ndts_res_failed		+= st->res_failed;
-			ndst.ndts_lookups		+= st->lookups;
-			ndst.ndts_hits			+= st->hits;
-			ndst.ndts_rcv_probes_mcast	+= st->rcv_probes_mcast;
-			ndst.ndts_rcv_probes_ucast	+= st->rcv_probes_ucast;
-			ndst.ndts_periodic_gc_runs	+= st->periodic_gc_runs;
-			ndst.ndts_forced_gc_runs	+= st->forced_gc_runs;
-			ndst.ndts_table_fulls		+= st->table_fulls;
+			ndst.ndts_allocs		+= READ_ONCE(st->allocs);
+			ndst.ndts_destroys		+= READ_ONCE(st->destroys);
+			ndst.ndts_hash_grows		+= READ_ONCE(st->hash_grows);
+			ndst.ndts_res_failed		+= READ_ONCE(st->res_failed);
+			ndst.ndts_lookups		+= READ_ONCE(st->lookups);
+			ndst.ndts_hits			+= READ_ONCE(st->hits);
+			ndst.ndts_rcv_probes_mcast	+= READ_ONCE(st->rcv_probes_mcast);
+			ndst.ndts_rcv_probes_ucast	+= READ_ONCE(st->rcv_probes_ucast);
+			ndst.ndts_periodic_gc_runs	+= READ_ONCE(st->periodic_gc_runs);
+			ndst.ndts_forced_gc_runs	+= READ_ONCE(st->forced_gc_runs);
+			ndst.ndts_table_fulls		+= READ_ONCE(st->table_fulls);
 		}
 
 		if (nla_put_64bit(skb, NDTA_STATS, sizeof(ndst), &ndst,
@@ -2320,16 +2323,16 @@ static int neightbl_set(struct sk_buff *skb, struct nlmsghdr *nlh,
 		goto errout_tbl_lock;
 
 	if (tb[NDTA_THRESH1])
-		tbl->gc_thresh1 = nla_get_u32(tb[NDTA_THRESH1]);
+		WRITE_ONCE(tbl->gc_thresh1, nla_get_u32(tb[NDTA_THRESH1]));
 
 	if (tb[NDTA_THRESH2])
-		tbl->gc_thresh2 = nla_get_u32(tb[NDTA_THRESH2]);
+		WRITE_ONCE(tbl->gc_thresh2, nla_get_u32(tb[NDTA_THRESH2]));
 
 	if (tb[NDTA_THRESH3])
-		tbl->gc_thresh3 = nla_get_u32(tb[NDTA_THRESH3]);
+		WRITE_ONCE(tbl->gc_thresh3, nla_get_u32(tb[NDTA_THRESH3]));
 
 	if (tb[NDTA_GC_INTERVAL])
-		tbl->gc_interval = nla_get_msecs(tb[NDTA_GC_INTERVAL]);
+		WRITE_ONCE(tbl->gc_interval, nla_get_msecs(tb[NDTA_GC_INTERVAL]));
 
 	err = 0;
 
-- 
2.42.0

[PATCH 5.15 028/128] igc: Fix ambiguity in the ethtool advertising

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sasha Neftin <sasha.neftin@intel.com>

[ Upstream commit e7684d29efdf37304c62bb337ea55b3428ca118e ]

The 'ethtool_convert_link_mode_to_legacy_u32' method does not allow us to
advertise 2500M speed support and TP (twisted pair) properly. Convert to
'ethtool_link_ksettings_test_link_mode' to advertise supported speed and
eliminate ambiguity.

Fixes: 8c5ad0dae93c ("igc: Add ethtool support")
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Suggested-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231019203641.3661960-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igc/igc_ethtool.c | 35 ++++++++++++++------
 1 file changed, 25 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/intel/igc/igc_ethtool.c b/drivers/net/ethernet/intel/igc/igc_ethtool.c
index 17cb4c13d0020..3bffd2729a439 100644
--- a/drivers/net/ethernet/intel/igc/igc_ethtool.c
+++ b/drivers/net/ethernet/intel/igc/igc_ethtool.c
@@ -1810,7 +1810,7 @@ igc_ethtool_set_link_ksettings(struct net_device *netdev,
 	struct igc_adapter *adapter = netdev_priv(netdev);
 	struct net_device *dev = adapter->netdev;
 	struct igc_hw *hw = &adapter->hw;
-	u32 advertising;
+	u16 advertised = 0;
 
 	/* When adapter in resetting mode, autoneg/speed/duplex
 	 * cannot be changed
@@ -1835,18 +1835,33 @@ igc_ethtool_set_link_ksettings(struct net_device *netdev,
 	while (test_and_set_bit(__IGC_RESETTING, &adapter->state))
 		usleep_range(1000, 2000);
 
-	ethtool_convert_link_mode_to_legacy_u32(&advertising,
-						cmd->link_modes.advertising);
-	/* Converting to legacy u32 drops ETHTOOL_LINK_MODE_2500baseT_Full_BIT.
-	 * We have to check this and convert it to ADVERTISE_2500_FULL
-	 * (aka ETHTOOL_LINK_MODE_2500baseX_Full_BIT) explicitly.
-	 */
-	if (ethtool_link_ksettings_test_link_mode(cmd, advertising, 2500baseT_Full))
-		advertising |= ADVERTISE_2500_FULL;
+	if (ethtool_link_ksettings_test_link_mode(cmd, advertising,
+						  2500baseT_Full))
+		advertised |= ADVERTISE_2500_FULL;
+
+	if (ethtool_link_ksettings_test_link_mode(cmd, advertising,
+						  1000baseT_Full))
+		advertised |= ADVERTISE_1000_FULL;
+
+	if (ethtool_link_ksettings_test_link_mode(cmd, advertising,
+						  100baseT_Full))
+		advertised |= ADVERTISE_100_FULL;
+
+	if (ethtool_link_ksettings_test_link_mode(cmd, advertising,
+						  100baseT_Half))
+		advertised |= ADVERTISE_100_HALF;
+
+	if (ethtool_link_ksettings_test_link_mode(cmd, advertising,
+						  10baseT_Full))
+		advertised |= ADVERTISE_10_FULL;
+
+	if (ethtool_link_ksettings_test_link_mode(cmd, advertising,
+						  10baseT_Half))
+		advertised |= ADVERTISE_10_HALF;
 
 	if (cmd->base.autoneg == AUTONEG_ENABLE) {
 		hw->mac.autoneg = 1;
-		hw->phy.autoneg_advertised = advertising;
+		hw->phy.autoneg_advertised = advertised;
 		if (adapter->fc_autoneg)
 			hw->fc.requested_mode = igc_fc_default;
 	} else {
-- 
2.42.0

[PATCH 5.15 029/128] net: ieee802154: adf7242: Fix some potential buffer overflow in adf7242_stats_show()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit ca082f019d8fbb983f03080487946da714154bae ]

strncat() usage in adf7242_debugfs_init() is wrong.
The size given to strncat() is the maximum number of bytes that can be
written, excluding the trailing NULL.

Here, the size that is passed, DNAME_INLINE_LEN, does not take into account
the size of "adf7242-" that is already in the array.

In order to fix it, use snprintf() instead.

Fixes: 7302b9d90117 ("ieee802154/adf7242: Driver for ADF7242 MAC IEEE802154")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ieee802154/adf7242.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ieee802154/adf7242.c b/drivers/net/ieee802154/adf7242.c
index 07adbeec19787..14cf8b0dfad90 100644
--- a/drivers/net/ieee802154/adf7242.c
+++ b/drivers/net/ieee802154/adf7242.c
@@ -1162,9 +1162,10 @@ static int adf7242_stats_show(struct seq_file *file, void *offset)
 
 static void adf7242_debugfs_init(struct adf7242_local *lp)
 {
-	char debugfs_dir_name[DNAME_INLINE_LEN + 1] = "adf7242-";
+	char debugfs_dir_name[DNAME_INLINE_LEN + 1];
 
-	strncat(debugfs_dir_name, dev_name(&lp->spi->dev), DNAME_INLINE_LEN);
+	snprintf(debugfs_dir_name, sizeof(debugfs_dir_name),
+		 "adf7242-%s", dev_name(&lp->spi->dev));
 
 	lp->debugfs_root = debugfs_create_dir(debugfs_dir_name, NULL);
 
-- 
2.42.0

[PATCH 5.15 030/128] net: usb: smsc95xx: Fix uninit-value access in smsc95xx_read_reg

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shigeru Yoshida <syoshida@redhat.com>

[ Upstream commit 51a32e828109b4a209efde44505baa356b37a4ce ]

syzbot reported the following uninit-value access issue [1]:

smsc95xx 1-1:0.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x00000030: -32
smsc95xx 1-1:0.0 (unnamed net_device) (uninitialized): Error reading E2P_CMD
=====================================================
BUG: KMSAN: uninit-value in smsc95xx_reset+0x409/0x25f0 drivers/net/usb/smsc95xx.c:896
 smsc95xx_reset+0x409/0x25f0 drivers/net/usb/smsc95xx.c:896
 smsc95xx_bind+0x9bc/0x22e0 drivers/net/usb/smsc95xx.c:1131
 usbnet_probe+0x100b/0x4060 drivers/net/usb/usbnet.c:1750
 usb_probe_interface+0xc75/0x1210 drivers/usb/core/driver.c:396
 really_probe+0x506/0xf40 drivers/base/dd.c:658
 __driver_probe_device+0x2a7/0x5d0 drivers/base/dd.c:800
 driver_probe_device+0x72/0x7b0 drivers/base/dd.c:830
 __device_attach_driver+0x55a/0x8f0 drivers/base/dd.c:958
 bus_for_each_drv+0x3ff/0x620 drivers/base/bus.c:457
 __device_attach+0x3bd/0x640 drivers/base/dd.c:1030
 device_initial_probe+0x32/0x40 drivers/base/dd.c:1079
 bus_probe_device+0x3d8/0x5a0 drivers/base/bus.c:532
 device_add+0x16ae/0x1f20 drivers/base/core.c:3622
 usb_set_configuration+0x31c9/0x38c0 drivers/usb/core/message.c:2207
 usb_generic_driver_probe+0x109/0x2a0 drivers/usb/core/generic.c:238
 usb_probe_device+0x290/0x4a0 drivers/usb/core/driver.c:293
 really_probe+0x506/0xf40 drivers/base/dd.c:658
 __driver_probe_device+0x2a7/0x5d0 drivers/base/dd.c:800
 driver_probe_device+0x72/0x7b0 drivers/base/dd.c:830
 __device_attach_driver+0x55a/0x8f0 drivers/base/dd.c:958
 bus_for_each_drv+0x3ff/0x620 drivers/base/bus.c:457
 __device_attach+0x3bd/0x640 drivers/base/dd.c:1030
 device_initial_probe+0x32/0x40 drivers/base/dd.c:1079
 bus_probe_device+0x3d8/0x5a0 drivers/base/bus.c:532
 device_add+0x16ae/0x1f20 drivers/base/core.c:3622
 usb_new_device+0x15f6/0x22f0 drivers/usb/core/hub.c:2589
 hub_port_connect drivers/usb/core/hub.c:5440 [inline]
 hub_port_connect_change drivers/usb/core/hub.c:5580 [inline]
 port_event drivers/usb/core/hub.c:5740 [inline]
 hub_event+0x53bc/0x7290 drivers/usb/core/hub.c:5822
 process_one_work kernel/workqueue.c:2630 [inline]
 process_scheduled_works+0x104e/0x1e70 kernel/workqueue.c:2703
 worker_thread+0xf45/0x1490 kernel/workqueue.c:2784
 kthread+0x3e8/0x540 kernel/kthread.c:388
 ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

Local variable buf.i225 created at:
 smsc95xx_read_reg drivers/net/usb/smsc95xx.c:90 [inline]
 smsc95xx_reset+0x203/0x25f0 drivers/net/usb/smsc95xx.c:892
 smsc95xx_bind+0x9bc/0x22e0 drivers/net/usb/smsc95xx.c:1131

CPU: 1 PID: 773 Comm: kworker/1:2 Not tainted 6.6.0-rc1-syzkaller-00125-ge42bebf6db29 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023
Workqueue: usb_hub_wq hub_event
=====================================================

Similar to e9c65989920f ("net: usb: smsc75xx: Fix uninit-value access in
__smsc75xx_read_reg"), this issue is caused because usbnet_read_cmd() reads
less bytes than requested (zero byte in the reproducer). In this case,
'buf' is not properly filled.

This patch fixes the issue by returning -ENODATA if usbnet_read_cmd() reads
less bytes than requested.

sysbot reported similar uninit-value access issue [2]. The root cause is
the same as mentioned above, and this patch addresses it as well.

Fixes: 2f7ca802bdae ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver")
Reported-and-tested-by: syzbot+c74c24b43c9ae534f0e0@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+2c97a98a5ba9ea9c23bd@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c74c24b43c9ae534f0e0 [1]
Closes: https://syzkaller.appspot.com/bug?extid=2c97a98a5ba9ea9c23bd [2]
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/smsc95xx.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 16a6cdf025151..5f962f58ff496 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -84,7 +84,9 @@ static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index,
 	ret = fn(dev, USB_VENDOR_REQUEST_READ_REGISTER, USB_DIR_IN
 		 | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 		 0, index, &buf, 4);
-	if (ret < 0) {
+	if (ret < 4) {
+		ret = ret < 0 ? ret : -ENODATA;
+
 		if (ret != -ENODEV)
 			netdev_warn(dev->net, "Failed to read reg index 0x%08x: %d\n",
 				    index, ret);
-- 
2.42.0

[PATCH 5.15 031/128] r8152: Increase USB control msg timeout to 5000ms as per spec

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit a5feba71ec9c14a54c3babdc732c5b6866d8ee43 ]

According to the comment next to USB_CTRL_GET_TIMEOUT and
USB_CTRL_SET_TIMEOUT, although sending/receiving control messages is
usually quite fast, the spec allows them to take up to 5 seconds.
Let's increase the timeout in the Realtek driver from 500ms to 5000ms
(using the #defines) to account for this.

This is not just a theoretical change. The need for the longer timeout
was seen in testing. Specifically, if you drop a sc7180-trogdor based
Chromebook into the kdb debugger and then "go" again after sitting in
the debugger for a while, the next USB control message takes a long
time. Out of ~40 tests the slowest USB control message was 4.5
seconds.

While dropping into kdb is not exactly an end-user scenario, the above
is similar to what could happen due to an temporary interrupt storm,
what could happen if there was a host controller (HW or SW) issue, or
what could happen if the Realtek device got into a confused state and
needed time to recover.

This change is fairly critical since the r8152 driver in Linux doesn't
expect register reads/writes (which are backed by USB control
messages) to fail.

Fixes: ac718b69301c ("net/usb: new driver for RTL8152")
Suggested-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/r8152.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 4cd9bcca84c5b..89a1e40ff7005 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1208,7 +1208,7 @@ int get_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data)
 
 	ret = usb_control_msg(tp->udev, tp->pipe_ctrl_in,
 			      RTL8152_REQ_GET_REGS, RTL8152_REQT_READ,
-			      value, index, tmp, size, 500);
+			      value, index, tmp, size, USB_CTRL_GET_TIMEOUT);
 	if (ret < 0)
 		memset(data, 0xff, size);
 	else
@@ -1231,7 +1231,7 @@ int set_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data)
 
 	ret = usb_control_msg(tp->udev, tp->pipe_ctrl_out,
 			      RTL8152_REQ_SET_REGS, RTL8152_REQT_WRITE,
-			      value, index, tmp, size, 500);
+			      value, index, tmp, size, USB_CTRL_SET_TIMEOUT);
 
 	kfree(tmp);
 
@@ -9538,7 +9538,8 @@ u8 rtl8152_get_version(struct usb_interface *intf)
 
 	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 			      RTL8152_REQ_GET_REGS, RTL8152_REQT_READ,
-			      PLA_TCR0, MCU_TYPE_PLA, tmp, sizeof(*tmp), 500);
+			      PLA_TCR0, MCU_TYPE_PLA, tmp, sizeof(*tmp),
+			      USB_CTRL_GET_TIMEOUT);
 	if (ret > 0)
 		ocp_data = (__le32_to_cpu(*tmp) >> 16) & VERSION_MASK;
 
-- 
2.42.0

[PATCH 5.15 032/128] r8152: Run the unload routine if we have errors during probe

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit 5dd17689526971c5ae12bc8398f34bd68cd0499e ]

The rtl8152_probe() function lacks a call to the chip-specific
unload() routine when it sees an error in probe. Add it in to match
the cleanup code in rtl8152_disconnect().

Fixes: ac718b69301c ("net/usb: new driver for RTL8152")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/r8152.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 89a1e40ff7005..52056b296b9f7 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -9799,6 +9799,8 @@ static int rtl8152_probe(struct usb_interface *intf,
 
 out1:
 	tasklet_kill(&tp->tx_tl);
+	if (tp->rtl_ops.unload)
+		tp->rtl_ops.unload(tp);
 	usb_set_intfdata(intf, NULL);
 out:
 	free_netdev(netdev);
-- 
2.42.0

[PATCH 5.15 033/128] r8152: Cancel hw_phy_work if we have an error in probe

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit bb8adff9123e492598162ac1baad01a53891aef6 ]

The error handling in rtl8152_probe() is missing a call to cancel the
hw_phy_work. Add it in to match what's in the cleanup code in
rtl8152_disconnect().

Fixes: a028a9e003f2 ("r8152: move the settings of PHY to a work queue")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/r8152.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 52056b296b9f7..baa3c57d16427 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -9799,6 +9799,7 @@ static int rtl8152_probe(struct usb_interface *intf,
 
 out1:
 	tasklet_kill(&tp->tx_tl);
+	cancel_delayed_work_sync(&tp->hw_phy_work);
 	if (tp->rtl_ops.unload)
 		tp->rtl_ops.unload(tp);
 	usb_set_intfdata(intf, NULL);
-- 
2.42.0

[PATCH 5.15 034/128] r8152: Release firmware if we have an error in probe

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit b8d35024d4059ca550cba11ac9ab23a6c238d929 ]

The error handling in rtl8152_probe() is missing a call to release
firmware. Add it in to match what's in the cleanup code in
rtl8152_disconnect().

Fixes: 9370f2d05a2a ("r8152: support request_firmware for RTL8153")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/r8152.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index baa3c57d16427..f6d5fbb9dee07 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -9802,6 +9802,7 @@ static int rtl8152_probe(struct usb_interface *intf,
 	cancel_delayed_work_sync(&tp->hw_phy_work);
 	if (tp->rtl_ops.unload)
 		tp->rtl_ops.unload(tp);
+	rtl8152_release_firmware(tp);
 	usb_set_intfdata(intf, NULL);
 out:
 	free_netdev(netdev);
-- 
2.42.0

[PATCH 5.15 035/128] tcp: fix wrong RTO timeout when received SACK reneging

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Fred Chen <fred.chenchen03@gmail.com>

[ Upstream commit d2a0fc372aca561556e765d0a9ec365c7c12f0ad ]

This commit fix wrong RTO timeout when received SACK reneging.

When an ACK arrived pointing to a SACK reneging, tcp_check_sack_reneging()
will rearm the RTO timer for min(1/2*srtt, 10ms) into to the future.

But since the commit 62d9f1a6945b ("tcp: fix TLP timer not set when
CA_STATE changes from DISORDER to OPEN") merged, the tcp_set_xmit_timer()
is moved after tcp_fastretrans_alert()(which do the SACK reneging check),
so the RTO timeout will be overwrited by tcp_set_xmit_timer() with
icsk_rto instead of 1/2*srtt.

Here is a packetdrill script to check this bug:
0     socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0    bind(3, ..., ...) = 0
+0    listen(3, 1) = 0

// simulate srtt to 100ms
+0    < S 0:0(0) win 32792 <mss 1000, sackOK,nop,nop,nop,wscale 7>
+0    > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7>
+.1    < . 1:1(0) ack 1 win 1024

+0    accept(3, ..., ...) = 4

+0    write(4, ..., 10000) = 10000
+0    > P. 1:10001(10000) ack 1

// inject sack
+.1    < . 1:1(0) ack 1 win 257 <sack 1001:10001,nop,nop>
+0    > . 1:1001(1000) ack 1

// inject sack reneging
+.1    < . 1:1(0) ack 1001 win 257 <sack 9001:10001,nop,nop>

// we expect rto fired in 1/2*srtt (50ms)
+.05    > . 1001:2001(1000) ack 1

This fix remove the FLAG_SET_XMIT_TIMER from ack_flag when
tcp_check_sack_reneging() set RTO timer with 1/2*srtt to avoid
being overwrited later.

Fixes: 62d9f1a6945b ("tcp: fix TLP timer not set when CA_STATE changes from DISORDER to OPEN")
Signed-off-by: Fred Chen <fred.chenchen03@gmail.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp_input.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index d1e431ad5f619..8e4b42d394bed 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -2195,16 +2195,17 @@ void tcp_enter_loss(struct sock *sk)
  * restore sanity to the SACK scoreboard. If the apparent reneging
  * persists until this RTO then we'll clear the SACK scoreboard.
  */
-static bool tcp_check_sack_reneging(struct sock *sk, int flag)
+static bool tcp_check_sack_reneging(struct sock *sk, int *ack_flag)
 {
-	if (flag & FLAG_SACK_RENEGING &&
-	    flag & FLAG_SND_UNA_ADVANCED) {
+	if (*ack_flag & FLAG_SACK_RENEGING &&
+	    *ack_flag & FLAG_SND_UNA_ADVANCED) {
 		struct tcp_sock *tp = tcp_sk(sk);
 		unsigned long delay = max(usecs_to_jiffies(tp->srtt_us >> 4),
 					  msecs_to_jiffies(10));
 
 		inet_csk_reset_xmit_timer(sk, ICSK_TIME_RETRANS,
 					  delay, TCP_RTO_MAX);
+		*ack_flag &= ~FLAG_SET_XMIT_TIMER;
 		return true;
 	}
 	return false;
@@ -2974,7 +2975,7 @@ static void tcp_fastretrans_alert(struct sock *sk, const u32 prior_snd_una,
 		tp->prior_ssthresh = 0;
 
 	/* B. In all the states check for reneging SACKs. */
-	if (tcp_check_sack_reneging(sk, flag))
+	if (tcp_check_sack_reneging(sk, ack_flag))
 		return;
 
 	/* C. Check consistency of the current state. */
-- 
2.42.0

[PATCH 5.15 036/128] gtp: uapi: fix GTPA_MAX

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit adc8df12d91a2b8350b0cd4c7fec3e8546c9d1f8 ]

Subtract one to __GTPA_MAX, otherwise GTPA_MAX is off by 2.

Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/uapi/linux/gtp.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/uapi/linux/gtp.h b/include/uapi/linux/gtp.h
index 79f9191bbb24c..82d0e58ec3ce2 100644
--- a/include/uapi/linux/gtp.h
+++ b/include/uapi/linux/gtp.h
@@ -32,6 +32,6 @@ enum gtp_attrs {
 	GTPA_PAD,
 	__GTPA_MAX,
 };
-#define GTPA_MAX (__GTPA_MAX + 1)
+#define GTPA_MAX (__GTPA_MAX - 1)
 
 #endif /* _UAPI_LINUX_GTP_H_ */
-- 
2.42.0

[PATCH 5.15 037/128] gtp: fix fragmentation needed check with gso

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit 4530e5b8e2dad63dcad2206232dd86e4b1489b6c ]

Call skb_gso_validate_network_len() to check if packet is over PMTU.

Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/gtp.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c
index a3878aef0ea4a..69bbc868b9477 100644
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -543,8 +543,9 @@ static int gtp_build_skb_ip4(struct sk_buff *skb, struct net_device *dev,
 
 	rt->dst.ops->update_pmtu(&rt->dst, NULL, skb, mtu, false);
 
-	if (!skb_is_gso(skb) && (iph->frag_off & htons(IP_DF)) &&
-	    mtu < ntohs(iph->tot_len)) {
+	if (iph->frag_off & htons(IP_DF) &&
+	    ((!skb_is_gso(skb) && skb->len > mtu) ||
+	     (skb_is_gso(skb) && !skb_gso_validate_network_len(skb, mtu)))) {
 		netdev_dbg(dev, "packet too big, fragmentation needed\n");
 		icmp_ndo_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED,
 			      htonl(mtu));
-- 
2.42.0

[PATCH 5.15 038/128] i40e: Fix wrong check for I40E_TXR_FLAGS_WB_ON_ITR

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ivan Vecera <ivecera@redhat.com>

[ Upstream commit 77a8c982ff0d4c3a14022c6fe9e3dbfb327552ec ]

The I40E_TXR_FLAGS_WB_ON_ITR is i40e_ring flag and not i40e_pf one.

Fixes: 8e0764b4d6be42 ("i40e/i40evf: Add support for writeback on ITR feature for X722")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231023212714.178032-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 9787e794eeda6..1d096141625eb 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -2759,7 +2759,7 @@ int i40e_napi_poll(struct napi_struct *napi, int budget)
 		return budget;
 	}
 
-	if (vsi->back->flags & I40E_TXR_FLAGS_WB_ON_ITR)
+	if (q_vector->tx.ring[0].flags & I40E_TXR_FLAGS_WB_ON_ITR)
 		q_vector->arm_wb_state = false;
 
 	/* Exit the polling mode, but don't re-enable interrupts if stack might
-- 
2.42.0

[PATCH 5.15 039/128] kasan: print the original fault addr when access invalid shadow

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Haibo Li <haibo.li@mediatek.com>

commit babddbfb7d7d70ae7f10fedd75a45d8ad75fdddf upstream.

when the checked address is illegal,the corresponding shadow address from
kasan_mem_to_shadow may have no mapping in mmu table.  Access such shadow
address causes kernel oops.  Here is a sample about oops on arm64(VA
39bit) with KASAN_SW_TAGS and KASAN_OUTLINE on:

[ffffffb80aaaaaaa] pgd=000000005d3ce003, p4d=000000005d3ce003,
    pud=000000005d3ce003, pmd=0000000000000000
Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP
Modules linked in:
CPU: 3 PID: 100 Comm: sh Not tainted 6.6.0-rc1-dirty #43
Hardware name: linux,dummy-virt (DT)
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __hwasan_load8_noabort+0x5c/0x90
lr : do_ib_ob+0xf4/0x110
ffffffb80aaaaaaa is the shadow address for efffff80aaaaaaaa.
The problem is reading invalid shadow in kasan_check_range.

The generic kasan also has similar oops.

It only reports the shadow address which causes oops but not
the original address.

Commit 2f004eea0fc8("x86/kasan: Print original address on #GP")
introduce to kasan_non_canonical_hook but limit it to KASAN_INLINE.

This patch extends it to KASAN_OUTLINE mode.

Link: https://lkml.kernel.org/r/20231009073748.159228-1-haibo.li@mediatek.com
Fixes: 2f004eea0fc8("x86/kasan: Print original address on #GP")
Signed-off-by: Haibo Li <haibo.li@mediatek.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Haibo Li <haibo.li@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/kasan.h |    6 +++---
 mm/kasan/report.c     |    4 +---
 2 files changed, 4 insertions(+), 6 deletions(-)

--- a/include/linux/kasan.h
+++ b/include/linux/kasan.h
@@ -471,10 +471,10 @@ static inline void kasan_free_shadow(con
 
 #endif /* (CONFIG_KASAN_GENERIC || CONFIG_KASAN_SW_TAGS) && !CONFIG_KASAN_VMALLOC */
 
-#ifdef CONFIG_KASAN_INLINE
+#ifdef CONFIG_KASAN
 void kasan_non_canonical_hook(unsigned long addr);
-#else /* CONFIG_KASAN_INLINE */
+#else /* CONFIG_KASAN */
 static inline void kasan_non_canonical_hook(unsigned long addr) { }
-#endif /* CONFIG_KASAN_INLINE */
+#endif /* CONFIG_KASAN */
 
 #endif /* LINUX_KASAN_H */
--- a/mm/kasan/report.c
+++ b/mm/kasan/report.c
@@ -457,9 +457,8 @@ bool kasan_report(unsigned long addr, si
 	return ret;
 }
 
-#ifdef CONFIG_KASAN_INLINE
 /*
- * With CONFIG_KASAN_INLINE, accesses to bogus pointers (outside the high
+ * With CONFIG_KASAN, accesses to bogus pointers (outside the high
  * canonical half of the address space) cause out-of-bounds shadow memory reads
  * before the actual access. For addresses in the low canonical half of the
  * address space, as well as most non-canonical addresses, that out-of-bounds
@@ -495,4 +494,3 @@ void kasan_non_canonical_hook(unsigned l
 	pr_alert("KASAN: %s in range [0x%016lx-0x%016lx]\n", bug_type,
 		 orig_addr, orig_addr + KASAN_GRANULE_SIZE - 1);
 }
-#endif

[PATCH 5.15 040/128] iio: exynos-adc: request second interupt only when touchscreen mode is used

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marek Szyprowski <m.szyprowski@samsung.com>

commit 865b080e3229102f160889328ce2e8e97aa65ea0 upstream.

Second interrupt is needed only when touchscreen mode is used, so don't
request it unconditionally. This removes the following annoying warning
during boot:

exynos-adc 14d10000.adc: error -ENXIO: IRQ index 1 not found

Fixes: 2bb8ad9b44c5 ("iio: exynos-adc: add experimental touchscreen support")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20231009101412.916922-1-m.szyprowski@samsung.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/adc/exynos_adc.c |   26 +++++++++++++++-----------
 1 file changed, 15 insertions(+), 11 deletions(-)

--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -826,16 +826,26 @@ static int exynos_adc_probe(struct platf
 		}
 	}
 
+	/* leave out any TS related code if unreachable */
+	if (IS_REACHABLE(CONFIG_INPUT)) {
+		has_ts = of_property_read_bool(pdev->dev.of_node,
+					       "has-touchscreen") || pdata;
+	}
+
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
 		return irq;
 	info->irq = irq;
 
-	irq = platform_get_irq(pdev, 1);
-	if (irq == -EPROBE_DEFER)
-		return irq;
-
-	info->tsirq = irq;
+	if (has_ts) {
+		irq = platform_get_irq(pdev, 1);
+		if (irq == -EPROBE_DEFER)
+			return irq;
+
+		info->tsirq = irq;
+	} else {
+		info->tsirq = -1;
+	}
 
 	info->dev = &pdev->dev;
 
@@ -900,12 +910,6 @@ static int exynos_adc_probe(struct platf
 	if (info->data->init_hw)
 		info->data->init_hw(info);
 
-	/* leave out any TS related code if unreachable */
-	if (IS_REACHABLE(CONFIG_INPUT)) {
-		has_ts = of_property_read_bool(pdev->dev.of_node,
-					       "has-touchscreen") || pdata;
-	}
-
 	if (pdata)
 		info->delay = pdata->delay;
 	else

[PATCH 5.15 041/128] iio: adc: xilinx-xadc: Dont clobber preset voltage/temperature thresholds

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Robert Hancock <robert.hancock@calian.com>

commit 8d6b3ea4d9eaca80982442b68a292ce50ce0a135 upstream.

In the probe function, the driver was reading out the thresholds already
set in the core, which can be configured by the user in the Vivado tools
when the FPGA image is built. However, it later clobbered those values
with zero or maximum values. In particular, the overtemperature shutdown
threshold register was overwritten with the max value, which effectively
prevents the FPGA from shutting down when the desired threshold was
eached, potentially risking hardware damage in that case.

Remove this code to leave the preconfigured default threshold values
intact.

The code was also disabling all alarms regardless of what enable state
they were left in by the FPGA image, including the overtemperature
shutdown feature. Leave these bits in their original state so they are
not unconditionally disabled.

Fixes: bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Acked-by: O'Griofa, Conall <conall.ogriofa@amd.com>
Tested-by: O'Griofa, Conall <conall.ogriofa@amd.com>
Link: https://lore.kernel.org/r/20230915001019.2862964-2-robert.hancock@calian.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/adc/xilinx-xadc-core.c |   22 ----------------------
 1 file changed, 22 deletions(-)

--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -1434,28 +1434,6 @@ static int xadc_probe(struct platform_de
 	if (ret)
 		return ret;
 
-	/* Disable all alarms */
-	ret = xadc_update_adc_reg(xadc, XADC_REG_CONF1, XADC_CONF1_ALARM_MASK,
-				  XADC_CONF1_ALARM_MASK);
-	if (ret)
-		return ret;
-
-	/* Set thresholds to min/max */
-	for (i = 0; i < 16; i++) {
-		/*
-		 * Set max voltage threshold and both temperature thresholds to
-		 * 0xffff, min voltage threshold to 0.
-		 */
-		if (i % 8 < 4 || i == 7)
-			xadc->threshold[i] = 0xffff;
-		else
-			xadc->threshold[i] = 0;
-		ret = xadc_write_adc_reg(xadc, XADC_REG_THRESHOLD(i),
-			xadc->threshold[i]);
-		if (ret)
-			return ret;
-	}
-
 	/* Go to non-buffered mode */
 	xadc_postdisable(indio_dev);
 

[PATCH 5.15 042/128] iio: adc: xilinx-xadc: Correct temperature offset/scale for UltraScale

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Robert Hancock <robert.hancock@calian.com>

commit e2bd8c28b9bd835077eb65715d416d667694a80d upstream.

The driver was previously using offset and scale values for the
temperature sensor readings which were only valid for 7-series devices.
Add per-device-type values for offset and scale and set them appropriately
for each device type.

Note that the values used for the UltraScale family are for UltraScale+
(i.e. the SYSMONE4 primitive) using the internal reference, as that seems
to be the most common configuration and the device tree values Xilinx's
device tree generator produces don't seem to give us anything to tell us
which configuration is used. However, the differences within the UltraScale
family seem fairly minor and it's closer than using the 7-series values
instead in any case.

Fixes: c2b7720a7905 ("iio: xilinx-xadc: Add basic support for Ultrascale System Monitor")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Acked-by: O'Griofa, Conall <conall.ogriofa@amd.com>
Tested-by: O'Griofa, Conall <conall.ogriofa@amd.com>
Link: https://lore.kernel.org/r/20230915001019.2862964-3-robert.hancock@calian.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/adc/xilinx-xadc-core.c |   17 ++++++++++++++---
 drivers/iio/adc/xilinx-xadc.h      |    2 ++
 2 files changed, 16 insertions(+), 3 deletions(-)

--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -454,6 +454,9 @@ static const struct xadc_ops xadc_zynq_o
 	.interrupt_handler = xadc_zynq_interrupt_handler,
 	.update_alarm = xadc_zynq_update_alarm,
 	.type = XADC_TYPE_S7,
+	/* Temp in C = (val * 503.975) / 2**bits - 273.15 */
+	.temp_scale = 503975,
+	.temp_offset = 273150,
 };
 
 static const unsigned int xadc_axi_reg_offsets[] = {
@@ -564,6 +567,9 @@ static const struct xadc_ops xadc_7s_axi
 	.interrupt_handler = xadc_axi_interrupt_handler,
 	.flags = XADC_FLAGS_BUFFERED,
 	.type = XADC_TYPE_S7,
+	/* Temp in C = (val * 503.975) / 2**bits - 273.15 */
+	.temp_scale = 503975,
+	.temp_offset = 273150,
 };
 
 static const struct xadc_ops xadc_us_axi_ops = {
@@ -575,6 +581,12 @@ static const struct xadc_ops xadc_us_axi
 	.interrupt_handler = xadc_axi_interrupt_handler,
 	.flags = XADC_FLAGS_BUFFERED,
 	.type = XADC_TYPE_US,
+	/**
+	 * Values below are for UltraScale+ (SYSMONE4) using internal reference.
+	 * See https://docs.xilinx.com/v/u/en-US/ug580-ultrascale-sysmon
+	 */
+	.temp_scale = 509314,
+	.temp_offset = 280231,
 };
 
 static int _xadc_update_adc_reg(struct xadc *xadc, unsigned int reg,
@@ -946,8 +958,7 @@ static int xadc_read_raw(struct iio_dev
 			*val2 = chan->scan_type.realbits;
 			return IIO_VAL_FRACTIONAL_LOG2;
 		case IIO_TEMP:
-			/* Temp in C = (val * 503.975) / 2**bits - 273.15 */
-			*val = 503975;
+			*val = xadc->ops->temp_scale;
 			*val2 = bits;
 			return IIO_VAL_FRACTIONAL_LOG2;
 		default:
@@ -955,7 +966,7 @@ static int xadc_read_raw(struct iio_dev
 		}
 	case IIO_CHAN_INFO_OFFSET:
 		/* Only the temperature channel has an offset */
-		*val = -((273150 << bits) / 503975);
+		*val = -((xadc->ops->temp_offset << bits) / xadc->ops->temp_scale);
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		ret = xadc_read_samplerate(xadc);
--- a/drivers/iio/adc/xilinx-xadc.h
+++ b/drivers/iio/adc/xilinx-xadc.h
@@ -86,6 +86,8 @@ struct xadc_ops {
 
 	unsigned int flags;
 	enum xadc_type type;
+	int temp_scale;
+	int temp_offset;
 };
 
 static inline int _xadc_read_adc_reg(struct xadc *xadc, unsigned int reg,

[PATCH 5.15 043/128] i2c: muxes: i2c-mux-pinctrl: Use of_get_i2c_adapter_by_node()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Herve Codina <herve.codina@bootlin.com>

commit 3171d37b58a76e1febbf3f4af2d06234a98cf88b upstream.

i2c-mux-pinctrl uses the pair of_find_i2c_adapter_by_node() /
i2c_put_adapter(). These pair alone is not correct to properly lock the
I2C parent adapter.

Indeed, i2c_put_adapter() decrements the module refcount while
of_find_i2c_adapter_by_node() does not increment it. This leads to an
underflow of the parent module refcount.

Use the dedicated function, of_get_i2c_adapter_by_node(), to handle
correctly the module refcount.

Fixes: c4aee3e1b0de ("i2c: mux: pinctrl: remove platform_data")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Cc: stable@vger.kernel.org
Acked-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/muxes/i2c-mux-pinctrl.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/i2c/muxes/i2c-mux-pinctrl.c
+++ b/drivers/i2c/muxes/i2c-mux-pinctrl.c
@@ -62,7 +62,7 @@ static struct i2c_adapter *i2c_mux_pinct
 		dev_err(dev, "Cannot parse i2c-parent\n");
 		return ERR_PTR(-ENODEV);
 	}
-	parent = of_find_i2c_adapter_by_node(parent_np);
+	parent = of_get_i2c_adapter_by_node(parent_np);
 	of_node_put(parent_np);
 	if (!parent)
 		return ERR_PTR(-EPROBE_DEFER);

[PATCH 5.15 044/128] i2c: muxes: i2c-mux-gpmux: Use of_get_i2c_adapter_by_node()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Herve Codina <herve.codina@bootlin.com>

commit 3dc0ec46f6e7511fc4fdf6b6cda439382bc957f1 upstream.

i2c-mux-gpmux uses the pair of_find_i2c_adapter_by_node() /
i2c_put_adapter(). These pair alone is not correct to properly lock the
I2C parent adapter.

Indeed, i2c_put_adapter() decrements the module refcount while
of_find_i2c_adapter_by_node() does not increment it. This leads to an
underflow of the parent module refcount.

Use the dedicated function, of_get_i2c_adapter_by_node(), to handle
correctly the module refcount.

Fixes: ac8498f0ce53 ("i2c: i2c-mux-gpmux: new driver")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Cc: stable@vger.kernel.org
Acked-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/muxes/i2c-mux-gpmux.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/i2c/muxes/i2c-mux-gpmux.c
+++ b/drivers/i2c/muxes/i2c-mux-gpmux.c
@@ -52,7 +52,7 @@ static struct i2c_adapter *mux_parent_ad
 		dev_err(dev, "Cannot parse i2c-parent\n");
 		return ERR_PTR(-ENODEV);
 	}
-	parent = of_find_i2c_adapter_by_node(parent_np);
+	parent = of_get_i2c_adapter_by_node(parent_np);
 	of_node_put(parent_np);
 	if (!parent)
 		return ERR_PTR(-EPROBE_DEFER);

[PATCH 5.15 045/128] i2c: muxes: i2c-demux-pinctrl: Use of_get_i2c_adapter_by_node()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Herve Codina <herve.codina@bootlin.com>

commit 0fb118de5003028ad092a4e66fc6d07b86c3bc94 upstream.

i2c-demux-pinctrl uses the pair of_find_i2c_adapter_by_node() /
i2c_put_adapter(). These pair alone is not correct to properly lock the
I2C parent adapter.

Indeed, i2c_put_adapter() decrements the module refcount while
of_find_i2c_adapter_by_node() does not increment it. This leads to an
underflow of the parent module refcount.

Use the	dedicated function, of_get_i2c_adapter_by_node(), to handle
correctly the module refcount.

Fixes: 50a5ba876908 ("i2c: mux: demux-pinctrl: add driver")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Cc: stable@vger.kernel.org
Acked-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/muxes/i2c-demux-pinctrl.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/i2c/muxes/i2c-demux-pinctrl.c
+++ b/drivers/i2c/muxes/i2c-demux-pinctrl.c
@@ -61,7 +61,7 @@ static int i2c_demux_activate_master(str
 	if (ret)
 		goto err;
 
-	adap = of_find_i2c_adapter_by_node(priv->chan[new_chan].parent_np);
+	adap = of_get_i2c_adapter_by_node(priv->chan[new_chan].parent_np);
 	if (!adap) {
 		ret = -ENODEV;
 		goto err_with_revert;

[PATCH 5.15 046/128] i2c: stm32f7: Fix PEC handling in case of SMBUS transfers

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alain Volmat <alain.volmat@foss.st.com>

commit c896ff2dd8f30a6b0a922c83a96f6d43f05f0e92 upstream.

In case of SMBUS byte read with PEC enabled, the whole transfer
is split into two commands.  A first write command, followed by
a read command.  The write command does not have any PEC byte
and a PEC byte is appended at the end of the read command.
(cf Read byte protocol with PEC in SMBUS specification)

Within the STM32 I2C controller, handling (either sending
or receiving) of the PEC byte is done via the PECBYTE bit in
register CR2.

Currently, the PECBYTE is set at the beginning of a transfer,
which lead to sending a PEC byte at the end of the write command
(hence losing the real last byte), and also does not check the
PEC byte received during the read command.

This patch corrects the function stm32f7_i2c_smbus_xfer_msg
in order to only set the PECBYTE during the read command.

Fixes: 9e48155f6bfe ("i2c: i2c-stm32f7: Add initial SMBus protocols support")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/busses/i2c-stm32f7.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -1063,9 +1063,10 @@ static int stm32f7_i2c_smbus_xfer_msg(st
 	/* Configure PEC */
 	if ((flags & I2C_CLIENT_PEC) && f7_msg->size != I2C_SMBUS_QUICK) {
 		cr1 |= STM32F7_I2C_CR1_PECEN;
-		cr2 |= STM32F7_I2C_CR2_PECBYTE;
-		if (!f7_msg->read_write)
+		if (!f7_msg->read_write) {
+			cr2 |= STM32F7_I2C_CR2_PECBYTE;
 			f7_msg->count++;
+		}
 	} else {
 		cr1 &= ~STM32F7_I2C_CR1_PECEN;
 		cr2 &= ~STM32F7_I2C_CR2_PECBYTE;
@@ -1153,8 +1154,10 @@ static void stm32f7_i2c_smbus_rep_start(
 	f7_msg->stop = true;
 
 	/* Add one byte for PEC if needed */
-	if (cr1 & STM32F7_I2C_CR1_PECEN)
+	if (cr1 & STM32F7_I2C_CR1_PECEN) {
+		cr2 |= STM32F7_I2C_CR2_PECBYTE;
 		f7_msg->count++;
+	}
 
 	/* Set number of bytes to be transferred */
 	cr2 &= ~(STM32F7_I2C_CR2_NBYTES_MASK);

[PATCH 5.15 047/128] i2c: aspeed: Fix i2c bus hang in slave read

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jian Zhang <zhangjian.3032@bytedance.com>

commit 54f1840ddee9bbdc8dd89fbbfdfa632401244146 upstream.

When the `CONFIG_I2C_SLAVE` option is enabled and the device operates
as a slave, a situation arises where the master sends a START signal
without the accompanying STOP signal. This action results in a
persistent I2C bus timeout. The core issue stems from the fact that
the i2c controller remains in a slave read state without a timeout
mechanism. As a consequence, the bus perpetually experiences timeouts.

In this case, the i2c bus will be reset, but the slave_state reset is
missing.

Fixes: fee465150b45 ("i2c: aspeed: Reset the i2c controller when timeout occurs")
Signed-off-by: Jian Zhang <zhangjian.3032@bytedance.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/busses/i2c-aspeed.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -744,6 +744,8 @@ static void __aspeed_i2c_reg_slave(struc
 	func_ctrl_reg_val = readl(bus->base + ASPEED_I2C_FUN_CTRL_REG);
 	func_ctrl_reg_val |= ASPEED_I2CD_SLAVE_EN;
 	writel(func_ctrl_reg_val, bus->base + ASPEED_I2C_FUN_CTRL_REG);
+
+	bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE;
 }
 
 static int aspeed_i2c_reg_slave(struct i2c_client *client)
@@ -760,7 +762,6 @@ static int aspeed_i2c_reg_slave(struct i
 	__aspeed_i2c_reg_slave(bus, client->addr);
 
 	bus->slave = client;
-	bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE;
 	spin_unlock_irqrestore(&bus->lock, flags);
 
 	return 0;

[PATCH 5.15 048/128] tracing/kprobes: Fix the description of variable length arguments

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yujie Liu <yujie.liu@intel.com>

commit e0f831836cead677fb07d54bd6bf499df35640c2 upstream.

Fix the following kernel-doc warnings:

kernel/trace/trace_kprobe.c:1029: warning: Excess function parameter 'args' description in '__kprobe_event_gen_cmd_start'
kernel/trace/trace_kprobe.c:1097: warning: Excess function parameter 'args' description in '__kprobe_event_add_fields'

Refer to the usage of variable length arguments elsewhere in the kernel
code, "@..." is the proper way to express it in the description.

Link: https://lore.kernel.org/all/20231027041315.2613166-1-yujie.liu@intel.com/

Fixes: 2a588dd1d5d6 ("tracing: Add kprobe event command generation functions")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310190437.paI6LYJF-lkp@intel.com/
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/trace/trace_kprobe.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/kernel/trace/trace_kprobe.c
+++ b/kernel/trace/trace_kprobe.c
@@ -945,7 +945,7 @@ EXPORT_SYMBOL_GPL(kprobe_event_cmd_init)
  * @name: The name of the kprobe event
  * @loc: The location of the kprobe event
  * @kretprobe: Is this a return probe?
- * @args: Variable number of arg (pairs), one pair for each field
+ * @...: Variable number of arg (pairs), one pair for each field
  *
  * NOTE: Users normally won't want to call this function directly, but
  * rather use the kprobe_event_gen_cmd_start() wrapper, which automatically
@@ -1018,7 +1018,7 @@ EXPORT_SYMBOL_GPL(__kprobe_event_gen_cmd
 /**
  * __kprobe_event_add_fields - Add probe fields to a kprobe command from arg list
  * @cmd: A pointer to the dynevent_cmd struct representing the new event
- * @args: Variable number of arg (pairs), one pair for each field
+ * @...: Variable number of arg (pairs), one pair for each field
  *
  * NOTE: Users normally won't want to call this function directly, but
  * rather use the kprobe_event_add_fields() wrapper, which

[PATCH 5.15 049/128] misc: fastrpc: Clean buffers on remote invocation failures

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ekansh Gupta <quic_ekangupt@quicinc.com>

commit 1c8093591d1e372d700fe65423e7315a8ecf721b upstream.

With current design, buffers and dma handles are not freed in case
of remote invocation failures returned from DSP. This could result
in buffer leakings and dma handle pointing to wrong memory in the
fastrpc kernel. Adding changes to clean buffers and dma handles
even when remote invocation to DSP returns failures.

Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231013122007.174464-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/misc/fastrpc.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/misc/fastrpc.c
+++ b/drivers/misc/fastrpc.c
@@ -995,11 +995,6 @@ static int fastrpc_internal_invoke(struc
 	if (err)
 		goto bail;
 
-	/* Check the response from remote dsp */
-	err = ctx->retval;
-	if (err)
-		goto bail;
-
 	if (ctx->nscalars) {
 		/* make sure that all memory writes by DSP are seen by CPU */
 		dma_rmb();
@@ -1009,6 +1004,11 @@ static int fastrpc_internal_invoke(struc
 			goto bail;
 	}
 
+	/* Check the response from remote dsp */
+	err = ctx->retval;
+	if (err)
+		goto bail;
+
 bail:
 	if (err != -ERESTARTSYS && err != -ETIMEDOUT) {
 		/* We are done with this compute context */

[PATCH 5.15 050/128] nvmem: imx: correct nregs for i.MX6ULL

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peng Fan <peng.fan@nxp.com>

commit 2382c1b044231fd49eaf9aa82bc7113fc55487b8 upstream.

The nregs for i.MX6ULL should be 80 per fuse map, correct it.

Fixes: ffbc34bf0e9c ("nvmem: imx-ocotp: Implement i.MX6ULL/ULZ support")
Cc: Stable@vger.kernel.org
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231013124904.175782-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/nvmem/imx-ocotp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/nvmem/imx-ocotp.c
+++ b/drivers/nvmem/imx-ocotp.c
@@ -506,7 +506,7 @@ static const struct ocotp_params imx6ul_
 };
 
 static const struct ocotp_params imx6ull_params = {
-	.nregs = 64,
+	.nregs = 80,
 	.bank_address_words = 0,
 	.set_timing = imx_ocotp_set_imx6_timing,
 	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,

[PATCH 5.15 051/128] nvmem: imx: correct nregs for i.MX6SLL

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peng Fan <peng.fan@nxp.com>

commit 414a98abbefd82d591f4e2d1efd2917bcd3b6f6d upstream.

The nregs for i.MX6SLL should be 80 per fuse map, correct it.

Fixes: 6da27821a6f5 ("nvmem: imx-ocotp: add support for imx6sll")
Cc: Stable@vger.kernel.org
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231013124904.175782-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/nvmem/imx-ocotp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/nvmem/imx-ocotp.c
+++ b/drivers/nvmem/imx-ocotp.c
@@ -485,7 +485,7 @@ static const struct ocotp_params imx6sl_
 };
 
 static const struct ocotp_params imx6sll_params = {
-	.nregs = 128,
+	.nregs = 80,
 	.bank_address_words = 0,
 	.set_timing = imx_ocotp_set_imx6_timing,
 	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,

[PATCH 5.15 052/128] nvmem: imx: correct nregs for i.MX6UL

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peng Fan <peng.fan@nxp.com>

commit 7d6e10f5d254681983b53d979422c8de3fadbefb upstream.

The nregs for i.MX6UL should be 144 per fuse map, correct it.

Fixes: 4aa2b4802046 ("nvmem: octop: Add support for imx6ul")
Cc: Stable@vger.kernel.org
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231013124904.175782-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/nvmem/imx-ocotp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/nvmem/imx-ocotp.c
+++ b/drivers/nvmem/imx-ocotp.c
@@ -499,7 +499,7 @@ static const struct ocotp_params imx6sx_
 };
 
 static const struct ocotp_params imx6ul_params = {
-	.nregs = 128,
+	.nregs = 144,
 	.bank_address_words = 0,
 	.set_timing = imx_ocotp_set_imx6_timing,
 	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,

[PATCH 5.15 053/128] perf/core: Fix potential NULL deref

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Zijlstra <peterz@infradead.org>

commit a71ef31485bb51b846e8db8b3a35e432cc15afb5 upstream.

Smatch is awesome.

Fixes: 32671e3799ca ("perf: Disallow mis-matched inherited group reads")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/events/core.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -13277,7 +13277,8 @@ static int inherit_group(struct perf_eve
 		    !perf_get_aux_event(child_ctr, leader))
 			return -EINVAL;
 	}
-	leader->group_generation = parent_event->group_generation;
+	if (leader)
+		leader->group_generation = parent_event->group_generation;
 	return 0;
 }
 

[PATCH 5.15 054/128] sparc32: fix a braino in fault handling in csum_and_copy_..._user()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Al Viro <viro@zeniv.linux.org.uk>

commit 1f36cd05e0081f2c75769a551d584c4ffb2a5660 upstream.

Fault handler used to make non-trivial calls, so it needed
to set a stack frame up.  Used to be
	save ... - grab a stack frame, old %o... become %i...
	....
	ret	- go back to address originally in %o7, currently %i7
	 restore - switch to previous stack frame, in delay slot
Non-trivial calls had been gone since ab5e8b331244 and that code should
have become
	retl	- go back to address in %o7
	 clr %o0 - have return value set to 0
What it had become instead was
	ret	- go back to address in %i7 - return address of *caller*
	 clr %o0 - have return value set to 0
which is not good, to put it mildly - we forcibly return 0 from
csum_and_copy_{from,to}_iter() (which is what the call of that
thing had been inlined into) and do that without dropping the
stack frame of said csum_and_copy_..._iter().  Confuses the
hell out of the caller of csum_and_copy_..._iter(), obviously...

Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: ab5e8b331244 "sparc32: propagate the calling conventions change down to __csum_partial_copy_sparc_generic()"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/sparc/lib/checksum_32.S |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/sparc/lib/checksum_32.S
+++ b/arch/sparc/lib/checksum_32.S
@@ -453,5 +453,5 @@ ccslow:	cmp	%g1, 0
  * we only bother with faults on loads... */
 
 cc_fault:
-	ret
+	retl
 	 clr	%o0

[PATCH 5.15 055/128] clk: Sanitize possible_parent_show to Handle Return Value of of_clk_get_parent_name

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alessandro Carminati <alessandro.carminati@gmail.com>

commit ceb87a361d0b079ecbc7d2831618c19087f304a9 upstream.

In the possible_parent_show function, ensure proper handling of the return
value from of_clk_get_parent_name to prevent potential issues arising from
a NULL return.
The current implementation invokes seq_puts directly on the result of
of_clk_get_parent_name without verifying the return value, which can lead
to kernel panic if the function returns NULL.

This patch addresses the concern by introducing a check on the return
value of of_clk_get_parent_name. If the return value is not NULL, the
function proceeds to call seq_puts, providing the returned value as
argument.
However, if of_clk_get_parent_name returns NULL, the function provides a
static string as argument, avoiding the panic.

Fixes: 1ccc0ddf046a ("clk: Use seq_puts() in possible_parent_show()")
Reported-by: Philip Daly <pdaly@redhat.com>
Signed-off-by: Alessandro Carminati (Red Hat) <alessandro.carminati@gmail.com>
Link: https://lore.kernel.org/r/20230921073217.572151-1-alessandro.carminati@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/clk/clk.c |   21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)

--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -3182,6 +3182,7 @@ static void possible_parent_show(struct
 				 unsigned int i, char terminator)
 {
 	struct clk_core *parent;
+	const char *name = NULL;
 
 	/*
 	 * Go through the following options to fetch a parent's name.
@@ -3196,18 +3197,20 @@ static void possible_parent_show(struct
 	 * registered (yet).
 	 */
 	parent = clk_core_get_parent_by_index(core, i);
-	if (parent)
+	if (parent) {
 		seq_puts(s, parent->name);
-	else if (core->parents[i].name)
+	} else if (core->parents[i].name) {
 		seq_puts(s, core->parents[i].name);
-	else if (core->parents[i].fw_name)
+	} else if (core->parents[i].fw_name) {
 		seq_printf(s, "<%s>(fw)", core->parents[i].fw_name);
-	else if (core->parents[i].index >= 0)
-		seq_puts(s,
-			 of_clk_get_parent_name(core->of_node,
-						core->parents[i].index));
-	else
-		seq_puts(s, "(missing)");
+	} else {
+		if (core->parents[i].index >= 0)
+			name = of_clk_get_parent_name(core->of_node, core->parents[i].index);
+		if (!name)
+			name = "(missing)";
+
+		seq_puts(s, name);
+	}
 
 	seq_putc(s, terminator);
 }

[PATCH 5.15 056/128] iio: afe: rescale: reorder includes

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Liam Beguin <liambeguin@gmail.com>

[ Upstream commit cd717ac6f69db4953ca701c6220c7cb58e17f35a ]

Includes should be ordered alphabetically which is already the case,
but follow what is done in other drivers by separation IIO specific
headers with a blank line.

Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220108205319.2046348-6-liambeguin@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: bee448390e51 ("iio: afe: rescale: Accept only offset channels")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/afe/iio-rescale.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/afe/iio-rescale.c b/drivers/iio/afe/iio-rescale.c
index cc28713b0dc8b..b0934f85a4a04 100644
--- a/drivers/iio/afe/iio-rescale.c
+++ b/drivers/iio/afe/iio-rescale.c
@@ -9,14 +9,15 @@
 
 #include <linux/err.h>
 #include <linux/gcd.h>
-#include <linux/iio/consumer.h>
-#include <linux/iio/iio.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
 
+#include <linux/iio/consumer.h>
+#include <linux/iio/iio.h>
+
 struct rescale;
 
 struct rescale_cfg {
-- 
2.42.0

[PATCH 5.15 057/128] iio: afe: rescale: expose scale processing function

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Liam Beguin <liambeguin@gmail.com>

[ Upstream commit bc437f7515f5e14aec9f2801412d9ea48116a97d ]

In preparation for the addition of kunit tests, expose the logic
responsible for combining channel scales.

Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220213025739.2561834-2-liambeguin@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: bee448390e51 ("iio: afe: rescale: Accept only offset channels")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/afe/iio-rescale.c   | 65 ++++++++++++++-------------------
 include/linux/iio/afe/rescale.h | 32 ++++++++++++++++
 2 files changed, 60 insertions(+), 37 deletions(-)
 create mode 100644 include/linux/iio/afe/rescale.h

diff --git a/drivers/iio/afe/iio-rescale.c b/drivers/iio/afe/iio-rescale.c
index b0934f85a4a04..6cc453ab9c685 100644
--- a/drivers/iio/afe/iio-rescale.c
+++ b/drivers/iio/afe/iio-rescale.c
@@ -15,32 +15,43 @@
 #include <linux/platform_device.h>
 #include <linux/property.h>
 
+#include <linux/iio/afe/rescale.h>
 #include <linux/iio/consumer.h>
 #include <linux/iio/iio.h>
 
-struct rescale;
-
-struct rescale_cfg {
-	enum iio_chan_type type;
-	int (*props)(struct device *dev, struct rescale *rescale);
-};
+int rescale_process_scale(struct rescale *rescale, int scale_type,
+			  int *val, int *val2)
+{
+	s64 tmp;
 
-struct rescale {
-	const struct rescale_cfg *cfg;
-	struct iio_channel *source;
-	struct iio_chan_spec chan;
-	struct iio_chan_spec_ext_info *ext_info;
-	bool chan_processed;
-	s32 numerator;
-	s32 denominator;
-};
+	switch (scale_type) {
+	case IIO_VAL_FRACTIONAL:
+		*val *= rescale->numerator;
+		*val2 *= rescale->denominator;
+		return scale_type;
+	case IIO_VAL_INT:
+		*val *= rescale->numerator;
+		if (rescale->denominator == 1)
+			return scale_type;
+		*val2 = rescale->denominator;
+		return IIO_VAL_FRACTIONAL;
+	case IIO_VAL_FRACTIONAL_LOG2:
+		tmp = (s64)*val * 1000000000LL;
+		tmp = div_s64(tmp, rescale->denominator);
+		tmp *= rescale->numerator;
+		tmp = div_s64(tmp, 1000000000LL);
+		*val = tmp;
+		return scale_type;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
 
 static int rescale_read_raw(struct iio_dev *indio_dev,
 			    struct iio_chan_spec const *chan,
 			    int *val, int *val2, long mask)
 {
 	struct rescale *rescale = iio_priv(indio_dev);
-	s64 tmp;
 	int ret;
 
 	switch (mask) {
@@ -66,27 +77,7 @@ static int rescale_read_raw(struct iio_dev *indio_dev,
 		} else {
 			ret = iio_read_channel_scale(rescale->source, val, val2);
 		}
-		switch (ret) {
-		case IIO_VAL_FRACTIONAL:
-			*val *= rescale->numerator;
-			*val2 *= rescale->denominator;
-			return ret;
-		case IIO_VAL_INT:
-			*val *= rescale->numerator;
-			if (rescale->denominator == 1)
-				return ret;
-			*val2 = rescale->denominator;
-			return IIO_VAL_FRACTIONAL;
-		case IIO_VAL_FRACTIONAL_LOG2:
-			tmp = (s64)*val * 1000000000LL;
-			tmp = div_s64(tmp, rescale->denominator);
-			tmp *= rescale->numerator;
-			tmp = div_s64(tmp, 1000000000LL);
-			*val = tmp;
-			return ret;
-		default:
-			return -EOPNOTSUPP;
-		}
+		return rescale_process_scale(rescale, ret, val, val2);
 	default:
 		return -EINVAL;
 	}
diff --git a/include/linux/iio/afe/rescale.h b/include/linux/iio/afe/rescale.h
new file mode 100644
index 0000000000000..8a2eb34af3271
--- /dev/null
+++ b/include/linux/iio/afe/rescale.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2018 Axentia Technologies AB
+ */
+
+#ifndef __IIO_RESCALE_H__
+#define __IIO_RESCALE_H__
+
+#include <linux/types.h>
+#include <linux/iio/iio.h>
+
+struct device;
+struct rescale;
+
+struct rescale_cfg {
+	enum iio_chan_type type;
+	int (*props)(struct device *dev, struct rescale *rescale);
+};
+
+struct rescale {
+	const struct rescale_cfg *cfg;
+	struct iio_channel *source;
+	struct iio_chan_spec chan;
+	struct iio_chan_spec_ext_info *ext_info;
+	bool chan_processed;
+	s32 numerator;
+	s32 denominator;
+};
+
+int rescale_process_scale(struct rescale *rescale, int scale_type,
+			  int *val, int *val2);
+#endif /* __IIO_RESCALE_H__ */
-- 
2.42.0

[PATCH 5.15 058/128] iio: afe: rescale: add offset support

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Liam Beguin <liambeguin@gmail.com>

[ Upstream commit a29c3283653b80b916c5ca5292c5d36415e38e92 ]

This is a preparatory change required for the addition of temperature
sensing front ends.

Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220213025739.2561834-4-liambeguin@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: bee448390e51 ("iio: afe: rescale: Accept only offset channels")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/afe/iio-rescale.c   | 81 +++++++++++++++++++++++++++++++++
 include/linux/iio/afe/rescale.h |  4 ++
 2 files changed, 85 insertions(+)

diff --git a/drivers/iio/afe/iio-rescale.c b/drivers/iio/afe/iio-rescale.c
index 6cc453ab9c685..84f21dc94a2f7 100644
--- a/drivers/iio/afe/iio-rescale.c
+++ b/drivers/iio/afe/iio-rescale.c
@@ -3,6 +3,7 @@
  * IIO rescale driver
  *
  * Copyright (C) 2018 Axentia Technologies AB
+ * Copyright (C) 2022 Liam Beguin <liambeguin@gmail.com>
  *
  * Author: Peter Rosin <peda@axentia.se>
  */
@@ -47,11 +48,46 @@ int rescale_process_scale(struct rescale *rescale, int scale_type,
 	}
 }
 
+int rescale_process_offset(struct rescale *rescale, int scale_type,
+			   int scale, int scale2, int schan_off,
+			   int *val, int *val2)
+{
+	s64 tmp, tmp2;
+
+	switch (scale_type) {
+	case IIO_VAL_FRACTIONAL:
+		tmp = (s64)rescale->offset * scale2;
+		*val = div_s64(tmp, scale) + schan_off;
+		return IIO_VAL_INT;
+	case IIO_VAL_INT:
+		*val = div_s64(rescale->offset, scale) + schan_off;
+		return IIO_VAL_INT;
+	case IIO_VAL_FRACTIONAL_LOG2:
+		tmp = (s64)rescale->offset * (1 << scale2);
+		*val = div_s64(tmp, scale) + schan_off;
+		return IIO_VAL_INT;
+	case IIO_VAL_INT_PLUS_NANO:
+		tmp = (s64)rescale->offset * 1000000000LL;
+		tmp2 = ((s64)scale * 1000000000LL) + scale2;
+		*val = div64_s64(tmp, tmp2) + schan_off;
+		return IIO_VAL_INT;
+	case IIO_VAL_INT_PLUS_MICRO:
+		tmp = (s64)rescale->offset * 1000000LL;
+		tmp2 = ((s64)scale * 1000000LL) + scale2;
+		*val = div64_s64(tmp, tmp2) + schan_off;
+		return IIO_VAL_INT;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
 static int rescale_read_raw(struct iio_dev *indio_dev,
 			    struct iio_chan_spec const *chan,
 			    int *val, int *val2, long mask)
 {
 	struct rescale *rescale = iio_priv(indio_dev);
+	int scale, scale2;
+	int schan_off = 0;
 	int ret;
 
 	switch (mask) {
@@ -78,6 +114,47 @@ static int rescale_read_raw(struct iio_dev *indio_dev,
 			ret = iio_read_channel_scale(rescale->source, val, val2);
 		}
 		return rescale_process_scale(rescale, ret, val, val2);
+	case IIO_CHAN_INFO_OFFSET:
+		/*
+		 * Processed channels are scaled 1-to-1 and source offset is
+		 * already taken into account.
+		 *
+		 * In other cases, real world measurement are expressed as:
+		 *
+		 *	schan_scale * (raw + schan_offset)
+		 *
+		 * Given that the rescaler parameters are applied recursively:
+		 *
+		 *	rescaler_scale * (schan_scale * (raw + schan_offset) +
+		 *		rescaler_offset)
+		 *
+		 * Or,
+		 *
+		 *	(rescaler_scale * schan_scale) * (raw +
+		 *		(schan_offset +	rescaler_offset / schan_scale)
+		 *
+		 * Thus, reusing the original expression the parameters exposed
+		 * to userspace are:
+		 *
+		 *	scale = schan_scale * rescaler_scale
+		 *	offset = schan_offset + rescaler_offset / schan_scale
+		 */
+		if (rescale->chan_processed) {
+			*val = rescale->offset;
+			return IIO_VAL_INT;
+		}
+
+		if (iio_channel_has_info(rescale->source->channel,
+					 IIO_CHAN_INFO_OFFSET)) {
+			ret = iio_read_channel_offset(rescale->source,
+						      &schan_off, NULL);
+			if (ret != IIO_VAL_INT)
+				return ret < 0 ? ret : -EOPNOTSUPP;
+		}
+
+		ret = iio_read_channel_scale(rescale->source, &scale, &scale2);
+		return rescale_process_offset(rescale, ret, scale, scale2,
+					      schan_off, val, val2);
 	default:
 		return -EINVAL;
 	}
@@ -154,6 +231,9 @@ static int rescale_configure_channel(struct device *dev,
 	chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 		BIT(IIO_CHAN_INFO_SCALE);
 
+	if (rescale->offset)
+		chan->info_mask_separate |= BIT(IIO_CHAN_INFO_OFFSET);
+
 	/*
 	 * Using .read_avail() is fringe to begin with and makes no sense
 	 * whatsoever for processed channels, so we make sure that this cannot
@@ -318,6 +398,7 @@ static int rescale_probe(struct platform_device *pdev)
 	rescale->cfg = of_device_get_match_data(dev);
 	rescale->numerator = 1;
 	rescale->denominator = 1;
+	rescale->offset = 0;
 
 	ret = rescale->cfg->props(dev, rescale);
 	if (ret)
diff --git a/include/linux/iio/afe/rescale.h b/include/linux/iio/afe/rescale.h
index 8a2eb34af3271..6eecb435488f1 100644
--- a/include/linux/iio/afe/rescale.h
+++ b/include/linux/iio/afe/rescale.h
@@ -25,8 +25,12 @@ struct rescale {
 	bool chan_processed;
 	s32 numerator;
 	s32 denominator;
+	s32 offset;
 };
 
 int rescale_process_scale(struct rescale *rescale, int scale_type,
 			  int *val, int *val2);
+int rescale_process_offset(struct rescale *rescale, int scale_type,
+			   int scale, int scale2, int schan_off,
+			   int *val, int *val2);
 #endif /* __IIO_RESCALE_H__ */
-- 
2.42.0

[PATCH 5.15 059/128] iio: afe: rescale: Accept only offset channels

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit bee448390e5166d019e9e037194d487ee94399d9 ]

As noted by Jonathan Cameron: it is perfectly legal for a channel
to have an offset but no scale in addition to the raw interface.
The conversion will imply that scale is 1:1.

Make rescale_configure_channel() accept just scale, or just offset
to process a channel.

When a user asks for IIO_CHAN_INFO_OFFSET in rescale_read_raw()
we now have to deal with the fact that OFFSET could be present
but SCALE missing. Add code to simply scale 1:1 in this case.

Link: https://lore.kernel.org/linux-iio/CACRpkdZXBjHU4t-GVOCFxRO-AHGxKnxMeHD2s4Y4PuC29gBq6g@mail.gmail.com/
Fixes: 53ebee949980 ("iio: afe: iio-rescale: Support processed channels")
Fixes: 9decacd8b3a4 ("iio: afe: rescale: Fix boolean logic bug")
Reported-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20230902-iio-rescale-only-offset-v2-1-988b807754c8@linaro.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/afe/iio-rescale.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/afe/iio-rescale.c b/drivers/iio/afe/iio-rescale.c
index 84f21dc94a2f7..ea0a39882eb25 100644
--- a/drivers/iio/afe/iio-rescale.c
+++ b/drivers/iio/afe/iio-rescale.c
@@ -152,8 +152,18 @@ static int rescale_read_raw(struct iio_dev *indio_dev,
 				return ret < 0 ? ret : -EOPNOTSUPP;
 		}
 
-		ret = iio_read_channel_scale(rescale->source, &scale, &scale2);
-		return rescale_process_offset(rescale, ret, scale, scale2,
+		if (iio_channel_has_info(rescale->source->channel,
+					 IIO_CHAN_INFO_SCALE)) {
+			ret = iio_read_channel_scale(rescale->source, &scale, &scale2);
+			return rescale_process_offset(rescale, ret, scale, scale2,
+						      schan_off, val, val2);
+		}
+
+		/*
+		 * If we get here we have no scale so scale 1:1 but apply
+		 * rescaler and offset, if any.
+		 */
+		return rescale_process_offset(rescale, IIO_VAL_FRACTIONAL, 1, 1,
 					      schan_off, val, val2);
 	default:
 		return -EINVAL;
@@ -218,8 +228,9 @@ static int rescale_configure_channel(struct device *dev,
 	chan->type = rescale->cfg->type;
 
 	if (iio_channel_has_info(schan, IIO_CHAN_INFO_RAW) &&
-	    iio_channel_has_info(schan, IIO_CHAN_INFO_SCALE)) {
-		dev_info(dev, "using raw+scale source channel\n");
+	    (iio_channel_has_info(schan, IIO_CHAN_INFO_SCALE) ||
+	     iio_channel_has_info(schan, IIO_CHAN_INFO_OFFSET))) {
+		dev_info(dev, "using raw+scale/offset source channel\n");
 	} else if (iio_channel_has_info(schan, IIO_CHAN_INFO_PROCESSED)) {
 		dev_info(dev, "using processed channel\n");
 		rescale->chan_processed = true;
-- 
2.42.0

[PATCH 5.15 060/128] gve: Fix GFP flags when allocing pages

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shailend Chand <shailend@google.com>

[ Upstream commit a92f7a6feeb3884c69c1c7c1f13bccecb2228ad0 ]

Use GFP_ATOMIC when allocating pages out of the hotpath,
continue to use GFP_KERNEL when allocating pages during setup.

GFP_KERNEL will allow blocking which allows it to succeed
more often in a low memory enviornment but in the hotpath we do
not want to allow the allocation to block.

Fixes: f5cedc84a30d2 ("gve: Add transmit and receive support")
Signed-off-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David Awogbemila <awogbemila@google.com>
Link: https://lore.kernel.org/r/20220126003843.3584521-1-awogbemila@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/google/gve/gve_rx_dqo.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/google/gve/gve_rx_dqo.c b/drivers/net/ethernet/google/gve/gve_rx_dqo.c
index 7b18b4fd9e548..d947c2c334128 100644
--- a/drivers/net/ethernet/google/gve/gve_rx_dqo.c
+++ b/drivers/net/ethernet/google/gve/gve_rx_dqo.c
@@ -157,7 +157,7 @@ static int gve_alloc_page_dqo(struct gve_priv *priv,
 	int err;
 
 	err = gve_alloc_page(priv, &priv->pdev->dev, &buf_state->page_info.page,
-			     &buf_state->addr, DMA_FROM_DEVICE, GFP_KERNEL);
+			     &buf_state->addr, DMA_FROM_DEVICE, GFP_ATOMIC);
 	if (err)
 		return err;
 
-- 
2.42.0

[PATCH 5.15 061/128] x86/i8259: Skip probing when ACPI/MADT advertises PCAT compatibility

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <tglx@linutronix.de>

commit 128b0c9781c9f2651bea163cb85e52a6c7be0f9e upstream.

David and a few others reported that on certain newer systems some legacy
interrupts fail to work correctly.

Debugging revealed that the BIOS of these systems leaves the legacy PIC in
uninitialized state which makes the PIC detection fail and the kernel
switches to a dummy implementation.

Unfortunately this fallback causes quite some code to fail as it depends on
checks for the number of legacy PIC interrupts or the availability of the
real PIC.

In theory there is no reason to use the PIC on any modern system when
IO/APIC is available, but the dependencies on the related checks cannot be
resolved trivially and on short notice. This needs lots of analysis and
rework.

The PIC detection has been added to avoid quirky checks and force selection
of the dummy implementation all over the place, especially in VM guest
scenarios. So it's not an option to revert the relevant commit as that
would break a lot of other scenarios.

One solution would be to try to initialize the PIC on detection fail and
retry the detection, but that puts the burden on everything which does not
have a PIC.

Fortunately the ACPI/MADT table header has a flag field, which advertises
in bit 0 that the system is PCAT compatible, which means it has a legacy
8259 PIC.

Evaluate that bit and if set avoid the detection routine and keep the real
PIC installed, which then gets initialized (for nothing) and makes the rest
of the code with all the dependencies work again.

Fixes: e179f6914152 ("x86, irq, pic: Probe for legacy PIC and set legacy_pic appropriately")
Reported-by: David Lazar <dlazar@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: David Lazar <dlazar@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218003
Link: https://lore.kernel.org/r/875y2u5s8g.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/include/asm/i8259.h |    2 ++
 arch/x86/kernel/acpi/boot.c  |    3 +++
 arch/x86/kernel/i8259.c      |   38 ++++++++++++++++++++++++++++++--------
 3 files changed, 35 insertions(+), 8 deletions(-)

--- a/arch/x86/include/asm/i8259.h
+++ b/arch/x86/include/asm/i8259.h
@@ -69,6 +69,8 @@ struct legacy_pic {
 	void (*make_irq)(unsigned int irq);
 };
 
+void legacy_pic_pcat_compat(void);
+
 extern struct legacy_pic *legacy_pic;
 extern struct legacy_pic null_legacy_pic;
 
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -139,6 +139,9 @@ static int __init acpi_parse_madt(struct
 		pr_debug("Local APIC address 0x%08x\n", madt->address);
 	}
 
+	if (madt->flags & ACPI_MADT_PCAT_COMPAT)
+		legacy_pic_pcat_compat();
+
 	default_acpi_madt_oem_check(madt->header.oem_id,
 				    madt->header.oem_table_id);
 
--- a/arch/x86/kernel/i8259.c
+++ b/arch/x86/kernel/i8259.c
@@ -32,6 +32,7 @@
  */
 static void init_8259A(int auto_eoi);
 
+static bool pcat_compat __ro_after_init;
 static int i8259A_auto_eoi;
 DEFINE_RAW_SPINLOCK(i8259A_lock);
 
@@ -301,15 +302,32 @@ static void unmask_8259A(void)
 
 static int probe_8259A(void)
 {
+	unsigned char new_val, probe_val = ~(1 << PIC_CASCADE_IR);
 	unsigned long flags;
-	unsigned char probe_val = ~(1 << PIC_CASCADE_IR);
-	unsigned char new_val;
+
+	/*
+	 * If MADT has the PCAT_COMPAT flag set, then do not bother probing
+	 * for the PIC. Some BIOSes leave the PIC uninitialized and probing
+	 * fails.
+	 *
+	 * Right now this causes problems as quite some code depends on
+	 * nr_legacy_irqs() > 0 or has_legacy_pic() == true. This is silly
+	 * when the system has an IO/APIC because then PIC is not required
+	 * at all, except for really old machines where the timer interrupt
+	 * must be routed through the PIC. So just pretend that the PIC is
+	 * there and let legacy_pic->init() initialize it for nothing.
+	 *
+	 * Alternatively this could just try to initialize the PIC and
+	 * repeat the probe, but for cases where there is no PIC that's
+	 * just pointless.
+	 */
+	if (pcat_compat)
+		return nr_legacy_irqs();
+
 	/*
-	 * Check to see if we have a PIC.
-	 * Mask all except the cascade and read
-	 * back the value we just wrote. If we don't
-	 * have a PIC, we will read 0xff as opposed to the
-	 * value we wrote.
+	 * Check to see if we have a PIC.  Mask all except the cascade and
+	 * read back the value we just wrote. If we don't have a PIC, we
+	 * will read 0xff as opposed to the value we wrote.
 	 */
 	raw_spin_lock_irqsave(&i8259A_lock, flags);
 
@@ -431,5 +449,9 @@ static int __init i8259A_init_ops(void)
 
 	return 0;
 }
-
 device_initcall(i8259A_init_ops);
+
+void __init legacy_pic_pcat_compat(void)
+{
+	pcat_compat = true;
+}

[PATCH 5.15 062/128] x86/mm: Simplify RESERVE_BRK()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Josh Poimboeuf <jpoimboe@redhat.com>

commit a1e2c031ec3949b8c039b739c0b5bf9c30007b00 upstream.

RESERVE_BRK() reserves data in the .brk_reservation section.  The data
is initialized to zero, like BSS, so the macro specifies 'nobits' to
prevent the data from taking up space in the vmlinux binary.  The only
way to get the compiler to do that (without putting the variable in .bss
proper) is to use inline asm.

The macro also has a hack which encloses the inline asm in a discarded
function, which allows the size to be passed (global inline asm doesn't
allow inputs).

Remove the need for the discarded function hack by just stringifying the
size rather than supplying it as an input to the inline asm.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220506121631.133110232@infradead.org
[nathan: Resolve conflict due to lack of 2b6ff7dea670]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/include/asm/setup.h |   30 +++++++++++-------------------
 1 file changed, 11 insertions(+), 19 deletions(-)

--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -108,27 +108,19 @@ extern unsigned long _brk_end;
 void *extend_brk(size_t size, size_t align);
 
 /*
- * Reserve space in the brk section.  The name must be unique within
- * the file, and somewhat descriptive.  The size is in bytes.  Must be
- * used at file scope.
+ * Reserve space in the brk section.  The name must be unique within the file,
+ * and somewhat descriptive.  The size is in bytes.
  *
- * (This uses a temp function to wrap the asm so we can pass it the
- * size parameter; otherwise we wouldn't be able to.  We can't use a
- * "section" attribute on a normal variable because it always ends up
- * being @progbits, which ends up allocating space in the vmlinux
- * executable.)
+ * The allocation is done using inline asm (rather than using a section
+ * attribute on a normal variable) in order to allow the use of @nobits, so
+ * that it doesn't take up any space in the vmlinux file.
  */
-#define RESERVE_BRK(name,sz)						\
-	static void __section(".discard.text") __used notrace		\
-	__brk_reservation_fn_##name##__(void) {				\
-		asm volatile (						\
-			".pushsection .brk_reservation,\"aw\",@nobits;" \
-			".brk." #name ":"				\
-			" 1:.skip %c0;"					\
-			" .size .brk." #name ", . - 1b;"		\
-			" .popsection"					\
-			: : "i" (sz));					\
-	}
+#define RESERVE_BRK(name, size)						\
+	asm(".pushsection .brk_reservation,\"aw\",@nobits\n\t"		\
+	    ".brk." #name ":\n\t"					\
+	    ".skip " __stringify(size) "\n\t"				\
+	    ".size .brk." #name ", " __stringify(size) "\n\t"		\
+	    ".popsection\n\t")
 
 extern void probe_roms(void);
 #ifdef __i386__

[PATCH 5.15 063/128] x86/mm: Fix RESERVE_BRK() for older binutils

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Josh Poimboeuf <jpoimboe@kernel.org>

commit e32683c6f7d22ba624e0bfc58b02cf3348bdca63 upstream.

With binutils 2.26, RESERVE_BRK() causes a build failure:

  /tmp/ccnGOKZ5.s: Assembler messages:
  /tmp/ccnGOKZ5.s:98: Error: missing ')'
  /tmp/ccnGOKZ5.s:98: Error: missing ')'
  /tmp/ccnGOKZ5.s:98: Error: missing ')'
  /tmp/ccnGOKZ5.s:98: Error: junk at end of line, first unrecognized
  character is `U'

The problem is this line:

  RESERVE_BRK(early_pgt_alloc, INIT_PGT_BUF_SIZE)

Specifically, the INIT_PGT_BUF_SIZE macro which (via PAGE_SIZE's use
_AC()) has a "1UL", which makes older versions of the assembler unhappy.
Unfortunately the _AC() macro doesn't work for inline asm.

Inline asm was only needed here to convince the toolchain to add the
STT_NOBITS flag.  However, if a C variable is placed in a section whose
name is prefixed with ".bss", GCC and Clang automatically set
STT_NOBITS.  In fact, ".bss..page_aligned" already relies on this trick.

So fix the build failure (and simplify the macro) by allocating the
variable in C.

Also, add NOLOAD to the ".brk" output section clause in the linker
script.  This is a failsafe in case the ".bss" prefix magic trick ever
stops working somehow.  If there's a section type mismatch, the GNU
linker will force the ".brk" output section to be STT_NOBITS.  The LLVM
linker will fail with a "section type mismatch" error.

Note this also changes the name of the variable from .brk.##name to
__brk_##name.  The variable names aren't actually used anywhere, so it's
harmless.

Fixes: a1e2c031ec39 ("x86/mm: Simplify RESERVE_BRK()")
Reported-by: Joe Damato <jdamato@fastly.com>
Reported-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Joe Damato <jdamato@fastly.com>
Link: https://lore.kernel.org/r/22d07a44c80d8e8e1e82b9a806ddc8c6bbb2606e.1654759036.git.jpoimboe@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/include/asm/setup.h  |   38 +++++++++++++++++++++-----------------
 arch/x86/kernel/setup.c       |    5 -----
 arch/x86/kernel/vmlinux.lds.S |    4 ++--
 3 files changed, 23 insertions(+), 24 deletions(-)

--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -108,19 +108,16 @@ extern unsigned long _brk_end;
 void *extend_brk(size_t size, size_t align);
 
 /*
- * Reserve space in the brk section.  The name must be unique within the file,
- * and somewhat descriptive.  The size is in bytes.
+ * Reserve space in the .brk section, which is a block of memory from which the
+ * caller is allowed to allocate very early (before even memblock is available)
+ * by calling extend_brk().  All allocated memory will be eventually converted
+ * to memblock.  Any leftover unallocated memory will be freed.
  *
- * The allocation is done using inline asm (rather than using a section
- * attribute on a normal variable) in order to allow the use of @nobits, so
- * that it doesn't take up any space in the vmlinux file.
+ * The size is in bytes.
  */
-#define RESERVE_BRK(name, size)						\
-	asm(".pushsection .brk_reservation,\"aw\",@nobits\n\t"		\
-	    ".brk." #name ":\n\t"					\
-	    ".skip " __stringify(size) "\n\t"				\
-	    ".size .brk." #name ", " __stringify(size) "\n\t"		\
-	    ".popsection\n\t")
+#define RESERVE_BRK(name, size)					\
+	__section(".bss..brk") __aligned(1) __used	\
+	static char __brk_##name[size]
 
 extern void probe_roms(void);
 #ifdef __i386__
@@ -133,12 +130,19 @@ asmlinkage void __init x86_64_start_rese
 
 #endif /* __i386__ */
 #endif /* _SETUP */
-#else
-#define RESERVE_BRK(name,sz)				\
-	.pushsection .brk_reservation,"aw",@nobits;	\
-.brk.name:						\
-1:	.skip sz;					\
-	.size .brk.name,.-1b;				\
+
+#else  /* __ASSEMBLY */
+
+.macro __RESERVE_BRK name, size
+	.pushsection .bss..brk, "aw"
+SYM_DATA_START(__brk_\name)
+	.skip \size
+SYM_DATA_END(__brk_\name)
 	.popsection
+.endm
+
+#define RESERVE_BRK(name, size) __RESERVE_BRK name, size
+
 #endif /* __ASSEMBLY__ */
+
 #endif /* _ASM_X86_SETUP_H */
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -66,11 +66,6 @@ RESERVE_BRK(dmi_alloc, 65536);
 #endif
 
 
-/*
- * Range of the BSS area. The size of the BSS area is determined
- * at link time, with RESERVE_BRK() facility reserving additional
- * chunks.
- */
 unsigned long _brk_start = (unsigned long)__brk_base;
 unsigned long _brk_end   = (unsigned long)__brk_base;
 
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -411,10 +411,10 @@ SECTIONS
 	__end_of_kernel_reserve = .;
 
 	. = ALIGN(PAGE_SIZE);
-	.brk : AT(ADDR(.brk) - LOAD_OFFSET) {
+	.brk (NOLOAD) : AT(ADDR(.brk) - LOAD_OFFSET) {
 		__brk_base = .;
 		. += 64 * 1024;		/* 64k alignment slop space */
-		*(.brk_reservation)	/* areas brk users have reserved */
+		*(.bss..brk)		/* areas brk users have reserved */
 		__brk_limit = .;
 	}
 

[PATCH 5.15 064/128] ext4: add two helper functions extent_logical_end() and pa_logical_end()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Baokun Li <libaokun1@huawei.com>

commit 43bbddc067883d94de7a43d5756a295439fbe37d upstream.

When we use lstart + len to calculate the end of free extent or prealloc
space, it may exceed the maximum value of 4294967295(0xffffffff) supported
by ext4_lblk_t and cause overflow, which may lead to various problems.

Therefore, we add two helper functions, extent_logical_end() and
pa_logical_end(), to limit the type of end to loff_t, and also convert
lstart to loff_t for calculation to avoid overflow.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230724121059.11834-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/mballoc.c |    7 +++----
 fs/ext4/mballoc.h |   14 ++++++++++++++
 2 files changed, 17 insertions(+), 4 deletions(-)

--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -4079,7 +4079,7 @@ ext4_mb_normalize_request(struct ext4_al
 
 	/* first, let's learn actual file size
 	 * given current request is allocated */
-	size = ac->ac_o_ex.fe_logical + EXT4_C2B(sbi, ac->ac_o_ex.fe_len);
+	size = extent_logical_end(sbi, &ac->ac_o_ex);
 	size = size << bsbits;
 	if (size < i_size_read(ac->ac_inode))
 		size = i_size_read(ac->ac_inode);
@@ -4419,8 +4419,7 @@ ext4_mb_use_preallocated(struct ext4_all
 		/* all fields in this condition don't change,
 		 * so we can skip locking for them */
 		if (ac->ac_o_ex.fe_logical < pa->pa_lstart ||
-		    ac->ac_o_ex.fe_logical >= (pa->pa_lstart +
-					       EXT4_C2B(sbi, pa->pa_len)))
+		    ac->ac_o_ex.fe_logical >= pa_logical_end(sbi, pa))
 			continue;
 
 		/* non-extent files can't have physical blocks past 2^32 */
@@ -5241,7 +5240,7 @@ static void ext4_mb_group_or_file(struct
 
 	group_pa_eligible = sbi->s_mb_group_prealloc > 0;
 	inode_pa_eligible = true;
-	size = ac->ac_o_ex.fe_logical + EXT4_C2B(sbi, ac->ac_o_ex.fe_len);
+	size = extent_logical_end(sbi, &ac->ac_o_ex);
 	isize = (i_size_read(ac->ac_inode) + ac->ac_sb->s_blocksize - 1)
 		>> bsbits;
 
--- a/fs/ext4/mballoc.h
+++ b/fs/ext4/mballoc.h
@@ -219,6 +219,20 @@ static inline ext4_fsblk_t ext4_grp_offs
 		(fex->fe_start << EXT4_SB(sb)->s_cluster_bits);
 }
 
+static inline loff_t extent_logical_end(struct ext4_sb_info *sbi,
+					struct ext4_free_extent *fex)
+{
+	/* Use loff_t to avoid end exceeding ext4_lblk_t max. */
+	return (loff_t)fex->fe_logical + EXT4_C2B(sbi, fex->fe_len);
+}
+
+static inline loff_t pa_logical_end(struct ext4_sb_info *sbi,
+				    struct ext4_prealloc_space *pa)
+{
+	/* Use loff_t to avoid end exceeding ext4_lblk_t max. */
+	return (loff_t)pa->pa_lstart + EXT4_C2B(sbi, pa->pa_len);
+}
+
 typedef int (*ext4_mballoc_query_range_fn)(
 	struct super_block		*sb,
 	ext4_group_t			agno,

[PATCH 5.15 065/128] ext4: fix BUG in ext4_mb_new_inode_pa() due to overflow

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Baokun Li <libaokun1@huawei.com>

commit bc056e7163ac7db945366de219745cf94f32a3e6 upstream.

When we calculate the end position of ext4_free_extent, this position may
be exactly where ext4_lblk_t (i.e. uint) overflows. For example, if
ac_g_ex.fe_logical is 4294965248 and ac_orig_goal_len is 2048, then the
computed end is 0x100000000, which is 0. If ac->ac_o_ex.fe_logical is not
the first case of adjusting the best extent, that is, new_bex_end > 0, the
following BUG_ON will be triggered:

=========================================================
kernel BUG at fs/ext4/mballoc.c:5116!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 3 PID: 673 Comm: xfs_io Tainted: G E 6.5.0-rc1+ #279
RIP: 0010:ext4_mb_new_inode_pa+0xc5/0x430
Call Trace:
 <TASK>
 ext4_mb_use_best_found+0x203/0x2f0
 ext4_mb_try_best_found+0x163/0x240
 ext4_mb_regular_allocator+0x158/0x1550
 ext4_mb_new_blocks+0x86a/0xe10
 ext4_ext_map_blocks+0xb0c/0x13a0
 ext4_map_blocks+0x2cd/0x8f0
 ext4_iomap_begin+0x27b/0x400
 iomap_iter+0x222/0x3d0
 __iomap_dio_rw+0x243/0xcb0
 iomap_dio_rw+0x16/0x80
=========================================================

A simple reproducer demonstrating the problem:

	mkfs.ext4 -F /dev/sda -b 4096 100M
	mount /dev/sda /tmp/test
	fallocate -l1M /tmp/test/tmp
	fallocate -l10M /tmp/test/file
	fallocate -i -o 1M -l16777203M /tmp/test/file
	fsstress -d /tmp/test -l 0 -n 100000 -p 8 &
	sleep 10 && killall -9 fsstress
	rm -f /tmp/test/tmp
	xfs_io -c "open -ad /tmp/test/file" -c "pwrite -S 0xff 0 8192"

We simply refactor the logic for adjusting the best extent by adding
a temporary ext4_free_extent ex and use extent_logical_end() to avoid
overflow, which also simplifies the code.

Cc: stable@kernel.org # 6.4
Fixes: 93cdf49f6eca ("ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa()")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230724121059.11834-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/mballoc.c |   31 ++++++++++++++-----------------
 1 file changed, 14 insertions(+), 17 deletions(-)

--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -4664,8 +4664,11 @@ ext4_mb_new_inode_pa(struct ext4_allocat
 	pa = ac->ac_pa;
 
 	if (ac->ac_b_ex.fe_len < ac->ac_g_ex.fe_len) {
-		int new_bex_start;
-		int new_bex_end;
+		struct ext4_free_extent ex = {
+			.fe_logical = ac->ac_g_ex.fe_logical,
+			.fe_len = ac->ac_g_ex.fe_len,
+		};
+		loff_t orig_goal_end = extent_logical_end(sbi, &ex);
 
 		/* we can't allocate as much as normalizer wants.
 		 * so, found space must get proper lstart
@@ -4684,29 +4687,23 @@ ext4_mb_new_inode_pa(struct ext4_allocat
 		 *    still cover original start
 		 * 3. Else, keep the best ex at start of original request.
 		 */
-		new_bex_end = ac->ac_g_ex.fe_logical +
-			EXT4_C2B(sbi, ac->ac_g_ex.fe_len);
-		new_bex_start = new_bex_end - EXT4_C2B(sbi, ac->ac_b_ex.fe_len);
-		if (ac->ac_o_ex.fe_logical >= new_bex_start)
-			goto adjust_bex;
+		ex.fe_len = ac->ac_b_ex.fe_len;
 
-		new_bex_start = ac->ac_g_ex.fe_logical;
-		new_bex_end =
-			new_bex_start + EXT4_C2B(sbi, ac->ac_b_ex.fe_len);
-		if (ac->ac_o_ex.fe_logical < new_bex_end)
+		ex.fe_logical = orig_goal_end - EXT4_C2B(sbi, ex.fe_len);
+		if (ac->ac_o_ex.fe_logical >= ex.fe_logical)
 			goto adjust_bex;
 
-		new_bex_start = ac->ac_o_ex.fe_logical;
-		new_bex_end =
-			new_bex_start + EXT4_C2B(sbi, ac->ac_b_ex.fe_len);
+		ex.fe_logical = ac->ac_g_ex.fe_logical;
+		if (ac->ac_o_ex.fe_logical < extent_logical_end(sbi, &ex))
+			goto adjust_bex;
 
+		ex.fe_logical = ac->ac_o_ex.fe_logical;
 adjust_bex:
-		ac->ac_b_ex.fe_logical = new_bex_start;
+		ac->ac_b_ex.fe_logical = ex.fe_logical;
 
 		BUG_ON(ac->ac_o_ex.fe_logical < ac->ac_b_ex.fe_logical);
 		BUG_ON(ac->ac_o_ex.fe_len > ac->ac_b_ex.fe_len);
-		BUG_ON(new_bex_end > (ac->ac_g_ex.fe_logical +
-				      EXT4_C2B(sbi, ac->ac_g_ex.fe_len)));
+		BUG_ON(extent_logical_end(sbi, &ex) > orig_goal_end);
 	}
 
 	/* preallocation can change ac_b_ex, thus we store actually

[PATCH 5.15 066/128] ext4: avoid overlapping preallocations due to overflow

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Baokun Li <libaokun1@huawei.com>

commit bedc5d34632c21b5adb8ca7143d4c1f794507e4c upstream.

Let's say we want to allocate 2 blocks starting from 4294966386, after
predicting the file size, start is aligned to 4294965248, len is changed
to 2048, then end = start + size = 0x100000000. Since end is of
type ext4_lblk_t, i.e. uint, end is truncated to 0.

This causes (pa->pa_lstart >= end) to always hold when checking if the
current extent to be allocated crosses already preallocated blocks, so the
resulting ac_g_ex may cross already preallocated blocks. Hence we convert
the end type to loff_t and use pa_logical_end() to avoid overflow.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230724121059.11834-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/mballoc.c |   13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -4049,8 +4049,7 @@ ext4_mb_normalize_request(struct ext4_al
 	struct ext4_sb_info *sbi = EXT4_SB(ac->ac_sb);
 	struct ext4_super_block *es = sbi->s_es;
 	int bsbits, max;
-	ext4_lblk_t end;
-	loff_t size, start_off;
+	loff_t size, start_off, end;
 	loff_t orig_size __maybe_unused;
 	ext4_lblk_t start;
 	struct ext4_inode_info *ei = EXT4_I(ac->ac_inode);
@@ -4158,7 +4157,7 @@ ext4_mb_normalize_request(struct ext4_al
 	/* check we don't cross already preallocated blocks */
 	rcu_read_lock();
 	list_for_each_entry_rcu(pa, &ei->i_prealloc_list, pa_inode_list) {
-		ext4_lblk_t pa_end;
+		loff_t pa_end;
 
 		if (pa->pa_deleted)
 			continue;
@@ -4168,8 +4167,7 @@ ext4_mb_normalize_request(struct ext4_al
 			continue;
 		}
 
-		pa_end = pa->pa_lstart + EXT4_C2B(EXT4_SB(ac->ac_sb),
-						  pa->pa_len);
+		pa_end = pa_logical_end(EXT4_SB(ac->ac_sb), pa);
 
 		/* PA must not overlap original request */
 		BUG_ON(!(ac->ac_o_ex.fe_logical >= pa_end ||
@@ -4198,12 +4196,11 @@ ext4_mb_normalize_request(struct ext4_al
 	/* XXX: extra loop to check we really don't overlap preallocations */
 	rcu_read_lock();
 	list_for_each_entry_rcu(pa, &ei->i_prealloc_list, pa_inode_list) {
-		ext4_lblk_t pa_end;
+		loff_t pa_end;
 
 		spin_lock(&pa->pa_lock);
 		if (pa->pa_deleted == 0) {
-			pa_end = pa->pa_lstart + EXT4_C2B(EXT4_SB(ac->ac_sb),
-							  pa->pa_len);
+			pa_end = pa_logical_end(EXT4_SB(ac->ac_sb), pa);
 			BUG_ON(!(start >= pa_end || end <= pa->pa_lstart));
 		}
 		spin_unlock(&pa->pa_lock);

[PATCH 5.15 067/128] objtool/x86: add missing embedded_insn check

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Sperbeck <jsperbeck@google.com>

When dbf460087755 ("objtool/x86: Fixup frame-pointer vs rethunk")
was backported to some stable branches, the check for dest->embedded_insn
in is_special_call() was missed.  The result is that the warning it
was intended to suppress still appears.  For example on 6.1 (on kernels
before 6.1, the '-s' argument would instead be 'check'):

$ tools/objtool/objtool -s arch/x86/lib/retpoline.o
arch/x86/lib/retpoline.o: warning: objtool: srso_untrain_ret+0xd:
    call without frame pointer save/setup

With this patch, the warning is correctly suppressed, and the
kernel still passes the normal Google kernel developer tests.

Signed-off-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/objtool/check.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -2202,7 +2202,7 @@ static bool is_special_call(struct instr
 		if (!dest)
 			return false;
 
-		if (dest->fentry)
+		if (dest->fentry || dest->embedded_insn)
 			return true;
 	}
 

[PATCH 5.15 068/128] driver: platform: Add helper for safer setting of driver_override

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

commit 6c2f421174273de8f83cde4286d1c076d43a2d35 upstream.

Several core drivers and buses expect that driver_override is a
dynamically allocated memory thus later they can kfree() it.

However such assumption is not documented, there were in the past and
there are already users setting it to a string literal. This leads to
kfree() of static memory during device release (e.g. in error paths or
during unbind):

    kernel BUG at ../mm/slub.c:3960!
    Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
    ...
    (kfree) from [<c058da50>] (platform_device_release+0x88/0xb4)
    (platform_device_release) from [<c0585be0>] (device_release+0x2c/0x90)
    (device_release) from [<c0a69050>] (kobject_put+0xec/0x20c)
    (kobject_put) from [<c0f2f120>] (exynos5_clk_probe+0x154/0x18c)
    (exynos5_clk_probe) from [<c058de70>] (platform_drv_probe+0x6c/0xa4)
    (platform_drv_probe) from [<c058b7ac>] (really_probe+0x280/0x414)
    (really_probe) from [<c058baf4>] (driver_probe_device+0x78/0x1c4)
    (driver_probe_device) from [<c0589854>] (bus_for_each_drv+0x74/0xb8)
    (bus_for_each_drv) from [<c058b48c>] (__device_attach+0xd4/0x16c)
    (__device_attach) from [<c058a638>] (bus_probe_device+0x88/0x90)
    (bus_probe_device) from [<c05871fc>] (device_add+0x3dc/0x62c)
    (device_add) from [<c075ff10>] (of_platform_device_create_pdata+0x94/0xbc)
    (of_platform_device_create_pdata) from [<c07600ec>] (of_platform_bus_create+0x1a8/0x4fc)
    (of_platform_bus_create) from [<c0760150>] (of_platform_bus_create+0x20c/0x4fc)
    (of_platform_bus_create) from [<c07605f0>] (of_platform_populate+0x84/0x118)
    (of_platform_populate) from [<c0f3c964>] (of_platform_default_populate_init+0xa0/0xb8)
    (of_platform_default_populate_init) from [<c01031f8>] (do_one_initcall+0x8c/0x404)

Provide a helper which clearly documents the usage of driver_override.
This will allow later to reuse the helper and reduce the amount of
duplicated code.

Convert the platform driver to use a new helper and make the
driver_override field const char (it is not modified by the core).

Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220419113435.246203-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/base/driver.c           |   69 ++++++++++++++++++++++++++++++++++++++++
 drivers/base/platform.c         |   28 ++--------------
 include/linux/device/driver.h   |    2 +
 include/linux/platform_device.h |    6 ++-
 4 files changed, 80 insertions(+), 25 deletions(-)

--- a/drivers/base/driver.c
+++ b/drivers/base/driver.c
@@ -31,6 +31,75 @@ static struct device *next_device(struct
 }
 
 /**
+ * driver_set_override() - Helper to set or clear driver override.
+ * @dev: Device to change
+ * @override: Address of string to change (e.g. &device->driver_override);
+ *            The contents will be freed and hold newly allocated override.
+ * @s: NUL-terminated string, new driver name to force a match, pass empty
+ *     string to clear it ("" or "\n", where the latter is only for sysfs
+ *     interface).
+ * @len: length of @s
+ *
+ * Helper to set or clear driver override in a device, intended for the cases
+ * when the driver_override field is allocated by driver/bus code.
+ *
+ * Returns: 0 on success or a negative error code on failure.
+ */
+int driver_set_override(struct device *dev, const char **override,
+			const char *s, size_t len)
+{
+	const char *new, *old;
+	char *cp;
+
+	if (!override || !s)
+		return -EINVAL;
+
+	/*
+	 * The stored value will be used in sysfs show callback (sysfs_emit()),
+	 * which has a length limit of PAGE_SIZE and adds a trailing newline.
+	 * Thus we can store one character less to avoid truncation during sysfs
+	 * show.
+	 */
+	if (len >= (PAGE_SIZE - 1))
+		return -EINVAL;
+
+	if (!len) {
+		/* Empty string passed - clear override */
+		device_lock(dev);
+		old = *override;
+		*override = NULL;
+		device_unlock(dev);
+		kfree(old);
+
+		return 0;
+	}
+
+	cp = strnchr(s, len, '\n');
+	if (cp)
+		len = cp - s;
+
+	new = kstrndup(s, len, GFP_KERNEL);
+	if (!new)
+		return -ENOMEM;
+
+	device_lock(dev);
+	old = *override;
+	if (cp != s) {
+		*override = new;
+	} else {
+		/* "\n" passed - clear override */
+		kfree(new);
+		*override = NULL;
+	}
+	device_unlock(dev);
+
+	kfree(old);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(driver_set_override);
+
+/**
  * driver_for_each_device - Iterator for devices bound to a driver.
  * @drv: Driver we're iterating.
  * @start: Device to begin with
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -1270,31 +1270,11 @@ static ssize_t driver_override_store(str
 				     const char *buf, size_t count)
 {
 	struct platform_device *pdev = to_platform_device(dev);
-	char *driver_override, *old, *cp;
+	int ret;
 
-	/* We need to keep extra room for a newline */
-	if (count >= (PAGE_SIZE - 1))
-		return -EINVAL;
-
-	driver_override = kstrndup(buf, count, GFP_KERNEL);
-	if (!driver_override)
-		return -ENOMEM;
-
-	cp = strchr(driver_override, '\n');
-	if (cp)
-		*cp = '\0';
-
-	device_lock(dev);
-	old = pdev->driver_override;
-	if (strlen(driver_override)) {
-		pdev->driver_override = driver_override;
-	} else {
-		kfree(driver_override);
-		pdev->driver_override = NULL;
-	}
-	device_unlock(dev);
-
-	kfree(old);
+	ret = driver_set_override(dev, &pdev->driver_override, buf, count);
+	if (ret)
+		return ret;
 
 	return count;
 }
--- a/include/linux/device/driver.h
+++ b/include/linux/device/driver.h
@@ -150,6 +150,8 @@ extern int __must_check driver_create_fi
 extern void driver_remove_file(struct device_driver *driver,
 			       const struct driver_attribute *attr);
 
+int driver_set_override(struct device *dev, const char **override,
+			const char *s, size_t len);
 extern int __must_check driver_for_each_device(struct device_driver *drv,
 					       struct device *start,
 					       void *data,
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -31,7 +31,11 @@ struct platform_device {
 	struct resource	*resource;
 
 	const struct platform_device_id	*id_entry;
-	char *driver_override; /* Driver name to force a match */
+	/*
+	 * Driver name to force a match.  Do not set directly, because core
+	 * frees it.  Use driver_set_override() to set or clear it.
+	 */
+	const char *driver_override;
 
 	/* MFD cell pointer */
 	struct mfd_cell *mfd_cell;

[PATCH 5.15 069/128] rpmsg: Constify local variable in field store macro

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

commit e5f89131a06142e91073b6959d91cea73861d40e upstream.

Memory pointed by variable 'old' in field store macro is not modified,
so it can be made a pointer to const.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220419113435.246203-12-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rpmsg/rpmsg_core.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/rpmsg/rpmsg_core.c
+++ b/drivers/rpmsg/rpmsg_core.c
@@ -376,7 +376,8 @@ field##_store(struct device *dev, struct
 	      const char *buf, size_t sz)				\
 {									\
 	struct rpmsg_device *rpdev = to_rpmsg_device(dev);		\
-	char *new, *old;						\
+	const char *old;						\
+	char *new;							\
 									\
 	new = kstrndup(buf, sz, GFP_KERNEL);				\
 	if (!new)							\

[PATCH 5.15 070/128] rpmsg: Fix kfree() of static memory on setting driver_override

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

commit 42cd402b8fd4672b692400fe5f9eecd55d2794ac upstream.

The driver_override field from platform driver should not be initialized
from static memory (string literal) because the core later kfree() it,
for example when driver_override is set via sysfs.

Use dedicated helper to set driver_override properly.

Fixes: 950a7388f02b ("rpmsg: Turn name service into a stand alone driver")
Fixes: c0cdc19f84a4 ("rpmsg: Driver for user space endpoint interface")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220419113435.246203-13-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rpmsg/rpmsg_internal.h |   13 +++++++++++--
 include/linux/rpmsg.h          |    6 ++++--
 2 files changed, 15 insertions(+), 4 deletions(-)

--- a/drivers/rpmsg/rpmsg_internal.h
+++ b/drivers/rpmsg/rpmsg_internal.h
@@ -90,10 +90,19 @@ int rpmsg_release_channel(struct rpmsg_d
  */
 static inline int rpmsg_chrdev_register_device(struct rpmsg_device *rpdev)
 {
+	int ret;
+
 	strcpy(rpdev->id.name, "rpmsg_chrdev");
-	rpdev->driver_override = "rpmsg_chrdev";
+	ret = driver_set_override(&rpdev->dev, &rpdev->driver_override,
+				  rpdev->id.name, strlen(rpdev->id.name));
+	if (ret)
+		return ret;
+
+	ret = rpmsg_register_device(rpdev);
+	if (ret)
+		kfree(rpdev->driver_override);
 
-	return rpmsg_register_device(rpdev);
+	return ret;
 }
 
 #endif
--- a/include/linux/rpmsg.h
+++ b/include/linux/rpmsg.h
@@ -41,7 +41,9 @@ struct rpmsg_channel_info {
  * rpmsg_device - device that belong to the rpmsg bus
  * @dev: the device struct
  * @id: device id (used to match between rpmsg drivers and devices)
- * @driver_override: driver name to force a match
+ * @driver_override: driver name to force a match; do not set directly,
+ *                   because core frees it; use driver_set_override() to
+ *                   set or clear it.
  * @src: local address
  * @dst: destination address
  * @ept: the rpmsg endpoint of this channel
@@ -51,7 +53,7 @@ struct rpmsg_channel_info {
 struct rpmsg_device {
 	struct device dev;
 	struct rpmsg_device_id id;
-	char *driver_override;
+	const char *driver_override;
 	u32 src;
 	u32 dst;
 	struct rpmsg_endpoint *ept;

[PATCH 5.15 071/128] rpmsg: Fix calling device_lock() on non-initialized device

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

commit bb17d110cbf270d5247a6e261c5ad50e362d1675 upstream.

driver_set_override() helper uses device_lock() so it should not be
called before rpmsg_register_device() (which calls device_register()).
Effect can be seen with CONFIG_DEBUG_MUTEXES:

  DEBUG_LOCKS_WARN_ON(lock->magic != lock)
  WARNING: CPU: 3 PID: 57 at kernel/locking/mutex.c:582 __mutex_lock+0x1ec/0x430
  ...
  Call trace:
   __mutex_lock+0x1ec/0x430
   mutex_lock_nested+0x44/0x50
   driver_set_override+0x124/0x150
   qcom_glink_native_probe+0x30c/0x3b0
   glink_rpm_probe+0x274/0x350
   platform_probe+0x6c/0xe0
   really_probe+0x17c/0x3d0
   __driver_probe_device+0x114/0x190
   driver_probe_device+0x3c/0xf0
   ...

Refactor the rpmsg_register_device() function to use two-step device
registering (initialization + add) and call driver_set_override() in
proper moment.

This moves the code around, so while at it also NULL-ify the
rpdev->driver_override in error path to be sure it won't be kfree()
second time.

Fixes: 42cd402b8fd4 ("rpmsg: Fix kfree() of static memory on setting driver_override")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220429195946.1061725-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rpmsg/rpmsg_core.c     |   33 ++++++++++++++++++++++++++++++---
 drivers/rpmsg/rpmsg_internal.h |   14 +-------------
 drivers/rpmsg/rpmsg_ns.c       |    4 +---
 include/linux/rpmsg.h          |    8 ++++++++
 4 files changed, 40 insertions(+), 19 deletions(-)

--- a/drivers/rpmsg/rpmsg_core.c
+++ b/drivers/rpmsg/rpmsg_core.c
@@ -569,24 +569,51 @@ static struct bus_type rpmsg_bus = {
 	.remove		= rpmsg_dev_remove,
 };
 
-int rpmsg_register_device(struct rpmsg_device *rpdev)
+/*
+ * A helper for registering rpmsg device with driver override and name.
+ * Drivers should not be using it, but instead rpmsg_register_device().
+ */
+int rpmsg_register_device_override(struct rpmsg_device *rpdev,
+				   const char *driver_override)
 {
 	struct device *dev = &rpdev->dev;
 	int ret;
 
+	if (driver_override)
+		strcpy(rpdev->id.name, driver_override);
+
 	dev_set_name(&rpdev->dev, "%s.%s.%d.%d", dev_name(dev->parent),
 		     rpdev->id.name, rpdev->src, rpdev->dst);
 
 	rpdev->dev.bus = &rpmsg_bus;
 
-	ret = device_register(&rpdev->dev);
+	device_initialize(dev);
+	if (driver_override) {
+		ret = driver_set_override(dev, &rpdev->driver_override,
+					  driver_override,
+					  strlen(driver_override));
+		if (ret) {
+			dev_err(dev, "device_set_override failed: %d\n", ret);
+			return ret;
+		}
+	}
+
+	ret = device_add(dev);
 	if (ret) {
-		dev_err(dev, "device_register failed: %d\n", ret);
+		dev_err(dev, "device_add failed: %d\n", ret);
+		kfree(rpdev->driver_override);
+		rpdev->driver_override = NULL;
 		put_device(&rpdev->dev);
 	}
 
 	return ret;
 }
+EXPORT_SYMBOL(rpmsg_register_device_override);
+
+int rpmsg_register_device(struct rpmsg_device *rpdev)
+{
+	return rpmsg_register_device_override(rpdev, NULL);
+}
 EXPORT_SYMBOL(rpmsg_register_device);
 
 /*
--- a/drivers/rpmsg/rpmsg_internal.h
+++ b/drivers/rpmsg/rpmsg_internal.h
@@ -90,19 +90,7 @@ int rpmsg_release_channel(struct rpmsg_d
  */
 static inline int rpmsg_chrdev_register_device(struct rpmsg_device *rpdev)
 {
-	int ret;
-
-	strcpy(rpdev->id.name, "rpmsg_chrdev");
-	ret = driver_set_override(&rpdev->dev, &rpdev->driver_override,
-				  rpdev->id.name, strlen(rpdev->id.name));
-	if (ret)
-		return ret;
-
-	ret = rpmsg_register_device(rpdev);
-	if (ret)
-		kfree(rpdev->driver_override);
-
-	return ret;
+	return rpmsg_register_device_override(rpdev, "rpmsg_ctrl");
 }
 
 #endif
--- a/drivers/rpmsg/rpmsg_ns.c
+++ b/drivers/rpmsg/rpmsg_ns.c
@@ -20,12 +20,10 @@
  */
 int rpmsg_ns_register_device(struct rpmsg_device *rpdev)
 {
-	strcpy(rpdev->id.name, "rpmsg_ns");
-	rpdev->driver_override = "rpmsg_ns";
 	rpdev->src = RPMSG_NS_ADDR;
 	rpdev->dst = RPMSG_NS_ADDR;
 
-	return rpmsg_register_device(rpdev);
+	return rpmsg_register_device_override(rpdev, "rpmsg_ns");
 }
 EXPORT_SYMBOL(rpmsg_ns_register_device);
 
--- a/include/linux/rpmsg.h
+++ b/include/linux/rpmsg.h
@@ -165,6 +165,8 @@ static inline __rpmsg64 cpu_to_rpmsg64(s
 
 #if IS_ENABLED(CONFIG_RPMSG)
 
+int rpmsg_register_device_override(struct rpmsg_device *rpdev,
+				   const char *driver_override);
 int rpmsg_register_device(struct rpmsg_device *rpdev);
 int rpmsg_unregister_device(struct device *parent,
 			    struct rpmsg_channel_info *chinfo);
@@ -190,6 +192,12 @@ __poll_t rpmsg_poll(struct rpmsg_endpoin
 
 #else
 
+static inline int rpmsg_register_device_override(struct rpmsg_device *rpdev,
+						 const char *driver_override)
+{
+	return -ENXIO;
+}
+
 static inline int rpmsg_register_device(struct rpmsg_device *rpdev)
 {
 	return -ENXIO;

[PATCH 5.15 072/128] rpmsg: glink: Release driver_override

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjorn Andersson <quic_bjorande@quicinc.com>

commit fb80ef67e8ff6a00d3faad4cb348dafdb8eccfd8 upstream.

Upon termination of the rpmsg_device, driver_override needs to be freed
to avoid leaking the potentially assigned string.

Fixes: 42cd402b8fd4 ("rpmsg: Fix kfree() of static memory on setting driver_override")
Fixes: 39e47767ec9b ("rpmsg: Add driver_override device attribute for rpmsg_device")
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109223931.1706429-1-quic_bjorande@quicinc.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rpmsg/qcom_glink_native.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/rpmsg/qcom_glink_native.c
+++ b/drivers/rpmsg/qcom_glink_native.c
@@ -1395,6 +1395,7 @@ static void qcom_glink_rpdev_release(str
 	struct glink_channel *channel = to_glink_channel(rpdev->ept);
 
 	channel->rpdev = NULL;
+	kfree(rpdev->driver_override);
 	kfree(rpdev);
 }
 
@@ -1623,6 +1624,7 @@ static void qcom_glink_device_release(st
 
 	/* Release qcom_glink_alloc_channel() reference */
 	kref_put(&channel->refcount, qcom_glink_channel_release);
+	kfree(rpdev->driver_override);
 	kfree(rpdev);
 }
 

[PATCH 5.15 073/128] rpmsg: Fix possible refcount leak in rpmsg_register_device_override()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hangyu Hua <hbh25y@gmail.com>

commit d7bd416d35121c95fe47330e09a5c04adbc5f928 upstream.

rpmsg_register_device_override need to call put_device to free vch when
driver_set_override fails.

Fix this by adding a put_device() to the error path.

Fixes: bb17d110cbf2 ("rpmsg: Fix calling device_lock() on non-initialized device")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220624024120.11576-1-hbh25y@gmail.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rpmsg/rpmsg_core.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/rpmsg/rpmsg_core.c
+++ b/drivers/rpmsg/rpmsg_core.c
@@ -594,6 +594,7 @@ int rpmsg_register_device_override(struc
 					  strlen(driver_override));
 		if (ret) {
 			dev_err(dev, "device_set_override failed: %d\n", ret);
+			put_device(dev);
 			return ret;
 		}
 	}

[PATCH 5.15 074/128] x86: Fix .brk attribute in linker script

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Juergen Gross <jgross@suse.com>

commit 7e09ac27f43b382f5fe9bb7c7f4c465ece1f8a23 upstream.

Commit in Fixes added the "NOLOAD" attribute to the .brk section as a
"failsafe" measure.

Unfortunately, this leads to the linker no longer covering the .brk
section in a program header, resulting in the kernel loader not knowing
that the memory for the .brk section must be reserved.

This has led to crashes when loading the kernel as PV dom0 under Xen,
but other scenarios could be hit by the same problem (e.g. in case an
uncompressed kernel is used and the initrd is placed directly behind
it).

So drop the "NOLOAD" attribute. This has been verified to correctly
cover the .brk section by a program header of the resulting ELF file.

Fixes: e32683c6f7d2 ("x86/mm: Fix RESERVE_BRK() for older binutils")
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20220630071441.28576-4-jgross@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/vmlinux.lds.S |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -411,7 +411,7 @@ SECTIONS
 	__end_of_kernel_reserve = .;
 
 	. = ALIGN(PAGE_SIZE);
-	.brk (NOLOAD) : AT(ADDR(.brk) - LOAD_OFFSET) {
+	.brk : AT(ADDR(.brk) - LOAD_OFFSET) {
 		__brk_base = .;
 		. += 64 * 1024;		/* 64k alignment slop space */
 		*(.bss..brk)		/* areas brk users have reserved */

[PATCH 5.15 075/128] ASoC: simple-card: fixup asoc_simple_probe() error handling

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

[ Upstream commit 41bae58df411f9accf01ea660730649b2fab1dab ]

asoc_simple_probe() is used for both "DT probe" (A) and "platform probe"
(B). It uses "goto err" when error case, but it is not needed for
"platform probe" case (B). Thus it is using "return" directly there.

	static int asoc_simple_probe(...)
	{
 ^		if (...) {
 |			...
(A)			if (ret < 0)
 |				goto err;
 v		} else {
 ^			...
 |			if (ret < 0)
(B)				return -Exxx;
 v		}

		...
 ^		if (ret < 0)
(C)			goto err;
 v		...

	err:
(D)		simple_util_clean_reference(card);

		return ret;
	}

Both case are using (C) part, and it calls (D) when err case.
But (D) will do nothing for (B) case.
Because of these behavior, current code itself is not wrong,
but is confusable, and more, static analyzing tool will warning on
(B) part (should use goto err).

To avoid static analyzing tool warning, this patch uses "goto err"
on (B) part.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o7hy7mlh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/generic/simple-card.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c
index 283aa21879aa5..95e4c53cd90c7 100644
--- a/sound/soc/generic/simple-card.c
+++ b/sound/soc/generic/simple-card.c
@@ -680,10 +680,12 @@ static int asoc_simple_probe(struct platform_device *pdev)
 		struct snd_soc_dai_link *dai_link = priv->dai_link;
 		struct simple_dai_props *dai_props = priv->dai_props;
 
+		ret = -EINVAL;
+
 		cinfo = dev->platform_data;
 		if (!cinfo) {
 			dev_err(dev, "no info for asoc-simple-card\n");
-			return -EINVAL;
+			goto err;
 		}
 
 		if (!cinfo->name ||
@@ -692,7 +694,7 @@ static int asoc_simple_probe(struct platform_device *pdev)
 		    !cinfo->platform ||
 		    !cinfo->cpu_dai.name) {
 			dev_err(dev, "insufficient asoc_simple_card_info settings\n");
-			return -EINVAL;
+			goto err;
 		}
 
 		cpus			= dai_link->cpus;
-- 
2.42.0

[PATCH 5.15 076/128] net: sched: cls_u32: Fix allocation size in u32_init()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gustavo A. R. Silva <gustavoars@kernel.org>

[ Upstream commit c4d49196ceec80e30e8d981410d73331b49b7850 ]

commit d61491a51f7e ("net/sched: cls_u32: Replace one-element array
with flexible-array member") incorrecly replaced an instance of
`sizeof(*tp_c)` with `struct_size(tp_c, hlist->ht, 1)`. This results
in a an over-allocation of 8 bytes.

This change is wrong because `hlist` in `struct tc_u_common` is a
pointer:

net/sched/cls_u32.c:
struct tc_u_common {
        struct tc_u_hnode __rcu *hlist;
        void                    *ptr;
        int                     refcnt;
        struct idr              handle_idr;
        struct hlist_node       hnode;
        long                    knodes;
};

So, the use of `struct_size()` makes no sense: we don't need to allocate
any extra space for a flexible-array member. `sizeof(*tp_c)` is just fine.

So, `struct_size(tp_c, hlist->ht, 1)` translates to:

sizeof(*tp_c) + sizeof(tp_c->hlist->ht) ==
sizeof(struct tc_u_common) + sizeof(struct tc_u_knode *) ==
						144 + 8  == 0x98 (byes)
						     ^^^
						      |
						unnecessary extra
						allocation size

$ pahole -C tc_u_common net/sched/cls_u32.o
struct tc_u_common {
	struct tc_u_hnode *        hlist;                /*     0     8 */
	void *                     ptr;                  /*     8     8 */
	int                        refcnt;               /*    16     4 */

	/* XXX 4 bytes hole, try to pack */

	struct idr                 handle_idr;           /*    24    96 */
	/* --- cacheline 1 boundary (64 bytes) was 56 bytes ago --- */
	struct hlist_node          hnode;                /*   120    16 */
	/* --- cacheline 2 boundary (128 bytes) was 8 bytes ago --- */
	long int                   knodes;               /*   136     8 */

	/* size: 144, cachelines: 3, members: 6 */
	/* sum members: 140, holes: 1, sum holes: 4 */
	/* last cacheline: 16 bytes */
};

And with `sizeof(*tp_c)`, we have:

	sizeof(*tp_c) == sizeof(struct tc_u_common) == 144 == 0x90 (bytes)

which is the correct and original allocation size.

Fix this issue by replacing `struct_size(tp_c, hlist->ht, 1)` with
`sizeof(*tp_c)`, and avoid allocating 8 too many bytes.

The following difference in binary output is expected and reflects the
desired change:

| net/sched/cls_u32.o
| @@ -6148,7 +6148,7 @@
| include/linux/slab.h:599
|     2cf5:      mov    0x0(%rip),%rdi        # 2cfc <u32_init+0xfc>
|                        2cf8: R_X86_64_PC32     kmalloc_caches+0xc
|-    2cfc:      mov    $0x98,%edx
|+    2cfc:      mov    $0x90,%edx

Reported-by: Alejandro Colomar <alx@kernel.org>
Closes: https://lore.kernel.org/lkml/09b4a2ce-da74-3a19-6961-67883f634d98@kernel.org/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/cls_u32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sched/cls_u32.c b/net/sched/cls_u32.c
index 17edcf1d1c3b6..440c29dc058ed 100644
--- a/net/sched/cls_u32.c
+++ b/net/sched/cls_u32.c
@@ -364,7 +364,7 @@ static int u32_init(struct tcf_proto *tp)
 	idr_init(&root_ht->handle_idr);
 
 	if (tp_c == NULL) {
-		tp_c = kzalloc(struct_size(tp_c, hlist->ht, 1), GFP_KERNEL);
+		tp_c = kzalloc(sizeof(*tp_c), GFP_KERNEL);
 		if (tp_c == NULL) {
 			kfree(root_ht);
 			return -ENOBUFS;
-- 
2.42.0

[PATCH 5.15 077/128] irqchip/riscv-intc: Mark all INTC nodes as initialized

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anup Patel <apatel@ventanamicro.com>

[ Upstream commit e13cd66bd821be417c498a34928652db4ac6b436 ]

The RISC-V INTC local interrupts are per-HART (or per-CPU) so we
create INTC IRQ domain only for the INTC node belonging to the boot
HART. This means only the boot HART INTC node will be marked as
initialized and other INTC nodes won't be marked which results
downstream interrupt controllers (such as PLIC, IMSIC and APLIC
direct-mode) not being probed due to missing device suppliers.

To address this issue, we mark all INTC node for which we don't
create IRQ domain as initialized.

Reported-by: Dmitry Dunaev <dunaev@tecon.ru>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230926102801.1591126-1-dunaev@tecon.ru
Link: https://lore.kernel.org/r/20231003044403.1974628-4-apatel@ventanamicro.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-riscv-intc.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c
index 8017f6d32d52b..54c99441c1b54 100644
--- a/drivers/irqchip/irq-riscv-intc.c
+++ b/drivers/irqchip/irq-riscv-intc.c
@@ -109,8 +109,16 @@ static int __init riscv_intc_init(struct device_node *node,
 	 * for each INTC DT node. We only need to do INTC initialization
 	 * for the INTC DT node belonging to boot CPU (or boot HART).
 	 */
-	if (riscv_hartid_to_cpuid(hartid) != smp_processor_id())
+	if (riscv_hartid_to_cpuid(hartid) != smp_processor_id()) {
+		/*
+		 * The INTC nodes of each CPU are suppliers for downstream
+		 * interrupt controllers (such as PLIC, IMSIC and APLIC
+		 * direct-mode) so we should mark an INTC node as initialized
+		 * if we are not creating IRQ domain for it.
+		 */
+		fwnode_dev_initialized(of_fwnode_handle(node), true);
 		return 0;
+	}
 
 	intc_domain = irq_domain_add_linear(node, BITS_PER_LONG,
 					    &riscv_intc_domain_ops, NULL);
-- 
2.42.0

[PATCH 5.15 078/128] irqchip/stm32-exti: add missing DT IRQ flag translation

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Wolsieffer <ben.wolsieffer@hefring.com>

[ Upstream commit 8554cba1d6dbd3c74e0549e28ddbaccbb1d6b30a ]

The STM32F4/7 EXTI driver was missing the xlate callback, so IRQ trigger
flags specified in the device tree were being ignored. This was
preventing the RTC alarm interrupt from working, because it must be set
to trigger on the rising edge to function correctly.

Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231003162003.1649967-1-ben.wolsieffer@hefring.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-stm32-exti.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/irqchip/irq-stm32-exti.c b/drivers/irqchip/irq-stm32-exti.c
index 33c76710f845f..9c150c402f0ba 100644
--- a/drivers/irqchip/irq-stm32-exti.c
+++ b/drivers/irqchip/irq-stm32-exti.c
@@ -408,6 +408,7 @@ static const struct irq_domain_ops irq_exti_domain_ops = {
 	.map	= irq_map_generic_chip,
 	.alloc  = stm32_exti_alloc,
 	.free	= stm32_exti_free,
+	.xlate	= irq_domain_xlate_twocell,
 };
 
 static void stm32_irq_ack(struct irq_data *d)
-- 
2.42.0

[PATCH 5.15 079/128] dmaengine: ste_dma40: Fix PM disable depth imbalance in d40_probe

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zhang Shurong <zhang_shurong@foxmail.com>

[ Upstream commit 0618c077a8c20e8c81e367988f70f7e32bb5a717 ]

The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context.
We fix it by calling pm_runtime_disable when error returns.

Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/tencent_DD2D371DB5925B4B602B1E1D0A5FA88F1208@qq.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/ste_dma40.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index cb6b0e9ed5adc..0e9cb01682647 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -3697,6 +3697,7 @@ static int __init d40_probe(struct platform_device *pdev)
 		regulator_disable(base->lcpa_regulator);
 		regulator_put(base->lcpa_regulator);
 	}
+	pm_runtime_disable(base->dev);
 
 	kfree(base->lcla_pool.alloc_map);
 	kfree(base->lookup_log_chans);
-- 
2.42.0

[PATCH 5.15 080/128] powerpc/85xx: Fix math emulation exception

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christophe Leroy <christophe.leroy@csgroup.eu>

[ Upstream commit 8e8a12ecbc86700b5e1a3596ce2b3c43dafad336 ]

Booting mpc85xx_defconfig kernel on QEMU leads to:

Bad trap at PC: fe9bab0, SR: 2d000, vector=800
awk[82]: unhandled trap (5) at 0 nip fe9bab0 lr fe9e01c code 5 in libc-2.27.so[fe5a000+17a000]
awk[82]: code: 3aa00000 3a800010 4bffe03c 9421fff0 7ca62b78 38a00000 93c10008 83c10008
awk[82]: code: 38210010 4bffdec8 9421ffc0 7c0802a6 <fc00048e> d8010008 4815190d 93810030
Trace/breakpoint trap
WARNING: no useful console

This is because allthough CONFIG_MATH_EMULATION is selected,
Exception 800 calls unknown_exception().

Call emulation_assist_interrupt() instead.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/066caa6d9480365da9b8ed83692d7101e10ac5f8.1695657339.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/head_fsl_booke.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 0a9a0f301474d..40687e271c106 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -394,7 +394,7 @@ interrupt_base:
 #ifdef CONFIG_PPC_FPU
 	FP_UNAVAILABLE_EXCEPTION
 #else
-	EXCEPTION(0x0800, FP_UNAVAIL, FloatingPointUnavailable, unknown_exception)
+	EXCEPTION(0x0800, FP_UNAVAIL, FloatingPointUnavailable, emulation_assist_interrupt)
 #endif
 
 	/* System Call Interrupt */
-- 
2.42.0

[PATCH 5.15 081/128] Input: synaptics-rmi4 - handle reset delay when using SMBus trsnsport

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

[ Upstream commit 5030b2fe6aab37fe42d14f31842ea38be7c55c57 ]

Touch controllers need some time after receiving reset command for the
firmware to finish re-initializing and be ready to respond to commands
from the host. The driver already had handling for the post-reset delay
for I2C and SPI transports, this change adds the handling to
SMBus-connected devices.

SMBus devices are peculiar because they implement legacy PS/2
compatibility mode, so reset is actually issued by psmouse driver on the
associated serio port, after which the control is passed to the RMI4
driver with SMBus companion device.

Note that originally the delay was added to psmouse driver in
92e24e0e57f7 ("Input: psmouse - add delay when deactivating for SMBus
mode"), but that resulted in an unwanted delay in "fast" reconnect
handler for the serio port, so it was decided to revert the patch and
have the delay being handled in the RMI4 driver, similar to the other
transports.

Tested-by: Jeffery Miller <jefferymiller@google.com>
Link: https://lore.kernel.org/r/ZR1yUFJ8a9Zt606N@penguin
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/mouse/synaptics.c |  1 +
 drivers/input/rmi4/rmi_smbus.c  | 50 ++++++++++++++++++---------------
 2 files changed, 29 insertions(+), 22 deletions(-)

diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index ecc7ca653d75c..c3a341c16d45a 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -1752,6 +1752,7 @@ static int synaptics_create_intertouch(struct psmouse *psmouse,
 		psmouse_matches_pnp_id(psmouse, topbuttonpad_pnp_ids) &&
 		!SYN_CAP_EXT_BUTTONS_STICK(info->ext_cap_10);
 	const struct rmi_device_platform_data pdata = {
+		.reset_delay_ms = 30,
 		.sensor_pdata = {
 			.sensor_type = rmi_sensor_touchpad,
 			.axis_align.flip_y = true,
diff --git a/drivers/input/rmi4/rmi_smbus.c b/drivers/input/rmi4/rmi_smbus.c
index 2407ea43de59b..f38bf9a5f599d 100644
--- a/drivers/input/rmi4/rmi_smbus.c
+++ b/drivers/input/rmi4/rmi_smbus.c
@@ -235,12 +235,29 @@ static void rmi_smb_clear_state(struct rmi_smb_xport *rmi_smb)
 
 static int rmi_smb_enable_smbus_mode(struct rmi_smb_xport *rmi_smb)
 {
-	int retval;
+	struct i2c_client *client = rmi_smb->client;
+	int smbus_version;
+
+	/*
+	 * psmouse driver resets the controller, we only need to wait
+	 * to give the firmware chance to fully reinitialize.
+	 */
+	if (rmi_smb->xport.pdata.reset_delay_ms)
+		msleep(rmi_smb->xport.pdata.reset_delay_ms);
 
 	/* we need to get the smbus version to activate the touchpad */
-	retval = rmi_smb_get_version(rmi_smb);
-	if (retval < 0)
-		return retval;
+	smbus_version = rmi_smb_get_version(rmi_smb);
+	if (smbus_version < 0)
+		return smbus_version;
+
+	rmi_dbg(RMI_DEBUG_XPORT, &client->dev, "Smbus version is %d",
+		smbus_version);
+
+	if (smbus_version != 2 && smbus_version != 3) {
+		dev_err(&client->dev, "Unrecognized SMB version %d\n",
+				smbus_version);
+		return -ENODEV;
+	}
 
 	return 0;
 }
@@ -253,11 +270,10 @@ static int rmi_smb_reset(struct rmi_transport_dev *xport, u16 reset_addr)
 	rmi_smb_clear_state(rmi_smb);
 
 	/*
-	 * we do not call the actual reset command, it has to be handled in
-	 * PS/2 or there will be races between PS/2 and SMBus.
-	 * PS/2 should ensure that a psmouse_reset is called before
-	 * intializing the device and after it has been removed to be in a known
-	 * state.
+	 * We do not call the actual reset command, it has to be handled in
+	 * PS/2 or there will be races between PS/2 and SMBus. PS/2 should
+	 * ensure that a psmouse_reset is called before initializing the
+	 * device and after it has been removed to be in a known state.
 	 */
 	return rmi_smb_enable_smbus_mode(rmi_smb);
 }
@@ -273,7 +289,6 @@ static int rmi_smb_probe(struct i2c_client *client,
 {
 	struct rmi_device_platform_data *pdata = dev_get_platdata(&client->dev);
 	struct rmi_smb_xport *rmi_smb;
-	int smbus_version;
 	int error;
 
 	if (!pdata) {
@@ -312,18 +327,9 @@ static int rmi_smb_probe(struct i2c_client *client,
 	rmi_smb->xport.proto_name = "smb";
 	rmi_smb->xport.ops = &rmi_smb_ops;
 
-	smbus_version = rmi_smb_get_version(rmi_smb);
-	if (smbus_version < 0)
-		return smbus_version;
-
-	rmi_dbg(RMI_DEBUG_XPORT, &client->dev, "Smbus version is %d",
-		smbus_version);
-
-	if (smbus_version != 2 && smbus_version != 3) {
-		dev_err(&client->dev, "Unrecognized SMB version %d\n",
-				smbus_version);
-		return -ENODEV;
-	}
+	error = rmi_smb_enable_smbus_mode(rmi_smb);
+	if (error)
+		return error;
 
 	i2c_set_clientdata(client, rmi_smb);
 
-- 
2.42.0

[PATCH 5.15 082/128] fbdev: atyfb: only use ioremap_uc() on i386 and ia64

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit c1a8d1d0edb71dec15c9649cb56866c71c1ecd9e ]

ioremap_uc() is only meaningful on old x86-32 systems with the PAT
extension, and on ia64 with its slightly unconventional ioremap()
behavior, everywhere else this is the same as ioremap() anyway.

Change the only driver that still references ioremap_uc() to only do so
on x86-32/ia64 in order to allow removing that interface at some
point in the future for the other architectures.

On some architectures, ioremap_uc() just returns NULL, changing
the driver to call ioremap() means that they now have a chance
of working correctly.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/aty/atyfb_base.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/video/fbdev/aty/atyfb_base.c b/drivers/video/fbdev/aty/atyfb_base.c
index 1aef3d6ebd880..246bf67b32ea0 100644
--- a/drivers/video/fbdev/aty/atyfb_base.c
+++ b/drivers/video/fbdev/aty/atyfb_base.c
@@ -3447,11 +3447,15 @@ static int atyfb_setup_generic(struct pci_dev *pdev, struct fb_info *info,
 	}
 
 	info->fix.mmio_start = raddr;
+#if defined(__i386__) || defined(__ia64__)
 	/*
 	 * By using strong UC we force the MTRR to never have an
 	 * effect on the MMIO region on both non-PAT and PAT systems.
 	 */
 	par->ati_regbase = ioremap_uc(info->fix.mmio_start, 0x1000);
+#else
+	par->ati_regbase = ioremap(info->fix.mmio_start, 0x1000);
+#endif
 	if (par->ati_regbase == NULL)
 		return -ENOMEM;
 
-- 
2.42.0

[PATCH 5.15 083/128] fs/ntfs3: Add ckeck in ni_update_parent()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>

[ Upstream commit 87d1888aa40f25773fa0b948bcb2545f97e2cb15 ]

Check simple case when parent inode equals current inode.

Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ntfs3/frecord.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/fs/ntfs3/frecord.c b/fs/ntfs3/frecord.c
index 9a1744955d1cf..73a56d7ac84b7 100644
--- a/fs/ntfs3/frecord.c
+++ b/fs/ntfs3/frecord.c
@@ -3144,6 +3144,12 @@ static bool ni_update_parent(struct ntfs_inode *ni, struct NTFS_DUP_INFO *dup,
 		if (!fname || !memcmp(&fname->dup, dup, sizeof(fname->dup)))
 			continue;
 
+		/* Check simple case when parent inode equals current inode. */
+		if (ino_get(&fname->home) == ni->vfs_inode.i_ino) {
+			ntfs_set_state(sbi, NTFS_DIRTY_ERROR);
+			continue;
+		}
+
 		/* ntfs_iget5 may sleep. */
 		dir = ntfs_iget5(sb, &fname->home, NULL);
 		if (IS_ERR(dir)) {
-- 
2.42.0

[PATCH 5.15 084/128] fs/ntfs3: Write immediately updated ntfs state

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>

[ Upstream commit 06ccfb00645990a9fcc14249e6d1c25921ecb836 ]

Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ntfs3/fsntfs.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

diff --git a/fs/ntfs3/fsntfs.c b/fs/ntfs3/fsntfs.c
index 11de2d469e9e8..4413f6da68e60 100644
--- a/fs/ntfs3/fsntfs.c
+++ b/fs/ntfs3/fsntfs.c
@@ -958,18 +958,11 @@ int ntfs_set_state(struct ntfs_sb_info *sbi, enum NTFS_DIRTY_FLAGS dirty)
 	if (err)
 		return err;
 
-	mark_inode_dirty(&ni->vfs_inode);
+	mark_inode_dirty_sync(&ni->vfs_inode);
 	/* verify(!ntfs_update_mftmirr()); */
 
-	/*
-	 * If we used wait=1, sync_inode_metadata waits for the io for the
-	 * inode to finish. It hangs when media is removed.
-	 * So wait=0 is sent down to sync_inode_metadata
-	 * and filemap_fdatawrite is used for the data blocks.
-	 */
-	err = sync_inode_metadata(&ni->vfs_inode, 0);
-	if (!err)
-		err = filemap_fdatawrite(ni->vfs_inode.i_mapping);
+	/* write mft record on disk. */
+	err = _ni_write_inode(&ni->vfs_inode, 1);
 
 	return err;
 }
-- 
2.42.0

[PATCH 5.15 085/128] fs/ntfs3: Use kvmalloc instead of kmalloc(... __GFP_NOWARN)

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>

[ Upstream commit fc471e39e38fea6677017cbdd6d928088a59fc67 ]

Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ntfs3/attrlist.c | 15 +++++++++++++--
 fs/ntfs3/bitmap.c   |  3 ++-
 fs/ntfs3/super.c    |  2 +-
 3 files changed, 16 insertions(+), 4 deletions(-)

diff --git a/fs/ntfs3/attrlist.c b/fs/ntfs3/attrlist.c
index 81c22df27c725..0c6a68e71e7d4 100644
--- a/fs/ntfs3/attrlist.c
+++ b/fs/ntfs3/attrlist.c
@@ -52,7 +52,8 @@ int ntfs_load_attr_list(struct ntfs_inode *ni, struct ATTRIB *attr)
 
 	if (!attr->non_res) {
 		lsize = le32_to_cpu(attr->res.data_size);
-		le = kmalloc(al_aligned(lsize), GFP_NOFS | __GFP_NOWARN);
+		/* attr is resident: lsize < record_size (1K or 4K) */
+		le = kvmalloc(al_aligned(lsize), GFP_KERNEL);
 		if (!le) {
 			err = -ENOMEM;
 			goto out;
@@ -80,7 +81,17 @@ int ntfs_load_attr_list(struct ntfs_inode *ni, struct ATTRIB *attr)
 		if (err < 0)
 			goto out;
 
-		le = kmalloc(al_aligned(lsize), GFP_NOFS | __GFP_NOWARN);
+		/* attr is nonresident.
+		 * The worst case:
+		 * 1T (2^40) extremely fragmented file.
+		 * cluster = 4K (2^12) => 2^28 fragments
+		 * 2^9 fragments per one record => 2^19 records
+		 * 2^5 bytes of ATTR_LIST_ENTRY per one record => 2^24 bytes.
+		 *
+		 * the result is 16M bytes per attribute list.
+		 * Use kvmalloc to allocate in range [several Kbytes - dozen Mbytes]
+		 */
+		le = kvmalloc(al_aligned(lsize), GFP_KERNEL);
 		if (!le) {
 			err = -ENOMEM;
 			goto out;
diff --git a/fs/ntfs3/bitmap.c b/fs/ntfs3/bitmap.c
index 3261b69cdac33..21536b72aa5e5 100644
--- a/fs/ntfs3/bitmap.c
+++ b/fs/ntfs3/bitmap.c
@@ -667,7 +667,8 @@ int wnd_init(struct wnd_bitmap *wnd, struct super_block *sb, size_t nbits)
 		wnd->bits_last = wbits;
 
 	wnd->free_bits =
-		kcalloc(wnd->nwnd, sizeof(u16), GFP_NOFS | __GFP_NOWARN);
+		kvmalloc_array(wnd->nwnd, sizeof(u16), GFP_KERNEL | __GFP_ZERO);
+
 	if (!wnd->free_bits)
 		return -ENOMEM;
 
diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c
index 33b1833ad525c..fbaf1c84311be 100644
--- a/fs/ntfs3/super.c
+++ b/fs/ntfs3/super.c
@@ -1136,7 +1136,7 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc)
 		goto put_inode_out;
 	}
 	bytes = inode->i_size;
-	sbi->def_table = t = kmalloc(bytes, GFP_NOFS | __GFP_NOWARN);
+	sbi->def_table = t = kvmalloc(bytes, GFP_KERNEL);
 	if (!t) {
 		err = -ENOMEM;
 		goto put_inode_out;
-- 
2.42.0

[PATCH 5.15 086/128] fs/ntfs3: Fix possible NULL-ptr-deref in ni_readpage_cmpr()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>

[ Upstream commit 32e9212256b88f35466642f9c939bb40cfb2c2de ]

Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ntfs3/frecord.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/ntfs3/frecord.c b/fs/ntfs3/frecord.c
index 73a56d7ac84b7..b02778cbb1d34 100644
--- a/fs/ntfs3/frecord.c
+++ b/fs/ntfs3/frecord.c
@@ -2100,7 +2100,7 @@ int ni_readpage_cmpr(struct ntfs_inode *ni, struct page *page)
 
 	for (i = 0; i < pages_per_frame; i++) {
 		pg = pages[i];
-		if (i == idx)
+		if (i == idx || !pg)
 			continue;
 		unlock_page(pg);
 		put_page(pg);
-- 
2.42.0

[PATCH 5.15 087/128] fs/ntfs3: Fix NULL pointer dereference on error in attr_allocate_frame()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>

[ Upstream commit 9c689c8dc86f8ca99bf91c05f24c8bab38fe7d5f ]

Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ntfs3/attrib.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/fs/ntfs3/attrib.c b/fs/ntfs3/attrib.c
index 321d55b3ca17d..1d5ac2164d94f 100644
--- a/fs/ntfs3/attrib.c
+++ b/fs/ntfs3/attrib.c
@@ -1583,10 +1583,8 @@ int attr_allocate_frame(struct ntfs_inode *ni, CLST frame, size_t compr_size,
 			le_b = NULL;
 			attr_b = ni_find_attr(ni, NULL, &le_b, ATTR_DATA, NULL,
 					      0, NULL, &mi_b);
-			if (!attr_b) {
-				err = -ENOENT;
-				goto out;
-			}
+			if (!attr_b)
+				return -ENOENT;
 
 			attr = attr_b;
 			le = le_b;
-- 
2.42.0

[PATCH 5.15 088/128] fs/ntfs3: Fix directory element type detection

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gabriel Marcano <gabemarcano@yahoo.com>

[ Upstream commit 85a4780dc96ed9dd643bbadf236552b3320fae26 ]

Calling stat() from userspace correctly identified junctions in an NTFS
partition as symlinks, but using readdir() and iterating through the
directory containing the same junction did not identify the junction
as a symlink.

When emitting directory contents, check FILE_ATTRIBUTE_REPARSE_POINT
attribute to detect junctions and report them as links.

Signed-off-by: Gabriel Marcano <gabemarcano@yahoo.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ntfs3/dir.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/fs/ntfs3/dir.c b/fs/ntfs3/dir.c
index fb438d6040409..d4d9f4ffb6d9a 100644
--- a/fs/ntfs3/dir.c
+++ b/fs/ntfs3/dir.c
@@ -309,7 +309,11 @@ static inline int ntfs_filldir(struct ntfs_sb_info *sbi, struct ntfs_inode *ni,
 		return 0;
 	}
 
-	dt_type = (fname->dup.fa & FILE_ATTRIBUTE_DIRECTORY) ? DT_DIR : DT_REG;
+	/* NTFS: symlinks are "dir + reparse" or "file + reparse" */
+	if (fname->dup.fa & FILE_ATTRIBUTE_REPARSE_POINT)
+		dt_type = DT_LNK;
+	else
+		dt_type = (fname->dup.fa & FILE_ATTRIBUTE_DIRECTORY) ? DT_DIR : DT_REG;
 
 	return !dir_emit(ctx, (s8 *)name, name_len, ino, dt_type);
 }
-- 
2.42.0

[PATCH 5.15 089/128] fs/ntfs3: Avoid possible memory leak

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Su Hui <suhui@nfschina.com>

[ Upstream commit e4494770a5cad3c9d1d2a65ed15d07656c0d9b82 ]

smatch warn:
fs/ntfs3/fslog.c:2172 last_log_lsn() warn: possible memory leak of 'page_bufs'
Jump to label 'out' to free 'page_bufs' and is more consistent with
other code.

Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ntfs3/fslog.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/ntfs3/fslog.c b/fs/ntfs3/fslog.c
index 59f813cbdaa8e..8b95c06e5a4c5 100644
--- a/fs/ntfs3/fslog.c
+++ b/fs/ntfs3/fslog.c
@@ -2169,8 +2169,10 @@ static int last_log_lsn(struct ntfs_log *log)
 
 			if (!page) {
 				page = kmalloc(log->page_size, GFP_NOFS);
-				if (!page)
-					return -ENOMEM;
+				if (!page) {
+					err = -ENOMEM;
+					goto out;
+				}
 			}
 
 			/*
-- 
2.42.0

[PATCH 5.15 090/128] spi: npcm-fiu: Fix UMA reads when dummy.nbytes == 0

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: William A. Kennington III <william@wkennington.com>

[ Upstream commit 2ec8b010979036c2fe79a64adb6ecc0bd11e91d1 ]

We don't want to use the value of ilog2(0) as dummy.buswidth is 0 when
dummy.nbytes is 0. Since we have no dummy bytes, we don't need to
configure the dummy byte bits per clock register value anyway.

Signed-off-by: "William A. Kennington III" <william@wkennington.com>
Link: https://lore.kernel.org/r/20230922182812.2728066-1-william@wkennington.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-npcm-fiu.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-npcm-fiu.c b/drivers/spi/spi-npcm-fiu.c
index b62471ab6d7f2..1edaf22e265bf 100644
--- a/drivers/spi/spi-npcm-fiu.c
+++ b/drivers/spi/spi-npcm-fiu.c
@@ -334,8 +334,9 @@ static int npcm_fiu_uma_read(struct spi_mem *mem,
 		uma_cfg |= ilog2(op->cmd.buswidth);
 		uma_cfg |= ilog2(op->addr.buswidth)
 			<< NPCM_FIU_UMA_CFG_ADBPCK_SHIFT;
-		uma_cfg |= ilog2(op->dummy.buswidth)
-			<< NPCM_FIU_UMA_CFG_DBPCK_SHIFT;
+		if (op->dummy.nbytes)
+			uma_cfg |= ilog2(op->dummy.buswidth)
+				<< NPCM_FIU_UMA_CFG_DBPCK_SHIFT;
 		uma_cfg |= ilog2(op->data.buswidth)
 			<< NPCM_FIU_UMA_CFG_RDBPCK_SHIFT;
 		uma_cfg |= op->dummy.nbytes << NPCM_FIU_UMA_CFG_DBSIZ_SHIFT;
-- 
2.42.0

[PATCH 5.15 091/128] netfilter: nfnetlink_log: silence bogus compiler warning

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 2e1d175410972285333193837a4250a74cd472e6 ]

net/netfilter/nfnetlink_log.c:800:18: warning: variable 'ctinfo' is uninitialized

The warning is bogus, the variable is only used if ct is non-NULL and
always initialised in that case.  Init to 0 too to silence this.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309100514.ndBFebXN-lkp@intel.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nfnetlink_log.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c
index 7f83f9697fc14..09fe6cf358ec7 100644
--- a/net/netfilter/nfnetlink_log.c
+++ b/net/netfilter/nfnetlink_log.c
@@ -687,8 +687,8 @@ nfulnl_log_packet(struct net *net,
 	unsigned int plen = 0;
 	struct nfnl_log_net *log = nfnl_log_pernet(net);
 	const struct nfnl_ct_hook *nfnl_ct = NULL;
+	enum ip_conntrack_info ctinfo = 0;
 	struct nf_conn *ct = NULL;
-	enum ip_conntrack_info ctinfo;
 
 	if (li_user && li_user->type == NF_LOG_TYPE_ULOG)
 		li = li_user;
-- 
2.42.0

[PATCH 5.15 092/128] ASoC: rt5650: fix the wrong result of key button

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shuming Fan <shumingf@realtek.com>

[ Upstream commit f88dfbf333b3661faff996bb03af2024d907b76a ]

The RT5650 should enable a power setting for button detection to avoid the wrong result.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20231013094525.715518-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt5645.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c
index 8ea6d43335626..385f2cca939a0 100644
--- a/sound/soc/codecs/rt5645.c
+++ b/sound/soc/codecs/rt5645.c
@@ -3251,6 +3251,8 @@ int rt5645_set_jack_detect(struct snd_soc_component *component,
 				RT5645_GP1_PIN_IRQ, RT5645_GP1_PIN_IRQ);
 		regmap_update_bits(rt5645->regmap, RT5645_GEN_CTRL1,
 				RT5645_DIG_GATE_CTRL, RT5645_DIG_GATE_CTRL);
+		regmap_update_bits(rt5645->regmap, RT5645_DEPOP_M1,
+				RT5645_HP_CB_MASK, RT5645_HP_CB_PU);
 	}
 	rt5645_irq(0, rt5645);
 
-- 
2.42.0

[PATCH 5.15 093/128] drm/ttm: Reorder sys manager cleanup step

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Karolina Stolarek <karolina.stolarek@intel.com>

[ Upstream commit 3b401e30c249849d803de6c332dad2a595a58658 ]

With the current cleanup flow, we could trigger a NULL pointer
dereference if there is a delayed destruction of a BO with a
system resource that gets executed on drain_workqueue() call,
as we attempt to free a resource using an already released
resource manager.

Remove the device from the device list and drain its workqueue
before releasing the system domain manager in ttm_device_fini().

Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231016121525.2237838-1-karolina.stolarek@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/ttm/ttm_device.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/ttm/ttm_device.c b/drivers/gpu/drm/ttm/ttm_device.c
index 2df59b3c2ea16..291cdd893fc50 100644
--- a/drivers/gpu/drm/ttm/ttm_device.c
+++ b/drivers/gpu/drm/ttm/ttm_device.c
@@ -234,10 +234,6 @@ void ttm_device_fini(struct ttm_device *bdev)
 	struct ttm_resource_manager *man;
 	unsigned i;
 
-	man = ttm_manager_type(bdev, TTM_PL_SYSTEM);
-	ttm_resource_manager_set_used(man, false);
-	ttm_set_driver_manager(bdev, TTM_PL_SYSTEM, NULL);
-
 	mutex_lock(&ttm_global_mutex);
 	list_del(&bdev->device_list);
 	mutex_unlock(&ttm_global_mutex);
@@ -247,6 +243,10 @@ void ttm_device_fini(struct ttm_device *bdev)
 	if (ttm_bo_delayed_delete(bdev, true))
 		pr_debug("Delayed destroy list was clean\n");
 
+	man = ttm_manager_type(bdev, TTM_PL_SYSTEM);
+	ttm_resource_manager_set_used(man, false);
+	ttm_set_driver_manager(bdev, TTM_PL_SYSTEM, NULL);
+
 	spin_lock(&bdev->lru_lock);
 	for (i = 0; i < TTM_MAX_BO_PRIORITY; ++i)
 		if (list_empty(&man->lru[0]))
-- 
2.42.0

[PATCH 5.15 094/128] fbdev: uvesafb: Call cn_del_callback() at the end of uvesafb_exit()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jorge Maidana <jorgem.linux@gmail.com>

[ Upstream commit 1022e7e2f40574c74ed32c3811b03d26b0b81daf ]

Delete the v86d netlink only after all the VBE tasks have been
completed.

Fixes initial state restore on module unload:
uvesafb: VBE state restore call failed (eax=0x4f04, err=-19)

Signed-off-by: Jorge Maidana <jorgem.linux@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/uvesafb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/uvesafb.c b/drivers/video/fbdev/uvesafb.c
index 1f3b7e013568c..3a285af76f7ed 100644
--- a/drivers/video/fbdev/uvesafb.c
+++ b/drivers/video/fbdev/uvesafb.c
@@ -1935,10 +1935,10 @@ static void uvesafb_exit(void)
 		}
 	}
 
-	cn_del_callback(&uvesafb_cn_id);
 	driver_remove_file(&uvesafb_driver.driver, &driver_attr_v86d);
 	platform_device_unregister(uvesafb_device);
 	platform_driver_unregister(&uvesafb_driver);
+	cn_del_callback(&uvesafb_cn_id);
 }
 
 module_exit(uvesafb_exit);
-- 
2.42.0

[PATCH 5.15 095/128] scsi: mpt3sas: Fix in error path

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tomas Henzl <thenzl@redhat.com>

[ Upstream commit e40c04ade0e2f3916b78211d747317843b11ce10 ]

The driver should be deregistered as misc driver after PCI registration
failure.

Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20231015114529.10725-1-thenzl@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/mpt3sas/mpt3sas_scsih.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 9eb3d0b4891dd..c9f85605349bf 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -12899,8 +12899,10 @@ _mpt3sas_init(void)
 	mpt3sas_ctl_init(hbas_to_enumerate);
 
 	error = pci_register_driver(&mpt3sas_driver);
-	if (error)
+	if (error) {
+		mpt3sas_ctl_exit(hbas_to_enumerate);
 		scsih_exit();
+	}
 
 	return error;
 }
-- 
2.42.0

[PATCH 5.15 096/128] platform/mellanox: mlxbf-tmfifo: Fix a warning message

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Liming Sun <limings@nvidia.com>

[ Upstream commit 99c09c985e5973c8f0ad976ebae069548dd86f12 ]

This commit fixes the smatch static checker warning in function
mlxbf_tmfifo_rxtx_word() which complains data not initialized at
line 634 when IS_VRING_DROP() is TRUE.

Signed-off-by: Liming Sun <limings@nvidia.com>
Link: https://lore.kernel.org/r/20231012230235.219861-1-limings@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/mellanox/mlxbf-tmfifo.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/drivers/platform/mellanox/mlxbf-tmfifo.c b/drivers/platform/mellanox/mlxbf-tmfifo.c
index 194f3205e5597..767f4406e55f1 100644
--- a/drivers/platform/mellanox/mlxbf-tmfifo.c
+++ b/drivers/platform/mellanox/mlxbf-tmfifo.c
@@ -588,24 +588,25 @@ static void mlxbf_tmfifo_rxtx_word(struct mlxbf_tmfifo_vring *vring,
 
 	if (vring->cur_len + sizeof(u64) <= len) {
 		/* The whole word. */
-		if (!IS_VRING_DROP(vring)) {
-			if (is_rx)
+		if (is_rx) {
+			if (!IS_VRING_DROP(vring))
 				memcpy(addr + vring->cur_len, &data,
 				       sizeof(u64));
-			else
-				memcpy(&data, addr + vring->cur_len,
-				       sizeof(u64));
+		} else {
+			memcpy(&data, addr + vring->cur_len,
+			       sizeof(u64));
 		}
 		vring->cur_len += sizeof(u64);
 	} else {
 		/* Leftover bytes. */
-		if (!IS_VRING_DROP(vring)) {
-			if (is_rx)
+		if (is_rx) {
+			if (!IS_VRING_DROP(vring))
 				memcpy(addr + vring->cur_len, &data,
 				       len - vring->cur_len);
-			else
-				memcpy(&data, addr + vring->cur_len,
-				       len - vring->cur_len);
+		} else {
+			data = 0;
+			memcpy(&data, addr + vring->cur_len,
+			       len - vring->cur_len);
 		}
 		vring->cur_len = len;
 	}
-- 
2.42.0

[PATCH 5.15 097/128] net: chelsio: cxgb4: add an error code check in t4_load_phy_fw

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Su Hui <suhui@nfschina.com>

[ Upstream commit 9f771493da935299c6393ad3563b581255d01a37 ]

t4_set_params_timeout() can return -EINVAL if failed, add check
for this.

Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index b1c9f65ab10f6..c99f5920c957c 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -3816,6 +3816,8 @@ int t4_load_phy_fw(struct adapter *adap, int win,
 		 FW_PARAMS_PARAM_Z_V(FW_PARAMS_PARAM_DEV_PHYFW_DOWNLOAD));
 	ret = t4_set_params_timeout(adap, adap->mbox, adap->pf, 0, 1,
 				    &param, &val, 30000);
+	if (ret)
+		return ret;
 
 	/* If we have version number support, then check to see that the new
 	 * firmware got loaded properly.
-- 
2.42.0

[PATCH 5.15 098/128] r8152: Check for unplug in rtl_phy_patch_request()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit dc90ba37a8c37042407fa6970b9830890cfe6047 ]

If the adapter is unplugged while we're looping in
rtl_phy_patch_request() we could end up looping for 10 seconds (2 ms *
5000 loops). Add code similar to what's done in other places in the
driver to check for unplug and bail.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/r8152.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index f6d5fbb9dee07..15610d7d677ce 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -4051,6 +4051,9 @@ static int rtl_phy_patch_request(struct r8152 *tp, bool request, bool wait)
 	for (i = 0; wait && i < 5000; i++) {
 		u32 ocp_data;
 
+		if (test_bit(RTL8152_UNPLUG, &tp->flags))
+			break;
+
 		usleep_range(1000, 2000);
 		ocp_data = ocp_reg_read(tp, OCP_PHY_PATCH_STAT);
 		if ((ocp_data & PATCH_READY) ^ check)
-- 
2.42.0

[PATCH 5.15 099/128] r8152: Check for unplug in r8153b_ups_en() / r8153c_ups_en()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit bc65cc42af737a5a35f83842408ef2c6c79ba025 ]

If the adapter is unplugged while we're looping in r8153b_ups_en() /
r8153c_ups_en() we could end up looping for 10 seconds (20 ms * 500
loops). Add code similar to what's done in other places in the driver
to check for unplug and bail.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/r8152.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 15610d7d677ce..663e3880bf713 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -3648,6 +3648,8 @@ static void r8153b_ups_en(struct r8152 *tp, bool enable)
 			int i;
 
 			for (i = 0; i < 500; i++) {
+				if (test_bit(RTL8152_UNPLUG, &tp->flags))
+					return;
 				if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
 				    AUTOLOAD_DONE)
 					break;
@@ -3688,6 +3690,8 @@ static void r8153c_ups_en(struct r8152 *tp, bool enable)
 			int i;
 
 			for (i = 0; i < 500; i++) {
+				if (test_bit(RTL8152_UNPLUG, &tp->flags))
+					return;
 				if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
 				    AUTOLOAD_DONE)
 					break;
-- 
2.42.0

[PATCH 5.15 100/128] powerpc/mm: Fix boot crash with FLATMEM

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit daa9ada2093ed23d52b4c1fe6e13cf78f55cc85f ]

Erhard reported that his G5 was crashing with v6.6-rc kernels:

  mpic: Setting up HT PICs workarounds for U3/U4
  BUG: Unable to handle kernel data access at 0xfeffbb62ffec65fe
  Faulting instruction address: 0xc00000000005dc40
  Oops: Kernel access of bad area, sig: 11 [#1]
  BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
  Modules linked in:
  CPU: 0 PID: 0 Comm: swapper/0 Tainted: G                T  6.6.0-rc3-PMacGS #1
  Hardware name: PowerMac11,2 PPC970MP 0x440101 PowerMac
  NIP:  c00000000005dc40 LR: c000000000066660 CTR: c000000000007730
  REGS: c0000000022bf510 TRAP: 0380   Tainted: G                T (6.6.0-rc3-PMacGS)
  MSR:  9000000000001032 <SF,HV,ME,IR,DR,RI>  CR: 44004242  XER: 00000000
  IRQMASK: 3
  GPR00: 0000000000000000 c0000000022bf7b0 c0000000010c0b00 00000000000001ac
  GPR04: 0000000003c80000 0000000000000300 c0000000f20001ae 0000000000000300
  GPR08: 0000000000000006 feffbb62ffec65ff 0000000000000001 0000000000000000
  GPR12: 9000000000001032 c000000002362000 c000000000f76b80 000000000349ecd8
  GPR16: 0000000002367ba8 0000000002367f08 0000000000000006 0000000000000000
  GPR20: 00000000000001ac c000000000f6f920 c0000000022cd985 000000000000000c
  GPR24: 0000000000000300 00000003b0a3691d c0003e008030000e 0000000000000000
  GPR28: c00000000000000c c0000000f20001ee feffbb62ffec65fe 00000000000001ac
  NIP hash_page_do_lazy_icache+0x50/0x100
  LR  __hash_page_4K+0x420/0x590
  Call Trace:
    hash_page_mm+0x364/0x6f0
    do_hash_fault+0x114/0x2b0
    data_access_common_virt+0x198/0x1f0
  --- interrupt: 300 at mpic_init+0x4bc/0x10c4
  NIP:  c000000002020a5c LR: c000000002020a04 CTR: 0000000000000000
  REGS: c0000000022bf9f0 TRAP: 0300   Tainted: G                T (6.6.0-rc3-PMacGS)
  MSR:  9000000000001032 <SF,HV,ME,IR,DR,RI>  CR: 24004248  XER: 00000000
  DAR: c0003e008030000e DSISR: 40000000 IRQMASK: 1
  ...
  NIP mpic_init+0x4bc/0x10c4
  LR  mpic_init+0x464/0x10c4
  --- interrupt: 300
    pmac_setup_one_mpic+0x258/0x2dc
    pmac_pic_init+0x28c/0x3d8
    init_IRQ+0x90/0x140
    start_kernel+0x57c/0x78c
    start_here_common+0x1c/0x20

A bisect pointed to the breakage beginning with commit 9fee28baa601 ("powerpc:
implement the new page table range API").

Analysis of the oops pointed to a struct page with a corrupted
compound_head being loaded via page_folio() -> _compound_head() in
hash_page_do_lazy_icache().

The access by the mpic code is to an MMIO address, so the expectation
is that the struct page for that address would be initialised by
init_unavailable_range(), as pointed out by Aneesh.

Instrumentation showed that was not the case, which eventually lead to
the realisation that pfn_valid() was returning false for that address,
causing the struct page to not be initialised.

Because the system is using FLATMEM, the version of pfn_valid() in
memory_model.h is used:

static inline int pfn_valid(unsigned long pfn)
{
	...
	return pfn >= pfn_offset && (pfn - pfn_offset) < max_mapnr;
}

Which relies on max_mapnr being initialised. Early in boot max_mapnr is
zero meaning no PFNs are valid.

max_mapnr is initialised in mem_init() called via:

  start_kernel()
    mm_core_init()  # init/main.c:928
      mem_init()

But that is too late for the usage in init_unavailable_range() called via:

  start_kernel()
    setup_arch()    # init/main.c:893
      paging_init()
        free_area_init()
          init_unavailable_range()

Although max_mapnr is currently set in mem_init(), the value is actually
already available much earlier, as soon as mem_topology_setup() has
completed, which is also before paging_init() is called. So move the
initialisation there, which causes paging_init() to correctly initialise
the struct page and fixes the bug.

This bug seems to have been lurking for years, but went unnoticed
because the pre-folio code was inspecting the uninitialised page->flags
but not dereferencing it.

Thanks to Erhard and Aneesh for help debugging.

Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Closes: https://lore.kernel.org/all/20230929132750.3cd98452@yea/
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231023112500.1550208-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/setup-common.c | 2 ++
 arch/powerpc/mm/mem.c              | 1 -
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index b1e43b69a559d..42338e2921d64 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -887,6 +887,8 @@ void __init setup_arch(char **cmdline_p)
 
 	/* Parse memory topology */
 	mem_topology_setup();
+	/* Set max_mapnr before paging_init() */
+	set_max_mapnr(max_pfn);
 
 	/*
 	 * Release secondary cpus out of their spinloops at 0x60 now that
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 6902f453c7451..01fc77564cac1 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -288,7 +288,6 @@ void __init mem_init(void)
 #endif
 
 	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
-	set_max_mapnr(max_pfn);
 
 	kasan_late_init();
 
-- 
2.42.0

[PATCH 5.15 101/128] perf evlist: Add evlist__add_dummy_on_all_cpus()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Adrian Hunter <adrian.hunter@intel.com>

[ Upstream commit 126d68fdcabed8c2ca5ffaba785add93ef722da8 ]

Add evlist__add_dummy_on_all_cpus() to enable creating a system-wide dummy
event that sets up the system-wide maps before map propagation.

For convenience, add evlist__add_aux_dummy() so that the logic can be used
whether or not the event needs to be system-wide.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Link: https://lore.kernel.org/r/20220524075436.29144-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: f9cdeb58a9cf ("perf evlist: Avoid frequency mode for the dummy event")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/evlist.c | 45 ++++++++++++++++++++++++++++++++++++++++
 tools/perf/util/evlist.h |  5 +++++
 2 files changed, 50 insertions(+)

diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c
index 39d294f6c3218..a75cdcf381308 100644
--- a/tools/perf/util/evlist.c
+++ b/tools/perf/util/evlist.c
@@ -258,6 +258,51 @@ int evlist__add_dummy(struct evlist *evlist)
 	return 0;
 }
 
+static void evlist__add_on_all_cpus(struct evlist *evlist, struct evsel *evsel)
+{
+	evsel->core.system_wide = true;
+
+	/*
+	 * All CPUs.
+	 *
+	 * Note perf_event_open() does not accept CPUs that are not online, so
+	 * in fact this CPU list will include only all online CPUs.
+	 */
+	perf_cpu_map__put(evsel->core.own_cpus);
+	evsel->core.own_cpus = perf_cpu_map__new(NULL);
+	perf_cpu_map__put(evsel->core.cpus);
+	evsel->core.cpus = perf_cpu_map__get(evsel->core.own_cpus);
+
+	/* No threads */
+	perf_thread_map__put(evsel->core.threads);
+	evsel->core.threads = perf_thread_map__new_dummy();
+
+	evlist__add(evlist, evsel);
+}
+
+struct evsel *evlist__add_aux_dummy(struct evlist *evlist, bool system_wide)
+{
+	struct evsel *evsel = evlist__dummy_event(evlist);
+
+	if (!evsel)
+		return NULL;
+
+	evsel->core.attr.exclude_kernel = 1;
+	evsel->core.attr.exclude_guest = 1;
+	evsel->core.attr.exclude_hv = 1;
+	evsel->core.attr.freq = 0;
+	evsel->core.attr.sample_period = 1;
+	evsel->no_aux_samples = true;
+	evsel->name = strdup("dummy:u");
+
+	if (system_wide)
+		evlist__add_on_all_cpus(evlist, evsel);
+	else
+		evlist__add(evlist, evsel);
+
+	return evsel;
+}
+
 static int evlist__add_attrs(struct evlist *evlist, struct perf_event_attr *attrs, size_t nr_attrs)
 {
 	struct evsel *evsel, *n;
diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h
index ec177f783ee67..decf5c944adba 100644
--- a/tools/perf/util/evlist.h
+++ b/tools/perf/util/evlist.h
@@ -112,6 +112,11 @@ int __evlist__add_default_attrs(struct evlist *evlist,
 int arch_evlist__add_default_attrs(struct evlist *evlist);
 
 int evlist__add_dummy(struct evlist *evlist);
+struct evsel *evlist__add_aux_dummy(struct evlist *evlist, bool system_wide);
+static inline struct evsel *evlist__add_dummy_on_all_cpus(struct evlist *evlist)
+{
+	return evlist__add_aux_dummy(evlist, true);
+}
 
 int evlist__add_sb_event(struct evlist *evlist, struct perf_event_attr *attr,
 			 evsel__sb_cb_t cb, void *data);
-- 
2.42.0

[PATCH 5.15 102/128] perf tools: Get rid of evlist__add_on_all_cpus()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Namhyung Kim <namhyung@kernel.org>

[ Upstream commit 60ea006f72512fd7c36f16cdbe91f4fc284f8115 ]

The cpu and thread maps are properly handled in libperf now.  No need to
do it in the perf tools anymore.  Let's remove the logic.

Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221003204647.1481128-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: f9cdeb58a9cf ("perf evlist: Avoid frequency mode for the dummy event")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/evlist.c | 29 ++---------------------------
 1 file changed, 2 insertions(+), 27 deletions(-)

diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c
index a75cdcf381308..63ef40543a9fe 100644
--- a/tools/perf/util/evlist.c
+++ b/tools/perf/util/evlist.c
@@ -258,28 +258,6 @@ int evlist__add_dummy(struct evlist *evlist)
 	return 0;
 }
 
-static void evlist__add_on_all_cpus(struct evlist *evlist, struct evsel *evsel)
-{
-	evsel->core.system_wide = true;
-
-	/*
-	 * All CPUs.
-	 *
-	 * Note perf_event_open() does not accept CPUs that are not online, so
-	 * in fact this CPU list will include only all online CPUs.
-	 */
-	perf_cpu_map__put(evsel->core.own_cpus);
-	evsel->core.own_cpus = perf_cpu_map__new(NULL);
-	perf_cpu_map__put(evsel->core.cpus);
-	evsel->core.cpus = perf_cpu_map__get(evsel->core.own_cpus);
-
-	/* No threads */
-	perf_thread_map__put(evsel->core.threads);
-	evsel->core.threads = perf_thread_map__new_dummy();
-
-	evlist__add(evlist, evsel);
-}
-
 struct evsel *evlist__add_aux_dummy(struct evlist *evlist, bool system_wide)
 {
 	struct evsel *evsel = evlist__dummy_event(evlist);
@@ -292,14 +270,11 @@ struct evsel *evlist__add_aux_dummy(struct evlist *evlist, bool system_wide)
 	evsel->core.attr.exclude_hv = 1;
 	evsel->core.attr.freq = 0;
 	evsel->core.attr.sample_period = 1;
+	evsel->core.system_wide = system_wide;
 	evsel->no_aux_samples = true;
 	evsel->name = strdup("dummy:u");
 
-	if (system_wide)
-		evlist__add_on_all_cpus(evlist, evsel);
-	else
-		evlist__add(evlist, evsel);
-
+	evlist__add(evlist, evsel);
 	return evsel;
 }
 
-- 
2.42.0

[PATCH 5.15 103/128] perf evlist: Avoid frequency mode for the dummy event

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ian Rogers <irogers@google.com>

[ Upstream commit f9cdeb58a9cf46c09b56f5f661ea8da24b6458c3 ]

Dummy events are created with an attribute where the period and freq
are zero. evsel__config will then see the uninitialized values and
initialize them in evsel__default_freq_period. As fequency mode is
used by default the dummy event would be set to use frequency
mode. However, this has no effect on the dummy event but does cause
unnecessary timers/interrupts. Avoid this overhead by setting the
period to 1 for dummy events.

evlist__add_aux_dummy calls evlist__add_dummy then sets freq=0 and
period=1. This isn't necessary after this change and so the setting is
removed.

>From Stephane:

The dummy event is not counting anything. It is used to collect mmap
records and avoid a race condition during the synthesize mmap phase of
perf record. As such, it should not cause any overhead during active
profiling. Yet, it did. Because of a bug the dummy event was
programmed as a sampling event in frequency mode. Events in that mode
incur more kernel overheads because on timer tick, the kernel has to
look at the number of samples for each event and potentially adjust
the sampling period to achieve the desired frequency. The dummy event
was therefore adding a frequency event to task and ctx contexts we may
otherwise not have any, e.g.,

  perf record -a -e cpu/event=0x3c,period=10000000/.

On each timer tick the perf_adjust_freq_unthr_context() is invoked and
if ctx->nr_freq is non-zero, then the kernel will loop over ALL the
events of the context looking for frequency mode ones. In doing, so it
locks the context, and enable/disable the PMU of each hw event. If all
the events of the context are in period mode, the kernel will have to
traverse the list for nothing incurring overhead. The overhead is
multiplied by a very large factor when this happens in a guest kernel.
There is no need for the dummy event to be in frequency mode, it does
not count anything and therefore should not cause extra overhead for
no reason.

Fixes: 5bae0250237f ("perf evlist: Introduce perf_evlist__new_dummy constructor")
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230916035640.1074422-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/evlist.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c
index 63ef40543a9fe..9d0f2feb25671 100644
--- a/tools/perf/util/evlist.c
+++ b/tools/perf/util/evlist.c
@@ -248,6 +248,9 @@ int evlist__add_dummy(struct evlist *evlist)
 		.type	= PERF_TYPE_SOFTWARE,
 		.config = PERF_COUNT_SW_DUMMY,
 		.size	= sizeof(attr), /* to capture ABI version */
+		/* Avoid frequency mode for dummy events to avoid associated timers. */
+		.freq = 0,
+		.sample_period = 1,
 	};
 	struct evsel *evsel = evsel__new_idx(&attr, evlist->core.nr_entries);
 
@@ -268,8 +271,6 @@ struct evsel *evlist__add_aux_dummy(struct evlist *evlist, bool system_wide)
 	evsel->core.attr.exclude_kernel = 1;
 	evsel->core.attr.exclude_guest = 1;
 	evsel->core.attr.exclude_hv = 1;
-	evsel->core.attr.freq = 0;
-	evsel->core.attr.sample_period = 1;
 	evsel->core.system_wide = system_wide;
 	evsel->no_aux_samples = true;
 	evsel->name = strdup("dummy:u");
-- 
2.42.0

[PATCH 5.15 104/128] can: isotp: set max PDU size to 64 kByte

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oliver Hartkopp <socketcan@hartkopp.net>

commit 9c0c191d82a1de964ac953a1df8b5744ec670b07 upstream

The reason to extend the max PDU size from 4095 Byte (12 bit length value)
to a 32 bit value (up to 4 GByte) was to be able to flash 64 kByte
bootloaders with a single ISO-TP PDU. The max PDU size in the Linux kernel
implementation was set to 8200 Bytes to be able to test the length
information escape sequence.

It turns out that the demand for 64 kByte PDUs is real so the value for
MAX_MSG_LENGTH is set to 66000 to be able to potentially add some checksums
to the 65.536 Byte block.

Link: https://github.com/linux-can/can-utils/issues/347#issuecomment-1056142301
Link: https://lore.kernel.org/all/20220309120416.83514-3-socketcan@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/can/isotp.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/net/can/isotp.c
+++ b/net/can/isotp.c
@@ -87,9 +87,9 @@ MODULE_ALIAS("can-proto-6");
 /* ISO 15765-2:2016 supports more than 4095 byte per ISO PDU as the FF_DL can
  * take full 32 bit values (4 Gbyte). We would need some good concept to handle
  * this between user space and kernel space. For now increase the static buffer
- * to something about 8 kbyte to be able to test this new functionality.
+ * to something about 64 kbyte to be able to test this new functionality.
  */
-#define MAX_MSG_LENGTH 8200
+#define MAX_MSG_LENGTH 66000
 
 /* N_PCI type values in bits 7-4 of N_PCI bytes */
 #define N_PCI_SF 0x00	/* single frame */

[PATCH 5.15 105/128] can: isotp: isotp_bind(): return -EINVAL on incorrect CAN ID formatting

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oliver Hartkopp <socketcan@hartkopp.net>

commit 2aa39889c463195a0dfe2aff9fad413139c32a4f upstream

Commit 3ea566422cbd ("can: isotp: sanitize CAN ID checks in
isotp_bind()") checks the given CAN ID address information by
sanitizing the input values.

This check (silently) removes obsolete bits by masking the given CAN
IDs.

Derek Will suggested to give a feedback to the application programmer
when the 'sanitizing' was actually needed which means the programmer
provided CAN ID content in a wrong format (e.g. SFF CAN IDs with a CAN
ID > 0x7FF).

Link: https://lore.kernel.org/all/20220515181633.76671-1-socketcan@hartkopp.net
Suggested-by: Derek Will <derekrobertwill@gmail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/can/isotp.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/net/can/isotp.c
+++ b/net/can/isotp.c
@@ -1142,6 +1142,11 @@ static int isotp_bind(struct socket *soc
 	else
 		rx_id &= CAN_SFF_MASK;
 
+	/* give feedback on wrong CAN-ID values */
+	if (tx_id != addr->can_addr.tp.tx_id ||
+	    rx_id != addr->can_addr.tp.rx_id)
+		return -EINVAL;
+
 	if (!addr->can_ifindex)
 		return -ENODEV;
 

[PATCH 5.15 106/128] can: isotp: check CAN address family in isotp_bind()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oliver Hartkopp <socketcan@hartkopp.net>

commit c6adf659a8ba85913e16a571d5a9bcd17d3d1234 upstream

Add missing check to block non-AF_CAN binds.

Syzbot created some code which matched the right sockaddr struct size
but used AF_XDP (0x2C) instead of AF_CAN (0x1D) in the address family
field:

bind$xdp(r2, &(0x7f0000000540)={0x2c, 0x0, r4, 0x0, r2}, 0x10)
                                ^^^^
This has no funtional impact but the userspace should be notified about
the wrong address family field content.

Link: https://syzkaller.appspot.com/text?tag=CrashLog&x=11ff9d8c480000
Reported-by: syzbot+5aed6c3aaba661f5b917@syzkaller.appspotmail.com
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230104201844.13168-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/can/isotp.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/net/can/isotp.c
+++ b/net/can/isotp.c
@@ -1129,6 +1129,9 @@ static int isotp_bind(struct socket *soc
 	if (len < ISOTP_MIN_NAMELEN)
 		return -EINVAL;
 
+	if (addr->can_family != AF_CAN)
+		return -EINVAL;
+
 	/* sanitize tx/rx CAN identifiers */
 	tx_id = addr->can_addr.tp.tx_id;
 	if (tx_id & CAN_EFF_FLAG)

[PATCH 5.15 107/128] can: isotp: handle wait_event_interruptible() return values

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oliver Hartkopp <socketcan@hartkopp.net>

commit 823b2e42720f96f277940c37ea438b7c5ead51a4 upstream

When wait_event_interruptible() has been interrupted by a signal the
tx.state value might not be ISOTP_IDLE. Force the state machines
into idle state to inhibit the timer handlers to continue working.

Fixes: 866337865f37 ("can: isotp: fix tx state handling for echo tx processing")
Cc: stable@vger.kernel.org
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230112192347.1944-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/can/isotp.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/net/can/isotp.c
+++ b/net/can/isotp.c
@@ -1071,6 +1071,10 @@ static int isotp_release(struct socket *
 	/* wait for complete transmission of current pdu */
 	wait_event_interruptible(so->wait, so->tx.state == ISOTP_IDLE);
 
+	/* force state machines to be idle also when a signal occurred */
+	so->tx.state = ISOTP_IDLE;
+	so->rx.state = ISOTP_IDLE;
+
 	spin_lock(&isotp_notifier_lock);
 	while (isotp_busy_notifier == so) {
 		spin_unlock(&isotp_notifier_lock);

[PATCH 5.15 108/128] can: isotp: add local echo tx processing and tx without FC

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oliver Hartkopp <socketcan@hartkopp.net>

commit 4b7fe92c06901f4563af0e36d25223a5ab343782 upstream
commit 9f39d36530e5678d092d53c5c2c60d82b4dcc169 upstream
commit 051737439eaee5bdd03d3c2ef5510d54a478fd05 upstream

Due to the existing patch order applied to isotp.c in the stable kernel the
original order of depending patches the three original patches
4b7fe92c0690 ("can: isotp: add local echo tx processing for consecutive frames")
9f39d36530e5 ("can: isotp: add support for transmission without flow control")
051737439eae ("can: isotp: fix race between isotp_sendsmg() and isotp_release()")
can not be split into different patches that can be applied in working steps
to the stable tree.

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/uapi/linux/can/isotp.h |   25 +-
 net/can/isotp.c                |  406 ++++++++++++++++++++++++++---------------
 2 files changed, 271 insertions(+), 160 deletions(-)

--- a/include/uapi/linux/can/isotp.h
+++ b/include/uapi/linux/can/isotp.h
@@ -124,18 +124,19 @@ struct can_isotp_ll_options {
 
 /* flags for isotp behaviour */
 
-#define CAN_ISOTP_LISTEN_MODE	0x001	/* listen only (do not send FC) */
-#define CAN_ISOTP_EXTEND_ADDR	0x002	/* enable extended addressing */
-#define CAN_ISOTP_TX_PADDING	0x004	/* enable CAN frame padding tx path */
-#define CAN_ISOTP_RX_PADDING	0x008	/* enable CAN frame padding rx path */
-#define CAN_ISOTP_CHK_PAD_LEN	0x010	/* check received CAN frame padding */
-#define CAN_ISOTP_CHK_PAD_DATA	0x020	/* check received CAN frame padding */
-#define CAN_ISOTP_HALF_DUPLEX	0x040	/* half duplex error state handling */
-#define CAN_ISOTP_FORCE_TXSTMIN	0x080	/* ignore stmin from received FC */
-#define CAN_ISOTP_FORCE_RXSTMIN	0x100	/* ignore CFs depending on rx stmin */
-#define CAN_ISOTP_RX_EXT_ADDR	0x200	/* different rx extended addressing */
-#define CAN_ISOTP_WAIT_TX_DONE	0x400	/* wait for tx completion */
-#define CAN_ISOTP_SF_BROADCAST	0x800	/* 1-to-N functional addressing */
+#define CAN_ISOTP_LISTEN_MODE	0x0001	/* listen only (do not send FC) */
+#define CAN_ISOTP_EXTEND_ADDR	0x0002	/* enable extended addressing */
+#define CAN_ISOTP_TX_PADDING	0x0004	/* enable CAN frame padding tx path */
+#define CAN_ISOTP_RX_PADDING	0x0008	/* enable CAN frame padding rx path */
+#define CAN_ISOTP_CHK_PAD_LEN	0x0010	/* check received CAN frame padding */
+#define CAN_ISOTP_CHK_PAD_DATA	0x0020	/* check received CAN frame padding */
+#define CAN_ISOTP_HALF_DUPLEX	0x0040	/* half duplex error state handling */
+#define CAN_ISOTP_FORCE_TXSTMIN	0x0080	/* ignore stmin from received FC */
+#define CAN_ISOTP_FORCE_RXSTMIN	0x0100	/* ignore CFs depending on rx stmin */
+#define CAN_ISOTP_RX_EXT_ADDR	0x0200	/* different rx extended addressing */
+#define CAN_ISOTP_WAIT_TX_DONE	0x0400	/* wait for tx completion */
+#define CAN_ISOTP_SF_BROADCAST	0x0800	/* 1-to-N functional addressing */
+#define CAN_ISOTP_CF_BROADCAST	0x1000	/* 1-to-N transmission w/o FC */
 
 /* protocol machine default values */
 
--- a/net/can/isotp.c
+++ b/net/can/isotp.c
@@ -14,7 +14,6 @@
  * - use CAN_ISOTP_WAIT_TX_DONE flag to block the caller until the PDU is sent
  * - as we have static buffers the check whether the PDU fits into the buffer
  *   is done at FF reception time (no support for sending 'wait frames')
- * - take care of the tx-queue-len as traffic shaping is still on the TODO list
  *
  * Copyright (c) 2020 Volkswagen Group Electronic Research
  * All rights reserved.
@@ -105,18 +104,23 @@ MODULE_ALIAS("can-proto-6");
 #define FC_CONTENT_SZ 3	/* flow control content size in byte (FS/BS/STmin) */
 
 #define ISOTP_CHECK_PADDING (CAN_ISOTP_CHK_PAD_LEN | CAN_ISOTP_CHK_PAD_DATA)
+#define ISOTP_ALL_BC_FLAGS (CAN_ISOTP_SF_BROADCAST | CAN_ISOTP_CF_BROADCAST)
 
 /* Flow Status given in FC frame */
 #define ISOTP_FC_CTS 0		/* clear to send */
 #define ISOTP_FC_WT 1		/* wait */
 #define ISOTP_FC_OVFLW 2	/* overflow */
 
+#define ISOTP_FC_TIMEOUT 1	/* 1 sec */
+#define ISOTP_ECHO_TIMEOUT 2	/* 2 secs */
+
 enum {
 	ISOTP_IDLE = 0,
 	ISOTP_WAIT_FIRST_FC,
 	ISOTP_WAIT_FC,
 	ISOTP_WAIT_DATA,
-	ISOTP_SENDING
+	ISOTP_SENDING,
+	ISOTP_SHUTDOWN,
 };
 
 struct tpcon {
@@ -137,13 +141,14 @@ struct isotp_sock {
 	canid_t rxid;
 	ktime_t tx_gap;
 	ktime_t lastrxcf_tstamp;
-	struct hrtimer rxtimer, txtimer;
+	struct hrtimer rxtimer, txtimer, txfrtimer;
 	struct can_isotp_options opt;
 	struct can_isotp_fc_options rxfc, txfc;
 	struct can_isotp_ll_options ll;
 	u32 frame_txtime;
 	u32 force_tx_stmin;
 	u32 force_rx_stmin;
+	u32 cfecho; /* consecutive frame echo tag */
 	struct tpcon rx, tx;
 	struct list_head notifier;
 	wait_queue_head_t wait;
@@ -159,6 +164,17 @@ static inline struct isotp_sock *isotp_s
 	return (struct isotp_sock *)sk;
 }
 
+static u32 isotp_bc_flags(struct isotp_sock *so)
+{
+	return so->opt.flags & ISOTP_ALL_BC_FLAGS;
+}
+
+static bool isotp_register_rxid(struct isotp_sock *so)
+{
+	/* no broadcast modes => register rx_id for FC frame reception */
+	return (isotp_bc_flags(so) == 0);
+}
+
 static enum hrtimer_restart isotp_rx_timer_handler(struct hrtimer *hrtimer)
 {
 	struct isotp_sock *so = container_of(hrtimer, struct isotp_sock,
@@ -240,7 +256,8 @@ static int isotp_send_fc(struct sock *sk
 	so->lastrxcf_tstamp = ktime_set(0, 0);
 
 	/* start rx timeout watchdog */
-	hrtimer_start(&so->rxtimer, ktime_set(1, 0), HRTIMER_MODE_REL_SOFT);
+	hrtimer_start(&so->rxtimer, ktime_set(ISOTP_FC_TIMEOUT, 0),
+		      HRTIMER_MODE_REL_SOFT);
 	return 0;
 }
 
@@ -326,6 +343,8 @@ static int check_pad(struct isotp_sock *
 	return 0;
 }
 
+static void isotp_send_cframe(struct isotp_sock *so);
+
 static int isotp_rcv_fc(struct isotp_sock *so, struct canfd_frame *cf, int ae)
 {
 	struct sock *sk = &so->sk;
@@ -380,14 +399,15 @@ static int isotp_rcv_fc(struct isotp_soc
 	case ISOTP_FC_CTS:
 		so->tx.bs = 0;
 		so->tx.state = ISOTP_SENDING;
-		/* start cyclic timer for sending CF frame */
-		hrtimer_start(&so->txtimer, so->tx_gap,
+		/* send CF frame and enable echo timeout handling */
+		hrtimer_start(&so->txtimer, ktime_set(ISOTP_ECHO_TIMEOUT, 0),
 			      HRTIMER_MODE_REL_SOFT);
+		isotp_send_cframe(so);
 		break;
 
 	case ISOTP_FC_WT:
 		/* start timer to wait for next FC frame */
-		hrtimer_start(&so->txtimer, ktime_set(1, 0),
+		hrtimer_start(&so->txtimer, ktime_set(ISOTP_FC_TIMEOUT, 0),
 			      HRTIMER_MODE_REL_SOFT);
 		break;
 
@@ -582,7 +602,7 @@ static int isotp_rcv_cf(struct sock *sk,
 	/* perform blocksize handling, if enabled */
 	if (!so->rxfc.bs || ++so->rx.bs < so->rxfc.bs) {
 		/* start rx timeout watchdog */
-		hrtimer_start(&so->rxtimer, ktime_set(1, 0),
+		hrtimer_start(&so->rxtimer, ktime_set(ISOTP_FC_TIMEOUT, 0),
 			      HRTIMER_MODE_REL_SOFT);
 		return 0;
 	}
@@ -713,6 +733,63 @@ static void isotp_fill_dataframe(struct
 		cf->data[0] = so->opt.ext_address;
 }
 
+static void isotp_send_cframe(struct isotp_sock *so)
+{
+	struct sock *sk = &so->sk;
+	struct sk_buff *skb;
+	struct net_device *dev;
+	struct canfd_frame *cf;
+	int can_send_ret;
+	int ae = (so->opt.flags & CAN_ISOTP_EXTEND_ADDR) ? 1 : 0;
+
+	dev = dev_get_by_index(sock_net(sk), so->ifindex);
+	if (!dev)
+		return;
+
+	skb = alloc_skb(so->ll.mtu + sizeof(struct can_skb_priv), GFP_ATOMIC);
+	if (!skb) {
+		dev_put(dev);
+		return;
+	}
+
+	can_skb_reserve(skb);
+	can_skb_prv(skb)->ifindex = dev->ifindex;
+	can_skb_prv(skb)->skbcnt = 0;
+
+	cf = (struct canfd_frame *)skb->data;
+	skb_put_zero(skb, so->ll.mtu);
+
+	/* create consecutive frame */
+	isotp_fill_dataframe(cf, so, ae, 0);
+
+	/* place consecutive frame N_PCI in appropriate index */
+	cf->data[ae] = N_PCI_CF | so->tx.sn++;
+	so->tx.sn %= 16;
+	so->tx.bs++;
+
+	cf->flags = so->ll.tx_flags;
+
+	skb->dev = dev;
+	can_skb_set_owner(skb, sk);
+
+	/* cfecho should have been zero'ed by init/isotp_rcv_echo() */
+	if (so->cfecho)
+		pr_notice_once("can-isotp: cfecho is %08X != 0\n", so->cfecho);
+
+	/* set consecutive frame echo tag */
+	so->cfecho = *(u32 *)cf->data;
+
+	/* send frame with local echo enabled */
+	can_send_ret = can_send(skb, 1);
+	if (can_send_ret) {
+		pr_notice_once("can-isotp: %s: can_send_ret %pe\n",
+			       __func__, ERR_PTR(can_send_ret));
+		if (can_send_ret == -ENOBUFS)
+			pr_notice_once("can-isotp: tx queue is full\n");
+	}
+	dev_put(dev);
+}
+
 static void isotp_create_fframe(struct canfd_frame *cf, struct isotp_sock *so,
 				int ae)
 {
@@ -746,145 +823,123 @@ static void isotp_create_fframe(struct c
 		cf->data[i] = so->tx.buf[so->tx.idx++];
 
 	so->tx.sn = 1;
-	so->tx.state = ISOTP_WAIT_FIRST_FC;
 }
 
-static enum hrtimer_restart isotp_tx_timer_handler(struct hrtimer *hrtimer)
+static void isotp_rcv_echo(struct sk_buff *skb, void *data)
 {
-	struct isotp_sock *so = container_of(hrtimer, struct isotp_sock,
-					     txtimer);
-	struct sock *sk = &so->sk;
-	struct sk_buff *skb;
-	struct net_device *dev;
-	struct canfd_frame *cf;
-	enum hrtimer_restart restart = HRTIMER_NORESTART;
-	int can_send_ret;
-	int ae = (so->opt.flags & CAN_ISOTP_EXTEND_ADDR) ? 1 : 0;
+	struct sock *sk = (struct sock *)data;
+	struct isotp_sock *so = isotp_sk(sk);
+	struct canfd_frame *cf = (struct canfd_frame *)skb->data;
 
-	switch (so->tx.state) {
-	case ISOTP_WAIT_FC:
-	case ISOTP_WAIT_FIRST_FC:
+	/* only handle my own local echo CF/SF skb's (no FF!) */
+	if (skb->sk != sk || so->cfecho != *(u32 *)cf->data)
+		return;
 
-		/* we did not get any flow control frame in time */
+	/* cancel local echo timeout */
+	hrtimer_cancel(&so->txtimer);
 
-		/* report 'communication error on send' */
-		sk->sk_err = ECOMM;
-		if (!sock_flag(sk, SOCK_DEAD))
-			sk_error_report(sk);
+	/* local echo skb with consecutive frame has been consumed */
+	so->cfecho = 0;
 
-		/* reset tx state */
+	if (so->tx.idx >= so->tx.len) {
+		/* we are done */
 		so->tx.state = ISOTP_IDLE;
 		wake_up_interruptible(&so->wait);
-		break;
+		return;
+	}
 
-	case ISOTP_SENDING:
+	if (so->txfc.bs && so->tx.bs >= so->txfc.bs) {
+		/* stop and wait for FC with timeout */
+		so->tx.state = ISOTP_WAIT_FC;
+		hrtimer_start(&so->txtimer, ktime_set(ISOTP_FC_TIMEOUT, 0),
+			      HRTIMER_MODE_REL_SOFT);
+		return;
+	}
 
-		/* push out the next segmented pdu */
-		dev = dev_get_by_index(sock_net(sk), so->ifindex);
-		if (!dev)
-			break;
+	/* no gap between data frames needed => use burst mode */
+	if (!so->tx_gap) {
+		/* enable echo timeout handling */
+		hrtimer_start(&so->txtimer, ktime_set(ISOTP_ECHO_TIMEOUT, 0),
+			      HRTIMER_MODE_REL_SOFT);
+		isotp_send_cframe(so);
+		return;
+	}
 
-isotp_tx_burst:
-		skb = alloc_skb(so->ll.mtu + sizeof(struct can_skb_priv),
-				GFP_ATOMIC);
-		if (!skb) {
-			dev_put(dev);
-			break;
-		}
+	/* start timer to send next consecutive frame with correct delay */
+	hrtimer_start(&so->txfrtimer, so->tx_gap, HRTIMER_MODE_REL_SOFT);
+}
 
-		can_skb_reserve(skb);
-		can_skb_prv(skb)->ifindex = dev->ifindex;
-		can_skb_prv(skb)->skbcnt = 0;
-
-		cf = (struct canfd_frame *)skb->data;
-		skb_put_zero(skb, so->ll.mtu);
-
-		/* create consecutive frame */
-		isotp_fill_dataframe(cf, so, ae, 0);
-
-		/* place consecutive frame N_PCI in appropriate index */
-		cf->data[ae] = N_PCI_CF | so->tx.sn++;
-		so->tx.sn %= 16;
-		so->tx.bs++;
-
-		cf->flags = so->ll.tx_flags;
-
-		skb->dev = dev;
-		can_skb_set_owner(skb, sk);
-
-		can_send_ret = can_send(skb, 1);
-		if (can_send_ret) {
-			pr_notice_once("can-isotp: %s: can_send_ret %pe\n",
-				       __func__, ERR_PTR(can_send_ret));
-			if (can_send_ret == -ENOBUFS)
-				pr_notice_once("can-isotp: tx queue is full, increasing txqueuelen may prevent this error\n");
-		}
-		if (so->tx.idx >= so->tx.len) {
-			/* we are done */
-			so->tx.state = ISOTP_IDLE;
-			dev_put(dev);
-			wake_up_interruptible(&so->wait);
-			break;
-		}
+static enum hrtimer_restart isotp_tx_timer_handler(struct hrtimer *hrtimer)
+{
+	struct isotp_sock *so = container_of(hrtimer, struct isotp_sock,
+					     txtimer);
+	struct sock *sk = &so->sk;
 
-		if (so->txfc.bs && so->tx.bs >= so->txfc.bs) {
-			/* stop and wait for FC */
-			so->tx.state = ISOTP_WAIT_FC;
-			dev_put(dev);
-			hrtimer_set_expires(&so->txtimer,
-					    ktime_add(ktime_get(),
-						      ktime_set(1, 0)));
-			restart = HRTIMER_RESTART;
-			break;
-		}
+	/* don't handle timeouts in IDLE or SHUTDOWN state */
+	if (so->tx.state == ISOTP_IDLE || so->tx.state == ISOTP_SHUTDOWN)
+		return HRTIMER_NORESTART;
+
+	/* we did not get any flow control or echo frame in time */
+
+	/* report 'communication error on send' */
+	sk->sk_err = ECOMM;
+	if (!sock_flag(sk, SOCK_DEAD))
+		sk_error_report(sk);
 
-		/* no gap between data frames needed => use burst mode */
-		if (!so->tx_gap)
-			goto isotp_tx_burst;
+	/* reset tx state */
+	so->tx.state = ISOTP_IDLE;
+	wake_up_interruptible(&so->wait);
 
-		/* start timer to send next data frame with correct delay */
-		dev_put(dev);
-		hrtimer_set_expires(&so->txtimer,
-				    ktime_add(ktime_get(), so->tx_gap));
-		restart = HRTIMER_RESTART;
-		break;
+	return HRTIMER_NORESTART;
+}
 
-	default:
-		WARN_ON_ONCE(1);
-	}
+static enum hrtimer_restart isotp_txfr_timer_handler(struct hrtimer *hrtimer)
+{
+	struct isotp_sock *so = container_of(hrtimer, struct isotp_sock,
+					     txfrtimer);
 
-	return restart;
+	/* start echo timeout handling and cover below protocol error */
+	hrtimer_start(&so->txtimer, ktime_set(ISOTP_ECHO_TIMEOUT, 0),
+		      HRTIMER_MODE_REL_SOFT);
+
+	/* cfecho should be consumed by isotp_rcv_echo() here */
+	if (so->tx.state == ISOTP_SENDING && !so->cfecho)
+		isotp_send_cframe(so);
+
+	return HRTIMER_NORESTART;
 }
 
 static int isotp_sendmsg(struct socket *sock, struct msghdr *msg, size_t size)
 {
 	struct sock *sk = sock->sk;
 	struct isotp_sock *so = isotp_sk(sk);
-	u32 old_state = so->tx.state;
 	struct sk_buff *skb;
 	struct net_device *dev;
 	struct canfd_frame *cf;
 	int ae = (so->opt.flags & CAN_ISOTP_EXTEND_ADDR) ? 1 : 0;
 	int wait_tx_done = (so->opt.flags & CAN_ISOTP_WAIT_TX_DONE) ? 1 : 0;
-	s64 hrtimer_sec = 0;
+	s64 hrtimer_sec = ISOTP_ECHO_TIMEOUT;
 	int off;
 	int err;
 
-	if (!so->bound)
+	if (!so->bound || so->tx.state == ISOTP_SHUTDOWN)
 		return -EADDRNOTAVAIL;
 
+wait_free_buffer:
 	/* we do not support multiple buffers - for now */
-	if (cmpxchg(&so->tx.state, ISOTP_IDLE, ISOTP_SENDING) != ISOTP_IDLE ||
-	    wq_has_sleeper(&so->wait)) {
-		if (msg->msg_flags & MSG_DONTWAIT) {
-			err = -EAGAIN;
-			goto err_out;
-		}
+	if (wq_has_sleeper(&so->wait) && (msg->msg_flags & MSG_DONTWAIT))
+		return -EAGAIN;
 
-		/* wait for complete transmission of current pdu */
-		err = wait_event_interruptible(so->wait, so->tx.state == ISOTP_IDLE);
-		if (err)
-			goto err_out;
+	/* wait for complete transmission of current pdu */
+	err = wait_event_interruptible(so->wait, so->tx.state == ISOTP_IDLE);
+	if (err)
+		goto err_event_drop;
+
+	if (cmpxchg(&so->tx.state, ISOTP_IDLE, ISOTP_SENDING) != ISOTP_IDLE) {
+		if (so->tx.state == ISOTP_SHUTDOWN)
+			return -EADDRNOTAVAIL;
+
+		goto wait_free_buffer;
 	}
 
 	if (!size || size > MAX_MSG_LENGTH) {
@@ -896,7 +951,7 @@ static int isotp_sendmsg(struct socket *
 	off = (so->tx.ll_dl > CAN_MAX_DLEN) ? 1 : 0;
 
 	/* does the given data fit into a single frame for SF_BROADCAST? */
-	if ((so->opt.flags & CAN_ISOTP_SF_BROADCAST) &&
+	if ((isotp_bc_flags(so) == CAN_ISOTP_SF_BROADCAST) &&
 	    (size > so->tx.ll_dl - SF_PCI_SZ4 - ae - off)) {
 		err = -EINVAL;
 		goto err_out_drop;
@@ -929,6 +984,10 @@ static int isotp_sendmsg(struct socket *
 	cf = (struct canfd_frame *)skb->data;
 	skb_put_zero(skb, so->ll.mtu);
 
+	/* cfecho should have been zero'ed by init / former isotp_rcv_echo() */
+	if (so->cfecho)
+		pr_notice_once("can-isotp: uninit cfecho %08X\n", so->cfecho);
+
 	/* check for single frame transmission depending on TX_DL */
 	if (size <= so->tx.ll_dl - SF_PCI_SZ4 - ae - off) {
 		/* The message size generally fits into a SingleFrame - good.
@@ -954,22 +1013,40 @@ static int isotp_sendmsg(struct socket *
 		else
 			cf->data[ae] |= size;
 
-		so->tx.state = ISOTP_IDLE;
-		wake_up_interruptible(&so->wait);
-
-		/* don't enable wait queue for a single frame transmission */
-		wait_tx_done = 0;
+		/* set CF echo tag for isotp_rcv_echo() (SF-mode) */
+		so->cfecho = *(u32 *)cf->data;
 	} else {
-		/* send first frame and wait for FC */
+		/* send first frame */
 
 		isotp_create_fframe(cf, so, ae);
 
-		/* start timeout for FC */
-		hrtimer_sec = 1;
-		hrtimer_start(&so->txtimer, ktime_set(hrtimer_sec, 0),
-			      HRTIMER_MODE_REL_SOFT);
+		if (isotp_bc_flags(so) == CAN_ISOTP_CF_BROADCAST) {
+			/* set timer for FC-less operation (STmin = 0) */
+			if (so->opt.flags & CAN_ISOTP_FORCE_TXSTMIN)
+				so->tx_gap = ktime_set(0, so->force_tx_stmin);
+			else
+				so->tx_gap = ktime_set(0, so->frame_txtime);
+
+			/* disable wait for FCs due to activated block size */
+			so->txfc.bs = 0;
+
+			/* set CF echo tag for isotp_rcv_echo() (CF-mode) */
+			so->cfecho = *(u32 *)cf->data;
+		} else {
+			/* standard flow control check */
+			so->tx.state = ISOTP_WAIT_FIRST_FC;
+
+			/* start timeout for FC */
+			hrtimer_sec = ISOTP_FC_TIMEOUT;
+
+			/* no CF echo tag for isotp_rcv_echo() (FF-mode) */
+			so->cfecho = 0;
+		}
 	}
 
+	hrtimer_start(&so->txtimer, ktime_set(hrtimer_sec, 0),
+		      HRTIMER_MODE_REL_SOFT);
+
 	/* send the first or only CAN frame */
 	cf->flags = so->ll.tx_flags;
 
@@ -982,15 +1059,19 @@ static int isotp_sendmsg(struct socket *
 			       __func__, ERR_PTR(err));
 
 		/* no transmission -> no timeout monitoring */
-		if (hrtimer_sec)
-			hrtimer_cancel(&so->txtimer);
+		hrtimer_cancel(&so->txtimer);
+
+		/* reset consecutive frame echo tag */
+		so->cfecho = 0;
 
 		goto err_out_drop;
 	}
 
 	if (wait_tx_done) {
 		/* wait for complete transmission of current pdu */
-		wait_event_interruptible(so->wait, so->tx.state == ISOTP_IDLE);
+		err = wait_event_interruptible(so->wait, so->tx.state == ISOTP_IDLE);
+		if (err)
+			goto err_event_drop;
 
 		err = sock_error(sk);
 		if (err)
@@ -999,13 +1080,15 @@ static int isotp_sendmsg(struct socket *
 
 	return size;
 
+err_event_drop:
+	/* got signal: force tx state machine to be idle */
+	so->tx.state = ISOTP_IDLE;
+	hrtimer_cancel(&so->txfrtimer);
+	hrtimer_cancel(&so->txtimer);
 err_out_drop:
 	/* drop this PDU and unlock a potential wait queue */
-	old_state = ISOTP_IDLE;
-err_out:
-	so->tx.state = old_state;
-	if (so->tx.state == ISOTP_IDLE)
-		wake_up_interruptible(&so->wait);
+	so->tx.state = ISOTP_IDLE;
+	wake_up_interruptible(&so->wait);
 
 	return err;
 }
@@ -1069,10 +1152,12 @@ static int isotp_release(struct socket *
 	net = sock_net(sk);
 
 	/* wait for complete transmission of current pdu */
-	wait_event_interruptible(so->wait, so->tx.state == ISOTP_IDLE);
+	while (wait_event_interruptible(so->wait, so->tx.state == ISOTP_IDLE) == 0 &&
+	       cmpxchg(&so->tx.state, ISOTP_IDLE, ISOTP_SHUTDOWN) != ISOTP_IDLE)
+		;
 
 	/* force state machines to be idle also when a signal occurred */
-	so->tx.state = ISOTP_IDLE;
+	so->tx.state = ISOTP_SHUTDOWN;
 	so->rx.state = ISOTP_IDLE;
 
 	spin_lock(&isotp_notifier_lock);
@@ -1087,21 +1172,27 @@ static int isotp_release(struct socket *
 	lock_sock(sk);
 
 	/* remove current filters & unregister */
-	if (so->bound && (!(so->opt.flags & CAN_ISOTP_SF_BROADCAST))) {
+	if (so->bound) {
 		if (so->ifindex) {
 			struct net_device *dev;
 
 			dev = dev_get_by_index(net, so->ifindex);
 			if (dev) {
-				can_rx_unregister(net, dev, so->rxid,
-						  SINGLE_MASK(so->rxid),
-						  isotp_rcv, sk);
+				if (isotp_register_rxid(so))
+					can_rx_unregister(net, dev, so->rxid,
+							  SINGLE_MASK(so->rxid),
+							  isotp_rcv, sk);
+
+				can_rx_unregister(net, dev, so->txid,
+						  SINGLE_MASK(so->txid),
+						  isotp_rcv_echo, sk);
 				dev_put(dev);
 				synchronize_rcu();
 			}
 		}
 	}
 
+	hrtimer_cancel(&so->txfrtimer);
 	hrtimer_cancel(&so->txtimer);
 	hrtimer_cancel(&so->rxtimer);
 
@@ -1128,7 +1219,6 @@ static int isotp_bind(struct socket *soc
 	canid_t tx_id, rx_id;
 	int err = 0;
 	int notify_enetdown = 0;
-	int do_rx_reg = 1;
 
 	if (len < ISOTP_MIN_NAMELEN)
 		return -EINVAL;
@@ -1164,12 +1254,8 @@ static int isotp_bind(struct socket *soc
 		goto out;
 	}
 
-	/* do not register frame reception for functional addressing */
-	if (so->opt.flags & CAN_ISOTP_SF_BROADCAST)
-		do_rx_reg = 0;
-
-	/* do not validate rx address for functional addressing */
-	if (do_rx_reg && rx_id == tx_id) {
+	/* ensure different CAN IDs when the rx_id is to be registered */
+	if (isotp_register_rxid(so) && rx_id == tx_id) {
 		err = -EADDRNOTAVAIL;
 		goto out;
 	}
@@ -1194,10 +1280,17 @@ static int isotp_bind(struct socket *soc
 
 	ifindex = dev->ifindex;
 
-	if (do_rx_reg)
+	if (isotp_register_rxid(so))
 		can_rx_register(net, dev, rx_id, SINGLE_MASK(rx_id),
 				isotp_rcv, sk, "isotp", sk);
 
+	/* no consecutive frame echo skb in flight */
+	so->cfecho = 0;
+
+	/* register for echo skb's */
+	can_rx_register(net, dev, tx_id, SINGLE_MASK(tx_id),
+			isotp_rcv_echo, sk, "isotpe", sk);
+
 	dev_put(dev);
 
 	/* switch to new settings */
@@ -1258,6 +1351,15 @@ static int isotp_setsockopt_locked(struc
 		if (!(so->opt.flags & CAN_ISOTP_RX_EXT_ADDR))
 			so->opt.rx_ext_address = so->opt.ext_address;
 
+		/* these broadcast flags are not allowed together */
+		if (isotp_bc_flags(so) == ISOTP_ALL_BC_FLAGS) {
+			/* CAN_ISOTP_SF_BROADCAST is prioritized */
+			so->opt.flags &= ~CAN_ISOTP_CF_BROADCAST;
+
+			/* give user feedback on wrong config attempt */
+			ret = -EINVAL;
+		}
+
 		/* check for frame_txtime changes (0 => no changes) */
 		if (so->opt.frame_txtime) {
 			if (so->opt.frame_txtime == CAN_ISOTP_FRAME_TXTIME_ZERO)
@@ -1408,10 +1510,16 @@ static void isotp_notify(struct isotp_so
 	case NETDEV_UNREGISTER:
 		lock_sock(sk);
 		/* remove current filters & unregister */
-		if (so->bound && (!(so->opt.flags & CAN_ISOTP_SF_BROADCAST)))
-			can_rx_unregister(dev_net(dev), dev, so->rxid,
-					  SINGLE_MASK(so->rxid),
-					  isotp_rcv, sk);
+		if (so->bound) {
+			if (isotp_register_rxid(so))
+				can_rx_unregister(dev_net(dev), dev, so->rxid,
+						  SINGLE_MASK(so->rxid),
+						  isotp_rcv, sk);
+
+			can_rx_unregister(dev_net(dev), dev, so->txid,
+					  SINGLE_MASK(so->txid),
+					  isotp_rcv_echo, sk);
+		}
 
 		so->ifindex = 0;
 		so->bound  = 0;
@@ -1484,6 +1592,8 @@ static int isotp_init(struct sock *sk)
 	so->rxtimer.function = isotp_rx_timer_handler;
 	hrtimer_init(&so->txtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL_SOFT);
 	so->txtimer.function = isotp_tx_timer_handler;
+	hrtimer_init(&so->txfrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL_SOFT);
+	so->txfrtimer.function = isotp_txfr_timer_handler;
 
 	init_waitqueue_head(&so->wait);
 	spin_lock_init(&so->rx_lock);

[PATCH 5.15 109/128] can: isotp: isotp_bind(): do not validate unused address information

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oliver Hartkopp <socketcan@hartkopp.net>

commit b76b163f46b661499921a0049982764a6659bfe7 upstream

With commit 2aa39889c463 ("can: isotp: isotp_bind(): return -EINVAL on
incorrect CAN ID formatting") the bind() syscall returns -EINVAL when
the given CAN ID needed to be sanitized. But in the case of an unconfirmed
broadcast mode the rx CAN ID is not needed and may be uninitialized from
the caller - which is ok.

This patch makes sure the result of an inproper CAN ID format is only
provided when the address information is needed.

Link: https://lore.kernel.org/all/20220517145653.2556-1-socketcan@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/can/isotp.c |   29 +++++++++++++++++------------
 1 file changed, 17 insertions(+), 12 deletions(-)

--- a/net/can/isotp.c
+++ b/net/can/isotp.c
@@ -1216,7 +1216,8 @@ static int isotp_bind(struct socket *soc
 	struct net *net = sock_net(sk);
 	int ifindex;
 	struct net_device *dev;
-	canid_t tx_id, rx_id;
+	canid_t tx_id = addr->can_addr.tp.tx_id;
+	canid_t rx_id = addr->can_addr.tp.rx_id;
 	int err = 0;
 	int notify_enetdown = 0;
 
@@ -1226,24 +1227,28 @@ static int isotp_bind(struct socket *soc
 	if (addr->can_family != AF_CAN)
 		return -EINVAL;
 
-	/* sanitize tx/rx CAN identifiers */
-	tx_id = addr->can_addr.tp.tx_id;
+	/* sanitize tx CAN identifier */
 	if (tx_id & CAN_EFF_FLAG)
 		tx_id &= (CAN_EFF_FLAG | CAN_EFF_MASK);
 	else
 		tx_id &= CAN_SFF_MASK;
 
-	rx_id = addr->can_addr.tp.rx_id;
-	if (rx_id & CAN_EFF_FLAG)
-		rx_id &= (CAN_EFF_FLAG | CAN_EFF_MASK);
-	else
-		rx_id &= CAN_SFF_MASK;
-
-	/* give feedback on wrong CAN-ID values */
-	if (tx_id != addr->can_addr.tp.tx_id ||
-	    rx_id != addr->can_addr.tp.rx_id)
+	/* give feedback on wrong CAN-ID value */
+	if (tx_id != addr->can_addr.tp.tx_id)
 		return -EINVAL;
 
+	/* sanitize rx CAN identifier (if needed) */
+	if (isotp_register_rxid(so)) {
+		if (rx_id & CAN_EFF_FLAG)
+			rx_id &= (CAN_EFF_FLAG | CAN_EFF_MASK);
+		else
+			rx_id &= CAN_SFF_MASK;
+
+		/* give feedback on wrong CAN-ID value */
+		if (rx_id != addr->can_addr.tp.rx_id)
+			return -EINVAL;
+	}
+
 	if (!addr->can_ifindex)
 		return -ENODEV;
 

[PATCH 5.15 110/128] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oliver Hartkopp <socketcan@hartkopp.net>

From: Lukas Magel <lukas.magel@posteo.net>

[ Upstream commit d9c2ba65e651467de739324d978b04ed8729f483 ]

With patch [1], isotp_poll was updated to also queue the poller in the
so->wait queue, which is used for send state changes. Since the queue
now also contains polling tasks that are not interested in sending, the
queue fill state can no longer be used as an indication of send
readiness. As a consequence, nonblocking writes can lead to a race and
lock-up of the socket if there is a second task polling the socket in
parallel.

With this patch, isotp_sendmsg does not consult wq_has_sleepers but
instead tries to atomically set so->tx.state and waits on so->wait if it
is unable to do so. This behavior is in alignment with isotp_poll, which
also checks so->tx.state to determine send readiness.

V2:
- Revert direct exit to goto err_event_drop

[1] https://lore.kernel.org/all/20230331125511.372783-1-michal.sojka@cvut.cz

Reported-by: Maxime Jayat <maxime.jayat@mobile-devices.fr>
Closes: https://lore.kernel.org/linux-can/11328958-453f-447f-9af8-3b5824dfb041@munic.io/
Signed-off-by: Lukas Magel <lukas.magel@posteo.net>
Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net>
Fixes: 79e19fa79cb5 ("can: isotp: isotp_ops: fix poll() to not report false EPOLLOUT events")
Link: https://github.com/pylessard/python-udsoncan/issues/178#issuecomment-1743786590
Link: https://lore.kernel.org/all/20230827092205.7908-1-lukas.magel@posteo.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/can/isotp.c |   19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

--- a/net/can/isotp.c
+++ b/net/can/isotp.c
@@ -925,21 +925,18 @@ static int isotp_sendmsg(struct socket *
 	if (!so->bound || so->tx.state == ISOTP_SHUTDOWN)
 		return -EADDRNOTAVAIL;
 
-wait_free_buffer:
-	/* we do not support multiple buffers - for now */
-	if (wq_has_sleeper(&so->wait) && (msg->msg_flags & MSG_DONTWAIT))
-		return -EAGAIN;
+	while (cmpxchg(&so->tx.state, ISOTP_IDLE, ISOTP_SENDING) != ISOTP_IDLE) {
+		/* we do not support multiple buffers - for now */
+		if (msg->msg_flags & MSG_DONTWAIT)
+			return -EAGAIN;
 
-	/* wait for complete transmission of current pdu */
-	err = wait_event_interruptible(so->wait, so->tx.state == ISOTP_IDLE);
-	if (err)
-		goto err_event_drop;
-
-	if (cmpxchg(&so->tx.state, ISOTP_IDLE, ISOTP_SENDING) != ISOTP_IDLE) {
 		if (so->tx.state == ISOTP_SHUTDOWN)
 			return -EADDRNOTAVAIL;
 
-		goto wait_free_buffer;
+		/* wait for complete transmission of current pdu */
+		err = wait_event_interruptible(so->wait, so->tx.state == ISOTP_IDLE);
+		if (err)
+			goto err_event_drop;
 	}
 
 	if (!size || size > MAX_MSG_LENGTH) {

[PATCH 5.15 111/128] drm/amd: Move helper for dynamic speed switch check out of smu13

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mario Limonciello <mario.limonciello@amd.com>

commit 188623076d0f1a500583d392b6187056bf7cc71a upstream.

This helper is used for checking if the connected host supports
the feature, it can be moved into generic code to be used by other
smu implementations as well.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu.h        |    1 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c |   19 +++++++++++++++++++
 2 files changed, 20 insertions(+)

--- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
@@ -1285,6 +1285,7 @@ int amdgpu_device_gpu_recover(struct amd
 void amdgpu_device_pci_config_reset(struct amdgpu_device *adev);
 int amdgpu_device_pci_reset(struct amdgpu_device *adev);
 bool amdgpu_device_need_post(struct amdgpu_device *adev);
+bool amdgpu_device_pcie_dynamic_switching_supported(void);
 bool amdgpu_device_should_use_aspm(struct amdgpu_device *adev);
 bool amdgpu_device_aspm_support_quirk(void);
 
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -1319,6 +1319,25 @@ bool amdgpu_device_need_post(struct amdg
 	return true;
 }
 
+/*
+ * Intel hosts such as Raptor Lake and Sapphire Rapids don't support dynamic
+ * speed switching. Until we have confirmation from Intel that a specific host
+ * supports it, it's safer that we keep it disabled for all.
+ *
+ * https://edc.intel.com/content/www/us/en/design/products/platforms/details/raptor-lake-s/13th-generation-core-processors-datasheet-volume-1-of-2/005/pci-express-support/
+ * https://gitlab.freedesktop.org/drm/amd/-/issues/2663
+ */
+bool amdgpu_device_pcie_dynamic_switching_supported(void)
+{
+#if IS_ENABLED(CONFIG_X86)
+	struct cpuinfo_x86 *c = &cpu_data(0);
+
+	if (c->x86_vendor == X86_VENDOR_INTEL)
+		return false;
+#endif
+	return true;
+}
+
 /**
  * amdgpu_device_should_use_aspm - check if the device should program ASPM
  *

[PATCH 5.15 112/128] drm/amd: Disable ASPM for VI w/ all Intel systems

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mario Limonciello <mario.limonciello@amd.com>

commit 64ffd2f1d00c6235dabe9704bbb0d9ce3e28147f upstream.

Originally we were quirking ASPM disabled specifically for VI when
used with Alder Lake, but it appears to have problems with Rocket
Lake as well.

Like we've done in the case of dpm for newer platforms, disable
ASPM for all Intel systems.

Cc: stable@vger.kernel.org # 5.15+
Fixes: 0064b0ce85bb ("drm/amd/pm: enable ASPM by default")
Reported-and-tested-by: Paolo Gentili <paolo.gentili@canonical.com>
Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2036742
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdgpu/vi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/amd/amdgpu/vi.c
+++ b/drivers/gpu/drm/amd/amdgpu/vi.c
@@ -1147,7 +1147,7 @@ static void vi_program_aspm(struct amdgp
 	bool bL1SS = false;
 	bool bClkReqSupport = true;
 
-	if (!amdgpu_device_should_use_aspm(adev) || !amdgpu_device_aspm_support_quirk())
+	if (!amdgpu_device_should_use_aspm(adev) || !amdgpu_device_pcie_dynamic_switching_supported())
 		return;
 
 	if (adev->flags & AMD_IS_APU ||

[PATCH 5.15 113/128] PCI: Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vicki Pfau <vi@endrift.com>

commit 7e6f3b6d2c352b5fde37ce3fed83bdf6172eebd4 upstream.

The AMD VanGogh SoC contains a DesignWare USB3 Dual-Role Device that can be
operated as either a USB Host or a USB Device, similar to on the AMD Nolan
platform.

be6646bfbaec ("PCI: Prevent xHCI driver from claiming AMD Nolan USB3 DRD
device") added a quirk to let the dwc3 driver claim the Nolan device since
it provides more specific support.

Extend that quirk to include the VanGogh SoC USB3 device.

Link: https://lore.kernel.org/r/20230927202212.2388216-1-vi@endrift.com
Signed-off-by: Vicki Pfau <vi@endrift.com>
[bhelgaas: include be6646bfbaec reference, add stable tag]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org	# v3.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/quirks.c    |    8 +++++---
 include/linux/pci_ids.h |    1 +
 2 files changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -592,7 +592,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AT
 /*
  * In the AMD NL platform, this device ([1022:7912]) has a class code of
  * PCI_CLASS_SERIAL_USB_XHCI (0x0c0330), which means the xhci driver will
- * claim it.
+ * claim it. The same applies on the VanGogh platform device ([1022:163a]).
  *
  * But the dwc3 driver is a more specific driver for this device, and we'd
  * prefer to use it instead of xhci. To prevent xhci from claiming the
@@ -600,7 +600,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AT
  * defines as "USB device (not host controller)". The dwc3 driver can then
  * claim it based on its Vendor and Device ID.
  */
-static void quirk_amd_nl_class(struct pci_dev *pdev)
+static void quirk_amd_dwc_class(struct pci_dev *pdev)
 {
 	u32 class = pdev->class;
 
@@ -610,7 +610,9 @@ static void quirk_amd_nl_class(struct pc
 		 class, pdev->class);
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB,
-		quirk_amd_nl_class);
+		quirk_amd_dwc_class);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VANGOGH_USB,
+		quirk_amd_dwc_class);
 
 /*
  * Synopsys USB 3.x host HAPS platform has a class code of
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -556,6 +556,7 @@
 #define PCI_DEVICE_ID_AMD_17H_M30H_DF_F3 0x1493
 #define PCI_DEVICE_ID_AMD_17H_M60H_DF_F3 0x144b
 #define PCI_DEVICE_ID_AMD_17H_M70H_DF_F3 0x1443
+#define PCI_DEVICE_ID_AMD_VANGOGH_USB	0x163a
 #define PCI_DEVICE_ID_AMD_19H_DF_F3	0x1653
 #define PCI_DEVICE_ID_AMD_19H_M40H_DF_F3 0x167c
 #define PCI_DEVICE_ID_AMD_19H_M50H_DF_F3 0x166d

[PATCH 5.15 114/128] usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: LihaSika <lihasika@gmail.com>

commit 0e3139e6543b241b3e65956a55c712333bef48ac upstream.

Change lower bcdDevice value for "Super Top USB 2.0  SATA BRIDGE" to match
1.50. I have such an older device with bcdDevice=1.50 and it will not work
otherwise.

Cc: stable@vger.kernel.org
Signed-off-by: Liha Sikanen <lihasika@gmail.com>
Link: https://lore.kernel.org/r/ccf7d12a-8362-4916-b3e0-f4150f54affd@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/storage/unusual_cypress.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/storage/unusual_cypress.h
+++ b/drivers/usb/storage/unusual_cypress.h
@@ -19,7 +19,7 @@ UNUSUAL_DEV(  0x04b4, 0x6831, 0x0000, 0x
 		"Cypress ISD-300LP",
 		USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
 
-UNUSUAL_DEV( 0x14cd, 0x6116, 0x0160, 0x0160,
+UNUSUAL_DEV( 0x14cd, 0x6116, 0x0150, 0x0160,
 		"Super Top",
 		"USB 2.0  SATA BRIDGE",
 		USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),

[PATCH 5.15 115/128] usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm()

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jimmy Hu <hhhuuu@google.com>

commit 4987daf86c152ff882d51572d154ad12e4ff3a4b upstream.

It is possible that typec_register_partner() returns ERR_PTR on failure.
When port->partner is an error, a NULL pointer dereference may occur as
shown below.

[91222.095236][  T319] typec port0: failed to register partner (-17)
...
[91225.061491][  T319] Unable to handle kernel NULL pointer dereference
at virtual address 000000000000039f
[91225.274642][  T319] pc : tcpm_pd_data_request+0x310/0x13fc
[91225.274646][  T319] lr : tcpm_pd_data_request+0x298/0x13fc
[91225.308067][  T319] Call trace:
[91225.308070][  T319]  tcpm_pd_data_request+0x310/0x13fc
[91225.308073][  T319]  tcpm_pd_rx_handler+0x100/0x9e8
[91225.355900][  T319]  kthread_worker_fn+0x178/0x58c
[91225.355902][  T319]  kthread+0x150/0x200
[91225.355905][  T319]  ret_from_fork+0x10/0x30

Add a check for port->partner to avoid dereferencing a NULL pointer.

Fixes: 5e1d4c49fbc8 ("usb: typec: tcpm: Determine common SVDM Version")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Hu <hhhuuu@google.com>
Link: https://lore.kernel.org/r/20231020012132.100960-1-hhhuuu@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/typec/tcpm/tcpm.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -1608,6 +1608,9 @@ static int tcpm_pd_svdm(struct tcpm_port
 			if (PD_VDO_VID(p[0]) != USB_SID_PD)
 				break;
 
+			if (IS_ERR_OR_NULL(port->partner))
+				break;
+
 			if (PD_VDO_SVDM_VER(p[0]) < svdm_version) {
 				typec_partner_set_svdm_version(port->partner,
 							       PD_VDO_SVDM_VER(p[0]));

[PATCH 5.15 116/128] usb: raw-gadget: properly handle interrupted requests

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrey Konovalov <andreyknvl@gmail.com>

commit e8033bde451eddfb9b1bbd6e2d848c1b5c277222 upstream.

Currently, if a USB request that was queued by Raw Gadget is interrupted
(via a signal), wait_for_completion_interruptible returns -ERESTARTSYS.
Raw Gadget then attempts to propagate this value to userspace as a return
value from its ioctls. However, when -ERESTARTSYS is returned by a syscall
handler, the kernel internally restarts the syscall.

This doesn't allow userspace applications to interrupt requests queued by
Raw Gadget (which is required when the emulated device is asked to switch
altsettings). It also violates the implied interface of Raw Gadget that a
single ioctl must only queue a single USB request.

Instead, make Raw Gadget do what GadgetFS does: check whether the request
was interrupted (dequeued with status == -ECONNRESET) and report -EINTR to
userspace.

Fixes: f2c2e717642c ("usb: gadget: add raw-gadget interface")
Cc: stable <stable@kernel.org>
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/0db45b1d7cc466e3d4d1ab353f61d63c977fbbc5.1698350424.git.andreyknvl@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/legacy/raw_gadget.c |   26 ++++++++++++++++----------
 1 file changed, 16 insertions(+), 10 deletions(-)

--- a/drivers/usb/gadget/legacy/raw_gadget.c
+++ b/drivers/usb/gadget/legacy/raw_gadget.c
@@ -663,12 +663,12 @@ static int raw_process_ep0_io(struct raw
 	if (WARN_ON(in && dev->ep0_out_pending)) {
 		ret = -ENODEV;
 		dev->state = STATE_DEV_FAILED;
-		goto out_done;
+		goto out_unlock;
 	}
 	if (WARN_ON(!in && dev->ep0_in_pending)) {
 		ret = -ENODEV;
 		dev->state = STATE_DEV_FAILED;
-		goto out_done;
+		goto out_unlock;
 	}
 
 	dev->req->buf = data;
@@ -683,7 +683,7 @@ static int raw_process_ep0_io(struct raw
 				"fail, usb_ep_queue returned %d\n", ret);
 		spin_lock_irqsave(&dev->lock, flags);
 		dev->state = STATE_DEV_FAILED;
-		goto out_done;
+		goto out_queue_failed;
 	}
 
 	ret = wait_for_completion_interruptible(&dev->ep0_done);
@@ -692,13 +692,16 @@ static int raw_process_ep0_io(struct raw
 		usb_ep_dequeue(dev->gadget->ep0, dev->req);
 		wait_for_completion(&dev->ep0_done);
 		spin_lock_irqsave(&dev->lock, flags);
-		goto out_done;
+		if (dev->ep0_status == -ECONNRESET)
+			dev->ep0_status = -EINTR;
+		goto out_interrupted;
 	}
 
 	spin_lock_irqsave(&dev->lock, flags);
-	ret = dev->ep0_status;
 
-out_done:
+out_interrupted:
+	ret = dev->ep0_status;
+out_queue_failed:
 	dev->ep0_urb_queued = false;
 out_unlock:
 	spin_unlock_irqrestore(&dev->lock, flags);
@@ -1060,7 +1063,7 @@ static int raw_process_ep_io(struct raw_
 				"fail, usb_ep_queue returned %d\n", ret);
 		spin_lock_irqsave(&dev->lock, flags);
 		dev->state = STATE_DEV_FAILED;
-		goto out_done;
+		goto out_queue_failed;
 	}
 
 	ret = wait_for_completion_interruptible(&done);
@@ -1069,13 +1072,16 @@ static int raw_process_ep_io(struct raw_
 		usb_ep_dequeue(ep->ep, ep->req);
 		wait_for_completion(&done);
 		spin_lock_irqsave(&dev->lock, flags);
-		goto out_done;
+		if (ep->status == -ECONNRESET)
+			ep->status = -EINTR;
+		goto out_interrupted;
 	}
 
 	spin_lock_irqsave(&dev->lock, flags);
-	ret = ep->status;
 
-out_done:
+out_interrupted:
+	ret = ep->status;
+out_queue_failed:
 	ep->urb_queued = false;
 out_unlock:
 	spin_unlock_irqrestore(&dev->lock, flags);

[PATCH 5.15 117/128] tty: n_gsm: fix race condition in status line change on dead connections

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Starke <daniel.starke@siemens.com>

commit 3a75b205de43365f80a33b98ec9289785da56243 upstream.

gsm_cleanup_mux() cleans up the gsm by closing all DLCIs, stopping all
timers, removing the virtual tty devices and clearing the data queues.
This procedure, however, may cause subsequent changes of the virtual modem
status lines of a DLCI. More data is being added the outgoing data queue
and the deleted kick timer is restarted to handle this. At this point many
resources have already been removed by the cleanup procedure. Thus, a
kernel panic occurs.

Fix this by proving in gsm_modem_update() that the cleanup procedure has
not been started and the mux is still alive.

Note that writing to a virtual tty is already protected by checks against
the DLCI specific connection state.

Fixes: c568f7086c6e ("tty: n_gsm: fix missing timer to handle stalled links")
Cc: stable <stable@kernel.org>
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20231026055844.3127-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/n_gsm.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -3273,6 +3273,8 @@ static int gsm_modem_upd_via_msc(struct
 
 static int gsm_modem_update(struct gsm_dlci *dlci, u8 brk)
 {
+	if (dlci->gsm->dead)
+		return -EL2HLT;
 	if (dlci->adaption == 2) {
 		/* Send convergence layer type 2 empty data frame. */
 		gsm_modem_upd_via_data(dlci, brk);

[PATCH 5.15 118/128] tty: 8250: Remove UC-257 and UC-431

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cameron Williams <cang1@live.co.uk>

commit 33092fb3af51deb80849e90a17bada44bbcde6b3 upstream.

The UC-257 is a serial + LPT card, so remove it from this driver.
A patch has been submitted to add it to parport_serial instead.

Additionaly, the UC-431 does not use this card ID, only the UC-420
does. The 431 is a 3-port card and there is no generic 3-port configuration
available, so remove reference to it from this driver.

Fixes: 152d1afa834c ("tty: Add support for Brainboxes UC cards.")
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB78995ADF7394C74AD4CF3357C4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_pci.c |    9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -5368,13 +5368,6 @@ static const struct pci_device_id serial
 		0, 0,
 		pbn_b2_1_115200 },
 	/*
-	 * Brainboxes UC-257
-	 */
-	{	PCI_VENDOR_ID_INTASHIELD, 0x0861,
-		PCI_ANY_ID, PCI_ANY_ID,
-		0, 0,
-		pbn_b2_2_115200 },
-	/*
 	 * Brainboxes UC-260/271/701/756
 	 */
 	{	PCI_VENDOR_ID_INTASHIELD, 0x0D21,
@@ -5453,7 +5446,7 @@ static const struct pci_device_id serial
 		0, 0,
 		pbn_b2_4_115200 },
 	/*
-	 * Brainboxes UC-420/431
+	 * Brainboxes UC-420
 	 */
 	{       PCI_VENDOR_ID_INTASHIELD, 0x0921,
 		PCI_ANY_ID, PCI_ANY_ID,

[PATCH 5.15 119/128] tty: 8250: Add support for additional Brainboxes UC cards

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cameron Williams <cang1@live.co.uk>

commit c563db486db7d245c0e2f319443417ae8e692f7f upstream.

Add device IDs for some more Brainboxes UC cards, namely
UC-235/UC-246, UC-253/UC-734, UC-302, UC-313, UC-346, UC-357,
UC-607 and UC-836.

Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB789969998A6C3FAFCD95C85DC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_pci.c |   57 +++++++++++++++++++++++++++++++++++++
 1 file changed, 57 insertions(+)

--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -5367,6 +5367,17 @@ static const struct pci_device_id serial
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
 		pbn_b2_1_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0AA2,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_1_115200 },
+	/*
+	 * Brainboxes UC-253/UC-734
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0CA1,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
 	/*
 	 * Brainboxes UC-260/271/701/756
 	 */
@@ -5399,6 +5410,14 @@ static const struct pci_device_id serial
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
 		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x08E2,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x08E3,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
 	/*
 	 * Brainboxes UC-310
 	 */
@@ -5409,6 +5428,14 @@ static const struct pci_device_id serial
 	/*
 	 * Brainboxes UC-313
 	 */
+	{       PCI_VENDOR_ID_INTASHIELD, 0x08A1,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{       PCI_VENDOR_ID_INTASHIELD, 0x08A2,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
 	{       PCI_VENDOR_ID_INTASHIELD, 0x08A3,
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
@@ -5423,6 +5450,10 @@ static const struct pci_device_id serial
 	/*
 	 * Brainboxes UC-346
 	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0B01,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_4_115200 },
 	{	PCI_VENDOR_ID_INTASHIELD, 0x0B02,
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
@@ -5434,6 +5465,10 @@ static const struct pci_device_id serial
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
 		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0A82,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
 	{	PCI_VENDOR_ID_INTASHIELD, 0x0A83,
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
@@ -5452,6 +5487,28 @@ static const struct pci_device_id serial
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
 		pbn_b2_4_115200 },
+	/*
+	 * Brainboxes UC-607
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x09A1,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x09A2,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x09A3,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	/*
+	 * Brainboxes UC-836
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0D41,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_4_115200 },
 	/*
 	 * Brainboxes PX-101
 	 */

[PATCH 5.15 120/128] tty: 8250: Add support for Brainboxes UP cards

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cameron Williams <cang1@live.co.uk>

commit 2c6fec1e1532f15350be7e14ba6b88a39d289fe4 upstream.

Add support for the Brainboxes UP (powered PCI) range of
cards, namely UP-189, UP-200, UP-869 and UP-880.

Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB7899B5B59FF3D8587E88C117C4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_pci.c |   60 +++++++++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -5510,6 +5510,66 @@ static const struct pci_device_id serial
 		0, 0,
 		pbn_b2_4_115200 },
 	/*
+	 * Brainboxes UP-189
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0AC1,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0AC2,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0AC3,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	/*
+	 * Brainboxes UP-200
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0B21,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0B22,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0B23,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	/*
+	 * Brainboxes UP-869
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0C01,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0C02,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0C03,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	/*
+	 * Brainboxes UP-880
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0C21,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0C22,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0C23,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	/*
 	 * Brainboxes PX-101
 	 */
 	{	PCI_VENDOR_ID_INTASHIELD, 0x4005,

[PATCH 5.15 121/128] tty: 8250: Add support for Intashield IS-100

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cameron Williams <cang1@live.co.uk>

commit 4d994e3cf1b541ff32dfb03fbbc60eea68f9645b upstream.

Add support for the Intashield IS-100 1 port serial card.

Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB7899A0E0CDAA505AF5A874CDC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_pci.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -5341,6 +5341,12 @@ static const struct pci_device_id serial
 		pbn_b1_bt_1_115200 },
 
 	/*
+	 * IntaShield IS-100
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0D60,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_1_115200 },
+	/*
 	 * IntaShield IS-200
 	 */
 	{	PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200,

[PATCH 5.15 122/128] tty: 8250: Fix port count of PX-257

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cameron Williams <cang1@live.co.uk>

commit d0ff5b24c2f112f29dea4c38b3bac9597b1be9ba upstream.

The port count of the PX-257 Rev3 is actually 2, not 4.

Fixes: ef5a03a26c87 ("tty: 8250: Add support for Brainboxes PX cards.")
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB7899C804D9F04E727B5A0E8FC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_pci.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -5607,7 +5607,7 @@ static const struct pci_device_id serial
 	{	PCI_VENDOR_ID_INTASHIELD, 0x4015,
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
-		pbn_oxsemi_4_15625000 },
+		pbn_oxsemi_2_15625000 },
 	/*
 	 * Brainboxes PX-260/PX-701
 	 */

[PATCH 5.15 123/128] tty: 8250: Fix up PX-803/PX-857

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cameron Williams <cang1@live.co.uk>

commit ee61337b934c99c2611e0a945d592019b2e00c82 upstream.

The PX-803/PX-857 are variants of each other, add a note.
Additionally fix up the port counts for the card (2, not 1).

Fixes: ef5a03a26c87 ("tty: 8250: Add support for Brainboxes PX cards.")
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB789978C8ED872FB4B014E132C4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_pci.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -5662,16 +5662,16 @@ static const struct pci_device_id serial
 		0, 0,
 		pbn_oxsemi_4_15625000 },
 	/*
-	 * Brainboxes PX-803
+	 * Brainboxes PX-803/PX-857
 	 */
 	{	PCI_VENDOR_ID_INTASHIELD, 0x4009,
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
-		pbn_b0_1_115200 },
+		pbn_b0_2_115200 },
 	{	PCI_VENDOR_ID_INTASHIELD, 0x401E,
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
-		pbn_oxsemi_1_15625000 },
+		pbn_oxsemi_2_15625000 },
 	/*
 	 * Brainboxes PX-846
 	 */

[PATCH 5.15 124/128] tty: 8250: Add support for additional Brainboxes PX cards

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cameron Williams <cang1@live.co.uk>

commit 9604884e592cd04ead024c9737c67a77f175cab9 upstream.

Add support for some more of the Brainboxes PX (PCIe) range
of serial cards, namely
PX-275/PX-279, PX-475 (serial port, not LPT), PX-820,
PX-803/PX-857 (additional ID).

Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB78996BEC353FB346FC35444BC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_pci.c |   29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -5616,6 +5616,13 @@ static const struct pci_device_id serial
 		0, 0,
 		pbn_oxsemi_4_15625000 },
 	/*
+	 * Brainboxes PX-275/279
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0E41,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_8_115200 },
+	/*
 	 * Brainboxes PX-310
 	 */
 	{	PCI_VENDOR_ID_INTASHIELD, 0x400E,
@@ -5662,17 +5669,39 @@ static const struct pci_device_id serial
 		0, 0,
 		pbn_oxsemi_4_15625000 },
 	/*
+	 * Brainboxes PX-475
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x401D,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_1_15625000 },
+	/*
 	 * Brainboxes PX-803/PX-857
 	 */
 	{	PCI_VENDOR_ID_INTASHIELD, 0x4009,
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
 		pbn_b0_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x4018,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_2_15625000 },
 	{	PCI_VENDOR_ID_INTASHIELD, 0x401E,
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
 		pbn_oxsemi_2_15625000 },
 	/*
+	 * Brainboxes PX-820
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x4002,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b0_4_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x4013,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_4_15625000 },
+	/*
 	 * Brainboxes PX-846
 	 */
 	{	PCI_VENDOR_ID_INTASHIELD, 0x4008,

[PATCH 5.15 125/128] tty: 8250: Add support for Intashield IX cards

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cameron Williams <cang1@live.co.uk>

commit 62d2ec2ded278c7512d91ca7bf8eb9bac46baf90 upstream.

Add support for the IX-100, IX-200 and IX-400 serial cards.

Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB7899614E5837E82A03272A4BC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_pci.c |   21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -5358,6 +5358,27 @@ static const struct pci_device_id serial
 	{	PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,    /* 135a.0dc0 */
 		pbn_b2_4_115200 },
+	/*
+	 * IntaShield IX-100
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x4027,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_1_15625000 },
+	/*
+	 * IntaShield IX-200
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x4028,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_2_15625000 },
+	/*
+	 * IntaShield IX-400
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x4029,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_4_15625000 },
 	/* Brainboxes Devices */
 	/*
 	* Brainboxes UC-101

[PATCH 5.15 126/128] tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cameron Williams <cang1@live.co.uk>

commit e4876dacaca46a1b09f9b417480924ab12019a5b upstream.

Some of the later revisions of the Brainboxes PX cards are based
on the Oxford Semiconductor chipset. Due to the chip's unique setup
these cards need to be initialised.
Previously these were tested against a reference card with the same broken
baudrate on another PC, cancelling out the effect. With this patch they
work and can transfer/receive find against an FTDI-based device.

Add all of the cards which require this setup to the quirks table.
Thanks to Maciej W. Rozycki for clarification on this chip.

Fixes: ef5a03a26c87 ("tty: 8250: Add support for Brainboxes PX cards.")
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB7899D222A4AB2A4E8C57108FC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_pci.c |  147 +++++++++++++++++++++++++++++++++++++
 1 file changed, 147 insertions(+)

--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -2719,6 +2719,153 @@ static struct pci_serial_quirk pci_seria
 		.init			= pci_oxsemi_tornado_init,
 		.setup		= pci_oxsemi_tornado_setup,
 	},
+	/*
+	 * Brainboxes devices - all Oxsemi based
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x4027,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x4028,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x4029,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x4019,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x4016,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x4015,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x400A,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x400E,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x400C,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x400B,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x400F,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x4010,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x4011,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x401D,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x401E,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x4013,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x4017,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x4018,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
 	{
 		.vendor         = PCI_VENDOR_ID_INTEL,
 		.device         = 0x8811,

[PATCH 5.15 127/128] misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Siddharth Vadapalli <s-vadapalli@ti.com>

commit 8293703a492ae97c86af27c75b76e6239ec86483 upstream.

Add DEVICE_ID for J721S2 and enable support for endpoints configured
with this DEVICE_ID in the pci_endpoint_test driver.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Cc: stable <stable@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231020120248.3168406-1-s-vadapalli@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/misc/pci_endpoint_test.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/misc/pci_endpoint_test.c
+++ b/drivers/misc/pci_endpoint_test.c
@@ -71,6 +71,7 @@
 #define PCI_DEVICE_ID_TI_AM654			0xb00c
 #define PCI_DEVICE_ID_TI_J7200			0xb00f
 #define PCI_DEVICE_ID_TI_AM64			0xb010
+#define PCI_DEVICE_ID_TI_J721S2		0xb013
 #define PCI_DEVICE_ID_LS1088A			0x80c0
 
 #define is_am654_pci_dev(pdev)		\
@@ -1004,6 +1005,9 @@ static const struct pci_device_id pci_en
 	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_AM64),
 	  .driver_data = (kernel_ulong_t)&j721e_data,
 	},
+	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_J721S2),
+	  .driver_data = (kernel_ulong_t)&j721e_data,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(pci, pci_endpoint_test_tbl);

[PATCH 5.15 128/128] ALSA: hda: intel-dsp-config: Fix JSL Chromebook quirk detection

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Hasemeyer <markhas@chromium.org>

commit 7c05b44e1a50d9cbfc4f731dddc436a24ddc129a upstream.

Some Jasperlake Chromebooks overwrite the system vendor DMI value to the
name of the OEM that manufactured the device. This breaks Chromebook
quirk detection as it expects the system vendor to be "Google".

Add another quirk detection entry that looks for "Google" in the BIOS
version.

Cc: stable@vger.kernel.org
Signed-off-by: Mark Hasemeyer <markhas@chromium.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231018235944.1860717-1-markhas@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/hda/intel-dsp-config.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/sound/hda/intel-dsp-config.c
+++ b/sound/hda/intel-dsp-config.c
@@ -330,6 +330,12 @@ static const struct config_entry config_
 					DMI_MATCH(DMI_SYS_VENDOR, "Google"),
 				}
 			},
+			{
+				.ident = "Google firmware",
+				.matches = {
+					DMI_MATCH(DMI_BIOS_VERSION, "Google"),
+				}
+			},
 			{}
 		}
 	},

Re: [PATCH 5.15 000/128] 5.15.138-rc1 review

[Harshit Mogalapalli]

Hello Greg,

On 06/11/23 6:32 pm, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.138 release.
> There are 128 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 08 Nov 2023 13:02:46 +0000.
> Anything received after that time might be too late.
> 

I am seeing a build failure with perf:

tools/perf/util/evlist.c: In function evlist__add_aux_dummy:
tools/perf/util/evlist.c:266:31: error: implicit declaration of function 
evlist__dummy_event; did you mean evlist__add_sb_event’? 
[-Werror=implicit-function-declaration]
   266 |         struct evsel *evsel = evlist__dummy_event(evlist);
       |                               ^~~~~~~~~~~~~~~~~~~
       |                               evlist__add_sb_event


I think we should drop these three commits:

20a5799cae7dc perf evlist: Avoid frequency mode for the dummy event
7de783c81c7e7 perf tools: Get rid of evlist__add_on_all_cpus()
141ce9207068e perf evlist: Add evlist__add_dummy_on_all_cpus()

Backport was requested here:
https://lore.kernel.org/stable/CAL715WLTjMGQrhm6wWqFSeL_Oq-HzoQd5CqewvLRLv0Xbnibgw@mail.gmail.com/


Thanks,
Harshit

> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.138-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

Re: [PATCH 5.15 000/128] 5.15.138-rc1 review

[Allen Pais]

>
> On 06/11/23 6:32 pm, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.15.138 release.
> > There are 128 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Wed, 08 Nov 2023 13:02:46 +0000.
> > Anything received after that time might be too late.
> >
>
> I am seeing a build failure with perf:
>
> tools/perf/util/evlist.c: In function evlist__add_aux_dummy:
> tools/perf/util/evlist.c:266:31: error: implicit declaration of function
> evlist__dummy_event; did you mean evlist__add_sb_event’?
> [-Werror=implicit-function-declaration]
>    266 |         struct evsel *evsel = evlist__dummy_event(evlist);
>        |                               ^~~~~~~~~~~~~~~~~~~
>        |                               evlist__add_sb_event
>
>
> I think we should drop these three commits:
>
> 20a5799cae7dc perf evlist: Avoid frequency mode for the dummy event
> 7de783c81c7e7 perf tools: Get rid of evlist__add_on_all_cpus()
> 141ce9207068e perf evlist: Add evlist__add_dummy_on_all_cpus()
>
> Backport was requested here:
> https://lore.kernel.org/stable/CAL715WLTjMGQrhm6wWqFSeL_Oq-HzoQd5CqewvLRLv0Xbnibgw@mail.gmail.com/
>


 Just tested perf build, I see the same errors:

tools/perf/util/evlist.c: In function 'evlist__add_aux_dummy':
/linux/tools/perf/util/evlist.c:266:24: error: implicit declaration of
function 'evlist__dummy_event'; did you mean 'evlist__add_sb_event'?
[-Werror=implicit-function-declaration]
  struct evsel *evsel = evlist__dummy_event(evlist);
                        ^~~~~~~~~~~~~~~~~~~
                        evlist__add_sb_event
linux/tools/perf/util/evlist.c:266:24: error: initialization makes
pointer from integer without a cast [-Werror=int-conversion]

Thanks,
Allen

Re: [PATCH 5.15 000/128] 5.15.138-rc1 review

[SeongJae Park]

Hello,

On Mon, 6 Nov 2023 14:02:40 +0100 Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:

> This is the start of the stable review cycle for the 5.15.138 release.
> There are 128 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 08 Nov 2023 13:02:46 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.138-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.

This rc kernel passes DAMON functionality test[1] on my test machine.
Attaching the test results summary below.  Please note that I retrieved the
kernel from linux-stable-rc tree[2].

Tested-by: SeongJae Park <sj@kernel.org>

[1] https://github.com/awslabs/damon-tests/tree/next/corr
[2] ec134bfabca0 ("Linux 5.15.138-rc1")

Thanks,
SJ

[...]

---

ok 1 selftests: damon: debugfs_attrs.sh
ok 1 selftests: damon-tests: kunit.sh
ok 2 selftests: damon-tests: huge_count_read_write.sh
ok 3 selftests: damon-tests: buffer_overflow.sh
ok 4 selftests: damon-tests: rm_contexts.sh
ok 5 selftests: damon-tests: record_null_deref.sh
ok 6 selftests: damon-tests: dbgfs_target_ids_read_before_terminate_race.sh
ok 7 selftests: damon-tests: dbgfs_target_ids_pid_leak.sh
ok 8 selftests: damon-tests: damo_tests.sh
ok 9 selftests: damon-tests: masim-record.sh
ok 10 selftests: damon-tests: build_i386.sh
ok 11 selftests: damon-tests: build_arm64.sh
ok 12 selftests: damon-tests: build_i386_idle_flag.sh
ok 13 selftests: damon-tests: build_i386_highpte.sh
ok 14 selftests: damon-tests: build_nomemcg.sh
 [33m
 [92mPASS [39m

Re: [PATCH 5.15 000/128] 5.15.138-rc1 review

[Florian Fainelli]

On 11/6/23 09:08, Allen Pais wrote:
>>
>> On 06/11/23 6:32 pm, Greg Kroah-Hartman wrote:
>>> This is the start of the stable review cycle for the 5.15.138 release.
>>> There are 128 patches in this series, all will be posted as a response
>>> to this one.  If anyone has any issues with these being applied, please
>>> let me know.
>>>
>>> Responses should be made by Wed, 08 Nov 2023 13:02:46 +0000.
>>> Anything received after that time might be too late.
>>>
>>
>> I am seeing a build failure with perf:
>>
>> tools/perf/util/evlist.c: In function evlist__add_aux_dummy:
>> tools/perf/util/evlist.c:266:31: error: implicit declaration of function
>> evlist__dummy_event; did you mean evlist__add_sb_event’?
>> [-Werror=implicit-function-declaration]
>>     266 |         struct evsel *evsel = evlist__dummy_event(evlist);
>>         |                               ^~~~~~~~~~~~~~~~~~~
>>         |                               evlist__add_sb_event
>>
>>
>> I think we should drop these three commits:
>>
>> 20a5799cae7dc perf evlist: Avoid frequency mode for the dummy event
>> 7de783c81c7e7 perf tools: Get rid of evlist__add_on_all_cpus()
>> 141ce9207068e perf evlist: Add evlist__add_dummy_on_all_cpus()
>>
>> Backport was requested here:
>> https://lore.kernel.org/stable/CAL715WLTjMGQrhm6wWqFSeL_Oq-HzoQd5CqewvLRLv0Xbnibgw@mail.gmail.com/
>>
> 
> 
>   Just tested perf build, I see the same errors:
> 
> tools/perf/util/evlist.c: In function 'evlist__add_aux_dummy':
> /linux/tools/perf/util/evlist.c:266:24: error: implicit declaration of
> function 'evlist__dummy_event'; did you mean 'evlist__add_sb_event'?
> [-Werror=implicit-function-declaration]
>    struct evsel *evsel = evlist__dummy_event(evlist);
>                          ^~~~~~~~~~~~~~~~~~~
>                          evlist__add_sb_event
> linux/tools/perf/util/evlist.c:266:24: error: initialization makes
> pointer from integer without a cast [-Werror=int-conversion]

Yep, same here (and on 5.10 as well).
-- 
Florian

Re: [PATCH 5.15 000/128] 5.15.138-rc1 review

[Ron Economos]

On 11/6/23 5:02 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.138 release.
> There are 128 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 08 Nov 2023 13:02:46 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.138-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).

Tested-by: Ron Economos <re@w6rz.net>

Re: [PATCH 5.15 000/128] 5.15.138-rc1 review

[Jon Hunter]

On Mon, 06 Nov 2023 14:02:40 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.138 release.
> There are 128 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 08 Nov 2023 13:02:46 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.138-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v5.15:
    10 builds:	10 pass, 0 fail
    26 boots:	26 pass, 0 fail
    102 tests:	102 pass, 0 fail

Linux version:	5.15.138-rc1-gec134bfabca0
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 5.15 000/128] 5.15.138-rc1 review

[Harshit Mogalapalli]

Hi Greg,

On 06/11/23 8:24 pm, Harshit Mogalapalli wrote:
> Hello Greg,
> 
> On 06/11/23 6:32 pm, Greg Kroah-Hartman wrote:
>> This is the start of the stable review cycle for the 5.15.138 release.
>> There are 128 patches in this series, all will be posted as a response
>> to this one.  If anyone has any issues with these being applied, please
>> let me know.
>>
>> Responses should be made by Wed, 08 Nov 2023 13:02:46 +0000.
>> Anything received after that time might be too late.
>>
> 
> I am seeing a build failure with perf:
> 
> tools/perf/util/evlist.c: In function evlist__add_aux_dummy:
> tools/perf/util/evlist.c:266:31: error: implicit declaration of function 
> evlist__dummy_event; did you mean evlist__add_sb_event’? 
> [-Werror=implicit-function-declaration]
>    266 |         struct evsel *evsel = evlist__dummy_event(evlist);
>        |                               ^~~~~~~~~~~~~~~~~~~
>        |                               evlist__add_sb_event
> 
> 
> I think we should drop these three commits:
> 
> 20a5799cae7dc perf evlist: Avoid frequency mode for the dummy event
> 7de783c81c7e7 perf tools: Get rid of evlist__add_on_all_cpus()
> 141ce9207068e perf evlist: Add evlist__add_dummy_on_all_cpus()
> 

I have reverted these three commits locally and triggered the tests.

No problems seen on x86_64 and aarch64 with our testing.

Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>

Thanks,
Harshit


> Backport was requested here:
> https://lore.kernel.org/stable/CAL715WLTjMGQrhm6wWqFSeL_Oq-HzoQd5CqewvLRLv0Xbnibgw@mail.gmail.com/
> 
> 
> Thanks,
> Harshit
> 
>> The whole patch series can be found in one patch at:
>>     https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.138-rc1.gz
>> or in the git tree and branch at:
>>     git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
>> and the diffstat can be found below.
>>
>> thanks,
>>
>> greg k-h

Re: [PATCH 5.15 000/128] 5.15.138-rc1 review

[Shuah Khan]

On 11/6/23 06:02, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.138 release.
> There are 128 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 08 Nov 2023 13:02:46 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.138-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 5.15 000/128] 5.15.138-rc1 review

[Ricardo B. Marliere]

On 23/11/06 02:02PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.138 release.
> There are 128 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 08 Nov 2023 13:02:46 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.138-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

No regressions on my system.

Tested-by: Ricardo B. Marliere <ricardo@marliere.net>

Thank you.

Re: [PATCH 5.15 000/128] 5.15.138-rc1 review

[Naresh Kamboju]

On Mon, 6 Nov 2023 at 18:54, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.15.138 release.
> There are 128 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 08 Nov 2023 13:02:46 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.138-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h


Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 5.15.138-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.15.y
* git commit: ec134bfabca018727b246a05cbd7d2da66864974
* git describe: v5.15.137-129-gec134bfabca0
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.15.y/build/v5.15.137-129-gec134bfabca0

## Test Regressions (compared to v5.15.137)

## Metric Regressions (compared to v5.15.137)

## Test Fixes (compared to v5.15.137)

## Metric Fixes (compared to v5.15.137)

## Test result summary
total: 90364, pass: 72614, fail: 2502, skip: 15189, xfail: 59

## Build Summary
* arc: 5 total, 5 passed, 0 failed
* arm: 111 total, 111 passed, 0 failed
* arm64: 43 total, 43 passed, 0 failed
* i386: 34 total, 34 passed, 0 failed
* mips: 23 total, 23 passed, 0 failed
* parisc: 4 total, 4 passed, 0 failed
* powerpc: 25 total, 25 passed, 0 failed
* riscv: 11 total, 11 passed, 0 failed
* s390: 11 total, 11 passed, 0 failed
* sh: 9 total, 9 passed, 0 failed
* sparc: 8 total, 8 passed, 0 failed
* x86_64: 37 total, 37 passed, 0 failed

## Test suites summary
* boot
* kselftest-android
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers-dma-buf
* kselftest-efivarfs
* kselftest-exec
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-filesystems-epoll
* kselftest-firmware
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-net-forwarding
* kselftest-net-mptcp
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-user_events
* kselftest-vDSO
* kselftest-vm
* kselftest-watchdog
* kselftest-x86
* kselftest-zram
* kunit
* libgpiod
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* perf
* rcutorture
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.15 000/128] 5.15.138-rc1 review

[Guenter Roeck]

On Mon, Nov 06, 2023 at 02:02:40PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.138 release.
> There are 128 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 08 Nov 2023 13:02:46 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 160 pass: 158 fail: 2
Failed builds:
	i386:tools/perf
	x86_64:tools/perf
Qemu test results:
	total: 509 pass: 509 fail: 0

The perf build failures have already been reported, so I won't go
into detail.

Guenter

Re: [PATCH 5.15 000/128] 5.15.138-rc1 review

[Greg Kroah-Hartman]

On Mon, Nov 06, 2023 at 08:24:43PM +0530, Harshit Mogalapalli wrote:
> Hello Greg,
> 
> On 06/11/23 6:32 pm, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.15.138 release.
> > There are 128 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Wed, 08 Nov 2023 13:02:46 +0000.
> > Anything received after that time might be too late.
> > 
> 
> I am seeing a build failure with perf:
> 
> tools/perf/util/evlist.c: In function evlist__add_aux_dummy:
> tools/perf/util/evlist.c:266:31: error: implicit declaration of function
> evlist__dummy_event; did you mean evlist__add_sb_event’?
> [-Werror=implicit-function-declaration]
>   266 |         struct evsel *evsel = evlist__dummy_event(evlist);
>       |                               ^~~~~~~~~~~~~~~~~~~
>       |                               evlist__add_sb_event
> 
> 
> I think we should drop these three commits:
> 
> 20a5799cae7dc perf evlist: Avoid frequency mode for the dummy event
> 7de783c81c7e7 perf tools: Get rid of evlist__add_on_all_cpus()
> 141ce9207068e perf evlist: Add evlist__add_dummy_on_all_cpus()

Thanks, I've dropped all of these from 5.15.y and 5.10.y now.

greg k-h