From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: "Geoffrey D. Bennett" <g@b4.vu>,
Philippe Perrot <philippe@perrot-net.fr>,
Takashi Iwai <tiwai@suse.de>, Sasha Levin <sashal@kernel.org>,
perex@perex.cz, tiwai@suse.com, peter.ujfalusi@linux.intel.com,
linux-sound@vger.kernel.org
Subject: [PATCH AUTOSEL 6.6 07/36] ALSA: scarlett2: Move USB IDs out from device_info struct
Date: Tue, 7 Nov 2023 10:45:49 -0500 [thread overview]
Message-ID: <20231107154654.3765336-7-sashal@kernel.org> (raw)
In-Reply-To: <20231107154654.3765336-1-sashal@kernel.org>
From: "Geoffrey D. Bennett" <g@b4.vu>
[ Upstream commit d98cc489029dba4d99714c2e8ec4f5ba249f6851 ]
By moving the USB IDs from the device_info struct into
scarlett2_devices[], that will allow for devices with different
USB IDs to share the same device_info.
Tested-by: Philippe Perrot <philippe@perrot-net.fr>
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/8263368e8d49e6fcebc709817bd82ab79b404468.1694705811.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/usb/mixer_scarlett_gen2.c | 63 ++++++++++++---------------------
1 file changed, 23 insertions(+), 40 deletions(-)
diff --git a/sound/usb/mixer_scarlett_gen2.c b/sound/usb/mixer_scarlett_gen2.c
index d260be8cb6bc0..606dc6b5cedf9 100644
--- a/sound/usb/mixer_scarlett_gen2.c
+++ b/sound/usb/mixer_scarlett_gen2.c
@@ -317,8 +317,6 @@ struct scarlett2_mux_entry {
};
struct scarlett2_device_info {
- u32 usb_id; /* USB device identifier */
-
/* Gen 3 devices have an internal MSD mode switch that needs
* to be disabled in order to access the full functionality of
* the device.
@@ -440,8 +438,6 @@ struct scarlett2_data {
/*** Model-specific data ***/
static const struct scarlett2_device_info s6i6_gen2_info = {
- .usb_id = USB_ID(0x1235, 0x8203),
-
.config_set = SCARLETT2_CONFIG_SET_GEN_2,
.level_input_count = 2,
.pad_input_count = 2,
@@ -486,8 +482,6 @@ static const struct scarlett2_device_info s6i6_gen2_info = {
};
static const struct scarlett2_device_info s18i8_gen2_info = {
- .usb_id = USB_ID(0x1235, 0x8204),
-
.config_set = SCARLETT2_CONFIG_SET_GEN_2,
.level_input_count = 2,
.pad_input_count = 4,
@@ -535,8 +529,6 @@ static const struct scarlett2_device_info s18i8_gen2_info = {
};
static const struct scarlett2_device_info s18i20_gen2_info = {
- .usb_id = USB_ID(0x1235, 0x8201),
-
.config_set = SCARLETT2_CONFIG_SET_GEN_2,
.line_out_hw_vol = 1,
@@ -589,8 +581,6 @@ static const struct scarlett2_device_info s18i20_gen2_info = {
};
static const struct scarlett2_device_info solo_gen3_info = {
- .usb_id = USB_ID(0x1235, 0x8211),
-
.has_msd_mode = 1,
.config_set = SCARLETT2_CONFIG_SET_NO_MIXER,
.level_input_count = 1,
@@ -602,8 +592,6 @@ static const struct scarlett2_device_info solo_gen3_info = {
};
static const struct scarlett2_device_info s2i2_gen3_info = {
- .usb_id = USB_ID(0x1235, 0x8210),
-
.has_msd_mode = 1,
.config_set = SCARLETT2_CONFIG_SET_NO_MIXER,
.level_input_count = 2,
@@ -614,8 +602,6 @@ static const struct scarlett2_device_info s2i2_gen3_info = {
};
static const struct scarlett2_device_info s4i4_gen3_info = {
- .usb_id = USB_ID(0x1235, 0x8212),
-
.has_msd_mode = 1,
.config_set = SCARLETT2_CONFIG_SET_GEN_3,
.level_input_count = 2,
@@ -660,8 +646,6 @@ static const struct scarlett2_device_info s4i4_gen3_info = {
};
static const struct scarlett2_device_info s8i6_gen3_info = {
- .usb_id = USB_ID(0x1235, 0x8213),
-
.has_msd_mode = 1,
.config_set = SCARLETT2_CONFIG_SET_GEN_3,
.level_input_count = 2,
@@ -713,8 +697,6 @@ static const struct scarlett2_device_info s8i6_gen3_info = {
};
static const struct scarlett2_device_info s18i8_gen3_info = {
- .usb_id = USB_ID(0x1235, 0x8214),
-
.has_msd_mode = 1,
.config_set = SCARLETT2_CONFIG_SET_GEN_3,
.line_out_hw_vol = 1,
@@ -783,8 +765,6 @@ static const struct scarlett2_device_info s18i8_gen3_info = {
};
static const struct scarlett2_device_info s18i20_gen3_info = {
- .usb_id = USB_ID(0x1235, 0x8215),
-
.has_msd_mode = 1,
.config_set = SCARLETT2_CONFIG_SET_GEN_3,
.line_out_hw_vol = 1,
@@ -848,8 +828,6 @@ static const struct scarlett2_device_info s18i20_gen3_info = {
};
static const struct scarlett2_device_info clarett_8pre_info = {
- .usb_id = USB_ID(0x1235, 0x820c),
-
.config_set = SCARLETT2_CONFIG_SET_CLARETT,
.line_out_hw_vol = 1,
.level_input_count = 2,
@@ -902,25 +880,30 @@ static const struct scarlett2_device_info clarett_8pre_info = {
} },
};
-static const struct scarlett2_device_info *scarlett2_devices[] = {
+struct scarlett2_device_entry {
+ const u32 usb_id; /* USB device identifier */
+ const struct scarlett2_device_info *info;
+};
+
+static const struct scarlett2_device_entry scarlett2_devices[] = {
/* Supported Gen 2 devices */
- &s6i6_gen2_info,
- &s18i8_gen2_info,
- &s18i20_gen2_info,
+ { USB_ID(0x1235, 0x8203), &s6i6_gen2_info },
+ { USB_ID(0x1235, 0x8204), &s18i8_gen2_info },
+ { USB_ID(0x1235, 0x8201), &s18i20_gen2_info },
/* Supported Gen 3 devices */
- &solo_gen3_info,
- &s2i2_gen3_info,
- &s4i4_gen3_info,
- &s8i6_gen3_info,
- &s18i8_gen3_info,
- &s18i20_gen3_info,
+ { USB_ID(0x1235, 0x8211), &solo_gen3_info },
+ { USB_ID(0x1235, 0x8210), &s2i2_gen3_info },
+ { USB_ID(0x1235, 0x8212), &s4i4_gen3_info },
+ { USB_ID(0x1235, 0x8213), &s8i6_gen3_info },
+ { USB_ID(0x1235, 0x8214), &s18i8_gen3_info },
+ { USB_ID(0x1235, 0x8215), &s18i20_gen3_info },
/* Supported Clarett+ devices */
- &clarett_8pre_info,
+ { USB_ID(0x1235, 0x820c), &clarett_8pre_info },
/* End of list */
- NULL
+ { 0, NULL },
};
/* get the starting port index number for a given port type/direction */
@@ -4072,17 +4055,17 @@ static int scarlett2_init_notify(struct usb_mixer_interface *mixer)
static int snd_scarlett_gen2_controls_create(struct usb_mixer_interface *mixer)
{
- const struct scarlett2_device_info **info = scarlett2_devices;
+ const struct scarlett2_device_entry *entry = scarlett2_devices;
int err;
- /* Find device in scarlett2_devices */
- while (*info && (*info)->usb_id != mixer->chip->usb_id)
- info++;
- if (!*info)
+ /* Find entry in scarlett2_devices */
+ while (entry->usb_id && entry->usb_id != mixer->chip->usb_id)
+ entry++;
+ if (!entry->usb_id)
return -EINVAL;
/* Initialise private data */
- err = scarlett2_init_private(mixer, *info);
+ err = scarlett2_init_private(mixer, entry->info);
if (err < 0)
return err;
--
2.42.0
next prev parent reply other threads:[~2023-11-07 15:47 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-07 15:45 [PATCH AUTOSEL 6.6 01/36] ASoC: mediatek: mt8188-mt6359: support dynamic pinctrl Sasha Levin
2023-11-07 15:45 ` [PATCH AUTOSEL 6.6 02/36] ASoC: soc-card: Add storage for PCI SSID Sasha Levin
2023-11-07 15:45 ` [PATCH AUTOSEL 6.6 03/36] ASoC: SOF: Pass PCI SSID to machine driver Sasha Levin
2023-11-07 15:45 ` [PATCH AUTOSEL 6.6 04/36] ASoC: Intel: sof_sdw: Copy PCI SSID to struct snd_soc_card Sasha Levin
2023-11-07 15:45 ` [PATCH AUTOSEL 6.6 05/36] ASoC: cs35l56: Use PCI SSID as the firmware UID Sasha Levin
2023-11-07 15:45 ` [PATCH AUTOSEL 6.6 06/36] crypto: pcrypt - Fix hungtask for PADATA_RESET Sasha Levin
2023-11-07 15:45 ` Sasha Levin [this message]
2023-11-07 15:45 ` [PATCH AUTOSEL 6.6 08/36] ASoC: SOF: ipc4: handle EXCEPTION_CAUGHT notification from firmware Sasha Levin
2023-11-07 15:45 ` [PATCH AUTOSEL 6.6 09/36] RDMA/hfi1: Use FIELD_GET() to extract Link Width Sasha Levin
2023-11-07 15:45 ` [PATCH AUTOSEL 6.6 10/36] scsi: hisi_sas: Set debugfs_dir pointer to NULL after removing debugfs Sasha Levin
2023-11-07 15:45 ` [PATCH AUTOSEL 6.6 11/36] scsi: ibmvfc: Remove BUG_ON in the case of an empty event pool Sasha Levin
2023-11-07 15:45 ` [PATCH AUTOSEL 6.6 12/36] fs/jfs: Add check for negative db_l2nbperpage Sasha Levin
2023-11-07 15:45 ` [PATCH AUTOSEL 6.6 13/36] fs/jfs: Add validity check for db_maxag and db_agpref Sasha Levin
2023-11-07 15:45 ` [PATCH AUTOSEL 6.6 14/36] jfs: fix array-index-out-of-bounds in dbFindLeaf Sasha Levin
2023-11-07 15:45 ` [PATCH AUTOSEL 6.6 15/36] jfs: fix array-index-out-of-bounds in diAlloc Sasha Levin
2023-11-07 15:45 ` [PATCH AUTOSEL 6.6 16/36] HID: lenovo: Detect quirk-free fw on cptkbd and stop applying workaround Sasha Levin
2023-11-07 15:45 ` [PATCH AUTOSEL 6.6 17/36] ARM: 9320/1: fix stack depot IRQ stack filter Sasha Levin
2023-11-07 15:46 ` [PATCH AUTOSEL 6.6 18/36] ALSA: hda: Fix possible null-ptr-deref when assigning a stream Sasha Levin
2023-11-07 15:46 ` [PATCH AUTOSEL 6.6 19/36] gpiolib: of: Add quirk for mt2701-cs42448 ASoC sound Sasha Levin
2023-11-07 15:46 ` [PATCH AUTOSEL 6.6 20/36] PCI: tegra194: Use FIELD_GET()/FIELD_PREP() with Link Width fields Sasha Levin
2023-11-07 15:46 ` [PATCH AUTOSEL 6.6 21/36] PCI: mvebu: Use FIELD_PREP() with Link Width Sasha Levin
2023-11-07 15:46 ` [PATCH AUTOSEL 6.6 22/36] atm: iphase: Do PCI error checks on own line Sasha Levin
2023-11-07 15:46 ` [PATCH AUTOSEL 6.6 23/36] PCI: Do error check on own line to split long "if" conditions Sasha Levin
2023-11-07 15:46 ` [PATCH AUTOSEL 6.6 24/36] scsi: libfc: Fix potential NULL pointer dereference in fc_lport_ptp_setup() Sasha Levin
2023-11-07 15:46 ` [PATCH AUTOSEL 6.6 25/36] PCI: Use FIELD_GET() to extract Link Width Sasha Levin
2023-11-07 15:46 ` [PATCH AUTOSEL 6.6 26/36] PCI: Extract ATS disabling to a helper function Sasha Levin
2023-11-07 15:46 ` [PATCH AUTOSEL 6.6 27/36] PCI: Disable ATS for specific Intel IPU E2000 devices Sasha Levin
2023-11-07 15:46 ` [PATCH AUTOSEL 6.6 28/36] PCI: dwc: Add dw_pcie_link_set_max_link_width() Sasha Levin
2023-11-07 15:46 ` [PATCH AUTOSEL 6.6 29/36] PCI: dwc: Add missing PCI_EXP_LNKCAP_MLW handling Sasha Levin
2023-11-07 15:46 ` [PATCH AUTOSEL 6.6 30/36] misc: pci_endpoint_test: Add Device ID for R-Car S4-8 PCIe controller Sasha Levin
2023-11-07 15:46 ` [PATCH AUTOSEL 6.6 31/36] PCI: Use FIELD_GET() in Sapphire RX 5600 XT Pulse quirk Sasha Levin
2023-11-07 15:46 ` [PATCH AUTOSEL 6.6 32/36] ASoC: Intel: soc-acpi-cht: Add Lenovo Yoga Tab 3 Pro YT3-X90 quirk Sasha Levin
2023-11-07 15:46 ` [PATCH AUTOSEL 6.6 33/36] crypto: hisilicon/qm - prevent soft lockup in receive loop Sasha Levin
2023-11-07 15:46 ` [PATCH AUTOSEL 6.6 34/36] HID: Add quirk for Dell Pro Wireless Keyboard and Mouse KM5221W Sasha Levin
2023-11-07 15:46 ` [PATCH AUTOSEL 6.6 35/36] exfat: support handle zero-size directory Sasha Levin
2023-11-07 15:46 ` [PATCH AUTOSEL 6.6 36/36] mfd: intel-lpss: Add Intel Lunar Lake-M PCI IDs Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231107154654.3765336-7-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=g@b4.vu \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=peter.ujfalusi@linux.intel.com \
--cc=philippe@perrot-net.fr \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox