[PATCH AUTOSEL 5.15 1/4] i3c: mipi-i3c-hci: Fix out of bounds access in hci_dma_irq_handler

[PATCH AUTOSEL 5.15 1/4] i3c: mipi-i3c-hci: Fix out of bounds access in hci_dma_irq_handler

[Sasha Levin]

From: Jarkko Nikula <jarkko.nikula@linux.intel.com>

[ Upstream commit 45a832f989e520095429589d5b01b0c65da9b574 ]

Do not loop over ring headers in hci_dma_irq_handler() that are not
allocated and enabled in hci_dma_init(). Otherwise out of bounds access
will occur from rings->headers[i] access when i >= number of allocated
ring headers.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20230921055704.1087277-5-jarkko.nikula@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i3c/master/mipi-i3c-hci/dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i3c/master/mipi-i3c-hci/dma.c b/drivers/i3c/master/mipi-i3c-hci/dma.c
index af873a9be0507..dd2dc00399600 100644
--- a/drivers/i3c/master/mipi-i3c-hci/dma.c
+++ b/drivers/i3c/master/mipi-i3c-hci/dma.c
@@ -734,7 +734,7 @@ static bool hci_dma_irq_handler(struct i3c_hci *hci, unsigned int mask)
 	unsigned int i;
 	bool handled = false;
 
-	for (i = 0; mask && i < 8; i++) {
+	for (i = 0; mask && i < rings->total; i++) {
 		struct hci_rh_data *rh;
 		u32 status;
 
-- 
2.42.0

[PATCH AUTOSEL 5.15 2/4] i2c: sun6i-p2wi: Prevent potential division by zero

[Sasha Levin]

From: Axel Lin <axel.lin@ingics.com>

[ Upstream commit 5ac61d26b8baff5b2e5a9f3dc1ef63297e4b53e7 ]

Make sure we don't OOPS in case clock-frequency is set to 0 in a DT. The
variable set here is later used as a divisor.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-sun6i-p2wi.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/i2c/busses/i2c-sun6i-p2wi.c b/drivers/i2c/busses/i2c-sun6i-p2wi.c
index 9e3483f507ff5..f2ed13b551088 100644
--- a/drivers/i2c/busses/i2c-sun6i-p2wi.c
+++ b/drivers/i2c/busses/i2c-sun6i-p2wi.c
@@ -201,6 +201,11 @@ static int p2wi_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	if (clk_freq == 0) {
+		dev_err(dev, "clock-frequency is set to 0 in DT\n");
+		return -EINVAL;
+	}
+
 	if (of_get_child_count(np) > 1) {
 		dev_err(dev, "P2WI only supports one slave device\n");
 		return -EINVAL;
-- 
2.42.0

[PATCH AUTOSEL 5.15 3/4] virtio-blk: fix implicit overflow on virtio_max_dma_size

[Sasha Levin]

From: zhenwei pi <pizhenwei@bytedance.com>

[ Upstream commit fafb51a67fb883eb2dde352539df939a251851be ]

The following codes have an implicit conversion from size_t to u32:
(u32)max_size = (size_t)virtio_max_dma_size(vdev);

This may lead overflow, Ex (size_t)4G -> (u32)0. Once
virtio_max_dma_size() has a larger size than U32_MAX, use U32_MAX
instead.

Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230904061045.510460-1-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/virtio_blk.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index d2ba849bb8d19..affeca0dbc7ea 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -743,6 +743,7 @@ static int virtblk_probe(struct virtio_device *vdev)
 	u16 min_io_size;
 	u8 physical_block_exp, alignment_offset;
 	unsigned int queue_depth;
+	size_t max_dma_size;
 
 	if (!vdev->config->get) {
 		dev_err(&vdev->dev, "%s failure: config access disabled\n",
@@ -844,7 +845,8 @@ static int virtblk_probe(struct virtio_device *vdev)
 	/* No real sector limit. */
 	blk_queue_max_hw_sectors(q, -1U);
 
-	max_size = virtio_max_dma_size(vdev);
+	max_dma_size = virtio_max_dma_size(vdev);
+	max_size = max_dma_size > U32_MAX ? U32_MAX : max_dma_size;
 
 	/* Host can optionally specify maximum segment size and number of
 	 * segments. */
-- 
2.42.0

[PATCH AUTOSEL 5.15 4/4] i3c: master: mipi-i3c-hci: Fix a kernel panic for accessing DAT_data.

[Sasha Levin]

From: Billy Tsai <billy_tsai@aspeedtech.com>

[ Upstream commit b53e9758a31c683fc8615df930262192ed5f034b ]

The `i3c_master_bus_init` function may attach the I2C devices before the
I3C bus initialization. In this flow, the DAT `alloc_entry`` will be used
before the DAT `init`. Additionally, if the `i3c_master_bus_init` fails,
the DAT `cleanup` will execute before the device is detached, which will
execue DAT `free_entry` function. The above scenario can cause the driver
to use DAT_data when it is NULL.

Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20231023080237.560936-1-billy_tsai@aspeedtech.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i3c/master/mipi-i3c-hci/dat_v1.c | 29 ++++++++++++++++--------
 1 file changed, 19 insertions(+), 10 deletions(-)

diff --git a/drivers/i3c/master/mipi-i3c-hci/dat_v1.c b/drivers/i3c/master/mipi-i3c-hci/dat_v1.c
index 97bb49ff5b53b..47b9b4d4ed3fc 100644
--- a/drivers/i3c/master/mipi-i3c-hci/dat_v1.c
+++ b/drivers/i3c/master/mipi-i3c-hci/dat_v1.c
@@ -64,15 +64,17 @@ static int hci_dat_v1_init(struct i3c_hci *hci)
 		return -EOPNOTSUPP;
 	}
 
-	/* use a bitmap for faster free slot search */
-	hci->DAT_data = bitmap_zalloc(hci->DAT_entries, GFP_KERNEL);
-	if (!hci->DAT_data)
-		return -ENOMEM;
-
-	/* clear them */
-	for (dat_idx = 0; dat_idx < hci->DAT_entries; dat_idx++) {
-		dat_w0_write(dat_idx, 0);
-		dat_w1_write(dat_idx, 0);
+	if (!hci->DAT_data) {
+		/* use a bitmap for faster free slot search */
+		hci->DAT_data = bitmap_zalloc(hci->DAT_entries, GFP_KERNEL);
+		if (!hci->DAT_data)
+			return -ENOMEM;
+
+		/* clear them */
+		for (dat_idx = 0; dat_idx < hci->DAT_entries; dat_idx++) {
+			dat_w0_write(dat_idx, 0);
+			dat_w1_write(dat_idx, 0);
+		}
 	}
 
 	return 0;
@@ -87,7 +89,13 @@ static void hci_dat_v1_cleanup(struct i3c_hci *hci)
 static int hci_dat_v1_alloc_entry(struct i3c_hci *hci)
 {
 	unsigned int dat_idx;
+	int ret;
 
+	if (!hci->DAT_data) {
+		ret = hci_dat_v1_init(hci);
+		if (ret)
+			return ret;
+	}
 	dat_idx = find_first_zero_bit(hci->DAT_data, hci->DAT_entries);
 	if (dat_idx >= hci->DAT_entries)
 		return -ENOENT;
@@ -103,7 +111,8 @@ static void hci_dat_v1_free_entry(struct i3c_hci *hci, unsigned int dat_idx)
 {
 	dat_w0_write(dat_idx, 0);
 	dat_w1_write(dat_idx, 0);
-	__clear_bit(dat_idx, hci->DAT_data);
+	if (hci->DAT_data)
+		__clear_bit(dat_idx, hci->DAT_data);
 }
 
 static void hci_dat_v1_set_dynamic_addr(struct i3c_hci *hci,
-- 
2.42.0