FAILED: patch "[PATCH] i3c: master: svc: fix random hot join failure since timeout" failed to apply to 6.1-stable tree

FAILED: patch "[PATCH] i3c: master: svc: fix random hot join failure since timeout" failed to apply to 6.1-stable tree

[gregkh]

The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 9aaeef113c55248ecf3ab941c2e4460aaa8b8b9a
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2023112359-flint-lantern-833a@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..

Possible dependencies:

9aaeef113c55 ("i3c: master: svc: fix random hot join failure since timeout error")
49b472ebc61d ("i3c: master: svc: add NACK check after start byte sent")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 9aaeef113c55248ecf3ab941c2e4460aaa8b8b9a Mon Sep 17 00:00:00 2001
From: Frank Li <Frank.Li@nxp.com>
Date: Mon, 23 Oct 2023 12:16:58 -0400
Subject: [PATCH] i3c: master: svc: fix random hot join failure since timeout
 error
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

master side report:
  silvaco-i3c-master 44330000.i3c-master: Error condition: MSTATUS 0x020090c7, MERRWARN 0x00100000

BIT 20: TIMEOUT error
  The module has stalled too long in a frame. This happens when:
  - The TX FIFO or RX FIFO is not handled and the bus is stuck in the
middle of a message,
  - No STOP was issued and between messages,
  - IBI manual is used and no decision was made.
  The maximum stall period is 100 μs.

This can be considered as being just a warning as the system IRQ latency
can easily be greater than 100us.

Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver")
Cc:  <stable@vger.kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20231023161658.3890811-7-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c
index 18843e07d175..b192a8b91e5d 100644
--- a/drivers/i3c/master/svc-i3c-master.c
+++ b/drivers/i3c/master/svc-i3c-master.c
@@ -93,6 +93,7 @@
 #define SVC_I3C_MINTMASKED   0x098
 #define SVC_I3C_MERRWARN     0x09C
 #define   SVC_I3C_MERRWARN_NACK BIT(2)
+#define   SVC_I3C_MERRWARN_TIMEOUT BIT(20)
 #define SVC_I3C_MDMACTRL     0x0A0
 #define SVC_I3C_MDATACTRL    0x0AC
 #define   SVC_I3C_MDATACTRL_FLUSHTB BIT(0)
@@ -227,6 +228,14 @@ static bool svc_i3c_master_error(struct svc_i3c_master *master)
 	if (SVC_I3C_MSTATUS_ERRWARN(mstatus)) {
 		merrwarn = readl(master->regs + SVC_I3C_MERRWARN);
 		writel(merrwarn, master->regs + SVC_I3C_MERRWARN);
+
+		/* Ignore timeout error */
+		if (merrwarn & SVC_I3C_MERRWARN_TIMEOUT) {
+			dev_dbg(master->dev, "Warning condition: MSTATUS 0x%08x, MERRWARN 0x%08x\n",
+				mstatus, merrwarn);
+			return false;
+		}
+
 		dev_err(master->dev,
 			"Error condition: MSTATUS 0x%08x, MERRWARN 0x%08x\n",
 			mstatus, merrwarn);