public inbox for stable@vger.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: hau@realtek.com,hkallweit1@gmail.com,kuba@kernel.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] r8169: fix network lost after resume on DASH systems" failed to apply to 4.19-stable tree
Date: Fri, 24 Nov 2023 13:28:29 +0000	[thread overview]
Message-ID: <2023112429-echo-designer-9fef@gregkh> (raw)


The patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.19.y
git checkout FETCH_HEAD
git cherry-pick -x 868c3b95afef4883bfb66c9397482da6840b5baf
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2023112429-echo-designer-9fef@gregkh' --subject-prefix 'PATCH 4.19.y' HEAD^..

Possible dependencies:

868c3b95afef ("r8169: fix network lost after resume on DASH systems")
f658b90977d2 ("r8169: fix DMA being used after buffer free if WoL is enabled")
7257c977c811 ("r8169: clean up rtl_pll_power_down/up functions")
128735a1530e ("r8169: improve handling D3 PLL power-down")
9224d97183d9 ("r8169: enable PLL power-down for chip versions 34, 35, 36, 42")
acb58657c869 ("r8169: improve RTL8168g PHY suspend quirk")
e80bd76fbf56 ("r8169: work around power-saving bug on some chip versions")
bb13a800620c ("r8169: fix handling ether_clk")
0439297be951 ("r8169: add support for RTL8125B")
4640338c36af ("r8169: rename RTL8125 to RTL8125A")
288302dab34e ("r8169: improve rtl8169_runtime_resume")
06a14ab852fb ("r8169: remove driver-specific mutex")
abe5fc42f9ce ("r8169: use RTNL to protect critical sections")
567ca57faa62 ("r8169: add rtl8169_up")
ec2f204bddb5 ("r8169: remove no longer needed checks for device being runtime-active")
476c4f5de368 ("r8169: mark device as not present when in PCI D3")
9f0b54cd1672 ("r8169: move switching optional clock on/off to pll power functions")
a2ee847242b3 ("r8169: move updating counters to rtl8169_down")
0c28a63a47bf ("r8169: move napi_disable call and rename rtl8169_hw_reset")
e9882208ae98 ("r8169: improve setting WoL on runtime-resume")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 868c3b95afef4883bfb66c9397482da6840b5baf Mon Sep 17 00:00:00 2001
From: ChunHao Lin <hau@realtek.com>
Date: Fri, 10 Nov 2023 01:34:00 +0800
Subject: [PATCH] r8169: fix network lost after resume on DASH systems

Device that support DASH may be reseted or powered off during suspend.
So driver needs to handle DASH during system suspend and resume. Or
DASH firmware will influence device behavior and causes network lost.

Fixes: b646d90053f8 ("r8169: magic.")
Cc: stable@vger.kernel.org
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: ChunHao Lin <hau@realtek.com>
Link: https://lore.kernel.org/r/20231109173400.4573-3-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index cfcb40d90920..b9bb1d2f0237 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -4661,10 +4661,16 @@ static void rtl8169_down(struct rtl8169_private *tp)
 	rtl8169_cleanup(tp);
 	rtl_disable_exit_l1(tp);
 	rtl_prepare_power_down(tp);
+
+	if (tp->dash_type != RTL_DASH_NONE)
+		rtl8168_driver_stop(tp);
 }
 
 static void rtl8169_up(struct rtl8169_private *tp)
 {
+	if (tp->dash_type != RTL_DASH_NONE)
+		rtl8168_driver_start(tp);
+
 	pci_set_master(tp->pci_dev);
 	phy_init_hw(tp->phydev);
 	phy_resume(tp->phydev);


                 reply	other threads:[~2023-11-24 13:28 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2023112429-echo-designer-9fef@gregkh \
    --to=gregkh@linuxfoundation.org \
    --cc=hau@realtek.com \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox