From: <gregkh@linuxfoundation.org>
To: mario.limonciello@amd.com,alexander.deucher@amd.com,coelacanth_dream@protonmail.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] drm/amd: Fix logic error in" failed to apply to 6.1-stable tree
Date: Fri, 24 Nov 2023 13:53:50 +0000 [thread overview]
Message-ID: <2023112450-blinks-unguided-d206@gregkh> (raw)
The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x ade134ddaee5baa1fa35cc66a12d2489213a26e0
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2023112450-blinks-unguided-d206@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
ade134ddaee5 ("drm/amd: Fix logic error in sienna_cichlid_update_pcie_parameters()")
2d60ba1bf51e ("drm/amd: Align SMU11 SMU_MSG_OverridePcieParameters implementation with SMU13")
6ff5a1cff704 ("drm/amd/pm: conditionally disable pcie lane switching for some sienna_cichlid SKUs")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From ade134ddaee5baa1fa35cc66a12d2489213a26e0 Mon Sep 17 00:00:00 2001
From: Mario Limonciello <mario.limonciello@amd.com>
Date: Tue, 26 Sep 2023 21:07:43 -0500
Subject: [PATCH] drm/amd: Fix logic error in
sienna_cichlid_update_pcie_parameters()
While aligning SMU11 with SMU13 implementation an assumption was made that
`dpm_context->dpm_tables.pcie_table` was populated in dpm table initialization
like in SMU13 but it isn't.
So restore some of the original logic and instead just check for
amdgpu_device_pcie_dynamic_switching_supported() to decide whether to hardcode
values; erring on the side of performance.
Cc: stable@vger.kernel.org # 6.1+
Reported-and-tested-by: Umio Yasuno <coelacanth_dream@protonmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1447#note_2101382
Fixes: e701156ccc6c ("drm/amd: Align SMU11 SMU_MSG_OverridePcieParameters implementation with SMU13")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c
index 164c2264027d..1f05bfb7d473 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c
@@ -2089,36 +2089,41 @@ static int sienna_cichlid_display_disable_memory_clock_switch(struct smu_context
return ret;
}
+#define MAX(a, b) ((a) > (b) ? (a) : (b))
+
static int sienna_cichlid_update_pcie_parameters(struct smu_context *smu,
uint32_t pcie_gen_cap,
uint32_t pcie_width_cap)
{
struct smu_11_0_dpm_context *dpm_context = smu->smu_dpm.dpm_context;
struct smu_11_0_pcie_table *pcie_table = &dpm_context->dpm_tables.pcie_table;
- u32 smu_pcie_arg;
+ uint8_t *table_member1, *table_member2;
+ uint32_t min_gen_speed, max_gen_speed;
+ uint32_t min_lane_width, max_lane_width;
+ uint32_t smu_pcie_arg;
int ret, i;
- /* PCIE gen speed and lane width override */
- if (!amdgpu_device_pcie_dynamic_switching_supported()) {
- if (pcie_table->pcie_gen[NUM_LINK_LEVELS - 1] < pcie_gen_cap)
- pcie_gen_cap = pcie_table->pcie_gen[NUM_LINK_LEVELS - 1];
+ GET_PPTABLE_MEMBER(PcieGenSpeed, &table_member1);
+ GET_PPTABLE_MEMBER(PcieLaneCount, &table_member2);
- if (pcie_table->pcie_lane[NUM_LINK_LEVELS - 1] < pcie_width_cap)
- pcie_width_cap = pcie_table->pcie_lane[NUM_LINK_LEVELS - 1];
+ min_gen_speed = MAX(0, table_member1[0]);
+ max_gen_speed = MIN(pcie_gen_cap, table_member1[1]);
+ min_gen_speed = min_gen_speed > max_gen_speed ?
+ max_gen_speed : min_gen_speed;
+ min_lane_width = MAX(1, table_member2[0]);
+ max_lane_width = MIN(pcie_width_cap, table_member2[1]);
+ min_lane_width = min_lane_width > max_lane_width ?
+ max_lane_width : min_lane_width;
- /* Force all levels to use the same settings */
- for (i = 0; i < NUM_LINK_LEVELS; i++) {
- pcie_table->pcie_gen[i] = pcie_gen_cap;
- pcie_table->pcie_lane[i] = pcie_width_cap;
- }
+ if (!amdgpu_device_pcie_dynamic_switching_supported()) {
+ pcie_table->pcie_gen[0] = max_gen_speed;
+ pcie_table->pcie_lane[0] = max_lane_width;
} else {
- for (i = 0; i < NUM_LINK_LEVELS; i++) {
- if (pcie_table->pcie_gen[i] > pcie_gen_cap)
- pcie_table->pcie_gen[i] = pcie_gen_cap;
- if (pcie_table->pcie_lane[i] > pcie_width_cap)
- pcie_table->pcie_lane[i] = pcie_width_cap;
- }
+ pcie_table->pcie_gen[0] = min_gen_speed;
+ pcie_table->pcie_lane[0] = min_lane_width;
}
+ pcie_table->pcie_gen[1] = max_gen_speed;
+ pcie_table->pcie_lane[1] = max_lane_width;
for (i = 0; i < NUM_LINK_LEVELS; i++) {
smu_pcie_arg = (i << 16 |
reply other threads:[~2023-11-24 13:54 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2023112450-blinks-unguided-d206@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=alexander.deucher@amd.com \
--cc=coelacanth_dream@protonmail.com \
--cc=mario.limonciello@amd.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox