From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
patches@lists.linux.dev, Milen Mitkov <quic_mmitkov@quicinc.com>,
Robert Foss <robert.foss@linaro.org>,
Bryan ODonoghue <bryan.odonoghue@linaro.org>,
Hans Verkuil <hverkuil-cisco@xs4all.nl>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 5.15 30/69] media: camss: sm8250: Virtual channels for CSID
Date: Thu, 30 Nov 2023 16:22:27 +0000 [thread overview]
Message-ID: <20231130162134.066628777@linuxfoundation.org> (raw)
In-Reply-To: <20231130162133.035359406@linuxfoundation.org>
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Milen Mitkov <quic_mmitkov@quicinc.com>
[ Upstream commit 3c4ed72a16bc6733cda9c65048af74a2e8eaa0eb ]
CSID hardware on SM8250 can demux up to 4 simultaneous streams
based on virtual channel (vc) or datatype (dt).
The CSID subdevice entity now has 4 source ports that can be
enabled/disabled and thus can control which virtual channels
are enabled. Datatype demuxing not tested.
In order to keep a valid internal state of the subdevice,
implicit format propagation from the sink to the source pads
has been preserved. However, the format on each source pad
can be different and in that case it must be configured explicitly.
CSID's s_stream is called when any stream is started or stopped.
It will call configure_streams() that will rewrite IRQ settings to HW.
When multiple streams are running simultaneously there is an issue
when writing IRQ settings for one stream while another is still
running, thus avoid re-writing settings if they were not changed
in link setup, or by fully powering off the CSID hardware.
Signed-off-by: Milen Mitkov <quic_mmitkov@quicinc.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Stable-dep-of: e655d1ae9703 ("media: qcom: camss: Fix set CSI2_RX_CFG1_VC_MODE when VC is greater than 3")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../platform/qcom/camss/camss-csid-170.c | 54 ++++++++++++-------
.../media/platform/qcom/camss/camss-csid.c | 44 ++++++++++-----
.../media/platform/qcom/camss/camss-csid.h | 11 +++-
3 files changed, 74 insertions(+), 35 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-csid-170.c b/drivers/media/platform/qcom/camss/camss-csid-170.c
index c234b8d67bc59..7ccf0c11a1a21 100644
--- a/drivers/media/platform/qcom/camss/camss-csid-170.c
+++ b/drivers/media/platform/qcom/camss/camss-csid-170.c
@@ -327,13 +327,14 @@ static const struct csid_format csid_formats[] = {
},
};
-static void csid_configure_stream(struct csid_device *csid, u8 enable)
+static void __csid_configure_stream(struct csid_device *csid, u8 enable, u8 vc)
{
struct csid_testgen_config *tg = &csid->testgen;
u32 val;
u32 phy_sel = 0;
u8 lane_cnt = csid->phy.lane_cnt;
- struct v4l2_mbus_framefmt *input_format = &csid->fmt[MSM_CSID_PAD_SRC];
+ /* Source pads matching RDI channels on hardware. Pad 1 -> RDI0, Pad 2 -> RDI1, etc. */
+ struct v4l2_mbus_framefmt *input_format = &csid->fmt[MSM_CSID_PAD_FIRST_SRC + vc];
const struct csid_format *format = csid_get_fmt_entry(csid->formats, csid->nformats,
input_format->code);
@@ -344,8 +345,7 @@ static void csid_configure_stream(struct csid_device *csid, u8 enable)
phy_sel = csid->phy.csiphy_id;
if (enable) {
- u8 vc = 0; /* Virtual Channel 0 */
- u8 dt_id = vc * 4;
+ u8 dt_id = vc;
if (tg->enabled) {
/* Config Test Generator */
@@ -388,42 +388,42 @@ static void csid_configure_stream(struct csid_device *csid, u8 enable)
val |= format->data_type << RDI_CFG0_DATA_TYPE;
val |= vc << RDI_CFG0_VIRTUAL_CHANNEL;
val |= dt_id << RDI_CFG0_DT_ID;
- writel_relaxed(val, csid->base + CSID_RDI_CFG0(0));
+ writel_relaxed(val, csid->base + CSID_RDI_CFG0(vc));
/* CSID_TIMESTAMP_STB_POST_IRQ */
val = 2 << RDI_CFG1_TIMESTAMP_STB_SEL;
- writel_relaxed(val, csid->base + CSID_RDI_CFG1(0));
+ writel_relaxed(val, csid->base + CSID_RDI_CFG1(vc));
val = 1;
- writel_relaxed(val, csid->base + CSID_RDI_FRM_DROP_PERIOD(0));
+ writel_relaxed(val, csid->base + CSID_RDI_FRM_DROP_PERIOD(vc));
val = 0;
- writel_relaxed(val, csid->base + CSID_RDI_FRM_DROP_PATTERN(0));
+ writel_relaxed(val, csid->base + CSID_RDI_FRM_DROP_PATTERN(vc));
val = 1;
- writel_relaxed(val, csid->base + CSID_RDI_IRQ_SUBSAMPLE_PERIOD(0));
+ writel_relaxed(val, csid->base + CSID_RDI_IRQ_SUBSAMPLE_PERIOD(vc));
val = 0;
- writel_relaxed(val, csid->base + CSID_RDI_IRQ_SUBSAMPLE_PATTERN(0));
+ writel_relaxed(val, csid->base + CSID_RDI_IRQ_SUBSAMPLE_PATTERN(vc));
val = 1;
- writel_relaxed(val, csid->base + CSID_RDI_RPP_PIX_DROP_PERIOD(0));
+ writel_relaxed(val, csid->base + CSID_RDI_RPP_PIX_DROP_PERIOD(vc));
val = 0;
- writel_relaxed(val, csid->base + CSID_RDI_RPP_PIX_DROP_PATTERN(0));
+ writel_relaxed(val, csid->base + CSID_RDI_RPP_PIX_DROP_PATTERN(vc));
val = 1;
- writel_relaxed(val, csid->base + CSID_RDI_RPP_LINE_DROP_PERIOD(0));
+ writel_relaxed(val, csid->base + CSID_RDI_RPP_LINE_DROP_PERIOD(vc));
val = 0;
- writel_relaxed(val, csid->base + CSID_RDI_RPP_LINE_DROP_PATTERN(0));
+ writel_relaxed(val, csid->base + CSID_RDI_RPP_LINE_DROP_PATTERN(vc));
val = 0;
- writel_relaxed(val, csid->base + CSID_RDI_CTRL(0));
+ writel_relaxed(val, csid->base + CSID_RDI_CTRL(vc));
- val = readl_relaxed(csid->base + CSID_RDI_CFG0(0));
+ val = readl_relaxed(csid->base + CSID_RDI_CFG0(vc));
val |= 1 << RDI_CFG0_ENABLE;
- writel_relaxed(val, csid->base + CSID_RDI_CFG0(0));
+ writel_relaxed(val, csid->base + CSID_RDI_CFG0(vc));
}
if (tg->enabled) {
@@ -449,7 +449,16 @@ static void csid_configure_stream(struct csid_device *csid, u8 enable)
val = HALT_CMD_RESUME_AT_FRAME_BOUNDARY << RDI_CTRL_HALT_CMD;
else
val = HALT_CMD_HALT_AT_FRAME_BOUNDARY << RDI_CTRL_HALT_CMD;
- writel_relaxed(val, csid->base + CSID_RDI_CTRL(0));
+ writel_relaxed(val, csid->base + CSID_RDI_CTRL(vc));
+}
+
+static void csid_configure_stream(struct csid_device *csid, u8 enable)
+{
+ u8 i;
+ /* Loop through all enabled VCs and configure stream for each */
+ for (i = 0; i < MSM_CSID_MAX_SRC_STREAMS; i++)
+ if (csid->phy.en_vc & BIT(i))
+ __csid_configure_stream(csid, enable, i);
}
static int csid_configure_testgen_pattern(struct csid_device *csid, s32 val)
@@ -495,6 +504,7 @@ static irqreturn_t csid_isr(int irq, void *dev)
struct csid_device *csid = dev;
u32 val;
u8 reset_done;
+ int i;
val = readl_relaxed(csid->base + CSID_TOP_IRQ_STATUS);
writel_relaxed(val, csid->base + CSID_TOP_IRQ_CLEAR);
@@ -503,8 +513,12 @@ static irqreturn_t csid_isr(int irq, void *dev)
val = readl_relaxed(csid->base + CSID_CSI2_RX_IRQ_STATUS);
writel_relaxed(val, csid->base + CSID_CSI2_RX_IRQ_CLEAR);
- val = readl_relaxed(csid->base + CSID_CSI2_RDIN_IRQ_STATUS(0));
- writel_relaxed(val, csid->base + CSID_CSI2_RDIN_IRQ_CLEAR(0));
+ /* Read and clear IRQ status for each enabled RDI channel */
+ for (i = 0; i < MSM_CSID_MAX_SRC_STREAMS; i++)
+ if (csid->phy.en_vc & BIT(i)) {
+ val = readl_relaxed(csid->base + CSID_CSI2_RDIN_IRQ_STATUS(i));
+ writel_relaxed(val, csid->base + CSID_CSI2_RDIN_IRQ_CLEAR(i));
+ }
val = 1 << IRQ_CMD_CLEAR;
writel_relaxed(val, csid->base + CSID_IRQ_CMD);
diff --git a/drivers/media/platform/qcom/camss/camss-csid.c b/drivers/media/platform/qcom/camss/camss-csid.c
index a1637b78568b2..2a294587ec9d9 100644
--- a/drivers/media/platform/qcom/camss/camss-csid.c
+++ b/drivers/media/platform/qcom/camss/camss-csid.c
@@ -180,6 +180,8 @@ static int csid_set_power(struct v4l2_subdev *sd, int on)
return ret;
}
+ csid->phy.need_vc_update = true;
+
enable_irq(csid->irq);
ret = csid->ops->reset(csid);
@@ -229,7 +231,10 @@ static int csid_set_stream(struct v4l2_subdev *sd, int enable)
return -ENOLINK;
}
- csid->ops->configure_stream(csid, enable);
+ if (csid->phy.need_vc_update) {
+ csid->ops->configure_stream(csid, enable);
+ csid->phy.need_vc_update = false;
+ }
return 0;
}
@@ -440,6 +445,7 @@ static int csid_set_format(struct v4l2_subdev *sd,
{
struct csid_device *csid = v4l2_get_subdevdata(sd);
struct v4l2_mbus_framefmt *format;
+ int i;
format = __csid_get_format(csid, sd_state, fmt->pad, fmt->which);
if (format == NULL)
@@ -448,14 +454,14 @@ static int csid_set_format(struct v4l2_subdev *sd,
csid_try_format(csid, sd_state, fmt->pad, &fmt->format, fmt->which);
*format = fmt->format;
- /* Propagate the format from sink to source */
+ /* Propagate the format from sink to source pads */
if (fmt->pad == MSM_CSID_PAD_SINK) {
- format = __csid_get_format(csid, sd_state, MSM_CSID_PAD_SRC,
- fmt->which);
+ for (i = MSM_CSID_PAD_FIRST_SRC; i < MSM_CSID_PADS_NUM; ++i) {
+ format = __csid_get_format(csid, sd_state, i, fmt->which);
- *format = fmt->format;
- csid_try_format(csid, sd_state, MSM_CSID_PAD_SRC, format,
- fmt->which);
+ *format = fmt->format;
+ csid_try_format(csid, sd_state, i, format, fmt->which);
+ }
}
return 0;
@@ -695,7 +701,6 @@ static int csid_link_setup(struct media_entity *entity,
struct csid_device *csid;
struct csiphy_device *csiphy;
struct csiphy_lanes_cfg *lane_cfg;
- struct v4l2_subdev_format format = { 0 };
sd = media_entity_to_v4l2_subdev(entity);
csid = v4l2_get_subdevdata(sd);
@@ -718,11 +723,22 @@ static int csid_link_setup(struct media_entity *entity,
lane_cfg = &csiphy->cfg.csi2->lane_cfg;
csid->phy.lane_cnt = lane_cfg->num_data;
csid->phy.lane_assign = csid_get_lane_assign(lane_cfg);
+ }
+ /* Decide which virtual channels to enable based on which source pads are enabled */
+ if (local->flags & MEDIA_PAD_FL_SOURCE) {
+ struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
+ struct csid_device *csid = v4l2_get_subdevdata(sd);
+ struct device *dev = csid->camss->dev;
+
+ if (flags & MEDIA_LNK_FL_ENABLED)
+ csid->phy.en_vc |= BIT(local->index - 1);
+ else
+ csid->phy.en_vc &= ~BIT(local->index - 1);
- /* Reset format on source pad to sink pad format */
- format.pad = MSM_CSID_PAD_SRC;
- format.which = V4L2_SUBDEV_FORMAT_ACTIVE;
- csid_set_format(&csid->subdev, NULL, &format);
+ csid->phy.need_vc_update = true;
+
+ dev_dbg(dev, "%s: Enabled CSID virtual channels mask 0x%x\n",
+ __func__, csid->phy.en_vc);
}
return 0;
@@ -773,6 +789,7 @@ int msm_csid_register_entity(struct csid_device *csid,
struct v4l2_subdev *sd = &csid->subdev;
struct media_pad *pads = csid->pads;
struct device *dev = csid->camss->dev;
+ int i;
int ret;
v4l2_subdev_init(sd, &csid_v4l2_ops);
@@ -809,7 +826,8 @@ int msm_csid_register_entity(struct csid_device *csid,
}
pads[MSM_CSID_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
- pads[MSM_CSID_PAD_SRC].flags = MEDIA_PAD_FL_SOURCE;
+ for (i = MSM_CSID_PAD_FIRST_SRC; i < MSM_CSID_PADS_NUM; ++i)
+ pads[i].flags = MEDIA_PAD_FL_SOURCE;
sd->entity.function = MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER;
sd->entity.ops = &csid_media_ops;
diff --git a/drivers/media/platform/qcom/camss/camss-csid.h b/drivers/media/platform/qcom/camss/camss-csid.h
index 814ebc7c29d65..6b5485fe18332 100644
--- a/drivers/media/platform/qcom/camss/camss-csid.h
+++ b/drivers/media/platform/qcom/camss/camss-csid.h
@@ -19,8 +19,13 @@
#include <media/v4l2-subdev.h>
#define MSM_CSID_PAD_SINK 0
-#define MSM_CSID_PAD_SRC 1
-#define MSM_CSID_PADS_NUM 2
+#define MSM_CSID_PAD_FIRST_SRC 1
+#define MSM_CSID_PADS_NUM 5
+
+#define MSM_CSID_PAD_SRC (MSM_CSID_PAD_FIRST_SRC)
+
+/* CSID hardware can demultiplex up to 4 outputs */
+#define MSM_CSID_MAX_SRC_STREAMS 4
#define DATA_TYPE_EMBEDDED_DATA_8BIT 0x12
#define DATA_TYPE_YUV420_8BIT 0x18
@@ -81,6 +86,8 @@ struct csid_phy_config {
u8 csiphy_id;
u8 lane_cnt;
u32 lane_assign;
+ u32 en_vc;
+ u8 need_vc_update;
};
struct csid_device;
--
2.42.0
next prev parent reply other threads:[~2023-11-30 16:33 UTC|newest]
Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-30 16:21 [PATCH 5.15 00/69] 5.15.141-rc1 review Greg Kroah-Hartman
2023-11-30 16:21 ` [PATCH 5.15 01/69] afs: Fix afs_server_list to be cleaned up with RCU Greg Kroah-Hartman
2023-11-30 16:21 ` [PATCH 5.15 02/69] afs: Make error on cell lookup failure consistent with OpenAFS Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 03/69] drm/panel: boe-tv101wum-nl6: Fine tune the panel power sequence Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 04/69] drm/panel: auo,b101uan08.3: " Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 05/69] drm/panel: simple: Fix Innolux G101ICE-L01 bus flags Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 06/69] drm/panel: simple: Fix Innolux G101ICE-L01 timings Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 07/69] wireguard: use DEV_STATS_INC() Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 08/69] octeontx2-pf: Fix memory leak during interface down Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 09/69] ata: pata_isapnp: Add missing error check for devm_ioport_map() Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 10/69] drm/rockchip: vop: Fix color for RGB888/BGR888 format on VOP full Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 11/69] HID: core: store the unique system identifier in hid_device Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 12/69] HID: fix HID device resource race between HID core and debugging support Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 13/69] ipv4: Correct/silence an endian warning in __ip_do_redirect Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 14/69] net: usb: ax88179_178a: fix failed operations during ax88179_reset Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 15/69] net/smc: avoid data corruption caused by decline Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 16/69] arm/xen: fix xen_vcpu_info allocation alignment Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 17/69] octeontx2-pf: Fix ntuple rule creation to direct packet to VF with higher Rx queue than its PF Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 18/69] amd-xgbe: handle corner-case during sfp hotplug Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 19/69] amd-xgbe: handle the corner-case during tx completion Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 20/69] amd-xgbe: propagate the correct speed and duplex status Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 21/69] net: axienet: Fix check for partial TX checksum Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 22/69] afs: Return ENOENT if no cell DNS record can be found Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 23/69] afs: Fix file locking on R/O volumes to operate in local mode Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 24/69] nvmet: nul-terminate the NQNs passed in the connect command Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 25/69] USB: dwc3: qcom: fix resource leaks on probe deferral Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 26/69] USB: dwc3: qcom: fix ACPI platform device leak Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 27/69] lockdep: Fix block chain corruption Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 28/69] MIPS: KVM: Fix a build warning about variable set but not used Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 29/69] media: camss: Replace hard coded value with parameter Greg Kroah-Hartman
2023-11-30 16:22 ` Greg Kroah-Hartman [this message]
2023-11-30 16:22 ` [PATCH 5.15 31/69] media: qcom: camss: Fix set CSI2_RX_CFG1_VC_MODE when VC is greater than 3 Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 32/69] media: qcom: camss: Fix csid-gen2 for test pattern generator Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 33/69] ext4: add a new helper to check if es must be kept Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 34/69] ext4: factor out __es_alloc_extent() and __es_free_extent() Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 35/69] ext4: use pre-allocated es in __es_insert_extent() Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 36/69] ext4: use pre-allocated es in __es_remove_extent() Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 37/69] ext4: using nofail preallocation in ext4_es_remove_extent() Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 38/69] ext4: using nofail preallocation in ext4_es_insert_delayed_block() Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 39/69] ext4: using nofail preallocation in ext4_es_insert_extent() Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 40/69] ext4: fix slab-use-after-free " Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 41/69] ext4: make sure allocate pending entry not fail Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 42/69] tracing/kprobes: Return EADDRNOTAVAIL when func matches several symbols Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 43/69] proc: sysctl: prevent aliased sysctls from getting passed to init Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 44/69] ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CVA Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 45/69] swiotlb-xen: provide the "max_mapping_size" method Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 46/69] bcache: replace a mistaken IS_ERR() by IS_ERR_OR_NULL() in btree_gc_coalesce() Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 47/69] md: fix bi_status reporting in md_end_clone_io Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 48/69] bcache: fixup multi-threaded bch_sectors_dirty_init() wake-up race Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 49/69] io_uring/fs: consider link->flags when getting path for LINKAT Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 50/69] s390/dasd: protect device queue against concurrent access Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 51/69] USB: serial: option: add Luat Air72*U series products Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 52/69] hv_netvsc: Fix race of register_netdevice_notifier and VF register Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 53/69] hv_netvsc: Mark VF as slave before exposing it to user-mode Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 54/69] dm-delay: fix a race between delay_presuspend and delay_bio Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 55/69] bcache: check return value from btree_node_alloc_replacement() Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 56/69] bcache: prevent potential division by zero error Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 57/69] bcache: fixup init dirty data errors Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 58/69] bcache: fixup lock c->root error Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 59/69] usb: cdnsp: Fix deadlock issue during using NCM gadget Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 60/69] USB: serial: option: add Fibocom L7xx modules Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 61/69] USB: serial: option: fix FM101R-GL defines Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 62/69] USB: serial: option: dont claim interface 4 for ZTE MF290 Greg Kroah-Hartman
2023-11-30 16:23 ` [PATCH 5.15 63/69] usb: typec: tcpm: Skip hard reset when in error recovery Greg Kroah-Hartman
2023-11-30 16:23 ` [PATCH 5.15 64/69] USB: dwc2: write HCINT with INTMASK applied Greg Kroah-Hartman
2023-11-30 16:23 ` [PATCH 5.15 65/69] usb: dwc3: Fix default mode initialization Greg Kroah-Hartman
2023-11-30 16:23 ` [PATCH 5.15 66/69] usb: dwc3: set the dma max_seg_size Greg Kroah-Hartman
2023-11-30 16:23 ` [PATCH 5.15 67/69] USB: dwc3: qcom: fix software node leak on probe errors Greg Kroah-Hartman
2023-11-30 16:23 ` [PATCH 5.15 68/69] USB: dwc3: qcom: fix wakeup after probe deferral Greg Kroah-Hartman
2023-11-30 16:23 ` [PATCH 5.15 69/69] io_uring: fix off-by one bvec index Greg Kroah-Hartman
2023-11-30 17:21 ` [PATCH 5.15 00/69] 5.15.141-rc1 review Daniel Díaz
2023-11-30 17:44 ` Guenter Roeck
2023-11-30 18:11 ` Daniel Díaz
2023-11-30 18:56 ` Guenter Roeck
2023-12-01 8:21 ` Greg Kroah-Hartman
2023-12-01 9:35 ` Francis Laniel
2023-12-01 9:44 ` Greg Kroah-Hartman
2023-12-01 14:34 ` Daniel Díaz
2023-12-01 23:04 ` Greg Kroah-Hartman
2023-12-04 14:55 ` Daniel Díaz
2023-12-01 6:31 ` Harshit Mogalapalli
2023-11-30 22:27 ` Pavel Machek
2023-11-30 18:57 ` Florian Fainelli
2023-12-01 0:08 ` Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231130162134.066628777@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=bryan.odonoghue@linaro.org \
--cc=hverkuil-cisco@xs4all.nl \
--cc=patches@lists.linux.dev \
--cc=quic_mmitkov@quicinc.com \
--cc=robert.foss@linaro.org \
--cc=sashal@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox