From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
patches@lists.linux.dev, Victor Fragoso <victorffs@hotmail.com>,
Lars Melin <larsm17@gmail.com>, Johan Hovold <johan@kernel.org>
Subject: [PATCH 5.15 60/69] USB: serial: option: add Fibocom L7xx modules
Date: Thu, 30 Nov 2023 16:22:57 +0000 [thread overview]
Message-ID: <20231130162135.034900749@linuxfoundation.org> (raw)
In-Reply-To: <20231130162133.035359406@linuxfoundation.org>
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Victor Fragoso <victorffs@hotmail.com>
commit e389fe8b68137344562fb6e4d53d8a89ef6212dd upstream.
Add support for Fibocom L716-EU module series.
L716-EU is a Fibocom module based on ZTE's V3E/V3T chipset.
Device creates multiple interfaces when connected to PC as follows:
- Network Interface: ECM or RNDIS (set by FW or AT Command)
- ttyUSB0: AT port
- ttyUSB1: Modem port
- ttyUSB2: AT2 port
- ttyUSB3: Trace port for log information
- ADB: ADB port for debugging. ("Driver=usbfs" when ADB server enabled)
Here are the outputs of lsusb and usb-devices:
$ ls /dev/ttyUSB*
/dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2 /dev/ttyUSB3
usb-devices:
L716-EU (ECM mode):
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 51 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2cb7 ProdID=0001 Rev= 1.00
S: Manufacturer=Fibocom,Incorporated
S: Product=Fibocom Mobile Boardband
S: SerialNumber=1234567890ABCDEF
C:* #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=87(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
L716-EU (RNDIS mode):
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 49 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2cb7 ProdID=0001 Rev= 1.00
S: Manufacturer=Fibocom,Incorporated
S: Product=Fibocom Mobile Boardband
S: SerialNumber=1234567890ABCDEF
C:* #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=ff Driver=rndis_host
E: Ad=87(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Victor Fragoso <victorffs@hotmail.com>
Reviewed-by: Lars Melin <larsm17@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2251,6 +2251,7 @@ static const struct usb_device_id option
.driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
{ USB_DEVICE(0x1782, 0x4d10) }, /* Fibocom L610 (AT mode) */
{ USB_DEVICE_INTERFACE_CLASS(0x1782, 0x4d11, 0xff) }, /* Fibocom L610 (ECM/RNDIS mode) */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x0001, 0xff, 0xff, 0xff) }, /* Fibocom L716-EU (ECM/RNDIS mode) */
{ USB_DEVICE(0x2cb7, 0x0104), /* Fibocom NL678 series */
.driver_info = RSVD(4) | RSVD(5) },
{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff), /* Fibocom NL678 series */
next prev parent reply other threads:[~2023-11-30 16:33 UTC|newest]
Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-30 16:21 [PATCH 5.15 00/69] 5.15.141-rc1 review Greg Kroah-Hartman
2023-11-30 16:21 ` [PATCH 5.15 01/69] afs: Fix afs_server_list to be cleaned up with RCU Greg Kroah-Hartman
2023-11-30 16:21 ` [PATCH 5.15 02/69] afs: Make error on cell lookup failure consistent with OpenAFS Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 03/69] drm/panel: boe-tv101wum-nl6: Fine tune the panel power sequence Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 04/69] drm/panel: auo,b101uan08.3: " Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 05/69] drm/panel: simple: Fix Innolux G101ICE-L01 bus flags Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 06/69] drm/panel: simple: Fix Innolux G101ICE-L01 timings Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 07/69] wireguard: use DEV_STATS_INC() Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 08/69] octeontx2-pf: Fix memory leak during interface down Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 09/69] ata: pata_isapnp: Add missing error check for devm_ioport_map() Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 10/69] drm/rockchip: vop: Fix color for RGB888/BGR888 format on VOP full Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 11/69] HID: core: store the unique system identifier in hid_device Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 12/69] HID: fix HID device resource race between HID core and debugging support Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 13/69] ipv4: Correct/silence an endian warning in __ip_do_redirect Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 14/69] net: usb: ax88179_178a: fix failed operations during ax88179_reset Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 15/69] net/smc: avoid data corruption caused by decline Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 16/69] arm/xen: fix xen_vcpu_info allocation alignment Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 17/69] octeontx2-pf: Fix ntuple rule creation to direct packet to VF with higher Rx queue than its PF Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 18/69] amd-xgbe: handle corner-case during sfp hotplug Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 19/69] amd-xgbe: handle the corner-case during tx completion Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 20/69] amd-xgbe: propagate the correct speed and duplex status Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 21/69] net: axienet: Fix check for partial TX checksum Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 22/69] afs: Return ENOENT if no cell DNS record can be found Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 23/69] afs: Fix file locking on R/O volumes to operate in local mode Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 24/69] nvmet: nul-terminate the NQNs passed in the connect command Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 25/69] USB: dwc3: qcom: fix resource leaks on probe deferral Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 26/69] USB: dwc3: qcom: fix ACPI platform device leak Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 27/69] lockdep: Fix block chain corruption Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 28/69] MIPS: KVM: Fix a build warning about variable set but not used Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 29/69] media: camss: Replace hard coded value with parameter Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 30/69] media: camss: sm8250: Virtual channels for CSID Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 31/69] media: qcom: camss: Fix set CSI2_RX_CFG1_VC_MODE when VC is greater than 3 Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 32/69] media: qcom: camss: Fix csid-gen2 for test pattern generator Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 33/69] ext4: add a new helper to check if es must be kept Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 34/69] ext4: factor out __es_alloc_extent() and __es_free_extent() Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 35/69] ext4: use pre-allocated es in __es_insert_extent() Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 36/69] ext4: use pre-allocated es in __es_remove_extent() Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 37/69] ext4: using nofail preallocation in ext4_es_remove_extent() Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 38/69] ext4: using nofail preallocation in ext4_es_insert_delayed_block() Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 39/69] ext4: using nofail preallocation in ext4_es_insert_extent() Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 40/69] ext4: fix slab-use-after-free " Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 41/69] ext4: make sure allocate pending entry not fail Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 42/69] tracing/kprobes: Return EADDRNOTAVAIL when func matches several symbols Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 43/69] proc: sysctl: prevent aliased sysctls from getting passed to init Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 44/69] ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CVA Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 45/69] swiotlb-xen: provide the "max_mapping_size" method Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 46/69] bcache: replace a mistaken IS_ERR() by IS_ERR_OR_NULL() in btree_gc_coalesce() Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 47/69] md: fix bi_status reporting in md_end_clone_io Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 48/69] bcache: fixup multi-threaded bch_sectors_dirty_init() wake-up race Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 49/69] io_uring/fs: consider link->flags when getting path for LINKAT Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 50/69] s390/dasd: protect device queue against concurrent access Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 51/69] USB: serial: option: add Luat Air72*U series products Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 52/69] hv_netvsc: Fix race of register_netdevice_notifier and VF register Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 53/69] hv_netvsc: Mark VF as slave before exposing it to user-mode Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 54/69] dm-delay: fix a race between delay_presuspend and delay_bio Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 55/69] bcache: check return value from btree_node_alloc_replacement() Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 56/69] bcache: prevent potential division by zero error Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 57/69] bcache: fixup init dirty data errors Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 58/69] bcache: fixup lock c->root error Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 59/69] usb: cdnsp: Fix deadlock issue during using NCM gadget Greg Kroah-Hartman
2023-11-30 16:22 ` Greg Kroah-Hartman [this message]
2023-11-30 16:22 ` [PATCH 5.15 61/69] USB: serial: option: fix FM101R-GL defines Greg Kroah-Hartman
2023-11-30 16:22 ` [PATCH 5.15 62/69] USB: serial: option: dont claim interface 4 for ZTE MF290 Greg Kroah-Hartman
2023-11-30 16:23 ` [PATCH 5.15 63/69] usb: typec: tcpm: Skip hard reset when in error recovery Greg Kroah-Hartman
2023-11-30 16:23 ` [PATCH 5.15 64/69] USB: dwc2: write HCINT with INTMASK applied Greg Kroah-Hartman
2023-11-30 16:23 ` [PATCH 5.15 65/69] usb: dwc3: Fix default mode initialization Greg Kroah-Hartman
2023-11-30 16:23 ` [PATCH 5.15 66/69] usb: dwc3: set the dma max_seg_size Greg Kroah-Hartman
2023-11-30 16:23 ` [PATCH 5.15 67/69] USB: dwc3: qcom: fix software node leak on probe errors Greg Kroah-Hartman
2023-11-30 16:23 ` [PATCH 5.15 68/69] USB: dwc3: qcom: fix wakeup after probe deferral Greg Kroah-Hartman
2023-11-30 16:23 ` [PATCH 5.15 69/69] io_uring: fix off-by one bvec index Greg Kroah-Hartman
2023-11-30 17:21 ` [PATCH 5.15 00/69] 5.15.141-rc1 review Daniel Díaz
2023-11-30 17:44 ` Guenter Roeck
2023-11-30 18:11 ` Daniel Díaz
2023-11-30 18:56 ` Guenter Roeck
2023-12-01 8:21 ` Greg Kroah-Hartman
2023-12-01 9:35 ` Francis Laniel
2023-12-01 9:44 ` Greg Kroah-Hartman
2023-12-01 14:34 ` Daniel Díaz
2023-12-01 23:04 ` Greg Kroah-Hartman
2023-12-04 14:55 ` Daniel Díaz
2023-12-01 6:31 ` Harshit Mogalapalli
2023-11-30 22:27 ` Pavel Machek
2023-11-30 18:57 ` Florian Fainelli
2023-12-01 0:08 ` Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231130162135.034900749@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=larsm17@gmail.com \
--cc=patches@lists.linux.dev \
--cc=stable@vger.kernel.org \
--cc=victorffs@hotmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox