* FAILED: patch "[PATCH] drm/amd/display: fix a pipe mapping error in dcn32_fpu" failed to apply to 6.6-stable tree
@ 2023-12-03 13:20 gregkh
0 siblings, 0 replies; 2+ messages in thread
From: gregkh @ 2023-12-03 13:20 UTC (permalink / raw)
To: wenjing.liu, alexander.deucher, chaitanya.dhere, hamza.mahfooz; +Cc: stable
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x dc9b0c2af004fe7d9d7b67015fadcb0a7123c740
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2023120334-shredder-scheming-284d@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
dc9b0c2af004 ("drm/amd/display: fix a pipe mapping error in dcn32_fpu")
df475cced6af ("drm/amd/display: add primary pipe check when building slice table for dcn3x")
c51d87202d1f ("drm/amd/display: do not attempt ODM power optimization if minimal transition doesn't exist")
39d39a019657 ("drm/amd/display: switch to new ODM policy for windowed MPO ODM support")
0b9dc439f404 ("drm/amd/display: Write flip addr to scratch reg for subvp")
96182df99dad ("drm/amd/display: Enable runtime register offset init for DCN32 DMUB")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From dc9b0c2af004fe7d9d7b67015fadcb0a7123c740 Mon Sep 17 00:00:00 2001
From: Wenjing Liu <wenjing.liu@amd.com>
Date: Mon, 6 Nov 2023 16:47:19 -0500
Subject: [PATCH] drm/amd/display: fix a pipe mapping error in dcn32_fpu
[why]
In dcn32 DML pipes are ordered the same as dc pipes but only for used
pipes. For example, if dc pipe 1 and 2 are used, their dml pipe indices
would be 0 and 1 respectively. However
update_pipe_slice_table_with_split_flags doesn't skip indices for free
pipes. This causes us to not reference correct dml pipe output when
building pipe topology.
[how]
Use two variables to iterate dc and dml pipes respectively and only
increment dml pipe index when current dc pipe is not free.
Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
index 9ec4172d1c2d..44b0666e53b0 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
@@ -1192,13 +1192,16 @@ static bool update_pipe_slice_table_with_split_flags(
*/
struct pipe_ctx *pipe;
bool odm;
- int i;
+ int dc_pipe_idx, dml_pipe_idx = 0;
bool updated = false;
- for (i = 0; i < dc->res_pool->pipe_count; i++) {
- pipe = &context->res_ctx.pipe_ctx[i];
+ for (dc_pipe_idx = 0;
+ dc_pipe_idx < dc->res_pool->pipe_count; dc_pipe_idx++) {
+ pipe = &context->res_ctx.pipe_ctx[dc_pipe_idx];
+ if (resource_is_pipe_type(pipe, FREE_PIPE))
+ continue;
- if (merge[i]) {
+ if (merge[dc_pipe_idx]) {
if (resource_is_pipe_type(pipe, OPP_HEAD))
/* merging OPP head means reducing ODM slice
* count by 1
@@ -1213,17 +1216,18 @@ static bool update_pipe_slice_table_with_split_flags(
updated = true;
}
- if (split[i]) {
- odm = vba->ODMCombineEnabled[vba->pipe_plane[i]] !=
+ if (split[dc_pipe_idx]) {
+ odm = vba->ODMCombineEnabled[vba->pipe_plane[dml_pipe_idx]] !=
dm_odm_combine_mode_disabled;
if (odm && resource_is_pipe_type(pipe, OPP_HEAD))
update_slice_table_for_stream(
- table, pipe->stream, split[i] - 1);
+ table, pipe->stream, split[dc_pipe_idx] - 1);
else if (!odm && resource_is_pipe_type(pipe, DPP_PIPE))
update_slice_table_for_plane(table, pipe,
- pipe->plane_state, split[i] - 1);
+ pipe->plane_state, split[dc_pipe_idx] - 1);
updated = true;
}
+ dml_pipe_idx++;
}
return updated;
}
^ permalink raw reply related [flat|nested] 2+ messages in thread* FAILED: patch "[PATCH] drm/amd/display: fix a pipe mapping error in dcn32_fpu" failed to apply to 6.6-stable tree
@ 2024-01-27 23:11 gregkh
0 siblings, 0 replies; 2+ messages in thread
From: gregkh @ 2024-01-27 23:11 UTC (permalink / raw)
To: wenjing.liu, alexander.deucher, chaitanya.dhere, hamza.mahfooz; +Cc: stable
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 613a81995575889753ca44d70d33e84a1d21bae5
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2024012733-genre-immunity-c4f2@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
613a81995575 ("drm/amd/display: fix a pipe mapping error in dcn32_fpu")
df475cced6af ("drm/amd/display: add primary pipe check when building slice table for dcn3x")
c51d87202d1f ("drm/amd/display: do not attempt ODM power optimization if minimal transition doesn't exist")
39d39a019657 ("drm/amd/display: switch to new ODM policy for windowed MPO ODM support")
0b9dc439f404 ("drm/amd/display: Write flip addr to scratch reg for subvp")
96182df99dad ("drm/amd/display: Enable runtime register offset init for DCN32 DMUB")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 613a81995575889753ca44d70d33e84a1d21bae5 Mon Sep 17 00:00:00 2001
From: Wenjing Liu <wenjing.liu@amd.com>
Date: Mon, 6 Nov 2023 16:47:19 -0500
Subject: [PATCH] drm/amd/display: fix a pipe mapping error in dcn32_fpu
[why]
In dcn32 DML pipes are ordered the same as dc pipes but only for used
pipes. For example, if dc pipe 1 and 2 are used, their dml pipe indices
would be 0 and 1 respectively. However
update_pipe_slice_table_with_split_flags doesn't skip indices for free
pipes. This causes us to not reference correct dml pipe output when
building pipe topology.
[how]
Use two variables to iterate dc and dml pipes respectively and only
increment dml pipe index when current dc pipe is not free.
Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
index 9ec4172d1c2d..44b0666e53b0 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
@@ -1192,13 +1192,16 @@ static bool update_pipe_slice_table_with_split_flags(
*/
struct pipe_ctx *pipe;
bool odm;
- int i;
+ int dc_pipe_idx, dml_pipe_idx = 0;
bool updated = false;
- for (i = 0; i < dc->res_pool->pipe_count; i++) {
- pipe = &context->res_ctx.pipe_ctx[i];
+ for (dc_pipe_idx = 0;
+ dc_pipe_idx < dc->res_pool->pipe_count; dc_pipe_idx++) {
+ pipe = &context->res_ctx.pipe_ctx[dc_pipe_idx];
+ if (resource_is_pipe_type(pipe, FREE_PIPE))
+ continue;
- if (merge[i]) {
+ if (merge[dc_pipe_idx]) {
if (resource_is_pipe_type(pipe, OPP_HEAD))
/* merging OPP head means reducing ODM slice
* count by 1
@@ -1213,17 +1216,18 @@ static bool update_pipe_slice_table_with_split_flags(
updated = true;
}
- if (split[i]) {
- odm = vba->ODMCombineEnabled[vba->pipe_plane[i]] !=
+ if (split[dc_pipe_idx]) {
+ odm = vba->ODMCombineEnabled[vba->pipe_plane[dml_pipe_idx]] !=
dm_odm_combine_mode_disabled;
if (odm && resource_is_pipe_type(pipe, OPP_HEAD))
update_slice_table_for_stream(
- table, pipe->stream, split[i] - 1);
+ table, pipe->stream, split[dc_pipe_idx] - 1);
else if (!odm && resource_is_pipe_type(pipe, DPP_PIPE))
update_slice_table_for_plane(table, pipe,
- pipe->plane_state, split[i] - 1);
+ pipe->plane_state, split[dc_pipe_idx] - 1);
updated = true;
}
+ dml_pipe_idx++;
}
return updated;
}
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2024-01-27 23:11 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-12-03 13:20 FAILED: patch "[PATCH] drm/amd/display: fix a pipe mapping error in dcn32_fpu" failed to apply to 6.6-stable tree gregkh
-- strict thread matches above, loose matches on Subject: below --
2024-01-27 23:11 gregkh
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox