[PATCH 4.14 09/30] amd-xgbe: propagate the correct speed and duplex status

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Raju Rangoju <Raju.Rangoju@amd.com>

[ Upstream commit 7a2323ac24a50311f64a3a9b54ed5bef5821ecae ]

xgbe_get_link_ksettings() does not propagate correct speed and duplex
information to ethtool during cable unplug. Due to which ethtool reports
incorrect values for speed and duplex.

Address this by propagating correct information.

Fixes: 7c12aa08779c ("amd-xgbe: Move the PHY support into amd-xgbe")
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
index ff397bb25042c..0e67621031e0d 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
@@ -314,10 +314,15 @@ static int xgbe_get_link_ksettings(struct net_device *netdev,
 
 	cmd->base.phy_address = pdata->phy.address;
 
-	cmd->base.autoneg = pdata->phy.autoneg;
-	cmd->base.speed = pdata->phy.speed;
-	cmd->base.duplex = pdata->phy.duplex;
+	if (netif_carrier_ok(netdev)) {
+		cmd->base.speed = pdata->phy.speed;
+		cmd->base.duplex = pdata->phy.duplex;
+	} else {
+		cmd->base.speed = SPEED_UNKNOWN;
+		cmd->base.duplex = DUPLEX_UNKNOWN;
+	}
 
+	cmd->base.autoneg = pdata->phy.autoneg;
 	cmd->base.port = PORT_NONE;
 
 	XGBE_LM_COPY(cmd, supported, lks, supported);
-- 
2.42.0