From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
patches@lists.linux.dev, Victor Fragoso <victorffs@hotmail.com>,
Lars Melin <larsm17@gmail.com>, Johan Hovold <johan@kernel.org>
Subject: [PATCH 4.14 16/30] USB: serial: option: add Fibocom L7xx modules
Date: Tue, 5 Dec 2023 12:16:23 +0900 [thread overview]
Message-ID: <20231205031512.451532641@linuxfoundation.org> (raw)
In-Reply-To: <20231205031511.476698159@linuxfoundation.org>
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Victor Fragoso <victorffs@hotmail.com>
commit e389fe8b68137344562fb6e4d53d8a89ef6212dd upstream.
Add support for Fibocom L716-EU module series.
L716-EU is a Fibocom module based on ZTE's V3E/V3T chipset.
Device creates multiple interfaces when connected to PC as follows:
- Network Interface: ECM or RNDIS (set by FW or AT Command)
- ttyUSB0: AT port
- ttyUSB1: Modem port
- ttyUSB2: AT2 port
- ttyUSB3: Trace port for log information
- ADB: ADB port for debugging. ("Driver=usbfs" when ADB server enabled)
Here are the outputs of lsusb and usb-devices:
$ ls /dev/ttyUSB*
/dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2 /dev/ttyUSB3
usb-devices:
L716-EU (ECM mode):
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 51 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2cb7 ProdID=0001 Rev= 1.00
S: Manufacturer=Fibocom,Incorporated
S: Product=Fibocom Mobile Boardband
S: SerialNumber=1234567890ABCDEF
C:* #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=87(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
L716-EU (RNDIS mode):
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 49 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2cb7 ProdID=0001 Rev= 1.00
S: Manufacturer=Fibocom,Incorporated
S: Product=Fibocom Mobile Boardband
S: SerialNumber=1234567890ABCDEF
C:* #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=ff Driver=rndis_host
E: Ad=87(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Victor Fragoso <victorffs@hotmail.com>
Reviewed-by: Lars Melin <larsm17@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2253,6 +2253,7 @@ static const struct usb_device_id option
.driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
{ USB_DEVICE(0x1782, 0x4d10) }, /* Fibocom L610 (AT mode) */
{ USB_DEVICE_INTERFACE_CLASS(0x1782, 0x4d11, 0xff) }, /* Fibocom L610 (ECM/RNDIS mode) */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x0001, 0xff, 0xff, 0xff) }, /* Fibocom L716-EU (ECM/RNDIS mode) */
{ USB_DEVICE(0x2cb7, 0x0104), /* Fibocom NL678 series */
.driver_info = RSVD(4) | RSVD(5) },
{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff), /* Fibocom NL678 series */
next prev parent reply other threads:[~2023-12-05 3:19 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-05 3:16 [PATCH 4.14 00/30] 4.14.332-rc1 review Greg Kroah-Hartman
2023-12-05 3:16 ` [PATCH 4.14 01/30] RDMA/irdma: Prevent zero-length STAG registration Greg Kroah-Hartman
2023-12-05 3:16 ` [PATCH 4.14 02/30] drm/panel: simple: Fix Innolux G101ICE-L01 timings Greg Kroah-Hartman
2023-12-05 3:16 ` [PATCH 4.14 03/30] ata: pata_isapnp: Add missing error check for devm_ioport_map() Greg Kroah-Hartman
2023-12-05 3:16 ` [PATCH 4.14 04/30] drm/rockchip: vop: Fix color for RGB888/BGR888 format on VOP full Greg Kroah-Hartman
2023-12-05 3:16 ` [PATCH 4.14 05/30] ipv4: Correct/silence an endian warning in __ip_do_redirect Greg Kroah-Hartman
2023-12-05 3:16 ` [PATCH 4.14 06/30] net: usb: ax88179_178a: fix failed operations during ax88179_reset Greg Kroah-Hartman
2023-12-05 3:16 ` [PATCH 4.14 07/30] arm/xen: fix xen_vcpu_info allocation alignment Greg Kroah-Hartman
2023-12-05 3:16 ` [PATCH 4.14 08/30] amd-xgbe: handle corner-case during sfp hotplug Greg Kroah-Hartman
2023-12-05 3:16 ` [PATCH 4.14 09/30] amd-xgbe: propagate the correct speed and duplex status Greg Kroah-Hartman
2023-12-05 3:16 ` [PATCH 4.14 10/30] net: axienet: Fix check for partial TX checksum Greg Kroah-Hartman
2023-12-05 3:16 ` [PATCH 4.14 11/30] mtd: rawnand: brcmnand: Fix ecc chunk calculation for erased page bitfips Greg Kroah-Hartman
2023-12-05 3:16 ` [PATCH 4.14 12/30] s390/dasd: protect device queue against concurrent access Greg Kroah-Hartman
2023-12-05 3:16 ` [PATCH 4.14 13/30] USB: serial: option: add Luat Air72*U series products Greg Kroah-Hartman
2023-12-05 3:16 ` [PATCH 4.14 14/30] bcache: check return value from btree_node_alloc_replacement() Greg Kroah-Hartman
2023-12-05 3:16 ` [PATCH 4.14 15/30] bcache: prevent potential division by zero error Greg Kroah-Hartman
2023-12-05 3:16 ` Greg Kroah-Hartman [this message]
2023-12-05 3:16 ` [PATCH 4.14 17/30] USB: serial: option: fix FM101R-GL defines Greg Kroah-Hartman
2023-12-05 3:16 ` [PATCH 4.14 18/30] USB: serial: option: dont claim interface 4 for ZTE MF290 Greg Kroah-Hartman
2023-12-05 3:16 ` [PATCH 4.14 19/30] usb: dwc3: set the dma max_seg_size Greg Kroah-Hartman
2023-12-05 3:16 ` [PATCH 4.14 20/30] pinctrl: avoid reload of p state in list iteration Greg Kroah-Hartman
2023-12-05 3:16 ` [PATCH 4.14 21/30] firewire: core: fix possible memory leak in create_units() Greg Kroah-Hartman
2023-12-05 3:16 ` [PATCH 4.14 22/30] dm-verity: align struct dm_verity_fec_io properly Greg Kroah-Hartman
2023-12-05 3:16 ` [PATCH 4.14 23/30] dm verity: dont perform FEC for failed readahead IO Greg Kroah-Hartman
2023-12-05 3:16 ` [PATCH 4.14 24/30] powerpc: Dont clobber f0/vs0 during fp|altivec register save Greg Kroah-Hartman
2023-12-05 3:16 ` [PATCH 4.14 25/30] btrfs: fix off-by-one when checking chunk map includes logical address Greg Kroah-Hartman
2023-12-05 3:16 ` [PATCH 4.14 26/30] btrfs: send: ensure send_fd is writable Greg Kroah-Hartman
2023-12-05 3:16 ` [PATCH 4.14 27/30] ipv4: igmp: fix refcnt uaf issue when receiving igmp query packet Greg Kroah-Hartman
2023-12-05 3:16 ` [PATCH 4.14 28/30] ravb: Fix races between ravb_tx_timeout_work() and net related ops Greg Kroah-Hartman
2023-12-05 3:16 ` [PATCH 4.14 29/30] net: ravb: Start TX queues after HW initialization succeeded Greg Kroah-Hartman
2023-12-05 3:16 ` [PATCH 4.14 30/30] driver core: Release all resources during unbind before updating device links Greg Kroah-Hartman
2023-12-05 9:10 ` [PATCH 4.14 00/30] 4.14.332-rc1 review Harshit Mogalapalli
2023-12-05 10:37 ` Pavel Machek
2023-12-05 11:09 ` Jon Hunter
2023-12-05 14:01 ` Naresh Kamboju
2023-12-05 16:44 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231205031512.451532641@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=larsm17@gmail.com \
--cc=patches@lists.linux.dev \
--cc=stable@vger.kernel.org \
--cc=victorffs@hotmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox