[PATCH 4.19 32/71] USB: dwc3: qcom: fix wakeup after probe deferral

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan+linaro@kernel.org>

commit 41f5a0973259db9e4e3c9963d36505f80107d1a0 upstream.

The Qualcomm glue driver is overriding the interrupt trigger types
defined by firmware when requesting the wakeup interrupts during probe.

This can lead to a failure to map the DP/DM wakeup interrupts after a
probe deferral as the firmware defined trigger types do not match the
type used for the initial mapping:

	irq: type mismatch, failed to map hwirq-14 for interrupt-controller@b220000!
	irq: type mismatch, failed to map hwirq-15 for interrupt-controller@b220000!

Fix this by not overriding the firmware provided trigger types when
requesting the wakeup interrupts.

Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver")
Cc: stable@vger.kernel.org      # 4.18
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20231120161607.7405-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/dwc3-qcom.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -329,7 +329,7 @@ static int dwc3_qcom_setup_irq(struct pl
 		irq_set_status_flags(irq, IRQ_NOAUTOEN);
 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
 					qcom_dwc3_resume_irq,
-					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+					IRQF_ONESHOT,
 					"qcom_dwc3 HS", qcom);
 		if (ret) {
 			dev_err(qcom->dev, "hs_phy_irq failed: %d\n", ret);
@@ -343,7 +343,7 @@ static int dwc3_qcom_setup_irq(struct pl
 		irq_set_status_flags(irq, IRQ_NOAUTOEN);
 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
 					qcom_dwc3_resume_irq,
-					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+					IRQF_ONESHOT,
 					"qcom_dwc3 DP_HS", qcom);
 		if (ret) {
 			dev_err(qcom->dev, "dp_hs_phy_irq failed: %d\n", ret);
@@ -357,7 +357,7 @@ static int dwc3_qcom_setup_irq(struct pl
 		irq_set_status_flags(irq, IRQ_NOAUTOEN);
 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
 					qcom_dwc3_resume_irq,
-					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+					IRQF_ONESHOT,
 					"qcom_dwc3 DM_HS", qcom);
 		if (ret) {
 			dev_err(qcom->dev, "dm_hs_phy_irq failed: %d\n", ret);
@@ -371,7 +371,7 @@ static int dwc3_qcom_setup_irq(struct pl
 		irq_set_status_flags(irq, IRQ_NOAUTOEN);
 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
 					qcom_dwc3_resume_irq,
-					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+					IRQF_ONESHOT,
 					"qcom_dwc3 SS", qcom);
 		if (ret) {
 			dev_err(qcom->dev, "ss_phy_irq failed: %d\n", ret);