From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
patches@lists.linux.dev, linux-kernel@vger.kernel.org,
torvalds@linux-foundation.org, akpm@linux-foundation.org,
linux@roeck-us.net, shuah@kernel.org, patches@kernelci.org,
lkft-triage@lists.linaro.org, pavel@denx.de,
jonathanh@nvidia.com, f.fainelli@gmail.com,
sudipm.mukherjee@gmail.com, srw@sladewatkins.net, rwarsow@gmx.de,
conor@kernel.org, allen.lkml@gmail.com
Subject: [PATCH 5.4 00/90] 5.4.263-rc3 review
Date: Wed, 6 Dec 2023 04:22:16 +0900 [thread overview]
Message-ID: <20231205183241.636315882@linuxfoundation.org> (raw)
This is the start of the stable review cycle for the 5.4.263 release.
There are 90 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Thu, 07 Dec 2023 18:32:16 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.263-rc3.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linux 5.4.263-rc3
Adrian Hunter <adrian.hunter@intel.com>
mmc: block: Retry commands in CQE error recovery
Zheng Yongjun <zhengyongjun3@huawei.com>
mmc: core: convert comma to semicolon
Adrian Hunter <adrian.hunter@intel.com>
mmc: cqhci: Fix task clearing in CQE error recovery
Adrian Hunter <adrian.hunter@intel.com>
mmc: cqhci: Warn of halt or task clear failure
Adrian Hunter <adrian.hunter@intel.com>
mmc: cqhci: Increase recovery halt timeout
Christoph Niedermaier <cniedermaier@dh-electronics.com>
cpufreq: imx6q: Don't disable 792 Mhz OPP unnecessarily
Christoph Niedermaier <cniedermaier@dh-electronics.com>
cpufreq: imx6q: don't warn for disabling a non-existing frequency
Quinn Tran <qutran@marvell.com>
scsi: qla2xxx: Fix system crash due to bad pointer access
Bart Van Assche <bvanassche@acm.org>
scsi: qla2xxx: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
Bart Van Assche <bvanassche@acm.org>
scsi: core: Introduce the scsi_cmd_to_rq() function
Bart Van Assche <bvanassche@acm.org>
scsi: qla2xxx: Simplify the code for aborting SCSI commands
Mimi Zohar <zohar@linux.ibm.com>
ima: detect changes to the backing overlay file
Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
ovl: skip overlayfs superblocks at global sync
Amir Goldstein <amir73il@gmail.com>
ima: annotate iint mutex to avoid lockdep false positive warnings
Helge Deller <deller@gmx.de>
fbdev: stifb: Make the STI next font pointer a 32-bit signed offset
Linus Walleij <linus.walleij@linaro.org>
mtd: cfi_cmdset_0001: Byte swap OTP info
Jean-Philippe Brucker <jean-philippe@linaro.org>
mtd: cfi_cmdset_0001: Support the absence of protection registers
Heiko Carstens <hca@linux.ibm.com>
s390/cmma: fix detection of DAT pages
Alexander Gordeev <agordeev@linux.ibm.com>
s390/mm: fix phys vs virt confusion in mark_kernel_pXd() functions family
Steve French <stfrench@microsoft.com>
smb3: fix touch -h of symlink
Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
net: ravb: Start TX queues after HW initialization succeeded
Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
net: ravb: Use pm_runtime_resume_and_get()
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
ravb: Fix races between ravb_tx_timeout_work() and net related ops
Furong Xu <0x1207@gmail.com>
net: stmmac: xgmac: Disable FPE MMC interrupts
Zhengchao Shao <shaozhengchao@huawei.com>
ipv4: igmp: fix refcnt uaf issue when receiving igmp query packet
Max Nguyen <maxwell.nguyen@hp.com>
Input: xpad - add HyperX Clutch Gladiate Support
Filipe Manana <fdmanana@suse.com>
btrfs: make error messages more clear when getting a chunk map
Jann Horn <jannh@google.com>
btrfs: send: ensure send_fd is writable
Filipe Manana <fdmanana@suse.com>
btrfs: fix off-by-one when checking chunk map includes logical address
Qu Wenruo <wqu@suse.com>
btrfs: add dmesg output for first mount and last unmount of a filesystem
Timothy Pearson <tpearson@raptorengineering.com>
powerpc: Don't clobber f0/vs0 during fp|altivec register save
Markus Weippert <markus@gekmihesg.de>
bcache: revert replacing IS_ERR_OR_NULL with IS_ERR
Wu Bo <bo.wu@vivo.com>
dm verity: don't perform FEC for failed readahead IO
Mikulas Patocka <mpatocka@redhat.com>
dm-verity: align struct dm_verity_fec_io properly
Kailang Yang <kailang@realtek.com>
ALSA: hda/realtek: Add supported ALC257 for ChromeOS
Kailang Yang <kailang@realtek.com>
ALSA: hda/realtek: Headset Mic VREF to 100%
Takashi Iwai <tiwai@suse.de>
ALSA: hda: Disable power-save on KONTRON SinglePC
Adrian Hunter <adrian.hunter@intel.com>
mmc: block: Do not lose cache flush during CQE error recovery
Yang Yingliang <yangyingliang@huawei.com>
firewire: core: fix possible memory leak in create_units()
Maria Yu <quic_aiquny@quicinc.com>
pinctrl: avoid reload of p state in list iteration
Keith Busch <kbusch@kernel.org>
io_uring: fix off-by one bvec index
Johan Hovold <johan+linaro@kernel.org>
USB: dwc3: qcom: fix wakeup after probe deferral
Johan Hovold <johan+linaro@kernel.org>
USB: dwc3: qcom: fix resource leaks on probe deferral
Ricardo Ribalda <ribalda@chromium.org>
usb: dwc3: set the dma max_seg_size
Oliver Neukum <oneukum@suse.com>
USB: dwc2: write HCINT with INTMASK applied
Lech Perczak <lech.perczak@gmail.com>
USB: serial: option: don't claim interface 4 for ZTE MF290
Puliang Lu <puliang.lu@fibocom.com>
USB: serial: option: fix FM101R-GL defines
Victor Fragoso <victorffs@hotmail.com>
USB: serial: option: add Fibocom L7xx modules
Rand Deeb <rand.sec96@gmail.com>
bcache: prevent potential division by zero error
Coly Li <colyli@suse.de>
bcache: check return value from btree_node_alloc_replacement()
Mikulas Patocka <mpatocka@redhat.com>
dm-delay: fix a race between delay_presuspend and delay_bio
Long Li <longli@microsoft.com>
hv_netvsc: Mark VF as slave before exposing it to user-mode
Haiyang Zhang <haiyangz@microsoft.com>
hv_netvsc: Fix race of register_netdevice_notifier and VF register
Asuna Yang <spriteovo@gmail.com>
USB: serial: option: add Luat Air72*U series products
Jan Höppner <hoeppner@linux.ibm.com>
s390/dasd: protect device queue against concurrent access
Coly Li <colyli@suse.de>
bcache: replace a mistaken IS_ERR() by IS_ERR_OR_NULL() in btree_gc_coalesce()
Hans de Goede <hdegoede@redhat.com>
ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CVA
Andrew Murray <andrew.murray@arm.com>
KVM: arm64: limit PMU version to PMUv3 for ARMv8.1
Andrew Murray <andrew.murray@arm.com>
arm64: cpufeature: Extract capped perfmon fields
Zhang Yi <yi.zhang@huawei.com>
ext4: make sure allocate pending entry not fail
Baokun Li <libaokun1@huawei.com>
ext4: fix slab-use-after-free in ext4_es_insert_extent()
Baokun Li <libaokun1@huawei.com>
ext4: using nofail preallocation in ext4_es_insert_extent()
Baokun Li <libaokun1@huawei.com>
ext4: using nofail preallocation in ext4_es_insert_delayed_block()
Baokun Li <libaokun1@huawei.com>
ext4: using nofail preallocation in ext4_es_remove_extent()
Baokun Li <libaokun1@huawei.com>
ext4: use pre-allocated es in __es_remove_extent()
Baokun Li <libaokun1@huawei.com>
ext4: use pre-allocated es in __es_insert_extent()
Baokun Li <libaokun1@huawei.com>
ext4: factor out __es_alloc_extent() and __es_free_extent()
Baokun Li <libaokun1@huawei.com>
ext4: add a new helper to check if es must be kept
Huacai Chen <chenhuacai@loongson.cn>
MIPS: KVM: Fix a build warning about variable set but not used
Christoph Hellwig <hch@lst.de>
nvmet: nul-terminate the NQNs passed in the connect command
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
nvmet: remove unnecessary ctrl parameter
David Howells <dhowells@redhat.com>
afs: Fix file locking on R/O volumes to operate in local mode
David Howells <dhowells@redhat.com>
afs: Return ENOENT if no cell DNS record can be found
Samuel Holland <samuel.holland@sifive.com>
net: axienet: Fix check for partial TX checksum
Raju Rangoju <Raju.Rangoju@amd.com>
amd-xgbe: propagate the correct speed and duplex status
Raju Rangoju <Raju.Rangoju@amd.com>
amd-xgbe: handle the corner-case during tx completion
Raju Rangoju <Raju.Rangoju@amd.com>
amd-xgbe: handle corner-case during sfp hotplug
Stefano Stabellini <sstabellini@kernel.org>
arm/xen: fix xen_vcpu_info allocation alignment
Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
net: usb: ax88179_178a: fix failed operations during ax88179_reset
Kunwu Chan <chentao@kylinos.cn>
ipv4: Correct/silence an endian warning in __ip_do_redirect
Charles Yi <be286@163.com>
HID: fix HID device resource race between HID core and debugging support
Benjamin Tissoires <benjamin.tissoires@redhat.com>
HID: core: store the unique system identifier in hid_device
Jonas Karlman <jonas@kwiboo.se>
drm/rockchip: vop: Fix color for RGB888/BGR888 format on VOP full
Chen Ni <nichen@iscas.ac.cn>
ata: pata_isapnp: Add missing error check for devm_ioport_map()
Marek Vasut <marex@denx.de>
drm/panel: simple: Fix Innolux G101ICE-L01 timings
Marek Vasut <marex@denx.de>
drm/panel: simple: Fix Innolux G101ICE-L01 bus flags
David Howells <dhowells@redhat.com>
afs: Make error on cell lookup failure consistent with OpenAFS
Nathan Chancellor <nathan@kernel.org>
PCI: keystone: Drop __init from ks_pcie_add_pcie_{ep,port}()
Christopher Bednarz <christopher.n.bednarz@intel.com>
RDMA/irdma: Prevent zero-length STAG registration
Saravana Kannan <saravanak@google.com>
driver core: Release all resources during unbind before updating device links
-------------
Diffstat:
Makefile | 4 +-
arch/arm/xen/enlighten.c | 3 +-
arch/arm64/include/asm/cpufeature.h | 23 ++
arch/arm64/include/asm/sysreg.h | 6 +
arch/arm64/kvm/sys_regs.c | 10 +
arch/mips/kvm/mmu.c | 3 +-
arch/powerpc/kernel/fpu.S | 13 +
arch/powerpc/kernel/vector.S | 2 +
arch/s390/mm/page-states.c | 14 +-
drivers/acpi/resource.c | 7 +
drivers/ata/pata_isapnp.c | 3 +
drivers/base/dd.c | 4 +-
drivers/cpufreq/imx6q-cpufreq.c | 32 +--
drivers/firewire/core-device.c | 11 +-
drivers/gpu/drm/panel/panel-simple.c | 13 +-
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 14 +-
drivers/hid/hid-core.c | 16 +-
drivers/hid/hid-debug.c | 3 +
drivers/infiniband/hw/i40iw/i40iw_ctrl.c | 6 +
drivers/infiniband/hw/i40iw/i40iw_type.h | 2 +
drivers/infiniband/hw/i40iw/i40iw_verbs.c | 10 +-
drivers/input/joystick/xpad.c | 2 +
drivers/md/bcache/btree.c | 6 +-
drivers/md/bcache/sysfs.c | 2 +-
drivers/md/dm-delay.c | 17 +-
drivers/md/dm-verity-fec.c | 3 +-
drivers/md/dm-verity-target.c | 4 +-
drivers/md/dm-verity.h | 6 -
drivers/mmc/core/block.c | 2 +
drivers/mmc/core/core.c | 15 +-
drivers/mmc/host/cqhci.c | 44 ++--
drivers/mtd/chips/cfi_cmdset_0001.c | 29 +-
drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 14 +
drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c | 11 +-
drivers/net/ethernet/amd/xgbe/xgbe-mdio.c | 14 +-
drivers/net/ethernet/renesas/ravb_main.c | 20 +-
drivers/net/ethernet/stmicro/stmmac/mmc_core.c | 4 +
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 2 +-
drivers/net/hyperv/netvsc_drv.c | 41 ++-
drivers/net/usb/ax88179_178a.c | 4 +-
drivers/nvme/target/core.c | 21 +-
drivers/nvme/target/fabrics-cmd.c | 15 +-
drivers/nvme/target/nvmet.h | 5 +-
drivers/pci/controller/dwc/pci-keystone.c | 8 +-
drivers/pinctrl/core.c | 6 +-
drivers/s390/block/dasd.c | 24 +-
drivers/scsi/qla2xxx/qla_def.h | 3 -
drivers/scsi/qla2xxx/qla_isr.c | 5 -
drivers/scsi/qla2xxx/qla_os.c | 39 +--
drivers/usb/dwc2/hcd_intr.c | 15 +-
drivers/usb/dwc3/core.c | 2 +
drivers/usb/dwc3/dwc3-qcom.c | 17 +-
drivers/usb/serial/option.c | 11 +-
drivers/video/fbdev/sticore.h | 2 +-
fs/afs/dynroot.c | 4 +-
fs/afs/super.c | 2 +
fs/afs/vl_rotate.c | 10 +
fs/btrfs/disk-io.c | 1 +
fs/btrfs/send.c | 2 +-
fs/btrfs/super.c | 5 +-
fs/btrfs/volumes.c | 9 +-
fs/cifs/cifsfs.c | 1 +
fs/ext4/extents_status.c | 306 +++++++++++++++-------
fs/io_uring.c | 2 +-
fs/overlayfs/super.c | 5 +-
fs/sync.c | 3 +-
include/linux/fs.h | 2 +
include/linux/hid.h | 5 +
include/scsi/scsi_cmnd.h | 6 +
net/ipv4/igmp.c | 6 +-
net/ipv4/route.c | 2 +-
security/integrity/iint.c | 48 +++-
security/integrity/ima/ima_api.c | 5 +
security/integrity/ima/ima_main.c | 16 +-
security/integrity/integrity.h | 2 +
sound/pci/hda/hda_intel.c | 2 +
sound/pci/hda/patch_realtek.c | 12 +
77 files changed, 753 insertions(+), 315 deletions(-)
next reply other threads:[~2023-12-05 19:22 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-05 19:22 Greg Kroah-Hartman [this message]
2023-12-05 21:48 ` [PATCH 5.4 00/90] 5.4.263-rc3 review Florian Fainelli
2023-12-06 11:18 ` Harshit Mogalapalli
2023-12-06 11:49 ` Jon Hunter
2023-12-06 13:15 ` Naresh Kamboju
2023-12-06 16:05 ` Shuah Khan
2023-12-06 18:44 ` Guenter Roeck
2023-12-08 18:09 ` Guenter Roeck
2023-12-11 14:56 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231205183241.636315882@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=allen.lkml@gmail.com \
--cc=conor@kernel.org \
--cc=f.fainelli@gmail.com \
--cc=jonathanh@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lkft-triage@lists.linaro.org \
--cc=patches@kernelci.org \
--cc=patches@lists.linux.dev \
--cc=pavel@denx.de \
--cc=rwarsow@gmx.de \
--cc=shuah@kernel.org \
--cc=srw@sladewatkins.net \
--cc=stable@vger.kernel.org \
--cc=sudipm.mukherjee@gmail.com \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox