[PATCH v2 1/3] tracing: Always update snapshot buffer size

[PATCH v2 1/3] tracing: Always update snapshot buffer size

[Steven Rostedt]

From: "Steven Rostedt (Google)" <rostedt@goodmis.org>

It use to be that only the top level instance had a snapshot buffer (for
latency tracers like wakeup and irqsoff). The update of the ring buffer
size would check if the instance was the top level and if so, it would
also update the snapshot buffer as it needs to be the same as the main
buffer.

Now that lower level instances also has a snapshot buffer, they too need
to update their snapshot buffer sizes when the main buffer is changed,
otherwise the following can be triggered:

 # cd /sys/kernel/tracing
 # echo 1500 > buffer_size_kb
 # mkdir instances/foo
 # echo irqsoff > instances/foo/current_tracer
 # echo 1000 > instances/foo/buffer_size_kb

Produces:

 WARNING: CPU: 2 PID: 856 at kernel/trace/trace.c:1938 update_max_tr_single.part.0+0x27d/0x320

Which is:

	ret = ring_buffer_swap_cpu(tr->max_buffer.buffer, tr->array_buffer.buffer, cpu);

	if (ret == -EBUSY) {
		[..]
	}

	WARN_ON_ONCE(ret && ret != -EAGAIN && ret != -EBUSY);  <== here

That's because ring_buffer_swap_cpu() has:

	int ret = -EINVAL;

	[..]

	/* At least make sure the two buffers are somewhat the same */
	if (cpu_buffer_a->nr_pages != cpu_buffer_b->nr_pages)
		goto out;

	[..]
 out:
	return ret;
 }

Instead, update all instances' snapshot buffer sizes when their main
buffer size is updated.

Cc: stable@vger.kernel.org
Fixes: 6d9b3fa5e7f6 ("tracing: Move tracing_max_latency into trace_array")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
---
 kernel/trace/trace.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 9aebf904ff97..231c173ec04f 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -6392,8 +6392,7 @@ static int __tracing_resize_ring_buffer(struct trace_array *tr,
 		return ret;
 
 #ifdef CONFIG_TRACER_MAX_TRACE
-	if (!(tr->flags & TRACE_ARRAY_FL_GLOBAL) ||
-	    !tr->current_trace->use_max_tr)
+	if (!tr->current_trace->use_max_tr)
 		goto out;
 
 	ret = ring_buffer_resize(tr->max_buffer.buffer, size, cpu);
-- 
2.42.0

[PATCH v2 2/3] tracing: Stop current tracer when resizing buffer

[Steven Rostedt]

From: "Steven Rostedt (Google)" <rostedt@goodmis.org>

When the ring buffer is being resized, it can cause side effects to the
running tracer. For instance, there's a race with irqsoff tracer that
swaps individual per cpu buffers between the main buffer and the snapshot
buffer. The resize operation modifies the main buffer and then the
snapshot buffer. If a swap happens in between those two operations it will
break the tracer.

Simply stop the running tracer before resizing the buffers and enable it
again when finished.

Cc: stable@vger.kernel.org
Fixes: 3928a8a2d9808 ("ftrace: make work with new ring buffer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
---
 kernel/trace/trace.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 231c173ec04f..e978868b1a22 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -6387,9 +6387,12 @@ static int __tracing_resize_ring_buffer(struct trace_array *tr,
 	if (!tr->array_buffer.buffer)
 		return 0;
 
+	/* Do not allow tracing while resizng ring buffer */
+	tracing_stop_tr(tr);
+
 	ret = ring_buffer_resize(tr->array_buffer.buffer, size, cpu);
 	if (ret < 0)
-		return ret;
+		goto out_start;
 
 #ifdef CONFIG_TRACER_MAX_TRACE
 	if (!tr->current_trace->use_max_tr)
@@ -6417,7 +6420,7 @@ static int __tracing_resize_ring_buffer(struct trace_array *tr,
 			WARN_ON(1);
 			tracing_disabled = 1;
 		}
-		return ret;
+		goto out_start;
 	}
 
 	update_buffer_entries(&tr->max_buffer, cpu);
@@ -6426,7 +6429,8 @@ static int __tracing_resize_ring_buffer(struct trace_array *tr,
 #endif /* CONFIG_TRACER_MAX_TRACE */
 
 	update_buffer_entries(&tr->array_buffer, cpu);
-
+ out_start:
+	tracing_start_tr(tr);
 	return ret;
 }
 
-- 
2.42.0

[PATCH v2 3/3] tracing: Disable snapshot buffer when stopping instance tracers

[Steven Rostedt]

From: "Steven Rostedt (Google)" <rostedt@goodmis.org>

It use to be that only the top level instance had a snapshot buffer (for
latency tracers like wakeup and irqsoff). When stopping a tracer in an
instance would not disable the snapshot buffer. This could have some
unintended consequences if the irqsoff tracer is enabled.

Consolidate the tracing_start/stop() with tracing_start/stop_tr() so that
all instances behave the same. The tracing_start/stop() functions will
just call their respective tracing_start/stop_tr() with the global_array
passed in.

Cc: stable@vger.kernel.org
Fixes: 6d9b3fa5e7f6 ("tracing: Move tracing_max_latency into trace_array")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
---
 kernel/trace/trace.c | 110 +++++++++++++------------------------------
 1 file changed, 34 insertions(+), 76 deletions(-)

diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index e978868b1a22..2492c6c76850 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -2360,13 +2360,7 @@ int is_tracing_stopped(void)
 	return global_trace.stop_count;
 }
 
-/**
- * tracing_start - quick start of the tracer
- *
- * If tracing is enabled but was stopped by tracing_stop,
- * this will start the tracer back up.
- */
-void tracing_start(void)
+static void tracing_start_tr(struct trace_array *tr)
 {
 	struct trace_buffer *buffer;
 	unsigned long flags;
@@ -2374,119 +2368,83 @@ void tracing_start(void)
 	if (tracing_disabled)
 		return;
 
-	raw_spin_lock_irqsave(&global_trace.start_lock, flags);
-	if (--global_trace.stop_count) {
-		if (global_trace.stop_count < 0) {
+	raw_spin_lock_irqsave(&tr->start_lock, flags);
+	if (--tr->stop_count) {
+		if (WARN_ON_ONCE(tr->stop_count < 0)) {
 			/* Someone screwed up their debugging */
-			WARN_ON_ONCE(1);
-			global_trace.stop_count = 0;
+			tr->stop_count = 0;
 		}
 		goto out;
 	}
 
 	/* Prevent the buffers from switching */
-	arch_spin_lock(&global_trace.max_lock);
+	arch_spin_lock(&tr->max_lock);
 
-	buffer = global_trace.array_buffer.buffer;
+	buffer = tr->array_buffer.buffer;
 	if (buffer)
 		ring_buffer_record_enable(buffer);
 
 #ifdef CONFIG_TRACER_MAX_TRACE
-	buffer = global_trace.max_buffer.buffer;
+	buffer = tr->max_buffer.buffer;
 	if (buffer)
 		ring_buffer_record_enable(buffer);
 #endif
 
-	arch_spin_unlock(&global_trace.max_lock);
-
- out:
-	raw_spin_unlock_irqrestore(&global_trace.start_lock, flags);
-}
-
-static void tracing_start_tr(struct trace_array *tr)
-{
-	struct trace_buffer *buffer;
-	unsigned long flags;
-
-	if (tracing_disabled)
-		return;
-
-	/* If global, we need to also start the max tracer */
-	if (tr->flags & TRACE_ARRAY_FL_GLOBAL)
-		return tracing_start();
-
-	raw_spin_lock_irqsave(&tr->start_lock, flags);
-
-	if (--tr->stop_count) {
-		if (tr->stop_count < 0) {
-			/* Someone screwed up their debugging */
-			WARN_ON_ONCE(1);
-			tr->stop_count = 0;
-		}
-		goto out;
-	}
-
-	buffer = tr->array_buffer.buffer;
-	if (buffer)
-		ring_buffer_record_enable(buffer);
+	arch_spin_unlock(&tr->max_lock);
 
  out:
 	raw_spin_unlock_irqrestore(&tr->start_lock, flags);
 }
 
 /**
- * tracing_stop - quick stop of the tracer
+ * tracing_start - quick start of the tracer
  *
- * Light weight way to stop tracing. Use in conjunction with
- * tracing_start.
+ * If tracing is enabled but was stopped by tracing_stop,
+ * this will start the tracer back up.
  */
-void tracing_stop(void)
+void tracing_start(void)
+
+{
+	return tracing_start_tr(&global_trace);
+}
+
+static void tracing_stop_tr(struct trace_array *tr)
 {
 	struct trace_buffer *buffer;
 	unsigned long flags;
 
-	raw_spin_lock_irqsave(&global_trace.start_lock, flags);
-	if (global_trace.stop_count++)
+	raw_spin_lock_irqsave(&tr->start_lock, flags);
+	if (tr->stop_count++)
 		goto out;
 
 	/* Prevent the buffers from switching */
-	arch_spin_lock(&global_trace.max_lock);
+	arch_spin_lock(&tr->max_lock);
 
-	buffer = global_trace.array_buffer.buffer;
+	buffer = tr->array_buffer.buffer;
 	if (buffer)
 		ring_buffer_record_disable(buffer);
 
 #ifdef CONFIG_TRACER_MAX_TRACE
-	buffer = global_trace.max_buffer.buffer;
+	buffer = tr->max_buffer.buffer;
 	if (buffer)
 		ring_buffer_record_disable(buffer);
 #endif
 
-	arch_spin_unlock(&global_trace.max_lock);
+	arch_spin_unlock(&tr->max_lock);
 
  out:
-	raw_spin_unlock_irqrestore(&global_trace.start_lock, flags);
+	raw_spin_unlock_irqrestore(&tr->start_lock, flags);
 }
 
-static void tracing_stop_tr(struct trace_array *tr)
+/**
+ * tracing_stop - quick stop of the tracer
+ *
+ * Light weight way to stop tracing. Use in conjunction with
+ * tracing_start.
+ */
+void tracing_stop(void)
 {
-	struct trace_buffer *buffer;
-	unsigned long flags;
-
-	/* If global, we need to also stop the max tracer */
-	if (tr->flags & TRACE_ARRAY_FL_GLOBAL)
-		return tracing_stop();
-
-	raw_spin_lock_irqsave(&tr->start_lock, flags);
-	if (tr->stop_count++)
-		goto out;
-
-	buffer = tr->array_buffer.buffer;
-	if (buffer)
-		ring_buffer_record_disable(buffer);
-
- out:
-	raw_spin_unlock_irqrestore(&tr->start_lock, flags);
+	return tracing_stop_tr(&global_trace);
 }
 
 static int trace_save_cmdline(struct task_struct *tsk)
-- 
2.42.0