[PATCH v3] net: usb: ax88179_178a: avoid failed operations when device is disconnected

[PATCH v3] net: usb: ax88179_178a: avoid failed operations when device is disconnected

[Jose Ignacio Tornos Martinez]

When the device is disconnected we get the following messages showing
failed operations:
Nov 28 20:22:11 localhost kernel: usb 2-3: USB disconnect, device number 2
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: unregister 'ax88179_178a' usb-0000:02:00.0-3, ASIX AX88179 USB 3.0 Gigabit Ethernet
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to read reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to write reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0001: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19

The reason is that although the device is detached, normal stop and
unbind operations are commanded from the driver. These operations are
not necessary in this situation, so avoid these logs when the device is
detached if the result of the operation is -ENODEV and if the new flag
informing about the stopping or unbind operation is enabled.

cc: stable@vger.kernel.org
Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
---
V1 -> V2:
- Follow the suggestions from Alan Stern and Oliver Neukum to check the
result of the operations (-ENODEV) and not the internal state of the USB 
layer (USB_STATE_NOTATTACHED).
V2 -> V3
- Add cc: stable line in the signed-off-by area.

 drivers/net/usb/ax88179_178a.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index 4ea0e155bb0d..105bae360128 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -173,6 +173,7 @@ struct ax88179_data {
 	u8 in_pm;
 	u32 wol_supported;
 	u32 wolopts;
+	u8 stopping_unbinding;
 };
 
 struct ax88179_int_data {
@@ -208,6 +209,7 @@ static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 {
 	int ret;
 	int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
+	struct ax88179_data *ax179_data = dev->driver_priv;
 
 	BUG_ON(!dev);
 
@@ -219,7 +221,7 @@ static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 	ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 		 value, index, data, size);
 
-	if (unlikely(ret < 0))
+	if (unlikely(ret < 0 && !(ret == -ENODEV && ax179_data->stopping_unbinding)))
 		netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
 			    index, ret);
 
@@ -231,6 +233,7 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 {
 	int ret;
 	int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
+	struct ax88179_data *ax179_data = dev->driver_priv;
 
 	BUG_ON(!dev);
 
@@ -242,7 +245,7 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 	ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 		 value, index, data, size);
 
-	if (unlikely(ret < 0))
+	if (unlikely(ret < 0 && !(ret == -ENODEV && ax179_data->stopping_unbinding)))
 		netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n",
 			    index, ret);
 
@@ -1308,6 +1311,8 @@ static void ax88179_unbind(struct usbnet *dev, struct usb_interface *intf)
 	struct ax88179_data *ax179_data = dev->driver_priv;
 	u16 tmp16;
 
+	ax179_data->stopping_unbinding = 1;
+
 	/* Configure RX control register => stop operation */
 	tmp16 = AX_RX_CTL_STOP;
 	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, &tmp16);
@@ -1319,6 +1324,8 @@ static void ax88179_unbind(struct usbnet *dev, struct usb_interface *intf)
 	tmp16 = 0;
 	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, &tmp16);
 
+	ax179_data->stopping_unbinding = 0;
+
 	kfree(ax179_data);
 }
 
@@ -1661,14 +1668,19 @@ static int ax88179_reset(struct usbnet *dev)
 
 static int ax88179_stop(struct usbnet *dev)
 {
+	struct ax88179_data *ax179_data = dev->driver_priv;
 	u16 tmp16;
 
+	ax179_data->stopping_unbinding = 1;
+
 	ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
 			 2, 2, &tmp16);
 	tmp16 &= ~AX_MEDIUM_RECEIVE_EN;
 	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
 			  2, 2, &tmp16);
 
+	ax179_data->stopping_unbinding = 0;
+
 	return 0;
 }
 
-- 
2.43.0

Re: [PATCH v3] net: usb: ax88179_178a: avoid failed operations when device is disconnected

[Alan Stern]

On Fri, Dec 01, 2023 at 02:26:47PM +0100, Jose Ignacio Tornos Martinez wrote:
> When the device is disconnected we get the following messages showing
> failed operations:
> Nov 28 20:22:11 localhost kernel: usb 2-3: USB disconnect, device number 2
> Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: unregister 'ax88179_178a' usb-0000:02:00.0-3, ASIX AX88179 USB 3.0 Gigabit Ethernet
> Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to read reg index 0x0002: -19
> Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to write reg index 0x0002: -19
> Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19
> Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0001: -19
> Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19
> 
> The reason is that although the device is detached, normal stop and
> unbind operations are commanded from the driver. These operations are
> not necessary in this situation, so avoid these logs when the device is
> detached if the result of the operation is -ENODEV and if the new flag
> informing about the stopping or unbind operation is enabled.
> 
> cc: stable@vger.kernel.org
> Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>

> @@ -242,7 +245,7 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
>  	ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
>  		 value, index, data, size);
>  
> -	if (unlikely(ret < 0))
> +	if (unlikely(ret < 0 && !(ret == -ENODEV && ax179_data->stopping_unbinding)))

Would it be good enough just to check for ret != -ENODEV and not do the 
stopping_unbinding check at all?

Alan Stern

Re: [PATCH v3] net: usb: ax88179_178a: avoid failed operations when device is disconnected

[Jose Ignacio Tornos Martinez]

Hi Alan,

> Would it be good enough just to check for ret != -ENODEV and not do the 
> stopping_unbinding check at all?
I thought about that but if possible, I would like to ignore the failed
operation messages only under a controlled and expected situation. 
I think that if there is a problem with the device it will be easier to
analyze it later with all the possible information.
But this is my opinion ...

Thank you

Best regards
José Ignacio

Re: [PATCH v3] net: usb: ax88179_178a: avoid failed operations when device is disconnected

[Oliver Neukum]

On 01.12.23 14:26, Jose Ignacio Tornos Martinez wrote:
Hi,

this is much better.
   
> @@ -1661,14 +1668,19 @@ static int ax88179_reset(struct usbnet *dev)
>   
>   static int ax88179_stop(struct usbnet *dev)
>   {
> +	struct ax88179_data *ax179_data = dev->driver_priv;
>   	u16 tmp16;
>   
> +	ax179_data->stopping_unbinding = 1;

This is problematic. ndo_stop() is not limited to disconnection.
It is also used whenever an interface transitions from up to down.

> +
>   	ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
>   			 2, 2, &tmp16);
>   	tmp16 &= ~AX_MEDIUM_RECEIVE_EN;
>   	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
>   			  2, 2, &tmp16);
>   
> +	ax179_data->stopping_unbinding = 0;
> +
>   	return 0;
>   }
>   

On a general note, you are going for a belt and suspenders approach.
It seems to me that you have two options.

1. Do as Alan suggested and ignore ENODEV. You'd be acknowledging that
these devices are hotpluggable and therefore -ENODEV is not an error
2. Use only a flag. But if you do that, you are setting it in the wrong
place. It should be set in usbnet_disconnect()

O and, well, this is a very mior issue, but you've introduced a memory
ordering issue. You ought to use smp_wmb() after setting the flag and
smp_rmb() before reading it.

	Regards
		Oliver

Re: [PATCH v3] net: usb: ax88179_178a: avoid failed operations when device is disconnected

[Jose Ignacio Tornos Martinez]

Hi Oliver,

> this is much better.
>> ...
> This is problematic. ndo_stop() is not limited to disconnection.
> It is also used whenever an interface transitions from up to down.
>> ...
>
> On a general note, you are going for a belt and suspenders approach.
> It seems to me that you have two options.
> 1. Do as Alan suggested and ignore ENODEV. You'd be acknowledging that
> these devices are hotpluggable and therefore -ENODEV is not an error
> 2. Use only a flag. But if you do that, you are setting it in the wrong
> place. It should be set in usbnet_disconnect()
Thank you for you help, I will do what you say.
I would like to try 2 first so that it only affects the unbind operation.
If I find any problem, I will try 1.

> O and, well, this is a very mior issue, but you've introduced a memory
> ordering issue. You ought to use smp_wmb() after setting the flag and
> smp_rmb() before reading it.
Thank you again, I'll keep that in mind

Best regards
José Ignacio

[PATCH v4] net: usb: ax88179_178a: avoid failed operations when device is disconnected

[Jose Ignacio Tornos Martinez]

When the device is disconnected we get the following messages showing
failed operations:
Nov 28 20:22:11 localhost kernel: usb 2-3: USB disconnect, device number 2
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: unregister 'ax88179_178a' usb-0000:02:00.0-3, ASIX AX88179 USB 3.0 Gigabit Ethernet
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to read reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to write reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0001: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19

The reason is that although the device is detached, normal stop and
unbind operations are commanded from the driver. These operations are
not necessary in this situation, so avoid these logs when the device is
detached if the result of the operation is -ENODEV and if the new flag
informing about the disconnecting status is enabled.

cc: stable@vger.kernel.org
Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
---
V1 -> V2:
- Follow the suggestions from Alan Stern and Oliver Neukum to check the
result of the operations (-ENODEV) and not the internal state of the USB 
layer (USB_STATE_NOTATTACHED).
V2 -> V3
- Add cc: stable line in the signed-off-by area.
V3 -> V4
- Follow the suggestions from Oliver Neukum to use only one flag when
disconnecting and include barriers to avoid memory ordering issues.

 drivers/net/usb/ax88179_178a.c | 38 +++++++++++++++++++++++++++-------
 1 file changed, 31 insertions(+), 7 deletions(-)

diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index 4ea0e155bb0d..1c671f2a43ee 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -173,6 +173,7 @@ struct ax88179_data {
 	u8 in_pm;
 	u32 wol_supported;
 	u32 wolopts;
+	u8 disconnecting;
 };
 
 struct ax88179_int_data {
@@ -208,6 +209,7 @@ static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 {
 	int ret;
 	int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
+	struct ax88179_data *ax179_data = dev->driver_priv;
 
 	BUG_ON(!dev);
 
@@ -219,9 +221,12 @@ static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 	ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 		 value, index, data, size);
 
-	if (unlikely(ret < 0))
-		netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
-			    index, ret);
+	if (unlikely(ret < 0)) {
+		smp_rmb();
+		if (!(ret == -ENODEV && ax179_data->disconnecting))
+			netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
+				    index, ret);
+	}
 
 	return ret;
 }
@@ -231,6 +236,7 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 {
 	int ret;
 	int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
+	struct ax88179_data *ax179_data = dev->driver_priv;
 
 	BUG_ON(!dev);
 
@@ -242,9 +248,12 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 	ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 		 value, index, data, size);
 
-	if (unlikely(ret < 0))
-		netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n",
-			    index, ret);
+	if (unlikely(ret < 0)) {
+		smp_rmb();
+		if (!(ret == -ENODEV && ax179_data->disconnecting))
+			netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n",
+				    index, ret);
+	}
 
 	return ret;
 }
@@ -492,6 +501,21 @@ static int ax88179_resume(struct usb_interface *intf)
 	return usbnet_resume(intf);
 }
 
+static void ax88179_disconnect(struct usb_interface *intf)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct ax88179_data *ax179_data;
+
+	if (!dev)
+		return;
+
+	ax179_data = dev->driver_priv;
+	ax179_data->disconnecting = 1;
+	smp_wmb();
+
+	usbnet_disconnect(intf);
+}
+
 static void
 ax88179_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
 {
@@ -1906,7 +1930,7 @@ static struct usb_driver ax88179_178a_driver = {
 	.suspend =	ax88179_suspend,
 	.resume =	ax88179_resume,
 	.reset_resume =	ax88179_resume,
-	.disconnect =	usbnet_disconnect,
+	.disconnect =	ax88179_disconnect,
 	.supports_autosuspend = 1,
 	.disable_hub_initiated_lpm = 1,
 };
-- 
2.43.0

Re: [PATCH v4] net: usb: ax88179_178a: avoid failed operations when device is disconnected

[Alan Stern]

On Tue, Dec 05, 2023 at 02:51:54PM +0100, Jose Ignacio Tornos Martinez wrote:
> When the device is disconnected we get the following messages showing
> failed operations:
> Nov 28 20:22:11 localhost kernel: usb 2-3: USB disconnect, device number 2
> Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: unregister 'ax88179_178a' usb-0000:02:00.0-3, ASIX AX88179 USB 3.0 Gigabit Ethernet
> Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to read reg index 0x0002: -19
> Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to write reg index 0x0002: -19
> Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19
> Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0001: -19
> Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19
> 
> The reason is that although the device is detached, normal stop and
> unbind operations are commanded from the driver. These operations are
> not necessary in this situation, so avoid these logs when the device is
> detached if the result of the operation is -ENODEV and if the new flag
> informing about the disconnecting status is enabled.
> 
> cc: stable@vger.kernel.org
> Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
> ---
> V1 -> V2:
> - Follow the suggestions from Alan Stern and Oliver Neukum to check the
> result of the operations (-ENODEV) and not the internal state of the USB 
> layer (USB_STATE_NOTATTACHED).
> V2 -> V3
> - Add cc: stable line in the signed-off-by area.
> V3 -> V4
> - Follow the suggestions from Oliver Neukum to use only one flag when
> disconnecting and include barriers to avoid memory ordering issues.

The __ax88179_read_cmd() and __ax88179_write_cmd() routines are 
asynchronous with respect to ax88179_disconnect(), right?  Or at least, 
they are if they run as a result of the user closing the network 
interface.  Otherwise there wouldn't be any memory ordering issues.

But the memory barriers you added are not the proper solution.  What you 
need here is _synchronization_, not _ordering_.  As it is, the memory 
barriers you have added don't do anything; they shouldn't be in the 
patch.

If you would like a more in-depth explanation, let me know.

Alan Stern

>  drivers/net/usb/ax88179_178a.c | 38 +++++++++++++++++++++++++++-------
>  1 file changed, 31 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
> index 4ea0e155bb0d..1c671f2a43ee 100644
> --- a/drivers/net/usb/ax88179_178a.c
> +++ b/drivers/net/usb/ax88179_178a.c
> @@ -173,6 +173,7 @@ struct ax88179_data {
>  	u8 in_pm;
>  	u32 wol_supported;
>  	u32 wolopts;
> +	u8 disconnecting;
>  };
>  
>  struct ax88179_int_data {
> @@ -208,6 +209,7 @@ static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
>  {
>  	int ret;
>  	int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
> +	struct ax88179_data *ax179_data = dev->driver_priv;
>  
>  	BUG_ON(!dev);
>  
> @@ -219,9 +221,12 @@ static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
>  	ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
>  		 value, index, data, size);
>  
> -	if (unlikely(ret < 0))
> -		netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
> -			    index, ret);
> +	if (unlikely(ret < 0)) {
> +		smp_rmb();
> +		if (!(ret == -ENODEV && ax179_data->disconnecting))
> +			netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
> +				    index, ret);
> +	}
>  
>  	return ret;
>  }
> @@ -231,6 +236,7 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
>  {
>  	int ret;
>  	int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
> +	struct ax88179_data *ax179_data = dev->driver_priv;
>  
>  	BUG_ON(!dev);
>  
> @@ -242,9 +248,12 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
>  	ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
>  		 value, index, data, size);
>  
> -	if (unlikely(ret < 0))
> -		netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n",
> -			    index, ret);
> +	if (unlikely(ret < 0)) {
> +		smp_rmb();
> +		if (!(ret == -ENODEV && ax179_data->disconnecting))
> +			netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n",
> +				    index, ret);
> +	}
>  
>  	return ret;
>  }
> @@ -492,6 +501,21 @@ static int ax88179_resume(struct usb_interface *intf)
>  	return usbnet_resume(intf);
>  }
>  
> +static void ax88179_disconnect(struct usb_interface *intf)
> +{
> +	struct usbnet *dev = usb_get_intfdata(intf);
> +	struct ax88179_data *ax179_data;
> +
> +	if (!dev)
> +		return;
> +
> +	ax179_data = dev->driver_priv;
> +	ax179_data->disconnecting = 1;
> +	smp_wmb();
> +
> +	usbnet_disconnect(intf);
> +}
> +
>  static void
>  ax88179_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
>  {
> @@ -1906,7 +1930,7 @@ static struct usb_driver ax88179_178a_driver = {
>  	.suspend =	ax88179_suspend,
>  	.resume =	ax88179_resume,
>  	.reset_resume =	ax88179_resume,
> -	.disconnect =	usbnet_disconnect,
> +	.disconnect =	ax88179_disconnect,
>  	.supports_autosuspend = 1,
>  	.disable_hub_initiated_lpm = 1,
>  };
> -- 
> 2.43.0
> 

Re: [PATCH v4] net: usb: ax88179_178a: avoid failed operations when device is disconnected

[Jose Ignacio Tornos Martinez]

Hello Alan,

> The __ax88179_read_cmd() and __ax88179_write_cmd() routines are 
> asynchronous with respect to ax88179_disconnect(), right?  Or at least, 
> they are if they run as a result of the user closing the network 
> interface.  Otherwise there wouldn't be any memory ordering issues.
Yes, I think so, they could be asynchronous regarding ax88179_disconnect.

> But the memory barriers you added are not the proper solution.  What you 
> need here is _synchronization_, not _ordering_.  As it is, the memory 
> barriers you have added don't do anything; they shouldn't be in the 
> patch.
Ok, thank you for the helpful clarification, let me check it better,
I understood it in a wrong way.

> If you would like a more in-depth explanation, let me know.
Thank you for your help, I will try first, I really appreciate this.

Best regards
José Ignacio

[PATCH v5] net: usb: ax88179_178a: avoid failed operations when device is disconnected

[Jose Ignacio Tornos Martinez]

When the device is disconnected we get the following messages showing
failed operations:
Nov 28 20:22:11 localhost kernel: usb 2-3: USB disconnect, device number 2
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: unregister 'ax88179_178a' usb-0000:02:00.0-3, ASIX AX88179 USB 3.0 Gigabit Ethernet
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to read reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to write reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0001: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19

The reason is that although the device is detached, normal stop and
unbind operations are commanded from the driver. These operations are
not necessary in this situation, so avoid these logs when the device is
detached if the result of the operation is -ENODEV and if the new flag
informing about the disconnecting status is enabled.

cc: stable@vger.kernel.org
Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
---
V1 -> V2:
- Follow the suggestions from Alan Stern and Oliver Neukum to check the
result of the operations (-ENODEV) and not the internal state of the USB 
layer (USB_STATE_NOTATTACHED).
V2 -> V3
- Add cc: stable line in the signed-off-by area.
V3 -> V4
- Follow the suggestions from Oliver Neukum to use only one flag when
disconnecting and include barriers to avoid memory ordering issues.
V4 -> V5
- Fix my misundestanding and follow the suggestion from Alan Stern to 
syncronize and not order the flag.

 drivers/net/usb/ax88179_178a.c | 47 +++++++++++++++++++++++++++++-----
 1 file changed, 40 insertions(+), 7 deletions(-)

diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index 4ea0e155bb0d..e07614799f75 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -173,6 +173,8 @@ struct ax88179_data {
 	u8 in_pm;
 	u32 wol_supported;
 	u32 wolopts;
+	u8 disconnecting;
+	struct mutex lock;
 };
 
 struct ax88179_int_data {
@@ -208,6 +210,8 @@ static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 {
 	int ret;
 	int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
+	struct ax88179_data *ax179_data = dev->driver_priv;
+	u8 disconnecting;
 
 	BUG_ON(!dev);
 
@@ -219,9 +223,14 @@ static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 	ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 		 value, index, data, size);
 
-	if (unlikely(ret < 0))
-		netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
-			    index, ret);
+	if (unlikely(ret < 0)) {
+		mutex_lock(&ax179_data->lock);
+		disconnecting = ax179_data->disconnecting;
+		mutex_unlock(&ax179_data->lock);
+		if (!(ret == -ENODEV && disconnecting))
+			netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
+				    index, ret);
+	}
 
 	return ret;
 }
@@ -231,6 +240,8 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 {
 	int ret;
 	int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
+	struct ax88179_data *ax179_data = dev->driver_priv;
+	u8 disconnecting;
 
 	BUG_ON(!dev);
 
@@ -242,9 +253,14 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 	ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 		 value, index, data, size);
 
-	if (unlikely(ret < 0))
-		netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n",
-			    index, ret);
+	if (unlikely(ret < 0)) {
+		mutex_lock(&ax179_data->lock);
+		disconnecting = ax179_data->disconnecting;
+		mutex_unlock(&ax179_data->lock);
+		if (!(ret == -ENODEV && disconnecting))
+			netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n",
+				    index, ret);
+	}
 
 	return ret;
 }
@@ -492,6 +508,22 @@ static int ax88179_resume(struct usb_interface *intf)
 	return usbnet_resume(intf);
 }
 
+static void ax88179_disconnect(struct usb_interface *intf)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct ax88179_data *ax179_data;
+
+	if (!dev)
+		return;
+
+	ax179_data = dev->driver_priv;
+	mutex_lock(&ax179_data->lock);
+	ax179_data->disconnecting = 1;
+	mutex_unlock(&ax179_data->lock);
+
+	usbnet_disconnect(intf);
+}
+
 static void
 ax88179_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
 {
@@ -1274,6 +1306,7 @@ static int ax88179_bind(struct usbnet *dev, struct usb_interface *intf)
 	ax179_data = kzalloc(sizeof(*ax179_data), GFP_KERNEL);
 	if (!ax179_data)
 		return -ENOMEM;
+	mutex_init(&ax179_data->lock);
 
 	dev->driver_priv = ax179_data;
 
@@ -1906,7 +1939,7 @@ static struct usb_driver ax88179_178a_driver = {
 	.suspend =	ax88179_suspend,
 	.resume =	ax88179_resume,
 	.reset_resume =	ax88179_resume,
-	.disconnect =	usbnet_disconnect,
+	.disconnect =	ax88179_disconnect,
 	.supports_autosuspend = 1,
 	.disable_hub_initiated_lpm = 1,
 };
-- 
2.43.0

Re: [PATCH v5] net: usb: ax88179_178a: avoid failed operations when device is disconnected

[Alan Stern]

On Thu, Dec 07, 2023 at 12:42:09PM +0100, Jose Ignacio Tornos Martinez wrote:
> When the device is disconnected we get the following messages showing
> failed operations:
> Nov 28 20:22:11 localhost kernel: usb 2-3: USB disconnect, device number 2
> Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: unregister 'ax88179_178a' usb-0000:02:00.0-3, ASIX AX88179 USB 3.0 Gigabit Ethernet
> Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to read reg index 0x0002: -19
> Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to write reg index 0x0002: -19
> Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19
> Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0001: -19
> Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19
> 
> The reason is that although the device is detached, normal stop and
> unbind operations are commanded from the driver. These operations are
> not necessary in this situation, so avoid these logs when the device is
> detached if the result of the operation is -ENODEV and if the new flag
> informing about the disconnecting status is enabled.
> 
> cc: stable@vger.kernel.org
> Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
> ---
> V1 -> V2:
> - Follow the suggestions from Alan Stern and Oliver Neukum to check the
> result of the operations (-ENODEV) and not the internal state of the USB 
> layer (USB_STATE_NOTATTACHED).
> V2 -> V3
> - Add cc: stable line in the signed-off-by area.
> V3 -> V4
> - Follow the suggestions from Oliver Neukum to use only one flag when
> disconnecting and include barriers to avoid memory ordering issues.
> V4 -> V5
> - Fix my misundestanding and follow the suggestion from Alan Stern to 
> syncronize and not order the flag.

I did not suggest that you should synchronize anything.  What I said was 
that the problem you faced was one of synchronization, not of ordering.  

In fact, you should not try to synchronize -- ultimately it is 
impossible to do.  The only way to get true synchronization is to 
prevent the user from disconnecting the device and bringing the 
interface down at the same time, and obviously the kernel cannot do 
this.

>  drivers/net/usb/ax88179_178a.c | 47 +++++++++++++++++++++++++++++-----
>  1 file changed, 40 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
> index 4ea0e155bb0d..e07614799f75 100644
> --- a/drivers/net/usb/ax88179_178a.c
> +++ b/drivers/net/usb/ax88179_178a.c
> @@ -173,6 +173,8 @@ struct ax88179_data {
>  	u8 in_pm;
>  	u32 wol_supported;
>  	u32 wolopts;
> +	u8 disconnecting;
> +	struct mutex lock;
>  };
>  
>  struct ax88179_int_data {
> @@ -208,6 +210,8 @@ static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
>  {
>  	int ret;
>  	int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
> +	struct ax88179_data *ax179_data = dev->driver_priv;
> +	u8 disconnecting;
>  
>  	BUG_ON(!dev);
>  
> @@ -219,9 +223,14 @@ static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
>  	ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
>  		 value, index, data, size);
>  
> -	if (unlikely(ret < 0))
> -		netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
> -			    index, ret);
> +	if (unlikely(ret < 0)) {
> +		mutex_lock(&ax179_data->lock);
> +		disconnecting = ax179_data->disconnecting;
> +		mutex_unlock(&ax179_data->lock);

Clearly you don't understand how mutexes work.  Using a mutex like this 
accomplishes nothing.

> +		if (!(ret == -ENODEV && disconnecting))
> +			netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
> +				    index, ret);
> +	}
>  
>  	return ret;
>  }
> @@ -231,6 +240,8 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
>  {
>  	int ret;
>  	int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
> +	struct ax88179_data *ax179_data = dev->driver_priv;
> +	u8 disconnecting;
>  
>  	BUG_ON(!dev);
>  
> @@ -242,9 +253,14 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
>  	ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
>  		 value, index, data, size);
>  
> -	if (unlikely(ret < 0))
> -		netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n",
> -			    index, ret);
> +	if (unlikely(ret < 0)) {
> +		mutex_lock(&ax179_data->lock);
> +		disconnecting = ax179_data->disconnecting;
> +		mutex_unlock(&ax179_data->lock);

Same here.

> +		if (!(ret == -ENODEV && disconnecting))
> +			netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n",
> +				    index, ret);
> +	}
>  
>  	return ret;
>  }
> @@ -492,6 +508,22 @@ static int ax88179_resume(struct usb_interface *intf)
>  	return usbnet_resume(intf);
>  }
>  
> +static void ax88179_disconnect(struct usb_interface *intf)
> +{
> +	struct usbnet *dev = usb_get_intfdata(intf);
> +	struct ax88179_data *ax179_data;
> +
> +	if (!dev)
> +		return;
> +
> +	ax179_data = dev->driver_priv;
> +	mutex_lock(&ax179_data->lock);
> +	ax179_data->disconnecting = 1;
> +	mutex_unlock(&ax179_data->lock);

And again, this does nothing.

Imagine a situation where the user brings the interface down on CPU 1, 
while at the same time CPU 2 handles a disconnection.  Then the 
following timeline of events can occur:

	CPU 1				CPU 2
	---------------------------	-----------------------------
	The stop operation calls
	__ax88179_read_cmd()

					The device is unplugged

	The routine tries to communicate
	with the device and gets a -ENODEV
	error because the device is gone

					The USB core calls ax88179_disconnect()

	The routine locks the mutex,
	reads ax179_data->disconnecting = 0,
	and unlocks the mutex

					ax88179_disconnect() locks the mutex,
					sets ax179_data->disconnecting = 1,
					and unlocks the mutex

	The routine prints an error message

As you can see, using the mutex does not prevent the problem from 
occurring.  You should not add the mutex at all; it serves no purpose.

Alan Stern

[PATCH v6] net: usb: ax88179_178a: avoid failed operations when device is disconnected

[Jose Ignacio Tornos Martinez]

When the device is disconnected we get the following messages showing
failed operations:
Nov 28 20:22:11 localhost kernel: usb 2-3: USB disconnect, device number 2
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: unregister 'ax88179_178a' usb-0000:02:00.0-3, ASIX AX88179 USB 3.0 Gigabit Ethernet
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to read reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to write reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0001: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19

The reason is that although the device is detached, normal stop and
unbind operations are commanded from the driver. These operations are
not necessary in this situation, so avoid these logs when the device is
detached if the result of the operation is -ENODEV and if the new flag
informing about the disconnecting status is enabled.

cc: stable@vger.kernel.org
Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
---
V1 -> V2:
- Follow the suggestions from Alan Stern and Oliver Neukum to check the
result of the operations (-ENODEV) and not the internal state of the USB 
layer (USB_STATE_NOTATTACHED).
V2 -> V3
- Add cc: stable line in the signed-off-by area.
V3 -> V4
- Follow the suggestions from Oliver Neukum to use only one flag when
disconnecting and include barriers to avoid memory ordering issues.
V4 -> V5
- Fix my misundestanding and follow the suggestion from Alan Stern to 
syncronize and not order the flag.
V5 -> V6
- Remove the unnecessary mutex. Thank you Alan for your teaching and
patience!

 drivers/net/usb/ax88179_178a.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index 4ea0e155bb0d..5a1bf42ce156 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -173,6 +173,7 @@ struct ax88179_data {
 	u8 in_pm;
 	u32 wol_supported;
 	u32 wolopts;
+	u8 disconnecting;
 };
 
 struct ax88179_int_data {
@@ -208,6 +209,7 @@ static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 {
 	int ret;
 	int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
+	struct ax88179_data *ax179_data = dev->driver_priv;
 
 	BUG_ON(!dev);
 
@@ -219,7 +221,7 @@ static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 	ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 		 value, index, data, size);
 
-	if (unlikely(ret < 0))
+	if (unlikely((ret < 0) && !(ret == -ENODEV && ax179_data->disconnecting)))
 		netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
 			    index, ret);
 
@@ -231,6 +233,7 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 {
 	int ret;
 	int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
+	struct ax88179_data *ax179_data = dev->driver_priv;
 
 	BUG_ON(!dev);
 
@@ -242,7 +245,7 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 	ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 		 value, index, data, size);
 
-	if (unlikely(ret < 0))
+	if (unlikely((ret < 0) && !(ret == -ENODEV && ax179_data->disconnecting)))
 		netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n",
 			    index, ret);
 
@@ -492,6 +495,20 @@ static int ax88179_resume(struct usb_interface *intf)
 	return usbnet_resume(intf);
 }
 
+static void ax88179_disconnect(struct usb_interface *intf)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct ax88179_data *ax179_data;
+
+	if (!dev)
+		return;
+
+	ax179_data = dev->driver_priv;
+	ax179_data->disconnecting = 1;
+
+	usbnet_disconnect(intf);
+}
+
 static void
 ax88179_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
 {
@@ -1906,7 +1923,7 @@ static struct usb_driver ax88179_178a_driver = {
 	.suspend =	ax88179_suspend,
 	.resume =	ax88179_resume,
 	.reset_resume =	ax88179_resume,
-	.disconnect =	usbnet_disconnect,
+	.disconnect =	ax88179_disconnect,
 	.supports_autosuspend = 1,
 	.disable_hub_initiated_lpm = 1,
 };
-- 
2.43.0

Re: [PATCH v6] net: usb: ax88179_178a: avoid failed operations when device is disconnected

[Alan Stern]

On Thu, Dec 07, 2023 at 06:50:07PM +0100, Jose Ignacio Tornos Martinez wrote:
> When the device is disconnected we get the following messages showing
> failed operations:
> Nov 28 20:22:11 localhost kernel: usb 2-3: USB disconnect, device number 2
> Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: unregister 'ax88179_178a' usb-0000:02:00.0-3, ASIX AX88179 USB 3.0 Gigabit Ethernet
> Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to read reg index 0x0002: -19
> Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to write reg index 0x0002: -19
> Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19
> Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0001: -19
> Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19
> 
> The reason is that although the device is detached, normal stop and
> unbind operations are commanded from the driver. These operations are
> not necessary in this situation, so avoid these logs when the device is
> detached if the result of the operation is -ENODEV and if the new flag
> informing about the disconnecting status is enabled.
> 
> cc: stable@vger.kernel.org
> Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
> ---
> V1 -> V2:
> - Follow the suggestions from Alan Stern and Oliver Neukum to check the
> result of the operations (-ENODEV) and not the internal state of the USB 
> layer (USB_STATE_NOTATTACHED).
> V2 -> V3
> - Add cc: stable line in the signed-off-by area.
> V3 -> V4
> - Follow the suggestions from Oliver Neukum to use only one flag when
> disconnecting and include barriers to avoid memory ordering issues.
> V4 -> V5
> - Fix my misundestanding and follow the suggestion from Alan Stern to 
> syncronize and not order the flag.
> V5 -> V6
> - Remove the unnecessary mutex. Thank you Alan for your teaching and
> patience!

Acked-by: Alan Stern <stern@rowland.harvard.edu>

Re: [PATCH v6] net: usb: ax88179_178a: avoid failed operations when device is disconnected

[Jakub Kicinski]

On Thu, 7 Dec 2023 15:23:23 -0500 Alan Stern wrote:
> Acked-by: Alan Stern <stern@rowland.harvard.edu>

FWIW I'm expecting Greg to pick this up for usb.

Re: [PATCH v6] net: usb: ax88179_178a: avoid failed operations when device is disconnected

[Greg KH]

On Thu, Dec 07, 2023 at 12:32:56PM -0800, Jakub Kicinski wrote:
> On Thu, 7 Dec 2023 15:23:23 -0500 Alan Stern wrote:
> > Acked-by: Alan Stern <stern@rowland.harvard.edu>
> 
> FWIW I'm expecting Greg to pick this up for usb.

Sure, will do!