[PATCH 6.1 000/194] 6.1.68-rc1 review

[PATCH 6.1 000/194] 6.1.68-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 6.1.68 release.
There are 194 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 13 Dec 2023 18:19:59 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.68-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 6.1.68-rc1

Ville Syrjälä <ville.syrjala@linux.intel.com>
    drm/i915: Skip some timing checks on BXT/GLK DSI transcoders

Jani Nikula <jani.nikula@intel.com>
    drm/i915/sdvo: stop caching has_hdmi_monitor in struct intel_sdvo

Ville Syrjälä <ville.syrjala@linux.intel.com>
    drm/i915/lvds: Use REG_BIT() & co.

Ankit Nautiyal <ankit.k.nautiyal@intel.com>
    drm/i915/display: Drop check for doublescan mode in modevalid

Jia Jie Ho <jiajie.ho@starfivetech.com>
    riscv: Kconfig: Add select ARM_AMBA to SOC_STARFIVE

Florian Westphal <fw@strlen.de>
    netfilter: nft_set_pipapo: skip inactive elements during set walk

Jiaxun Yang <jiaxun.yang@flygoat.com>
    MIPS: Loongson64: Enable DMA noncoherent support

Jiaxun Yang <jiaxun.yang@flygoat.com>
    MIPS: Loongson64: Handle more memory types passed from firmware

Jiaxun Yang <jiaxun.yang@flygoat.com>
    MIPS: Loongson64: Reserve vgabios memory on boot

Sean Christopherson <seanjc@google.com>
    KVM: SVM: Update EFER software model on CR0 trap for SEV-ES

Claudio Imbrenda <imbrenda@linux.ibm.com>
    KVM: s390/mm: Properly reset no-dat

Thomas Bogendoerfer <tsbogend@alpha.franken.de>
    MIPS: kernel: Clear FPU states when setting up kernel threads

David Howells <dhowells@redhat.com>
    cifs: Fix flushing, invalidation and file size with FICLONE

David Howells <dhowells@redhat.com>
    cifs: Fix flushing, invalidation and file size with copy_file_range()

Roy Luo <royluo@google.com>
    USB: gadget: core: adjust uevent timing on gadget unbind

Borislav Petkov (AMD) <bp@alien8.de>
    x86/CPU/AMD: Check vendor in the AMD microcode callback

Mukesh Ojha <quic_mojha@quicinc.com>
    devcoredump: Send uevent once devcd is ready

Ronald Wahl <ronald.wahl@raritan.com>
    serial: 8250_omap: Add earlycon support for the AM654 UART controller

Ronald Wahl <ronald.wahl@raritan.com>
    serial: 8250: 8250_omap: Do not start RX DMA on THRI interrupt

Ronald Wahl <ronald.wahl@raritan.com>
    serial: 8250: 8250_omap: Clear UART_HAS_RHR_IT_DIS bit

Daniel Mack <daniel@zonque.org>
    serial: sc16is7xx: address RX timeout interrupt errata

Arnd Bergmann <arnd@arndb.de>
    ARM: PL011: Fix DMA support

RD Babiera <rdbabiera@google.com>
    usb: typec: class: fix typec_altmode_put_partner to put plugs

Paulo Alcantara <pc@manguebit.com>
    smb: client: fix potential NULL deref in parse_dfs_referrals()

Mathias Nyman <mathias.nyman@linux.intel.com>
    Revert "xhci: Loosen RPM as default policy to cover for AMD xHC 1.1"

David Howells <dhowells@redhat.com>
    cifs: Fix non-availability of dedup breaking generic/304

Cameron Williams <cang1@live.co.uk>
    parport: Add support for Brainboxes IX/UC/PX parallel cards

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    serial: 8250_dw: Add ACPI ID for Granite Rapids-D UART

Konstantin Aladyshev <aladyshev22@gmail.com>
    usb: gadget: f_hid: fix report descriptor allocation

Candice Li <candice.li@amd.com>
    drm/amdgpu: Update EEPROM I2C address for smu v13_0_0

Candice Li <candice.li@amd.com>
    drm/amdgpu: Add I2C EEPROM support on smu v13_0_6

Alex Deucher <alexander.deucher@amd.com>
    drm/amdgpu: simplify amdgpu_ras_eeprom.c

Luben Tuikov <luben.tuikov@amd.com>
    drm/amdgpu: Return from switch early for EEPROM I2C address

Luben Tuikov <luben.tuikov@amd.com>
    drm/amdgpu: Remove second moot switch to set EEPROM I2C address

Luben Tuikov <luben.tuikov@amd.com>
    drm/amdgpu: Add support for RAS table at 0x40000

Luben Tuikov <luben.tuikov@amd.com>
    drm/amdgpu: Decouple RAS EEPROM addresses from chips

Luben Tuikov <luben.tuikov@amd.com>
    drm/amdgpu: Remove redundant I2C EEPROM address

Candice Li <candice.li@amd.com>
    drm/amdgpu: Add EEPROM I2C address support for ip discovery

Candice Li <candice.li@amd.com>
    drm/amdgpu: Update ras eeprom support for smu v13_0_0 and v13_0_10

Prike Liang <Prike.Liang@amd.com>
    drm/amdgpu: correct the amdgpu runtime dereference usage count

Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
    drm/amd/amdgpu: Fix warnings in amdgpu/amdgpu_display.c

Tim Huang <Tim.Huang@amd.com>
    drm/amdgpu: fix memory overflow in the IB test

Boerge Struempfel <boerge.struempfel@gmail.com>
    gpiolib: sysfs: Fix error handling on failed export

Ashwin Dayanand Kamat <ashwin.kamat@broadcom.com>
    x86/sev: Fix kernel crash due to late update to read-only ghcb_version

Peter Zijlstra <peterz@infradead.org>
    perf: Fix perf_event_validate_size()

Hsin-Yi Wang <hsinyi@chromium.org>
    arm64: dts: mt8183: kukui: Fix underscores in node names

Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
    arm64: dts: mediatek: add missing space before {

Helge Deller <deller@gmx.de>
    parisc: Fix asm operand number out of range build error in bug table

Helge Deller <deller@gmx.de>
    parisc: Reduce size of the bug_table on 64-bit kernel by half

Steven Rostedt (Google) <rostedt@goodmis.org>
    tracing: Stop current tracer when resizing buffer

Zheng Yejian <zhengyejian1@huawei.com>
    tracing: Set actual size after ring buffer resize

Steven Rostedt (Google) <rostedt@goodmis.org>
    ring-buffer: Force absolute timestamp on discard of event

Hengqi Chen <hengqi.chen@gmail.com>
    LoongArch: BPF: Don't sign extend function return value

Hengqi Chen <hengqi.chen@gmail.com>
    LoongArch: BPF: Don't sign extend memory load operand

Su Hui <suhui@nfschina.com>
    misc: mei: client.c: fix problem of return '-EOVERFLOW' in mei_cl_write

Su Hui <suhui@nfschina.com>
    misc: mei: client.c: return negative error code in mei_cl_write

Junhao He <hejunhao3@huawei.com>
    hwtracing: hisi_ptt: Add dummy callback pmu::read()

Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    coresight: etm4x: Remove bogous __exit annotation for some functions

Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    coresight: etm4x: Make etm4_remove_dev() return void

Carlos Llamas <cmllamas@google.com>
    binder: fix memory leaks of spam and pending work

AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
    arm64: dts: mediatek: mt8183-evb: Fix unit_address_vs_reg warning on ntc

AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
    arm64: dts: mediatek: mt8183: Move thermal-zones to the root node

AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
    arm64: dts: mediatek: mt8183: Fix unit address for scp reserved memory

AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
    arm64: dts: mediatek: mt8195: Fix PM suspend/resume with venc clocks

AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
    arm64: dts: mediatek: mt8173-evb: Fix regulator-fixed node names

AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
    arm64: dts: mediatek: cherry: Fix interrupt cells for MT6360 on I2C7

Eugen Hristev <eugen.hristev@collabora.com>
    arm64: dts: mediatek: mt8183-kukui-jacuzzi: fix dsi unnecessary cells properties

Eugen Hristev <eugen.hristev@collabora.com>
    arm64: dts: mediatek: mt7622: fix memory node warning check

David Jeffery <djeffery@redhat.com>
    md/raid6: use valid sector values to determine if an I/O should wait on the reshape

Lukasz Luba <lukasz.luba@arm.com>
    powercap: DTPM: Fix missing cpufreq_cpu_put() calls

Hugh Dickins <hughd@google.com>
    mm: fix oops when filemap_map_pmd() without prealloc_pte

Mike Kravetz <mike.kravetz@oracle.com>
    hugetlb: fix null-ptr-deref in hugetlb_vma_lock_write

Francesco Dolcini <francesco.dolcini@toradex.com>
    platform/surface: aggregator: fix recv_buf() return value

Matthias Reichl <hias@horus.com>
    regmap: fix bogus error on regcache_sync success

ChunHao Lin <hau@realtek.com>
    r8169: fix rtl8125b PAUSE frames blasting when suspended

Daniel Borkmann <daniel@iogearbox.net>
    packet: Move reference count in packet_sock to atomic_long_t

Petr Pavlu <petr.pavlu@suse.com>
    tracing: Fix a possible race when disabling buffered events

Petr Pavlu <petr.pavlu@suse.com>
    tracing: Fix incomplete locking when disabling buffered events

Steven Rostedt (Google) <rostedt@goodmis.org>
    tracing: Disable snapshot buffer when stopping instance tracers

Steven Rostedt (Google) <rostedt@goodmis.org>
    tracing: Always update snapshot buffer size

Heiko Carstens <hca@linux.ibm.com>
    checkstack: fix printed address

Tim Van Patten <timvp@google.com>
    cgroup_freezer: cgroup_freezing: Check if not frozen

Ryusuke Konishi <konishi.ryusuke@gmail.com>
    nilfs2: prevent WARNING in nilfs_sufile_set_segment_usage()

Ryusuke Konishi <konishi.ryusuke@gmail.com>
    nilfs2: fix missing error check for sb_set_blocksize call

Steven Rostedt (Google) <rostedt@goodmis.org>
    ring-buffer: Test last update in 32bit version of __rb_time_read()

Mario Limonciello <mario.limonciello@amd.com>
    ALSA: hda/realtek: Add Framework laptop 16 to quirks

Tim Bosse <flinn@timbos.se>
    ALSA: hda/realtek: add new Framework laptop to quirks

Bin Li <bin.li@canonical.com>
    ALSA: hda/realtek: Enable headset on Lenovo M90 Gen5

Jason Zhang <jason.zhang@rock-chips.com>
    ALSA: pcm: fix out-of-bounds in snd_pcm_state_names

Sarah Grant <s@srd.tw>
    ALSA: usb-audio: Add Pioneer DJM-450 mixer controls

Pavel Begunkov <asml.silence@gmail.com>
    io_uring: fix mutex_unlock with unreferenced ctx

Georg Gottleuber <ggo@tuxedocomputers.com>
    nvme-pci: Add sleep quirk for Kingston drives

Pavel Begunkov <asml.silence@gmail.com>
    io_uring/af_unix: disable sending io_uring over sockets

Malcolm Hart <malcolm@5harts.com>
    ASoC: amd: yc: Fix non-functional mic on ASUS E1504FA

JP Kobryn <inwardvessel@gmail.com>
    kprobes: consistent rcu api usage for kretprobe holder

Masami Hiramatsu (Google) <mhiramat@kernel.org>
    rethook: Use __rcu pointer for rethook::handler

Robin Murphy <robin.murphy@arm.com>
    iommu: Avoid more races around device probe

Yu Kuai <yukuai3@huawei.com>
    md: don't leave 'MD_RECOVERY_FROZEN' in error path of md_set_readonly()

Ye Bin <yebin10@huawei.com>
    md: introduce md_ro_state

Clément Léger <cleger@rivosinc.com>
    riscv: fix misaligned access handling of C.SWSP and C.SDSP

Fabio Estevam <festevam@denx.de>
    ARM: dts: imx28-xea: Pass the 'model' property

Philipp Zabel <p.zabel@pengutronix.de>
    ARM: dts: imx7: Declare timers compatible with fsl,imx6dl-gpt

Kunwu Chan <chentao@kylinos.cn>
    ARM: imx: Check return value of devm_kasprintf in imx_mmdc_perf_init

Dinghao Liu <dinghao.liu@zju.edu.cn>
    scsi: be2iscsi: Fix a memleak in beiscsi_init_wrb_handle()

Petr Pavlu <petr.pavlu@suse.com>
    tracing: Fix a warning when allocating buffered events fails

Fabio Estevam <festevam@denx.de>
    ARM: dts: imx6ul-pico: Describe the Ethernet PHY clock

Nathan Rossi <nathan.rossi@digi.com>
    arm64: dts: imx8mp: imx8mq: Add parkmode-disable-ss-quirk on DWC3

Peng Fan <peng.fan@nxp.com>
    arm64: dts: imx8mq: drop usb3-resume-missing-cas from usb

Arnd Bergmann <arnd@arndb.de>
    drm/bridge: tc358768: select CONFIG_VIDEOMODE_HELPERS

Shifeng Li <lishifeng@sangfor.com.cn>
    RDMA/irdma: Avoid free the non-cqp_request scratch

Mike Marciniszyn <mike.marciniszyn@intel.com>
    RDMA/core: Fix umem iterator when PAGE_SIZE is greater then HCA pgsz

Dinghao Liu <dinghao.liu@zju.edu.cn>
    ASoC: wm_adsp: fix memleak in wm_adsp_buffer_populate

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    hwmon: (nzxt-kraken2) Fix error handling path in kraken2_probe()

Neil Armstrong <neil.armstrong@linaro.org>
    ASoC: codecs: lpass-tx-macro: set active_decimator correct default value

Armin Wolf <W_Armin@gmx.de>
    hwmon: (acpi_power_meter) Fix 4.29 MW bug

Shifeng Li <lishifeng1992@126.com>
    RDMA/irdma: Fix UAF in irdma_sc_ccq_get_cqe_info()

Sindhu Devale <sindhu.devale@intel.com>
    RDMA/irdma: Refactor error handling in create CQP

Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
    RDMA/bnxt_re: Correct module description string

Jack Wang <jinpu.wang@ionos.com>
    RDMA/rtrs-clt: Remove the warnings for req in_use check

Jack Wang <jinpu.wang@ionos.com>
    RDMA/rtrs-clt: Fix the max_send_wr setting

Md Haris Iqbal <haris.iqbal@ionos.com>
    RDMA/rtrs-srv: Destroy path files after making sure no IOs in-flight

Md Haris Iqbal <haris.iqbal@ionos.com>
    RDMA/rtrs-srv: Free srv_mr iu only when always_invalidate is true

Md Haris Iqbal <haris.iqbal@ionos.com>
    RDMA/rtrs-srv: Check return values while processing info request

Jack Wang <jinpu.wang@ionos.com>
    RDMA/rtrs-clt: Start hb after path_up

Jack Wang <jinpu.wang@ionos.com>
    RDMA/rtrs-srv: Do not unconditionally enable irq

Shengjiu Wang <shengjiu.wang@nxp.com>
    ASoC: fsl_sai: Fix no frame sync clock issue on i.MX8MP

Alex Bee <knaerzche@gmail.com>
    arm64: dts: rockchip: Expand reg size of vdec node for RK3399

Jonas Karlman <jonas@kwiboo.se>
    arm64: dts: rockchip: Expand reg size of vdec node for RK3328

Mustafa Ismail <mustafa.ismail@intel.com>
    RDMA/irdma: Add wait for suspend on SQD

Mustafa Ismail <mustafa.ismail@intel.com>
    RDMA/irdma: Do not modify to SQD on error

Junxian Huang <huangjunxian6@hisilicon.com>
    RDMA/hns: Fix unnecessary err return when using invalid congest control algorithm

Sumit Garg <sumit.garg@linaro.org>
    tee: optee: Fix supplicant based device enumeration

Dan Carpenter <dan.carpenter@linaro.org>
    mm/damon/sysfs: eliminate potential uninitialized variable warning

Ido Schimmel <idosch@nvidia.com>
    drop_monitor: Require 'CAP_SYS_ADMIN' when joining "events" group

Ido Schimmel <idosch@nvidia.com>
    psample: Require 'CAP_NET_ADMIN' when joining "packets" group

John Fastabend <john.fastabend@gmail.com>
    bpf: sockmap, updating the sg structure should also update curr

Eric Dumazet <edumazet@google.com>
    tcp: do not accept ACK of bytes we never sent

Phil Sutter <phil@nwl.cc>
    netfilter: xt_owner: Fix for unsafe access of sk->sk_socket

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_tables: validate family when identifying table via handle

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_tables: bail out on mismatching dynset and set expressions

Florian Westphal <fw@strlen.de>
    netfilter: nf_tables: fix 'exist' matching on bigendian arches

Jeremy Sowden <jeremy@azazel.net>
    netfilter: nft_exthdr: add boolean DCCP option matching

Konrad Dybcio <konrad.dybcio@linaro.org>
    dt-bindings: interrupt-controller: Allow #power-domain-cells

Rahul Bhansali <rbhansali@marvell.com>
    octeontx2-af: Update Tx link register range

Geetha sowjanya <gakula@marvell.com>
    octeontx2-af: Add missing mcs flr handler call

Geetha sowjanya <gakula@marvell.com>
    octeontx2-af: Fix mcs stats register address

Geetha sowjanya <gakula@marvell.com>
    octeontx2-af: Fix mcs sa cam entries size

Nithin Dabilpuram <ndabilpuram@marvell.com>
    octeontx2-af: Adjust Tx credits when MCS external bypass is disabled

Yonglong Liu <liuyonglong@huawei.com>
    net: hns: fix fake link up on xge port

Yonglong Liu <liuyonglong@huawei.com>
    net: hns: fix wrong head when modify the tx feature when sending packets

Daniil Maximov <daniil31415it@gmail.com>
    net: atlantic: Fix NULL dereference of skb pointer in

Shigeru Yoshida <syoshida@redhat.com>
    ipv4: ip_gre: Avoid skb_pull() failure in ipgre_xmit()

Brett Creeley <brett.creeley@amd.com>
    ionic: Fix dim work handling in split interrupt mode

Shannon Nelson <shannon.nelson@amd.com>
    ionic: fix snprintf format length warning

Paolo Abeni <pabeni@redhat.com>
    tcp: fix mid stream window clamp.

Dinghao Liu <dinghao.liu@zju.edu.cn>
    net: bnxt: fix a potential use-after-free in bnxt_init_tc

Jacob Keller <jacob.e.keller@intel.com>
    iavf: validate tx_coalesce_usecs even if rx_coalesce_usecs is zero

Ivan Vecera <ivecera@redhat.com>
    i40e: Fix unexpected MFS warning message

Zhipeng Lu <alexious@zju.edu.cn>
    octeontx2-af: fix a use-after-free in rvu_npa_register_reporters

Yewon Choi <woni9911@gmail.com>
    xsk: Skip polling event check for unbound socket

Jianheng Zhang <Jianheng.Zhang@synopsys.com>
    net: stmmac: fix FPE events losing

Naveen Mamindlapalli <naveenm@marvell.com>
    octeontx2-pf: consider both Rx and Tx packet stats for adaptive interrupt coalescing

Thomas Reichinger <thomas.reichinger@sohard.de>
    arcnet: restoring support for multiple Sohard Arcnet cards

Kunwu Chan <chentao@kylinos.cn>
    platform/mellanox: Check devm_hwmon_device_register_with_groups() return value

Kunwu Chan <chentao@kylinos.cn>
    platform/mellanox: Add null pointer checks for devm_kasprintf()

David Thompson <davthompson@nvidia.com>
    mlxbf-bootctl: correctly identify secure boot with development keys

Douglas Anderson <dianders@chromium.org>
    r8152: Add RTL8152_INACCESSIBLE to r8153_aldps_en()

Douglas Anderson <dianders@chromium.org>
    r8152: Add RTL8152_INACCESSIBLE to r8153_pre_firmware_1()

Douglas Anderson <dianders@chromium.org>
    r8152: Add RTL8152_INACCESSIBLE to r8156b_wait_loading_flash()

Douglas Anderson <dianders@chromium.org>
    r8152: Add RTL8152_INACCESSIBLE checks to more loops

Douglas Anderson <dianders@chromium.org>
    r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE

Randy Dunlap <rdunlap@infradead.org>
    hv_netvsc: rndis_filter needs to select NLS

Subbaraya Sundeep <sbhatta@marvell.com>
    octeontx2-af: Check return value of nix_get_nixlf before using nixlf

Subbaraya Sundeep <sbhatta@marvell.com>
    octeontx2-pf: Add missing mutex lock in otx2_get_pauseparam

Eric Dumazet <edumazet@google.com>
    ipv6: fix potential NULL deref in fib6_add()

Armin Wolf <W_Armin@gmx.de>
    platform/x86: wmi: Skip blocks with zero instances

Luca Ceresoli <luca.ceresoli@bootlin.com>
    of: dynamic: Fix of_reconfig_get_state_change() return value documentation

Hans de Goede <hdegoede@redhat.com>
    platform/x86: asus-wmi: Move i8042 filter install to shared asus-wmi code

Nícolas F. R. A. Prado <nfraprado@collabora.com>
    dt: dt-extract-compatibles: Don't follow symlinks when walking tree

Nícolas F. R. A. Prado <nfraprado@collabora.com>
    dt: dt-extract-compatibles: Handle cfile arguments in generator function

Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
    x86/tdx: Allow 32-bit emulation by default

Thomas Gleixner <tglx@linutronix.de>
    x86/entry: Do not allow external 0x80 interrupts

Thomas Gleixner <tglx@linutronix.de>
    x86/entry: Convert INT 0x80 emulation to IDTENTRY

Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
    x86/coco: Disable 32-bit emulation by default on TDX and SEV

Nikolay Borisov <nik.borisov@suse.com>
    x86: Introduce ia32_enabled()

YuanShang <YuanShang.Mao@amd.com>
    drm/amdgpu: correct chunk_ptr to a pointer to chunk.

Masahiro Yamada <masahiroy@kernel.org>
    kconfig: fix memory leak from range properties

Alex Pakhunov <alexey.pakhunov@spacex.com>
    tg3: Increment tx_dropped in tg3_tso_bug()

Alex Pakhunov <alexey.pakhunov@spacex.com>
    tg3: Move the [rt]x_dropped counters to tg3_napi

Nick Terrell <terrelln@fb.com>
    zstd: Fix array-index-out-of-bounds UBSAN warning

Jozsef Kadlecsik <kadlec@netfilter.org>
    netfilter: ipset: fix race condition between swap/destroy and kernel side add/del/test

Jan Bottorff <janb@os.amperecomputing.com>
    i2c: designware: Fix corrupted memory seen in the ISR

Thomas Gleixner <tglx@linutronix.de>
    hrtimers: Push pending hrtimers away from outgoing CPU earlier

Steve Sistare <steven.sistare@oracle.com>
    vdpa/mlx5: preserve CVQ vringh index


-------------

Diffstat:

 Documentation/ABI/testing/sysfs-bus-optee-devices  |   9 +
 .../bindings/interrupt-controller/qcom,mpm.yaml    |   4 +
 Makefile                                           |   4 +-
 arch/arm/boot/dts/imx28-xea.dts                    |   1 +
 arch/arm/boot/dts/imx6ul-pico.dtsi                 |   2 +
 arch/arm/boot/dts/imx7s.dtsi                       |   8 +-
 arch/arm/mach-imx/mmdc.c                           |   7 +-
 arch/arm64/boot/dts/freescale/imx8mp.dtsi          |   2 +
 arch/arm64/boot/dts/freescale/imx8mq.dtsi          |   4 +-
 .../boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts  |   2 +-
 arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts       |   2 +-
 arch/arm64/boot/dts/mediatek/mt8173-evb.dts        |   4 +-
 arch/arm64/boot/dts/mediatek/mt8183-evb.dts        |  52 ++---
 .../boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi    |   8 +-
 arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi     |  96 ++++----
 arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts    |  12 +-
 arch/arm64/boot/dts/mediatek/mt8183.dtsi           | 242 ++++++++++-----------
 arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi    |   2 +-
 arch/arm64/boot/dts/mediatek/mt8195.dtsi           |   6 +-
 arch/arm64/boot/dts/rockchip/rk3328.dtsi           |   2 +-
 arch/arm64/boot/dts/rockchip/rk3399.dtsi           |   6 +-
 arch/loongarch/net/bpf_jit.c                       |  12 +-
 arch/mips/Kconfig                                  |   2 +
 arch/mips/include/asm/mach-loongson64/boot_param.h |   9 +-
 arch/mips/kernel/process.c                         |  25 ++-
 arch/mips/loongson64/env.c                         |  10 +-
 arch/mips/loongson64/init.c                        |  47 ++--
 arch/parisc/Kconfig                                |   7 +-
 arch/parisc/include/asm/bug.h                      |  36 +--
 arch/riscv/Kconfig.socs                            |   1 +
 arch/riscv/kernel/traps_misaligned.c               |   6 +-
 arch/s390/mm/pgtable.c                             |   2 +-
 arch/x86/coco/tdx/tdx.c                            |   1 +
 arch/x86/entry/common.c                            |  97 ++++++++-
 arch/x86/entry/entry_64_compat.S                   |  77 -------
 arch/x86/include/asm/ia32.h                        |  23 +-
 arch/x86/include/asm/idtentry.h                    |   4 +
 arch/x86/include/asm/proto.h                       |   4 -
 arch/x86/kernel/cpu/amd.c                          |   3 +
 arch/x86/kernel/idt.c                              |   2 +-
 arch/x86/kernel/sev.c                              |  11 +-
 arch/x86/kvm/svm/svm.c                             |   8 +-
 arch/x86/mm/mem_encrypt_amd.c                      |  11 +
 arch/x86/xen/enlighten_pv.c                        |   2 +-
 arch/x86/xen/xen-asm.S                             |   2 +-
 drivers/acpi/scan.c                                |   7 +-
 drivers/android/binder.c                           |   1 +
 drivers/base/devcoredump.c                         |   3 +
 drivers/base/regmap/regcache.c                     |   3 +-
 drivers/gpio/gpiolib-sysfs.c                       |  15 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c             |   2 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_display.c        |  49 +++--
 drivers/gpu/drm/amd/amdgpu/amdgpu_eeprom.c         |   2 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c     | 121 ++++++-----
 drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c             |   2 +-
 drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c              |   4 +-
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c              |   4 +-
 drivers/gpu/drm/bridge/Kconfig                     |   1 +
 drivers/gpu/drm/i915/display/icl_dsi.c             |   7 +
 drivers/gpu/drm/i915/display/intel_crt.c           |   5 +
 drivers/gpu/drm/i915/display/intel_display.c       |  10 +
 drivers/gpu/drm/i915/display/intel_display.h       |   3 +
 drivers/gpu/drm/i915/display/intel_dp.c            |   5 +-
 drivers/gpu/drm/i915/display/intel_dp_mst.c        |   4 +
 drivers/gpu/drm/i915/display/intel_dvo.c           |   6 +
 drivers/gpu/drm/i915/display/intel_hdmi.c          |   5 +-
 drivers/gpu/drm/i915/display/intel_lvds.c          |   9 +-
 drivers/gpu/drm/i915/display/intel_sdvo.c          |  22 +-
 drivers/gpu/drm/i915/display/intel_tv.c            |   8 +-
 drivers/gpu/drm/i915/display/vlv_dsi.c             |  18 +-
 drivers/gpu/drm/i915/i915_reg.h                    |  46 ++--
 drivers/hwmon/acpi_power_meter.c                   |   4 +
 drivers/hwmon/nzxt-kraken2.c                       |   4 +-
 drivers/hwtracing/coresight/coresight-etm4x-core.c |  12 +-
 drivers/hwtracing/ptt/hisi_ptt.c                   |   5 +
 drivers/i2c/busses/i2c-designware-common.c         |  16 +-
 drivers/infiniband/core/umem.c                     |   6 -
 drivers/infiniband/hw/bnxt_re/main.c               |   2 +-
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c         |  13 +-
 drivers/infiniband/hw/irdma/hw.c                   |  49 +++--
 drivers/infiniband/hw/irdma/main.c                 |   2 +-
 drivers/infiniband/hw/irdma/main.h                 |   2 +-
 drivers/infiniband/hw/irdma/verbs.c                |  28 ++-
 drivers/infiniband/hw/irdma/verbs.h                |   1 +
 drivers/infiniband/ulp/rtrs/rtrs-clt.c             |   7 +-
 drivers/infiniband/ulp/rtrs/rtrs-srv.c             |  37 +++-
 drivers/iommu/iommu.c                              |  19 +-
 drivers/iommu/of_iommu.c                           |  12 +-
 drivers/md/md.c                                    | 174 ++++++++-------
 drivers/md/raid5.c                                 |   4 +-
 drivers/misc/mei/client.c                          |   4 +-
 drivers/net/arcnet/arcdevice.h                     |   2 +
 drivers/net/arcnet/com20020-pci.c                  |  89 ++++----
 drivers/net/ethernet/aquantia/atlantic/aq_ptp.c    |  10 +-
 drivers/net/ethernet/aquantia/atlantic/aq_ptp.h    |   4 +-
 drivers/net/ethernet/aquantia/atlantic/aq_ring.c   |  18 +-
 drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c       |   1 +
 drivers/net/ethernet/broadcom/tg3.c                |  42 +++-
 drivers/net/ethernet/broadcom/tg3.h                |   4 +-
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c  |  29 +++
 drivers/net/ethernet/hisilicon/hns/hns_enet.c      |  53 +++--
 drivers/net/ethernet/hisilicon/hns/hns_enet.h      |   3 +-
 drivers/net/ethernet/intel/i40e/i40e_main.c        |   2 +-
 drivers/net/ethernet/intel/iavf/iavf_ethtool.c     |  12 +-
 drivers/net/ethernet/intel/iavf/iavf_txrx.h        |   1 -
 drivers/net/ethernet/marvell/octeontx2/af/mbox.h   |   2 +-
 drivers/net/ethernet/marvell/octeontx2/af/mcs.c    |  18 +-
 drivers/net/ethernet/marvell/octeontx2/af/mcs.h    |   2 +
 .../net/ethernet/marvell/octeontx2/af/mcs_reg.h    |  31 ++-
 drivers/net/ethernet/marvell/octeontx2/af/rvu.c    |   3 +
 drivers/net/ethernet/marvell/octeontx2/af/rvu.h    |   1 +
 .../ethernet/marvell/octeontx2/af/rvu_devlink.c    |   5 +-
 .../net/ethernet/marvell/octeontx2/af/rvu_nix.c    |   8 +
 .../net/ethernet/marvell/octeontx2/af/rvu_npc.c    |   8 +-
 .../net/ethernet/marvell/octeontx2/af/rvu_reg.c    |   4 +-
 .../net/ethernet/marvell/octeontx2/af/rvu_reg.h    |   1 +
 .../ethernet/marvell/octeontx2/nic/otx2_ethtool.c  |   6 +-
 .../net/ethernet/marvell/octeontx2/nic/otx2_pf.c   |   9 +
 .../net/ethernet/marvell/octeontx2/nic/otx2_txrx.c |  20 +-
 drivers/net/ethernet/pensando/ionic/ionic_dev.h    |   2 +-
 drivers/net/ethernet/pensando/ionic/ionic_lif.c    |  16 +-
 drivers/net/ethernet/realtek/r8169_main.c          |   7 +-
 drivers/net/ethernet/stmicro/stmmac/dwmac5.c       |  45 ++--
 drivers/net/ethernet/stmicro/stmmac/dwmac5.h       |   4 +-
 .../net/ethernet/stmicro/stmmac/dwxgmac2_core.c    |   3 +-
 drivers/net/ethernet/stmicro/stmmac/hwif.h         |   4 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |   8 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c    |   1 +
 drivers/net/hyperv/Kconfig                         |   1 +
 drivers/net/usb/r8152.c                            | 110 ++++++----
 drivers/nvme/host/nvme.h                           |   5 +
 drivers/nvme/host/pci.c                            |  16 +-
 drivers/of/dynamic.c                               |   5 +-
 drivers/parport/parport_pc.c                       |  21 ++
 drivers/platform/mellanox/mlxbf-bootctl.c          |  39 ++--
 drivers/platform/mellanox/mlxbf-pmc.c              |  14 ++
 drivers/platform/surface/aggregator/core.c         |   5 +-
 drivers/platform/x86/Kconfig                       |   2 +-
 drivers/platform/x86/asus-nb-wmi.c                 |  11 -
 drivers/platform/x86/asus-wmi.c                    |   8 +
 drivers/platform/x86/wmi.c                         |   5 +
 drivers/powercap/dtpm_cpu.c                        |  17 +-
 drivers/scsi/be2iscsi/be_main.c                    |   1 +
 drivers/tee/optee/device.c                         |  17 +-
 drivers/tty/serial/8250/8250_dw.c                  |   1 +
 drivers/tty/serial/8250/8250_early.c               |   1 +
 drivers/tty/serial/8250/8250_omap.c                |  14 +-
 drivers/tty/serial/amba-pl011.c                    | 112 +++++-----
 drivers/tty/serial/sc16is7xx.c                     |  12 +
 drivers/usb/gadget/function/f_hid.c                |   7 +-
 drivers/usb/gadget/udc/core.c                      |   4 +-
 drivers/usb/host/xhci-pci.c                        |   2 -
 drivers/usb/typec/class.c                          |   5 +-
 drivers/vdpa/mlx5/net/mlx5_vnet.c                  |   7 +-
 fs/nilfs2/sufile.c                                 |  44 +++-
 fs/nilfs2/the_nilfs.c                              |   6 +-
 fs/smb/client/cifsfs.c                             | 174 +++++++++++++--
 fs/smb/client/smb2ops.c                            |   2 +
 include/linux/cpuhotplug.h                         |   1 +
 include/linux/hrtimer.h                            |   4 +-
 include/linux/hugetlb.h                            |   5 +-
 include/linux/iommu.h                              |   1 +
 include/linux/kprobes.h                            |  13 +-
 include/linux/rethook.h                            |   7 +-
 include/linux/stmmac.h                             |   1 +
 include/net/genetlink.h                            |   2 +
 include/net/tcp.h                                  |   9 +-
 include/rdma/ib_umem.h                             |   9 +-
 include/rdma/ib_verbs.h                            |   1 +
 include/uapi/linux/netfilter/nf_tables.h           |   2 +
 io_uring/io_uring.c                                |   9 +-
 io_uring/rsrc.h                                    |   7 -
 kernel/cgroup/legacy_freezer.c                     |   8 +-
 kernel/cpu.c                                       |   8 +-
 kernel/events/core.c                               |  61 ++++--
 kernel/kprobes.c                                   |   4 +-
 kernel/time/hrtimer.c                              |  33 +--
 kernel/trace/rethook.c                             |  23 +-
 kernel/trace/ring_buffer.c                         |  23 +-
 kernel/trace/trace.c                               | 219 ++++++++-----------
 lib/zstd/common/fse_decompress.c                   |   2 +-
 mm/damon/sysfs.c                                   |   2 +-
 mm/filemap.c                                       |   2 +-
 mm/hugetlb.c                                       |   7 +
 net/core/drop_monitor.c                            |   4 +-
 net/core/filter.c                                  |  19 ++
 net/core/scm.c                                     |   6 +
 net/ipv4/ip_gre.c                                  |  11 +-
 net/ipv4/tcp.c                                     |  22 +-
 net/ipv4/tcp_input.c                               |   6 +-
 net/ipv6/ip6_fib.c                                 |   6 +-
 net/netfilter/ipset/ip_set_core.c                  |  14 +-
 net/netfilter/nf_tables_api.c                      |   5 +-
 net/netfilter/nft_dynset.c                         |  13 +-
 net/netfilter/nft_exthdr.c                         | 108 ++++++++-
 net/netfilter/nft_fib.c                            |   8 +-
 net/netfilter/nft_set_pipapo.c                     |   3 +
 net/netfilter/xt_owner.c                           |  16 +-
 net/netlink/genetlink.c                            |   3 +
 net/packet/af_packet.c                             |  16 +-
 net/packet/internal.h                              |   2 +-
 net/psample/psample.c                              |   3 +-
 net/xdp/xsk.c                                      |   5 +-
 scripts/checkstack.pl                              |   8 +-
 scripts/dtc/dt-extract-compatibles                 |  31 ++-
 scripts/kconfig/symbol.c                           |  14 +-
 sound/core/pcm.c                                   |   1 +
 sound/pci/hda/patch_realtek.c                      |   3 +
 sound/soc/amd/yc/acp6x-mach.c                      |   7 +
 sound/soc/codecs/lpass-tx-macro.c                  |   5 +
 sound/soc/codecs/wm_adsp.c                         |   8 +-
 sound/soc/fsl/fsl_sai.c                            |  21 ++
 sound/usb/mixer_quirks.c                           |  30 +++
 213 files changed, 2316 insertions(+), 1331 deletions(-)

[PATCH 6.1 001/194] vdpa/mlx5: preserve CVQ vringh index

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steve Sistare <steven.sistare@oracle.com>

[ Upstream commit 480b3e73720f6b5d76bef2387b1f9d19ed67573b ]

mlx5_vdpa does not preserve userland's view of vring base for the control
queue in the following sequence:

ioctl VHOST_SET_VRING_BASE
ioctl VHOST_VDPA_SET_STATUS VIRTIO_CONFIG_S_DRIVER_OK
  mlx5_vdpa_set_status()
    setup_cvq_vring()
      vringh_init_iotlb()
        vringh_init_kern()
          vrh->last_avail_idx = 0;
ioctl VHOST_GET_VRING_BASE

To fix, restore the value of cvq->vring.last_avail_idx after calling
vringh_init_iotlb.

Fixes: 5262912ef3cf ("vdpa/mlx5: Add support for control VQ and MAC setting")

Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <1699014387-194368-1-git-send-email-steven.sistare@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vdpa/mlx5/net/mlx5_vnet.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
index bf99654371b35..2b7e796c48897 100644
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
@@ -2508,13 +2508,18 @@ static int setup_cvq_vring(struct mlx5_vdpa_dev *mvdev)
 	struct mlx5_control_vq *cvq = &mvdev->cvq;
 	int err = 0;
 
-	if (mvdev->actual_features & BIT_ULL(VIRTIO_NET_F_CTRL_VQ))
+	if (mvdev->actual_features & BIT_ULL(VIRTIO_NET_F_CTRL_VQ)) {
+		u16 idx = cvq->vring.last_avail_idx;
+
 		err = vringh_init_iotlb(&cvq->vring, mvdev->actual_features,
 					MLX5_CVQ_MAX_ENT, false,
 					(struct vring_desc *)(uintptr_t)cvq->desc_addr,
 					(struct vring_avail *)(uintptr_t)cvq->driver_addr,
 					(struct vring_used *)(uintptr_t)cvq->device_addr);
 
+		if (!err)
+			cvq->vring.last_avail_idx = cvq->vring.last_used_idx = idx;
+	}
 	return err;
 }
 
-- 
2.42.0

[PATCH 6.1 002/194] hrtimers: Push pending hrtimers away from outgoing CPU earlier

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <tglx@linutronix.de>

[ Upstream commit 5c0930ccaad5a74d74e8b18b648c5eb21ed2fe94 ]

2b8272ff4a70 ("cpu/hotplug: Prevent self deadlock on CPU hot-unplug")
solved the straight forward CPU hotplug deadlock vs. the scheduler
bandwidth timer. Yu discovered a more involved variant where a task which
has a bandwidth timer started on the outgoing CPU holds a lock and then
gets throttled. If the lock required by one of the CPU hotplug callbacks
the hotplug operation deadlocks because the unthrottling timer event is not
handled on the dying CPU and can only be recovered once the control CPU
reaches the hotplug state which pulls the pending hrtimers from the dead
CPU.

Solve this by pushing the hrtimers away from the dying CPU in the dying
callbacks. Nothing can queue a hrtimer on the dying CPU at that point because
all other CPUs spin in stop_machine() with interrupts disabled and once the
operation is finished the CPU is marked offline.

Reported-by: Yu Liao <liaoyu15@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Liu Tie <liutie4@huawei.com>
Link: https://lore.kernel.org/r/87a5rphara.ffs@tglx
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/cpuhotplug.h |  1 +
 include/linux/hrtimer.h    |  4 ++--
 kernel/cpu.c               |  8 +++++++-
 kernel/time/hrtimer.c      | 33 ++++++++++++---------------------
 4 files changed, 22 insertions(+), 24 deletions(-)

diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h
index c7e0d80dbf6a5..67575bc8a7e29 100644
--- a/include/linux/cpuhotplug.h
+++ b/include/linux/cpuhotplug.h
@@ -196,6 +196,7 @@ enum cpuhp_state {
 	CPUHP_AP_ARM_CORESIGHT_CTI_STARTING,
 	CPUHP_AP_ARM64_ISNDEP_STARTING,
 	CPUHP_AP_SMPCFD_DYING,
+	CPUHP_AP_HRTIMERS_DYING,
 	CPUHP_AP_X86_TBOOT_DYING,
 	CPUHP_AP_ARM_CACHE_B15_RAC_DYING,
 	CPUHP_AP_ONLINE,
diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index 0ee140176f102..f2044d5a652b5 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -531,9 +531,9 @@ extern void sysrq_timer_list_show(void);
 
 int hrtimers_prepare_cpu(unsigned int cpu);
 #ifdef CONFIG_HOTPLUG_CPU
-int hrtimers_dead_cpu(unsigned int cpu);
+int hrtimers_cpu_dying(unsigned int cpu);
 #else
-#define hrtimers_dead_cpu	NULL
+#define hrtimers_cpu_dying	NULL
 #endif
 
 #endif
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 0e4d362e90825..551468d9c5a85 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -1733,7 +1733,7 @@ static struct cpuhp_step cpuhp_hp_states[] = {
 	[CPUHP_HRTIMERS_PREPARE] = {
 		.name			= "hrtimers:prepare",
 		.startup.single		= hrtimers_prepare_cpu,
-		.teardown.single	= hrtimers_dead_cpu,
+		.teardown.single	= NULL,
 	},
 	[CPUHP_SMPCFD_PREPARE] = {
 		.name			= "smpcfd:prepare",
@@ -1800,6 +1800,12 @@ static struct cpuhp_step cpuhp_hp_states[] = {
 		.startup.single		= NULL,
 		.teardown.single	= smpcfd_dying_cpu,
 	},
+	[CPUHP_AP_HRTIMERS_DYING] = {
+		.name			= "hrtimers:dying",
+		.startup.single		= NULL,
+		.teardown.single	= hrtimers_cpu_dying,
+	},
+
 	/* Entry state on starting. Interrupts enabled from here on. Transient
 	 * state for synchronsization */
 	[CPUHP_AP_ONLINE] = {
diff --git a/kernel/time/hrtimer.c b/kernel/time/hrtimer.c
index e4f0e3b0c4f4f..5561dabc9b225 100644
--- a/kernel/time/hrtimer.c
+++ b/kernel/time/hrtimer.c
@@ -2216,29 +2216,22 @@ static void migrate_hrtimer_list(struct hrtimer_clock_base *old_base,
 	}
 }
 
-int hrtimers_dead_cpu(unsigned int scpu)
+int hrtimers_cpu_dying(unsigned int dying_cpu)
 {
 	struct hrtimer_cpu_base *old_base, *new_base;
-	int i;
+	int i, ncpu = cpumask_first(cpu_active_mask);
 
-	BUG_ON(cpu_online(scpu));
-	tick_cancel_sched_timer(scpu);
+	tick_cancel_sched_timer(dying_cpu);
+
+	old_base = this_cpu_ptr(&hrtimer_bases);
+	new_base = &per_cpu(hrtimer_bases, ncpu);
 
-	/*
-	 * this BH disable ensures that raise_softirq_irqoff() does
-	 * not wakeup ksoftirqd (and acquire the pi-lock) while
-	 * holding the cpu_base lock
-	 */
-	local_bh_disable();
-	local_irq_disable();
-	old_base = &per_cpu(hrtimer_bases, scpu);
-	new_base = this_cpu_ptr(&hrtimer_bases);
 	/*
 	 * The caller is globally serialized and nobody else
 	 * takes two locks at once, deadlock is not possible.
 	 */
-	raw_spin_lock(&new_base->lock);
-	raw_spin_lock_nested(&old_base->lock, SINGLE_DEPTH_NESTING);
+	raw_spin_lock(&old_base->lock);
+	raw_spin_lock_nested(&new_base->lock, SINGLE_DEPTH_NESTING);
 
 	for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
 		migrate_hrtimer_list(&old_base->clock_base[i],
@@ -2249,15 +2242,13 @@ int hrtimers_dead_cpu(unsigned int scpu)
 	 * The migration might have changed the first expiring softirq
 	 * timer on this CPU. Update it.
 	 */
-	hrtimer_update_softirq_timer(new_base, false);
+	__hrtimer_get_next_event(new_base, HRTIMER_ACTIVE_SOFT);
+	/* Tell the other CPU to retrigger the next event */
+	smp_call_function_single(ncpu, retrigger_next_event, NULL, 0);
 
-	raw_spin_unlock(&old_base->lock);
 	raw_spin_unlock(&new_base->lock);
+	raw_spin_unlock(&old_base->lock);
 
-	/* Check, if we got expired work to do */
-	__hrtimer_peek_ahead_timers();
-	local_irq_enable();
-	local_bh_enable();
 	return 0;
 }
 
-- 
2.42.0

[PATCH 6.1 003/194] i2c: designware: Fix corrupted memory seen in the ISR

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Bottorff <janb@os.amperecomputing.com>

[ Upstream commit f726eaa787e9f9bc858c902d18a09af6bcbfcdaf ]

When running on a many core ARM64 server, errors were
happening in the ISR that looked like corrupted memory. These
corruptions would fix themselves if small delays were inserted
in the ISR. Errors reported by the driver included "i2c_designware
APMC0D0F:00: i2c_dw_xfer_msg: invalid target address" and
"i2c_designware APMC0D0F:00:controller timed out" during
in-band IPMI SSIF stress tests.

The problem was determined to be memory writes in the driver were not
becoming visible to all cores when execution rapidly shifted between
cores, like when a register write immediately triggers an ISR.
Processors with weak memory ordering, like ARM64, make no
guarantees about the order normal memory writes become globally
visible, unless barrier instructions are used to control ordering.

To solve this, regmap accessor functions configured by this driver
were changed to use non-relaxed forms of the low-level register
access functions, which include a barrier on platforms that require
it. This assures memory writes before a controller register access are
visible to all cores. The community concluded defaulting to correct
operation outweighed defaulting to the small performance gains from
using relaxed access functions. Being a low speed device added weight to
this choice of default register access behavior.

Signed-off-by: Jan Bottorff <janb@os.amperecomputing.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-designware-common.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index 6fdb25a5f8016..ad98c85ec2e7a 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -63,7 +63,7 @@ static int dw_reg_read(void *context, unsigned int reg, unsigned int *val)
 {
 	struct dw_i2c_dev *dev = context;
 
-	*val = readl_relaxed(dev->base + reg);
+	*val = readl(dev->base + reg);
 
 	return 0;
 }
@@ -72,7 +72,7 @@ static int dw_reg_write(void *context, unsigned int reg, unsigned int val)
 {
 	struct dw_i2c_dev *dev = context;
 
-	writel_relaxed(val, dev->base + reg);
+	writel(val, dev->base + reg);
 
 	return 0;
 }
@@ -81,7 +81,7 @@ static int dw_reg_read_swab(void *context, unsigned int reg, unsigned int *val)
 {
 	struct dw_i2c_dev *dev = context;
 
-	*val = swab32(readl_relaxed(dev->base + reg));
+	*val = swab32(readl(dev->base + reg));
 
 	return 0;
 }
@@ -90,7 +90,7 @@ static int dw_reg_write_swab(void *context, unsigned int reg, unsigned int val)
 {
 	struct dw_i2c_dev *dev = context;
 
-	writel_relaxed(swab32(val), dev->base + reg);
+	writel(swab32(val), dev->base + reg);
 
 	return 0;
 }
@@ -99,8 +99,8 @@ static int dw_reg_read_word(void *context, unsigned int reg, unsigned int *val)
 {
 	struct dw_i2c_dev *dev = context;
 
-	*val = readw_relaxed(dev->base + reg) |
-		(readw_relaxed(dev->base + reg + 2) << 16);
+	*val = readw(dev->base + reg) |
+		(readw(dev->base + reg + 2) << 16);
 
 	return 0;
 }
@@ -109,8 +109,8 @@ static int dw_reg_write_word(void *context, unsigned int reg, unsigned int val)
 {
 	struct dw_i2c_dev *dev = context;
 
-	writew_relaxed(val, dev->base + reg);
-	writew_relaxed(val >> 16, dev->base + reg + 2);
+	writew(val, dev->base + reg);
+	writew(val >> 16, dev->base + reg + 2);
 
 	return 0;
 }
-- 
2.42.0

[PATCH 6.1 004/194] netfilter: ipset: fix race condition between swap/destroy and kernel side add/del/test

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jozsef Kadlecsik <kadlec@netfilter.org>

[ Upstream commit 28628fa952fefc7f2072ce6e8016968cc452b1ba ]

Linkui Xiao reported that there's a race condition when ipset swap and destroy is
called, which can lead to crash in add/del/test element operations. Swap then
destroy are usual operations to replace a set with another one in a production
system. The issue can in some cases be reproduced with the script:

ipset create hash_ip1 hash:net family inet hashsize 1024 maxelem 1048576
ipset add hash_ip1 172.20.0.0/16
ipset add hash_ip1 192.168.0.0/16
iptables -A INPUT -m set --match-set hash_ip1 src -j ACCEPT
while [ 1 ]
do
	# ... Ongoing traffic...
        ipset create hash_ip2 hash:net family inet hashsize 1024 maxelem 1048576
        ipset add hash_ip2 172.20.0.0/16
        ipset swap hash_ip1 hash_ip2
        ipset destroy hash_ip2
        sleep 0.05
done

In the race case the possible order of the operations are

	CPU0			CPU1
	ip_set_test
				ipset swap hash_ip1 hash_ip2
				ipset destroy hash_ip2
	hash_net_kadt

Swap replaces hash_ip1 with hash_ip2 and then destroy removes hash_ip2 which
is the original hash_ip1. ip_set_test was called on hash_ip1 and because destroy
removed it, hash_net_kadt crashes.

The fix is to force ip_set_swap() to wait for all readers to finish accessing the
old set pointers by calling synchronize_rcu().

The first version of the patch was written by Linkui Xiao <xiaolinkui@kylinos.cn>.

v2: synchronize_rcu() is moved into ip_set_swap() in order not to burden
    ip_set_destroy() unnecessarily when all sets are destroyed.
v3: Florian Westphal pointed out that all netfilter hooks run with rcu_read_lock() held
    and em_ipset.c wraps the entire ip_set_test() in rcu read lock/unlock pair.
    So there's no need to extend the rcu read locked area in ipset itself.

Closes: https://lore.kernel.org/all/69e7963b-e7f8-3ad0-210-7b86eebf7f78@netfilter.org/
Reported by: Linkui Xiao <xiaolinkui@kylinos.cn>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/ipset/ip_set_core.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/net/netfilter/ipset/ip_set_core.c b/net/netfilter/ipset/ip_set_core.c
index 20eede37d5228..d47dfdcb899b0 100644
--- a/net/netfilter/ipset/ip_set_core.c
+++ b/net/netfilter/ipset/ip_set_core.c
@@ -61,6 +61,8 @@ MODULE_ALIAS_NFNL_SUBSYS(NFNL_SUBSYS_IPSET);
 	ip_set_dereference((inst)->ip_set_list)[id]
 #define ip_set_ref_netlink(inst,id)	\
 	rcu_dereference_raw((inst)->ip_set_list)[id]
+#define ip_set_dereference_nfnl(p)	\
+	rcu_dereference_check(p, lockdep_nfnl_is_held(NFNL_SUBSYS_IPSET))
 
 /* The set types are implemented in modules and registered set types
  * can be found in ip_set_type_list. Adding/deleting types is
@@ -708,15 +710,10 @@ __ip_set_put_netlink(struct ip_set *set)
 static struct ip_set *
 ip_set_rcu_get(struct net *net, ip_set_id_t index)
 {
-	struct ip_set *set;
 	struct ip_set_net *inst = ip_set_pernet(net);
 
-	rcu_read_lock();
-	/* ip_set_list itself needs to be protected */
-	set = rcu_dereference(inst->ip_set_list)[index];
-	rcu_read_unlock();
-
-	return set;
+	/* ip_set_list and the set pointer need to be protected */
+	return ip_set_dereference_nfnl(inst->ip_set_list)[index];
 }
 
 static inline void
@@ -1399,6 +1396,9 @@ static int ip_set_swap(struct sk_buff *skb, const struct nfnl_info *info,
 	ip_set(inst, to_id) = from;
 	write_unlock_bh(&ip_set_ref_lock);
 
+	/* Make sure all readers of the old set pointers are completed. */
+	synchronize_rcu();
+
 	return 0;
 }
 
-- 
2.42.0

[PATCH 6.1 005/194] zstd: Fix array-index-out-of-bounds UBSAN warning

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nick Terrell <terrelln@fb.com>

[ Upstream commit 77618db346455129424fadbbaec596a09feaf3bb ]

Zstd used an array of length 1 to mean a flexible array for C89
compatibility. Switch to a C99 flexible array to fix the UBSAN warning.

Tested locally by booting the kernel and writing to and reading from a
BtrFS filesystem with zstd compression enabled. I was unable to reproduce
the issue before the fix, however it is a trivial change.

Link: https://lkml.kernel.org/r/20231012213428.1390905-1-nickrterrell@gmail.com
Reported-by: syzbot+1f2eb3e8cd123ffce499@syzkaller.appspotmail.com
Reported-by: Eric Biggers <ebiggers@kernel.org>
Reported-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nick Terrell <terrelln@fb.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/zstd/common/fse_decompress.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/zstd/common/fse_decompress.c b/lib/zstd/common/fse_decompress.c
index 2c8bbe3e4c148..f37b7aec088ec 100644
--- a/lib/zstd/common/fse_decompress.c
+++ b/lib/zstd/common/fse_decompress.c
@@ -312,7 +312,7 @@ size_t FSE_decompress_wksp(void* dst, size_t dstCapacity, const void* cSrc, size
 
 typedef struct {
     short ncount[FSE_MAX_SYMBOL_VALUE + 1];
-    FSE_DTable dtable[1]; /* Dynamically sized */
+    FSE_DTable dtable[]; /* Dynamically sized */
 } FSE_DecompressWksp;
 
 
-- 
2.42.0

[PATCH 6.1 006/194] tg3: Move the [rt]x_dropped counters to tg3_napi

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Pakhunov <alexey.pakhunov@spacex.com>

[ Upstream commit 907d1bdb8b2cc0357d03a1c34d2a08d9943760b1 ]

This change moves [rt]x_dropped counters to tg3_napi so that they can be
updated by a single writer, race-free.

Signed-off-by: Alex Pakhunov <alexey.pakhunov@spacex.com>
Signed-off-by: Vincent Wong <vincent.wong2@spacex.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231113182350.37472-1-alexey.pakhunov@spacex.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/tg3.c | 38 +++++++++++++++++++++++++----
 drivers/net/ethernet/broadcom/tg3.h |  4 +--
 2 files changed, 35 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 85570e40c8e9b..830f542a7c6d2 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -6853,7 +6853,7 @@ static int tg3_rx(struct tg3_napi *tnapi, int budget)
 				       desc_idx, *post_ptr);
 		drop_it_no_recycle:
 			/* Other statistics kept track of by card. */
-			tp->rx_dropped++;
+			tnapi->rx_dropped++;
 			goto next_pkt;
 		}
 
@@ -8151,7 +8151,7 @@ static netdev_tx_t tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
 drop:
 	dev_kfree_skb_any(skb);
 drop_nofree:
-	tp->tx_dropped++;
+	tnapi->tx_dropped++;
 	return NETDEV_TX_OK;
 }
 
@@ -9330,7 +9330,7 @@ static void __tg3_set_rx_mode(struct net_device *);
 /* tp->lock is held. */
 static int tg3_halt(struct tg3 *tp, int kind, bool silent)
 {
-	int err;
+	int err, i;
 
 	tg3_stop_fw(tp);
 
@@ -9351,6 +9351,13 @@ static int tg3_halt(struct tg3 *tp, int kind, bool silent)
 
 		/* And make sure the next sample is new data */
 		memset(tp->hw_stats, 0, sizeof(struct tg3_hw_stats));
+
+		for (i = 0; i < TG3_IRQ_MAX_VECS; ++i) {
+			struct tg3_napi *tnapi = &tp->napi[i];
+
+			tnapi->rx_dropped = 0;
+			tnapi->tx_dropped = 0;
+		}
 	}
 
 	return err;
@@ -11900,6 +11907,9 @@ static void tg3_get_nstats(struct tg3 *tp, struct rtnl_link_stats64 *stats)
 {
 	struct rtnl_link_stats64 *old_stats = &tp->net_stats_prev;
 	struct tg3_hw_stats *hw_stats = tp->hw_stats;
+	unsigned long rx_dropped;
+	unsigned long tx_dropped;
+	int i;
 
 	stats->rx_packets = old_stats->rx_packets +
 		get_stat64(&hw_stats->rx_ucast_packets) +
@@ -11946,8 +11956,26 @@ static void tg3_get_nstats(struct tg3 *tp, struct rtnl_link_stats64 *stats)
 	stats->rx_missed_errors = old_stats->rx_missed_errors +
 		get_stat64(&hw_stats->rx_discards);
 
-	stats->rx_dropped = tp->rx_dropped;
-	stats->tx_dropped = tp->tx_dropped;
+	/* Aggregate per-queue counters. The per-queue counters are updated
+	 * by a single writer, race-free. The result computed by this loop
+	 * might not be 100% accurate (counters can be updated in the middle of
+	 * the loop) but the next tg3_get_nstats() will recompute the current
+	 * value so it is acceptable.
+	 *
+	 * Note that these counters wrap around at 4G on 32bit machines.
+	 */
+	rx_dropped = (unsigned long)(old_stats->rx_dropped);
+	tx_dropped = (unsigned long)(old_stats->tx_dropped);
+
+	for (i = 0; i < tp->irq_cnt; i++) {
+		struct tg3_napi *tnapi = &tp->napi[i];
+
+		rx_dropped += tnapi->rx_dropped;
+		tx_dropped += tnapi->tx_dropped;
+	}
+
+	stats->rx_dropped = rx_dropped;
+	stats->tx_dropped = tx_dropped;
 }
 
 static int tg3_get_regs_len(struct net_device *dev)
diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h
index 1000c894064f0..8d753f8c5b065 100644
--- a/drivers/net/ethernet/broadcom/tg3.h
+++ b/drivers/net/ethernet/broadcom/tg3.h
@@ -3018,6 +3018,7 @@ struct tg3_napi {
 	u16				*rx_rcb_prod_idx;
 	struct tg3_rx_prodring_set	prodring;
 	struct tg3_rx_buffer_desc	*rx_rcb;
+	unsigned long			rx_dropped;
 
 	u32				tx_prod	____cacheline_aligned;
 	u32				tx_cons;
@@ -3026,6 +3027,7 @@ struct tg3_napi {
 	u32				prodmbox;
 	struct tg3_tx_buffer_desc	*tx_ring;
 	struct tg3_tx_ring_info		*tx_buffers;
+	unsigned long			tx_dropped;
 
 	dma_addr_t			status_mapping;
 	dma_addr_t			rx_rcb_mapping;
@@ -3219,8 +3221,6 @@ struct tg3 {
 
 
 	/* begin "everything else" cacheline(s) section */
-	unsigned long			rx_dropped;
-	unsigned long			tx_dropped;
 	struct rtnl_link_stats64	net_stats_prev;
 	struct tg3_ethtool_stats	estats_prev;
 
-- 
2.42.0

[PATCH 6.1 007/194] tg3: Increment tx_dropped in tg3_tso_bug()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Pakhunov <alexey.pakhunov@spacex.com>

[ Upstream commit 17dd5efe5f36a96bd78012594fabe21efb01186b ]

tg3_tso_bug() drops a packet if it cannot be segmented for any reason.
The number of discarded frames should be incremented accordingly.

Signed-off-by: Alex Pakhunov <alexey.pakhunov@spacex.com>
Signed-off-by: Vincent Wong <vincent.wong2@spacex.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20231113182350.37472-2-alexey.pakhunov@spacex.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/tg3.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 830f542a7c6d2..f60a16de565ed 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -7879,8 +7879,10 @@ static int tg3_tso_bug(struct tg3 *tp, struct tg3_napi *tnapi,
 
 	segs = skb_gso_segment(skb, tp->dev->features &
 				    ~(NETIF_F_TSO | NETIF_F_TSO6));
-	if (IS_ERR(segs) || !segs)
+	if (IS_ERR(segs) || !segs) {
+		tnapi->tx_dropped++;
 		goto tg3_tso_bug_end;
+	}
 
 	skb_list_walk_safe(segs, seg, next) {
 		skb_mark_not_on_list(seg);
-- 
2.42.0

[PATCH 6.1 008/194] kconfig: fix memory leak from range properties

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit ae1eff0349f2e908fc083630e8441ea6dc434dc0 ]

Currently, sym_validate_range() duplicates the range string using
xstrdup(), which is overwritten by a subsequent sym_calc_value() call.
It results in a memory leak.

Instead, only the pointer should be copied.

Below is a test case, with a summary from Valgrind.

[Test Kconfig]

  config FOO
          int "foo"
          range 10 20

[Test .config]

  CONFIG_FOO=0

[Before]

  LEAK SUMMARY:
     definitely lost: 3 bytes in 1 blocks
     indirectly lost: 0 bytes in 0 blocks
       possibly lost: 0 bytes in 0 blocks
     still reachable: 17,465 bytes in 21 blocks
          suppressed: 0 bytes in 0 blocks

[After]

  LEAK SUMMARY:
     definitely lost: 0 bytes in 0 blocks
     indirectly lost: 0 bytes in 0 blocks
       possibly lost: 0 bytes in 0 blocks
     still reachable: 17,462 bytes in 20 blocks
          suppressed: 0 bytes in 0 blocks

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/kconfig/symbol.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/scripts/kconfig/symbol.c b/scripts/kconfig/symbol.c
index 0572330bf8a78..a76925b46ce63 100644
--- a/scripts/kconfig/symbol.c
+++ b/scripts/kconfig/symbol.c
@@ -122,9 +122,9 @@ static long long sym_get_range_val(struct symbol *sym, int base)
 static void sym_validate_range(struct symbol *sym)
 {
 	struct property *prop;
+	struct symbol *range_sym;
 	int base;
 	long long val, val2;
-	char str[64];
 
 	switch (sym->type) {
 	case S_INT:
@@ -140,17 +140,15 @@ static void sym_validate_range(struct symbol *sym)
 	if (!prop)
 		return;
 	val = strtoll(sym->curr.val, NULL, base);
-	val2 = sym_get_range_val(prop->expr->left.sym, base);
+	range_sym = prop->expr->left.sym;
+	val2 = sym_get_range_val(range_sym, base);
 	if (val >= val2) {
-		val2 = sym_get_range_val(prop->expr->right.sym, base);
+		range_sym = prop->expr->right.sym;
+		val2 = sym_get_range_val(range_sym, base);
 		if (val <= val2)
 			return;
 	}
-	if (sym->type == S_INT)
-		sprintf(str, "%lld", val2);
-	else
-		sprintf(str, "0x%llx", val2);
-	sym->curr.val = xstrdup(str);
+	sym->curr.val = range_sym->curr.val;
 }
 
 static void sym_set_changed(struct symbol *sym)
-- 
2.42.0

[PATCH 6.1 009/194] drm/amdgpu: correct chunk_ptr to a pointer to chunk.

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: YuanShang <YuanShang.Mao@amd.com>

[ Upstream commit 50d51374b498457c4dea26779d32ccfed12ddaff ]

The variable "chunk_ptr" should be a pointer pointing
to a struct drm_amdgpu_cs_chunk instead of to a pointer
of that.

Signed-off-by: YuanShang <YuanShang.Mao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c
index ced4e7e8f98b5..133e4e03c143c 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c
@@ -201,7 +201,7 @@ static int amdgpu_cs_pass1(struct amdgpu_cs_parser *p,
 	}
 
 	for (i = 0; i < p->nchunks; i++) {
-		struct drm_amdgpu_cs_chunk __user **chunk_ptr = NULL;
+		struct drm_amdgpu_cs_chunk __user *chunk_ptr = NULL;
 		struct drm_amdgpu_cs_chunk user_chunk;
 		uint32_t __user *cdata;
 
-- 
2.42.0

[PATCH 6.1 010/194] x86: Introduce ia32_enabled()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nikolay Borisov <nik.borisov@suse.com>

[ upstream commit 1da5c9bc119d3a749b519596b93f9b2667e93c4a ]

IA32 support on 64bit kernels depends on whether CONFIG_IA32_EMULATION
is selected or not. As it is a compile time option it doesn't
provide the flexibility to have distributions set their own policy for
IA32 support and give the user the flexibility to override it.

As a first step introduce ia32_enabled() which abstracts whether IA32
compat is turned on or off. Upcoming patches will implement
the ability to set IA32 compat state at boot time.

Signed-off-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230623111409.3047467-2-nik.borisov@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/entry/common.c     |    4 ++++
 arch/x86/include/asm/ia32.h |   16 +++++++++++++++-
 2 files changed, 19 insertions(+), 1 deletion(-)

--- a/arch/x86/entry/common.c
+++ b/arch/x86/entry/common.c
@@ -96,6 +96,10 @@ static __always_inline int syscall_32_en
 	return (int)regs->orig_ax;
 }
 
+#ifdef CONFIG_IA32_EMULATION
+bool __ia32_enabled __ro_after_init = true;
+#endif
+
 /*
  * Invoke a 32-bit syscall.  Called with IRQs on in CONTEXT_KERNEL.
  */
--- a/arch/x86/include/asm/ia32.h
+++ b/arch/x86/include/asm/ia32.h
@@ -68,6 +68,20 @@ extern void ia32_pick_mmap_layout(struct
 
 #endif
 
-#endif /* CONFIG_IA32_EMULATION */
+extern bool __ia32_enabled;
+
+static inline bool ia32_enabled(void)
+{
+	return __ia32_enabled;
+}
+
+#else /* !CONFIG_IA32_EMULATION */
+
+static inline bool ia32_enabled(void)
+{
+	return IS_ENABLED(CONFIG_X86_32);
+}
+
+#endif
 
 #endif /* _ASM_X86_IA32_H */

[PATCH 6.1 011/194] x86/coco: Disable 32-bit emulation by default on TDX and SEV

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>

[ upstream commit b82a8dbd3d2f4563156f7150c6f2ecab6e960b30 ]

The INT 0x80 instruction is used for 32-bit x86 Linux syscalls. The
kernel expects to receive a software interrupt as a result of the INT
0x80 instruction. However, an external interrupt on the same vector
triggers the same handler.

The kernel interprets an external interrupt on vector 0x80 as a 32-bit
system call that came from userspace.

A VMM can inject external interrupts on any arbitrary vector at any
time.  This remains true even for TDX and SEV guests where the VMM is
untrusted.

Put together, this allows an untrusted VMM to trigger int80 syscall
handling at any given point. The content of the guest register file at
that moment defines what syscall is triggered and its arguments. It
opens the guest OS to manipulation from the VMM side.

Disable 32-bit emulation by default for TDX and SEV. User can override
it with the ia32_emulation=y command line option.

[ dhansen: reword the changelog ]

Reported-by: Supraja Sridhara <supraja.sridhara@inf.ethz.ch>
Reported-by: Benedict Schlüter <benedict.schlueter@inf.ethz.ch>
Reported-by: Mark Kuhne <mark.kuhne@inf.ethz.ch>
Reported-by: Andrin Bertschi <andrin.bertschi@inf.ethz.ch>
Reported-by: Shweta Shinde <shweta.shinde@inf.ethz.ch>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@vger.kernel.org> # 6.0+: 1da5c9b x86: Introduce ia32_enabled()
Cc: <stable@vger.kernel.org> # 6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/coco/tdx/tdx.c       |   10 ++++++++++
 arch/x86/include/asm/ia32.h   |    7 +++++++
 arch/x86/mm/mem_encrypt_amd.c |   11 +++++++++++
 3 files changed, 28 insertions(+)

--- a/arch/x86/coco/tdx/tdx.c
+++ b/arch/x86/coco/tdx/tdx.c
@@ -8,6 +8,7 @@
 #include <asm/coco.h>
 #include <asm/tdx.h>
 #include <asm/vmx.h>
+#include <asm/ia32.h>
 #include <asm/insn.h>
 #include <asm/insn-eval.h>
 #include <asm/pgtable.h>
@@ -829,5 +830,14 @@ void __init tdx_early_init(void)
 	x86_platform.guest.enc_cache_flush_required  = tdx_cache_flush_required;
 	x86_platform.guest.enc_tlb_flush_required    = tdx_tlb_flush_required;
 
+	/*
+	 * The VMM is capable of injecting interrupt 0x80 and triggering the
+	 * compatibility syscall path.
+	 *
+	 * By default, the 32-bit emulation is disabled in order to ensure
+	 * the safety of the VM.
+	 */
+	ia32_disable();
+
 	pr_info("Guest detected\n");
 }
--- a/arch/x86/include/asm/ia32.h
+++ b/arch/x86/include/asm/ia32.h
@@ -75,6 +75,11 @@ static inline bool ia32_enabled(void)
 	return __ia32_enabled;
 }
 
+static inline void ia32_disable(void)
+{
+	__ia32_enabled = false;
+}
+
 #else /* !CONFIG_IA32_EMULATION */
 
 static inline bool ia32_enabled(void)
@@ -82,6 +87,8 @@ static inline bool ia32_enabled(void)
 	return IS_ENABLED(CONFIG_X86_32);
 }
 
+static inline void ia32_disable(void) {}
+
 #endif
 
 #endif /* _ASM_X86_IA32_H */
--- a/arch/x86/mm/mem_encrypt_amd.c
+++ b/arch/x86/mm/mem_encrypt_amd.c
@@ -34,6 +34,7 @@
 #include <asm/msr.h>
 #include <asm/cmdline.h>
 #include <asm/sev.h>
+#include <asm/ia32.h>
 
 #include "mm_internal.h"
 
@@ -502,6 +503,16 @@ void __init sme_early_init(void)
 	x86_platform.guest.enc_status_change_finish  = amd_enc_status_change_finish;
 	x86_platform.guest.enc_tlb_flush_required    = amd_enc_tlb_flush_required;
 	x86_platform.guest.enc_cache_flush_required  = amd_enc_cache_flush_required;
+
+	/*
+	 * The VMM is capable of injecting interrupt 0x80 and triggering the
+	 * compatibility syscall path.
+	 *
+	 * By default, the 32-bit emulation is disabled in order to ensure
+	 * the safety of the VM.
+	 */
+	if (sev_status & MSR_AMD64_SEV_ENABLED)
+		ia32_disable();
 }
 
 void __init mem_encrypt_free_decrypted_mem(void)

[PATCH 6.1 012/194] x86/entry: Convert INT 0x80 emulation to IDTENTRY

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <tglx@linutronix.de>

[ upstream commit be5341eb0d43b1e754799498bd2e8756cc167a41 ]

There is no real reason to have a separate ASM entry point implementation
for the legacy INT 0x80 syscall emulation on 64-bit.

IDTENTRY provides all the functionality needed with the only difference
that it does not:

  - save the syscall number (AX) into pt_regs::orig_ax
  - set pt_regs::ax to -ENOSYS

Both can be done safely in the C code of an IDTENTRY before invoking any of
the syscall related functions which depend on this convention.

Aside of ASM code reduction this prepares for detecting and handling a
local APIC injected vector 0x80.

[ kirill.shutemov: More verbose comments ]
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/entry/common.c          |   58 ++++++++++++++++++++++++++++-
 arch/x86/entry/entry_64_compat.S |   77 ---------------------------------------
 arch/x86/include/asm/idtentry.h  |    4 ++
 arch/x86/include/asm/proto.h     |    4 --
 arch/x86/kernel/idt.c            |    2 -
 arch/x86/xen/enlighten_pv.c      |    2 -
 arch/x86/xen/xen-asm.S           |    2 -
 7 files changed, 64 insertions(+), 85 deletions(-)

--- a/arch/x86/entry/common.c
+++ b/arch/x86/entry/common.c
@@ -119,7 +119,62 @@ static __always_inline void do_syscall_3
 	}
 }
 
-/* Handles int $0x80 */
+#ifdef CONFIG_IA32_EMULATION
+/**
+ * int80_emulation - 32-bit legacy syscall entry
+ *
+ * This entry point can be used by 32-bit and 64-bit programs to perform
+ * 32-bit system calls.  Instances of INT $0x80 can be found inline in
+ * various programs and libraries.  It is also used by the vDSO's
+ * __kernel_vsyscall fallback for hardware that doesn't support a faster
+ * entry method.  Restarted 32-bit system calls also fall back to INT
+ * $0x80 regardless of what instruction was originally used to do the
+ * system call.
+ *
+ * This is considered a slow path.  It is not used by most libc
+ * implementations on modern hardware except during process startup.
+ *
+ * The arguments for the INT $0x80 based syscall are on stack in the
+ * pt_regs structure:
+ *   eax:				system call number
+ *   ebx, ecx, edx, esi, edi, ebp:	arg1 - arg 6
+ */
+DEFINE_IDTENTRY_RAW(int80_emulation)
+{
+	int nr;
+
+	/* Establish kernel context. */
+	enter_from_user_mode(regs);
+
+	instrumentation_begin();
+	add_random_kstack_offset();
+
+	/*
+	 * The low level idtentry code pushed -1 into regs::orig_ax
+	 * and regs::ax contains the syscall number.
+	 *
+	 * User tracing code (ptrace or signal handlers) might assume
+	 * that the regs::orig_ax contains a 32-bit number on invoking
+	 * a 32-bit syscall.
+	 *
+	 * Establish the syscall convention by saving the 32bit truncated
+	 * syscall number in regs::orig_ax and by invalidating regs::ax.
+	 */
+	regs->orig_ax = regs->ax & GENMASK(31, 0);
+	regs->ax = -ENOSYS;
+
+	nr = syscall_32_enter(regs);
+
+	local_irq_enable();
+	nr = syscall_enter_from_user_mode_work(regs, nr);
+	do_syscall_32_irqs_on(regs, nr);
+
+	instrumentation_end();
+	syscall_exit_to_user_mode(regs);
+}
+#else /* CONFIG_IA32_EMULATION */
+
+/* Handles int $0x80 on a 32bit kernel */
 __visible noinstr void do_int80_syscall_32(struct pt_regs *regs)
 {
 	int nr = syscall_32_enter(regs);
@@ -138,6 +193,7 @@ __visible noinstr void do_int80_syscall_
 	instrumentation_end();
 	syscall_exit_to_user_mode(regs);
 }
+#endif /* !CONFIG_IA32_EMULATION */
 
 static noinstr bool __do_fast_syscall_32(struct pt_regs *regs)
 {
--- a/arch/x86/entry/entry_64_compat.S
+++ b/arch/x86/entry/entry_64_compat.S
@@ -277,80 +277,3 @@ SYM_INNER_LABEL(entry_SYSRETL_compat_end
 	ANNOTATE_NOENDBR
 	int3
 SYM_CODE_END(entry_SYSCALL_compat)
-
-/*
- * 32-bit legacy system call entry.
- *
- * 32-bit x86 Linux system calls traditionally used the INT $0x80
- * instruction.  INT $0x80 lands here.
- *
- * This entry point can be used by 32-bit and 64-bit programs to perform
- * 32-bit system calls.  Instances of INT $0x80 can be found inline in
- * various programs and libraries.  It is also used by the vDSO's
- * __kernel_vsyscall fallback for hardware that doesn't support a faster
- * entry method.  Restarted 32-bit system calls also fall back to INT
- * $0x80 regardless of what instruction was originally used to do the
- * system call.
- *
- * This is considered a slow path.  It is not used by most libc
- * implementations on modern hardware except during process startup.
- *
- * Arguments:
- * eax  system call number
- * ebx  arg1
- * ecx  arg2
- * edx  arg3
- * esi  arg4
- * edi  arg5
- * ebp  arg6
- */
-SYM_CODE_START(entry_INT80_compat)
-	UNWIND_HINT_ENTRY
-	ENDBR
-	/*
-	 * Interrupts are off on entry.
-	 */
-	ASM_CLAC			/* Do this early to minimize exposure */
-	ALTERNATIVE "swapgs", "", X86_FEATURE_XENPV
-
-	/*
-	 * User tracing code (ptrace or signal handlers) might assume that
-	 * the saved RAX contains a 32-bit number when we're invoking a 32-bit
-	 * syscall.  Just in case the high bits are nonzero, zero-extend
-	 * the syscall number.  (This could almost certainly be deleted
-	 * with no ill effects.)
-	 */
-	movl	%eax, %eax
-
-	/* switch to thread stack expects orig_ax and rdi to be pushed */
-	pushq	%rax			/* pt_regs->orig_ax */
-
-	/* Need to switch before accessing the thread stack. */
-	SWITCH_TO_KERNEL_CR3 scratch_reg=%rax
-
-	/* In the Xen PV case we already run on the thread stack. */
-	ALTERNATIVE "", "jmp .Lint80_keep_stack", X86_FEATURE_XENPV
-
-	movq	%rsp, %rax
-	movq	PER_CPU_VAR(cpu_current_top_of_stack), %rsp
-
-	pushq	5*8(%rax)		/* regs->ss */
-	pushq	4*8(%rax)		/* regs->rsp */
-	pushq	3*8(%rax)		/* regs->eflags */
-	pushq	2*8(%rax)		/* regs->cs */
-	pushq	1*8(%rax)		/* regs->ip */
-	pushq	0*8(%rax)		/* regs->orig_ax */
-.Lint80_keep_stack:
-
-	PUSH_AND_CLEAR_REGS rax=$-ENOSYS
-	UNWIND_HINT_REGS
-
-	cld
-
-	IBRS_ENTER
-	UNTRAIN_RET
-
-	movq	%rsp, %rdi
-	call	do_int80_syscall_32
-	jmp	swapgs_restore_regs_and_return_to_usermode
-SYM_CODE_END(entry_INT80_compat)
--- a/arch/x86/include/asm/idtentry.h
+++ b/arch/x86/include/asm/idtentry.h
@@ -569,6 +569,10 @@ DECLARE_IDTENTRY_RAW(X86_TRAP_UD,		exc_i
 DECLARE_IDTENTRY_RAW(X86_TRAP_BP,		exc_int3);
 DECLARE_IDTENTRY_RAW_ERRORCODE(X86_TRAP_PF,	exc_page_fault);
 
+#if defined(CONFIG_IA32_EMULATION)
+DECLARE_IDTENTRY_RAW(IA32_SYSCALL_VECTOR,	int80_emulation);
+#endif
+
 #ifdef CONFIG_X86_MCE
 #ifdef CONFIG_X86_64
 DECLARE_IDTENTRY_MCE(X86_TRAP_MC,	exc_machine_check);
--- a/arch/x86/include/asm/proto.h
+++ b/arch/x86/include/asm/proto.h
@@ -32,10 +32,6 @@ void entry_SYSCALL_compat(void);
 void entry_SYSCALL_compat_safe_stack(void);
 void entry_SYSRETL_compat_unsafe_stack(void);
 void entry_SYSRETL_compat_end(void);
-void entry_INT80_compat(void);
-#ifdef CONFIG_XEN_PV
-void xen_entry_INT80_compat(void);
-#endif
 #endif
 
 void x86_configure_nx(void);
--- a/arch/x86/kernel/idt.c
+++ b/arch/x86/kernel/idt.c
@@ -117,7 +117,7 @@ static const __initconst struct idt_data
 
 	SYSG(X86_TRAP_OF,		asm_exc_overflow),
 #if defined(CONFIG_IA32_EMULATION)
-	SYSG(IA32_SYSCALL_VECTOR,	entry_INT80_compat),
+	SYSG(IA32_SYSCALL_VECTOR,	asm_int80_emulation),
 #elif defined(CONFIG_X86_32)
 	SYSG(IA32_SYSCALL_VECTOR,	entry_INT80_32),
 #endif
--- a/arch/x86/xen/enlighten_pv.c
+++ b/arch/x86/xen/enlighten_pv.c
@@ -623,7 +623,7 @@ static struct trap_array_entry trap_arra
 	TRAP_ENTRY(exc_int3,				false ),
 	TRAP_ENTRY(exc_overflow,			false ),
 #ifdef CONFIG_IA32_EMULATION
-	{ entry_INT80_compat,          xen_entry_INT80_compat,          false },
+	TRAP_ENTRY(int80_emulation,			false ),
 #endif
 	TRAP_ENTRY(exc_page_fault,			false ),
 	TRAP_ENTRY(exc_divide_error,			false ),
--- a/arch/x86/xen/xen-asm.S
+++ b/arch/x86/xen/xen-asm.S
@@ -156,7 +156,7 @@ xen_pv_trap asm_xenpv_exc_machine_check
 #endif /* CONFIG_X86_MCE */
 xen_pv_trap asm_exc_simd_coprocessor_error
 #ifdef CONFIG_IA32_EMULATION
-xen_pv_trap entry_INT80_compat
+xen_pv_trap asm_int80_emulation
 #endif
 xen_pv_trap asm_exc_xen_unknown_trap
 xen_pv_trap asm_exc_xen_hypervisor_callback

[PATCH 6.1 013/194] x86/entry: Do not allow external 0x80 interrupts

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <tglx@linutronix.de>

[ upstream commit 55617fb991df535f953589586468612351575704 ]

The INT 0x80 instruction is used for 32-bit x86 Linux syscalls. The
kernel expects to receive a software interrupt as a result of the INT
0x80 instruction. However, an external interrupt on the same vector
also triggers the same codepath.

An external interrupt on vector 0x80 will currently be interpreted as a
32-bit system call, and assuming that it was a user context.

Panic on external interrupts on the vector.

To distinguish software interrupts from external ones, the kernel checks
the APIC ISR bit relevant to the 0x80 vector. For software interrupts,
this bit will be 0.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/entry/common.c |   37 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 36 insertions(+), 1 deletion(-)

--- a/arch/x86/entry/common.c
+++ b/arch/x86/entry/common.c
@@ -25,6 +25,7 @@
 #include <xen/events.h>
 #endif
 
+#include <asm/apic.h>
 #include <asm/desc.h>
 #include <asm/traps.h>
 #include <asm/vdso.h>
@@ -120,6 +121,25 @@ static __always_inline void do_syscall_3
 }
 
 #ifdef CONFIG_IA32_EMULATION
+static __always_inline bool int80_is_external(void)
+{
+	const unsigned int offs = (0x80 / 32) * 0x10;
+	const u32 bit = BIT(0x80 % 32);
+
+	/* The local APIC on XENPV guests is fake */
+	if (cpu_feature_enabled(X86_FEATURE_XENPV))
+		return false;
+
+	/*
+	 * If vector 0x80 is set in the APIC ISR then this is an external
+	 * interrupt. Either from broken hardware or injected by a VMM.
+	 *
+	 * Note: In guest mode this is only valid for secure guests where
+	 * the secure module fully controls the vAPIC exposed to the guest.
+	 */
+	return apic_read(APIC_ISR + offs) & bit;
+}
+
 /**
  * int80_emulation - 32-bit legacy syscall entry
  *
@@ -143,12 +163,27 @@ DEFINE_IDTENTRY_RAW(int80_emulation)
 {
 	int nr;
 
-	/* Establish kernel context. */
+	/* Kernel does not use INT $0x80! */
+	if (unlikely(!user_mode(regs))) {
+		irqentry_enter(regs);
+		instrumentation_begin();
+		panic("Unexpected external interrupt 0x80\n");
+	}
+
+	/*
+	 * Establish kernel context for instrumentation, including for
+	 * int80_is_external() below which calls into the APIC driver.
+	 * Identical for soft and external interrupts.
+	 */
 	enter_from_user_mode(regs);
 
 	instrumentation_begin();
 	add_random_kstack_offset();
 
+	/* Validate that this is a soft interrupt to the extent possible */
+	if (unlikely(int80_is_external()))
+		panic("Unexpected external interrupt 0x80\n");
+
 	/*
 	 * The low level idtentry code pushed -1 into regs::orig_ax
 	 * and regs::ax contains the syscall number.

[PATCH 6.1 014/194] x86/tdx: Allow 32-bit emulation by default

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>

[ upstream commit f4116bfc44621882556bbf70f5284fbf429a5cf6 ]

32-bit emulation was disabled on TDX to prevent a possible attack by
a VMM injecting an interrupt on vector 0x80.

Now that int80_emulation() has a check for external interrupts the
limitation can be lifted.

To distinguish software interrupts from external ones, int80_emulation()
checks the APIC ISR bit relevant to the 0x80 vector. For
software interrupts, this bit will be 0.

On TDX, the VAPIC state (including ISR) is protected and cannot be
manipulated by the VMM. The ISR bit is set by the microcode flow during
the handling of posted interrupts.

[ dhansen: more changelog tweaks ]

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/coco/tdx/tdx.c |    9 ---------
 1 file changed, 9 deletions(-)

--- a/arch/x86/coco/tdx/tdx.c
+++ b/arch/x86/coco/tdx/tdx.c
@@ -830,14 +830,5 @@ void __init tdx_early_init(void)
 	x86_platform.guest.enc_cache_flush_required  = tdx_cache_flush_required;
 	x86_platform.guest.enc_tlb_flush_required    = tdx_tlb_flush_required;
 
-	/*
-	 * The VMM is capable of injecting interrupt 0x80 and triggering the
-	 * compatibility syscall path.
-	 *
-	 * By default, the 32-bit emulation is disabled in order to ensure
-	 * the safety of the VM.
-	 */
-	ia32_disable();
-
 	pr_info("Guest detected\n");
 }

[PATCH 6.1 015/194] dt: dt-extract-compatibles: Handle cfile arguments in generator function

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nícolas F. R. A. Prado <nfraprado@collabora.com>

[ Upstream commit eb2139fc0da63b89a2ad565ecd8133a37e8b7c4f ]

Move the handling of the cfile arguments to a separate generator
function to avoid redundancy.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20230828211424.2964562-2-nfraprado@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
Stable-dep-of: 8f51593cdcab ("dt: dt-extract-compatibles: Don't follow symlinks when walking tree")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/dtc/dt-extract-compatibles | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/scripts/dtc/dt-extract-compatibles b/scripts/dtc/dt-extract-compatibles
index a1119762ed086..05c47e3d8c00e 100755
--- a/scripts/dtc/dt-extract-compatibles
+++ b/scripts/dtc/dt-extract-compatibles
@@ -49,6 +49,14 @@ def print_compat(filename, compatibles):
 	else:
 		print(*compatibles, sep='\n')
 
+def files_to_parse(path_args):
+	for f in path_args:
+		if os.path.isdir(f):
+			for filename in glob.iglob(f + "/**/*.c", recursive=True):
+				yield filename
+		else:
+			yield f
+
 show_filename = False
 
 if __name__ == "__main__":
@@ -59,11 +67,6 @@ if __name__ == "__main__":
 
 	show_filename = args.with_filename
 
-	for f in args.cfile:
-		if os.path.isdir(f):
-			for filename in glob.iglob(f + "/**/*.c", recursive=True):
-				compat_list = parse_compatibles(filename)
-				print_compat(filename, compat_list)
-		else:
-			compat_list = parse_compatibles(f)
-			print_compat(f, compat_list)
+	for f in files_to_parse(args.cfile):
+		compat_list = parse_compatibles(f)
+		print_compat(f, compat_list)
-- 
2.42.0

[PATCH 6.1 016/194] dt: dt-extract-compatibles: Dont follow symlinks when walking tree

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nícolas F. R. A. Prado <nfraprado@collabora.com>

[ Upstream commit 8f51593cdcab82fb23ef2e1a0010b2e6f99aae02 ]

The iglob function, which we use to find C source files in the kernel
tree, always follows symbolic links. This can cause unintentional
recursions whenever a symbolic link points to a parent directory. A
common scenario is building the kernel with the output set to a
directory inside the kernel tree, which will contain such a symlink.

Instead of using the iglob function, use os.walk to traverse the
directory tree, which by default doesn't follow symbolic links. fnmatch
is then used to match the glob on the filename, as well as ignore hidden
files (which were ignored by default with iglob).

This approach runs just as fast as using iglob.

Fixes: b6acf8073517 ("dt: Add a check for undocumented compatible strings in kernel")
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Closes: https://lore.kernel.org/all/e90cb52f-d55b-d3ba-3933-6cc7b43fcfbc@arm.com
Signed-off-by: "Nícolas F. R. A. Prado" <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20231107225624.9811-1-nfraprado@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/dtc/dt-extract-compatibles | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/scripts/dtc/dt-extract-compatibles b/scripts/dtc/dt-extract-compatibles
index 05c47e3d8c00e..9686a1cf85498 100755
--- a/scripts/dtc/dt-extract-compatibles
+++ b/scripts/dtc/dt-extract-compatibles
@@ -1,8 +1,8 @@
 #!/usr/bin/env python3
 # SPDX-License-Identifier: GPL-2.0-only
 
+import fnmatch
 import os
-import glob
 import re
 import argparse
 
@@ -49,10 +49,20 @@ def print_compat(filename, compatibles):
 	else:
 		print(*compatibles, sep='\n')
 
+def glob_without_symlinks(root, glob):
+	for path, dirs, files in os.walk(root):
+		# Ignore hidden directories
+		for d in dirs:
+			if fnmatch.fnmatch(d, ".*"):
+				dirs.remove(d)
+		for f in files:
+			if fnmatch.fnmatch(f, glob):
+				yield os.path.join(path, f)
+
 def files_to_parse(path_args):
 	for f in path_args:
 		if os.path.isdir(f):
-			for filename in glob.iglob(f + "/**/*.c", recursive=True):
+			for filename in glob_without_symlinks(f, "*.c"):
 				yield filename
 		else:
 			yield f
-- 
2.42.0

[PATCH 6.1 017/194] platform/x86: asus-wmi: Move i8042 filter install to shared asus-wmi code

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit b52cbca22cbf6c9d2700c1e576d0ddcc670e49d5 ]

asus-nb-wmi calls i8042_install_filter() in some cases, but it never
calls i8042_remove_filter(). This means that a dangling pointer to
the filter function is left after rmmod leading to crashes.

Fix this by moving the i8042-filter installation to the shared
asus-wmi code and also remove it from the shared code on driver unbind.

Fixes: b5643539b825 ("platform/x86: asus-wmi: Filter buggy scan codes on ASUS Q500A")
Cc: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231120154235.610808-2-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/Kconfig       |  2 +-
 drivers/platform/x86/asus-nb-wmi.c | 11 -----------
 drivers/platform/x86/asus-wmi.c    |  8 ++++++++
 3 files changed, 9 insertions(+), 12 deletions(-)

diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 1396a839dd8a4..d5acef3202dad 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -271,6 +271,7 @@ config ASUS_WMI
 	depends on RFKILL || RFKILL = n
 	depends on HOTPLUG_PCI
 	depends on ACPI_VIDEO || ACPI_VIDEO = n
+	depends on SERIO_I8042 || SERIO_I8042 = n
 	select INPUT_SPARSEKMAP
 	select LEDS_CLASS
 	select NEW_LEDS
@@ -287,7 +288,6 @@ config ASUS_WMI
 config ASUS_NB_WMI
 	tristate "Asus Notebook WMI Driver"
 	depends on ASUS_WMI
-	depends on SERIO_I8042 || SERIO_I8042 = n
 	help
 	  This is a driver for newer Asus notebooks. It adds extra features
 	  like wireless radio and bluetooth control, leds, hotkeys, backlight...
diff --git a/drivers/platform/x86/asus-nb-wmi.c b/drivers/platform/x86/asus-nb-wmi.c
index df1db54d4e183..af3da303e2b15 100644
--- a/drivers/platform/x86/asus-nb-wmi.c
+++ b/drivers/platform/x86/asus-nb-wmi.c
@@ -501,8 +501,6 @@ static const struct dmi_system_id asus_quirks[] = {
 
 static void asus_nb_wmi_quirks(struct asus_wmi_driver *driver)
 {
-	int ret;
-
 	quirks = &quirk_asus_unknown;
 	dmi_check_system(asus_quirks);
 
@@ -517,15 +515,6 @@ static void asus_nb_wmi_quirks(struct asus_wmi_driver *driver)
 
 	if (tablet_mode_sw != -1)
 		quirks->tablet_switch_mode = tablet_mode_sw;
-
-	if (quirks->i8042_filter) {
-		ret = i8042_install_filter(quirks->i8042_filter);
-		if (ret) {
-			pr_warn("Unable to install key filter\n");
-			return;
-		}
-		pr_info("Using i8042 filter function for receiving events\n");
-	}
 }
 
 static const struct key_entry asus_nb_wmi_keymap[] = {
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index 49dd55b8e8faf..296150eaef929 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -3839,6 +3839,12 @@ static int asus_wmi_add(struct platform_device *pdev)
 		goto fail_wmi_handler;
 	}
 
+	if (asus->driver->quirks->i8042_filter) {
+		err = i8042_install_filter(asus->driver->quirks->i8042_filter);
+		if (err)
+			pr_warn("Unable to install key filter - %d\n", err);
+	}
+
 	asus_wmi_battery_init(asus);
 
 	asus_wmi_debugfs_init(asus);
@@ -3873,6 +3879,8 @@ static int asus_wmi_remove(struct platform_device *device)
 	struct asus_wmi *asus;
 
 	asus = platform_get_drvdata(device);
+	if (asus->driver->quirks->i8042_filter)
+		i8042_remove_filter(asus->driver->quirks->i8042_filter);
 	wmi_remove_notify_handler(asus->driver->event_guid);
 	asus_wmi_backlight_exit(asus);
 	asus_wmi_input_exit(asus);
-- 
2.42.0

[PATCH 6.1 018/194] of: dynamic: Fix of_reconfig_get_state_change() return value documentation

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luca Ceresoli <luca.ceresoli@bootlin.com>

[ Upstream commit d79972789d17499b6091ded2fc0c6763c501a5ba ]

The documented numeric return values do not match the actual returned
values. Fix them by using the enum names instead of raw numbers.

Fixes: b53a2340d0d3 ("of/reconfig: Add of_reconfig_get_state_change() of notifier helper.")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20231123-fix-of_reconfig_get_state_change-docs-v1-1-f51892050ff9@bootlin.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/of/dynamic.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/of/dynamic.c b/drivers/of/dynamic.c
index 0fbf331a748fd..9bb9fe0fad07c 100644
--- a/drivers/of/dynamic.c
+++ b/drivers/of/dynamic.c
@@ -104,8 +104,9 @@ int of_reconfig_notify(unsigned long action, struct of_reconfig_data *p)
  *
  * Returns the new state of a device based on the notifier used.
  *
- * Return: 0 on device going from enabled to disabled, 1 on device
- * going from disabled to enabled and -1 on no change.
+ * Return: OF_RECONFIG_CHANGE_REMOVE on device going from enabled to
+ * disabled, OF_RECONFIG_CHANGE_ADD on device going from disabled to
+ * enabled and OF_RECONFIG_NO_CHANGE on no change.
  */
 int of_reconfig_get_state_change(unsigned long action, struct of_reconfig_data *pr)
 {
-- 
2.42.0

[PATCH 6.1 019/194] platform/x86: wmi: Skip blocks with zero instances

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Armin Wolf <W_Armin@gmx.de>

[ Upstream commit cbf54f37600e874d82886aa3b2f471778cae01ce ]

Some machines like the HP Omen 17 ck2000nf contain WMI blocks
with zero instances, so any WMI driver which tries to handle the
associated WMI device will fail.
Skip such WMI blocks to avoid confusing any WMI drivers.

Reported-by: Alexis Belmonte <alexbelm48@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218188
Fixes: bff431e49ff5 ("ACPI: WMI: Add ACPI-WMI mapping driver")
Tested-by: Alexis Belmonte <alexbelm48@gmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231129181654.5800-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/wmi.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c
index 2b79377cc21e2..b3f3e23a64eee 100644
--- a/drivers/platform/x86/wmi.c
+++ b/drivers/platform/x86/wmi.c
@@ -1227,6 +1227,11 @@ static int parse_wdg(struct device *wmi_bus_dev, struct acpi_device *device)
 		if (debug_dump_wdg)
 			wmi_dump_wdg(&gblock[i]);
 
+		if (!gblock[i].instance_count) {
+			dev_info(wmi_bus_dev, FW_INFO "%pUL has zero instances\n", &gblock[i].guid);
+			continue;
+		}
+
 		if (guid_already_parsed_for_legacy(device, &gblock[i].guid))
 			continue;
 
-- 
2.42.0

[PATCH 6.1 020/194] ipv6: fix potential NULL deref in fib6_add()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 75475bb51e78a3f54ad2f69380f2a1c985e85f2d ]

If fib6_find_prefix() returns NULL, we should silently fallback
using fib6_null_entry regardless of RT6_DEBUG value.

syzbot reported:

WARNING: CPU: 0 PID: 5477 at net/ipv6/ip6_fib.c:1516 fib6_add+0x310d/0x3fa0 net/ipv6/ip6_fib.c:1516
Modules linked in:
CPU: 0 PID: 5477 Comm: syz-executor.0 Not tainted 6.7.0-rc2-syzkaller-00029-g9b6de136b5f0 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
RIP: 0010:fib6_add+0x310d/0x3fa0 net/ipv6/ip6_fib.c:1516
Code: 00 48 8b 54 24 68 e8 42 22 00 00 48 85 c0 74 14 49 89 c6 e8 d5 d3 c2 f7 eb 5d e8 ce d3 c2 f7 e9 ca 00 00 00 e8 c4 d3 c2 f7 90 <0f> 0b 90 48 b8 00 00 00 00 00 fc ff df 48 8b 4c 24 38 80 3c 01 00
RSP: 0018:ffffc90005067740 EFLAGS: 00010293
RAX: ffffffff89cba5bc RBX: ffffc90005067ab0 RCX: ffff88801a2e9dc0
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: ffffc90005067980 R08: ffffffff89cbca85 R09: 1ffff110040d4b85
R10: dffffc0000000000 R11: ffffed10040d4b86 R12: 00000000ffffffff
R13: 1ffff110051c3904 R14: ffff8880206a5c00 R15: ffff888028e1c820
FS: 00007f763783c6c0(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f763783bff8 CR3: 000000007f74d000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__ip6_ins_rt net/ipv6/route.c:1303 [inline]
ip6_route_add+0x88/0x120 net/ipv6/route.c:3847
ipv6_route_ioctl+0x525/0x7b0 net/ipv6/route.c:4467
inet6_ioctl+0x21a/0x270 net/ipv6/af_inet6.c:575
sock_do_ioctl+0x152/0x460 net/socket.c:1220
sock_ioctl+0x615/0x8c0 net/socket.c:1339
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:871 [inline]
__se_sys_ioctl+0xf8/0x170 fs/ioctl.c:857
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x45/0x110 arch/x86/entry/common.c:82

Fixes: 7bbfe00e0252 ("ipv6: fix general protection fault in fib6_add()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231129160630.3509216-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/ip6_fib.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c
index eb6640f9a7921..1840735e9cb07 100644
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -1502,13 +1502,9 @@ int fib6_add(struct fib6_node *root, struct fib6_info *rt,
 			if (!pn_leaf && !(pn->fn_flags & RTN_RTINFO)) {
 				pn_leaf = fib6_find_prefix(info->nl_net, table,
 							   pn);
-#if RT6_DEBUG >= 2
-				if (!pn_leaf) {
-					WARN_ON(!pn_leaf);
+				if (!pn_leaf)
 					pn_leaf =
 					    info->nl_net->ipv6.fib6_null_entry;
-				}
-#endif
 				fib6_info_hold(pn_leaf);
 				rcu_assign_pointer(pn->leaf, pn_leaf);
 			}
-- 
2.42.0

[PATCH 6.1 021/194] octeontx2-pf: Add missing mutex lock in otx2_get_pauseparam

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Subbaraya Sundeep <sbhatta@marvell.com>

[ Upstream commit 9572c949385aa2ef10368287c439bcb7935137c8 ]

All the mailbox messages sent to AF needs to be guarded
by mutex lock. Add the missing lock in otx2_get_pauseparam
function.

Fixes: 75f36270990c ("octeontx2-pf: Support to enable/disable pause frames via ethtool")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
index aaf1af2a402ec..af779ae40d3c2 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
@@ -323,9 +323,12 @@ static void otx2_get_pauseparam(struct net_device *netdev,
 	if (is_otx2_lbkvf(pfvf->pdev))
 		return;
 
+	mutex_lock(&pfvf->mbox.lock);
 	req = otx2_mbox_alloc_msg_cgx_cfg_pause_frm(&pfvf->mbox);
-	if (!req)
+	if (!req) {
+		mutex_unlock(&pfvf->mbox.lock);
 		return;
+	}
 
 	if (!otx2_sync_mbox_msg(&pfvf->mbox)) {
 		rsp = (struct cgx_pause_frm_cfg *)
@@ -333,6 +336,7 @@ static void otx2_get_pauseparam(struct net_device *netdev,
 		pause->rx_pause = rsp->rx_pause;
 		pause->tx_pause = rsp->tx_pause;
 	}
+	mutex_unlock(&pfvf->mbox.lock);
 }
 
 static int otx2_set_pauseparam(struct net_device *netdev,
-- 
2.42.0

[PATCH 6.1 022/194] octeontx2-af: Check return value of nix_get_nixlf before using nixlf

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Subbaraya Sundeep <sbhatta@marvell.com>

[ Upstream commit 830139e7b6911266a84a77e1f18abf758995cc89 ]

If a NIXLF is not attached to a PF/VF device then
nix_get_nixlf function fails and returns proper error
code. But npc_get_default_entry_action does not check it
and uses garbage value in subsequent calls. Fix this
by cheking the return value of nix_get_nixlf.

Fixes: 967db3529eca ("octeontx2-af: add support for multicast/promisc packet replication feature")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
index 16cfc802e348d..f65805860c8d4 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
@@ -389,7 +389,13 @@ static u64 npc_get_default_entry_action(struct rvu *rvu, struct npc_mcam *mcam,
 	int bank, nixlf, index;
 
 	/* get ucast entry rule entry index */
-	nix_get_nixlf(rvu, pf_func, &nixlf, NULL);
+	if (nix_get_nixlf(rvu, pf_func, &nixlf, NULL)) {
+		dev_err(rvu->dev, "%s: nixlf not attached to pcifunc:0x%x\n",
+			__func__, pf_func);
+		/* Action 0 is drop */
+		return 0;
+	}
+
 	index = npc_get_nixlf_mcam_index(mcam, pf_func, nixlf,
 					 NIXLF_UCAST_ENTRY);
 	bank = npc_get_bank(mcam, index);
-- 
2.42.0

[PATCH 6.1 023/194] hv_netvsc: rndis_filter needs to select NLS

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 6c89f49964375c904cea33c0247467873f4daf2c ]

rndis_filter uses utf8s_to_utf16s() which is provided by setting
NLS, so select NLS to fix the build error:

ERROR: modpost: "utf8s_to_utf16s" [drivers/net/hyperv/hv_netvsc.ko] undefined!

Fixes: 1ce09e899d28 ("hyperv: Add support for setting MAC from within guests")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20231130055853.19069-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/hyperv/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/hyperv/Kconfig b/drivers/net/hyperv/Kconfig
index ca7bf7f897d36..c8cbd85adcf99 100644
--- a/drivers/net/hyperv/Kconfig
+++ b/drivers/net/hyperv/Kconfig
@@ -3,5 +3,6 @@ config HYPERV_NET
 	tristate "Microsoft Hyper-V virtual network driver"
 	depends on HYPERV
 	select UCS2_STRING
+	select NLS
 	help
 	  Select this option to enable the Hyper-V virtual network driver.
-- 
2.42.0

[PATCH 6.1 024/194] r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit 715f67f33af45ce2cc3a5b1ef133cc8c8e7787b0 ]

Whenever the RTL8152_UNPLUG is set that just tells the driver that all
accesses will fail and we should just immediately bail. A future patch
will use this same concept at a time when the driver hasn't actually
been unplugged but is about to be reset. Rename the flag in
preparation for the future patch.

This is a no-op change and just a search and replace.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 32a574c7e268 ("r8152: Add RTL8152_INACCESSIBLE checks to more loops")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/r8152.c | 96 ++++++++++++++++++++---------------------
 1 file changed, 48 insertions(+), 48 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 345e341d22338..76792269222ea 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -763,7 +763,7 @@ enum rtl_register_content {
 
 /* rtl8152 flags */
 enum rtl8152_flags {
-	RTL8152_UNPLUG = 0,
+	RTL8152_INACCESSIBLE = 0,
 	RTL8152_SET_RX_MODE,
 	WORK_ENABLE,
 	RTL8152_LINK_CHG,
@@ -1244,7 +1244,7 @@ int set_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data)
 static void rtl_set_unplug(struct r8152 *tp)
 {
 	if (tp->udev->state == USB_STATE_NOTATTACHED) {
-		set_bit(RTL8152_UNPLUG, &tp->flags);
+		set_bit(RTL8152_INACCESSIBLE, &tp->flags);
 		smp_mb__after_atomic();
 	}
 }
@@ -1255,7 +1255,7 @@ static int generic_ocp_read(struct r8152 *tp, u16 index, u16 size,
 	u16 limit = 64;
 	int ret = 0;
 
-	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 		return -ENODEV;
 
 	/* both size and indix must be 4 bytes align */
@@ -1299,7 +1299,7 @@ static int generic_ocp_write(struct r8152 *tp, u16 index, u16 byteen,
 	u16 byteen_start, byteen_end, byen;
 	u16 limit = 512;
 
-	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 		return -ENODEV;
 
 	/* both size and indix must be 4 bytes align */
@@ -1529,7 +1529,7 @@ static int read_mii_word(struct net_device *netdev, int phy_id, int reg)
 	struct r8152 *tp = netdev_priv(netdev);
 	int ret;
 
-	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 		return -ENODEV;
 
 	if (phy_id != R8152_PHY_ID)
@@ -1545,7 +1545,7 @@ void write_mii_word(struct net_device *netdev, int phy_id, int reg, int val)
 {
 	struct r8152 *tp = netdev_priv(netdev);
 
-	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 		return;
 
 	if (phy_id != R8152_PHY_ID)
@@ -1750,7 +1750,7 @@ static void read_bulk_callback(struct urb *urb)
 	if (!tp)
 		return;
 
-	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 		return;
 
 	if (!test_bit(WORK_ENABLE, &tp->flags))
@@ -1842,7 +1842,7 @@ static void write_bulk_callback(struct urb *urb)
 	if (!test_bit(WORK_ENABLE, &tp->flags))
 		return;
 
-	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 		return;
 
 	if (!skb_queue_empty(&tp->tx_queue))
@@ -1863,7 +1863,7 @@ static void intr_callback(struct urb *urb)
 	if (!test_bit(WORK_ENABLE, &tp->flags))
 		return;
 
-	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 		return;
 
 	switch (status) {
@@ -2607,7 +2607,7 @@ static void bottom_half(struct tasklet_struct *t)
 {
 	struct r8152 *tp = from_tasklet(tp, t, tx_tl);
 
-	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 		return;
 
 	if (!test_bit(WORK_ENABLE, &tp->flags))
@@ -2650,7 +2650,7 @@ int r8152_submit_rx(struct r8152 *tp, struct rx_agg *agg, gfp_t mem_flags)
 	int ret;
 
 	/* The rx would be stopped, so skip submitting */
-	if (test_bit(RTL8152_UNPLUG, &tp->flags) ||
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags) ||
 	    !test_bit(WORK_ENABLE, &tp->flags) || !netif_carrier_ok(tp->netdev))
 		return 0;
 
@@ -3050,7 +3050,7 @@ static int rtl_enable(struct r8152 *tp)
 
 static int rtl8152_enable(struct r8152 *tp)
 {
-	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 		return -ENODEV;
 
 	set_tx_qlen(tp);
@@ -3137,7 +3137,7 @@ static int rtl8153_enable(struct r8152 *tp)
 {
 	u32 ocp_data;
 
-	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 		return -ENODEV;
 
 	set_tx_qlen(tp);
@@ -3169,7 +3169,7 @@ static void rtl_disable(struct r8152 *tp)
 	u32 ocp_data;
 	int i;
 
-	if (test_bit(RTL8152_UNPLUG, &tp->flags)) {
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) {
 		rtl_drop_queued_tx(tp);
 		return;
 	}
@@ -3623,7 +3623,7 @@ static u16 r8153_phy_status(struct r8152 *tp, u16 desired)
 		}
 
 		msleep(20);
-		if (test_bit(RTL8152_UNPLUG, &tp->flags))
+		if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 			break;
 	}
 
@@ -3655,7 +3655,7 @@ static void r8153b_ups_en(struct r8152 *tp, bool enable)
 			int i;
 
 			for (i = 0; i < 500; i++) {
-				if (test_bit(RTL8152_UNPLUG, &tp->flags))
+				if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 					return;
 				if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
 				    AUTOLOAD_DONE)
@@ -3697,7 +3697,7 @@ static void r8153c_ups_en(struct r8152 *tp, bool enable)
 			int i;
 
 			for (i = 0; i < 500; i++) {
-				if (test_bit(RTL8152_UNPLUG, &tp->flags))
+				if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 					return;
 				if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
 				    AUTOLOAD_DONE)
@@ -4062,8 +4062,8 @@ static int rtl_phy_patch_request(struct r8152 *tp, bool request, bool wait)
 	for (i = 0; wait && i < 5000; i++) {
 		u32 ocp_data;
 
-		if (test_bit(RTL8152_UNPLUG, &tp->flags))
-			break;
+		if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+			return -ENODEV;
 
 		usleep_range(1000, 2000);
 		ocp_data = ocp_reg_read(tp, OCP_PHY_PATCH_STAT);
@@ -6026,7 +6026,7 @@ static int rtl8156_enable(struct r8152 *tp)
 	u32 ocp_data;
 	u16 speed;
 
-	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 		return -ENODEV;
 
 	r8156_fc_parameter(tp);
@@ -6084,7 +6084,7 @@ static int rtl8156b_enable(struct r8152 *tp)
 	u32 ocp_data;
 	u16 speed;
 
-	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 		return -ENODEV;
 
 	set_tx_qlen(tp);
@@ -6270,7 +6270,7 @@ static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u32 speed, u8 duplex,
 
 static void rtl8152_up(struct r8152 *tp)
 {
-	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 		return;
 
 	r8152_aldps_en(tp, false);
@@ -6280,7 +6280,7 @@ static void rtl8152_up(struct r8152 *tp)
 
 static void rtl8152_down(struct r8152 *tp)
 {
-	if (test_bit(RTL8152_UNPLUG, &tp->flags)) {
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) {
 		rtl_drop_queued_tx(tp);
 		return;
 	}
@@ -6295,7 +6295,7 @@ static void rtl8153_up(struct r8152 *tp)
 {
 	u32 ocp_data;
 
-	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 		return;
 
 	r8153_u1u2en(tp, false);
@@ -6335,7 +6335,7 @@ static void rtl8153_down(struct r8152 *tp)
 {
 	u32 ocp_data;
 
-	if (test_bit(RTL8152_UNPLUG, &tp->flags)) {
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) {
 		rtl_drop_queued_tx(tp);
 		return;
 	}
@@ -6356,7 +6356,7 @@ static void rtl8153b_up(struct r8152 *tp)
 {
 	u32 ocp_data;
 
-	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 		return;
 
 	r8153b_u1u2en(tp, false);
@@ -6380,7 +6380,7 @@ static void rtl8153b_down(struct r8152 *tp)
 {
 	u32 ocp_data;
 
-	if (test_bit(RTL8152_UNPLUG, &tp->flags)) {
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) {
 		rtl_drop_queued_tx(tp);
 		return;
 	}
@@ -6417,7 +6417,7 @@ static void rtl8153c_up(struct r8152 *tp)
 {
 	u32 ocp_data;
 
-	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 		return;
 
 	r8153b_u1u2en(tp, false);
@@ -6498,7 +6498,7 @@ static void rtl8156_up(struct r8152 *tp)
 {
 	u32 ocp_data;
 
-	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 		return;
 
 	r8153b_u1u2en(tp, false);
@@ -6571,7 +6571,7 @@ static void rtl8156_down(struct r8152 *tp)
 {
 	u32 ocp_data;
 
-	if (test_bit(RTL8152_UNPLUG, &tp->flags)) {
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) {
 		rtl_drop_queued_tx(tp);
 		return;
 	}
@@ -6709,7 +6709,7 @@ static void rtl_work_func_t(struct work_struct *work)
 	/* If the device is unplugged or !netif_running(), the workqueue
 	 * doesn't need to wake the device, and could return directly.
 	 */
-	if (test_bit(RTL8152_UNPLUG, &tp->flags) || !netif_running(tp->netdev))
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags) || !netif_running(tp->netdev))
 		return;
 
 	if (usb_autopm_get_interface(tp->intf) < 0)
@@ -6748,7 +6748,7 @@ static void rtl_hw_phy_work_func_t(struct work_struct *work)
 {
 	struct r8152 *tp = container_of(work, struct r8152, hw_phy_work.work);
 
-	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 		return;
 
 	if (usb_autopm_get_interface(tp->intf) < 0)
@@ -6875,7 +6875,7 @@ static int rtl8152_close(struct net_device *netdev)
 	netif_stop_queue(netdev);
 
 	res = usb_autopm_get_interface(tp->intf);
-	if (res < 0 || test_bit(RTL8152_UNPLUG, &tp->flags)) {
+	if (res < 0 || test_bit(RTL8152_INACCESSIBLE, &tp->flags)) {
 		rtl_drop_queued_tx(tp);
 		rtl_stop_rx(tp);
 	} else {
@@ -6908,7 +6908,7 @@ static void r8152b_init(struct r8152 *tp)
 	u32 ocp_data;
 	u16 data;
 
-	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 		return;
 
 	data = r8152_mdio_read(tp, MII_BMCR);
@@ -6952,7 +6952,7 @@ static void r8153_init(struct r8152 *tp)
 	u16 data;
 	int i;
 
-	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 		return;
 
 	r8153_u1u2en(tp, false);
@@ -6963,7 +6963,7 @@ static void r8153_init(struct r8152 *tp)
 			break;
 
 		msleep(20);
-		if (test_bit(RTL8152_UNPLUG, &tp->flags))
+		if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 			break;
 	}
 
@@ -7092,7 +7092,7 @@ static void r8153b_init(struct r8152 *tp)
 	u16 data;
 	int i;
 
-	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 		return;
 
 	r8153b_u1u2en(tp, false);
@@ -7103,7 +7103,7 @@ static void r8153b_init(struct r8152 *tp)
 			break;
 
 		msleep(20);
-		if (test_bit(RTL8152_UNPLUG, &tp->flags))
+		if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 			break;
 	}
 
@@ -7174,7 +7174,7 @@ static void r8153c_init(struct r8152 *tp)
 	u16 data;
 	int i;
 
-	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 		return;
 
 	r8153b_u1u2en(tp, false);
@@ -7194,7 +7194,7 @@ static void r8153c_init(struct r8152 *tp)
 			break;
 
 		msleep(20);
-		if (test_bit(RTL8152_UNPLUG, &tp->flags))
+		if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 			return;
 	}
 
@@ -8023,7 +8023,7 @@ static void r8156_init(struct r8152 *tp)
 	u16 data;
 	int i;
 
-	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 		return;
 
 	ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_ECM_OP);
@@ -8044,7 +8044,7 @@ static void r8156_init(struct r8152 *tp)
 			break;
 
 		msleep(20);
-		if (test_bit(RTL8152_UNPLUG, &tp->flags))
+		if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 			return;
 	}
 
@@ -8119,7 +8119,7 @@ static void r8156b_init(struct r8152 *tp)
 	u16 data;
 	int i;
 
-	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 		return;
 
 	ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_ECM_OP);
@@ -8153,7 +8153,7 @@ static void r8156b_init(struct r8152 *tp)
 			break;
 
 		msleep(20);
-		if (test_bit(RTL8152_UNPLUG, &tp->flags))
+		if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 			return;
 	}
 
@@ -9219,7 +9219,7 @@ static int rtl8152_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
 	struct mii_ioctl_data *data = if_mii(rq);
 	int res;
 
-	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 		return -ENODEV;
 
 	res = usb_autopm_get_interface(tp->intf);
@@ -9321,7 +9321,7 @@ static const struct net_device_ops rtl8152_netdev_ops = {
 
 static void rtl8152_unload(struct r8152 *tp)
 {
-	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 		return;
 
 	if (tp->version != RTL_VER_01)
@@ -9330,7 +9330,7 @@ static void rtl8152_unload(struct r8152 *tp)
 
 static void rtl8153_unload(struct r8152 *tp)
 {
-	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 		return;
 
 	r8153_power_cut_en(tp, false);
@@ -9338,7 +9338,7 @@ static void rtl8153_unload(struct r8152 *tp)
 
 static void rtl8153b_unload(struct r8152 *tp)
 {
-	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
 		return;
 
 	r8153b_power_cut_en(tp, false);
-- 
2.42.0

[PATCH 6.1 025/194] r8152: Add RTL8152_INACCESSIBLE checks to more loops

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit 32a574c7e2685aa8138754d4d755f9246cc6bd48 ]

Previous commits added checks for RTL8152_INACCESSIBLE in the loops in
the driver. There are still a few more that keep tripping the driver
up in error cases and make things take longer than they should. Add
those in.

All the loops that are part of this commit existed in some form or
another since the r8152 driver was first introduced, though
RTL8152_INACCESSIBLE was known as RTL8152_UNPLUG before commit
715f67f33af4 ("r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE")

Fixes: ac718b69301c ("net/usb: new driver for RTL8152")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/r8152.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 76792269222ea..2cee9b2a21615 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -2857,6 +2857,8 @@ static void rtl8152_nic_reset(struct r8152 *tp)
 		ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, CR_RST);
 
 		for (i = 0; i < 1000; i++) {
+			if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+				break;
 			if (!(ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR) & CR_RST))
 				break;
 			usleep_range(100, 400);
@@ -3186,6 +3188,8 @@ static void rtl_disable(struct r8152 *tp)
 	rxdy_gated_en(tp, true);
 
 	for (i = 0; i < 1000; i++) {
+		if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+			break;
 		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
 		if ((ocp_data & FIFO_EMPTY) == FIFO_EMPTY)
 			break;
@@ -3193,6 +3197,8 @@ static void rtl_disable(struct r8152 *tp)
 	}
 
 	for (i = 0; i < 1000; i++) {
+		if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+			break;
 		if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0) & TCR0_TX_EMPTY)
 			break;
 		usleep_range(1000, 2000);
@@ -5381,6 +5387,8 @@ static void wait_oob_link_list_ready(struct r8152 *tp)
 	int i;
 
 	for (i = 0; i < 1000; i++) {
+		if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+			break;
 		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
 		if (ocp_data & LINK_LIST_READY)
 			break;
-- 
2.42.0

[PATCH 6.1 026/194] r8152: Add RTL8152_INACCESSIBLE to r8156b_wait_loading_flash()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit 8a67b47fced9f6a84101eb9ec5ce4c7d64204bc7 ]

Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set
so that they don't delay too long if the device becomes
inaccessible. Add the break to the loop in
r8156b_wait_loading_flash().

Fixes: 195aae321c82 ("r8152: support new chips")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/r8152.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 2cee9b2a21615..8b463a9c5e44c 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -5403,6 +5403,8 @@ static void r8156b_wait_loading_flash(struct r8152 *tp)
 		int i;
 
 		for (i = 0; i < 100; i++) {
+			if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+				break;
 			if (ocp_read_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL) & GPHY_PATCH_DONE)
 				break;
 			usleep_range(1000, 2000);
-- 
2.42.0

[PATCH 6.1 027/194] r8152: Add RTL8152_INACCESSIBLE to r8153_pre_firmware_1()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit 8c53a7bd706535a9cf4e2ec3a4e8d61d46353ca0 ]

Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set
so that they don't delay too long if the device becomes
inaccessible. Add the break to the loop in r8153_pre_firmware_1().

Fixes: 9370f2d05a2a ("r8152: support request_firmware for RTL8153")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/r8152.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 8b463a9c5e44c..b8ad038dd36bf 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -5527,6 +5527,8 @@ static int r8153_pre_firmware_1(struct r8152 *tp)
 	for (i = 0; i < 104; i++) {
 		u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_WDT1_CTRL);
 
+		if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+			return -ENODEV;
 		if (!(ocp_data & WTD1_EN))
 			break;
 		usleep_range(1000, 2000);
-- 
2.42.0

[PATCH 6.1 028/194] r8152: Add RTL8152_INACCESSIBLE to r8153_aldps_en()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit 79321a793945fdbff2f405f84712d0ab81bed287 ]

Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set
so that they don't delay too long if the device becomes
inaccessible. Add the break to the loop in r8153_aldps_en().

Fixes: 4214cc550bf9 ("r8152: check if disabling ALDPS is finished")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/r8152.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index b8ad038dd36bf..4d833781294a4 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -5685,6 +5685,8 @@ static void r8153_aldps_en(struct r8152 *tp, bool enable)
 		data &= ~EN_ALDPS;
 		ocp_reg_write(tp, OCP_POWER_CFG, data);
 		for (i = 0; i < 20; i++) {
+			if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+				return;
 			usleep_range(1000, 2000);
 			if (ocp_read_word(tp, MCU_TYPE_PLA, 0xe000) & 0x0100)
 				break;
-- 
2.42.0

[PATCH 6.1 029/194] mlxbf-bootctl: correctly identify secure boot with development keys

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Thompson <davthompson@nvidia.com>

[ Upstream commit d4eef75279f5e9d594f5785502038c763ce42268 ]

The secure boot state of the BlueField SoC is represented by two bits:
                0 = production state
                1 = secure boot enabled
                2 = non-secure (secure boot disabled)
                3 = RMA state
There is also a single bit to indicate whether production keys or
development keys are being used when secure boot is enabled.
This single bit (specified by MLXBF_BOOTCTL_SB_DEV_MASK) only has
meaning if secure boot state equals 1 (secure boot enabled).

The secure boot states are as follows:
- “GA secured” is when secure boot is enabled with official production keys.
- “Secured (development)” is when secure boot is enabled with development keys.

Without this fix “GA Secured” is displayed on development cards which is
misleading. This patch updates the logic in "lifecycle_state_show()" to
handle the case where the SoC is configured for secure boot and is using
development keys.

Fixes: 79e29cb8fbc5c ("platform/mellanox: Add bootctl driver for Mellanox BlueField Soc")
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20231130183515.17214-1-davthompson@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/mellanox/mlxbf-bootctl.c | 39 +++++++++++++++--------
 1 file changed, 26 insertions(+), 13 deletions(-)

diff --git a/drivers/platform/mellanox/mlxbf-bootctl.c b/drivers/platform/mellanox/mlxbf-bootctl.c
index 1c7a288b59a5c..6a171a4f9dc68 100644
--- a/drivers/platform/mellanox/mlxbf-bootctl.c
+++ b/drivers/platform/mellanox/mlxbf-bootctl.c
@@ -17,6 +17,7 @@
 
 #define MLXBF_BOOTCTL_SB_SECURE_MASK		0x03
 #define MLXBF_BOOTCTL_SB_TEST_MASK		0x0c
+#define MLXBF_BOOTCTL_SB_DEV_MASK		BIT(4)
 
 #define MLXBF_SB_KEY_NUM			4
 
@@ -37,11 +38,18 @@ static struct mlxbf_bootctl_name boot_names[] = {
 	{ MLXBF_BOOTCTL_NONE, "none" },
 };
 
+enum {
+	MLXBF_BOOTCTL_SB_LIFECYCLE_PRODUCTION = 0,
+	MLXBF_BOOTCTL_SB_LIFECYCLE_GA_SECURE = 1,
+	MLXBF_BOOTCTL_SB_LIFECYCLE_GA_NON_SECURE = 2,
+	MLXBF_BOOTCTL_SB_LIFECYCLE_RMA = 3
+};
+
 static const char * const mlxbf_bootctl_lifecycle_states[] = {
-	[0] = "Production",
-	[1] = "GA Secured",
-	[2] = "GA Non-Secured",
-	[3] = "RMA",
+	[MLXBF_BOOTCTL_SB_LIFECYCLE_PRODUCTION] = "Production",
+	[MLXBF_BOOTCTL_SB_LIFECYCLE_GA_SECURE] = "GA Secured",
+	[MLXBF_BOOTCTL_SB_LIFECYCLE_GA_NON_SECURE] = "GA Non-Secured",
+	[MLXBF_BOOTCTL_SB_LIFECYCLE_RMA] = "RMA",
 };
 
 /* ARM SMC call which is atomic and no need for lock. */
@@ -165,25 +173,30 @@ static ssize_t second_reset_action_store(struct device *dev,
 static ssize_t lifecycle_state_show(struct device *dev,
 				    struct device_attribute *attr, char *buf)
 {
+	int status_bits;
+	int use_dev_key;
+	int test_state;
 	int lc_state;
 
-	lc_state = mlxbf_bootctl_smc(MLXBF_BOOTCTL_GET_TBB_FUSE_STATUS,
-				     MLXBF_BOOTCTL_FUSE_STATUS_LIFECYCLE);
-	if (lc_state < 0)
-		return lc_state;
+	status_bits = mlxbf_bootctl_smc(MLXBF_BOOTCTL_GET_TBB_FUSE_STATUS,
+					MLXBF_BOOTCTL_FUSE_STATUS_LIFECYCLE);
+	if (status_bits < 0)
+		return status_bits;
 
-	lc_state &=
-		MLXBF_BOOTCTL_SB_TEST_MASK | MLXBF_BOOTCTL_SB_SECURE_MASK;
+	use_dev_key = status_bits & MLXBF_BOOTCTL_SB_DEV_MASK;
+	test_state = status_bits & MLXBF_BOOTCTL_SB_TEST_MASK;
+	lc_state = status_bits & MLXBF_BOOTCTL_SB_SECURE_MASK;
 
 	/*
 	 * If the test bits are set, we specify that the current state may be
 	 * due to using the test bits.
 	 */
-	if (lc_state & MLXBF_BOOTCTL_SB_TEST_MASK) {
-		lc_state &= MLXBF_BOOTCTL_SB_SECURE_MASK;
-
+	if (test_state) {
 		return sprintf(buf, "%s(test)\n",
 			       mlxbf_bootctl_lifecycle_states[lc_state]);
+	} else if (use_dev_key &&
+		   (lc_state == MLXBF_BOOTCTL_SB_LIFECYCLE_GA_SECURE)) {
+		return sprintf(buf, "Secured (development)\n");
 	}
 
 	return sprintf(buf, "%s\n", mlxbf_bootctl_lifecycle_states[lc_state]);
-- 
2.42.0

[PATCH 6.1 030/194] platform/mellanox: Add null pointer checks for devm_kasprintf()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kunwu Chan <chentao@kylinos.cn>

[ Upstream commit 2c7c857f5fed997be93047d2de853d7f10c8defe ]

devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.

Compile-tested only.

Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Suggested-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20231201055447.2356001-1-chentao@kylinos.cn
[ij: split the change into two]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/mellanox/mlxbf-pmc.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/platform/mellanox/mlxbf-pmc.c b/drivers/platform/mellanox/mlxbf-pmc.c
index 2d4bbe99959ef..925bfc4aef8ce 100644
--- a/drivers/platform/mellanox/mlxbf-pmc.c
+++ b/drivers/platform/mellanox/mlxbf-pmc.c
@@ -1202,6 +1202,8 @@ static int mlxbf_pmc_init_perftype_counter(struct device *dev, int blk_num)
 	attr->dev_attr.show = mlxbf_pmc_event_list_show;
 	attr->nr = blk_num;
 	attr->dev_attr.attr.name = devm_kasprintf(dev, GFP_KERNEL, "event_list");
+	if (!attr->dev_attr.attr.name)
+		return -ENOMEM;
 	pmc->block[blk_num].block_attr[i] = &attr->dev_attr.attr;
 	attr = NULL;
 
@@ -1214,6 +1216,8 @@ static int mlxbf_pmc_init_perftype_counter(struct device *dev, int blk_num)
 		attr->nr = blk_num;
 		attr->dev_attr.attr.name = devm_kasprintf(dev, GFP_KERNEL,
 							  "enable");
+		if (!attr->dev_attr.attr.name)
+			return -ENOMEM;
 		pmc->block[blk_num].block_attr[++i] = &attr->dev_attr.attr;
 		attr = NULL;
 	}
@@ -1240,6 +1244,8 @@ static int mlxbf_pmc_init_perftype_counter(struct device *dev, int blk_num)
 		attr->nr = blk_num;
 		attr->dev_attr.attr.name = devm_kasprintf(dev, GFP_KERNEL,
 							  "counter%d", j);
+		if (!attr->dev_attr.attr.name)
+			return -ENOMEM;
 		pmc->block[blk_num].block_attr[++i] = &attr->dev_attr.attr;
 		attr = NULL;
 
@@ -1251,6 +1257,8 @@ static int mlxbf_pmc_init_perftype_counter(struct device *dev, int blk_num)
 		attr->nr = blk_num;
 		attr->dev_attr.attr.name = devm_kasprintf(dev, GFP_KERNEL,
 							  "event%d", j);
+		if (!attr->dev_attr.attr.name)
+			return -ENOMEM;
 		pmc->block[blk_num].block_attr[++i] = &attr->dev_attr.attr;
 		attr = NULL;
 	}
@@ -1283,6 +1291,8 @@ static int mlxbf_pmc_init_perftype_reg(struct device *dev, int blk_num)
 		attr->nr = blk_num;
 		attr->dev_attr.attr.name = devm_kasprintf(dev, GFP_KERNEL,
 							  events[j].evt_name);
+		if (!attr->dev_attr.attr.name)
+			return -ENOMEM;
 		pmc->block[blk_num].block_attr[i] = &attr->dev_attr.attr;
 		attr = NULL;
 		i++;
@@ -1311,6 +1321,8 @@ static int mlxbf_pmc_create_groups(struct device *dev, int blk_num)
 	pmc->block[blk_num].block_attr_grp.attrs = pmc->block[blk_num].block_attr;
 	pmc->block[blk_num].block_attr_grp.name = devm_kasprintf(
 		dev, GFP_KERNEL, pmc->block_name[blk_num]);
+	if (!pmc->block[blk_num].block_attr_grp.name)
+		return -ENOMEM;
 	pmc->groups[blk_num] = &pmc->block[blk_num].block_attr_grp;
 
 	return 0;
-- 
2.42.0

[PATCH 6.1 031/194] platform/mellanox: Check devm_hwmon_device_register_with_groups() return value

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kunwu Chan <chentao@kylinos.cn>

[ Upstream commit 3494a594315b56516988afb6854d75dee5b501db ]

devm_hwmon_device_register_with_groups() returns an error pointer upon
failure. Check its return value for errors.

Compile-tested only.

Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Suggested-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20231201055447.2356001-1-chentao@kylinos.cn
[ij: split the change into two]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/mellanox/mlxbf-pmc.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/platform/mellanox/mlxbf-pmc.c b/drivers/platform/mellanox/mlxbf-pmc.c
index 925bfc4aef8ce..db7a1d360cd2c 100644
--- a/drivers/platform/mellanox/mlxbf-pmc.c
+++ b/drivers/platform/mellanox/mlxbf-pmc.c
@@ -1454,6 +1454,8 @@ static int mlxbf_pmc_probe(struct platform_device *pdev)
 
 	pmc->hwmon_dev = devm_hwmon_device_register_with_groups(
 		dev, "bfperf", pmc, pmc->groups);
+	if (IS_ERR(pmc->hwmon_dev))
+		return PTR_ERR(pmc->hwmon_dev);
 	platform_set_drvdata(pdev, pmc);
 
 	return 0;
-- 
2.42.0

[PATCH 6.1 032/194] arcnet: restoring support for multiple Sohard Arcnet cards

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Reichinger <thomas.reichinger@sohard.de>

[ Upstream commit 6b17a597fc2f13aaaa0a2780eb7edb9ae7ac9aea ]

Probe of Sohard Arcnet cards fails,
if 2 or more cards are installed in a system.
See kernel log:
[    2.759203] arcnet: arcnet loaded
[    2.763648] arcnet:com20020: COM20020 chipset support (by David Woodhouse et al.)
[    2.770585] arcnet:com20020_pci: COM20020 PCI support
[    2.772295] com20020 0000:02:00.0: enabling device (0000 -> 0003)
[    2.772354] (unnamed net_device) (uninitialized): PLX-PCI Controls
...
[    3.071301] com20020 0000:02:00.0 arc0-0 (uninitialized): PCI COM20020: station FFh found at F080h, IRQ 101.
[    3.071305] com20020 0000:02:00.0 arc0-0 (uninitialized): Using CKP 64 - data rate 2.5 Mb/s
[    3.071534] com20020 0000:07:00.0: enabling device (0000 -> 0003)
[    3.071581] (unnamed net_device) (uninitialized): PLX-PCI Controls
...
[    3.369501] com20020 0000:07:00.0: Led pci:green:tx:0-0 renamed to pci:green:tx:0-0_1 due to name collision
[    3.369535] com20020 0000:07:00.0: Led pci:red:recon:0-0 renamed to pci:red:recon:0-0_1 due to name collision
[    3.370586] com20020 0000:07:00.0 arc0-0 (uninitialized): PCI COM20020: station E1h found at C000h, IRQ 35.
[    3.370589] com20020 0000:07:00.0 arc0-0 (uninitialized): Using CKP 64 - data rate 2.5 Mb/s
[    3.370608] com20020: probe of 0000:07:00.0 failed with error -5

commit 5ef216c1f848 ("arcnet: com20020-pci: add rotary index support")
changes the device name of all COM20020 based PCI cards,
even if only some cards support this:
	snprintf(dev->name, sizeof(dev->name), "arc%d-%d", dev->dev_id, i);

The error happens because all Sohard Arcnet cards would be called arc0-0,
since the Sohard Arcnet cards don't have a PLX rotary coder.
I.e. EAE Arcnet cards have a PLX rotary coder,
which sets the first decimal, ensuring unique devices names.

This patch adds two new card feature flags to indicate
which cards support LEDs and the PLX rotary coder.
For EAE based cards the names still depend on the PLX rotary coder
(untested, since missing EAE hardware).
For Sohard based cards, this patch will result in devices
being called arc0, arc1, ... (tested).

Signed-off-by: Thomas Reichinger <thomas.reichinger@sohard.de>
Fixes: 5ef216c1f848 ("arcnet: com20020-pci: add rotary index support")
Link: https://lore.kernel.org/r/20231130113503.6812-1-thomas.reichinger@sohard.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/arcnet/arcdevice.h    |  2 +
 drivers/net/arcnet/com20020-pci.c | 89 ++++++++++++++++---------------
 2 files changed, 48 insertions(+), 43 deletions(-)

diff --git a/drivers/net/arcnet/arcdevice.h b/drivers/net/arcnet/arcdevice.h
index 19e996a829c9d..b54275389f8ac 100644
--- a/drivers/net/arcnet/arcdevice.h
+++ b/drivers/net/arcnet/arcdevice.h
@@ -186,6 +186,8 @@ do {									\
 #define ARC_IS_5MBIT    1   /* card default speed is 5MBit */
 #define ARC_CAN_10MBIT  2   /* card uses COM20022, supporting 10MBit,
 				 but default is 2.5MBit. */
+#define ARC_HAS_LED     4   /* card has software controlled LEDs */
+#define ARC_HAS_ROTARY  8   /* card has rotary encoder */
 
 /* information needed to define an encapsulation driver */
 struct ArcProto {
diff --git a/drivers/net/arcnet/com20020-pci.c b/drivers/net/arcnet/com20020-pci.c
index c580acb8b1d34..7b5c8bb02f119 100644
--- a/drivers/net/arcnet/com20020-pci.c
+++ b/drivers/net/arcnet/com20020-pci.c
@@ -213,12 +213,13 @@ static int com20020pci_probe(struct pci_dev *pdev,
 		if (!strncmp(ci->name, "EAE PLX-PCI FB2", 15))
 			lp->backplane = 1;
 
-		/* Get the dev_id from the PLX rotary coder */
-		if (!strncmp(ci->name, "EAE PLX-PCI MA1", 15))
-			dev_id_mask = 0x3;
-		dev->dev_id = (inb(priv->misc + ci->rotary) >> 4) & dev_id_mask;
-
-		snprintf(dev->name, sizeof(dev->name), "arc%d-%d", dev->dev_id, i);
+		if (ci->flags & ARC_HAS_ROTARY) {
+			/* Get the dev_id from the PLX rotary coder */
+			if (!strncmp(ci->name, "EAE PLX-PCI MA1", 15))
+				dev_id_mask = 0x3;
+			dev->dev_id = (inb(priv->misc + ci->rotary) >> 4) & dev_id_mask;
+			snprintf(dev->name, sizeof(dev->name), "arc%d-%d", dev->dev_id, i);
+		}
 
 		if (arcnet_inb(ioaddr, COM20020_REG_R_STATUS) == 0xFF) {
 			pr_err("IO address %Xh is empty!\n", ioaddr);
@@ -230,6 +231,10 @@ static int com20020pci_probe(struct pci_dev *pdev,
 			goto err_free_arcdev;
 		}
 
+		ret = com20020_found(dev, IRQF_SHARED);
+		if (ret)
+			goto err_free_arcdev;
+
 		card = devm_kzalloc(&pdev->dev, sizeof(struct com20020_dev),
 				    GFP_KERNEL);
 		if (!card) {
@@ -239,41 +244,39 @@ static int com20020pci_probe(struct pci_dev *pdev,
 
 		card->index = i;
 		card->pci_priv = priv;
-		card->tx_led.brightness_set = led_tx_set;
-		card->tx_led.default_trigger = devm_kasprintf(&pdev->dev,
-						GFP_KERNEL, "arc%d-%d-tx",
-						dev->dev_id, i);
-		card->tx_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
-						"pci:green:tx:%d-%d",
-						dev->dev_id, i);
-
-		card->tx_led.dev = &dev->dev;
-		card->recon_led.brightness_set = led_recon_set;
-		card->recon_led.default_trigger = devm_kasprintf(&pdev->dev,
-						GFP_KERNEL, "arc%d-%d-recon",
-						dev->dev_id, i);
-		card->recon_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
-						"pci:red:recon:%d-%d",
-						dev->dev_id, i);
-		card->recon_led.dev = &dev->dev;
-		card->dev = dev;
-
-		ret = devm_led_classdev_register(&pdev->dev, &card->tx_led);
-		if (ret)
-			goto err_free_arcdev;
 
-		ret = devm_led_classdev_register(&pdev->dev, &card->recon_led);
-		if (ret)
-			goto err_free_arcdev;
-
-		dev_set_drvdata(&dev->dev, card);
-
-		ret = com20020_found(dev, IRQF_SHARED);
-		if (ret)
-			goto err_free_arcdev;
-
-		devm_arcnet_led_init(dev, dev->dev_id, i);
+		if (ci->flags & ARC_HAS_LED) {
+			card->tx_led.brightness_set = led_tx_set;
+			card->tx_led.default_trigger = devm_kasprintf(&pdev->dev,
+							GFP_KERNEL, "arc%d-%d-tx",
+							dev->dev_id, i);
+			card->tx_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
+							"pci:green:tx:%d-%d",
+							dev->dev_id, i);
+
+			card->tx_led.dev = &dev->dev;
+			card->recon_led.brightness_set = led_recon_set;
+			card->recon_led.default_trigger = devm_kasprintf(&pdev->dev,
+							GFP_KERNEL, "arc%d-%d-recon",
+							dev->dev_id, i);
+			card->recon_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
+							"pci:red:recon:%d-%d",
+							dev->dev_id, i);
+			card->recon_led.dev = &dev->dev;
+
+			ret = devm_led_classdev_register(&pdev->dev, &card->tx_led);
+			if (ret)
+				goto err_free_arcdev;
+
+			ret = devm_led_classdev_register(&pdev->dev, &card->recon_led);
+			if (ret)
+				goto err_free_arcdev;
+
+			dev_set_drvdata(&dev->dev, card);
+			devm_arcnet_led_init(dev, dev->dev_id, i);
+		}
 
+		card->dev = dev;
 		list_add(&card->list, &priv->list_dev);
 		continue;
 
@@ -329,7 +332,7 @@ static struct com20020_pci_card_info card_info_5mbit = {
 };
 
 static struct com20020_pci_card_info card_info_sohard = {
-	.name = "PLX-PCI",
+	.name = "SOHARD SH ARC-PCI",
 	.devcount = 1,
 	/* SOHARD needs PCI base addr 4 */
 	.chan_map_tbl = {
@@ -364,7 +367,7 @@ static struct com20020_pci_card_info card_info_eae_arc1 = {
 		},
 	},
 	.rotary = 0x0,
-	.flags = ARC_CAN_10MBIT,
+	.flags = ARC_HAS_ROTARY | ARC_HAS_LED | ARC_CAN_10MBIT,
 };
 
 static struct com20020_pci_card_info card_info_eae_ma1 = {
@@ -396,7 +399,7 @@ static struct com20020_pci_card_info card_info_eae_ma1 = {
 		},
 	},
 	.rotary = 0x0,
-	.flags = ARC_CAN_10MBIT,
+	.flags = ARC_HAS_ROTARY | ARC_HAS_LED | ARC_CAN_10MBIT,
 };
 
 static struct com20020_pci_card_info card_info_eae_fb2 = {
@@ -421,7 +424,7 @@ static struct com20020_pci_card_info card_info_eae_fb2 = {
 		},
 	},
 	.rotary = 0x0,
-	.flags = ARC_CAN_10MBIT,
+	.flags = ARC_HAS_ROTARY | ARC_HAS_LED | ARC_CAN_10MBIT,
 };
 
 static const struct pci_device_id com20020pci_id_table[] = {
-- 
2.42.0

[PATCH 6.1 033/194] octeontx2-pf: consider both Rx and Tx packet stats for adaptive interrupt coalescing

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Naveen Mamindlapalli <naveenm@marvell.com>

[ Upstream commit adbf100fc47001c93d7e513ecac6fd6e04d5b4a1 ]

The current adaptive interrupt coalescing code updates only rx
packet stats for dim algorithm. This patch also updates tx packet
stats which will be useful when there is only tx traffic.
Also moved configuring hardware adaptive interrupt setting to
driver dim callback.

Fixes: 6e144b47f560 ("octeontx2-pf: Add support for adaptive interrupt coalescing")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://lore.kernel.org/r/20231201053330.3903694-1-sumang@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../ethernet/marvell/octeontx2/nic/otx2_pf.c  |  9 +++++++++
 .../marvell/octeontx2/nic/otx2_txrx.c         | 20 +++++++++----------
 2 files changed, 19 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
index 18c5d2b3f7f95..55807e2043edf 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
@@ -1676,6 +1676,14 @@ static void otx2_do_set_rx_mode(struct otx2_nic *pf)
 	mutex_unlock(&pf->mbox.lock);
 }
 
+static void otx2_set_irq_coalesce(struct otx2_nic *pfvf)
+{
+	int cint;
+
+	for (cint = 0; cint < pfvf->hw.cint_cnt; cint++)
+		otx2_config_irq_coalescing(pfvf, cint);
+}
+
 static void otx2_dim_work(struct work_struct *w)
 {
 	struct dim_cq_moder cur_moder;
@@ -1691,6 +1699,7 @@ static void otx2_dim_work(struct work_struct *w)
 		CQ_TIMER_THRESH_MAX : cur_moder.usec;
 	pfvf->hw.cq_ecount_wait = (cur_moder.pkts > NAPI_POLL_WEIGHT) ?
 		NAPI_POLL_WEIGHT : cur_moder.pkts;
+	otx2_set_irq_coalesce(pfvf);
 	dim->state = DIM_START_MEASURE;
 }
 
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c
index 20d801d30c732..aee392a15b23c 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c
@@ -510,11 +510,18 @@ static void otx2_adjust_adaptive_coalese(struct otx2_nic *pfvf, struct otx2_cq_p
 {
 	struct dim_sample dim_sample;
 	u64 rx_frames, rx_bytes;
+	u64 tx_frames, tx_bytes;
 
 	rx_frames = OTX2_GET_RX_STATS(RX_BCAST) + OTX2_GET_RX_STATS(RX_MCAST) +
 		OTX2_GET_RX_STATS(RX_UCAST);
 	rx_bytes = OTX2_GET_RX_STATS(RX_OCTS);
-	dim_update_sample(pfvf->napi_events, rx_frames, rx_bytes, &dim_sample);
+	tx_bytes = OTX2_GET_TX_STATS(TX_OCTS);
+	tx_frames = OTX2_GET_TX_STATS(TX_UCAST);
+
+	dim_update_sample(pfvf->napi_events,
+			  rx_frames + tx_frames,
+			  rx_bytes + tx_bytes,
+			  &dim_sample);
 	net_dim(&cq_poll->dim, dim_sample);
 }
 
@@ -555,16 +562,9 @@ int otx2_napi_handler(struct napi_struct *napi, int budget)
 		if (pfvf->flags & OTX2_FLAG_INTF_DOWN)
 			return workdone;
 
-		/* Check for adaptive interrupt coalesce */
-		if (workdone != 0 &&
-		    ((pfvf->flags & OTX2_FLAG_ADPTV_INT_COAL_ENABLED) ==
-		     OTX2_FLAG_ADPTV_INT_COAL_ENABLED)) {
-			/* Adjust irq coalese using net_dim */
+		/* Adjust irq coalese using net_dim */
+		if (pfvf->flags & OTX2_FLAG_ADPTV_INT_COAL_ENABLED)
 			otx2_adjust_adaptive_coalese(pfvf, cq_poll);
-			/* Update irq coalescing */
-			for (i = 0; i < pfvf->hw.cint_cnt; i++)
-				otx2_config_irq_coalescing(pfvf, i);
-		}
 
 		/* Re-enable interrupts */
 		otx2_write64(pfvf, NIX_LF_CINTX_ENA_W1S(cq_poll->cint_idx),
-- 
2.42.0

[PATCH 6.1 034/194] net: stmmac: fix FPE events losing

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jianheng Zhang <Jianheng.Zhang@synopsys.com>

[ Upstream commit 37e4b8df27bc68340f3fc80dbb27e3549c7f881c ]

The status bits of register MAC_FPE_CTRL_STS are clear on read. Using
32-bit read for MAC_FPE_CTRL_STS in dwmac5_fpe_configure() and
dwmac5_fpe_send_mpacket() clear the status bits. Then the stmmac interrupt
handler missing FPE event status and leads to FPE handshaking failure and
retries.
To avoid clear status bits of MAC_FPE_CTRL_STS in dwmac5_fpe_configure()
and dwmac5_fpe_send_mpacket(), add fpe_csr to stmmac_fpe_cfg structure to
cache the control bits of MAC_FPE_CTRL_STS and to avoid reading
MAC_FPE_CTRL_STS in those methods.

Fixes: 5a5586112b92 ("net: stmmac: support FPE link partner hand-shaking procedure")
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Jianheng Zhang <Jianheng.Zhang@synopsys.com>
Link: https://lore.kernel.org/r/CY5PR12MB637225A7CF529D5BE0FBE59CBF81A@CY5PR12MB6372.namprd12.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac5.c  | 45 ++++++++-----------
 drivers/net/ethernet/stmicro/stmmac/dwmac5.h  |  4 +-
 .../ethernet/stmicro/stmmac/dwxgmac2_core.c   |  3 +-
 drivers/net/ethernet/stmicro/stmmac/hwif.h    |  4 +-
 .../net/ethernet/stmicro/stmmac/stmmac_main.c |  8 +++-
 .../net/ethernet/stmicro/stmmac/stmmac_tc.c   |  1 +
 include/linux/stmmac.h                        |  1 +
 7 files changed, 36 insertions(+), 30 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
index e95d35f1e5a0c..8fd167501fa0e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
@@ -710,28 +710,22 @@ void dwmac5_est_irq_status(void __iomem *ioaddr, struct net_device *dev,
 	}
 }
 
-void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
+void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
+			  u32 num_txq, u32 num_rxq,
 			  bool enable)
 {
 	u32 value;
 
-	if (!enable) {
-		value = readl(ioaddr + MAC_FPE_CTRL_STS);
-
-		value &= ~EFPE;
-
-		writel(value, ioaddr + MAC_FPE_CTRL_STS);
-		return;
+	if (enable) {
+		cfg->fpe_csr = EFPE;
+		value = readl(ioaddr + GMAC_RXQ_CTRL1);
+		value &= ~GMAC_RXQCTRL_FPRQ;
+		value |= (num_rxq - 1) << GMAC_RXQCTRL_FPRQ_SHIFT;
+		writel(value, ioaddr + GMAC_RXQ_CTRL1);
+	} else {
+		cfg->fpe_csr = 0;
 	}
-
-	value = readl(ioaddr + GMAC_RXQ_CTRL1);
-	value &= ~GMAC_RXQCTRL_FPRQ;
-	value |= (num_rxq - 1) << GMAC_RXQCTRL_FPRQ_SHIFT;
-	writel(value, ioaddr + GMAC_RXQ_CTRL1);
-
-	value = readl(ioaddr + MAC_FPE_CTRL_STS);
-	value |= EFPE;
-	writel(value, ioaddr + MAC_FPE_CTRL_STS);
+	writel(cfg->fpe_csr, ioaddr + MAC_FPE_CTRL_STS);
 }
 
 int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev)
@@ -741,6 +735,9 @@ int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev)
 
 	status = FPE_EVENT_UNKNOWN;
 
+	/* Reads from the MAC_FPE_CTRL_STS register should only be performed
+	 * here, since the status flags of MAC_FPE_CTRL_STS are "clear on read"
+	 */
 	value = readl(ioaddr + MAC_FPE_CTRL_STS);
 
 	if (value & TRSP) {
@@ -766,19 +763,15 @@ int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev)
 	return status;
 }
 
-void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, enum stmmac_mpacket_type type)
+void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
+			     enum stmmac_mpacket_type type)
 {
-	u32 value;
+	u32 value = cfg->fpe_csr;
 
-	value = readl(ioaddr + MAC_FPE_CTRL_STS);
-
-	if (type == MPACKET_VERIFY) {
-		value &= ~SRSP;
+	if (type == MPACKET_VERIFY)
 		value |= SVER;
-	} else {
-		value &= ~SVER;
+	else if (type == MPACKET_RESPONSE)
 		value |= SRSP;
-	}
 
 	writel(value, ioaddr + MAC_FPE_CTRL_STS);
 }
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
index 53c138d0ff480..34e620790eb37 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
@@ -153,9 +153,11 @@ int dwmac5_est_configure(void __iomem *ioaddr, struct stmmac_est *cfg,
 			 unsigned int ptp_rate);
 void dwmac5_est_irq_status(void __iomem *ioaddr, struct net_device *dev,
 			   struct stmmac_extra_stats *x, u32 txqcnt);
-void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
+void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
+			  u32 num_txq, u32 num_rxq,
 			  bool enable);
 void dwmac5_fpe_send_mpacket(void __iomem *ioaddr,
+			     struct stmmac_fpe_cfg *cfg,
 			     enum stmmac_mpacket_type type);
 int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev);
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
index f30e08a106cbe..c2181c277291b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
@@ -1441,7 +1441,8 @@ static int dwxgmac3_est_configure(void __iomem *ioaddr, struct stmmac_est *cfg,
 	return 0;
 }
 
-static void dwxgmac3_fpe_configure(void __iomem *ioaddr, u32 num_txq,
+static void dwxgmac3_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
+				   u32 num_txq,
 				   u32 num_rxq, bool enable)
 {
 	u32 value;
diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h
index 592b4067f9b8f..b2b9cf04bc726 100644
--- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
+++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
@@ -392,9 +392,11 @@ struct stmmac_ops {
 			     unsigned int ptp_rate);
 	void (*est_irq_status)(void __iomem *ioaddr, struct net_device *dev,
 			       struct stmmac_extra_stats *x, u32 txqcnt);
-	void (*fpe_configure)(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
+	void (*fpe_configure)(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
+			      u32 num_txq, u32 num_rxq,
 			      bool enable);
 	void (*fpe_send_mpacket)(void __iomem *ioaddr,
+				 struct stmmac_fpe_cfg *cfg,
 				 enum stmmac_mpacket_type type);
 	int (*fpe_irq_status)(void __iomem *ioaddr, struct net_device *dev);
 };
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 9f76c2f7d513b..69aac8ed84f67 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -957,7 +957,8 @@ static void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool is_up)
 	bool *hs_enable = &fpe_cfg->hs_enable;
 
 	if (is_up && *hs_enable) {
-		stmmac_fpe_send_mpacket(priv, priv->ioaddr, MPACKET_VERIFY);
+		stmmac_fpe_send_mpacket(priv, priv->ioaddr, fpe_cfg,
+					MPACKET_VERIFY);
 	} else {
 		*lo_state = FPE_STATE_OFF;
 		*lp_state = FPE_STATE_OFF;
@@ -5704,6 +5705,7 @@ static void stmmac_fpe_event_status(struct stmmac_priv *priv, int status)
 		/* If user has requested FPE enable, quickly response */
 		if (*hs_enable)
 			stmmac_fpe_send_mpacket(priv, priv->ioaddr,
+						fpe_cfg,
 						MPACKET_RESPONSE);
 	}
 
@@ -7028,6 +7030,7 @@ static void stmmac_fpe_lp_task(struct work_struct *work)
 		if (*lo_state == FPE_STATE_ENTERING_ON &&
 		    *lp_state == FPE_STATE_ENTERING_ON) {
 			stmmac_fpe_configure(priv, priv->ioaddr,
+					     fpe_cfg,
 					     priv->plat->tx_queues_to_use,
 					     priv->plat->rx_queues_to_use,
 					     *enable);
@@ -7046,6 +7049,7 @@ static void stmmac_fpe_lp_task(struct work_struct *work)
 			netdev_info(priv->dev, SEND_VERIFY_MPAKCET_FMT,
 				    *lo_state, *lp_state);
 			stmmac_fpe_send_mpacket(priv, priv->ioaddr,
+						fpe_cfg,
 						MPACKET_VERIFY);
 		}
 		/* Sleep then retry */
@@ -7060,6 +7064,7 @@ void stmmac_fpe_handshake(struct stmmac_priv *priv, bool enable)
 	if (priv->plat->fpe_cfg->hs_enable != enable) {
 		if (enable) {
 			stmmac_fpe_send_mpacket(priv, priv->ioaddr,
+						priv->plat->fpe_cfg,
 						MPACKET_VERIFY);
 		} else {
 			priv->plat->fpe_cfg->lo_fpe_state = FPE_STATE_OFF;
@@ -7472,6 +7477,7 @@ int stmmac_suspend(struct device *dev)
 	if (priv->dma_cap.fpesel) {
 		/* Disable FPE */
 		stmmac_fpe_configure(priv, priv->ioaddr,
+				     priv->plat->fpe_cfg,
 				     priv->plat->tx_queues_to_use,
 				     priv->plat->rx_queues_to_use, false);
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index 773e415cc2de6..390c900832cd2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
@@ -1073,6 +1073,7 @@ static int tc_setup_taprio(struct stmmac_priv *priv,
 
 	priv->plat->fpe_cfg->enable = false;
 	stmmac_fpe_configure(priv, priv->ioaddr,
+			     priv->plat->fpe_cfg,
 			     priv->plat->tx_queues_to_use,
 			     priv->plat->rx_queues_to_use,
 			     false);
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index d82ff9fa1a6e8..9f4a4f70270df 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -172,6 +172,7 @@ struct stmmac_fpe_cfg {
 	bool hs_enable;				/* FPE handshake enable */
 	enum stmmac_fpe_state lp_fpe_state;	/* Link Partner FPE state */
 	enum stmmac_fpe_state lo_fpe_state;	/* Local station FPE state */
+	u32 fpe_csr;				/* MAC_FPE_CTRL_STS reg cache */
 };
 
 struct stmmac_safety_feature_cfg {
-- 
2.42.0

[PATCH 6.1 035/194] xsk: Skip polling event check for unbound socket

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yewon Choi <woni9911@gmail.com>

[ Upstream commit e4d008d49a7135214e0ee70537405b6a069e3a3f ]

In xsk_poll(), checking available events and setting mask bits should
be executed only when a socket has been bound. Setting mask bits for
unbound socket is meaningless.

Currently, it checks events even when xsk_check_common() failed.
To prevent this, we move goto location (skip_tx) after that checking.

Fixes: 1596dae2f17e ("xsk: check IFF_UP earlier in Tx path")
Signed-off-by: Yewon Choi <woni9911@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20231201061048.GA1510@libra05
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xdp/xsk.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c
index f7592638e61d3..5c8e02d56fd43 100644
--- a/net/xdp/xsk.c
+++ b/net/xdp/xsk.c
@@ -722,7 +722,7 @@ static __poll_t xsk_poll(struct file *file, struct socket *sock,
 
 	rcu_read_lock();
 	if (xsk_check_common(xs))
-		goto skip_tx;
+		goto out;
 
 	pool = xs->pool;
 
@@ -734,12 +734,11 @@ static __poll_t xsk_poll(struct file *file, struct socket *sock,
 			xsk_generic_xmit(sk);
 	}
 
-skip_tx:
 	if (xs->rx && !xskq_prod_is_empty(xs->rx))
 		mask |= EPOLLIN | EPOLLRDNORM;
 	if (xs->tx && xsk_tx_writeable(xs))
 		mask |= EPOLLOUT | EPOLLWRNORM;
-
+out:
 	rcu_read_unlock();
 	return mask;
 }
-- 
2.42.0

[PATCH 6.1 036/194] octeontx2-af: fix a use-after-free in rvu_npa_register_reporters

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zhipeng Lu <alexious@zju.edu.cn>

[ Upstream commit 3c91c909f13f0c32b0d54d75c3f798479b1a84f5 ]

The rvu_dl will be freed in rvu_npa_health_reporters_destroy(rvu_dl)
after the create_workqueue fails, and after that free, the rvu_dl will
be translate back through rvu_npa_health_reporters_create,
rvu_health_reporters_create, and rvu_register_dl. Finally it goes to the
err_dl_health label, being freed again in
rvu_health_reporters_destroy(rvu) by rvu_npa_health_reporters_destroy.
In the second calls of rvu_npa_health_reporters_destroy, however,
it uses rvu_dl->rvu_npa_health_reporter, which is already freed at
the end of rvu_npa_health_reporters_destroy in the first call.

So this patch prevents the first destroy by instantly returning -ENONMEN
when create_workqueue fails. In addition, since the failure of
create_workqueue is the only entrence of label err, it has been
integrated into the error-handling path of create_workqueue.

Fixes: f1168d1e207c ("octeontx2-af: Add devlink health reporters for NPA")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Geethasowjanya Akula <gakula@marvell.com>
Link: https://lore.kernel.org/r/20231202095902.3264863-1-alexious@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c
index dc7bd2ce78f7d..d609512998992 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c
@@ -1285,7 +1285,7 @@ static int rvu_npa_register_reporters(struct rvu_devlink *rvu_dl)
 
 	rvu_dl->devlink_wq = create_workqueue("rvu_devlink_wq");
 	if (!rvu_dl->devlink_wq)
-		goto err;
+		return -ENOMEM;
 
 	INIT_WORK(&rvu_reporters->intr_work, rvu_npa_intr_work);
 	INIT_WORK(&rvu_reporters->err_work, rvu_npa_err_work);
@@ -1293,9 +1293,6 @@ static int rvu_npa_register_reporters(struct rvu_devlink *rvu_dl)
 	INIT_WORK(&rvu_reporters->ras_work, rvu_npa_ras_work);
 
 	return 0;
-err:
-	rvu_npa_health_reporters_destroy(rvu_dl);
-	return -ENOMEM;
 }
 
 static int rvu_npa_health_reporters_create(struct rvu_devlink *rvu_dl)
-- 
2.42.0

[PATCH 6.1 037/194] i40e: Fix unexpected MFS warning message

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ivan Vecera <ivecera@redhat.com>

[ Upstream commit 7d9f22b3d3ef379ed05bd3f3e2de83dfa8da8258 ]

Commit 3a2c6ced90e1 ("i40e: Add a check to see if MFS is set") added
a warning message that reports unexpected size of port's MFS (max
frame size) value. This message use for the port number local
variable 'i' that is wrong.
In i40e_probe() this 'i' variable is used only to iterate VSIs
to find FDIR VSI:

<code>
...
/* if FDIR VSI was set up, start it now */
        for (i = 0; i < pf->num_alloc_vsi; i++) {
                if (pf->vsi[i] && pf->vsi[i]->type == I40E_VSI_FDIR) {
                        i40e_vsi_open(pf->vsi[i]);
                        break;
                }
        }
...
</code>

So the warning message use for the port number index of FDIR VSI
if this exists or pf->num_alloc_vsi if not.

Fix the message by using 'pf->hw.port' for the port number.

Fixes: 3a2c6ced90e1 ("i40e: Add a check to see if MFS is set")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 9f5824eb8808a..b4157ff370a31 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -16158,7 +16158,7 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	       I40E_PRTGL_SAH_MFS_MASK) >> I40E_PRTGL_SAH_MFS_SHIFT;
 	if (val < MAX_FRAME_SIZE_DEFAULT)
 		dev_warn(&pdev->dev, "MFS for port %x has been set below the default: %x\n",
-			 i, val);
+			 pf->hw.port, val);
 
 	/* Add a filter to drop all Flow control frames from any VSI from being
 	 * transmitted. By doing so we stop a malicious VF from sending out
-- 
2.42.0

[PATCH 6.1 038/194] iavf: validate tx_coalesce_usecs even if rx_coalesce_usecs is zero

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jacob Keller <jacob.e.keller@intel.com>

[ Upstream commit a206d9959f5ccd0fb2d54a997c993947ae0e881c ]

In __iavf_set_coalesce, the driver checks both ec->rx_coalesce_usecs and
ec->tx_coalesce_usecs for validity. It does this via a chain if if/else-if
blocks. If every single branch of the series of if statements exited, this
would be fine. However, the rx_coalesce_usecs is checked against zero to
print an informative message if use_adaptive_rx_coalesce is enabled. If
this check is true, it short circuits the entire chain of statements,
preventing validation of the tx_coalesce_usecs field.

Indeed, since commit e792779e6b63 ("iavf: Prevent changing static ITR
values if adaptive moderation is on") the iavf driver actually rejects any
change to the tx_coalesce_usecs or rx_coalesce_usecs when
use_adaptive_tx_coalesce or use_adaptive_rx_coalesce is enabled, making
this checking a bit redundant.

Fix this error by removing the unnecessary and redundant checks for
use_adaptive_rx_coalesce and use_adaptive_tx_coalesce. Since zero is a
valid value, and since the tx_coalesce_usecs and rx_coalesce_usecs fields
are already unsigned, remove the minimum value check. This allows assigning
an ITR value ranging from 0-8160 as described by the printed message.

Fixes: 65e87c0398f5 ("i40evf: support queue-specific settings for interrupt moderation")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/iavf/iavf_ethtool.c | 12 ++----------
 drivers/net/ethernet/intel/iavf/iavf_txrx.h    |  1 -
 2 files changed, 2 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c
index c13b4fa659ee9..31e02624aca48 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c
@@ -829,18 +829,10 @@ static int __iavf_set_coalesce(struct net_device *netdev,
 	struct iavf_adapter *adapter = netdev_priv(netdev);
 	int i;
 
-	if (ec->rx_coalesce_usecs == 0) {
-		if (ec->use_adaptive_rx_coalesce)
-			netif_info(adapter, drv, netdev, "rx-usecs=0, need to disable adaptive-rx for a complete disable\n");
-	} else if ((ec->rx_coalesce_usecs < IAVF_MIN_ITR) ||
-		   (ec->rx_coalesce_usecs > IAVF_MAX_ITR)) {
+	if (ec->rx_coalesce_usecs > IAVF_MAX_ITR) {
 		netif_info(adapter, drv, netdev, "Invalid value, rx-usecs range is 0-8160\n");
 		return -EINVAL;
-	} else if (ec->tx_coalesce_usecs == 0) {
-		if (ec->use_adaptive_tx_coalesce)
-			netif_info(adapter, drv, netdev, "tx-usecs=0, need to disable adaptive-tx for a complete disable\n");
-	} else if ((ec->tx_coalesce_usecs < IAVF_MIN_ITR) ||
-		   (ec->tx_coalesce_usecs > IAVF_MAX_ITR)) {
+	} else if (ec->tx_coalesce_usecs > IAVF_MAX_ITR) {
 		netif_info(adapter, drv, netdev, "Invalid value, tx-usecs range is 0-8160\n");
 		return -EINVAL;
 	}
diff --git a/drivers/net/ethernet/intel/iavf/iavf_txrx.h b/drivers/net/ethernet/intel/iavf/iavf_txrx.h
index 7e6ee32d19b69..10ba36602c0c1 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_txrx.h
+++ b/drivers/net/ethernet/intel/iavf/iavf_txrx.h
@@ -15,7 +15,6 @@
  */
 #define IAVF_ITR_DYNAMIC	0x8000	/* use top bit as a flag */
 #define IAVF_ITR_MASK		0x1FFE	/* mask for ITR register value */
-#define IAVF_MIN_ITR		     2	/* reg uses 2 usec resolution */
 #define IAVF_ITR_100K		    10	/* all values below must be even */
 #define IAVF_ITR_50K		    20
 #define IAVF_ITR_20K		    50
-- 
2.42.0

[PATCH 6.1 039/194] net: bnxt: fix a potential use-after-free in bnxt_init_tc

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit d007caaaf052f82ca2340d4c7b32d04a3f5dbf3f ]

When flow_indr_dev_register() fails, bnxt_init_tc will free
bp->tc_info through kfree(). However, the caller function
bnxt_init_one() will ignore this failure and call
bnxt_shutdown_tc() on failure of bnxt_dl_register(), where
a use-after-free happens. Fix this issue by setting
bp->tc_info to NULL after kfree().

Fixes: 627c89d00fb9 ("bnxt_en: flow_offload: offload tunnel decap rules via indirect callbacks")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Link: https://lore.kernel.org/r/20231204024004.8245-1-dinghao.liu@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c
index d8afcf8d6b30e..4d6663ff84722 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c
@@ -2075,6 +2075,7 @@ int bnxt_init_tc(struct bnxt *bp)
 	rhashtable_destroy(&tc_info->flow_table);
 free_tc_info:
 	kfree(tc_info);
+	bp->tc_info = NULL;
 	return rc;
 }
 
-- 
2.42.0

[PATCH 6.1 040/194] tcp: fix mid stream window clamp.

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paolo Abeni <pabeni@redhat.com>

[ Upstream commit 58d3aade20cdddbac6c9707ac0f3f5f8c1278b74 ]

After the blamed commit below, if the user-space application performs
window clamping when tp->rcv_wnd is 0, the TCP socket will never be
able to announce a non 0 receive window, even after completely emptying
the receive buffer and re-setting the window clamp to higher values.

Refactor tcp_set_window_clamp() to address the issue: when the user
decreases the current clamp value, set rcv_ssthresh according to the
same logic used at buffer initialization, but ensuring reserved mem
provisioning.

To avoid code duplication factor-out the relevant bits from
tcp_adjust_rcv_ssthresh() in a new helper and reuse it in the above
scenario.

When increasing the clamp value, give the rcv_ssthresh a chance to grow
according to previously implemented heuristic.

Fixes: 3aa7857fe1d7 ("tcp: enable mid stream window clamp")
Reported-by: David Gibson <david@gibson.dropbear.id.au>
Reported-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/705dad54e6e6e9a010e571bf58e0b35a8ae70503.1701706073.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/tcp.h |  9 +++++++--
 net/ipv4/tcp.c    | 22 +++++++++++++++++++---
 2 files changed, 26 insertions(+), 5 deletions(-)

diff --git a/include/net/tcp.h b/include/net/tcp.h
index 19646fdec23dc..c3d56b337f358 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -1460,17 +1460,22 @@ static inline int tcp_full_space(const struct sock *sk)
 	return tcp_win_from_space(sk, READ_ONCE(sk->sk_rcvbuf));
 }
 
-static inline void tcp_adjust_rcv_ssthresh(struct sock *sk)
+static inline void __tcp_adjust_rcv_ssthresh(struct sock *sk, u32 new_ssthresh)
 {
 	int unused_mem = sk_unused_reserved_mem(sk);
 	struct tcp_sock *tp = tcp_sk(sk);
 
-	tp->rcv_ssthresh = min(tp->rcv_ssthresh, 4U * tp->advmss);
+	tp->rcv_ssthresh = min(tp->rcv_ssthresh, new_ssthresh);
 	if (unused_mem)
 		tp->rcv_ssthresh = max_t(u32, tp->rcv_ssthresh,
 					 tcp_win_from_space(sk, unused_mem));
 }
 
+static inline void tcp_adjust_rcv_ssthresh(struct sock *sk)
+{
+	__tcp_adjust_rcv_ssthresh(sk, 4U * tcp_sk(sk)->advmss);
+}
+
 void tcp_cleanup_rbuf(struct sock *sk, int copied);
 void __tcp_cleanup_rbuf(struct sock *sk, int copied);
 
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 288678f17ccaf..58409ea2da0af 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -3473,9 +3473,25 @@ int tcp_set_window_clamp(struct sock *sk, int val)
 			return -EINVAL;
 		tp->window_clamp = 0;
 	} else {
-		tp->window_clamp = val < SOCK_MIN_RCVBUF / 2 ?
-			SOCK_MIN_RCVBUF / 2 : val;
-		tp->rcv_ssthresh = min(tp->rcv_wnd, tp->window_clamp);
+		u32 new_rcv_ssthresh, old_window_clamp = tp->window_clamp;
+		u32 new_window_clamp = val < SOCK_MIN_RCVBUF / 2 ?
+						SOCK_MIN_RCVBUF / 2 : val;
+
+		if (new_window_clamp == old_window_clamp)
+			return 0;
+
+		tp->window_clamp = new_window_clamp;
+		if (new_window_clamp < old_window_clamp) {
+			/* need to apply the reserved mem provisioning only
+			 * when shrinking the window clamp
+			 */
+			__tcp_adjust_rcv_ssthresh(sk, tp->window_clamp);
+
+		} else {
+			new_rcv_ssthresh = min(tp->rcv_wnd, tp->window_clamp);
+			tp->rcv_ssthresh = max(new_rcv_ssthresh,
+					       tp->rcv_ssthresh);
+		}
 	}
 	return 0;
 }
-- 
2.42.0

[PATCH 6.1 041/194] ionic: fix snprintf format length warning

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shannon Nelson <shannon.nelson@amd.com>

[ Upstream commit 0ceb3860a67652f9d36dfdecfcd2cb3eb2f4537d ]

Our friendly kernel test robot has reminded us that with a new
check we have a warning about a potential string truncation.
In this case it really doesn't hurt anything, but it is worth
addressing especially since there really is no reason to reserve
so many bytes for our queue names.  It seems that cutting the
queue name buffer length in half stops the complaint.

Fixes: c06107cabea3 ("ionic: more ionic name tweaks")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311300201.lO8v7mKU-lkp@intel.com/
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231204192234.21017-2-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/pensando/ionic/ionic_dev.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/pensando/ionic/ionic_dev.h b/drivers/net/ethernet/pensando/ionic/ionic_dev.h
index 93a4258421667..13dfcf9f75dad 100644
--- a/drivers/net/ethernet/pensando/ionic/ionic_dev.h
+++ b/drivers/net/ethernet/pensando/ionic/ionic_dev.h
@@ -214,7 +214,7 @@ struct ionic_desc_info {
 	void *cb_arg;
 };
 
-#define IONIC_QUEUE_NAME_MAX_SZ		32
+#define IONIC_QUEUE_NAME_MAX_SZ		16
 
 struct ionic_queue {
 	struct device *dev;
-- 
2.42.0

[PATCH 6.1 042/194] ionic: Fix dim work handling in split interrupt mode

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brett Creeley <brett.creeley@amd.com>

[ Upstream commit 4115ba677c35f694b62298e55f0e04ce84eed469 ]

Currently ionic_dim_work() is incorrect when in
split interrupt mode. This is because the interrupt
rate is only being changed for the Rx side even for
dim running on Tx. Fix this by using the qcq from
the container_of macro. Also, introduce some local
variables for a bit of cleanup.

Fixes: a6ff85e0a2d9 ("ionic: remove intr coalesce update from napi")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231204192234.21017-3-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/pensando/ionic/ionic_lif.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/pensando/ionic/ionic_lif.c b/drivers/net/ethernet/pensando/ionic/ionic_lif.c
index a89ab455af67d..f7634884c7508 100644
--- a/drivers/net/ethernet/pensando/ionic/ionic_lif.c
+++ b/drivers/net/ethernet/pensando/ionic/ionic_lif.c
@@ -46,24 +46,24 @@ static void ionic_lif_queue_identify(struct ionic_lif *lif);
 static void ionic_dim_work(struct work_struct *work)
 {
 	struct dim *dim = container_of(work, struct dim, work);
+	struct ionic_intr_info *intr;
 	struct dim_cq_moder cur_moder;
 	struct ionic_qcq *qcq;
+	struct ionic_lif *lif;
 	u32 new_coal;
 
 	cur_moder = net_dim_get_rx_moderation(dim->mode, dim->profile_ix);
 	qcq = container_of(dim, struct ionic_qcq, dim);
-	new_coal = ionic_coal_usec_to_hw(qcq->q.lif->ionic, cur_moder.usec);
+	lif = qcq->q.lif;
+	new_coal = ionic_coal_usec_to_hw(lif->ionic, cur_moder.usec);
 	new_coal = new_coal ? new_coal : 1;
 
-	if (qcq->intr.dim_coal_hw != new_coal) {
-		unsigned int qi = qcq->cq.bound_q->index;
-		struct ionic_lif *lif = qcq->q.lif;
-
-		qcq->intr.dim_coal_hw = new_coal;
+	intr = &qcq->intr;
+	if (intr->dim_coal_hw != new_coal) {
+		intr->dim_coal_hw = new_coal;
 
 		ionic_intr_coal_init(lif->ionic->idev.intr_ctrl,
-				     lif->rxqcqs[qi]->intr.index,
-				     qcq->intr.dim_coal_hw);
+				     intr->index, intr->dim_coal_hw);
 	}
 
 	dim->state = DIM_START_MEASURE;
-- 
2.42.0

[PATCH 6.1 043/194] ipv4: ip_gre: Avoid skb_pull() failure in ipgre_xmit()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shigeru Yoshida <syoshida@redhat.com>

[ Upstream commit 80d875cfc9d3711a029f234ef7d680db79e8fa4b ]

In ipgre_xmit(), skb_pull() may fail even if pskb_inet_may_pull() returns
true. For example, applications can use PF_PACKET to create a malformed
packet with no IP header. This type of packet causes a problem such as
uninit-value access.

This patch ensures that skb_pull() can pull the required size by checking
the skb with pskb_network_may_pull() before skb_pull().

Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Suman Ghosh <sumang@marvell.com>
Link: https://lore.kernel.org/r/20231202161441.221135-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/ip_gre.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index 5b8242265617d..d67d026d7f975 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -634,15 +634,18 @@ static netdev_tx_t ipgre_xmit(struct sk_buff *skb,
 	}
 
 	if (dev->header_ops) {
+		int pull_len = tunnel->hlen + sizeof(struct iphdr);
+
 		if (skb_cow_head(skb, 0))
 			goto free_skb;
 
 		tnl_params = (const struct iphdr *)skb->data;
 
-		/* Pull skb since ip_tunnel_xmit() needs skb->data pointing
-		 * to gre header.
-		 */
-		skb_pull(skb, tunnel->hlen + sizeof(struct iphdr));
+		if (!pskb_network_may_pull(skb, pull_len))
+			goto free_skb;
+
+		/* ip_tunnel_xmit() needs skb->data pointing to gre header. */
+		skb_pull(skb, pull_len);
 		skb_reset_mac_header(skb);
 
 		if (skb->ip_summed == CHECKSUM_PARTIAL &&
-- 
2.42.0

[PATCH 6.1 044/194] net: atlantic: Fix NULL dereference of skb pointer in

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniil Maximov <daniil31415it@gmail.com>

[ Upstream commit cbe860be36095e68e4e5561ab43610982fb429fd ]

If is_ptp_ring == true in the loop of __aq_ring_xdp_clean function,
then a timestamp is stored from a packet in a field of skb object,
which is not allocated at the moment of the call (skb == NULL).

Generalize aq_ptp_extract_ts and other affected functions so they don't
work with struct sk_buff*, but with struct skb_shared_hwtstamps*.

Found by Linux Verification Center (linuxtesting.org) with SVACE

Fixes: 26efaef759a1 ("net: atlantic: Implement xdp data plane")
Signed-off-by: Daniil Maximov <daniil31415it@gmail.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Link: https://lore.kernel.org/r/20231204085810.1681386-1-daniil31415it@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/aquantia/atlantic/aq_ptp.c    | 10 +++++-----
 .../net/ethernet/aquantia/atlantic/aq_ptp.h    |  4 ++--
 .../net/ethernet/aquantia/atlantic/aq_ring.c   | 18 ++++++++++++------
 3 files changed, 19 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ptp.c b/drivers/net/ethernet/aquantia/atlantic/aq_ptp.c
index 80b44043e6c53..28c9b6f1a54f1 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_ptp.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_ptp.c
@@ -553,17 +553,17 @@ void aq_ptp_tx_hwtstamp(struct aq_nic_s *aq_nic, u64 timestamp)
 
 /* aq_ptp_rx_hwtstamp - utility function which checks for RX time stamp
  * @adapter: pointer to adapter struct
- * @skb: particular skb to send timestamp with
+ * @shhwtstamps: particular skb_shared_hwtstamps to save timestamp
  *
  * if the timestamp is valid, we convert it into the timecounter ns
  * value, then store that result into the hwtstamps structure which
  * is passed up the network stack
  */
-static void aq_ptp_rx_hwtstamp(struct aq_ptp_s *aq_ptp, struct sk_buff *skb,
+static void aq_ptp_rx_hwtstamp(struct aq_ptp_s *aq_ptp, struct skb_shared_hwtstamps *shhwtstamps,
 			       u64 timestamp)
 {
 	timestamp -= atomic_read(&aq_ptp->offset_ingress);
-	aq_ptp_convert_to_hwtstamp(aq_ptp, skb_hwtstamps(skb), timestamp);
+	aq_ptp_convert_to_hwtstamp(aq_ptp, shhwtstamps, timestamp);
 }
 
 void aq_ptp_hwtstamp_config_get(struct aq_ptp_s *aq_ptp,
@@ -639,7 +639,7 @@ bool aq_ptp_ring(struct aq_nic_s *aq_nic, struct aq_ring_s *ring)
 	       &aq_ptp->ptp_rx == ring || &aq_ptp->hwts_rx == ring;
 }
 
-u16 aq_ptp_extract_ts(struct aq_nic_s *aq_nic, struct sk_buff *skb, u8 *p,
+u16 aq_ptp_extract_ts(struct aq_nic_s *aq_nic, struct skb_shared_hwtstamps *shhwtstamps, u8 *p,
 		      unsigned int len)
 {
 	struct aq_ptp_s *aq_ptp = aq_nic->aq_ptp;
@@ -648,7 +648,7 @@ u16 aq_ptp_extract_ts(struct aq_nic_s *aq_nic, struct sk_buff *skb, u8 *p,
 						   p, len, &timestamp);
 
 	if (ret > 0)
-		aq_ptp_rx_hwtstamp(aq_ptp, skb, timestamp);
+		aq_ptp_rx_hwtstamp(aq_ptp, shhwtstamps, timestamp);
 
 	return ret;
 }
diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ptp.h b/drivers/net/ethernet/aquantia/atlantic/aq_ptp.h
index 28ccb7ca2df9e..210b723f22072 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_ptp.h
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_ptp.h
@@ -67,7 +67,7 @@ int aq_ptp_hwtstamp_config_set(struct aq_ptp_s *aq_ptp,
 /* Return either ring is belong to PTP or not*/
 bool aq_ptp_ring(struct aq_nic_s *aq_nic, struct aq_ring_s *ring);
 
-u16 aq_ptp_extract_ts(struct aq_nic_s *aq_nic, struct sk_buff *skb, u8 *p,
+u16 aq_ptp_extract_ts(struct aq_nic_s *aq_nic, struct skb_shared_hwtstamps *shhwtstamps, u8 *p,
 		      unsigned int len);
 
 struct ptp_clock *aq_ptp_get_ptp_clock(struct aq_ptp_s *aq_ptp);
@@ -143,7 +143,7 @@ static inline bool aq_ptp_ring(struct aq_nic_s *aq_nic, struct aq_ring_s *ring)
 }
 
 static inline u16 aq_ptp_extract_ts(struct aq_nic_s *aq_nic,
-				    struct sk_buff *skb, u8 *p,
+				    struct skb_shared_hwtstamps *shhwtstamps, u8 *p,
 				    unsigned int len)
 {
 	return 0;
diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c
index 2dc8d215a5918..b5a49166fa972 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c
@@ -647,7 +647,7 @@ static int __aq_ring_rx_clean(struct aq_ring_s *self, struct napi_struct *napi,
 		}
 		if (is_ptp_ring)
 			buff->len -=
-				aq_ptp_extract_ts(self->aq_nic, skb,
+				aq_ptp_extract_ts(self->aq_nic, skb_hwtstamps(skb),
 						  aq_buf_vaddr(&buff->rxdata),
 						  buff->len);
 
@@ -742,6 +742,8 @@ static int __aq_ring_xdp_clean(struct aq_ring_s *rx_ring,
 		struct aq_ring_buff_s *buff = &rx_ring->buff_ring[rx_ring->sw_head];
 		bool is_ptp_ring = aq_ptp_ring(rx_ring->aq_nic, rx_ring);
 		struct aq_ring_buff_s *buff_ = NULL;
+		u16 ptp_hwtstamp_len = 0;
+		struct skb_shared_hwtstamps shhwtstamps;
 		struct sk_buff *skb = NULL;
 		unsigned int next_ = 0U;
 		struct xdp_buff xdp;
@@ -810,11 +812,12 @@ static int __aq_ring_xdp_clean(struct aq_ring_s *rx_ring,
 		hard_start = page_address(buff->rxdata.page) +
 			     buff->rxdata.pg_off - rx_ring->page_offset;
 
-		if (is_ptp_ring)
-			buff->len -=
-				aq_ptp_extract_ts(rx_ring->aq_nic, skb,
-						  aq_buf_vaddr(&buff->rxdata),
-						  buff->len);
+		if (is_ptp_ring) {
+			ptp_hwtstamp_len = aq_ptp_extract_ts(rx_ring->aq_nic, &shhwtstamps,
+							     aq_buf_vaddr(&buff->rxdata),
+							     buff->len);
+			buff->len -= ptp_hwtstamp_len;
+		}
 
 		xdp_init_buff(&xdp, frame_sz, &rx_ring->xdp_rxq);
 		xdp_prepare_buff(&xdp, hard_start, rx_ring->page_offset,
@@ -834,6 +837,9 @@ static int __aq_ring_xdp_clean(struct aq_ring_s *rx_ring,
 		if (IS_ERR(skb) || !skb)
 			continue;
 
+		if (ptp_hwtstamp_len > 0)
+			*skb_hwtstamps(skb) = shhwtstamps;
+
 		if (buff->is_vlan)
 			__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
 					       buff->vlan_rx_tag);
-- 
2.42.0

[PATCH 6.1 045/194] net: hns: fix wrong head when modify the tx feature when sending packets

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit 84757d0839451b20b11e993128f0a77393ca50c1 ]

Upon changing the tx feature, the hns driver will modify the
maybe_stop_tx() and fill_desc() functions, if the modify happens
during packet sending, will cause the hardware and software
pointers do not match, and the port can not work anymore.

This patch deletes the maybe_stop_tx() and fill_desc() functions
modification when setting tx feature, and use the skb_is_gro()
to determine which functions to use in the tx path.

Fixes: 38f616da1c28 ("net:hns: Add support of ethtool TSO set option for Hip06 in HNS")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_enet.c | 53 +++++++++++--------
 drivers/net/ethernet/hisilicon/hns/hns_enet.h |  3 +-
 2 files changed, 33 insertions(+), 23 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
index 7cf10d1e2b311..85722afe21770 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
@@ -142,7 +142,8 @@ MODULE_DEVICE_TABLE(acpi, hns_enet_acpi_match);
 
 static void fill_desc(struct hnae_ring *ring, void *priv,
 		      int size, dma_addr_t dma, int frag_end,
-		      int buf_num, enum hns_desc_type type, int mtu)
+		      int buf_num, enum hns_desc_type type, int mtu,
+		      bool is_gso)
 {
 	struct hnae_desc *desc = &ring->desc[ring->next_to_use];
 	struct hnae_desc_cb *desc_cb = &ring->desc_cb[ring->next_to_use];
@@ -275,6 +276,15 @@ static int hns_nic_maybe_stop_tso(
 	return 0;
 }
 
+static int hns_nic_maybe_stop_tx_v2(struct sk_buff **out_skb, int *bnum,
+				    struct hnae_ring *ring)
+{
+	if (skb_is_gso(*out_skb))
+		return hns_nic_maybe_stop_tso(out_skb, bnum, ring);
+	else
+		return hns_nic_maybe_stop_tx(out_skb, bnum, ring);
+}
+
 static void fill_tso_desc(struct hnae_ring *ring, void *priv,
 			  int size, dma_addr_t dma, int frag_end,
 			  int buf_num, enum hns_desc_type type, int mtu)
@@ -300,6 +310,19 @@ static void fill_tso_desc(struct hnae_ring *ring, void *priv,
 				mtu);
 }
 
+static void fill_desc_v2(struct hnae_ring *ring, void *priv,
+			 int size, dma_addr_t dma, int frag_end,
+			 int buf_num, enum hns_desc_type type, int mtu,
+			 bool is_gso)
+{
+	if (is_gso)
+		fill_tso_desc(ring, priv, size, dma, frag_end, buf_num, type,
+			      mtu);
+	else
+		fill_v2_desc(ring, priv, size, dma, frag_end, buf_num, type,
+			     mtu);
+}
+
 netdev_tx_t hns_nic_net_xmit_hw(struct net_device *ndev,
 				struct sk_buff *skb,
 				struct hns_nic_ring_data *ring_data)
@@ -313,6 +336,7 @@ netdev_tx_t hns_nic_net_xmit_hw(struct net_device *ndev,
 	int seg_num;
 	dma_addr_t dma;
 	int size, next_to_use;
+	bool is_gso;
 	int i;
 
 	switch (priv->ops.maybe_stop_tx(&skb, &buf_num, ring)) {
@@ -339,8 +363,9 @@ netdev_tx_t hns_nic_net_xmit_hw(struct net_device *ndev,
 		ring->stats.sw_err_cnt++;
 		goto out_err_tx_ok;
 	}
+	is_gso = skb_is_gso(skb);
 	priv->ops.fill_desc(ring, skb, size, dma, seg_num == 1 ? 1 : 0,
-			    buf_num, DESC_TYPE_SKB, ndev->mtu);
+			    buf_num, DESC_TYPE_SKB, ndev->mtu, is_gso);
 
 	/* fill the fragments */
 	for (i = 1; i < seg_num; i++) {
@@ -354,7 +379,7 @@ netdev_tx_t hns_nic_net_xmit_hw(struct net_device *ndev,
 		}
 		priv->ops.fill_desc(ring, skb_frag_page(frag), size, dma,
 				    seg_num - 1 == i ? 1 : 0, buf_num,
-				    DESC_TYPE_PAGE, ndev->mtu);
+				    DESC_TYPE_PAGE, ndev->mtu, is_gso);
 	}
 
 	/*complete translate all packets*/
@@ -1776,15 +1801,6 @@ static int hns_nic_set_features(struct net_device *netdev,
 			netdev_info(netdev, "enet v1 do not support tso!\n");
 		break;
 	default:
-		if (features & (NETIF_F_TSO | NETIF_F_TSO6)) {
-			priv->ops.fill_desc = fill_tso_desc;
-			priv->ops.maybe_stop_tx = hns_nic_maybe_stop_tso;
-			/* The chip only support 7*4096 */
-			netif_set_tso_max_size(netdev, 7 * 4096);
-		} else {
-			priv->ops.fill_desc = fill_v2_desc;
-			priv->ops.maybe_stop_tx = hns_nic_maybe_stop_tx;
-		}
 		break;
 	}
 	netdev->features = features;
@@ -2159,16 +2175,9 @@ static void hns_nic_set_priv_ops(struct net_device *netdev)
 		priv->ops.maybe_stop_tx = hns_nic_maybe_stop_tx;
 	} else {
 		priv->ops.get_rxd_bnum = get_v2rx_desc_bnum;
-		if ((netdev->features & NETIF_F_TSO) ||
-		    (netdev->features & NETIF_F_TSO6)) {
-			priv->ops.fill_desc = fill_tso_desc;
-			priv->ops.maybe_stop_tx = hns_nic_maybe_stop_tso;
-			/* This chip only support 7*4096 */
-			netif_set_tso_max_size(netdev, 7 * 4096);
-		} else {
-			priv->ops.fill_desc = fill_v2_desc;
-			priv->ops.maybe_stop_tx = hns_nic_maybe_stop_tx;
-		}
+		priv->ops.fill_desc = fill_desc_v2;
+		priv->ops.maybe_stop_tx = hns_nic_maybe_stop_tx_v2;
+		netif_set_tso_max_size(netdev, 7 * 4096);
 		/* enable tso when init
 		 * control tso on/off through TSE bit in bd
 		 */
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.h b/drivers/net/ethernet/hisilicon/hns/hns_enet.h
index ffa9d6573f54b..3f3ee032f631c 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_enet.h
+++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.h
@@ -44,7 +44,8 @@ struct hns_nic_ring_data {
 struct hns_nic_ops {
 	void (*fill_desc)(struct hnae_ring *ring, void *priv,
 			  int size, dma_addr_t dma, int frag_end,
-			  int buf_num, enum hns_desc_type type, int mtu);
+			  int buf_num, enum hns_desc_type type, int mtu,
+			  bool is_gso);
 	int (*maybe_stop_tx)(struct sk_buff **out_skb,
 			     int *bnum, struct hnae_ring *ring);
 	void (*get_rxd_bnum)(u32 bnum_flag, int *out_bnum);
-- 
2.42.0

[PATCH 6.1 046/194] net: hns: fix fake link up on xge port

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit f708aba40f9c1eeb9c7e93ed4863b5f85b09b288 ]

If a xge port just connect with an optical module and no fiber,
it may have a fake link up because there may be interference on
the hardware. This patch adds an anti-shake to avoid the problem.
And the time of anti-shake is base on tests.

Fixes: b917078c1c10 ("net: hns: Add ACPI support to check SFP present")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/hisilicon/hns/hns_dsaf_mac.c | 29 +++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
index 928d934cb21a5..f75668c479351 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
@@ -66,6 +66,27 @@ static enum mac_mode hns_get_enet_interface(const struct hns_mac_cb *mac_cb)
 	}
 }
 
+static u32 hns_mac_link_anti_shake(struct mac_driver *mac_ctrl_drv)
+{
+#define HNS_MAC_LINK_WAIT_TIME 5
+#define HNS_MAC_LINK_WAIT_CNT 40
+
+	u32 link_status = 0;
+	int i;
+
+	if (!mac_ctrl_drv->get_link_status)
+		return link_status;
+
+	for (i = 0; i < HNS_MAC_LINK_WAIT_CNT; i++) {
+		msleep(HNS_MAC_LINK_WAIT_TIME);
+		mac_ctrl_drv->get_link_status(mac_ctrl_drv, &link_status);
+		if (!link_status)
+			break;
+	}
+
+	return link_status;
+}
+
 void hns_mac_get_link_status(struct hns_mac_cb *mac_cb, u32 *link_status)
 {
 	struct mac_driver *mac_ctrl_drv;
@@ -83,6 +104,14 @@ void hns_mac_get_link_status(struct hns_mac_cb *mac_cb, u32 *link_status)
 							       &sfp_prsnt);
 		if (!ret)
 			*link_status = *link_status && sfp_prsnt;
+
+		/* for FIBER port, it may have a fake link up.
+		 * when the link status changes from down to up, we need to do
+		 * anti-shake. the anti-shake time is base on tests.
+		 * only FIBER port need to do this.
+		 */
+		if (*link_status && !mac_cb->link)
+			*link_status = hns_mac_link_anti_shake(mac_ctrl_drv);
 	}
 
 	mac_cb->link = *link_status;
-- 
2.42.0

[PATCH 6.1 047/194] octeontx2-af: Adjust Tx credits when MCS external bypass is disabled

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nithin Dabilpuram <ndabilpuram@marvell.com>

[ Upstream commit dca6fa8644b89f54345e55501b1419316ba5cb29 ]

When MCS external bypass is disabled, MCS returns additional
2 credits(32B) for every packet Tx'ed on LMAC. To account for
these extra credits, NIX_AF_TX_LINKX_NORM_CREDIT.CC_MCS_CNT
needs to be configured as otherwise NIX Tx credits would overflow
and will never be returned to idle state credit count
causing issues with credit control and MTU change.

This patch fixes the same by configuring CC_MCS_CNT at probe
time for MCS enabled SoC's

Fixes: bd69476e86fc ("octeontx2-af: cn10k: mcs: Install a default TCAM for normal traffic")
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/octeontx2/af/mcs.c    | 14 +++++++++++++-
 drivers/net/ethernet/marvell/octeontx2/af/mcs.h    |  2 ++
 drivers/net/ethernet/marvell/octeontx2/af/rvu.h    |  1 +
 .../net/ethernet/marvell/octeontx2/af/rvu_nix.c    |  8 ++++++++
 .../net/ethernet/marvell/octeontx2/af/rvu_reg.h    |  1 +
 5 files changed, 25 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mcs.c b/drivers/net/ethernet/marvell/octeontx2/af/mcs.c
index c43f19dfbd744..bd87507cf8eaa 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/mcs.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/mcs.c
@@ -1219,6 +1219,17 @@ struct mcs *mcs_get_pdata(int mcs_id)
 	return NULL;
 }
 
+bool is_mcs_bypass(int mcs_id)
+{
+	struct mcs *mcs_dev;
+
+	list_for_each_entry(mcs_dev, &mcs_list, mcs_list) {
+		if (mcs_dev->mcs_id == mcs_id)
+			return mcs_dev->bypass;
+	}
+	return true;
+}
+
 void mcs_set_port_cfg(struct mcs *mcs, struct mcs_port_cfg_set_req *req)
 {
 	u64 val = 0;
@@ -1436,7 +1447,7 @@ static int mcs_x2p_calibration(struct mcs *mcs)
 	return err;
 }
 
-static void mcs_set_external_bypass(struct mcs *mcs, u8 bypass)
+static void mcs_set_external_bypass(struct mcs *mcs, bool bypass)
 {
 	u64 val;
 
@@ -1447,6 +1458,7 @@ static void mcs_set_external_bypass(struct mcs *mcs, u8 bypass)
 	else
 		val &= ~BIT_ULL(6);
 	mcs_reg_write(mcs, MCSX_MIL_GLOBAL, val);
+	mcs->bypass = bypass;
 }
 
 static void mcs_global_cfg(struct mcs *mcs)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mcs.h b/drivers/net/ethernet/marvell/octeontx2/af/mcs.h
index 0f89dcb764654..f927cc61dfd21 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/mcs.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/mcs.h
@@ -149,6 +149,7 @@ struct mcs {
 	u16			num_vec;
 	void			*rvu;
 	u16			*tx_sa_active;
+	bool                      bypass;
 };
 
 struct mcs_ops {
@@ -206,6 +207,7 @@ void mcs_get_custom_tag_cfg(struct mcs *mcs, struct mcs_custom_tag_cfg_get_req *
 int mcs_alloc_ctrlpktrule(struct rsrc_bmap *rsrc, u16 *pf_map, u16 offset, u16 pcifunc);
 int mcs_free_ctrlpktrule(struct mcs *mcs, struct mcs_free_ctrl_pkt_rule_req *req);
 int mcs_ctrlpktrule_write(struct mcs *mcs, struct mcs_ctrl_pkt_rule_write_req *req);
+bool is_mcs_bypass(int mcs_id);
 
 /* CN10K-B APIs */
 void cn10kb_mcs_set_hw_capabilities(struct mcs *mcs);
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
index a3346ea7876c5..95a7bc396e8ea 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
@@ -325,6 +325,7 @@ struct nix_hw {
 	struct nix_txvlan txvlan;
 	struct nix_ipolicer *ipolicer;
 	u64    *tx_credits;
+	u8	cc_mcs_cnt;
 };
 
 /* RVU block's capabilities or functionality,
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
index 7310047136986..959f36efdc4a6 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
@@ -12,6 +12,7 @@
 #include "rvu_reg.h"
 #include "rvu.h"
 #include "npc.h"
+#include "mcs.h"
 #include "cgx.h"
 #include "lmac_common.h"
 #include "rvu_npc_hash.h"
@@ -4164,6 +4165,12 @@ static void nix_link_config(struct rvu *rvu, int blkaddr,
 			    SDP_HW_MAX_FRS << 16 | NIC_HW_MIN_FRS);
 	}
 
+	/* Get MCS external bypass status for CN10K-B */
+	if (mcs_get_blkcnt() == 1) {
+		/* Adjust for 2 credits when external bypass is disabled */
+		nix_hw->cc_mcs_cnt = is_mcs_bypass(0) ? 0 : 2;
+	}
+
 	/* Set credits for Tx links assuming max packet length allowed.
 	 * This will be reconfigured based on MTU set for PF/VF.
 	 */
@@ -4187,6 +4194,7 @@ static void nix_link_config(struct rvu *rvu, int blkaddr,
 			tx_credits = (lmac_fifo_len - lmac_max_frs) / 16;
 			/* Enable credits and set credit pkt count to max allowed */
 			cfg =  (tx_credits << 12) | (0x1FF << 2) | BIT_ULL(1);
+			cfg |= FIELD_PREP(NIX_AF_LINKX_MCS_CNT_MASK, nix_hw->cc_mcs_cnt);
 
 			link = iter + slink;
 			nix_hw->tx_credits[link] = tx_credits;
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h
index 39f7a7cb27558..b690e5566f12a 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h
@@ -434,6 +434,7 @@
 
 #define NIX_AF_LINKX_BASE_MASK		GENMASK_ULL(11, 0)
 #define NIX_AF_LINKX_RANGE_MASK		GENMASK_ULL(19, 16)
+#define NIX_AF_LINKX_MCS_CNT_MASK	GENMASK_ULL(33, 32)
 
 /* SSO */
 #define SSO_AF_CONST			(0x1000)
-- 
2.42.0

[PATCH 6.1 048/194] octeontx2-af: Fix mcs sa cam entries size

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Geetha sowjanya <gakula@marvell.com>

[ Upstream commit 9723b2cca1f0e980c53156b52ea73b93966b3c8a ]

On latest silicon versions SA cam entries increased to 256.
This patch fixes the datatype of sa_entries in mcs_hw_info
struct to u16 to hold 256 entries.

Fixes: 080bbd19c9dd ("octeontx2-af: cn10k: mcs: Add mailboxes for port related operations")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/octeontx2/af/mbox.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
index a0c31f5b2ce05..03ebabd616353 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
@@ -1877,7 +1877,7 @@ struct mcs_hw_info {
 	u8 tcam_entries;	/* RX/TX Tcam entries per mcs block */
 	u8 secy_entries;	/* RX/TX SECY entries per mcs block */
 	u8 sc_entries;		/* RX/TX SC CAM entries per mcs block */
-	u8 sa_entries;		/* PN table entries = SA entries */
+	u16 sa_entries;		/* PN table entries = SA entries */
 	u64 rsvd[16];
 };
 
-- 
2.42.0

[PATCH 6.1 049/194] octeontx2-af: Fix mcs stats register address

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Geetha sowjanya <gakula@marvell.com>

[ Upstream commit 3ba98a8c6f8ceb4e01a78f973d8d9017020bbd57 ]

This patch adds the miss mcs stats register
for mcs supported platforms.

Fixes: 9312150af8da ("octeontx2-af: cn10k: mcs: Support for stats collection")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/marvell/octeontx2/af/mcs.c   |  4 +--
 .../ethernet/marvell/octeontx2/af/mcs_reg.h   | 31 ++++++++++++++++---
 2 files changed, 29 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mcs.c b/drivers/net/ethernet/marvell/octeontx2/af/mcs.c
index bd87507cf8eaa..c1775bd01c2b4 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/mcs.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/mcs.c
@@ -117,7 +117,7 @@ void mcs_get_rx_secy_stats(struct mcs *mcs, struct mcs_secy_stats *stats, int id
 	reg = MCSX_CSE_RX_MEM_SLAVE_INPKTSSECYTAGGEDCTLX(id);
 	stats->pkt_tagged_ctl_cnt = mcs_reg_read(mcs, reg);
 
-	reg = MCSX_CSE_RX_MEM_SLAVE_INPKTSSECYUNTAGGEDORNOTAGX(id);
+	reg = MCSX_CSE_RX_MEM_SLAVE_INPKTSSECYUNTAGGEDX(id);
 	stats->pkt_untaged_cnt = mcs_reg_read(mcs, reg);
 
 	reg = MCSX_CSE_RX_MEM_SLAVE_INPKTSSECYCTLX(id);
@@ -215,7 +215,7 @@ void mcs_get_sc_stats(struct mcs *mcs, struct mcs_sc_stats *stats,
 		reg = MCSX_CSE_RX_MEM_SLAVE_INPKTSSCNOTVALIDX(id);
 		stats->pkt_notvalid_cnt = mcs_reg_read(mcs, reg);
 
-		reg = MCSX_CSE_RX_MEM_SLAVE_INPKTSSCUNCHECKEDOROKX(id);
+		reg = MCSX_CSE_RX_MEM_SLAVE_INPKTSSCUNCHECKEDX(id);
 		stats->pkt_unchecked_cnt = mcs_reg_read(mcs, reg);
 
 		if (mcs->hw->mcs_blks > 1) {
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mcs_reg.h b/drivers/net/ethernet/marvell/octeontx2/af/mcs_reg.h
index f3ab01fc363c8..f4c6de89002c1 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/mcs_reg.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/mcs_reg.h
@@ -810,14 +810,37 @@
 		offset = 0x9d8ull;			\
 	offset; })
 
+#define MCSX_CSE_RX_MEM_SLAVE_INPKTSSCUNCHECKEDX(a) ({	\
+	u64 offset;					\
+							\
+	offset = 0xee80ull;				\
+	if (mcs->hw->mcs_blks > 1)			\
+		offset = 0xe818ull;			\
+	offset += (a) * 0x8ull;				\
+	offset; })
+
+#define MCSX_CSE_RX_MEM_SLAVE_INPKTSSECYUNTAGGEDX(a) ({	\
+	u64 offset;					\
+							\
+	offset = 0xa680ull;				\
+	if (mcs->hw->mcs_blks > 1)			\
+		offset = 0xd018ull;			\
+	offset += (a) * 0x8ull;				\
+	offset; })
+
+#define MCSX_CSE_RX_MEM_SLAVE_INPKTSSCLATEORDELAYEDX(a)	({	\
+	u64 offset;						\
+								\
+	offset = 0xf680ull;					\
+	if (mcs->hw->mcs_blks > 1)				\
+		offset = 0xe018ull;				\
+	offset += (a) * 0x8ull;					\
+	offset; })
+
 #define MCSX_CSE_RX_MEM_SLAVE_INOCTETSSCDECRYPTEDX(a)	(0xe680ull + (a) * 0x8ull)
 #define MCSX_CSE_RX_MEM_SLAVE_INOCTETSSCVALIDATEX(a)	(0xde80ull + (a) * 0x8ull)
-#define MCSX_CSE_RX_MEM_SLAVE_INPKTSSECYUNTAGGEDORNOTAGX(a)	(0xa680ull + (a) * 0x8ull)
 #define MCSX_CSE_RX_MEM_SLAVE_INPKTSSECYNOTAGX(a)	(0xd218 + (a) * 0x8ull)
-#define MCSX_CSE_RX_MEM_SLAVE_INPKTSSECYUNTAGGEDX(a)	(0xd018ull + (a) * 0x8ull)
-#define MCSX_CSE_RX_MEM_SLAVE_INPKTSSCUNCHECKEDOROKX(a)	(0xee80ull + (a) * 0x8ull)
 #define MCSX_CSE_RX_MEM_SLAVE_INPKTSSECYCTLX(a)		(0xb680ull + (a) * 0x8ull)
-#define MCSX_CSE_RX_MEM_SLAVE_INPKTSSCLATEORDELAYEDX(a) (0xf680ull + (a) * 0x8ull)
 #define MCSX_CSE_RX_MEM_SLAVE_INPKTSSAINVALIDX(a)	(0x12680ull + (a) * 0x8ull)
 #define MCSX_CSE_RX_MEM_SLAVE_INPKTSSANOTUSINGSAERRORX(a) (0x15680ull + (a) * 0x8ull)
 #define MCSX_CSE_RX_MEM_SLAVE_INPKTSSANOTVALIDX(a)	(0x13680ull + (a) * 0x8ull)
-- 
2.42.0

[PATCH 6.1 050/194] octeontx2-af: Add missing mcs flr handler call

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Geetha sowjanya <gakula@marvell.com>

[ Upstream commit d431abd0a9aa27be379fb5f8304062071b0f5a7e ]

If mcs resources are attached to PF/VF. These resources need
to be freed on FLR. This patch add missing mcs flr call on PF FLR.

Fixes: bd69476e86fc ("octeontx2-af: cn10k: mcs: Install a default TCAM for normal traffic")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/octeontx2/af/rvu.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
index 733add3a9dc6b..d88d86bf07b03 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
@@ -2622,6 +2622,9 @@ static void __rvu_flr_handler(struct rvu *rvu, u16 pcifunc)
 	 */
 	rvu_npc_free_mcam_entries(rvu, pcifunc, -1);
 
+	if (rvu->mcs_blk_cnt)
+		rvu_mcs_flr_handler(rvu, pcifunc);
+
 	mutex_unlock(&rvu->flr_lock);
 }
 
-- 
2.42.0

[PATCH 6.1 051/194] octeontx2-af: Update Tx link register range

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rahul Bhansali <rbhansali@marvell.com>

[ Upstream commit 7336fc196748f82646b630d5a2e9d283e200b988 ]

On new silicons the TX channels for transmit level has increased.
This patch fixes the respective register offset range to
configure the newly added channels.

Fixes: b279bbb3314e ("octeontx2-af: NIX Tx scheduler queue config support")
Signed-off-by: Rahul Bhansali <rbhansali@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.c
index b3150f0532919..d46ac29adb966 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.c
@@ -31,8 +31,8 @@ static struct hw_reg_map txsch_reg_map[NIX_TXSCH_LVL_CNT] = {
 	{NIX_TXSCH_LVL_TL4, 3, 0xFFFF, {{0x0B00, 0x0B08}, {0x0B10, 0x0B18},
 			      {0x1200, 0x12E0} } },
 	{NIX_TXSCH_LVL_TL3, 4, 0xFFFF, {{0x1000, 0x10E0}, {0x1600, 0x1608},
-			      {0x1610, 0x1618}, {0x1700, 0x17B0} } },
-	{NIX_TXSCH_LVL_TL2, 2, 0xFFFF, {{0x0E00, 0x0EE0}, {0x1700, 0x17B0} } },
+			      {0x1610, 0x1618}, {0x1700, 0x17C8} } },
+	{NIX_TXSCH_LVL_TL2, 2, 0xFFFF, {{0x0E00, 0x0EE0}, {0x1700, 0x17C8} } },
 	{NIX_TXSCH_LVL_TL1, 1, 0xFFFF, {{0x0C00, 0x0D98} } },
 };
 
-- 
2.42.0

[PATCH 6.1 052/194] dt-bindings: interrupt-controller: Allow #power-domain-cells

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konrad Dybcio <konrad.dybcio@linaro.org>

[ Upstream commit c0a2755aced969e0125fd68ccd95269b28d8913a ]

MPM provides a single genpd. Allow #power-domain-cells = <0>.

Fixes: 54fc9851c0e0 ("dt-bindings: interrupt-controller: Add Qualcomm MPM support")
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231129-topic-mpmbindingspd-v2-1-acbe909ceee1@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../devicetree/bindings/interrupt-controller/qcom,mpm.yaml    | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
index 509d20c091af8..6a206111d4e0f 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
@@ -62,6 +62,9 @@ properties:
         - description: MPM pin number
         - description: GIC SPI number for the MPM pin
 
+  '#power-domain-cells':
+    const: 0
+
 required:
   - compatible
   - reg
@@ -93,4 +96,5 @@ examples:
                            <86 183>,
                            <90 260>,
                            <91 260>;
+        #power-domain-cells = <0>;
     };
-- 
2.42.0

[PATCH 6.1 053/194] netfilter: nft_exthdr: add boolean DCCP option matching

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeremy Sowden <jeremy@azazel.net>

[ Upstream commit b9f9a485fb0eb80b0e2b90410b28cbb9b0e85687 ]

The xt_dccp iptables module supports the matching of DCCP packets based
on the presence or absence of DCCP options.  Extend nft_exthdr to add
this functionality to nftables.

Link: https://bugzilla.netfilter.org/show_bug.cgi?id=930
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Stable-dep-of: 63331e37fb22 ("netfilter: nf_tables: fix 'exist' matching on bigendian arches")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/uapi/linux/netfilter/nf_tables.h |   2 +
 net/netfilter/nft_exthdr.c               | 106 +++++++++++++++++++++++
 2 files changed, 108 insertions(+)

diff --git a/include/uapi/linux/netfilter/nf_tables.h b/include/uapi/linux/netfilter/nf_tables.h
index 466fd3f4447c2..af8f4c304d272 100644
--- a/include/uapi/linux/netfilter/nf_tables.h
+++ b/include/uapi/linux/netfilter/nf_tables.h
@@ -816,12 +816,14 @@ enum nft_exthdr_flags {
  * @NFT_EXTHDR_OP_TCP: match against tcp options
  * @NFT_EXTHDR_OP_IPV4: match against ipv4 options
  * @NFT_EXTHDR_OP_SCTP: match against sctp chunks
+ * @NFT_EXTHDR_OP_DCCP: match against dccp otions
  */
 enum nft_exthdr_op {
 	NFT_EXTHDR_OP_IPV6,
 	NFT_EXTHDR_OP_TCPOPT,
 	NFT_EXTHDR_OP_IPV4,
 	NFT_EXTHDR_OP_SCTP,
+	NFT_EXTHDR_OP_DCCP,
 	__NFT_EXTHDR_OP_MAX
 };
 #define NFT_EXTHDR_OP_MAX	(__NFT_EXTHDR_OP_MAX - 1)
diff --git a/net/netfilter/nft_exthdr.c b/net/netfilter/nft_exthdr.c
index efb50c2b41f32..f96706de1ad05 100644
--- a/net/netfilter/nft_exthdr.c
+++ b/net/netfilter/nft_exthdr.c
@@ -10,6 +10,7 @@
 #include <linux/netlink.h>
 #include <linux/netfilter.h>
 #include <linux/netfilter/nf_tables.h>
+#include <linux/dccp.h>
 #include <linux/sctp.h>
 #include <net/netfilter/nf_tables_core.h>
 #include <net/netfilter/nf_tables.h>
@@ -409,6 +410,82 @@ static void nft_exthdr_sctp_eval(const struct nft_expr *expr,
 		regs->verdict.code = NFT_BREAK;
 }
 
+static void nft_exthdr_dccp_eval(const struct nft_expr *expr,
+				 struct nft_regs *regs,
+				 const struct nft_pktinfo *pkt)
+{
+	struct nft_exthdr *priv = nft_expr_priv(expr);
+	unsigned int thoff, dataoff, optoff, optlen, i;
+	u32 *dest = &regs->data[priv->dreg];
+	const struct dccp_hdr *dh;
+	struct dccp_hdr _dh;
+
+	if (pkt->tprot != IPPROTO_DCCP || pkt->fragoff)
+		goto err;
+
+	thoff = nft_thoff(pkt);
+
+	dh = skb_header_pointer(pkt->skb, thoff, sizeof(_dh), &_dh);
+	if (!dh)
+		goto err;
+
+	dataoff = dh->dccph_doff * sizeof(u32);
+	optoff = __dccp_hdr_len(dh);
+	if (dataoff <= optoff)
+		goto err;
+
+	optlen = dataoff - optoff;
+
+	for (i = 0; i < optlen; ) {
+		/* Options 0 (DCCPO_PADDING) - 31 (DCCPO_MAX_RESERVED) are 1B in
+		 * the length; the remaining options are at least 2B long.  In
+		 * all cases, the first byte contains the option type.  In
+		 * multi-byte options, the second byte contains the option
+		 * length, which must be at least two: 1 for the type plus 1 for
+		 * the length plus 0-253 for any following option data.  We
+		 * aren't interested in the option data, only the type and the
+		 * length, so we don't need to read more than two bytes at a
+		 * time.
+		 */
+		unsigned int buflen = optlen - i;
+		u8 buf[2], *bufp;
+		u8 type, len;
+
+		if (buflen > sizeof(buf))
+			buflen = sizeof(buf);
+
+		bufp = skb_header_pointer(pkt->skb, thoff + optoff + i, buflen,
+					  &buf);
+		if (!bufp)
+			goto err;
+
+		type = bufp[0];
+
+		if (type == priv->type) {
+			*dest = 1;
+			return;
+		}
+
+		if (type <= DCCPO_MAX_RESERVED) {
+			i++;
+			continue;
+		}
+
+		if (buflen < 2)
+			goto err;
+
+		len = bufp[1];
+
+		if (len < 2)
+			goto err;
+
+		i += len;
+	}
+
+err:
+	*dest = 0;
+}
+
 static const struct nla_policy nft_exthdr_policy[NFTA_EXTHDR_MAX + 1] = {
 	[NFTA_EXTHDR_DREG]		= { .type = NLA_U32 },
 	[NFTA_EXTHDR_TYPE]		= { .type = NLA_U8 },
@@ -560,6 +637,22 @@ static int nft_exthdr_ipv4_init(const struct nft_ctx *ctx,
 	return 0;
 }
 
+static int nft_exthdr_dccp_init(const struct nft_ctx *ctx,
+				const struct nft_expr *expr,
+				const struct nlattr * const tb[])
+{
+	struct nft_exthdr *priv = nft_expr_priv(expr);
+	int err = nft_exthdr_init(ctx, expr, tb);
+
+	if (err < 0)
+		return err;
+
+	if (!(priv->flags & NFT_EXTHDR_F_PRESENT))
+		return -EOPNOTSUPP;
+
+	return 0;
+}
+
 static int nft_exthdr_dump_common(struct sk_buff *skb, const struct nft_exthdr *priv)
 {
 	if (nla_put_u8(skb, NFTA_EXTHDR_TYPE, priv->type))
@@ -686,6 +779,15 @@ static const struct nft_expr_ops nft_exthdr_sctp_ops = {
 	.reduce		= nft_exthdr_reduce,
 };
 
+static const struct nft_expr_ops nft_exthdr_dccp_ops = {
+	.type		= &nft_exthdr_type,
+	.size		= NFT_EXPR_SIZE(sizeof(struct nft_exthdr)),
+	.eval		= nft_exthdr_dccp_eval,
+	.init		= nft_exthdr_dccp_init,
+	.dump		= nft_exthdr_dump,
+	.reduce		= nft_exthdr_reduce,
+};
+
 static const struct nft_expr_ops *
 nft_exthdr_select_ops(const struct nft_ctx *ctx,
 		      const struct nlattr * const tb[])
@@ -720,6 +822,10 @@ nft_exthdr_select_ops(const struct nft_ctx *ctx,
 		if (tb[NFTA_EXTHDR_DREG])
 			return &nft_exthdr_sctp_ops;
 		break;
+	case NFT_EXTHDR_OP_DCCP:
+		if (tb[NFTA_EXTHDR_DREG])
+			return &nft_exthdr_dccp_ops;
+		break;
 	}
 
 	return ERR_PTR(-EOPNOTSUPP);
-- 
2.42.0

[PATCH 6.1 054/194] netfilter: nf_tables: fix exist matching on bigendian arches

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 63331e37fb227e796894b31d713697612c8dee7f ]

Maze reports "tcp option fastopen exists" fails to match on
OpenWrt 22.03.5, r20134-5f15225c1e (5.10.176) router.

"tcp option fastopen exists" translates to:
inet
  [ exthdr load tcpopt 1b @ 34 + 0 present => reg 1 ]
  [ cmp eq reg 1 0x00000001 ]

.. but existing nft userspace generates a 1-byte compare.

On LSB (x86), "*reg32 = 1" is identical to nft_reg_store8(reg32, 1), but
not on MSB, which will place the 1 last. IOW, on bigendian aches the cmp8
is awalys false.

Make sure we store this in a consistent fashion, so existing userspace
will also work on MSB (bigendian).

Regardless of this patch we can also change nft userspace to generate
'reg32 == 0' and 'reg32 != 0' instead of u8 == 0 // u8 == 1 when
adding 'option x missing/exists' expressions as well.

Fixes: 3c1fece8819e ("netfilter: nft_exthdr: Allow checking TCP option presence, too")
Fixes: b9f9a485fb0e ("netfilter: nft_exthdr: add boolean DCCP option matching")
Fixes: 055c4b34b94f ("netfilter: nft_fib: Support existence check")
Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com>
Closes: https://lore.kernel.org/netfilter-devel/CAHo-OozyEqHUjL2-ntATzeZOiuftLWZ_HU6TOM_js4qLfDEAJg@mail.gmail.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_exthdr.c | 4 ++--
 net/netfilter/nft_fib.c    | 8 ++++++--
 2 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/net/netfilter/nft_exthdr.c b/net/netfilter/nft_exthdr.c
index f96706de1ad05..de588f7b69c45 100644
--- a/net/netfilter/nft_exthdr.c
+++ b/net/netfilter/nft_exthdr.c
@@ -215,7 +215,7 @@ static void nft_exthdr_tcp_eval(const struct nft_expr *expr,
 
 		offset = i + priv->offset;
 		if (priv->flags & NFT_EXTHDR_F_PRESENT) {
-			*dest = 1;
+			nft_reg_store8(dest, 1);
 		} else {
 			if (priv->len % NFT_REG32_SIZE)
 				dest[priv->len / NFT_REG32_SIZE] = 0;
@@ -462,7 +462,7 @@ static void nft_exthdr_dccp_eval(const struct nft_expr *expr,
 		type = bufp[0];
 
 		if (type == priv->type) {
-			*dest = 1;
+			nft_reg_store8(dest, 1);
 			return;
 		}
 
diff --git a/net/netfilter/nft_fib.c b/net/netfilter/nft_fib.c
index 1f12d7ade606c..5748415f74d0b 100644
--- a/net/netfilter/nft_fib.c
+++ b/net/netfilter/nft_fib.c
@@ -144,11 +144,15 @@ void nft_fib_store_result(void *reg, const struct nft_fib *priv,
 	switch (priv->result) {
 	case NFT_FIB_RESULT_OIF:
 		index = dev ? dev->ifindex : 0;
-		*dreg = (priv->flags & NFTA_FIB_F_PRESENT) ? !!index : index;
+		if (priv->flags & NFTA_FIB_F_PRESENT)
+			nft_reg_store8(dreg, !!index);
+		else
+			*dreg = index;
+
 		break;
 	case NFT_FIB_RESULT_OIFNAME:
 		if (priv->flags & NFTA_FIB_F_PRESENT)
-			*dreg = !!dev;
+			nft_reg_store8(dreg, !!dev);
 		else
 			strncpy(reg, dev ? dev->name : "", IFNAMSIZ);
 		break;
-- 
2.42.0

[PATCH 6.1 055/194] netfilter: nf_tables: bail out on mismatching dynset and set expressions

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit 3701cd390fd731ee7ae8b8006246c8db82c72bea ]

If dynset expressions provided by userspace is larger than the declared
set expressions, then bail out.

Fixes: 48b0ae046ee9 ("netfilter: nftables: netlink support for several set element expressions")
Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_dynset.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/net/netfilter/nft_dynset.c b/net/netfilter/nft_dynset.c
index cf9a1ae87d9b1..a470e5f612843 100644
--- a/net/netfilter/nft_dynset.c
+++ b/net/netfilter/nft_dynset.c
@@ -279,10 +279,15 @@ static int nft_dynset_init(const struct nft_ctx *ctx,
 			priv->expr_array[i] = dynset_expr;
 			priv->num_exprs++;
 
-			if (set->num_exprs &&
-			    dynset_expr->ops != set->exprs[i]->ops) {
-				err = -EOPNOTSUPP;
-				goto err_expr_free;
+			if (set->num_exprs) {
+				if (i >= set->num_exprs) {
+					err = -EINVAL;
+					goto err_expr_free;
+				}
+				if (dynset_expr->ops != set->exprs[i]->ops) {
+					err = -EOPNOTSUPP;
+					goto err_expr_free;
+				}
 			}
 			i++;
 		}
-- 
2.42.0

[PATCH 6.1 056/194] netfilter: nf_tables: validate family when identifying table via handle

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit f6e1532a2697b81da00bfb184e99d15e01e9d98c ]

Validate table family when looking up for it via NFTA_TABLE_HANDLE.

Fixes: 3ecbfd65f50e ("netfilter: nf_tables: allocate handle and delete objects via handle")
Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_api.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 421211eba838b..05fa5141af516 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -805,7 +805,7 @@ static struct nft_table *nft_table_lookup(const struct net *net,
 
 static struct nft_table *nft_table_lookup_byhandle(const struct net *net,
 						   const struct nlattr *nla,
-						   u8 genmask, u32 nlpid)
+						   int family, u8 genmask, u32 nlpid)
 {
 	struct nftables_pernet *nft_net;
 	struct nft_table *table;
@@ -813,6 +813,7 @@ static struct nft_table *nft_table_lookup_byhandle(const struct net *net,
 	nft_net = nft_pernet(net);
 	list_for_each_entry(table, &nft_net->tables, list) {
 		if (be64_to_cpu(nla_get_be64(nla)) == table->handle &&
+		    table->family == family &&
 		    nft_active_genmask(table, genmask)) {
 			if (nft_table_has_owner(table) &&
 			    nlpid && table->nlpid != nlpid)
@@ -1537,7 +1538,7 @@ static int nf_tables_deltable(struct sk_buff *skb, const struct nfnl_info *info,
 
 	if (nla[NFTA_TABLE_HANDLE]) {
 		attr = nla[NFTA_TABLE_HANDLE];
-		table = nft_table_lookup_byhandle(net, attr, genmask,
+		table = nft_table_lookup_byhandle(net, attr, family, genmask,
 						  NETLINK_CB(skb).portid);
 	} else {
 		attr = nla[NFTA_TABLE_NAME];
-- 
2.42.0

[PATCH 6.1 057/194] netfilter: xt_owner: Fix for unsafe access of sk->sk_socket

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Phil Sutter <phil@nwl.cc>

[ Upstream commit 7ae836a3d630e146b732fe8ef7d86b243748751f ]

A concurrently running sock_orphan() may NULL the sk_socket pointer in
between check and deref. Follow other users (like nft_meta.c for
instance) and acquire sk_callback_lock before dereferencing sk_socket.

Fixes: 0265ab44bacc ("[NETFILTER]: merge ipt_owner/ip6t_owner in xt_owner")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/xt_owner.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/net/netfilter/xt_owner.c b/net/netfilter/xt_owner.c
index e85ce69924aee..50332888c8d23 100644
--- a/net/netfilter/xt_owner.c
+++ b/net/netfilter/xt_owner.c
@@ -76,18 +76,23 @@ owner_mt(const struct sk_buff *skb, struct xt_action_param *par)
 		 */
 		return false;
 
-	filp = sk->sk_socket->file;
-	if (filp == NULL)
+	read_lock_bh(&sk->sk_callback_lock);
+	filp = sk->sk_socket ? sk->sk_socket->file : NULL;
+	if (filp == NULL) {
+		read_unlock_bh(&sk->sk_callback_lock);
 		return ((info->match ^ info->invert) &
 		       (XT_OWNER_UID | XT_OWNER_GID)) == 0;
+	}
 
 	if (info->match & XT_OWNER_UID) {
 		kuid_t uid_min = make_kuid(net->user_ns, info->uid_min);
 		kuid_t uid_max = make_kuid(net->user_ns, info->uid_max);
 		if ((uid_gte(filp->f_cred->fsuid, uid_min) &&
 		     uid_lte(filp->f_cred->fsuid, uid_max)) ^
-		    !(info->invert & XT_OWNER_UID))
+		    !(info->invert & XT_OWNER_UID)) {
+			read_unlock_bh(&sk->sk_callback_lock);
 			return false;
+		}
 	}
 
 	if (info->match & XT_OWNER_GID) {
@@ -112,10 +117,13 @@ owner_mt(const struct sk_buff *skb, struct xt_action_param *par)
 			}
 		}
 
-		if (match ^ !(info->invert & XT_OWNER_GID))
+		if (match ^ !(info->invert & XT_OWNER_GID)) {
+			read_unlock_bh(&sk->sk_callback_lock);
 			return false;
+		}
 	}
 
+	read_unlock_bh(&sk->sk_callback_lock);
 	return true;
 }
 
-- 
2.42.0

[PATCH 6.1 058/194] tcp: do not accept ACK of bytes we never sent

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 3d501dd326fb1c73f1b8206d4c6e1d7b15c07e27 ]

This patch is based on a detailed report and ideas from Yepeng Pan
and Christian Rossow.

ACK seq validation is currently following RFC 5961 5.2 guidelines:

   The ACK value is considered acceptable only if
   it is in the range of ((SND.UNA - MAX.SND.WND) <= SEG.ACK <=
   SND.NXT).  All incoming segments whose ACK value doesn't satisfy the
   above condition MUST be discarded and an ACK sent back.  It needs to
   be noted that RFC 793 on page 72 (fifth check) says: "If the ACK is a
   duplicate (SEG.ACK < SND.UNA), it can be ignored.  If the ACK
   acknowledges something not yet sent (SEG.ACK > SND.NXT) then send an
   ACK, drop the segment, and return".  The "ignored" above implies that
   the processing of the incoming data segment continues, which means
   the ACK value is treated as acceptable.  This mitigation makes the
   ACK check more stringent since any ACK < SND.UNA wouldn't be
   accepted, instead only ACKs that are in the range ((SND.UNA -
   MAX.SND.WND) <= SEG.ACK <= SND.NXT) get through.

This can be refined for new (and possibly spoofed) flows,
by not accepting ACK for bytes that were never sent.

This greatly improves TCP security at a little cost.

I added a Fixes: tag to make sure this patch will reach stable trees,
even if the 'blamed' patch was adhering to the RFC.

tp->bytes_acked was added in linux-4.2

Following packetdrill test (courtesy of Yepeng Pan) shows
the issue at hand:

0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1024) = 0

// ---------------- Handshake ------------------- //

// when window scale is set to 14 the window size can be extended to
// 65535 * (2^14) = 1073725440. Linux would accept an ACK packet
// with ack number in (Server_ISN+1-1073725440. Server_ISN+1)
// ,though this ack number acknowledges some data never
// sent by the server.

+0 < S 0:0(0) win 65535 <mss 1400,nop,wscale 14>
+0 > S. 0:0(0) ack 1 <...>
+0 < . 1:1(0) ack 1 win 65535
+0 accept(3, ..., ...) = 4

// For the established connection, we send an ACK packet,
// the ack packet uses ack number 1 - 1073725300 + 2^32,
// where 2^32 is used to wrap around.
// Note: we used 1073725300 instead of 1073725440 to avoid possible
// edge cases.
// 1 - 1073725300 + 2^32 = 3221241997

// Oops, old kernels happily accept this packet.
+0 < . 1:1001(1000) ack 3221241997 win 65535

// After the kernel fix the following will be replaced by a challenge ACK,
// and prior malicious frame would be dropped.
+0 > . 1:1(0) ack 1001

Fixes: 354e4aa391ed ("tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Yepeng Pan <yepeng.pan@cispa.de>
Reported-by: Christian Rossow <rossow@cispa.de>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20231205161841.2702925-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp_input.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 65dae3d43684f..34460c9b37ae2 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -3803,8 +3803,12 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag)
 	 * then we can probably ignore it.
 	 */
 	if (before(ack, prior_snd_una)) {
+		u32 max_window;
+
+		/* do not accept ACK for bytes we never sent. */
+		max_window = min_t(u64, tp->max_window, tp->bytes_acked);
 		/* RFC 5961 5.2 [Blind Data Injection Attack].[Mitigation] */
-		if (before(ack, prior_snd_una - tp->max_window)) {
+		if (before(ack, prior_snd_una - max_window)) {
 			if (!(flag & FLAG_NO_CHALLENGE_ACK))
 				tcp_send_challenge_ack(sk);
 			return -SKB_DROP_REASON_TCP_TOO_OLD_ACK;
-- 
2.42.0

[PATCH 6.1 059/194] bpf: sockmap, updating the sg structure should also update curr

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Fastabend <john.fastabend@gmail.com>

[ Upstream commit bb9aefde5bbaf6c168c77ba635c155b4980c2287 ]

Curr pointer should be updated when the sg structure is shifted.

Fixes: 7246d8ed4dcce ("bpf: helper to pop data from messages")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20231206232706.374377-3-john.fastabend@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/filter.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/net/core/filter.c b/net/core/filter.c
index adc327f4af1e9..3a6110ea4009f 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -2582,6 +2582,22 @@ BPF_CALL_2(bpf_msg_cork_bytes, struct sk_msg *, msg, u32, bytes)
 	return 0;
 }
 
+static void sk_msg_reset_curr(struct sk_msg *msg)
+{
+	u32 i = msg->sg.start;
+	u32 len = 0;
+
+	do {
+		len += sk_msg_elem(msg, i)->length;
+		sk_msg_iter_var_next(i);
+		if (len >= msg->sg.size)
+			break;
+	} while (i != msg->sg.end);
+
+	msg->sg.curr = i;
+	msg->sg.copybreak = 0;
+}
+
 static const struct bpf_func_proto bpf_msg_cork_bytes_proto = {
 	.func           = bpf_msg_cork_bytes,
 	.gpl_only       = false,
@@ -2701,6 +2717,7 @@ BPF_CALL_4(bpf_msg_pull_data, struct sk_msg *, msg, u32, start,
 		      msg->sg.end - shift + NR_MSG_FRAG_IDS :
 		      msg->sg.end - shift;
 out:
+	sk_msg_reset_curr(msg);
 	msg->data = sg_virt(&msg->sg.data[first_sge]) + start - offset;
 	msg->data_end = msg->data + bytes;
 	return 0;
@@ -2837,6 +2854,7 @@ BPF_CALL_4(bpf_msg_push_data, struct sk_msg *, msg, u32, start,
 		msg->sg.data[new] = rsge;
 	}
 
+	sk_msg_reset_curr(msg);
 	sk_msg_compute_data_pointers(msg);
 	return 0;
 }
@@ -3005,6 +3023,7 @@ BPF_CALL_4(bpf_msg_pop_data, struct sk_msg *, msg, u32, start,
 
 	sk_mem_uncharge(msg->sk, len - pop);
 	msg->sg.size -= (len - pop);
+	sk_msg_reset_curr(msg);
 	sk_msg_compute_data_pointers(msg);
 	return 0;
 }
-- 
2.42.0

[PATCH 6.1 060/194] psample: Require CAP_NET_ADMIN when joining "packets" group

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ido Schimmel <idosch@nvidia.com>

[ Upstream commit 44ec98ea5ea9cfecd31a5c4cc124703cb5442832 ]

The "psample" generic netlink family notifies sampled packets over the
"packets" multicast group. This is problematic since by default generic
netlink allows non-root users to listen to these notifications.

Fix by marking the group with the 'GENL_UNS_ADMIN_PERM' flag. This will
prevent non-root users or root without the 'CAP_NET_ADMIN' capability
(in the user namespace owning the network namespace) from joining the
group.

Tested using [1].

Before:

 # capsh -- -c ./psample_repo
 # capsh --drop=cap_net_admin -- -c ./psample_repo

After:

 # capsh -- -c ./psample_repo
 # capsh --drop=cap_net_admin -- -c ./psample_repo
 Failed to join "packets" multicast group

[1]
 $ cat psample.c
 #include <stdio.h>
 #include <netlink/genl/ctrl.h>
 #include <netlink/genl/genl.h>
 #include <netlink/socket.h>

 int join_grp(struct nl_sock *sk, const char *grp_name)
 {
 	int grp, err;

 	grp = genl_ctrl_resolve_grp(sk, "psample", grp_name);
 	if (grp < 0) {
 		fprintf(stderr, "Failed to resolve \"%s\" multicast group\n",
 			grp_name);
 		return grp;
 	}

 	err = nl_socket_add_memberships(sk, grp, NFNLGRP_NONE);
 	if (err) {
 		fprintf(stderr, "Failed to join \"%s\" multicast group\n",
 			grp_name);
 		return err;
 	}

 	return 0;
 }

 int main(int argc, char **argv)
 {
 	struct nl_sock *sk;
 	int err;

 	sk = nl_socket_alloc();
 	if (!sk) {
 		fprintf(stderr, "Failed to allocate socket\n");
 		return -1;
 	}

 	err = genl_connect(sk);
 	if (err) {
 		fprintf(stderr, "Failed to connect socket\n");
 		return err;
 	}

 	err = join_grp(sk, "config");
 	if (err)
 		return err;

 	err = join_grp(sk, "packets");
 	if (err)
 		return err;

 	return 0;
 }
 $ gcc -I/usr/include/libnl3 -lnl-3 -lnl-genl-3 -o psample_repo psample.c

Fixes: 6ae0a6286171 ("net: Introduce psample, a new genetlink channel for packet sampling")
Reported-by: "The UK's National Cyber Security Centre (NCSC)" <security@ncsc.gov.uk>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231206213102.1824398-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/psample/psample.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/psample/psample.c b/net/psample/psample.c
index 81a794e36f535..c34e902855dbe 100644
--- a/net/psample/psample.c
+++ b/net/psample/psample.c
@@ -31,7 +31,8 @@ enum psample_nl_multicast_groups {
 
 static const struct genl_multicast_group psample_nl_mcgrps[] = {
 	[PSAMPLE_NL_MCGRP_CONFIG] = { .name = PSAMPLE_NL_MCGRP_CONFIG_NAME },
-	[PSAMPLE_NL_MCGRP_SAMPLE] = { .name = PSAMPLE_NL_MCGRP_SAMPLE_NAME },
+	[PSAMPLE_NL_MCGRP_SAMPLE] = { .name = PSAMPLE_NL_MCGRP_SAMPLE_NAME,
+				      .flags = GENL_UNS_ADMIN_PERM },
 };
 
 static struct genl_family psample_nl_family __ro_after_init;
-- 
2.42.0

[PATCH 6.1 061/194] drop_monitor: Require CAP_SYS_ADMIN when joining "events" group

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ido Schimmel <idosch@nvidia.com>

[ Upstream commit e03781879a0d524ce3126678d50a80484a513c4b ]

The "NET_DM" generic netlink family notifies drop locations over the
"events" multicast group. This is problematic since by default generic
netlink allows non-root users to listen to these notifications.

Fix by adding a new field to the generic netlink multicast group
structure that when set prevents non-root users or root without the
'CAP_SYS_ADMIN' capability (in the user namespace owning the network
namespace) from joining the group. Set this field for the "events"
group. Use 'CAP_SYS_ADMIN' rather than 'CAP_NET_ADMIN' because of the
nature of the information that is shared over this group.

Note that the capability check in this case will always be performed
against the initial user namespace since the family is not netns aware
and only operates in the initial network namespace.

A new field is added to the structure rather than using the "flags"
field because the existing field uses uAPI flags and it is inappropriate
to add a new uAPI flag for an internal kernel check. In net-next we can
rework the "flags" field to use internal flags and fold the new field
into it. But for now, in order to reduce the amount of changes, add a
new field.

Since the information can only be consumed by root, mark the control
plane operations that start and stop the tracing as root-only using the
'GENL_ADMIN_PERM' flag.

Tested using [1].

Before:

 # capsh -- -c ./dm_repo
 # capsh --drop=cap_sys_admin -- -c ./dm_repo

After:

 # capsh -- -c ./dm_repo
 # capsh --drop=cap_sys_admin -- -c ./dm_repo
 Failed to join "events" multicast group

[1]
 $ cat dm.c
 #include <stdio.h>
 #include <netlink/genl/ctrl.h>
 #include <netlink/genl/genl.h>
 #include <netlink/socket.h>

 int main(int argc, char **argv)
 {
 	struct nl_sock *sk;
 	int grp, err;

 	sk = nl_socket_alloc();
 	if (!sk) {
 		fprintf(stderr, "Failed to allocate socket\n");
 		return -1;
 	}

 	err = genl_connect(sk);
 	if (err) {
 		fprintf(stderr, "Failed to connect socket\n");
 		return err;
 	}

 	grp = genl_ctrl_resolve_grp(sk, "NET_DM", "events");
 	if (grp < 0) {
 		fprintf(stderr,
 			"Failed to resolve \"events\" multicast group\n");
 		return grp;
 	}

 	err = nl_socket_add_memberships(sk, grp, NFNLGRP_NONE);
 	if (err) {
 		fprintf(stderr, "Failed to join \"events\" multicast group\n");
 		return err;
 	}

 	return 0;
 }
 $ gcc -I/usr/include/libnl3 -lnl-3 -lnl-genl-3 -o dm_repo dm.c

Fixes: 9a8afc8d3962 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol")
Reported-by: "The UK's National Cyber Security Centre (NCSC)" <security@ncsc.gov.uk>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231206213102.1824398-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/genetlink.h | 2 ++
 net/core/drop_monitor.c | 4 +++-
 net/netlink/genetlink.c | 3 +++
 3 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/include/net/genetlink.h b/include/net/genetlink.h
index 9f97f73615b69..b9e5a22ae3ff9 100644
--- a/include/net/genetlink.h
+++ b/include/net/genetlink.h
@@ -12,10 +12,12 @@
  * struct genl_multicast_group - generic netlink multicast group
  * @name: name of the multicast group, names are per-family
  * @flags: GENL_* flags (%GENL_ADMIN_PERM or %GENL_UNS_ADMIN_PERM)
+ * @cap_sys_admin: whether %CAP_SYS_ADMIN is required for binding
  */
 struct genl_multicast_group {
 	char			name[GENL_NAMSIZ];
 	u8			flags;
+	u8			cap_sys_admin:1;
 };
 
 struct genl_ops;
diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c
index f084a4a6b7ab2..8e0a90b45df22 100644
--- a/net/core/drop_monitor.c
+++ b/net/core/drop_monitor.c
@@ -181,7 +181,7 @@ static struct sk_buff *reset_per_cpu_data(struct per_cpu_dm_data *data)
 }
 
 static const struct genl_multicast_group dropmon_mcgrps[] = {
-	{ .name = "events", },
+	{ .name = "events", .cap_sys_admin = 1 },
 };
 
 static void send_dm_alert(struct work_struct *work)
@@ -1604,11 +1604,13 @@ static const struct genl_small_ops dropmon_ops[] = {
 		.cmd = NET_DM_CMD_START,
 		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
 		.doit = net_dm_cmd_trace,
+		.flags = GENL_ADMIN_PERM,
 	},
 	{
 		.cmd = NET_DM_CMD_STOP,
 		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
 		.doit = net_dm_cmd_trace,
+		.flags = GENL_ADMIN_PERM,
 	},
 	{
 		.cmd = NET_DM_CMD_CONFIG_GET,
diff --git a/net/netlink/genetlink.c b/net/netlink/genetlink.c
index 3e16527beb914..505d3b910cc29 100644
--- a/net/netlink/genetlink.c
+++ b/net/netlink/genetlink.c
@@ -1438,6 +1438,9 @@ static int genl_bind(struct net *net, int group)
 		if ((grp->flags & GENL_UNS_ADMIN_PERM) &&
 		    !ns_capable(net->user_ns, CAP_NET_ADMIN))
 			ret = -EPERM;
+		if (grp->cap_sys_admin &&
+		    !ns_capable(net->user_ns, CAP_SYS_ADMIN))
+			ret = -EPERM;
 
 		break;
 	}
-- 
2.42.0

[PATCH 6.1 062/194] mm/damon/sysfs: eliminate potential uninitialized variable warning

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@linaro.org>

[ Upstream commit 85c2ceaafbd306814a3a4740bf4d95ac26a8b36a ]

The "err" variable is not initialized if damon_target_has_pid(ctx) is
false and sys_target->regions->nr is zero.

Link: https://lkml.kernel.org/r/739e6aaf-a634-4e33-98a8-16546379ec9f@moroto.mountain
Fixes: 0bcd216c4741 ("mm/damon/sysfs: update monitoring target regions for online input commit")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/damon/sysfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/damon/sysfs.c b/mm/damon/sysfs.c
index dbf5e4de97a0f..9ea21b6d266be 100644
--- a/mm/damon/sysfs.c
+++ b/mm/damon/sysfs.c
@@ -2210,7 +2210,7 @@ static int damon_sysfs_update_target(struct damon_target *target,
 		struct damon_ctx *ctx,
 		struct damon_sysfs_target *sys_target)
 {
-	int err;
+	int err = 0;
 
 	if (damon_target_has_pid(ctx)) {
 		err = damon_sysfs_update_target_pid(target, sys_target->pid);
-- 
2.42.0

[PATCH 6.1 063/194] tee: optee: Fix supplicant based device enumeration

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sumit Garg <sumit.garg@linaro.org>

[ Upstream commit 7269cba53d906cf257c139d3b3a53ad272176bca ]

Currently supplicant dependent optee device enumeration only registers
devices whenever tee-supplicant is invoked for the first time. But it
forgets to remove devices when tee-supplicant daemon stops running and
closes its context gracefully. This leads to following error for fTPM
driver during reboot/shutdown:

[   73.466791] tpm tpm0: ftpm_tee_tpm_op_send: SUBMIT_COMMAND invoke error: 0xffff3024

Fix this by adding an attribute for supplicant dependent devices so that
the user-space service can detect and detach supplicant devices before
closing the supplicant:

$ for dev in /sys/bus/tee/devices/*; do if [[ -f "$dev/need_supplicant" && -f "$dev/driver/unbind" ]]; \
      then echo $(basename "$dev") > $dev/driver/unbind; fi done

Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Closes: https://github.com/OP-TEE/optee_os/issues/6094
Fixes: 5f178bb71e3a ("optee: enable support for multi-stage bus enumeration")
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
[jw: fixed up Date documentation]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../ABI/testing/sysfs-bus-optee-devices         |  9 +++++++++
 drivers/tee/optee/device.c                      | 17 +++++++++++++++--
 2 files changed, 24 insertions(+), 2 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-bus-optee-devices b/Documentation/ABI/testing/sysfs-bus-optee-devices
index 0f58701367b66..af31e5a22d89f 100644
--- a/Documentation/ABI/testing/sysfs-bus-optee-devices
+++ b/Documentation/ABI/testing/sysfs-bus-optee-devices
@@ -6,3 +6,12 @@ Description:
 		OP-TEE bus provides reference to registered drivers under this directory. The <uuid>
 		matches Trusted Application (TA) driver and corresponding TA in secure OS. Drivers
 		are free to create needed API under optee-ta-<uuid> directory.
+
+What:		/sys/bus/tee/devices/optee-ta-<uuid>/need_supplicant
+Date:		November 2023
+KernelVersion:	6.7
+Contact:	op-tee@lists.trustedfirmware.org
+Description:
+		Allows to distinguish whether an OP-TEE based TA/device requires user-space
+		tee-supplicant to function properly or not. This attribute will be present for
+		devices which depend on tee-supplicant to be running.
diff --git a/drivers/tee/optee/device.c b/drivers/tee/optee/device.c
index 64f0e047c23d2..4b10921276942 100644
--- a/drivers/tee/optee/device.c
+++ b/drivers/tee/optee/device.c
@@ -60,7 +60,16 @@ static void optee_release_device(struct device *dev)
 	kfree(optee_device);
 }
 
-static int optee_register_device(const uuid_t *device_uuid)
+static ssize_t need_supplicant_show(struct device *dev,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	return 0;
+}
+
+static DEVICE_ATTR_RO(need_supplicant);
+
+static int optee_register_device(const uuid_t *device_uuid, u32 func)
 {
 	struct tee_client_device *optee_device = NULL;
 	int rc;
@@ -83,6 +92,10 @@ static int optee_register_device(const uuid_t *device_uuid)
 		put_device(&optee_device->dev);
 	}
 
+	if (func == PTA_CMD_GET_DEVICES_SUPP)
+		device_create_file(&optee_device->dev,
+				   &dev_attr_need_supplicant);
+
 	return rc;
 }
 
@@ -142,7 +155,7 @@ static int __optee_enumerate_devices(u32 func)
 	num_devices = shm_size / sizeof(uuid_t);
 
 	for (idx = 0; idx < num_devices; idx++) {
-		rc = optee_register_device(&device_uuid[idx]);
+		rc = optee_register_device(&device_uuid[idx], func);
 		if (rc)
 			goto out_shm;
 	}
-- 
2.42.0

[PATCH 6.1 064/194] RDMA/hns: Fix unnecessary err return when using invalid congest control algorithm

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Junxian Huang <huangjunxian6@hisilicon.com>

[ Upstream commit efb9cbf66440482ceaa90493d648226ab7ec2ebf ]

Add a default congest control algorithm so that driver won't return
an error when the configured algorithm is invalid.

Fixes: f91696f2f053 ("RDMA/hns: Support congestion control type selection according to the FW")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231028093242.670325-1-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
index 8a9d28f81149a..c2ee80546d120 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -4913,10 +4913,15 @@ static int check_cong_type(struct ib_qp *ibqp,
 		cong_alg->wnd_mode_sel = WND_LIMIT;
 		break;
 	default:
-		ibdev_err(&hr_dev->ib_dev,
-			  "error type(%u) for congestion selection.\n",
-			  hr_dev->caps.cong_type);
-		return -EINVAL;
+		ibdev_warn(&hr_dev->ib_dev,
+			   "invalid type(%u) for congestion selection.\n",
+			   hr_dev->caps.cong_type);
+		hr_dev->caps.cong_type = CONG_TYPE_DCQCN;
+		cong_alg->alg_sel = CONG_DCQCN;
+		cong_alg->alg_sub_sel = UNSUPPORT_CONG_LEVEL;
+		cong_alg->dip_vld = DIP_INVALID;
+		cong_alg->wnd_mode_sel = WND_LIMIT;
+		break;
 	}
 
 	return 0;
-- 
2.42.0

[PATCH 6.1 065/194] RDMA/irdma: Do not modify to SQD on error

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mustafa Ismail <mustafa.ismail@intel.com>

[ Upstream commit ba12ab66aa83a2340a51ad6e74b284269745138c ]

Remove the modify to SQD before going to ERROR state. It is not needed.

Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20231114170246.238-2-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/irdma/verbs.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/infiniband/hw/irdma/verbs.c b/drivers/infiniband/hw/irdma/verbs.c
index 3b8b2341981ea..02015927fd046 100644
--- a/drivers/infiniband/hw/irdma/verbs.c
+++ b/drivers/infiniband/hw/irdma/verbs.c
@@ -1363,13 +1363,6 @@ int irdma_modify_qp_roce(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 		case IB_QPS_SQE:
 		case IB_QPS_ERR:
 		case IB_QPS_RESET:
-			if (iwqp->iwarp_state == IRDMA_QP_STATE_RTS) {
-				spin_unlock_irqrestore(&iwqp->lock, flags);
-				info.next_iwarp_state = IRDMA_QP_STATE_SQD;
-				irdma_hw_modify_qp(iwdev, iwqp, &info, true);
-				spin_lock_irqsave(&iwqp->lock, flags);
-			}
-
 			if (iwqp->iwarp_state == IRDMA_QP_STATE_ERROR) {
 				spin_unlock_irqrestore(&iwqp->lock, flags);
 				if (udata && udata->inlen) {
-- 
2.42.0

[PATCH 6.1 066/194] RDMA/irdma: Add wait for suspend on SQD

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mustafa Ismail <mustafa.ismail@intel.com>

[ Upstream commit bd6da690c27d75cae432c09162d054b34fa2156f ]

Currently, there is no wait for the QP suspend to complete on a modify
to SQD state. Add a wait, after the modify to SQD state, for the Suspend
Complete AE. While we are at it, update the suspend timeout value in
irdma_prep_tc_change to use IRDMA_EVENT_TIMEOUT_MS too.

Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20231114170246.238-3-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/irdma/hw.c    |  6 +++++-
 drivers/infiniband/hw/irdma/main.c  |  2 +-
 drivers/infiniband/hw/irdma/main.h  |  2 +-
 drivers/infiniband/hw/irdma/verbs.c | 21 +++++++++++++++++++++
 drivers/infiniband/hw/irdma/verbs.h |  1 +
 5 files changed, 29 insertions(+), 3 deletions(-)

diff --git a/drivers/infiniband/hw/irdma/hw.c b/drivers/infiniband/hw/irdma/hw.c
index c07ce85d243f1..027584febb8ca 100644
--- a/drivers/infiniband/hw/irdma/hw.c
+++ b/drivers/infiniband/hw/irdma/hw.c
@@ -322,7 +322,11 @@ static void irdma_process_aeq(struct irdma_pci_f *rf)
 			break;
 		case IRDMA_AE_QP_SUSPEND_COMPLETE:
 			if (iwqp->iwdev->vsi.tc_change_pending) {
-				atomic_dec(&iwqp->sc_qp.vsi->qp_suspend_reqs);
+				if (!atomic_dec_return(&qp->vsi->qp_suspend_reqs))
+					wake_up(&iwqp->iwdev->suspend_wq);
+			}
+			if (iwqp->suspend_pending) {
+				iwqp->suspend_pending = false;
 				wake_up(&iwqp->iwdev->suspend_wq);
 			}
 			break;
diff --git a/drivers/infiniband/hw/irdma/main.c b/drivers/infiniband/hw/irdma/main.c
index 514453777e07d..be1030d1adfaf 100644
--- a/drivers/infiniband/hw/irdma/main.c
+++ b/drivers/infiniband/hw/irdma/main.c
@@ -48,7 +48,7 @@ static void irdma_prep_tc_change(struct irdma_device *iwdev)
 	/* Wait for all qp's to suspend */
 	wait_event_timeout(iwdev->suspend_wq,
 			   !atomic_read(&iwdev->vsi.qp_suspend_reqs),
-			   IRDMA_EVENT_TIMEOUT);
+			   msecs_to_jiffies(IRDMA_EVENT_TIMEOUT_MS));
 	irdma_ws_reset(&iwdev->vsi);
 }
 
diff --git a/drivers/infiniband/hw/irdma/main.h b/drivers/infiniband/hw/irdma/main.h
index 9cbe64311f985..6a6b14d8fca45 100644
--- a/drivers/infiniband/hw/irdma/main.h
+++ b/drivers/infiniband/hw/irdma/main.h
@@ -78,7 +78,7 @@ extern struct auxiliary_driver i40iw_auxiliary_drv;
 
 #define MAX_DPC_ITERATIONS	128
 
-#define IRDMA_EVENT_TIMEOUT		50000
+#define IRDMA_EVENT_TIMEOUT_MS		5000
 #define IRDMA_VCHNL_EVENT_TIMEOUT	100000
 #define IRDMA_RST_TIMEOUT_HZ		4
 
diff --git a/drivers/infiniband/hw/irdma/verbs.c b/drivers/infiniband/hw/irdma/verbs.c
index 02015927fd046..447e1bcc82a32 100644
--- a/drivers/infiniband/hw/irdma/verbs.c
+++ b/drivers/infiniband/hw/irdma/verbs.c
@@ -1098,6 +1098,21 @@ static int irdma_query_pkey(struct ib_device *ibdev, u32 port, u16 index,
 	return 0;
 }
 
+static int irdma_wait_for_suspend(struct irdma_qp *iwqp)
+{
+	if (!wait_event_timeout(iwqp->iwdev->suspend_wq,
+				!iwqp->suspend_pending,
+				msecs_to_jiffies(IRDMA_EVENT_TIMEOUT_MS))) {
+		iwqp->suspend_pending = false;
+		ibdev_warn(&iwqp->iwdev->ibdev,
+			   "modify_qp timed out waiting for suspend. qp_id = %d, last_ae = 0x%x\n",
+			   iwqp->ibqp.qp_num, iwqp->last_aeq);
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
 /**
  * irdma_modify_qp_roce - modify qp request
  * @ibqp: qp's pointer for modify
@@ -1359,6 +1374,7 @@ int irdma_modify_qp_roce(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 
 			info.next_iwarp_state = IRDMA_QP_STATE_SQD;
 			issue_modify_qp = 1;
+			iwqp->suspend_pending = true;
 			break;
 		case IB_QPS_SQE:
 		case IB_QPS_ERR:
@@ -1399,6 +1415,11 @@ int irdma_modify_qp_roce(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 			ctx_info->rem_endpoint_idx = udp_info->arp_idx;
 			if (irdma_hw_modify_qp(iwdev, iwqp, &info, true))
 				return -EINVAL;
+			if (info.next_iwarp_state == IRDMA_QP_STATE_SQD) {
+				ret = irdma_wait_for_suspend(iwqp);
+				if (ret)
+					return ret;
+			}
 			spin_lock_irqsave(&iwqp->lock, flags);
 			if (iwqp->iwarp_state == info.curr_iwarp_state) {
 				iwqp->iwarp_state = info.next_iwarp_state;
diff --git a/drivers/infiniband/hw/irdma/verbs.h b/drivers/infiniband/hw/irdma/verbs.h
index a536e9fa85ebf..9f9e273bbff3e 100644
--- a/drivers/infiniband/hw/irdma/verbs.h
+++ b/drivers/infiniband/hw/irdma/verbs.h
@@ -193,6 +193,7 @@ struct irdma_qp {
 	u8 flush_issued : 1;
 	u8 sig_all : 1;
 	u8 pau_mode : 1;
+	u8 suspend_pending : 1;
 	u8 rsvd : 1;
 	u8 iwarp_state;
 	u16 term_sq_flush_code;
-- 
2.42.0

[PATCH 6.1 067/194] arm64: dts: rockchip: Expand reg size of vdec node for RK3328

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jonas Karlman <jonas@kwiboo.se>

[ Upstream commit 0b6240d697a96eaa45a2a5503a274ebb4f162fa3 ]

Expand the reg size for the vdec node to include cache/performance
registers the rkvdec driver writes to.

Fixes: 17408c9b119d ("arm64: dts: rockchip: Add vdec support for RK3328")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20231105233630.3927502-9-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3328.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 49ae15708a0b6..905a50aa5dc38 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -666,7 +666,7 @@
 
 	vdec: video-codec@ff360000 {
 		compatible = "rockchip,rk3328-vdec", "rockchip,rk3399-vdec";
-		reg = <0x0 0xff360000 0x0 0x400>;
+		reg = <0x0 0xff360000 0x0 0x480>;
 		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>,
 			 <&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>;
-- 
2.42.0

[PATCH 6.1 068/194] arm64: dts: rockchip: Expand reg size of vdec node for RK3399

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Bee <knaerzche@gmail.com>

[ Upstream commit 35938c18291b5da7422b2fac6dac0af11aa8d0d7 ]

Expand the reg size for the vdec node to include cache/performance
registers the rkvdec driver writes to. Also add missing clocks to the
related power-domain.

Fixes: cbd7214402ec ("arm64: dts: rockchip: Define the rockchip Video Decoder node on rk3399")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20231105233630.3927502-10-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 5f3caf01badeb..a7e6eccb14cc6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1062,7 +1062,9 @@
 			power-domain@RK3399_PD_VDU {
 				reg = <RK3399_PD_VDU>;
 				clocks = <&cru ACLK_VDU>,
-					 <&cru HCLK_VDU>;
+					 <&cru HCLK_VDU>,
+					 <&cru SCLK_VDU_CA>,
+					 <&cru SCLK_VDU_CORE>;
 				pm_qos = <&qos_video_m1_r>,
 					 <&qos_video_m1_w>;
 				#power-domain-cells = <0>;
@@ -1338,7 +1340,7 @@
 
 	vdec: video-codec@ff660000 {
 		compatible = "rockchip,rk3399-vdec";
-		reg = <0x0 0xff660000 0x0 0x400>;
+		reg = <0x0 0xff660000 0x0 0x480>;
 		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>,
 			 <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>;
-- 
2.42.0

[PATCH 6.1 069/194] ASoC: fsl_sai: Fix no frame sync clock issue on i.MX8MP

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shengjiu Wang <shengjiu.wang@nxp.com>

[ Upstream commit 14e8442e0789598514f3c9de014950de9feda7a4 ]

On i.MX8MP, when the TERE and FSD_MSTR enabled before configuring
the word width, there will be no frame sync clock issue, because
old word width impact the generation of frame sync.

TERE enabled earlier only for i.MX8MP case for the hardware limitation,
So need to disable FSD_MSTR before configuring word width, then enable
FSD_MSTR bit for this specific case.

Fixes: 3e4a82612998 ("ASoC: fsl_sai: MCLK bind with TX/RX enable bit")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1700474735-3863-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/fsl/fsl_sai.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index 96fd9095e544b..6364d9be28fbb 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -674,6 +674,20 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream,
 			   FSL_SAI_CR3_TRCE_MASK,
 			   FSL_SAI_CR3_TRCE((dl_cfg[dl_cfg_idx].mask[tx] & trce_mask)));
 
+	/*
+	 * When the TERE and FSD_MSTR enabled before configuring the word width
+	 * There will be no frame sync clock issue, because word width impact
+	 * the generation of frame sync clock.
+	 *
+	 * TERE enabled earlier only for i.MX8MP case for the hardware limitation,
+	 * We need to disable FSD_MSTR before configuring word width, then enable
+	 * FSD_MSTR bit for this specific case.
+	 */
+	if (sai->soc_data->mclk_with_tere && sai->mclk_direction_output &&
+	    !sai->is_consumer_mode)
+		regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, ofs),
+				   FSL_SAI_CR4_FSD_MSTR, 0);
+
 	regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, ofs),
 			   FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK |
 			   FSL_SAI_CR4_CHMOD_MASK,
@@ -681,6 +695,13 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream,
 	regmap_update_bits(sai->regmap, FSL_SAI_xCR5(tx, ofs),
 			   FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
 			   FSL_SAI_CR5_FBT_MASK, val_cr5);
+
+	/* Enable FSD_MSTR after configuring word width */
+	if (sai->soc_data->mclk_with_tere && sai->mclk_direction_output &&
+	    !sai->is_consumer_mode)
+		regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, ofs),
+				   FSL_SAI_CR4_FSD_MSTR, FSL_SAI_CR4_FSD_MSTR);
+
 	regmap_write(sai->regmap, FSL_SAI_xMR(tx),
 		     ~0UL - ((1 << min(channels, slots)) - 1));
 
-- 
2.42.0

[PATCH 6.1 070/194] RDMA/rtrs-srv: Do not unconditionally enable irq

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jack Wang <jinpu.wang@ionos.com>

[ Upstream commit 3ee7ecd712048ade6482bea4b2f3dcaf039c0348 ]

When IO is completed, rtrs can be called in softirq context,
unconditionally enabling irq could cause panic.

To be on safe side, use spin_lock_irqsave and spin_unlock_irqrestore
instread.

Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality")
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Florian-Ewald Mueller <florian-ewald.mueller@ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://lore.kernel.org/r/20231120154146.920486-2-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/ulp/rtrs/rtrs-srv.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/ulp/rtrs/rtrs-srv.c b/drivers/infiniband/ulp/rtrs/rtrs-srv.c
index 22d7ba05e9fe8..e26488ee36eac 100644
--- a/drivers/infiniband/ulp/rtrs/rtrs-srv.c
+++ b/drivers/infiniband/ulp/rtrs/rtrs-srv.c
@@ -63,8 +63,9 @@ static bool rtrs_srv_change_state(struct rtrs_srv_path *srv_path,
 {
 	enum rtrs_srv_state old_state;
 	bool changed = false;
+	unsigned long flags;
 
-	spin_lock_irq(&srv_path->state_lock);
+	spin_lock_irqsave(&srv_path->state_lock, flags);
 	old_state = srv_path->state;
 	switch (new_state) {
 	case RTRS_SRV_CONNECTED:
@@ -85,7 +86,7 @@ static bool rtrs_srv_change_state(struct rtrs_srv_path *srv_path,
 	}
 	if (changed)
 		srv_path->state = new_state;
-	spin_unlock_irq(&srv_path->state_lock);
+	spin_unlock_irqrestore(&srv_path->state_lock, flags);
 
 	return changed;
 }
-- 
2.42.0

[PATCH 6.1 071/194] RDMA/rtrs-clt: Start hb after path_up

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jack Wang <jinpu.wang@ionos.com>

[ Upstream commit 3e44a61b5db873612e20e7b7922468d7d1ac2d22 ]

If we start hb too early, it will confuse server side to close
the session.

Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://lore.kernel.org/r/20231120154146.920486-3-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/ulp/rtrs/rtrs-clt.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/infiniband/ulp/rtrs/rtrs-clt.c b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
index a67f58359de9e..1bad7fc3231f4 100644
--- a/drivers/infiniband/ulp/rtrs/rtrs-clt.c
+++ b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
@@ -2346,8 +2346,6 @@ static int init_conns(struct rtrs_clt_path *clt_path)
 	if (err)
 		goto destroy;
 
-	rtrs_start_hb(&clt_path->s);
-
 	return 0;
 
 destroy:
@@ -2621,6 +2619,7 @@ static int init_path(struct rtrs_clt_path *clt_path)
 		goto out;
 	}
 	rtrs_clt_path_up(clt_path);
+	rtrs_start_hb(&clt_path->s);
 out:
 	mutex_unlock(&clt_path->init_mutex);
 
-- 
2.42.0

[PATCH 6.1 072/194] RDMA/rtrs-srv: Check return values while processing info request

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Md Haris Iqbal <haris.iqbal@ionos.com>

[ Upstream commit ed1e52aefa16f15dc2f04054a3baf11726a7460e ]

While processing info request, it could so happen that the srv_path goes
to CLOSING state, cause of any of the error events from RDMA. That state
change should be picked up while trying to change the state in
process_info_req, by checking the return value. In case the state change
call in process_info_req fails, we fail the processing.

We should also check the return value for rtrs_srv_path_up, since it
sends a link event to the client above, and the client can fail for any
reason.

Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality")
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://lore.kernel.org/r/20231120154146.920486-4-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/ulp/rtrs/rtrs-srv.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/infiniband/ulp/rtrs/rtrs-srv.c b/drivers/infiniband/ulp/rtrs/rtrs-srv.c
index e26488ee36eac..6710887b1a13f 100644
--- a/drivers/infiniband/ulp/rtrs/rtrs-srv.c
+++ b/drivers/infiniband/ulp/rtrs/rtrs-srv.c
@@ -715,20 +715,23 @@ static void rtrs_srv_info_rsp_done(struct ib_cq *cq, struct ib_wc *wc)
 	WARN_ON(wc->opcode != IB_WC_SEND);
 }
 
-static void rtrs_srv_path_up(struct rtrs_srv_path *srv_path)
+static int rtrs_srv_path_up(struct rtrs_srv_path *srv_path)
 {
 	struct rtrs_srv_sess *srv = srv_path->srv;
 	struct rtrs_srv_ctx *ctx = srv->ctx;
-	int up;
+	int up, ret = 0;
 
 	mutex_lock(&srv->paths_ev_mutex);
 	up = ++srv->paths_up;
 	if (up == 1)
-		ctx->ops.link_ev(srv, RTRS_SRV_LINK_EV_CONNECTED, NULL);
+		ret = ctx->ops.link_ev(srv, RTRS_SRV_LINK_EV_CONNECTED, NULL);
 	mutex_unlock(&srv->paths_ev_mutex);
 
 	/* Mark session as established */
-	srv_path->established = true;
+	if (!ret)
+		srv_path->established = true;
+
+	return ret;
 }
 
 static void rtrs_srv_path_down(struct rtrs_srv_path *srv_path)
@@ -857,7 +860,12 @@ static int process_info_req(struct rtrs_srv_con *con,
 		goto iu_free;
 	kobject_get(&srv_path->kobj);
 	get_device(&srv_path->srv->dev);
-	rtrs_srv_change_state(srv_path, RTRS_SRV_CONNECTED);
+	err = rtrs_srv_change_state(srv_path, RTRS_SRV_CONNECTED);
+	if (!err) {
+		rtrs_err(s, "rtrs_srv_change_state(), err: %d\n", err);
+		goto iu_free;
+	}
+
 	rtrs_srv_start_hb(srv_path);
 
 	/*
@@ -866,7 +874,11 @@ static int process_info_req(struct rtrs_srv_con *con,
 	 * all connections are successfully established.  Thus, simply notify
 	 * listener with a proper event if we are the first path.
 	 */
-	rtrs_srv_path_up(srv_path);
+	err = rtrs_srv_path_up(srv_path);
+	if (err) {
+		rtrs_err(s, "rtrs_srv_path_up(), err: %d\n", err);
+		goto iu_free;
+	}
 
 	ib_dma_sync_single_for_device(srv_path->s.dev->ib_dev,
 				      tx_iu->dma_addr,
-- 
2.42.0

[PATCH 6.1 073/194] RDMA/rtrs-srv: Free srv_mr iu only when always_invalidate is true

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Md Haris Iqbal <haris.iqbal@ionos.com>

[ Upstream commit 3a71cd6ca0ce33d1af019ecf1d7167406fa54400 ]

Since srv_mr->iu is allocated and used only when always_invalidate is
true, free it only when always_invalidate is true.

Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality")
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://lore.kernel.org/r/20231120154146.920486-5-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/ulp/rtrs/rtrs-srv.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/ulp/rtrs/rtrs-srv.c b/drivers/infiniband/ulp/rtrs/rtrs-srv.c
index 6710887b1a13f..091db0853a6fb 100644
--- a/drivers/infiniband/ulp/rtrs/rtrs-srv.c
+++ b/drivers/infiniband/ulp/rtrs/rtrs-srv.c
@@ -549,7 +549,10 @@ static void unmap_cont_bufs(struct rtrs_srv_path *srv_path)
 		struct rtrs_srv_mr *srv_mr;
 
 		srv_mr = &srv_path->mrs[i];
-		rtrs_iu_free(srv_mr->iu, srv_path->s.dev->ib_dev, 1);
+
+		if (always_invalidate)
+			rtrs_iu_free(srv_mr->iu, srv_path->s.dev->ib_dev, 1);
+
 		ib_dereg_mr(srv_mr->mr);
 		ib_dma_unmap_sg(srv_path->s.dev->ib_dev, srv_mr->sgt.sgl,
 				srv_mr->sgt.nents, DMA_BIDIRECTIONAL);
-- 
2.42.0

[PATCH 6.1 074/194] RDMA/rtrs-srv: Destroy path files after making sure no IOs in-flight

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Md Haris Iqbal <haris.iqbal@ionos.com>

[ Upstream commit c4d32e77fc1006f99eeb78417efc3d81a384072a ]

Destroying path files may lead to the freeing of rdma_stats. This creates
the following race.

An IO is in-flight, or has just passed the session state check in
process_read/process_write. The close_work gets triggered and the function
rtrs_srv_close_work() starts and does destroy path which frees the
rdma_stats. After this the function process_read/process_write resumes and
tries to update the stats through the function rtrs_srv_update_rdma_stats

This commit solves the problem by moving the destroy path function to a
later point. This point makes sure any inflights are completed. This is
done by qp drain, and waiting for all in-flights through ops_id.

Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality")
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Santosh Kumar Pradhan <santosh.pradhan@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://lore.kernel.org/r/20231120154146.920486-6-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/ulp/rtrs/rtrs-srv.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/ulp/rtrs/rtrs-srv.c b/drivers/infiniband/ulp/rtrs/rtrs-srv.c
index 091db0853a6fb..e978ee4bb73ae 100644
--- a/drivers/infiniband/ulp/rtrs/rtrs-srv.c
+++ b/drivers/infiniband/ulp/rtrs/rtrs-srv.c
@@ -1537,7 +1537,6 @@ static void rtrs_srv_close_work(struct work_struct *work)
 
 	srv_path = container_of(work, typeof(*srv_path), close_work);
 
-	rtrs_srv_destroy_path_files(srv_path);
 	rtrs_srv_stop_hb(srv_path);
 
 	for (i = 0; i < srv_path->s.con_num; i++) {
@@ -1557,6 +1556,8 @@ static void rtrs_srv_close_work(struct work_struct *work)
 	/* Wait for all completion */
 	wait_for_completion(&srv_path->complete_done);
 
+	rtrs_srv_destroy_path_files(srv_path);
+
 	/* Notify upper layer if we are the last path */
 	rtrs_srv_path_down(srv_path);
 
-- 
2.42.0

[PATCH 6.1 075/194] RDMA/rtrs-clt: Fix the max_send_wr setting

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jack Wang <jinpu.wang@ionos.com>

[ Upstream commit 6d09f6f7d7584e099633282ea915988914f86529 ]

For each write request, we need Request, Response Memory Registration,
Local Invalidate.

Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://lore.kernel.org/r/20231120154146.920486-7-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/ulp/rtrs/rtrs-clt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/ulp/rtrs/rtrs-clt.c b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
index 1bad7fc3231f4..c0781d4279cb2 100644
--- a/drivers/infiniband/ulp/rtrs/rtrs-clt.c
+++ b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
@@ -1694,7 +1694,7 @@ static int create_con_cq_qp(struct rtrs_clt_con *con)
 		clt_path->s.dev_ref++;
 		max_send_wr = min_t(int, wr_limit,
 			      /* QD * (REQ + RSP + FR REGS or INVS) + drain */
-			      clt_path->queue_depth * 3 + 1);
+			      clt_path->queue_depth * 4 + 1);
 		max_recv_wr = min_t(int, wr_limit,
 			      clt_path->queue_depth * 3 + 1);
 		max_send_sge = 2;
-- 
2.42.0

[PATCH 6.1 076/194] RDMA/rtrs-clt: Remove the warnings for req in_use check

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jack Wang <jinpu.wang@ionos.com>

[ Upstream commit 0c8bb6eb70ca41031f663b4481aac9ac78b53bc6 ]

As we chain the WR during write request: memory registration,
rdma write, local invalidate, if only the last WR fail to send due
to send queue overrun, the server can send back the reply, while
client mark the req->in_use to false in case of error in rtrs_clt_req
when error out from rtrs_post_rdma_write_sg.

Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://lore.kernel.org/r/20231120154146.920486-8-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/ulp/rtrs/rtrs-clt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/ulp/rtrs/rtrs-clt.c b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
index c0781d4279cb2..cc07c91f9c549 100644
--- a/drivers/infiniband/ulp/rtrs/rtrs-clt.c
+++ b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
@@ -382,7 +382,7 @@ static void complete_rdma_req(struct rtrs_clt_io_req *req, int errno,
 	struct rtrs_clt_path *clt_path;
 	int err;
 
-	if (WARN_ON(!req->in_use))
+	if (!req->in_use)
 		return;
 	if (WARN_ON(!req->con))
 		return;
-- 
2.42.0

[PATCH 6.1 077/194] RDMA/bnxt_re: Correct module description string

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>

[ Upstream commit 422b19f7f006e813ee0865aadce6a62b3c263c42 ]

The word "Driver" is repeated twice in the "modinfo bnxt_re"
output description. Fix it.

Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1700555387-6277-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/bnxt_re/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/bnxt_re/main.c b/drivers/infiniband/hw/bnxt_re/main.c
index e58893387bb4d..43d396a7d8e16 100644
--- a/drivers/infiniband/hw/bnxt_re/main.c
+++ b/drivers/infiniband/hw/bnxt_re/main.c
@@ -70,7 +70,7 @@ static char version[] =
 		BNXT_RE_DESC "\n";
 
 MODULE_AUTHOR("Eddie Wai <eddie.wai@broadcom.com>");
-MODULE_DESCRIPTION(BNXT_RE_DESC " Driver");
+MODULE_DESCRIPTION(BNXT_RE_DESC);
 MODULE_LICENSE("Dual BSD/GPL");
 
 /* globals */
-- 
2.42.0

[PATCH 6.1 078/194] RDMA/irdma: Refactor error handling in create CQP

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sindhu Devale <sindhu.devale@intel.com>

[ Upstream commit 133b1cba46c6c8b67c630eacc0a1e4969da16517 ]

In case of a failure in irdma_create_cqp, do not call
irdma_destroy_cqp, but cleanup all the allocated resources
in reverse order.

Drop the extra argument in irdma_destroy_cqp as its no longer needed.

Signed-off-by: Krzysztof Czurylo <krzysztof.czurylo@intel.com>
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230725155505.1069-3-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Stable-dep-of: 2b78832f50c4 ("RDMA/irdma: Fix UAF in irdma_sc_ccq_get_cqe_info()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/irdma/hw.c | 35 +++++++++++++++++++-------------
 1 file changed, 21 insertions(+), 14 deletions(-)

diff --git a/drivers/infiniband/hw/irdma/hw.c b/drivers/infiniband/hw/irdma/hw.c
index 027584febb8ca..8aa507e87df37 100644
--- a/drivers/infiniband/hw/irdma/hw.c
+++ b/drivers/infiniband/hw/irdma/hw.c
@@ -572,7 +572,7 @@ static void irdma_destroy_irq(struct irdma_pci_f *rf,
  * Issue destroy cqp request and
  * free the resources associated with the cqp
  */
-static void irdma_destroy_cqp(struct irdma_pci_f *rf, bool free_hwcqp)
+static void irdma_destroy_cqp(struct irdma_pci_f *rf)
 {
 	struct irdma_sc_dev *dev = &rf->sc_dev;
 	struct irdma_cqp *cqp = &rf->cqp;
@@ -580,8 +580,8 @@ static void irdma_destroy_cqp(struct irdma_pci_f *rf, bool free_hwcqp)
 
 	if (rf->cqp_cmpl_wq)
 		destroy_workqueue(rf->cqp_cmpl_wq);
-	if (free_hwcqp)
-		status = irdma_sc_cqp_destroy(dev->cqp);
+
+	status = irdma_sc_cqp_destroy(dev->cqp);
 	if (status)
 		ibdev_dbg(to_ibdev(dev), "ERR: Destroy CQP failed %d\n", status);
 
@@ -925,8 +925,8 @@ static int irdma_create_cqp(struct irdma_pci_f *rf)
 
 	cqp->scratch_array = kcalloc(sqsize, sizeof(*cqp->scratch_array), GFP_KERNEL);
 	if (!cqp->scratch_array) {
-		kfree(cqp->cqp_requests);
-		return -ENOMEM;
+		status = -ENOMEM;
+		goto err_scratch;
 	}
 
 	dev->cqp = &cqp->sc_cqp;
@@ -936,15 +936,14 @@ static int irdma_create_cqp(struct irdma_pci_f *rf)
 	cqp->sq.va = dma_alloc_coherent(dev->hw->device, cqp->sq.size,
 					&cqp->sq.pa, GFP_KERNEL);
 	if (!cqp->sq.va) {
-		kfree(cqp->scratch_array);
-		kfree(cqp->cqp_requests);
-		return -ENOMEM;
+		status = -ENOMEM;
+		goto err_sq;
 	}
 
 	status = irdma_obj_aligned_mem(rf, &mem, sizeof(struct irdma_cqp_ctx),
 				       IRDMA_HOST_CTX_ALIGNMENT_M);
 	if (status)
-		goto exit;
+		goto err_ctx;
 
 	dev->cqp->host_ctx_pa = mem.pa;
 	dev->cqp->host_ctx = mem.va;
@@ -970,7 +969,7 @@ static int irdma_create_cqp(struct irdma_pci_f *rf)
 	status = irdma_sc_cqp_init(dev->cqp, &cqp_init_info);
 	if (status) {
 		ibdev_dbg(to_ibdev(dev), "ERR: cqp init status %d\n", status);
-		goto exit;
+		goto err_ctx;
 	}
 
 	spin_lock_init(&cqp->req_lock);
@@ -981,7 +980,7 @@ static int irdma_create_cqp(struct irdma_pci_f *rf)
 		ibdev_dbg(to_ibdev(dev),
 			  "ERR: cqp create failed - status %d maj_err %d min_err %d\n",
 			  status, maj_err, min_err);
-		goto exit;
+		goto err_ctx;
 	}
 
 	INIT_LIST_HEAD(&cqp->cqp_avail_reqs);
@@ -995,8 +994,16 @@ static int irdma_create_cqp(struct irdma_pci_f *rf)
 	init_waitqueue_head(&cqp->remove_wq);
 	return 0;
 
-exit:
-	irdma_destroy_cqp(rf, false);
+err_ctx:
+	dma_free_coherent(dev->hw->device, cqp->sq.size,
+			  cqp->sq.va, cqp->sq.pa);
+	cqp->sq.va = NULL;
+err_sq:
+	kfree(cqp->scratch_array);
+	cqp->scratch_array = NULL;
+err_scratch:
+	kfree(cqp->cqp_requests);
+	cqp->cqp_requests = NULL;
 
 	return status;
 }
@@ -1744,7 +1751,7 @@ void irdma_ctrl_deinit_hw(struct irdma_pci_f *rf)
 				      rf->reset, rf->rdma_ver);
 		fallthrough;
 	case CQP_CREATED:
-		irdma_destroy_cqp(rf, true);
+		irdma_destroy_cqp(rf);
 		fallthrough;
 	case INITIAL_STATE:
 		irdma_del_init_mem(rf);
-- 
2.42.0

[PATCH 6.1 079/194] RDMA/irdma: Fix UAF in irdma_sc_ccq_get_cqe_info()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shifeng Li <lishifeng1992@126.com>

[ Upstream commit 2b78832f50c4d711e161b166d7d8790968051546 ]

When removing the irdma driver or unplugging its aux device, the ccq
queue is released before destorying the cqp_cmpl_wq queue.
But in the window, there may still be completion events for wqes. That
will cause a UAF in irdma_sc_ccq_get_cqe_info().

[34693.333191] BUG: KASAN: use-after-free in irdma_sc_ccq_get_cqe_info+0x82f/0x8c0 [irdma]
[34693.333194] Read of size 8 at addr ffff889097f80818 by task kworker/u67:1/26327
[34693.333194]
[34693.333199] CPU: 9 PID: 26327 Comm: kworker/u67:1 Kdump: loaded Tainted: G           O     --------- -t - 4.18.0 #1
[34693.333200] Hardware name: SANGFOR Inspur/NULL, BIOS 4.1.13 08/01/2016
[34693.333211] Workqueue: cqp_cmpl_wq cqp_compl_worker [irdma]
[34693.333213] Call Trace:
[34693.333220]  dump_stack+0x71/0xab
[34693.333226]  print_address_description+0x6b/0x290
[34693.333238]  ? irdma_sc_ccq_get_cqe_info+0x82f/0x8c0 [irdma]
[34693.333240]  kasan_report+0x14a/0x2b0
[34693.333251]  irdma_sc_ccq_get_cqe_info+0x82f/0x8c0 [irdma]
[34693.333264]  ? irdma_free_cqp_request+0x151/0x1e0 [irdma]
[34693.333274]  irdma_cqp_ce_handler+0x1fb/0x3b0 [irdma]
[34693.333285]  ? irdma_ctrl_init_hw+0x2c20/0x2c20 [irdma]
[34693.333290]  ? __schedule+0x836/0x1570
[34693.333293]  ? strscpy+0x83/0x180
[34693.333296]  process_one_work+0x56a/0x11f0
[34693.333298]  worker_thread+0x8f/0xf40
[34693.333301]  ? __kthread_parkme+0x78/0xf0
[34693.333303]  ? rescuer_thread+0xc50/0xc50
[34693.333305]  kthread+0x2a0/0x390
[34693.333308]  ? kthread_destroy_worker+0x90/0x90
[34693.333310]  ret_from_fork+0x1f/0x40

Fixes: 44d9e52977a1 ("RDMA/irdma: Implement device initialization definitions")
Signed-off-by: Shifeng Li <lishifeng1992@126.com>
Link: https://lore.kernel.org/r/20231121101236.581694-1-lishifeng1992@126.com
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/irdma/hw.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/infiniband/hw/irdma/hw.c b/drivers/infiniband/hw/irdma/hw.c
index 8aa507e87df37..9399d82560c92 100644
--- a/drivers/infiniband/hw/irdma/hw.c
+++ b/drivers/infiniband/hw/irdma/hw.c
@@ -578,9 +578,6 @@ static void irdma_destroy_cqp(struct irdma_pci_f *rf)
 	struct irdma_cqp *cqp = &rf->cqp;
 	int status = 0;
 
-	if (rf->cqp_cmpl_wq)
-		destroy_workqueue(rf->cqp_cmpl_wq);
-
 	status = irdma_sc_cqp_destroy(dev->cqp);
 	if (status)
 		ibdev_dbg(to_ibdev(dev), "ERR: Destroy CQP failed %d\n", status);
@@ -745,6 +742,9 @@ static void irdma_destroy_ccq(struct irdma_pci_f *rf)
 	struct irdma_ccq *ccq = &rf->ccq;
 	int status = 0;
 
+	if (rf->cqp_cmpl_wq)
+		destroy_workqueue(rf->cqp_cmpl_wq);
+
 	if (!rf->reset)
 		status = irdma_sc_ccq_destroy(dev->ccq, 0, true);
 	if (status)
-- 
2.42.0

[PATCH 6.1 080/194] hwmon: (acpi_power_meter) Fix 4.29 MW bug

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Armin Wolf <W_Armin@gmx.de>

[ Upstream commit 1fefca6c57fb928d2131ff365270cbf863d89c88 ]

The ACPI specification says:

"If an error occurs while obtaining the meter reading or if the value
is not available then an Integer with all bits set is returned"

Since the "integer" is 32 bits in case of the ACPI power meter,
userspace will get a power reading of 2^32 * 1000 miliwatts (~4.29 MW)
in case of such an error. This was discovered due to a lm_sensors
bugreport (https://github.com/lm-sensors/lm-sensors/issues/460).
Fix this by returning -ENODATA instead.

Tested-by: <urbinek@gmail.com>
Fixes: de584afa5e18 ("hwmon driver for ACPI 4.0 power meters")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231124182747.13956-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/acpi_power_meter.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/hwmon/acpi_power_meter.c b/drivers/hwmon/acpi_power_meter.c
index 0962c12eba5a0..2147afb725581 100644
--- a/drivers/hwmon/acpi_power_meter.c
+++ b/drivers/hwmon/acpi_power_meter.c
@@ -31,6 +31,7 @@
 #define POWER_METER_CAN_NOTIFY	(1 << 3)
 #define POWER_METER_IS_BATTERY	(1 << 8)
 #define UNKNOWN_HYSTERESIS	0xFFFFFFFF
+#define UNKNOWN_POWER		0xFFFFFFFF
 
 #define METER_NOTIFY_CONFIG	0x80
 #define METER_NOTIFY_TRIP	0x81
@@ -348,6 +349,9 @@ static ssize_t show_power(struct device *dev,
 	update_meter(resource);
 	mutex_unlock(&resource->lock);
 
+	if (resource->power == UNKNOWN_POWER)
+		return -ENODATA;
+
 	return sprintf(buf, "%llu\n", resource->power * 1000);
 }
 
-- 
2.42.0

[PATCH 6.1 081/194] ASoC: codecs: lpass-tx-macro: set active_decimator correct default value

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Neil Armstrong <neil.armstrong@linaro.org>

[ Upstream commit a2f35ed1d237c459100adb0c39bb811d7f170977 ]

The -1 value for active_decimator[dai_id] is considered as "not set",
but at probe the table is initialized a 0, this prevents enabling the
DEC0 Mixer since it will be considered as already set.

Initialize the table entries as -1 to fix tx_macro_tx_mixer_put().

Fixes: 1c6a7f5250ce ("ASoC: codecs: tx-macro: fix active_decimator array")
Fixes: c1057a08af43 ("ASoC: codecs: tx-macro: fix kcontrol put")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231116-topic-sm8x50-upstream-tx-macro-fix-active-decimator-set-v1-1-6edf402f4b6f@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/lpass-tx-macro.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/sound/soc/codecs/lpass-tx-macro.c b/sound/soc/codecs/lpass-tx-macro.c
index 9f59518005a5f..840bbe991cd3a 100644
--- a/sound/soc/codecs/lpass-tx-macro.c
+++ b/sound/soc/codecs/lpass-tx-macro.c
@@ -1871,6 +1871,11 @@ static int tx_macro_probe(struct platform_device *pdev)
 
 	tx->dev = dev;
 
+	/* Set active_decimator default value */
+	tx->active_decimator[TX_MACRO_AIF1_CAP] = -1;
+	tx->active_decimator[TX_MACRO_AIF2_CAP] = -1;
+	tx->active_decimator[TX_MACRO_AIF3_CAP] = -1;
+
 	/* set MCLK and NPL rates */
 	clk_set_rate(tx->mclk, MCLK_FREQ);
 	clk_set_rate(tx->npl, MCLK_FREQ);
-- 
2.42.0

[PATCH 6.1 082/194] hwmon: (nzxt-kraken2) Fix error handling path in kraken2_probe()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 35fe2ad259a3bfca15ab78c8ffb5278cb6149c89 ]

There is no point in calling hid_hw_stop() if hid_hw_start() has failed.
There is no point in calling hid_hw_close() if hid_hw_open() has failed.

Update the error handling path accordingly.

Fixes: 82e3430dfa8c ("hwmon: add driver for NZXT Kraken X42/X52/X62/X72")
Reported-by: Aleksa Savic <savicaleksa83@gmail.com>
Closes: https://lore.kernel.org/all/121470f0-6c1f-418a-844c-7ec2e8a54b8e@gmail.com/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jonas Malaco <jonas@protocubo.io>
Link: https://lore.kernel.org/r/a768e69851a07a1f4e29f270f4e2559063f07343.1701617030.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/nzxt-kraken2.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/nzxt-kraken2.c b/drivers/hwmon/nzxt-kraken2.c
index 89f7ea4f42d47..badbcaf01f90b 100644
--- a/drivers/hwmon/nzxt-kraken2.c
+++ b/drivers/hwmon/nzxt-kraken2.c
@@ -161,13 +161,13 @@ static int kraken2_probe(struct hid_device *hdev,
 	ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
 	if (ret) {
 		hid_err(hdev, "hid hw start failed with %d\n", ret);
-		goto fail_and_stop;
+		return ret;
 	}
 
 	ret = hid_hw_open(hdev);
 	if (ret) {
 		hid_err(hdev, "hid hw open failed with %d\n", ret);
-		goto fail_and_close;
+		goto fail_and_stop;
 	}
 
 	priv->hwmon_dev = hwmon_device_register_with_info(&hdev->dev, "kraken2",
-- 
2.42.0

[PATCH 6.1 083/194] ASoC: wm_adsp: fix memleak in wm_adsp_buffer_populate

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit 29046a78a3c0a1f8fa0427f164caa222f003cf5b ]

When wm_adsp_buffer_read() fails, we should free buf->regions.
Otherwise, the callers of wm_adsp_buffer_populate() will
directly free buf on failure, which makes buf->regions a leaked
memory.

Fixes: a792af69b08f ("ASoC: wm_adsp: Refactor compress stream initialisation")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231204074158.12026-1-dinghao.liu@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm_adsp.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c
index 8a2e9771bb50e..2cfca78f0401f 100644
--- a/sound/soc/codecs/wm_adsp.c
+++ b/sound/soc/codecs/wm_adsp.c
@@ -1401,12 +1401,12 @@ static int wm_adsp_buffer_populate(struct wm_adsp_compr_buf *buf)
 		ret = wm_adsp_buffer_read(buf, caps->region_defs[i].base_offset,
 					  &region->base_addr);
 		if (ret < 0)
-			return ret;
+			goto err;
 
 		ret = wm_adsp_buffer_read(buf, caps->region_defs[i].size_offset,
 					  &offset);
 		if (ret < 0)
-			return ret;
+			goto err;
 
 		region->cumulative_size = offset;
 
@@ -1417,6 +1417,10 @@ static int wm_adsp_buffer_populate(struct wm_adsp_compr_buf *buf)
 	}
 
 	return 0;
+
+err:
+	kfree(buf->regions);
+	return ret;
 }
 
 static void wm_adsp_buffer_clear(struct wm_adsp_compr_buf *buf)
-- 
2.42.0

[PATCH 6.1 084/194] RDMA/core: Fix umem iterator when PAGE_SIZE is greater then HCA pgsz

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mike Marciniszyn <mike.marciniszyn@intel.com>

[ Upstream commit 4fbc3a52cd4d14de3793f4b2c721d7306ea84cf9 ]

64k pages introduce the situation in this diagram when the HCA 4k page
size is being used:

 +-------------------------------------------+ <--- 64k aligned VA
 |                                           |
 |              HCA 4k page                  |
 |                                           |
 +-------------------------------------------+
 |                   o                       |
 |                                           |
 |                   o                       |
 |                                           |
 |                   o                       |
 +-------------------------------------------+
 |                                           |
 |              HCA 4k page                  |
 |                                           |
 +-------------------------------------------+ <--- Live HCA page
 |OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO| <--- offset
 |                                           | <--- VA
 |                MR data                    |
 +-------------------------------------------+
 |                                           |
 |              HCA 4k page                  |
 |                                           |
 +-------------------------------------------+
 |                   o                       |
 |                                           |
 |                   o                       |
 |                                           |
 |                   o                       |
 +-------------------------------------------+
 |                                           |
 |              HCA 4k page                  |
 |                                           |
 +-------------------------------------------+

The VA addresses are coming from rdma-core in this diagram can be
arbitrary, but for 64k pages, the VA may be offset by some number of HCA
4k pages and followed by some number of HCA 4k pages.

The current iterator doesn't account for either the preceding 4k pages or
the following 4k pages.

Fix the issue by extending the ib_block_iter to contain the number of DMA
pages like comment [1] says and by using __sg_advance to start the
iterator at the first live HCA page.

The changes are contained in a parallel set of iterator start and next
functions that are umem aware and specific to umem since there is one user
of the rdma_for_each_block() without umem.

These two fixes prevents the extra pages before and after the user MR
data.

Fix the preceding pages by using the __sq_advance field to start at the
first 4k page containing MR data.

Fix the following pages by saving the number of pgsz blocks in the
iterator state and downcounting on each next.

This fix allows for the elimination of the small page crutch noted in the
Fixes.

Fixes: 10c75ccb54e4 ("RDMA/umem: Prevent small pages from being returned by ib_umem_find_best_pgsz()")
Link: https://lore.kernel.org/r/20231129202143.1434-2-shiraz.saleem@intel.com
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/umem.c | 6 ------
 include/rdma/ib_umem.h         | 9 ++++++++-
 include/rdma/ib_verbs.h        | 1 +
 3 files changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/infiniband/core/umem.c b/drivers/infiniband/core/umem.c
index 957634eceba8f..8ce569bf7525e 100644
--- a/drivers/infiniband/core/umem.c
+++ b/drivers/infiniband/core/umem.c
@@ -96,12 +96,6 @@ unsigned long ib_umem_find_best_pgsz(struct ib_umem *umem,
 		return page_size;
 	}
 
-	/* rdma_for_each_block() has a bug if the page size is smaller than the
-	 * page size used to build the umem. For now prevent smaller page sizes
-	 * from being returned.
-	 */
-	pgsz_bitmap &= GENMASK(BITS_PER_LONG - 1, PAGE_SHIFT);
-
 	/* The best result is the smallest page size that results in the minimum
 	 * number of required pages. Compute the largest page size that could
 	 * work based on VA address bits that don't change.
diff --git a/include/rdma/ib_umem.h b/include/rdma/ib_umem.h
index 92a673cd9b4fd..77b83ea62dd69 100644
--- a/include/rdma/ib_umem.h
+++ b/include/rdma/ib_umem.h
@@ -78,6 +78,13 @@ static inline void __rdma_umem_block_iter_start(struct ib_block_iter *biter,
 {
 	__rdma_block_iter_start(biter, umem->sgt_append.sgt.sgl,
 				umem->sgt_append.sgt.nents, pgsz);
+	biter->__sg_advance = ib_umem_offset(umem) & ~(pgsz - 1);
+	biter->__sg_numblocks = ib_umem_num_dma_blocks(umem, pgsz);
+}
+
+static inline bool __rdma_umem_block_iter_next(struct ib_block_iter *biter)
+{
+	return __rdma_block_iter_next(biter) && biter->__sg_numblocks--;
 }
 
 /**
@@ -93,7 +100,7 @@ static inline void __rdma_umem_block_iter_start(struct ib_block_iter *biter,
  */
 #define rdma_umem_for_each_dma_block(umem, biter, pgsz)                        \
 	for (__rdma_umem_block_iter_start(biter, umem, pgsz);                  \
-	     __rdma_block_iter_next(biter);)
+	     __rdma_umem_block_iter_next(biter);)
 
 #ifdef CONFIG_INFINIBAND_USER_MEM
 
diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
index 975d6e9efbcb4..5582509003264 100644
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -2835,6 +2835,7 @@ struct ib_block_iter {
 	/* internal states */
 	struct scatterlist *__sg;	/* sg holding the current aligned block */
 	dma_addr_t __dma_addr;		/* unaligned DMA address of this block */
+	size_t __sg_numblocks;		/* ib_umem_num_dma_blocks() */
 	unsigned int __sg_nents;	/* number of SG entries */
 	unsigned int __sg_advance;	/* number of bytes to advance in sg in next step */
 	unsigned int __pg_bit;		/* alignment of current block */
-- 
2.42.0

[PATCH 6.1 085/194] RDMA/irdma: Avoid free the non-cqp_request scratch

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shifeng Li <lishifeng@sangfor.com.cn>

[ Upstream commit e3e82fcb79eeb3f1a88a89f676831773caff514a ]

When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a
cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when
removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be
dereferenced as wrong struct in irdma_free_pending_cqp_request().

  PID: 3669   TASK: ffff88aef892c000  CPU: 28  COMMAND: "kworker/28:0"
   #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34
   #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2
   #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f
   #3 [fffffe0000549eb8] do_nmi at ffffffff81079582
   #4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4
      [exception RIP: native_queued_spin_lock_slowpath+1291]
      RIP: ffffffff8127e72b  RSP: ffff88aa841ef778  RFLAGS: 00000046
      RAX: 0000000000000000  RBX: ffff88b01f849700  RCX: ffffffff8127e47e
      RDX: 0000000000000000  RSI: 0000000000000004  RDI: ffffffff83857ec0
      RBP: ffff88afe3e4efc8   R8: ffffed15fc7c9dfa   R9: ffffed15fc7c9dfa
      R10: 0000000000000001  R11: ffffed15fc7c9df9  R12: 0000000000740000
      R13: ffff88b01f849708  R14: 0000000000000003  R15: ffffed1603f092e1
      ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0000
  -- <NMI exception stack> --
   #5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b
   #6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4
   #7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363
   #8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma]
   #9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma]
   #10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma]
   #11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma]
   #12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb
   #13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6
   #14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278
   #15 [ffff88aa841efb88] device_del at ffffffff82179d23
   #16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice]
   #17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice]
   #18 [ffff88aa841efde8] process_one_work at ffffffff811c589a
   #19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff
   #20 [ffff88aa841eff10] kthread at ffffffff811d87a0
   #21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f

Fixes: 44d9e52977a1 ("RDMA/irdma: Implement device initialization definitions")
Link: https://lore.kernel.org/r/20231130081415.891006-1-lishifeng@sangfor.com.cn
Suggested-by: "Ismail, Mustafa" <mustafa.ismail@intel.com>
Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/irdma/hw.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/infiniband/hw/irdma/hw.c b/drivers/infiniband/hw/irdma/hw.c
index 9399d82560c92..311a1138e838d 100644
--- a/drivers/infiniband/hw/irdma/hw.c
+++ b/drivers/infiniband/hw/irdma/hw.c
@@ -1170,7 +1170,6 @@ static int irdma_create_ceq(struct irdma_pci_f *rf, struct irdma_ceq *iwceq,
 	int status;
 	struct irdma_ceq_init_info info = {};
 	struct irdma_sc_dev *dev = &rf->sc_dev;
-	u64 scratch;
 	u32 ceq_size;
 
 	info.ceq_id = ceq_id;
@@ -1191,14 +1190,13 @@ static int irdma_create_ceq(struct irdma_pci_f *rf, struct irdma_ceq *iwceq,
 	iwceq->sc_ceq.ceq_id = ceq_id;
 	info.dev = dev;
 	info.vsi = vsi;
-	scratch = (uintptr_t)&rf->cqp.sc_cqp;
 	status = irdma_sc_ceq_init(&iwceq->sc_ceq, &info);
 	if (!status) {
 		if (dev->ceq_valid)
 			status = irdma_cqp_ceq_cmd(&rf->sc_dev, &iwceq->sc_ceq,
 						   IRDMA_OP_CEQ_CREATE);
 		else
-			status = irdma_sc_cceq_create(&iwceq->sc_ceq, scratch);
+			status = irdma_sc_cceq_create(&iwceq->sc_ceq, 0);
 	}
 
 	if (status) {
-- 
2.42.0

[PATCH 6.1 086/194] drm/bridge: tc358768: select CONFIG_VIDEOMODE_HELPERS

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 26513300978f7285c3e776c144f27ef71be61f57 ]

A dependency on this feature was recently introduced:

x86_64-linux-ld: vmlinux.o: in function `tc358768_bridge_pre_enable':
tc358768.c:(.text+0xbe3dae): undefined reference to `drm_display_mode_to_videomode'

Make sure this is always enabled.

Fixes: e5fb21678136 ("drm/bridge: tc358768: Use struct videomode")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231204072814.968816-1-arnd@kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204072814.968816-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 57946d80b02db..12baf9ba03c96 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -309,6 +309,7 @@ config DRM_TOSHIBA_TC358768
 	select REGMAP_I2C
 	select DRM_PANEL
 	select DRM_MIPI_DSI
+	select VIDEOMODE_HELPERS
 	help
 	  Toshiba TC358768AXBG/TC358778XBG DSI bridge chip driver.
 
-- 
2.42.0

[PATCH 6.1 087/194] arm64: dts: imx8mq: drop usb3-resume-missing-cas from usb

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peng Fan <peng.fan@nxp.com>

[ Upstream commit fcd3f50845be909c9e0f8ac402874a2fb4b09c6c ]

The property is NXP downstream property that there is no user
in upstream, drop it.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230323035531.3808192-2-peng.fan@oss.nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 209043cf092d ("arm64: dts: imx8mp: imx8mq: Add parkmode-disable-ss-quirk on DWC3")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index bf8f02c1535c1..d3b6874a75238 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -1431,7 +1431,6 @@
 			phys = <&usb3_phy0>, <&usb3_phy0>;
 			phy-names = "usb2-phy", "usb3-phy";
 			power-domains = <&pgc_otg1>;
-			usb3-resume-missing-cas;
 			status = "disabled";
 		};
 
@@ -1463,7 +1462,6 @@
 			phys = <&usb3_phy1>, <&usb3_phy1>;
 			phy-names = "usb2-phy", "usb3-phy";
 			power-domains = <&pgc_otg2>;
-			usb3-resume-missing-cas;
 			status = "disabled";
 		};
 
-- 
2.42.0

[PATCH 6.1 088/194] arm64: dts: imx8mp: imx8mq: Add parkmode-disable-ss-quirk on DWC3

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nathan Rossi <nathan.rossi@digi.com>

[ Upstream commit 209043cf092d7b0d4739921b3f11d6d0b451eabf ]

The i.MX8MP and i.MX8MQ devices both use the same DWC3 controller and
are both affected by a known issue with the controller due to specific
behaviour when park mode is enabled in SuperSpeed host mode operation.

Under heavy USB traffic from multiple endpoints the controller will
sometimes incorrectly process transactions such that some transactions
are lost, or the controller may hang when processing transactions. When
the controller hangs it does not recover.

This issue is documented partially within the linux-imx vendor kernel
which references a Synopsys STAR number 9001415732 in commits [1] and
additional details in [2]. Those commits provide some additional
controller internal implementation specifics around the incorrect
behaviour of the SuperSpeed host controller operation when park mode is
enabled.

The summary of this issue is that the host controller can incorrectly
enter/exit park mode such that part of the controller is in a state
which behaves as if in park mode even though it is not. In this state
the controller incorrectly calculates the number of TRBs available which
results in incorrect access of the internal caches causing the overwrite
of pending requests in the cache which should have been processed but
are ignored. This can cause the controller to drop the requests or hang
waiting for the pending state of the dropped requests.

The workaround for this issue is to disable park mode for SuperSpeed
operation of the controller through the GUCTL1[17] bit. This is already
available as a quirk for the DWC3 controller and can be enabled via the
'snps,parkmode-disable-ss-quirk' device tree property.

It is possible to replicate this failure on an i.MX8MP EVK with a USB
Hub connecting 4 SuperSpeed USB flash drives. Performing continuous
small read operations (dd if=/dev/sd... of=/dev/null bs=16) on the block
devices will result in device errors initially and will eventually
result in the controller hanging.

  [13240.896936] xhci-hcd xhci-hcd.0.auto: WARN Event TRB for slot 4 ep 2 with no TDs queued?
  [13240.990708] usb 2-1.3: reset SuperSpeed USB device number 5 using xhci-hcd
  [13241.015582] sd 2:0:0:0: [sdc] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=DRIVER_OK cmd_age=0s
  [13241.025198] sd 2:0:0:0: [sdc] tag#0 CDB: opcode=0x28 28 00 00 00 03 e0 00 01 00 00
  [13241.032949] I/O error, dev sdc, sector 992 op 0x0:(READ) flags 0x80700 phys_seg 25 prio class 2
  [13272.150710] usb 2-1.2: reset SuperSpeed USB device number 4 using xhci-hcd
  [13272.175469] sd 1:0:0:0: [sdb] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=DRIVER_OK cmd_age=31s
  [13272.185365] sd 1:0:0:0: [sdb] tag#0 CDB: opcode=0x28 28 00 00 00 03 e0 00 01 00 00
  [13272.193385] I/O error, dev sdb, sector 992 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2
  [13434.846556] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command
  [13434.854592] xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead
  [13434.862553] xhci-hcd xhci-hcd.0.auto: HC died; cleaning up

[1] https://github.com/nxp-imx/linux-imx/commit/97a5349d936b08cf301730b59e4e8855283f815c
[2] https://github.com/nxp-imx/linux-imx/commit/b4b5cbc5a12d7c3b920d1d7cba0ada3379e4e42b

Fixes: fb8587a2c165 ("arm64: dtsi: imx8mp: add usb nodes")
Fixes: ad37549cb5dc ("arm64: dts: imx8mq: add USB nodes")
Signed-off-by: Nathan Rossi <nathan.rossi@digi.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/imx8mp.dtsi | 2 ++
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 25630a395db56..8c34b3e12a66a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -1301,6 +1301,7 @@
 				phys = <&usb3_phy0>, <&usb3_phy0>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,gfladj-refclk-lpm-sel-quirk;
+				snps,parkmode-disable-ss-quirk;
 			};
 
 		};
@@ -1343,6 +1344,7 @@
 				phys = <&usb3_phy1>, <&usb3_phy1>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,gfladj-refclk-lpm-sel-quirk;
+				snps,parkmode-disable-ss-quirk;
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index d3b6874a75238..e642cb7d54d77 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -1431,6 +1431,7 @@
 			phys = <&usb3_phy0>, <&usb3_phy0>;
 			phy-names = "usb2-phy", "usb3-phy";
 			power-domains = <&pgc_otg1>;
+			snps,parkmode-disable-ss-quirk;
 			status = "disabled";
 		};
 
@@ -1462,6 +1463,7 @@
 			phys = <&usb3_phy1>, <&usb3_phy1>;
 			phy-names = "usb2-phy", "usb3-phy";
 			power-domains = <&pgc_otg2>;
+			snps,parkmode-disable-ss-quirk;
 			status = "disabled";
 		};
 
-- 
2.42.0

[PATCH 6.1 089/194] ARM: dts: imx6ul-pico: Describe the Ethernet PHY clock

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Fabio Estevam <festevam@denx.de>

[ Upstream commit d951f8f5f23a9417b7952f22b33784c73caa1ebb ]

Since commit c7e73b5051d6 ("ARM: imx: mach-imx6ul: remove 14x14 EVK
specific PHY fixup")thet Ethernet PHY is no longer configured via code
in board file.

This caused Ethernet to stop working.

Fix this problem by describing the clocks and clock-names to the
Ethernet PHY node so that the KSZ8081 chip can be clocked correctly.

Fixes: c7e73b5051d6 ("ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6ul-pico.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/imx6ul-pico.dtsi b/arch/arm/boot/dts/imx6ul-pico.dtsi
index 357ffb2f5ad61..dd6790852b0d6 100644
--- a/arch/arm/boot/dts/imx6ul-pico.dtsi
+++ b/arch/arm/boot/dts/imx6ul-pico.dtsi
@@ -121,6 +121,8 @@
 			max-speed = <100>;
 			interrupt-parent = <&gpio5>;
 			interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
 		};
 	};
 };
-- 
2.42.0

[PATCH 6.1 090/194] tracing: Fix a warning when allocating buffered events fails

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Petr Pavlu <petr.pavlu@suse.com>

[ Upstream commit 34209fe83ef8404353f91ab4ea4035dbc9922d04 ]

Function trace_buffered_event_disable() produces an unexpected warning
when the previous call to trace_buffered_event_enable() fails to
allocate pages for buffered events.

The situation can occur as follows:

* The counter trace_buffered_event_ref is at 0.

* The soft mode gets enabled for some event and
  trace_buffered_event_enable() is called. The function increments
  trace_buffered_event_ref to 1 and starts allocating event pages.

* The allocation fails for some page and trace_buffered_event_disable()
  is called for cleanup.

* Function trace_buffered_event_disable() decrements
  trace_buffered_event_ref back to 0, recognizes that it was the last
  use of buffered events and frees all allocated pages.

* The control goes back to trace_buffered_event_enable() which returns.
  The caller of trace_buffered_event_enable() has no information that
  the function actually failed.

* Some time later, the soft mode is disabled for the same event.
  Function trace_buffered_event_disable() is called. It warns on
  "WARN_ON_ONCE(!trace_buffered_event_ref)" and returns.

Buffered events are just an optimization and can handle failures. Make
trace_buffered_event_enable() exit on the first failure and left any
cleanup later to when trace_buffered_event_disable() is called.

Link: https://lore.kernel.org/all/20231127151248.7232-2-petr.pavlu@suse.com/
Link: https://lkml.kernel.org/r/20231205161736.19663-3-petr.pavlu@suse.com

Fixes: 0fc1b09ff1ff ("tracing: Use temp buffer when filtering events")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/trace.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index ddcfc78e93e00..f65d2649fd9bc 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -2707,8 +2707,11 @@ void trace_buffered_event_enable(void)
 	for_each_tracing_cpu(cpu) {
 		page = alloc_pages_node(cpu_to_node(cpu),
 					GFP_KERNEL | __GFP_NORETRY, 0);
-		if (!page)
-			goto failed;
+		/* This is just an optimization and can handle failures */
+		if (!page) {
+			pr_err("Failed to allocate event buffer\n");
+			break;
+		}
 
 		event = page_address(page);
 		memset(event, 0, sizeof(*event));
@@ -2722,10 +2725,6 @@ void trace_buffered_event_enable(void)
 			WARN_ON_ONCE(1);
 		preempt_enable();
 	}
-
-	return;
- failed:
-	trace_buffered_event_disable();
 }
 
 static void enable_trace_buffered_event(void *data)
-- 
2.42.0

[PATCH 6.1 091/194] scsi: be2iscsi: Fix a memleak in beiscsi_init_wrb_handle()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit 235f2b548d7f4ac5931d834f05d3f7f5166a2e72 ]

When an error occurs in the for loop of beiscsi_init_wrb_handle(), we
should free phwi_ctxt->be_wrbq before returning an error code to prevent
potential memleak.

Fixes: a7909b396ba7 ("[SCSI] be2iscsi: Fix dynamic CID allocation Mechanism in driver")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20231123081941.24854-1-dinghao.liu@zju.edu.cn
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/be2iscsi/be_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index 50a577ac3bb42..b6df0d4319072 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -2710,6 +2710,7 @@ static int beiscsi_init_wrb_handle(struct beiscsi_hba *phba)
 		kfree(pwrb_context->pwrb_handle_base);
 		kfree(pwrb_context->pwrb_handle_basestd);
 	}
+	kfree(phwi_ctxt->be_wrbq);
 	return -ENOMEM;
 }
 
-- 
2.42.0

[PATCH 6.1 092/194] ARM: imx: Check return value of devm_kasprintf in imx_mmdc_perf_init

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kunwu Chan <chentao@kylinos.cn>

[ Upstream commit 1c2b1049af3f86545fcc5fae0fc725fb64b3a09e ]

devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.

Release the id allocated in 'mmdc_pmu_init' when 'devm_kasprintf'
return NULL

Suggested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Fixes: e76bdfd7403a ("ARM: imx: Added perf functionality to mmdc driver")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-imx/mmdc.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c
index b9efe9da06e0b..3d76e8c28c51d 100644
--- a/arch/arm/mach-imx/mmdc.c
+++ b/arch/arm/mach-imx/mmdc.c
@@ -502,6 +502,10 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 
 	name = devm_kasprintf(&pdev->dev,
 				GFP_KERNEL, "mmdc%d", ret);
+	if (!name) {
+		ret = -ENOMEM;
+		goto pmu_release_id;
+	}
 
 	pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk;
 	pmu_mmdc->devtype_data = (struct fsl_mmdc_devtype_data *)of_id->data;
@@ -524,9 +528,10 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 
 pmu_register_err:
 	pr_warn("MMDC Perf PMU failed (%d), disabled\n", ret);
-	ida_simple_remove(&mmdc_ida, pmu_mmdc->id);
 	cpuhp_state_remove_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node);
 	hrtimer_cancel(&pmu_mmdc->hrtimer);
+pmu_release_id:
+	ida_simple_remove(&mmdc_ida, pmu_mmdc->id);
 pmu_free:
 	kfree(pmu_mmdc);
 	return ret;
-- 
2.42.0

[PATCH 6.1 093/194] ARM: dts: imx7: Declare timers compatible with fsl,imx6dl-gpt

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Philipp Zabel <p.zabel@pengutronix.de>

[ Upstream commit 397caf68e2d36532054cb14ae8995537f27f8b61 ]

The timer nodes declare compatibility with "fsl,imx6sx-gpt", which
itself is compatible with "fsl,imx6dl-gpt". Switch the fallback
compatible from "fsl,imx6sx-gpt" to "fsl,imx6dl-gpt".

Fixes: 949673450291 ("ARM: dts: add imx7d soc dtsi file")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx7s.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 667568aa4326a..45947707134b8 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -454,7 +454,7 @@
 			};
 
 			gpt1: timer@302d0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
 				reg = <0x302d0000 0x10000>;
 				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_GPT1_ROOT_CLK>,
@@ -463,7 +463,7 @@
 			};
 
 			gpt2: timer@302e0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
 				reg = <0x302e0000 0x10000>;
 				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_GPT2_ROOT_CLK>,
@@ -473,7 +473,7 @@
 			};
 
 			gpt3: timer@302f0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
 				reg = <0x302f0000 0x10000>;
 				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_GPT3_ROOT_CLK>,
@@ -483,7 +483,7 @@
 			};
 
 			gpt4: timer@30300000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
 				reg = <0x30300000 0x10000>;
 				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_GPT4_ROOT_CLK>,
-- 
2.42.0

[PATCH 6.1 094/194] ARM: dts: imx28-xea: Pass the model property

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Fabio Estevam <festevam@denx.de>

[ Upstream commit 63ef8fc9bcee6b73ca445a19a7ac6bd544723c9f ]

Per root-node.yaml, 'model' is a required property.

Pass it to fix the following dt-schema warning:

imx28-xea.dtb: /: 'model' is a required property
	from schema $id: http://devicetree.org/schemas/root-node.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
Fixes: 445ae16ac1c5 ("ARM: dts: imx28: Add DTS description of imx28 based XEA board")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx28-xea.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/imx28-xea.dts b/arch/arm/boot/dts/imx28-xea.dts
index a400c108f66a2..6c5e6856648af 100644
--- a/arch/arm/boot/dts/imx28-xea.dts
+++ b/arch/arm/boot/dts/imx28-xea.dts
@@ -8,6 +8,7 @@
 #include "imx28-lwe.dtsi"
 
 / {
+	model = "Liebherr XEA board";
 	compatible = "lwn,imx28-xea", "fsl,imx28";
 };
 
-- 
2.42.0

[PATCH 6.1 095/194] riscv: fix misaligned access handling of C.SWSP and C.SDSP

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Clément Léger <cleger@rivosinc.com>

[ Upstream commit 22e0eb04837a63af111fae35a92f7577676b9bc8 ]

This is a backport of a fix that was done in OpenSBI: ec0559eb315b
("lib: sbi_misaligned_ldst: Fix handling of C.SWSP and C.SDSP").

Unlike C.LWSP/C.LDSP, these encodings can be used with the zero
register, so checking that the rs2 field is non-zero is unnecessary.

Additionally, the previous check was incorrect since it was checking
the immediate field of the instruction instead of the rs2 field.

Fixes: 956d705dd279 ("riscv: Unaligned load/store handling for M_MODE")
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Link: https://lore.kernel.org/r/20231103090223.702340-1-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/kernel/traps_misaligned.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/riscv/kernel/traps_misaligned.c b/arch/riscv/kernel/traps_misaligned.c
index 378f5b1514435..5348d842c7453 100644
--- a/arch/riscv/kernel/traps_misaligned.c
+++ b/arch/riscv/kernel/traps_misaligned.c
@@ -342,16 +342,14 @@ int handle_misaligned_store(struct pt_regs *regs)
 	} else if ((insn & INSN_MASK_C_SD) == INSN_MATCH_C_SD) {
 		len = 8;
 		val.data_ulong = GET_RS2S(insn, regs);
-	} else if ((insn & INSN_MASK_C_SDSP) == INSN_MATCH_C_SDSP &&
-		   ((insn >> SH_RD) & 0x1f)) {
+	} else if ((insn & INSN_MASK_C_SDSP) == INSN_MATCH_C_SDSP) {
 		len = 8;
 		val.data_ulong = GET_RS2C(insn, regs);
 #endif
 	} else if ((insn & INSN_MASK_C_SW) == INSN_MATCH_C_SW) {
 		len = 4;
 		val.data_ulong = GET_RS2S(insn, regs);
-	} else if ((insn & INSN_MASK_C_SWSP) == INSN_MATCH_C_SWSP &&
-		   ((insn >> SH_RD) & 0x1f)) {
+	} else if ((insn & INSN_MASK_C_SWSP) == INSN_MATCH_C_SWSP) {
 		len = 4;
 		val.data_ulong = GET_RS2C(insn, regs);
 	} else {
-- 
2.42.0

[PATCH 6.1 096/194] md: introduce md_ro_state

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ye Bin <yebin10@huawei.com>

[ Upstream commit f97a5528b21eb175d90dce2df9960c8d08e1be82 ]

Introduce md_ro_state for mddev->ro, so it is easy to understand.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Stable-dep-of: c9f7cb5b2bc9 ("md: don't leave 'MD_RECOVERY_FROZEN' in error path of md_set_readonly()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/md.c | 152 ++++++++++++++++++++++++++----------------------
 1 file changed, 82 insertions(+), 70 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 20f67edae95d0..246af78c05dd1 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -93,6 +93,18 @@ static int remove_and_add_spares(struct mddev *mddev,
 				 struct md_rdev *this);
 static void mddev_detach(struct mddev *mddev);
 
+enum md_ro_state {
+	MD_RDWR,
+	MD_RDONLY,
+	MD_AUTO_READ,
+	MD_MAX_STATE
+};
+
+static bool md_is_rdwr(struct mddev *mddev)
+{
+	return (mddev->ro == MD_RDWR);
+}
+
 /*
  * Default number of read corrections we'll attempt on an rdev
  * before ejecting it from the array. We divide the read error
@@ -444,7 +456,7 @@ static void md_submit_bio(struct bio *bio)
 	if (!bio)
 		return;
 
-	if (mddev->ro == 1 && unlikely(rw == WRITE)) {
+	if (mddev->ro == MD_RDONLY && unlikely(rw == WRITE)) {
 		if (bio_sectors(bio) != 0)
 			bio->bi_status = BLK_STS_IOERR;
 		bio_endio(bio);
@@ -2643,7 +2655,7 @@ void md_update_sb(struct mddev *mddev, int force_change)
 	int any_badblocks_changed = 0;
 	int ret = -1;
 
-	if (mddev->ro) {
+	if (!md_is_rdwr(mddev)) {
 		if (force_change)
 			set_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags);
 		return;
@@ -3909,7 +3921,7 @@ level_store(struct mddev *mddev, const char *buf, size_t len)
 		goto out_unlock;
 	}
 	rv = -EROFS;
-	if (mddev->ro)
+	if (!md_is_rdwr(mddev))
 		goto out_unlock;
 
 	/* request to change the personality.  Need to ensure:
@@ -4115,7 +4127,7 @@ layout_store(struct mddev *mddev, const char *buf, size_t len)
 	if (mddev->pers) {
 		if (mddev->pers->check_reshape == NULL)
 			err = -EBUSY;
-		else if (mddev->ro)
+		else if (!md_is_rdwr(mddev))
 			err = -EROFS;
 		else {
 			mddev->new_layout = n;
@@ -4224,7 +4236,7 @@ chunk_size_store(struct mddev *mddev, const char *buf, size_t len)
 	if (mddev->pers) {
 		if (mddev->pers->check_reshape == NULL)
 			err = -EBUSY;
-		else if (mddev->ro)
+		else if (!md_is_rdwr(mddev))
 			err = -EROFS;
 		else {
 			mddev->new_chunk_sectors = n >> 9;
@@ -4347,13 +4359,13 @@ array_state_show(struct mddev *mddev, char *page)
 
 	if (mddev->pers && !test_bit(MD_NOT_READY, &mddev->flags)) {
 		switch(mddev->ro) {
-		case 1:
+		case MD_RDONLY:
 			st = readonly;
 			break;
-		case 2:
+		case MD_AUTO_READ:
 			st = read_auto;
 			break;
-		case 0:
+		case MD_RDWR:
 			spin_lock(&mddev->lock);
 			if (test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags))
 				st = write_pending;
@@ -4389,7 +4401,8 @@ array_state_store(struct mddev *mddev, const char *buf, size_t len)
 	int err = 0;
 	enum array_state st = match_word(buf, array_states);
 
-	if (mddev->pers && (st == active || st == clean) && mddev->ro != 1) {
+	if (mddev->pers && (st == active || st == clean) &&
+	    mddev->ro != MD_RDONLY) {
 		/* don't take reconfig_mutex when toggling between
 		 * clean and active
 		 */
@@ -4433,23 +4446,23 @@ array_state_store(struct mddev *mddev, const char *buf, size_t len)
 		if (mddev->pers)
 			err = md_set_readonly(mddev, NULL);
 		else {
-			mddev->ro = 1;
+			mddev->ro = MD_RDONLY;
 			set_disk_ro(mddev->gendisk, 1);
 			err = do_md_run(mddev);
 		}
 		break;
 	case read_auto:
 		if (mddev->pers) {
-			if (mddev->ro == 0)
+			if (md_is_rdwr(mddev))
 				err = md_set_readonly(mddev, NULL);
-			else if (mddev->ro == 1)
+			else if (mddev->ro == MD_RDONLY)
 				err = restart_array(mddev);
 			if (err == 0) {
-				mddev->ro = 2;
+				mddev->ro = MD_AUTO_READ;
 				set_disk_ro(mddev->gendisk, 0);
 			}
 		} else {
-			mddev->ro = 2;
+			mddev->ro = MD_AUTO_READ;
 			err = do_md_run(mddev);
 		}
 		break;
@@ -4474,7 +4487,7 @@ array_state_store(struct mddev *mddev, const char *buf, size_t len)
 			wake_up(&mddev->sb_wait);
 			err = 0;
 		} else {
-			mddev->ro = 0;
+			mddev->ro = MD_RDWR;
 			set_disk_ro(mddev->gendisk, 0);
 			err = do_md_run(mddev);
 		}
@@ -4775,7 +4788,7 @@ action_show(struct mddev *mddev, char *page)
 	if (test_bit(MD_RECOVERY_FROZEN, &recovery))
 		type = "frozen";
 	else if (test_bit(MD_RECOVERY_RUNNING, &recovery) ||
-	    (!mddev->ro && test_bit(MD_RECOVERY_NEEDED, &recovery))) {
+	    (md_is_rdwr(mddev) && test_bit(MD_RECOVERY_NEEDED, &recovery))) {
 		if (test_bit(MD_RECOVERY_RESHAPE, &recovery))
 			type = "reshape";
 		else if (test_bit(MD_RECOVERY_SYNC, &recovery)) {
@@ -4861,11 +4874,11 @@ action_store(struct mddev *mddev, const char *page, size_t len)
 		set_bit(MD_RECOVERY_REQUESTED, &mddev->recovery);
 		set_bit(MD_RECOVERY_SYNC, &mddev->recovery);
 	}
-	if (mddev->ro == 2) {
+	if (mddev->ro == MD_AUTO_READ) {
 		/* A write to sync_action is enough to justify
 		 * canceling read-auto mode
 		 */
-		mddev->ro = 0;
+		mddev->ro = MD_RDWR;
 		md_wakeup_thread(mddev->sync_thread);
 	}
 	set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
@@ -5093,8 +5106,7 @@ max_sync_store(struct mddev *mddev, const char *buf, size_t len)
 			goto out_unlock;
 
 		err = -EBUSY;
-		if (max < mddev->resync_max &&
-		    mddev->ro == 0 &&
+		if (max < mddev->resync_max && md_is_rdwr(mddev) &&
 		    test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
 			goto out_unlock;
 
@@ -5829,8 +5841,8 @@ int md_run(struct mddev *mddev)
 			continue;
 		sync_blockdev(rdev->bdev);
 		invalidate_bdev(rdev->bdev);
-		if (mddev->ro != 1 && rdev_read_only(rdev)) {
-			mddev->ro = 1;
+		if (mddev->ro != MD_RDONLY && rdev_read_only(rdev)) {
+			mddev->ro = MD_RDONLY;
 			if (mddev->gendisk)
 				set_disk_ro(mddev->gendisk, 1);
 		}
@@ -5938,8 +5950,8 @@ int md_run(struct mddev *mddev)
 
 	mddev->ok_start_degraded = start_dirty_degraded;
 
-	if (start_readonly && mddev->ro == 0)
-		mddev->ro = 2; /* read-only, but switch on first write */
+	if (start_readonly && md_is_rdwr(mddev))
+		mddev->ro = MD_AUTO_READ; /* read-only, but switch on first write */
 
 	err = pers->run(mddev);
 	if (err)
@@ -6017,8 +6029,8 @@ int md_run(struct mddev *mddev)
 		mddev->sysfs_action = sysfs_get_dirent_safe(mddev->kobj.sd, "sync_action");
 		mddev->sysfs_completed = sysfs_get_dirent_safe(mddev->kobj.sd, "sync_completed");
 		mddev->sysfs_degraded = sysfs_get_dirent_safe(mddev->kobj.sd, "degraded");
-	} else if (mddev->ro == 2) /* auto-readonly not meaningful */
-		mddev->ro = 0;
+	} else if (mddev->ro == MD_AUTO_READ)
+		mddev->ro = MD_RDWR;
 
 	atomic_set(&mddev->max_corr_read_errors,
 		   MD_DEFAULT_MAX_CORRECTED_READ_ERRORS);
@@ -6036,7 +6048,7 @@ int md_run(struct mddev *mddev)
 		if (rdev->raid_disk >= 0)
 			sysfs_link_rdev(mddev, rdev); /* failure here is OK */
 
-	if (mddev->degraded && !mddev->ro)
+	if (mddev->degraded && md_is_rdwr(mddev))
 		/* This ensures that recovering status is reported immediately
 		 * via sysfs - until a lack of spares is confirmed.
 		 */
@@ -6128,7 +6140,7 @@ static int restart_array(struct mddev *mddev)
 		return -ENXIO;
 	if (!mddev->pers)
 		return -EINVAL;
-	if (!mddev->ro)
+	if (md_is_rdwr(mddev))
 		return -EBUSY;
 
 	rcu_read_lock();
@@ -6147,7 +6159,7 @@ static int restart_array(struct mddev *mddev)
 		return -EROFS;
 
 	mddev->safemode = 0;
-	mddev->ro = 0;
+	mddev->ro = MD_RDWR;
 	set_disk_ro(disk, 0);
 	pr_debug("md: %s switched to read-write mode.\n", mdname(mddev));
 	/* Kick recovery or resync if necessary */
@@ -6174,7 +6186,7 @@ static void md_clean(struct mddev *mddev)
 	mddev->clevel[0] = 0;
 	mddev->flags = 0;
 	mddev->sb_flags = 0;
-	mddev->ro = 0;
+	mddev->ro = MD_RDWR;
 	mddev->metadata_type[0] = 0;
 	mddev->chunk_sectors = 0;
 	mddev->ctime = mddev->utime = 0;
@@ -6226,7 +6238,7 @@ static void __md_stop_writes(struct mddev *mddev)
 	}
 	md_bitmap_flush(mddev);
 
-	if (mddev->ro == 0 &&
+	if (md_is_rdwr(mddev) &&
 	    ((!mddev->in_sync && !mddev_is_clustered(mddev)) ||
 	     mddev->sb_flags)) {
 		/* mark array as shutdown cleanly */
@@ -6340,9 +6352,9 @@ static int md_set_readonly(struct mddev *mddev, struct block_device *bdev)
 		__md_stop_writes(mddev);
 
 		err  = -ENXIO;
-		if (mddev->ro==1)
+		if (mddev->ro == MD_RDONLY)
 			goto out;
-		mddev->ro = 1;
+		mddev->ro = MD_RDONLY;
 		set_disk_ro(mddev->gendisk, 1);
 		clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
 		set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
@@ -6399,7 +6411,7 @@ static int do_md_stop(struct mddev *mddev, int mode,
 		return -EBUSY;
 	}
 	if (mddev->pers) {
-		if (mddev->ro)
+		if (!md_is_rdwr(mddev))
 			set_disk_ro(disk, 0);
 
 		__md_stop_writes(mddev);
@@ -6416,8 +6428,8 @@ static int do_md_stop(struct mddev *mddev, int mode,
 		mutex_unlock(&mddev->open_mutex);
 		mddev->changed = 1;
 
-		if (mddev->ro)
-			mddev->ro = 0;
+		if (!md_is_rdwr(mddev))
+			mddev->ro = MD_RDWR;
 	} else
 		mutex_unlock(&mddev->open_mutex);
 	/*
@@ -7232,7 +7244,7 @@ static int update_size(struct mddev *mddev, sector_t num_sectors)
 	if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) ||
 	    mddev->sync_thread)
 		return -EBUSY;
-	if (mddev->ro)
+	if (!md_is_rdwr(mddev))
 		return -EROFS;
 
 	rdev_for_each(rdev, mddev) {
@@ -7262,7 +7274,7 @@ static int update_raid_disks(struct mddev *mddev, int raid_disks)
 	/* change the number of raid disks */
 	if (mddev->pers->check_reshape == NULL)
 		return -EINVAL;
-	if (mddev->ro)
+	if (!md_is_rdwr(mddev))
 		return -EROFS;
 	if (raid_disks <= 0 ||
 	    (mddev->max_disks && raid_disks >= mddev->max_disks))
@@ -7686,26 +7698,25 @@ static int md_ioctl(struct block_device *bdev, fmode_t mode,
 	 * The remaining ioctls are changing the state of the
 	 * superblock, so we do not allow them on read-only arrays.
 	 */
-	if (mddev->ro && mddev->pers) {
-		if (mddev->ro == 2) {
-			mddev->ro = 0;
-			sysfs_notify_dirent_safe(mddev->sysfs_state);
-			set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
-			/* mddev_unlock will wake thread */
-			/* If a device failed while we were read-only, we
-			 * need to make sure the metadata is updated now.
-			 */
-			if (test_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags)) {
-				mddev_unlock(mddev);
-				wait_event(mddev->sb_wait,
-					   !test_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags) &&
-					   !test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags));
-				mddev_lock_nointr(mddev);
-			}
-		} else {
+	if (!md_is_rdwr(mddev) && mddev->pers) {
+		if (mddev->ro != MD_AUTO_READ) {
 			err = -EROFS;
 			goto unlock;
 		}
+		mddev->ro = MD_RDWR;
+		sysfs_notify_dirent_safe(mddev->sysfs_state);
+		set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
+		/* mddev_unlock will wake thread */
+		/* If a device failed while we were read-only, we
+		 * need to make sure the metadata is updated now.
+		 */
+		if (test_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags)) {
+			mddev_unlock(mddev);
+			wait_event(mddev->sb_wait,
+				   !test_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags) &&
+				   !test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags));
+			mddev_lock_nointr(mddev);
+		}
 	}
 
 	switch (cmd) {
@@ -7791,11 +7802,11 @@ static int md_set_read_only(struct block_device *bdev, bool ro)
 	 * Transitioning to read-auto need only happen for arrays that call
 	 * md_write_start and which are not ready for writes yet.
 	 */
-	if (!ro && mddev->ro == 1 && mddev->pers) {
+	if (!ro && mddev->ro == MD_RDONLY && mddev->pers) {
 		err = restart_array(mddev);
 		if (err)
 			goto out_unlock;
-		mddev->ro = 2;
+		mddev->ro = MD_AUTO_READ;
 	}
 
 out_unlock:
@@ -8269,9 +8280,9 @@ static int md_seq_show(struct seq_file *seq, void *v)
 		seq_printf(seq, "%s : %sactive", mdname(mddev),
 						mddev->pers ? "" : "in");
 		if (mddev->pers) {
-			if (mddev->ro==1)
+			if (mddev->ro == MD_RDONLY)
 				seq_printf(seq, " (read-only)");
-			if (mddev->ro==2)
+			if (mddev->ro == MD_AUTO_READ)
 				seq_printf(seq, " (auto-read-only)");
 			seq_printf(seq, " %s", mddev->pers->name);
 		}
@@ -8530,10 +8541,10 @@ bool md_write_start(struct mddev *mddev, struct bio *bi)
 	if (bio_data_dir(bi) != WRITE)
 		return true;
 
-	BUG_ON(mddev->ro == 1);
-	if (mddev->ro == 2) {
+	BUG_ON(mddev->ro == MD_RDONLY);
+	if (mddev->ro == MD_AUTO_READ) {
 		/* need to switch to read/write */
-		mddev->ro = 0;
+		mddev->ro = MD_RDWR;
 		set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
 		md_wakeup_thread(mddev->thread);
 		md_wakeup_thread(mddev->sync_thread);
@@ -8584,7 +8595,7 @@ void md_write_inc(struct mddev *mddev, struct bio *bi)
 {
 	if (bio_data_dir(bi) != WRITE)
 		return;
-	WARN_ON_ONCE(mddev->in_sync || mddev->ro);
+	WARN_ON_ONCE(mddev->in_sync || !md_is_rdwr(mddev));
 	percpu_ref_get(&mddev->writes_pending);
 }
 EXPORT_SYMBOL(md_write_inc);
@@ -8690,7 +8701,7 @@ void md_allow_write(struct mddev *mddev)
 {
 	if (!mddev->pers)
 		return;
-	if (mddev->ro)
+	if (!md_is_rdwr(mddev))
 		return;
 	if (!mddev->pers->sync_request)
 		return;
@@ -8738,7 +8749,7 @@ void md_do_sync(struct md_thread *thread)
 	if (test_bit(MD_RECOVERY_DONE, &mddev->recovery) ||
 	    test_bit(MD_RECOVERY_WAIT, &mddev->recovery))
 		return;
-	if (mddev->ro) {/* never try to sync a read-only array */
+	if (!md_is_rdwr(mddev)) {/* never try to sync a read-only array */
 		set_bit(MD_RECOVERY_INTR, &mddev->recovery);
 		return;
 	}
@@ -9207,9 +9218,9 @@ static int remove_and_add_spares(struct mddev *mddev,
 		if (test_bit(Faulty, &rdev->flags))
 			continue;
 		if (!test_bit(Journal, &rdev->flags)) {
-			if (mddev->ro &&
-			    ! (rdev->saved_raid_disk >= 0 &&
-			       !test_bit(Bitmap_sync, &rdev->flags)))
+			if (!md_is_rdwr(mddev) &&
+			    !(rdev->saved_raid_disk >= 0 &&
+			      !test_bit(Bitmap_sync, &rdev->flags)))
 				continue;
 
 			rdev->recovery_offset = 0;
@@ -9307,7 +9318,8 @@ void md_check_recovery(struct mddev *mddev)
 		flush_signals(current);
 	}
 
-	if (mddev->ro && !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))
+	if (!md_is_rdwr(mddev) &&
+	    !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))
 		return;
 	if ( ! (
 		(mddev->sb_flags & ~ (1<<MD_SB_CHANGE_PENDING)) ||
@@ -9326,7 +9338,7 @@ void md_check_recovery(struct mddev *mddev)
 		if (!mddev->external && mddev->safemode == 1)
 			mddev->safemode = 0;
 
-		if (mddev->ro) {
+		if (!md_is_rdwr(mddev)) {
 			struct md_rdev *rdev;
 			if (!mddev->external && mddev->in_sync)
 				/* 'Blocked' flag not needed as failed devices
-- 
2.42.0

[PATCH 6.1 097/194] md: dont leave MD_RECOVERY_FROZEN in error path of md_set_readonly()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yu Kuai <yukuai3@huawei.com>

[ Upstream commit c9f7cb5b2bc968adcdc686c197ed108f47fd8eb0 ]

If md_set_readonly() failed, the array could still be read-write, however
'MD_RECOVERY_FROZEN' could still be set, which leave the array in an
abnormal state that sync or recovery can't continue anymore.
Hence make sure the flag is cleared after md_set_readonly() returns.

Fixes: 88724bfa68be ("md: wait for pending superblock updates before switching to read-only")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231205094215.1824240-3-yukuai1@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/md.c | 24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 246af78c05dd1..0c2801d770901 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -6314,6 +6314,9 @@ static int md_set_readonly(struct mddev *mddev, struct block_device *bdev)
 	int err = 0;
 	int did_freeze = 0;
 
+	if (mddev->external && test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags))
+		return -EBUSY;
+
 	if (!test_bit(MD_RECOVERY_FROZEN, &mddev->recovery)) {
 		did_freeze = 1;
 		set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
@@ -6326,8 +6329,6 @@ static int md_set_readonly(struct mddev *mddev, struct block_device *bdev)
 		 * which will now never happen */
 		wake_up_process(mddev->sync_thread->tsk);
 
-	if (mddev->external && test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags))
-		return -EBUSY;
 	mddev_unlock(mddev);
 	wait_event(resync_wait, !test_bit(MD_RECOVERY_RUNNING,
 					  &mddev->recovery));
@@ -6340,29 +6341,30 @@ static int md_set_readonly(struct mddev *mddev, struct block_device *bdev)
 	    mddev->sync_thread ||
 	    test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) {
 		pr_warn("md: %s still in use.\n",mdname(mddev));
-		if (did_freeze) {
-			clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
-			set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
-			md_wakeup_thread(mddev->thread);
-		}
 		err = -EBUSY;
 		goto out;
 	}
+
 	if (mddev->pers) {
 		__md_stop_writes(mddev);
 
-		err  = -ENXIO;
-		if (mddev->ro == MD_RDONLY)
+		if (mddev->ro == MD_RDONLY) {
+			err  = -ENXIO;
 			goto out;
+		}
+
 		mddev->ro = MD_RDONLY;
 		set_disk_ro(mddev->gendisk, 1);
+	}
+
+out:
+	if ((mddev->pers && !err) || did_freeze) {
 		clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
 		set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
 		md_wakeup_thread(mddev->thread);
 		sysfs_notify_dirent_safe(mddev->sysfs_state);
-		err = 0;
 	}
-out:
+
 	mutex_unlock(&mddev->open_mutex);
 	return err;
 }
-- 
2.42.0

[PATCH 6.1 098/194] iommu: Avoid more races around device probe

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Robin Murphy <robin.murphy@arm.com>

commit a2e7e59a94269484a83386972ca07c22fd188854 upstream.

It turns out there are more subtle races beyond just the main part of
__iommu_probe_device() itself running in parallel - the dev_iommu_free()
on the way out of an unsuccessful probe can still manage to trip up
concurrent accesses to a device's fwspec. Thus, extend the scope of
iommu_probe_device_lock() to also serialise fwspec creation and initial
retrieval.

Reported-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Link: https://lore.kernel.org/linux-iommu/e2e20e1c-6450-4ac5-9804-b0000acdf7de@quicinc.com/
Fixes: 01657bc14a39 ("iommu: Avoid races around device probe")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Tested-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/16f433658661d7cadfea51e7c65da95826112a2b.1700071477.git.robin.murphy@arm.com
Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/scan.c      |    7 ++++++-
 drivers/iommu/iommu.c    |   19 +++++++++----------
 drivers/iommu/of_iommu.c |   12 +++++++++---
 include/linux/iommu.h    |    1 +
 4 files changed, 25 insertions(+), 14 deletions(-)

--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1563,17 +1563,22 @@ static const struct iommu_ops *acpi_iomm
 	int err;
 	const struct iommu_ops *ops;
 
+	/* Serialise to make dev->iommu stable under our potential fwspec */
+	mutex_lock(&iommu_probe_device_lock);
 	/*
 	 * If we already translated the fwspec there is nothing left to do,
 	 * return the iommu_ops.
 	 */
 	ops = acpi_iommu_fwspec_ops(dev);
-	if (ops)
+	if (ops) {
+		mutex_unlock(&iommu_probe_device_lock);
 		return ops;
+	}
 
 	err = iort_iommu_configure_id(dev, id_in);
 	if (err && err != -EPROBE_DEFER)
 		err = viot_iommu_configure(dev);
+	mutex_unlock(&iommu_probe_device_lock);
 
 	/*
 	 * If we have reason to believe the IOMMU driver missed the initial
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -278,12 +278,13 @@ static void dev_iommu_free(struct device
 	kfree(param);
 }
 
+DEFINE_MUTEX(iommu_probe_device_lock);
+
 static int __iommu_probe_device(struct device *dev, struct list_head *group_list)
 {
 	const struct iommu_ops *ops = dev->bus->iommu_ops;
 	struct iommu_device *iommu_dev;
 	struct iommu_group *group;
-	static DEFINE_MUTEX(iommu_probe_device_lock);
 	int ret;
 
 	if (!ops)
@@ -295,11 +296,9 @@ static int __iommu_probe_device(struct d
 	 * probably be able to use device_lock() here to minimise the scope,
 	 * but for now enforcing a simple global ordering is fine.
 	 */
-	mutex_lock(&iommu_probe_device_lock);
-	if (!dev_iommu_get(dev)) {
-		ret = -ENOMEM;
-		goto err_unlock;
-	}
+	lockdep_assert_held(&iommu_probe_device_lock);
+	if (!dev_iommu_get(dev))
+		return -ENOMEM;
 
 	if (!try_module_get(ops->owner)) {
 		ret = -EINVAL;
@@ -326,7 +325,6 @@ static int __iommu_probe_device(struct d
 	mutex_unlock(&group->mutex);
 	iommu_group_put(group);
 
-	mutex_unlock(&iommu_probe_device_lock);
 	iommu_device_link(iommu_dev, dev);
 
 	return 0;
@@ -341,9 +339,6 @@ out_module_put:
 err_free:
 	dev_iommu_free(dev);
 
-err_unlock:
-	mutex_unlock(&iommu_probe_device_lock);
-
 	return ret;
 }
 
@@ -353,7 +348,9 @@ int iommu_probe_device(struct device *de
 	struct iommu_group *group;
 	int ret;
 
+	mutex_lock(&iommu_probe_device_lock);
 	ret = __iommu_probe_device(dev, NULL);
+	mutex_unlock(&iommu_probe_device_lock);
 	if (ret)
 		goto err_out;
 
@@ -1684,7 +1681,9 @@ static int probe_iommu_group(struct devi
 		return 0;
 	}
 
+	mutex_lock(&iommu_probe_device_lock);
 	ret = __iommu_probe_device(dev, group_list);
+	mutex_unlock(&iommu_probe_device_lock);
 	if (ret == -ENODEV)
 		ret = 0;
 
--- a/drivers/iommu/of_iommu.c
+++ b/drivers/iommu/of_iommu.c
@@ -112,16 +112,20 @@ const struct iommu_ops *of_iommu_configu
 					   const u32 *id)
 {
 	const struct iommu_ops *ops = NULL;
-	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+	struct iommu_fwspec *fwspec;
 	int err = NO_IOMMU;
 
 	if (!master_np)
 		return NULL;
 
+	/* Serialise to make dev->iommu stable under our potential fwspec */
+	mutex_lock(&iommu_probe_device_lock);
+	fwspec = dev_iommu_fwspec_get(dev);
 	if (fwspec) {
-		if (fwspec->ops)
+		if (fwspec->ops) {
+			mutex_unlock(&iommu_probe_device_lock);
 			return fwspec->ops;
-
+		}
 		/* In the deferred case, start again from scratch */
 		iommu_fwspec_free(dev);
 	}
@@ -155,6 +159,8 @@ const struct iommu_ops *of_iommu_configu
 		fwspec = dev_iommu_fwspec_get(dev);
 		ops    = fwspec->ops;
 	}
+	mutex_unlock(&iommu_probe_device_lock);
+
 	/*
 	 * If we have reason to believe the IOMMU driver missed the initial
 	 * probe for dev, replay it to get things in order.
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -657,6 +657,7 @@ static inline void dev_iommu_priv_set(st
 	dev->iommu->priv = priv;
 }
 
+extern struct mutex iommu_probe_device_lock;
 int iommu_probe_device(struct device *dev);
 void iommu_release_device(struct device *dev);
 

[PATCH 6.1 099/194] rethook: Use __rcu pointer for rethook::handler

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Masami Hiramatsu (Google) <mhiramat@kernel.org>

commit a1461f1fd6cfdc4b8917c9d4a91e92605d1f28dc upstream.

Since the rethook::handler is an RCU-maganged pointer so that it will
notice readers the rethook is stopped (unregistered) or not, it should
be an __rcu pointer and use appropriate functions to be accessed. This
will use appropriate memory barrier when accessing it. OTOH,
rethook::data is never changed, so we don't need to check it in
get_kretprobe().

NOTE: To avoid sparse warning, rethook::handler is defined by a raw
function pointer type with __rcu instead of rethook_handler_t.

Link: https://lore.kernel.org/all/170126066201.398836.837498688669005979.stgit@devnote2/

Fixes: 54ecbe6f1ed5 ("rethook: Add a generic return hook")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311241808.rv9ceuAh-lkp@intel.com/
Tested-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/kprobes.h |    6 ++----
 include/linux/rethook.h |    7 ++++++-
 kernel/trace/rethook.c  |   23 ++++++++++++++---------
 3 files changed, 22 insertions(+), 14 deletions(-)

--- a/include/linux/kprobes.h
+++ b/include/linux/kprobes.h
@@ -202,10 +202,8 @@ extern int arch_trampoline_kprobe(struct
 #ifdef CONFIG_KRETPROBE_ON_RETHOOK
 static nokprobe_inline struct kretprobe *get_kretprobe(struct kretprobe_instance *ri)
 {
-	RCU_LOCKDEP_WARN(!rcu_read_lock_any_held(),
-		"Kretprobe is accessed from instance under preemptive context");
-
-	return (struct kretprobe *)READ_ONCE(ri->node.rethook->data);
+	/* rethook::data is non-changed field, so that you can access it freely. */
+	return (struct kretprobe *)ri->node.rethook->data;
 }
 static nokprobe_inline unsigned long get_kretprobe_retaddr(struct kretprobe_instance *ri)
 {
--- a/include/linux/rethook.h
+++ b/include/linux/rethook.h
@@ -29,7 +29,12 @@ typedef void (*rethook_handler_t) (struc
  */
 struct rethook {
 	void			*data;
-	rethook_handler_t	handler;
+	/*
+	 * To avoid sparse warnings, this uses a raw function pointer with
+	 * __rcu, instead of rethook_handler_t. But this must be same as
+	 * rethook_handler_t.
+	 */
+	void (__rcu *handler) (struct rethook_node *, void *, struct pt_regs *);
 	struct freelist_head	pool;
 	refcount_t		ref;
 	struct rcu_head		rcu;
--- a/kernel/trace/rethook.c
+++ b/kernel/trace/rethook.c
@@ -63,7 +63,7 @@ static void rethook_free_rcu(struct rcu_
  */
 void rethook_stop(struct rethook *rh)
 {
-	WRITE_ONCE(rh->handler, NULL);
+	rcu_assign_pointer(rh->handler, NULL);
 }
 
 /**
@@ -78,11 +78,17 @@ void rethook_stop(struct rethook *rh)
  */
 void rethook_free(struct rethook *rh)
 {
-	WRITE_ONCE(rh->handler, NULL);
+	rethook_stop(rh);
 
 	call_rcu(&rh->rcu, rethook_free_rcu);
 }
 
+static inline rethook_handler_t rethook_get_handler(struct rethook *rh)
+{
+	return (rethook_handler_t)rcu_dereference_check(rh->handler,
+							rcu_read_lock_any_held());
+}
+
 /**
  * rethook_alloc() - Allocate struct rethook.
  * @data: a data to pass the @handler when hooking the return.
@@ -102,7 +108,7 @@ struct rethook *rethook_alloc(void *data
 	}
 
 	rh->data = data;
-	rh->handler = handler;
+	rcu_assign_pointer(rh->handler, handler);
 	rh->pool.head = NULL;
 	refcount_set(&rh->ref, 1);
 
@@ -142,9 +148,10 @@ static void free_rethook_node_rcu(struct
  */
 void rethook_recycle(struct rethook_node *node)
 {
-	lockdep_assert_preemption_disabled();
+	rethook_handler_t handler;
 
-	if (likely(READ_ONCE(node->rethook->handler)))
+	handler = rethook_get_handler(node->rethook);
+	if (likely(handler))
 		freelist_add(&node->freelist, &node->rethook->pool);
 	else
 		call_rcu(&node->rcu, free_rethook_node_rcu);
@@ -160,11 +167,9 @@ NOKPROBE_SYMBOL(rethook_recycle);
  */
 struct rethook_node *rethook_try_get(struct rethook *rh)
 {
-	rethook_handler_t handler = READ_ONCE(rh->handler);
+	rethook_handler_t handler = rethook_get_handler(rh);
 	struct freelist_node *fn;
 
-	lockdep_assert_preemption_disabled();
-
 	/* Check whether @rh is going to be freed. */
 	if (unlikely(!handler))
 		return NULL;
@@ -312,7 +317,7 @@ unsigned long rethook_trampoline_handler
 		rhn = container_of(first, struct rethook_node, llist);
 		if (WARN_ON_ONCE(rhn->frame != frame))
 			break;
-		handler = READ_ONCE(rhn->rethook->handler);
+		handler = rethook_get_handler(rhn->rethook);
 		if (handler)
 			handler(rhn, rhn->rethook->data, regs);
 

[PATCH 6.1 100/194] kprobes: consistent rcu api usage for kretprobe holder

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: JP Kobryn <inwardvessel@gmail.com>

commit d839a656d0f3caca9f96e9bf912fd394ac6a11bc upstream.

It seems that the pointer-to-kretprobe "rp" within the kretprobe_holder is
RCU-managed, based on the (non-rethook) implementation of get_kretprobe().
The thought behind this patch is to make use of the RCU API where possible
when accessing this pointer so that the needed barriers are always in place
and to self-document the code.

The __rcu annotation to "rp" allows for sparse RCU checking. Plain writes
done to the "rp" pointer are changed to make use of the RCU macro for
assignment. For the single read, the implementation of get_kretprobe()
is simplified by making use of an RCU macro which accomplishes the same,
but note that the log warning text will be more generic.

I did find that there is a difference in assembly generated between the
usage of the RCU macros vs without. For example, on arm64, when using
rcu_assign_pointer(), the corresponding store instruction is a
store-release (STLR) which has an implicit barrier. When normal assignment
is done, a regular store (STR) is found. In the macro case, this seems to
be a result of rcu_assign_pointer() using smp_store_release() when the
value to write is not NULL.

Link: https://lore.kernel.org/all/20231122132058.3359-1-inwardvessel@gmail.com/

Fixes: d741bf41d7c7 ("kprobes: Remove kretprobe hash")
Cc: stable@vger.kernel.org
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/kprobes.h |    7 ++-----
 kernel/kprobes.c        |    4 ++--
 2 files changed, 4 insertions(+), 7 deletions(-)

--- a/include/linux/kprobes.h
+++ b/include/linux/kprobes.h
@@ -140,7 +140,7 @@ static inline bool kprobe_ftrace(struct
  *
  */
 struct kretprobe_holder {
-	struct kretprobe	*rp;
+	struct kretprobe __rcu *rp;
 	refcount_t		ref;
 };
 
@@ -248,10 +248,7 @@ unsigned long kretprobe_trampoline_handl
 
 static nokprobe_inline struct kretprobe *get_kretprobe(struct kretprobe_instance *ri)
 {
-	RCU_LOCKDEP_WARN(!rcu_read_lock_any_held(),
-		"Kretprobe is accessed from instance under preemptive context");
-
-	return READ_ONCE(ri->rph->rp);
+	return rcu_dereference_check(ri->rph->rp, rcu_read_lock_any_held());
 }
 
 static nokprobe_inline unsigned long get_kretprobe_retaddr(struct kretprobe_instance *ri)
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -2253,7 +2253,7 @@ int register_kretprobe(struct kretprobe
 	if (!rp->rph)
 		return -ENOMEM;
 
-	rp->rph->rp = rp;
+	rcu_assign_pointer(rp->rph->rp, rp);
 	for (i = 0; i < rp->maxactive; i++) {
 		inst = kzalloc(sizeof(struct kretprobe_instance) +
 			       rp->data_size, GFP_KERNEL);
@@ -2314,7 +2314,7 @@ void unregister_kretprobes(struct kretpr
 #ifdef CONFIG_KRETPROBE_ON_RETHOOK
 		rethook_free(rps[i]->rh);
 #else
-		rps[i]->rph->rp = NULL;
+		rcu_assign_pointer(rps[i]->rph->rp, NULL);
 #endif
 	}
 	mutex_unlock(&kprobe_mutex);

[PATCH 6.1 101/194] ASoC: amd: yc: Fix non-functional mic on ASUS E1504FA

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Malcolm Hart <malcolm@5harts.com>

commit b24e3590c94ab0aba6e455996b502a83baa5c31c upstream.

This patch adds ASUSTeK COMPUTER INC  "E1504FA" to the quirks file acp6x-mach.c
to enable microphone array on ASUS Vivobook GO 15.
I have this laptop and can confirm that the patch succeeds in enabling the
microphone array.

Signed-off-by: Malcolm Hart <malcolm@5harts.com>
Cc: stable@vger.kernel.org
Rule: add
Link: https://lore.kernel.org/stable/875y1nt1bx.fsf%405harts.com
Link: https://lore.kernel.org/r/871qcbszh0.fsf@5harts.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/amd/yc/acp6x-mach.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/sound/soc/amd/yc/acp6x-mach.c
+++ b/sound/soc/amd/yc/acp6x-mach.c
@@ -286,6 +286,13 @@ static const struct dmi_system_id yc_acp
 	{
 		.driver_data = &acp6x_card,
 		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "E1504FA"),
+		}
+	},
+	{
+		.driver_data = &acp6x_card,
+		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "TIMI"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Redmi Book Pro 15 2022"),
 		}

[PATCH 6.1 102/194] io_uring/af_unix: disable sending io_uring over sockets

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pavel Begunkov <asml.silence@gmail.com>

commit 705318a99a138c29a512a72c3e0043b3cd7f55f4 upstream.

File reference cycles have caused lots of problems for io_uring
in the past, and it still doesn't work exactly right and races with
unix_stream_read_generic(). The safest fix would be to completely
disallow sending io_uring files via sockets via SCM_RIGHT, so there
are no possible cycles invloving registered files and thus rendering
SCM accounting on the io_uring side unnecessary.

Cc:  <stable@vger.kernel.org>
Fixes: 0091bfc81741b ("io_uring/af_unix: defer registered files gc to io_uring release")
Reported-and-suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c716c88321939156909cfa1bd8b0faaf1c804103.1701868795.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 io_uring/rsrc.h |    7 -------
 net/core/scm.c  |    6 ++++++
 2 files changed, 6 insertions(+), 7 deletions(-)

--- a/io_uring/rsrc.h
+++ b/io_uring/rsrc.h
@@ -79,17 +79,10 @@ int io_sqe_files_register(struct io_ring
 
 int __io_scm_file_account(struct io_ring_ctx *ctx, struct file *file);
 
-#if defined(CONFIG_UNIX)
-static inline bool io_file_need_scm(struct file *filp)
-{
-	return !!unix_get_socket(filp);
-}
-#else
 static inline bool io_file_need_scm(struct file *filp)
 {
 	return false;
 }
-#endif
 
 static inline int io_scm_file_account(struct io_ring_ctx *ctx,
 				      struct file *file)
--- a/net/core/scm.c
+++ b/net/core/scm.c
@@ -26,6 +26,7 @@
 #include <linux/nsproxy.h>
 #include <linux/slab.h>
 #include <linux/errqueue.h>
+#include <linux/io_uring.h>
 
 #include <linux/uaccess.h>
 
@@ -103,6 +104,11 @@ static int scm_fp_copy(struct cmsghdr *c
 
 		if (fd < 0 || !(file = fget_raw(fd)))
 			return -EBADF;
+		/* don't allow io_uring files */
+		if (io_uring_get_socket(file)) {
+			fput(file);
+			return -EINVAL;
+		}
 		*fpp++ = file;
 		fpl->count++;
 	}

[PATCH 6.1 103/194] nvme-pci: Add sleep quirk for Kingston drives

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Georg Gottleuber <ggo@tuxedocomputers.com>

commit 107b4e063d78c300b21e2d5291b1aa94c514ea5b upstream.

Some Kingston NV1 and A2000 are wasting a lot of power on specific TUXEDO
platforms in s2idle sleep if 'Simple Suspend' is used.

This patch applies a new quirk 'Force No Simple Suspend' to achieve a
low power sleep without 'Simple Suspend'.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/nvme/host/nvme.h |    5 +++++
 drivers/nvme/host/pci.c  |   16 +++++++++++++++-
 2 files changed, 20 insertions(+), 1 deletion(-)

--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -154,6 +154,11 @@ enum nvme_quirks {
 	 * No temperature thresholds for channels other than 0 (Composite).
 	 */
 	NVME_QUIRK_NO_SECONDARY_TEMP_THRESH	= (1 << 19),
+
+	/*
+	 * Disables simple suspend/resume path.
+	 */
+	NVME_QUIRK_FORCE_NO_SIMPLE_SUSPEND	= (1 << 20),
 };
 
 /*
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -3093,6 +3093,18 @@ static unsigned long check_vendor_combin
 		if ((dmi_match(DMI_BOARD_VENDOR, "LENOVO")) &&
 		     dmi_match(DMI_BOARD_NAME, "LNVNB161216"))
 			return NVME_QUIRK_SIMPLE_SUSPEND;
+	} else if (pdev->vendor == 0x2646 && (pdev->device == 0x2263 ||
+		   pdev->device == 0x500f)) {
+		/*
+		 * Exclude some Kingston NV1 and A2000 devices from
+		 * NVME_QUIRK_SIMPLE_SUSPEND. Do a full suspend to save a
+		 * lot fo energy with s2idle sleep on some TUXEDO platforms.
+		 */
+		if (dmi_match(DMI_BOARD_NAME, "NS5X_NS7XAU") ||
+		    dmi_match(DMI_BOARD_NAME, "NS5x_7xAU") ||
+		    dmi_match(DMI_BOARD_NAME, "NS5x_7xPU") ||
+		    dmi_match(DMI_BOARD_NAME, "PH4PRX1_PH6PRX1"))
+			return NVME_QUIRK_FORCE_NO_SIMPLE_SUSPEND;
 	}
 
 	return 0;
@@ -3133,7 +3145,9 @@ static struct nvme_dev *nvme_pci_alloc_d
 	dev->dev = get_device(&pdev->dev);
 
 	quirks |= check_vendor_combination_bug(pdev);
-	if (!noacpi && acpi_storage_d3(&pdev->dev)) {
+	if (!noacpi &&
+	    !(quirks & NVME_QUIRK_FORCE_NO_SIMPLE_SUSPEND) &&
+	    acpi_storage_d3(&pdev->dev)) {
 		/*
 		 * Some systems use a bios work around to ask for D3 on
 		 * platforms that support kernel managed suspend.

[PATCH 6.1 104/194] io_uring: fix mutex_unlock with unreferenced ctx

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pavel Begunkov <asml.silence@gmail.com>

commit f7b32e785042d2357c5abc23ca6db1b92c91a070 upstream.

Callers of mutex_unlock() have to make sure that the mutex stays alive
for the whole duration of the function call. For io_uring that means
that the following pattern is not valid unless we ensure that the
context outlives the mutex_unlock() call.

mutex_lock(&ctx->uring_lock);
req_put(req); // typically via io_req_task_submit()
mutex_unlock(&ctx->uring_lock);

Most contexts are fine: io-wq pins requests, syscalls hold the file,
task works are taking ctx references and so on. However, the task work
fallback path doesn't follow the rule.

Cc:  <stable@vger.kernel.org>
Fixes: 04fc6c802d ("io_uring: save ctx put/get for task_work submit")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/io-uring/CAG48ez3xSoYb+45f1RLtktROJrpiDQ1otNvdR+YLQf7m+Krj5Q@mail.gmail.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 io_uring/io_uring.c |    9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -1377,6 +1377,7 @@ static __cold void io_iopoll_try_reap_ev
 	if (!(ctx->flags & IORING_SETUP_IOPOLL))
 		return;
 
+	percpu_ref_get(&ctx->refs);
 	mutex_lock(&ctx->uring_lock);
 	while (!wq_list_empty(&ctx->iopoll_list)) {
 		/* let it sleep and repeat later if can't complete a request */
@@ -1394,6 +1395,7 @@ static __cold void io_iopoll_try_reap_ev
 		}
 	}
 	mutex_unlock(&ctx->uring_lock);
+	percpu_ref_put(&ctx->refs);
 }
 
 static int io_iopoll_check(struct io_ring_ctx *ctx, long min)
@@ -2800,12 +2802,7 @@ static __cold void io_ring_exit_work(str
 	init_completion(&exit.completion);
 	init_task_work(&exit.task_work, io_tctx_exit_cb);
 	exit.ctx = ctx;
-	/*
-	 * Some may use context even when all refs and requests have been put,
-	 * and they are free to do so while still holding uring_lock or
-	 * completion_lock, see io_req_task_submit(). Apart from other work,
-	 * this lock/unlock section also waits them to finish.
-	 */
+
 	mutex_lock(&ctx->uring_lock);
 	while (!list_empty(&ctx->tctx_list)) {
 		WARN_ON_ONCE(time_after(jiffies, timeout));

[PATCH 6.1 105/194] ALSA: usb-audio: Add Pioneer DJM-450 mixer controls

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sarah Grant <s@srd.tw>

commit bbb8e71965c3737bdc691afd803a34bfd61cfbeb upstream.

These values mirror those of the Pioneer DJM-250MK2 as the channel layout
appears identical based on my observations. This duplication could be removed in
later contributions if desired.

Signed-off-by: Sarah Grant <s@srd.tw>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231201181654.5058-1-s@srd.tw
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/mixer_quirks.c |   30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -2978,6 +2978,7 @@ static int snd_bbfpro_controls_create(st
 #define SND_DJM_850_IDX		0x2
 #define SND_DJM_900NXS2_IDX	0x3
 #define SND_DJM_750MK2_IDX	0x4
+#define SND_DJM_450_IDX		0x5
 
 
 #define SND_DJM_CTL(_name, suffix, _default_value, _windex) { \
@@ -3108,6 +3109,31 @@ static const struct snd_djm_ctl snd_djm_
 };
 
 
+// DJM-450
+static const u16 snd_djm_opts_450_cap1[] = {
+	0x0103, 0x0100, 0x0106, 0x0107, 0x0108, 0x0109, 0x010d, 0x010a };
+
+static const u16 snd_djm_opts_450_cap2[] = {
+	0x0203, 0x0200, 0x0206, 0x0207, 0x0208, 0x0209, 0x020d, 0x020a };
+
+static const u16 snd_djm_opts_450_cap3[] = {
+	0x030a, 0x0311, 0x0312, 0x0307, 0x0308, 0x0309, 0x030d };
+
+static const u16 snd_djm_opts_450_pb1[] = { 0x0100, 0x0101, 0x0104 };
+static const u16 snd_djm_opts_450_pb2[] = { 0x0200, 0x0201, 0x0204 };
+static const u16 snd_djm_opts_450_pb3[] = { 0x0300, 0x0301, 0x0304 };
+
+static const struct snd_djm_ctl snd_djm_ctls_450[] = {
+	SND_DJM_CTL("Capture Level", cap_level, 0, SND_DJM_WINDEX_CAPLVL),
+	SND_DJM_CTL("Ch1 Input",   450_cap1, 2, SND_DJM_WINDEX_CAP),
+	SND_DJM_CTL("Ch2 Input",   450_cap2, 2, SND_DJM_WINDEX_CAP),
+	SND_DJM_CTL("Ch3 Input",   450_cap3, 0, SND_DJM_WINDEX_CAP),
+	SND_DJM_CTL("Ch1 Output",   450_pb1, 0, SND_DJM_WINDEX_PB),
+	SND_DJM_CTL("Ch2 Output",   450_pb2, 1, SND_DJM_WINDEX_PB),
+	SND_DJM_CTL("Ch3 Output",   450_pb3, 2, SND_DJM_WINDEX_PB)
+};
+
+
 // DJM-750
 static const u16 snd_djm_opts_750_cap1[] = {
 	0x0101, 0x0103, 0x0106, 0x0107, 0x0108, 0x0109, 0x010a, 0x010f };
@@ -3203,6 +3229,7 @@ static const struct snd_djm_device snd_d
 	[SND_DJM_850_IDX] = SND_DJM_DEVICE(850),
 	[SND_DJM_900NXS2_IDX] = SND_DJM_DEVICE(900nxs2),
 	[SND_DJM_750MK2_IDX] = SND_DJM_DEVICE(750mk2),
+	[SND_DJM_450_IDX] = SND_DJM_DEVICE(450),
 };
 
 
@@ -3449,6 +3476,9 @@ int snd_usb_mixer_apply_create_quirk(str
 	case USB_ID(0x2b73, 0x0017): /* Pioneer DJ DJM-250MK2 */
 		err = snd_djm_controls_create(mixer, SND_DJM_250MK2_IDX);
 		break;
+	case USB_ID(0x2b73, 0x0013): /* Pioneer DJ DJM-450 */
+		err = snd_djm_controls_create(mixer, SND_DJM_450_IDX);
+		break;
 	case USB_ID(0x08e4, 0x017f): /* Pioneer DJ DJM-750 */
 		err = snd_djm_controls_create(mixer, SND_DJM_750_IDX);
 		break;

[PATCH 6.1 106/194] ALSA: pcm: fix out-of-bounds in snd_pcm_state_names

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jason Zhang <jason.zhang@rock-chips.com>

commit 2b3a7a302c9804e463f2ea5b54dc3a6ad106a344 upstream.

The pcm state can be SNDRV_PCM_STATE_DISCONNECTED at disconnect
callback, and there is not an entry of SNDRV_PCM_STATE_DISCONNECTED
in snd_pcm_state_names.

This patch adds the missing entry to resolve this issue.

cat /proc/asound/card2/pcm0p/sub0/status
That results in stack traces like the following:

[   99.702732][ T5171] Unexpected kernel BRK exception at EL1
[   99.702774][ T5171] Internal error: BRK handler: f2005512 [#1] PREEMPT SMP
[   99.703858][ T5171] Modules linked in: bcmdhd(E) (...)
[   99.747425][ T5171] CPU: 3 PID: 5171 Comm: cat Tainted: G         C OE     5.10.189-android13-4-00003-g4a17384380d8-ab11086999 #1
[   99.748447][ T5171] Hardware name: Rockchip RK3588 CVTE V10 Board (DT)
[   99.749024][ T5171] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[   99.749616][ T5171] pc : snd_pcm_substream_proc_status_read+0x264/0x2bc
[   99.750204][ T5171] lr : snd_pcm_substream_proc_status_read+0xa4/0x2bc
[   99.750778][ T5171] sp : ffffffc0175abae0
[   99.751132][ T5171] x29: ffffffc0175abb80 x28: ffffffc009a2c498
[   99.751665][ T5171] x27: 0000000000000001 x26: ffffff810cbae6e8
[   99.752199][ T5171] x25: 0000000000400cc0 x24: ffffffc0175abc60
[   99.752729][ T5171] x23: 0000000000000000 x22: ffffff802f558400
[   99.753263][ T5171] x21: ffffff81d8d8ff00 x20: ffffff81020cdc00
[   99.753795][ T5171] x19: ffffff802d110000 x18: ffffffc014fbd058
[   99.754326][ T5171] x17: 0000000000000000 x16: 0000000000000000
[   99.754861][ T5171] x15: 000000000000c276 x14: ffffffff9a976fda
[   99.755392][ T5171] x13: 0000000065689089 x12: 000000000000d72e
[   99.755923][ T5171] x11: ffffff802d110000 x10: 00000000000000e0
[   99.756457][ T5171] x9 : 9c431600c8385d00 x8 : 0000000000000008
[   99.756990][ T5171] x7 : 0000000000000000 x6 : 000000000000003f
[   99.757522][ T5171] x5 : 0000000000000040 x4 : ffffffc0175abb70
[   99.758056][ T5171] x3 : 0000000000000001 x2 : 0000000000000001
[   99.758588][ T5171] x1 : 0000000000000000 x0 : 0000000000000000
[   99.759123][ T5171] Call trace:
[   99.759404][ T5171]  snd_pcm_substream_proc_status_read+0x264/0x2bc
[   99.759958][ T5171]  snd_info_seq_show+0x54/0xa4
[   99.760370][ T5171]  seq_read_iter+0x19c/0x7d4
[   99.760770][ T5171]  seq_read+0xf0/0x128
[   99.761117][ T5171]  proc_reg_read+0x100/0x1f8
[   99.761515][ T5171]  vfs_read+0xf4/0x354
[   99.761869][ T5171]  ksys_read+0x7c/0x148
[   99.762226][ T5171]  __arm64_sys_read+0x20/0x30
[   99.762625][ T5171]  el0_svc_common+0xd0/0x1e4
[   99.763023][ T5171]  el0_svc+0x28/0x98
[   99.763358][ T5171]  el0_sync_handler+0x8c/0xf0
[   99.763759][ T5171]  el0_sync+0x1b8/0x1c0
[   99.764118][ T5171] Code: d65f03c0 b9406102 17ffffae 94191565 (d42aa240)
[   99.764715][ T5171] ---[ end trace 1eeffa3e17c58e10 ]---
[   99.780720][ T5171] Kernel panic - not syncing: BRK handler: Fatal exception

Signed-off-by: Jason Zhang <jason.zhang@rock-chips.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231206013139.20506-1-jason.zhang@rock-chips.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/core/pcm.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/core/pcm.c
+++ b/sound/core/pcm.c
@@ -253,6 +253,7 @@ static const char * const snd_pcm_state_
 	STATE(DRAINING),
 	STATE(PAUSED),
 	STATE(SUSPENDED),
+	STATE(DISCONNECTED),
 };
 
 static const char * const snd_pcm_access_names[] = {

[PATCH 6.1 107/194] ALSA: hda/realtek: Enable headset on Lenovo M90 Gen5

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bin Li <bin.li@canonical.com>

commit 6f7e4664e597440dfbdb8b2931c561b717030d07 upstream.

Lenovo M90 Gen5 is equipped with ALC897, and it needs
ALC897_FIXUP_HEADSET_MIC_PIN quirk to make its headset mic work.

Signed-off-by: Bin Li <bin.li@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231204100450.642783-1-bin.li@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -11952,6 +11952,7 @@ static const struct snd_pci_quirk alc662
 	SND_PCI_QUIRK(0x17aa, 0x32f7, "Lenovo ThinkCentre M90", ALC897_FIXUP_HEADSET_MIC_PIN),
 	SND_PCI_QUIRK(0x17aa, 0x3321, "Lenovo ThinkCentre M70 Gen4", ALC897_FIXUP_HEADSET_MIC_PIN),
 	SND_PCI_QUIRK(0x17aa, 0x331b, "Lenovo ThinkCentre M90 Gen4", ALC897_FIXUP_HEADSET_MIC_PIN),
+	SND_PCI_QUIRK(0x17aa, 0x3364, "Lenovo ThinkCentre M90 Gen5", ALC897_FIXUP_HEADSET_MIC_PIN),
 	SND_PCI_QUIRK(0x17aa, 0x3742, "Lenovo TianYi510Pro-14IOB", ALC897_FIXUP_HEADSET_MIC_PIN2),
 	SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo Ideapad Y550P", ALC662_FIXUP_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Ideapad Y550", ALC662_FIXUP_IDEAPAD),

[PATCH 6.1 108/194] ALSA: hda/realtek: add new Framework laptop to quirks

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tim Bosse <flinn@timbos.se>

commit 33038efb64f7576bac635164021f5c984d4c755f upstream.

The Framework Laptop 13 (AMD Ryzen 7040Series) has an ALC295 with
a disconnected or faulty headset mic presence detect similar to the
previous models.  It works with the same quirk chain as
309d7363ca3d9fcdb92ff2d958be14d7e8707f68.  This model has a VID:PID
of f111:0006.

Signed-off-by: Tim Bosse <flinn@timbos.se>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231206142629.388615-1-flinn@timbos.se
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -10031,6 +10031,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x8086, 0x2081, "Intel NUC 10", ALC256_FIXUP_INTEL_NUC10),
 	SND_PCI_QUIRK(0x8086, 0x3038, "Intel NUC 13", ALC295_FIXUP_CHROME_BOOK),
 	SND_PCI_QUIRK(0xf111, 0x0001, "Framework Laptop", ALC295_FIXUP_FRAMEWORK_LAPTOP_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0xf111, 0x0006, "Framework Laptop", ALC295_FIXUP_FRAMEWORK_LAPTOP_MIC_NO_PRESENCE),
 
 #if 0
 	/* Below is a quirk table taken from the old code.

[PATCH 6.1 109/194] ALSA: hda/realtek: Add Framework laptop 16 to quirks

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mario Limonciello <mario.limonciello@amd.com>

commit 8804fa04a492f4176ea407390052292912227820 upstream.

The Framework 16" laptop has the same controller as other Framework
models.  Apply the presence detection quirk.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231206193927.2996-1-mario.limonciello@amd.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -10031,6 +10031,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x8086, 0x2081, "Intel NUC 10", ALC256_FIXUP_INTEL_NUC10),
 	SND_PCI_QUIRK(0x8086, 0x3038, "Intel NUC 13", ALC295_FIXUP_CHROME_BOOK),
 	SND_PCI_QUIRK(0xf111, 0x0001, "Framework Laptop", ALC295_FIXUP_FRAMEWORK_LAPTOP_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0xf111, 0x0005, "Framework Laptop", ALC295_FIXUP_FRAMEWORK_LAPTOP_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0xf111, 0x0006, "Framework Laptop", ALC295_FIXUP_FRAMEWORK_LAPTOP_MIC_NO_PRESENCE),
 
 #if 0

[PATCH 6.1 110/194] ring-buffer: Test last update in 32bit version of __rb_time_read()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steven Rostedt (Google) <rostedt@goodmis.org>

commit f458a1453424e03462b5bb539673c9a3cddda480 upstream.

Since 64 bit cmpxchg() is very expensive on 32bit architectures, the
timestamp used by the ring buffer does some interesting tricks to be able
to still have an atomic 64 bit number. It originally just used 60 bits and
broke it up into two 32 bit words where the extra 2 bits were used for
synchronization. But this was not enough for all use cases, and all 64
bits were required.

The 32bit version of the ring buffer timestamp was then broken up into 3
32bit words using the same counter trick. But one update was not done. The
check to see if the read operation was done without interruption only
checked the first two words and not last one (like it had before this
update). Fix it by making sure all three updates happen without
interruption by comparing the initial counter with the last updated
counter.

Link: https://lore.kernel.org/linux-trace-kernel/20231206100050.3100b7bb@gandalf.local.home

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: f03f2abce4f39 ("ring-buffer: Have 32 bit time stamps use all 64 bits")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/trace/ring_buffer.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -646,8 +646,8 @@ static inline bool __rb_time_read(rb_tim
 
 	*cnt = rb_time_cnt(top);
 
-	/* If top and bottom counts don't match, this interrupted a write */
-	if (*cnt != rb_time_cnt(bottom))
+	/* If top and msb counts don't match, this interrupted a write */
+	if (*cnt != rb_time_cnt(msb))
 		return false;
 
 	/* The shift to msb will lose its cnt bits */

[PATCH 6.1 111/194] nilfs2: fix missing error check for sb_set_blocksize call

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ryusuke Konishi <konishi.ryusuke@gmail.com>

commit d61d0ab573649789bf9eb909c89a1a193b2e3d10 upstream.

When mounting a filesystem image with a block size larger than the page
size, nilfs2 repeatedly outputs long error messages with stack traces to
the kernel log, such as the following:

 getblk(): invalid block size 8192 requested
 logical block size: 512
 ...
 Call Trace:
  dump_stack_lvl+0x92/0xd4
  dump_stack+0xd/0x10
  bdev_getblk+0x33a/0x354
  __breadahead+0x11/0x80
  nilfs_search_super_root+0xe2/0x704 [nilfs2]
  load_nilfs+0x72/0x504 [nilfs2]
  nilfs_mount+0x30f/0x518 [nilfs2]
  legacy_get_tree+0x1b/0x40
  vfs_get_tree+0x18/0xc4
  path_mount+0x786/0xa88
  __ia32_sys_mount+0x147/0x1a8
  __do_fast_syscall_32+0x56/0xc8
  do_fast_syscall_32+0x29/0x58
  do_SYSENTER_32+0x15/0x18
  entry_SYSENTER_32+0x98/0xf1
 ...

This overloads the system logger.  And to make matters worse, it sometimes
crashes the kernel with a memory access violation.

This is because the return value of the sb_set_blocksize() call, which
should be checked for errors, is not checked.

The latter issue is due to out-of-buffer memory being accessed based on a
large block size that caused sb_set_blocksize() to fail for buffers read
with the initial minimum block size that remained unupdated in the
super_block structure.

Since nilfs2 mkfs tool does not accept block sizes larger than the system
page size, this has been overlooked.  However, it is possible to create
this situation by intentionally modifying the tool or by passing a
filesystem image created on a system with a large page size to a system
with a smaller page size and mounting it.

Fix this issue by inserting the expected error handling for the call to
sb_set_blocksize().

Link: https://lkml.kernel.org/r/20231129141547.4726-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nilfs2/the_nilfs.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/fs/nilfs2/the_nilfs.c
+++ b/fs/nilfs2/the_nilfs.c
@@ -716,7 +716,11 @@ int init_nilfs(struct the_nilfs *nilfs,
 			goto failed_sbh;
 		}
 		nilfs_release_super_block(nilfs);
-		sb_set_blocksize(sb, blocksize);
+		if (!sb_set_blocksize(sb, blocksize)) {
+			nilfs_err(sb, "bad blocksize %d", blocksize);
+			err = -EINVAL;
+			goto out;
+		}
 
 		err = nilfs_load_super_block(nilfs, sb, blocksize, &sbp);
 		if (err)

[PATCH 6.1 112/194] nilfs2: prevent WARNING in nilfs_sufile_set_segment_usage()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ryusuke Konishi <konishi.ryusuke@gmail.com>

commit 675abf8df1353e0e3bde314993e0796c524cfbf0 upstream.

If nilfs2 reads a disk image with corrupted segment usage metadata, and
its segment usage information is marked as an error for the segment at the
write location, nilfs_sufile_set_segment_usage() can trigger WARN_ONs
during log writing.

Segments newly allocated for writing with nilfs_sufile_alloc() will not
have this error flag set, but this unexpected situation will occur if the
segment indexed by either nilfs->ns_segnum or nilfs->ns_nextnum (active
segment) was marked in error.

Fix this issue by inserting a sanity check to treat it as a file system
corruption.

Since error returns are not allowed during the execution phase where
nilfs_sufile_set_segment_usage() is used, this inserts the sanity check
into nilfs_sufile_mark_dirty() which pre-reads the buffer containing the
segment usage record to be updated and sets it up in a dirty state for
writing.

In addition, nilfs_sufile_set_segment_usage() is also called when
canceling log writing and undoing segment usage update, so in order to
avoid issuing the same kernel warning in that case, in case of
cancellation, avoid checking the error flag in
nilfs_sufile_set_segment_usage().

Link: https://lkml.kernel.org/r/20231205085947.4431-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+14e9f834f6ddecece094@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=14e9f834f6ddecece094
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nilfs2/sufile.c |   42 +++++++++++++++++++++++++++++++++++-------
 1 file changed, 35 insertions(+), 7 deletions(-)

--- a/fs/nilfs2/sufile.c
+++ b/fs/nilfs2/sufile.c
@@ -501,15 +501,38 @@ int nilfs_sufile_mark_dirty(struct inode
 
 	down_write(&NILFS_MDT(sufile)->mi_sem);
 	ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 0, &bh);
-	if (!ret) {
-		mark_buffer_dirty(bh);
-		nilfs_mdt_mark_dirty(sufile);
-		kaddr = kmap_atomic(bh->b_page);
-		su = nilfs_sufile_block_get_segment_usage(sufile, segnum, bh, kaddr);
+	if (ret)
+		goto out_sem;
+
+	kaddr = kmap_atomic(bh->b_page);
+	su = nilfs_sufile_block_get_segment_usage(sufile, segnum, bh, kaddr);
+	if (unlikely(nilfs_segment_usage_error(su))) {
+		struct the_nilfs *nilfs = sufile->i_sb->s_fs_info;
+
+		kunmap_atomic(kaddr);
+		brelse(bh);
+		if (nilfs_segment_is_active(nilfs, segnum)) {
+			nilfs_error(sufile->i_sb,
+				    "active segment %llu is erroneous",
+				    (unsigned long long)segnum);
+		} else {
+			/*
+			 * Segments marked erroneous are never allocated by
+			 * nilfs_sufile_alloc(); only active segments, ie,
+			 * the segments indexed by ns_segnum or ns_nextnum,
+			 * can be erroneous here.
+			 */
+			WARN_ON_ONCE(1);
+		}
+		ret = -EIO;
+	} else {
 		nilfs_segment_usage_set_dirty(su);
 		kunmap_atomic(kaddr);
+		mark_buffer_dirty(bh);
+		nilfs_mdt_mark_dirty(sufile);
 		brelse(bh);
 	}
+out_sem:
 	up_write(&NILFS_MDT(sufile)->mi_sem);
 	return ret;
 }
@@ -536,9 +559,14 @@ int nilfs_sufile_set_segment_usage(struc
 
 	kaddr = kmap_atomic(bh->b_page);
 	su = nilfs_sufile_block_get_segment_usage(sufile, segnum, bh, kaddr);
-	WARN_ON(nilfs_segment_usage_error(su));
-	if (modtime)
+	if (modtime) {
+		/*
+		 * Check segusage error and set su_lastmod only when updating
+		 * this entry with a valid timestamp, not for cancellation.
+		 */
+		WARN_ON_ONCE(nilfs_segment_usage_error(su));
 		su->su_lastmod = cpu_to_le64(modtime);
+	}
 	su->su_nblocks = cpu_to_le32(nblocks);
 	kunmap_atomic(kaddr);
 

[PATCH 6.1 113/194] cgroup_freezer: cgroup_freezing: Check if not frozen

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tim Van Patten <timvp@google.com>

commit cff5f49d433fcd0063c8be7dd08fa5bf190c6c37 upstream.

__thaw_task() was recently updated to warn if the task being thawed was
part of a freezer cgroup that is still currently freezing:

	void __thaw_task(struct task_struct *p)
	{
	...
		if (WARN_ON_ONCE(freezing(p)))
			goto unlock;

This has exposed a bug in cgroup1 freezing where when CGROUP_FROZEN is
asserted, the CGROUP_FREEZING bits are not also cleared at the same
time. Meaning, when a cgroup is marked FROZEN it continues to be marked
FREEZING as well. This causes the WARNING to trigger, because
cgroup_freezing() thinks the cgroup is still freezing.

There are two ways to fix this:

1. Whenever FROZEN is set, clear FREEZING for the cgroup and all
children cgroups.
2. Update cgroup_freezing() to also verify that FROZEN is not set.

This patch implements option (2), since it's smaller and more
straightforward.

Signed-off-by: Tim Van Patten <timvp@google.com>
Tested-by: Mark Hasemeyer <markhas@chromium.org>
Fixes: f5d39b020809 ("freezer,sched: Rewrite core freezer logic")
Cc: stable@vger.kernel.org # v6.1+
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/cgroup/legacy_freezer.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/kernel/cgroup/legacy_freezer.c b/kernel/cgroup/legacy_freezer.c
index 122dacb3a443..66d1708042a7 100644
--- a/kernel/cgroup/legacy_freezer.c
+++ b/kernel/cgroup/legacy_freezer.c
@@ -66,9 +66,15 @@ static struct freezer *parent_freezer(struct freezer *freezer)
 bool cgroup_freezing(struct task_struct *task)
 {
 	bool ret;
+	unsigned int state;
 
 	rcu_read_lock();
-	ret = task_freezer(task)->state & CGROUP_FREEZING;
+	/* Check if the cgroup is still FREEZING, but not FROZEN. The extra
+	 * !FROZEN check is required, because the FREEZING bit is not cleared
+	 * when the state FROZEN is reached.
+	 */
+	state = task_freezer(task)->state;
+	ret = (state & CGROUP_FREEZING) && !(state & CGROUP_FROZEN);
 	rcu_read_unlock();
 
 	return ret;
-- 
2.43.0

[PATCH 6.1 114/194] checkstack: fix printed address

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Heiko Carstens <hca@linux.ibm.com>

commit ee34db3f271cea4d4252048617919c2caafe698b upstream.

All addresses printed by checkstack have an extra incorrect 0 appended at
the end.

This was introduced with commit 677f1410e058 ("scripts/checkstack.pl: don't
display $dre as different entity"): since then the address is taken from
the line which contains the function name, instead of the line which
contains stack consumption. E.g. on s390:

0000000000100a30 <do_one_initcall>:
...
  100a44:       e3 f0 ff 70 ff 71       lay     %r15,-144(%r15)

So the used regex which matches spaces and hexadecimal numbers to extract
an address now matches a different substring. Subsequently replacing spaces
with 0 appends a zero at the and, instead of replacing leading spaces.

Fix this by using the proper regex, and simplify the code a bit.

Link: https://lkml.kernel.org/r/20231120183719.2188479-2-hca@linux.ibm.com
Fixes: 677f1410e058 ("scripts/checkstack.pl: don't display $dre as different entity")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Maninder Singh <maninder1.s@samsung.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Vaneet Narang <v.narang@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 scripts/checkstack.pl |    8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

--- a/scripts/checkstack.pl
+++ b/scripts/checkstack.pl
@@ -146,15 +146,11 @@ $total_size = 0;
 while (my $line = <STDIN>) {
 	if ($line =~ m/$funcre/) {
 		$func = $1;
-		next if $line !~ m/^($xs*)/;
+		next if $line !~ m/^($x*)/;
 		if ($total_size > $min_stack) {
 			push @stack, "$intro$total_size\n";
 		}
-
-		$addr = $1;
-		$addr =~ s/ /0/g;
-		$addr = "0x$addr";
-
+		$addr = "0x$1";
 		$intro = "$addr $func [$file]:";
 		my $padlen = 56 - length($intro);
 		while ($padlen > 0) {

[PATCH 6.1 115/194] tracing: Always update snapshot buffer size

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steven Rostedt (Google) <rostedt@goodmis.org>

commit 7be76461f302ec05cbd62b90b2a05c64299ca01f upstream.

It use to be that only the top level instance had a snapshot buffer (for
latency tracers like wakeup and irqsoff). The update of the ring buffer
size would check if the instance was the top level and if so, it would
also update the snapshot buffer as it needs to be the same as the main
buffer.

Now that lower level instances also has a snapshot buffer, they too need
to update their snapshot buffer sizes when the main buffer is changed,
otherwise the following can be triggered:

 # cd /sys/kernel/tracing
 # echo 1500 > buffer_size_kb
 # mkdir instances/foo
 # echo irqsoff > instances/foo/current_tracer
 # echo 1000 > instances/foo/buffer_size_kb

Produces:

 WARNING: CPU: 2 PID: 856 at kernel/trace/trace.c:1938 update_max_tr_single.part.0+0x27d/0x320

Which is:

	ret = ring_buffer_swap_cpu(tr->max_buffer.buffer, tr->array_buffer.buffer, cpu);

	if (ret == -EBUSY) {
		[..]
	}

	WARN_ON_ONCE(ret && ret != -EAGAIN && ret != -EBUSY);  <== here

That's because ring_buffer_swap_cpu() has:

	int ret = -EINVAL;

	[..]

	/* At least make sure the two buffers are somewhat the same */
	if (cpu_buffer_a->nr_pages != cpu_buffer_b->nr_pages)
		goto out;

	[..]
 out:
	return ret;
 }

Instead, update all instances' snapshot buffer sizes when their main
buffer size is updated.

Link: https://lkml.kernel.org/r/20231205220010.454662151@goodmis.org

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 6d9b3fa5e7f6 ("tracing: Move tracing_max_latency into trace_array")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/trace/trace.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -6306,8 +6306,7 @@ static int __tracing_resize_ring_buffer(
 		return ret;
 
 #ifdef CONFIG_TRACER_MAX_TRACE
-	if (!(tr->flags & TRACE_ARRAY_FL_GLOBAL) ||
-	    !tr->current_trace->use_max_tr)
+	if (!tr->current_trace->use_max_tr)
 		goto out;
 
 	ret = ring_buffer_resize(tr->max_buffer.buffer, size, cpu);

[PATCH 6.1 116/194] tracing: Disable snapshot buffer when stopping instance tracers

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steven Rostedt (Google) <rostedt@goodmis.org>

commit b538bf7d0ec11ca49f536dfda742a5f6db90a798 upstream.

It use to be that only the top level instance had a snapshot buffer (for
latency tracers like wakeup and irqsoff). When stopping a tracer in an
instance would not disable the snapshot buffer. This could have some
unintended consequences if the irqsoff tracer is enabled.

Consolidate the tracing_start/stop() with tracing_start/stop_tr() so that
all instances behave the same. The tracing_start/stop() functions will
just call their respective tracing_start/stop_tr() with the global_array
passed in.

Link: https://lkml.kernel.org/r/20231205220011.041220035@goodmis.org

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 6d9b3fa5e7f6 ("tracing: Move tracing_max_latency into trace_array")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/trace/trace.c |  110 +++++++++++++++------------------------------------
 1 file changed, 34 insertions(+), 76 deletions(-)

--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -2297,13 +2297,7 @@ int is_tracing_stopped(void)
 	return global_trace.stop_count;
 }
 
-/**
- * tracing_start - quick start of the tracer
- *
- * If tracing is enabled but was stopped by tracing_stop,
- * this will start the tracer back up.
- */
-void tracing_start(void)
+static void tracing_start_tr(struct trace_array *tr)
 {
 	struct trace_buffer *buffer;
 	unsigned long flags;
@@ -2311,119 +2305,83 @@ void tracing_start(void)
 	if (tracing_disabled)
 		return;
 
-	raw_spin_lock_irqsave(&global_trace.start_lock, flags);
-	if (--global_trace.stop_count) {
-		if (global_trace.stop_count < 0) {
+	raw_spin_lock_irqsave(&tr->start_lock, flags);
+	if (--tr->stop_count) {
+		if (WARN_ON_ONCE(tr->stop_count < 0)) {
 			/* Someone screwed up their debugging */
-			WARN_ON_ONCE(1);
-			global_trace.stop_count = 0;
+			tr->stop_count = 0;
 		}
 		goto out;
 	}
 
 	/* Prevent the buffers from switching */
-	arch_spin_lock(&global_trace.max_lock);
+	arch_spin_lock(&tr->max_lock);
 
-	buffer = global_trace.array_buffer.buffer;
+	buffer = tr->array_buffer.buffer;
 	if (buffer)
 		ring_buffer_record_enable(buffer);
 
 #ifdef CONFIG_TRACER_MAX_TRACE
-	buffer = global_trace.max_buffer.buffer;
+	buffer = tr->max_buffer.buffer;
 	if (buffer)
 		ring_buffer_record_enable(buffer);
 #endif
 
-	arch_spin_unlock(&global_trace.max_lock);
-
- out:
-	raw_spin_unlock_irqrestore(&global_trace.start_lock, flags);
-}
-
-static void tracing_start_tr(struct trace_array *tr)
-{
-	struct trace_buffer *buffer;
-	unsigned long flags;
-
-	if (tracing_disabled)
-		return;
-
-	/* If global, we need to also start the max tracer */
-	if (tr->flags & TRACE_ARRAY_FL_GLOBAL)
-		return tracing_start();
-
-	raw_spin_lock_irqsave(&tr->start_lock, flags);
-
-	if (--tr->stop_count) {
-		if (tr->stop_count < 0) {
-			/* Someone screwed up their debugging */
-			WARN_ON_ONCE(1);
-			tr->stop_count = 0;
-		}
-		goto out;
-	}
-
-	buffer = tr->array_buffer.buffer;
-	if (buffer)
-		ring_buffer_record_enable(buffer);
+	arch_spin_unlock(&tr->max_lock);
 
  out:
 	raw_spin_unlock_irqrestore(&tr->start_lock, flags);
 }
 
 /**
- * tracing_stop - quick stop of the tracer
+ * tracing_start - quick start of the tracer
  *
- * Light weight way to stop tracing. Use in conjunction with
- * tracing_start.
+ * If tracing is enabled but was stopped by tracing_stop,
+ * this will start the tracer back up.
  */
-void tracing_stop(void)
+void tracing_start(void)
+
+{
+	return tracing_start_tr(&global_trace);
+}
+
+static void tracing_stop_tr(struct trace_array *tr)
 {
 	struct trace_buffer *buffer;
 	unsigned long flags;
 
-	raw_spin_lock_irqsave(&global_trace.start_lock, flags);
-	if (global_trace.stop_count++)
+	raw_spin_lock_irqsave(&tr->start_lock, flags);
+	if (tr->stop_count++)
 		goto out;
 
 	/* Prevent the buffers from switching */
-	arch_spin_lock(&global_trace.max_lock);
+	arch_spin_lock(&tr->max_lock);
 
-	buffer = global_trace.array_buffer.buffer;
+	buffer = tr->array_buffer.buffer;
 	if (buffer)
 		ring_buffer_record_disable(buffer);
 
 #ifdef CONFIG_TRACER_MAX_TRACE
-	buffer = global_trace.max_buffer.buffer;
+	buffer = tr->max_buffer.buffer;
 	if (buffer)
 		ring_buffer_record_disable(buffer);
 #endif
 
-	arch_spin_unlock(&global_trace.max_lock);
+	arch_spin_unlock(&tr->max_lock);
 
  out:
-	raw_spin_unlock_irqrestore(&global_trace.start_lock, flags);
+	raw_spin_unlock_irqrestore(&tr->start_lock, flags);
 }
 
-static void tracing_stop_tr(struct trace_array *tr)
+/**
+ * tracing_stop - quick stop of the tracer
+ *
+ * Light weight way to stop tracing. Use in conjunction with
+ * tracing_start.
+ */
+void tracing_stop(void)
 {
-	struct trace_buffer *buffer;
-	unsigned long flags;
-
-	/* If global, we need to also stop the max tracer */
-	if (tr->flags & TRACE_ARRAY_FL_GLOBAL)
-		return tracing_stop();
-
-	raw_spin_lock_irqsave(&tr->start_lock, flags);
-	if (tr->stop_count++)
-		goto out;
-
-	buffer = tr->array_buffer.buffer;
-	if (buffer)
-		ring_buffer_record_disable(buffer);
-
- out:
-	raw_spin_unlock_irqrestore(&tr->start_lock, flags);
+	return tracing_stop_tr(&global_trace);
 }
 
 static int trace_save_cmdline(struct task_struct *tsk)

[PATCH 6.1 117/194] tracing: Fix incomplete locking when disabling buffered events

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Petr Pavlu <petr.pavlu@suse.com>

commit 7fed14f7ac9cf5e38c693836fe4a874720141845 upstream.

The following warning appears when using buffered events:

[  203.556451] WARNING: CPU: 53 PID: 10220 at kernel/trace/ring_buffer.c:3912 ring_buffer_discard_commit+0x2eb/0x420
[...]
[  203.670690] CPU: 53 PID: 10220 Comm: stress-ng-sysin Tainted: G            E      6.7.0-rc2-default #4 56e6d0fcf5581e6e51eaaecbdaec2a2338c80f3a
[  203.670704] Hardware name: Intel Corp. GROVEPORT/GROVEPORT, BIOS GVPRCRB1.86B.0016.D04.1705030402 05/03/2017
[  203.670709] RIP: 0010:ring_buffer_discard_commit+0x2eb/0x420
[  203.735721] Code: 4c 8b 4a 50 48 8b 42 48 49 39 c1 0f 84 b3 00 00 00 49 83 e8 01 75 b1 48 8b 42 10 f0 ff 40 08 0f 0b e9 fc fe ff ff f0 ff 47 08 <0f> 0b e9 77 fd ff ff 48 8b 42 10 f0 ff 40 08 0f 0b e9 f5 fe ff ff
[  203.735734] RSP: 0018:ffffb4ae4f7b7d80 EFLAGS: 00010202
[  203.735745] RAX: 0000000000000000 RBX: ffffb4ae4f7b7de0 RCX: ffff8ac10662c000
[  203.735754] RDX: ffff8ac0c750be00 RSI: ffff8ac10662c000 RDI: ffff8ac0c004d400
[  203.781832] RBP: ffff8ac0c039cea0 R08: 0000000000000000 R09: 0000000000000000
[  203.781839] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[  203.781842] R13: ffff8ac10662c000 R14: ffff8ac0c004d400 R15: ffff8ac10662c008
[  203.781846] FS:  00007f4cd8a67740(0000) GS:ffff8ad798880000(0000) knlGS:0000000000000000
[  203.781851] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  203.781855] CR2: 0000559766a74028 CR3: 00000001804c4000 CR4: 00000000001506f0
[  203.781862] Call Trace:
[  203.781870]  <TASK>
[  203.851949]  trace_event_buffer_commit+0x1ea/0x250
[  203.851967]  trace_event_raw_event_sys_enter+0x83/0xe0
[  203.851983]  syscall_trace_enter.isra.0+0x182/0x1a0
[  203.851990]  do_syscall_64+0x3a/0xe0
[  203.852075]  entry_SYSCALL_64_after_hwframe+0x6e/0x76
[  203.852090] RIP: 0033:0x7f4cd870fa77
[  203.982920] Code: 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 90 b8 89 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e9 43 0e 00 f7 d8 64 89 01 48
[  203.982932] RSP: 002b:00007fff99717dd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000089
[  203.982942] RAX: ffffffffffffffda RBX: 0000558ea1d7b6f0 RCX: 00007f4cd870fa77
[  203.982948] RDX: 0000000000000000 RSI: 00007fff99717de0 RDI: 0000558ea1d7b6f0
[  203.982957] RBP: 00007fff99717de0 R08: 00007fff997180e0 R09: 00007fff997180e0
[  203.982962] R10: 00007fff997180e0 R11: 0000000000000246 R12: 00007fff99717f40
[  204.049239] R13: 00007fff99718590 R14: 0000558e9f2127a8 R15: 00007fff997180b0
[  204.049256]  </TASK>

For instance, it can be triggered by running these two commands in
parallel:

 $ while true; do
    echo hist:key=id.syscall:val=hitcount > \
      /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger;
  done
 $ stress-ng --sysinfo $(nproc)

The warning indicates that the current ring_buffer_per_cpu is not in the
committing state. It happens because the active ring_buffer_event
doesn't actually come from the ring_buffer_per_cpu but is allocated from
trace_buffered_event.

The bug is in function trace_buffered_event_disable() where the
following normally happens:

* The code invokes disable_trace_buffered_event() via
  smp_call_function_many() and follows it by synchronize_rcu(). This
  increments the per-CPU variable trace_buffered_event_cnt on each
  target CPU and grants trace_buffered_event_disable() the exclusive
  access to the per-CPU variable trace_buffered_event.

* Maintenance is performed on trace_buffered_event, all per-CPU event
  buffers get freed.

* The code invokes enable_trace_buffered_event() via
  smp_call_function_many(). This decrements trace_buffered_event_cnt and
  releases the access to trace_buffered_event.

A problem is that smp_call_function_many() runs a given function on all
target CPUs except on the current one. The following can then occur:

* Task X executing trace_buffered_event_disable() runs on CPU 0.

* The control reaches synchronize_rcu() and the task gets rescheduled on
  another CPU 1.

* The RCU synchronization finishes. At this point,
  trace_buffered_event_disable() has the exclusive access to all
  trace_buffered_event variables except trace_buffered_event[CPU0]
  because trace_buffered_event_cnt[CPU0] is never incremented and if the
  buffer is currently unused, remains set to 0.

* A different task Y is scheduled on CPU 0 and hits a trace event. The
  code in trace_event_buffer_lock_reserve() sees that
  trace_buffered_event_cnt[CPU0] is set to 0 and decides the use the
  buffer provided by trace_buffered_event[CPU0].

* Task X continues its execution in trace_buffered_event_disable(). The
  code incorrectly frees the event buffer pointed by
  trace_buffered_event[CPU0] and resets the variable to NULL.

* Task Y writes event data to the now freed buffer and later detects the
  created inconsistency.

The issue is observable since commit dea499781a11 ("tracing: Fix warning
in trace_buffered_event_disable()") which moved the call of
trace_buffered_event_disable() in __ftrace_event_enable_disable()
earlier, prior to invoking call->class->reg(.. TRACE_REG_UNREGISTER ..).
The underlying problem in trace_buffered_event_disable() is however
present since the original implementation in commit 0fc1b09ff1ff
("tracing: Use temp buffer when filtering events").

Fix the problem by replacing the two smp_call_function_many() calls with
on_each_cpu_mask() which invokes a given callback on all CPUs.

Link: https://lore.kernel.org/all/20231127151248.7232-2-petr.pavlu@suse.com/
Link: https://lkml.kernel.org/r/20231205161736.19663-2-petr.pavlu@suse.com

Cc: stable@vger.kernel.org
Fixes: 0fc1b09ff1ff ("tracing: Use temp buffer when filtering events")
Fixes: dea499781a11 ("tracing: Fix warning in trace_buffered_event_disable()")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/trace/trace.c |   12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -2717,11 +2717,9 @@ void trace_buffered_event_disable(void)
 	if (--trace_buffered_event_ref)
 		return;
 
-	preempt_disable();
 	/* For each CPU, set the buffer as used. */
-	smp_call_function_many(tracing_buffer_mask,
-			       disable_trace_buffered_event, NULL, 1);
-	preempt_enable();
+	on_each_cpu_mask(tracing_buffer_mask, disable_trace_buffered_event,
+			 NULL, true);
 
 	/* Wait for all current users to finish */
 	synchronize_rcu();
@@ -2736,11 +2734,9 @@ void trace_buffered_event_disable(void)
 	 */
 	smp_wmb();
 
-	preempt_disable();
 	/* Do the work on each cpu */
-	smp_call_function_many(tracing_buffer_mask,
-			       enable_trace_buffered_event, NULL, 1);
-	preempt_enable();
+	on_each_cpu_mask(tracing_buffer_mask, enable_trace_buffered_event, NULL,
+			 true);
 }
 
 static struct trace_buffer *temp_buffer;

[PATCH 6.1 118/194] tracing: Fix a possible race when disabling buffered events

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Petr Pavlu <petr.pavlu@suse.com>

commit c0591b1cccf708a47bc465c62436d669a4213323 upstream.

Function trace_buffered_event_disable() is responsible for freeing pages
backing buffered events and this process can run concurrently with
trace_event_buffer_lock_reserve().

The following race is currently possible:

* Function trace_buffered_event_disable() is called on CPU 0. It
  increments trace_buffered_event_cnt on each CPU and waits via
  synchronize_rcu() for each user of trace_buffered_event to complete.

* After synchronize_rcu() is finished, function
  trace_buffered_event_disable() has the exclusive access to
  trace_buffered_event. All counters trace_buffered_event_cnt are at 1
  and all pointers trace_buffered_event are still valid.

* At this point, on a different CPU 1, the execution reaches
  trace_event_buffer_lock_reserve(). The function calls
  preempt_disable_notrace() and only now enters an RCU read-side
  critical section. The function proceeds and reads a still valid
  pointer from trace_buffered_event[CPU1] into the local variable
  "entry". However, it doesn't yet read trace_buffered_event_cnt[CPU1]
  which happens later.

* Function trace_buffered_event_disable() continues. It frees
  trace_buffered_event[CPU1] and decrements
  trace_buffered_event_cnt[CPU1] back to 0.

* Function trace_event_buffer_lock_reserve() continues. It reads and
  increments trace_buffered_event_cnt[CPU1] from 0 to 1. This makes it
  believe that it can use the "entry" that it already obtained but the
  pointer is now invalid and any access results in a use-after-free.

Fix the problem by making a second synchronize_rcu() call after all
trace_buffered_event values are set to NULL. This waits on all potential
users in trace_event_buffer_lock_reserve() that still read a previous
pointer from trace_buffered_event.

Link: https://lore.kernel.org/all/20231127151248.7232-2-petr.pavlu@suse.com/
Link: https://lkml.kernel.org/r/20231205161736.19663-4-petr.pavlu@suse.com

Cc: stable@vger.kernel.org
Fixes: 0fc1b09ff1ff ("tracing: Use temp buffer when filtering events")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/trace/trace.c |   12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -2728,13 +2728,17 @@ void trace_buffered_event_disable(void)
 		free_page((unsigned long)per_cpu(trace_buffered_event, cpu));
 		per_cpu(trace_buffered_event, cpu) = NULL;
 	}
+
 	/*
-	 * Make sure trace_buffered_event is NULL before clearing
-	 * trace_buffered_event_cnt.
+	 * Wait for all CPUs that potentially started checking if they can use
+	 * their event buffer only after the previous synchronize_rcu() call and
+	 * they still read a valid pointer from trace_buffered_event. It must be
+	 * ensured they don't see cleared trace_buffered_event_cnt else they
+	 * could wrongly decide to use the pointed-to buffer which is now freed.
 	 */
-	smp_wmb();
+	synchronize_rcu();
 
-	/* Do the work on each cpu */
+	/* For each CPU, relinquish the buffer */
 	on_each_cpu_mask(tracing_buffer_mask, enable_trace_buffered_event, NULL,
 			 true);
 }

[PATCH 6.1 119/194] packet: Move reference count in packet_sock to atomic_long_t

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Borkmann <daniel@iogearbox.net>

commit db3fadacaf0c817b222090290d06ca2a338422d0 upstream.

In some potential instances the reference count on struct packet_sock
could be saturated and cause overflows which gets the kernel a bit
confused. To prevent this, move to a 64-bit atomic reference count on
64-bit architectures to prevent the possibility of this type to overflow.

Because we can not handle saturation, using refcount_t is not possible
in this place. Maybe someday in the future if it changes it could be
used. Also, instead of using plain atomic64_t, use atomic_long_t instead.
32-bit machines tend to be memory-limited (i.e. anything that increases
a reference uses so much memory that you can't actually get to 2**32
references). 32-bit architectures also tend to have serious problems
with 64-bit atomics. Hence, atomic_long_t is the more natural solution.

Reported-by: "The UK's National Cyber Security Centre (NCSC)" <security@ncsc.gov.uk>
Co-developed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231201131021.19999-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/packet/af_packet.c |   16 ++++++++--------
 net/packet/internal.h  |    2 +-
 2 files changed, 9 insertions(+), 9 deletions(-)

--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -4275,7 +4275,7 @@ static void packet_mm_open(struct vm_are
 	struct sock *sk = sock->sk;
 
 	if (sk)
-		atomic_inc(&pkt_sk(sk)->mapped);
+		atomic_long_inc(&pkt_sk(sk)->mapped);
 }
 
 static void packet_mm_close(struct vm_area_struct *vma)
@@ -4285,7 +4285,7 @@ static void packet_mm_close(struct vm_ar
 	struct sock *sk = sock->sk;
 
 	if (sk)
-		atomic_dec(&pkt_sk(sk)->mapped);
+		atomic_long_dec(&pkt_sk(sk)->mapped);
 }
 
 static const struct vm_operations_struct packet_mmap_ops = {
@@ -4380,7 +4380,7 @@ static int packet_set_ring(struct sock *
 
 	err = -EBUSY;
 	if (!closing) {
-		if (atomic_read(&po->mapped))
+		if (atomic_long_read(&po->mapped))
 			goto out;
 		if (packet_read_pending(rb))
 			goto out;
@@ -4483,7 +4483,7 @@ static int packet_set_ring(struct sock *
 
 	err = -EBUSY;
 	mutex_lock(&po->pg_vec_lock);
-	if (closing || atomic_read(&po->mapped) == 0) {
+	if (closing || atomic_long_read(&po->mapped) == 0) {
 		err = 0;
 		spin_lock_bh(&rb_queue->lock);
 		swap(rb->pg_vec, pg_vec);
@@ -4501,9 +4501,9 @@ static int packet_set_ring(struct sock *
 		po->prot_hook.func = (po->rx_ring.pg_vec) ?
 						tpacket_rcv : packet_rcv;
 		skb_queue_purge(rb_queue);
-		if (atomic_read(&po->mapped))
-			pr_err("packet_mmap: vma is busy: %d\n",
-			       atomic_read(&po->mapped));
+		if (atomic_long_read(&po->mapped))
+			pr_err("packet_mmap: vma is busy: %ld\n",
+			       atomic_long_read(&po->mapped));
 	}
 	mutex_unlock(&po->pg_vec_lock);
 
@@ -4581,7 +4581,7 @@ static int packet_mmap(struct file *file
 		}
 	}
 
-	atomic_inc(&po->mapped);
+	atomic_long_inc(&po->mapped);
 	vma->vm_ops = &packet_mmap_ops;
 	err = 0;
 
--- a/net/packet/internal.h
+++ b/net/packet/internal.h
@@ -126,7 +126,7 @@ struct packet_sock {
 	__be16			num;
 	struct packet_rollover	*rollover;
 	struct packet_mclist	*mclist;
-	atomic_t		mapped;
+	atomic_long_t		mapped;
 	enum tpacket_versions	tp_version;
 	unsigned int		tp_hdrlen;
 	unsigned int		tp_reserve;

[PATCH 6.1 120/194] r8169: fix rtl8125b PAUSE frames blasting when suspended

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: ChunHao Lin <hau@realtek.com>

commit 4b0768b6556af56ee9b7cf4e68452a2b6289ae45 upstream.

When FIFO reaches near full state, device will issue pause frame.
If pause slot is enabled(set to 1), in this time, device will issue
pause frame only once. But if pause slot is disabled(set to 0), device
will keep sending pause frames until FIFO reaches near empty state.

When pause slot is disabled, if there is no one to handle receive
packets, device FIFO will reach near full state and keep sending
pause frames. That will impact entire local area network.

This issue can be reproduced in Chromebox (not Chromebook) in
developer mode running a test image (and v5.10 kernel):
1) ping -f $CHROMEBOX (from workstation on same local network)
2) run "powerd_dbus_suspend" from command line on the $CHROMEBOX
3) ping $ROUTER (wait until ping fails from workstation)

Takes about ~20-30 seconds after step 2 for the local network to
stop working.

Fix this issue by enabling pause slot to only send pause frame once
when FIFO reaches near full state.

Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125")
Reported-by: Grant Grundler <grundler@chromium.org>
Tested-by: Grant Grundler <grundler@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20231129155350.5843-1-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/realtek/r8169_main.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -193,6 +193,7 @@ enum rtl_registers {
 					/* No threshold before first PCI xfer */
 #define	RX_FIFO_THRESH			(7 << RXCFG_FIFO_SHIFT)
 #define	RX_EARLY_OFF			(1 << 11)
+#define	RX_PAUSE_SLOT_ON		(1 << 11)	/* 8125b and later */
 #define	RXCFG_DMA_SHIFT			8
 					/* Unlimited maximum PCI burst. */
 #define	RX_DMA_BURST			(7 << RXCFG_DMA_SHIFT)
@@ -2237,9 +2238,13 @@ static void rtl_init_rxcfg(struct rtl816
 	case RTL_GIGA_MAC_VER_40 ... RTL_GIGA_MAC_VER_53:
 		RTL_W32(tp, RxConfig, RX128_INT_EN | RX_MULTI_EN | RX_DMA_BURST | RX_EARLY_OFF);
 		break;
-	case RTL_GIGA_MAC_VER_61 ... RTL_GIGA_MAC_VER_63:
+	case RTL_GIGA_MAC_VER_61:
 		RTL_W32(tp, RxConfig, RX_FETCH_DFLT_8125 | RX_DMA_BURST);
 		break;
+	case RTL_GIGA_MAC_VER_63:
+		RTL_W32(tp, RxConfig, RX_FETCH_DFLT_8125 | RX_DMA_BURST |
+			RX_PAUSE_SLOT_ON);
+		break;
 	default:
 		RTL_W32(tp, RxConfig, RX128_INT_EN | RX_DMA_BURST);
 		break;

[PATCH 6.1 121/194] regmap: fix bogus error on regcache_sync success

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthias Reichl <hias@horus.com>

commit fea88064445a59584460f7f67d102b6e5fc1ca1d upstream.

Since commit 0ec7731655de ("regmap: Ensure range selector registers
are updated after cache sync") opening pcm512x based soundcards fail
with EINVAL and dmesg shows sync cache and pm_runtime_get errors:

[  228.794676] pcm512x 1-004c: Failed to sync cache: -22
[  228.794740] pcm512x 1-004c: ASoC: error at snd_soc_pcm_component_pm_runtime_get on pcm512x.1-004c: -22

This is caused by the cache check result leaking out into the
regcache_sync return value.

Fix this by making the check local-only, as the comment above the
regcache_read call states a non-zero return value means there's
nothing to do so the return value should not be altered.

Fixes: 0ec7731655de ("regmap: Ensure range selector registers are updated after cache sync")
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Reichl <hias@horus.com>
Link: https://lore.kernel.org/r/20231203222216.96547-1-hias@horus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/base/regmap/regcache.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/base/regmap/regcache.c
+++ b/drivers/base/regmap/regcache.c
@@ -410,8 +410,7 @@ out:
 			rb_entry(node, struct regmap_range_node, node);
 
 		/* If there's nothing in the cache there's nothing to sync */
-		ret = regcache_read(map, this->selector_reg, &i);
-		if (ret != 0)
+		if (regcache_read(map, this->selector_reg, &i) != 0)
 			continue;
 
 		ret = _regmap_write(map, this->selector_reg, i);

[PATCH 6.1 122/194] platform/surface: aggregator: fix recv_buf() return value

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Francesco Dolcini <francesco.dolcini@toradex.com>

commit c8820c92caf0770bec976b01fa9e82bb993c5865 upstream.

Serdev recv_buf() callback is supposed to return the amount of bytes
consumed, therefore an int in between 0 and count.

Do not return negative number in case of issue, when
ssam_controller_receive_buf() returns ESHUTDOWN just returns 0, e.g. no
bytes consumed, this keep the exact same behavior as it was before.

This fixes a potential WARN in serdev-ttyport.c:ttyport_receive_buf().

Fixes: c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem")
Cc: stable@vger.kernel.org
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20231128194935.11350-1-francesco@dolcini.it
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/platform/surface/aggregator/core.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/platform/surface/aggregator/core.c
+++ b/drivers/platform/surface/aggregator/core.c
@@ -231,9 +231,12 @@ static int ssam_receive_buf(struct serde
 			    size_t n)
 {
 	struct ssam_controller *ctrl;
+	int ret;
 
 	ctrl = serdev_device_get_drvdata(dev);
-	return ssam_controller_receive_buf(ctrl, buf, n);
+	ret = ssam_controller_receive_buf(ctrl, buf, n);
+
+	return ret < 0 ? 0 : ret;
 }
 
 static void ssam_write_wakeup(struct serdev_device *dev)

[PATCH 6.1 123/194] hugetlb: fix null-ptr-deref in hugetlb_vma_lock_write

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mike Kravetz <mike.kravetz@oracle.com>

commit 187da0f8250aa94bd96266096aef6f694e0b4cd2 upstream.

The routine __vma_private_lock tests for the existence of a reserve map
associated with a private hugetlb mapping.  A pointer to the reserve map
is in vma->vm_private_data.  __vma_private_lock was checking the pointer
for NULL.  However, it is possible that the low bits of the pointer could
be used as flags.  In such instances, vm_private_data is not NULL and not
a valid pointer.  This results in the null-ptr-deref reported by syzbot:

general protection fault, probably for non-canonical address 0xdffffc000000001d:
 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef]
CPU: 0 PID: 5048 Comm: syz-executor139 Not tainted 6.6.0-rc7-syzkaller-00142-g88
8cf78c29e2 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 1
0/09/2023
RIP: 0010:__lock_acquire+0x109/0x5de0 kernel/locking/lockdep.c:5004
...
Call Trace:
 <TASK>
 lock_acquire kernel/locking/lockdep.c:5753 [inline]
 lock_acquire+0x1ae/0x510 kernel/locking/lockdep.c:5718
 down_write+0x93/0x200 kernel/locking/rwsem.c:1573
 hugetlb_vma_lock_write mm/hugetlb.c:300 [inline]
 hugetlb_vma_lock_write+0xae/0x100 mm/hugetlb.c:291
 __hugetlb_zap_begin+0x1e9/0x2b0 mm/hugetlb.c:5447
 hugetlb_zap_begin include/linux/hugetlb.h:258 [inline]
 unmap_vmas+0x2f4/0x470 mm/memory.c:1733
 exit_mmap+0x1ad/0xa60 mm/mmap.c:3230
 __mmput+0x12a/0x4d0 kernel/fork.c:1349
 mmput+0x62/0x70 kernel/fork.c:1371
 exit_mm kernel/exit.c:567 [inline]
 do_exit+0x9ad/0x2a20 kernel/exit.c:861
 __do_sys_exit kernel/exit.c:991 [inline]
 __se_sys_exit kernel/exit.c:989 [inline]
 __x64_sys_exit+0x42/0x50 kernel/exit.c:989
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Mask off low bit flags before checking for NULL pointer.  In addition, the
reserve map only 'belongs' to the OWNER (parent in parent/child
relationships) so also check for the OWNER flag.

Link: https://lkml.kernel.org/r/20231114012033.259600-1-mike.kravetz@oracle.com
Reported-by: syzbot+6ada951e7c0f7bc8a71e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-mm/00000000000078d1e00608d7878b@google.com/
Fixes: bf4916922c60 ("hugetlbfs: extend hugetlb_vma_lock to private VMAs")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Rik van Riel <riel@surriel.com>
Cc: Edward Adam Davis <eadavis@qq.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/hugetlb.h |    5 +----
 mm/hugetlb.c            |    7 +++++++
 2 files changed, 8 insertions(+), 4 deletions(-)

--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -880,10 +880,7 @@ static inline bool hugepage_migration_su
 	return arch_hugetlb_migration_supported(h);
 }
 
-static inline bool __vma_private_lock(struct vm_area_struct *vma)
-{
-	return (!(vma->vm_flags & VM_MAYSHARE)) && vma->vm_private_data;
-}
+bool __vma_private_lock(struct vm_area_struct *vma);
 
 /*
  * Movability check is different as compared to migration check.
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1189,6 +1189,13 @@ static int is_vma_resv_set(struct vm_are
 	return (get_vma_private_data(vma) & flag) != 0;
 }
 
+bool __vma_private_lock(struct vm_area_struct *vma)
+{
+	return !(vma->vm_flags & VM_MAYSHARE) &&
+		get_vma_private_data(vma) & ~HPAGE_RESV_MASK &&
+		is_vma_resv_set(vma, HPAGE_RESV_OWNER);
+}
+
 void hugetlb_dup_vma_private(struct vm_area_struct *vma)
 {
 	VM_BUG_ON_VMA(!is_vm_hugetlb_page(vma), vma);

[PATCH 6.1 124/194] mm: fix oops when filemap_map_pmd() without prealloc_pte

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hugh Dickins <hughd@google.com>

commit 9aa1345d66b8132745ffb99b348b1492088da9e2 upstream.

syzbot reports oops in lockdep's __lock_acquire(), called from
__pte_offset_map_lock() called from filemap_map_pages(); or when I run the
repro, the oops comes in pmd_install(), called from filemap_map_pmd()
called from filemap_map_pages(), just before the __pte_offset_map_lock().

The problem is that filemap_map_pmd() has been assuming that when it finds
pmd_none(), a page table has already been prepared in prealloc_pte; and
indeed do_fault_around() has been careful to preallocate one there, when
it finds pmd_none(): but what if *pmd became none in between?

My 6.6 mods in mm/khugepaged.c, avoiding mmap_lock for write, have made it
easy for *pmd to be cleared while servicing a page fault; but even before
those, a huge *pmd might be zapped while a fault is serviced.

The difference in symptomatic stack traces comes from the "memory model"
in use: pmd_install() uses pmd_populate() uses page_to_pfn(): in some
models that is strict, and will oops on the NULL prealloc_pte; in other
models, it will construct a bogus value to be populated into *pmd, then
__pte_offset_map_lock() oops when trying to access split ptlock pointer
(or some other symptom in normal case of ptlock embedded not pointer).

Link: https://lore.kernel.org/linux-mm/20231115065506.19780-1-jose.pekkarinen@foxhound.fi/
Link: https://lkml.kernel.org/r/6ed0c50c-78ef-0719-b3c5-60c0c010431c@google.com
Fixes: f9ce0be71d1f ("mm: Cleanup faultaround and finish_fault() codepaths")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-and-tested-by: syzbot+89edd67979b52675ddec@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-mm/0000000000005e44550608a0806c@google.com/
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>,
Cc: José Pekkarinen <jose.pekkarinen@foxhound.fi>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>    [5.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/filemap.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -3319,7 +3319,7 @@ static bool filemap_map_pmd(struct vm_fa
 		}
 	}
 
-	if (pmd_none(*vmf->pmd))
+	if (pmd_none(*vmf->pmd) && vmf->prealloc_pte)
 		pmd_install(mm, vmf->pmd, &vmf->prealloc_pte);
 
 	/* See comment in handle_pte_fault() */

[PATCH 6.1 125/194] powercap: DTPM: Fix missing cpufreq_cpu_put() calls

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lukasz Luba <lukasz.luba@arm.com>

commit bdefd9913bdd453991ef756b6f7176e8ad80d786 upstream.

The policy returned by cpufreq_cpu_get() has to be released with
the help of cpufreq_cpu_put() to balance its kobject reference counter
properly.

Add the missing calls to cpufreq_cpu_put() in the code.

Fixes: 0aea2e4ec2a2 ("powercap/dtpm_cpu: Reset per_cpu variable in the release function")
Fixes: 0e8f68d7f048 ("powercap/drivers/dtpm: Add CPU energy model based support")
Cc: v5.16+ <stable@vger.kernel.org> # v5.16+
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/powercap/dtpm_cpu.c |   17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

--- a/drivers/powercap/dtpm_cpu.c
+++ b/drivers/powercap/dtpm_cpu.c
@@ -140,6 +140,8 @@ static void pd_release(struct dtpm *dtpm
 	if (policy) {
 		for_each_cpu(dtpm_cpu->cpu, policy->related_cpus)
 			per_cpu(dtpm_per_cpu, dtpm_cpu->cpu) = NULL;
+
+		cpufreq_cpu_put(policy);
 	}
 	
 	kfree(dtpm_cpu);
@@ -191,12 +193,16 @@ static int __dtpm_cpu_setup(int cpu, str
 		return 0;
 
 	pd = em_cpu_get(cpu);
-	if (!pd || em_is_artificial(pd))
-		return -EINVAL;
+	if (!pd || em_is_artificial(pd)) {
+		ret = -EINVAL;
+		goto release_policy;
+	}
 
 	dtpm_cpu = kzalloc(sizeof(*dtpm_cpu), GFP_KERNEL);
-	if (!dtpm_cpu)
-		return -ENOMEM;
+	if (!dtpm_cpu) {
+		ret = -ENOMEM;
+		goto release_policy;
+	}
 
 	dtpm_init(&dtpm_cpu->dtpm, &dtpm_ops);
 	dtpm_cpu->cpu = cpu;
@@ -216,6 +222,7 @@ static int __dtpm_cpu_setup(int cpu, str
 	if (ret)
 		goto out_dtpm_unregister;
 
+	cpufreq_cpu_put(policy);
 	return 0;
 
 out_dtpm_unregister:
@@ -227,6 +234,8 @@ out_kfree_dtpm_cpu:
 		per_cpu(dtpm_per_cpu, cpu) = NULL;
 	kfree(dtpm_cpu);
 
+release_policy:
+	cpufreq_cpu_put(policy);
 	return ret;
 }
 

[PATCH 6.1 126/194] md/raid6: use valid sector values to determine if an I/O should wait on the reshape

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Jeffery <djeffery@redhat.com>

commit c467e97f079f0019870c314996fae952cc768e82 upstream.

During a reshape or a RAID6 array such as expanding by adding an additional
disk, I/Os to the region of the array which have not yet been reshaped can
stall indefinitely. This is from errors in the stripe_ahead_of_reshape
function causing md to think the I/O is to a region in the actively
undergoing the reshape.

stripe_ahead_of_reshape fails to account for the q disk having a sector
value of 0. By not excluding the q disk from the for loop, raid6 will always
generate a min_sector value of 0, causing a return value which stalls.

The function's max_sector calculation also uses min() when it should use
max(), causing the max_sector value to always be 0. During a backwards
rebuild this can cause the opposite problem where it allows I/O to advance
when it should wait.

Fixing these errors will allow safe I/O to advance in a timely manner and
delay only I/O which is unsafe due to stripes in the middle of undergoing
the reshape.

Fixes: 486f60558607 ("md/raid5: Check all disks in a stripe_head for reshape progress")
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: David Jeffery <djeffery@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231128181233.6187-1-djeffery@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/raid5.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -5905,11 +5905,11 @@ static bool stripe_ahead_of_reshape(stru
 	int dd_idx;
 
 	for (dd_idx = 0; dd_idx < sh->disks; dd_idx++) {
-		if (dd_idx == sh->pd_idx)
+		if (dd_idx == sh->pd_idx || dd_idx == sh->qd_idx)
 			continue;
 
 		min_sector = min(min_sector, sh->dev[dd_idx].sector);
-		max_sector = min(max_sector, sh->dev[dd_idx].sector);
+		max_sector = max(max_sector, sh->dev[dd_idx].sector);
 	}
 
 	spin_lock_irq(&conf->device_lock);

[PATCH 6.1 127/194] arm64: dts: mediatek: mt7622: fix memory node warning check

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eugen Hristev <eugen.hristev@collabora.com>

commit 8e6ecbfd44b5542a7598c1c5fc9c6dcb5d367f2a upstream.

dtbs_check throws a warning at the memory node:
Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name

fix by adding the address into the node name.

Cc: stable@vger.kernel.org
Fixes: 0b6286dd96c0 ("arm64: dts: mt7622: add bananapi BPI-R64 board")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230814065042.4973-1-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts |    2 +-
 arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts             |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -72,7 +72,7 @@
 		};
 	};
 
-	memory {
+	memory@40000000 {
 		reg = <0 0x40000000 0 0x40000000>;
 	};
 
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -54,7 +54,7 @@
 		};
 	};
 
-	memory {
+	memory@40000000 {
 		reg = <0 0x40000000 0 0x20000000>;
 	};
 

[PATCH 6.1 128/194] arm64: dts: mediatek: mt8183-kukui-jacuzzi: fix dsi unnecessary cells properties

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eugen Hristev <eugen.hristev@collabora.com>

commit 74543b303a9abfe4fa253d1fa215281baa05ff3a upstream.

dtbs_check throws a warning at the dsi node:
Warning (avoid_unnecessary_addr_size): /soc/dsi@14014000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property

Other DTS have a panel child node with a reg, so the parent dtsi
must have the address-cells and size-cells, however this specific DT
has the panel removed, but not the cells, hence the warning above.

If panel is deleted then the cells must also be deleted since they are
tied together, as the child node in this DT does not have a reg.

Cc: stable@vger.kernel.org
Fixes: cabc71b08eb5 ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230814071053.5459-1-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -101,6 +101,8 @@
 
 &dsi0 {
 	status = "okay";
+	/delete-property/#size-cells;
+	/delete-property/#address-cells;
 	/delete-node/panel@0;
 	ports {
 		port {

[PATCH 6.1 129/194] arm64: dts: mediatek: cherry: Fix interrupt cells for MT6360 on I2C7

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

commit 5943b8f7449df9881b273db07bdde1e7120dccf0 upstream.

Change interrupt cells to 2 to suppress interrupts_property warning.

Cc: stable@vger.kernel.org
Fixes: 0de0fe950f1b ("arm64: dts: mediatek: cherry: Enable MT6360 sub-pmic on I2C7")
Link: https://lore.kernel.org/r/20231127132026.165027-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
@@ -207,7 +207,7 @@
 	pinctrl-0 = <&i2c7_pins>;
 
 	pmic@34 {
-		#interrupt-cells = <1>;
+		#interrupt-cells = <2>;
 		compatible = "mediatek,mt6360";
 		reg = <0x34>;
 		interrupt-controller;

[PATCH 6.1 130/194] arm64: dts: mediatek: mt8173-evb: Fix regulator-fixed node names

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

commit 24165c5dad7ba7c7624d05575a5e0cc851396c71 upstream.

Fix a unit_address_vs_reg warning for the USB VBUS fixed regulators
by renaming the regulator nodes from regulator@{0,1} to regulator-usb-p0
and regulator-usb-p1.

Cc: stable@vger.kernel.org
Fixes: c0891284a74a ("arm64: dts: mediatek: add USB3 DRD driver")
Link: https://lore.kernel.org/r/20231025093816.44327-8-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/boot/dts/mediatek/mt8173-evb.dts |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -43,7 +43,7 @@
 		id-gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
 	};
 
-	usb_p1_vbus: regulator@0 {
+	usb_p1_vbus: regulator-usb-p1 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -52,7 +52,7 @@
 		enable-active-high;
 	};
 
-	usb_p0_vbus: regulator@1 {
+	usb_p0_vbus: regulator-usb-p0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbus";
 		regulator-min-microvolt = <5000000>;

[PATCH 6.1 131/194] arm64: dts: mediatek: mt8195: Fix PM suspend/resume with venc clocks

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

commit 61b94d54421a1f3670ddd5396ec70afe833e9405 upstream.

Before suspending the LARBs we're making sure that any operation is
done: this never happens because we are unexpectedly unclocking the
LARB20 before executing the suspend handler for the MediaTek Smart
Multimedia Interface (SMI) and the cause of this is incorrect clocks
on this LARB.

Fix this issue by changing the Local Arbiter 20 (used by the video
encoder secondary core) apb clock to CLK_VENC_CORE1_VENC;
furthermore, in order to make sure that both the PM resume and video
encoder operation is stable, add the CLK_VENC(_CORE1)_LARB clock to
the VENC (main core) and VENC_CORE1 power domains, as this IP cannot
communicate with the rest of the system (the AP) without local
arbiter clocks being operational.

Cc: stable@vger.kernel.org
Fixes: 3b5838d1d82e ("arm64: dts: mt8195: Add iommu and smi nodes")
Fixes: 2b515194bf0c ("arm64: dts: mt8195: Add power domains controller")
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230706095841.109315-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/boot/dts/mediatek/mt8195.dtsi |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -471,6 +471,8 @@
 
 					power-domain@MT8195_POWER_DOMAIN_VENC_CORE1 {
 						reg = <MT8195_POWER_DOMAIN_VENC_CORE1>;
+						clocks = <&vencsys_core1 CLK_VENC_CORE1_LARB>;
+						clock-names = "venc1-larb";
 						mediatek,infracfg = <&infracfg_ao>;
 						#power-domain-cells = <0>;
 					};
@@ -533,6 +535,8 @@
 
 						power-domain@MT8195_POWER_DOMAIN_VENC {
 							reg = <MT8195_POWER_DOMAIN_VENC>;
+							clocks = <&vencsys CLK_VENC_LARB>;
+							clock-names = "venc0-larb";
 							mediatek,infracfg = <&infracfg_ao>;
 							#power-domain-cells = <0>;
 						};
@@ -1985,7 +1989,7 @@
 			reg = <0 0x1b010000 0 0x1000>;
 			mediatek,larb-id = <20>;
 			mediatek,smi = <&smi_common_vpp>;
-			clocks = <&vencsys_core1 CLK_VENC_CORE1_LARB>,
+			clocks = <&vencsys_core1 CLK_VENC_CORE1_VENC>,
 				 <&vencsys_core1 CLK_VENC_CORE1_GALS>,
 				 <&vppsys0 CLK_VPP0_GALS_VDO0_VDO1_VENCSYS_CORE1>;
 			clock-names = "apb", "smi", "gals";

[PATCH 6.1 132/194] arm64: dts: mediatek: mt8183: Fix unit address for scp reserved memory

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

commit 19cba9a6c071db57888dc6b2ec1d9bf8996ea681 upstream.

The reserved memory for scp had node name "scp_mem_region" and also
without unit-address: change the name to "memory@(address)".
This fixes a unit_address_vs_reg warning.

Cc: stable@vger.kernel.org
Fixes: 1652dbf7363a ("arm64: dts: mt8183: add scp node")
Link: https://lore.kernel.org/r/20231025093816.44327-6-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/boot/dts/mediatek/mt8183-evb.dts    |    2 +-
 arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
@@ -30,7 +30,7 @@
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
-		scp_mem_reserved: scp_mem_region {
+		scp_mem_reserved: memory@50000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0x50000000 0 0x2900000>;
 			no-map;
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -108,7 +108,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		scp_mem_reserved: scp_mem_region {
+		scp_mem_reserved: memory@50000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0x50000000 0 0x2900000>;
 			no-map;

[PATCH 6.1 133/194] arm64: dts: mediatek: mt8183: Move thermal-zones to the root node

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

commit 5a60d63439694590cd5ab1f998fc917ff7ba1c1d upstream.

The thermal zones are not a soc bus device: move it to the root
node to solve simple_bus_reg warnings.

Cc: stable@vger.kernel.org
Fixes: b325ce39785b ("arm64: dts: mt8183: add thermal zone node")
Link: https://lore.kernel.org/r/20231025093816.44327-9-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/boot/dts/mediatek/mt8183.dtsi |  242 +++++++++++++++----------------
 1 file changed, 121 insertions(+), 121 deletions(-)

--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -1136,127 +1136,6 @@
 			nvmem-cell-names = "calibration-data";
 		};
 
-		thermal_zones: thermal-zones {
-			cpu_thermal: cpu-thermal {
-				polling-delay-passive = <100>;
-				polling-delay = <500>;
-				thermal-sensors = <&thermal 0>;
-				sustainable-power = <5000>;
-
-				trips {
-					threshold: trip-point0 {
-						temperature = <68000>;
-						hysteresis = <2000>;
-						type = "passive";
-					};
-
-					target: trip-point1 {
-						temperature = <80000>;
-						hysteresis = <2000>;
-						type = "passive";
-					};
-
-					cpu_crit: cpu-crit {
-						temperature = <115000>;
-						hysteresis = <2000>;
-						type = "critical";
-					};
-				};
-
-				cooling-maps {
-					map0 {
-						trip = <&target>;
-						cooling-device = <&cpu0
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-								 <&cpu1
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-								 <&cpu2
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-								 <&cpu3
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>;
-						contribution = <3072>;
-					};
-					map1 {
-						trip = <&target>;
-						cooling-device = <&cpu4
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-								 <&cpu5
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-								 <&cpu6
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-								 <&cpu7
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>;
-						contribution = <1024>;
-					};
-				};
-			};
-
-			/* The tzts1 ~ tzts6 don't need to polling */
-			/* The tzts1 ~ tzts6 don't need to thermal throttle */
-
-			tzts1: tzts1 {
-				polling-delay-passive = <0>;
-				polling-delay = <0>;
-				thermal-sensors = <&thermal 1>;
-				sustainable-power = <5000>;
-				trips {};
-				cooling-maps {};
-			};
-
-			tzts2: tzts2 {
-				polling-delay-passive = <0>;
-				polling-delay = <0>;
-				thermal-sensors = <&thermal 2>;
-				sustainable-power = <5000>;
-				trips {};
-				cooling-maps {};
-			};
-
-			tzts3: tzts3 {
-				polling-delay-passive = <0>;
-				polling-delay = <0>;
-				thermal-sensors = <&thermal 3>;
-				sustainable-power = <5000>;
-				trips {};
-				cooling-maps {};
-			};
-
-			tzts4: tzts4 {
-				polling-delay-passive = <0>;
-				polling-delay = <0>;
-				thermal-sensors = <&thermal 4>;
-				sustainable-power = <5000>;
-				trips {};
-				cooling-maps {};
-			};
-
-			tzts5: tzts5 {
-				polling-delay-passive = <0>;
-				polling-delay = <0>;
-				thermal-sensors = <&thermal 5>;
-				sustainable-power = <5000>;
-				trips {};
-				cooling-maps {};
-			};
-
-			tztsABB: tztsABB {
-				polling-delay-passive = <0>;
-				polling-delay = <0>;
-				thermal-sensors = <&thermal 6>;
-				sustainable-power = <5000>;
-				trips {};
-				cooling-maps {};
-			};
-		};
-
 		pwm0: pwm@1100e000 {
 			compatible = "mediatek,mt8183-disp-pwm";
 			reg = <0 0x1100e000 0 0x1000>;
@@ -2031,4 +1910,125 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_CAM>;
 		};
 	};
+
+	thermal_zones: thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <500>;
+			thermal-sensors = <&thermal 0>;
+			sustainable-power = <5000>;
+
+			trips {
+				threshold: trip-point0 {
+					temperature = <68000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				target: trip-point1 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu-crit {
+					temperature = <115000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu1
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu2
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu3
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+					contribution = <3072>;
+				};
+				map1 {
+					trip = <&target>;
+					cooling-device = <&cpu4
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu5
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu6
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu7
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+					contribution = <1024>;
+				};
+			};
+		};
+
+		/* The tzts1 ~ tzts6 don't need to polling */
+		/* The tzts1 ~ tzts6 don't need to thermal throttle */
+
+		tzts1: tzts1 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 1>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tzts2: tzts2 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 2>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tzts3: tzts3 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 3>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tzts4: tzts4 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 4>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tzts5: tzts5 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 5>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tztsABB: tztsABB {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 6>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+	};
 };

[PATCH 6.1 134/194] arm64: dts: mediatek: mt8183-evb: Fix unit_address_vs_reg warning on ntc

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

commit 9dea1c724fc36643e83216c1f5a26613412150db upstream.

The NTC is defined as ntc@0 but it doesn't need any address at all.
Fix the unit_address_vs_reg warning by dropping the unit address: since
the node name has to be generic also fully rename it from ntc@0 to
thermal-sensor.

Cc: stable@vger.kernel.org
Fixes: ff9ea5c62279 ("arm64: dts: mediatek: mt8183-evb: Add node for thermistor")
Link: https://lore.kernel.org/r/20231025093816.44327-7-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/boot/dts/mediatek/mt8183-evb.dts |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
@@ -37,7 +37,7 @@
 		};
 	};
 
-	ntc@0 {
+	thermal-sensor {
 		compatible = "murata,ncp03wf104";
 		pullup-uv = <1800000>;
 		pullup-ohm = <390000>;

[PATCH 6.1 135/194] binder: fix memory leaks of spam and pending work

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Carlos Llamas <cmllamas@google.com>

commit 1aa3aaf8953c84bad398adf6c3cabc9d6685bf7d upstream

A transaction complete work is allocated and queued for each
transaction. Under certain conditions the work->type might be marked as
BINDER_WORK_TRANSACTION_ONEWAY_SPAM_SUSPECT to notify userspace about
potential spamming threads or as BINDER_WORK_TRANSACTION_PENDING when
the target is currently frozen.

However, these work types are not being handled in binder_release_work()
so they will leak during a cleanup. This was reported by syzkaller with
the following kmemleak dump:

BUG: memory leak
unreferenced object 0xffff88810e2d6de0 (size 32):
  comm "syz-executor338", pid 5046, jiffies 4294968230 (age 13.590s)
  hex dump (first 32 bytes):
    e0 6d 2d 0e 81 88 ff ff e0 6d 2d 0e 81 88 ff ff  .m-......m-.....
    04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff81573b75>] kmalloc_trace+0x25/0x90 mm/slab_common.c:1114
    [<ffffffff83d41873>] kmalloc include/linux/slab.h:599 [inline]
    [<ffffffff83d41873>] kzalloc include/linux/slab.h:720 [inline]
    [<ffffffff83d41873>] binder_transaction+0x573/0x4050 drivers/android/binder.c:3152
    [<ffffffff83d45a05>] binder_thread_write+0x6b5/0x1860 drivers/android/binder.c:4010
    [<ffffffff83d486dc>] binder_ioctl_write_read drivers/android/binder.c:5066 [inline]
    [<ffffffff83d486dc>] binder_ioctl+0x1b2c/0x3cf0 drivers/android/binder.c:5352
    [<ffffffff816b25f2>] vfs_ioctl fs/ioctl.c:51 [inline]
    [<ffffffff816b25f2>] __do_sys_ioctl fs/ioctl.c:871 [inline]
    [<ffffffff816b25f2>] __se_sys_ioctl fs/ioctl.c:857 [inline]
    [<ffffffff816b25f2>] __x64_sys_ioctl+0xf2/0x140 fs/ioctl.c:857
    [<ffffffff84b30008>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    [<ffffffff84b30008>] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
    [<ffffffff84c0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fix the leaks by kfreeing these work types in binder_release_work() and
handle them as a BINDER_WORK_TRANSACTION_COMPLETE cleanup.

Cc: stable@vger.kernel.org
Fixes: a7dc1e6f99df ("binder: tell userspace to dump current backtrace when detected oneway spamming")
Reported-by: syzbot+7f10c1653e35933c0f1e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7f10c1653e35933c0f1e
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20230922175138.230331-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[cmllamas: backport to v6.1 by dropping BINDER_WORK_TRANSACTION_PENDING
 as commit 0567461a7a6e is not present. Remove fixes tag accordingly.]
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/android/binder.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/android/binder.c b/drivers/android/binder.c
index e4a6da81cd4b3..9cc3a2b1b4fc1 100644
--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -4788,6 +4788,7 @@ static void binder_release_work(struct binder_proc *proc,
 				"undelivered TRANSACTION_ERROR: %u\n",
 				e->cmd);
 		} break;
+		case BINDER_WORK_TRANSACTION_ONEWAY_SPAM_SUSPECT:
 		case BINDER_WORK_TRANSACTION_COMPLETE: {
 			binder_debug(BINDER_DEBUG_DEAD_TRANSACTION,
 				"undelivered TRANSACTION_COMPLETE\n");
-- 
2.42.0

[PATCH 6.1 136/194] coresight: etm4x: Make etm4_remove_dev() return void

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit c5f231f1a7e18d28e02b282d33541d31358360e4 ]

etm4_remove_dev() returned zero unconditionally. Make it return void
instead, which makes it clear in the callers that there is no error to
handle. Simplify etm4_remove_platform_dev() accordingly.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230518201629.260672-1-u.kleine-koenig@pengutronix.de
Stable-dep-of: 348ddab81f7b ("coresight: etm4x: Remove bogous __exit annotation for some functions")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwtracing/coresight/coresight-etm4x-core.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c
index 1cf7478da6ee8..fd52fd64c6b13 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-core.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c
@@ -2072,7 +2072,7 @@ static void clear_etmdrvdata(void *info)
 	etmdrvdata[cpu] = NULL;
 }
 
-static int __exit etm4_remove_dev(struct etmv4_drvdata *drvdata)
+static void __exit etm4_remove_dev(struct etmv4_drvdata *drvdata)
 {
 	etm_perf_symlink(drvdata->csdev, false);
 	/*
@@ -2094,7 +2094,6 @@ static int __exit etm4_remove_dev(struct etmv4_drvdata *drvdata)
 	cscfg_unregister_csdev(drvdata->csdev);
 	coresight_unregister(drvdata->csdev);
 
-	return 0;
 }
 
 static void __exit etm4_remove_amba(struct amba_device *adev)
@@ -2107,13 +2106,12 @@ static void __exit etm4_remove_amba(struct amba_device *adev)
 
 static int __exit etm4_remove_platform_dev(struct platform_device *pdev)
 {
-	int ret = 0;
 	struct etmv4_drvdata *drvdata = dev_get_drvdata(&pdev->dev);
 
 	if (drvdata)
-		ret = etm4_remove_dev(drvdata);
+		etm4_remove_dev(drvdata);
 	pm_runtime_disable(&pdev->dev);
-	return ret;
+	return 0;
 }
 
 static const struct amba_id etm4_ids[] = {
-- 
2.42.0

[PATCH 6.1 137/194] coresight: etm4x: Remove bogous __exit annotation for some functions

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit 348ddab81f7b0983d9fb158df910254f08d3f887 ]

etm4_platform_driver (which lives in ".data" contains a reference to
etm4_remove_platform_dev(). So the latter must not be marked with __exit
which results in the function being discarded for a build with
CONFIG_CORESIGHT_SOURCE_ETM4X=y which in turn makes the remove pointer
contain invalid data.

etm4x_amba_driver referencing etm4_remove_amba() has the same issue.

Drop the __exit annotations for the two affected functions and a third
one that is called by the other two.

For reasons I don't understand this isn't catched by building with
CONFIG_DEBUG_SECTION_MISMATCH=y.

Fixes: c23bc382ef0e ("coresight: etm4x: Refactor probing routine")
Fixes: 5214b563588e ("coresight: etm4x: Add support for sysreg only devices")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/all/20230929081540.yija47lsj35xtj4v@pengutronix.de/
Link: https://lore.kernel.org/r/20230929081637.2377335-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwtracing/coresight/coresight-etm4x-core.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c
index fd52fd64c6b13..fda48a0afc1a5 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-core.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c
@@ -2072,7 +2072,7 @@ static void clear_etmdrvdata(void *info)
 	etmdrvdata[cpu] = NULL;
 }
 
-static void __exit etm4_remove_dev(struct etmv4_drvdata *drvdata)
+static void etm4_remove_dev(struct etmv4_drvdata *drvdata)
 {
 	etm_perf_symlink(drvdata->csdev, false);
 	/*
@@ -2096,7 +2096,7 @@ static void __exit etm4_remove_dev(struct etmv4_drvdata *drvdata)
 
 }
 
-static void __exit etm4_remove_amba(struct amba_device *adev)
+static void etm4_remove_amba(struct amba_device *adev)
 {
 	struct etmv4_drvdata *drvdata = dev_get_drvdata(&adev->dev);
 
@@ -2104,7 +2104,7 @@ static void __exit etm4_remove_amba(struct amba_device *adev)
 		etm4_remove_dev(drvdata);
 }
 
-static int __exit etm4_remove_platform_dev(struct platform_device *pdev)
+static int etm4_remove_platform_dev(struct platform_device *pdev)
 {
 	struct etmv4_drvdata *drvdata = dev_get_drvdata(&pdev->dev);
 
-- 
2.42.0

[PATCH 6.1 138/194] hwtracing: hisi_ptt: Add dummy callback pmu::read()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Junhao He <hejunhao3@huawei.com>

[ Upstream commit 55e0a2fb0cb5ab7c9c99c1ad4d3e6954de8b73a0 ]

When start trace with perf option "-C $cpu" and immediately stop it
with SIGTERM or others, the perf core will invoke pmu::read() while
the driver doesn't implement it. Add a dummy pmu::read() to avoid
any issues.

Fixes: ff0de066b463 ("hwtracing: hisi_ptt: Add trace function support for HiSilicon PCIe Tune and Trace device")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231010084731.30450-6-yangyicong@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwtracing/ptt/hisi_ptt.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/hwtracing/ptt/hisi_ptt.c b/drivers/hwtracing/ptt/hisi_ptt.c
index 4140efd664097..016220ba0addd 100644
--- a/drivers/hwtracing/ptt/hisi_ptt.c
+++ b/drivers/hwtracing/ptt/hisi_ptt.c
@@ -837,6 +837,10 @@ static void hisi_ptt_pmu_del(struct perf_event *event, int flags)
 	hisi_ptt_pmu_stop(event, PERF_EF_UPDATE);
 }
 
+static void hisi_ptt_pmu_read(struct perf_event *event)
+{
+}
+
 static void hisi_ptt_remove_cpuhp_instance(void *hotplug_node)
 {
 	cpuhp_state_remove_instance_nocalls(hisi_ptt_pmu_online, hotplug_node);
@@ -880,6 +884,7 @@ static int hisi_ptt_register_pmu(struct hisi_ptt *hisi_ptt)
 		.stop		= hisi_ptt_pmu_stop,
 		.add		= hisi_ptt_pmu_add,
 		.del		= hisi_ptt_pmu_del,
+		.read		= hisi_ptt_pmu_read,
 	};
 
 	reg = readl(hisi_ptt->iobase + HISI_PTT_LOCATION);
-- 
2.42.0

[PATCH 6.1 139/194] misc: mei: client.c: return negative error code in mei_cl_write

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Su Hui <suhui@nfschina.com>

[ Upstream commit 8f06aee8089cf42fd99a20184501bd1347ce61b9 ]

mei_msg_hdr_init() return negative error code, rets should be
'PTR_ERR(mei_hdr)' rather than '-PTR_ERR(mei_hdr)'.

Fixes: 0cd7c01a60f8 ("mei: add support for mei extended header.")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231120095523.178385-1-suhui@nfschina.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/mei/client.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c
index 0b2fbe1335a77..77501e392cdeb 100644
--- a/drivers/misc/mei/client.c
+++ b/drivers/misc/mei/client.c
@@ -1978,7 +1978,7 @@ ssize_t mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb)
 
 	mei_hdr = mei_msg_hdr_init(cb);
 	if (IS_ERR(mei_hdr)) {
-		rets = -PTR_ERR(mei_hdr);
+		rets = PTR_ERR(mei_hdr);
 		mei_hdr = NULL;
 		goto err;
 	}
-- 
2.42.0

[PATCH 6.1 140/194] misc: mei: client.c: fix problem of return -EOVERFLOW in mei_cl_write

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Su Hui <suhui@nfschina.com>

[ Upstream commit ee6236027218f8531916f1c5caa5dc330379f287 ]

Clang static analyzer complains that value stored to 'rets' is never
read.Let 'buf_len = -EOVERFLOW' to make sure we can return '-EOVERFLOW'.

Fixes: 8c8d964ce90f ("mei: move hbuf_depth from the mei device to the hw modules")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231120095523.178385-2-suhui@nfschina.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/mei/client.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c
index 77501e392cdeb..c70c89209fe55 100644
--- a/drivers/misc/mei/client.c
+++ b/drivers/misc/mei/client.c
@@ -2002,7 +2002,7 @@ ssize_t mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb)
 
 	hbuf_slots = mei_hbuf_empty_slots(dev);
 	if (hbuf_slots < 0) {
-		rets = -EOVERFLOW;
+		buf_len = -EOVERFLOW;
 		goto out;
 	}
 
-- 
2.42.0

[PATCH 6.1 141/194] LoongArch: BPF: Dont sign extend memory load operand

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hengqi Chen <hengqi.chen@gmail.com>

[ Upstream commit fe5757553bf9ebe45ae8ecab5922f6937c8d8dfc ]

The `cgrp_local_storage` test triggers a kernel panic like:

  # ./test_progs -t cgrp_local_storage
  Can't find bpf_testmod.ko kernel module: -2
  WARNING! Selftests relying on bpf_testmod.ko will be skipped.
  [  550.930632] CPU 1 Unable to handle kernel paging request at virtual address 0000000000000080, era == ffff80000200be34, ra == ffff80000200be00
  [  550.931781] Oops[#1]:
  [  550.931966] CPU: 1 PID: 1303 Comm: test_progs Not tainted 6.7.0-rc2-loong-devel-g2f56bb0d2327 #35 a896aca3f4164f09cc346f89f2e09832e07be5f6
  [  550.932215] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022
  [  550.932403] pc ffff80000200be34 ra ffff80000200be00 tp 9000000108350000 sp 9000000108353dc0
  [  550.932545] a0 0000000000000000 a1 0000000000000517 a2 0000000000000118 a3 00007ffffbb15558
  [  550.932682] a4 00007ffffbb15620 a5 90000001004e7700 a6 0000000000000021 a7 0000000000000118
  [  550.932824] t0 ffff80000200bdc0 t1 0000000000000517 t2 0000000000000517 t3 00007ffff1c06ee0
  [  550.932961] t4 0000555578ae04d0 t5 fffffffffffffff8 t6 0000000000000004 t7 0000000000000020
  [  550.933097] t8 0000000000000040 u0 00000000000007b8 s9 9000000108353e00 s0 90000001004e7700
  [  550.933241] s1 9000000004005000 s2 0000000000000001 s3 0000000000000000 s4 0000555555eb2ec8
  [  550.933379] s5 00007ffffbb15bb8 s6 00007ffff1dafd60 s7 000055555663f610 s8 00007ffff1db0050
  [  550.933520]    ra: ffff80000200be00 bpf_prog_98f1b9e767be2a84_on_enter+0x40/0x200
  [  550.933911]   ERA: ffff80000200be34 bpf_prog_98f1b9e767be2a84_on_enter+0x74/0x200
  [  550.934105]  CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
  [  550.934596]  PRMD: 00000004 (PPLV0 +PIE -PWE)
  [  550.934712]  EUEN: 00000003 (+FPE +SXE -ASXE -BTE)
  [  550.934836]  ECFG: 00071c1c (LIE=2-4,10-12 VS=7)
  [  550.934976] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0)
  [  550.935097]  BADV: 0000000000000080
  [  550.935181]  PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
  [  550.935291] Modules linked in:
  [  550.935391] Process test_progs (pid: 1303, threadinfo=000000006c3b1c41, task=0000000061f84a55)
  [  550.935643] Stack : 00007ffffbb15bb8 0000555555eb2ec8 0000000000000000 0000000000000001
  [  550.935844]         9000000004005000 ffff80001b864000 00007ffffbb15450 90000000029aa034
  [  550.935990]         0000000000000000 9000000108353ec0 0000000000000118 d07d9dfb09721a09
  [  550.936175]         0000000000000001 0000000000000000 9000000108353ec0 0000000000000118
  [  550.936314]         9000000101d46ad0 900000000290abf0 000055555663f610 0000000000000000
  [  550.936479]         0000000000000003 9000000108353ec0 00007ffffbb15450 90000000029d7288
  [  550.936635]         00007ffff1dafd60 000055555663f610 0000000000000000 0000000000000003
  [  550.936779]         9000000108353ec0 90000000035dd1f0 00007ffff1dafd58 9000000002841c5c
  [  550.936939]         0000000000000119 0000555555eea5a8 00007ffff1d78780 00007ffffbb153e0
  [  550.937083]         ffffffffffffffda 00007ffffbb15518 0000000000000040 00007ffffbb15558
  [  550.937224]         ...
  [  550.937299] Call Trace:
  [  550.937521] [<ffff80000200be34>] bpf_prog_98f1b9e767be2a84_on_enter+0x74/0x200
  [  550.937910] [<90000000029aa034>] bpf_trace_run2+0x90/0x154
  [  550.938105] [<900000000290abf0>] syscall_trace_enter.isra.0+0x1cc/0x200
  [  550.938224] [<90000000035dd1f0>] do_syscall+0x48/0x94
  [  550.938319] [<9000000002841c5c>] handle_syscall+0xbc/0x158
  [  550.938477]
  [  550.938607] Code: 580009ae  50016000  262402e4 <28c20085> 14092084  03a00084  16000024  03240084  00150006
  [  550.938851]
  [  550.939021] ---[ end trace 0000000000000000 ]---

Further investigation shows that this panic is triggered by memory
load operations:

  ptr = bpf_cgrp_storage_get(&map_a, task->cgroups->dfl_cgrp, 0,
                             BPF_LOCAL_STORAGE_GET_F_CREATE);

The expression `task->cgroups->dfl_cgrp` involves two memory load.
Since the field offset fits in imm12 or imm14, we use ldd or ldptrd
instructions. But both instructions have the side effect that it will
signed-extended the imm operand. Finally, we got the wrong addresses
and panics is inevitable.

Use a generic ldxd instruction to avoid this kind of issues.

With this change, we have:

  # ./test_progs -t cgrp_local_storage
  Can't find bpf_testmod.ko kernel module: -2
  WARNING! Selftests relying on bpf_testmod.ko will be skipped.
  test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec
  #48/1    cgrp_local_storage/tp_btf:OK
  test_attach_cgroup:PASS:skel_open 0 nsec
  test_attach_cgroup:PASS:prog_attach 0 nsec
  test_attach_cgroup:PASS:prog_attach 0 nsec
  libbpf: prog 'update_cookie_tracing': failed to attach: ERROR: strerror_r(-524)=22
  test_attach_cgroup:FAIL:prog_attach unexpected error: -524
  #48/2    cgrp_local_storage/attach_cgroup:FAIL
  test_recursion:PASS:skel_open_and_load 0 nsec
  libbpf: prog 'on_lookup': failed to attach: ERROR: strerror_r(-524)=22
  libbpf: prog 'on_lookup': failed to auto-attach: -524
  test_recursion:FAIL:skel_attach unexpected error: -524 (errno 524)
  #48/3    cgrp_local_storage/recursion:FAIL
  #48/4    cgrp_local_storage/negative:OK
  #48/5    cgrp_local_storage/cgroup_iter_sleepable:OK
  test_yes_rcu_lock:PASS:skel_open 0 nsec
  test_yes_rcu_lock:PASS:skel_load 0 nsec
  libbpf: prog 'yes_rcu_lock': failed to attach: ERROR: strerror_r(-524)=22
  libbpf: prog 'yes_rcu_lock': failed to auto-attach: -524
  test_yes_rcu_lock:FAIL:skel_attach unexpected error: -524 (errno 524)
  #48/6    cgrp_local_storage/yes_rcu_lock:FAIL
  #48/7    cgrp_local_storage/no_rcu_lock:OK
  #48      cgrp_local_storage:FAIL

  All error logs:
  test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec
  test_attach_cgroup:PASS:skel_open 0 nsec
  test_attach_cgroup:PASS:prog_attach 0 nsec
  test_attach_cgroup:PASS:prog_attach 0 nsec
  libbpf: prog 'update_cookie_tracing': failed to attach: ERROR: strerror_r(-524)=22
  test_attach_cgroup:FAIL:prog_attach unexpected error: -524
  #48/2    cgrp_local_storage/attach_cgroup:FAIL
  test_recursion:PASS:skel_open_and_load 0 nsec
  libbpf: prog 'on_lookup': failed to attach: ERROR: strerror_r(-524)=22
  libbpf: prog 'on_lookup': failed to auto-attach: -524
  test_recursion:FAIL:skel_attach unexpected error: -524 (errno 524)
  #48/3    cgrp_local_storage/recursion:FAIL
  test_yes_rcu_lock:PASS:skel_open 0 nsec
  test_yes_rcu_lock:PASS:skel_load 0 nsec
  libbpf: prog 'yes_rcu_lock': failed to attach: ERROR: strerror_r(-524)=22
  libbpf: prog 'yes_rcu_lock': failed to auto-attach: -524
  test_yes_rcu_lock:FAIL:skel_attach unexpected error: -524 (errno 524)
  #48/6    cgrp_local_storage/yes_rcu_lock:FAIL
  #48      cgrp_local_storage:FAIL
  Summary: 0/4 PASSED, 0 SKIPPED, 1 FAILED

No panics any more (The test still failed because lack of BPF trampoline
which I am actively working on).

Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support")
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/loongarch/net/bpf_jit.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

diff --git a/arch/loongarch/net/bpf_jit.c b/arch/loongarch/net/bpf_jit.c
index 82b4402810da0..20ad5f3a9bf94 100644
--- a/arch/loongarch/net/bpf_jit.c
+++ b/arch/loongarch/net/bpf_jit.c
@@ -844,14 +844,8 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, bool ext
 			}
 			break;
 		case BPF_DW:
-			if (is_signed_imm12(off)) {
-				emit_insn(ctx, ldd, dst, src, off);
-			} else if (is_signed_imm14(off)) {
-				emit_insn(ctx, ldptrd, dst, src, off);
-			} else {
-				move_imm(ctx, t1, off, is32);
-				emit_insn(ctx, ldxd, dst, src, t1);
-			}
+			move_imm(ctx, t1, off, is32);
+			emit_insn(ctx, ldxd, dst, src, t1);
 			break;
 		}
 		break;
-- 
2.42.0

[PATCH 6.1 142/194] LoongArch: BPF: Dont sign extend function return value

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hengqi Chen <hengqi.chen@gmail.com>

[ Upstream commit 5d47ec2e6f4c64e30e392cfe9532df98c9beb106 ]

The `cls_redirect` test triggers a kernel panic like:

  # ./test_progs -t cls_redirect
  Can't find bpf_testmod.ko kernel module: -2
  WARNING! Selftests relying on bpf_testmod.ko will be skipped.
  [   30.938489] CPU 3 Unable to handle kernel paging request at virtual address fffffffffd814de0, era == ffff800002009fb8, ra == ffff800002009f9c
  [   30.939331] Oops[#1]:
  [   30.939513] CPU: 3 PID: 1260 Comm: test_progs Not tainted 6.7.0-rc2-loong-devel-g2f56bb0d2327 #35 a896aca3f4164f09cc346f89f2e09832e07be5f6
  [   30.939732] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022
  [   30.939901] pc ffff800002009fb8 ra ffff800002009f9c tp 9000000104da4000 sp 9000000104da7ab0
  [   30.940038] a0 fffffffffd814de0 a1 9000000104da7a68 a2 0000000000000000 a3 9000000104da7c10
  [   30.940183] a4 9000000104da7c14 a5 0000000000000002 a6 0000000000000021 a7 00005555904d7f90
  [   30.940321] t0 0000000000000110 t1 0000000000000000 t2 fffffffffd814de0 t3 0004c4b400000000
  [   30.940456] t4 ffffffffffffffff t5 00000000c3f63600 t6 0000000000000000 t7 0000000000000000
  [   30.940590] t8 000000000006d803 u0 0000000000000020 s9 9000000104da7b10 s0 900000010504c200
  [   30.940727] s1 fffffffffd814de0 s2 900000010504c200 s3 9000000104da7c10 s4 9000000104da7ad0
  [   30.940866] s5 0000000000000000 s6 90000000030e65bc s7 9000000104da7b44 s8 90000000044f6fc0
  [   30.941015]    ra: ffff800002009f9c bpf_prog_846803e5ae81417f_cls_redirect+0xa0/0x590
  [   30.941535]   ERA: ffff800002009fb8 bpf_prog_846803e5ae81417f_cls_redirect+0xbc/0x590
  [   30.941696]  CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
  [   30.942224]  PRMD: 00000004 (PPLV0 +PIE -PWE)
  [   30.942330]  EUEN: 00000003 (+FPE +SXE -ASXE -BTE)
  [   30.942453]  ECFG: 00071c1c (LIE=2-4,10-12 VS=7)
  [   30.942612] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0)
  [   30.942764]  BADV: fffffffffd814de0
  [   30.942854]  PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
  [   30.942974] Modules linked in:
  [   30.943078] Process test_progs (pid: 1260, threadinfo=00000000ce303226, task=000000007d10bb76)
  [   30.943306] Stack : 900000010a064000 90000000044f6fc0 9000000104da7b48 0000000000000000
  [   30.943495]         0000000000000000 9000000104da7c14 9000000104da7c10 900000010504c200
  [   30.943626]         0000000000000001 ffff80001b88c000 9000000104da7b70 90000000030e6668
  [   30.943785]         0000000000000000 9000000104da7b58 ffff80001b88c048 9000000003d05000
  [   30.943936]         900000000303ac88 0000000000000000 0000000000000000 9000000104da7b70
  [   30.944091]         0000000000000000 0000000000000001 0000000731eeab00 0000000000000000
  [   30.944245]         ffff80001b88c000 0000000000000000 0000000000000000 54b99959429f83b8
  [   30.944402]         ffff80001b88c000 90000000044f6fc0 9000000101d70000 ffff80001b88c000
  [   30.944538]         000000000000005a 900000010504c200 900000010a064000 900000010a067000
  [   30.944697]         9000000104da7d88 0000000000000000 9000000003d05000 90000000030e794c
  [   30.944852]         ...
  [   30.944924] Call Trace:
  [   30.945120] [<ffff800002009fb8>] bpf_prog_846803e5ae81417f_cls_redirect+0xbc/0x590
  [   30.945650] [<90000000030e6668>] bpf_test_run+0x1ec/0x2f8
  [   30.945958] [<90000000030e794c>] bpf_prog_test_run_skb+0x31c/0x684
  [   30.946065] [<90000000026d4f68>] __sys_bpf+0x678/0x2724
  [   30.946159] [<90000000026d7288>] sys_bpf+0x20/0x2c
  [   30.946253] [<90000000032dd224>] do_syscall+0x7c/0x94
  [   30.946343] [<9000000002541c5c>] handle_syscall+0xbc/0x158
  [   30.946492]
  [   30.946549] Code: 0015030e  5c0009c0  5001d000 <28c00304> 02c00484  29c00304  00150009  2a42d2e4  0280200d
  [   30.946793]
  [   30.946971] ---[ end trace 0000000000000000 ]---
  [   32.093225] Kernel panic - not syncing: Fatal exception in interrupt
  [   32.093526] Kernel relocated by 0x2320000
  [   32.093630]  .text @ 0x9000000002520000
  [   32.093725]  .data @ 0x9000000003400000
  [   32.093792]  .bss  @ 0x9000000004413200
  [   34.971998] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

This is because we signed-extend function return values. When subprog
mode is enabled, we have:

  cls_redirect()
    -> get_global_metrics() returns pcpu ptr 0xfffffefffc00b480

The pointer returned is later signed-extended to 0xfffffffffc00b480 at
`BPF_JMP | BPF_EXIT`. During BPF prog run, this triggers unhandled page
fault and a kernel panic.

Drop the unnecessary signed-extension on return values like other
architectures do.

With this change, we have:

  # ./test_progs -t cls_redirect
  Can't find bpf_testmod.ko kernel module: -2
  WARNING! Selftests relying on bpf_testmod.ko will be skipped.
  #51/1    cls_redirect/cls_redirect_inlined:OK
  #51/2    cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK
  #51/3    cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK
  #51/4    cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK
  #51/5    cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK
  #51/6    cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK
  #51/7    cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK
  #51/8    cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK
  #51/9    cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK
  #51/10   cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK
  #51/11   cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK
  #51/12   cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK
  #51/13   cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK
  #51/14   cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK
  #51/15   cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK
  #51/16   cls_redirect/cls_redirect_subprogs:OK
  #51/17   cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK
  #51/18   cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK
  #51/19   cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK
  #51/20   cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK
  #51/21   cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK
  #51/22   cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK
  #51/23   cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK
  #51/24   cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK
  #51/25   cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK
  #51/26   cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK
  #51/27   cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK
  #51/28   cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK
  #51/29   cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK
  #51/30   cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK
  #51/31   cls_redirect/cls_redirect_dynptr:OK
  #51/32   cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK
  #51/33   cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK
  #51/34   cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK
  #51/35   cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK
  #51/36   cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK
  #51/37   cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK
  #51/38   cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK
  #51/39   cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK
  #51/40   cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK
  #51/41   cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK
  #51/42   cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK
  #51/43   cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK
  #51/44   cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK
  #51/45   cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK
  #51      cls_redirect:OK
  Summary: 1/45 PASSED, 0 SKIPPED, 0 FAILED

Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support")
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/loongarch/net/bpf_jit.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/loongarch/net/bpf_jit.c b/arch/loongarch/net/bpf_jit.c
index 20ad5f3a9bf94..40ed49d9adff5 100644
--- a/arch/loongarch/net/bpf_jit.c
+++ b/arch/loongarch/net/bpf_jit.c
@@ -796,8 +796,6 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, bool ext
 
 	/* function return */
 	case BPF_JMP | BPF_EXIT:
-		emit_sext_32(ctx, regmap[BPF_REG_0], true);
-
 		if (i == ctx->prog->len - 1)
 			break;
 
-- 
2.42.0

[PATCH 6.1 143/194] ring-buffer: Force absolute timestamp on discard of event

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steven Rostedt (Google) <rostedt@goodmis.org>

[ Upstream commit b2dd797543cfa6580eac8408dd67fa02164d9e56 ]

There's a race where if an event is discarded from the ring buffer and an
interrupt were to happen at that time and insert an event, the time stamp
is still used from the discarded event as an offset. This can screw up the
timings.

If the event is going to be discarded, set the "before_stamp" to zero.
When a new event comes in, it compares the "before_stamp" with the
"write_stamp" and if they are not equal, it will insert an absolute
timestamp. This will prevent the timings from getting out of sync due to
the discarded event.

Link: https://lore.kernel.org/linux-trace-kernel/20231206100244.5130f9b3@gandalf.local.home

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 6f6be606e763f ("ring-buffer: Force before_stamp and write_stamp to be different on discard")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/ring_buffer.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index f3c4bb54a0485..c02a4cb879913 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -3025,22 +3025,19 @@ rb_try_to_discard(struct ring_buffer_per_cpu *cpu_buffer,
 			local_read(&bpage->write) & ~RB_WRITE_MASK;
 		unsigned long event_length = rb_event_length(event);
 
+		/*
+		 * For the before_stamp to be different than the write_stamp
+		 * to make sure that the next event adds an absolute
+		 * value and does not rely on the saved write stamp, which
+		 * is now going to be bogus.
+		 */
+		rb_time_set(&cpu_buffer->before_stamp, 0);
+
 		/* Something came in, can't discard */
 		if (!rb_time_cmpxchg(&cpu_buffer->write_stamp,
 				       write_stamp, write_stamp - delta))
 			return 0;
 
-		/*
-		 * It's possible that the event time delta is zero
-		 * (has the same time stamp as the previous event)
-		 * in which case write_stamp and before_stamp could
-		 * be the same. In such a case, force before_stamp
-		 * to be different than write_stamp. It doesn't
-		 * matter what it is, as long as its different.
-		 */
-		if (!delta)
-			rb_time_set(&cpu_buffer->before_stamp, 0);
-
 		/*
 		 * If an event were to come in now, it would see that the
 		 * write_stamp and the before_stamp are different, and assume
-- 
2.42.0

[PATCH 6.1 144/194] tracing: Set actual size after ring buffer resize

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zheng Yejian <zhengyejian1@huawei.com>

[ Upstream commit 6d98a0f2ac3c021d21be66fa34e992137cd25bcb ]

Currently we can resize trace ringbuffer by writing a value into file
'buffer_size_kb', then by reading the file, we get the value that is
usually what we wrote. However, this value may be not actual size of
trace ring buffer because of the round up when doing resize in kernel,
and the actual size would be more useful.

Link: https://lore.kernel.org/linux-trace-kernel/20230705002705.576633-1-zhengyejian1@huawei.com

Cc: <mhiramat@kernel.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: d78ab792705c ("tracing: Stop current tracer when resizing buffer")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/trace.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 2e1c6fd0d3f17..048728807f265 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -6215,6 +6215,15 @@ static void set_buffer_entries(struct array_buffer *buf, unsigned long val)
 		per_cpu_ptr(buf->data, cpu)->entries = val;
 }
 
+static void update_buffer_entries(struct array_buffer *buf, int cpu)
+{
+	if (cpu == RING_BUFFER_ALL_CPUS) {
+		set_buffer_entries(buf, ring_buffer_size(buf->buffer, 0));
+	} else {
+		per_cpu_ptr(buf->data, cpu)->entries = ring_buffer_size(buf->buffer, cpu);
+	}
+}
+
 #ifdef CONFIG_TRACER_MAX_TRACE
 /* resize @tr's buffer to the size of @size_tr's entries */
 static int resize_buffer_duplicate_size(struct array_buffer *trace_buf,
@@ -6292,18 +6301,12 @@ static int __tracing_resize_ring_buffer(struct trace_array *tr,
 		return ret;
 	}
 
-	if (cpu == RING_BUFFER_ALL_CPUS)
-		set_buffer_entries(&tr->max_buffer, size);
-	else
-		per_cpu_ptr(tr->max_buffer.data, cpu)->entries = size;
+	update_buffer_entries(&tr->max_buffer, cpu);
 
  out:
 #endif /* CONFIG_TRACER_MAX_TRACE */
 
-	if (cpu == RING_BUFFER_ALL_CPUS)
-		set_buffer_entries(&tr->array_buffer, size);
-	else
-		per_cpu_ptr(tr->array_buffer.data, cpu)->entries = size;
+	update_buffer_entries(&tr->array_buffer, cpu);
 
 	return ret;
 }
-- 
2.42.0

[PATCH 6.1 145/194] tracing: Stop current tracer when resizing buffer

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steven Rostedt (Google) <rostedt@goodmis.org>

[ Upstream commit d78ab792705c7be1b91243b2544d1a79406a2ad7 ]

When the ring buffer is being resized, it can cause side effects to the
running tracer. For instance, there's a race with irqsoff tracer that
swaps individual per cpu buffers between the main buffer and the snapshot
buffer. The resize operation modifies the main buffer and then the
snapshot buffer. If a swap happens in between those two operations it will
break the tracer.

Simply stop the running tracer before resizing the buffers and enable it
again when finished.

Link: https://lkml.kernel.org/r/20231205220010.748996423@goodmis.org

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 3928a8a2d9808 ("ftrace: make work with new ring buffer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/trace.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 048728807f265..d2db4d6f0f2fd 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -6268,9 +6268,12 @@ static int __tracing_resize_ring_buffer(struct trace_array *tr,
 	if (!tr->array_buffer.buffer)
 		return 0;
 
+	/* Do not allow tracing while resizng ring buffer */
+	tracing_stop_tr(tr);
+
 	ret = ring_buffer_resize(tr->array_buffer.buffer, size, cpu);
 	if (ret < 0)
-		return ret;
+		goto out_start;
 
 #ifdef CONFIG_TRACER_MAX_TRACE
 	if (!tr->current_trace->use_max_tr)
@@ -6298,7 +6301,7 @@ static int __tracing_resize_ring_buffer(struct trace_array *tr,
 			WARN_ON(1);
 			tracing_disabled = 1;
 		}
-		return ret;
+		goto out_start;
 	}
 
 	update_buffer_entries(&tr->max_buffer, cpu);
@@ -6307,7 +6310,8 @@ static int __tracing_resize_ring_buffer(struct trace_array *tr,
 #endif /* CONFIG_TRACER_MAX_TRACE */
 
 	update_buffer_entries(&tr->array_buffer, cpu);
-
+ out_start:
+	tracing_start_tr(tr);
 	return ret;
 }
 
-- 
2.42.0

[PATCH 6.1 146/194] parisc: Reduce size of the bug_table on 64-bit kernel by half

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Helge Deller <deller@gmx.de>

[ Upstream commit 43266838515d30dc0c45d5c7e6e7edacee6cce92 ]

Enable GENERIC_BUG_RELATIVE_POINTERS which will store 32-bit relative
offsets to the bug address and the source file name instead of 64-bit
absolute addresses. This effectively reduces the size of the
bug_table[] array by half on 64-bit kernels.

Signed-off-by: Helge Deller <deller@gmx.de>
Stable-dep-of: 487635756198 ("parisc: Fix asm operand number out of range build error in bug table")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/parisc/Kconfig           |  7 +++++--
 arch/parisc/include/asm/bug.h | 34 +++++++++++++++++-----------------
 2 files changed, 22 insertions(+), 19 deletions(-)

diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 67c26e81e2150..345d5e021484c 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -105,9 +105,12 @@ config ARCH_HAS_ILOG2_U64
 	default n
 
 config GENERIC_BUG
-	bool
-	default y
+	def_bool y
 	depends on BUG
+	select GENERIC_BUG_RELATIVE_POINTERS if 64BIT
+
+config GENERIC_BUG_RELATIVE_POINTERS
+	bool
 
 config GENERIC_HWEIGHT
 	bool
diff --git a/arch/parisc/include/asm/bug.h b/arch/parisc/include/asm/bug.h
index b9cad0bb4461b..1641ff9a8b83e 100644
--- a/arch/parisc/include/asm/bug.h
+++ b/arch/parisc/include/asm/bug.h
@@ -17,26 +17,27 @@
 #define	PARISC_BUG_BREAK_ASM	"break 0x1f, 0x1fff"
 #define	PARISC_BUG_BREAK_INSN	0x03ffe01f  /* PARISC_BUG_BREAK_ASM */
 
-#if defined(CONFIG_64BIT)
-#define ASM_WORD_INSN		".dword\t"
+#ifdef CONFIG_GENERIC_BUG_RELATIVE_POINTERS
+# define __BUG_REL(val) ".word " __stringify(val) " - ."
 #else
-#define ASM_WORD_INSN		".word\t"
+# define __BUG_REL(val) ".word " __stringify(val)
 #endif
 
+
 #ifdef CONFIG_DEBUG_BUGVERBOSE
 #define BUG()								\
 	do {								\
 		asm volatile("\n"					\
 			     "1:\t" PARISC_BUG_BREAK_ASM "\n"		\
 			     "\t.pushsection __bug_table,\"a\"\n"	\
-			     "\t.align %4\n"				\
-			     "2:\t" ASM_WORD_INSN "1b, %c0\n"		\
+			     "\t.align 4\n"				\
+			     "2:\t" __BUG_REL(1b) "\n"			\
+			     "\t" __BUG_REL(%c0)  "\n"			\
 			     "\t.short %1, %2\n"			\
-			     "\t.blockz %3-2*%4-2*2\n"			\
+			     "\t.blockz %3-2*4-2*2\n"			\
 			     "\t.popsection"				\
 			     : : "i" (__FILE__), "i" (__LINE__),	\
-			     "i" (0), "i" (sizeof(struct bug_entry)),	\
-			     "i" (sizeof(long)) );			\
+			     "i" (0), "i" (sizeof(struct bug_entry)) );	\
 		unreachable();						\
 	} while(0)
 
@@ -54,15 +55,15 @@
 		asm volatile("\n"					\
 			     "1:\t" PARISC_BUG_BREAK_ASM "\n"		\
 			     "\t.pushsection __bug_table,\"a\"\n"	\
-			     "\t.align %4\n"				\
-			     "2:\t" ASM_WORD_INSN "1b, %c0\n"		\
+			     "\t.align 4\n"				\
+			     "2:\t" __BUG_REL(1b) "\n"			\
+			     "\t" __BUG_REL(%c0)  "\n"			\
 			     "\t.short %1, %2\n"			\
-			     "\t.blockz %3-2*%4-2*2\n"			\
+			     "\t.blockz %3-2*4-2*2\n"			\
 			     "\t.popsection"				\
 			     : : "i" (__FILE__), "i" (__LINE__),	\
 			     "i" (BUGFLAG_WARNING|(flags)),		\
-			     "i" (sizeof(struct bug_entry)),		\
-			     "i" (sizeof(long)) );			\
+			     "i" (sizeof(struct bug_entry)) );		\
 	} while(0)
 #else
 #define __WARN_FLAGS(flags)						\
@@ -71,13 +72,12 @@
 			     "1:\t" PARISC_BUG_BREAK_ASM "\n"		\
 			     "\t.pushsection __bug_table,\"a\"\n"	\
 			     "\t.align %2\n"				\
-			     "2:\t" ASM_WORD_INSN "1b\n"		\
+			     "2:\t" __BUG_REL(1b) "\n"			\
 			     "\t.short %0\n"				\
-			     "\t.blockz %1-%2-2\n"			\
+			     "\t.blockz %1-4-2\n"			\
 			     "\t.popsection"				\
 			     : : "i" (BUGFLAG_WARNING|(flags)),		\
-			     "i" (sizeof(struct bug_entry)),		\
-			     "i" (sizeof(long)) );			\
+			     "i" (sizeof(struct bug_entry)) );		\
 	} while(0)
 #endif
 
-- 
2.42.0

[PATCH 6.1 147/194] parisc: Fix asm operand number out of range build error in bug table

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Helge Deller <deller@gmx.de>

[ Upstream commit 487635756198cad563feb47539c6a37ea57f1dae ]

Build is broken if CONFIG_DEBUG_BUGVERBOSE=n.
Fix it be using the correct asm operand number.

Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Fixes: fe76a1349f23 ("parisc: Use natural CPU alignment for bug_table")
Cc: stable@vger.kernel.org   # v6.0+
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/parisc/include/asm/bug.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/parisc/include/asm/bug.h b/arch/parisc/include/asm/bug.h
index 1641ff9a8b83e..833555f74ffa7 100644
--- a/arch/parisc/include/asm/bug.h
+++ b/arch/parisc/include/asm/bug.h
@@ -71,7 +71,7 @@
 		asm volatile("\n"					\
 			     "1:\t" PARISC_BUG_BREAK_ASM "\n"		\
 			     "\t.pushsection __bug_table,\"a\"\n"	\
-			     "\t.align %2\n"				\
+			     "\t.align 4\n"				\
 			     "2:\t" __BUG_REL(1b) "\n"			\
 			     "\t.short %0\n"				\
 			     "\t.blockz %1-4-2\n"			\
-- 
2.42.0

[PATCH 6.1 148/194] arm64: dts: mediatek: add missing space before {

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit a9c740c57f977deb41bc53c02d0dae3d0e2f191a ]

Add missing whitespace between node name/label and opening {.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230705150006.293690-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Stable-dep-of: 8980c30141d3 ("arm64: dts: mt8183: kukui: Fix underscores in node names")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/mediatek/mt8183-evb.dts   | 48 +++++++++----------
 .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 12 ++---
 .../boot/dts/mediatek/mt8183-pumpkin.dts      | 12 ++---
 3 files changed, 36 insertions(+), 36 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
index 705af355a64e0..2ca0da51efaa0 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
@@ -139,8 +139,8 @@ &mmc1 {
 };
 
 &pio {
-	i2c_pins_0: i2c0{
-		pins_i2c{
+	i2c_pins_0: i2c0 {
+		pins_i2c {
 			pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
 				 <PINMUX_GPIO83__FUNC_SCL0>;
 			mediatek,pull-up-adv = <3>;
@@ -148,8 +148,8 @@ pins_i2c{
 		};
 	};
 
-	i2c_pins_1: i2c1{
-		pins_i2c{
+	i2c_pins_1: i2c1 {
+		pins_i2c {
 			pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
 				 <PINMUX_GPIO84__FUNC_SCL1>;
 			mediatek,pull-up-adv = <3>;
@@ -157,8 +157,8 @@ pins_i2c{
 		};
 	};
 
-	i2c_pins_2: i2c2{
-		pins_i2c{
+	i2c_pins_2: i2c2 {
+		pins_i2c {
 			pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
 				 <PINMUX_GPIO104__FUNC_SDA2>;
 			mediatek,pull-up-adv = <3>;
@@ -166,8 +166,8 @@ pins_i2c{
 		};
 	};
 
-	i2c_pins_3: i2c3{
-		pins_i2c{
+	i2c_pins_3: i2c3 {
+		pins_i2c {
 			pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
 				 <PINMUX_GPIO51__FUNC_SDA3>;
 			mediatek,pull-up-adv = <3>;
@@ -175,8 +175,8 @@ pins_i2c{
 		};
 	};
 
-	i2c_pins_4: i2c4{
-		pins_i2c{
+	i2c_pins_4: i2c4 {
+		pins_i2c {
 			pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
 				 <PINMUX_GPIO106__FUNC_SDA4>;
 			mediatek,pull-up-adv = <3>;
@@ -184,8 +184,8 @@ pins_i2c{
 		};
 	};
 
-	i2c_pins_5: i2c5{
-		pins_i2c{
+	i2c_pins_5: i2c5 {
+		pins_i2c {
 			pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
 				 <PINMUX_GPIO49__FUNC_SDA5>;
 			mediatek,pull-up-adv = <3>;
@@ -193,8 +193,8 @@ pins_i2c{
 		};
 	};
 
-	spi_pins_0: spi0{
-		pins_spi{
+	spi_pins_0: spi0 {
+		pins_spi {
 			pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>,
 				 <PINMUX_GPIO86__FUNC_SPI0_CSB>,
 				 <PINMUX_GPIO87__FUNC_SPI0_MO>,
@@ -308,8 +308,8 @@ pins_clk {
 		};
 	};
 
-	spi_pins_1: spi1{
-		pins_spi{
+	spi_pins_1: spi1 {
+		pins_spi {
 			pinmux = <PINMUX_GPIO161__FUNC_SPI1_A_MI>,
 				 <PINMUX_GPIO162__FUNC_SPI1_A_CSB>,
 				 <PINMUX_GPIO163__FUNC_SPI1_A_MO>,
@@ -318,8 +318,8 @@ pins_spi{
 		};
 	};
 
-	spi_pins_2: spi2{
-		pins_spi{
+	spi_pins_2: spi2 {
+		pins_spi {
 			pinmux = <PINMUX_GPIO0__FUNC_SPI2_CSB>,
 				 <PINMUX_GPIO1__FUNC_SPI2_MO>,
 				 <PINMUX_GPIO2__FUNC_SPI2_CLK>,
@@ -328,8 +328,8 @@ pins_spi{
 		};
 	};
 
-	spi_pins_3: spi3{
-		pins_spi{
+	spi_pins_3: spi3 {
+		pins_spi {
 			pinmux = <PINMUX_GPIO21__FUNC_SPI3_MI>,
 				 <PINMUX_GPIO22__FUNC_SPI3_CSB>,
 				 <PINMUX_GPIO23__FUNC_SPI3_MO>,
@@ -338,8 +338,8 @@ pins_spi{
 		};
 	};
 
-	spi_pins_4: spi4{
-		pins_spi{
+	spi_pins_4: spi4 {
+		pins_spi {
 			pinmux = <PINMUX_GPIO17__FUNC_SPI4_MI>,
 				 <PINMUX_GPIO18__FUNC_SPI4_CSB>,
 				 <PINMUX_GPIO19__FUNC_SPI4_MO>,
@@ -348,8 +348,8 @@ pins_spi{
 		};
 	};
 
-	spi_pins_5: spi5{
-		pins_spi{
+	spi_pins_5: spi5 {
+		pins_spi {
 			pinmux = <PINMUX_GPIO13__FUNC_SPI5_MI>,
 				 <PINMUX_GPIO14__FUNC_SPI5_CSB>,
 				 <PINMUX_GPIO15__FUNC_SPI5_MO>,
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index f8bea83d89d6d..b813ce665e5dd 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -683,7 +683,7 @@ pins_scp_uart {
 	};
 
 	spi0_pins: spi0 {
-		pins_spi{
+		pins_spi {
 			pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>,
 				 <PINMUX_GPIO86__FUNC_GPIO86>,
 				 <PINMUX_GPIO87__FUNC_SPI0_MO>,
@@ -693,7 +693,7 @@ pins_spi{
 	};
 
 	spi1_pins: spi1 {
-		pins_spi{
+		pins_spi {
 			pinmux = <PINMUX_GPIO161__FUNC_SPI1_A_MI>,
 				 <PINMUX_GPIO162__FUNC_SPI1_A_CSB>,
 				 <PINMUX_GPIO163__FUNC_SPI1_A_MO>,
@@ -703,7 +703,7 @@ pins_spi{
 	};
 
 	spi2_pins: spi2 {
-		pins_spi{
+		pins_spi {
 			pinmux = <PINMUX_GPIO0__FUNC_SPI2_CSB>,
 				 <PINMUX_GPIO1__FUNC_SPI2_MO>,
 				 <PINMUX_GPIO2__FUNC_SPI2_CLK>;
@@ -716,7 +716,7 @@ pins_spi_mi {
 	};
 
 	spi3_pins: spi3 {
-		pins_spi{
+		pins_spi {
 			pinmux = <PINMUX_GPIO21__FUNC_SPI3_MI>,
 				 <PINMUX_GPIO22__FUNC_SPI3_CSB>,
 				 <PINMUX_GPIO23__FUNC_SPI3_MO>,
@@ -726,7 +726,7 @@ pins_spi{
 	};
 
 	spi4_pins: spi4 {
-		pins_spi{
+		pins_spi {
 			pinmux = <PINMUX_GPIO17__FUNC_SPI4_MI>,
 				 <PINMUX_GPIO18__FUNC_SPI4_CSB>,
 				 <PINMUX_GPIO19__FUNC_SPI4_MO>,
@@ -736,7 +736,7 @@ pins_spi{
 	};
 
 	spi5_pins: spi5 {
-		pins_spi{
+		pins_spi {
 			pinmux = <PINMUX_GPIO13__FUNC_SPI5_MI>,
 				 <PINMUX_GPIO14__FUNC_SPI5_CSB>,
 				 <PINMUX_GPIO15__FUNC_SPI5_MO>,
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
index a1d01639df30a..dd8d39861d9ca 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
@@ -178,7 +178,7 @@ &mmc1 {
 
 &pio {
 	i2c_pins_0: i2c0 {
-		pins_i2c{
+		pins_i2c {
 			pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
 				 <PINMUX_GPIO83__FUNC_SCL0>;
 			mediatek,pull-up-adv = <3>;
@@ -187,7 +187,7 @@ pins_i2c{
 	};
 
 	i2c_pins_1: i2c1 {
-		pins_i2c{
+		pins_i2c {
 			pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
 				 <PINMUX_GPIO84__FUNC_SCL1>;
 			mediatek,pull-up-adv = <3>;
@@ -196,7 +196,7 @@ pins_i2c{
 	};
 
 	i2c_pins_2: i2c2 {
-		pins_i2c{
+		pins_i2c {
 			pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
 				 <PINMUX_GPIO104__FUNC_SDA2>;
 			mediatek,pull-up-adv = <3>;
@@ -205,7 +205,7 @@ pins_i2c{
 	};
 
 	i2c_pins_3: i2c3 {
-		pins_i2c{
+		pins_i2c {
 			pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
 				 <PINMUX_GPIO51__FUNC_SDA3>;
 			mediatek,pull-up-adv = <3>;
@@ -214,7 +214,7 @@ pins_i2c{
 	};
 
 	i2c_pins_4: i2c4 {
-		pins_i2c{
+		pins_i2c {
 			pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
 				 <PINMUX_GPIO106__FUNC_SDA4>;
 			mediatek,pull-up-adv = <3>;
@@ -223,7 +223,7 @@ pins_i2c{
 	};
 
 	i2c_pins_5: i2c5 {
-		pins_i2c{
+		pins_i2c {
 			pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
 				 <PINMUX_GPIO49__FUNC_SDA5>;
 			mediatek,pull-up-adv = <3>;
-- 
2.42.0

[PATCH 6.1 149/194] arm64: dts: mt8183: kukui: Fix underscores in node names

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hsin-Yi Wang <hsinyi@chromium.org>

[ Upstream commit 8980c30141d3986beab815d85762b9c67196ed72 ]

Replace underscores with hyphens in pinctrl node names both for consistency
and to adhere to the bindings.

Cc: stable@vger.kernel.org
Fixes: cd894e274b74 ("arm64: dts: mt8183: Add krane-sku176 board")
Fixes: 1652dbf7363a ("arm64: dts: mt8183: add scp node")
Fixes: 27eaf34df364 ("arm64: dts: mt8183: config dsi node")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231026191343.3345279-2-hsinyi@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../dts/mediatek/mt8183-kukui-jacuzzi.dtsi    |  6 +-
 .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 94 +++++++++----------
 2 files changed, 50 insertions(+), 50 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
index 22b806e75401b..dccf367c7ec6c 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -439,20 +439,20 @@ pins2 {
 	};
 
 	touchscreen_pins: touchscreen-pins {
-		touch_int_odl {
+		touch-int-odl {
 			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
 			input-enable;
 			bias-pull-up;
 		};
 
-		touch_rst_l {
+		touch-rst-l {
 			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
 			output-high;
 		};
 	};
 
 	trackpad_pins: trackpad-pins {
-		trackpad_int {
+		trackpad-int {
 			pinmux = <PINMUX_GPIO7__FUNC_GPIO7>;
 			input-enable;
 			bias-disable; /* pulled externally */
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index b813ce665e5dd..a428a581c93a8 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -423,7 +423,7 @@ &mt6358_vsim2_reg {
 
 &pio {
 	aud_pins_default: audiopins {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO97__FUNC_I2S2_MCK>,
 				<PINMUX_GPIO98__FUNC_I2S2_BCK>,
 				<PINMUX_GPIO101__FUNC_I2S2_LRCK>,
@@ -445,7 +445,7 @@ pins_bus {
 	};
 
 	aud_pins_tdm_out_on: audiotdmouton {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO169__FUNC_TDM_BCK_2ND>,
 				<PINMUX_GPIO170__FUNC_TDM_LRCK_2ND>,
 				<PINMUX_GPIO171__FUNC_TDM_DATA0_2ND>,
@@ -457,7 +457,7 @@ pins_bus {
 	};
 
 	aud_pins_tdm_out_off: audiotdmoutoff {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO169__FUNC_GPIO169>,
 				<PINMUX_GPIO170__FUNC_GPIO170>,
 				<PINMUX_GPIO171__FUNC_GPIO171>,
@@ -471,13 +471,13 @@ pins_bus {
 	};
 
 	bt_pins: bt-pins {
-		pins_bt_en {
+		pins-bt-en {
 			pinmux = <PINMUX_GPIO120__FUNC_GPIO120>;
 			output-low;
 		};
 	};
 
-	ec_ap_int_odl: ec_ap_int_odl {
+	ec_ap_int_odl: ec-ap-int-odl {
 		pins1 {
 			pinmux = <PINMUX_GPIO151__FUNC_GPIO151>;
 			input-enable;
@@ -485,7 +485,7 @@ pins1 {
 		};
 	};
 
-	h1_int_od_l: h1_int_od_l {
+	h1_int_od_l: h1-int-od-l {
 		pins1 {
 			pinmux = <PINMUX_GPIO153__FUNC_GPIO153>;
 			input-enable;
@@ -493,7 +493,7 @@ pins1 {
 	};
 
 	i2c0_pins: i2c0 {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
 				 <PINMUX_GPIO83__FUNC_SCL0>;
 			mediatek,pull-up-adv = <3>;
@@ -502,7 +502,7 @@ pins_bus {
 	};
 
 	i2c1_pins: i2c1 {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
 				 <PINMUX_GPIO84__FUNC_SCL1>;
 			mediatek,pull-up-adv = <3>;
@@ -511,7 +511,7 @@ pins_bus {
 	};
 
 	i2c2_pins: i2c2 {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
 				 <PINMUX_GPIO104__FUNC_SDA2>;
 			bias-disable;
@@ -520,7 +520,7 @@ pins_bus {
 	};
 
 	i2c3_pins: i2c3 {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
 				 <PINMUX_GPIO51__FUNC_SDA3>;
 			mediatek,pull-up-adv = <3>;
@@ -529,7 +529,7 @@ pins_bus {
 	};
 
 	i2c4_pins: i2c4 {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
 				 <PINMUX_GPIO106__FUNC_SDA4>;
 			bias-disable;
@@ -538,7 +538,7 @@ pins_bus {
 	};
 
 	i2c5_pins: i2c5 {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
 				 <PINMUX_GPIO49__FUNC_SDA5>;
 			mediatek,pull-up-adv = <3>;
@@ -547,7 +547,7 @@ pins_bus {
 	};
 
 	i2c6_pins: i2c6 {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO11__FUNC_SCL6>,
 				 <PINMUX_GPIO12__FUNC_SDA6>;
 			bias-disable;
@@ -555,7 +555,7 @@ pins_bus {
 	};
 
 	mmc0_pins_default: mmc0-pins-default {
-		pins_cmd_dat {
+		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
 				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
 				 <PINMUX_GPIO125__FUNC_MSDC0_DAT2>,
@@ -570,13 +570,13 @@ pins_cmd_dat {
 			mediatek,pull-up-adv = <01>;
 		};
 
-		pins_clk {
+		pins-clk {
 			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
 			drive-strength = <MTK_DRIVE_14mA>;
 			mediatek,pull-down-adv = <10>;
 		};
 
-		pins_rst {
+		pins-rst {
 			pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>;
 			drive-strength = <MTK_DRIVE_14mA>;
 			mediatek,pull-down-adv = <01>;
@@ -584,7 +584,7 @@ pins_rst {
 	};
 
 	mmc0_pins_uhs: mmc0-pins-uhs {
-		pins_cmd_dat {
+		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
 				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
 				 <PINMUX_GPIO125__FUNC_MSDC0_DAT2>,
@@ -599,19 +599,19 @@ pins_cmd_dat {
 			mediatek,pull-up-adv = <01>;
 		};
 
-		pins_clk {
+		pins-clk {
 			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
 			drive-strength = <MTK_DRIVE_14mA>;
 			mediatek,pull-down-adv = <10>;
 		};
 
-		pins_ds {
+		pins-ds {
 			pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>;
 			drive-strength = <MTK_DRIVE_14mA>;
 			mediatek,pull-down-adv = <10>;
 		};
 
-		pins_rst {
+		pins-rst {
 			pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>;
 			drive-strength = <MTK_DRIVE_14mA>;
 			mediatek,pull-up-adv = <01>;
@@ -619,7 +619,7 @@ pins_rst {
 	};
 
 	mmc1_pins_default: mmc1-pins-default {
-		pins_cmd_dat {
+		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
 				 <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
 				 <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
@@ -629,7 +629,7 @@ pins_cmd_dat {
 			mediatek,pull-up-adv = <10>;
 		};
 
-		pins_clk {
+		pins-clk {
 			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
 			input-enable;
 			mediatek,pull-down-adv = <10>;
@@ -637,7 +637,7 @@ pins_clk {
 	};
 
 	mmc1_pins_uhs: mmc1-pins-uhs {
-		pins_cmd_dat {
+		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
 				 <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
 				 <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
@@ -648,7 +648,7 @@ pins_cmd_dat {
 			mediatek,pull-up-adv = <10>;
 		};
 
-		pins_clk {
+		pins-clk {
 			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
 			drive-strength = <MTK_DRIVE_8mA>;
 			mediatek,pull-down-adv = <10>;
@@ -656,15 +656,15 @@ pins_clk {
 		};
 	};
 
-	panel_pins_default: panel_pins_default {
-		panel_reset {
+	panel_pins_default: panel-pins-default {
+		panel-reset {
 			pinmux = <PINMUX_GPIO45__FUNC_GPIO45>;
 			output-low;
 			bias-pull-up;
 		};
 	};
 
-	pwm0_pin_default: pwm0_pin_default {
+	pwm0_pin_default: pwm0-pin-default {
 		pins1 {
 			pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
 			output-high;
@@ -676,14 +676,14 @@ pins2 {
 	};
 
 	scp_pins: scp {
-		pins_scp_uart {
+		pins-scp-uart {
 			pinmux = <PINMUX_GPIO110__FUNC_TP_URXD1_AO>,
 				 <PINMUX_GPIO112__FUNC_TP_UTXD1_AO>;
 		};
 	};
 
 	spi0_pins: spi0 {
-		pins_spi {
+		pins-spi {
 			pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>,
 				 <PINMUX_GPIO86__FUNC_GPIO86>,
 				 <PINMUX_GPIO87__FUNC_SPI0_MO>,
@@ -693,7 +693,7 @@ pins_spi {
 	};
 
 	spi1_pins: spi1 {
-		pins_spi {
+		pins-spi {
 			pinmux = <PINMUX_GPIO161__FUNC_SPI1_A_MI>,
 				 <PINMUX_GPIO162__FUNC_SPI1_A_CSB>,
 				 <PINMUX_GPIO163__FUNC_SPI1_A_MO>,
@@ -703,20 +703,20 @@ pins_spi {
 	};
 
 	spi2_pins: spi2 {
-		pins_spi {
+		pins-spi {
 			pinmux = <PINMUX_GPIO0__FUNC_SPI2_CSB>,
 				 <PINMUX_GPIO1__FUNC_SPI2_MO>,
 				 <PINMUX_GPIO2__FUNC_SPI2_CLK>;
 			bias-disable;
 		};
-		pins_spi_mi {
+		pins-spi-mi {
 			pinmux = <PINMUX_GPIO94__FUNC_SPI2_MI>;
 			mediatek,pull-down-adv = <00>;
 		};
 	};
 
 	spi3_pins: spi3 {
-		pins_spi {
+		pins-spi {
 			pinmux = <PINMUX_GPIO21__FUNC_SPI3_MI>,
 				 <PINMUX_GPIO22__FUNC_SPI3_CSB>,
 				 <PINMUX_GPIO23__FUNC_SPI3_MO>,
@@ -726,7 +726,7 @@ pins_spi {
 	};
 
 	spi4_pins: spi4 {
-		pins_spi {
+		pins-spi {
 			pinmux = <PINMUX_GPIO17__FUNC_SPI4_MI>,
 				 <PINMUX_GPIO18__FUNC_SPI4_CSB>,
 				 <PINMUX_GPIO19__FUNC_SPI4_MO>,
@@ -736,7 +736,7 @@ pins_spi {
 	};
 
 	spi5_pins: spi5 {
-		pins_spi {
+		pins-spi {
 			pinmux = <PINMUX_GPIO13__FUNC_SPI5_MI>,
 				 <PINMUX_GPIO14__FUNC_SPI5_CSB>,
 				 <PINMUX_GPIO15__FUNC_SPI5_MO>,
@@ -746,63 +746,63 @@ pins_spi {
 	};
 
 	uart0_pins_default: uart0-pins-default {
-		pins_rx {
+		pins-rx {
 			pinmux = <PINMUX_GPIO95__FUNC_URXD0>;
 			input-enable;
 			bias-pull-up;
 		};
-		pins_tx {
+		pins-tx {
 			pinmux = <PINMUX_GPIO96__FUNC_UTXD0>;
 		};
 	};
 
 	uart1_pins_default: uart1-pins-default {
-		pins_rx {
+		pins-rx {
 			pinmux = <PINMUX_GPIO121__FUNC_URXD1>;
 			input-enable;
 			bias-pull-up;
 		};
-		pins_tx {
+		pins-tx {
 			pinmux = <PINMUX_GPIO115__FUNC_UTXD1>;
 		};
-		pins_rts {
+		pins-rts {
 			pinmux = <PINMUX_GPIO47__FUNC_URTS1>;
 			output-enable;
 		};
-		pins_cts {
+		pins-cts {
 			pinmux = <PINMUX_GPIO46__FUNC_UCTS1>;
 			input-enable;
 		};
 	};
 
 	uart1_pins_sleep: uart1-pins-sleep {
-		pins_rx {
+		pins-rx {
 			pinmux = <PINMUX_GPIO121__FUNC_GPIO121>;
 			input-enable;
 			bias-pull-up;
 		};
-		pins_tx {
+		pins-tx {
 			pinmux = <PINMUX_GPIO115__FUNC_UTXD1>;
 		};
-		pins_rts {
+		pins-rts {
 			pinmux = <PINMUX_GPIO47__FUNC_URTS1>;
 			output-enable;
 		};
-		pins_cts {
+		pins-cts {
 			pinmux = <PINMUX_GPIO46__FUNC_UCTS1>;
 			input-enable;
 		};
 	};
 
 	wifi_pins_pwrseq: wifi-pins-pwrseq {
-		pins_wifi_enable {
+		pins-wifi-enable {
 			pinmux = <PINMUX_GPIO119__FUNC_GPIO119>;
 			output-low;
 		};
 	};
 
 	wifi_pins_wakeup: wifi-pins-wakeup {
-		pins_wifi_wakeup {
+		pins-wifi-wakeup {
 			pinmux = <PINMUX_GPIO113__FUNC_GPIO113>;
 			input-enable;
 		};
-- 
2.42.0

[PATCH 6.1 150/194] perf: Fix perf_event_validate_size()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit 382c27f4ed28f803b1f1473ac2d8db0afc795a1b ]

Budimir noted that perf_event_validate_size() only checks the size of
the newly added event, even though the sizes of all existing events
can also change due to not all events having the same read_format.

When we attach the new event, perf_group_attach(), we do re-compute
the size for all events.

Fixes: a723968c0ed3 ("perf: Fix u16 overflows")
Reported-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/events/core.c | 61 +++++++++++++++++++++++++++-----------------
 1 file changed, 38 insertions(+), 23 deletions(-)

diff --git a/kernel/events/core.c b/kernel/events/core.c
index 8f2b9d8b9150e..0193243f65e5c 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -1812,31 +1812,34 @@ static inline void perf_event__state_init(struct perf_event *event)
 					      PERF_EVENT_STATE_INACTIVE;
 }
 
-static void __perf_event_read_size(struct perf_event *event, int nr_siblings)
+static int __perf_event_read_size(u64 read_format, int nr_siblings)
 {
 	int entry = sizeof(u64); /* value */
 	int size = 0;
 	int nr = 1;
 
-	if (event->attr.read_format & PERF_FORMAT_TOTAL_TIME_ENABLED)
+	if (read_format & PERF_FORMAT_TOTAL_TIME_ENABLED)
 		size += sizeof(u64);
 
-	if (event->attr.read_format & PERF_FORMAT_TOTAL_TIME_RUNNING)
+	if (read_format & PERF_FORMAT_TOTAL_TIME_RUNNING)
 		size += sizeof(u64);
 
-	if (event->attr.read_format & PERF_FORMAT_ID)
+	if (read_format & PERF_FORMAT_ID)
 		entry += sizeof(u64);
 
-	if (event->attr.read_format & PERF_FORMAT_LOST)
+	if (read_format & PERF_FORMAT_LOST)
 		entry += sizeof(u64);
 
-	if (event->attr.read_format & PERF_FORMAT_GROUP) {
+	if (read_format & PERF_FORMAT_GROUP) {
 		nr += nr_siblings;
 		size += sizeof(u64);
 	}
 
-	size += entry * nr;
-	event->read_size = size;
+	/*
+	 * Since perf_event_validate_size() limits this to 16k and inhibits
+	 * adding more siblings, this will never overflow.
+	 */
+	return size + nr * entry;
 }
 
 static void __perf_event_header_size(struct perf_event *event, u64 sample_type)
@@ -1886,8 +1889,9 @@ static void __perf_event_header_size(struct perf_event *event, u64 sample_type)
  */
 static void perf_event__header_size(struct perf_event *event)
 {
-	__perf_event_read_size(event,
-			       event->group_leader->nr_siblings);
+	event->read_size =
+		__perf_event_read_size(event->attr.read_format,
+				       event->group_leader->nr_siblings);
 	__perf_event_header_size(event, event->attr.sample_type);
 }
 
@@ -1918,24 +1922,35 @@ static void perf_event__id_header_size(struct perf_event *event)
 	event->id_header_size = size;
 }
 
+/*
+ * Check that adding an event to the group does not result in anybody
+ * overflowing the 64k event limit imposed by the output buffer.
+ *
+ * Specifically, check that the read_size for the event does not exceed 16k,
+ * read_size being the one term that grows with groups size. Since read_size
+ * depends on per-event read_format, also (re)check the existing events.
+ *
+ * This leaves 48k for the constant size fields and things like callchains,
+ * branch stacks and register sets.
+ */
 static bool perf_event_validate_size(struct perf_event *event)
 {
-	/*
-	 * The values computed here will be over-written when we actually
-	 * attach the event.
-	 */
-	__perf_event_read_size(event, event->group_leader->nr_siblings + 1);
-	__perf_event_header_size(event, event->attr.sample_type & ~PERF_SAMPLE_READ);
-	perf_event__id_header_size(event);
+	struct perf_event *sibling, *group_leader = event->group_leader;
 
-	/*
-	 * Sum the lot; should not exceed the 64k limit we have on records.
-	 * Conservative limit to allow for callchains and other variable fields.
-	 */
-	if (event->read_size + event->header_size +
-	    event->id_header_size + sizeof(struct perf_event_header) >= 16*1024)
+	if (__perf_event_read_size(event->attr.read_format,
+				   group_leader->nr_siblings + 1) > 16*1024)
 		return false;
 
+	if (__perf_event_read_size(group_leader->attr.read_format,
+				   group_leader->nr_siblings + 1) > 16*1024)
+		return false;
+
+	for_each_sibling_event(sibling, group_leader) {
+		if (__perf_event_read_size(sibling->attr.read_format,
+					   group_leader->nr_siblings + 1) > 16*1024)
+			return false;
+	}
+
 	return true;
 }
 
-- 
2.42.0

[PATCH 6.1 151/194] x86/sev: Fix kernel crash due to late update to read-only ghcb_version

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ashwin Dayanand Kamat <ashwin.kamat@broadcom.com>

[ Upstream commit 27d25348d42161837be08fc63b04a2559d2e781c ]

A write-access violation page fault kernel crash was observed while running
cpuhotplug LTP testcases on SEV-ES enabled systems. The crash was
observed during hotplug, after the CPU was offlined and the process
was migrated to different CPU. setup_ghcb() is called again which
tries to update ghcb_version in sev_es_negotiate_protocol(). Ideally this
is a read_only variable which is initialised during booting.

Trying to write it results in a pagefault:

  BUG: unable to handle page fault for address: ffffffffba556e70
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0003) - permissions violation
  [ ...]
  Call Trace:
   <TASK>
   ? __die_body.cold+0x1a/0x1f
   ? __die+0x2a/0x35
   ? page_fault_oops+0x10c/0x270
   ? setup_ghcb+0x71/0x100
   ? __x86_return_thunk+0x5/0x6
   ? search_exception_tables+0x60/0x70
   ? __x86_return_thunk+0x5/0x6
   ? fixup_exception+0x27/0x320
   ? kernelmode_fixup_or_oops+0xa2/0x120
   ? __bad_area_nosemaphore+0x16a/0x1b0
   ? kernel_exc_vmm_communication+0x60/0xb0
   ? bad_area_nosemaphore+0x16/0x20
   ? do_kern_addr_fault+0x7a/0x90
   ? exc_page_fault+0xbd/0x160
   ? asm_exc_page_fault+0x27/0x30
   ? setup_ghcb+0x71/0x100
   ? setup_ghcb+0xe/0x100
   cpu_init_exception_handling+0x1b9/0x1f0

The fix is to call sev_es_negotiate_protocol() only in the BSP boot phase,
and it only needs to be done once in any case.

[ mingo: Refined the changelog. ]

Fixes: 95d33bfaa3e1 ("x86/sev: Register GHCB memory when SEV-SNP is active")
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Bo Gan <bo.gan@broadcom.com>
Signed-off-by: Bo Gan <bo.gan@broadcom.com>
Signed-off-by: Ashwin Dayanand Kamat <ashwin.kamat@broadcom.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/1701254429-18250-1-git-send-email-kashwindayan@vmware.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/sev.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kernel/sev.c b/arch/x86/kernel/sev.c
index 68b2a9d3dbc6b..c8dfb0fdde7f9 100644
--- a/arch/x86/kernel/sev.c
+++ b/arch/x86/kernel/sev.c
@@ -1279,10 +1279,6 @@ void setup_ghcb(void)
 	if (!cc_platform_has(CC_ATTR_GUEST_STATE_ENCRYPT))
 		return;
 
-	/* First make sure the hypervisor talks a supported protocol. */
-	if (!sev_es_negotiate_protocol())
-		sev_es_terminate(SEV_TERM_SET_GEN, GHCB_SEV_ES_GEN_REQ);
-
 	/*
 	 * Check whether the runtime #VC exception handler is active. It uses
 	 * the per-CPU GHCB page which is set up by sev_es_init_vc_handling().
@@ -1297,6 +1293,13 @@ void setup_ghcb(void)
 		return;
 	}
 
+	/*
+	 * Make sure the hypervisor talks a supported protocol.
+	 * This gets called only in the BSP boot phase.
+	 */
+	if (!sev_es_negotiate_protocol())
+		sev_es_terminate(SEV_TERM_SET_GEN, GHCB_SEV_ES_GEN_REQ);
+
 	/*
 	 * Clear the boot_ghcb. The first exception comes in before the bss
 	 * section is cleared.
-- 
2.42.0

[PATCH 6.1 152/194] gpiolib: sysfs: Fix error handling on failed export

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Boerge Struempfel <boerge.struempfel@gmail.com>

[ Upstream commit 95dd1e34ff5bbee93a28ff3947eceaf6de811b1a ]

If gpio_set_transitory() fails, we should free the GPIO again. Most
notably, the flag FLAG_REQUESTED has previously been set in
gpiod_request_commit(), and should be reset on failure.

To my knowledge, this does not affect any current users, since the
gpio_set_transitory() mainly returns 0 and -ENOTSUPP, which is converted
to 0. However the gpio_set_transitory() function calles the .set_config()
function of the corresponding GPIO chip and there are some GPIO drivers in
which some (unlikely) branches return other values like -EPROBE_DEFER,
and -EINVAL. In these cases, the above mentioned FLAG_REQUESTED would not
be reset, which results in the pin being blocked until the next reboot.

Fixes: e10f72bf4b3e ("gpio: gpiolib: Generalise state persistence beyond sleep")
Signed-off-by: Boerge Struempfel <boerge.struempfel@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpiolib-sysfs.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/gpio/gpiolib-sysfs.c b/drivers/gpio/gpiolib-sysfs.c
index cd27bf173dec8..a64648682c72c 100644
--- a/drivers/gpio/gpiolib-sysfs.c
+++ b/drivers/gpio/gpiolib-sysfs.c
@@ -463,14 +463,17 @@ static ssize_t export_store(struct class *class,
 		goto done;
 
 	status = gpiod_set_transitory(desc, false);
-	if (!status) {
-		status = gpiod_export(desc, true);
-		if (status < 0)
-			gpiod_free(desc);
-		else
-			set_bit(FLAG_SYSFS, &desc->flags);
+	if (status) {
+		gpiod_free(desc);
+		goto done;
 	}
 
+	status = gpiod_export(desc, true);
+	if (status < 0)
+		gpiod_free(desc);
+	else
+		set_bit(FLAG_SYSFS, &desc->flags);
+
 done:
 	if (status)
 		pr_debug("%s: status %d\n", __func__, status);
-- 
2.42.0

[PATCH 6.1 153/194] drm/amdgpu: fix memory overflow in the IB test

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tim Huang <Tim.Huang@amd.com>

[ Upstream commit 6b0b7789a7a5f3e69185449f891beea58e563f9b ]

Fix a memory overflow issue in the gfx IB test
for some ASICs. At least 20 bytes are needed for
the IB test packet.

v2: correct code indentation errors. (Christian)

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c | 2 +-
 drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c  | 4 ++--
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c  | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c
index 23e7e5126eae6..66a6f7a37ebcf 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c
@@ -397,7 +397,7 @@ static int gfx_v11_0_ring_test_ib(struct amdgpu_ring *ring, long timeout)
 		adev->wb.wb[index] = cpu_to_le32(0xCAFEDEAD);
 		cpu_ptr = &adev->wb.wb[index];
 
-		r = amdgpu_ib_get(adev, NULL, 16, AMDGPU_IB_POOL_DIRECT, &ib);
+		r = amdgpu_ib_get(adev, NULL, 20, AMDGPU_IB_POOL_DIRECT, &ib);
 		if (r) {
 			DRM_ERROR("amdgpu: failed to get ib (%ld).\n", r);
 			goto err1;
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
index 7f0b18b0d4c48..71ef25425c7f6 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
@@ -883,8 +883,8 @@ static int gfx_v8_0_ring_test_ib(struct amdgpu_ring *ring, long timeout)
 	gpu_addr = adev->wb.gpu_addr + (index * 4);
 	adev->wb.wb[index] = cpu_to_le32(0xCAFEDEAD);
 	memset(&ib, 0, sizeof(ib));
-	r = amdgpu_ib_get(adev, NULL, 16,
-					AMDGPU_IB_POOL_DIRECT, &ib);
+
+	r = amdgpu_ib_get(adev, NULL, 20, AMDGPU_IB_POOL_DIRECT, &ib);
 	if (r)
 		goto err1;
 
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index fe371022e5104..84ca601f7d5f3 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -1034,8 +1034,8 @@ static int gfx_v9_0_ring_test_ib(struct amdgpu_ring *ring, long timeout)
 	gpu_addr = adev->wb.gpu_addr + (index * 4);
 	adev->wb.wb[index] = cpu_to_le32(0xCAFEDEAD);
 	memset(&ib, 0, sizeof(ib));
-	r = amdgpu_ib_get(adev, NULL, 16,
-					AMDGPU_IB_POOL_DIRECT, &ib);
+
+	r = amdgpu_ib_get(adev, NULL, 20, AMDGPU_IB_POOL_DIRECT, &ib);
 	if (r)
 		goto err1;
 
-- 
2.42.0

[PATCH 6.1 154/194] drm/amd/amdgpu: Fix warnings in amdgpu/amdgpu_display.c

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>

[ Upstream commit 93125cb704919f572c01e02ef64923caff1c3164 ]

Fixes the below checkpatch.pl warnings:

WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
WARNING: suspect code indent for conditional statements (8, 12)
WARNING: braces {} are not necessary for single statement blocks

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: c6df7f313794 ("drm/amdgpu: correct the amdgpu runtime dereference usage count")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 42 ++++++++++++---------
 1 file changed, 25 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
index 2fced451f0aea..ee528ed639568 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
@@ -90,7 +90,7 @@ static void amdgpu_display_flip_work_func(struct work_struct *__work)
 
 	struct drm_crtc *crtc = &amdgpu_crtc->base;
 	unsigned long flags;
-	unsigned i;
+	unsigned int i;
 	int vpos, hpos;
 
 	for (i = 0; i < work->shared_count; ++i)
@@ -167,7 +167,7 @@ int amdgpu_display_crtc_page_flip_target(struct drm_crtc *crtc,
 	u64 tiling_flags;
 	int i, r;
 
-	work = kzalloc(sizeof *work, GFP_KERNEL);
+	work = kzalloc(sizeof(*work), GFP_KERNEL);
 	if (work == NULL)
 		return -ENOMEM;
 
@@ -298,13 +298,15 @@ int amdgpu_display_crtc_set_config(struct drm_mode_set *set,
 
 	adev = drm_to_adev(dev);
 	/* if we have active crtcs and we don't have a power ref,
-	   take the current one */
+	 * take the current one
+	 */
 	if (active && !adev->have_disp_power_ref) {
 		adev->have_disp_power_ref = true;
 		return ret;
 	}
 	/* if we have no active crtcs, then drop the power ref
-	   we got before */
+	 * we got before
+	 */
 	if (!active && adev->have_disp_power_ref) {
 		pm_runtime_put_autosuspend(dev->dev);
 		adev->have_disp_power_ref = false;
@@ -473,11 +475,10 @@ bool amdgpu_display_ddc_probe(struct amdgpu_connector *amdgpu_connector,
 	if (amdgpu_connector->router.ddc_valid)
 		amdgpu_i2c_router_select_ddc_port(amdgpu_connector);
 
-	if (use_aux) {
+	if (use_aux)
 		ret = i2c_transfer(&amdgpu_connector->ddc_bus->aux.ddc, msgs, 2);
-	} else {
+	else
 		ret = i2c_transfer(&amdgpu_connector->ddc_bus->adapter, msgs, 2);
-	}
 
 	if (ret != 2)
 		/* Couldn't find an accessible DDC on this connector */
@@ -486,10 +487,12 @@ bool amdgpu_display_ddc_probe(struct amdgpu_connector *amdgpu_connector,
 	 * EDID header starts with:
 	 * 0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00.
 	 * Only the first 6 bytes must be valid as
-	 * drm_edid_block_valid() can fix the last 2 bytes */
+	 * drm_edid_block_valid() can fix the last 2 bytes
+	 */
 	if (drm_edid_header_is_valid(buf) < 6) {
 		/* Couldn't find an accessible EDID on this
-		 * connector */
+		 * connector
+		 */
 		return false;
 	}
 	return true;
@@ -1204,8 +1207,10 @@ amdgpu_display_user_framebuffer_create(struct drm_device *dev,
 
 	obj = drm_gem_object_lookup(file_priv, mode_cmd->handles[0]);
 	if (obj ==  NULL) {
-		drm_dbg_kms(dev, "No GEM object associated to handle 0x%08X, "
-			    "can't create framebuffer\n", mode_cmd->handles[0]);
+		drm_dbg_kms(dev,
+			    "No GEM object associated to handle 0x%08X, can't create framebuffer\n",
+			    mode_cmd->handles[0]);
+
 		return ERR_PTR(-ENOENT);
 	}
 
@@ -1398,6 +1403,7 @@ bool amdgpu_display_crtc_scaling_mode_fixup(struct drm_crtc *crtc,
 	}
 	if (amdgpu_crtc->rmx_type != RMX_OFF) {
 		fixed20_12 a, b;
+
 		a.full = dfixed_const(src_v);
 		b.full = dfixed_const(dst_v);
 		amdgpu_crtc->vsc.full = dfixed_div(a, b);
@@ -1417,7 +1423,7 @@ bool amdgpu_display_crtc_scaling_mode_fixup(struct drm_crtc *crtc,
  *
  * \param dev Device to query.
  * \param pipe Crtc to query.
- * \param flags Flags from caller (DRM_CALLED_FROM_VBLIRQ or 0).
+ * \param flags from caller (DRM_CALLED_FROM_VBLIRQ or 0).
  *              For driver internal use only also supports these flags:
  *
  *              USE_REAL_VBLANKSTART to use the real start of vblank instead
@@ -1493,8 +1499,8 @@ int amdgpu_display_get_crtc_scanoutpos(struct drm_device *dev,
 
 	/* Called from driver internal vblank counter query code? */
 	if (flags & GET_DISTANCE_TO_VBLANKSTART) {
-	    /* Caller wants distance from real vbl_start in *hpos */
-	    *hpos = *vpos - vbl_start;
+		/* Caller wants distance from real vbl_start in *hpos */
+		*hpos = *vpos - vbl_start;
 	}
 
 	/* Fudge vblank to start a few scanlines earlier to handle the
@@ -1516,7 +1522,7 @@ int amdgpu_display_get_crtc_scanoutpos(struct drm_device *dev,
 
 	/* In vblank? */
 	if (in_vbl)
-	    ret |= DRM_SCANOUTPOS_IN_VBLANK;
+		ret |= DRM_SCANOUTPOS_IN_VBLANK;
 
 	/* Called from driver internal vblank counter query code? */
 	if (flags & GET_DISTANCE_TO_VBLANKSTART) {
@@ -1622,6 +1628,7 @@ int amdgpu_display_suspend_helper(struct amdgpu_device *adev)
 
 		if (amdgpu_crtc->cursor_bo && !adev->enable_virtual_display) {
 			struct amdgpu_bo *aobj = gem_to_amdgpu_bo(amdgpu_crtc->cursor_bo);
+
 			r = amdgpu_bo_reserve(aobj, true);
 			if (r == 0) {
 				amdgpu_bo_unpin(aobj);
@@ -1629,9 +1636,9 @@ int amdgpu_display_suspend_helper(struct amdgpu_device *adev)
 			}
 		}
 
-		if (fb == NULL || fb->obj[0] == NULL) {
+		if (!fb || !fb->obj[0])
 			continue;
-		}
+
 		robj = gem_to_amdgpu_bo(fb->obj[0]);
 		if (!amdgpu_display_robj_is_fb(adev, robj)) {
 			r = amdgpu_bo_reserve(robj, true);
@@ -1658,6 +1665,7 @@ int amdgpu_display_resume_helper(struct amdgpu_device *adev)
 
 		if (amdgpu_crtc->cursor_bo && !adev->enable_virtual_display) {
 			struct amdgpu_bo *aobj = gem_to_amdgpu_bo(amdgpu_crtc->cursor_bo);
+
 			r = amdgpu_bo_reserve(aobj, true);
 			if (r == 0) {
 				r = amdgpu_bo_pin(aobj, AMDGPU_GEM_DOMAIN_VRAM);
-- 
2.42.0

[PATCH 6.1 155/194] drm/amdgpu: correct the amdgpu runtime dereference usage count

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Prike Liang <Prike.Liang@amd.com>

[ Upstream commit c6df7f313794c3ad41a49b9a7c95da369db607f3 ]

Fix the amdgpu runpm dereference usage count.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
index ee528ed639568..aabde6ebb190e 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
@@ -304,14 +304,11 @@ int amdgpu_display_crtc_set_config(struct drm_mode_set *set,
 		adev->have_disp_power_ref = true;
 		return ret;
 	}
-	/* if we have no active crtcs, then drop the power ref
-	 * we got before
+	/* if we have no active crtcs, then go to
+	 * drop the power ref we got before
 	 */
-	if (!active && adev->have_disp_power_ref) {
-		pm_runtime_put_autosuspend(dev->dev);
+	if (!active && adev->have_disp_power_ref)
 		adev->have_disp_power_ref = false;
-	}
-
 out:
 	/* drop the power reference we got coming in here */
 	pm_runtime_put_autosuspend(dev->dev);
-- 
2.42.0

[PATCH 6.1 156/194] drm/amdgpu: Update ras eeprom support for smu v13_0_0 and v13_0_10

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Candice Li <candice.li@amd.com>

[ Upstream commit bc22f8ec464af9e14263c3ed6a1c2be86618c804 ]

Enable RAS EEPROM support for smu v13_0_0 and v13_0_10.

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: e0409021e34a ("drm/amdgpu: Update EEPROM I2C address for smu v13_0_0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
index 84c241b9a2a13..7dc39154822c5 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
@@ -90,6 +90,16 @@
 
 static bool __is_ras_eeprom_supported(struct amdgpu_device *adev)
 {
+	if (adev->asic_type == CHIP_IP_DISCOVERY) {
+		switch (adev->ip_versions[MP1_HWIP][0]) {
+		case IP_VERSION(13, 0, 0):
+		case IP_VERSION(13, 0, 10):
+			return true;
+		default:
+			return false;
+		}
+	}
+
 	return  adev->asic_type == CHIP_VEGA20 ||
 		adev->asic_type == CHIP_ARCTURUS ||
 		adev->asic_type == CHIP_SIENNA_CICHLID ||
-- 
2.42.0

[PATCH 6.1 157/194] drm/amdgpu: Add EEPROM I2C address support for ip discovery

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Candice Li <candice.li@amd.com>

[ Upstream commit c9bdc6c3cf39df6db9c611d05fc512b1276b1cc8 ]

1. Update EEPROM_I2C_MADDR_SMU_13_0_0 to EEPROM_I2C_MADDR_54H
2. Add EEPROM I2C address support for smu v13_0_0 and v13_0_10.

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: e0409021e34a ("drm/amdgpu: Update EEPROM I2C address for smu v13_0_0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c    | 20 +++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
index 7dc39154822c5..7268ae65c140c 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
@@ -38,7 +38,7 @@
 #define EEPROM_I2C_MADDR_ARCTURUS_D342  0x0
 #define EEPROM_I2C_MADDR_SIENNA_CICHLID 0x0
 #define EEPROM_I2C_MADDR_ALDEBARAN      0x0
-#define EEPROM_I2C_MADDR_SMU_13_0_0     (0x54UL << 16)
+#define EEPROM_I2C_MADDR_54H            (0x54UL << 16)
 
 /*
  * The 2 macros bellow represent the actual size in bytes that
@@ -124,6 +124,19 @@ static bool __get_eeprom_i2c_addr_arct(struct amdgpu_device *adev,
 	return true;
 }
 
+static bool __get_eeprom_i2c_addr_ip_discovery(struct amdgpu_device *adev,
+				       struct amdgpu_ras_eeprom_control *control)
+{
+	switch (adev->ip_versions[MP1_HWIP][0]) {
+	case IP_VERSION(13, 0, 0):
+	case IP_VERSION(13, 0, 10):
+		control->i2c_address = EEPROM_I2C_MADDR_54H;
+		return true;
+	default:
+		return false;
+	}
+}
+
 static bool __get_eeprom_i2c_addr(struct amdgpu_device *adev,
 				  struct amdgpu_ras_eeprom_control *control)
 {
@@ -163,13 +176,16 @@ static bool __get_eeprom_i2c_addr(struct amdgpu_device *adev,
 		control->i2c_address = EEPROM_I2C_MADDR_ALDEBARAN;
 		break;
 
+	case CHIP_IP_DISCOVERY:
+		return __get_eeprom_i2c_addr_ip_discovery(adev, control);
+
 	default:
 		return false;
 	}
 
 	switch (adev->ip_versions[MP1_HWIP][0]) {
 	case IP_VERSION(13, 0, 0):
-		control->i2c_address = EEPROM_I2C_MADDR_SMU_13_0_0;
+		control->i2c_address = EEPROM_I2C_MADDR_54H;
 		break;
 
 	default:
-- 
2.42.0

[PATCH 6.1 158/194] drm/amdgpu: Remove redundant I2C EEPROM address

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luben Tuikov <luben.tuikov@amd.com>

[ Upstream commit da858deab88eb561f2196bc99b6dbd2320e56456 ]

Remove redundant EEPROM_I2C_MADDR_54H address, since we already have it
represented (ARCTURUS), and since we don't include the I2C device type
identifier in EEPROM memory addresses, i.e. that high up in the device
abstraction--we only use EEPROM memory addresses, as memory is continuously
represented by EEPROM device(s) on the I2C bus.

Add a comment describing what these memory addresses are, how they come
about and how they're usually extracted from the device address byte.

Cc: Candice Li <candice.li@amd.com>
Cc: Tao Zhou <tao.zhou1@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Fixes: c9bdc6c3cf39df ("drm/amdgpu: Add EEPROM I2C address support for ip discovery")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: e0409021e34a ("drm/amdgpu: Update EEPROM I2C address for smu v13_0_0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_eeprom.c    |  2 ++
 .../gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c    | 24 ++++++++++++++++---
 2 files changed, 23 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_eeprom.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_eeprom.c
index 4d9eb0137f8c4..d6c4293829aab 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_eeprom.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_eeprom.c
@@ -79,6 +79,8 @@
  * That is, for an I2C EEPROM driver everything is controlled by
  * the "eeprom_addr".
  *
+ * See also top of amdgpu_ras_eeprom.c.
+ *
  * P.S. If you need to write, lock and read the Identification Page,
  * (M24M02-DR device only, which we do not use), change the "7" to
  * "0xF" in the macro below, and let the client set bit 20 to 1 in
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
index 7268ae65c140c..1bb92a64f24af 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
@@ -33,12 +33,30 @@
 
 #include "amdgpu_reset.h"
 
+/* These are memory addresses as would be seen by one or more EEPROM
+ * chips strung on the I2C bus, usually by manipulating pins 1-3 of a
+ * set of EEPROM devices. They form a continuous memory space.
+ *
+ * The I2C device address includes the device type identifier, 1010b,
+ * which is a reserved value and indicates that this is an I2C EEPROM
+ * device. It also includes the top 3 bits of the 19 bit EEPROM memory
+ * address, namely bits 18, 17, and 16. This makes up the 7 bit
+ * address sent on the I2C bus with bit 0 being the direction bit,
+ * which is not represented here, and sent by the hardware directly.
+ *
+ * For instance,
+ *   50h = 1010000b => device type identifier 1010b, bits 18:16 = 000b, address 0.
+ *   54h = 1010100b => --"--, bits 18:16 = 100b, address 40000h.
+ *   56h = 1010110b => --"--, bits 18:16 = 110b, address 60000h.
+ * Depending on the size of the I2C EEPROM device(s), bits 18:16 may
+ * address memory in a device or a device on the I2C bus, depending on
+ * the status of pins 1-3. See top of amdgpu_eeprom.c.
+ */
 #define EEPROM_I2C_MADDR_VEGA20         0x0
 #define EEPROM_I2C_MADDR_ARCTURUS       0x40000
 #define EEPROM_I2C_MADDR_ARCTURUS_D342  0x0
 #define EEPROM_I2C_MADDR_SIENNA_CICHLID 0x0
 #define EEPROM_I2C_MADDR_ALDEBARAN      0x0
-#define EEPROM_I2C_MADDR_54H            (0x54UL << 16)
 
 /*
  * The 2 macros bellow represent the actual size in bytes that
@@ -130,7 +148,7 @@ static bool __get_eeprom_i2c_addr_ip_discovery(struct amdgpu_device *adev,
 	switch (adev->ip_versions[MP1_HWIP][0]) {
 	case IP_VERSION(13, 0, 0):
 	case IP_VERSION(13, 0, 10):
-		control->i2c_address = EEPROM_I2C_MADDR_54H;
+		control->i2c_address = EEPROM_I2C_MADDR_ARCTURUS;
 		return true;
 	default:
 		return false;
@@ -185,7 +203,7 @@ static bool __get_eeprom_i2c_addr(struct amdgpu_device *adev,
 
 	switch (adev->ip_versions[MP1_HWIP][0]) {
 	case IP_VERSION(13, 0, 0):
-		control->i2c_address = EEPROM_I2C_MADDR_54H;
+		control->i2c_address = EEPROM_I2C_MADDR_ARCTURUS;
 		break;
 
 	default:
-- 
2.42.0

[PATCH 6.1 159/194] drm/amdgpu: Decouple RAS EEPROM addresses from chips

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luben Tuikov <luben.tuikov@amd.com>

[ Upstream commit 3b8164f8084ff7888ed24970efa230ff5d36eda8 ]

Abstract RAS I2C EEPROM addresses from chip names, and set their macro
definition names to the address they set, not the chip they attach
to. Since most chips either use I2C EEPROM address 0 or 40000h for the RAS
table start offset, this leaves us with only two macro definitions as
opposed to five, and removes the redundancy of four.

Cc: Candice Li <candice.li@amd.com>
Cc: Tao Zhou <tao.zhou1@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: e0409021e34a ("drm/amdgpu: Update EEPROM I2C address for smu v13_0_0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c    | 23 +++++++++----------
 1 file changed, 11 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
index 1bb92a64f24af..f63bd31e199c8 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
@@ -51,12 +51,11 @@
  * Depending on the size of the I2C EEPROM device(s), bits 18:16 may
  * address memory in a device or a device on the I2C bus, depending on
  * the status of pins 1-3. See top of amdgpu_eeprom.c.
+ *
+ * The RAS table lives either at address 0 or address 40000h of EEPROM.
  */
-#define EEPROM_I2C_MADDR_VEGA20         0x0
-#define EEPROM_I2C_MADDR_ARCTURUS       0x40000
-#define EEPROM_I2C_MADDR_ARCTURUS_D342  0x0
-#define EEPROM_I2C_MADDR_SIENNA_CICHLID 0x0
-#define EEPROM_I2C_MADDR_ALDEBARAN      0x0
+#define EEPROM_I2C_MADDR_0      0x0
+#define EEPROM_I2C_MADDR_4      0x40000
 
 /*
  * The 2 macros bellow represent the actual size in bytes that
@@ -135,9 +134,9 @@ static bool __get_eeprom_i2c_addr_arct(struct amdgpu_device *adev,
 	if (strnstr(atom_ctx->vbios_version,
 	            "D342",
 		    sizeof(atom_ctx->vbios_version)))
-		control->i2c_address = EEPROM_I2C_MADDR_ARCTURUS_D342;
+		control->i2c_address = EEPROM_I2C_MADDR_0;
 	else
-		control->i2c_address = EEPROM_I2C_MADDR_ARCTURUS;
+		control->i2c_address = EEPROM_I2C_MADDR_4;
 
 	return true;
 }
@@ -148,7 +147,7 @@ static bool __get_eeprom_i2c_addr_ip_discovery(struct amdgpu_device *adev,
 	switch (adev->ip_versions[MP1_HWIP][0]) {
 	case IP_VERSION(13, 0, 0):
 	case IP_VERSION(13, 0, 10):
-		control->i2c_address = EEPROM_I2C_MADDR_ARCTURUS;
+		control->i2c_address = EEPROM_I2C_MADDR_4;
 		return true;
 	default:
 		return false;
@@ -180,18 +179,18 @@ static bool __get_eeprom_i2c_addr(struct amdgpu_device *adev,
 
 	switch (adev->asic_type) {
 	case CHIP_VEGA20:
-		control->i2c_address = EEPROM_I2C_MADDR_VEGA20;
+		control->i2c_address = EEPROM_I2C_MADDR_0;
 		break;
 
 	case CHIP_ARCTURUS:
 		return __get_eeprom_i2c_addr_arct(adev, control);
 
 	case CHIP_SIENNA_CICHLID:
-		control->i2c_address = EEPROM_I2C_MADDR_SIENNA_CICHLID;
+		control->i2c_address = EEPROM_I2C_MADDR_0;
 		break;
 
 	case CHIP_ALDEBARAN:
-		control->i2c_address = EEPROM_I2C_MADDR_ALDEBARAN;
+		control->i2c_address = EEPROM_I2C_MADDR_0;
 		break;
 
 	case CHIP_IP_DISCOVERY:
@@ -203,7 +202,7 @@ static bool __get_eeprom_i2c_addr(struct amdgpu_device *adev,
 
 	switch (adev->ip_versions[MP1_HWIP][0]) {
 	case IP_VERSION(13, 0, 0):
-		control->i2c_address = EEPROM_I2C_MADDR_ARCTURUS;
+		control->i2c_address = EEPROM_I2C_MADDR_4;
 		break;
 
 	default:
-- 
2.42.0

[PATCH 6.1 160/194] drm/amdgpu: Add support for RAS table at 0x40000

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luben Tuikov <luben.tuikov@amd.com>

[ Upstream commit 64a3dbb06ad88d89a0958ccafc4f01611657f641 ]

Add support for RAS table at I2C EEPROM address of 0x40000, since on some
ASICs it is not at 0, but at 0x40000.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Tested-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: e0409021e34a ("drm/amdgpu: Update EEPROM I2C address for smu v13_0_0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
index f63bd31e199c8..2d9f3f4cd79e9 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
@@ -157,6 +157,7 @@ static bool __get_eeprom_i2c_addr_ip_discovery(struct amdgpu_device *adev,
 static bool __get_eeprom_i2c_addr(struct amdgpu_device *adev,
 				  struct amdgpu_ras_eeprom_control *control)
 {
+	struct atom_context *atom_ctx = adev->mode_info.atom_context;
 	u8 i2c_addr;
 
 	if (!control)
@@ -190,7 +191,11 @@ static bool __get_eeprom_i2c_addr(struct amdgpu_device *adev,
 		break;
 
 	case CHIP_ALDEBARAN:
-		control->i2c_address = EEPROM_I2C_MADDR_0;
+		if (strnstr(atom_ctx->vbios_version, "D673",
+			    sizeof(atom_ctx->vbios_version)))
+			control->i2c_address = EEPROM_I2C_MADDR_4;
+		else
+			control->i2c_address = EEPROM_I2C_MADDR_0;
 		break;
 
 	case CHIP_IP_DISCOVERY:
-- 
2.42.0

[PATCH 6.1 161/194] drm/amdgpu: Remove second moot switch to set EEPROM I2C address

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luben Tuikov <luben.tuikov@amd.com>

[ Upstream commit 1bb745d7596d2b368fd9afb90473f3581495e39d ]

Remove second switch since it already has its own function and case in the
first switch. This also avoids requalifying the EEPROM I2C address for VEGA20,
SIENNA CICHLID, and ALDEBARAN, as those have been set by the first switch and
shouldn't match SMU v13.0.x.

Cc: Candice Li <candice.li@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Fixes: 158225294683 ("drm/amdgpu: Add EEPROM I2C address for smu v13_0_0")
Fixes: c9bdc6c3cf39 ("drm/amdgpu: Add EEPROM I2C address support for ip discovery")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: e0409021e34a ("drm/amdgpu: Update EEPROM I2C address for smu v13_0_0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
index 2d9f3f4cd79e9..b908d575b5a98 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
@@ -205,15 +205,6 @@ static bool __get_eeprom_i2c_addr(struct amdgpu_device *adev,
 		return false;
 	}
 
-	switch (adev->ip_versions[MP1_HWIP][0]) {
-	case IP_VERSION(13, 0, 0):
-		control->i2c_address = EEPROM_I2C_MADDR_4;
-		break;
-
-	default:
-		break;
-	}
-
 	return true;
 }
 
-- 
2.42.0

[PATCH 6.1 162/194] drm/amdgpu: Return from switch early for EEPROM I2C address

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luben Tuikov <luben.tuikov@amd.com>

[ Upstream commit 8782007b5f5795f118c5167f46d8c8142abcc92f ]

As soon as control->i2c_address is set, return; remove the "break;" from the
switch--it is unnecessary. This mimics what happens when for some cases in the
switch, we call helper functions with "return <helper function>".

Remove final function "return true;" to indicate that the switch is final and
terminal, and that there should be no code after the switch.

Cc: Candice Li <candice.li@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: e0409021e34a ("drm/amdgpu: Update EEPROM I2C address for smu v13_0_0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
index b908d575b5a98..40cd9d8c4e870 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
@@ -181,14 +181,14 @@ static bool __get_eeprom_i2c_addr(struct amdgpu_device *adev,
 	switch (adev->asic_type) {
 	case CHIP_VEGA20:
 		control->i2c_address = EEPROM_I2C_MADDR_0;
-		break;
+		return true;
 
 	case CHIP_ARCTURUS:
 		return __get_eeprom_i2c_addr_arct(adev, control);
 
 	case CHIP_SIENNA_CICHLID:
 		control->i2c_address = EEPROM_I2C_MADDR_0;
-		break;
+		return true;
 
 	case CHIP_ALDEBARAN:
 		if (strnstr(atom_ctx->vbios_version, "D673",
@@ -196,7 +196,7 @@ static bool __get_eeprom_i2c_addr(struct amdgpu_device *adev,
 			control->i2c_address = EEPROM_I2C_MADDR_4;
 		else
 			control->i2c_address = EEPROM_I2C_MADDR_0;
-		break;
+		return true;
 
 	case CHIP_IP_DISCOVERY:
 		return __get_eeprom_i2c_addr_ip_discovery(adev, control);
@@ -204,8 +204,6 @@ static bool __get_eeprom_i2c_addr(struct amdgpu_device *adev,
 	default:
 		return false;
 	}
-
-	return true;
 }
 
 static void
-- 
2.42.0

[PATCH 6.1 163/194] drm/amdgpu: simplify amdgpu_ras_eeprom.c

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

[ Upstream commit 6246059a19d4cd32ef1af42a6ab016b779cd68c4 ]

All chips that support RAS also support IP discovery, so
use the IP versions rather than a mix of IP versions and
asic types.  Checking the validity of the atom_ctx pointer
is not required as the vbios is already fetched at this
point.

v2: add comments to id asic types based on feedback from Luben

Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Stable-dep-of: e0409021e34a ("drm/amdgpu: Update EEPROM I2C address for smu v13_0_0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c    | 72 ++++++-------------
 1 file changed, 20 insertions(+), 52 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
index 40cd9d8c4e870..c2827edb9d3d9 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
@@ -106,48 +106,13 @@
 #define to_amdgpu_device(x) (container_of(x, struct amdgpu_ras, eeprom_control))->adev
 
 static bool __is_ras_eeprom_supported(struct amdgpu_device *adev)
-{
-	if (adev->asic_type == CHIP_IP_DISCOVERY) {
-		switch (adev->ip_versions[MP1_HWIP][0]) {
-		case IP_VERSION(13, 0, 0):
-		case IP_VERSION(13, 0, 10):
-			return true;
-		default:
-			return false;
-		}
-	}
-
-	return  adev->asic_type == CHIP_VEGA20 ||
-		adev->asic_type == CHIP_ARCTURUS ||
-		adev->asic_type == CHIP_SIENNA_CICHLID ||
-		adev->asic_type == CHIP_ALDEBARAN;
-}
-
-static bool __get_eeprom_i2c_addr_arct(struct amdgpu_device *adev,
-				       struct amdgpu_ras_eeprom_control *control)
-{
-	struct atom_context *atom_ctx = adev->mode_info.atom_context;
-
-	if (!control || !atom_ctx)
-		return false;
-
-	if (strnstr(atom_ctx->vbios_version,
-	            "D342",
-		    sizeof(atom_ctx->vbios_version)))
-		control->i2c_address = EEPROM_I2C_MADDR_0;
-	else
-		control->i2c_address = EEPROM_I2C_MADDR_4;
-
-	return true;
-}
-
-static bool __get_eeprom_i2c_addr_ip_discovery(struct amdgpu_device *adev,
-				       struct amdgpu_ras_eeprom_control *control)
 {
 	switch (adev->ip_versions[MP1_HWIP][0]) {
+	case IP_VERSION(11, 0, 2): /* VEGA20 and ARCTURUS */
+	case IP_VERSION(11, 0, 7): /* Sienna cichlid */
 	case IP_VERSION(13, 0, 0):
+	case IP_VERSION(13, 0, 2): /* Aldebaran */
 	case IP_VERSION(13, 0, 10):
-		control->i2c_address = EEPROM_I2C_MADDR_4;
 		return true;
 	default:
 		return false;
@@ -178,29 +143,32 @@ static bool __get_eeprom_i2c_addr(struct amdgpu_device *adev,
 		return true;
 	}
 
-	switch (adev->asic_type) {
-	case CHIP_VEGA20:
-		control->i2c_address = EEPROM_I2C_MADDR_0;
+	switch (adev->ip_versions[MP1_HWIP][0]) {
+	case IP_VERSION(11, 0, 2):
+		/* VEGA20 and ARCTURUS */
+		if (adev->asic_type == CHIP_VEGA20)
+			control->i2c_address = EEPROM_I2C_MADDR_0;
+		else if (strnstr(atom_ctx->vbios_version,
+				 "D342",
+				 sizeof(atom_ctx->vbios_version)))
+			control->i2c_address = EEPROM_I2C_MADDR_0;
+		else
+			control->i2c_address = EEPROM_I2C_MADDR_4;
 		return true;
-
-	case CHIP_ARCTURUS:
-		return __get_eeprom_i2c_addr_arct(adev, control);
-
-	case CHIP_SIENNA_CICHLID:
+	case IP_VERSION(11, 0, 7):
 		control->i2c_address = EEPROM_I2C_MADDR_0;
 		return true;
-
-	case CHIP_ALDEBARAN:
+	case IP_VERSION(13, 0, 2):
 		if (strnstr(atom_ctx->vbios_version, "D673",
 			    sizeof(atom_ctx->vbios_version)))
 			control->i2c_address = EEPROM_I2C_MADDR_4;
 		else
 			control->i2c_address = EEPROM_I2C_MADDR_0;
 		return true;
-
-	case CHIP_IP_DISCOVERY:
-		return __get_eeprom_i2c_addr_ip_discovery(adev, control);
-
+	case IP_VERSION(13, 0, 0):
+	case IP_VERSION(13, 0, 10):
+		control->i2c_address = EEPROM_I2C_MADDR_4;
+		return true;
 	default:
 		return false;
 	}
-- 
2.42.0

[PATCH 6.1 164/194] drm/amdgpu: Add I2C EEPROM support on smu v13_0_6

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Candice Li <candice.li@amd.com>

[ Upstream commit b81fde0dfe402e864ef1ac506eba756c89f1ad32 ]

Support I2C EEPROM on smu v13_0_6.

v2: Move IP_VERSION(13, 0, 6) ahead of IP_VERSION(13, 0, 10).

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: e0409021e34a ("drm/amdgpu: Update EEPROM I2C address for smu v13_0_0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
index c2827edb9d3d9..47406456e2707 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
@@ -112,6 +112,7 @@ static bool __is_ras_eeprom_supported(struct amdgpu_device *adev)
 	case IP_VERSION(11, 0, 7): /* Sienna cichlid */
 	case IP_VERSION(13, 0, 0):
 	case IP_VERSION(13, 0, 2): /* Aldebaran */
+	case IP_VERSION(13, 0, 6):
 	case IP_VERSION(13, 0, 10):
 		return true;
 	default:
@@ -166,6 +167,7 @@ static bool __get_eeprom_i2c_addr(struct amdgpu_device *adev,
 			control->i2c_address = EEPROM_I2C_MADDR_0;
 		return true;
 	case IP_VERSION(13, 0, 0):
+	case IP_VERSION(13, 0, 6):
 	case IP_VERSION(13, 0, 10):
 		control->i2c_address = EEPROM_I2C_MADDR_4;
 		return true;
-- 
2.42.0

[PATCH 6.1 165/194] drm/amdgpu: Update EEPROM I2C address for smu v13_0_0

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Candice Li <candice.li@amd.com>

[ Upstream commit e0409021e34af50e7b6f31635c8d21583d7c43dd ]

Check smu v13_0_0 SKU type to select EEPROM I2C address.

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
index 47406456e2707..f5f747cfe90a1 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
@@ -167,6 +167,12 @@ static bool __get_eeprom_i2c_addr(struct amdgpu_device *adev,
 			control->i2c_address = EEPROM_I2C_MADDR_0;
 		return true;
 	case IP_VERSION(13, 0, 0):
+		if (strnstr(atom_ctx->vbios_pn, "D707",
+			    sizeof(atom_ctx->vbios_pn)))
+			control->i2c_address = EEPROM_I2C_MADDR_0;
+		else
+			control->i2c_address = EEPROM_I2C_MADDR_4;
+		return true;
 	case IP_VERSION(13, 0, 6):
 	case IP_VERSION(13, 0, 10):
 		control->i2c_address = EEPROM_I2C_MADDR_4;
-- 
2.42.0

[PATCH 6.1 166/194] usb: gadget: f_hid: fix report descriptor allocation

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konstantin Aladyshev <aladyshev22@gmail.com>

commit 61890dc28f7d9e9aac8a9471302613824c22fae4 upstream.

The commit 89ff3dfac604 ("usb: gadget: f_hid: fix f_hidg lifetime vs
cdev") has introduced a bug that leads to hid device corruption after
the replug operation.
Reverse device managed memory allocation for the report descriptor
to fix the issue.

Tested:
This change was tested on the AMD EthanolX CRB server with the BMC
based on the OpenBMC distribution. The BMC provides KVM functionality
via the USB gadget device:
- before: KVM page refresh results in a broken USB device,
- after: KVM page refresh works without any issues.

Fixes: 89ff3dfac604 ("usb: gadget: f_hid: fix f_hidg lifetime vs cdev")
Cc: stable@vger.kernel.org
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Link: https://lore.kernel.org/r/20231206080744.253-2-aladyshev22@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/f_hid.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -88,6 +88,7 @@ static void hidg_release(struct device *
 {
 	struct f_hidg *hidg = container_of(dev, struct f_hidg, dev);
 
+	kfree(hidg->report_desc);
 	kfree(hidg->set_report_buf);
 	kfree(hidg);
 }
@@ -1287,9 +1288,9 @@ static struct usb_function *hidg_alloc(s
 	hidg->report_length = opts->report_length;
 	hidg->report_desc_length = opts->report_desc_length;
 	if (opts->report_desc) {
-		hidg->report_desc = devm_kmemdup(&hidg->dev, opts->report_desc,
-						 opts->report_desc_length,
-						 GFP_KERNEL);
+		hidg->report_desc = kmemdup(opts->report_desc,
+					    opts->report_desc_length,
+					    GFP_KERNEL);
 		if (!hidg->report_desc) {
 			put_device(&hidg->dev);
 			--opts->refcnt;

[PATCH 6.1 167/194] serial: 8250_dw: Add ACPI ID for Granite Rapids-D UART

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

commit e92fad024929c79460403acf946bc9c09ce5c3a9 upstream.

Granite Rapids-D has an additional UART that is enumerated via ACPI.
Add ACPI ID for it.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20231205195524.2705965-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_dw.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -795,6 +795,7 @@ static const struct acpi_device_id dw825
 	{ "INT33C5", (kernel_ulong_t)&dw8250_dw_apb },
 	{ "INT3434", (kernel_ulong_t)&dw8250_dw_apb },
 	{ "INT3435", (kernel_ulong_t)&dw8250_dw_apb },
+	{ "INTC10EE", (kernel_ulong_t)&dw8250_dw_apb },
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match);

[PATCH 6.1 168/194] parport: Add support for Brainboxes IX/UC/PX parallel cards

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cameron Williams <cang1@live.co.uk>

commit 1a031f6edc460e9562098bdedc3918da07c30a6e upstream.

Adds support for Intashield IX-500/IX-550, UC-146/UC-157, PX-146/PX-157,
PX-203 and PX-475 (LPT port)

Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/AS4PR02MB790389C130410BD864C8DCC9C4A6A@AS4PR02MB7903.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/parport/parport_pc.c |   21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -2614,6 +2614,8 @@ enum parport_pc_pci_cards {
 	netmos_9865,
 	quatech_sppxp100,
 	wch_ch382l,
+	brainboxes_uc146,
+	brainboxes_px203,
 };
 
 
@@ -2678,6 +2680,8 @@ static struct parport_pc_pci {
 	/* netmos_9865 */               { 1, { { 0, -1 }, } },
 	/* quatech_sppxp100 */		{ 1, { { 0, 1 }, } },
 	/* wch_ch382l */		{ 1, { { 2, -1 }, } },
+	/* brainboxes_uc146 */	{ 1, { { 3, -1 }, } },
+	/* brainboxes_px203 */	{ 1, { { 0, -1 }, } },
 };
 
 static const struct pci_device_id parport_pc_pci_tbl[] = {
@@ -2771,6 +2775,23 @@ static const struct pci_device_id parpor
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 },
 	/* WCH CH382L PCI-E single parallel port card */
 	{ 0x1c00, 0x3050, 0x1c00, 0x3050, 0, 0, wch_ch382l },
+	/* Brainboxes IX-500/550 */
+	{ PCI_VENDOR_ID_INTASHIELD, 0x402a,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport },
+	/* Brainboxes UC-146/UC-157 */
+	{ PCI_VENDOR_ID_INTASHIELD, 0x0be1,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_uc146 },
+	{ PCI_VENDOR_ID_INTASHIELD, 0x0be2,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_uc146 },
+	/* Brainboxes PX-146/PX-257 */
+	{ PCI_VENDOR_ID_INTASHIELD, 0x401c,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport },
+	/* Brainboxes PX-203 */
+	{ PCI_VENDOR_ID_INTASHIELD, 0x4007,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_px203 },
+	/* Brainboxes PX-475 */
+	{ PCI_VENDOR_ID_INTASHIELD, 0x401f,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport },
 	{ 0, } /* terminate list */
 };
 MODULE_DEVICE_TABLE(pci, parport_pc_pci_tbl);

[PATCH 6.1 169/194] cifs: Fix non-availability of dedup breaking generic/304

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Howells <dhowells@redhat.com>

commit 691a41d8da4b34fe72f09393505f55f28a8f34ec upstream.

Deduplication isn't supported on cifs, but cifs doesn't reject it, instead
treating it as extent duplication/cloning.  This can cause generic/304 to go
silly and run for hours on end.

Fix cifs to indicate EOPNOTSUPP if REMAP_FILE_DEDUP is set in
->remap_file_range().

Note that it's unclear whether or not commit b073a08016a1 is meant to cause
cifs to return an error if REMAP_FILE_DEDUP.

Fixes: b073a08016a1 ("cifs: fix that return -EINVAL when do dedupe operation")
Cc: stable@vger.kernel.org
Suggested-by: Dave Chinner <david@fromorbit.com>
cc: Xiaoli Feng <fengxiaoli0714@gmail.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Darrick Wong <darrick.wong@oracle.com>
cc: fstests@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/3876191.1701555260@warthog.procyon.org.uk/
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/smb/client/cifsfs.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/fs/smb/client/cifsfs.c
+++ b/fs/smb/client/cifsfs.c
@@ -1203,7 +1203,9 @@ static loff_t cifs_remap_file_range(stru
 	unsigned int xid;
 	int rc;
 
-	if (remap_flags & ~(REMAP_FILE_DEDUP | REMAP_FILE_ADVISORY))
+	if (remap_flags & REMAP_FILE_DEDUP)
+		return -EOPNOTSUPP;
+	if (remap_flags & ~REMAP_FILE_ADVISORY)
 		return -EINVAL;
 
 	cifs_dbg(FYI, "clone range\n");

[PATCH 6.1 170/194] Revert "xhci: Loosen RPM as default policy to cover for AMD xHC 1.1"

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Nyman <mathias.nyman@linux.intel.com>

commit 24be0b3c40594a14b65141ced486ae327398faf8 upstream.

This reverts commit 4baf1218150985ee3ab0a27220456a1f027ea0ac.

Enabling runtime pm as default for all AMD xHC 1.1 controllers caused
regression. An initial attempt to fix those was done in commit a5d6264b638e
("xhci: Enable RPM on controllers that support low-power states") but new
issues are still seen.

Revert this to get those AMD xHC 1.1 systems working

This patch went to stable an needs to be reverted from there as well.

Fixes: 4baf12181509 ("xhci: Loosen RPM as default policy to cover for AMD xHC 1.1")
Link: https://lore.kernel.org/linux-usb/55c50bf5-bffb-454e-906e-4408c591cb63@molgen.mpg.de
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231205090548.1377667-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-pci.c |    2 --
 1 file changed, 2 deletions(-)

--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -348,8 +348,6 @@ static void xhci_pci_quirks(struct devic
 	/* xHC spec requires PCI devices to support D3hot and D3cold */
 	if (xhci->hci_version >= 0x120)
 		xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
-	else if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version >= 0x110)
-		xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
 
 	if (xhci->quirks & XHCI_RESET_ON_RESUME)
 		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,

[PATCH 6.1 171/194] smb: client: fix potential NULL deref in parse_dfs_referrals()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paulo Alcantara <pc@manguebit.com>

commit 92414333eb375ed64f4ae92d34d579e826936480 upstream.

If server returned no data for FSCTL_DFS_GET_REFERRALS, @dfs_rsp will
remain NULL and then parse_dfs_referrals() will dereference it.

Fix this by returning -EIO when no output data is returned.

Besides, we can't fix it in SMB2_ioctl() as some FSCTLs are allowed to
return no data as per MS-SMB2 2.2.32.

Fixes: 9d49640a21bf ("CIFS: implement get_dfs_refer for SMB2+")
Cc: stable@vger.kernel.org
Reported-by: Robert Morris <rtm@csail.mit.edu>
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/smb/client/smb2ops.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/fs/smb/client/smb2ops.c
+++ b/fs/smb/client/smb2ops.c
@@ -2834,6 +2834,8 @@ smb2_get_dfs_refer(const unsigned int xi
 		usleep_range(512, 2048);
 	} while (++retry_count < 5);
 
+	if (!rc && !dfs_rsp)
+		rc = -EIO;
 	if (rc) {
 		if (!is_retryable_error(rc) && rc != -ENOENT && rc != -EOPNOTSUPP)
 			cifs_tcon_dbg(VFS, "%s: ioctl error: rc=%d\n", __func__, rc);

[PATCH 6.1 172/194] usb: typec: class: fix typec_altmode_put_partner to put plugs

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: RD Babiera <rdbabiera@google.com>

commit b17b7fe6dd5c6ff74b38b0758ca799cdbb79e26e upstream.

When typec_altmode_put_partner is called by a plug altmode upon release,
the port altmode the plug belongs to will not remove its reference to the
plug. The check to see if the altmode being released evaluates against the
released altmode's partner instead of the calling altmode itself, so change
adev in typec_altmode_put_partner to properly refer to the altmode being
released.

typec_altmode_set_partner is not run for port altmodes, so also add a check
in typec_altmode_release to prevent typec_altmode_put_partner() calls on
port altmode release.

Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231129192349.1773623-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/typec/class.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/usb/typec/class.c
+++ b/drivers/usb/typec/class.c
@@ -267,7 +267,7 @@ static void typec_altmode_put_partner(st
 	if (!partner)
 		return;
 
-	adev = &partner->adev;
+	adev = &altmode->adev;
 
 	if (is_typec_plug(adev->dev.parent)) {
 		struct typec_plug *plug = to_typec_plug(adev->dev.parent);
@@ -497,7 +497,8 @@ static void typec_altmode_release(struct
 {
 	struct altmode *alt = to_altmode(to_typec_altmode(dev));
 
-	typec_altmode_put_partner(alt);
+	if (!is_typec_port(dev->parent))
+		typec_altmode_put_partner(alt);
 
 	altmode_id_remove(alt->adev.dev.parent, alt->id);
 	kfree(alt);

[PATCH 6.1 173/194] ARM: PL011: Fix DMA support

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

commit 58ac1b3799799069d53f5bf95c093f2fe8dd3cc5 upstream.

Since there is no guarantee that the memory returned by
dma_alloc_coherent() is associated with a 'struct page', using the
architecture specific phys_to_page() is wrong, but using
virt_to_page() would be as well.

Stop using sg lists altogether and just use the *_single() functions
instead. This also simplifies the code a bit since the scatterlists in
this driver always have only one entry anyway.

https://lore.kernel.org/lkml/86db0fe5-930d-4cbb-bd7d-03367da38951@app.fastmail.com/
    Use consistent names for dma buffers

gc: Add a commit log from the initial thread:
https://lore.kernel.org/lkml/86db0fe5-930d-4cbb-bd7d-03367da38951@app.fastmail.com/
    Use consistent names for dma buffers

Fixes: cb06ff102e2d7 ("ARM: PL011: Add support for Rx DMA buffer polling.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20231122171503.235649-1-gregory.clement@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/amba-pl011.c |  112 +++++++++++++++++++---------------------
 1 file changed, 54 insertions(+), 58 deletions(-)

--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -218,17 +218,18 @@ static struct vendor_data vendor_st = {
 
 /* Deals with DMA transactions */
 
-struct pl011_sgbuf {
-	struct scatterlist sg;
-	char *buf;
+struct pl011_dmabuf {
+	dma_addr_t		dma;
+	size_t			len;
+	char			*buf;
 };
 
 struct pl011_dmarx_data {
 	struct dma_chan		*chan;
 	struct completion	complete;
 	bool			use_buf_b;
-	struct pl011_sgbuf	sgbuf_a;
-	struct pl011_sgbuf	sgbuf_b;
+	struct pl011_dmabuf	dbuf_a;
+	struct pl011_dmabuf	dbuf_b;
 	dma_cookie_t		cookie;
 	bool			running;
 	struct timer_list	timer;
@@ -241,7 +242,8 @@ struct pl011_dmarx_data {
 
 struct pl011_dmatx_data {
 	struct dma_chan		*chan;
-	struct scatterlist	sg;
+	dma_addr_t		dma;
+	size_t			len;
 	char			*buf;
 	bool			queued;
 };
@@ -365,32 +367,24 @@ static int pl011_fifo_to_tty(struct uart
 
 #define PL011_DMA_BUFFER_SIZE PAGE_SIZE
 
-static int pl011_sgbuf_init(struct dma_chan *chan, struct pl011_sgbuf *sg,
+static int pl011_dmabuf_init(struct dma_chan *chan, struct pl011_dmabuf *db,
 	enum dma_data_direction dir)
 {
-	dma_addr_t dma_addr;
-
-	sg->buf = dma_alloc_coherent(chan->device->dev,
-		PL011_DMA_BUFFER_SIZE, &dma_addr, GFP_KERNEL);
-	if (!sg->buf)
+	db->buf = dma_alloc_coherent(chan->device->dev, PL011_DMA_BUFFER_SIZE,
+				     &db->dma, GFP_KERNEL);
+	if (!db->buf)
 		return -ENOMEM;
-
-	sg_init_table(&sg->sg, 1);
-	sg_set_page(&sg->sg, phys_to_page(dma_addr),
-		PL011_DMA_BUFFER_SIZE, offset_in_page(dma_addr));
-	sg_dma_address(&sg->sg) = dma_addr;
-	sg_dma_len(&sg->sg) = PL011_DMA_BUFFER_SIZE;
+	db->len = PL011_DMA_BUFFER_SIZE;
 
 	return 0;
 }
 
-static void pl011_sgbuf_free(struct dma_chan *chan, struct pl011_sgbuf *sg,
+static void pl011_dmabuf_free(struct dma_chan *chan, struct pl011_dmabuf *db,
 	enum dma_data_direction dir)
 {
-	if (sg->buf) {
+	if (db->buf) {
 		dma_free_coherent(chan->device->dev,
-			PL011_DMA_BUFFER_SIZE, sg->buf,
-			sg_dma_address(&sg->sg));
+				  PL011_DMA_BUFFER_SIZE, db->buf, db->dma);
 	}
 }
 
@@ -551,8 +545,8 @@ static void pl011_dma_tx_callback(void *
 
 	spin_lock_irqsave(&uap->port.lock, flags);
 	if (uap->dmatx.queued)
-		dma_unmap_sg(dmatx->chan->device->dev, &dmatx->sg, 1,
-			     DMA_TO_DEVICE);
+		dma_unmap_single(dmatx->chan->device->dev, dmatx->dma,
+				dmatx->len, DMA_TO_DEVICE);
 
 	dmacr = uap->dmacr;
 	uap->dmacr = dmacr & ~UART011_TXDMAE;
@@ -638,18 +632,19 @@ static int pl011_dma_tx_refill(struct ua
 			memcpy(&dmatx->buf[first], &xmit->buf[0], second);
 	}
 
-	dmatx->sg.length = count;
-
-	if (dma_map_sg(dma_dev->dev, &dmatx->sg, 1, DMA_TO_DEVICE) != 1) {
+	dmatx->len = count;
+	dmatx->dma = dma_map_single(dma_dev->dev, dmatx->buf, count,
+				    DMA_TO_DEVICE);
+	if (dmatx->dma == DMA_MAPPING_ERROR) {
 		uap->dmatx.queued = false;
 		dev_dbg(uap->port.dev, "unable to map TX DMA\n");
 		return -EBUSY;
 	}
 
-	desc = dmaengine_prep_slave_sg(chan, &dmatx->sg, 1, DMA_MEM_TO_DEV,
+	desc = dmaengine_prep_slave_single(chan, dmatx->dma, dmatx->len, DMA_MEM_TO_DEV,
 					     DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc) {
-		dma_unmap_sg(dma_dev->dev, &dmatx->sg, 1, DMA_TO_DEVICE);
+		dma_unmap_single(dma_dev->dev, dmatx->dma, dmatx->len, DMA_TO_DEVICE);
 		uap->dmatx.queued = false;
 		/*
 		 * If DMA cannot be used right now, we complete this
@@ -813,8 +808,8 @@ __acquires(&uap->port.lock)
 	dmaengine_terminate_async(uap->dmatx.chan);
 
 	if (uap->dmatx.queued) {
-		dma_unmap_sg(uap->dmatx.chan->device->dev, &uap->dmatx.sg, 1,
-			     DMA_TO_DEVICE);
+		dma_unmap_single(uap->dmatx.chan->device->dev, uap->dmatx.dma,
+				 uap->dmatx.len, DMA_TO_DEVICE);
 		uap->dmatx.queued = false;
 		uap->dmacr &= ~UART011_TXDMAE;
 		pl011_write(uap->dmacr, uap, REG_DMACR);
@@ -828,15 +823,15 @@ static int pl011_dma_rx_trigger_dma(stru
 	struct dma_chan *rxchan = uap->dmarx.chan;
 	struct pl011_dmarx_data *dmarx = &uap->dmarx;
 	struct dma_async_tx_descriptor *desc;
-	struct pl011_sgbuf *sgbuf;
+	struct pl011_dmabuf *dbuf;
 
 	if (!rxchan)
 		return -EIO;
 
 	/* Start the RX DMA job */
-	sgbuf = uap->dmarx.use_buf_b ?
-		&uap->dmarx.sgbuf_b : &uap->dmarx.sgbuf_a;
-	desc = dmaengine_prep_slave_sg(rxchan, &sgbuf->sg, 1,
+	dbuf = uap->dmarx.use_buf_b ?
+		&uap->dmarx.dbuf_b : &uap->dmarx.dbuf_a;
+	desc = dmaengine_prep_slave_single(rxchan, dbuf->dma, dbuf->len,
 					DMA_DEV_TO_MEM,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	/*
@@ -876,8 +871,8 @@ static void pl011_dma_rx_chars(struct ua
 			       bool readfifo)
 {
 	struct tty_port *port = &uap->port.state->port;
-	struct pl011_sgbuf *sgbuf = use_buf_b ?
-		&uap->dmarx.sgbuf_b : &uap->dmarx.sgbuf_a;
+	struct pl011_dmabuf *dbuf = use_buf_b ?
+		&uap->dmarx.dbuf_b : &uap->dmarx.dbuf_a;
 	int dma_count = 0;
 	u32 fifotaken = 0; /* only used for vdbg() */
 
@@ -886,7 +881,7 @@ static void pl011_dma_rx_chars(struct ua
 
 	if (uap->dmarx.poll_rate) {
 		/* The data can be taken by polling */
-		dmataken = sgbuf->sg.length - dmarx->last_residue;
+		dmataken = dbuf->len - dmarx->last_residue;
 		/* Recalculate the pending size */
 		if (pending >= dmataken)
 			pending -= dmataken;
@@ -900,7 +895,7 @@ static void pl011_dma_rx_chars(struct ua
 		 * Note that tty_insert_flip_buf() tries to take as many chars
 		 * as it can.
 		 */
-		dma_count = tty_insert_flip_string(port, sgbuf->buf + dmataken,
+		dma_count = tty_insert_flip_string(port, dbuf->buf + dmataken,
 				pending);
 
 		uap->port.icount.rx += dma_count;
@@ -911,7 +906,7 @@ static void pl011_dma_rx_chars(struct ua
 
 	/* Reset the last_residue for Rx DMA poll */
 	if (uap->dmarx.poll_rate)
-		dmarx->last_residue = sgbuf->sg.length;
+		dmarx->last_residue = dbuf->len;
 
 	/*
 	 * Only continue with trying to read the FIFO if all DMA chars have
@@ -946,8 +941,8 @@ static void pl011_dma_rx_irq(struct uart
 {
 	struct pl011_dmarx_data *dmarx = &uap->dmarx;
 	struct dma_chan *rxchan = dmarx->chan;
-	struct pl011_sgbuf *sgbuf = dmarx->use_buf_b ?
-		&dmarx->sgbuf_b : &dmarx->sgbuf_a;
+	struct pl011_dmabuf *dbuf = dmarx->use_buf_b ?
+		&dmarx->dbuf_b : &dmarx->dbuf_a;
 	size_t pending;
 	struct dma_tx_state state;
 	enum dma_status dmastat;
@@ -969,7 +964,7 @@ static void pl011_dma_rx_irq(struct uart
 	pl011_write(uap->dmacr, uap, REG_DMACR);
 	uap->dmarx.running = false;
 
-	pending = sgbuf->sg.length - state.residue;
+	pending = dbuf->len - state.residue;
 	BUG_ON(pending > PL011_DMA_BUFFER_SIZE);
 	/* Then we terminate the transfer - we now know our residue */
 	dmaengine_terminate_all(rxchan);
@@ -996,8 +991,8 @@ static void pl011_dma_rx_callback(void *
 	struct pl011_dmarx_data *dmarx = &uap->dmarx;
 	struct dma_chan *rxchan = dmarx->chan;
 	bool lastbuf = dmarx->use_buf_b;
-	struct pl011_sgbuf *sgbuf = dmarx->use_buf_b ?
-		&dmarx->sgbuf_b : &dmarx->sgbuf_a;
+	struct pl011_dmabuf *dbuf = dmarx->use_buf_b ?
+		&dmarx->dbuf_b : &dmarx->dbuf_a;
 	size_t pending;
 	struct dma_tx_state state;
 	int ret;
@@ -1015,7 +1010,7 @@ static void pl011_dma_rx_callback(void *
 	 * the DMA irq handler. So we check the residue here.
 	 */
 	rxchan->device->device_tx_status(rxchan, dmarx->cookie, &state);
-	pending = sgbuf->sg.length - state.residue;
+	pending = dbuf->len - state.residue;
 	BUG_ON(pending > PL011_DMA_BUFFER_SIZE);
 	/* Then we terminate the transfer - we now know our residue */
 	dmaengine_terminate_all(rxchan);
@@ -1067,16 +1062,16 @@ static void pl011_dma_rx_poll(struct tim
 	unsigned long flags;
 	unsigned int dmataken = 0;
 	unsigned int size = 0;
-	struct pl011_sgbuf *sgbuf;
+	struct pl011_dmabuf *dbuf;
 	int dma_count;
 	struct dma_tx_state state;
 
-	sgbuf = dmarx->use_buf_b ? &uap->dmarx.sgbuf_b : &uap->dmarx.sgbuf_a;
+	dbuf = dmarx->use_buf_b ? &uap->dmarx.dbuf_b : &uap->dmarx.dbuf_a;
 	rxchan->device->device_tx_status(rxchan, dmarx->cookie, &state);
 	if (likely(state.residue < dmarx->last_residue)) {
-		dmataken = sgbuf->sg.length - dmarx->last_residue;
+		dmataken = dbuf->len - dmarx->last_residue;
 		size = dmarx->last_residue - state.residue;
-		dma_count = tty_insert_flip_string(port, sgbuf->buf + dmataken,
+		dma_count = tty_insert_flip_string(port, dbuf->buf + dmataken,
 				size);
 		if (dma_count == size)
 			dmarx->last_residue =  state.residue;
@@ -1123,7 +1118,7 @@ static void pl011_dma_startup(struct uar
 		return;
 	}
 
-	sg_init_one(&uap->dmatx.sg, uap->dmatx.buf, PL011_DMA_BUFFER_SIZE);
+	uap->dmatx.len = PL011_DMA_BUFFER_SIZE;
 
 	/* The DMA buffer is now the FIFO the TTY subsystem can use */
 	uap->port.fifosize = PL011_DMA_BUFFER_SIZE;
@@ -1133,7 +1128,7 @@ static void pl011_dma_startup(struct uar
 		goto skip_rx;
 
 	/* Allocate and map DMA RX buffers */
-	ret = pl011_sgbuf_init(uap->dmarx.chan, &uap->dmarx.sgbuf_a,
+	ret = pl011_dmabuf_init(uap->dmarx.chan, &uap->dmarx.dbuf_a,
 			       DMA_FROM_DEVICE);
 	if (ret) {
 		dev_err(uap->port.dev, "failed to init DMA %s: %d\n",
@@ -1141,12 +1136,12 @@ static void pl011_dma_startup(struct uar
 		goto skip_rx;
 	}
 
-	ret = pl011_sgbuf_init(uap->dmarx.chan, &uap->dmarx.sgbuf_b,
+	ret = pl011_dmabuf_init(uap->dmarx.chan, &uap->dmarx.dbuf_b,
 			       DMA_FROM_DEVICE);
 	if (ret) {
 		dev_err(uap->port.dev, "failed to init DMA %s: %d\n",
 			"RX buffer B", ret);
-		pl011_sgbuf_free(uap->dmarx.chan, &uap->dmarx.sgbuf_a,
+		pl011_dmabuf_free(uap->dmarx.chan, &uap->dmarx.dbuf_a,
 				 DMA_FROM_DEVICE);
 		goto skip_rx;
 	}
@@ -1200,8 +1195,9 @@ static void pl011_dma_shutdown(struct ua
 		/* In theory, this should already be done by pl011_dma_flush_buffer */
 		dmaengine_terminate_all(uap->dmatx.chan);
 		if (uap->dmatx.queued) {
-			dma_unmap_sg(uap->dmatx.chan->device->dev, &uap->dmatx.sg, 1,
-				     DMA_TO_DEVICE);
+			dma_unmap_single(uap->dmatx.chan->device->dev,
+					 uap->dmatx.dma, uap->dmatx.len,
+					 DMA_TO_DEVICE);
 			uap->dmatx.queued = false;
 		}
 
@@ -1212,8 +1208,8 @@ static void pl011_dma_shutdown(struct ua
 	if (uap->using_rx_dma) {
 		dmaengine_terminate_all(uap->dmarx.chan);
 		/* Clean up the RX DMA */
-		pl011_sgbuf_free(uap->dmarx.chan, &uap->dmarx.sgbuf_a, DMA_FROM_DEVICE);
-		pl011_sgbuf_free(uap->dmarx.chan, &uap->dmarx.sgbuf_b, DMA_FROM_DEVICE);
+		pl011_dmabuf_free(uap->dmarx.chan, &uap->dmarx.dbuf_a, DMA_FROM_DEVICE);
+		pl011_dmabuf_free(uap->dmarx.chan, &uap->dmarx.dbuf_b, DMA_FROM_DEVICE);
 		if (uap->dmarx.poll_rate)
 			del_timer_sync(&uap->dmarx.timer);
 		uap->using_rx_dma = false;

[PATCH 6.1 174/194] serial: sc16is7xx: address RX timeout interrupt errata

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Mack <daniel@zonque.org>

commit 08ce9a1b72e38cf44c300a44ac5858533eb3c860 upstream.

This device has a silicon bug that makes it report a timeout interrupt
but no data in the FIFO.

The datasheet states the following in the errata section 18.1.4:

  "If the host reads the receive FIFO at the same time as a
  time-out interrupt condition happens, the host might read 0xCC
  (time-out) in the Interrupt Indication Register (IIR), but bit 0
  of the Line Status Register (LSR) is not set (means there is no
  data in the receive FIFO)."

The errata description seems to indicate it concerns only polled mode of
operation when reading bit 0 of the LSR register. However, tests have
shown and NXP has confirmed that the RXLVL register also yields 0 when
the bug is triggered, and hence the IRQ driven implementation in this
driver is equally affected.

This bug has hit us on production units and when it does, sc16is7xx_irq()
would spin forever because sc16is7xx_port_irq() keeps seeing an
interrupt in the IIR register that is not cleared because the driver
does not call into sc16is7xx_handle_rx() unless the RXLVL register
reports at least one byte in the FIFO.

Fix this by always reading one byte from the FIFO when this condition
is detected in order to clear the interrupt. This approach was
confirmed to be correct by NXP through their support channels.

Tested by: Hugo Villeneuve <hvilleneuve@dimonoff.com>

Signed-off-by: Daniel Mack <daniel@zonque.org>
Co-Developed-by: Maxim Popov <maxim.snafu@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231123072818.1394539-1-daniel@zonque.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/sc16is7xx.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -769,6 +769,18 @@ static bool sc16is7xx_port_irq(struct sc
 		case SC16IS7XX_IIR_RTOI_SRC:
 		case SC16IS7XX_IIR_XOFFI_SRC:
 			rxlen = sc16is7xx_port_read(port, SC16IS7XX_RXLVL_REG);
+
+			/*
+			 * There is a silicon bug that makes the chip report a
+			 * time-out interrupt but no data in the FIFO. This is
+			 * described in errata section 18.1.4.
+			 *
+			 * When this happens, read one byte from the FIFO to
+			 * clear the interrupt.
+			 */
+			if (iir == SC16IS7XX_IIR_RTOI_SRC && !rxlen)
+				rxlen = 1;
+
 			if (rxlen)
 				sc16is7xx_handle_rx(port, rxlen, iir);
 			break;

[PATCH 6.1 175/194] serial: 8250: 8250_omap: Clear UART_HAS_RHR_IT_DIS bit

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ronald Wahl <ronald.wahl@raritan.com>

commit 8973ab7a2441b286218f4a5c4c33680e2f139996 upstream.

This fixes commit 439c7183e5b9 ("serial: 8250: 8250_omap: Disable RX
interrupt after DMA enable") which unfortunately set the
UART_HAS_RHR_IT_DIS bit in the UART_OMAP_IER2 register and never
cleared it.

Cc: stable@vger.kernel.org
Fixes: 439c7183e5b9 ("serial: 8250: 8250_omap: Disable RX interrupt after DMA enable")
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20231031110909.11695-1-rwahl@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_omap.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -825,7 +825,7 @@ static void __dma_rx_do_complete(struct
 	if (priv->habit & UART_HAS_RHR_IT_DIS) {
 		reg = serial_in(p, UART_OMAP_IER2);
 		reg &= ~UART_OMAP_IER2_RHR_IT_DIS;
-		serial_out(p, UART_OMAP_IER2, UART_OMAP_IER2_RHR_IT_DIS);
+		serial_out(p, UART_OMAP_IER2, reg);
 	}
 
 	dmaengine_tx_status(rxchan, cookie, &state);
@@ -967,7 +967,7 @@ static int omap_8250_rx_dma(struct uart_
 	if (priv->habit & UART_HAS_RHR_IT_DIS) {
 		reg = serial_in(p, UART_OMAP_IER2);
 		reg |= UART_OMAP_IER2_RHR_IT_DIS;
-		serial_out(p, UART_OMAP_IER2, UART_OMAP_IER2_RHR_IT_DIS);
+		serial_out(p, UART_OMAP_IER2, reg);
 	}
 
 	dma_async_issue_pending(dma->rxchan);

[PATCH 6.1 176/194] serial: 8250: 8250_omap: Do not start RX DMA on THRI interrupt

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ronald Wahl <ronald.wahl@raritan.com>

commit c6bb057418876cdfdd29a6f7b8cef54539ee8811 upstream.

Starting RX DMA on THRI interrupt is too early because TX may not have
finished yet.

This change is inspired by commit 90b8596ac460 ("serial: 8250: Prevent
starting up DMA Rx on THRI interrupt") and fixes DMA issues I had with
an AM62 SoC that is using the 8250 OMAP variant.

Cc: stable@vger.kernel.org
Fixes: c26389f998a8 ("serial: 8250: 8250_omap: Add DMA support for UARTs on K3 SoCs")
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20231101171431.16495-1-rwahl@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_omap.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -1186,10 +1186,12 @@ static int omap_8250_dma_handle_irq(stru
 
 	status = serial_port_in(port, UART_LSR);
 
-	if (priv->habit & UART_HAS_EFR2)
-		am654_8250_handle_rx_dma(up, iir, status);
-	else
-		status = omap_8250_handle_rx_dma(up, iir, status);
+	if ((iir & 0x3f) != UART_IIR_THRI) {
+		if (priv->habit & UART_HAS_EFR2)
+			am654_8250_handle_rx_dma(up, iir, status);
+		else
+			status = omap_8250_handle_rx_dma(up, iir, status);
+	}
 
 	serial8250_modem_status(up);
 	if (status & UART_LSR_THRE && up->dma->tx_err) {

[PATCH 6.1 177/194] serial: 8250_omap: Add earlycon support for the AM654 UART controller

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ronald Wahl <ronald.wahl@raritan.com>

commit 8e42c301ce64e0dcca547626eb486877d502d336 upstream.

Currently there is no support for earlycon on the AM654 UART
controller. This commit adds it.

Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20231031131242.15516-1-rwahl@gmx.de
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_early.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -197,6 +197,7 @@ static int __init early_omap8250_setup(s
 OF_EARLYCON_DECLARE(omap8250, "ti,omap2-uart", early_omap8250_setup);
 OF_EARLYCON_DECLARE(omap8250, "ti,omap3-uart", early_omap8250_setup);
 OF_EARLYCON_DECLARE(omap8250, "ti,omap4-uart", early_omap8250_setup);
+OF_EARLYCON_DECLARE(omap8250, "ti,am654-uart", early_omap8250_setup);
 
 #endif
 

[PATCH 6.1 178/194] devcoredump: Send uevent once devcd is ready

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mukesh Ojha <quic_mojha@quicinc.com>

commit af54d778a03853801d681c98c0c2a6c316ef9ca7 upstream.

dev_coredumpm() creates a devcoredump device and adds it
to the core kernel framework which eventually end up
sending uevent to the user space and later creates a
symbolic link to the failed device. An application
running in userspace may be interested in this symbolic
link to get the name of the failed device.

In a issue scenario, once uevent sent to the user space
it start reading '/sys/class/devcoredump/devcdX/failing_device'
to get the actual name of the device which might not been
created and it is in its path of creation.

To fix this, suppress sending uevent till the failing device
symbolic link gets created and send uevent once symbolic
link is created successfully.

Fixes: 833c95456a70 ("device coredump: add new device coredump class")
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1700232572-25823-1-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/base/devcoredump.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/base/devcoredump.c
+++ b/drivers/base/devcoredump.c
@@ -363,6 +363,7 @@ void dev_coredumpm(struct device *dev, s
 	devcd->devcd_dev.class = &devcd_class;
 
 	mutex_lock(&devcd->mutex);
+	dev_set_uevent_suppress(&devcd->devcd_dev, true);
 	if (device_add(&devcd->devcd_dev))
 		goto put_device;
 
@@ -377,6 +378,8 @@ void dev_coredumpm(struct device *dev, s
 		              "devcoredump"))
 		dev_warn(dev, "devcoredump create_link failed\n");
 
+	dev_set_uevent_suppress(&devcd->devcd_dev, false);
+	kobject_uevent(&devcd->devcd_dev.kobj, KOBJ_ADD);
 	INIT_DELAYED_WORK(&devcd->del_wk, devcd_del);
 	schedule_delayed_work(&devcd->del_wk, DEVCD_TIMEOUT);
 	mutex_unlock(&devcd->mutex);

[PATCH 6.1 179/194] x86/CPU/AMD: Check vendor in the AMD microcode callback

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Borislav Petkov (AMD) <bp@alien8.de>

commit 9b8493dc43044376716d789d07699f17d538a7c4 upstream.

Commit in Fixes added an AMD-specific microcode callback. However, it
didn't check the CPU vendor the kernel runs on explicitly.

The only reason the Zenbleed check in it didn't run on other x86 vendors
hardware was pure coincidental luck:

  if (!cpu_has_amd_erratum(c, amd_zenbleed))
	  return;

gives true on other vendors because they don't have those families and
models.

However, with the removal of the cpu_has_amd_erratum() in

  05f5f73936fa ("x86/CPU/AMD: Drop now unused CPU erratum checking function")

that coincidental condition is gone, leading to the zenbleed check
getting executed on other vendors too.

Add the explicit vendor check for the whole callback as it should've
been done in the first place.

Fixes: 522b1d69219d ("x86/cpu/amd: Add a Zenbleed fix")
Cc: <stable@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231201184226.16749-1-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/cpu/amd.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -1291,6 +1291,9 @@ static void zenbleed_check_cpu(void *unu
 
 void amd_check_microcode(void)
 {
+	if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD)
+		return;
+
 	on_each_cpu(zenbleed_check_cpu, NULL, 1);
 }
 

[PATCH 6.1 180/194] USB: gadget: core: adjust uevent timing on gadget unbind

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Roy Luo <royluo@google.com>

commit 73ea73affe8622bdf292de898da869d441da6a9d upstream.

The KOBJ_CHANGE uevent is sent before gadget unbind is actually
executed, resulting in inaccurate uevent emitted at incorrect timing
(the uevent would have USB_UDC_DRIVER variable set while it would
soon be removed).
Move the KOBJ_CHANGE uevent to the end of the unbind function so that
uevent is sent only after the change has been made.

Fixes: 2ccea03a8f7e ("usb: gadget: introduce UDC Class")
Cc: stable@vger.kernel.org
Signed-off-by: Roy Luo <royluo@google.com>
Link: https://lore.kernel.org/r/20231128221756.2591158-1-royluo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/udc/core.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -1608,8 +1608,6 @@ static void gadget_unbind_driver(struct
 
 	dev_dbg(&udc->dev, "unbinding gadget driver [%s]\n", driver->function);
 
-	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
-
 	udc->allow_connect = false;
 	cancel_work_sync(&udc->vbus_work);
 	mutex_lock(&udc->connect_lock);
@@ -1629,6 +1627,8 @@ static void gadget_unbind_driver(struct
 	driver->is_bound = false;
 	udc->driver = NULL;
 	mutex_unlock(&udc_lock);
+
+	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
 }
 
 /* ------------------------------------------------------------------------- */

[PATCH 6.1 181/194] cifs: Fix flushing, invalidation and file size with copy_file_range()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Howells <dhowells@redhat.com>

commit 7b2404a886f8b91250c31855d287e632123e1746 upstream.

Fix a number of issues in the cifs filesystem implementation of the
copy_file_range() syscall in cifs_file_copychunk_range().

Firstly, the invalidation of the destination range is handled incorrectly:
We shouldn't just invalidate the whole file as dirty data in the file may
get lost and we can't just call truncate_inode_pages_range() to invalidate
the destination range as that will erase parts of a partial folio at each
end whilst invalidating and discarding all the folios in the middle.  We
need to force all the folios covering the range to be reloaded, but we
mustn't lose dirty data in them that's not in the destination range.

Further, we shouldn't simply round out the range to PAGE_SIZE at each end
as cifs should move to support multipage folios.

Secondly, there's an issue whereby a write may have extended the file
locally, but not have been written back yet.  This can leaves the local
idea of the EOF at a later point than the server's EOF.  If a copy request
is issued, this will fail on the server with STATUS_INVALID_VIEW_SIZE
(which gets translated to -EIO locally) if the copy source extends past the
server's EOF.

Fix this by:

 (0) Flush the source region (already done).  The flush does nothing and
     the EOF isn't moved if the source region has no dirty data.

 (1) Move the EOF to the end of the source region if it isn't already at
     least at this point.  If we can't do this, for instance if the server
     doesn't support it, just flush the entire source file.

 (2) Find the folio (if present) at each end of the range, flushing it and
     increasing the region-to-be-invalidated to cover those in their
     entirety.

 (3) Fully discard all the folios covering the range as we want them to be
     reloaded.

 (4) Then perform the copy.

Thirdly, set i_size after doing the copychunk_range operation as this value
may be used by various things internally.  stat() hides the issue because
setting ->time to 0 causes cifs_getatr() to revalidate the attributes.

These were causing the generic/075 xfstest to fail.

Fixes: 620d8745b35d ("Introduce cifs_copy_file_range()")
Cc: stable@vger.kernel.org
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/smb/client/cifsfs.c |  102 +++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 99 insertions(+), 3 deletions(-)

--- a/fs/smb/client/cifsfs.c
+++ b/fs/smb/client/cifsfs.c
@@ -1191,6 +1191,72 @@ const struct inode_operations cifs_symli
 	.listxattr = cifs_listxattr,
 };
 
+/*
+ * Advance the EOF marker to after the source range.
+ */
+static int cifs_precopy_set_eof(struct inode *src_inode, struct cifsInodeInfo *src_cifsi,
+				struct cifs_tcon *src_tcon,
+				unsigned int xid, loff_t src_end)
+{
+	struct cifsFileInfo *writeable_srcfile;
+	int rc = -EINVAL;
+
+	writeable_srcfile = find_writable_file(src_cifsi, FIND_WR_FSUID_ONLY);
+	if (writeable_srcfile) {
+		if (src_tcon->ses->server->ops->set_file_size)
+			rc = src_tcon->ses->server->ops->set_file_size(
+				xid, src_tcon, writeable_srcfile,
+				src_inode->i_size, true /* no need to set sparse */);
+		else
+			rc = -ENOSYS;
+		cifsFileInfo_put(writeable_srcfile);
+		cifs_dbg(FYI, "SetFSize for copychunk rc = %d\n", rc);
+	}
+
+	if (rc < 0)
+		goto set_failed;
+
+	netfs_resize_file(&src_cifsi->netfs, src_end);
+	fscache_resize_cookie(cifs_inode_cookie(src_inode), src_end);
+	return 0;
+
+set_failed:
+	return filemap_write_and_wait(src_inode->i_mapping);
+}
+
+/*
+ * Flush out either the folio that overlaps the beginning of a range in which
+ * pos resides or the folio that overlaps the end of a range unless that folio
+ * is entirely within the range we're going to invalidate.  We extend the flush
+ * bounds to encompass the folio.
+ */
+static int cifs_flush_folio(struct inode *inode, loff_t pos, loff_t *_fstart, loff_t *_fend,
+			    bool first)
+{
+	struct folio *folio;
+	unsigned long long fpos, fend;
+	pgoff_t index = pos / PAGE_SIZE;
+	size_t size;
+	int rc = 0;
+
+	folio = filemap_get_folio(inode->i_mapping, index);
+	if (IS_ERR(folio))
+		return 0;
+
+	size = folio_size(folio);
+	fpos = folio_pos(folio);
+	fend = fpos + size - 1;
+	*_fstart = min_t(unsigned long long, *_fstart, fpos);
+	*_fend   = max_t(unsigned long long, *_fend, fend);
+	if ((first && pos == fpos) || (!first && pos == fend))
+		goto out;
+
+	rc = filemap_write_and_wait_range(inode->i_mapping, fpos, fend);
+out:
+	folio_put(folio);
+	return rc;
+}
+
 static loff_t cifs_remap_file_range(struct file *src_file, loff_t off,
 		struct file *dst_file, loff_t destoff, loff_t len,
 		unsigned int remap_flags)
@@ -1260,10 +1326,12 @@ ssize_t cifs_file_copychunk_range(unsign
 {
 	struct inode *src_inode = file_inode(src_file);
 	struct inode *target_inode = file_inode(dst_file);
+	struct cifsInodeInfo *src_cifsi = CIFS_I(src_inode);
 	struct cifsFileInfo *smb_file_src;
 	struct cifsFileInfo *smb_file_target;
 	struct cifs_tcon *src_tcon;
 	struct cifs_tcon *target_tcon;
+	unsigned long long destend, fstart, fend;
 	ssize_t rc;
 
 	cifs_dbg(FYI, "copychunk range\n");
@@ -1303,13 +1371,41 @@ ssize_t cifs_file_copychunk_range(unsign
 	if (rc)
 		goto unlock;
 
-	/* should we flush first and last page first */
-	truncate_inode_pages(&target_inode->i_data, 0);
+	/* The server-side copy will fail if the source crosses the EOF marker.
+	 * Advance the EOF marker after the flush above to the end of the range
+	 * if it's short of that.
+	 */
+	if (src_cifsi->server_eof < off + len) {
+		rc = cifs_precopy_set_eof(src_inode, src_cifsi, src_tcon, xid, off + len);
+		if (rc < 0)
+			goto unlock;
+	}
+
+	destend = destoff + len - 1;
+
+	/* Flush the folios at either end of the destination range to prevent
+	 * accidental loss of dirty data outside of the range.
+	 */
+	fstart = destoff;
+	fend = destend;
+
+	rc = cifs_flush_folio(target_inode, destoff, &fstart, &fend, true);
+	if (rc)
+		goto unlock;
+	rc = cifs_flush_folio(target_inode, destend, &fstart, &fend, false);
+	if (rc)
+		goto unlock;
+
+	/* Discard all the folios that overlap the destination region. */
+	truncate_inode_pages_range(&target_inode->i_data, fstart, fend);
 
 	rc = file_modified(dst_file);
-	if (!rc)
+	if (!rc) {
 		rc = target_tcon->ses->server->ops->copychunk_range(xid,
 			smb_file_src, smb_file_target, off, len, destoff);
+		if (rc > 0 && destoff + rc > i_size_read(target_inode))
+			truncate_setsize(target_inode, destoff + rc);
+	}
 
 	file_accessed(src_file);
 

[PATCH 6.1 182/194] cifs: Fix flushing, invalidation and file size with FICLONE

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Howells <dhowells@redhat.com>

commit c54fc3a4f375663f2361a9cbb2955fb4ef912879 upstream.

Fix a number of issues in the cifs filesystem implementation of the FICLONE
ioctl in cifs_remap_file_range().  This is analogous to the previously
fixed bug in cifs_file_copychunk_range() and can share the helper
functions.

Firstly, the invalidation of the destination range is handled incorrectly:
We shouldn't just invalidate the whole file as dirty data in the file may
get lost and we can't just call truncate_inode_pages_range() to invalidate
the destination range as that will erase parts of a partial folio at each
end whilst invalidating and discarding all the folios in the middle.  We
need to force all the folios covering the range to be reloaded, but we
mustn't lose dirty data in them that's not in the destination range.

Further, we shouldn't simply round out the range to PAGE_SIZE at each end
as cifs should move to support multipage folios.

Secondly, there's an issue whereby a write may have extended the file
locally, but not have been written back yet.  This can leaves the local
idea of the EOF at a later point than the server's EOF.  If a clone request
is issued, this will fail on the server with STATUS_INVALID_VIEW_SIZE
(which gets translated to -EIO locally) if the clone source extends past
the server's EOF.

Fix this by:

 (0) Flush the source region (already done).  The flush does nothing and
     the EOF isn't moved if the source region has no dirty data.

 (1) Move the EOF to the end of the source region if it isn't already at
     least at this point.  If we can't do this, for instance if the server
     doesn't support it, just flush the entire source file.

 (2) Find the folio (if present) at each end of the range, flushing it and
     increasing the region-to-be-invalidated to cover those in their
     entirety.

 (3) Fully discard all the folios covering the range as we want them to be
     reloaded.

 (4) Then perform the extent duplication.

Thirdly, set i_size after doing the duplicate_extents operation as this
value may be used by various things internally.  stat() hides the issue
because setting ->time to 0 causes cifs_getatr() to revalidate the
attributes.

These were causing the cifs/001 xfstest to fail.

Fixes: 04b38d601239 ("vfs: pull btrfs clone API to vfs layer")
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: stable@vger.kernel.org
cc: Christoph Hellwig <hch@lst.de>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/smb/client/cifsfs.c |   68 +++++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 57 insertions(+), 11 deletions(-)

--- a/fs/smb/client/cifsfs.c
+++ b/fs/smb/client/cifsfs.c
@@ -1263,9 +1263,12 @@ static loff_t cifs_remap_file_range(stru
 {
 	struct inode *src_inode = file_inode(src_file);
 	struct inode *target_inode = file_inode(dst_file);
+	struct cifsInodeInfo *src_cifsi = CIFS_I(src_inode);
+	struct cifsInodeInfo *target_cifsi = CIFS_I(target_inode);
 	struct cifsFileInfo *smb_file_src = src_file->private_data;
-	struct cifsFileInfo *smb_file_target;
-	struct cifs_tcon *target_tcon;
+	struct cifsFileInfo *smb_file_target = dst_file->private_data;
+	struct cifs_tcon *target_tcon, *src_tcon;
+	unsigned long long destend, fstart, fend, new_size;
 	unsigned int xid;
 	int rc;
 
@@ -1278,13 +1281,13 @@ static loff_t cifs_remap_file_range(stru
 
 	xid = get_xid();
 
-	if (!src_file->private_data || !dst_file->private_data) {
+	if (!smb_file_src || !smb_file_target) {
 		rc = -EBADF;
 		cifs_dbg(VFS, "missing cifsFileInfo on copy range src file\n");
 		goto out;
 	}
 
-	smb_file_target = dst_file->private_data;
+	src_tcon = tlink_tcon(smb_file_src->tlink);
 	target_tcon = tlink_tcon(smb_file_target->tlink);
 
 	/*
@@ -1297,20 +1300,63 @@ static loff_t cifs_remap_file_range(stru
 	if (len == 0)
 		len = src_inode->i_size - off;
 
-	cifs_dbg(FYI, "about to flush pages\n");
-	/* should we flush first and last page first */
-	truncate_inode_pages_range(&target_inode->i_data, destoff,
-				   PAGE_ALIGN(destoff + len)-1);
+	cifs_dbg(FYI, "clone range\n");
+
+	/* Flush the source buffer */
+	rc = filemap_write_and_wait_range(src_inode->i_mapping, off,
+					  off + len - 1);
+	if (rc)
+		goto unlock;
+
+	/* The server-side copy will fail if the source crosses the EOF marker.
+	 * Advance the EOF marker after the flush above to the end of the range
+	 * if it's short of that.
+	 */
+	if (src_cifsi->netfs.remote_i_size < off + len) {
+		rc = cifs_precopy_set_eof(src_inode, src_cifsi, src_tcon, xid, off + len);
+		if (rc < 0)
+			goto unlock;
+	}
+
+	new_size = destoff + len;
+	destend = destoff + len - 1;
 
-	if (target_tcon->ses->server->ops->duplicate_extents)
+	/* Flush the folios at either end of the destination range to prevent
+	 * accidental loss of dirty data outside of the range.
+	 */
+	fstart = destoff;
+	fend = destend;
+
+	rc = cifs_flush_folio(target_inode, destoff, &fstart, &fend, true);
+	if (rc)
+		goto unlock;
+	rc = cifs_flush_folio(target_inode, destend, &fstart, &fend, false);
+	if (rc)
+		goto unlock;
+
+	/* Discard all the folios that overlap the destination region. */
+	cifs_dbg(FYI, "about to discard pages %llx-%llx\n", fstart, fend);
+	truncate_inode_pages_range(&target_inode->i_data, fstart, fend);
+
+	fscache_invalidate(cifs_inode_cookie(target_inode), NULL,
+			   i_size_read(target_inode), 0);
+
+	rc = -EOPNOTSUPP;
+	if (target_tcon->ses->server->ops->duplicate_extents) {
 		rc = target_tcon->ses->server->ops->duplicate_extents(xid,
 			smb_file_src, smb_file_target, off, len, destoff);
-	else
-		rc = -EOPNOTSUPP;
+		if (rc == 0 && new_size > i_size_read(target_inode)) {
+			truncate_setsize(target_inode, new_size);
+			netfs_resize_file(&target_cifsi->netfs, new_size);
+			fscache_resize_cookie(cifs_inode_cookie(target_inode),
+					      new_size);
+		}
+	}
 
 	/* force revalidate of size and timestamps of target file now
 	   that target is updated on the server */
 	CIFS_I(target_inode)->time = 0;
+unlock:
 	/* although unlocking in the reverse order from locking is not
 	   strictly necessary here it is a little cleaner to be consistent */
 	unlock_two_nondirectories(src_inode, target_inode);

[PATCH 6.1 183/194] MIPS: kernel: Clear FPU states when setting up kernel threads

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

commit a58a173444a68412bb08849bd81c679395f20ca0 upstream.

io_uring sets up the io worker kernel thread via a syscall out of an
user space prrocess. This process might have used FPU and since
copy_thread() didn't clear FPU states for kernel threads a BUG()
is triggered for using FPU inside kernel. Move code around
to always clear FPU state for user and kernel threads.

Cc: stable@vger.kernel.org
Reported-by: Aurelien Jarno <aurel32@debian.org>
Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1055021
Suggested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/mips/kernel/process.c |   25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)

--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -121,6 +121,19 @@ int copy_thread(struct task_struct *p, c
 	/*  Put the stack after the struct pt_regs.  */
 	childksp = (unsigned long) childregs;
 	p->thread.cp0_status = (read_c0_status() & ~(ST0_CU2|ST0_CU1)) | ST0_KERNEL_CUMASK;
+
+	/*
+	 * New tasks lose permission to use the fpu. This accelerates context
+	 * switching for most programs since they don't use the fpu.
+	 */
+	clear_tsk_thread_flag(p, TIF_USEDFPU);
+	clear_tsk_thread_flag(p, TIF_USEDMSA);
+	clear_tsk_thread_flag(p, TIF_MSA_CTX_LIVE);
+
+#ifdef CONFIG_MIPS_MT_FPAFF
+	clear_tsk_thread_flag(p, TIF_FPUBOUND);
+#endif /* CONFIG_MIPS_MT_FPAFF */
+
 	if (unlikely(args->fn)) {
 		/* kernel thread */
 		unsigned long status = p->thread.cp0_status;
@@ -149,20 +162,8 @@ int copy_thread(struct task_struct *p, c
 	p->thread.reg29 = (unsigned long) childregs;
 	p->thread.reg31 = (unsigned long) ret_from_fork;
 
-	/*
-	 * New tasks lose permission to use the fpu. This accelerates context
-	 * switching for most programs since they don't use the fpu.
-	 */
 	childregs->cp0_status &= ~(ST0_CU2|ST0_CU1);
 
-	clear_tsk_thread_flag(p, TIF_USEDFPU);
-	clear_tsk_thread_flag(p, TIF_USEDMSA);
-	clear_tsk_thread_flag(p, TIF_MSA_CTX_LIVE);
-
-#ifdef CONFIG_MIPS_MT_FPAFF
-	clear_tsk_thread_flag(p, TIF_FPUBOUND);
-#endif /* CONFIG_MIPS_MT_FPAFF */
-
 #ifdef CONFIG_MIPS_FP_SUPPORT
 	atomic_set(&p->thread.bd_emu_frame, BD_EMUFRAME_NONE);
 #endif

[PATCH 6.1 184/194] KVM: s390/mm: Properly reset no-dat

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Claudio Imbrenda <imbrenda@linux.ibm.com>

commit 27072b8e18a73ffeffb1c140939023915a35134b upstream.

When the CMMA state needs to be reset, the no-dat bit also needs to be
reset. Failure to do so could cause issues in the guest, since the
guest expects the bit to be cleared after a reset.

Cc: <stable@vger.kernel.org>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Message-ID: <20231109123624.37314-1-imbrenda@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/s390/mm/pgtable.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -731,7 +731,7 @@ void ptep_zap_unused(struct mm_struct *m
 		pte_clear(mm, addr, ptep);
 	}
 	if (reset)
-		pgste_val(pgste) &= ~_PGSTE_GPS_USAGE_MASK;
+		pgste_val(pgste) &= ~(_PGSTE_GPS_USAGE_MASK | _PGSTE_GPS_NODAT);
 	pgste_set_unlock(ptep, pgste);
 	preempt_enable();
 }

[PATCH 6.1 185/194] KVM: SVM: Update EFER software model on CR0 trap for SEV-ES

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sean Christopherson <seanjc@google.com>

commit 4cdf351d3630a640ab6a05721ef055b9df62277f upstream.

In general, activating long mode involves setting the EFER_LME bit in
the EFER register and then enabling the X86_CR0_PG bit in the CR0
register. At this point, the EFER_LMA bit will be set automatically by
hardware.

In the case of SVM/SEV guests where writes to CR0 are intercepted, it's
necessary for the host to set EFER_LMA on behalf of the guest since
hardware does not see the actual CR0 write.

In the case of SEV-ES guests where writes to CR0 are trapped instead of
intercepted, the hardware *does* see/record the write to CR0 before
exiting and passing the value on to the host, so as part of enabling
SEV-ES support commit f1c6366e3043 ("KVM: SVM: Add required changes to
support intercepts under SEV-ES") dropped special handling of the
EFER_LMA bit with the understanding that it would be set automatically.

However, since the guest never explicitly sets the EFER_LMA bit, the
host never becomes aware that it has been set. This becomes problematic
when userspace tries to get/set the EFER values via
KVM_GET_SREGS/KVM_SET_SREGS, since the EFER contents tracked by the host
will be missing the EFER_LMA bit, and when userspace attempts to pass
the EFER value back via KVM_SET_SREGS it will fail a sanity check that
asserts that EFER_LMA should always be set when X86_CR0_PG and EFER_LME
are set.

Fix this by always inferring the value of EFER_LMA based on X86_CR0_PG
and EFER_LME, regardless of whether or not SEV-ES is enabled.

Fixes: f1c6366e3043 ("KVM: SVM: Add required changes to support intercepts under SEV-ES")
Reported-by: Peter Gonda <pgonda@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210507165947.2502412-2-seanjc@google.com>
[A two year old patch that was revived after we noticed the failure in
 KVM_SET_SREGS and a similar patch was posted by Michael Roth.  This is
 Sean's patch, but with Michael's more complete commit message. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kvm/svm/svm.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -1786,15 +1786,17 @@ void svm_set_cr0(struct kvm_vcpu *vcpu,
 	bool old_paging = is_paging(vcpu);
 
 #ifdef CONFIG_X86_64
-	if (vcpu->arch.efer & EFER_LME && !vcpu->arch.guest_state_protected) {
+	if (vcpu->arch.efer & EFER_LME) {
 		if (!is_paging(vcpu) && (cr0 & X86_CR0_PG)) {
 			vcpu->arch.efer |= EFER_LMA;
-			svm->vmcb->save.efer |= EFER_LMA | EFER_LME;
+			if (!vcpu->arch.guest_state_protected)
+				svm->vmcb->save.efer |= EFER_LMA | EFER_LME;
 		}
 
 		if (is_paging(vcpu) && !(cr0 & X86_CR0_PG)) {
 			vcpu->arch.efer &= ~EFER_LMA;
-			svm->vmcb->save.efer &= ~(EFER_LMA | EFER_LME);
+			if (!vcpu->arch.guest_state_protected)
+				svm->vmcb->save.efer &= ~(EFER_LMA | EFER_LME);
 		}
 	}
 #endif

[PATCH 6.1 186/194] MIPS: Loongson64: Reserve vgabios memory on boot

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiaxun Yang <jiaxun.yang@flygoat.com>

commit 8f7aa77a463f47c9e00592d02747a9fcf2271543 upstream.

vgabios is passed from firmware to kernel on Loongson64 systems.
Sane firmware will keep this pointer in reserved memory space
passed from the firmware but insane firmware keeps it in low
memory before kernel entry that is not reserved.

Previously kernel won't try to allocate memory from low memory
before kernel entry on boot, but after converting to memblock
it will do that.

Fix by resversing those memory on early boot.

Cc: stable@vger.kernel.org
Fixes: a94e4f24ec83 ("MIPS: init: Drop boot_mem_map")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/mips/loongson64/init.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/arch/mips/loongson64/init.c
+++ b/arch/mips/loongson64/init.c
@@ -88,6 +88,11 @@ void __init szmem(unsigned int node)
 			break;
 		}
 	}
+
+	/* Reserve vgabios if it comes from firmware */
+	if (loongson_sysconf.vgabios_addr)
+		memblock_reserve(virt_to_phys((void *)loongson_sysconf.vgabios_addr),
+				SZ_256K);
 }
 
 #ifndef CONFIG_NUMA

[PATCH 6.1 187/194] MIPS: Loongson64: Handle more memory types passed from firmware

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiaxun Yang <jiaxun.yang@flygoat.com>

commit c7206e7bd214ebb3ca6fa474a4423662327d9beb upstream.

There are many types of revsered memory passed from firmware
that should be reserved in memblock, and UMA memory passed
from firmware that should be added to system memory for system
to use.

Also for memblock there is no need to align those space into page,
which actually cause problems.

Handle them properly to prevent memory corruption on some systems.

Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/mips/include/asm/mach-loongson64/boot_param.h |    6 ++-
 arch/mips/loongson64/init.c                        |   42 +++++++++++++--------
 2 files changed, 31 insertions(+), 17 deletions(-)

--- a/arch/mips/include/asm/mach-loongson64/boot_param.h
+++ b/arch/mips/include/asm/mach-loongson64/boot_param.h
@@ -14,7 +14,11 @@
 #define ADAPTER_ROM		8
 #define ACPI_TABLE		9
 #define SMBIOS_TABLE		10
-#define MAX_MEMORY_TYPE		11
+#define UMA_VIDEO_RAM		11
+#define VUMA_VIDEO_RAM		12
+#define MAX_MEMORY_TYPE		13
+
+#define MEM_SIZE_IS_IN_BYTES	(1 << 31)
 
 #define LOONGSON3_BOOT_MEM_MAP_MAX 128
 struct efi_memory_map_loongson {
--- a/arch/mips/loongson64/init.c
+++ b/arch/mips/loongson64/init.c
@@ -49,8 +49,7 @@ void virtual_early_config(void)
 void __init szmem(unsigned int node)
 {
 	u32 i, mem_type;
-	static unsigned long num_physpages;
-	u64 node_id, node_psize, start_pfn, end_pfn, mem_start, mem_size;
+	phys_addr_t node_id, mem_start, mem_size;
 
 	/* Otherwise come from DTB */
 	if (loongson_sysconf.fw_interface != LOONGSON_LEFI)
@@ -64,27 +63,38 @@ void __init szmem(unsigned int node)
 
 		mem_type = loongson_memmap->map[i].mem_type;
 		mem_size = loongson_memmap->map[i].mem_size;
-		mem_start = loongson_memmap->map[i].mem_start;
+
+		/* Memory size comes in MB if MEM_SIZE_IS_IN_BYTES not set */
+		if (mem_size & MEM_SIZE_IS_IN_BYTES)
+			mem_size &= ~MEM_SIZE_IS_IN_BYTES;
+		else
+			mem_size = mem_size << 20;
+
+		mem_start = (node_id << 44) | loongson_memmap->map[i].mem_start;
 
 		switch (mem_type) {
 		case SYSTEM_RAM_LOW:
 		case SYSTEM_RAM_HIGH:
-			start_pfn = ((node_id << 44) + mem_start) >> PAGE_SHIFT;
-			node_psize = (mem_size << 20) >> PAGE_SHIFT;
-			end_pfn  = start_pfn + node_psize;
-			num_physpages += node_psize;
-			pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n",
-				(u32)node_id, mem_type, mem_start, mem_size);
-			pr_info("       start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n",
-				start_pfn, end_pfn, num_physpages);
-			memblock_add_node(PFN_PHYS(start_pfn),
-					  PFN_PHYS(node_psize), node,
+		case UMA_VIDEO_RAM:
+			pr_info("Node %d, mem_type:%d\t[%pa], %pa bytes usable\n",
+				(u32)node_id, mem_type, &mem_start, &mem_size);
+			memblock_add_node(mem_start, mem_size, node,
 					  MEMBLOCK_NONE);
 			break;
 		case SYSTEM_RAM_RESERVED:
-			pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n",
-				(u32)node_id, mem_type, mem_start, mem_size);
-			memblock_reserve(((node_id << 44) + mem_start), mem_size << 20);
+		case VIDEO_ROM:
+		case ADAPTER_ROM:
+		case ACPI_TABLE:
+		case SMBIOS_TABLE:
+			pr_info("Node %d, mem_type:%d\t[%pa], %pa bytes reserved\n",
+				(u32)node_id, mem_type, &mem_start, &mem_size);
+			memblock_reserve(mem_start, mem_size);
+			break;
+		/* We should not reserve VUMA_VIDEO_RAM as it overlaps with MMIO */
+		case VUMA_VIDEO_RAM:
+		default:
+			pr_info("Node %d, mem_type:%d\t[%pa], %pa bytes unhandled\n",
+				(u32)node_id, mem_type, &mem_start, &mem_size);
 			break;
 		}
 	}

[PATCH 6.1 188/194] MIPS: Loongson64: Enable DMA noncoherent support

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiaxun Yang <jiaxun.yang@flygoat.com>

commit edc0378eee00200a5bedf1bb9f00ad390e0d1bd4 upstream.

There are some Loongson64 systems come with broken coherent DMA
support, firmware will set a bit in boot_param and pass nocoherentio
in cmdline.

However nonconherent support was missed out when spin off Loongson-2EF
form Loongson64, and that boot_param change never made itself into
upstream.

Support DMA noncoherent properly to get those systems working.

Cc: stable@vger.kernel.org
Fixes: 71e2f4dd5a65 ("MIPS: Fork loongson2ef from loongson64")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/mips/Kconfig                                  |    2 ++
 arch/mips/include/asm/mach-loongson64/boot_param.h |    3 ++-
 arch/mips/loongson64/env.c                         |   10 +++++++++-
 3 files changed, 13 insertions(+), 2 deletions(-)

--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -483,6 +483,7 @@ config MACH_LOONGSON2EF
 
 config MACH_LOONGSON64
 	bool "Loongson 64-bit family of machines"
+	select ARCH_DMA_DEFAULT_COHERENT
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_MIGHT_HAVE_PC_SERIO
@@ -1304,6 +1305,7 @@ config CPU_LOONGSON64
 	select CPU_SUPPORTS_MSA
 	select CPU_DIEI_BROKEN if !LOONGSON3_ENHANCEMENT
 	select CPU_MIPSR2_IRQ_VI
+	select DMA_NONCOHERENT
 	select WEAK_ORDERING
 	select WEAK_REORDERING_BEYOND_LLSC
 	select MIPS_ASID_BITS_VARIABLE
--- a/arch/mips/include/asm/mach-loongson64/boot_param.h
+++ b/arch/mips/include/asm/mach-loongson64/boot_param.h
@@ -121,7 +121,8 @@ struct irq_source_routing_table {
 	u64 pci_io_start_addr;
 	u64 pci_io_end_addr;
 	u64 pci_config_addr;
-	u32 dma_mask_bits;
+	u16 dma_mask_bits;
+	u16 dma_noncoherent;
 } __packed;
 
 struct interface_info {
--- a/arch/mips/loongson64/env.c
+++ b/arch/mips/loongson64/env.c
@@ -13,6 +13,8 @@
  * Copyright (C) 2009 Lemote Inc.
  * Author: Wu Zhangjin, wuzhangjin@gmail.com
  */
+
+#include <linux/dma-map-ops.h>
 #include <linux/export.h>
 #include <linux/pci_ids.h>
 #include <asm/bootinfo.h>
@@ -147,8 +149,14 @@ void __init prom_lefi_init_env(void)
 
 	loongson_sysconf.dma_mask_bits = eirq_source->dma_mask_bits;
 	if (loongson_sysconf.dma_mask_bits < 32 ||
-		loongson_sysconf.dma_mask_bits > 64)
+			loongson_sysconf.dma_mask_bits > 64) {
 		loongson_sysconf.dma_mask_bits = 32;
+		dma_default_coherent = true;
+	} else {
+		dma_default_coherent = !eirq_source->dma_noncoherent;
+	}
+
+	pr_info("Firmware: Coherent DMA: %s\n", dma_default_coherent ? "on" : "off");
 
 	loongson_sysconf.restart_addr = boot_p->reset_system.ResetWarm;
 	loongson_sysconf.poweroff_addr = boot_p->reset_system.Shutdown;

[PATCH 6.1 189/194] netfilter: nft_set_pipapo: skip inactive elements during set walk

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Westphal <fw@strlen.de>

commit 317eb9685095678f2c9f5a8189de698c5354316a upstream.

Otherwise set elements can be deactivated twice which will cause a crash.

Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netfilter/nft_set_pipapo.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/net/netfilter/nft_set_pipapo.c
+++ b/net/netfilter/nft_set_pipapo.c
@@ -2042,6 +2042,9 @@ static void nft_pipapo_walk(const struct
 
 		e = f->mt[r].e;
 
+		if (!nft_set_elem_active(&e->ext, iter->genmask))
+			goto cont;
+
 		elem.priv = e;
 
 		iter->err = iter->fn(ctx, set, iter, &elem);

[PATCH 6.1 190/194] riscv: Kconfig: Add select ARM_AMBA to SOC_STARFIVE

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jia Jie Ho <jiajie.ho@starfivetech.com>

commit 78a03b9f8e6b317f7c65738a3fc60e1e85106a64 upstream.

Selects ARM_AMBA platform support for StarFive SoCs required by spi and
crypto dma engine.

Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
[ resolve conflict due to removal of "select SIFIVE_PLIC" ]
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/riscv/Kconfig.socs |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/riscv/Kconfig.socs
+++ b/arch/riscv/Kconfig.socs
@@ -23,6 +23,7 @@ config SOC_STARFIVE
 	select PINCTRL
 	select RESET_CONTROLLER
 	select SIFIVE_PLIC
+	select ARM_AMBA
 	help
 	  This enables support for StarFive SoC platform hardware.
 

[PATCH 6.1 191/194] drm/i915/display: Drop check for doublescan mode in modevalid

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ankit Nautiyal <ankit.k.nautiyal@intel.com>

[ Upstream commit 9d04eb20bc71a383b4d4e383b0b7fac8d38a2e34 ]

Since the DP/HDMI connector do not set connector->doublescan_allowed,
the doublescan modes will get automatically filtered during
drm_helper_probe_single_connector_modes().

Therefore check for double scan modes is not required and is dropped
from modevalid functions for both DP and HDMI.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221017143038.1748319-2-ankit.k.nautiyal@intel.com
Stable-dep-of: 20c2dbff342a ("drm/i915: Skip some timing checks on BXT/GLK DSI transcoders")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/i915/display/intel_dp.c   | 3 ---
 drivers/gpu/drm/i915/display/intel_hdmi.c | 3 ---
 2 files changed, 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 594ea037050a9..fd7c360bb44d7 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -973,9 +973,6 @@ intel_dp_mode_valid(struct drm_connector *_connector,
 	enum drm_mode_status status;
 	bool dsc = false, bigjoiner = false;
 
-	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
-		return MODE_NO_DBLESCAN;
-
 	if (mode->flags & DRM_MODE_FLAG_DBLCLK)
 		return MODE_H_ILLEGAL;
 
diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
index 7816b2a33feeb..4f31355d09a4e 100644
--- a/drivers/gpu/drm/i915/display/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
@@ -1987,9 +1987,6 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
 	bool has_hdmi_sink = intel_has_hdmi_sink(hdmi, connector->state);
 	bool ycbcr_420_only;
 
-	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
-		return MODE_NO_DBLESCAN;
-
 	if ((mode->flags & DRM_MODE_FLAG_3D_MASK) == DRM_MODE_FLAG_3D_FRAME_PACKING)
 		clock *= 2;
 
-- 
2.42.0

[PATCH 6.1 192/194] drm/i915/lvds: Use REG_BIT() & co.

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

[ Upstream commit 9dd56e979cb69f5cd904574c852b620777a2f69f ]

Use REG_BIT() & co. for the LVDS port register.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.8972-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Stable-dep-of: 20c2dbff342a ("drm/i915: Skip some timing checks on BXT/GLK DSI transcoders")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/i915/display/intel_lvds.c |  4 +-
 drivers/gpu/drm/i915/i915_reg.h           | 46 +++++++++++------------
 2 files changed, 24 insertions(+), 26 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_lvds.c b/drivers/gpu/drm/i915/display/intel_lvds.c
index a749a5a66d624..e4606d9a25edb 100644
--- a/drivers/gpu/drm/i915/display/intel_lvds.c
+++ b/drivers/gpu/drm/i915/display/intel_lvds.c
@@ -92,9 +92,9 @@ bool intel_lvds_port_enabled(struct drm_i915_private *dev_priv,
 
 	/* asserts want to know the pipe even if the port is disabled */
 	if (HAS_PCH_CPT(dev_priv))
-		*pipe = (val & LVDS_PIPE_SEL_MASK_CPT) >> LVDS_PIPE_SEL_SHIFT_CPT;
+		*pipe = REG_FIELD_GET(LVDS_PIPE_SEL_MASK_CPT, val);
 	else
-		*pipe = (val & LVDS_PIPE_SEL_MASK) >> LVDS_PIPE_SEL_SHIFT;
+		*pipe = REG_FIELD_GET(LVDS_PIPE_SEL_MASK, val);
 
 	return val & LVDS_PORT_EN;
 }
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 25015996f627a..c6766704340eb 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2681,52 +2681,50 @@
  * Enables the LVDS port.  This bit must be set before DPLLs are enabled, as
  * the DPLL semantics change when the LVDS is assigned to that pipe.
  */
-#define   LVDS_PORT_EN			(1 << 31)
+#define   LVDS_PORT_EN			REG_BIT(31)
 /* Selects pipe B for LVDS data.  Must be set on pre-965. */
-#define   LVDS_PIPE_SEL_SHIFT		30
-#define   LVDS_PIPE_SEL_MASK		(1 << 30)
-#define   LVDS_PIPE_SEL(pipe)		((pipe) << 30)
-#define   LVDS_PIPE_SEL_SHIFT_CPT	29
-#define   LVDS_PIPE_SEL_MASK_CPT	(3 << 29)
-#define   LVDS_PIPE_SEL_CPT(pipe)	((pipe) << 29)
+#define   LVDS_PIPE_SEL_MASK		REG_BIT(30)
+#define   LVDS_PIPE_SEL(pipe)		REG_FIELD_PREP(LVDS_PIPE_SEL_MASK, (pipe))
+#define   LVDS_PIPE_SEL_MASK_CPT	REG_GENMASK(30, 29)
+#define   LVDS_PIPE_SEL_CPT(pipe)	REG_FIELD_PREP(LVDS_PIPE_SEL_MASK_CPT, (pipe))
 /* LVDS dithering flag on 965/g4x platform */
-#define   LVDS_ENABLE_DITHER		(1 << 25)
+#define   LVDS_ENABLE_DITHER		REG_BIT(25)
 /* LVDS sync polarity flags. Set to invert (i.e. negative) */
-#define   LVDS_VSYNC_POLARITY		(1 << 21)
-#define   LVDS_HSYNC_POLARITY		(1 << 20)
+#define   LVDS_VSYNC_POLARITY		REG_BIT(21)
+#define   LVDS_HSYNC_POLARITY		REG_BIT(20)
 
 /* Enable border for unscaled (or aspect-scaled) display */
-#define   LVDS_BORDER_ENABLE		(1 << 15)
+#define   LVDS_BORDER_ENABLE		REG_BIT(15)
 /*
  * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per
  * pixel.
  */
-#define   LVDS_A0A2_CLKA_POWER_MASK	(3 << 8)
-#define   LVDS_A0A2_CLKA_POWER_DOWN	(0 << 8)
-#define   LVDS_A0A2_CLKA_POWER_UP	(3 << 8)
+#define   LVDS_A0A2_CLKA_POWER_MASK	REG_GENMASK(9, 8)
+#define   LVDS_A0A2_CLKA_POWER_DOWN	REG_FIELD_PREP(LVDS_A0A2_CLKA_POWER_MASK, 0)
+#define   LVDS_A0A2_CLKA_POWER_UP	REG_FIELD_PREP(LVDS_A0A2_CLKA_POWER_MASK, 3)
 /*
  * Controls the A3 data pair, which contains the additional LSBs for 24 bit
  * mode.  Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be
  * on.
  */
-#define   LVDS_A3_POWER_MASK		(3 << 6)
-#define   LVDS_A3_POWER_DOWN		(0 << 6)
-#define   LVDS_A3_POWER_UP		(3 << 6)
+#define   LVDS_A3_POWER_MASK		REG_GENMASK(7, 6)
+#define   LVDS_A3_POWER_DOWN		REG_FIELD_PREP(LVDS_A3_POWER_MASK, 0)
+#define   LVDS_A3_POWER_UP		REG_FIELD_PREP(LVDS_A3_POWER_MASK, 3)
 /*
  * Controls the CLKB pair.  This should only be set when LVDS_B0B3_POWER_UP
  * is set.
  */
-#define   LVDS_CLKB_POWER_MASK		(3 << 4)
-#define   LVDS_CLKB_POWER_DOWN		(0 << 4)
-#define   LVDS_CLKB_POWER_UP		(3 << 4)
+#define   LVDS_CLKB_POWER_MASK		REG_GENMASK(5, 4)
+#define   LVDS_CLKB_POWER_DOWN		REG_FIELD_PREP(LVDS_CLKB_POWER_MASK, 0)
+#define   LVDS_CLKB_POWER_UP		REG_FIELD_PREP(LVDS_CLKB_POWER_MASK, 3)
 /*
  * Controls the B0-B3 data pairs.  This must be set to match the DPLL p2
  * setting for whether we are in dual-channel mode.  The B3 pair will
  * additionally only be powered up when LVDS_A3_POWER_UP is set.
  */
-#define   LVDS_B0B3_POWER_MASK		(3 << 2)
-#define   LVDS_B0B3_POWER_DOWN		(0 << 2)
-#define   LVDS_B0B3_POWER_UP		(3 << 2)
+#define   LVDS_B0B3_POWER_MASK		REG_GENMASK(3, 2)
+#define   LVDS_B0B3_POWER_DOWN		REG_FIELD_PREP(LVDS_B0B3_POWER_MASK, 0)
+#define   LVDS_B0B3_POWER_UP		REG_FIELD_PREP(LVDS_B0B3_POWER_MASK, 3)
 
 /* Video Data Island Packet control */
 #define VIDEO_DIP_DATA		_MMIO(0x61178)
@@ -6461,7 +6459,7 @@
 #define FDI_PLL_CTL_2           _MMIO(0xfe004)
 
 #define PCH_LVDS	_MMIO(0xe1180)
-#define  LVDS_DETECTED	(1 << 1)
+#define   LVDS_DETECTED	REG_BIT(1)
 
 #define _PCH_DP_B		0xe4100
 #define PCH_DP_B		_MMIO(_PCH_DP_B)
-- 
2.42.0

[PATCH 6.1 193/194] drm/i915/sdvo: stop caching has_hdmi_monitor in struct intel_sdvo

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jani Nikula <jani.nikula@intel.com>

[ Upstream commit f2f9c8cb6421429ef166d6404426693212d0ca07 ]

Use the information stored in display info.

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3e9e1dcd554d470bdf474891a431b15e1880f9a0.1685437500.git.jani.nikula@intel.com
Stable-dep-of: 20c2dbff342a ("drm/i915: Skip some timing checks on BXT/GLK DSI transcoders")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/i915/display/intel_sdvo.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_sdvo.c b/drivers/gpu/drm/i915/display/intel_sdvo.c
index 2c2e0f041f869..c1a85128911e1 100644
--- a/drivers/gpu/drm/i915/display/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/display/intel_sdvo.c
@@ -115,7 +115,6 @@ struct intel_sdvo {
 
 	enum port port;
 
-	bool has_hdmi_monitor;
 	bool has_hdmi_audio;
 
 	/* DDC bus used by this SDVO encoder */
@@ -1278,10 +1277,13 @@ static void i9xx_adjust_sdvo_tv_clock(struct intel_crtc_state *pipe_config)
 	pipe_config->clock_set = true;
 }
 
-static bool intel_has_hdmi_sink(struct intel_sdvo *sdvo,
+static bool intel_has_hdmi_sink(struct intel_sdvo_connector *intel_sdvo_connector,
 				const struct drm_connector_state *conn_state)
 {
-	return sdvo->has_hdmi_monitor &&
+	struct drm_connector *connector = conn_state->connector;
+
+	return intel_sdvo_connector->is_hdmi &&
+		connector->display_info.is_hdmi &&
 		READ_ONCE(to_intel_digital_connector_state(conn_state)->force_audio) != HDMI_AUDIO_OFF_DVI;
 }
 
@@ -1360,7 +1362,7 @@ static int intel_sdvo_compute_config(struct intel_encoder *encoder,
 	pipe_config->pixel_multiplier =
 		intel_sdvo_get_pixel_multiplier(adjusted_mode);
 
-	pipe_config->has_hdmi_sink = intel_has_hdmi_sink(intel_sdvo, conn_state);
+	pipe_config->has_hdmi_sink = intel_has_hdmi_sink(intel_sdvo_connector, conn_state);
 
 	if (pipe_config->has_hdmi_sink) {
 		if (intel_sdvo_state->base.force_audio == HDMI_AUDIO_AUTO)
@@ -1875,7 +1877,7 @@ intel_sdvo_mode_valid(struct drm_connector *connector,
 	struct intel_sdvo_connector *intel_sdvo_connector =
 		to_intel_sdvo_connector(connector);
 	int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
-	bool has_hdmi_sink = intel_has_hdmi_sink(intel_sdvo, connector->state);
+	bool has_hdmi_sink = intel_has_hdmi_sink(intel_sdvo_connector, connector->state);
 	int clock = mode->clock;
 
 	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
@@ -2064,7 +2066,6 @@ intel_sdvo_tmds_sink_detect(struct drm_connector *connector)
 		if (edid->input & DRM_EDID_INPUT_DIGITAL) {
 			status = connector_status_connected;
 			if (intel_sdvo_connector->is_hdmi) {
-				intel_sdvo->has_hdmi_monitor = drm_detect_hdmi_monitor(edid);
 				intel_sdvo->has_hdmi_audio = drm_detect_monitor_audio(edid);
 			}
 		} else
@@ -2116,7 +2117,6 @@ intel_sdvo_detect(struct drm_connector *connector, bool force)
 
 	intel_sdvo->attached_output = response;
 
-	intel_sdvo->has_hdmi_monitor = false;
 	intel_sdvo->has_hdmi_audio = false;
 
 	if ((intel_sdvo_connector->output_flag & response) == 0)
-- 
2.42.0

[PATCH 6.1 194/194] drm/i915: Skip some timing checks on BXT/GLK DSI transcoders

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

[ Upstream commit 20c2dbff342aec13bf93c2f6c951da198916a455 ]

Apparently some BXT/GLK systems have DSI panels whose timings
don't agree with the normal cpu transcoder hblank>=32 limitation.
This is perhaps fine as there are no specific hblank/etc. limits
listed for the BXT/GLK DSI transcoders.

Move those checks out from the global intel_mode_valid() into
into connector specific .mode_valid() hooks, skipping BXT/GLK
DSI connectors. We'll leave the basic [hv]display/[hv]total
checks in intel_mode_valid() as those seem like sensible upper
limits regardless of the transcoder used.

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9720
Fixes: 8f4b1068e7fc ("drm/i915: Check some transcoder timing minimum limits")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit e0ef2daa8ca8ce4dbc2fd0959e383b753a87fd7d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/i915/display/icl_dsi.c       |  7 +++++++
 drivers/gpu/drm/i915/display/intel_crt.c     |  5 +++++
 drivers/gpu/drm/i915/display/intel_display.c | 10 ++++++++++
 drivers/gpu/drm/i915/display/intel_display.h |  3 +++
 drivers/gpu/drm/i915/display/intel_dp.c      |  4 ++++
 drivers/gpu/drm/i915/display/intel_dp_mst.c  |  4 ++++
 drivers/gpu/drm/i915/display/intel_dvo.c     |  6 ++++++
 drivers/gpu/drm/i915/display/intel_hdmi.c    |  4 ++++
 drivers/gpu/drm/i915/display/intel_lvds.c    |  5 +++++
 drivers/gpu/drm/i915/display/intel_sdvo.c    |  8 +++++++-
 drivers/gpu/drm/i915/display/intel_tv.c      |  8 +++++++-
 drivers/gpu/drm/i915/display/vlv_dsi.c       | 18 +++++++++++++++++-
 12 files changed, 79 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index 8219310025de5..f7422f0cf579d 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -1500,6 +1500,13 @@ static void gen11_dsi_post_disable(struct intel_atomic_state *state,
 static enum drm_mode_status gen11_dsi_mode_valid(struct drm_connector *connector,
 						 struct drm_display_mode *mode)
 {
+	struct drm_i915_private *i915 = to_i915(connector->dev);
+	enum drm_mode_status status;
+
+	status = intel_cpu_transcoder_mode_valid(i915, mode);
+	if (status != MODE_OK)
+		return status;
+
 	/* FIXME: DSC? */
 	return intel_dsi_mode_valid(connector, mode);
 }
diff --git a/drivers/gpu/drm/i915/display/intel_crt.c b/drivers/gpu/drm/i915/display/intel_crt.c
index 4a8ff2f976085..e60b2cf84b851 100644
--- a/drivers/gpu/drm/i915/display/intel_crt.c
+++ b/drivers/gpu/drm/i915/display/intel_crt.c
@@ -343,8 +343,13 @@ intel_crt_mode_valid(struct drm_connector *connector,
 	struct drm_device *dev = connector->dev;
 	struct drm_i915_private *dev_priv = to_i915(dev);
 	int max_dotclk = dev_priv->max_dotclk_freq;
+	enum drm_mode_status status;
 	int max_clock;
 
+	status = intel_cpu_transcoder_mode_valid(dev_priv, mode);
+	if (status != MODE_OK)
+		return status;
+
 	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 		return MODE_NO_DBLESCAN;
 
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 96e679a176e94..1777a12f2f421 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -8229,6 +8229,16 @@ intel_mode_valid(struct drm_device *dev,
 	    mode->vtotal > vtotal_max)
 		return MODE_V_ILLEGAL;
 
+	return MODE_OK;
+}
+
+enum drm_mode_status intel_cpu_transcoder_mode_valid(struct drm_i915_private *dev_priv,
+						     const struct drm_display_mode *mode)
+{
+	/*
+	 * Additional transcoder timing limits,
+	 * excluding BXT/GLK DSI transcoders.
+	 */
 	if (DISPLAY_VER(dev_priv) >= 5) {
 		if (mode->hdisplay < 64 ||
 		    mode->htotal - mode->hdisplay < 32)
diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
index 884e8e67b17c7..b4f941674357b 100644
--- a/drivers/gpu/drm/i915/display/intel_display.h
+++ b/drivers/gpu/drm/i915/display/intel_display.h
@@ -554,6 +554,9 @@ enum drm_mode_status
 intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
 				const struct drm_display_mode *mode,
 				bool bigjoiner);
+enum drm_mode_status
+intel_cpu_transcoder_mode_valid(struct drm_i915_private *i915,
+				const struct drm_display_mode *mode);
 enum phy intel_port_to_phy(struct drm_i915_private *i915, enum port port);
 bool is_trans_port_sync_mode(const struct intel_crtc_state *state);
 bool intel_crtc_is_bigjoiner_slave(const struct intel_crtc_state *crtc_state);
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index fd7c360bb44d7..5970f4149090f 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -973,6 +973,10 @@ intel_dp_mode_valid(struct drm_connector *_connector,
 	enum drm_mode_status status;
 	bool dsc = false, bigjoiner = false;
 
+	status = intel_cpu_transcoder_mode_valid(dev_priv, mode);
+	if (status != MODE_OK)
+		return status;
+
 	if (mode->flags & DRM_MODE_FLAG_DBLCLK)
 		return MODE_H_ILLEGAL;
 
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
index 9a6822256ddf6..eec32f682012c 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@@ -703,6 +703,10 @@ intel_dp_mst_mode_valid_ctx(struct drm_connector *connector,
 		return 0;
 	}
 
+	*status = intel_cpu_transcoder_mode_valid(dev_priv, mode);
+	if (*status != MODE_OK)
+		return 0;
+
 	if (mode->flags & DRM_MODE_FLAG_DBLSCAN) {
 		*status = MODE_NO_DBLESCAN;
 		return 0;
diff --git a/drivers/gpu/drm/i915/display/intel_dvo.c b/drivers/gpu/drm/i915/display/intel_dvo.c
index 5572e43026e4d..511c589070087 100644
--- a/drivers/gpu/drm/i915/display/intel_dvo.c
+++ b/drivers/gpu/drm/i915/display/intel_dvo.c
@@ -225,10 +225,16 @@ intel_dvo_mode_valid(struct drm_connector *connector,
 {
 	struct intel_connector *intel_connector = to_intel_connector(connector);
 	struct intel_dvo *intel_dvo = intel_attached_dvo(intel_connector);
+	struct drm_i915_private *i915 = to_i915(intel_connector->base.dev);
 	const struct drm_display_mode *fixed_mode =
 		intel_panel_fixed_mode(intel_connector, mode);
 	int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
 	int target_clock = mode->clock;
+	enum drm_mode_status status;
+
+	status = intel_cpu_transcoder_mode_valid(i915, mode);
+	if (status != MODE_OK)
+		return status;
 
 	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 		return MODE_NO_DBLESCAN;
diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
index 4f31355d09a4e..2600019fc8b96 100644
--- a/drivers/gpu/drm/i915/display/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
@@ -1987,6 +1987,10 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
 	bool has_hdmi_sink = intel_has_hdmi_sink(hdmi, connector->state);
 	bool ycbcr_420_only;
 
+	status = intel_cpu_transcoder_mode_valid(dev_priv, mode);
+	if (status != MODE_OK)
+		return status;
+
 	if ((mode->flags & DRM_MODE_FLAG_3D_MASK) == DRM_MODE_FLAG_3D_FRAME_PACKING)
 		clock *= 2;
 
diff --git a/drivers/gpu/drm/i915/display/intel_lvds.c b/drivers/gpu/drm/i915/display/intel_lvds.c
index e4606d9a25edb..40b5d3d3c7e14 100644
--- a/drivers/gpu/drm/i915/display/intel_lvds.c
+++ b/drivers/gpu/drm/i915/display/intel_lvds.c
@@ -389,11 +389,16 @@ intel_lvds_mode_valid(struct drm_connector *connector,
 		      struct drm_display_mode *mode)
 {
 	struct intel_connector *intel_connector = to_intel_connector(connector);
+	struct drm_i915_private *i915 = to_i915(intel_connector->base.dev);
 	const struct drm_display_mode *fixed_mode =
 		intel_panel_fixed_mode(intel_connector, mode);
 	int max_pixclk = to_i915(connector->dev)->max_dotclk_freq;
 	enum drm_mode_status status;
 
+	status = intel_cpu_transcoder_mode_valid(i915, mode);
+	if (status != MODE_OK)
+		return status;
+
 	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 		return MODE_NO_DBLESCAN;
 
diff --git a/drivers/gpu/drm/i915/display/intel_sdvo.c b/drivers/gpu/drm/i915/display/intel_sdvo.c
index c1a85128911e1..8294dddfd9de8 100644
--- a/drivers/gpu/drm/i915/display/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/display/intel_sdvo.c
@@ -1873,13 +1873,19 @@ static enum drm_mode_status
 intel_sdvo_mode_valid(struct drm_connector *connector,
 		      struct drm_display_mode *mode)
 {
+	struct drm_i915_private *i915 = to_i915(connector->dev);
 	struct intel_sdvo *intel_sdvo = intel_attached_sdvo(to_intel_connector(connector));
 	struct intel_sdvo_connector *intel_sdvo_connector =
 		to_intel_sdvo_connector(connector);
-	int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
 	bool has_hdmi_sink = intel_has_hdmi_sink(intel_sdvo_connector, connector->state);
+	int max_dotclk = i915->max_dotclk_freq;
+	enum drm_mode_status status;
 	int clock = mode->clock;
 
+	status = intel_cpu_transcoder_mode_valid(i915, mode);
+	if (status != MODE_OK)
+		return status;
+
 	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 		return MODE_NO_DBLESCAN;
 
diff --git a/drivers/gpu/drm/i915/display/intel_tv.c b/drivers/gpu/drm/i915/display/intel_tv.c
index dcf89d701f0f6..fb25be800e753 100644
--- a/drivers/gpu/drm/i915/display/intel_tv.c
+++ b/drivers/gpu/drm/i915/display/intel_tv.c
@@ -956,8 +956,14 @@ static enum drm_mode_status
 intel_tv_mode_valid(struct drm_connector *connector,
 		    struct drm_display_mode *mode)
 {
+	struct drm_i915_private *i915 = to_i915(connector->dev);
 	const struct tv_mode *tv_mode = intel_tv_mode_find(connector->state);
-	int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
+	int max_dotclk = i915->max_dotclk_freq;
+	enum drm_mode_status status;
+
+	status = intel_cpu_transcoder_mode_valid(i915, mode);
+	if (status != MODE_OK)
+		return status;
 
 	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 		return MODE_NO_DBLESCAN;
diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
index 00c80f29ad999..114088ca59ed4 100644
--- a/drivers/gpu/drm/i915/display/vlv_dsi.c
+++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
@@ -1627,9 +1627,25 @@ static const struct drm_encoder_funcs intel_dsi_funcs = {
 	.destroy = intel_dsi_encoder_destroy,
 };
 
+static enum drm_mode_status vlv_dsi_mode_valid(struct drm_connector *connector,
+					       struct drm_display_mode *mode)
+{
+	struct drm_i915_private *i915 = to_i915(connector->dev);
+
+	if (IS_VALLEYVIEW(i915) || IS_CHERRYVIEW(i915)) {
+		enum drm_mode_status status;
+
+		status = intel_cpu_transcoder_mode_valid(i915, mode);
+		if (status != MODE_OK)
+			return status;
+	}
+
+	return intel_dsi_mode_valid(connector, mode);
+}
+
 static const struct drm_connector_helper_funcs intel_dsi_connector_helper_funcs = {
 	.get_modes = intel_dsi_get_modes,
-	.mode_valid = intel_dsi_mode_valid,
+	.mode_valid = vlv_dsi_mode_valid,
 	.atomic_check = intel_digital_connector_atomic_check,
 };
 
-- 
2.42.0

Re: [PATCH 6.1 000/194] 6.1.68-rc1 review

[Florian Fainelli]

On 12/11/23 10:19, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.68 release.
> There are 194 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 13 Dec 2023 18:19:59 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.68-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on 
BMIPS_GENERIC:

Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian

Re: [PATCH 6.1 000/194] 6.1.68-rc1 review

[Kelsey Steele]

On Mon, Dec 11, 2023 at 07:19:50PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.68 release.
> There are 194 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 13 Dec 2023 18:19:59 +0000.
> Anything received after that time might be too late.

No regressions found on WSL (x86 and arm64).

Built, booted, and reviewed dmesg.

Thank you.

Tested-by: Kelsey Steele <kelseysteele@linux.microsoft.com> 

Re: [PATCH 6.1 000/194] 6.1.68-rc1 review

[Naresh Kamboju]

On Tue, 12 Dec 2023 at 00:15, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 6.1.68 release.
> There are 194 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 13 Dec 2023 18:19:59 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.68-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h


Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 6.1.68-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-6.1.y
* git commit: 807435a379b45e6eec975857b7daf5ac2b3fbf93
* git describe: v6.1.67-195-g807435a379b4
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.1.y/build/v6.1.67-195-g807435a379b4

## Test Regressions (compared to v6.1.66)

## Metric Regressions (compared to v6.1.66)

## Test Fixes (compared to v6.1.66)

## Metric Fixes (compared to v6.1.66)

## Test result summary
total: 136008, pass: 114767, fail: 2850, skip: 18250, xfail: 141

## Build Summary
* arc: 5 total, 5 passed, 0 failed
* arm: 151 total, 150 passed, 1 failed
* arm64: 52 total, 52 passed, 0 failed
* i386: 38 total, 38 passed, 0 failed
* mips: 26 total, 26 passed, 0 failed
* parisc: 4 total, 4 passed, 0 failed
* powerpc: 35 total, 35 passed, 0 failed
* riscv: 15 total, 15 passed, 0 failed
* s390: 16 total, 16 passed, 0 failed
* sh: 10 total, 10 passed, 0 failed
* sparc: 8 total, 8 passed, 0 failed
* x86_64: 46 total, 46 passed, 0 failed

## Test suites summary
* boot
* kselftest-android
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers-dma-buf
* kselftest-efivarfs
* kselftest-exec
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-filesystems-epoll
* kselftest-firmware
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-net-forwarding
* kselftest-net-mptcp
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-user_events
* kselftest-vDSO
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* libgpiod
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* perf
* rcutorture
* v4l2-compliance
* v4l2-complianciance

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 6.1 000/194] 6.1.68-rc1 review

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 371 bytes --]

On Mon, Dec 11, 2023 at 07:19:50PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.68 release.
> There are 194 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

Tested-by: Conor Dooley <conor.dooley@microchip.com>

Cheers,
Conor.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH 6.1 000/194] 6.1.68-rc1 review

[Shuah Khan]

On 12/11/23 11:19, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.68 release.
> There are 194 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 13 Dec 2023 18:19:59 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.68-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 6.1 000/194] 6.1.68-rc1 review

[Guenter Roeck]

On Mon, Dec 11, 2023 at 07:19:50PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.68 release.
> There are 194 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 13 Dec 2023 18:19:59 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 157 pass: 157 fail: 0
Qemu test results:
	total: 545 pass: 545 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 6.1 000/194] 6.1.68-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 659 bytes --]

Hi!

> This is the start of the stable review cycle for the 6.1.68 release.
> There are 194 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-6.1.y

Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Best regards,
                                                                Pavel
-- 
DENX Software Engineering GmbH,        Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

RTL8152_INACCESSIBLE was Re: [PATCH 6.1 000/194] 6.1.68-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1315 bytes --]

Hi!

> This is the start of the stable review cycle for the 6.1.68 release.
> There are 194 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.


> Douglas Anderson <dianders@chromium.org>
>     r8152: Add RTL8152_INACCESSIBLE to r8153_aldps_en()
> 
> Douglas Anderson <dianders@chromium.org>
>     r8152: Add RTL8152_INACCESSIBLE to r8153_pre_firmware_1()
> 
> Douglas Anderson <dianders@chromium.org>
>     r8152: Add RTL8152_INACCESSIBLE to r8156b_wait_loading_flash()
> 
> Douglas Anderson <dianders@chromium.org>
>     r8152: Add RTL8152_INACCESSIBLE checks to more loops
> 
> Douglas Anderson <dianders@chromium.org>
>     r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE

Central patch that actually fixes something is:

commit d9962b0d42029bcb40fe3c38bce06d1870fa4df4
Author: Douglas Anderson <dianders@chromium.org>
Date:   Fri Oct 20 14:06:59 2023 -0700

    r8152: Block future register access if register access fails

...but we don't have that in 6.1. So we should not need the rest,
either.

Best regards,
								Pavel
-- 
DENX Software Engineering GmbH,        Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: RTL8152_INACCESSIBLE was Re: [PATCH 6.1 000/194] 6.1.68-rc1 review

[Guenter Roeck]

On 12/12/23 12:08, Pavel Machek wrote:
> Hi!
> 
>> This is the start of the stable review cycle for the 6.1.68 release.
>> There are 194 patches in this series, all will be posted as a response
>> to this one.  If anyone has any issues with these being applied, please
>> let me know.
> 
> 
>> Douglas Anderson <dianders@chromium.org>
>>      r8152: Add RTL8152_INACCESSIBLE to r8153_aldps_en()
>>
>> Douglas Anderson <dianders@chromium.org>
>>      r8152: Add RTL8152_INACCESSIBLE to r8153_pre_firmware_1()
>>
>> Douglas Anderson <dianders@chromium.org>
>>      r8152: Add RTL8152_INACCESSIBLE to r8156b_wait_loading_flash()
>>
>> Douglas Anderson <dianders@chromium.org>
>>      r8152: Add RTL8152_INACCESSIBLE checks to more loops
>>
>> Douglas Anderson <dianders@chromium.org>
>>      r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE
> 
> Central patch that actually fixes something is:
> 
> commit d9962b0d42029bcb40fe3c38bce06d1870fa4df4
> Author: Douglas Anderson <dianders@chromium.org>
> Date:   Fri Oct 20 14:06:59 2023 -0700
> 
>      r8152: Block future register access if register access fails
> 
> ...but we don't have that in 6.1. So we should not need the rest,
> either.
> 

Also, the missing patch is fixed subsequently by another patch, so it can not
be added on its own.

Guenter

Re: [PATCH 6.1 000/194] 6.1.68-rc1 review

[Ron Economos]

On 12/11/23 10:19 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.68 release.
> There are 194 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 13 Dec 2023 18:19:59 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.68-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).

Tested-by: Ron Economos <re@w6rz.net>

Re: [PATCH 6.1 000/194] 6.1.68-rc1 review

[Jon Hunter]

On Mon, 11 Dec 2023 19:19:50 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.68 release.
> There are 194 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 13 Dec 2023 18:19:59 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.68-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v6.1:
    10 builds:	10 pass, 0 fail
    26 boots:	26 pass, 0 fail
    116 tests:	116 pass, 0 fail

Linux version:	6.1.68-rc1-g807435a379b4
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 6.1 000/194] 6.1.68-rc1 review

[SeongJae Park]

Hello,

On 2023-12-11T19:19:50+01:00 Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:

> This is the start of the stable review cycle for the 6.1.68 release.
> There are 194 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 13 Dec 2023 18:19:59 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.68-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> and the diffstat can be found below.

This rc kernel passes DAMON functionality test[1] on my test machine.
Attaching the test results summary below.  Please note that I retrieved the
kernel from linux-stable-rc tree[2].

Tested-by: SeongJae Park <sj@kernel.org>

[1] https://github.com/awslabs/damon-tests/tree/next/corr
[2] 807435a379b4 ("Linux 6.1.68-rc1")

Thanks,
SJ

[...]

---

ok 1 selftests: damon: debugfs_attrs.sh
ok 2 selftests: damon: debugfs_schemes.sh
ok 3 selftests: damon: debugfs_target_ids.sh
ok 4 selftests: damon: debugfs_empty_targets.sh
ok 5 selftests: damon: debugfs_huge_count_read_write.sh
ok 6 selftests: damon: debugfs_duplicate_context_creation.sh
ok 7 selftests: damon: sysfs.sh
ok 1 selftests: damon-tests: kunit.sh
ok 2 selftests: damon-tests: huge_count_read_write.sh
ok 3 selftests: damon-tests: buffer_overflow.sh
ok 4 selftests: damon-tests: rm_contexts.sh
ok 5 selftests: damon-tests: record_null_deref.sh
ok 6 selftests: damon-tests: dbgfs_target_ids_read_before_terminate_race.sh
ok 7 selftests: damon-tests: dbgfs_target_ids_pid_leak.sh
ok 8 selftests: damon-tests: damo_tests.sh
ok 9 selftests: damon-tests: masim-record.sh
ok 10 selftests: damon-tests: build_i386.sh
ok 11 selftests: damon-tests: build_arm64.sh
ok 12 selftests: damon-tests: build_i386_idle_flag.sh
ok 13 selftests: damon-tests: build_i386_highpte.sh
ok 14 selftests: damon-tests: build_nomemcg.sh
 [33m
 [92mPASS [39m

Re: RTL8152_INACCESSIBLE was Re: [PATCH 6.1 000/194] 6.1.68-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1711 bytes --]

Hi!

> > > This is the start of the stable review cycle for the 6.1.68 release.
> > > There are 194 patches in this series, all will be posted as a response
> > > to this one.  If anyone has any issues with these being applied, please
> > > let me know.
> > 
> > 
> > > Douglas Anderson <dianders@chromium.org>
> > >      r8152: Add RTL8152_INACCESSIBLE to r8153_aldps_en()
> > > 
> > > Douglas Anderson <dianders@chromium.org>
> > >      r8152: Add RTL8152_INACCESSIBLE to r8153_pre_firmware_1()
> > > 
> > > Douglas Anderson <dianders@chromium.org>
> > >      r8152: Add RTL8152_INACCESSIBLE to r8156b_wait_loading_flash()
> > > 
> > > Douglas Anderson <dianders@chromium.org>
> > >      r8152: Add RTL8152_INACCESSIBLE checks to more loops
> > > 
> > > Douglas Anderson <dianders@chromium.org>
> > >      r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE
> > 
> > Central patch that actually fixes something is:
> > 
> > commit d9962b0d42029bcb40fe3c38bce06d1870fa4df4
> > Author: Douglas Anderson <dianders@chromium.org>
> > Date:   Fri Oct 20 14:06:59 2023 -0700
> > 
> >      r8152: Block future register access if register access fails
> > 
> > ...but we don't have that in 6.1. So we should not need the rest,
> > either.
> > 
> 
> Also, the missing patch is fixed subsequently by another patch, so it can not
> be added on its own.

For the record I'm trying to advocate "drop all patches listed as they
don't fix the bug", not "add more", as this does not meet stable
criteria.

Best regards,
								Pavel
-- 
DENX Software Engineering GmbH,        Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: RTL8152_INACCESSIBLE was Re: [PATCH 6.1 000/194] 6.1.68-rc1 review

[Greg Kroah-Hartman]

On Wed, Dec 13, 2023 at 08:52:25AM +0100, Pavel Machek wrote:
> Hi!
> 
> > > > This is the start of the stable review cycle for the 6.1.68 release.
> > > > There are 194 patches in this series, all will be posted as a response
> > > > to this one.  If anyone has any issues with these being applied, please
> > > > let me know.
> > > 
> > > 
> > > > Douglas Anderson <dianders@chromium.org>
> > > >      r8152: Add RTL8152_INACCESSIBLE to r8153_aldps_en()
> > > > 
> > > > Douglas Anderson <dianders@chromium.org>
> > > >      r8152: Add RTL8152_INACCESSIBLE to r8153_pre_firmware_1()
> > > > 
> > > > Douglas Anderson <dianders@chromium.org>
> > > >      r8152: Add RTL8152_INACCESSIBLE to r8156b_wait_loading_flash()
> > > > 
> > > > Douglas Anderson <dianders@chromium.org>
> > > >      r8152: Add RTL8152_INACCESSIBLE checks to more loops
> > > > 
> > > > Douglas Anderson <dianders@chromium.org>
> > > >      r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE
> > > 
> > > Central patch that actually fixes something is:
> > > 
> > > commit d9962b0d42029bcb40fe3c38bce06d1870fa4df4
> > > Author: Douglas Anderson <dianders@chromium.org>
> > > Date:   Fri Oct 20 14:06:59 2023 -0700
> > > 
> > >      r8152: Block future register access if register access fails
> > > 
> > > ...but we don't have that in 6.1. So we should not need the rest,
> > > either.
> > > 
> > 
> > Also, the missing patch is fixed subsequently by another patch, so it can not
> > be added on its own.
> 
> For the record I'm trying to advocate "drop all patches listed as they
> don't fix the bug", not "add more", as this does not meet stable
> criteria.

But the original commit here does say it fixes a bug, see the text of
the commits listed above.  So perhaps someone got this all wrong when
they wrote the original commits that got merged into 6.7-rc?  Otherwise
this seems like they are sane to keep for now, unless the original
author says they should be dropped, or someone who can test this driver
says something went wrong.

thanks,

greg k-h

Re: RTL8152_INACCESSIBLE was Re: [PATCH 6.1 000/194] 6.1.68-rc1 review

[Doug Anderson]

Hi,

On Wed, Dec 13, 2023 at 12:50 AM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> On Wed, Dec 13, 2023 at 08:52:25AM +0100, Pavel Machek wrote:
> > Hi!
> >
> > > > > This is the start of the stable review cycle for the 6.1.68 release.
> > > > > There are 194 patches in this series, all will be posted as a response
> > > > > to this one.  If anyone has any issues with these being applied, please
> > > > > let me know.
> > > >
> > > >
> > > > > Douglas Anderson <dianders@chromium.org>
> > > > >      r8152: Add RTL8152_INACCESSIBLE to r8153_aldps_en()
> > > > >
> > > > > Douglas Anderson <dianders@chromium.org>
> > > > >      r8152: Add RTL8152_INACCESSIBLE to r8153_pre_firmware_1()
> > > > >
> > > > > Douglas Anderson <dianders@chromium.org>
> > > > >      r8152: Add RTL8152_INACCESSIBLE to r8156b_wait_loading_flash()
> > > > >
> > > > > Douglas Anderson <dianders@chromium.org>
> > > > >      r8152: Add RTL8152_INACCESSIBLE checks to more loops
> > > > >
> > > > > Douglas Anderson <dianders@chromium.org>
> > > > >      r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE
> > > >
> > > > Central patch that actually fixes something is:
> > > >
> > > > commit d9962b0d42029bcb40fe3c38bce06d1870fa4df4
> > > > Author: Douglas Anderson <dianders@chromium.org>
> > > > Date:   Fri Oct 20 14:06:59 2023 -0700
> > > >
> > > >      r8152: Block future register access if register access fails
> > > >
> > > > ...but we don't have that in 6.1. So we should not need the rest,
> > > > either.
> > > >
> > >
> > > Also, the missing patch is fixed subsequently by another patch, so it can not
> > > be added on its own.
> >
> > For the record I'm trying to advocate "drop all patches listed as they
> > don't fix the bug", not "add more", as this does not meet stable
> > criteria.
>
> But the original commit here does say it fixes a bug, see the text of
> the commits listed above.  So perhaps someone got this all wrong when
> they wrote the original commits that got merged into 6.7-rc?  Otherwise
> this seems like they are sane to keep for now, unless the original
> author says they should be dropped, or someone who can test this driver
> says something went wrong.

Right. The patches that "add RTL8152_INACCESSIBLE" to more loops are
bugfixes, but they're not terribly important ones to backport. While
they technically make sense even on older kernels and could
conceivably make the older kernels unload the r8152 driver a little
faster when a device is unplugged, it's not a big deal. On the first
version of the recent patches I didn't even add a "Fixes" tag for them
but I was asked to during the review process.

The "add RTL8152_INACCESSIBLE" patches become more important with
commit d9962b0d4202 ("r8152: Block future register access if register
access fails"). Once you have that it's possible to end up in the
"INACCESSIBLE" situation in response to normal (ish) error handling
and thus you want it to be faster.

Based on our experience in ChromeOS, commit d9962b0d4202 ("r8152:
Block future register access if register access fails") is a pretty
important fix and I would say it should be backported to stable.
Certainly we've backported it to our kernels in ChromeOS. In our case
we made things easier on ourselves by backporting pretty much all
patches to the r8152 driver.

-Doug

Re: RTL8152_INACCESSIBLE was Re: [PATCH 6.1 000/194] 6.1.68-rc1 review

[Greg Kroah-Hartman]

On Wed, Dec 13, 2023 at 07:16:52AM -0800, Doug Anderson wrote:
> Hi,
> 
> On Wed, Dec 13, 2023 at 12:50 AM Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > On Wed, Dec 13, 2023 at 08:52:25AM +0100, Pavel Machek wrote:
> > > Hi!
> > >
> > > > > > This is the start of the stable review cycle for the 6.1.68 release.
> > > > > > There are 194 patches in this series, all will be posted as a response
> > > > > > to this one.  If anyone has any issues with these being applied, please
> > > > > > let me know.
> > > > >
> > > > >
> > > > > > Douglas Anderson <dianders@chromium.org>
> > > > > >      r8152: Add RTL8152_INACCESSIBLE to r8153_aldps_en()
> > > > > >
> > > > > > Douglas Anderson <dianders@chromium.org>
> > > > > >      r8152: Add RTL8152_INACCESSIBLE to r8153_pre_firmware_1()
> > > > > >
> > > > > > Douglas Anderson <dianders@chromium.org>
> > > > > >      r8152: Add RTL8152_INACCESSIBLE to r8156b_wait_loading_flash()
> > > > > >
> > > > > > Douglas Anderson <dianders@chromium.org>
> > > > > >      r8152: Add RTL8152_INACCESSIBLE checks to more loops
> > > > > >
> > > > > > Douglas Anderson <dianders@chromium.org>
> > > > > >      r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE
> > > > >
> > > > > Central patch that actually fixes something is:
> > > > >
> > > > > commit d9962b0d42029bcb40fe3c38bce06d1870fa4df4
> > > > > Author: Douglas Anderson <dianders@chromium.org>
> > > > > Date:   Fri Oct 20 14:06:59 2023 -0700
> > > > >
> > > > >      r8152: Block future register access if register access fails
> > > > >
> > > > > ...but we don't have that in 6.1. So we should not need the rest,
> > > > > either.
> > > > >
> > > >
> > > > Also, the missing patch is fixed subsequently by another patch, so it can not
> > > > be added on its own.
> > >
> > > For the record I'm trying to advocate "drop all patches listed as they
> > > don't fix the bug", not "add more", as this does not meet stable
> > > criteria.
> >
> > But the original commit here does say it fixes a bug, see the text of
> > the commits listed above.  So perhaps someone got this all wrong when
> > they wrote the original commits that got merged into 6.7-rc?  Otherwise
> > this seems like they are sane to keep for now, unless the original
> > author says they should be dropped, or someone who can test this driver
> > says something went wrong.
> 
> Right. The patches that "add RTL8152_INACCESSIBLE" to more loops are
> bugfixes, but they're not terribly important ones to backport. While
> they technically make sense even on older kernels and could
> conceivably make the older kernels unload the r8152 driver a little
> faster when a device is unplugged, it's not a big deal. On the first
> version of the recent patches I didn't even add a "Fixes" tag for them
> but I was asked to during the review process.
> 
> The "add RTL8152_INACCESSIBLE" patches become more important with
> commit d9962b0d4202 ("r8152: Block future register access if register
> access fails"). Once you have that it's possible to end up in the
> "INACCESSIBLE" situation in response to normal (ish) error handling
> and thus you want it to be faster.
> 
> Based on our experience in ChromeOS, commit d9962b0d4202 ("r8152:
> Block future register access if register access fails") is a pretty
> important fix and I would say it should be backported to stable.
> Certainly we've backported it to our kernels in ChromeOS. In our case
> we made things easier on ourselves by backporting pretty much all
> patches to the r8152 driver.

Ok, as lots of fixes seem to be needed here, do you have a list of the
git ids that we should backport to bring this up to a workable state
like you have in your tree?

thanks,

greg k-h

Re: RTL8152_INACCESSIBLE was Re: [PATCH 6.1 000/194] 6.1.68-rc1 review

[Doug Anderson]

Hi,

On Wed, Dec 13, 2023 at 9:38 AM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> On Wed, Dec 13, 2023 at 07:16:52AM -0800, Doug Anderson wrote:
> > Hi,
> >
> > On Wed, Dec 13, 2023 at 12:50 AM Greg Kroah-Hartman
> > <gregkh@linuxfoundation.org> wrote:
> > >
> > > On Wed, Dec 13, 2023 at 08:52:25AM +0100, Pavel Machek wrote:
> > > > Hi!
> > > >
> > > > > > > This is the start of the stable review cycle for the 6.1.68 release.
> > > > > > > There are 194 patches in this series, all will be posted as a response
> > > > > > > to this one.  If anyone has any issues with these being applied, please
> > > > > > > let me know.
> > > > > >
> > > > > >
> > > > > > > Douglas Anderson <dianders@chromium.org>
> > > > > > >      r8152: Add RTL8152_INACCESSIBLE to r8153_aldps_en()
> > > > > > >
> > > > > > > Douglas Anderson <dianders@chromium.org>
> > > > > > >      r8152: Add RTL8152_INACCESSIBLE to r8153_pre_firmware_1()
> > > > > > >
> > > > > > > Douglas Anderson <dianders@chromium.org>
> > > > > > >      r8152: Add RTL8152_INACCESSIBLE to r8156b_wait_loading_flash()
> > > > > > >
> > > > > > > Douglas Anderson <dianders@chromium.org>
> > > > > > >      r8152: Add RTL8152_INACCESSIBLE checks to more loops
> > > > > > >
> > > > > > > Douglas Anderson <dianders@chromium.org>
> > > > > > >      r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE
> > > > > >
> > > > > > Central patch that actually fixes something is:
> > > > > >
> > > > > > commit d9962b0d42029bcb40fe3c38bce06d1870fa4df4
> > > > > > Author: Douglas Anderson <dianders@chromium.org>
> > > > > > Date:   Fri Oct 20 14:06:59 2023 -0700
> > > > > >
> > > > > >      r8152: Block future register access if register access fails
> > > > > >
> > > > > > ...but we don't have that in 6.1. So we should not need the rest,
> > > > > > either.
> > > > > >
> > > > >
> > > > > Also, the missing patch is fixed subsequently by another patch, so it can not
> > > > > be added on its own.
> > > >
> > > > For the record I'm trying to advocate "drop all patches listed as they
> > > > don't fix the bug", not "add more", as this does not meet stable
> > > > criteria.
> > >
> > > But the original commit here does say it fixes a bug, see the text of
> > > the commits listed above.  So perhaps someone got this all wrong when
> > > they wrote the original commits that got merged into 6.7-rc?  Otherwise
> > > this seems like they are sane to keep for now, unless the original
> > > author says they should be dropped, or someone who can test this driver
> > > says something went wrong.
> >
> > Right. The patches that "add RTL8152_INACCESSIBLE" to more loops are
> > bugfixes, but they're not terribly important ones to backport. While
> > they technically make sense even on older kernels and could
> > conceivably make the older kernels unload the r8152 driver a little
> > faster when a device is unplugged, it's not a big deal. On the first
> > version of the recent patches I didn't even add a "Fixes" tag for them
> > but I was asked to during the review process.
> >
> > The "add RTL8152_INACCESSIBLE" patches become more important with
> > commit d9962b0d4202 ("r8152: Block future register access if register
> > access fails"). Once you have that it's possible to end up in the
> > "INACCESSIBLE" situation in response to normal (ish) error handling
> > and thus you want it to be faster.
> >
> > Based on our experience in ChromeOS, commit d9962b0d4202 ("r8152:
> > Block future register access if register access fails") is a pretty
> > important fix and I would say it should be backported to stable.
> > Certainly we've backported it to our kernels in ChromeOS. In our case
> > we made things easier on ourselves by backporting pretty much all
> > patches to the r8152 driver.
>
> Ok, as lots of fixes seem to be needed here, do you have a list of the
> git ids that we should backport to bring this up to a workable state
> like you have in your tree?

The ones that were relevant to commit d9962b0d4202 ("r8152: Block
future register access if register access fails") were these, which is
basically the two series that I landed recently.:

79321a793945 r8152: Add RTL8152_INACCESSIBLE to r8153_aldps_en()
8c53a7bd7065 r8152: Add RTL8152_INACCESSIBLE to r8153_pre_firmware_1()
8a67b47fced9 r8152: Add RTL8152_INACCESSIBLE to r8156b_wait_loading_flash()
32a574c7e268 r8152: Add RTL8152_INACCESSIBLE checks to more loops
e62adaeecdc6 r8152: Hold the rtnl_lock for all of reset

d9962b0d4202 r8152: Block future register access if register access fails
715f67f33af4 r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE
bc65cc42af73 r8152: Check for unplug in r8153b_ups_en() / r8153c_ups_en()
dc90ba37a8c3 r8152: Check for unplug in rtl_phy_patch_request()
b8d35024d405 r8152: Release firmware if we have an error in probe
bb8adff9123e r8152: Cancel hw_phy_work if we have an error in probe
5dd176895269 r8152: Run the unload routine if we have errors during probe
a5feba71ec9c r8152: Increase USB control msg timeout to 5000ms as per spec

The problem, of course, is that picking commit d9962b0d4202 ("r8152:
Block future register access if register access fails") causes
conflicts with other changes that have happened to this driver. On
ChromeOS we generally resolve things like this by just picking the
extra patches. We already had quite a few backports to the ChromeOS
kernel trees, so I can't say it would be the same for stable branches.
On ChromeOS 5.15 you can see the picks that were needed at:

https://crrev.com/c/4857700

If you click "SHOW ALL (17)" then you can see the patches that I
uploaded together to get things resolved on our ChromeOS 5.15 branch.
There are also links to our 6.1, 5.10, and 5.4 branches.

One note is that as part of taking these extra patches we ended up
getting commit ec51fbd1b8a2 ("r8152: add USB device driver for config
selection") which caused a regression. That's where the following
recent changes that landed in your tree came from:

aa4f2b3e418e r8152: Choose our USB config with choose_configuration()
rather than probe()
a87b8e3be926 usb: core: Allow subclassed USB drivers to override
usb_choose_configuration()
c2d95fcff0f0 usb: core: Don't force USB generic_subclass drivers to
define probe()

...and where the (pending) extra patch came from:

https://lore.kernel.org/r/20231211073237.v3.1.If27eb3bf7812f91ab83810f232292f032f4203e0@changeid
("usb: core: Fix crash w/ usb_choose_configuration() if no driver")


-Doug